DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
authorSricharan R <r.sricharan@ti.com>
Tue, 3 Dec 2013 10:27:22 +0000 (15:57 +0530)
committerSricharan R <r.sricharan@ti.com>
Wed, 5 Feb 2014 14:38:00 +0000 (20:08 +0530)
In some socs the gic can be preceded by a crossbar IP which
routes the peripheral interrupts to the gic inputs. The peripheral
interrupts are associated with a fixed crossbar input line and the
crossbar routes that to one of the free gic input line.

The DT entries for peripherals provides the fixed crossbar input line
as its interrupt number and the mapping code should associate this with
a free gic input line. This patch adds the support inside the gic irqchip
to handle such routable irqs. The routable irqs are registered in a linear
domain. The registered routable domain's callback should be implemented
to get a free irq and to configure the IP to route it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Documentation/devicetree/bindings/arm/gic.txt
drivers/irqchip/irq-gic.c
include/linux/irqchip/arm-gic.h

index bae0d87a38b2bb4c6577e2a597c0ac7f501d1b2b..5573c08d3180b301a80990930c0da6259deff94f 100644 (file)
@@ -50,6 +50,11 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+                 connected from the peripherals, but are routed dynamically
+                 by a crossbar/multiplexer preceding the GIC. The GIC irq
+                 input line is assigned dynamically when the corresponding
+                 peripheral's crossbar line is mapped.
 Example:
 
        intc: interrupt-controller@fff11000 {
@@ -57,6 +62,7 @@ Example:
                #interrupt-cells = <3>;
                #address-cells = <1>;
                interrupt-controller;
+               arm,routable-irqs = <160>;
                reg = <0xfff11000 0x1000>,
                      <0xfff10100 0x100>;
        };
index 341c6016812de0e17fbd4c1601708723409351c5..07a7050841ec73ddd37d6f2053188924a26c197f 100644 (file)
@@ -824,16 +824,25 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
                irq_set_chip_and_handler(irq, &gic_chip,
                                         handle_fasteoi_irq);
                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+               gic_routable_irq_domain_ops->map(d, irq, hw);
        }
        irq_set_chip_data(irq, d->host_data);
        return 0;
 }
 
+static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+       gic_routable_irq_domain_ops->unmap(d, irq);
+}
+
 static int gic_irq_domain_xlate(struct irq_domain *d,
                                struct device_node *controller,
                                const u32 *intspec, unsigned int intsize,
                                unsigned long *out_hwirq, unsigned int *out_type)
 {
+       unsigned long ret = 0;
+
        if (d->of_node != controller)
                return -EINVAL;
        if (intsize < 3)
@@ -843,11 +852,20 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
        *out_hwirq = intspec[1] + 16;
 
        /* For SPIs, we need to add 16 more to get the GIC irq ID number */
-       if (!intspec[0])
-               *out_hwirq += 16;
+       if (!intspec[0]) {
+               ret = gic_routable_irq_domain_ops->xlate(d, controller,
+                                                        intspec,
+                                                        intsize,
+                                                        out_hwirq,
+                                                        out_type);
+
+               if (IS_ERR_VALUE(ret))
+                       return ret;
+       }
 
        *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
-       return 0;
+
+       return ret;
 }
 
 #ifdef CONFIG_SMP
@@ -871,9 +889,41 @@ static struct notifier_block gic_cpu_notifier = {
 
 const struct irq_domain_ops gic_irq_domain_ops = {
        .map = gic_irq_domain_map,
+       .unmap = gic_irq_domain_unmap,
        .xlate = gic_irq_domain_xlate,
 };
 
+/* Default functions for routable irq domain */
+static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
+                             irq_hw_number_t hw)
+{
+       return 0;
+}
+
+static void gic_routable_irq_domain_unmap(struct irq_domain *d,
+                                         unsigned int irq)
+{
+}
+
+static int gic_routable_irq_domain_xlate(struct irq_domain *d,
+                               struct device_node *controller,
+                               const u32 *intspec, unsigned int intsize,
+                               unsigned long *out_hwirq,
+                               unsigned int *out_type)
+{
+       *out_hwirq += 16;
+       return 0;
+}
+
+const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
+       .map = gic_routable_irq_domain_map,
+       .unmap = gic_routable_irq_domain_unmap,
+       .xlate = gic_routable_irq_domain_xlate,
+};
+
+const struct irq_domain_ops *gic_routable_irq_domain_ops =
+                                       &gic_default_routable_irq_domain_ops;
+
 void __init gic_init_bases(unsigned int gic_nr, int irq_start,
                           void __iomem *dist_base, void __iomem *cpu_base,
                           u32 percpu_offset, struct device_node *node)
@@ -881,6 +931,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
        irq_hw_number_t hwirq_base;
        struct gic_chip_data *gic;
        int gic_irqs, irq_base, i;
+       int nr_routable_irqs;
 
        BUG_ON(gic_nr >= MAX_GIC_NR);
 
@@ -946,14 +997,25 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
        gic->gic_irqs = gic_irqs;
 
        gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
-       irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
-       if (IS_ERR_VALUE(irq_base)) {
-               WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
-                    irq_start);
-               irq_base = irq_start;
+
+       if (of_property_read_u32(node, "arm,routable-irqs",
+                                &nr_routable_irqs)) {
+               irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
+                                          numa_node_id());
+               if (IS_ERR_VALUE(irq_base)) {
+                       WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+                            irq_start);
+                       irq_base = irq_start;
+               }
+
+               gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+                                       hwirq_base, &gic_irq_domain_ops, gic);
+       } else {
+               gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
+                                                   &gic_irq_domain_ops,
+                                                   gic);
        }
-       gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
-                                   hwirq_base, &gic_irq_domain_ops, gic);
+
        if (WARN_ON(!gic->domain))
                return;
 
index 0ceb389dba6c4136ecf718f661ede11ea9e271ab..7ed92d0560d59de9f4db4eab3d9940312807c417 100644 (file)
@@ -93,6 +93,11 @@ int gic_get_cpu_id(unsigned int cpu);
 void gic_migrate_target(unsigned int new_cpu_id);
 unsigned long gic_get_sgir_physaddr(void);
 
+extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
+static inline void __init register_routable_domain_ops
+                                       (const struct irq_domain_ops *ops)
+{
+       gic_routable_irq_domain_ops = ops;
+}
 #endif /* __ASSEMBLY */
-
 #endif
This page took 0.029226 seconds and 5 git commands to generate.