ARM: DT: apq8064: Add sdcc support via mcci driver.

This patch adds support to SD card controller using generic pl180 mmci driver.
This patch also adds temporary fixed regulator to get it going till the actual
regulator is mainlined.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7c2441d526bce1c76966603fc4ece981feb6daa8..90db8af51f3a79d31f7039a2503c0e686625c20b 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -12,5 +12,17 @@
                                status = "ok";
                        };
                };
+
+               amba {
+                       /* eMMC */
+                       sdcc1: sdcc@12400000 {
+                               status = "okay";
+                       };
+
+                       /* External micro SD card */
+                       sdcc3: sdcc@12180000 {
+                               status = "okay";
+                       };
+               };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index c8098bc3c27616aa173a7bb904be50365906d445..32075e84872edf68868029899ba80d6834c4b67c 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -196,5 +196,54 @@
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                };
+
+               /* Temporary fixed regulator */
+               vsdcc_fixed: vsdcc-regulator {
+                       compatible = "regulator-fixed";
+                       regulator-name = "SDCC Power";
+                       regulator-min-microvolt = <2700000>;
+                       regulator-max-microvolt = <2700000>;
+                       regulator-always-on;
+               };
+
+               amba {
+                       compatible = "arm,amba-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       sdcc1: sdcc@12400000 {
+                               status          = "disabled";
+                               compatible      = "arm,pl18x", "arm,primecell";
+                               arm,primecell-periphid = <0x00051180>;
+                               reg             = <0x12400000 0x2000>;
+                               interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "cmd_irq";
+                               clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+                               clock-names     = "mclk", "apb_pclk";
+                               bus-width       = <8>;
+                               max-frequency   = <96000000>;
+                               non-removable;
+                               cap-sd-highspeed;
+                               cap-mmc-highspeed;
+                               vmmc-supply = <&vsdcc_fixed>;
+                       };
+
+                       sdcc3: sdcc@12180000 {
+                               compatible      = "arm,pl18x", "arm,primecell";
+                               arm,primecell-periphid = <0x00051180>;
+                               status          = "disabled";
+                               reg             = <0x12180000 0x2000>;
+                               interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "cmd_irq";
+                               clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+                               clock-names     = "mclk", "apb_pclk";
+                               bus-width       = <4>;
+                               cap-sd-highspeed;
+                               cap-mmc-highspeed;
+                               max-frequency   = <192000000>;
+                               no-1-8-v;
+                               vmmc-supply = <&vsdcc_fixed>;
+                       };
+               };
        };
 };