powerpc/powernv: Enable reading and updating of system parameters
authorNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Fri, 7 Mar 2014 05:32:09 +0000 (11:02 +0530)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Sun, 23 Mar 2014 22:47:30 +0000 (09:47 +1100)
This patch enables reading and updating of system parameters through
OPAL call.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/include/asm/opal.h
arch/powerpc/platforms/powernv/Makefile
arch/powerpc/platforms/powernv/opal-sysparam.c [new file with mode: 0644]
arch/powerpc/platforms/powernv/opal-wrappers.S
arch/powerpc/platforms/powernv/opal.c

index 1e186ff55f3eaf7d8250bbc9f49f0b0cb120142d..d239223279aa36e4a5387a8ce8d9d8d9f9ae3b88 100644 (file)
@@ -167,8 +167,10 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_DUMP_ACK                          84
 #define OPAL_GET_MSG                           85
 #define OPAL_CHECK_ASYNC_COMPLETION            86
-#define OPAL_DUMP_RESEND                       91
 #define OPAL_SYNC_HOST_REBOOT                  87
+#define OPAL_GET_PARAM                         89
+#define OPAL_SET_PARAM                         90
+#define OPAL_DUMP_RESEND                       91
 #define OPAL_DUMP_INFO2                                94
 
 #ifndef __ASSEMBLY__
@@ -410,6 +412,13 @@ enum OpalLPCAddressType {
        OPAL_LPC_FW     = 2,
 };
 
+/* System parameter permission */
+enum OpalSysparamPerm {
+       OPAL_SYSPARAM_READ      = 0x1,
+       OPAL_SYSPARAM_WRITE     = 0x2,
+       OPAL_SYSPARAM_RW        = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
+};
+
 struct opal_msg {
        uint32_t msg_type;
        uint32_t reserved;
@@ -859,6 +868,10 @@ int64_t opal_dump_resend_notification(void);
 int64_t opal_get_msg(uint64_t buffer, size_t size);
 int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token);
 int64_t opal_sync_host_reboot(void);
+int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
+               size_t length);
+int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
+               size_t length);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
@@ -900,6 +913,7 @@ extern void opal_nvram_init(void);
 extern void opal_flash_init(void);
 extern int opal_elog_init(void);
 extern void opal_platform_dump_init(void);
+extern void opal_sys_param_init(void);
 
 extern int opal_machine_check(struct pt_regs *regs);
 extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
index 3f9309c4218c4622acbd1fad5223fa75b2e2df9a..760b49948f76394e2d967357dbffed8326f4b2f2 100644 (file)
@@ -1,6 +1,6 @@
 obj-y                  += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
 obj-y                  += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
-obj-y                  += rng.o opal-elog.o opal-dump.o
+obj-y                  += rng.o opal-elog.o opal-dump.o opal-sysparam.o
 
 obj-$(CONFIG_SMP)      += smp.o
 obj-$(CONFIG_PCI)      += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-sysparam.c b/arch/powerpc/platforms/powernv/opal-sysparam.c
new file mode 100644 (file)
index 0000000..0bd249a
--- /dev/null
@@ -0,0 +1,290 @@
+/*
+ * PowerNV system parameter code
+ *
+ * Copyright (C) 2013 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gfp.h>
+#include <linux/stat.h>
+#include <asm/opal.h>
+
+#define MAX_PARAM_DATA_LEN     64
+
+static DEFINE_MUTEX(opal_sysparam_mutex);
+static struct kobject *sysparam_kobj;
+static void *param_data_buf;
+
+struct param_attr {
+       struct list_head list;
+       u32 param_id;
+       u32 param_size;
+       struct kobj_attribute kobj_attr;
+};
+
+static int opal_get_sys_param(u32 param_id, u32 length, void *buffer)
+{
+       struct opal_msg msg;
+       int ret, token;
+
+       token = opal_async_get_token_interruptible();
+       if (token < 0) {
+               if (token != -ERESTARTSYS)
+                       pr_err("%s: Couldn't get the token, returning\n",
+                                       __func__);
+               ret = token;
+               goto out;
+       }
+
+       ret = opal_get_param(token, param_id, (u64)buffer, length);
+       if (ret != OPAL_ASYNC_COMPLETION)
+               goto out_token;
+
+       ret = opal_async_wait_response(token, &msg);
+       if (ret) {
+               pr_err("%s: Failed to wait for the async response, %d\n",
+                               __func__, ret);
+               goto out_token;
+       }
+
+       ret = msg.params[1];
+
+out_token:
+       opal_async_release_token(token);
+out:
+       return ret;
+}
+
+static int opal_set_sys_param(u32 param_id, u32 length, void *buffer)
+{
+       struct opal_msg msg;
+       int ret, token;
+
+       token = opal_async_get_token_interruptible();
+       if (token < 0) {
+               if (token != -ERESTARTSYS)
+                       pr_err("%s: Couldn't get the token, returning\n",
+                                       __func__);
+               ret = token;
+               goto out;
+       }
+
+       ret = opal_set_param(token, param_id, (u64)buffer, length);
+
+       if (ret != OPAL_ASYNC_COMPLETION)
+               goto out_token;
+
+       ret = opal_async_wait_response(token, &msg);
+       if (ret) {
+               pr_err("%s: Failed to wait for the async response, %d\n",
+                               __func__, ret);
+               goto out_token;
+       }
+
+       ret = msg.params[1];
+
+out_token:
+       opal_async_release_token(token);
+out:
+       return ret;
+}
+
+static ssize_t sys_param_show(struct kobject *kobj,
+               struct kobj_attribute *kobj_attr, char *buf)
+{
+       struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+                       kobj_attr);
+       int ret;
+
+       mutex_lock(&opal_sysparam_mutex);
+       ret = opal_get_sys_param(attr->param_id, attr->param_size,
+                       param_data_buf);
+       if (ret)
+               goto out;
+
+       memcpy(buf, param_data_buf, attr->param_size);
+
+out:
+       mutex_unlock(&opal_sysparam_mutex);
+       return ret ? ret : attr->param_size;
+}
+
+static ssize_t sys_param_store(struct kobject *kobj,
+               struct kobj_attribute *kobj_attr, const char *buf, size_t count)
+{
+       struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+                       kobj_attr);
+       int ret;
+
+       mutex_lock(&opal_sysparam_mutex);
+       memcpy(param_data_buf, buf, count);
+       ret = opal_set_sys_param(attr->param_id, attr->param_size,
+                       param_data_buf);
+       mutex_unlock(&opal_sysparam_mutex);
+       return ret ? ret : count;
+}
+
+void __init opal_sys_param_init(void)
+{
+       struct device_node *sysparam;
+       struct param_attr *attr;
+       u32 *id, *size;
+       int count, i;
+       u8 *perm;
+
+       if (!opal_kobj) {
+               pr_warn("SYSPARAM: opal kobject is not available\n");
+               goto out;
+       }
+
+       sysparam_kobj = kobject_create_and_add("sysparams", opal_kobj);
+       if (!sysparam_kobj) {
+               pr_err("SYSPARAM: Failed to create sysparam kobject\n");
+               goto out;
+       }
+
+       /* Allocate big enough buffer for any get/set transactions */
+       param_data_buf = kzalloc(MAX_PARAM_DATA_LEN, GFP_KERNEL);
+       if (!param_data_buf) {
+               pr_err("SYSPARAM: Failed to allocate memory for param data "
+                               "buf\n");
+               goto out_kobj_put;
+       }
+
+       sysparam = of_find_node_by_path("/ibm,opal/sysparams");
+       if (!sysparam) {
+               pr_err("SYSPARAM: Opal sysparam node not found\n");
+               goto out_param_buf;
+       }
+
+       if (!of_device_is_compatible(sysparam, "ibm,opal-sysparams")) {
+               pr_err("SYSPARAM: Opal sysparam node not compatible\n");
+               goto out_node_put;
+       }
+
+       /* Number of parameters exposed through DT */
+       count = of_property_count_strings(sysparam, "param-name");
+       if (count < 0) {
+               pr_err("SYSPARAM: No string found of property param-name in "
+                               "the node %s\n", sysparam->name);
+               goto out_node_put;
+       }
+
+       id = kzalloc(sizeof(*id) * count, GFP_KERNEL);
+       if (!id) {
+               pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+                               "id\n");
+               goto out_node_put;
+       }
+
+       size = kzalloc(sizeof(*size) * count, GFP_KERNEL);
+       if (!size) {
+               pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+                               "size\n");
+               goto out_free_id;
+       }
+
+       perm = kzalloc(sizeof(*perm) * count, GFP_KERNEL);
+       if (!perm) {
+               pr_err("SYSPARAM: Failed to allocate memory to read supported "
+                               "action on the parameter");
+               goto out_free_size;
+       }
+
+       if (of_property_read_u32_array(sysparam, "param-id", id, count)) {
+               pr_err("SYSPARAM: Missing property param-id in the DT\n");
+               goto out_free_perm;
+       }
+
+       if (of_property_read_u32_array(sysparam, "param-len", size, count)) {
+               pr_err("SYSPARAM: Missing propery param-len in the DT\n");
+               goto out_free_perm;
+       }
+
+
+       if (of_property_read_u8_array(sysparam, "param-perm", perm, count)) {
+               pr_err("SYSPARAM: Missing propery param-perm in the DT\n");
+               goto out_free_perm;
+       }
+
+       attr = kzalloc(sizeof(*attr) * count, GFP_KERNEL);
+       if (!attr) {
+               pr_err("SYSPARAM: Failed to allocate memory for parameter "
+                               "attributes\n");
+               goto out_free_perm;
+       }
+
+       /* For each of the parameters, populate the parameter attributes */
+       for (i = 0; i < count; i++) {
+               sysfs_attr_init(&attr[i].kobj_attr.attr);
+               attr[i].param_id = id[i];
+               attr[i].param_size = size[i];
+               if (of_property_read_string_index(sysparam, "param-name", i,
+                               &attr[i].kobj_attr.attr.name))
+                       continue;
+
+               /* If the parameter is read-only or read-write */
+               switch (perm[i] & 3) {
+               case OPAL_SYSPARAM_READ:
+                       attr[i].kobj_attr.attr.mode = S_IRUGO;
+                       break;
+               case OPAL_SYSPARAM_WRITE:
+                       attr[i].kobj_attr.attr.mode = S_IWUGO;
+                       break;
+               case OPAL_SYSPARAM_RW:
+                       attr[i].kobj_attr.attr.mode = S_IRUGO | S_IWUGO;
+                       break;
+               default:
+                       break;
+               }
+
+               attr[i].kobj_attr.show = sys_param_show;
+               attr[i].kobj_attr.store = sys_param_store;
+
+               if (sysfs_create_file(sysparam_kobj, &attr[i].kobj_attr.attr)) {
+                       pr_err("SYSPARAM: Failed to create sysfs file %s\n",
+                                       attr[i].kobj_attr.attr.name);
+                       goto out_free_attr;
+               }
+       }
+
+       kfree(perm);
+       kfree(size);
+       kfree(id);
+       of_node_put(sysparam);
+       return;
+
+out_free_attr:
+       kfree(attr);
+out_free_perm:
+       kfree(perm);
+out_free_size:
+       kfree(size);
+out_free_id:
+       kfree(id);
+out_node_put:
+       of_node_put(sysparam);
+out_param_buf:
+       kfree(param_data_buf);
+out_kobj_put:
+       kobject_put(sysparam_kobj);
+out:
+       return;
+}
index 47ec3f738062de2a822dcf38453fecca4f442570..b17f2d8c4073b375d449356ee9d41edec5ea1589 100644 (file)
@@ -140,3 +140,5 @@ OPAL_CALL(opal_get_msg,                             OPAL_GET_MSG);
 OPAL_CALL(opal_check_completion,               OPAL_CHECK_ASYNC_COMPLETION);
 OPAL_CALL(opal_dump_resend_notification,       OPAL_DUMP_RESEND);
 OPAL_CALL(opal_sync_host_reboot,               OPAL_SYNC_HOST_REBOOT);
+OPAL_CALL(opal_get_param,                      OPAL_GET_PARAM);
+OPAL_CALL(opal_set_param,                      OPAL_SET_PARAM);
index 2e269c27dd23cc32da546b01f3cad960b080c8ba..e92f2f67640f7db39e18d78ccbb08d6ad12eed7e 100644 (file)
@@ -572,6 +572,8 @@ static int __init opal_init(void)
                opal_flash_init();
                /* Setup platform dump extract interface */
                opal_platform_dump_init();
+               /* Setup system parameters interface */
+               opal_sys_param_init();
        }
 
        return 0;
This page took 0.037631 seconds and 5 git commands to generate.