int mips_last_fp_arg_regnum;
int mips_default_saved_regsize;
int mips_fp_register_double;
- int mips_regs_have_home_p;
int mips_default_stack_argsize;
int gdb_target_is_mips64;
int default_mask_address_p;
MIPS_FPU_TYPE. */
#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
-/* Does the caller allocate a ``home'' for each register used in the
- function call? The N32 ABI and MIPS_EABI do not, the others do. */
-
-#define MIPS_REGS_HAVE_HOME_P (gdbarch_tdep (current_gdbarch)->mips_regs_have_home_p)
-
/* The amount of space reserved on the stack for registers. This is
different to MIPS_SAVED_REGSIZE as it determines the alignment of
data allocated after the registers have run out. */
#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
CORE_ADDR
-mips_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_eabi_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
sp = ROUND_DOWN (sp, 16);
struct_addr = ROUND_DOWN (struct_addr, 16);
- /* Now make space on the stack for the args. We allocate more
+ /* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
- passed in registers, but that's OK. */
+ passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), MIPS_STACK_ARGSIZE);
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ MIPS_STACK_ARGSIZE);
sp -= ROUND_UP (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "mips_push_arguments: sp=0x%s allocated %d\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_arguments: sp=0x%s allocated %d\n",
paddr_nz (sp), ROUND_UP (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
float_argreg = FPA0_REGNUM;
- /* the struct_return pointer occupies the first parameter-passing reg */
+ /* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_eabi_push_arguments: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- if (MIPS_REGS_HAVE_HOME_P)
- stack_offset += MIPS_STACK_ARGSIZE;
}
/* Now load as many as possible of the first arguments into
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_push_arguments: %d len=%d type=%d",
+ "mips_eabi_push_arguments: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
/* The EABI passes structures that do not fit in a register by
- reference. In all other cases, pass the structure by value. */
- if (MIPS_EABI
- && len > MIPS_SAVED_REGSIZE
+ reference. */
+ if (len > MIPS_SAVED_REGSIZE
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
up before the check to see if there are any FP registers
- left. Non MIPS_EABI targets also pass the FP in the integer
- registers so also round up normal registers. */
+ left. Non MIPS_EABI targets also pass the FP in the integer
+ registers so also round up normal registers. */
if (!FP_REGISTER_DOUBLE
&& fp_register_arg_p (typecode, arg_type))
{
because those registers are normally skipped. */
/* MIPS_EABI squeezes a struct that contains a single floating
point value into an FP register instead of pushing it onto the
- stack. */
+ stack. */
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
- }
/* Write the high word of the double to the odd register(s). */
regval = extract_unsigned_integer (val + 4 - low_offset, 4);
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
- }
}
else
{
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
- }
}
- /* Reserve space for the FP register. */
- if (MIPS_REGS_HAVE_HOME_P)
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
}
else
{
compatibility, we will put them in both places. */
int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
(len % MIPS_SAVED_REGSIZE != 0));
- /* Structures should be aligned to eight bytes (even arg registers)
- on MIPS_ABI_O32 if their first member has double precision. */
- if (tdep->mips_abi == MIPS_ABI_O32
- && mips_type_needs_double_align (arg_type))
- {
- if ((argreg & 1))
- argreg++;
- }
+
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len =
+ len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
/* Note!!! This is NOT an else clause. Odd sized
structs may go thru BOTH paths. Floating point
- arguments will not. */
+ arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_unsigned_integer (val, partial_len);
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
-
- It does not seem to be necessary to do the
- same for integral types.
-
- Also don't do this adjustment on EABI and O64
- binaries.
-
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
- part of storing the argument in a register a
- register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
-
- if (!MIPS_EABI
- && MIPS_SAVED_REGSIZE < 8
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
- TARGET_CHAR_BIT);
-
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
phex (regval, MIPS_SAVED_REGSIZE));
write_register (argreg, regval);
argreg++;
-
- /* If this is the old ABI, prevent subsequent floating
- point arguments from being passed in floating point
- registers. */
- if (!MIPS_EABI)
- float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
}
len -= partial_len;
/* Compute the the offset into the stack at which we
will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated.
-
In the new EABI (and the NABI32), the stack_offset
- only needs to be adjusted when it has been used.. */
+ only needs to be adjusted when it has been used. */
- if (MIPS_REGS_HAVE_HOME_P || stack_used_p)
+ if (stack_used_p)
stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
}
}
argreg = A0_REGNUM;
float_argreg = FPA0_REGNUM;
- /* the struct_return pointer occupies the first parameter-passing reg */
+ /* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
int argnum;
int len = 0;
int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->mips_regs_have_home_p = 1;
tdep->gdb_target_is_mips64 = 0;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->mips_regs_have_home_p = 1;
tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
mips_o32_use_struct_convention);
break;
case MIPS_ABI_EABI32:
- set_gdbarch_push_arguments (gdbarch, mips_push_arguments);
+ set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
tdep->mips_default_saved_regsize = 4;
tdep->mips_default_stack_argsize = 4;
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 0;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
- set_gdbarch_push_arguments (gdbarch, mips_push_arguments);
+ set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
fprintf_unfiltered (file,
"mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
FP_REGISTER_DOUBLE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_REGS_HAVE_HOME_P = %d\n",
- MIPS_REGS_HAVE_HOME_P);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
MIPS_DEFAULT_STACK_ARGSIZE);
projects / deliverable / binutils-gdb.git / commitdiff
