#include <mach/irqs.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "common.h"
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/cputype.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
+++ /dev/null
-/*
- * linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- * SRAM Memory Management
- *
- * Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY 512
-
-enum sram_type {
- MMP_SRAM_UNDEFINED = 0,
- MMP_ASRAM,
- MMP_ISRAM,
-};
-
-struct sram_platdata {
- char *pool_name;
- int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
#include <linux/slab.h>
#include <linux/genalloc.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
struct sram_bank_info {
char *pool_name;
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/balloon3.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
#include "devices.h"
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include "generic.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa300.h>
#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/audio.h>
#include "generic.h"
#include <mach/pxa320.h>
#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <asm/pmu.h>
#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/eseries-gpio.h>
#include <mach/eseries-irq.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/flash.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
#include <mach/pxa27x.h>
#include <mach/hx4700.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/bitfield.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include "devices.h"
+++ /dev/null
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
- int cd_gpio;
- int rdy_gpio;
- int pwr_gpio;
- void (*reset)(int state);
-};
-
-#endif
+++ /dev/null
-/*
- camera.h - PXA camera driver header file
-
- Copyright (C) 2003, Intel Corporation
- Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER 1
-#define PXA_CAMERA_DATAWIDTH_4 2
-#define PXA_CAMERA_DATAWIDTH_5 4
-#define PXA_CAMERA_DATAWIDTH_8 8
-#define PXA_CAMERA_DATAWIDTH_9 0x10
-#define PXA_CAMERA_DATAWIDTH_10 0x20
-#define PXA_CAMERA_PCLK_EN 0x40
-#define PXA_CAMERA_MCLK_EN 0x80
-#define PXA_CAMERA_PCP 0x100
-#define PXA_CAMERA_HSP 0x200
-#define PXA_CAMERA_VSP 0x400
-
-struct pxacamera_platform_data {
- unsigned long flags;
- unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
+++ /dev/null
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF 1
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-
-struct pxaficp_platform_data {
- int transceiver_cap;
- void (*transceiver_mode)(struct device *dev, int mode);
- int (*startup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
- bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
- unsigned int ocr_mask; /* available voltages */
- unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
- int (*init)(struct device *, irq_handler_t , void *);
- int (*get_ro)(struct device *);
- void (*setpower)(struct device *, unsigned int);
- void (*exit)(struct device *, void *);
- int gpio_card_detect; /* gpio detecting card insertion */
- int gpio_card_ro; /* gpio detecting read only toggle */
- bool gpio_card_ro_invert; /* gpio ro is inverted */
- int gpio_power; /* gpio powering up MMC bus */
- bool gpio_power_invert; /* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-
- unsigned long flags;
-#define ENABLE_PORT1 (1 << 0)
-#define ENABLE_PORT2 (1 << 1)
-#define ENABLE_PORT3 (1 << 2)
-#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW (1 << 3)
-#define POWER_CONTROL_LOW (1 << 4)
-#define NO_OC_PROTECTION (1 << 5)
-#define OC_MODE_GLOBAL (0 << 6)
-#define OC_MODE_PERPORT (1 << 6)
-
- int power_on_delay; /* Power On to Power Good time - in ms
- * HCD must wait for this duration before
- * accessing a powered on port
- */
- int port_mode;
-#define PMM_NPS_MODE 1
-#define PMM_GLOBAL_MODE 2
-#define PMM_PERPORT_MODE 3
-
- int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
+++ /dev/null
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
- int jack_gpio;
-};
-
-#endif
+++ /dev/null
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_PATA_PXA_H__
-#define __MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
- /* PXA DMA DREQ<0:2> pin */
- uint32_t dma_dreq;
- /* Register shift */
- uint32_t reg_shift;
- /* IRQ flags */
- uint32_t irq_flags;
-};
-
-#endif /* __MACH_PATA_PXA_H__ */
+++ /dev/null
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN (1 << 0)
-#define ULPI_SER_3PIN (1 << 1)
- unsigned int ulpi_mode;
-
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
- int up_key;
- int down_key;
- int rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
- int x_filter;
- int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
+++ /dev/null
-/*
- * arch/arm/mach-pxa/include/mach/pxafb.h
- *
- * Support for the xscale frame buffer.
- *
- * Author: Jean-Frederic Clere
- * Created: Sep 22, 2003
- * Copyright: jfclere@sinix.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- * STN - for passive matrix
- * DSTN - for dual scan passive matrix
- * TFT - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit 18 : for output enable polarity
- * bit 19 : for pixel clock edge
- * bit 20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK 0xf
-#define LCD_TYPE_UNKNOWN 0
-#define LCD_TYPE_MONO_STN 1
-#define LCD_TYPE_MONO_DSTN 2
-#define LCD_TYPE_COLOR_STN 3
-#define LCD_TYPE_COLOR_DSTN 4
-#define LCD_TYPE_COLOR_TFT 5
-#define LCD_TYPE_SMART_PANEL 6
-#define LCD_TYPE_MAX 7
-
-#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
-#define LCD_BIAS_ACTIVE_LOW (1 << 18)
-#define LCD_PCLK_EDGE_RISE (0 << 19)
-#define LCD_PCLK_EDGE_FALL (1 << 19)
-#define LCD_ALTERNATE_MAPPING (1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_char bpp;
- u_int cmap_greyscale:1,
- depth:8,
- transparency:1,
- unused:22;
-
- /* Parallel Mode Timing */
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
-
- /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
- * Note:
- * 1. all parameters in nanosecond (ns)
- * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
- * in pxa27x and pxa3xx, initialize them to the same value or
- * the larger one will be used
- * 3. same to {rd,wr}_pulse_width
- *
- * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
- * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
- * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
- */
- unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
- unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
- unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
- unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
- unsigned cmd_inh_time; /* Command Inhibit time between two writes */
- unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
- struct pxafb_mode_info *modes;
- unsigned int num_modes;
-
- unsigned int lcd_conn;
- unsigned long video_mem_size;
-
- u_int fixed_modes:1,
- cmap_inverse:1,
- cmap_static:1,
- acceleration_enabled:1,
- unused:28;
-
- /* The following should be defined in LCCR0
- * LCCR0_Act or LCCR0_Pas Active or Passive
- * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
- * LCCR0_Mono or LCCR0_Color Mono/Color
- * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
- * LCCR0_DMADel(Tcpu) (optional) DMA request delay
- *
- * The following should not be defined in LCCR0:
- * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
- * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
- */
- u_int lccr0;
- /* The following should be defined in LCCR3
- * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
- * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
- * LCCR3_Acb(X) AB Bias pin frequency
- * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
- *
- * The following should not be defined in LCCR3
- * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
- */
- u_int lccr3;
- /* The following should be defined in LCCR4
- * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
- *
- * All other bits in LCCR4 should be left alone.
- */
- u_int lccr4;
- void (*pxafb_backlight_power)(int);
- void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
- void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
- uint16_t *cmds, int n)
-{
- return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-#endif
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pm.h>
#include <mach/smemc.h>
#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <media/soc_camera.h>
#include <linux/gpio.h>
#include <linux/i2c/pxa-i2c.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa320.h>
#include <mach/mxm8x10.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include <mach/pm.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <media/soc_camera.h>
#include <media/soc_camera.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
#include <mach/irqs.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
#include <mach/hardware.h>
#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
struct pxa3xx_u2d_ulpi {
struct clk *clk;
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/flash.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/audio.h>
#include <mach/pxa27x.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/viper.h>
#include <asm/setup.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x.h>
#include <mach/mfp-pxa27x.h>
#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/pm.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/pm.h>
#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/zeus.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
+++ /dev/null
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS (8)
-#define MAX_MATRIX_KEY_COLS (8)
-#define MATRIX_ROW_SHIFT (3)
-#define MAX_DIRECT_KEY_NUM (8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- * _plus_ the number of rotary-encoder sensor inputs, this can be
- * left as 0 if only rotary encoders are enabled, the driver will
- * automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- * encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- * default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
- /* code map for the matrix keys */
- unsigned int matrix_key_rows;
- unsigned int matrix_key_cols;
- unsigned int *matrix_key_map;
- int matrix_key_map_size;
-
- /* direct keys */
- int direct_key_num;
- unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
- /* the key output may be low active */
- int direct_key_low_active;
- /* give board a chance to choose the start direct key */
- unsigned int direct_key_mask;
-
- /* rotary encoders 0 */
- int enable_rotary0;
- int rotary0_rel_code;
- int rotary0_up_key;
- int rotary0_down_key;
-
- /* rotary encoders 1 */
- int enable_rotary1;
- int rotary1_rel_code;
- int rotary1_up_key;
- int rotary1_down_key;
-
- /* key debounce interval */
- unsigned int debounce_interval;
-
- /* clear wakeup event requirement for pxa168 */
- void (*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
- unsigned int tCH; /* Enable signal hold time */
- unsigned int tCS; /* Enable signal setup time */
- unsigned int tWH; /* ND_nWE high duration */
- unsigned int tWP; /* ND_nWE pulse time */
- unsigned int tRH; /* ND_nRE high duration */
- unsigned int tRP; /* ND_nRE pulse width */
- unsigned int tR; /* ND_nWE high to ND_nRE low for read */
- unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
- unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
- uint16_t read1;
- uint16_t read2;
- uint16_t program;
- uint16_t read_status;
- uint16_t read_id;
- uint16_t erase;
- uint16_t reset;
- uint16_t lock;
- uint16_t unlock;
- uint16_t lock_status;
-};
-
-struct pxa3xx_nand_flash {
- char *name;
- uint32_t chip_id;
- unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
- unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
- unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
- unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
- unsigned int num_blocks; /* Number of physical blocks in Flash */
-
- struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT (2)
-struct pxa3xx_nand_platform_data {
-
- /* the data flash bus is shared between the Static Memory
- * Controller and the Data Flash Controller, the arbiter
- * controls the ownership of the bus
- */
- int enable_arbiter;
-
- /* allow platform code to keep OBM/bootloader defined NFC config */
- int keep_config;
-
- /* indicate how many chip selects will be used */
- int num_cs;
-
- const struct mtd_partition *parts[NUM_CHIP_SELECT];
- unsigned int nr_parts[NUM_CHIP_SELECT];
-
- const struct pxa3xx_nand_flash * flash;
- size_t num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
#include <scsi/scsi_host.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include <mach/dma.h>
#define DRV_NAME "pata_pxa"
#include <linux/platform_device.h>
#include <linux/device.h>
#include <mach/regs-icu.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
#include "dmaengine.h"
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
/*
* Keypad Controller registers
*/
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/pxa930_rotary.h>
+#include <linux/platform_data/keyboard-pxa930_rotary.h>
#define SBCR (0x04)
#define ERCR (0x0c)
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/pxa930_trkball.h>
+#include <linux/platform_data/mouse-pxa930_trkball.h>
/* Trackball Controller Register Definitions */
#define TBCR (0x000C)
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#define PXA_CAM_VERSION "0.0.6"
#define PXA_CAM_DRV_NAME "pxa27x-camera"
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "pxamci.h"
#include <linux/slab.h>
#include <mach/dma.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#define NAND_STOP_DELAY (2 * HZ/50)
#include <net/irda/irda_device.h>
#include <mach/dma.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/regs-uart.h>
#include <mach/regs-ost.h>
#include <asm/irq.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <mach/hardware.h>
-#include <mach/ohci.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
/*
* UHC: USB Host Controller (OHCI-like) register definitions
#include <asm/irq.h>
#include <asm/div64.h>
#include <mach/bitfield.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
/*
* Complain if VAR is out of range.
--- /dev/null
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+
+struct palm27x_asoc_info {
+ int jack_gpio;
+};
+
+#endif
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+ /* PXA DMA DREQ<0:2> pin */
+ uint32_t dma_dreq;
+ /* Register shift */
+ uint32_t reg_shift;
+ /* IRQ flags */
+ uint32_t irq_flags;
+};
+
+#endif /* __MACH_PATA_PXA_H__ */
--- /dev/null
+/*
+ camera.h - PXA camera driver header file
+
+ Copyright (C) 2003, Intel Corporation
+ Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER 1
+#define PXA_CAMERA_DATAWIDTH_4 2
+#define PXA_CAMERA_DATAWIDTH_5 4
+#define PXA_CAMERA_DATAWIDTH_8 8
+#define PXA_CAMERA_DATAWIDTH_9 0x10
+#define PXA_CAMERA_DATAWIDTH_10 0x20
+#define PXA_CAMERA_PCLK_EN 0x40
+#define PXA_CAMERA_MCLK_EN 0x80
+#define PXA_CAMERA_PCP 0x100
+#define PXA_CAMERA_HSP 0x200
+#define PXA_CAMERA_VSP 0x400
+
+struct pxacamera_platform_data {
+ unsigned long flags;
+ unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ * SRAM Memory Management
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+enum sram_type {
+ MMP_SRAM_UNDEFINED = 0,
+ MMP_ASRAM,
+ MMP_ISRAM,
+};
+
+struct sram_platdata {
+ char *pool_name;
+ int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
--- /dev/null
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF 1
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+
+struct pxaficp_platform_data {
+ int transceiver_cap;
+ void (*transceiver_mode)(struct device *dev, int mode);
+ int (*startup)(struct device *dev);
+ void (*shutdown)(struct device *dev);
+ int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
+ bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
--- /dev/null
+#ifndef __ASM_ARCH_PXA930_ROTARY_H
+#define __ASM_ARCH_PXA930_ROTARY_H
+
+/* NOTE:
+ *
+ * rotary can be either interpreted as a ralative input event (e.g.
+ * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
+ * or LEFT/RIGHT), depending on if up_key & down_key are assigned
+ * or rel_code is assigned a non-zero value. When all are non-zero,
+ * up_key and down_key will be preferred.
+ */
+struct pxa930_rotary_platform_data {
+ int up_key;
+ int down_key;
+ int rel_code;
+};
+
+void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA930_ROTARY_H */
--- /dev/null
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX_MATRIX_KEY_ROWS (8)
+#define MAX_MATRIX_KEY_COLS (8)
+#define MATRIX_ROW_SHIFT (3)
+#define MAX_DIRECT_KEY_NUM (8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ * _plus_ the number of rotary-encoder sensor inputs, this can be
+ * left as 0 if only rotary encoders are enabled, the driver will
+ * automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ * encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ * default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
+ */
+struct pxa27x_keypad_platform_data {
+
+ /* code map for the matrix keys */
+ unsigned int matrix_key_rows;
+ unsigned int matrix_key_cols;
+ unsigned int *matrix_key_map;
+ int matrix_key_map_size;
+
+ /* direct keys */
+ int direct_key_num;
+ unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
+ /* the key output may be low active */
+ int direct_key_low_active;
+ /* give board a chance to choose the start direct key */
+ unsigned int direct_key_mask;
+
+ /* rotary encoders 0 */
+ int enable_rotary0;
+ int rotary0_rel_code;
+ int rotary0_up_key;
+ int rotary0_down_key;
+
+ /* rotary encoders 1 */
+ int enable_rotary1;
+ int rotary1_rel_code;
+ int rotary1_up_key;
+ int rotary1_down_key;
+
+ /* key debounce interval */
+ unsigned int debounce_interval;
+
+ /* clear wakeup event requirement for pxa168 */
+ void (*clear_wakeup_event)(void);
+};
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
--- /dev/null
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+ unsigned int ocr_mask; /* available voltages */
+ unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
+ int (*init)(struct device *, irq_handler_t , void *);
+ int (*get_ro)(struct device *);
+ void (*setpower)(struct device *, unsigned int);
+ void (*exit)(struct device *, void *);
+ int gpio_card_detect; /* gpio detecting card insertion */
+ int gpio_card_ro; /* gpio detecting read only toggle */
+ bool gpio_card_ro_invert; /* gpio ro is inverted */
+ int gpio_power; /* gpio powering up MMC bus */
+ bool gpio_power_invert; /* gpio power is inverted */
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
--- /dev/null
+#ifndef __ASM_ARCH_PXA930_TRKBALL_H
+#define __ASM_ARCH_PXA930_TRKBALL_H
+
+struct pxa930_trkball_platform_data {
+ int x_filter;
+ int y_filter;
+};
+
+#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
+
--- /dev/null
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_timing {
+ unsigned int tCH; /* Enable signal hold time */
+ unsigned int tCS; /* Enable signal setup time */
+ unsigned int tWH; /* ND_nWE high duration */
+ unsigned int tWP; /* ND_nWE pulse time */
+ unsigned int tRH; /* ND_nRE high duration */
+ unsigned int tRP; /* ND_nRE pulse width */
+ unsigned int tR; /* ND_nWE high to ND_nRE low for read */
+ unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
+ unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_cmdset {
+ uint16_t read1;
+ uint16_t read2;
+ uint16_t program;
+ uint16_t read_status;
+ uint16_t read_id;
+ uint16_t erase;
+ uint16_t reset;
+ uint16_t lock;
+ uint16_t unlock;
+ uint16_t lock_status;
+};
+
+struct pxa3xx_nand_flash {
+ char *name;
+ uint32_t chip_id;
+ unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
+ unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
+ unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
+ unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
+ unsigned int num_blocks; /* Number of physical blocks in Flash */
+
+ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+};
+
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
+struct pxa3xx_nand_platform_data {
+
+ /* the data flash bus is shared between the Static Memory
+ * Controller and the Data Flash Controller, the arbiter
+ * controls the ownership of the bus
+ */
+ int enable_arbiter;
+
+ /* allow platform code to keep OBM/bootloader defined NFC config */
+ int keep_config;
+
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
+
+ const struct pxa3xx_nand_flash * flash;
+ size_t num_flash;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
--- /dev/null
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+ int cd_gpio;
+ int rdy_gpio;
+ int pwr_gpio;
+ void (*reset)(int state);
+};
+
+#endif
--- /dev/null
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+
+ unsigned long flags;
+#define ENABLE_PORT1 (1 << 0)
+#define ENABLE_PORT2 (1 << 1)
+#define ENABLE_PORT3 (1 << 2)
+#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW (1 << 3)
+#define POWER_CONTROL_LOW (1 << 4)
+#define NO_OC_PROTECTION (1 << 5)
+#define OC_MODE_GLOBAL (0 << 6)
+#define OC_MODE_PERPORT (1 << 6)
+
+ int power_on_delay; /* Power On to Power Good time - in ms
+ * HCD must wait for this duration before
+ * accessing a powered on port
+ */
+ int port_mode;
+#define PMM_NPS_MODE 1
+#define PMM_GLOBAL_MODE 2
+#define PMM_PERPORT_MODE 3
+
+ int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
--- /dev/null
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN (1 << 0)
+#define ULPI_SER_3PIN (1 << 1)
+ unsigned int ulpi_mode;
+
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
--- /dev/null
+/*
+ * arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ * Support for the xscale frame buffer.
+ *
+ * Author: Jean-Frederic Clere
+ * Created: Sep 22, 2003
+ * Copyright: jfclere@sinix.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ * STN - for passive matrix
+ * DSTN - for dual scan passive matrix
+ * TFT - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit 18 : for output enable polarity
+ * bit 19 : for pixel clock edge
+ * bit 20 : for output pixel format when base is RGBT16
+ */
+#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_MASK 0xf
+#define LCD_TYPE_UNKNOWN 0
+#define LCD_TYPE_MONO_STN 1
+#define LCD_TYPE_MONO_DSTN 2
+#define LCD_TYPE_COLOR_STN 3
+#define LCD_TYPE_COLOR_DSTN 4
+#define LCD_TYPE_COLOR_TFT 5
+#define LCD_TYPE_SMART_PANEL 6
+#define LCD_TYPE_MAX 7
+
+#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
+#define LCD_BIAS_ACTIVE_LOW (1 << 18)
+#define LCD_PCLK_EDGE_RISE (0 << 19)
+#define LCD_PCLK_EDGE_FALL (1 << 19)
+#define LCD_ALTERNATE_MAPPING (1 << 20)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+ u_long pixclock;
+
+ u_short xres;
+ u_short yres;
+
+ u_char bpp;
+ u_int cmap_greyscale:1,
+ depth:8,
+ transparency:1,
+ unused:22;
+
+ /* Parallel Mode Timing */
+ u_char hsync_len;
+ u_char left_margin;
+ u_char right_margin;
+
+ u_char vsync_len;
+ u_char upper_margin;
+ u_char lower_margin;
+ u_char sync;
+
+ /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+ * Note:
+ * 1. all parameters in nanosecond (ns)
+ * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+ * in pxa27x and pxa3xx, initialize them to the same value or
+ * the larger one will be used
+ * 3. same to {rd,wr}_pulse_width
+ *
+ * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
+ * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
+ * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
+ */
+ unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+ unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+ unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
+ unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
+ unsigned cmd_inh_time; /* Command Inhibit time between two writes */
+ unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+ struct pxafb_mode_info *modes;
+ unsigned int num_modes;
+
+ unsigned int lcd_conn;
+ unsigned long video_mem_size;
+
+ u_int fixed_modes:1,
+ cmap_inverse:1,
+ cmap_static:1,
+ acceleration_enabled:1,
+ unused:28;
+
+ /* The following should be defined in LCCR0
+ * LCCR0_Act or LCCR0_Pas Active or Passive
+ * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
+ * LCCR0_Mono or LCCR0_Color Mono/Color
+ * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+ * LCCR0_DMADel(Tcpu) (optional) DMA request delay
+ *
+ * The following should not be defined in LCCR0:
+ * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+ * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+ */
+ u_int lccr0;
+ /* The following should be defined in LCCR3
+ * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
+ * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+ * LCCR3_Acb(X) AB Bias pin frequency
+ * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
+ *
+ * The following should not be defined in LCCR3
+ * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+ */
+ u_int lccr3;
+ /* The following should be defined in LCCR4
+ * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+ *
+ * All other bits in LCCR4 should be left alone.
+ */
+ u_int lccr4;
+ void (*pxafb_backlight_power)(int);
+ void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+ void (*smart_update)(struct fb_info *);
+};
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+ uint16_t *cmds, int n)
+{
+ return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+ return 0;
+}
+#endif
#include <asm/mach-types.h>
#include <mach/audio.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-ac97.h"
projects / deliverable / linux.git / commitdiff
