return SCALE(reg, 1250, 255);
}
-static int adm9240_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int adm9240_detect(struct i2c_client *client,
- struct i2c_board_info *info);
-static void adm9240_init_client(struct i2c_client *client);
-static int adm9240_remove(struct i2c_client *client);
-static struct adm9240_data *adm9240_update_device(struct device *dev);
-
-/* driver data */
-static const struct i2c_device_id adm9240_id[] = {
- { "adm9240", adm9240 },
- { "ds1780", ds1780 },
- { "lm81", lm81 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, adm9240_id);
-
-static struct i2c_driver adm9240_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "adm9240",
- },
- .probe = adm9240_probe,
- .remove = adm9240_remove,
- .id_table = adm9240_id,
- .detect = adm9240_detect,
- .address_list = normal_i2c,
-};
-
/* per client data */
struct adm9240_data {
struct device *hwmon_dev;
u8 vrm; /* -- vrm set on startup, no accessor */
};
+/* write new fan div, callers must hold data->update_lock */
+static void adm9240_write_fan_div(struct i2c_client *client, int nr,
+ u8 fan_div)
+{
+ u8 reg, old, shift = (nr + 2) * 2;
+
+ reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
+ old = (reg >> shift) & 3;
+ reg &= ~(3 << shift);
+ reg |= (fan_div << shift);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
+ dev_dbg(&client->dev,
+ "fan%d clock divider changed from %u to %u\n",
+ nr + 1, 1 << old, 1 << fan_div);
+}
+
+static struct adm9240_data *adm9240_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm9240_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ /* minimum measurement cycle: 1.75 seconds */
+ if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
+ || !data->valid) {
+
+ for (i = 0; i < 6; i++) { /* read voltages */
+ data->in[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN(i));
+ }
+ data->alarms = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_INT(0)) |
+ i2c_smbus_read_byte_data(client,
+ ADM9240_REG_INT(1)) << 8;
+
+ /*
+ * read temperature: assume temperature changes less than
+ * 0.5'C per two measurement cycles thus ignore possible
+ * but unlikely aliasing error on lsb reading. --Grant
+ */
+ data->temp = ((i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP) << 8) |
+ i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_CONF)) / 128;
+
+ for (i = 0; i < 2; i++) { /* read fans */
+ data->fan[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_FAN(i));
+
+ /* adjust fan clock divider on overflow */
+ if (data->valid && data->fan[i] == 255 &&
+ data->fan_div[i] < 3) {
+
+ adm9240_write_fan_div(client, i,
+ ++data->fan_div[i]);
+
+ /* adjust fan_min if active, but not to 0 */
+ if (data->fan_min[i] < 255 &&
+ data->fan_min[i] >= 2)
+ data->fan_min[i] /= 2;
+ }
+ }
+ data->last_updated_measure = jiffies;
+ }
+
+ /* minimum config reading cycle: 300 seconds */
+ if (time_after(jiffies, data->last_updated_config + (HZ * 300))
+ || !data->valid) {
+
+ for (i = 0; i < 6; i++) {
+ data->in_min[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN_MIN(i));
+ data->in_max[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN_MAX(i));
+ }
+ for (i = 0; i < 2; i++) {
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_FAN_MIN(i));
+ }
+ data->temp_max[0] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(0));
+ data->temp_max[1] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(1));
+
+ /* read fan divs and 5-bit VID */
+ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
+ data->fan_div[0] = (i >> 4) & 3;
+ data->fan_div[1] = (i >> 6) & 3;
+ data->vid = i & 0x0f;
+ data->vid |= (i2c_smbus_read_byte_data(client,
+ ADM9240_REG_VID4) & 1) << 4;
+ /* read analog out */
+ data->aout = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_ANALOG_OUT);
+
+ data->last_updated_config = jiffies;
+ data->valid = 1;
+ }
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
/*** sysfs accessors ***/
/* temperature */
return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]);
}
-/* write new fan div, callers must hold data->update_lock */
-static void adm9240_write_fan_div(struct i2c_client *client, int nr,
- u8 fan_div)
-{
- u8 reg, old, shift = (nr + 2) * 2;
-
- reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
- old = (reg >> shift) & 3;
- reg &= ~(3 << shift);
- reg |= (fan_div << shift);
- i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
- dev_dbg(&client->dev,
- "fan%d clock divider changed from %u to %u\n",
- nr + 1, 1 << old, 1 << fan_div);
-}
-
/*
* set fan speed low limit:
*
return 0;
}
-static int adm9240_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct adm9240_data *data;
- int err;
-
- data = devm_kzalloc(&new_client->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- i2c_set_clientdata(new_client, data);
- mutex_init(&data->update_lock);
-
- adm9240_init_client(new_client);
-
- /* populate sysfs filesystem */
- err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group);
- if (err)
- return err;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove;
- }
-
- return 0;
-
-exit_remove:
- sysfs_remove_group(&new_client->dev.kobj, &adm9240_group);
- return err;
-}
-
-static int adm9240_remove(struct i2c_client *client)
-{
- struct adm9240_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &adm9240_group);
-
- return 0;
-}
-
static void adm9240_init_client(struct i2c_client *client)
{
struct adm9240_data *data = i2c_get_clientdata(client);
}
}
-static struct adm9240_data *adm9240_update_device(struct device *dev)
+static int adm9240_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct adm9240_data *data = i2c_get_clientdata(client);
- int i;
+ struct adm9240_data *data;
+ int err;
- mutex_lock(&data->update_lock);
+ data = devm_kzalloc(&new_client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- /* minimum measurement cycle: 1.75 seconds */
- if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
- || !data->valid) {
+ i2c_set_clientdata(new_client, data);
+ mutex_init(&data->update_lock);
- for (i = 0; i < 6; i++) { /* read voltages */
- data->in[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN(i));
- }
- data->alarms = i2c_smbus_read_byte_data(client,
- ADM9240_REG_INT(0)) |
- i2c_smbus_read_byte_data(client,
- ADM9240_REG_INT(1)) << 8;
+ adm9240_init_client(new_client);
- /*
- * read temperature: assume temperature changes less than
- * 0.5'C per two measurement cycles thus ignore possible
- * but unlikely aliasing error on lsb reading. --Grant
- */
- data->temp = ((i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP) << 8) |
- i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP_CONF)) / 128;
+ /* populate sysfs filesystem */
+ err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group);
+ if (err)
+ return err;
- for (i = 0; i < 2; i++) { /* read fans */
- data->fan[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_FAN(i));
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
- /* adjust fan clock divider on overflow */
- if (data->valid && data->fan[i] == 255 &&
- data->fan_div[i] < 3) {
+ return 0;
- adm9240_write_fan_div(client, i,
- ++data->fan_div[i]);
+exit_remove:
+ sysfs_remove_group(&new_client->dev.kobj, &adm9240_group);
+ return err;
+}
- /* adjust fan_min if active, but not to 0 */
- if (data->fan_min[i] < 255 &&
- data->fan_min[i] >= 2)
- data->fan_min[i] /= 2;
- }
- }
- data->last_updated_measure = jiffies;
- }
+static int adm9240_remove(struct i2c_client *client)
+{
+ struct adm9240_data *data = i2c_get_clientdata(client);
- /* minimum config reading cycle: 300 seconds */
- if (time_after(jiffies, data->last_updated_config + (HZ * 300))
- || !data->valid) {
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &adm9240_group);
- for (i = 0; i < 6; i++) {
- data->in_min[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN_MIN(i));
- data->in_max[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN_MAX(i));
- }
- for (i = 0; i < 2; i++) {
- data->fan_min[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_FAN_MIN(i));
- }
- data->temp_max[0] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP_MAX(0));
- data->temp_max[1] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP_MAX(1));
+ return 0;
+}
- /* read fan divs and 5-bit VID */
- i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
- data->fan_div[0] = (i >> 4) & 3;
- data->fan_div[1] = (i >> 6) & 3;
- data->vid = i & 0x0f;
- data->vid |= (i2c_smbus_read_byte_data(client,
- ADM9240_REG_VID4) & 1) << 4;
- /* read analog out */
- data->aout = i2c_smbus_read_byte_data(client,
- ADM9240_REG_ANALOG_OUT);
+static const struct i2c_device_id adm9240_id[] = {
+ { "adm9240", adm9240 },
+ { "ds1780", ds1780 },
+ { "lm81", lm81 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm9240_id);
- data->last_updated_config = jiffies;
- data->valid = 1;
- }
- mutex_unlock(&data->update_lock);
- return data;
-}
+static struct i2c_driver adm9240_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "adm9240",
+ },
+ .probe = adm9240_probe,
+ .remove = adm9240_remove,
+ .id_table = adm9240_id,
+ .detect = adm9240_detect,
+ .address_list = normal_i2c,
+};
module_i2c_driver(adm9240_driver);
projects / deliverable / linux.git / commitdiff
