imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-novena.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
+ imx6ul-pico-hobbit.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
-
- partition@0 {
- label = "bootloader";
- reg = <0x00000000 0x00300000>;
- read-only;
- };
-
- partition@1 {
- label = "environment";
- reg = <0x00300000 0x00080000>;
- };
-
- partition@2 {
- label = "redundant-environment";
- reg = <0x00380000 0x00080000>;
- };
-
- partition@3 {
- label = "kernel";
- reg = <0x00400000 0x00400000>;
- };
-
- partition@4 {
- label = "filesystem";
- reg = <0x00800000 0x0f800000>;
- };
};
};
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 0>;
};
+
+ reg_usb_otg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 0>;
+ };
};
sound {
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x000b0
+ >;
+ };
+
led_pin_gpio: led_gpio@0 {
fsl,pins = <
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
};
&usbotg {
- dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ vbus-supply = <®_usb_otg_vbus>;
+ disable-over-current;
status = "okay";
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
/* kHz uV */
996000 1250000
792000 1175000
- 396000 1075000
+ 396000 1150000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
};
};
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
};
};
+&ipu1_di0_disp1 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
};
};
};
-&ldb {
+&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
status = "okay";
lvds0: lvds-channel@0 {
};
};
-&ldb {
+&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
status = "okay";
lvds0: lvds-channel@0 {
chosen {
stdout-path = &uart3;
};
+};
- panel-lvds0 {
- compatible = "auo,b133htn01";
- backlight = <&backlight_lvds>;
- ddc-i2c-bus = <&mux2_i2c2>;
-
- port {
- panel_in_lvds0: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
- };
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
};
&ldb {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
fsl,dual-channel;
status = "okay";
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
-
- port@4 {
- reg = <4>;
-
- lvds0_out: endpoint {
- remote-endpoint = <&panel_in_lvds0>;
- };
- };
};
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
};
&iomuxc {
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <®_3p3v>;
};
--- /dev/null
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Embest MarS Board i.MX6Dual";
+ compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user1 {
+ label = "imx6:green:user1";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ user2 {
+ label = "imx6:green:user2";
+ gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ fsl,spi-num-chipselects = <1>;
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000b1 /* CS0 */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
+ /* AR8035 pin strapping: IO voltage: pull up */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ /* AR8035 pin strapping: PHYADDR#0: pull down */
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ /* AR8035 pin strapping: PHYADDR#1: pull down */
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0
+ /* AR8035 pin strapping: MODE#1: pull up */
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ /* AR8035 pin strapping: MODE#3: pull up */
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ /* AR8035 pin strapping: MODE#0: pull down */
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ /* GPIO16 -> AR8035 25MHz */
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ /* RGMII_nRST */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0
+ /* AR8035 interrupt */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* LED1 */
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* LED2 */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* USB OTG POWER ENABLE */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17009
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10009
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17009
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17009
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17009
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17009
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17009
+ >;
+ };
+};
status = "okay";
sgtl5000: sgtl5000@0a {
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
#size-cells = <0>;
reg = <2>;
- ipu2_di0_disp0: endpoint@0 {
+ ipu2_di0_disp0: disp0-endpoint {
};
- ipu2_di0_hdmi: endpoint@1 {
+ ipu2_di0_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_2>;
};
- ipu2_di0_mipi: endpoint@2 {
+ ipu2_di0_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_2>;
};
- ipu2_di0_lvds0: endpoint@3 {
+ ipu2_di0_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_2>;
};
- ipu2_di0_lvds1: endpoint@4 {
+ ipu2_di0_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_2>;
};
};
#size-cells = <0>;
reg = <3>;
- ipu2_di1_hdmi: endpoint@1 {
+ ipu2_di1_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_3>;
};
- ipu2_di1_mipi: endpoint@2 {
+ ipu2_di1_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_3>;
};
- ipu2_di1_lvds0: endpoint@3 {
+ ipu2_di1_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_3>;
};
- ipu2_di1_lvds1: endpoint@4 {
+ ipu2_di1_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_3>;
};
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_1p8v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_1p8v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <®_3p3v>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
vbus-supply = <®_usb_h1_vbus>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
status = "okay";
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1@110 {
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
anatop-max-voltage = <1375000>;
};
- regulator-3p0@120 {
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
anatop-max-voltage = <3400000>;
};
- regulator-2p5@130 {
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2000000>;
anatop-max-voltage = <2750000>;
};
- reg_arm: regulator-vddcore@140 {
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu@140 {
+ reg_pu: regulator-vddpu {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@140 {
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
#size-cells = <0>;
reg = <2>;
- ipu1_di0_disp0: endpoint@0 {
+ ipu1_di0_disp0: disp0-endpoint {
};
- ipu1_di0_hdmi: endpoint@1 {
+ ipu1_di0_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_0>;
};
- ipu1_di0_mipi: endpoint@2 {
+ ipu1_di0_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_0>;
};
- ipu1_di0_lvds0: endpoint@3 {
+ ipu1_di0_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_0>;
};
- ipu1_di0_lvds1: endpoint@4 {
+ ipu1_di0_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_0>;
};
};
#size-cells = <0>;
reg = <3>;
- ipu1_di0_disp1: endpoint@0 {
+ ipu1_di0_disp1: disp1-endpoint {
};
- ipu1_di1_hdmi: endpoint@1 {
+ ipu1_di1_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_1>;
};
- ipu1_di1_mipi: endpoint@2 {
+ ipu1_di1_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_1>;
};
- ipu1_di1_lvds0: endpoint@3 {
+ ipu1_di1_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_1>;
};
- ipu1_di1_lvds1: endpoint@4 {
+ ipu1_di1_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_1>;
};
};
996000 1250000
792000 1175000
396000 1175000
+ 198000 1175000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1250000
792000 1175000
396000 1175000
+ 198000 1175000
>;
};
996000 1250000
792000 1175000
396000 1075000
+ 198000 975000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1175000
792000 1175000
396000 1175000
+ 198000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX6SX_CLK_ARM>,
enable-active-high;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "mx6ul-wm8960";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Speaker", "SPK_LP",
+ "Speaker", "SPK_LN",
+ "Speaker", "SPK_RP",
+ "Speaker", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "RINPUT2", "Mic Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <786432000>;
};
&cpu0 {
soc-supply = <®_soc>;
};
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ wlf,shared-lrclk;
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
};
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <12288000>;
+ status = "okay";
+};
+
&snvs_poweroff {
status = "okay";
};
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
--- /dev/null
+/*
+ * Copyright 2015 Technexion Ltd.
+ *
+ * Author: Wig Cheng <wig.cheng@technexion.com>
+ * Richard Hu <richard.hu@technexion.com>
+ * Tapani Utriainen <tapani@technexion.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+ model = "Technexion Pico i.MX6UL Board";
+ compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
+
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = &uart6;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 6 0>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6ul-sgtl5000";
+ audio-cpu = <&sai1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ };
+
+ sys_mclk: clock-sys-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ hobbitled {
+ label = "hobbitled";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+ phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <11>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ /* VDD_ARM_SOC_IN*/
+ sw1b_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* DRAM */
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DRAM */
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&sys_mclk>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c3 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <33200000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <46>;
+ hsync-len = <1>;
+ vback-porch = <22>;
+ vfront-porch = <23>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ dr_mode = "otg";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0
+ MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ /* LCD reset */
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0
+ MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0
+ MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0
+ MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
+ MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
+ MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
+ MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
+ MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
+ MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+};
clock-latency = <61036>; /* two CLK32 periods */
operating-points = <
/* kHz uV */
- 528000 1250000
- 396000 1150000
- 198000 1150000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
>;
fsl,soc-operating-points = <
/* KHz uV */
- 528000 1250000
- 396000 1150000
- 198000 1150000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
>;
clocks = <&clks IMX6UL_CLK_ARM>,
<&clks IMX6UL_CLK_PLL2_BUS>,
projects / deliverable / linux.git / commitdiff
