Fix file references in Kconfig files

This patch fixes file references to moved or deleted files
outside of Documentation/.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 17addacb169eb4a6e0c5ca16e3f39d849b3035f4..408b055c585f489e9f3a76c66f32da6680be8d91 100644 (file)
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -282,8 +282,8 @@ config ETRAX_RTC
          Enables drivers for the Real-Time Clock battery-backed chips on
          some products. The kernel reads the time when booting, and
          the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
-         rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
-         device.  You can check the time with cat /proc/rtc, but
+         rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
+         /dev/rtc device.  You can check the time with cat /proc/rtc, but
          normal time reading should be done using libc function time and
          friends.
 

diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index adc164e99339b44e49321a269a61de21c8232ee2..df9a38b4f18faa58e82c8d44ec9539e7378f9a01 100644 (file)
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -24,8 +24,8 @@ config ETRAX_PA_LEDS
        help
          The ETRAX network driver is responsible for flashing LED's when
          packets arrive and are sent.  It uses macros defined in
-         <file:include/asm-cris/io.h>, and those macros are defined after what
-         YOU choose in this option.  The actual bits used are configured
+         <file:arch/cris/include/asm/io.h>, and those macros are defined after
+         what YOU choose in this option.  The actual bits used are configured
          separately.  Select this if the LEDs are on port PA.  Some products
          put the leds on PB or a memory-mapped latch (CSP0) instead.
 
@@ -34,8 +34,8 @@ config ETRAX_PB_LEDS
        help
          The ETRAX network driver is responsible for flashing LED's when
          packets arrive and are sent.  It uses macros defined in
-         <file:include/asm-cris/io.h>, and those macros are defined after what
-         YOU choose in this option.  The actual bits used are configured
+         <file:arch/cris/include/asm/io.h>, and those macros are defined after
+         what YOU choose in this option.  The actual bits used are configured
          separately.  Select this if the LEDs are on port PB.  Some products
          put the leds on PA or a memory-mapped latch (CSP0) instead.
 
@@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS
        help
          The ETRAX network driver is responsible for flashing LED's when
          packets arrive and are sent. It uses macros defined in
-         <file:include/asm-cris/io.h>, and those macros are defined after what
-         YOU choose in this option.  The actual bits used are configured
+         <file:arch/cris/include/asm/io.h>, and those macros are defined after
+         what YOU choose in this option.  The actual bits used are configured
          separately.  Select this if the LEDs are on a memory-mapped latch
          using chip select CSP0, this is mapped at 0x90000000.
          Some products put the leds on PA or PB instead.

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a015e18e6a470ace112909010c29b5420c1..a40fab44b9aed9b3fede68af733db78f061767d2 100644 (file)
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
          Say Y here if you want to build support for the Adaptec Airport 1000
          and 2000 dongles.  If you want to compile it as a module, choose
          M here. Some information is contained in the comments
-         at the top of <file:drivers/net/irda/old_belkin.c>.
+         at the top of <file:drivers/net/irda/old_belkin-sir.c>.
 
 config ACT200L_DONGLE
        tristate "ACTiSYS IR-200L dongle"