Enable support for Amplicon PCI236 DIO board.
To compile this driver as a module, choose M here: the module will be
- called amplc_pc236.
+ called amplc_pci236.
config COMEDI_AMPLC_PC263_PCI
tristate "Amplicon PCI263 relay board support"
# Comedi ISA drivers
obj-$(CONFIG_COMEDI_AMPLC_DIO200_ISA) += amplc_dio200.o
+obj-$(CONFIG_COMEDI_AMPLC_PC236_ISA) += amplc_pc236.o
obj-$(CONFIG_COMEDI_AMPLC_PC263_ISA) += amplc_pc263.o
obj-$(CONFIG_COMEDI_PCL711) += pcl711.o
obj-$(CONFIG_COMEDI_PCL724) += pcl724.o
obj-$(CONFIG_COMEDI_ADV_PCI1724) += adv_pci1724.o
obj-$(CONFIG_COMEDI_ADV_PCI_DIO) += adv_pci_dio.o
obj-$(CONFIG_COMEDI_AMPLC_DIO200_PCI) += amplc_dio200_pci.o
-obj-$(CONFIG_COMEDI_AMPLC_PC236) += amplc_pc236.o
+obj-$(CONFIG_COMEDI_AMPLC_PC236_PCI) += amplc_pci236.o
obj-$(CONFIG_COMEDI_AMPLC_PC263_PCI) += amplc_pci263.o
obj-$(CONFIG_COMEDI_AMPLC_PCI224) += amplc_pci224.o
obj-$(CONFIG_COMEDI_AMPLC_PCI230) += amplc_pci230.o
obj-$(CONFIG_COMEDI_8255) += 8255.o
obj-$(CONFIG_COMEDI_AMPLC_DIO200) += amplc_dio200_common.o
+obj-$(CONFIG_COMEDI_AMPLC_PC236) += amplc_pc236_common.o
obj-$(CONFIG_COMEDI_DAS08) += das08.o
obj-$(CONFIG_COMEDI_FC) += comedi_fc.o
/*
* comedi/drivers/amplc_pc236.c
- * Driver for Amplicon PC36AT and PCI236 DIO boards.
+ * Driver for Amplicon PC36AT DIO boards.
*
* Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/>
*
*/
/*
* Driver: amplc_pc236
- * Description: Amplicon PC36AT, PCI236
+ * Description: Amplicon PC36AT
* Author: Ian Abbott <abbotti@mev.co.uk>
- * Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236)
- * Updated: Thu, 24 Jul 2014 14:25:26 +0000
+ * Devices: [Amplicon] PC36AT (pc36at)
+ * Updated: Fri, 25 Jul 2014 15:32:40 +0000
* Status: works
*
* Configuration options - PC36AT:
* [0] - I/O port base address
* [1] - IRQ (optional)
*
- * Manual configuration of PCI board (PCI236) is not supported; it is
- * configured automatically.
- *
- * The PC36AT ISA board and PCI236 PCI board have a single 8255 appearing
- * as subdevice 0.
+ * The PC36AT board has a single 8255 appearing as subdevice 0.
*
* Subdevice 1 pretends to be a digital input device, but it always returns
* 0 when read. However, if you run a command with scan_begin_src=TRIG_EXT,
*/
#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
#include "../comedidev.h"
-#include "comedi_fc.h"
-#include "8255.h"
-#include "plx9052.h"
-
-#define DO_ISA IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
-#define DO_PCI IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
-
-/* PC36AT / PCI236 registers */
-
-/* Disable, and clear, interrupts */
-#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1POL | \
- PLX9052_INTCSR_LI2POL | \
- PLX9052_INTCSR_LI1SEL | \
- PLX9052_INTCSR_LI1CLRINT)
-
-/* Enable, and clear, interrupts */
-#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB | \
- PLX9052_INTCSR_LI1POL | \
- PLX9052_INTCSR_LI2POL | \
- PLX9052_INTCSR_PCIENAB | \
- PLX9052_INTCSR_LI1SEL | \
- PLX9052_INTCSR_LI1CLRINT)
-
-/*
- * Board descriptions for Amplicon PC36AT and PCI236.
- */
-
-enum pc236_bustype { isa_bustype, pci_bustype };
-
-struct pc236_board {
- const char *name;
- enum pc236_bustype bustype;
- void (*intr_update_cb)(struct comedi_device *dev, bool enable);
- bool (*intr_chk_clr_cb)(struct comedi_device *dev);
-};
-
-struct pc236_private {
- unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
- bool enable_irq;
-};
-
-/* test if ISA supported and this is an ISA board */
-static inline bool is_isa_board(const struct pc236_board *board)
-{
- return DO_ISA && board->bustype == isa_bustype;
-}
-
-/* test if PCI supported and this is a PCI board */
-static inline bool is_pci_board(const struct pc236_board *board)
-{
- return DO_PCI && board->bustype == pci_bustype;
-}
-
-static void pc236_intr_update(struct comedi_device *dev, bool enable)
-{
- const struct pc236_board *thisboard = comedi_board(dev);
- struct pc236_private *devpriv = dev->private;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->enable_irq = enable;
- if (thisboard->intr_update_cb)
- thisboard->intr_update_cb(dev, enable);
- spin_unlock_irqrestore(&dev->spinlock, flags);
-}
-
-/*
- * This function is called when an interrupt occurs to check whether
- * the interrupt has been marked as enabled and was generated by the
- * board. If so, the function prepares the hardware for the next
- * interrupt.
- * Returns false if the interrupt should be ignored.
- */
-static bool pc236_intr_check(struct comedi_device *dev)
-{
- const struct pc236_board *thisboard = comedi_board(dev);
- struct pc236_private *devpriv = dev->private;
- bool retval = false;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->spinlock, flags);
- if (devpriv->enable_irq) {
- if (thisboard->intr_chk_clr_cb)
- retval = thisboard->intr_chk_clr_cb(dev);
- else
- retval = true;
- }
- spin_unlock_irqrestore(&dev->spinlock, flags);
-
- return retval;
-}
-
-/*
- * Input from subdevice 1.
- * Copied from the comedi_parport driver.
- */
-static int pc236_intr_insn(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data)
-{
- data[1] = 0;
- return insn->n;
-}
-
-/*
- * Subdevice 1 command test.
- * Copied from the comedi_parport driver.
- */
-static int pc236_intr_cmdtest(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_cmd *cmd)
-{
- int err = 0;
-
- /* Step 1 : check if triggers are trivially valid */
-
- err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
- err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
- err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
- err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
- err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
-
- if (err)
- return 1;
-
- /* Step 2a : make sure trigger sources are unique */
- /* Step 2b : and mutually compatible */
-
- if (err)
- return 2;
-
- /* Step 3: check it arguments are trivially valid */
-
- err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
- err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
- err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
- err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
-
- if (err)
- return 3;
-
- /* step 4: ignored */
-
- if (err)
- return 4;
-
- return 0;
-}
-
-/*
- * Subdevice 1 command.
- */
-static int pc236_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
-{
- pc236_intr_update(dev, true);
-
- return 0;
-}
-
-/*
- * Subdevice 1 cancel command.
- */
-static int pc236_intr_cancel(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- pc236_intr_update(dev, false);
-
- return 0;
-}
-
-/*
- * Interrupt service routine.
- * Based on the comedi_parport driver.
- */
-static irqreturn_t pc236_interrupt(int irq, void *d)
-{
- struct comedi_device *dev = d;
- struct comedi_subdevice *s = dev->read_subdev;
- bool handled;
-
- handled = pc236_intr_check(dev);
- if (dev->attached && handled) {
- comedi_buf_put(s, 0);
- s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
- comedi_event(dev, s);
- }
- return IRQ_RETVAL(handled);
-}
-
-static int pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
- unsigned int irq, unsigned long req_irq_flags)
-{
- struct comedi_subdevice *s;
- int ret;
-
- dev->iobase = iobase;
-
- ret = comedi_alloc_subdevices(dev, 2);
- if (ret)
- return ret;
-
- s = &dev->subdevices[0];
- /* digital i/o subdevice (8255) */
- ret = subdev_8255_init(dev, s, NULL, iobase);
- if (ret)
- return ret;
-
- s = &dev->subdevices[1];
- dev->read_subdev = s;
- s->type = COMEDI_SUBD_UNUSED;
- pc236_intr_update(dev, false);
- if (irq) {
- if (request_irq(irq, pc236_interrupt, req_irq_flags,
- dev->board_name, dev) >= 0) {
- dev->irq = irq;
- s->type = COMEDI_SUBD_DI;
- s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
- s->n_chan = 1;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = pc236_intr_insn;
- s->len_chanlist = 1;
- s->do_cmdtest = pc236_intr_cmdtest;
- s->do_cmd = pc236_intr_cmd;
- s->cancel = pc236_intr_cancel;
- }
- }
-
- return 0;
-}
+#include "amplc_pc236.h"
static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
struct pc236_private *devpriv;
int ret;
- if (!DO_ISA)
- return -EINVAL;
-
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv)
return -ENOMEM;
if (ret)
return ret;
- return pc236_common_attach(dev, dev->iobase, it->options[1], 0);
-}
-
-static void pci236_intr_update_cb(struct comedi_device *dev, bool enable)
-{
- struct pc236_private *devpriv = dev->private;
-
- /* this will also clear the "local interrupt 1" latch */
- outl(enable ? PCI236_INTR_ENABLE : PCI236_INTR_DISABLE,
- devpriv->lcr_iobase + PLX9052_INTCSR);
-}
-
-static bool pci236_intr_chk_clr_cb(struct comedi_device *dev)
-{
- struct pc236_private *devpriv = dev->private;
-
- /* check if interrupt occurred */
- if (!(inl(devpriv->lcr_iobase + PLX9052_INTCSR) &
- PLX9052_INTCSR_LI1STAT))
- return false;
- /* clear the interrupt */
- pci236_intr_update_cb(dev, devpriv->enable_irq);
- return true;
-}
-
-static const struct pc236_board pc236_pci_board = {
- .name = "pci236",
- .intr_update_cb = pci236_intr_update_cb,
- .intr_chk_clr_cb = pci236_intr_chk_clr_cb,
- .bustype = pci_bustype,
-};
-
-static int pc236_auto_attach(struct comedi_device *dev,
- unsigned long context_unused)
-{
- struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
- struct pc236_private *devpriv;
- unsigned long iobase;
- int ret;
-
- if (!DO_PCI)
- return -EINVAL;
-
- dev_info(dev->class_dev, "attach pci %s\n", pci_name(pci_dev));
-
- devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
- if (!devpriv)
- return -ENOMEM;
-
- dev->board_ptr = &pc236_pci_board;
- dev->board_name = pc236_pci_board.name;
- ret = comedi_pci_enable(dev);
- if (ret)
- return ret;
-
- devpriv->lcr_iobase = pci_resource_start(pci_dev, 1);
- iobase = pci_resource_start(pci_dev, 2);
- return pc236_common_attach(dev, iobase, pci_dev->irq, IRQF_SHARED);
-}
-
-static void pc236_detach(struct comedi_device *dev)
-{
- const struct pc236_board *thisboard = comedi_board(dev);
-
- if (!thisboard)
- return;
- if (is_isa_board(thisboard)) {
- comedi_legacy_detach(dev);
- } else if (is_pci_board(thisboard)) {
- if (dev->irq)
- free_irq(dev->irq, dev);
- comedi_pci_disable(dev);
- }
+ return amplc_pc236_common_attach(dev, dev->iobase, it->options[1], 0);
}
-static const struct pc236_board pc236_isa_boards[] = {
+static const struct pc236_board pc236_boards[] = {
{
.name = "pc36at",
.bustype = isa_bustype,
.driver_name = "amplc_pc236",
.module = THIS_MODULE,
.attach = pc236_attach,
- .auto_attach = pc236_auto_attach,
- .detach = pc236_detach,
-#if DO_ISA
- .board_name = &pc236_isa_boards[0].name,
+ .detach = comedi_legacy_detach,
+ .board_name = &pc236_boards[0].name,
.offset = sizeof(struct pc236_board),
- .num_names = ARRAY_SIZE(pc236_isa_boards),
-#endif
-};
-
-#if DO_PCI
-static const struct pci_device_id pc236_pci_table[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, 0x0009) },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pc236_pci_table);
-
-static int amplc_pc236_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- return comedi_pci_auto_config(dev, &lc_pc236_driver,
- id->driver_data);
-}
-
-static struct pci_driver amplc_pc236_pci_driver = {
- .name = "amplc_pc236",
- .id_table = pc236_pci_table,
- .probe = &lc_pc236_pci_probe,
- .remove = comedi_pci_auto_unconfig,
+ .num_names = ARRAY_SIZE(pc236_boards),
};
-module_comedi_pci_driver(amplc_pc236_driver, amplc_pc236_pci_driver);
-#else
module_comedi_driver(amplc_pc236_driver);
-#endif
MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for Amplicon PC36AT DIO boards");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * comedi/drivers/amplc_pc236.h
+ * Header for "amplc_pc236", "amplc_pci236" and "amplc_pc236_common".
+ *
+ * Copyright (C) 2002-2014 MEV Ltd. <http://www.mev.co.uk/>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AMPLC_PC236_H_INCLUDED
+#define AMPLC_PC236_H_INCLUDED
+
+#include <linux/types.h>
+
+struct comedi_device;
+
+enum pc236_bustype { isa_bustype, pci_bustype };
+
+struct pc236_board {
+ const char *name;
+ enum pc236_bustype bustype;
+ void (*intr_update_cb)(struct comedi_device *dev, bool enable);
+ bool (*intr_chk_clr_cb)(struct comedi_device *dev);
+};
+
+struct pc236_private {
+ unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
+ bool enable_irq;
+};
+
+int amplc_pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
+ unsigned int irq, unsigned long req_irq_flags);
+
+#endif
--- /dev/null
+/*
+ * comedi/drivers/amplc_pc236_common.c
+ * Common support code for "amplc_pc236" and "amplc_pci236".
+ *
+ * Copyright (C) 2002-2014 MEV Ltd. <http://www.mev.co.uk/>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include "../comedidev.h"
+
+#include "amplc_pc236.h"
+#include "comedi_fc.h"
+#include "8255.h"
+
+static void pc236_intr_update(struct comedi_device *dev, bool enable)
+{
+ const struct pc236_board *thisboard = comedi_board(dev);
+ struct pc236_private *devpriv = dev->private;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->spinlock, flags);
+ devpriv->enable_irq = enable;
+ if (thisboard->intr_update_cb)
+ thisboard->intr_update_cb(dev, enable);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+}
+
+/*
+ * This function is called when an interrupt occurs to check whether
+ * the interrupt has been marked as enabled and was generated by the
+ * board. If so, the function prepares the hardware for the next
+ * interrupt.
+ * Returns false if the interrupt should be ignored.
+ */
+static bool pc236_intr_check(struct comedi_device *dev)
+{
+ const struct pc236_board *thisboard = comedi_board(dev);
+ struct pc236_private *devpriv = dev->private;
+ bool retval = false;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->spinlock, flags);
+ if (devpriv->enable_irq) {
+ if (thisboard->intr_chk_clr_cb)
+ retval = thisboard->intr_chk_clr_cb(dev);
+ else
+ retval = true;
+ }
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+
+ return retval;
+}
+
+static int pc236_intr_insn(struct comedi_device *dev,
+ struct comedi_subdevice *s, struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = 0;
+ return insn->n;
+}
+
+static int pc236_intr_cmdtest(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
+{
+ int err = 0;
+
+ /* Step 1 : check if triggers are trivially valid */
+
+ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
+ err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
+ err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
+ err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
+ err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
+
+ if (err)
+ return 1;
+
+ /* Step 2a : make sure trigger sources are unique */
+ /* Step 2b : and mutually compatible */
+
+ if (err)
+ return 2;
+
+ /* Step 3: check it arguments are trivially valid */
+
+ err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+ err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
+
+ if (err)
+ return 3;
+
+ /* step 4: ignored */
+
+ if (err)
+ return 4;
+
+ return 0;
+}
+
+static int pc236_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+ pc236_intr_update(dev, true);
+
+ return 0;
+}
+
+static int pc236_intr_cancel(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ pc236_intr_update(dev, false);
+
+ return 0;
+}
+
+static irqreturn_t pc236_interrupt(int irq, void *d)
+{
+ struct comedi_device *dev = d;
+ struct comedi_subdevice *s = dev->read_subdev;
+ bool handled;
+
+ handled = pc236_intr_check(dev);
+ if (dev->attached && handled) {
+ comedi_buf_put(s, 0);
+ s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
+ comedi_event(dev, s);
+ }
+ return IRQ_RETVAL(handled);
+}
+
+int amplc_pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
+ unsigned int irq, unsigned long req_irq_flags)
+{
+ struct comedi_subdevice *s;
+ int ret;
+
+ dev->iobase = iobase;
+
+ ret = comedi_alloc_subdevices(dev, 2);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* digital i/o subdevice (8255) */
+ ret = subdev_8255_init(dev, s, NULL, iobase);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[1];
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_UNUSED;
+ pc236_intr_update(dev, false);
+ if (irq) {
+ if (request_irq(irq, pc236_interrupt, req_irq_flags,
+ dev->board_name, dev) >= 0) {
+ dev->irq = irq;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
+ s->n_chan = 1;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = pc236_intr_insn;
+ s->len_chanlist = 1;
+ s->do_cmdtest = pc236_intr_cmdtest;
+ s->do_cmd = pc236_intr_cmd;
+ s->cancel = pc236_intr_cancel;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(amplc_pc236_common_attach);
+
+static int __init amplc_pc236_common_init(void)
+{
+ return 0;
+}
+module_init(amplc_pc236_common_init);
+
+static void __exit amplc_pc236_common_exit(void)
+{
+}
+module_exit(amplc_pc236_common_exit);
+
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi helper for amplc_pc236 and amplc_pci236");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * comedi/drivers/amplc_pci236.c
+ * Driver for Amplicon PCI236 DIO boards.
+ *
+ * Copyright (C) 2002-2014 MEV Ltd. <http://www.mev.co.uk/>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Driver: amplc_pci236
+ * Description: Amplicon PCI236
+ * Author: Ian Abbott <abbotti@mev.co.uk>
+ * Devices: [Amplicon] PCI236 (amplc_pci236)
+ * Updated: Fri, 25 Jul 2014 15:32:40 +0000
+ * Status: works
+ *
+ * Configuration options:
+ * none
+ *
+ * Manual configuration of PCI board (PCI236) is not supported; it is
+ * configured automatically.
+ *
+ * The PCI236 board has a single 8255 appearing as subdevice 0.
+ *
+ * Subdevice 1 pretends to be a digital input device, but it always
+ * returns 0 when read. However, if you run a command with
+ * scan_begin_src=TRIG_EXT, a rising edge on port C bit 3 acts as an
+ * external trigger, which can be used to wake up tasks. This is like
+ * the comedi_parport device. If no interrupt is connected, then
+ * subdevice 1 is unused.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include "../comedidev.h"
+
+#include "amplc_pc236.h"
+#include "plx9052.h"
+
+/* Disable, and clear, interrupts */
+#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1POL | \
+ PLX9052_INTCSR_LI2POL | \
+ PLX9052_INTCSR_LI1SEL | \
+ PLX9052_INTCSR_LI1CLRINT)
+
+/* Enable, and clear, interrupts */
+#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB | \
+ PLX9052_INTCSR_LI1POL | \
+ PLX9052_INTCSR_LI2POL | \
+ PLX9052_INTCSR_PCIENAB | \
+ PLX9052_INTCSR_LI1SEL | \
+ PLX9052_INTCSR_LI1CLRINT)
+
+static void pci236_intr_update_cb(struct comedi_device *dev, bool enable)
+{
+ struct pc236_private *devpriv = dev->private;
+
+ /* this will also clear the "local interrupt 1" latch */
+ outl(enable ? PCI236_INTR_ENABLE : PCI236_INTR_DISABLE,
+ devpriv->lcr_iobase + PLX9052_INTCSR);
+}
+
+static bool pci236_intr_chk_clr_cb(struct comedi_device *dev)
+{
+ struct pc236_private *devpriv = dev->private;
+
+ /* check if interrupt occurred */
+ if (!(inl(devpriv->lcr_iobase + PLX9052_INTCSR) &
+ PLX9052_INTCSR_LI1STAT))
+ return false;
+ /* clear the interrupt */
+ pci236_intr_update_cb(dev, devpriv->enable_irq);
+ return true;
+}
+
+static const struct pc236_board pc236_pci_board = {
+ .name = "pci236",
+ .intr_update_cb = pci236_intr_update_cb,
+ .intr_chk_clr_cb = pci236_intr_chk_clr_cb,
+ .bustype = pci_bustype,
+};
+
+static int pci236_auto_attach(struct comedi_device *dev,
+ unsigned long context_unused)
+{
+ struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
+ struct pc236_private *devpriv;
+ unsigned long iobase;
+ int ret;
+
+ dev_info(dev->class_dev, "amplc_pci236: attach pci %s\n",
+ pci_name(pci_dev));
+
+ devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
+ if (!devpriv)
+ return -ENOMEM;
+
+ dev->board_ptr = &pc236_pci_board;
+ dev->board_name = pc236_pci_board.name;
+ ret = comedi_pci_enable(dev);
+ if (ret)
+ return ret;
+
+ devpriv->lcr_iobase = pci_resource_start(pci_dev, 1);
+ iobase = pci_resource_start(pci_dev, 2);
+ return amplc_pc236_common_attach(dev, iobase, pci_dev->irq,
+ IRQF_SHARED);
+}
+
+static void pci236_detach(struct comedi_device *dev)
+{
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ comedi_pci_disable(dev);
+}
+
+static struct comedi_driver amplc_pci236_driver = {
+ .driver_name = "amplc_pci236",
+ .module = THIS_MODULE,
+ .auto_attach = pci236_auto_attach,
+ .detach = pci236_detach,
+};
+
+static const struct pci_device_id pci236_pci_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, 0x0009) },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, pci236_pci_table);
+
+static int amplc_pci236_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ return comedi_pci_auto_config(dev, &lc_pci236_driver,
+ id->driver_data);
+}
+
+static struct pci_driver amplc_pci236_pci_driver = {
+ .name = "amplc_pci236",
+ .id_table = pci236_pci_table,
+ .probe = &lc_pci236_pci_probe,
+ .remove = comedi_pci_auto_unconfig,
+};
+
+module_comedi_pci_driver(amplc_pci236_driver, amplc_pci236_pci_driver);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi driver for Amplicon PCI236 DIO boards");
+MODULE_LICENSE("GPL");
projects / deliverable / linux.git / commitdiff
