thermal: ti-soc-thermal: Set the bandgap mask counter delay value

Set the bandgap mask counter_delay with the polling_delay value on
registering the thermal zone. This patch will ensure to get the
correct update interval for computing the thermal trend.

Signed-off-by: Ranganath Krishnan <ranganath@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 4c5f55c373496e30fde2cbff0d18893268fe58d7..4f8b9af54a5a75d1de884a342920ccb50f9ba869 100644 (file)
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -174,6 +174,9 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
                               enum thermal_device_mode mode)
 {
        struct ti_thermal_data *data = thermal->devdata;
+       struct ti_bandgap *bgp;
+
+       bgp = data->bgp;
 
        if (!data->ti_thermal) {
                dev_notice(&thermal->device, "thermal zone not registered\n");
@@ -190,6 +193,8 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
        mutex_unlock(&data->ti_thermal->lock);
 
        data->mode = mode;
+       ti_bandgap_write_update_interval(bgp, data->sensor_id,
+                                       data->ti_thermal->polling_delay);
        thermal_zone_device_update(data->ti_thermal);
        dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
                data->ti_thermal->polling_delay);
@@ -313,6 +318,8 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
        }
        data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
        ti_bandgap_set_sensor_data(bgp, id, data);
+       ti_bandgap_write_update_interval(bgp, data->sensor_id,
+                                       data->ti_thermal->polling_delay);
 
        return 0;
 }