powerpc/85xx: Add P1024rdb board support

The p1024rdb has the similar feature as the p1020rdb. Therefore, p1024rdb use
the same platform file as the p1/p2 rdb board.
Overview of P2020RDB platform
	- DDR3 1G
	- NOR flash 16M
	- 3 Ethernet interfaces
	- NAND Flash 32M
	- SPI EEPROM 16M
	- SD/MMC
	- 2 USB ports
	- 4 TDM ports

Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 313fce4f55747eb9d0fe8639a145ef7489c2e52e..1910fdcb75b2479558564fd08cb4031f553d34f2 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -169,6 +169,7 @@ machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -237,6 +238,13 @@ static int __init p1020_utm_pc_probe(void)
        return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
 }
 
+static int __init p1024_rdb_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
+}
+
 define_machine(p2020_rdb) {
        .name                   = "P2020 RDB",
        .probe                  = p2020_rdb_probe,
@@ -348,3 +356,17 @@ define_machine(p1020_rdb_pc) {
        .calibrate_decr         = generic_calibrate_decr,
        .progress               = udbg_progress,
 };
+
+define_machine(p1024_rdb) {
+       .name                   = "P1024 RDB",
+       .probe                  = p1024_rdb_probe,
+       .setup_arch             = mpc85xx_rdb_setup_arch,
+       .init_IRQ               = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+       .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
+#endif
+       .get_irq                = mpic_get_irq,
+       .restart                = fsl_rstcr_restart,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+};