depends on PPC_MULTIPLATFORM && PPC64
bool " IBM pSeries & new (POWER5-based) iSeries"
select PPC_I8259
+ select PPC_RTAS
+ select RTAS_ERROR_LOGGING
default y
config PPC_CHRP
depends on PPC_MULTIPLATFORM && PPC32
select PPC_I8259
select PPC_INDIRECT_PCI
+ select PPC_RTAS
default y
config PPC_PMAC
config PPC_BPA
bool " Broadband Processor Architecture"
depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_RTAS
config PPC_OF
bool
bool
default y
+config PPC_RTAS
+ bool
+ default n
+
+config RTAS_ERROR_LOGGING
+ bool
+ depends on PPC_RTAS
+ default n
+
config MPIC_BROKEN_U3
bool
depends on PPC_MAPLE
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
+obj-$(CONFIG_PPC_RTAS) += rtas.o
obj-$(CONFIG_IBMVIO) += vio.o
ifeq ($(CONFIG_PPC_MERGE),y)
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
+#include <asm/rtas.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/lppaca.h>
#include <asm/iSeries/HvLpEvent.h>
-#include <asm/rtas.h>
#include <asm/cache.h>
#include <asm/systemcfg.h>
#include <asm/compat.h>
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1));
DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
+#endif /* CONFIG_PPC64 */
/* RTAS */
DEFINE(RTASBASE, offsetof(struct rtas_t, base));
DEFINE(RTASENTRY, offsetof(struct rtas_t, entry));
-#endif /* CONFIG_PPC64 */
/* Interrupt register frame */
DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
* here so it's easy to add arch-specific sections later.
* -- Cort
*/
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
stwu r1,-INT_FRAME_SIZE(r1)
mflr r0
stw r0,INT_FRAME_SIZE+4(r1)
- lis r4,rtas_data@ha
- lwz r4,rtas_data@l(r4)
+ LOADADDR(r4, rtas)
lis r6,1f@ha /* physical return address for rtas */
addi r6,r6,1f@l
tophys(r6,r6)
tophys(r7,r1)
- lis r8,rtas_entry@ha
- lwz r8,rtas_entry@l(r8)
+ lwz r8,RTASENTRY(r4)
+ lwz r4,RTASBASE(r4)
mfmsr r9
stw r9,8(r1)
LOAD_MSR_KERNEL(r0,MSR_KERNEL)
MTMSRD(r0) /* don't get trashed */
li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtlr r6
- CLR_TOP32(r7)
mtspr SPRN_SPRG2,r7
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
twi 31,0,0
/* XXX load up BATs and panic */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_RTAS */
struct device_node *dflt_interrupt_controller;
int num_interrupt_controllers;
-u32 rtas_data;
-u32 rtas_entry;
-
/*
* Wrapper for allocating memory for various data that needs to be
* attached to device nodes as they are processed at boot or when
--- /dev/null
+/*
+ *
+ * Procedures for interfacing to the RTAS on CHRP machines.
+ *
+ * Peter Bergner, IBM March 2001.
+ * Copyright (C) 2001 IBM.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/semaphore.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/param.h>
+#include <asm/system.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/lmb.h>
+#ifdef CONFIG_PPC64
+#include <asm/systemcfg.h>
+#endif
+
+struct rtas_t rtas = {
+ .lock = SPIN_LOCK_UNLOCKED
+};
+
+EXPORT_SYMBOL(rtas);
+
+DEFINE_SPINLOCK(rtas_data_buf_lock);
+char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
+unsigned long rtas_rmo_buf;
+
+/*
+ * call_rtas_display_status and call_rtas_display_status_delay
+ * are designed only for very early low-level debugging, which
+ * is why the token is hard-coded to 10.
+ */
+void call_rtas_display_status(unsigned char c)
+{
+ struct rtas_args *args = &rtas.args;
+ unsigned long s;
+
+ if (!rtas.base)
+ return;
+ spin_lock_irqsave(&rtas.lock, s);
+
+ args->token = 10;
+ args->nargs = 1;
+ args->nret = 1;
+ args->rets = (rtas_arg_t *)&(args->args[1]);
+ args->args[0] = (int)c;
+
+ enter_rtas(__pa(args));
+
+ spin_unlock_irqrestore(&rtas.lock, s);
+}
+
+void call_rtas_display_status_delay(unsigned char c)
+{
+ static int pending_newline = 0; /* did last write end with unprinted newline? */
+ static int width = 16;
+
+ if (c == '\n') {
+ while (width-- > 0)
+ call_rtas_display_status(' ');
+ width = 16;
+ udelay(500000);
+ pending_newline = 1;
+ } else {
+ if (pending_newline) {
+ call_rtas_display_status('\r');
+ call_rtas_display_status('\n');
+ }
+ pending_newline = 0;
+ if (width--) {
+ call_rtas_display_status(c);
+ udelay(10000);
+ }
+ }
+}
+
+void rtas_progress(char *s, unsigned short hex)
+{
+ struct device_node *root;
+ int width, *p;
+ char *os;
+ static int display_character, set_indicator;
+ static int display_width, display_lines, *row_width, form_feed;
+ static DEFINE_SPINLOCK(progress_lock);
+ static int current_line;
+ static int pending_newline = 0; /* did last write end with unprinted newline? */
+
+ if (!rtas.base)
+ return;
+
+ if (display_width == 0) {
+ display_width = 0x10;
+ if ((root = find_path_device("/rtas"))) {
+ if ((p = (unsigned int *)get_property(root,
+ "ibm,display-line-length", NULL)))
+ display_width = *p;
+ if ((p = (unsigned int *)get_property(root,
+ "ibm,form-feed", NULL)))
+ form_feed = *p;
+ if ((p = (unsigned int *)get_property(root,
+ "ibm,display-number-of-lines", NULL)))
+ display_lines = *p;
+ row_width = (unsigned int *)get_property(root,
+ "ibm,display-truncation-length", NULL);
+ }
+ display_character = rtas_token("display-character");
+ set_indicator = rtas_token("set-indicator");
+ }
+
+ if (display_character == RTAS_UNKNOWN_SERVICE) {
+ /* use hex display if available */
+ if (set_indicator != RTAS_UNKNOWN_SERVICE)
+ rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex);
+ return;
+ }
+
+ spin_lock(&progress_lock);
+
+ /*
+ * Last write ended with newline, but we didn't print it since
+ * it would just clear the bottom line of output. Print it now
+ * instead.
+ *
+ * If no newline is pending and form feed is supported, clear the
+ * display with a form feed; otherwise, print a CR to start output
+ * at the beginning of the line.
+ */
+ if (pending_newline) {
+ rtas_call(display_character, 1, 1, NULL, '\r');
+ rtas_call(display_character, 1, 1, NULL, '\n');
+ pending_newline = 0;
+ } else {
+ current_line = 0;
+ if (form_feed)
+ rtas_call(display_character, 1, 1, NULL,
+ (char)form_feed);
+ else
+ rtas_call(display_character, 1, 1, NULL, '\r');
+ }
+
+ if (row_width)
+ width = row_width[current_line];
+ else
+ width = display_width;
+ os = s;
+ while (*os) {
+ if (*os == '\n' || *os == '\r') {
+ /* If newline is the last character, save it
+ * until next call to avoid bumping up the
+ * display output.
+ */
+ if (*os == '\n' && !os[1]) {
+ pending_newline = 1;
+ current_line++;
+ if (current_line > display_lines-1)
+ current_line = display_lines-1;
+ spin_unlock(&progress_lock);
+ return;
+ }
+
+ /* RTAS wants CR-LF, not just LF */
+
+ if (*os == '\n') {
+ rtas_call(display_character, 1, 1, NULL, '\r');
+ rtas_call(display_character, 1, 1, NULL, '\n');
+ } else {
+ /* CR might be used to re-draw a line, so we'll
+ * leave it alone and not add LF.
+ */
+ rtas_call(display_character, 1, 1, NULL, *os);
+ }
+
+ if (row_width)
+ width = row_width[current_line];
+ else
+ width = display_width;
+ } else {
+ width--;
+ rtas_call(display_character, 1, 1, NULL, *os);
+ }
+
+ os++;
+
+ /* if we overwrite the screen length */
+ if (width <= 0)
+ while ((*os != 0) && (*os != '\n') && (*os != '\r'))
+ os++;
+ }
+
+ spin_unlock(&progress_lock);
+}
+
+int rtas_token(const char *service)
+{
+ int *tokp;
+ if (rtas.dev == NULL)
+ return RTAS_UNKNOWN_SERVICE;
+ tokp = (int *) get_property(rtas.dev, service, NULL);
+ return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
+}
+
+#ifdef CONFIG_RTAS_ERROR_LOGGING
+/*
+ * Return the firmware-specified size of the error log buffer
+ * for all rtas calls that require an error buffer argument.
+ * This includes 'check-exception' and 'rtas-last-error'.
+ */
+int rtas_get_error_log_max(void)
+{
+ static int rtas_error_log_max;
+ if (rtas_error_log_max)
+ return rtas_error_log_max;
+
+ rtas_error_log_max = rtas_token ("rtas-error-log-max");
+ if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) ||
+ (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) {
+ printk (KERN_WARNING "RTAS: bad log buffer size %d\n",
+ rtas_error_log_max);
+ rtas_error_log_max = RTAS_ERROR_LOG_MAX;
+ }
+ return rtas_error_log_max;
+}
+EXPORT_SYMBOL(rtas_get_error_log_max);
+
+
+char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+int rtas_last_error_token;
+
+/** Return a copy of the detailed error text associated with the
+ * most recent failed call to rtas. Because the error text
+ * might go stale if there are any other intervening rtas calls,
+ * this routine must be called atomically with whatever produced
+ * the error (i.e. with rtas.lock still held from the previous call).
+ */
+static char *__fetch_rtas_last_error(char *altbuf)
+{
+ struct rtas_args err_args, save_args;
+ u32 bufsz;
+ char *buf = NULL;
+
+ if (rtas_last_error_token == -1)
+ return NULL;
+
+ bufsz = rtas_get_error_log_max();
+
+ err_args.token = rtas_last_error_token;
+ err_args.nargs = 2;
+ err_args.nret = 1;
+ err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf);
+ err_args.args[1] = bufsz;
+ err_args.args[2] = 0;
+
+ save_args = rtas.args;
+ rtas.args = err_args;
+
+ enter_rtas(__pa(&rtas.args));
+
+ err_args = rtas.args;
+ rtas.args = save_args;
+
+ /* Log the error in the unlikely case that there was one. */
+ if (unlikely(err_args.args[2] == 0)) {
+ if (altbuf) {
+ buf = altbuf;
+ } else {
+ buf = rtas_err_buf;
+ if (mem_init_done)
+ buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
+ }
+ if (buf)
+ memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
+ }
+
+ return buf;
+}
+
+#define get_errorlog_buffer() kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL)
+
+#else /* CONFIG_RTAS_ERROR_LOGGING */
+#define __fetch_rtas_last_error(x) NULL
+#define get_errorlog_buffer() NULL
+#endif
+
+int rtas_call(int token, int nargs, int nret, int *outputs, ...)
+{
+ va_list list;
+ int i;
+ unsigned long s;
+ struct rtas_args *rtas_args;
+ char *buff_copy = NULL;
+ int ret;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -1;
+
+ /* Gotta do something different here, use global lock for now... */
+ spin_lock_irqsave(&rtas.lock, s);
+ rtas_args = &rtas.args;
+
+ rtas_args->token = token;
+ rtas_args->nargs = nargs;
+ rtas_args->nret = nret;
+ rtas_args->rets = (rtas_arg_t *)&(rtas_args->args[nargs]);
+ va_start(list, outputs);
+ for (i = 0; i < nargs; ++i)
+ rtas_args->args[i] = va_arg(list, rtas_arg_t);
+ va_end(list);
+
+ for (i = 0; i < nret; ++i)
+ rtas_args->rets[i] = 0;
+
+ enter_rtas(__pa(rtas_args));
+
+ /* A -1 return code indicates that the last command couldn't
+ be completed due to a hardware error. */
+ if (rtas_args->rets[0] == -1)
+ buff_copy = __fetch_rtas_last_error(NULL);
+
+ if (nret > 1 && outputs != NULL)
+ for (i = 0; i < nret-1; ++i)
+ outputs[i] = rtas_args->rets[i+1];
+ ret = (nret > 0)? rtas_args->rets[0]: 0;
+
+ /* Gotta do something different here, use global lock for now... */
+ spin_unlock_irqrestore(&rtas.lock, s);
+
+ if (buff_copy) {
+ log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
+ if (mem_init_done)
+ kfree(buff_copy);
+ }
+ return ret;
+}
+
+/* Given an RTAS status code of 990n compute the hinted delay of 10^n
+ * (last digit) milliseconds. For now we bound at n=5 (100 sec).
+ */
+unsigned int rtas_extended_busy_delay_time(int status)
+{
+ int order = status - 9900;
+ unsigned long ms;
+
+ if (order < 0)
+ order = 0; /* RTC depends on this for -2 clock busy */
+ else if (order > 5)
+ order = 5; /* bound */
+
+ /* Use microseconds for reasonable accuracy */
+ for (ms = 1; order > 0; order--)
+ ms *= 10;
+
+ return ms;
+}
+
+int rtas_error_rc(int rtas_rc)
+{
+ int rc;
+
+ switch (rtas_rc) {
+ case -1: /* Hardware Error */
+ rc = -EIO;
+ break;
+ case -3: /* Bad indicator/domain/etc */
+ rc = -EINVAL;
+ break;
+ case -9000: /* Isolation error */
+ rc = -EFAULT;
+ break;
+ case -9001: /* Outstanding TCE/PTE */
+ rc = -EEXIST;
+ break;
+ case -9002: /* No usable slot */
+ rc = -ENODEV;
+ break;
+ default:
+ printk(KERN_ERR "%s: unexpected RTAS error %d\n",
+ __FUNCTION__, rtas_rc);
+ rc = -ERANGE;
+ break;
+ }
+ return rc;
+}
+
+int rtas_get_power_level(int powerdomain, int *level)
+{
+ int token = rtas_token("get-power-level");
+ int rc;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -ENOENT;
+
+ while ((rc = rtas_call(token, 1, 2, level, powerdomain)) == RTAS_BUSY)
+ udelay(1);
+
+ if (rc < 0)
+ return rtas_error_rc(rc);
+ return rc;
+}
+
+int rtas_set_power_level(int powerdomain, int level, int *setlevel)
+{
+ int token = rtas_token("set-power-level");
+ unsigned int wait_time;
+ int rc;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -ENOENT;
+
+ while (1) {
+ rc = rtas_call(token, 2, 2, setlevel, powerdomain, level);
+ if (rc == RTAS_BUSY)
+ udelay(1);
+ else if (rtas_is_extended_busy(rc)) {
+ wait_time = rtas_extended_busy_delay_time(rc);
+ udelay(wait_time * 1000);
+ } else
+ break;
+ }
+
+ if (rc < 0)
+ return rtas_error_rc(rc);
+ return rc;
+}
+
+int rtas_get_sensor(int sensor, int index, int *state)
+{
+ int token = rtas_token("get-sensor-state");
+ unsigned int wait_time;
+ int rc;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -ENOENT;
+
+ while (1) {
+ rc = rtas_call(token, 2, 2, state, sensor, index);
+ if (rc == RTAS_BUSY)
+ udelay(1);
+ else if (rtas_is_extended_busy(rc)) {
+ wait_time = rtas_extended_busy_delay_time(rc);
+ udelay(wait_time * 1000);
+ } else
+ break;
+ }
+
+ if (rc < 0)
+ return rtas_error_rc(rc);
+ return rc;
+}
+
+int rtas_set_indicator(int indicator, int index, int new_value)
+{
+ int token = rtas_token("set-indicator");
+ unsigned int wait_time;
+ int rc;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -ENOENT;
+
+ while (1) {
+ rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
+ if (rc == RTAS_BUSY)
+ udelay(1);
+ else if (rtas_is_extended_busy(rc)) {
+ wait_time = rtas_extended_busy_delay_time(rc);
+ udelay(wait_time * 1000);
+ }
+ else
+ break;
+ }
+
+ if (rc < 0)
+ return rtas_error_rc(rc);
+ return rc;
+}
+
+void rtas_restart(char *cmd)
+{
+ printk("RTAS system-reboot returned %d\n",
+ rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
+ for (;;);
+}
+
+void rtas_power_off(void)
+{
+ /* allow power on only with power button press */
+ printk("RTAS power-off returned %d\n",
+ rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
+ for (;;);
+}
+
+void rtas_halt(void)
+{
+ rtas_power_off();
+}
+
+/* Must be in the RMO region, so we place it here */
+static char rtas_os_term_buf[2048];
+
+void rtas_os_term(char *str)
+{
+ int status;
+
+ if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
+ return;
+
+ snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
+
+ do {
+ status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
+ __pa(rtas_os_term_buf));
+
+ if (status == RTAS_BUSY)
+ udelay(1);
+ else if (status != 0)
+ printk(KERN_EMERG "ibm,os-term call failed %d\n",
+ status);
+ } while (status == RTAS_BUSY);
+}
+
+
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
+{
+ struct rtas_args args;
+ unsigned long flags;
+ char *buff_copy, *errbuf = NULL;
+ int nargs;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
+ return -EFAULT;
+
+ nargs = args.nargs;
+ if (nargs > ARRAY_SIZE(args.args)
+ || args.nret > ARRAY_SIZE(args.args)
+ || nargs + args.nret > ARRAY_SIZE(args.args))
+ return -EINVAL;
+
+ /* Copy in args. */
+ if (copy_from_user(args.args, uargs->args,
+ nargs * sizeof(rtas_arg_t)) != 0)
+ return -EFAULT;
+
+ buff_copy = get_errorlog_buffer();
+
+ spin_lock_irqsave(&rtas.lock, flags);
+
+ rtas.args = args;
+ enter_rtas(__pa(&rtas.args));
+ args = rtas.args;
+
+ args.rets = &args.args[nargs];
+
+ /* A -1 return code indicates that the last command couldn't
+ be completed due to a hardware error. */
+ if (args.rets[0] == -1)
+ errbuf = __fetch_rtas_last_error(buff_copy);
+
+ spin_unlock_irqrestore(&rtas.lock, flags);
+
+ if (buff_copy) {
+ if (errbuf)
+ log_error(errbuf, ERR_TYPE_RTAS_LOG, 0);
+ kfree(buff_copy);
+ }
+
+ /* Copy out args. */
+ if (copy_to_user(uargs->args + nargs,
+ args.args + nargs,
+ args.nret * sizeof(rtas_arg_t)) != 0)
+ return -EFAULT;
+
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+/* This version can't take the spinlock, because it never returns */
+
+struct rtas_args rtas_stop_self_args = {
+ /* The token is initialized for real in setup_system() */
+ .token = RTAS_UNKNOWN_SERVICE,
+ .nargs = 0,
+ .nret = 1,
+ .rets = &rtas_stop_self_args.args[0],
+};
+
+void rtas_stop_self(void)
+{
+ struct rtas_args *rtas_args = &rtas_stop_self_args;
+
+ local_irq_disable();
+
+ BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE);
+
+ printk("cpu %u (hwid %u) Ready to die...\n",
+ smp_processor_id(), hard_smp_processor_id());
+ enter_rtas(__pa(rtas_args));
+
+ panic("Alas, I survived.\n");
+}
+#endif
+
+/*
+ * Call early during boot, before mem init or bootmem, to retreive the RTAS
+ * informations from the device-tree and allocate the RMO buffer for userland
+ * accesses.
+ */
+void __init rtas_initialize(void)
+{
+ unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
+
+ /* Get RTAS dev node and fill up our "rtas" structure with infos
+ * about it.
+ */
+ rtas.dev = of_find_node_by_name(NULL, "rtas");
+ if (rtas.dev) {
+ u32 *basep, *entryp;
+ u32 *sizep;
+
+ basep = (u32 *)get_property(rtas.dev, "linux,rtas-base", NULL);
+ sizep = (u32 *)get_property(rtas.dev, "rtas-size", NULL);
+ if (basep != NULL && sizep != NULL) {
+ rtas.base = *basep;
+ rtas.size = *sizep;
+ entryp = (u32 *)get_property(rtas.dev, "linux,rtas-entry", NULL);
+ if (entryp == NULL) /* Ugh */
+ rtas.entry = rtas.base;
+ else
+ rtas.entry = *entryp;
+ } else
+ rtas.dev = NULL;
+ }
+ if (!rtas.dev)
+ return;
+
+ /* If RTAS was found, allocate the RMO buffer for it and look for
+ * the stop-self token if any
+ */
+#ifdef CONFIG_PPC64
+ if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
+ rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+#endif
+ rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+
+#ifdef CONFIG_HOTPLUG_CPU
+ rtas_stop_self_args.token = rtas_token("stop-self");
+#endif /* CONFIG_HOTPLUG_CPU */
+#ifdef CONFIG_RTAS_ERROR_LOGGING
+ rtas_last_error_token = rtas_token("rtas-last-error");
+#endif
+}
+
+
+EXPORT_SYMBOL(rtas_token);
+EXPORT_SYMBOL(rtas_call);
+EXPORT_SYMBOL(rtas_data_buf);
+EXPORT_SYMBOL(rtas_data_buf_lock);
+EXPORT_SYMBOL(rtas_extended_busy_delay_time);
+EXPORT_SYMBOL(rtas_get_sensor);
+EXPORT_SYMBOL(rtas_get_power_level);
+EXPORT_SYMBOL(rtas_set_power_level);
+EXPORT_SYMBOL(rtas_set_indicator);
depends on PPC_PSERIES
default y if !EMBEDDED
-config PPC_RTAS
- bool
- depends on PPC_PSERIES || PPC_BPA
- default y
-
config RTAS_PROC
bool "Proc interface to RTAS"
depends on PPC_RTAS
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
- setup.o iommu.o ras.o
+ setup.o iommu.o rtas-fw.o ras.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_IBMVIO) += vio.o
--- /dev/null
+/*
+ *
+ * Procedures for firmware flash updates on pSeries systems.
+ *
+ * Peter Bergner, IBM March 2001.
+ * Copyright (C) 2001 IBM.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/semaphore.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/param.h>
+#include <asm/system.h>
+#include <asm/abs_addr.h>
+#include <asm/udbg.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/systemcfg.h>
+
+#include "rtas-fw.h"
+
+struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+
+#define FLASH_BLOCK_LIST_VERSION (1UL)
+
+static void rtas_flash_firmware(void)
+{
+ unsigned long image_size;
+ struct flash_block_list *f, *next, *flist;
+ unsigned long rtas_block_list;
+ int i, status, update_token;
+
+ update_token = rtas_token("ibm,update-flash-64-and-reboot");
+ if (update_token == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
+ printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
+ return;
+ }
+
+ /* NOTE: the "first" block list is a global var with no data
+ * blocks in the kernel data segment. We do this because
+ * we want to ensure this block_list addr is under 4GB.
+ */
+ rtas_firmware_flash_list.num_blocks = 0;
+ flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+ rtas_block_list = virt_to_abs(flist);
+ if (rtas_block_list >= 4UL*1024*1024*1024) {
+ printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+ return;
+ }
+
+ printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
+ /* Update the block_list in place. */
+ image_size = 0;
+ for (f = flist; f; f = next) {
+ /* Translate data addrs to absolute */
+ for (i = 0; i < f->num_blocks; i++) {
+ f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+ image_size += f->blocks[i].length;
+ }
+ next = f->next;
+ /* Don't translate NULL pointer for last entry */
+ if (f->next)
+ f->next = (struct flash_block_list *)virt_to_abs(f->next);
+ else
+ f->next = NULL;
+ /* make num_blocks into the version/length field */
+ f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
+ }
+
+ printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
+ printk(KERN_ALERT "FLASH: performing flash and reboot\n");
+ rtas_progress("Flashing \n", 0x0);
+ rtas_progress("Please Wait... ", 0x0);
+ printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
+ status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
+ switch (status) { /* should only get "bad" status */
+ case 0:
+ printk(KERN_ALERT "FLASH: success\n");
+ break;
+ case -1:
+ printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
+ break;
+ case -3:
+ printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
+ break;
+ case -4:
+ printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
+ break;
+ default:
+ printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
+ break;
+ }
+}
+
+void rtas_flash_bypass_warning(void)
+{
+ printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
+ printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
+}
+
+
+void rtas_fw_restart(char *cmd)
+{
+ if (rtas_firmware_flash_list.next)
+ rtas_flash_firmware();
+ rtas_restart(cmd);
+}
+
+void rtas_fw_power_off(void)
+{
+ if (rtas_firmware_flash_list.next)
+ rtas_flash_bypass_warning();
+ rtas_power_off();
+}
+
+void rtas_fw_halt(void)
+{
+ if (rtas_firmware_flash_list.next)
+ rtas_flash_bypass_warning();
+ rtas_halt();
+}
+
+EXPORT_SYMBOL(rtas_firmware_flash_list);
--- /dev/null
+void rtas_fw_restart(char *cmd);
+void rtas_fw_power_off(void);
+void rtas_fw_halt(void);
/*
- * linux/arch/ppc/kernel/setup.c
+ * 64-bit pSeries and RS/6000 setup code.
*
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
#include <asm/i8259.h>
#include <asm/udbg.h>
+#include "rtas-fw.h"
+
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
.pcibios_fixup = pSeries_final_fixup,
.pci_probe_mode = pSeries_pci_probe_mode,
.irq_bus_setup = pSeries_irq_bus_setup,
- .restart = rtas_restart,
- .power_off = rtas_power_off,
- .halt = rtas_halt,
+ .restart = rtas_fw_restart,
+ .power_off = rtas_fw_power_off,
+ .halt = rtas_fw_halt,
.panic = rtas_os_term,
.cpu_die = pSeries_mach_cpu_die,
.get_boot_time = rtas_get_boot_time,
depends on PPC_PSERIES || PPC_BPA
default y
+config RTAS_ERROR_LOGGING
+ bool
+ depends on PPC_RTAS
+ default y
+
config RTAS_PROC
bool "Proc interface to RTAS"
depends on PPC_RTAS
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_MODULES) += ppc_ksyms.o
endif
-obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o
+obj-$(CONFIG_PPC_RTAS) += rtas_pci.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
+++ /dev/null
-/*
- *
- * Procedures for interfacing to the RTAS on CHRP machines.
- *
- * Peter Bergner, IBM March 2001.
- * Copyright (C) 2001 IBM.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <stdarg.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/prom.h>
-#include <asm/rtas.h>
-#include <asm/semaphore.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/param.h>
-#include <asm/system.h>
-#include <asm/abs_addr.h>
-#include <asm/udbg.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/systemcfg.h>
-#include <asm/ppcdebug.h>
-
-struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
-
-struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
-};
-
-EXPORT_SYMBOL(rtas);
-
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-
-DEFINE_SPINLOCK(rtas_data_buf_lock);
-char rtas_data_buf[RTAS_DATA_BUF_SIZE]__page_aligned;
-unsigned long rtas_rmo_buf;
-
-void
-call_rtas_display_status(unsigned char c)
-{
- struct rtas_args *args = &rtas.args;
- unsigned long s;
-
- if (!rtas.base)
- return;
- spin_lock_irqsave(&rtas.lock, s);
-
- args->token = 10;
- args->nargs = 1;
- args->nret = 1;
- args->rets = (rtas_arg_t *)&(args->args[1]);
- args->args[0] = (int)c;
-
- enter_rtas(__pa(args));
-
- spin_unlock_irqrestore(&rtas.lock, s);
-}
-
-void
-call_rtas_display_status_delay(unsigned char c)
-{
- static int pending_newline = 0; /* did last write end with unprinted newline? */
- static int width = 16;
-
- if (c == '\n') {
- while (width-- > 0)
- call_rtas_display_status(' ');
- width = 16;
- udelay(500000);
- pending_newline = 1;
- } else {
- if (pending_newline) {
- call_rtas_display_status('\r');
- call_rtas_display_status('\n');
- }
- pending_newline = 0;
- if (width--) {
- call_rtas_display_status(c);
- udelay(10000);
- }
- }
-}
-
-void
-rtas_progress(char *s, unsigned short hex)
-{
- struct device_node *root;
- int width, *p;
- char *os;
- static int display_character, set_indicator;
- static int display_width, display_lines, *row_width, form_feed;
- static DEFINE_SPINLOCK(progress_lock);
- static int current_line;
- static int pending_newline = 0; /* did last write end with unprinted newline? */
-
- if (!rtas.base)
- return;
-
- if (display_width == 0) {
- display_width = 0x10;
- if ((root = find_path_device("/rtas"))) {
- if ((p = (unsigned int *)get_property(root,
- "ibm,display-line-length", NULL)))
- display_width = *p;
- if ((p = (unsigned int *)get_property(root,
- "ibm,form-feed", NULL)))
- form_feed = *p;
- if ((p = (unsigned int *)get_property(root,
- "ibm,display-number-of-lines", NULL)))
- display_lines = *p;
- row_width = (unsigned int *)get_property(root,
- "ibm,display-truncation-length", NULL);
- }
- display_character = rtas_token("display-character");
- set_indicator = rtas_token("set-indicator");
- }
-
- if (display_character == RTAS_UNKNOWN_SERVICE) {
- /* use hex display if available */
- if (set_indicator != RTAS_UNKNOWN_SERVICE)
- rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex);
- return;
- }
-
- spin_lock(&progress_lock);
-
- /*
- * Last write ended with newline, but we didn't print it since
- * it would just clear the bottom line of output. Print it now
- * instead.
- *
- * If no newline is pending and form feed is supported, clear the
- * display with a form feed; otherwise, print a CR to start output
- * at the beginning of the line.
- */
- if (pending_newline) {
- rtas_call(display_character, 1, 1, NULL, '\r');
- rtas_call(display_character, 1, 1, NULL, '\n');
- pending_newline = 0;
- } else {
- current_line = 0;
- if (form_feed)
- rtas_call(display_character, 1, 1, NULL,
- (char)form_feed);
- else
- rtas_call(display_character, 1, 1, NULL, '\r');
- }
-
- if (row_width)
- width = row_width[current_line];
- else
- width = display_width;
- os = s;
- while (*os) {
- if (*os == '\n' || *os == '\r') {
- /* If newline is the last character, save it
- * until next call to avoid bumping up the
- * display output.
- */
- if (*os == '\n' && !os[1]) {
- pending_newline = 1;
- current_line++;
- if (current_line > display_lines-1)
- current_line = display_lines-1;
- spin_unlock(&progress_lock);
- return;
- }
-
- /* RTAS wants CR-LF, not just LF */
-
- if (*os == '\n') {
- rtas_call(display_character, 1, 1, NULL, '\r');
- rtas_call(display_character, 1, 1, NULL, '\n');
- } else {
- /* CR might be used to re-draw a line, so we'll
- * leave it alone and not add LF.
- */
- rtas_call(display_character, 1, 1, NULL, *os);
- }
-
- if (row_width)
- width = row_width[current_line];
- else
- width = display_width;
- } else {
- width--;
- rtas_call(display_character, 1, 1, NULL, *os);
- }
-
- os++;
-
- /* if we overwrite the screen length */
- if (width <= 0)
- while ((*os != 0) && (*os != '\n') && (*os != '\r'))
- os++;
- }
-
- spin_unlock(&progress_lock);
-}
-
-int
-rtas_token(const char *service)
-{
- int *tokp;
- if (rtas.dev == NULL) {
- PPCDBG(PPCDBG_RTAS,"\tNo rtas device in device-tree...\n");
- return RTAS_UNKNOWN_SERVICE;
- }
- tokp = (int *) get_property(rtas.dev, service, NULL);
- return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
-}
-
-/*
- * Return the firmware-specified size of the error log buffer
- * for all rtas calls that require an error buffer argument.
- * This includes 'check-exception' and 'rtas-last-error'.
- */
-int rtas_get_error_log_max(void)
-{
- static int rtas_error_log_max;
- if (rtas_error_log_max)
- return rtas_error_log_max;
-
- rtas_error_log_max = rtas_token ("rtas-error-log-max");
- if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) ||
- (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) {
- printk (KERN_WARNING "RTAS: bad log buffer size %d\n", rtas_error_log_max);
- rtas_error_log_max = RTAS_ERROR_LOG_MAX;
- }
- return rtas_error_log_max;
-}
-
-
-/** Return a copy of the detailed error text associated with the
- * most recent failed call to rtas. Because the error text
- * might go stale if there are any other intervening rtas calls,
- * this routine must be called atomically with whatever produced
- * the error (i.e. with rtas.lock still held from the previous call).
- */
-static int
-__fetch_rtas_last_error(void)
-{
- struct rtas_args err_args, save_args;
- u32 bufsz;
-
- bufsz = rtas_get_error_log_max();
-
- err_args.token = rtas_token("rtas-last-error");
- err_args.nargs = 2;
- err_args.nret = 1;
-
- err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf);
- err_args.args[1] = bufsz;
- err_args.args[2] = 0;
-
- save_args = rtas.args;
- rtas.args = err_args;
-
- enter_rtas(__pa(&rtas.args));
-
- err_args = rtas.args;
- rtas.args = save_args;
-
- return err_args.args[2];
-}
-
-int rtas_call(int token, int nargs, int nret, int *outputs, ...)
-{
- va_list list;
- int i, logit = 0;
- unsigned long s;
- struct rtas_args *rtas_args;
- char * buff_copy = NULL;
- int ret;
-
- PPCDBG(PPCDBG_RTAS, "Entering rtas_call\n");
- PPCDBG(PPCDBG_RTAS, "\ttoken = 0x%x\n", token);
- PPCDBG(PPCDBG_RTAS, "\tnargs = %d\n", nargs);
- PPCDBG(PPCDBG_RTAS, "\tnret = %d\n", nret);
- PPCDBG(PPCDBG_RTAS, "\t&outputs = 0x%lx\n", outputs);
- if (token == RTAS_UNKNOWN_SERVICE)
- return -1;
-
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
- rtas_args = &rtas.args;
-
- rtas_args->token = token;
- rtas_args->nargs = nargs;
- rtas_args->nret = nret;
- rtas_args->rets = (rtas_arg_t *)&(rtas_args->args[nargs]);
- va_start(list, outputs);
- for (i = 0; i < nargs; ++i) {
- rtas_args->args[i] = va_arg(list, rtas_arg_t);
- PPCDBG(PPCDBG_RTAS, "\tnarg[%d] = 0x%x\n", i, rtas_args->args[i]);
- }
- va_end(list);
-
- for (i = 0; i < nret; ++i)
- rtas_args->rets[i] = 0;
-
- PPCDBG(PPCDBG_RTAS, "\tentering rtas with 0x%lx\n",
- __pa(rtas_args));
- enter_rtas(__pa(rtas_args));
- PPCDBG(PPCDBG_RTAS, "\treturned from rtas ...\n");
-
- /* A -1 return code indicates that the last command couldn't
- be completed due to a hardware error. */
- if (rtas_args->rets[0] == -1)
- logit = (__fetch_rtas_last_error() == 0);
-
- ifppcdebug(PPCDBG_RTAS) {
- for(i=0; i < nret ;i++)
- udbg_printf("\tnret[%d] = 0x%lx\n", i, (ulong)rtas_args->rets[i]);
- }
-
- if (nret > 1 && outputs != NULL)
- for (i = 0; i < nret-1; ++i)
- outputs[i] = rtas_args->rets[i+1];
- ret = (nret > 0)? rtas_args->rets[0]: 0;
-
- /* Log the error in the unlikely case that there was one. */
- if (unlikely(logit)) {
- buff_copy = rtas_err_buf;
- if (mem_init_done) {
- buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
- if (buff_copy)
- memcpy(buff_copy, rtas_err_buf,
- RTAS_ERROR_LOG_MAX);
- }
- }
-
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
-
- if (buff_copy) {
- log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
- if (mem_init_done)
- kfree(buff_copy);
- }
- return ret;
-}
-
-/* Given an RTAS status code of 990n compute the hinted delay of 10^n
- * (last digit) milliseconds. For now we bound at n=5 (100 sec).
- */
-unsigned int
-rtas_extended_busy_delay_time(int status)
-{
- int order = status - 9900;
- unsigned long ms;
-
- if (order < 0)
- order = 0; /* RTC depends on this for -2 clock busy */
- else if (order > 5)
- order = 5; /* bound */
-
- /* Use microseconds for reasonable accuracy */
- for (ms=1; order > 0; order--)
- ms *= 10;
-
- return ms;
-}
-
-int rtas_error_rc(int rtas_rc)
-{
- int rc;
-
- switch (rtas_rc) {
- case -1: /* Hardware Error */
- rc = -EIO;
- break;
- case -3: /* Bad indicator/domain/etc */
- rc = -EINVAL;
- break;
- case -9000: /* Isolation error */
- rc = -EFAULT;
- break;
- case -9001: /* Outstanding TCE/PTE */
- rc = -EEXIST;
- break;
- case -9002: /* No usable slot */
- rc = -ENODEV;
- break;
- default:
- printk(KERN_ERR "%s: unexpected RTAS error %d\n",
- __FUNCTION__, rtas_rc);
- rc = -ERANGE;
- break;
- }
- return rc;
-}
-
-int rtas_get_power_level(int powerdomain, int *level)
-{
- int token = rtas_token("get-power-level");
- int rc;
-
- if (token == RTAS_UNKNOWN_SERVICE)
- return -ENOENT;
-
- while ((rc = rtas_call(token, 1, 2, level, powerdomain)) == RTAS_BUSY)
- udelay(1);
-
- if (rc < 0)
- return rtas_error_rc(rc);
- return rc;
-}
-
-int rtas_set_power_level(int powerdomain, int level, int *setlevel)
-{
- int token = rtas_token("set-power-level");
- unsigned int wait_time;
- int rc;
-
- if (token == RTAS_UNKNOWN_SERVICE)
- return -ENOENT;
-
- while (1) {
- rc = rtas_call(token, 2, 2, setlevel, powerdomain, level);
- if (rc == RTAS_BUSY)
- udelay(1);
- else if (rtas_is_extended_busy(rc)) {
- wait_time = rtas_extended_busy_delay_time(rc);
- udelay(wait_time * 1000);
- } else
- break;
- }
-
- if (rc < 0)
- return rtas_error_rc(rc);
- return rc;
-}
-
-int rtas_get_sensor(int sensor, int index, int *state)
-{
- int token = rtas_token("get-sensor-state");
- unsigned int wait_time;
- int rc;
-
- if (token == RTAS_UNKNOWN_SERVICE)
- return -ENOENT;
-
- while (1) {
- rc = rtas_call(token, 2, 2, state, sensor, index);
- if (rc == RTAS_BUSY)
- udelay(1);
- else if (rtas_is_extended_busy(rc)) {
- wait_time = rtas_extended_busy_delay_time(rc);
- udelay(wait_time * 1000);
- } else
- break;
- }
-
- if (rc < 0)
- return rtas_error_rc(rc);
- return rc;
-}
-
-int rtas_set_indicator(int indicator, int index, int new_value)
-{
- int token = rtas_token("set-indicator");
- unsigned int wait_time;
- int rc;
-
- if (token == RTAS_UNKNOWN_SERVICE)
- return -ENOENT;
-
- while (1) {
- rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
- if (rc == RTAS_BUSY)
- udelay(1);
- else if (rtas_is_extended_busy(rc)) {
- wait_time = rtas_extended_busy_delay_time(rc);
- udelay(wait_time * 1000);
- }
- else
- break;
- }
-
- if (rc < 0)
- return rtas_error_rc(rc);
- return rc;
-}
-
-#define FLASH_BLOCK_LIST_VERSION (1UL)
-static void
-rtas_flash_firmware(void)
-{
- unsigned long image_size;
- struct flash_block_list *f, *next, *flist;
- unsigned long rtas_block_list;
- int i, status, update_token;
-
- update_token = rtas_token("ibm,update-flash-64-and-reboot");
- if (update_token == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
- printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
- return;
- }
-
- /* NOTE: the "first" block list is a global var with no data
- * blocks in the kernel data segment. We do this because
- * we want to ensure this block_list addr is under 4GB.
- */
- rtas_firmware_flash_list.num_blocks = 0;
- flist = (struct flash_block_list *)&rtas_firmware_flash_list;
- rtas_block_list = virt_to_abs(flist);
- if (rtas_block_list >= 4UL*1024*1024*1024) {
- printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
- return;
- }
-
- printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
- /* Update the block_list in place. */
- image_size = 0;
- for (f = flist; f; f = next) {
- /* Translate data addrs to absolute */
- for (i = 0; i < f->num_blocks; i++) {
- f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
- image_size += f->blocks[i].length;
- }
- next = f->next;
- /* Don't translate NULL pointer for last entry */
- if (f->next)
- f->next = (struct flash_block_list *)virt_to_abs(f->next);
- else
- f->next = NULL;
- /* make num_blocks into the version/length field */
- f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
- }
-
- printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
- printk(KERN_ALERT "FLASH: performing flash and reboot\n");
- rtas_progress("Flashing \n", 0x0);
- rtas_progress("Please Wait... ", 0x0);
- printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
- status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
- switch (status) { /* should only get "bad" status */
- case 0:
- printk(KERN_ALERT "FLASH: success\n");
- break;
- case -1:
- printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
- break;
- case -3:
- printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
- break;
- case -4:
- printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
- break;
- default:
- printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
- break;
- }
-}
-
-void rtas_flash_bypass_warning(void)
-{
- printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
- printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
-}
-
-
-void
-rtas_restart(char *cmd)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_firmware();
-
- printk("RTAS system-reboot returned %d\n",
- rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
- for (;;);
-}
-
-void
-rtas_power_off(void)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_bypass_warning();
- /* allow power on only with power button press */
- printk("RTAS power-off returned %d\n",
- rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
- for (;;);
-}
-
-void
-rtas_halt(void)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_bypass_warning();
- rtas_power_off();
-}
-
-/* Must be in the RMO region, so we place it here */
-static char rtas_os_term_buf[2048];
-
-void rtas_os_term(char *str)
-{
- int status;
-
- if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
- return;
-
- snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
-
- do {
- status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
- __pa(rtas_os_term_buf));
-
- if (status == RTAS_BUSY)
- udelay(1);
- else if (status != 0)
- printk(KERN_EMERG "ibm,os-term call failed %d\n",
- status);
- } while (status == RTAS_BUSY);
-}
-
-
-asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
-{
- struct rtas_args args;
- unsigned long flags;
- char * buff_copy;
- int nargs;
- int err_rc = 0;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
- return -EFAULT;
-
- nargs = args.nargs;
- if (nargs > ARRAY_SIZE(args.args)
- || args.nret > ARRAY_SIZE(args.args)
- || nargs + args.nret > ARRAY_SIZE(args.args))
- return -EINVAL;
-
- /* Copy in args. */
- if (copy_from_user(args.args, uargs->args,
- nargs * sizeof(rtas_arg_t)) != 0)
- return -EFAULT;
-
- buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL);
-
- spin_lock_irqsave(&rtas.lock, flags);
-
- rtas.args = args;
- enter_rtas(__pa(&rtas.args));
- args = rtas.args;
-
- args.rets = &args.args[nargs];
-
- /* A -1 return code indicates that the last command couldn't
- be completed due to a hardware error. */
- if (args.rets[0] == -1) {
- err_rc = __fetch_rtas_last_error();
- if ((err_rc == 0) && buff_copy) {
- memcpy(buff_copy, rtas_err_buf, RTAS_ERROR_LOG_MAX);
- }
- }
-
- spin_unlock_irqrestore(&rtas.lock, flags);
-
- if (buff_copy) {
- if ((args.rets[0] == -1) && (err_rc == 0)) {
- log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
- }
- kfree(buff_copy);
- }
-
- /* Copy out args. */
- if (copy_to_user(uargs->args + nargs,
- args.args + nargs,
- args.nret * sizeof(rtas_arg_t)) != 0)
- return -EFAULT;
-
- return 0;
-}
-
-/* This version can't take the spinlock, because it never returns */
-
-struct rtas_args rtas_stop_self_args = {
- /* The token is initialized for real in setup_system() */
- .token = RTAS_UNKNOWN_SERVICE,
- .nargs = 0,
- .nret = 1,
- .rets = &rtas_stop_self_args.args[0],
-};
-
-void rtas_stop_self(void)
-{
- struct rtas_args *rtas_args = &rtas_stop_self_args;
-
- local_irq_disable();
-
- BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE);
-
- printk("cpu %u (hwid %u) Ready to die...\n",
- smp_processor_id(), hard_smp_processor_id());
- enter_rtas(__pa(rtas_args));
-
- panic("Alas, I survived.\n");
-}
-
-/*
- * Call early during boot, before mem init or bootmem, to retreive the RTAS
- * informations from the device-tree and allocate the RMO buffer for userland
- * accesses.
- */
-void __init rtas_initialize(void)
-{
- /* Get RTAS dev node and fill up our "rtas" structure with infos
- * about it.
- */
- rtas.dev = of_find_node_by_name(NULL, "rtas");
- if (rtas.dev) {
- u32 *basep, *entryp;
- u32 *sizep;
-
- basep = (u32 *)get_property(rtas.dev, "linux,rtas-base", NULL);
- sizep = (u32 *)get_property(rtas.dev, "rtas-size", NULL);
- if (basep != NULL && sizep != NULL) {
- rtas.base = *basep;
- rtas.size = *sizep;
- entryp = (u32 *)get_property(rtas.dev, "linux,rtas-entry", NULL);
- if (entryp == NULL) /* Ugh */
- rtas.entry = rtas.base;
- else
- rtas.entry = *entryp;
- } else
- rtas.dev = NULL;
- }
- /* If RTAS was found, allocate the RMO buffer for it and look for
- * the stop-self token if any
- */
- if (rtas.dev) {
- unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
- if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
- rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
-
- rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE,
- rtas_region);
-
-#ifdef CONFIG_HOTPLUG_CPU
- rtas_stop_self_args.token = rtas_token("stop-self");
-#endif /* CONFIG_HOTPLUG_CPU */
- }
-
-}
-
-
-EXPORT_SYMBOL(rtas_firmware_flash_list);
-EXPORT_SYMBOL(rtas_token);
-EXPORT_SYMBOL(rtas_call);
-EXPORT_SYMBOL(rtas_data_buf);
-EXPORT_SYMBOL(rtas_data_buf_lock);
-EXPORT_SYMBOL(rtas_extended_busy_delay_time);
-EXPORT_SYMBOL(rtas_get_sensor);
-EXPORT_SYMBOL(rtas_get_power_level);
-EXPORT_SYMBOL(rtas_set_power_level);
-EXPORT_SYMBOL(rtas_set_indicator);
-EXPORT_SYMBOL(rtas_get_error_log_max);
projects / deliverable / linux.git / commitdiff
