#include "ap_bus.h"
-/* Some prototypes. */
-static void ap_scan_bus(struct work_struct *);
-static void ap_poll_all(unsigned long);
-static void ap_request_timeout(unsigned long);
-static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
-static int ap_device_remove(struct device *dev);
-static int ap_device_probe(struct device *dev);
-static void ap_interrupt_handler(struct airq_struct *airq);
-static void ap_reset(struct ap_device *ap_dev, unsigned long *flags);
-static int ap_select_domain(void);
-
/*
* Module description.
*/
static struct workqueue_struct *ap_work_queue;
static struct timer_list ap_config_timer;
static int ap_config_time = AP_CONFIG_TIME;
+static void ap_scan_bus(struct work_struct *);
static DECLARE_WORK(ap_config_work, ap_scan_bus);
/*
* Tasklet & timer for AP request polling and interrupts
*/
-static DECLARE_TASKLET(ap_tasklet, ap_poll_all, 0);
+static void ap_tasklet_fn(unsigned long);
+static DECLARE_TASKLET(ap_tasklet, ap_tasklet_fn, 0);
static atomic_t ap_poll_requests = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread = NULL;
static struct bus_type ap_bus_type;
/* Adapter interrupt definitions */
+static void ap_interrupt_handler(struct airq_struct *airq);
+
static int ap_airq_flag;
static struct airq_struct ap_airq = {
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_INVALID_ADDRESS:
- return -ENODEV;
+ pr_err("Registering adapter interrupts for AP %d failed\n",
+ AP_QID_DEVICE(ap_dev->qid));
+ return -EOPNOTSUPP;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
default:
}
EXPORT_SYMBOL(ap_recv);
-/**
- * __ap_schedule_poll_timer(): Schedule poll timer.
- *
- * Set up the timer to run the poll tasklet
- */
-static inline void __ap_schedule_poll_timer(void)
-{
- ktime_t hr_time;
-
- spin_lock_bh(&ap_poll_timer_lock);
- if (!hrtimer_is_queued(&ap_poll_timer) && !ap_suspend_flag) {
- hr_time = ktime_set(0, poll_timeout);
- hrtimer_forward_now(&ap_poll_timer, hr_time);
- hrtimer_restart(&ap_poll_timer);
- }
- spin_unlock_bh(&ap_poll_timer_lock);
-}
-
-/**
- * ap_schedule_poll_timer(): Schedule poll timer.
- *
- * Set up the timer to run the poll tasklet
- */
-static inline void ap_schedule_poll_timer(void)
-{
- if (ap_using_interrupts())
- return;
- __ap_schedule_poll_timer();
-}
-
-
/**
* ap_query_queue(): Check if an AP queue is available.
* @qid: The AP queue number
}
}
+/* State machine definitions and helpers */
+
+static void ap_sm_wait(enum ap_wait wait)
+{
+ ktime_t hr_time;
+
+ switch (wait) {
+ case AP_WAIT_AGAIN:
+ case AP_WAIT_INTERRUPT:
+ if (ap_using_interrupts())
+ break;
+ if (ap_poll_kthread) {
+ wake_up(&ap_poll_wait);
+ break;
+ }
+ /* Fall through */
+ case AP_WAIT_TIMEOUT:
+ spin_lock_bh(&ap_poll_timer_lock);
+ if (!hrtimer_is_queued(&ap_poll_timer)) {
+ hr_time = ktime_set(0, poll_timeout);
+ hrtimer_forward_now(&ap_poll_timer, hr_time);
+ hrtimer_restart(&ap_poll_timer);
+ }
+ spin_unlock_bh(&ap_poll_timer_lock);
+ break;
+ case AP_WAIT_NONE:
+ default:
+ break;
+ }
+}
+
+static enum ap_wait ap_sm_nop(struct ap_device *ap_dev)
+{
+ return AP_WAIT_NONE;
+}
+
+/**
+ * ap_sm_recv(): Receive pending reply messages from an AP device but do
+ * not change the state of the device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static struct ap_queue_status ap_sm_recv(struct ap_device *ap_dev)
+{
+ struct ap_queue_status status;
+ struct ap_message *ap_msg;
+
+ status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
+ ap_dev->reply->message, ap_dev->reply->length);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ atomic_dec(&ap_poll_requests);
+ ap_dev->queue_count--;
+ if (ap_dev->queue_count > 0)
+ mod_timer(&ap_dev->timeout,
+ jiffies + ap_dev->drv->request_timeout);
+ list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
+ if (ap_msg->psmid != ap_dev->reply->psmid)
+ continue;
+ list_del_init(&ap_msg->list);
+ ap_dev->pendingq_count--;
+ ap_msg->receive(ap_dev, ap_msg, ap_dev->reply);
+ break;
+ }
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (!status.queue_empty || ap_dev->queue_count <= 0)
+ break;
+ /* The card shouldn't forget requests but who knows. */
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ ap_dev->queue_count = 0;
+ list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
+ ap_dev->requestq_count += ap_dev->pendingq_count;
+ ap_dev->pendingq_count = 0;
+ break;
+ default:
+ break;
+ }
+ return status;
+}
+
+/**
+ * ap_sm_read(): Receive pending reply messages from an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static enum ap_wait ap_sm_read(struct ap_device *ap_dev)
+{
+ struct ap_queue_status status;
+
+ status = ap_sm_recv(ap_dev);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_AGAIN;
+ ap_dev->state = AP_STATE_IDLE;
+ return AP_WAIT_NONE;
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_INTERRUPT;
+ ap_dev->state = AP_STATE_IDLE;
+ return AP_WAIT_NONE;
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
+ }
+}
+
+/**
+ * ap_sm_write(): Send messages from the request queue to an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static enum ap_wait ap_sm_write(struct ap_device *ap_dev)
+{
+ struct ap_queue_status status;
+ struct ap_message *ap_msg;
+
+ if (ap_dev->requestq_count <= 0)
+ return AP_WAIT_NONE;
+ /* Start the next request on the queue. */
+ ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
+ status = __ap_send(ap_dev->qid, ap_msg->psmid,
+ ap_msg->message, ap_msg->length, ap_msg->special);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ atomic_inc(&ap_poll_requests);
+ ap_dev->queue_count++;
+ if (ap_dev->queue_count == 1)
+ mod_timer(&ap_dev->timeout,
+ jiffies + ap_dev->drv->request_timeout);
+ list_move_tail(&ap_msg->list, &ap_dev->pendingq);
+ ap_dev->requestq_count--;
+ ap_dev->pendingq_count++;
+ if (ap_dev->queue_count < ap_dev->queue_depth) {
+ ap_dev->state = AP_STATE_WORKING;
+ return AP_WAIT_AGAIN;
+ }
+ /* fall through */
+ case AP_RESPONSE_Q_FULL:
+ ap_dev->state = AP_STATE_QUEUE_FULL;
+ return AP_WAIT_INTERRUPT;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ ap_dev->state = AP_STATE_RESET_WAIT;
+ return AP_WAIT_TIMEOUT;
+ case AP_RESPONSE_MESSAGE_TOO_BIG:
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ list_del_init(&ap_msg->list);
+ ap_dev->requestq_count--;
+ ap_msg->rc = -EINVAL;
+ ap_msg->receive(ap_dev, ap_msg, NULL);
+ return AP_WAIT_AGAIN;
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
+ }
+}
+
/**
- * ap_init_queue(): Reset an AP queue.
+ * ap_sm_read_write(): Send and receive messages to/from an AP device.
+ * @ap_dev: pointer to the AP device
+ *
+ * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
+ */
+static enum ap_wait ap_sm_read_write(struct ap_device *ap_dev)
+{
+ return min(ap_sm_read(ap_dev), ap_sm_write(ap_dev));
+}
+
+/**
+ * ap_sm_reset(): Reset an AP queue.
* @qid: The AP queue number
*
* Submit the Reset command to an AP queue.
- * Since the reset is asynchron set the state to 'RESET_IN_PROGRESS'
- * and check later via ap_poll_queue() if the reset is done.
*/
-static int ap_init_queue(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_reset(struct ap_device *ap_dev)
{
struct ap_queue_status status;
status = ap_reset_queue(ap_dev->qid);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
- ap_dev->interrupt = AP_INTR_DISABLED;
- ap_dev->reset = AP_RESET_IN_PROGRESS;
- return 0;
case AP_RESPONSE_RESET_IN_PROGRESS:
+ ap_dev->state = AP_STATE_RESET_WAIT;
+ ap_dev->interrupt = AP_INTR_DISABLED;
+ return AP_WAIT_TIMEOUT;
case AP_RESPONSE_BUSY:
- return -EBUSY;
+ return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
- return -ENODEV;
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
}
}
/**
- * ap_increase_queue_count(): Arm request timeout.
- * @ap_dev: Pointer to an AP device.
+ * ap_sm_reset_wait(): Test queue for completion of the reset operation
+ * @ap_dev: pointer to the AP device
*
- * Arm request timeout if an AP device was idle and a new request is submitted.
+ * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
-static void ap_increase_queue_count(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_reset_wait(struct ap_device *ap_dev)
{
- int timeout = ap_dev->drv->request_timeout;
+ struct ap_queue_status status;
+ unsigned long info;
- ap_dev->queue_count++;
- if (ap_dev->queue_count == 1) {
- mod_timer(&ap_dev->timeout, jiffies + timeout);
- ap_dev->reset = AP_RESET_ARMED;
+ if (ap_dev->queue_count > 0)
+ /* Try to read a completed message and get the status */
+ status = ap_sm_recv(ap_dev);
+ else
+ /* Get the status with TAPQ */
+ status = ap_test_queue(ap_dev->qid, &info);
+
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_using_interrupts() &&
+ ap_queue_enable_interruption(ap_dev,
+ ap_airq.lsi_ptr) == 0)
+ ap_dev->state = AP_STATE_SETIRQ_WAIT;
+ else
+ ap_dev->state = (ap_dev->queue_count > 0) ?
+ AP_STATE_WORKING : AP_STATE_IDLE;
+ return AP_WAIT_AGAIN;
+ case AP_RESPONSE_BUSY:
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ return AP_WAIT_TIMEOUT;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
}
}
/**
- * ap_decrease_queue_count(): Decrease queue count.
- * @ap_dev: Pointer to an AP device.
+ * ap_sm_setirq_wait(): Test queue for completion of the irq enablement
+ * @ap_dev: pointer to the AP device
*
- * If AP device is still alive, re-schedule request timeout if there are still
- * pending requests.
+ * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
-static void ap_decrease_queue_count(struct ap_device *ap_dev)
+static enum ap_wait ap_sm_setirq_wait(struct ap_device *ap_dev)
{
- int timeout = ap_dev->drv->request_timeout;
+ struct ap_queue_status status;
+ unsigned long info;
- ap_dev->queue_count--;
if (ap_dev->queue_count > 0)
- mod_timer(&ap_dev->timeout, jiffies + timeout);
+ /* Try to read a completed message and get the status */
+ status = ap_sm_recv(ap_dev);
else
- /*
- * The timeout timer should to be disabled now - since
- * del_timer_sync() is very expensive, we just tell via the
- * reset flag to ignore the pending timeout timer.
- */
- ap_dev->reset = AP_RESET_IGNORE;
+ /* Get the status with TAPQ */
+ status = ap_test_queue(ap_dev->qid, &info);
+
+ if (status.int_enabled == 1) {
+ /* Irqs are now enabled */
+ ap_dev->interrupt = AP_INTR_ENABLED;
+ ap_dev->state = (ap_dev->queue_count > 0) ?
+ AP_STATE_WORKING : AP_STATE_IDLE;
+ }
+
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (ap_dev->queue_count > 0)
+ return AP_WAIT_AGAIN;
+ /* fallthrough */
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ return AP_WAIT_TIMEOUT;
+ default:
+ ap_dev->state = AP_STATE_BORKED;
+ return AP_WAIT_NONE;
+ }
+}
+
+/*
+ * AP state machine jump table
+ */
+ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
+ [AP_STATE_RESET_START] = {
+ [AP_EVENT_POLL] = ap_sm_reset,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_RESET_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_reset_wait,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_SETIRQ_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_setirq_wait,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_IDLE] = {
+ [AP_EVENT_POLL] = ap_sm_write,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_WORKING] = {
+ [AP_EVENT_POLL] = ap_sm_read_write,
+ [AP_EVENT_TIMEOUT] = ap_sm_reset,
+ },
+ [AP_STATE_QUEUE_FULL] = {
+ [AP_EVENT_POLL] = ap_sm_read,
+ [AP_EVENT_TIMEOUT] = ap_sm_reset,
+ },
+ [AP_STATE_SUSPEND_WAIT] = {
+ [AP_EVENT_POLL] = ap_sm_read,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+ [AP_STATE_BORKED] = {
+ [AP_EVENT_POLL] = ap_sm_nop,
+ [AP_EVENT_TIMEOUT] = ap_sm_nop,
+ },
+};
+
+static inline enum ap_wait ap_sm_event(struct ap_device *ap_dev,
+ enum ap_event event)
+{
+ return ap_jumptable[ap_dev->state][event](ap_dev);
+}
+
+static inline enum ap_wait ap_sm_event_loop(struct ap_device *ap_dev,
+ enum ap_event event)
+{
+ enum ap_wait wait;
+
+ while ((wait = ap_sm_event(ap_dev, event)) == AP_WAIT_AGAIN)
+ ;
+ return wait;
+}
+
+/**
+ * ap_request_timeout(): Handling of request timeouts
+ * @data: Holds the AP device.
+ *
+ * Handles request timeouts.
+ */
+static void ap_request_timeout(unsigned long data)
+{
+ struct ap_device *ap_dev = (struct ap_device *) data;
+
+ if (ap_suspend_flag)
+ return;
+ spin_lock_bh(&ap_dev->lock);
+ ap_sm_wait(ap_sm_event(ap_dev, AP_EVENT_TIMEOUT));
+ spin_unlock_bh(&ap_dev->lock);
+}
+
+/**
+ * ap_poll_timeout(): AP receive polling for finished AP requests.
+ * @unused: Unused pointer.
+ *
+ * Schedules the AP tasklet using a high resolution timer.
+ */
+static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
+{
+ if (!ap_suspend_flag)
+ tasklet_schedule(&ap_tasklet);
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ap_interrupt_handler() - Schedule ap_tasklet on interrupt
+ * @airq: pointer to adapter interrupt descriptor
+ */
+static void ap_interrupt_handler(struct airq_struct *airq)
+{
+ inc_irq_stat(IRQIO_APB);
+ if (!ap_suspend_flag)
+ tasklet_schedule(&ap_tasklet);
+}
+
+/**
+ * ap_tasklet_fn(): Tasklet to poll all AP devices.
+ * @dummy: Unused variable
+ *
+ * Poll all AP devices on the bus.
+ */
+static void ap_tasklet_fn(unsigned long dummy)
+{
+ struct ap_device *ap_dev;
+ enum ap_wait wait = AP_WAIT_NONE;
+
+ /* Reset the indicator if interrupts are used. Thus new interrupts can
+ * be received. Doing it in the beginning of the tasklet is therefor
+ * important that no requests on any AP get lost.
+ */
+ if (ap_using_interrupts())
+ xchg(ap_airq.lsi_ptr, 0);
+
+ spin_lock(&ap_device_list_lock);
+ list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock_bh(&ap_dev->lock);
+ wait = min(wait, ap_sm_event_loop(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+ }
+ spin_unlock(&ap_device_list_lock);
+ ap_sm_wait(wait);
}
/**
static int ap_poll_thread(void *data)
{
DECLARE_WAITQUEUE(wait, current);
- unsigned long flags;
- struct ap_device *ap_dev;
set_user_nice(current, MAX_NICE);
set_freezable();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&ap_poll_wait, &wait);
-
if (need_resched()) {
schedule();
try_to_freeze();
continue;
}
-
- flags = 0;
- spin_lock_bh(&ap_device_list_lock);
- list_for_each_entry(ap_dev, &ap_device_list, list) {
- spin_lock(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock(&ap_dev->lock);
- }
- spin_unlock_bh(&ap_device_list_lock);
+ ap_tasklet_fn(0);
} while (!kthread_should_stop());
return 0;
}
mutex_unlock(&ap_poll_thread_mutex);
}
+/**
+ * ap_queue_message(): Queue a request to an AP device.
+ * @ap_dev: The AP device to queue the message to
+ * @ap_msg: The message that is to be added
+ */
+void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ /* For asynchronous message handling a valid receive-callback
+ * is required. */
+ BUG_ON(!ap_msg->receive);
+
+ spin_lock_bh(&ap_dev->lock);
+ /* Queue the message. */
+ list_add_tail(&ap_msg->list, &ap_dev->requestq);
+ ap_dev->requestq_count++;
+ ap_dev->total_request_count++;
+ /* Send/receive as many request from the queue as possible. */
+ ap_sm_wait(ap_sm_event_loop(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_queue_message);
+
+/**
+ * ap_cancel_message(): Cancel a crypto request.
+ * @ap_dev: The AP device that has the message queued
+ * @ap_msg: The message that is to be removed
+ *
+ * Cancel a crypto request. This is done by removing the request
+ * from the device pending or request queue. Note that the
+ * request stays on the AP queue. When it finishes the message
+ * reply will be discarded because the psmid can't be found.
+ */
+void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ struct ap_message *tmp;
+
+ spin_lock_bh(&ap_dev->lock);
+ if (!list_empty(&ap_msg->list)) {
+ list_for_each_entry(tmp, &ap_dev->pendingq, list)
+ if (tmp->psmid == ap_msg->psmid) {
+ ap_dev->pendingq_count--;
+ goto found;
+ }
+ ap_dev->requestq_count--;
+found:
+ list_del_init(&ap_msg->list);
+ }
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_cancel_message);
+
/*
* AP device related attributes.
*/
int rc = 0;
spin_lock_bh(&ap_dev->lock);
- switch (ap_dev->reset) {
- case AP_RESET_IGNORE:
- rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
+ switch (ap_dev->state) {
+ case AP_STATE_RESET_START:
+ case AP_STATE_RESET_WAIT:
+ rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
break;
- case AP_RESET_ARMED:
+ case AP_STATE_WORKING:
+ case AP_STATE_QUEUE_FULL:
rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
break;
- case AP_RESET_DO:
- rc = snprintf(buf, PAGE_SIZE, "Reset Timer expired.\n");
- break;
- case AP_RESET_IN_PROGRESS:
- rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
- break;
default:
- break;
+ rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
}
spin_unlock_bh(&ap_dev->lock);
return rc;
int rc = 0;
spin_lock_bh(&ap_dev->lock);
- switch (ap_dev->interrupt) {
- case AP_INTR_DISABLED:
- rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
- break;
- case AP_INTR_ENABLED:
- rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
- break;
- case AP_INTR_IN_PROGRESS:
+ if (ap_dev->state == AP_STATE_SETIRQ_WAIT)
rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
- break;
- }
+ else if (ap_dev->interrupt == AP_INTR_ENABLED)
+ rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
+ else
+ rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
spin_unlock_bh(&ap_dev->lock);
return rc;
}
static int ap_dev_suspend(struct device *dev, pm_message_t state)
{
struct ap_device *ap_dev = to_ap_dev(dev);
- unsigned long flags;
/* Poll on the device until all requests are finished. */
- do {
- flags = 0;
- spin_lock_bh(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock_bh(&ap_dev->lock);
- } while ((flags & 1) || (flags & 2));
-
+ spin_lock_bh(&ap_dev->lock);
+ ap_dev->state = AP_STATE_SUSPEND_WAIT;
+ while (ap_sm_event(ap_dev, AP_EVENT_POLL) != AP_WAIT_NONE)
+ ;
+ ap_dev->state = AP_STATE_BORKED;
+ spin_unlock_bh(&ap_dev->lock);
return 0;
}
xchg(ap_airq.lsi_ptr, 0);
tasklet_enable(&ap_tasklet);
queue_work(ap_work_queue, &ap_config_work);
- wake_up(&ap_poll_wait);
}
static int ap_power_event(struct notifier_block *this, unsigned long event,
{
struct ap_device *ap_dev = to_ap_dev(dev);
struct ap_driver *ap_drv = to_ap_drv(dev->driver);
- int rc;
-
- ap_dev->drv = ap_drv;
-
- spin_lock_bh(&ap_device_list_lock);
- list_add(&ap_dev->list, &ap_device_list);
- spin_unlock_bh(&ap_device_list_lock);
+ int rc;
+ ap_dev->drv = ap_drv;
rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
- if (rc) {
- spin_lock_bh(&ap_device_list_lock);
- list_del_init(&ap_dev->list);
- spin_unlock_bh(&ap_device_list_lock);
- } else {
- if (ap_dev->reset == AP_RESET_IN_PROGRESS ||
- ap_dev->interrupt == AP_INTR_IN_PROGRESS)
- __ap_schedule_poll_timer();
- }
+ if (rc)
+ ap_dev->drv = NULL;
return rc;
}
return 0;
}
+static void ap_device_release(struct device *dev)
+{
+ kfree(to_ap_dev(dev));
+}
+
int ap_driver_register(struct ap_driver *ap_drv, struct module *owner,
char *name)
{
return rc;
}
-static void ap_interrupt_handler(struct airq_struct *airq)
-{
- inc_irq_stat(IRQIO_APB);
- if (!ap_suspend_flag)
- tasklet_schedule(&ap_tasklet);
-}
-
/**
* __ap_scan_bus(): Scan the AP bus.
* @dev: Pointer to device
return to_ap_dev(dev)->qid == (ap_qid_t)(unsigned long) data;
}
-static void ap_device_release(struct device *dev)
-{
- struct ap_device *ap_dev = to_ap_dev(dev);
-
- kfree(ap_dev);
-}
-
static void ap_scan_bus(struct work_struct *unused)
{
struct ap_device *ap_dev;
struct device *dev;
ap_qid_t qid;
int queue_depth = 0, device_type = 0;
- unsigned int device_functions;
- int rc, i;
+ unsigned int device_functions = 0;
+ int rc, i, borked;
ap_query_configuration();
if (ap_select_domain() != 0)
if (dev) {
ap_dev = to_ap_dev(dev);
spin_lock_bh(&ap_dev->lock);
- if (rc == -ENODEV || ap_dev->unregistered) {
- spin_unlock_bh(&ap_dev->lock);
- if (ap_dev->unregistered)
- i--;
- device_unregister(dev);
- put_device(dev);
- continue;
- }
+ if (rc == -ENODEV)
+ ap_dev->state = AP_STATE_BORKED;
+ borked = ap_dev->state == AP_STATE_BORKED;
spin_unlock_bh(&ap_dev->lock);
+ if (borked) /* Remove broken device */
+ device_unregister(dev);
put_device(dev);
- continue;
+ if (!borked)
+ continue;
}
if (rc)
continue;
if (!ap_dev)
break;
ap_dev->qid = qid;
- rc = ap_init_queue(ap_dev);
- if ((rc != 0) && (rc != -EBUSY)) {
- kfree(ap_dev);
- continue;
- }
+ ap_dev->state = AP_STATE_RESET_START;
+ ap_dev->interrupt = AP_INTR_DISABLED;
ap_dev->queue_depth = queue_depth;
ap_dev->raw_hwtype = device_type;
ap_dev->device_type = device_type;
ap_dev->functions = device_functions;
- ap_dev->unregistered = 1;
spin_lock_init(&ap_dev->lock);
INIT_LIST_HEAD(&ap_dev->pendingq);
INIT_LIST_HEAD(&ap_dev->requestq);
ap_dev->device.bus = &ap_bus_type;
ap_dev->device.parent = ap_root_device;
- if (dev_set_name(&ap_dev->device, "card%02x",
- AP_QID_DEVICE(ap_dev->qid))) {
+ rc = dev_set_name(&ap_dev->device, "card%02x",
+ AP_QID_DEVICE(ap_dev->qid));
+ if (rc) {
kfree(ap_dev);
continue;
}
+ /* Add to list of devices */
+ spin_lock_bh(&ap_device_list_lock);
+ list_add(&ap_dev->list, &ap_device_list);
+ spin_unlock_bh(&ap_device_list_lock);
+ /* Start with a device reset */
+ spin_lock_bh(&ap_dev->lock);
+ ap_sm_wait(ap_sm_event(ap_dev, AP_EVENT_POLL));
+ spin_unlock_bh(&ap_dev->lock);
+ /* Register device */
ap_dev->device.release = ap_device_release;
rc = device_register(&ap_dev->device);
if (rc) {
+ spin_lock_bh(&ap_dev->lock);
+ list_del_init(&ap_dev->list);
+ spin_unlock_bh(&ap_dev->lock);
put_device(&ap_dev->device);
continue;
}
/* Add device attributes. */
rc = sysfs_create_group(&ap_dev->device.kobj,
&ap_dev_attr_group);
- if (!rc) {
- spin_lock_bh(&ap_dev->lock);
- ap_dev->unregistered = 0;
- spin_unlock_bh(&ap_dev->lock);
- }
- else
+ if (rc) {
device_unregister(&ap_dev->device);
+ continue;
+ }
}
out:
mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
queue_work(ap_work_queue, &ap_config_work);
}
-/**
- * ap_poll_read(): Receive pending reply messages from an AP device.
- * @ap_dev: pointer to the AP device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Returns 0 if the device is still present, -ENODEV if not.
- */
-static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
-{
- struct ap_queue_status status;
- struct ap_message *ap_msg;
-
- if (ap_dev->queue_count <= 0)
- return 0;
- status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
- ap_dev->reply->message, ap_dev->reply->length);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- ap_dev->interrupt = status.int_enabled;
- atomic_dec(&ap_poll_requests);
- ap_decrease_queue_count(ap_dev);
- list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
- if (ap_msg->psmid != ap_dev->reply->psmid)
- continue;
- list_del_init(&ap_msg->list);
- ap_dev->pendingq_count--;
- ap_msg->receive(ap_dev, ap_msg, ap_dev->reply);
- break;
- }
- if (ap_dev->queue_count > 0)
- *flags |= 1;
- break;
- case AP_RESPONSE_NO_PENDING_REPLY:
- ap_dev->interrupt = status.int_enabled;
- if (status.queue_empty) {
- /* The card shouldn't forget requests but who knows. */
- atomic_sub(ap_dev->queue_count, &ap_poll_requests);
- ap_dev->queue_count = 0;
- list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
- ap_dev->requestq_count += ap_dev->pendingq_count;
- ap_dev->pendingq_count = 0;
- } else
- *flags |= 2;
- break;
- default:
- return -ENODEV;
- }
- return 0;
-}
-
-/**
- * ap_poll_write(): Send messages from the request queue to an AP device.
- * @ap_dev: pointer to the AP device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Returns 0 if the device is still present, -ENODEV if not.
- */
-static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
-{
- struct ap_queue_status status;
- struct ap_message *ap_msg;
-
- if (ap_dev->requestq_count <= 0 ||
- (ap_dev->queue_count >= ap_dev->queue_depth) ||
- (ap_dev->reset == AP_RESET_IN_PROGRESS))
- return 0;
- /* Start the next request on the queue. */
- ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
- status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length, ap_msg->special);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- atomic_inc(&ap_poll_requests);
- ap_increase_queue_count(ap_dev);
- list_move_tail(&ap_msg->list, &ap_dev->pendingq);
- ap_dev->requestq_count--;
- ap_dev->pendingq_count++;
- if (ap_dev->queue_count < ap_dev->queue_depth &&
- ap_dev->requestq_count > 0)
- *flags |= 1;
- *flags |= 2;
- break;
- case AP_RESPONSE_RESET_IN_PROGRESS:
- __ap_schedule_poll_timer();
- case AP_RESPONSE_Q_FULL:
- *flags |= 2;
- break;
- case AP_RESPONSE_MESSAGE_TOO_BIG:
- case AP_RESPONSE_REQ_FAC_NOT_INST:
- return -EINVAL;
- default:
- return -ENODEV;
- }
- return 0;
-}
-
-/**
- * ap_poll_queue(): Poll AP device for pending replies and send new messages.
- * Check if the queue has a pending reset. In case it's done re-enable
- * interrupts, otherwise reschedule the poll_timer for another attempt.
- * @ap_dev: pointer to the bus device
- * @flags: pointer to control flags, bit 2^0 is set if another poll is
- * required, bit 2^1 is set if the poll timer needs to get armed
- *
- * Poll AP device for pending replies and send new messages. If either
- * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
- * Returns 0.
- */
-static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
-{
- struct ap_queue_status status;
- int rc;
-
- if (ap_dev->reset == AP_RESET_IN_PROGRESS) {
- status = ap_test_queue(ap_dev->qid, NULL);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- ap_dev->reset = AP_RESET_IGNORE;
- if (ap_using_interrupts()) {
- rc = ap_queue_enable_interruption(
- ap_dev, ap_airq.lsi_ptr);
- if (!rc)
- ap_dev->interrupt = AP_INTR_IN_PROGRESS;
- else if (rc == -ENODEV) {
- pr_err("Registering adapter interrupts for "
- "AP %d failed\n", AP_QID_DEVICE(ap_dev->qid));
- return rc;
- }
- }
- /* fall through */
- case AP_RESPONSE_BUSY:
- case AP_RESPONSE_RESET_IN_PROGRESS:
- *flags |= AP_POLL_AFTER_TIMEOUT;
- break;
- case AP_RESPONSE_Q_NOT_AVAIL:
- case AP_RESPONSE_DECONFIGURED:
- case AP_RESPONSE_CHECKSTOPPED:
- return -ENODEV;
- default:
- break;
- }
- }
-
- if ((ap_dev->reset != AP_RESET_IN_PROGRESS) &&
- (ap_dev->interrupt == AP_INTR_IN_PROGRESS)) {
- status = ap_test_queue(ap_dev->qid, NULL);
- if (ap_using_interrupts()) {
- if (status.int_enabled == 1)
- ap_dev->interrupt = AP_INTR_ENABLED;
- else
- *flags |= AP_POLL_AFTER_TIMEOUT;
- } else
- ap_dev->interrupt = AP_INTR_DISABLED;
- }
-
- rc = ap_poll_read(ap_dev, flags);
- if (rc)
- return rc;
- return ap_poll_write(ap_dev, flags);
-}
-
-/**
- * __ap_queue_message(): Queue a message to a device.
- * @ap_dev: pointer to the AP device
- * @ap_msg: the message to be queued
- *
- * Queue a message to a device. Returns 0 if successful.
- */
-static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- struct ap_queue_status status;
-
- if (list_empty(&ap_dev->requestq) &&
- (ap_dev->queue_count < ap_dev->queue_depth) &&
- (ap_dev->reset != AP_RESET_IN_PROGRESS)) {
- status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length,
- ap_msg->special);
- switch (status.response_code) {
- case AP_RESPONSE_NORMAL:
- list_add_tail(&ap_msg->list, &ap_dev->pendingq);
- atomic_inc(&ap_poll_requests);
- ap_dev->pendingq_count++;
- ap_increase_queue_count(ap_dev);
- ap_dev->total_request_count++;
- break;
- case AP_RESPONSE_Q_FULL:
- case AP_RESPONSE_RESET_IN_PROGRESS:
- list_add_tail(&ap_msg->list, &ap_dev->requestq);
- ap_dev->requestq_count++;
- ap_dev->total_request_count++;
- return -EBUSY;
- case AP_RESPONSE_REQ_FAC_NOT_INST:
- case AP_RESPONSE_MESSAGE_TOO_BIG:
- ap_msg->rc = -EINVAL;
- ap_msg->receive(ap_dev, ap_msg, NULL);
- return -EINVAL;
- default: /* Device is gone. */
- ap_msg->rc = -ENODEV;
- ap_msg->receive(ap_dev, ap_msg, NULL);
- return -ENODEV;
- }
- } else {
- list_add_tail(&ap_msg->list, &ap_dev->requestq);
- ap_dev->requestq_count++;
- ap_dev->total_request_count++;
- return -EBUSY;
- }
- ap_schedule_poll_timer();
- return 0;
-}
-
-void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- unsigned long flags;
- int rc;
-
- /* For asynchronous message handling a valid receive-callback
- * is required. */
- BUG_ON(!ap_msg->receive);
-
- spin_lock_bh(&ap_dev->lock);
- if (!ap_dev->unregistered) {
- /* Make room on the queue by polling for finished requests. */
- rc = ap_poll_queue(ap_dev, &flags);
- if (!rc)
- rc = __ap_queue_message(ap_dev, ap_msg);
- if (!rc)
- wake_up(&ap_poll_wait);
- if (rc == -ENODEV)
- ap_dev->unregistered = 1;
- } else {
- ap_msg->rc = -ENODEV;
- ap_msg->receive(ap_dev, ap_msg, NULL);
- rc = -ENODEV;
- }
- spin_unlock_bh(&ap_dev->lock);
-}
-EXPORT_SYMBOL(ap_queue_message);
-
-/**
- * ap_cancel_message(): Cancel a crypto request.
- * @ap_dev: The AP device that has the message queued
- * @ap_msg: The message that is to be removed
- *
- * Cancel a crypto request. This is done by removing the request
- * from the device pending or request queue. Note that the
- * request stays on the AP queue. When it finishes the message
- * reply will be discarded because the psmid can't be found.
- */
-void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
-{
- struct ap_message *tmp;
-
- spin_lock_bh(&ap_dev->lock);
- if (!list_empty(&ap_msg->list)) {
- list_for_each_entry(tmp, &ap_dev->pendingq, list)
- if (tmp->psmid == ap_msg->psmid) {
- ap_dev->pendingq_count--;
- goto found;
- }
- ap_dev->requestq_count--;
- found:
- list_del_init(&ap_msg->list);
- }
- spin_unlock_bh(&ap_dev->lock);
-}
-EXPORT_SYMBOL(ap_cancel_message);
-
-/**
- * ap_poll_timeout(): AP receive polling for finished AP requests.
- * @unused: Unused pointer.
- *
- * Schedules the AP tasklet using a high resolution timer.
- */
-static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
-{
- if (!ap_suspend_flag)
- tasklet_schedule(&ap_tasklet);
- return HRTIMER_NORESTART;
-}
-
-/**
- * ap_reset(): Reset a not responding AP device.
- * @ap_dev: Pointer to the AP device
- *
- * Reset a not responding AP device and move all requests from the
- * pending queue to the request queue.
- */
-static void ap_reset(struct ap_device *ap_dev, unsigned long *flags)
-{
- int rc;
-
- atomic_sub(ap_dev->queue_count, &ap_poll_requests);
- ap_dev->queue_count = 0;
- list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
- ap_dev->requestq_count += ap_dev->pendingq_count;
- ap_dev->pendingq_count = 0;
- rc = ap_init_queue(ap_dev);
- if (rc == -ENODEV)
- ap_dev->unregistered = 1;
- else
- *flags |= AP_POLL_AFTER_TIMEOUT;
-}
-
-static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
-{
- if (!ap_dev->unregistered) {
- if (ap_poll_queue(ap_dev, flags))
- ap_dev->unregistered = 1;
- if (ap_dev->reset == AP_RESET_DO)
- ap_reset(ap_dev, flags);
- }
- return 0;
-}
-
-/**
- * ap_poll_all(): Poll all AP devices.
- * @dummy: Unused variable
- *
- * Poll all AP devices on the bus in a round robin fashion. Continue
- * polling until bit 2^0 of the control flags is not set. If bit 2^1
- * of the control flags has been set arm the poll timer.
- */
-static void ap_poll_all(unsigned long dummy)
-{
- unsigned long flags;
- struct ap_device *ap_dev;
-
- /* Reset the indicator if interrupts are used. Thus new interrupts can
- * be received. Doing it in the beginning of the tasklet is therefor
- * important that no requests on any AP get lost.
- */
- if (ap_using_interrupts())
- xchg(ap_airq.lsi_ptr, 0);
- do {
- flags = 0;
- spin_lock(&ap_device_list_lock);
- list_for_each_entry(ap_dev, &ap_device_list, list) {
- spin_lock(&ap_dev->lock);
- __ap_poll_device(ap_dev, &flags);
- spin_unlock(&ap_dev->lock);
- }
- spin_unlock(&ap_device_list_lock);
- } while (flags & AP_POLL_IMMEDIATELY);
- if (flags & AP_POLL_AFTER_TIMEOUT)
- __ap_schedule_poll_timer();
-}
-
-/**
- * ap_request_timeout(): Handling of request timeouts
- * @data: Holds the AP device.
- *
- * Handles request timeouts.
- */
-static void ap_request_timeout(unsigned long data)
-{
- struct ap_device *ap_dev = (struct ap_device *) data;
-
- if (ap_suspend_flag)
- return;
- if (ap_dev->reset == AP_RESET_ARMED) {
- ap_dev->reset = AP_RESET_DO;
-
- if (ap_using_interrupts())
- tasklet_schedule(&ap_tasklet);
- }
-}
-
static void ap_reset_domain(void)
{
int i;
goto out_root;
}
- if (ap_select_domain() == 0)
- ap_scan_bus(NULL);
-
/* Setup the AP bus rescan timer. */
setup_timer(&ap_config_timer, ap_config_timeout, 0);
- add_timer(&ap_config_timer);
- /* Setup the high resultion poll timer.
+ /*
+ * Setup the high resultion poll timer.
* If we are running under z/VM adjust polling to z/VM polling rate.
*/
if (MACHINE_IS_VM)
if (rc)
goto out_pm;
+ queue_work(ap_work_queue, &ap_config_work);
+
return 0;
out_pm:
ap_poll_thread_stop();
out_work:
- del_timer_sync(&ap_config_timer);
hrtimer_cancel(&ap_poll_timer);
destroy_workqueue(ap_work_queue);
out_root:
projects / deliverable / linux.git / commitdiff
