+++ /dev/null
-#!/bin/sh
-# This is a shell archive.
-# Run the file through sh to extract its contents.
-# shar: Shell Archiver
-# Run the following text with /bin/sh to create:
-# Remote_Makefile
-# remote_gutils.c
-# remote_inflow.c
-# remote_server.c
-# remote_utils.c
-# This archive created: Fri Jun 23 17:06:55 1989
-cat << \SHAR_EOF > Remote_Makefile
-# Makefile for the remote server for GDB, the GNU debugger.
-# Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-#
-# This file is part of GDB.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-CFLAGS = -g
-CC = cc
-
-SERVER = remote_server.o\
- remote_inflow.o\
- remote_utils.o\
- remote_gutils.o
-
-prog : $(SERVER)
- $(CC) -g -o serve $(SERVER)
-SHAR_EOF
-cat << \SHAR_EOF > remote_gutils.c
-/* General utility routines for the remote server for GDB, the GNU debugger.
- Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include "defs.h"
-
-void error ();
-void fatal ();
-
-/* Chain of cleanup actions established with make_cleanup,
- to be executed if an error happens. */
-
-static struct cleanup *cleanup_chain;
-
-/* Nonzero means a quit has been requested. */
-
-int quit_flag;
-
-/* Nonzero means quit immediately if Control-C is typed now,
- rather than waiting until QUIT is executed. */
-
-int immediate_quit;
-\f
-/* Add a new cleanup to the cleanup_chain,
- and return the previous chain pointer
- to be passed later to do_cleanups or discard_cleanups.
- Args are FUNCTION to clean up with, and ARG to pass to it. */
-
-struct cleanup *
-make_cleanup (function, arg)
- void (*function) ();
- int arg;
-{
- register struct cleanup *new
- = (struct cleanup *) xmalloc (sizeof (struct cleanup));
- register struct cleanup *old_chain = cleanup_chain;
-
- new->next = cleanup_chain;
- new->function = function;
- new->arg = arg;
- cleanup_chain = new;
-
- return old_chain;
-}
-
-/* Discard cleanups and do the actions they describe
- until we get back to the point OLD_CHAIN in the cleanup_chain. */
-
-void
-do_cleanups (old_chain)
- register struct cleanup *old_chain;
-{
- register struct cleanup *ptr;
- while ((ptr = cleanup_chain) != old_chain)
- {
- (*ptr->function) (ptr->arg);
- cleanup_chain = ptr->next;
- free (ptr);
- }
-}
-
-/* Discard cleanups, not doing the actions they describe,
- until we get back to the point OLD_CHAIN in the cleanup_chain. */
-
-void
-discard_cleanups (old_chain)
- register struct cleanup *old_chain;
-{
- register struct cleanup *ptr;
- while ((ptr = cleanup_chain) != old_chain)
- {
- cleanup_chain = ptr->next;
- free (ptr);
- }
-}
-
-/* This function is useful for cleanups.
- Do
-
- foo = xmalloc (...);
- old_chain = make_cleanup (free_current_contents, &foo);
-
- to arrange to free the object thus allocated. */
-
-void
-free_current_contents (location)
- char **location;
-{
- free (*location);
-}
-\f
-/* Generally useful subroutines used throughout the program. */
-
-/* Like malloc but get error if no storage available. */
-
-char *
-xmalloc (size)
- long size;
-{
- register char *val = (char *) malloc (size);
- if (!val)
- fatal ("virtual memory exhausted.", 0);
- return val;
-}
-
-/* Like realloc but get error if no storage available. */
-
-char *
-xrealloc (ptr, size)
- char *ptr;
- long size;
-{
- register char *val = (char *) realloc (ptr, size);
- if (!val)
- fatal ("virtual memory exhausted.", 0);
- return val;
-}
-
-/* Print the system error message for errno, and also mention STRING
- as the file name for which the error was encountered.
- Then return to command level. */
-
-void
-perror_with_name (string)
- char *string;
-{
- extern int sys_nerr;
- extern char *sys_errlist[];
- extern int errno;
- char *err;
- char *combined;
-
- if (errno < sys_nerr)
- err = sys_errlist[errno];
- else
- err = "unknown error";
-
- combined = (char *) alloca (strlen (err) + strlen (string) + 3);
- strcpy (combined, string);
- strcat (combined, ": ");
- strcat (combined, err);
-
- error ("%s.", combined);
-}
-
-/* Print the system error message for ERRCODE, and also mention STRING
- as the file name for which the error was encountered. */
-
-void
-print_sys_errmsg (string, errcode)
- char *string;
- int errcode;
-{
- extern int sys_nerr;
- extern char *sys_errlist[];
- char *err;
- char *combined;
-
- if (errcode < sys_nerr)
- err = sys_errlist[errcode];
- else
- err = "unknown error";
-
- combined = (char *) alloca (strlen (err) + strlen (string) + 3);
- strcpy (combined, string);
- strcat (combined, ": ");
- strcat (combined, err);
-
- printf ("%s.\n", combined);
-}
-
-void
-quit ()
-{
- fflush (stdout);
- ioctl (fileno (stdout), TIOCFLUSH, 0);
- error ("Quit");
-}
-
-/* Control C comes here */
-
-void
-request_quit ()
-{
- quit_flag = 1;
- if (immediate_quit)
- quit ();
-}
-
-/* Print an error message and return to command level.
- STRING is the error message, used as a fprintf string,
- and ARG is passed as an argument to it. */
-
-void
-error (string, arg1, arg2, arg3)
- char *string;
- int arg1, arg2, arg3;
-{
- fflush (stdout);
- fprintf (stderr, string, arg1, arg2, arg3);
- fprintf (stderr, "\n");
- /************return_to_top_level ();************/
-}
-
-/* Print an error message and exit reporting failure.
- This is for a error that we cannot continue from.
- STRING and ARG are passed to fprintf. */
-
-void
-fatal (string, arg)
- char *string;
- int arg;
-{
- fprintf (stderr, "gdb: ");
- fprintf (stderr, string, arg);
- fprintf (stderr, "\n");
- exit (1);
-}
-
-/* Make a copy of the string at PTR with SIZE characters
- (and add a null character at the end in the copy).
- Uses malloc to get the space. Returns the address of the copy. */
-
-char *
-savestring (ptr, size)
- char *ptr;
- int size;
-{
- register char *p = (char *) xmalloc (size + 1);
- bcopy (ptr, p, size);
- p[size] = 0;
- return p;
-}
-
-void
-print_spaces (n, file)
- register int n;
- register FILE *file;
-{
- while (n-- > 0)
- fputc (' ', file);
-}
-
-/* Ask user a y-or-n question and return 1 iff answer is yes.
- Takes three args which are given to printf to print the question.
- The first, a control string, should end in "? ".
- It should not say how to answer, because we do that. */
-
-int
-query (ctlstr, arg1, arg2)
- char *ctlstr;
-{
- register int answer;
-
- /* Automatically answer "yes" if input is not from a terminal. */
- /***********if (!input_from_terminal_p ())
- return 1; *************************/
-
- while (1)
- {
- printf (ctlstr, arg1, arg2);
- printf ("(y or n) ");
- fflush (stdout);
- answer = fgetc (stdin);
- clearerr (stdin); /* in case of C-d */
- if (answer != '\n')
- while (fgetc (stdin) != '\n') clearerr (stdin);
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
- return 1;
- if (answer == 'N')
- return 0;
- printf ("Please answer y or n.\n");
- }
-}
-\f
-/* Parse a C escape sequence. STRING_PTR points to a variable
- containing a pointer to the string to parse. That pointer
- is updated past the characters we use. The value of the
- escape sequence is returned.
-
- A negative value means the sequence \ newline was seen,
- which is supposed to be equivalent to nothing at all.
-
- If \ is followed by a null character, we return a negative
- value and leave the string pointer pointing at the null character.
-
- If \ is followed by 000, we return 0 and leave the string pointer
- after the zeros. A value of 0 does not mean end of string. */
-
-int
-parse_escape (string_ptr)
- char **string_ptr;
-{
- register int c = *(*string_ptr)++;
- switch (c)
- {
- case 'a':
- return '\a';
- case 'b':
- return '\b';
- case 'e':
- return 033;
- case 'f':
- return '\f';
- case 'n':
- return '\n';
- case 'r':
- return '\r';
- case 't':
- return '\t';
- case 'v':
- return '\v';
- case '\n':
- return -2;
- case 0:
- (*string_ptr)--;
- return 0;
- case '^':
- c = *(*string_ptr)++;
- if (c == '\\')
- c = parse_escape (string_ptr);
- if (c == '?')
- return 0177;
- return (c & 0200) | (c & 037);
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- {
- register int i = c - '0';
- register int count = 0;
- while (++count < 3)
- {
- if ((c = *(*string_ptr)++) >= '0' && c <= '7')
- {
- i *= 8;
- i += c - '0';
- }
- else
- {
- (*string_ptr)--;
- break;
- }
- }
- return i;
- }
- default:
- return c;
- }
-}
-\f
-void
-printchar (ch, stream)
- unsigned char ch;
- FILE *stream;
-{
- register int c = ch;
- if (c < 040 || c >= 0177)
- {
- if (c == '\n')
- fprintf (stream, "\\n");
- else if (c == '\b')
- fprintf (stream, "\\b");
- else if (c == '\t')
- fprintf (stream, "\\t");
- else if (c == '\f')
- fprintf (stream, "\\f");
- else if (c == '\r')
- fprintf (stream, "\\r");
- else if (c == 033)
- fprintf (stream, "\\e");
- else if (c == '\a')
- fprintf (stream, "\\a");
- else
- fprintf (stream, "\\%03o", c);
- }
- else
- {
- if (c == '\\' || c == '"' || c == '\'')
- fputc ('\\', stream);
- fputc (c, stream);
- }
-}
-SHAR_EOF
-cat << \SHAR_EOF > remote_inflow.c
-/* Low level interface to ptrace, for GDB when running under Unix.
- Copyright (C) 1986, 1987 Free Software Foundation, Inc.
-*/
-
-#include "defs.h"
-#include "param.h"
-#include "wait.h"
-#include "frame.h"
-#include "inferior.h"
-/***************************
-#include "initialize.h"
-****************************/
-
-#include <stdio.h>
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <sgtty.h>
-#include <fcntl.h>
-
-/***************Begin MY defs*********************/
-int quit_flag = 0;
-char registers[REGISTER_BYTES];
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-
-char buf2[MAX_REGISTER_RAW_SIZE];
-/***************End MY defs*********************/
-
-#ifdef NEW_SUN_PTRACE
-#include <sys/ptrace.h>
-#include <machine/reg.h>
-#endif
-
-extern char **environ;
-extern int errno;
-extern int inferior_pid;
-void error(), quit(), perror_with_name();
-int query();
-void supply_register(), write_register();
-CORE_ADDR read_register();
-
-/* Nonzero if we are debugging an attached outside process
- rather than an inferior. */
-
-
-/* Start an inferior process and returns its pid.
- ALLARGS is a vector of program-name and args.
- ENV is the environment vector to pass. */
-
-int
-create_inferior (allargs, env)
- char **allargs;
- char **env;
-{
- int pid;
- extern int sys_nerr;
- extern char *sys_errlist[];
- extern int errno;
-
- /* exec is said to fail if the executable is open. */
- /****************close_exec_file ();*****************/
-
- pid = vfork ();
- if (pid < 0)
- perror_with_name ("vfork");
-
- if (pid == 0)
- {
- /* Run inferior in a separate process group. */
- setpgrp (getpid (), getpid ());
-
-/* Not needed on Sun, at least, and loses there
- because it clobbers the superior. */
-/*??? signal (SIGQUIT, SIG_DFL);
- signal (SIGINT, SIG_DFL); */
-
- errno = 0;
- ptrace (0);
-
- execle ("/bin/sh", "sh", "-c", allargs, 0, env);
-
- fprintf (stderr, "Cannot exec /bin/sh: %s.\n",
- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
- fflush (stderr);
- _exit (0177);
- }
- return pid;
-}
-
-/* Kill the inferior process. Make us have no inferior. */
-
-kill_inferior ()
-{
- if (inferior_pid == 0)
- return;
- ptrace (8, inferior_pid, 0, 0);
- wait (0);
- /*************inferior_died ();****VK**************/
-}
-
-/* Resume execution of the inferior process.
- If STEP is nonzero, single-step it.
- If SIGNAL is nonzero, give it that signal. */
-
-unsigned char
-resume (step, signal,status)
- int step;
- int signal;
- char *status;
-{
- int pid ;
- WAITTYPE w;
-
- errno = 0;
- ptrace (step ? 9 : 7, inferior_pid, 1, signal);
- if (errno)
- perror_with_name ("ptrace");
- pid = wait(&w);
- if(pid != inferior_pid)
- perror_with_name ("wait");
-
- if(WIFEXITED(w))
- {
- printf("\nchild exited with retcode = %x \n",WRETCODE(w));
- *status = 'E';
- return((unsigned char) WRETCODE(w));
- }
- else if(!WIFSTOPPED(w))
- {
- printf("\nchild did terminated with signal = %x \n",WTERMSIG(w));
- *status = 'T';
- return((unsigned char) WTERMSIG(w));
- }
- else
- {
- printf("\nchild stopped with signal = %x \n",WSTOPSIG(w));
- *status = 'S';
- return((unsigned char) WSTOPSIG(w));
- }
-
-}
-
-
-#ifdef NEW_SUN_PTRACE
-
-void
-fetch_inferior_registers ()
-{
- struct regs inferior_registers;
- struct fp_status inferior_fp_registers;
- extern char registers[];
-
- ptrace (PTRACE_GETREGS, inferior_pid, &inferior_registers);
- if (errno)
- perror_with_name ("ptrace");
- /**********debugging begin **********/
- print_some_registers(&inferior_registers);
- /**********debugging end **********/
- ptrace (PTRACE_GETFPREGS, inferior_pid, &inferior_fp_registers);
- if (errno)
- perror_with_name ("ptrace");
-
- bcopy (&inferior_registers, registers, 16 * 4);
- bcopy (&inferior_fp_registers, ®isters[REGISTER_BYTE (FP0_REGNUM)],
- sizeof inferior_fp_registers.fps_regs);
- *(int *)®isters[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
- *(int *)®isters[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
- bcopy (&inferior_fp_registers.fps_control,
- ®isters[REGISTER_BYTE (FPC_REGNUM)],
- sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-}
-
-/* Store our register values back into the inferior.
- If REGNO is -1, do this for all registers.
- Otherwise, REGNO specifies which register (so we can save time). */
-
-store_inferior_registers (regno)
- int regno;
-{
- struct regs inferior_registers;
- struct fp_status inferior_fp_registers;
- extern char registers[];
-
- bcopy (registers, &inferior_registers, 16 * 4);
- bcopy (®isters[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
- sizeof inferior_fp_registers.fps_regs);
- inferior_registers.r_ps = *(int *)®isters[REGISTER_BYTE (PS_REGNUM)];
- inferior_registers.r_pc = *(int *)®isters[REGISTER_BYTE (PC_REGNUM)];
- bcopy (®isters[REGISTER_BYTE (FPC_REGNUM)],
- &inferior_fp_registers.fps_control,
- sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-
- ptrace (PTRACE_SETREGS, inferior_pid, &inferior_registers);
- if (errno)
- perror_with_name ("ptrace");
- ptrace (PTRACE_SETFPREGS, inferior_pid, &inferior_fp_registers);
- if (errno)
- perror_with_name ("ptrace");
-}
-
-#endif /* not NEW_SUN_PTRACE */
-
-
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
- in the NEW_SUN_PTRACE case.
- It ought to be straightforward. But it appears that writing did
- not write the data that I specified. I cannot understand where
- it got the data that it actually did write. */
-
-/* Copy LEN bytes from inferior's memory starting at MEMADDR
- to debugger memory starting at MYADDR. */
-
-read_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & - sizeof (int);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
- /* Allocate buffer of that many longwords. */
- register int *buffer = (int *) alloca (count * sizeof (int));
-
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (int))
- {
- buffer[i] = ptrace (1, inferior_pid, addr, 0);
- }
-
- /* Copy appropriate bytes out of the buffer. */
- bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-}
-
-/* Copy LEN bytes of data from debugger memory at MYADDR
- to inferior's memory at MEMADDR.
- On failure (cannot write the inferior)
- returns the value of errno. */
-
-int
-write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & - sizeof (int);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
- /* Allocate buffer of that many longwords. */
- register int *buffer = (int *) alloca (count * sizeof (int));
- extern int errno;
-
- /* Fill start and end extra bytes of buffer with existing memory data. */
-
- buffer[0] = ptrace (1, inferior_pid, addr, 0);
-
- if (count > 1)
- {
- buffer[count - 1]
- = ptrace (1, inferior_pid,
- addr + (count - 1) * sizeof (int), 0);
- }
-
- /* Copy data to be written over corresponding part of buffer */
-
- bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
- /* Write the entire buffer. */
-
- for (i = 0; i < count; i++, addr += sizeof (int))
- {
- errno = 0;
- ptrace (4, inferior_pid, addr, buffer[i]);
- if (errno)
- return errno;
- }
-
- return 0;
-}
-\f
-void
-try_writing_regs_command ()
-{
- register int i;
- register int value;
- extern int errno;
-
- if (inferior_pid == 0)
- error ("There is no inferior process now.");
-
- fetch_inferior_registers();
- for (i = 0;i<18 ; i ++)
- {
- QUIT;
- errno = 0;
- value = read_register(i);
- write_register ( i, value);
- if (errno == 0)
- {
- printf (" Succeeded with register %d; value 0x%x (%d).\n",
- i, value, value);
- }
- else
- printf (" Failed with register %d.\n", i);
- }
-}
-
-void
-initialize ()
-{
-
- inferior_pid = 0;
-
-
-}
-
-
-/* Return the contents of register REGNO,
- regarding it as an integer. */
-
-CORE_ADDR
-read_register (regno)
- int regno;
-{
- /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */
- return *(int *) ®isters[REGISTER_BYTE (regno)];
-}
-
-/* Store VALUE in the register number REGNO, regarded as an integer. */
-
-void
-write_register (regno, val)
- int regno, val;
-{
- /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */
- *(int *) ®isters[REGISTER_BYTE (regno)] = val;
-
- if (have_inferior_p ())
- store_inferior_registers (regno);
-}
-
-
-int
-have_inferior_p ()
-{
- return inferior_pid != 0;
-}
-
-print_some_registers(regs)
-int regs[];
-{
- register int i;
- for (i = 0; i < 18; i++) {
- printf("reg[%d] = %x\n", i, regs[i]);
- }
-}
-
-SHAR_EOF
-cat << \SHAR_EOF > remote_server.c
-/* Main code for remote server for GDB, the GNU Debugger.
- Copyright (C) 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-#include "param.h"
-#include <stdio.h>
-
-void read_inferior_memory(), fetch_inferior_registers();
-unsigned char resume();
-void kill_inferior();
-void initialize(), try_writing_regs_command();
-int create_inferior(), read_register();
-
-extern char registers[];
-int inferior_pid;
-extern char **environ;
-
-/* Descriptor for I/O to remote machine. */
-int remote_desc;
-int kiodebug = 0;
-int remote_debugging;
-
-void remote_send ();
-void putpkt ();
-void getpkt ();
-void remote_open();
-void write_ok();
-void write_enn();
-void convert_ascii_to_int();
-void convert_int_to_ascii();
-void prepare_resume_reply();
-void decode_m_packet();
-void decode_M_packet();
-
-
-main(argc,argv)
-int argc; char *argv[];
-{
- char ch,status, own_buf[2000], mem_buf[2000];
- int i=0;
- unsigned char signal;
- unsigned int mem_addr, len;
-
- initialize();
- printf("\nwill open serial link\n");
- remote_open("/dev/ttya",0);
-
- if(argc < 2)
- {
- printf("Enter name of program to be run with command line args\n");
- gets(own_buf);
- inferior_pid = create_inferior(own_buf,environ);
- printf("\nProcess %s created; pid = %d\n",own_buf,inferior_pid);
- }
- else
- {
- inferior_pid = create_inferior(argv[1],environ);
- printf("\nProcess %s created; pid = %d\n",argv[1],inferior_pid);
- }
-
- do {
- getpkt(own_buf);
- printf("\nPacket received is>:%s\n",own_buf);
- i = 0;
- ch = own_buf[i++];
- switch (ch) {
- case 'h': /**********This is only for tweaking the gdb+ program *******/
- signal = resume(1,0,&status);
- prepare_resume_reply(own_buf,status,signal);
- break;
- /*************end tweak*************************************/
-
- case 'g': fetch_inferior_registers();
- convert_int_to_ascii(registers,own_buf,REGISTER_BYTES);
- break;
- case 'G': convert_ascii_to_int(&own_buf[1],registers,REGISTER_BYTES);
- if(store_inferior_registers(-1)==0)
- write_ok(own_buf);
- else
- write_enn(own_buf);
- break;
- case 'm': decode_m_packet(&own_buf[1],&mem_addr,&len);
- read_inferior_memory(mem_addr,mem_buf,len);
- convert_int_to_ascii(mem_buf,own_buf,len);
- break;
- case 'M': decode_M_packet(&own_buf[1],&mem_addr,&len,mem_buf);
- if(write_inferior_memory(mem_addr,mem_buf,len)==0)
- write_ok(own_buf);
- else
- write_enn(own_buf);
- break;
- case 'c': signal = resume(0,0,&status);
- printf("\nSignal received is >: %0x \n",signal);
- prepare_resume_reply(own_buf,status,signal);
- break;
- case 's': signal = resume(1,0,&status);
- prepare_resume_reply(own_buf,status,signal);
- break;
- case 'k': kill_inferior();
- sprintf(own_buf,"q");
- putpkt(own_buf);
- printf("\nObtained kill request...terminating\n");
- close(remote_desc);
- exit(0);
- case 't': try_writing_regs_command();
- own_buf[0] = '\0';
- break;
- default : printf("\nUnknown option chosen by master\n");
- write_enn(own_buf);
- break;
- }
-
- putpkt(own_buf);
- } while(1) ;
-
- close(remote_desc);
- /** now get out of here**/
- printf("\nFinished reading data from serial link - Bye!\n");
- exit(0);
-
-}
-
-SHAR_EOF
-cat << \SHAR_EOF > remote_utils.c
-/* Remote utility routines for the remote server for GDB, the GNU debugger.
- Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-#include "param.h"
-#include <stdio.h>
-#include <signal.h>
-#include <sys/wait.h>
-#include <sys/ioctl.h>
-#include <a.out.h>
-#include <sys/file.h>
-#include <sgtty.h>
-
-extern int remote_desc;
-extern int remote_debugging;
-extern int kiodebug;
-
-void remote_open();
-void remote_send();
-void putpkt();
-void getpkt();
-
-void write_ok();
-void write_enn();
-void convert_ascii_to_int();
-void convert_int_to_ascii();
-void prepare_resume_reply();
-
-/* Open a connection to a remote debugger.
- NAME is the filename used for communication. */
-
-void
-remote_open (name, from_tty)
- char *name;
- int from_tty;
-{
- struct sgttyb sg;
-
- remote_debugging = 0;
-
- remote_desc = open (name, O_RDWR);
- if (remote_desc < 0)
- printf("\ncould not open remote device\n");
-
- ioctl (remote_desc, TIOCGETP, &sg);
- sg.sg_flags = RAW;
- ioctl (remote_desc, TIOCSETP, &sg);
-
- if (from_tty)
- printf ("Remote debugging using %s\n", name);
- remote_debugging = 1;
-}
-
-/* Convert hex digit A to a number. */
-
-static int
-fromhex (a)
- int a;
-{
- if (a >= '0' && a <= '9')
- return a - '0';
- else if (a >= 'a' && a <= 'f')
- return a - 'a' + 10;
- else
- perror ("Reply contains invalid hex digit");
-}
-
-/* Convert number NIB to a hex digit. */
-
-static int
-tohex (nib)
- int nib;
-{
- if (nib < 10)
- return '0'+nib;
- else
- return 'a'+nib-10;
-}
-
-/* Send the command in BUF to the remote machine,
- and read the reply into BUF.
- Report an error if we get an error reply. */
-
-void
-remote_send (buf)
- char *buf;
-{
- putpkt (buf);
- getpkt (buf);
-
- if (buf[0] == 'E')
- perror ("Remote failure reply: %s", buf);
-}
-
-/* Send a packet to the remote machine, with error checking.
- The data of the packet is in BUF. */
-
-void
-putpkt (buf)
- char *buf;
-{
- int i;
- unsigned char csum = 0;
- char buf2[500];
- char buf3[1];
- int cnt = strlen (buf);
- char *p;
-
- if (kiodebug)
- fprintf (stderr, "Sending packet: %s\n", buf);
-
- /* Copy the packet into buffer BUF2, encapsulating it
- and giving it a checksum. */
-
- p = buf2;
- *p++ = '$';
-
- for (i = 0; i < cnt; i++)
- {
- csum += buf[i];
- *p++ = buf[i];
- }
- *p++ = '#';
- *p++ = tohex ((csum >> 4) & 0xf);
- *p++ = tohex (csum & 0xf);
-
- /* Send it over and over until we get a positive ack. */
-
- do {
- write (remote_desc, buf2, p - buf2);
- read (remote_desc, buf3, 1);
- } while (buf3[0] != '+');
-}
-
-static int
-readchar ()
-{
- char buf[1];
- while (read (remote_desc, buf, 1) != 1) ;
- return buf[0] & 0x7f;
-}
-
-/* Read a packet from the remote machine, with error checking,
- and store it in BUF. */
-
-void
-getpkt (buf)
- char *buf;
-{
- char *bp;
- unsigned char csum, c, c1, c2;
- extern kiodebug;
-
- while (1)
- {
- csum = 0;
- while ((c = readchar()) != '$');
-
- bp = buf;
- while (1)
- {
- c = readchar ();
- if (c == '#')
- break;
- *bp++ = c;
- csum += c;
- }
- *bp = 0;
-
- c1 = fromhex (readchar ());
- c2 = fromhex (readchar ());
- if (csum == (c1 << 4) + c2)
- break;
-
- printf ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s\n",
- (c1 << 4) + c2, csum, buf);
- write (remote_desc, "-", 1);
- }
-
- write (remote_desc, "+", 1);
-
- if (kiodebug)
- fprintf (stderr,"Packet received :%s\n", buf);
-}
-
-
-void
-write_ok(buf)
- char *buf;
-{
- buf[0] = 'O';
- buf[1] = 'k';
- buf[2] = '\0';
-}
-
-void
-write_enn(buf)
- char *buf;
-{
- buf[0] = 'E';
- buf[1] = 'N';
- buf[2] = 'N';
- buf[3] = '\0';
-}
-
-void
-convert_int_to_ascii(from,to,n)
-char *from, *to; int n;
-{
- int nib ;
- char ch;
- while( n-- )
- {
- ch = *from++;
- nib = ((ch & 0xf0) >> 4)& 0x0f;
- *to++ = tohex(nib);
- nib = ch & 0x0f;
- *to++ = tohex(nib);
- }
- *to++ = 0;
-}
-
-
-void
-convert_ascii_to_int(from,to,n)
-char *from, *to; int n;
-{
- int nib1,nib2 ;
- while( n-- )
- {
- nib1 = fromhex(*from++);
- nib2 = fromhex(*from++);
- *to++ = (((nib1 & 0x0f)<< 4)& 0xf0) | (nib2 & 0x0f);
- }
-}
-
-void
-prepare_resume_reply(buf,status,signal)
-char *buf ,status;
-unsigned char signal;
-{
- int nib;
- char ch;
-
- *buf++ = 'S';
- *buf++ = status;
- nib = ((signal & 0xf0) >> 4) ;
- *buf++ = tohex(nib);
- nib = signal & 0x0f;
- *buf++ = tohex(nib);
- *buf++ = 0;
-}
-
-void
-decode_m_packet(from,mem_addr_ptr,len_ptr)
-char *from;
-unsigned int *mem_addr_ptr, *len_ptr;
-{
- int i = 0, j = 0 ;
- char ch;
- *mem_addr_ptr = *len_ptr = 0;
- /************debugging begin************/
- printf("\nIn decode_m_packet");
- /************debugging end************/
-
- while((ch = from[i++]) != ',')
- {
- *mem_addr_ptr = *mem_addr_ptr << 4;
- *mem_addr_ptr |= fromhex(ch) & 0x0f;
- }
- /************debugging begin************/
- printf("\nFinished mem_addr part");
- /************debugging end************/
-
- for(j=0; j < 4; j++)
- {
- if((ch = from[i++]) == 0)
- break;
- *len_ptr = *len_ptr << 4;
- *len_ptr |= fromhex(ch) & 0x0f;
- }
- /************debugging begin************/
- printf("\nFinished len_ptr part");
- /************debugging end************/
-}
-
-void
-decode_M_packet(from,mem_addr_ptr,len_ptr,to)
-char *from, *to;
-unsigned int *mem_addr_ptr, *len_ptr;
-{
- int i = 0, j = 0 ;
- char ch;
- *mem_addr_ptr = *len_ptr = 0;
- /************debugging begin************/
- printf("\nIn decode_M_packet");
- /************debugging end************/
-
- while((ch = from[i++]) != ',')
- {
- *mem_addr_ptr = *mem_addr_ptr << 4;
- *mem_addr_ptr |= fromhex(ch) & 0x0f;
- }
- /************debugging begin************/
- printf("\nFinished mem_addr part: memaddr = %x",*mem_addr_ptr);
- /************debugging end************/
-
- while((ch = from[i++]) != ':')
- {
- *len_ptr = *len_ptr << 4;
- *len_ptr |= fromhex(ch) & 0x0f;
- }
- /************debugging begin************/
- printf("\nFinished len_ptr part: len = %d",*len_ptr);
- /************debugging end************/
-
- convert_ascii_to_int(&from[i++],to,*len_ptr);
-
- /************debugging begin************/
- printf("\nmembuf : %x",*(int *)to);
- /************debugging end************/
-}
-
-SHAR_EOF
-# End of shell archive
-exit 0
projects / deliverable / binutils-gdb.git / commitdiff
