+++ /dev/null
-/* arch/arm/include/asm/hardware/pl080.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ARM PrimeCell PL080 DMA controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, there are some Samsung updates to this controller block which
- * make it not entierly compatible with the PL080 specification from
- * ARM. When in doubt, check the Samsung documentation first.
- *
- * The Samsung defines are PL080S, and add an extra control register,
- * the ability to move more than 2^11 counts of data and some extra
- * OneNAND features.
-*/
-
-#ifndef ASM_PL080_H
-#define ASM_PL080_H
-
-#define PL080_INT_STATUS (0x00)
-#define PL080_TC_STATUS (0x04)
-#define PL080_TC_CLEAR (0x08)
-#define PL080_ERR_STATUS (0x0C)
-#define PL080_ERR_CLEAR (0x10)
-#define PL080_RAW_TC_STATUS (0x14)
-#define PL080_RAW_ERR_STATUS (0x18)
-#define PL080_EN_CHAN (0x1c)
-#define PL080_SOFT_BREQ (0x20)
-#define PL080_SOFT_SREQ (0x24)
-#define PL080_SOFT_LBREQ (0x28)
-#define PL080_SOFT_LSREQ (0x2C)
-
-#define PL080_CONFIG (0x30)
-#define PL080_CONFIG_M2_BE (1 << 2)
-#define PL080_CONFIG_M1_BE (1 << 1)
-#define PL080_CONFIG_ENABLE (1 << 0)
-
-#define PL080_SYNC (0x34)
-
-/* Per channel configuration registers */
-
-#define PL080_Cx_STRIDE (0x20)
-#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
-
-#define PL080_CH_SRC_ADDR (0x00)
-#define PL080_CH_DST_ADDR (0x04)
-#define PL080_CH_LLI (0x08)
-#define PL080_CH_CONTROL (0x0C)
-#define PL080_CH_CONFIG (0x10)
-#define PL080S_CH_CONTROL2 (0x10)
-#define PL080S_CH_CONFIG (0x14)
-
-#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
-#define PL080_LLI_ADDR_SHIFT (2)
-#define PL080_LLI_LM_AHB2 (1 << 0)
-
-#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
-#define PL080_CONTROL_PROT_MASK (0x7 << 28)
-#define PL080_CONTROL_PROT_SHIFT (28)
-#define PL080_CONTROL_PROT_CACHE (1 << 30)
-#define PL080_CONTROL_PROT_BUFF (1 << 29)
-#define PL080_CONTROL_PROT_SYS (1 << 28)
-#define PL080_CONTROL_DST_INCR (1 << 27)
-#define PL080_CONTROL_SRC_INCR (1 << 26)
-#define PL080_CONTROL_DST_AHB2 (1 << 25)
-#define PL080_CONTROL_SRC_AHB2 (1 << 24)
-#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
-#define PL080_CONTROL_DWIDTH_SHIFT (21)
-#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
-#define PL080_CONTROL_SWIDTH_SHIFT (18)
-#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
-#define PL080_CONTROL_DB_SIZE_SHIFT (15)
-#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
-#define PL080_CONTROL_SB_SIZE_SHIFT (12)
-#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
-#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
-
-#define PL080_BSIZE_1 (0x0)
-#define PL080_BSIZE_4 (0x1)
-#define PL080_BSIZE_8 (0x2)
-#define PL080_BSIZE_16 (0x3)
-#define PL080_BSIZE_32 (0x4)
-#define PL080_BSIZE_64 (0x5)
-#define PL080_BSIZE_128 (0x6)
-#define PL080_BSIZE_256 (0x7)
-
-#define PL080_WIDTH_8BIT (0x0)
-#define PL080_WIDTH_16BIT (0x1)
-#define PL080_WIDTH_32BIT (0x2)
-
-#define PL080N_CONFIG_ITPROT (1 << 20)
-#define PL080N_CONFIG_SECPROT (1 << 19)
-#define PL080_CONFIG_HALT (1 << 18)
-#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
-#define PL080_CONFIG_LOCK (1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
-#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
-#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
-#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
-#define PL080_CONFIG_DST_SEL_SHIFT (6)
-#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
-#define PL080_CONFIG_SRC_SEL_SHIFT (1)
-#define PL080_CONFIG_ENABLE (1 << 0)
-
-#define PL080_FLOW_MEM2MEM (0x0)
-#define PL080_FLOW_MEM2PER (0x1)
-#define PL080_FLOW_PER2MEM (0x2)
-#define PL080_FLOW_SRC2DST (0x3)
-#define PL080_FLOW_SRC2DST_DST (0x4)
-#define PL080_FLOW_MEM2PER_PER (0x5)
-#define PL080_FLOW_PER2MEM_PER (0x6)
-#define PL080_FLOW_SRC2DST_SRC (0x7)
-
-/* DMA linked list chain structure */
-
-struct pl080_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
-};
-
-struct pl080s_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
- u32 control1;
-};
-
-#endif /* ASM_PL080_H */
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/amba/pl080.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/regs-sys.h>
-#include <asm/hardware/pl080.h>
/* dma channel state information */
#include <linux/irqchip/spear-shirq.h>
#include <linux/of_irq.h>
#include <linux/io.h>
-#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
#include <plat/pl080.h>
#include <mach/generic.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <asm/hardware/pl080.h>
+#include <linux/amba/pl080.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <asm/hardware/pl080.h>
+#include <linux/amba/pl080.h>
#include "dmaengine.h"
#include "virt-dma.h"
--- /dev/null
+/* include/linux/amba/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra control register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
+#define PL080_INT_STATUS (0x00)
+#define PL080_TC_STATUS (0x04)
+#define PL080_TC_CLEAR (0x08)
+#define PL080_ERR_STATUS (0x0C)
+#define PL080_ERR_CLEAR (0x10)
+#define PL080_RAW_TC_STATUS (0x14)
+#define PL080_RAW_ERR_STATUS (0x18)
+#define PL080_EN_CHAN (0x1c)
+#define PL080_SOFT_BREQ (0x20)
+#define PL080_SOFT_SREQ (0x24)
+#define PL080_SOFT_LBREQ (0x28)
+#define PL080_SOFT_LSREQ (0x2C)
+
+#define PL080_CONFIG (0x30)
+#define PL080_CONFIG_M2_BE (1 << 2)
+#define PL080_CONFIG_M1_BE (1 << 1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_SYNC (0x34)
+
+/* Per channel configuration registers */
+
+#define PL080_Cx_STRIDE (0x20)
+#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR (0x00)
+#define PL080_CH_DST_ADDR (0x04)
+#define PL080_CH_LLI (0x08)
+#define PL080_CH_CONTROL (0x0C)
+#define PL080_CH_CONFIG (0x10)
+#define PL080S_CH_CONTROL2 (0x10)
+#define PL080S_CH_CONFIG (0x14)
+
+#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT (2)
+#define PL080_LLI_LM_AHB2 (1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_PROT_MASK (0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_CACHE (1 << 30)
+#define PL080_CONTROL_PROT_BUFF (1 << 29)
+#define PL080_CONTROL_PROT_SYS (1 << 28)
+#define PL080_CONTROL_DST_INCR (1 << 27)
+#define PL080_CONTROL_SRC_INCR (1 << 26)
+#define PL080_CONTROL_DST_AHB2 (1 << 25)
+#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT (21)
+#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT (18)
+#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT (15)
+#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT (12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
+
+#define PL080_BSIZE_1 (0x0)
+#define PL080_BSIZE_4 (0x1)
+#define PL080_BSIZE_8 (0x2)
+#define PL080_BSIZE_16 (0x3)
+#define PL080_BSIZE_32 (0x4)
+#define PL080_BSIZE_64 (0x5)
+#define PL080_BSIZE_128 (0x6)
+#define PL080_BSIZE_256 (0x7)
+
+#define PL080_WIDTH_8BIT (0x0)
+#define PL080_WIDTH_16BIT (0x1)
+#define PL080_WIDTH_32BIT (0x2)
+
+#define PL080N_CONFIG_ITPROT (1 << 20)
+#define PL080N_CONFIG_SECPROT (1 << 19)
+#define PL080_CONFIG_HALT (1 << 18)
+#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
+#define PL080_CONFIG_LOCK (1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
+#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT (6)
+#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT (1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_FLOW_MEM2MEM (0x0)
+#define PL080_FLOW_MEM2PER (0x1)
+#define PL080_FLOW_PER2MEM (0x2)
+#define PL080_FLOW_SRC2DST (0x3)
+#define PL080_FLOW_SRC2DST_DST (0x4)
+#define PL080_FLOW_MEM2PER_PER (0x5)
+#define PL080_FLOW_PER2MEM_PER (0x6)
+#define PL080_FLOW_SRC2DST_SRC (0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+};
+
+struct pl080s_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+ u32 control1;
+};
+
+#endif /* ASM_PL080_H */
projects / deliverable / linux.git / commitdiff
