ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.

This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers
on the stih416 SoC.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index ff2ad35a5aa27984522c5f55abc3ad0737688888..2bdda522c4f07614b1e47c9d04afa500fd0c27c7 100644 (file)
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -324,5 +324,126 @@
                        clocks = <&clk_sysin>;
                        clock-names = "osc_phy";
                };
+
+               ehci0: usb@fe1ffe00 {
+                       compatible = "st,st-ehci-300x";
+                       reg = <0xfe1ffe00 0x100>;
+                       interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb0>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB0_POWERDOWN>,
+                                <&softreset STIH416_USB0_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ohci0: usb@fe1ffc00 {
+                       compatible = "st,st-ohci-300x";
+                       reg = <0xfe1ffc00 0x100>;
+                       interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       status = "okay";
+                       resets = <&powerdown STIH416_USB0_POWERDOWN>,
+                                <&softreset STIH416_USB0_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ehci1: usb@fe203e00 {
+                       compatible = "st,st-ehci-300x";
+                       reg = <0xfe203e00 0x100>;
+                       interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb1>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB1_POWERDOWN>,
+                                <&softreset STIH416_USB1_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ohci1: usb@fe203c00 {
+                       compatible = "st,st-ohci-300x";
+                       reg = <0xfe203c00 0x100>;
+                       interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB1_POWERDOWN>,
+                                <&softreset STIH416_USB1_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ehci2: usb@fe303e00 {
+                       compatible = "st,st-ehci-300x";
+                       reg = <0xfe303e00 0x100>;
+                       interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb2>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB2_POWERDOWN>,
+                                <&softreset STIH416_USB2_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ohci2: usb@fe303c00 {
+                       compatible = "st,st-ohci-300x";
+                       reg = <0xfe303c00 0x100>;
+                       interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB2_POWERDOWN>,
+                                <&softreset STIH416_USB2_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ehci3: usb@fe343e00 {
+                       compatible = "st,st-ehci-300x";
+                       reg = <0xfe343e00 0x100>;
+                       interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb3>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB3_POWERDOWN>,
+                                <&softreset STIH416_USB3_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
+
+               ohci3: usb@fe343c00 {
+                       compatible = "st,st-ohci-300x";
+                       reg = <0xfe343c00 0x100>;
+                       interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+                       clocks = <&clk_s_a1_ls 0>,
+                                <&clockgen_b0 0>;
+                       clock-names = "ic", "clk48";
+                       phys = <&usb2_phy>;
+                       phy-names = "usb";
+                       resets = <&powerdown STIH416_USB3_POWERDOWN>,
+                                <&softreset STIH416_USB3_SOFTRESET>;
+                       reset-names = "power", "softreset";
+               };
        };
 };