lose_these_too="${d30v_files} ${lose_these_too}"
fi
-v850_files="v850-opc.c v850-dis.c"
-
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
- keep_these_too="${v850_files} ${keep_these_too}"
-else
- if ( echo $* | grep keep\-v850e > /dev/null ) ; then
- keep_these_too="${v850_files} ${keep_these_too}"
- else
- if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
- keep_these_too="${v850_files} ${keep_these_too}"
- else
- lose_these_too="${v850_files} ${lose_these_too}"
- fi
- fi
-fi
-
tic80_files="tic80-opc.c tic80-dis.c"
if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
sysdep.h
w65-dis.c
w65-opc.h
+v850-opc.c
+v850-dis.c
z8k-dis.c
z8k-opc.h
z8kgen.c
done
fi
-v850_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
- for i in $v850_files ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping v850 stuff in $i
- fi
- fi
- done
-else
- for i in $v850_files ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"v850\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
v850e_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c v850-opc.c v850-dis.c"
-if ( echo $* | grep keep\-v850e > /dev/null ) ; then
- if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
+
+if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
for i in $v850e_files ; do
- if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if test -f $i && (grep sanitize-v850eq $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping v850e/v850eq stuff in $i
+ echo Keeping v850eq stuff in $i
fi
fi
done
- else
+else
for i in $v850e_files ; do
if test -f $i && (grep sanitize-v850eq $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
mv new $i
fi
done
- fi
-else
- if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
+fi
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
for i in $v850e_files ; do
- if test -f $i && (grep sanitize-v850eq $i > /dev/null) ; then
+ if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping v850e/v850eq stuff in $i
+ echo Keeping v850e stuff in $i
fi
fi
done
- else
+else
+ if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
+ true
+ else
for i in $v850e_files ; do
if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"v850e/v850eq\" from $i...
+ echo Removing traces of \"v850e\" from $i...
fi
cp $i new
sed '/start\-sanitize\-v850e/,/end\-sanitize\-v850e/d' < $i > new
mv new $i
fi
done
- fi
+ fi
fi
* mn10200-dis.c (disassemble): PC relative instructions are
relative to the next instruction, not the current instruction.
-start-sanitize-v850
Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
* v850-dis.c (disassemble): Only signed extend values that are not
Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (MOVHI): Immediate parameter is unsigned.
-end-sanitize-v850
Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
* disassemble.c (ARCH_all): Define ARCH_arc.
(disassembler): Add ARC support.
-start-sanitize-v850
Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
start-sanitize-v850eq
* v850-opc.c: Reorganised and re-layed out to improve readability
and portability.
-end-sanitize-v850
-
Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
* configure: Rebuild with autoconf 2.12.1.
* mips-opc.c: Add cast when setting mips_opcodes.
-start-sanitize-v850
Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
* v850-dis.c (disassemble): Fix sign extension problem.
* v850-opc.c (extract_d*): Fix sign extension problems to make
disassembly calculate branch offsets correctly.
-end-sanitize-v850
Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
* sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
* mn10300-dis.c (disassemble): Make sure all variables are initialized
before they are used.
-start-sanitize-v850
Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
* v850-opc.c (v850_opcodes): Put curly-braces around operands
for "breakpoint" instruction.
-end-sanitize-v850
Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
(dep): Use ALL_CFLAGS rather than CFLAGS.
-start-sanitize-v850
Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
flag.
-end-sanitize-v850
Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
* Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
(alpha_opcodes): Add new BWX, CIX, and MAX instructions.
Recategorize PALcode instructions.
-start-sanitize-v850
Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
* v850-opc.c (v850_opcodes): Add relaxing "jbr".
-end-sanitize-v850
Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
* mips-dis.c (_print_insn_mips): Don't print a trailing tab if
there are no operand types.
-start-sanitize-v850
Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
* v850-opc.c (D9_RELAX): Renamed from D9, all references
changed.
(v850_operands): Make sure D22 immediately follows D9_RELAX.
-end-sanitize-v850
Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
* i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
-start-sanitize-v850
Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
* v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
* v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
"bCC"instructions).
-end-sanitize-v850
Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
* mips-dis.c (_print_insn_mips): Use a tab between the instruction
* mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
field for movhu instruction.
-start-sanitize-v850
* v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
cast value to "long" not "signed long" to keep hpux10
compiler quiet.
-end-sanitize-v850
Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
* i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
accordingly. Don't declare functions using op_rtn.
-start-sanitize-v850
Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
* v850-dis.c (disassemble): Add memaddr argument. Re-arrange
bit operands.
* (v850_opcodes): Add breakpoint insn.
-end-sanitize-v850
Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
* m68k-opc.c: Move the fmovemx data register cases before the
* sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
-start-sanitize-v850
Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
* v850-dis.c (disassemble): Make static. Provide prototype.
* v850-opc.c (v850_opcodes): Add null opcode to mark the
end of the opcode table.
-end-sanitize-v850
Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (pre_defined_registers): Added register pairs,
"r0-r1", "r2-r3", etc.
-start-sanitize-v850
Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
* v850-opc.c (v850_operands): Make I16 be a signed operand.
* configure.in: (bfd_v850_arch) Add new case.
* v850-opc.c: New file.
-end-sanitize-v850
Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
* sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
# start-sanitize-tic80
bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
# end-sanitize-tic80
-# start-sanitize-v850
bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
-# end-sanitize-v850
# start-sanitize-v850e
bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
# end-sanitize-v850e
# start-sanitize-tic80
bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
# end-sanitize-tic80
-# start-sanitize-v850
bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
-# end-sanitize-v850
+# start-sanitize-v850e
+ bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+# end-sanitize-v850e
+# start-sanitize-v850eq
+ bfd_v850eq_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+# end-sanitize-v850eq
bfd_vax_arch) ;;
bfd_w65_arch) ta="$ta w65-dis.lo" ;;
bfd_we32k_arch) ;;
{ "jmp", one (0x0060), one (0xffe0), {R1}, 1 },
/* load/store instructions */
+/* start-sanitize-v850eq */
#ifdef ARCH_v850eq
{ "sld.bu", one (0x0300), one (0x0780), {D7, EP, R2_NOTR0}, 1 },
{ "sld.hu", one (0x0400), one (0x0780), {D8_7, EP, R2_NOTR0}, 1 },
{ "sld.b", one (0x0060), one (0x07f0), {D4, EP, R2}, 1 },
{ "sld.h", one (0x0070), one (0x07f0), {D5_4, EP, R2}, 1 },
#else
+/* end-sanitize-v850eq */
{ "sld.b", one (0x0300), one (0x0780), {D7, EP, R2}, 1 },
{ "sld.h", one (0x0400), one (0x0780), {D8_7, EP, R2}, 1 },
{ "sld.bu", one (0x0060), one (0x07f0), {D4, EP, R2_NOTR0}, 1 },
{ "sld.hu", one (0x0070), one (0x07f0), {D5_4, EP, R2_NOTR0}, 1 },
+/* start-sanitize-v850eq */
#endif
+/* end-sanitize-v850eq */
{ "sld.w", one (0x0500), one (0x0781), {D8_6, EP, R2}, 1 },
{ "sst.b", one (0x0380), one (0x0780), {R2, D7, EP}, 2 },
{ "sst.h", one (0x0480), one (0x0780), {R2, D8_7, EP}, 2 },
projects / deliverable / binutils-gdb.git / commitdiff
