staging: rtl8187se: Removed unused parameters of HwHSSIThreeWire()

Removed two parameters of HwHSSIThreeWire() that are equal in all
function calls, fixed return type, fixed register width and simplified
code

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h
index 494ea8619e72c87fba1e80d25deefb6d04d67e73..c6f2128e755cb2cf381abea6037a4c150b3adc48 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_rtl8225.h
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.h
@@ -23,8 +23,8 @@ void rtl8225z2_rf_init(struct net_device *dev);
 void rtl8225z2_rf_set_chan(struct net_device *dev, short ch);
 void rtl8225z2_rf_close(struct net_device *dev);
 
-void RF_WriteReg(struct net_device *dev, u8 offset, u32        data);
-u32 RF_ReadReg(struct net_device *dev, u8 offset);
+void RF_WriteReg(struct net_device *dev, u8 offset, u16 data);
+u16 RF_ReadReg(struct net_device *dev, u8 offset);
 
 void rtl8180_set_mode(struct net_device *dev, int mode);
 void rtl8180_set_mode(struct net_device *dev, int mode);

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index cf9bcd588c1dd90e0029701340d8f8dc7092ce10..06a1c0b31dc66ddd86d538ecf0cf10d1ce56a39b 100644 (file)
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -207,13 +207,10 @@ void SetOutputEnableOfRfPins(struct net_device *dev)
        write_nic_word(dev, RFPinsEnable, 0x1bff);
 }
 
-static int HwHSSIThreeWire(struct net_device *dev,
-                          u8 *pDataBuf,
-                          u8 nDataBufBitCnt,
-                          int bSI,
-                          int bWrite)
+static bool HwHSSIThreeWire(struct net_device *dev,
+                           u8 *pDataBuf,
+                           bool write)
 {
-       int     bResult = 1;
        u8      TryCnt;
        u8      u1bTmp;
 
@@ -228,77 +225,29 @@ static int HwHSSIThreeWire(struct net_device *dev,
        if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
                printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
                       " %#X RE|WE bits are not clear!!\n", u1bTmp);
-               dump_stack();
-               return 0;
+               return false;
        }
 
        /* RTL8187S HSSI Read/Write Function */
        u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
-
-       if (bSI)
-               u1bTmp |=   RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
-
-       else
-               u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
-
-
+       u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
        write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
 
-       if (bSI) {
-               /* jong: HW SI read must set reg84[3]=0. */
-               u1bTmp = read_nic_byte(dev, RFPinsSelect);
-               u1bTmp &= ~BIT3;
-               write_nic_byte(dev, RFPinsSelect, u1bTmp);
-       }
+       /* jong: HW SI read must set reg84[3]=0. */
+       u1bTmp = read_nic_byte(dev, RFPinsSelect);
+       u1bTmp &= ~BIT3;
+       write_nic_byte(dev, RFPinsSelect, u1bTmp);
        /*  Fill up data buffer for write operation. */
 
-       if (bWrite) {
-               if (nDataBufBitCnt == 16) {
-                       write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-               } else if (nDataBufBitCnt == 64) {
-               /* RTL8187S shouldn't enter this case */
-                       write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
-                       write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
-               } else {
-                       int idx;
-                       int ByteCnt = nDataBufBitCnt / 8;
-                                                       /* printk("%d\n",nDataBufBitCnt); */
-                       if ((nDataBufBitCnt % 8) != 0) {
-                               printk(KERN_ERR "rtl8187se: "
-                                      "HwThreeWire(): nDataBufBitCnt(%d)"
-                                      " should be multiple of 8!!!\n",
-                                      nDataBufBitCnt);
-                               dump_stack();
-                               nDataBufBitCnt += 8;
-                               nDataBufBitCnt &= ~7;
-                       }
-
-                      if (nDataBufBitCnt > 64) {
-                               printk(KERN_ERR "rtl8187se: HwThreeWire():"
-                                      " nDataBufBitCnt(%d) should <= 64!!!\n",
-                                      nDataBufBitCnt);
-                               dump_stack();
-                               nDataBufBitCnt = 64;
-                       }
-
-                       for (idx = 0; idx < ByteCnt; idx++)
-                               write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
-
-               }
-       } else {        /* read */
-               if (bSI) {
-                       /* SI - reg274[3:0] : RF register's Address */
-                       write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-               } else {
-                       /*  PI - reg274[15:12] : RF register's Address */
-                       write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
-               }
-       }
+       /* SI - reg274[3:0] : RF register's Address */
+       if (write)
+               write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
+       else
+               write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
 
        /* Set up command: WE or RE. */
-       if (bWrite)
+       if (write)
                write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
-
        else
                write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
 
@@ -306,7 +255,7 @@ static int HwHSSIThreeWire(struct net_device *dev,
        /* Check if DONE is set. */
        for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
                u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
-               if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
+               if (u1bTmp & SW_3W_CMD1_DONE)
                        break;
 
                udelay(10);
@@ -315,45 +264,26 @@ static int HwHSSIThreeWire(struct net_device *dev,
        write_nic_byte(dev, SW_3W_CMD1, 0);
 
        /* Read back data for read operation. */
-       if (bWrite == 0) {
-               if (bSI) {
-                       /* Serial Interface : reg363_362[11:0] */
-                       *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
-               } else {
-                       /* Parallel Interface : reg361_360[11:0] */
-                       *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
-               }
-
+       if (!write) {
+               /* Serial Interface : reg363_362[11:0] */
+               *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ);
                *((u16 *)pDataBuf) &= 0x0FFF;
        }
 
-       return bResult;
+       return true;
 }
 
-void RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
+void RF_WriteReg(struct net_device *dev, u8 offset, u16 data)
 {
-       u32 data2Write;
-       u8 len;
-
-       /* Pure HW 3-wire. */
-       data2Write = (data << 4) | (u32)(offset & 0x0f);
-       len = 16;
-
-       HwHSSIThreeWire(dev, (u8 *)(&data2Write), len, 1, 1);
+       u16 reg = (data << 4) | (offset & 0x0f);
+       HwHSSIThreeWire(dev, (u8 *)&reg, true);
 }
 
-u32 RF_ReadReg(struct net_device *dev, u8 offset)
+u16 RF_ReadReg(struct net_device *dev, u8 offset)
 {
-       u32 data2Write;
-       u8 wlen;
-       u32 dataRead;
-
-       data2Write = ((u32)(offset & 0x0f));
-       wlen = 16;
-       HwHSSIThreeWire(dev, (u8 *)(&data2Write), wlen, 1, 0);
-       dataRead = data2Write;
-
-       return dataRead;
+       u16 reg = offset & 0x0f;
+       HwHSSIThreeWire(dev, (u8 *)&reg, false);
+       return reg;
 }
 
 
@@ -469,7 +399,8 @@ void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
        struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
        u32                     i;
        u32     addr, data;
-       u32     u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24;
+       u32 u4bRegOffset, u4bRegValue;
+       u16 u4bRF23, u4bRF24;
        u8                      u1b24E;
        int d_cut = 0;