ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts

This patch adds necessary NAND flash timings to the board specific dts file of
the PHY3250 reference board of the LPC32xx SoC.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>

diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index c4ff6d1a018bbee575fd99432c518d0ed530e769..d7e985e47831ad2c9ca36edda53a59a6780bb199 100644 (file)
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -54,6 +54,17 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
 
+                       nxp,wdr-clks = <14>;
+                       nxp,wwidth = <40000000>;
+                       nxp,whold = <100000000>;
+                       nxp,wsetup = <100000000>;
+                       nxp,rdr-clks = <14>;
+                       nxp,rwidth = <40000000>;
+                       nxp,rhold = <66666666>;
+                       nxp,rsetup = <100000000>;
+                       nand-on-flash-bbt;
+                       gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
                        mtd0@00000000 {
                                label = "phy3250-boot";
                                reg = <0x00000000 0x00064000>;