return 0;
}
-/*
- * Send a command to the controller, and wait for it to complete.
- * Only used at init time.
+/* Send command c to controller h and poll for it to complete.
+ * Turns interrupts off on the board. Used at driver init time
+ * and during SCSI error recovery.
*/
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: periph device address is scsi3addr */
- unsigned int log_unit,
- __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
{
- CommandList_struct *c;
int i;
unsigned long complete;
- ctlr_info_t *info_p = hba[ctlr];
+ int status = IO_ERROR;
u64bit buff_dma_handle;
- int status, done = 0;
- if ((c = cmd_alloc(info_p, 1)) == NULL) {
- printk(KERN_WARNING "cciss: unable to get memory");
- return IO_ERROR;
- }
- status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
- log_unit, page_code, scsi3addr, cmd_type);
- if (status != IO_OK) {
- cmd_free(info_p, c, 1);
- return status;
- }
- resend_cmd1:
- /*
- * Disable interrupt
- */
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: turning intr off\n");
-#endif /* CCISS_DEBUG */
- info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
+resend_cmd1:
+
+ /* Disable interrupt on the board. */
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
/* Make sure there is room in the command FIFO */
/* Actually it should be completely empty at this time */
/* tape side of the driver. */
for (i = 200000; i > 0; i--) {
/* if fifo isn't full go */
- if (!(info_p->access.fifo_full(info_p))) {
-
+ if (!(h->access.fifo_full(h)))
break;
- }
udelay(10);
printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
- " waiting!\n", ctlr);
+ " waiting!\n", h->ctlr);
}
- /*
- * Send the cmd
- */
- info_p->access.submit_command(info_p, c);
- done = 0;
+ h->access.submit_command(h, c); /* Send the cmd */
do {
- complete = pollcomplete(ctlr);
+ complete = pollcomplete(h->ctlr);
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss: command completed\n");
if (complete == 1) {
printk(KERN_WARNING
"cciss cciss%d: SendCmd Timeout out, "
- "No command list address returned!\n", ctlr);
+ "No command list address returned!\n", h->ctlr);
status = IO_ERROR;
- done = 1;
break;
}
- /* This will need to change for direct lookup completions */
- if ((complete & CISS_ERROR_BIT)
- && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
- /* if data overrun or underun on Report command
- ignore it
- */
- if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
- (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
- (c->Request.CDB[0] == CISS_INQUIRY)) &&
- ((c->err_info->CommandStatus ==
- CMD_DATA_OVERRUN) ||
- (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
- )) {
- complete = c->busaddr;
- } else {
- if (c->err_info->CommandStatus ==
- CMD_UNSOLICITED_ABORT) {
- printk(KERN_WARNING "cciss%d: "
- "unsolicited abort %p\n",
- ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING
- "cciss%d: retrying %p\n",
- ctlr, c);
- c->retry_count++;
- /* erase the old error */
- /* information */
- memset(c->err_info, 0,
- sizeof
- (ErrorInfo_struct));
- goto resend_cmd1;
- } else {
- printk(KERN_WARNING
- "cciss%d: retried %p too "
- "many times\n", ctlr, c);
- status = IO_ERROR;
- goto cleanup1;
- }
- } else if (c->err_info->CommandStatus ==
- CMD_UNABORTABLE) {
- printk(KERN_WARNING
- "cciss%d: command could not be aborted.\n",
- ctlr);
- status = IO_ERROR;
- goto cleanup1;
- }
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " Error %x \n", ctlr,
- c->err_info->CommandStatus);
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " offensive info\n"
- " size %x\n num %x value %x\n",
- ctlr,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_size,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_num,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_value);
- status = IO_ERROR;
- goto cleanup1;
- }
+ /* If it's not the cmd we're looking for, save it for later */
+ if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
+ if (add_sendcmd_reject(c->Request.CDB[0],
+ h->ctlr, complete) != 0)
+ BUG(); /* we are hosed if we get here. */
+ continue;
+ }
+
+ /* It is our command. If no error, we're done. */
+ if (!(complete & CISS_ERROR_BIT)) {
+ status = IO_OK;
+ break;
+ }
+
+ /* There is an error... */
+
+ /* if data overrun or underun on Report command ignore it */
+ if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
+ (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
+ (c->Request.CDB[0] == CISS_INQUIRY)) &&
+ ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
+ (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
+ complete = c->busaddr;
+ status = IO_OK;
+ break;
}
- /* This will need changing for direct lookup completions */
- if (complete != c->busaddr) {
- if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
- BUG(); /* we are pretty much hosed if we get here. */
+
+ if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
+ printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
+ h->ctlr, c);
+ if (c->retry_count < MAX_CMD_RETRIES) {
+ printk(KERN_WARNING "cciss%d: retrying %p\n",
+ h->ctlr, c);
+ c->retry_count++;
+ /* erase the old error information */
+ memset(c->err_info, 0, sizeof(c->err_info));
+ goto resend_cmd1;
}
- continue;
- } else
- done = 1;
- } while (!done);
+ printk(KERN_WARNING "cciss%d: retried %p too many "
+ "times\n", h->ctlr, c);
+ status = IO_ERROR;
+ goto cleanup1;
+ }
+
+ if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
+ printk(KERN_WARNING "cciss%d: command could not be "
+ "aborted.\n", h->ctlr);
+ status = IO_ERROR;
+ goto cleanup1;
+ }
+
+ printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
+ printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
+ c->Request.CDB[0], c->err_info->CommandStatus);
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
+ printk(KERN_WARNING "Target status = 0x%02x\n",
+ c->err_info->ScsiStatus);
+ if (c->err_info->ScsiStatus == 2) /* chk cond */
+ printk(KERN_WARNING "Sense key = 0x%02x\n",
+ 0xf & c->err_info->SenseInfo[2]);
+ }
+
+ status = IO_ERROR;
+ goto cleanup1;
+
+ } while (1);
- cleanup1:
+cleanup1:
/* unlock the data buffer from DMA */
buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
+ pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
#ifdef CONFIG_CISS_SCSI_TAPE
/* if we saved some commands for later, process them now. */
- if (info_p->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, info_p);
+ if (h->scsi_rejects.ncompletions > 0)
+ do_cciss_intr(0, h);
#endif
- cmd_free(info_p, c, 1);
+ return status;
+}
+
+/*
+ * Send a command to the controller, and wait for it to complete.
+ * Used at init time, and during SCSI error recovery.
+ */
+static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
+ unsigned int use_unit_num,/* 0: address the controller,
+ 1: address logical volume log_unit,
+ 2: periph device address is scsi3addr */
+ unsigned int log_unit,
+ __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+{
+ CommandList_struct *c;
+ int status;
+
+ c = cmd_alloc(hba[ctlr], 1);
+ if (!c) {
+ printk(KERN_WARNING "cciss: unable to get memory");
+ return IO_ERROR;
+ }
+ status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
+ log_unit, page_code, scsi3addr, cmd_type);
+ if (status == IO_OK)
+ status = sendcmd_core(hba[ctlr], c);
+ cmd_free(hba[ctlr], c, 1);
return status;
}
projects / deliverable / linux.git / commitdiff
