ARM: nomadik: move GPIO I2C to S8815 board file

The idea to use two GPIO pins for bit-banged I2C is an S8815
pecularity, so move this over to the board-specific file and
out of the SoC core DTSI file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index c795ee8a356a139a75aea27f7a799a68054df5fe..33caad8df2769835db0d1484bcef912eb0adf375 100644 (file)
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -47,6 +47,14 @@
                                };
                        };
                };
+               gpioi2c {
+                       gpioi2c_default_mode: gpioi2c_default {
+                               gpioi2c_default_cfg {
+                                       ste,pins = "GPIO73_C21", "GPIO74_C20";
+                                       ste,input = <0>;
+                               };
+                       };
+               };
                user-led {
                        user_led_default_mode: user_led_default {
                                user_led_default_cfg {
@@ -65,6 +73,23 @@
                };
        };
 
+       /* GPIO I2C connected to the USB portions of the STw4811 only */
+       gpio-i2c {
+               compatible = "i2c-gpio";
+               gpios = <&gpio2 10 0>, /* sda */
+                       <&gpio2 9 0>; /* scl */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpioi2c_default_mode>;
+
+               stw4811@2d {
+                          compatible = "st,stw4811-usb";
+                          reg = <0x2d>;
+               };
+       };
+
+
        /* Configure card detect for the uSD slot */
        amba {
                mmcsd: sdi@101f6000 {

diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 1ee9372191df2a65f3b445dd1ed68aec054ddbed..49b17c7dfb1b2f13eb6fa652fea69956b3b826c0 100644 (file)
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -169,14 +169,6 @@
                                };
                        };
                };
-               i2c2 {
-                       i2c2_default_mode: i2c2_default {
-                               i2c2_default_cfg {
-                                       ste,pins = "GPIO73_C21", "GPIO74_C20";
-                                       ste,input = <0>;
-                               };
-                       };
-               };
        };
 
        src: src@101e0000 {
@@ -747,22 +739,6 @@
                };
        };
 
-       /* I2C2 connected to the USB portions of the STw4811 only */
-       i2c2 {
-               compatible = "i2c-gpio";
-               gpios = <&gpio2 10 0>, /* sda */
-                       <&gpio2 9 0>; /* scl */
-               #address-cells = <1>;
-               #size-cells = <0>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&i2c2_default_mode>;
-
-               stw4811@2d {
-                          compatible = "st,stw4811-usb";
-                          reg = <0x2d>;
-               };
-       };
-
        amba {
                compatible = "arm,amba-bus";
                #address-cells = <1>;