--- /dev/null
+/*
+ * Device tree source for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "MVME2500";
+ compatible = "artesyn,MVME2500";
+
+ aliases {
+ serial2 = &serial2;
+ serial3 = &serial3;
+ serial4 = &serial4;
+ serial5 = &serial5;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0 0xffe00000 0x100000>;
+
+ i2c@3000 {
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ interrupts = <8 1 0 0>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c512";
+ reg = <0x52>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c512";
+ reg = <0x53>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ };
+
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <2>;
+
+ flash@0 {
+ compatible = "atmel,at25df641";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+ flash@1 {
+ compatible = "atmel,at25df641";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ usb@22000 {
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy1: ethernet-phy@1 {
+ compatible = "brcm,bcm54616S";
+ interrupts = <6 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "brcm,bcm54616S";
+ interrupts = <6 1 0 0>;
+ reg = <0x2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "brcm,bcm54616S";
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ };
+
+ phy7: ethernet-phy@7 {
+ compatible = "brcm,bcm54616S";
+ interrupts = <7 1 0 0>;
+ reg = <0x7>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy7>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
+ 0x1 0x0 0x0 0xffc40000 0x00010000
+ 0x2 0x0 0x0 0xffc50000 0x00010000
+ 0x3 0x0 0x0 0xffc60000 0x00010000
+ 0x4 0x0 0x0 0xffc70000 0x00010000
+ 0x6 0x0 0x0 0xffc80000 0x00010000
+ 0x5 0x0 0x0 0xffdf0000 0x00008000>;
+
+ serial2: serial@1,0 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x1 0x0 0x100>;
+ clock-frequency = <1843200>;
+ interrupts = <11 2 0 0>;
+ };
+
+ serial3: serial@2,0 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x2 0x0 0x100>;
+ clock-frequency = <1843200>;
+ interrupts = <1 2 0 0>;
+ };
+
+ serial4: serial@3,0 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x3 0x0 0x100>;
+ clock-frequency = <1843200>;
+ interrupts = <2 2 0 0>;
+ };
+
+ serial5: serial@4,0 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4 0x0 0x100>;
+ clock-frequency = <1843200>;
+ interrupts = <3 2 0 0>;
+ };
+
+ mram@0,0 {
+ compatible = "everspin,mram", "mtd-ram";
+ reg = <0x0 0x0 0x80000>;
+ bank-width = <2>;
+ };
+
+ board-control@5,0 {
+ compatible = "artesyn,mvme2500-fpga";
+ reg = <0x5 0x0 0x01000>;
+ };
+
+ cpld@6,0 {
+ compatible = "artesyn,mvme2500-cpld";
+ reg = <0x6 0x0 0x10000>;
+ interrupts = <9 1 0 0>;
+ };
+ };
+
+ pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+
+ pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+
+ };
+
+ pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+};
+
+/include/ "fsl/p2020si-post.dtsi"
+
+/ {
+ soc@ffe00000 {
+ serial@4600 {
+ status = "disabled";
+ };
+
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ sdhc@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ non-removable;
+ };
+
+ };
+
+};
--- /dev/null
+/*
+ * Board setup routines for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Based on earlier code by:
+ *
+ * Xianghua Xiao (x.xiao@freescale.com)
+ * Tom Armistead (tom.armistead@emerson.com)
+ * Copyright 2012 Emerson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Author Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ */
+
+#include <linux/pci.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+void __init mvme2500_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme2500_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mvme2500_setup_arch()", 0);
+ fsl_pci_assign_primary();
+ pr_info("MVME2500 board from Artesyn\n");
+}
+
+machine_arch_initcall(mvme2500, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme2500_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "artesyn,MVME2500");
+}
+
+define_machine(mvme2500) {
+ .name = "MVME2500",
+ .probe = mvme2500_probe,
+ .setup_arch = mvme2500_setup_arch,
+ .init_IRQ = mvme2500_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
projects / deliverable / linux.git / commitdiff
