ARM: AM33xx: hwmod: remove am33xx specific module SoC opts

These are now identical with the OMAP4 implementations, so use the OMAP4
versions and remove the AM33xx ones.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index a8f57ef1e1d41c144fad14239ee895db15615724..9fec604ee625285de2a26b9a9184ef21021c593d 100644 (file)
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -984,25 +984,6 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
                              oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
 }
 
-/**
- * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Enables the PRCM module mode related to the hwmod @oh.
- * No return value.
- */
-static void _am33xx_enable_module(struct omap_hwmod *oh)
-{
-       if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-               return;
-
-       pr_debug("omap_hwmod: %s: %s: %d\n",
-                oh->name, __func__, oh->prcm.omap4.modulemode);
-
-       omap_cm_module_enable(oh->prcm.omap4.modulemode, 0, oh->clkdm->cm_inst,
-                             oh->prcm.omap4.clkctrl_offs);
-}
-
 /**
  * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
  * @oh: struct omap_hwmod *
@@ -1028,30 +1009,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
                                        oh->prcm.omap4.clkctrl_offs, 0);
 }
 
-/**
- * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to enter slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully enters
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_idle() function.
- */
-static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
-{
-       if (!oh)
-               return -EINVAL;
-
-       if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-               return 0;
-
-       if (oh->flags & HWMOD_NO_IDLEST)
-               return 0;
-
-       return omap_cm_wait_module_idle(0, oh->clkdm->cm_inst,
-                                       oh->prcm.omap4.clkctrl_offs, 0);
-}
-
 /**
  * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
  * @oh: struct omap_hwmod *oh
@@ -1865,36 +1822,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
        return 0;
 }
 
-/**
- * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _am33xx_disable_module(struct omap_hwmod *oh)
-{
-       int v;
-
-       if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-               return -EINVAL;
-
-       pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
-       if (_are_any_hardreset_lines_asserted(oh))
-               return 0;
-
-       omap_cm_module_disable(0, oh->clkdm->cm_inst,
-                              oh->prcm.omap4.clkctrl_offs);
-
-       v = _am33xx_wait_target_disable(oh);
-       if (v)
-               pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
-                       oh->name);
-
-       return 0;
-}
-
 /**
  * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
  * @oh: struct omap_hwmod *
@@ -2973,32 +2900,6 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
                                         oh->prcm.omap4.clkctrl_offs, 0);
 }
 
-/**
- * _am33xx_wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
-{
-       if (!oh || !oh->clkdm)
-               return -EINVAL;
-
-       if (oh->flags & HWMOD_NO_IDLEST)
-               return 0;
-
-       if (!_find_mpu_rt_port(oh))
-               return 0;
-
-       /* XXX check module SIDLEMODE, hardreset status */
-
-       return omap_cm_wait_module_ready(0, oh->clkdm->cm_inst,
-                                        oh->prcm.omap4.clkctrl_offs, 0);
-}
-
 /**
  * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to assert hardreset
@@ -4227,9 +4128,9 @@ void __init omap_hwmod_init(void)
                soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
                soc_ops.init_clkdm = _init_clkdm;
        } else if (soc_is_am33xx()) {
-               soc_ops.enable_module = _am33xx_enable_module;
-               soc_ops.disable_module = _am33xx_disable_module;
-               soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+               soc_ops.enable_module = _omap4_enable_module;
+               soc_ops.disable_module = _omap4_disable_module;
+               soc_ops.wait_target_ready = _omap4_wait_target_ready;
                soc_ops.assert_hardreset = _am33xx_assert_hardreset;
                soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
                soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;