This value will be used except for system-specific gadget
drivers that have more specific information.
-config USB_GADGET_SELECTED
- boolean
-
#
# USB Peripheral Controller Support
#
# Integrated controllers
#
-config USB_GADGET_AT91
- boolean "Atmel AT91 USB Device Port"
+config USB_AT91
+ tristate "Atmel AT91 USB Device Port"
depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
- select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
dynamically linked module called "at91_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_AT91
- tristate
- depends on USB_GADGET_AT91
- default USB_GADGET
-
-config USB_GADGET_ATMEL_USBA
- boolean "Atmel USBA"
+config USB_ATMEL_USBA
+ tristate "Atmel USBA"
select USB_GADGET_DUALSPEED
depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
-config USB_ATMEL_USBA
- tristate
- depends on USB_GADGET_ATMEL_USBA
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_FSL_USB2
- boolean "Freescale Highspeed USB DR Peripheral Controller"
+config USB_FSL_USB2
+ tristate "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
select USB_FSL_MPH_DR_OF if OF
dynamically linked module called "fsl_usb2_udc" and force
all gadget drivers to also be dynamically linked.
-config USB_FSL_USB2
- tristate
- depends on USB_GADGET_FSL_USB2
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_FUSB300
- boolean "Faraday FUSB300 USB Peripheral Controller"
+config USB_FUSB300
+ tristate "Faraday FUSB300 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
help
Faraday usb device controller FUSB300 driver
-config USB_FUSB300
- tristate
- depends on USB_GADGET_FUSB300
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_OMAP
- boolean "OMAP USB Device Controller"
+config USB_OMAP
+ tristate "OMAP USB Device Controller"
depends on ARCH_OMAP
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
select USB_OTG_UTILS if ARCH_OMAP
dynamically linked module called "omap_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_OMAP
- tristate
- depends on USB_GADGET_OMAP
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_PXA25X
- boolean "PXA 25x or IXP 4xx"
+config USB_PXA25X
+ tristate "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
select USB_OTG_UTILS
help
dynamically linked module called "pxa25x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_PXA25X
- tristate
- depends on USB_GADGET_PXA25X
- default USB_GADGET
- select USB_GADGET_SELECTED
-
# if there's only one gadget driver, using only two bulk endpoints,
# don't waste memory for the other endpoints
config USB_PXA25X_SMALL
- depends on USB_GADGET_PXA25X
+ depends on USB_PXA25X
bool
default n if USB_ETH_RNDIS
default y if USB_ZERO
default y if USB_ETH
default y if USB_G_SERIAL
-config USB_GADGET_R8A66597
- boolean "Renesas R8A66597 USB Peripheral Controller"
+config USB_R8A66597
+ tristate "Renesas R8A66597 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
help
R8A66597 is a discrete USB host and peripheral controller chip that
dynamically linked module called "r8a66597_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_R8A66597
- tristate
- depends on USB_GADGET_R8A66597
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_RENESAS_USBHS
- boolean "Renesas USBHS"
- depends on USB_RENESAS_USBHS
- select USB_GADGET_DUALSPEED
+config USB_RENESAS_USBHS
+ tristate 'Renesas USBHS controller'
+ depends on SUPERH || ARCH_SHMOBILE
help
- Renesas USBHS is a discrete USB host and peripheral controller
- chip that supports both full and high speed USB 2.0 data transfers.
- platform is able to configure endpoint (pipe) style
-
- Say "y" to enable the gadget specific portion of the USBHS driver.
-
+ Renesas USBHS is a discrete USB host and peripheral controller chip
+ that supports both full and high speed USB 2.0 data transfers.
+ It has nine or more configurable endpoints, and endpoint zero.
-config USB_RENESAS_USBHS_UDC
- tristate
- depends on USB_GADGET_RENESAS_USBHS
- default USB_GADGET
- select USB_GADGET_SELECTED
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "renesas_usbhs" and force all
+ gadget drivers to also be dynamically linked.
-config USB_GADGET_PXA27X
- boolean "PXA 27x"
+config USB_PXA27X
+ tristate "PXA 27x"
depends on ARCH_PXA && (PXA27x || PXA3xx)
select USB_OTG_UTILS
help
dynamically linked module called "pxa27x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_PXA27X
- tristate
- depends on USB_GADGET_PXA27X
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_S3C_HSOTG
- boolean "S3C HS/OtG USB Device controller"
+config USB_S3C_HSOTG
+ tristate "S3C HS/OtG USB Device controller"
depends on S3C_DEV_USB_HSOTG
select USB_GADGET_S3C_HSOTG_PIO
select USB_GADGET_DUALSPEED
The Samsung S3C64XX USB2.0 high-speed gadget controller
integrated into the S3C64XX series SoC.
-config USB_S3C_HSOTG
- tristate
- depends on USB_GADGET_S3C_HSOTG
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_IMX
- boolean "Freescale IMX USB Peripheral Controller"
+config USB_IMX
+ tristate "Freescale IMX USB Peripheral Controller"
depends on ARCH_MX1
help
Freescale's IMX series include an integrated full speed
dynamically linked module called "imx_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_IMX
- tristate
- depends on USB_GADGET_IMX
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_S3C2410
- boolean "S3C2410 USB Device Controller"
+config USB_S3C2410
+ tristate "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
help
Samsung's S3C2410 is an ARM-4 processor with an integrated
This driver has been tested on the S3C2410, S3C2412, and
S3C2440 processors.
-config USB_S3C2410
- tristate
- depends on USB_GADGET_S3C2410
- default USB_GADGET
- select USB_GADGET_SELECTED
-
config USB_S3C2410_DEBUG
boolean "S3C2410 udc debug messages"
- depends on USB_GADGET_S3C2410
+ depends on USB_S3C2410
-config USB_GADGET_S3C_HSUDC
- boolean "S3C2416, S3C2443 and S3C2450 USB Device Controller"
+config USB_S3C_HSUDC
+ tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
depends on ARCH_S3C2410
select USB_GADGET_DUALSPEED
help
This driver has been tested on S3C2416 and S3C2450 processors.
-config USB_S3C_HSUDC
- tristate
- depends on USB_GADGET_S3C_HSUDC
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_PXA_U2O
- boolean "PXA9xx Processor USB2.0 controller"
+config USB_PXA_U2O
+ tristate "PXA9xx Processor USB2.0 controller"
+ depends on ARCH_MMP
select USB_GADGET_DUALSPEED
help
PXA9xx Processor series include a high speed USB2.0 device
controller, which support high speed and full speed USB peripheral.
-config USB_PXA_U2O
- tristate
- depends on USB_GADGET_PXA_U2O
- default USB_GADGET
- select USB_GADGET_SELECTED
-
#
# Controllers available in both integrated and discrete versions
#
# musb builds in ../musb along with host support
config USB_GADGET_MUSB_HDRC
- boolean "Inventra HDRC USB Peripheral (TI, ADI, ...)"
+ tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
select USB_GADGET_DUALSPEED
- select USB_GADGET_SELECTED
help
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-config USB_GADGET_M66592
- boolean "Renesas M66592 USB Peripheral Controller"
+config USB_M66592
+ tristate "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
help
M66592 is a discrete USB peripheral controller chip that
dynamically linked module called "m66592_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_M66592
- tristate
- depends on USB_GADGET_M66592
- default USB_GADGET
- select USB_GADGET_SELECTED
-
#
# Controllers available only in discrete form (and all PCI controllers)
#
-config USB_GADGET_AMD5536UDC
- boolean "AMD5536 UDC"
+config USB_AMD5536UDC
+ tristate "AMD5536 UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
dynamically linked module called "amd5536udc" and force all
gadget drivers to also be dynamically linked.
-config USB_AMD5536UDC
- tristate
- depends on USB_GADGET_AMD5536UDC
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_FSL_QE
- boolean "Freescale QE/CPM USB Device Controller"
+config USB_FSL_QE
+ tristate "Freescale QE/CPM USB Device Controller"
depends on FSL_SOC && (QUICC_ENGINE || CPM)
help
Some of Freescale PowerPC processors have a Full Speed
Set CONFIG_USB_GADGET to "m" to build this driver as a
dynamically linked module called "fsl_qe_udc".
-config USB_FSL_QE
- tristate
- depends on USB_GADGET_FSL_QE
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_CI13XXX_PCI
- boolean "MIPS USB CI13xxx PCI UDC"
+config USB_CI13XXX_PCI
+ tristate "MIPS USB CI13xxx PCI UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
dynamically linked module called "ci13xxx_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_CI13XXX_PCI
- tristate
- depends on USB_GADGET_CI13XXX_PCI
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_NET2272
- boolean "PLX NET2272"
+config USB_NET2272
+ tristate "PLX NET2272"
select USB_GADGET_DUALSPEED
help
PLX NET2272 is a USB peripheral controller which supports
dynamically linked module called "net2272" and force all
gadget drivers to also be dynamically linked.
-config USB_GADGET_NET2272_DMA
+config USB_NET2272_DMA
boolean "Support external DMA controller"
- depends on USB_GADGET_NET2272
+ depends on USB_NET2272
help
The NET2272 part can optionally support an external DMA
controller, but your board has to have support in the
If unsure, say "N" here. The driver works fine in PIO mode.
-config USB_NET2272
- tristate
- depends on USB_GADGET_NET2272
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_NET2280
- boolean "NetChip 228x"
+config USB_NET2280
+ tristate "NetChip 228x"
depends on PCI
select USB_GADGET_DUALSPEED
help
dynamically linked module called "net2280" and force all
gadget drivers to also be dynamically linked.
-config USB_NET2280
- tristate
- depends on USB_GADGET_NET2280
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_GOKU
- boolean "Toshiba TC86C001 'Goku-S'"
+config USB_GOKU
+ tristate "Toshiba TC86C001 'Goku-S'"
depends on PCI
help
The Toshiba TC86C001 is a PCI device which includes controllers
dynamically linked module called "goku_udc" and to force all
gadget drivers to also be dynamically linked.
-config USB_GOKU
- tristate
- depends on USB_GADGET_GOKU
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_LANGWELL
- boolean "Intel Langwell USB Device Controller"
+config USB_LANGWELL
+ tristate "Intel Langwell USB Device Controller"
depends on PCI
select USB_GADGET_DUALSPEED
help
dynamically linked module called "langwell_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_LANGWELL
- tristate
- depends on USB_GADGET_LANGWELL
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_EG20T
- boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+config USB_EG20T
+ tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
ML7213 is companion chip for Intel Atom E6xx series.
ML7213 is completely compatible for Intel EG20T PCH.
-config USB_EG20T
- tristate
- depends on USB_GADGET_EG20T
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config USB_GADGET_CI13XXX_MSM
- boolean "MIPS USB CI13xxx for MSM"
+config USB_CI13XXX_MSM
+ tristate "MIPS USB CI13xxx for MSM"
depends on ARCH_MSM
select USB_GADGET_DUALSPEED
select USB_MSM_OTG
dynamically linked module called "ci13xxx_msm" and force all
gadget drivers to also be dynamically linked.
-config USB_CI13XXX_MSM
- tristate
- depends on USB_GADGET_CI13XXX_MSM
- default USB_GADGET
- select USB_GADGET_SELECTED
-
#
# LAST -- dummy/emulated controller
#
-config USB_GADGET_DUMMY_HCD
- boolean "Dummy HCD (DEVELOPMENT)"
+config USB_DUMMY_HCD
+ tristate "Dummy HCD (DEVELOPMENT)"
depends on USB=y || (USB=m && USB_GADGET=m)
select USB_GADGET_DUALSPEED
select USB_GADGET_SUPERSPEED
side is the master; the gadget side is the slave. Gadget drivers
can be high, full, or low speed; and they have access to endpoints
like those from NET2280, PXA2xx, or SA1100 hardware.
-
+
This may help in some stages of creating a driver to embed in a
Linux device, since it lets you debug several parts of the gadget
driver without its hardware or drivers being involved.
-
+
Since such a gadget side driver needs to interoperate with a host
side Linux-USB device driver, this may help to debug both sides
of a USB protocol stack.
dynamically linked module called "dummy_hcd" and force all
gadget drivers to also be dynamically linked.
-config USB_DUMMY_HCD
- tristate
- depends on USB_GADGET_DUMMY_HCD
- default USB_GADGET
- select USB_GADGET_SELECTED
-
# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
# first and will be selected by default.
#
choice
tristate "USB Gadget Drivers"
- depends on USB_GADGET && USB_GADGET_SELECTED
+ depends on USB_GADGET
default USB_ETH
help
A Linux "Gadget Driver" talks to the USB Peripheral Controller
projects / deliverable / linux.git / commitdiff
