USB: host: Rename ehci-s5p to ehci-exynos
authorJingoo Han <jg1.han@samsung.com>
Thu, 10 Oct 2013 07:42:47 +0000 (16:42 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 11 Oct 2013 23:56:00 +0000 (16:56 -0700)
Currently, Samsung is using 'EXYNOS' as the name of Samsung SoCs.
Thus, ehci-exynos is preferred than ehci-s5p.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/ehci-exynos.c [new file with mode: 0644]
drivers/usb/host/ehci-s5p.c [deleted file]

index 70cb1a94befffd2dead030fb346844e64a5507f5..80e72fba01f4814970d7ebe02fe19605606ca7f6 100644 (file)
@@ -203,12 +203,11 @@ config USB_EHCI_SH
          Enables support for the on-chip EHCI controller on the SuperH.
          If you use the PCI EHCI controller, this option is not necessary.
 
-config USB_EHCI_S5P
+config USB_EHCI_EXYNOS
        tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
        depends on PLAT_S5P || ARCH_EXYNOS
        help
-       Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
-       on-chip EHCI controller.
+       Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
 
 config USB_EHCI_MV
        bool "EHCI support for Marvell PXA/MMP USB controller"
index 0b9fdeecf6838eab63cdf8e676df884ced9e8e5f..9dc11c2ee45410ce7a3e4a2fd7af722bfb64e937 100644 (file)
@@ -34,7 +34,7 @@ obj-$(CONFIG_USB_EHCI_MXC)    += ehci-mxc.o
 obj-$(CONFIG_USB_EHCI_HCD_OMAP)        += ehci-omap.o
 obj-$(CONFIG_USB_EHCI_HCD_ORION)       += ehci-orion.o
 obj-$(CONFIG_USB_EHCI_HCD_SPEAR)       += ehci-spear.o
-obj-$(CONFIG_USB_EHCI_S5P)     += ehci-s5p.o
+obj-$(CONFIG_USB_EHCI_EXYNOS)  += ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_MSM)     += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_TEGRA)   += ehci-tegra.o
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
new file mode 100644 (file)
index 0000000..016352e
--- /dev/null
@@ -0,0 +1,301 @@
+/*
+ * SAMSUNG EXYNOS USB HOST EHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI EXYNOS driver"
+
+#define EHCI_INSNREG00(base)                   (base + 0x90)
+#define EHCI_INSNREG00_ENA_INCR16              (0x1 << 25)
+#define EHCI_INSNREG00_ENA_INCR8               (0x1 << 24)
+#define EHCI_INSNREG00_ENA_INCR4               (0x1 << 23)
+#define EHCI_INSNREG00_ENA_INCRX_ALIGN         (0x1 << 22)
+#define EHCI_INSNREG00_ENABLE_DMA_BURST        \
+       (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
+        EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
+
+static const char hcd_name[] = "ehci-exynos";
+static struct hc_driver __read_mostly exynos_ehci_hc_driver;
+
+struct exynos_ehci_hcd {
+       struct clk *clk;
+       struct usb_phy *phy;
+       struct usb_otg *otg;
+};
+
+#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
+
+static void exynos_setup_vbus_gpio(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       int err;
+       int gpio;
+
+       if (!dev->of_node)
+               return;
+
+       gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
+       if (!gpio_is_valid(gpio))
+               return;
+
+       err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
+                                   "ehci_vbus_gpio");
+       if (err)
+               dev_err(dev, "can't request ehci vbus gpio %d", gpio);
+}
+
+static int exynos_ehci_probe(struct platform_device *pdev)
+{
+       struct exynos_ehci_hcd *exynos_ehci;
+       struct usb_hcd *hcd;
+       struct ehci_hcd *ehci;
+       struct resource *res;
+       struct usb_phy *phy;
+       int irq;
+       int err;
+
+       /*
+        * Right now device-tree probed devices don't get dma_mask set.
+        * Since shared usb code relies on it, set it here for now.
+        * Once we move to full device tree support this will vanish off.
+        */
+       if (!pdev->dev.dma_mask)
+               pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+       if (!pdev->dev.coherent_dma_mask)
+               pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+       exynos_setup_vbus_gpio(pdev);
+
+       hcd = usb_create_hcd(&exynos_ehci_hc_driver,
+                            &pdev->dev, dev_name(&pdev->dev));
+       if (!hcd) {
+               dev_err(&pdev->dev, "Unable to create HCD\n");
+               return -ENOMEM;
+       }
+       exynos_ehci = to_exynos_ehci(hcd);
+
+       if (of_device_is_compatible(pdev->dev.of_node,
+                                       "samsung,exynos5440-ehci"))
+               goto skip_phy;
+
+       phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+       if (IS_ERR(phy)) {
+               usb_put_hcd(hcd);
+               dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
+               return -EPROBE_DEFER;
+       } else {
+               exynos_ehci->phy = phy;
+               exynos_ehci->otg = phy->otg;
+       }
+
+skip_phy:
+
+       exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
+
+       if (IS_ERR(exynos_ehci->clk)) {
+               dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+               err = PTR_ERR(exynos_ehci->clk);
+               goto fail_clk;
+       }
+
+       err = clk_prepare_enable(exynos_ehci->clk);
+       if (err)
+               goto fail_clk;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "Failed to get I/O memory\n");
+               err = -ENXIO;
+               goto fail_io;
+       }
+
+       hcd->rsrc_start = res->start;
+       hcd->rsrc_len = resource_size(res);
+       hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
+       if (!hcd->regs) {
+               dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+               err = -ENOMEM;
+               goto fail_io;
+       }
+
+       irq = platform_get_irq(pdev, 0);
+       if (!irq) {
+               dev_err(&pdev->dev, "Failed to get IRQ\n");
+               err = -ENODEV;
+               goto fail_io;
+       }
+
+       if (exynos_ehci->otg)
+               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+       if (exynos_ehci->phy)
+               usb_phy_init(exynos_ehci->phy);
+
+       ehci = hcd_to_ehci(hcd);
+       ehci->caps = hcd->regs;
+
+       /* DMA burst Enable */
+       writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+       err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       if (err) {
+               dev_err(&pdev->dev, "Failed to add USB HCD\n");
+               goto fail_add_hcd;
+       }
+
+       platform_set_drvdata(pdev, hcd);
+
+       return 0;
+
+fail_add_hcd:
+       if (exynos_ehci->phy)
+               usb_phy_shutdown(exynos_ehci->phy);
+fail_io:
+       clk_disable_unprepare(exynos_ehci->clk);
+fail_clk:
+       usb_put_hcd(hcd);
+       return err;
+}
+
+static int exynos_ehci_remove(struct platform_device *pdev)
+{
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+       usb_remove_hcd(hcd);
+
+       if (exynos_ehci->otg)
+               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+       if (exynos_ehci->phy)
+               usb_phy_shutdown(exynos_ehci->phy);
+
+       clk_disable_unprepare(exynos_ehci->clk);
+
+       usb_put_hcd(hcd);
+
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos_ehci_suspend(struct device *dev)
+{
+       struct usb_hcd *hcd = dev_get_drvdata(dev);
+       struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+       bool do_wakeup = device_may_wakeup(dev);
+       int rc;
+
+       rc = ehci_suspend(hcd, do_wakeup);
+
+       if (exynos_ehci->otg)
+               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+       if (exynos_ehci->phy)
+               usb_phy_shutdown(exynos_ehci->phy);
+
+       clk_disable_unprepare(exynos_ehci->clk);
+
+       return rc;
+}
+
+static int exynos_ehci_resume(struct device *dev)
+{
+       struct usb_hcd *hcd = dev_get_drvdata(dev);
+       struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+       clk_prepare_enable(exynos_ehci->clk);
+
+       if (exynos_ehci->otg)
+               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
+
+       if (exynos_ehci->phy)
+               usb_phy_init(exynos_ehci->phy);
+
+       /* DMA burst Enable */
+       writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+       ehci_resume(hcd, false);
+       return 0;
+}
+#else
+#define exynos_ehci_suspend    NULL
+#define exynos_ehci_resume     NULL
+#endif
+
+static const struct dev_pm_ops exynos_ehci_pm_ops = {
+       .suspend        = exynos_ehci_suspend,
+       .resume         = exynos_ehci_resume,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_ehci_match[] = {
+       { .compatible = "samsung,exynos4210-ehci" },
+       { .compatible = "samsung,exynos5440-ehci" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, exynos_ehci_match);
+#endif
+
+static struct platform_driver exynos_ehci_driver = {
+       .probe          = exynos_ehci_probe,
+       .remove         = exynos_ehci_remove,
+       .shutdown       = usb_hcd_platform_shutdown,
+       .driver = {
+               .name   = "exynos-ehci",
+               .owner  = THIS_MODULE,
+               .pm     = &exynos_ehci_pm_ops,
+               .of_match_table = of_match_ptr(exynos_ehci_match),
+       }
+};
+static const struct ehci_driver_overrides exynos_overrides __initdata = {
+       .extra_priv_size = sizeof(struct exynos_ehci_hcd),
+};
+
+static int __init ehci_exynos_init(void)
+{
+       if (usb_disabled())
+               return -ENODEV;
+
+       pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+       ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
+       return platform_driver_register(&exynos_ehci_driver);
+}
+module_init(ehci_exynos_init);
+
+static void __exit ehci_exynos_cleanup(void)
+{
+       platform_driver_unregister(&exynos_ehci_driver);
+}
+module_exit(ehci_exynos_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:exynos-ehci");
+MODULE_AUTHOR("Jingoo Han");
+MODULE_AUTHOR("Joonyoung Shim");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
deleted file mode 100644 (file)
index 45e1ad3..0000000
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * SAMSUNG S5P USB HOST EHCI Controller
- *
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Jingoo Han <jg1.han@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
-
-#include "ehci.h"
-
-#define DRIVER_DESC "EHCI s5p driver"
-
-#define EHCI_INSNREG00(base)                   (base + 0x90)
-#define EHCI_INSNREG00_ENA_INCR16              (0x1 << 25)
-#define EHCI_INSNREG00_ENA_INCR8               (0x1 << 24)
-#define EHCI_INSNREG00_ENA_INCR4               (0x1 << 23)
-#define EHCI_INSNREG00_ENA_INCRX_ALIGN         (0x1 << 22)
-#define EHCI_INSNREG00_ENABLE_DMA_BURST        \
-       (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
-        EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
-
-static const char hcd_name[] = "ehci-s5p";
-static struct hc_driver __read_mostly s5p_ehci_hc_driver;
-
-struct s5p_ehci_hcd {
-       struct clk *clk;
-       struct usb_phy *phy;
-       struct usb_otg *otg;
-};
-
-#define to_s5p_ehci(hcd)      (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
-
-static void s5p_setup_vbus_gpio(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       int err;
-       int gpio;
-
-       if (!dev->of_node)
-               return;
-
-       gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
-       if (!gpio_is_valid(gpio))
-               return;
-
-       err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
-                                   "ehci_vbus_gpio");
-       if (err)
-               dev_err(dev, "can't request ehci vbus gpio %d", gpio);
-}
-
-static int s5p_ehci_probe(struct platform_device *pdev)
-{
-       struct s5p_ehci_hcd *s5p_ehci;
-       struct usb_hcd *hcd;
-       struct ehci_hcd *ehci;
-       struct resource *res;
-       struct usb_phy *phy;
-       int irq;
-       int err;
-
-       /*
-        * Right now device-tree probed devices don't get dma_mask set.
-        * Since shared usb code relies on it, set it here for now.
-        * Once we move to full device tree support this will vanish off.
-        */
-       if (!pdev->dev.dma_mask)
-               pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-       if (!pdev->dev.coherent_dma_mask)
-               pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-       s5p_setup_vbus_gpio(pdev);
-
-       hcd = usb_create_hcd(&s5p_ehci_hc_driver,
-                            &pdev->dev, dev_name(&pdev->dev));
-       if (!hcd) {
-               dev_err(&pdev->dev, "Unable to create HCD\n");
-               return -ENOMEM;
-       }
-       s5p_ehci = to_s5p_ehci(hcd);
-
-       if (of_device_is_compatible(pdev->dev.of_node,
-                                       "samsung,exynos5440-ehci"))
-               goto skip_phy;
-
-       phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-       if (IS_ERR(phy)) {
-               usb_put_hcd(hcd);
-               dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
-               return -EPROBE_DEFER;
-       } else {
-               s5p_ehci->phy = phy;
-               s5p_ehci->otg = phy->otg;
-       }
-
-skip_phy:
-
-       s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
-
-       if (IS_ERR(s5p_ehci->clk)) {
-               dev_err(&pdev->dev, "Failed to get usbhost clock\n");
-               err = PTR_ERR(s5p_ehci->clk);
-               goto fail_clk;
-       }
-
-       err = clk_prepare_enable(s5p_ehci->clk);
-       if (err)
-               goto fail_clk;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "Failed to get I/O memory\n");
-               err = -ENXIO;
-               goto fail_io;
-       }
-
-       hcd->rsrc_start = res->start;
-       hcd->rsrc_len = resource_size(res);
-       hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
-       if (!hcd->regs) {
-               dev_err(&pdev->dev, "Failed to remap I/O memory\n");
-               err = -ENOMEM;
-               goto fail_io;
-       }
-
-       irq = platform_get_irq(pdev, 0);
-       if (!irq) {
-               dev_err(&pdev->dev, "Failed to get IRQ\n");
-               err = -ENODEV;
-               goto fail_io;
-       }
-
-       if (s5p_ehci->otg)
-               s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-       if (s5p_ehci->phy)
-               usb_phy_init(s5p_ehci->phy);
-
-       ehci = hcd_to_ehci(hcd);
-       ehci->caps = hcd->regs;
-
-       /* DMA burst Enable */
-       writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
-
-       err = usb_add_hcd(hcd, irq, IRQF_SHARED);
-       if (err) {
-               dev_err(&pdev->dev, "Failed to add USB HCD\n");
-               goto fail_add_hcd;
-       }
-
-       platform_set_drvdata(pdev, hcd);
-
-       return 0;
-
-fail_add_hcd:
-       if (s5p_ehci->phy)
-               usb_phy_shutdown(s5p_ehci->phy);
-fail_io:
-       clk_disable_unprepare(s5p_ehci->clk);
-fail_clk:
-       usb_put_hcd(hcd);
-       return err;
-}
-
-static int s5p_ehci_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-       struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-
-       usb_remove_hcd(hcd);
-
-       if (s5p_ehci->otg)
-               s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-       if (s5p_ehci->phy)
-               usb_phy_shutdown(s5p_ehci->phy);
-
-       clk_disable_unprepare(s5p_ehci->clk);
-
-       usb_put_hcd(hcd);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-static int s5p_ehci_suspend(struct device *dev)
-{
-       struct usb_hcd *hcd = dev_get_drvdata(dev);
-       struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-
-       bool do_wakeup = device_may_wakeup(dev);
-       int rc;
-
-       rc = ehci_suspend(hcd, do_wakeup);
-
-       if (s5p_ehci->otg)
-               s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-       if (s5p_ehci->phy)
-               usb_phy_shutdown(s5p_ehci->phy);
-
-       clk_disable_unprepare(s5p_ehci->clk);
-
-       return rc;
-}
-
-static int s5p_ehci_resume(struct device *dev)
-{
-       struct usb_hcd *hcd = dev_get_drvdata(dev);
-       struct  s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd);
-
-       clk_prepare_enable(s5p_ehci->clk);
-
-       if (s5p_ehci->otg)
-               s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
-
-       if (s5p_ehci->phy)
-               usb_phy_init(s5p_ehci->phy);
-
-       /* DMA burst Enable */
-       writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
-
-       ehci_resume(hcd, false);
-       return 0;
-}
-#else
-#define s5p_ehci_suspend       NULL
-#define s5p_ehci_resume                NULL
-#endif
-
-static const struct dev_pm_ops s5p_ehci_pm_ops = {
-       .suspend        = s5p_ehci_suspend,
-       .resume         = s5p_ehci_resume,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id exynos_ehci_match[] = {
-       { .compatible = "samsung,exynos4210-ehci" },
-       { .compatible = "samsung,exynos5440-ehci" },
-       {},
-};
-MODULE_DEVICE_TABLE(of, exynos_ehci_match);
-#endif
-
-static struct platform_driver s5p_ehci_driver = {
-       .probe          = s5p_ehci_probe,
-       .remove         = s5p_ehci_remove,
-       .shutdown       = usb_hcd_platform_shutdown,
-       .driver = {
-               .name   = "s5p-ehci",
-               .owner  = THIS_MODULE,
-               .pm     = &s5p_ehci_pm_ops,
-               .of_match_table = of_match_ptr(exynos_ehci_match),
-       }
-};
-static const struct ehci_driver_overrides s5p_overrides __initdata = {
-       .extra_priv_size = sizeof(struct s5p_ehci_hcd),
-};
-
-static int __init ehci_s5p_init(void)
-{
-       if (usb_disabled())
-               return -ENODEV;
-
-       pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-       ehci_init_driver(&s5p_ehci_hc_driver, &s5p_overrides);
-       return platform_driver_register(&s5p_ehci_driver);
-}
-module_init(ehci_s5p_init);
-
-static void __exit ehci_s5p_cleanup(void)
-{
-       platform_driver_unregister(&s5p_ehci_driver);
-}
-module_exit(ehci_s5p_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:s5p-ehci");
-MODULE_AUTHOR("Jingoo Han");
-MODULE_AUTHOR("Joonyoung Shim");
-MODULE_LICENSE("GPL v2");
This page took 0.031695 seconds and 5 git commands to generate.