--- /dev/null
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpio-fan,speed-map =
+ <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+ };
+};
+
+&pinctrl {
+ pmx_fan_low: pmx-fan-low {
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_switch>;
+ pinctrl-names = "default";
+
+ power-on-switch {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ };
+
+ power-auto-switch {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+ pinctrl-names = "default";
+
+ blue-power-led {
+ label = "linkstation:blue:power";
+ default-state = "keep";
+ };
+
+ red-alarm-led {
+ label = "linkstation:red:alarm";
+ };
+
+ amber-info-led {
+ label = "linkstation:amber:info";
+ };
+ };
+};
+
+&pinctrl {
+ pmx_power_switch: pmx-power-switch {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_power: pmx-leds {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_alarm: pmx-leds {
+ marvell,function = "gpio";
+ };
+
+ pmx_led_info: pmx-leds {
+ marvell,function = "gpio";
+ };
+};
/dts-v1/;
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5182.dtsi"
/ {
model = "Buffalo Linkstation LS-WTGL";
reg = <0x00000000 0x4000000>;
};
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- linux,stdout-path = &uart0;
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
- <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
- <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-
- internal-regs {
- pinctrl: pinctrl@10000 {
- pinctrl-names = "default";
-
- pmx_led_power: pmx-leds {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
-
- pmx_led_alarm: pmx-leds {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_led_info: pmx-leds {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_power_hdd: pmx-power-hdd {
- marvell,pins = "mpp1";
- marvell,function = "gpio";
- };
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp12";
- marvell,function = "sata0";
- };
-
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp13";
- marvell,function = "sata1";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- pmx_power_switch: pmx-power-switch {
- marvell,pins = "mpp8", "mpp10";
- marvell,function = "gpio";
- };
- };
- };
- };
-
gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_switch>;
- pinctrl-names = "default";
-
- button@1 {
- label = "Power-on Switch";
- linux,code = <KEY_RESERVED>;
- linux,input-type = <5>;
+ power-on-switch {
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- button@2 {
- label = "Power-auto Switch";
- linux,code = <KEY_ESC>;
- linux,input-type = <5>;
+ power-auto-switch {
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_power &pmx_led_alarm
- &pmx_led_info>;
- pinctrl-names = "default";
-
- led@1 {
- label = "lswtgl:blue:power";
+ blue-power-led {
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- default-state = "keep";
};
- led@2 {
- label = "lswtgl:red:alarm";
+ red-alarm-led {
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
- led@3 {
- label = "lswtgl:amber:info";
+ amber-info-led {
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
gpio_fan {
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
- pinctrl-names = "default";
-
gpios = <&gpio0 14 GPIO_ACTIVE_LOW
&gpio0 17 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
-
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+};
- restart_poweroff {
- compatible = "restart-poweroff";
+&pinctrl {
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- hdd_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
};
-};
-
-&devbus_bootcs {
- status = "okay";
- devbus,keep-config;
- flash@0 {
- compatible = "jedec-flash";
- reg = <0 0x40000>;
- bank-width = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- header@0 {
- reg = <0 0x30000>;
- read-only;
- };
-
- uboot@30000 {
- reg = <0x30000 0xF000>;
- read-only;
- };
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
- uboot_env@3F000 {
- reg = <0x3F000 0x1000>;
- };
- };
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
};
-};
-&mdio {
- status = "okay";
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
- ethphy: ethernet-phy {
- reg = <8>;
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp8", "mpp10";
+ marvell,function = "gpio";
};
-};
-ð {
- status = "okay";
+ pmx_power_usb: pmx-power-usb {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
- ethernet-port@0 {
- phy-handle = <ðphy>;
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
};
-};
-&ehci0 {
- status = "okay";
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
};
-&i2c {
- status = "okay";
-
- rtc {
- compatible = "ricoh,rs5c372a";
- reg = <0x32>;
- };
+&hdd_power {
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
-&wdt {
- status = "disabled";
+&usb_power {
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
&sata {
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- status = "okay";
nr-ports = <2>;
};
-
-&uart0 {
- status = "okay";
-};
--- /dev/null
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ hdd_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&pinctrl {
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,function = "gpio";
+ };
+
+ pmx_power_usb: pmx-power-usb {
+ marvell,function = "gpio";
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+ devbus,keep-config;
+
+ flash@0 {
+ compatible = "jedec-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ header@0 {
+ reg = <0 0x30000>;
+ read-only;
+ };
+
+ uboot@30000 {
+ reg = <0x30000 0xF000>;
+ read-only;
+ };
+
+ uboot_env@3F000 {
+ reg = <0x3F000 0x1000>;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ rtc {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+};
+
+&wdt {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <1>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
projects / deliverable / linux.git / commitdiff
