be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
-- compatible : compatible list, containing "fsl,ssi"
-- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
-- reg : offset and length of the register set for the device
-- interrupts
: <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and
- level information for the interrupt. This should be
- encoded based on the information in section 2)
- depending on the type of interrupt controller you
- have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
-- fsl,mode : the operating mode for the SSI interface
- "i2s-slave" - I2S mode, SSI is clock slave
- "i2s-master" - I2S mode, SSI is clock master
- "lj-slave" - left-justified mode, SSI is clock slave
- "lj-master" - l.j. mode, SSI is clock master
- "rj-slave" - right-justified mode, SSI is clock slave
- "rj-master" - r.j., SSI is clock master
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: phandle to a node for the DMA channel to use for
+- compatible: Compatible list, contains "fsl,ssi".
+- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg: Offset and length of the register set for the device.
+- interrupts
: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and
+ level information for the interrupt. This should be
+ encoded based on the information in section 2)
+ depending on the type of interrupt controller you
+ have.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this device.
+- fsl,mode: The operating mode for the SSI interface.
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - left-justified mode, SSI is clock slave
+ "lj-master" - l.j. mode, SSI is clock master
+ "rj-slave" - right-justified mode, SSI is clock slave
+ "rj-master" - r.j., SSI is clock master
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
playback of audio. This is typically dictated by SOC
design. See the notes below.
-- fsl,capture-dma: phandle to a node for the DMA channel to use for
+- fsl,capture-dma: Phandle to a node for the DMA channel to use for
capture (recording) of audio. This is typically dictated
by SOC design. See the notes below.
-- fsl,fifo-depth: the number of elements in the transmit and receive FIFOs.
+- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+ If specified, the SSI is to be programmed in asynchronous
+ mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
+ all be connected to valid signals. In synchronous mode,
+ SRCK and SRFS are ignored. Asynchronous mode allows
+ playback and capture to use different sample sizes and
+ sample rates. Some drivers may require that SRCK and STCK
+ be connected together, and SRFS and STFS be connected
+ together. This would still allow different sample sizes,
+ but not different sample rates.
Optional properties:
-- codec-handle : phandle to a 'codec' node that defines an audio
- codec connected to this SSI. This node is typically
- a child of an I2C or other control node.
+- codec-handle: Phandle to a 'codec' node that defines an audio
+ codec connected to this SSI. This node is typically
+ a child of an I2C or other control node.
Child 'codec' node required properties:
-- compatible : compatible list, contains the name of the codec
+- compatible: Compatible list, contains the name of the codec
Child 'codec' node optional properties:
-- clock-frequency : The frequency of the input clock, which typically
- comes from an on-board dedicated oscillator.
+- clock-frequency: The frequency of the input clock, which typically comes
+ from an on-board dedicated oscillator.
Notes on fsl,playback-dma and fsl,capture-dma:
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 33 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 34 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
};
enet1: ethernet@26000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
};
enet1: ethernet@26000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
};
enet1: ethernet@26000 {
};
};
- mdio@24520 { /* For TSECs */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- PHY1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- PHY2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
/* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&PHY1>;
+
+ mdio@520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
/* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&PHY2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
#address-cells = <1>;
#size-cells = <1>;
sleep = <&pmc 0x20000000>;
- ranges;
+ ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
- mdio@24520 {
+ mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
+ reg = <0x520 0x20>;
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>;
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
- mdio@25520 {
+ mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
+ reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
phy_type = "utmi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <19 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <19 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- /* Vitesse 8201 */
- phy1c: ethernet-phy@1c {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ /* Vitesse 8201 */
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
linux,network-index = <1>;
tbi-handle = <&tbi1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- /* Vitesse 8201 */
- phy1c: ethernet-phy@1c {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ /* Vitesse 8201 */
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
clock-frequency = <0>;
pcie@0 {
0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
clock-frequency = <0>;
pcie@0 {
gpio-controller;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- dtt@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- at24@50 {
- compatible = "at24,24c256";
- reg = <0x50>;
- };
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8377erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8377erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
clock-frequency = <0>;
pcie@0 {
0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
clock-frequency = <0>;
pcie@0 {
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
+ sleep = <&pmc 0x00010000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
clock-frequency = <0>;
pcie@0 {
0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
clock-frequency = <0>;
pcie@0 {
gpio-controller;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- dtt@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- at24@50 {
- compatible = "at24,24c256";
- reg = <0x50>;
- };
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8378erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8378erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
+ tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
clock-frequency = <0>;
pcie@0 {
0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
clock-frequency = <0>;
pcie@0 {
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
sata@1a000 {
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x0000000c>;
};
sata@1b000 {
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000003>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
gpio-controller;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- dtt@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- at24@50 {
- compatible = "at24,24c256";
- reg = <0x50>;
- };
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8379erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8379erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8379-esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
sata@1a000 {
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x0000000c>;
};
sata@1b000 {
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000003>;
};
/* IPIC
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
usb@2b000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
dfsrr;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
/* eTSEC 3/4 are currently broken
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
*/
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@7 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x7>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@7 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ };
};
enet1: ethernet@25000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&ipic>;
- interrupts = <21 0x8>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&ipic>;
+ interrupts = <21 0x8>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1b {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1b>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@1c {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1b {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x1>;
+ reg = <0x1b>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@1c {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x1>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@1f {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1f>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@1f {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1f>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
--- /dev/null
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "abb,socrates";
+ compatible = "abb,socrates";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; // Filled in by U-Boot
+ };
+
+ soc8544@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x00000000 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
+ bus-frequency = <0>; // Filled in by U-Boot
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>;
+ cache-size = <0x40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ dtt@28 {
+ compatible = "winbond,w83782d";
+ reg = <0x28>;
+ };
+ rtc@32 {
+ compatible = "epson,rx8025";
+ reg = <0x32>;
+ interrupts = <7 1>;
+ interrupt-parent = <&mpic>;
+ };
+ dtt@4c {
+ compatible = "dallas,ds75";
+ reg = <0x4c>;
+ };
+ ts@4a {
+ compatible = "ti,tsc2003";
+ reg = <0x4a>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0 1>;
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0 1>;
+ reg = <1>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ };
+ };
+ };
+
+ enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+
+ localbus {
+ compatible = "fsl,mpc8544-localbus",
+ "fsl,pq3-localbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xe0005000 0x40>;
+
+ ranges = <0 0 0xfc000000 0x04000000
+ 2 0 0xc8000000 0x04000000
+ 3 0 0xc0000000 0x00100000
+ >; /* Overwritten by U-Boot */
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x0 0x000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1e0000>;
+ read-only;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x1e0000 0x20000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x200000 0x200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x400000 0x3b80000>;
+ };
+ partition@3f80000 {
+ label = "env";
+ reg = <0x3f80000 0x40000>;
+ read-only;
+ };
+ partition@3fc0000 {
+ label = "u-boot";
+ reg = <0x3fc0000 0x40000>;
+ read-only;
+ };
+ };
+
+ display@2,0 {
+ compatible = "fujitsu,lime";
+ reg = <2 0x0 0x4000000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1>;
+ };
+
+ fpga_pic: fpga-pic@3,10 {
+ compatible = "abb,socrates-fpga-pic";
+ reg = <3 0x10 0x10>;
+ interrupt-controller;
+ /* IRQs 2, 10, 11, active low, level-sensitive */
+ interrupts = <2 1 10 1 11 1>;
+ interrupt-parent = <&mpic>;
+ #interrupt-cells = <3>;
+ };
+
+ spi@3,60 {
+ compatible = "abb,socrates-spi";
+ reg = <3 0x60 0x10>;
+ interrupts = <8 4 0>; // number, type, routing
+ interrupt-parent = <&fpga_pic>;
+ };
+
+ nand@3,70 {
+ compatible = "abb,socrates-nand";
+ reg = <3 0x70 0x04>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ data@0 {
+ label = "data";
+ reg = <0x0 0x40000000>;
+ };
+ };
+
+ can@3,100 {
+ compatible = "philips,sja1000";
+ reg = <3 0x100 0x80>;
+ interrupts = <2 8 1>; // number, type, routing
+ interrupt-parent = <&fpga_pic>;
+ };
+ };
+
+ pci0: pci@e0008000 {
+ cell-index = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <66666666>;
+
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 */
+ 0x8800 0x0 0x0 1 &mpic 5 1
+ /* IDSEL 0x12 */
+ 0x9000 0x0 0x0 1 &mpic 4 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+ };
+
+};
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 4>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <5 4>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 4>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 4>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- phy5: ethernet-phy@5 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <5>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ phy5: ethernet-phy@5 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <5>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- phy5: ethernet-phy@5 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <5>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ phy5: ethernet-phy@5 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <5>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+# Sat Oct 18 11:06:13 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_SOCRATES=y
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_OLD_DRIVERS is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_SJA1000=y
+CONFIG_CAN_SJA1000_MEM_OF=y
+# CONFIG_CAN_EMS_PCI is not set
+# CONFIG_CAN_IXXAT_PCI is not set
+# CONFIG_CAN_PEAK_PCI is not set
+# CONFIG_CAN_KVASER_PCI is not set
+# CONFIG_CAN_MSCAN is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_SOCRATES=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_TSC2003=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_SOCRATES=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=y
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8025=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config SOCRATES
+ bool "Socrates"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Socrates board.
+
config KSI8560
bool "Emerson KSI8560"
select DEFAULT_UIMAGE
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
+obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
{ .type = "simple-bus", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .name = "cpm", },
{ .name = "localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
+ { .compatible = "gianfar", },
{},
};
{ .name = "soc", },
{ .type = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
{ .name = "cpm", },
{ .name = "localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
--- /dev/null
+/*
+ * Copyright (c) 2008 Emcraft Systems
+ * Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * Based on MPC8560 ADS and arch/ppc tqm85xx ports
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright (c) 2005-2006 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * Kumar Gala <kumar.gala@freescale.com>
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "socrates_fpga_pic.h"
+
+static void __init socrates_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+ np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
+ if (!np) {
+ printk(KERN_ERR "Could not find socrates-fpga-pic node\n");
+ return;
+ }
+ socrates_fpga_pic_init(np);
+ of_node_put(np);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init socrates_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("socrates_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
+ fsl_add_bridge(np, 1);
+#endif
+}
+
+static struct of_device_id __initdata socrates_of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static void __init socrates_init(void)
+{
+ of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init socrates_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "abb,socrates"))
+ return 1;
+
+ return 0;
+}
+
+define_machine(socrates) {
+ .name = "Socrates",
+ .probe = socrates_probe,
+ .setup_arch = socrates_setup_arch,
+ .init = socrates_init,
+ .init_IRQ = socrates_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--- /dev/null
+/*
+ * Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+/*
+ * The FPGA supports 9 interrupt sources, which can be routed to 3
+ * interrupt request lines of the MPIC. The line to be used can be
+ * specified through the third cell of FDT property "interrupts".
+ */
+
+#define SOCRATES_FPGA_NUM_IRQS 9
+
+#define FPGA_PIC_IRQCFG (0x0)
+#define FPGA_PIC_IRQMASK(n) (0x4 + 0x4 * (n))
+
+#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
+
+struct socrates_fpga_irq_info {
+ unsigned int irq_line;
+ int type;
+};
+
+/*
+ * Interrupt routing and type table
+ *
+ * IRQ_TYPE_NONE means the interrupt type is configurable,
+ * otherwise it's fixed to the specified value.
+ */
+static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
+ [0] = {0, IRQ_TYPE_NONE},
+ [1] = {0, IRQ_TYPE_LEVEL_HIGH},
+ [2] = {0, IRQ_TYPE_LEVEL_LOW},
+ [3] = {0, IRQ_TYPE_NONE},
+ [4] = {0, IRQ_TYPE_NONE},
+ [5] = {0, IRQ_TYPE_NONE},
+ [6] = {0, IRQ_TYPE_NONE},
+ [7] = {0, IRQ_TYPE_NONE},
+ [8] = {0, IRQ_TYPE_LEVEL_HIGH},
+};
+
+#define socrates_fpga_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+
+static void __iomem *socrates_fpga_pic_iobase;
+static struct irq_host *socrates_fpga_pic_irq_host;
+static unsigned int socrates_fpga_irqs[3];
+
+static inline uint32_t socrates_fpga_pic_read(int reg)
+{
+ return in_be32(socrates_fpga_pic_iobase + reg);
+}
+
+static inline void socrates_fpga_pic_write(int reg, uint32_t val)
+{
+ out_be32(socrates_fpga_pic_iobase + reg, val);
+}
+
+static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
+{
+ uint32_t cause;
+ unsigned long flags;
+ int i;
+
+ /* Check irq line routed to the MPIC */
+ for (i = 0; i < 3; i++) {
+ if (irq == socrates_fpga_irqs[i])
+ break;
+ }
+ if (i == 3)
+ return NO_IRQ;
+
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+ for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
+ if (cause >> (i + 16))
+ break;
+ }
+ return irq_linear_revmap(socrates_fpga_pic_irq_host,
+ (irq_hw_number_t)i);
+}
+
+void socrates_fpga_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq;
+
+ /*
+ * See if we actually have an interrupt, call generic handling code if
+ * we do.
+ */
+ cascade_irq = socrates_fpga_pic_get_irq(irq);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ desc->chip->eoi(irq);
+
+}
+
+static void socrates_fpga_pic_ack(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq, irq_line;
+ uint32_t mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask &= ~(1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask_ack(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask &= ~(1 << hwirq);
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_unmask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_eoi(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static int socrates_fpga_pic_set_type(unsigned int virq,
+ unsigned int flow_type)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int polarity;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
+ return -EINVAL;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ polarity = 1;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ polarity = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
+ if (polarity)
+ mask |= (1 << hwirq);
+ else
+ mask &= ~(1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+ return 0;
+}
+
+static struct irq_chip socrates_fpga_pic_chip = {
+ .typename = " FPGA-PIC ",
+ .ack = socrates_fpga_pic_ack,
+ .mask = socrates_fpga_pic_mask,
+ .mask_ack = socrates_fpga_pic_mask_ack,
+ .unmask = socrates_fpga_pic_unmask,
+ .eoi = socrates_fpga_pic_eoi,
+ .set_type = socrates_fpga_pic_set_type,
+};
+
+static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ /* All interrupts are LEVEL sensitive */
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
+ handle_fasteoi_irq);
+
+ return 0;
+}
+
+static int socrates_fpga_pic_host_xlate(struct irq_host *h,
+ struct device_node *ct, u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
+
+ *out_hwirq = intspec[0];
+ if (fpga_irq->type == IRQ_TYPE_NONE) {
+ /* type is configurable */
+ if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
+ intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
+ pr_warning("FPGA PIC: invalid irq type, "
+ "setting default active low\n");
+ *out_flags = IRQ_TYPE_LEVEL_LOW;
+ } else {
+ *out_flags = intspec[1];
+ }
+ } else {
+ /* type is fixed */
+ *out_flags = fpga_irq->type;
+ }
+
+ /* Use specified interrupt routing */
+ if (intspec[2] <= 2)
+ fpga_irq->irq_line = intspec[2];
+ else
+ pr_warning("FPGA PIC: invalid irq routing\n");
+
+ return 0;
+}
+
+static struct irq_host_ops socrates_fpga_pic_host_ops = {
+ .map = socrates_fpga_pic_host_map,
+ .xlate = socrates_fpga_pic_host_xlate,
+};
+
+void socrates_fpga_pic_init(struct device_node *pic)
+{
+ unsigned long flags;
+ int i;
+
+ /* Setup an irq_host structure */
+ socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR,
+ SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops,
+ SOCRATES_FPGA_NUM_IRQS);
+ if (socrates_fpga_pic_irq_host == NULL) {
+ pr_err("FPGA PIC: Unable to allocate host\n");
+ return;
+ }
+
+ for (i = 0; i < 3; i++) {
+ socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
+ if (socrates_fpga_irqs[i] == NO_IRQ) {
+ pr_warning("FPGA PIC: can't get irq%d.\n", i);
+ continue;
+ }
+ set_irq_chained_handler(socrates_fpga_irqs[i],
+ socrates_fpga_pic_cascade);
+ }
+
+ socrates_fpga_pic_iobase = of_iomap(pic, 0);
+
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+
+ pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
+}
--- /dev/null
+/*
+ * Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef SOCRATES_FPGA_PIC_H
+#define SOCRATES_FPGA_PIC_H
+
+void socrates_fpga_pic_init(struct device_node *pic);
+
+#endif
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{}
};
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "fsl,rapidio-delta", },
+ { .compatible = "gianfar", },
{},
};
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
projects / deliverable / linux.git / commitdiff
