spi: bcm53xx: driver for SPI controller on Broadcom bcma SoC
authorRafał Miłecki <zajec5@gmail.com>
Sun, 17 Aug 2014 16:33:38 +0000 (18:33 +0200)
committerMark Brown <broonie@linaro.org>
Tue, 19 Aug 2014 16:30:55 +0000 (11:30 -0500)
Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA
devices). If board has a serial flash, it's connected over SPI and the
bcma bus includes a SPI controller. Example log from such a board:
bus0: Found chip with id 53010, rev 0x00 and package 0x02
(...)
bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)

This patch adds a bcma driver for SPI core, it registers SPI master
controller and "bcm53xxspiflash" SPI device.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/spi-bcm53xx.c [new file with mode: 0644]
drivers/spi/spi-bcm53xx.h [new file with mode: 0644]

index 62e2242ad7e026bc1d08b78b9b125a70e08386e6..b14b829fb45c5a5d68ec3e2d689ac844cf2ae3ce 100644 (file)
@@ -112,6 +112,12 @@ config SPI_AU1550
          If you say yes to this option, support will be included for the
          PSC SPI controller found on Au1550, Au1200 and Au1300 series.
 
+config SPI_BCM53XX
+       tristate "Broadcom BCM53xx SPI controller"
+       depends on ARCH_BCM_5301X
+       help
+          Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
+
 config SPI_BCM63XX
        tristate "Broadcom BCM63xx SPI controller"
        depends on BCM63XX
index 762da0741148fe789bddeb556815f2e2caaba006..78f24ca36fcf017e6159c394df64fdf2af142d34 100644 (file)
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)                       += spi-atmel.o
 obj-$(CONFIG_SPI_ATH79)                        += spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)               += spi-au1550.o
 obj-$(CONFIG_SPI_BCM2835)              += spi-bcm2835.o
+obj-$(CONFIG_SPI_BCM53XX)              += spi-bcm53xx.o
 obj-$(CONFIG_SPI_BCM63XX)              += spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)                += spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BFIN5XX)              += spi-bfin5xx.o
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
new file mode 100644 (file)
index 0000000..48f13df
--- /dev/null
@@ -0,0 +1,295 @@
+#define pr_fmt(fmt)            KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bcma/bcma.h>
+#include <linux/spi/spi.h>
+
+#include "spi-bcm53xx.h"
+
+#define BCM53XXSPI_MAX_SPI_BAUD        13500000        /* 216 MHz? */
+
+/* The longest observed required wait was 19 ms */
+#define BCM53XXSPI_SPE_TIMEOUT_MS      80
+
+struct bcm53xxspi {
+       struct bcma_device *core;
+       struct spi_master *master;
+
+       size_t read_offset;
+};
+
+static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
+{
+       return bcma_read32(b53spi->core, offset);
+}
+
+static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
+                                   u32 value)
+{
+       bcma_write32(b53spi->core, offset, value);
+}
+
+static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
+{
+       /* Do some magic calculation based on length and buad. Add 10% and 1. */
+       return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
+}
+
+static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
+{
+       unsigned long deadline;
+       u32 tmp;
+
+       /* SPE bit has to be 0 before we read MSPI STATUS */
+       deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
+       do {
+               tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
+               if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
+                       break;
+               udelay(5);
+       } while (!time_after_eq(jiffies, deadline));
+
+       if (tmp & B53SPI_MSPI_SPCR2_SPE)
+               goto spi_timeout;
+
+       /* Check status */
+       deadline = jiffies + timeout_ms * HZ / 1000;
+       do {
+               tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
+               if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
+                       bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
+                       return 0;
+               }
+
+               cpu_relax();
+               udelay(100);
+       } while (!time_after_eq(jiffies, deadline));
+
+spi_timeout:
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
+
+       pr_err("Timeout waiting for SPI to be ready!\n");
+
+       return -EBUSY;
+}
+
+static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
+                                size_t len, bool cont)
+{
+       u32 tmp;
+       int i;
+
+       for (i = 0; i < len; i++) {
+               /* Transmit Register File MSB */
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
+                                (unsigned int)w_buf[i]);
+       }
+
+       for (i = 0; i < len; i++) {
+               tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
+                     B53SPI_CDRAM_PCS_DSCK;
+               if (!cont && i == len - 1)
+                       tmp &= ~B53SPI_CDRAM_CONT;
+               tmp &= ~0x1;
+               /* Command Register File */
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
+       }
+
+       /* Set queue pointers */
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
+
+       if (cont)
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
+
+       /* Start SPI transfer */
+       tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
+       tmp |= B53SPI_MSPI_SPCR2_SPE;
+       if (cont)
+               tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
+
+       /* Wait for SPI to finish */
+       bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
+
+       if (!cont)
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+
+       b53spi->read_offset = len;
+}
+
+static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
+                               size_t len, bool cont)
+{
+       u32 tmp;
+       int i;
+
+       for (i = 0; i < b53spi->read_offset + len; i++) {
+               tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
+                     B53SPI_CDRAM_PCS_DSCK;
+               if (!cont && i == b53spi->read_offset + len - 1)
+                       tmp &= ~B53SPI_CDRAM_CONT;
+               tmp &= ~0x1;
+               /* Command Register File */
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
+       }
+
+       /* Set queue pointers */
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
+                        b53spi->read_offset + len - 1);
+
+       if (cont)
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
+
+       /* Start SPI transfer */
+       tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
+       tmp |= B53SPI_MSPI_SPCR2_SPE;
+       if (cont)
+               tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
+       bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
+
+       /* Wait for SPI to finish */
+       bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
+
+       if (!cont)
+               bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+
+       for (i = 0; i < len; ++i) {
+               int offset = b53spi->read_offset + i;
+
+               /* Data stored in the transmit register file LSB */
+               r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
+       }
+
+       b53spi->read_offset = 0;
+}
+
+static int bcm53xxspi_transfer_one(struct spi_master *master,
+                                  struct spi_device *spi,
+                                  struct spi_transfer *t)
+{
+       struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
+       u8 *buf;
+       size_t left;
+
+       if (t->tx_buf) {
+               buf = (u8 *)t->tx_buf;
+               left = t->len;
+               while (left) {
+                       size_t to_write = min_t(size_t, 16, left);
+                       bool cont = left - to_write > 0;
+
+                       bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
+                       left -= to_write;
+                       buf += to_write;
+               }
+       }
+
+       if (t->rx_buf) {
+               buf = (u8 *)t->rx_buf;
+               left = t->len;
+               while (left) {
+                       size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
+                                              left);
+                       bool cont = left - to_read > 0;
+
+                       bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
+                       left -= to_read;
+                       buf += to_read;
+               }
+       }
+
+       return 0;
+}
+
+/**************************************************
+ * BCMA
+ **************************************************/
+
+struct spi_board_info bcm53xx_info = {
+       .modalias       = "bcm53xxspiflash",
+};
+
+static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
+       BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
+       BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
+
+static int bcm53xxspi_bcma_probe(struct bcma_device *core)
+{
+       struct bcm53xxspi *b53spi;
+       struct spi_master *master;
+       int err;
+
+       if (core->bus->drv_cc.core->id.rev != 42) {
+               pr_err("SPI on SoC with unsupported ChipCommon rev\n");
+               return -ENOTSUPP;
+       }
+
+       master = spi_alloc_master(&core->dev, sizeof(*b53spi));
+       if (!master)
+               return -ENOMEM;
+
+       b53spi = spi_master_get_devdata(master);
+       b53spi->master = master;
+       b53spi->core = core;
+
+       master->transfer_one = bcm53xxspi_transfer_one;
+
+       bcma_set_drvdata(core, b53spi);
+
+       err = devm_spi_register_master(&core->dev, master);
+       if (err) {
+               spi_master_put(master);
+               bcma_set_drvdata(core, NULL);
+               goto out;
+       }
+
+       /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
+       spi_new_device(master, &bcm53xx_info);
+
+out:
+       return err;
+}
+
+static void bcm53xxspi_bcma_remove(struct bcma_device *core)
+{
+       struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
+
+       spi_unregister_master(b53spi->master);
+}
+
+static struct bcma_driver bcm53xxspi_bcma_driver = {
+       .name           = KBUILD_MODNAME,
+       .id_table       = bcm53xxspi_bcma_tbl,
+       .probe          = bcm53xxspi_bcma_probe,
+       .remove         = bcm53xxspi_bcma_remove,
+};
+
+/**************************************************
+ * Init & exit
+ **************************************************/
+
+static int __init bcm53xxspi_module_init(void)
+{
+       int err = 0;
+
+       err = bcma_driver_register(&bcm53xxspi_bcma_driver);
+       if (err)
+               pr_err("Failed to register bcma driver: %d\n", err);
+
+       return err;
+}
+
+static void __exit bcm53xxspi_module_exit(void)
+{
+       bcma_driver_unregister(&bcm53xxspi_bcma_driver);
+}
+
+module_init(bcm53xxspi_module_init);
+module_exit(bcm53xxspi_module_exit);
diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h
new file mode 100644 (file)
index 0000000..73575df
--- /dev/null
@@ -0,0 +1,72 @@
+#ifndef SPI_BCM53XX_H
+#define SPI_BCM53XX_H
+
+#define B53SPI_BSPI_REVISION_ID                        0x000
+#define B53SPI_BSPI_SCRATCH                    0x004
+#define B53SPI_BSPI_MAST_N_BOOT_CTRL           0x008
+#define B53SPI_BSPI_BUSY_STATUS                        0x00c
+#define B53SPI_BSPI_INTR_STATUS                        0x010
+#define B53SPI_BSPI_B0_STATUS                  0x014
+#define B53SPI_BSPI_B0_CTRL                    0x018
+#define B53SPI_BSPI_B1_STATUS                  0x01c
+#define B53SPI_BSPI_B1_CTRL                    0x020
+#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL                0x024
+#define B53SPI_BSPI_FLEX_MODE_ENABLE           0x028
+#define B53SPI_BSPI_BITS_PER_CYCLE             0x02c
+#define B53SPI_BSPI_BITS_PER_PHASE             0x030
+#define B53SPI_BSPI_CMD_AND_MODE_BYTE          0x034
+#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
+#define B53SPI_BSPI_BSPI_XOR_VALUE             0x03c
+#define B53SPI_BSPI_BSPI_XOR_ENABLE            0x040
+#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE       0x044
+#define B53SPI_BSPI_BSPI_PIO_IODIR             0x048
+#define B53SPI_BSPI_BSPI_PIO_DATA              0x04c
+
+/* RAF */
+#define B53SPI_RAF_START_ADDR                  0x100
+#define B53SPI_RAF_NUM_WORDS                   0x104
+#define B53SPI_RAF_CTRL                                0x108
+#define B53SPI_RAF_FULLNESS                    0x10c
+#define B53SPI_RAF_WATERMARK                   0x110
+#define B53SPI_RAF_STATUS                      0x114
+#define B53SPI_RAF_READ_DATA                   0x118
+#define B53SPI_RAF_WORD_CNT                    0x11c
+#define B53SPI_RAF_CURR_ADDR                   0x120
+
+/* MSPI */
+#define B53SPI_MSPI_SPCR0_LSB                  0x200
+#define B53SPI_MSPI_SPCR0_MSB                  0x204
+#define B53SPI_MSPI_SPCR1_LSB                  0x208
+#define B53SPI_MSPI_SPCR1_MSB                  0x20c
+#define B53SPI_MSPI_NEWQP                      0x210
+#define B53SPI_MSPI_ENDQP                      0x214
+#define B53SPI_MSPI_SPCR2                      0x218
+#define  B53SPI_MSPI_SPCR2_SPE                 0x00000040
+#define  B53SPI_MSPI_SPCR2_CONT_AFTER_CMD      0x00000080
+#define B53SPI_MSPI_MSPI_STATUS                        0x220
+#define  B53SPI_MSPI_MSPI_STATUS_SPIF          0x00000001
+#define B53SPI_MSPI_CPTQP                      0x224
+#define B53SPI_MSPI_TXRAM                      0x240 /* 32 registers, up to 0x2b8 */
+#define B53SPI_MSPI_RXRAM                      0x2c0 /* 32 registers, up to 0x33c */
+#define B53SPI_MSPI_CDRAM                      0x340 /* 16 registers, up to 0x37c */
+#define  B53SPI_CDRAM_PCS_PCS0                 0x00000001
+#define  B53SPI_CDRAM_PCS_PCS1                 0x00000002
+#define  B53SPI_CDRAM_PCS_PCS2                 0x00000004
+#define  B53SPI_CDRAM_PCS_PCS3                 0x00000008
+#define  B53SPI_CDRAM_PCS_DISABLE_ALL          0x0000000f
+#define  B53SPI_CDRAM_PCS_DSCK                 0x00000010
+#define  B53SPI_CDRAM_BITSE                    0x00000040
+#define  B53SPI_CDRAM_CONT                     0x00000080
+#define B53SPI_MSPI_WRITE_LOCK                 0x380
+#define B53SPI_MSPI_DISABLE_FLUSH_GEN          0x384
+
+/* Interrupt */
+#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED    0x3a0
+#define B53SPI_INTR_RAF_LR_TRUNCATED           0x3a4
+#define B53SPI_INTR_RAF_LR_IMPATIENT           0x3a8
+#define B53SPI_INTR_RAF_LR_SESSION_DONE                0x3ac
+#define B53SPI_INTR_RAF_LR_OVERREAD            0x3b0
+#define B53SPI_INTR_MSPI_DONE                  0x3b4
+#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE     0x3b8
+
+#endif /* SPI_BCM53XX_H */
This page took 0.030401 seconds and 5 git commands to generate.