--- /dev/null
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Marvell Reference Design 88F5182 NAS";
+ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+ <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_debug_led>;
+ pinctrl-names = "default";
+
+ led@0 {
+ label = "rd88f5182:cpu";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ };
+};
+
+&devbus_cs1 {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <1>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+ &pmx_pci_gpios>;
+ pinctrl-names = "default";
+
+ /*
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ pmx_debug_led: pmx-debug_led {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_reset_switch: pmx-reset-switch {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_misc_gpios: pmx-misc-gpios {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "gpio";
+ };
+
+ pmx_pci_gpios: pmx-pci-gpios {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (of_machine_is_compatible("marvell,rd-88f5182-nas"))
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
projects / deliverable / linux.git / commitdiff
