# quilt's files
patches
series
+
+# cscope files
+cscope.*
S: USA
N: Lennert Buytenhek
-E: buytenh@gnu.org
-D: Rewrite of the ethernet bridging code
-S: Ravenhorst 58B
+E: kernel@wantstofly.org
+D: Original (2.4) rewrite of the ethernet bridging code
+D: Various ARM bits and pieces
+S: Ravenhorst 58
S: 2317 AK Leiden
S: The Netherlands
S: Spain
N: Linus Torvalds
-E: torvalds@osdl.org
+E: torvalds@linux-foundation.org
D: Original kernel hacker
S: 12725 SW Millikan Way, Suite 400
S: Beaverton, Oregon 97005
NULL or the ERR_PTR mechanism to report failure.
+ Chapter 17: Don't re-invent the kernel macros
+
+The header file include/linux/kernel.h contains a number of macros that
+you should use, rather than explicitly coding some variant of them yourself.
+For example, if you need to calculate the length of an array, take advantage
+of the macro
+
+ #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+Similarly, if you need to calculate the size of some structure member, use
+
+ #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+
+There are also min() and max() macros that do strict type checking if you
+need them. Feel free to peruse that header file to see what else is already
+defined that you shouldn't reproduce in your code.
+
+
Appendix I: References
###
#External programs used
-KERNELDOC = scripts/kernel-doc
-DOCPROC = scripts/basic/docproc
+KERNELDOC = $(srctree)/scripts/kernel-doc
+DOCPROC = $(objtree)/scripts/basic/docproc
XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
#XMLTOFLAGS += --skip-validation
</chapter>
<chapter id="ataExceptions">
- <title>ATA errors & exceptions</title>
+ <title>ATA errors and exceptions</title>
<para>
This chapter tries to identify what error/exception conditions exist
If the new code is substantial, addition of subsystem-specific fault
injection might be appropriate.
+
+22: Newly-added code has been compiled with `gcc -W'. This will generate
+ lots of noise, but is good for finding bugs like "warning: comparison
+ between signed and unsigned".
Linus Torvalds is the final arbiter of all changes accepted into the
-Linux kernel. His e-mail address is <torvalds@osdl.org>. He gets
-a lot of e-mail, so typically you should do your best to -avoid- sending
-him e-mail.
+Linux kernel. His e-mail address is <torvalds@linux-foundation.org>.
+He gets a lot of e-mail, so typically you should do your best to -avoid-
+sending him e-mail.
Patches which are bug fixes, are "obvious" changes, or similarly
require little discussion should be sent or CC'd to Linus. Patches
A S3C2410 based PDA from Acer. There is a Wiki page at
http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+ AML M5900
+
+ American Microsystems' M5900
+
+ Nex Vision Nexcoder
+ Nex Vision Otom
+
+ Two machines by Nex Vision
+
Adding New Machines
-------------------
Support for the onboard RTC unit, including alarm function.
+ This has recently been upgraded to use the new RTC core,
+ and the module has been renamed to rtc-s3c to fit in with
+ the new rtc naming scheme.
+
Watchdog
--------
The current kernels now have support for the s3c2410 NAND
controller. If there are any problems the latest linux-mtd
- CVS can be found from http://www.linux-mtd.infradead.org/
+ code can be found from http://www.linux-mtd.infradead.org/
Serial
See Suspend.txt for more information.
+SPI
+---
+
+ SPI drivers are available for both the in-built hardware
+ (although there is no DMA support yet) and a generic
+ GPIO based solution.
+
+
+LEDs
+----
+
+ There is support for GPIO based LEDs via a platform driver
+ in the LED subsystem.
+
+
Platform Data
-------------
scheduler for example, to reposition the request
if its sorting order has changed.
+elevator_allow_merge_fn called whenever the block layer determines
+ that a bio can be merged into an existing
+ request safely. The io scheduler may still
+ want to stop a merge at this point if it
+ results in some sort of conflict internally,
+ this hook allows it to do that.
+
elevator_dispatch_fn fills the dispatch queue with ready requests.
I/O schedulers are free to postpone requests by
not filling the dispatch queue unless @force
likely that you will need to flush the instruction cache
for copy_to_user_page().
- void flush_anon_page(struct page *page, unsigned long vmaddr)
+ void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long vmaddr)
When the kernel needs to access the contents of an anonymous
page, it calls this function (currently only
get_user_pages()). Note: flush_dcache_page() deliberately
doesn't work for an anonymous page. The default
implementation is a nop (and should remain so for all coherent
architectures). For incoherent architectures, it should flush
- the cache of the page at vmaddr in the current user process.
+ the cache of the page at vmaddr.
void flush_kernel_dcache_page(struct page *page)
When the kernel needs to modify a user page is has obtained
---------------------------
+What: i2c_adapter.dev
+ i2c_adapter.list
+When: July 2007
+Why: Superfluous, given i2c_adapter.class_dev:
+ * The "dev" was a stand-in for the physical device node that legacy
+ drivers would not have; but now it's almost always present. Any
+ remaining legacy drivers must upgrade (they now trigger warnings).
+ * The "list" duplicates class device children.
+ The delay in removing this is so upgraded lm_sensors and libsensors
+ can get deployed. (Removal causes minor changes in the sysfs layout,
+ notably the location of the adapter type name and parenting the i2c
+ client hardware directly from their controller.)
+Who: Jean Delvare <khali@linux-fr.org>,
+ David Brownell <dbrownell@users.sourceforge.net>
+
+---------------------------
+
What: IPv4 only connection tracking/NAT/helpers
When: 2.6.22
Why: The new layer 3 independant connection tracking replaces the old
Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---------------------------
+
+What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
+When: 2.6.21
+Why: hotkey.c was an attempt to consolidate multiple drivers that use
+ ACPI to implement hotkeys. However, hotkeys are not documented
+ in the ACPI specification, so the drivers used undocumented
+ vendor-specific hooks and turned out to be more different than
+ the same.
+
+ Further, the keys and the features supplied by each platform
+ are different, so there will always be a need for
+ platform-specific drivers.
+
+ So the new plan is to delete hotkey.c and instead, work on the
+ platform specific drivers to try to make them look the same
+ to the user when they supply the same features.
+
+ hotkey.c has always depended on CONFIG_EXPERIMENTAL
+
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: /sys/firmware/acpi/namespace
+When: 2.6.21
+Why: The ACPI namespace is effectively the symbol list for
+ the BIOS. The device names are completely arbitrary
+ and have no place being exposed to user-space.
+
+ For those interested in the BIOS ACPI namespace,
+ the BIOS can be extracted and disassembled with acpidump
+ and iasl as documented in the pmtools package here:
+ http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
+
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: JFFS (version 1)
+When: 2.6.21
+Why: Unmaintained for years, superceded by JFFS2 for years.
+Who: Jeff Garzik <jeff@garzik.org>
+
+---------------------------
RESOURCES
=========
-The Linux version of the 9p server is now maintained under the npfs project
-on sourceforge (http://sourceforge.net/projects/npfs).
+Our current recommendation is to use Inferno (http://www.vitanuova.com/inferno)
+as the 9p server. You can start a 9p server under Inferno by issuing the
+following command:
+ ; styxlisten -A tcp!*!564 export '#U*'
+
+The -A specifies an unauthenticated export. The 564 is the port # (you may
+have to choose a higher port number if running as a normal user). The '#U*'
+specifies exporting the root of the Linux name space. You may specify a
+subset of the namespace by extending the path: '#U*'/tmp would just export
+/tmp. For more information, see the Inferno manual pages covering styxlisten
+and export.
+
+A Linux version of the 9p server is now maintained under the npfs project
+on sourceforge (http://sourceforge.net/projects/npfs). There is also a
+more stable single-threaded version of the server (named spfs) available from
+the same CVS repository.
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
The 2.6 kernel support is working on PPC and x86.
-PLEASE USE THE SOURCEFORGE BUG-TRACKER TO REPORT PROBLEMS.
+PLEASE USE THE KERNEL BUGZILLA TO REPORT PROBLEMS. (http://bugzilla.kernel.org)
int (*releasepage) (struct page *, int);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
+ int (*launder_page) (struct page *);
locking rules:
All except set_page_dirty may block
invalidatepage: no yes
releasepage: no yes
direct_IO: no
+launder_page: no yes
->prepare_write(), ->commit_write(), ->sync_page() and ->readpage()
may be called from the request handler (/dev/loop).
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
+ ->launder_page() may be called prior to releasing a page if
+it is still found to be dirty. It returns zero if the page was successfully
+cleaned, or an error value if not. Note that in order to prevent the page
+getting mapped back in and redirtied, it needs to be kept locked
+across the entire operation.
+
Note: currently almost all instances of address_space methods are
using BKL for internal serialization and that's one of the worst sources
of contention. Normally they are calling library functions (in fs/buffer.c)
filesystem is free to implement it's access policy or leave it to
the underlying file access mechanism (e.g. in case of network
filesystems). This option enables permission checking, restricting
- access based on file mode. This is option is usually useful
- together with the 'allow_other' mount option.
+ access based on file mode. It is usually useful together with the
+ 'allow_other' mount option.
'allow_other'
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.28:
+ - Fix a deadlock.
2.1.27:
- Implement page migration support so the kernel can move memory used
by NTFS files and directories around for management purposes.
temp5-6 have a 1 degree Celsiis resolution.
* Temperature sensor types
- Temp1-4 have 3 possible types. It can be read from (and written to)
+ Temp1-4 have 2 possible types. It can be read from (and written to)
temp[1-4]_type.
- - If the value of 0, the related temperature channel stops
- monitoring.
- If the value is 3, it starts monitoring using a remote termal diode
(default).
- - If the value is 5, it starts monitoring using the temperature sensor
- in AMD CPU and get result by AMDSI.
- If the value is 6, it starts monitoring using the temperature sensor
in Intel CPU and get result by PECI.
Temp5-6 can be connected to external thermistors (value of
- temp[5-6]_type is 4). They can also be disabled (value is 0).
+ temp[5-6]_type is 4).
* Alarm mechanism
For voltage sensors, an alarm triggers if the measured value is below
----------------------------
H. Peter Anvin <hpa@zytor.com>
- Last update 2006-11-17
+ Last update 2007-01-26
On the i386 platform, the Linux kernel uses a rather complicated boot
convention. This has evolved partially due to historical aspects, as
7 GRuB
8 U-BOOT
9 Xen
+ A Gujin
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
Most ThinkPads include six or more separate temperature sensors but
only expose the CPU temperature through the standard ACPI methods.
-This feature shows readings from up to eight different sensors. Some
-readings may not be valid, e.g. may show large negative values. For
-example, on the X40, a typical output may be:
+This feature shows readings from up to eight different sensors on older
+ThinkPads, and it has experimental support for up to sixteen different
+sensors on newer ThinkPads. Readings from sensors that are not available
+return -128.
+No commands can be written to this file.
+
+EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
+implementation directly accesses hardware registers and may not work as
+expected. USE WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module. When EXPERIMENTAL
+mode is enabled, reading the first 8 sensors on newer ThinkPads will
+also use an new experimental thermal sensor access mode.
+
+For example, on the X40, a typical output may be:
temperatures: 42 42 45 41 36 -128 33 -128
-Thomas Gruber took his R51 apart and traced all six active sensors in
-his laptop (the location of sensors may vary on other models):
+EXPERIMENTAL: On the T43/p, a typical output may be:
+temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
+
+The mapping of thermal sensors to physical locations varies depending on
+system-board model (and thus, on ThinkPad model).
+
+http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
+tries to track down these locations for various models.
+
+Most (newer?) models seem to follow this pattern:
1: CPU
-2: Mini PCI Module
-3: HDD
+2: (depends on model)
+3: (depends on model)
4: GPU
-5: Battery
-6: N/A
-7: Battery
-8: N/A
+5: Main battery: main sensor
+6: Bay battery: main sensor
+7: Main battery: secondary sensor
+8: Bay battery: secondary sensor
+9-15: (depends on model)
+
+For the R51 (source: Thomas Gruber):
+2: Mini-PCI
+3: Internal HDD
+
+For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
+http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
+2: System board, left side (near PCMCIA slot), reported as HDAPS temp
+3: PCMCIA slot
+9: MCH (northbridge) to DRAM Bus
+10: ICH (southbridge), under Mini-PCI card, under touchpad
+11: Power regulator, underside of system board, below F2 key
+
+The A31 has a very atypical layout for the thermal sensors
+(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
+1: CPU
+2: Main Battery: main sensor
+3: Power Converter
+4: Bay Battery: main sensor
+5: MCH (northbridge)
+6: PCMCIA/ambient
+7: Main Battery: secondary sensor
+8: Bay Battery: secondary sensor
-No commands can be written to this file.
EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
-This feature attempts to show the current fan speed. The speed is read
-directly from the hardware registers of the embedded controller. This
-is known to work on later R, T and X series ThinkPads but may show a
-bogus value on other models.
+This feature attempts to show the current fan speed, control mode and
+other fan data that might be available. The speed is read directly
+from the hardware registers of the embedded controller. This is known
+to work on later R, T and X series ThinkPads but may show a bogus
+value on other models.
+
+Most ThinkPad fans work in "levels". Level 0 stops the fan. The higher
+the level, the higher the fan speed, although adjacent levels often map
+to the same fan speed. 7 is the highest level, where the fan reaches
+the maximum recommended speed. Level "auto" means the EC changes the
+fan level according to some internal algorithm, usually based on
+readings from the thermal sensors. Level "disengaged" means the EC
+disables the speed-locked closed-loop fan control, and drives the fan as
+fast as it can go, which might exceed hardware limits, so use this level
+with caution.
+
+The fan usually ramps up or down slowly from one speed to another,
+and it is normal for the EC to take several seconds to react to fan
+commands.
The fan may be enabled or disabled with the following commands:
echo enable >/proc/acpi/ibm/fan
echo disable >/proc/acpi/ibm/fan
+Placing a fan on level 0 is the same as disabling it. Enabling a fan
+will try to place it in a safe level if it is too slow or disabled.
+
WARNING WARNING WARNING: do not leave the fan disabled unless you are
-monitoring the temperature sensor readings and you are ready to enable
-it if necessary to avoid overheating.
+monitoring all of the temperature sensor readings and you are ready to
+enable it if necessary to avoid overheating.
-The fan only runs if it's enabled *and* the various temperature
-sensors which control it read high enough. On the X40, this seems to
-depend on the CPU and HDD temperatures. Specifically, the fan is
-turned on when either the CPU temperature climbs to 56 degrees or the
-HDD temperature climbs to 46 degrees. The fan is turned off when the
-CPU temperature drops to 49 degrees and the HDD temperature drops to
-41 degrees. These thresholds cannot currently be controlled.
+An enabled fan in level "auto" may stop spinning if the EC decides the
+ThinkPad is cool enough and doesn't need the extra airflow. This is
+normal, and the EC will spin the fan up if the varios thermal readings
+rise too much.
+
+On the X40, this seems to depend on the CPU and HDD temperatures.
+Specifically, the fan is turned on when either the CPU temperature
+climbs to 56 degrees or the HDD temperature climbs to 46 degrees. The
+fan is turned off when the CPU temperature drops to 49 degrees and the
+HDD temperature drops to 41 degrees. These thresholds cannot
+currently be controlled.
+
+The fan level can be controlled with the command:
+
+ echo 'level <level>' > /proc/acpi/ibm/thermal
+
+Where <level> is an integer from 0 to 7, or one of the words "auto"
+or "disengaged" (without the quotes). Not all ThinkPads support the
+"auto" and "disengaged" levels.
On the X31 and X40 (and ONLY on those models), the fan speed can be
controlled to a certain degree. Once the fan is running, it can be
any effect or the fan speed eventually settles somewhere in that
range. The fan cannot be stopped or started with this command.
-On the 570, temperature readings are not available through this
-feature and the fan control works a little differently. The fan speed
-is reported in levels from 0 (off) to 7 (max) and can be controlled
-with the following command:
-
- echo 'level <level>' > /proc/acpi/ibm/thermal
+The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
+certain conditions are met. It will override any fan programming done
+through ibm-acpi.
EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
---------------------------------------
modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
+The ibm-acpi kernel driver can be programmed to revert the fan level
+to a safe setting if userspace does not issue one of the fan commands:
+"enable", "disable", "level" or "watchdog" within a configurable
+ammount of time. To do this, use the "watchdog" command.
+
+ echo 'watchdog <interval>' > /proc/acpi/ibm/fan
+
+Interval is the ammount of time in seconds to wait for one of the
+above mentioned fan commands before reseting the fan level to a safe
+one. If set to zero, the watchdog is disabled (default). When the
+watchdog timer runs out, it does the exact equivalent of the "enable"
+fan command.
+
+Note that the watchdog timer stops after it enables the fan. It will
+be rearmed again automatically (using the same interval) when one of
+the above mentioned fan commands is received. The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made
+through means other than the "enable", "disable", and "level" fan
+commands.
+
Example Configuration
---------------------
memory image to a dump file on the local disk, or across the network to
a remote system.
-Kdump and kexec are currently supported on the x86, x86_64, and ppc64
+Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
architectures.
When the system kernel boots, it reserves a small section of memory for
Setup and Installation
======================
-Install kexec-tools and the Kdump patch
----------------------------------------
+Install kexec-tools
+-------------------
1) Login as the root user.
2) Download the kexec-tools user-space package from the following URL:
- http://www.xmission.com/~ebiederm/files/kexec/kexec-tools-1.101.tar.gz
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing.tar.gz
-3) Unpack the tarball with the tar command, as follows:
-
- tar xvpzf kexec-tools-1.101.tar.gz
-
-4) Download the latest consolidated Kdump patch from the following URL:
+This is a symlink to the latest version, which at the time of writing is
+20061214, the only release of kexec-tools-testing so far. As other versions
+are made released, the older onese will remain available at
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
- http://lse.sourceforge.net/kdump/
+Note: Latest kexec-tools-testing git tree is available at
- (This location is being used until all the user-space Kdump patches
- are integrated with the kexec-tools package.)
+git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git
+or
+http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary
-5) Change to the kexec-tools-1.101 directory, as follows:
+3) Unpack the tarball with the tar command, as follows:
- cd kexec-tools-1.101
+ tar xvpzf kexec-tools-testing.tar.gz
-6) Apply the consolidated patch to the kexec-tools-1.101 source tree
- with the patch command, as follows. (Modify the path to the downloaded
- patch as necessary.)
+4) Change to the kexec-tools directory, as follows:
- patch -p1 < /path-to-kdump-patch/kexec-tools-1.101-kdump.patch
+ cd kexec-tools-testing-VERSION
-7) Configure the package, as follows:
+5) Configure the package, as follows:
./configure
-8) Compile the package, as follows:
+6) Compile the package, as follows:
make
-9) Install the package, as follows:
+7) Install the package, as follows:
make install
-Download and build the system and dump-capture kernels
-------------------------------------------------------
+Build the system and dump-capture kernels
+-----------------------------------------
+There are two possible methods of using Kdump.
+
+1) Build a separate custom dump-capture kernel for capturing the
+ kernel core dump.
-Download the mainline (vanilla) kernel source code (2.6.13-rc1 or newer)
-from http://www.kernel.org. Two kernels must be built: a system kernel
-and a dump-capture kernel. Use the following steps to configure these
-kernels with the necessary kexec and Kdump features:
+2) Or use the system kernel binary itself as dump-capture kernel and there is
+ no need to build a separate dump-capture kernel. This is possible
+ only with the architecutres which support a relocatable kernel. As
+ of today i386 and ia64 architectures support relocatable kernel.
-System kernel
--------------
+Building a relocatable kernel is advantageous from the point of view that
+one does not have to build a second kernel for capturing the dump. But
+at the same time one might want to build a custom dump capture kernel
+suitable to his needs.
+
+Following are the configuration setting required for system and
+dump-capture kernels for enabling kdump support.
+
+System kernel config options
+----------------------------
1) Enable "kexec system call" in "Processor type and features."
analysis tools require a vmlinux with debug symbols in order to read
and analyze a dump file.
-4) Make and install the kernel and its modules. Update the boot loader
- (such as grub, yaboot, or lilo) configuration files as necessary.
+Dump-capture kernel config options (Arch Independent)
+-----------------------------------------------------
-5) Boot the system kernel with the boot parameter "crashkernel=Y@X",
- where Y specifies how much memory to reserve for the dump-capture kernel
- and X specifies the beginning of this reserved memory. For example,
- "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
- starting at physical address 0x01000000 for the dump-capture kernel.
-
- On x86 and x86_64, use "crashkernel=64M@16M".
-
- On ppc64, use "crashkernel=128M@32M".
+1) Enable "kernel crash dumps" support under "Processor type and
+ features":
+ CONFIG_CRASH_DUMP=y
-The dump-capture kernel
------------------------
+2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems".
-1) Under "General setup," append "-kdump" to the current string in
- "Local version."
+ CONFIG_PROC_VMCORE=y
+ (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
-2) On x86, enable high memory support under "Processor type and
+Dump-capture kernel config options (Arch Dependent, i386)
+--------------------------------------------------------
+1) On x86, enable high memory support under "Processor type and
features":
CONFIG_HIGHMEM64G=y
or
CONFIG_HIGHMEM4G
-3) On x86 and x86_64, disable symmetric multi-processing support
+2) On x86 and x86_64, disable symmetric multi-processing support
under "Processor type and features":
CONFIG_SMP=n
+
(If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
when loading the dump-capture kernel, see section "Load the Dump-capture
Kernel".)
-4) On ppc64, disable NUMA support and enable EMBEDDED support:
+3) If one wants to build and use a relocatable kernel,
+ Enable "Build a relocatable kernel" support under "Processor type and
+ features"
- CONFIG_NUMA=n
- CONFIG_EMBEDDED=y
- CONFIG_EEH=N for the dump-capture kernel
+ CONFIG_RELOCATABLE=y
-5) Enable "kernel crash dumps" support under "Processor type and
- features":
+4) Use a suitable value for "Physical address where the kernel is
+ loaded" (under "Processor type and features"). This only appears when
+ "kernel crash dumps" is enabled. A suitable value depends upon
+ whether kernel is relocatable or not.
+
+ If you are using a relocatable kernel use CONFIG_PHYSICAL_START=0x100000
+ This will compile the kernel for physical address 1MB, but given the fact
+ kernel is relocatable, it can be run from any physical address hence
+ kexec boot loader will load it in memory region reserved for dump-capture
+ kernel.
+
+ Otherwise it should be the start of memory region reserved for
+ second kernel using boot parameter "crashkernel=Y@X". Here X is
+ start of memory region reserved for dump-capture kernel.
+ Generally X is 16MB (0x1000000). So you can set
+ CONFIG_PHYSICAL_START=0x1000000
+
+5) Make and install the kernel and its modules. DO NOT add this kernel
+ to the boot loader configuration files.
- CONFIG_CRASH_DUMP=y
+Dump-capture kernel config options (Arch Dependent, x86_64)
+----------------------------------------------------------
+1) On x86 and x86_64, disable symmetric multi-processing support
+ under "Processor type and features":
-6) Use a suitable value for "Physical address where the kernel is
+ CONFIG_SMP=n
+
+ (If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
+ when loading the dump-capture kernel, see section "Load the Dump-capture
+ Kernel".)
+
+2) Use a suitable value for "Physical address where the kernel is
loaded" (under "Processor type and features"). This only appears when
"kernel crash dumps" is enabled. By default this value is 0x1000000
(16MB). It should be the same as X in the "crashkernel=Y@X" boot
- parameter discussed above.
+ parameter.
- On x86 and x86_64, use "CONFIG_PHYSICAL_START=0x1000000".
+ For x86_64, normally "CONFIG_PHYSICAL_START=0x1000000".
- On ppc64 the value is automatically set at 32MB when
- CONFIG_CRASH_DUMP is set.
+3) Make and install the kernel and its modules. DO NOT add this kernel
+ to the boot loader configuration files.
-6) Optionally enable "/proc/vmcore support" under "Filesystems" ->
- "Pseudo filesystems".
+Dump-capture kernel config options (Arch Dependent, ppc64)
+----------------------------------------------------------
- CONFIG_PROC_VMCORE=y
- (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
-
-7) Make and install the kernel and its modules. DO NOT add this kernel
+- Make and install the kernel and its modules. DO NOT add this kernel
to the boot loader configuration files.
+Dump-capture kernel config options (Arch Dependent, ia64)
+----------------------------------------------------------
+
+- No specific options are required to create a dump-capture kernel
+ for ia64, other than those specified in the arch idependent section
+ above. This means that it is possible to use the system kernel
+ as a dump-capture kernel if desired.
+
+ The crashkernel region can be automatically placed by the system
+ kernel at run time. This is done by specifying the base address as 0,
+ or omitting it all together.
+
+ crashkernel=256M@0
+ or
+ crashkernel=256M
+
+ If the start address is specified, note that the start address of the
+ kernel will be aligned to 64Mb, so if the start address is not then
+ any space below the alignment point will be wasted.
+
+
+Boot into System Kernel
+=======================
+
+1) Make and install the kernel and its modules. Update the boot loader
+ (such as grub, yaboot, or lilo) configuration files as necessary.
+
+2) Boot the system kernel with the boot parameter "crashkernel=Y@X",
+ where Y specifies how much memory to reserve for the dump-capture kernel
+ and X specifies the beginning of this reserved memory. For example,
+ "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
+ starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
+
+ On x86 and x86_64, use "crashkernel=64M@16M".
+
+ On ppc64, use "crashkernel=128M@32M".
+
+ On ia64, 256M@256M is a generous value that typically works.
+ The region may be automatically placed on ia64, see the
+ dump-capture kernel config option notes above.
Load the Dump-capture Kernel
============================
-After booting to the system kernel, load the dump-capture kernel using
-the following command:
+After booting to the system kernel, dump-capture kernel needs to be
+loaded.
+
+Based on the architecture and type of image (relocatable or not), one
+can choose to load the uncompressed vmlinux or compressed bzImage/vmlinuz
+of dump-capture kernel. Following is the summary.
+
+For i386:
+ - Use vmlinux if kernel is not relocatable.
+ - Use bzImage/vmlinuz if kernel is relocatable.
+For x86_64:
+ - Use vmlinux
+For ppc64:
+ - Use vmlinux
+For ia64:
+ - Use vmlinux or vmlinuz.gz
+
- kexec -p <dump-capture-kernel> \
+If you are using a uncompressed vmlinux image then use following command
+to load dump-capture kernel.
+
+ kexec -p <dump-capture-kernel-vmlinux-image> \
--initrd=<initrd-for-dump-capture-kernel> --args-linux \
- --append="root=<root-dev> init 1 irqpoll"
+ --append="root=<root-dev> <arch-specific-options>"
+If you are using a compressed bzImage/vmlinuz, then use following command
+to load dump-capture kernel.
-Notes on loading the dump-capture kernel:
+ kexec -p <dump-capture-kernel-bzImage> \
+ --initrd=<initrd-for-dump-capture-kernel> \
+ --append="root=<root-dev> <arch-specific-options>"
+
+Please note, that --args-linux does not need to be specified for ia64.
+It is planned to make this a no-op on that architecture, but for now
+it should be omitted
+
+Following are the arch specific command line options to be used while
+loading dump-capture kernel.
-* <dump-capture-kernel> must be a vmlinux image (that is, an
- uncompressed ELF image). bzImage does not work at this time.
+For i386, x86_64 and ia64:
+ "init 1 irqpoll maxcpus=1"
+
+For ppc64:
+ "init 1 maxcpus=1 noirqdistrib"
+
+
+Notes on loading the dump-capture kernel:
* By default, the ELF headers are stored in ELF64 format to support
systems with more than 4GB memory. The --elf32-core-headers option can
* "init 1" boots the dump-capture kernel into single-user mode without
networking. If you want networking, use "init 3."
+* We generally don' have to bring up a SMP kernel just to capture the
+ dump. Hence generally it is useful either to build a UP dump-capture
+ kernel or specify maxcpus=1 option while loading dump-capture kernel.
Kernel Panic
============
uart6850= [HW,OSS]
Format: <io>,<irq>
+ uhci-hcd.ignore_oc=
+ [USB] Ignore overcurrent events (default N).
+ Some badly-designed motherboards generate lots of
+ bogus events, for ports that aren't wired to
+ anything. Set this parameter to avoid log spamming.
+ Note that genuine overcurrent events won't be
+ reported either.
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
- How To Write Linux PCI Drivers
- by Martin Mares <mj@ucw.cz> on 07-Feb-2000
+ How To Write Linux PCI Drivers
+
+ by Martin Mares <mj@ucw.cz> on 07-Feb-2000
+ updated by Grant Grundler <grundler@parisc-linux.org> on 23-Dec-2006
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The world of PCI is vast and it's full of (mostly unpleasant) surprises.
-Different PCI devices have different requirements and different bugs --
-because of this, the PCI support layer in Linux kernel is not as trivial
-as one would wish. This short pamphlet tries to help all potential driver
-authors find their way through the deep forests of PCI handling.
+The world of PCI is vast and full of (mostly unpleasant) surprises.
+Since each CPU architecture implements different chip-sets and PCI devices
+have different requirements (erm, "features"), the result is the PCI support
+in the Linux kernel is not as trivial as one would wish. This short paper
+tries to introduce all potential driver authors to Linux APIs for
+PCI device drivers.
+
+A more complete resource is the third edition of "Linux Device Drivers"
+by Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman.
+LDD3 is available for free (under Creative Commons License) from:
+
+ http://lwn.net/Kernel/LDD3/
+
+However, keep in mind that all documents are subject to "bit rot".
+Refer to the source code if things are not working as described here.
+
+Please send questions/comments/patches about Linux PCI API to the
+"Linux PCI" <linux-pci@atrey.karlin.mff.cuni.cz> mailing list.
+
0. Structure of PCI drivers
~~~~~~~~~~~~~~~~~~~~~~~~~~~
-There exist two kinds of PCI drivers: new-style ones (which leave most of
-probing for devices to the PCI layer and support online insertion and removal
-of devices [thus supporting PCI, hot-pluggable PCI and CardBus in a single
-driver]) and old-style ones which just do all the probing themselves. Unless
-you have a very good reason to do so, please don't use the old way of probing
-in any new code. After the driver finds the devices it wishes to operate
-on (either the old or the new way), it needs to perform the following steps:
+PCI drivers "discover" PCI devices in a system via pci_register_driver().
+Actually, it's the other way around. When the PCI generic code discovers
+a new device, the driver with a matching "description" will be notified.
+Details on this below.
+
+pci_register_driver() leaves most of the probing for devices to
+the PCI layer and supports online insertion/removal of devices [thus
+supporting hot-pluggable PCI, CardBus, and Express-Card in a single driver].
+pci_register_driver() call requires passing in a table of function
+pointers and thus dictates the high level structure of a driver.
+
+Once the driver knows about a PCI device and takes ownership, the
+driver generally needs to perform the following initialization:
Enable the device
- Access device configuration space
- Discover resources (addresses and IRQ numbers) provided by the device
- Allocate these resources
- Communicate with the device
+ Request MMIO/IOP resources
+ Set the DMA mask size (for both coherent and streaming DMA)
+ Allocate and initialize shared control data (pci_allocate_coherent())
+ Access device configuration space (if needed)
+ Register IRQ handler (request_irq())
+ Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+ Enable DMA/processing engines
+
+When done using the device, and perhaps the module needs to be unloaded,
+the driver needs to take the follow steps:
+ Disable the device from generating IRQs
+ Release the IRQ (free_irq())
+ Stop all DMA activity
+ Release DMA buffers (both streaming and coherent)
+ Unregister from other subsystems (e.g. scsi or netdev)
+ Release MMIO/IOP resources
Disable the device
-Most of these topics are covered by the following sections, for the rest
-look at <linux/pci.h>, it's hopefully well commented.
+Most of these topics are covered in the following sections.
+For the rest look at LDD3 or <linux/pci.h> .
If the PCI subsystem is not configured (CONFIG_PCI is not set), most of
-the functions described below are defined as inline functions either completely
-empty or just returning an appropriate error codes to avoid lots of ifdefs
-in the drivers.
+the PCI functions described below are defined as inline functions either
+completely empty or just returning an appropriate error codes to avoid
+lots of ifdefs in the drivers.
+
-1. New-style drivers
-~~~~~~~~~~~~~~~~~~~~
-The new-style drivers just call pci_register_driver during their initialization
-with a pointer to a structure describing the driver (struct pci_driver) which
-contains:
+1. pci_register_driver() call
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- name Name of the driver
+PCI device drivers call pci_register_driver() during their
+initialization with a pointer to a structure describing the driver
+(struct pci_driver):
+
+ field name Description
+ ---------- ------------------------------------------------------
id_table Pointer to table of device ID's the driver is
interested in. Most drivers should export this
table using MODULE_DEVICE_TABLE(pci,...).
- probe Pointer to a probing function which gets called (during
- execution of pci_register_driver for already existing
- devices or later if a new device gets inserted) for all
- PCI devices which match the ID table and are not handled
- by the other drivers yet. This function gets passed a
- pointer to the pci_dev structure representing the device
- and also which entry in the ID table did the device
- match. It returns zero when the driver has accepted the
- device or an error code (negative number) otherwise.
- This function always gets called from process context,
- so it can sleep.
- remove Pointer to a function which gets called whenever a
- device being handled by this driver is removed (either
- during deregistration of the driver or when it's
- manually pulled out of a hot-pluggable slot). This
- function always gets called from process context, so it
- can sleep.
- save_state Save a device's state before it's suspend.
+
+ probe This probing function gets called (during execution
+ of pci_register_driver() for already existing
+ devices or later if a new device gets inserted) for
+ all PCI devices which match the ID table and are not
+ "owned" by the other drivers yet. This function gets
+ passed a "struct pci_dev *" for each device whose
+ entry in the ID table matches the device. The probe
+ function returns zero when the driver chooses to
+ take "ownership" of the device or an error code
+ (negative number) otherwise.
+ The probe function always gets called from process
+ context, so it can sleep.
+
+ remove The remove() function gets called whenever a device
+ being handled by this driver is removed (either during
+ deregistration of the driver or when it's manually
+ pulled out of a hot-pluggable slot).
+ The remove function always gets called from process
+ context, so it can sleep.
+
suspend Put device into low power state.
+ suspend_late Put device into low power state.
+
+ resume_early Wake device from low power state.
resume Wake device from low power state.
+
+ (Please see Documentation/power/pci.txt for descriptions
+ of PCI Power Management and the related functions.)
+
enable_wake Enable device to generate wake events from a low power
state.
- (Please see Documentation/power/pci.txt for descriptions
- of PCI Power Management and the related functions)
+ shutdown Hook into reboot_notifier_list (kernel/sys.c).
+ Intended to stop any idling DMA operations.
+ Useful for enabling wake-on-lan (NIC) or changing
+ the power state of a device before reboot.
+ e.g. drivers/net/e100.c.
+
+ err_handler See Documentation/pci-error-recovery.txt
+
+ multithread_probe Enable multi-threaded probe/scan. Driver must
+ provide its own locking/syncronization for init
+ operations if this is enabled.
+
-The ID table is an array of struct pci_device_id ending with a all-zero entry.
-Each entry consists of:
+The ID table is an array of struct pci_device_id entries ending with an
+all-zero entry. Each entry consists of:
+
+ vendor,device Vendor and device ID to match (or PCI_ANY_ID)
- vendor, device Vendor and device ID to match (or PCI_ANY_ID)
subvendor, Subsystem vendor and device ID to match (or PCI_ANY_ID)
- subdevice
- class, Device class to match. The class_mask tells which bits
- class_mask of the class are honored during the comparison.
+ subdevice,
+
+ class Device class, subclass, and "interface" to match.
+ See Appendix D of the PCI Local Bus Spec or
+ include/linux/pci_ids.h for a full list of classes.
+ Most drivers do not need to specify class/class_mask
+ as vendor/device is normally sufficient.
+
+ class_mask limit which sub-fields of the class field are compared.
+ See drivers/scsi/sym53c8xx_2/ for example of usage.
+
driver_data Data private to the driver.
+ Most drivers don't need to use driver_data field.
+ Best practice is to use driver_data as an index
+ into a static list of equivalent device types,
+ instead of using it as a pointer.
-Most drivers don't need to use the driver_data field. Best practice
-for use of driver_data is to use it as an index into a static list of
-equivalent device types, not to use it as a pointer.
-Have a table entry {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID}
-to have probe() called for every PCI device known to the system.
+Most drivers only need PCI_DEVICE() or PCI_DEVICE_CLASS() to set up
+a pci_device_id table.
-New PCI IDs may be added to a device driver at runtime by writing
-to the file /sys/bus/pci/drivers/{driver}/new_id. When added, the
-driver will probe for all devices it can support.
+New PCI IDs may be added to a device driver pci_ids table at runtime
+as shown below:
echo "vendor device subvendor subdevice class class_mask driver_data" > \
- /sys/bus/pci/drivers/{driver}/new_id
-where all fields are passed in as hexadecimal values (no leading 0x).
-Users need pass only as many fields as necessary; vendor, device,
-subvendor, and subdevice fields default to PCI_ANY_ID (FFFFFFFF),
-class and classmask fields default to 0, and driver_data defaults to
-0UL. Device drivers must initialize use_driver_data in the dynids struct
-in their pci_driver struct prior to calling pci_register_driver in order
-for the driver_data field to get passed to the driver. Otherwise, only a
-0 is passed in that field.
+/sys/bus/pci/drivers/{driver}/new_id
+
+All fields are passed in as hexadecimal values (no leading 0x).
+Users need pass only as many fields as necessary:
+ o vendor, device, subvendor, and subdevice fields default
+ to PCI_ANY_ID (FFFFFFFF),
+ o class and classmask fields default to 0
+ o driver_data defaults to 0UL.
+
+Once added, the driver probe routine will be invoked for any unclaimed
+PCI devices listed in its (newly updated) pci_ids list.
When the driver exits, it just calls pci_unregister_driver() and the PCI layer
automatically calls the remove hook for all devices handled by the driver.
+
+1.1 "Attributes" for driver functions/data
+
Please mark the initialization and cleanup functions where appropriate
(the corresponding macros are defined in <linux/init.h>):
__init Initialization code. Thrown away after the driver
initializes.
__exit Exit code. Ignored for non-modular drivers.
- __devinit Device initialization code. Identical to __init if
- the kernel is not compiled with CONFIG_HOTPLUG, normal
- function otherwise.
+
+
+ __devinit Device initialization code.
+ Identical to __init if the kernel is not compiled
+ with CONFIG_HOTPLUG, normal function otherwise.
__devexit The same for __exit.
-Tips:
- The module_init()/module_exit() functions (and all initialization
- functions called only from these) should be marked __init/exit.
- The struct pci_driver shouldn't be marked with any of these tags.
- The ID table array should be marked __devinitdata.
- The probe() and remove() functions (and all initialization
- functions called only from these) should be marked __devinit/exit.
- If you are sure the driver is not a hotplug driver then use only
- __init/exit __initdata/exitdata.
+Tips on when/where to use the above attributes:
+ o The module_init()/module_exit() functions (and all
+ initialization functions called _only_ from these)
+ should be marked __init/__exit.
- Pointers to functions marked as __devexit must be created using
- __devexit_p(function_name). That will generate the function
- name or NULL if the __devexit function will be discarded.
+ o Do not mark the struct pci_driver.
+ o The ID table array should be marked __devinitdata.
-2. How to find PCI devices manually (the old style)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-PCI drivers not using the pci_register_driver() interface search
-for PCI devices manually using the following constructs:
+ o The probe() and remove() functions should be marked __devinit
+ and __devexit respectively. All initialization functions
+ exclusively called by the probe() routine, can be marked __devinit.
+ Ditto for remove() and __devexit.
+
+ o If mydriver_probe() is marked with __devinit(), then all address
+ references to mydriver_probe must use __devexit_p(mydriver_probe)
+ (in the struct pci_driver declaration for example).
+ __devexit_p() will generate the function name _or_ NULL if the
+ function will be discarded. For an example, see drivers/net/tg3.c.
+
+ o Do NOT mark a function if you are not sure which mark to use.
+ Better to not mark the function than mark the function wrong.
+
+
+
+2. How to find PCI devices manually
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PCI drivers should have a really good reason for not using the
+pci_register_driver() interface to search for PCI devices.
+The main reason PCI devices are controlled by multiple drivers
+is because one PCI device implements several different HW services.
+E.g. combined serial/parallel port/floppy controller.
+
+A manual search may be performed using the following constructs:
Searching by vendor and device ID:
Searching by both vendor/device and subsystem vendor/device ID:
- pci_get_subsys(VENDOR_ID, DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev).
+ pci_get_subsys(VENDOR_ID,DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev).
- You can use the constant PCI_ANY_ID as a wildcard replacement for
+You can use the constant PCI_ANY_ID as a wildcard replacement for
VENDOR_ID or DEVICE_ID. This allows searching for any device from a
specific vendor, for example.
- These functions are hotplug-safe. They increment the reference count on
+These functions are hotplug-safe. They increment the reference count on
the pci_dev that they return. You must eventually (possibly at module unload)
decrement the reference count on these devices by calling pci_dev_put().
-3. Enabling and disabling devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Before you do anything with the device you've found, you need to enable
-it by calling pci_enable_device() which enables I/O and memory regions of
-the device, allocates an IRQ if necessary, assigns missing resources if
-needed and wakes up the device if it was in suspended state. Please note
-that this function can fail.
- If you want to use the device in bus mastering mode, call pci_set_master()
-which enables the bus master bit in PCI_COMMAND register and also fixes
-the latency timer value if it's set to something bogus by the BIOS.
+3. Device Initialization Steps
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As noted in the introduction, most PCI drivers need the following steps
+for device initialization:
- If you want to use the PCI Memory-Write-Invalidate transaction,
+ Enable the device
+ Request MMIO/IOP resources
+ Set the DMA mask size (for both coherent and streaming DMA)
+ Allocate and initialize shared control data (pci_allocate_coherent())
+ Access device configuration space (if needed)
+ Register IRQ handler (request_irq())
+ Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+ Enable DMA/processing engines.
+
+The driver can access PCI config space registers at any time.
+(Well, almost. When running BIST, config space can go away...but
+that will just result in a PCI Bus Master Abort and config reads
+will return garbage).
+
+
+3.1 Enable the PCI device
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Before touching any device registers, the driver needs to enable
+the PCI device by calling pci_enable_device(). This will:
+ o wake up the device if it was in suspended state,
+ o allocate I/O and memory regions of the device (if BIOS did not),
+ o allocate an IRQ (if BIOS did not).
+
+NOTE: pci_enable_device() can fail! Check the return value.
+NOTE2: Also see pci_enable_device_bars() below. Drivers can
+ attempt to enable only a subset of BARs they need.
+
+[ OS BUG: we don't check resource allocations before enabling those
+ resources. The sequence would make more sense if we called
+ pci_request_resources() before calling pci_enable_device().
+ Currently, the device drivers can't detect the bug when when two
+ devices have been allocated the same range. This is not a common
+ problem and unlikely to get fixed soon.
+
+ This has been discussed before but not changed as of 2.6.19:
+ http://lkml.org/lkml/2006/3/2/194
+]
+
+pci_set_master() will enable DMA by setting the bus master bit
+in the PCI_COMMAND register. It also fixes the latency timer value if
+it's set to something bogus by the BIOS.
+
+If the PCI device can use the PCI Memory-Write-Invalidate transaction,
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
and also ensures that the cache line size register is set correctly.
-Make sure to check the return value of pci_set_mwi(), not all architectures
-may support Memory-Write-Invalidate.
+Check the return value of pci_set_mwi() as not all architectures
+or chip-sets may support Memory-Write-Invalidate.
+
+
+3.2 Request MMIO/IOP resources
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Memory (MMIO), and I/O port addresses should NOT be read directly
+from the PCI device config space. Use the values in the pci_dev structure
+as the PCI "bus address" might have been remapped to a "host physical"
+address by the arch/chip-set specific kernel support.
- If your driver decides to stop using the device (e.g., there was an
-error while setting it up or the driver module is being unloaded), it
-should call pci_disable_device() to deallocate any IRQ resources, disable
-PCI bus-mastering, etc. You should not do anything with the device after
+See Documentation/IO-mapping.txt for how to access device registers
+or device memory.
+
+The device driver needs to call pci_request_region() to verify
+no other device is already using the same address resource.
+Conversely, drivers should call pci_release_region() AFTER
calling pci_disable_device().
+The idea is to prevent two devices colliding on the same address range.
+
+[ See OS BUG comment above. Currently (2.6.19), The driver can only
+ determine MMIO and IO Port resource availability _after_ calling
+ pci_enable_device(). ]
+
+Generic flavors of pci_request_region() are request_mem_region()
+(for MMIO ranges) and request_region() (for IO Port ranges).
+Use these for address resources that are not described by "normal" PCI
+BARs.
+
+Also see pci_request_selected_regions() below.
+
+
+3.3 Set the DMA mask size
+~~~~~~~~~~~~~~~~~~~~~~~~~
+[ If anything below doesn't make sense, please refer to
+ Documentation/DMA-API.txt. This section is just a reminder that
+ drivers need to indicate DMA capabilities of the device and is not
+ an authoritative source for DMA interfaces. ]
+
+While all drivers should explicitly indicate the DMA capability
+(e.g. 32 or 64 bit) of the PCI bus master, devices with more than
+32-bit bus master capability for streaming data need the driver
+to "register" this capability by calling pci_set_dma_mask() with
+appropriate parameters. In general this allows more efficient DMA
+on systems where System RAM exists above 4G _physical_ address.
+
+Drivers for all PCI-X and PCIe compliant devices must call
+pci_set_dma_mask() as they are 64-bit DMA devices.
+
+Similarly, drivers must also "register" this capability if the device
+can directly address "consistent memory" in System RAM above 4G physical
+address by calling pci_set_consistent_dma_mask().
+Again, this includes drivers for all PCI-X and PCIe compliant devices.
+Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
+64-bit DMA capable for payload ("streaming") data but not control
+("consistent") data.
+
+
+3.4 Setup shared control data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
+memory. See Documentation/DMA-API.txt for a full description of
+the DMA APIs. This section is just a reminder that it needs to be done
+before enabling DMA on the device.
+
+
+3.5 Initialize device registers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Some drivers will need specific "capability" fields programmed
+or other "vendor specific" register initialized or reset.
+E.g. clearing pending interrupts.
+
+
+3.6 Register IRQ handler
+~~~~~~~~~~~~~~~~~~~~~~~~
+While calling request_irq() is the the last step described here,
+this is often just another intermediate step to initialize a device.
+This step can often be deferred until the device is opened for use.
+
+All interrupt handlers for IRQ lines should be registered with IRQF_SHARED
+and use the devid to map IRQs to devices (remember that all PCI IRQ lines
+can be shared).
+
+request_irq() will associate an interrupt handler and device handle
+with an interrupt number. Historically interrupt numbers represent
+IRQ lines which run from the PCI device to the Interrupt controller.
+With MSI and MSI-X (more below) the interrupt number is a CPU "vector".
+
+request_irq() also enables the interrupt. Make sure the device is
+quiesced and does not have any interrupts pending before registering
+the interrupt handler.
+
+MSI and MSI-X are PCI capabilities. Both are "Message Signaled Interrupts"
+which deliver interrupts to the CPU via a DMA write to a Local APIC.
+The fundamental difference between MSI and MSI-X is how multiple
+"vectors" get allocated. MSI requires contiguous blocks of vectors
+while MSI-X can allocate several individual ones.
+
+MSI capability can be enabled by calling pci_enable_msi() or
+pci_enable_msix() before calling request_irq(). This causes
+the PCI support to program CPU vector data into the PCI device
+capability registers.
+
+If your PCI device supports both, try to enable MSI-X first.
+Only one can be enabled at a time. Many architectures, chip-sets,
+or BIOSes do NOT support MSI or MSI-X and the call to pci_enable_msi/msix
+will fail. This is important to note since many drivers have
+two (or more) interrupt handlers: one for MSI/MSI-X and another for IRQs.
+They choose which handler to register with request_irq() based on the
+return value from pci_enable_msi/msix().
+
+There are (at least) two really good reasons for using MSI:
+1) MSI is an exclusive interrupt vector by definition.
+ This means the interrupt handler doesn't have to verify
+ its device caused the interrupt.
+
+2) MSI avoids DMA/IRQ race conditions. DMA to host memory is guaranteed
+ to be visible to the host CPU(s) when the MSI is delivered. This
+ is important for both data coherency and avoiding stale control data.
+ This guarantee allows the driver to omit MMIO reads to flush
+ the DMA stream.
+
+See drivers/infiniband/hw/mthca/ or drivers/net/tg3.c for examples
+of MSI/MSI-X usage.
+
+
+
+4. PCI device shutdown
+~~~~~~~~~~~~~~~~~~~~~~~
+
+When a PCI device driver is being unloaded, most of the following
+steps need to be performed:
+
+ Disable the device from generating IRQs
+ Release the IRQ (free_irq())
+ Stop all DMA activity
+ Release DMA buffers (both streaming and consistent)
+ Unregister from other subsystems (e.g. scsi or netdev)
+ Disable device from responding to MMIO/IO Port addresses
+ Release MMIO/IO Port resource(s)
+
+
+4.1 Stop IRQs on the device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+How to do this is chip/device specific. If it's not done, it opens
+the possibility of a "screaming interrupt" if (and only if)
+the IRQ is shared with another device.
+
+When the shared IRQ handler is "unhooked", the remaining devices
+using the same IRQ line will still need the IRQ enabled. Thus if the
+"unhooked" device asserts IRQ line, the system will respond assuming
+it was one of the remaining devices asserted the IRQ line. Since none
+of the other devices will handle the IRQ, the system will "hang" until
+it decides the IRQ isn't going to get handled and masks the IRQ (100,000
+iterations later). Once the shared IRQ is masked, the remaining devices
+will stop functioning properly. Not a nice situation.
+
+This is another reason to use MSI or MSI-X if it's available.
+MSI and MSI-X are defined to be exclusive interrupts and thus
+are not susceptible to the "screaming interrupt" problem.
+
+
+4.2 Release the IRQ
+~~~~~~~~~~~~~~~~~~~
+Once the device is quiesced (no more IRQs), one can call free_irq().
+This function will return control once any pending IRQs are handled,
+"unhook" the drivers IRQ handler from that IRQ, and finally release
+the IRQ if no one else is using it.
+
+
+4.3 Stop all DMA activity
+~~~~~~~~~~~~~~~~~~~~~~~~~
+It's extremely important to stop all DMA operations BEFORE attempting
+to deallocate DMA control data. Failure to do so can result in memory
+corruption, hangs, and on some chip-sets a hard crash.
-4. How to access PCI config space
+Stopping DMA after stopping the IRQs can avoid races where the
+IRQ handler might restart DMA engines.
+
+While this step sounds obvious and trivial, several "mature" drivers
+didn't get this step right in the past.
+
+
+4.4 Release DMA buffers
+~~~~~~~~~~~~~~~~~~~~~~~
+Once DMA is stopped, clean up streaming DMA first.
+I.e. unmap data buffers and return buffers to "upstream"
+owners if there is one.
+
+Then clean up "consistent" buffers which contain the control data.
+
+See Documentation/DMA-API.txt for details on unmapping interfaces.
+
+
+4.5 Unregister from other subsystems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Most low level PCI device drivers support some other subsystem
+like USB, ALSA, SCSI, NetDev, Infiniband, etc. Make sure your
+driver isn't losing resources from that other subsystem.
+If this happens, typically the symptom is an Oops (panic) when
+the subsystem attempts to call into a driver that has been unloaded.
+
+
+4.6 Disable Device from responding to MMIO/IO Port addresses
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+io_unmap() MMIO or IO Port resources and then call pci_disable_device().
+This is the symmetric opposite of pci_enable_device().
+Do not access device registers after calling pci_disable_device().
+
+
+4.7 Release MMIO/IO Port Resource(s)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Call pci_release_region() to mark the MMIO or IO Port range as available.
+Failure to do so usually results in the inability to reload the driver.
+
+
+
+5. How to access PCI config space
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- You can use pci_(read|write)_config_(byte|word|dword) to access the config
+
+You can use pci_(read|write)_config_(byte|word|dword) to access the config
space of a device represented by struct pci_dev *. All these functions return 0
when successful or an error code (PCIBIOS_...) which can be translated to a text
string by pcibios_strerror. Most drivers expect that accesses to valid PCI
devices don't fail.
- If you don't have a struct pci_dev available, you can call
+If you don't have a struct pci_dev available, you can call
pci_bus_(read|write)_config_(byte|word|dword) to access a given device
and function on that bus.
- If you access fields in the standard portion of the config header, please
+If you access fields in the standard portion of the config header, please
use symbolic names of locations and bits declared in <linux/pci.h>.
- If you need to access Extended PCI Capability registers, just call
+If you need to access Extended PCI Capability registers, just call
pci_find_capability() for the particular capability and it will find the
corresponding register block for you.
-5. Addresses and interrupts
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Memory and port addresses and interrupt numbers should NOT be read from the
-config space. You should use the values in the pci_dev structure as they might
-have been remapped by the kernel.
-
- See Documentation/IO-mapping.txt for how to access device memory.
-
- The device driver needs to call pci_request_region() to make sure
-no other device is already using the same resource. The driver is expected
-to determine MMIO and IO Port resource availability _before_ calling
-pci_enable_device(). Conversely, drivers should call pci_release_region()
-_after_ calling pci_disable_device(). The idea is to prevent two devices
-colliding on the same address range.
-
-Generic flavors of pci_request_region() are request_mem_region()
-(for MMIO ranges) and request_region() (for IO Port ranges).
-Use these for address resources that are not described by "normal" PCI
-interfaces (e.g. BAR).
-
- All interrupt handlers should be registered with IRQF_SHARED and use the devid
-to map IRQs to devices (remember that all PCI interrupts are shared).
-
6. Other interesting functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
pci_find_slot() Find pci_dev corresponding to given bus and
slot numbers.
pci_set_power_state() Set PCI Power Management state (0=D0 ... 3=D3)
pci_clear_mwi() Disable Memory-Write-Invalidate transactions.
+
7. Miscellaneous hints
~~~~~~~~~~~~~~~~~~~~~~
-When displaying PCI slot names to the user (for example when a driver wants
-to tell the user what card has it found), please use pci_name(pci_dev)
-for this purpose.
+
+When displaying PCI device names to the user (for example when a driver wants
+to tell the user what card has it found), please use pci_name(pci_dev).
Always refer to the PCI devices by a pointer to the pci_dev structure.
All PCI layer functions use this identification and it's the only
special purposes -- on systems with multiple primary buses their semantics
can be pretty complex.
-If you're going to use PCI bus mastering DMA, take a look at
-Documentation/DMA-mapping.txt.
-
Don't try to turn on Fast Back to Back writes in your driver. All devices
on the bus need to be capable of doing it, so this is something which needs
to be handled by platform and generic code, not individual drivers.
+
8. Vendor and device identifications
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For the future, let's avoid adding device ids to include/linux/pci_ids.h.
-PCI_VENDOR_ID_xxx for vendors, and a hex constant for device ids.
+One is not not required to add new device ids to include/linux/pci_ids.h.
+Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
+
+PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
+hex numbers (vendor controlled) and normally used only in a single
+location, the pci_device_id table.
+
+Please DO submit new vendor/device ids to pciids.sourceforge.net project.
+
-Rationale: PCI_VENDOR_ID_xxx constants are re-used, but device ids are not.
- Further, device ids are arbitrary hex numbers, normally used only in a
- single location, the pci_device_id table.
9. Obsolete functions
~~~~~~~~~~~~~~~~~~~~~
+
There are several functions which you might come across when trying to
port an old driver to the new PCI interface. They are no longer present
in the kernel as they aren't compatible with hotplug or PCI domains or
having sane locking.
-pci_find_device() Superseded by pci_get_device()
-pci_find_subsys() Superseded by pci_get_subsys()
-pci_find_slot() Superseded by pci_get_slot()
+pci_find_device() Superseded by pci_get_device()
+pci_find_subsys() Superseded by pci_get_subsys()
+pci_find_slot() Superseded by pci_get_slot()
+
+
+The alternative is the traditional PCI device driver that walks PCI
+device lists. This is still possible but discouraged.
+
+
+
+10. pci_enable_device_bars() and Legacy I/O Port space
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Large servers may not be able to provide I/O port resources to all PCI
+devices. I/O Port space is only 64KB on Intel Architecture[1] and is
+likely also fragmented since the I/O base register of PCI-to-PCI
+bridge will usually be aligned to a 4KB boundary[2]. On such systems,
+pci_enable_device() and pci_request_region() will fail when
+attempting to enable I/O Port regions that don't have I/O Port
+resources assigned.
+
+Fortunately, many PCI devices which request I/O Port resources also
+provide access to the same registers via MMIO BARs. These devices can
+be handled without using I/O port space and the drivers typically
+offer a CONFIG_ option to only use MMIO regions
+(e.g. CONFIG_TULIP_MMIO). PCI devices typically provide I/O port
+interface for legacy OSes and will work when I/O port resources are not
+assigned. The "PCI Local Bus Specification Revision 3.0" discusses
+this on p.44, "IMPLEMENTATION NOTE".
+
+If your PCI device driver doesn't need I/O port resources assigned to
+I/O Port BARs, you should use pci_enable_device_bars() instead of
+pci_enable_device() in order not to enable I/O port regions for the
+corresponding devices. In addition, you should use
+pci_request_selected_regions() and pci_release_selected_regions()
+instead of pci_request_regions()/pci_release_regions() in order not to
+request/release I/O port regions for the corresponding devices.
+
+[1] Some systems support 64KB I/O port space per PCI segment.
+[2] Some PCI-to-PCI bridges support optional 1KB aligned I/O base.
+
+
+
+11. MMIO Space and "Write Posting"
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Converting a driver from using I/O Port space to using MMIO space
+often requires some additional changes. Specifically, "write posting"
+needs to be handled. Many drivers (e.g. tg3, acenic, sym53c8xx_2)
+already do this. I/O Port space guarantees write transactions reach the PCI
+device before the CPU can continue. Writes to MMIO space allow the CPU
+to continue before the transaction reaches the PCI device. HW weenies
+call this "Write Posting" because the write completion is "posted" to
+the CPU before the transaction has reached its destination.
+
+Thus, timing sensitive code should add readl() where the CPU is
+expected to wait before doing other work. The classic "bit banging"
+sequence works fine for I/O Port space:
+
+ for (i = 8; --i; val >>= 1) {
+ outb(val & 1, ioport_reg); /* write bit */
+ udelay(10);
+ }
+
+The same sequence for MMIO space should be:
+
+ for (i = 8; --i; val >>= 1) {
+ writeb(val & 1, mmio_reg); /* write bit */
+ readb(safe_mmio_reg); /* flush posted write */
+ udelay(10);
+ }
+
+It is important that "safe_mmio_reg" not have any side effects that
+interferes with the correct operation of the device.
+
+Another case to watch out for is when resetting a PCI device. Use PCI
+Configuration space reads to flush the writel(). This will gracefully
+handle the PCI master abort on all platforms if the PCI device is
+expected to not respond to a readl(). Most x86 platforms will allow
+MMIO reads to master abort (a.k.a. "Soft Fail") and return garbage
+(e.g. ~0). But many RISC platforms will crash (a.k.a."Hard Fail").
+
Required properties:
- device_type : has to be "rom"
- - compatible : Should specify what this ROM device is compatible with
- (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
- (which corresponds to the MTD physmap mapping driver).
- - regs : Offset and length of the register set (or memory mapping) for
+ - compatible : Should specify what this flash device is compatible with.
+ Currently, this is most likely to be "direct-mapped" (which
+ corresponds to the MTD physmap mapping driver).
+ - reg : Offset and length of the register set (or memory mapping) for
the device.
+ - bank-width : Width of the flash data bus in bytes. Required
+ for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
Recommended properties :
- - bank-width : Width of the flash data bus in bytes. Required
- for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
- partitions : Several pairs of 32-bit values where the first value is
partition's offset from the start of the device and the second one is
partition size in bytes with LSB used to signify a read only
- partititon (so, the parition size should always be an even number).
+ partition (so, the parition size should always be an even number).
- partition-names : The list of concatenated zero terminated strings
representing the partition names.
+ - probe-type : The type of probe which should be done for the chip
+ (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
Example:
flash@ff000000 {
device_type = "rom";
compatible = "direct-mapped";
- regs = <ff000000 01000000>;
+ probe-type = "CFI";
+ reg = <ff000000 01000000>;
bank-width = <4>;
partitions = <00000000 00f80000
00f80000 00080001>;
(c) 2006 Secret Lab Technologies Ltd
Grant Likely <grant.likely at secretlab.ca>
+********** DRAFT ***********
+* WARNING: Do not depend on the stability of these bindings just yet.
+* The MPC5200 device tree conventions are still in flux
+* Keep an eye on the linuxppc-dev mailing list for more details
+********** DRAFT ***********
+
I - Introduction
================
Boards supported by the arch/powerpc architecture require device tree be
mscan@<addr> mscan *-mscan CAN bus controller
pci@<addr> pci *-pci PCI bridge
serial@<addr> serial *-psc-uart PSC in serial mode
-i2s@<addr> i2s *-psc-i2s PSC in i2s mode
-ac97@<addr> ac97 *-psc-ac97 PSC in ac97 mode
+i2s@<addr> sound *-psc-i2s PSC in i2s mode
+ac97@<addr> sound *-psc-ac97 PSC in ac97 mode
spi@<addr> spi *-psc-spi PSC in spi mode
irda@<addr> irda *-psc-irda PSC in IrDA mode
spi@<addr> spi *-spi MPC52xx spi device
Supported Cards/Chipsets
-------------------------
PCI ID (pci.ids) OEM Product
- 9005:0283:9005:0283 Adaptec Catapult (3210S with arc firmware)
- 9005:0284:9005:0284 Adaptec Tomcat (3410S with arc firmware)
9005:0285:9005:0285 Adaptec 2200S (Vulcan)
9005:0285:9005:0286 Adaptec 2120S (Crusader)
9005:0285:9005:0287 Adaptec 2200S (Vulcan-2m)
9005:0285:9005:0288 Adaptec 3230S (Harrier)
9005:0285:9005:0289 Adaptec 3240S (Tornado)
9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk)
- 9005:0285:9005:028b Adaptec 2025ZCR (Terminator)
+ 9005:0285:9005:028b Adaptec 2025ZCR (Terminator)
9005:0286:9005:028c Adaptec 2230S (Lancer)
9005:0286:9005:028c Adaptec 2230SLP (Lancer)
9005:0286:9005:028d Adaptec 2130S (Lancer)
9005:0285:9005:028e Adaptec 2020SA (Skyhawk)
- 9005:0285:9005:028f Adaptec 2025SA (Terminator)
+ 9005:0285:9005:028f Adaptec 2025SA (Terminator)
9005:0285:9005:0290 Adaptec 2410SA (Jaguar)
- 9005:0285:103c:3227 Adaptec 2610SA (Bearcat HP release)
- 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16)
+ 9005:0285:103c:3227 Adaptec 2610SA (Bearcat HP release)
+ 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16)
9005:0285:9005:0296 Adaptec 2240S (SabreExpress)
9005:0285:9005:0292 Adaptec 2810SA (Corsair-8)
- 9005:0285:9005:0294 Adaptec Prowler
- 9005:0285:9005:0297 Adaptec 4005SAS (AvonPark)
- 9005:0285:9005:0298 Adaptec 4000SAS (BlackBird)
+ 9005:0285:9005:0297 Adaptec 4005 (AvonPark)
+ 9005:0285:9005:0298 Adaptec 4000 (BlackBird)
9005:0285:9005:0299 Adaptec 4800SAS (Marauder-X)
9005:0285:9005:029a Adaptec 4805SAS (Marauder-E)
9005:0286:9005:029b Adaptec 2820SA (Intruder)
9005:0286:9005:029c Adaptec 2620SA (Intruder)
9005:0286:9005:029d Adaptec 2420SA (Intruder HP release)
- 9005:0286:9005:02a2 Adaptec 3800SAS (Hurricane44)
- 9005:0286:9005:02a7 Adaptec 3805SAS (Hurricane80)
- 9005:0286:9005:02a8 Adaptec 3400SAS (Hurricane40)
- 9005:0286:9005:02ac Adaptec 1800SAS (Typhoon44)
- 9005:0286:9005:02b3 Adaptec 2400SAS (Hurricane40lm)
- 9005:0285:9005:02b5 Adaptec ASR5800 (Voodoo44)
- 9005:0285:9005:02b6 Adaptec ASR5805 (Voodoo80)
- 9005:0285:9005:02b7 Adaptec ASR5808 (Voodoo08)
+ 9005:0286:9005:02ac Adaptec 1800 (Typhoon44)
+ 9005:0285:9005:02b5 Adaptec 5445 (Voodoo44)
+ 9005:0285:9005:02b6 Adaptec 5805 (Voodoo80)
+ 9005:0285:9005:02b7 Adaptec 5085 (Voodoo08)
+ 9005:0285:9005:02bb Adaptec 3405 (Marauder40LP)
+ 9005:0285:9005:02bc Adaptec 3805 (Marauder80LP)
+ 9005:0285:9005:02c7 Adaptec 3085 (Marauder08ELP)
+ 9005:0285:9005:02bd Adaptec 31205 (Marauder120)
+ 9005:0285:9005:02be Adaptec 31605 (Marauder160)
+ 9005:0285:9005:02c3 Adaptec 51205 (Voodoo120)
+ 9005:0285:9005:02c4 Adaptec 51605 (Voodoo160)
1011:0046:9005:0364 Adaptec 5400S (Mustang)
- 1011:0046:9005:0365 Adaptec 5400S (Mustang)
9005:0287:9005:0800 Adaptec Themisto (Jupiter)
9005:0200:9005:0200 Adaptec Themisto (Jupiter)
9005:0286:9005:0800 Adaptec Callisto (Jupiter)
9005:0285:17aa:0287 Legend S230 (Vulcan)
9005:0285:9005:0290 IBM ServeRAID 7t (Jaguar)
9005:0285:1014:02F2 IBM ServeRAID 8i (AvonPark)
- 9005:0285:1014:0312 IBM ServeRAID 8i (AvonParkLite)
9005:0286:1014:9540 IBM ServeRAID 8k/8k-l4 (AuroraLite)
9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora)
- 9005:0286:1014:034d IBM ServeRAID 8s (Hurricane)
- 9005:0286:9005:029e ICP ICP9024R0 (Lancer)
- 9005:0286:9005:029f ICP ICP9014R0 (Lancer)
+ 9005:0285:1014:034d IBM ServeRAID 8s (Marauder-E)
+ 9005:0286:9005:029e ICP ICP9024RO (Lancer)
+ 9005:0286:9005:029f ICP ICP9014RO (Lancer)
9005:0286:9005:02a0 ICP ICP9047MA (Lancer)
9005:0286:9005:02a1 ICP ICP9087MA (Lancer)
- 9005:0286:9005:02a3 ICP ICP5445AU (Hurricane44)
- 9005:0286:9005:02a4 ICP ICP9085LI (Marauder-X)
- 9005:0286:9005:02a5 ICP ICP5085BR (Marauder-E)
+ 9005:0285:9005:02a4 ICP ICP9085LI (Marauder-X)
+ 9005:0285:9005:02a5 ICP ICP5085BR (Marauder-E)
9005:0286:9005:02a6 ICP ICP9067MA (Intruder-6)
- 9005:0286:9005:02a9 ICP ICP5085AU (Hurricane80)
- 9005:0286:9005:02aa ICP ICP5045AU (Hurricane40)
- 9005:0286:9005:02b4 ICP ICP5045AL (Hurricane40lm)
+ 9005:0285:9005:02b2 ICP (Voodoo 8 internal 8 external)
+ 9005:0285:9005:02b8 ICP ICP5445SL (Voodoo44)
+ 9005:0285:9005:02b9 ICP ICP5085SL (Voodoo80)
+ 9005:0285:9005:02ba ICP ICP5805SL (Voodoo08)
+ 9005:0285:9005:02bf ICP ICP5045BL (Marauder40LP)
+ 9005:0285:9005:02c0 ICP ICP5085BL (Marauder80LP)
+ 9005:0285:9005:02c8 ICP ICP5805BL (Marauder08ELP)
+ 9005:0285:9005:02c1 ICP ICP5125BR (Marauder120)
+ 9005:0285:9005:02c2 ICP ICP5165BR (Marauder160)
+ 9005:0285:9005:02c5 ICP ICP5125SL (Voodoo120)
+ 9005:0285:9005:02c6 ICP ICP5165SL (Voodoo160)
+ 9005:0286:9005:02ab (Typhoon40)
+ 9005:0286:9005:02ad (Aurora ARK)
+ 9005:0286:9005:02ae (Aurora Lite ARK)
+ 9005:0285:9005:02b0 (Sunrise Lake ARK)
+ 9005:0285:9005:02b1 Adaptec (Voodoo 8 internal 8 external)
People
-------------------------
<informalexample>
<programlisting>
<![CDATA[
- struct mychip *chip = (struct mychip *)card->private_data;
+ struct mychip *chip = card->private_data;
]]>
</programlisting>
</informalexample>
/* release the irq */
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
/* release the i/o ports & memory */
pci_release_regions(chip->pci);
/* disable the PCI entry */
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_mychip_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
+ IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
<programlisting>
<![CDATA[
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
]]>
</programlisting>
</informalexample>
TTY side interfaces:
+open() - Called when the line discipline is attached to
+ the terminal. No other call into the line
+ discipline for this tty will occur until it
+ completes successfully. Can sleep.
+
close() - This is called on a terminal when the line
discipline is being unplugged. At the point of
execution no further users will enter the
ldisc code for this tty. Can sleep.
-open() - Called when the line discipline is attached to
- the terminal. No other call into the line
- discipline for this tty will occur until it
- completes successfully. Can sleep.
+hangup() - Called when the tty line is hung up.
+ The line discipline should cease I/O to the tty.
+ No further calls into the ldisc code will occur.
+ Can sleep.
write() - A process is writing data through the line
discipline. Multiple write calls are serialized
by the tty layer for the ldisc. May sleep.
-flush_buffer() - May be called at any point between open and close.
+flush_buffer() - (optional) May be called at any point between
+ open and close, and instructs the line discipline
+ to empty its input buffer.
-chars_in_buffer() - Report the number of bytes in the buffer.
+chars_in_buffer() - (optional) Report the number of bytes in the input
+ buffer.
-set_termios() - Called on termios structure changes. The caller
- passes the old termios data and the current data
- is in the tty. Called under the termios semaphore so
- allowed to sleep. Serialized against itself only.
+set_termios() - (optional) Called on termios structure changes.
+ The caller passes the old termios data and the
+ current data is in the tty. Called under the
+ termios semaphore so allowed to sleep. Serialized
+ against itself only.
read() - Move data from the line discipline to the user.
Multiple read calls may occur in parallel and the
this function. In such a situation defer it.
+Driver Access
+
+Line discipline methods can call the following methods of the underlying
+hardware driver through the function pointers within the tty->driver
+structure:
+
+write() Write a block of characters to the tty device.
+ Returns the number of characters accepted.
+
+put_char() Queues a character for writing to the tty device.
+ If there is no room in the queue, the character is
+ ignored.
+
+flush_chars() (Optional) If defined, must be called after
+ queueing characters with put_char() in order to
+ start transmission.
+
+write_room() Returns the numbers of characters the tty driver
+ will accept for queueing to be written.
+
+ioctl() Invoke device specific ioctl.
+ Expects data pointers to refer to userspace.
+ Returns ENOIOCTLCMD for unrecognized ioctl numbers.
+
+set_termios() Notify the tty driver that the device's termios
+ settings have changed. New settings are in
+ tty->termios. Previous settings should be passed in
+ the "old" argument.
+
+throttle() Notify the tty driver that input buffers for the
+ line discipline are close to full, and it should
+ somehow signal that no more characters should be
+ sent to the tty.
+
+unthrottle() Notify the tty driver that characters can now be
+ sent to the tty without fear of overrunning the
+ input buffers of the line disciplines.
+
+stop() Ask the tty driver to stop outputting characters
+ to the tty device.
+
+start() Ask the tty driver to resume sending characters
+ to the tty device.
+
+hangup() Ask the tty driver to hang up the tty device.
+
+break_ctl() (Optional) Ask the tty driver to turn on or off
+ BREAK status on the RS-232 port. If state is -1,
+ then the BREAK status should be turned on; if
+ state is 0, then BREAK should be turned off.
+ If this routine is not implemented, use ioctls
+ TIOCSBRK / TIOCCBRK instead.
+
+wait_until_sent() Waits until the device has written out all of the
+ characters in its transmitter FIFO.
+
+send_xchar() Send a high-priority XON/XOFF character to the device.
+
+
+Flags
+
+Line discipline methods have access to tty->flags field containing the
+following interesting flags:
+
+TTY_THROTTLED Driver input is throttled. The ldisc should call
+ tty->driver->unthrottle() in order to resume
+ reception when it is ready to process more data.
+
+TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's
+ write_wakeup() method in order to resume
+ transmission when it can accept more data
+ to transmit.
+
+TTY_IO_ERROR If set, causes all subsequent userspace read/write
+ calls on the tty to fail, returning -EIO.
+
+TTY_OTHER_CLOSED Device is a pty and the other side has closed.
+
+TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into
+ smaller chunks.
+
+
Locking
Callers to the line discipline functions from the tty layer are required to
Bill Ryder <bryder@sgi.com>
Thomas Sailer <sailer@ife.ee.ethz.ch>
Gregory P. Smith <greg@electricrain.com>
- Linus Torvalds <torvalds@osdl.org>
+ Linus Torvalds <torvalds@linux-foundation.org>
Roman Weissgaerber <weissg@vienna.at>
<Kazuki.Yasumatsu@fujixerox.co.jp>
3Com USR ISDN Pro TA
+ Some cell phones also connect via USB. I know the following phones work:
+
+ SonyEricsson K800i
+
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
thus won't work with this drivers. Check for ACM compliance before buying.
apicmaintimer. Useful when your PIT timer is totally
broken.
+ disable_8254_timer / enable_8254_timer
+ Enable interrupt 0 timer routing over the 8254 in addition to over
+ the IO-APIC. The kernel tries to set a sensible default.
+
Early Console
syntax: earlyprintk=vga
ACPI
P: Len Brown
M: len.brown@intel.com
+M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-S: Maintained
+S: Supported
+
+ACPI BATTERY DRIVERS
+P: Vladimir P. Lebedev
+M: vladimir.p.lebedev@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
+
+ACPI EC DRIVER
+P: Alexey Starikovskiy
+M: alexey.y.starikovskiy@linux.intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
+
+ACPI FAN DRIVER
+P: Konstantin A. Karasyov
+M: konstantin.a.karasyov@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
ACPI PCI HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
+
+ACPI THERMAL DRIVER
+P: Konstantin A. Karasyov
+M: konstantin.a.karasyov@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
AD1816 SOUND DRIVER
P: Thorsten Knabe
M: spyro@f2s.com
S: Maintained
+ARM/ADI ROADRUNNER MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/ADS SPHERE MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/AJECO 1ARM MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
P: Andrew Victor
M: andrew@sanpeople.com
W: http://maxim.org.za/at91_26.html
S: Maintained
+ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/HP JORNADA 7XX MACHINE SUPPORT
P: Kristoffer Ericson
M: kristoffer_e1@hotmail.com
W: www.jlime.com
S: Maintained
+ARM/INTEL IOP32X ARM ARCHITECTURE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+P: Dan Williams
+M: dan.j.williams@intel.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Supported
+
+ARM/INTEL IOP33X ARM ARCHITECTURE
+P: Dan Williams
+M: dan.j.williams@intel.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Supported
+
+ARM/INTEL IOP13XX ARM ARCHITECTURE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+P: Dan Williams
+M: dan.j.williams@intel.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Supported
+
+ARM/INTEL IQ81342EX MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+P: Dan Williams
+M: dan.j.williams@intel.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Supported
+
+ARM/INTEL IXP2000 ARM ARCHITECTURE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/INTEL IXDP2850 MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/INTEL IXP23XX ARM ARCHITECTURE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/INTEL XSC3 (MANZANO) ARM CORE
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+P: Dan Williams
+M: dan.j.williams@intel.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Supported
+
+ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/LOGICPD PXA270 MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/TOSA MACHINE SUPPORT
P: Dirk Opfer
M: dirk@opfer-online.de
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/RADISYS ENP2611 MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: alex@shark-linux.de
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
-M: ben-s3c2410@fluff.org
+M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
ARM/S3C2440 ARM ARCHITECTURE
P: Ben Dooks
-M: ben-s3c2440@fluff.org
+M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
+ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
+ARM/THECUS N2100 MACHINE SUPPORT
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
S: Maintained
ASUS ACPI EXTRAS DRIVER
+P: Corentin Chary
+M: corentincj@iksaif.net
P: Karol Kozimor
M: sziwan@users.sourceforge.net
-P: Julien Lerouge
-M: julien.lerouge@free.fr
L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
-W: http://julien.lerouge.free.fr
+W: http://xf.iksaif.net/acpi4asus
S: Maintained
ATA OVER ETHERNET DRIVER
L: linux-kernel@vger.kernel.org
S: Supported
+CIRRUS LOGIC EP93XX ETHERNET DRIVER
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: netdev@vger.kernel.org
+S: Maintained
+
CIRRUS LOGIC GENERIC FBDEV DRIVER
P: Jeff Garzik
M: jgarzik@pobox.com
L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Odd Fixes
+CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: linux-usb-devel@lists.sourceforge.net
+S: Maintained
+
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
P: Cirrus Logic Corporation (kernel 2.2 driver)
M: Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
S: Maintained
DOCBOOK FOR DOCUMENTATION
-P: Martin Waitz
-M: tali@admingilde.org
P: Randy Dunlap
M: rdunlap@xenotime.net
-T: git http://tali.admingilde.org/git/linux-docbook.git
S: Maintained
DOCKING STATION DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-acpi@vger.kernel.org
-S: Maintained
+S: Supported
DOUBLETALK DRIVER
P: James R. Van Zandt
S: Maintained
DSCC4 DRIVER
-P: François Romieu
-M: romieu@cogenit.fr
-M: romieu@ensta.fr
+P: Francois Romieu
+M: romieu@fr.zoreil.com
+L: netdev@vger.kernel.org
S: Maintained
DVB SUBSYSTEM AND DRIVERS
ETHERNET BRIDGE
P: Stephen Hemminger
-M: shemminger@osdl.org
+M: shemminger@linux-foundation.org
L: bridge@osdl.org
W: http://bridge.sourceforge.net/
S: Maintained
W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
S: Maintained
+HID CORE LAYER
+P: Jiri Kosina
+M: jkosina@suse.cz
+L: linux-input@atrey.karlin.mff.cuni.cz
+S: Maintained
+
HIGH-SPEED SCC DRIVER FOR AX.25
P: Klaus Kudielka
M: klaus.kudielka@ieee.org
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
+IBM ACPI EXTRAS DRIVER
+P: Henrique de Moraes Holschuh
+M: ibm-acpi@hmh.eng.br
+L: ibm-acpi-devel@lists.sourceforge.net
+W: http://ibm-acpi.sourceforge.net
+W: http://thinkwiki.org/wiki/Ibm-acpi
+T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
+S: Maintained
+
SN-IA64 (Itanium) SUB-PLATFORM
P: Jes Sorensen
M: jes@sgi.com
W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
-IDE DRIVER [GENERAL]
+IDE SUBSYSTEM
P: Bartlomiej Zolnierkiewicz
-M: B.Zolnierkiewicz@elka.pw.edu.pl
-L: linux-kernel@vger.kernel.org
+M: bzolnier@gmail.com
L: linux-ide@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git
+T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
S: Maintained
IDE/ATAPI CDROM DRIVER
-P: Jens Axboe
-M: axboe@kernel.dk
-L: linux-kernel@vger.kernel.org
-W: http://www.kernel.dk
+P: Alan Cox
+M: alan@lxorguk.ukuu.org.uk
+L: linux-ide@vger.kernel.org
S: Maintained
IDE/ATAPI FLOPPY DRIVERS
M: dsaxena@plexity.net
S: Maintained
+INTEL IXP2000 ETHERNET DRIVER
+P: Lennert Buytenhek
+M: kernel@wantstofly.org
+L: netdev@vger.kernel.org
+S: Maintained
+
INTEL PRO/100 ETHERNET SUPPORT
P: John Ronciak
M: john.ronciak@intel.com
KERNEL NFSD
P: Neil Brown
-M: neilb@cse.unsw.edu.au
+M: neilb@suse.de
L: nfs@lists.sourceforge.net
W: http://nfs.sourceforge.net/
-W: http://www.cse.unsw.edu.au/~neilb/patches/linux-devel/
-S: Maintained
+S: Supported
KERNEL VIRTUAL MACHINE (KVM)
P: Avi Kivity
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
P: Eric Moore
-M: Eric.Moore@lsil.com
-M: support@lsil.com
-L: mpt_linux_developer@lsil.com
+M: Eric.Moore@lsi.com
+M: support@lsi.com
+L: mpt_linux_developer@lsi.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
NETEM NETWORK EMULATOR
P: Stephen Hemminger
-M: shemminger@osdl.org
+M: shemminger@linux-foundation.org
L: netem@osdl.org
S: Maintained
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
M: ambx1@neo.rr.com
S: Maintained
+PNXxxxx I2C DRIVER
+P: Vitaly Wool
+M: vitalywool@gmail.com
+L: i2c@lm-sensors.org
+S: Maintained
+
PPP PROTOCOL DRIVERS AND COMPRESSORS
P: Paul Mackerras
M: paulus@samba.org
W: http://www.pnd-pc.demon.co.uk/promise/
S: Maintained
+PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
+P: Mikael Pettersson
+M: mikpe@it.uu.se
+L: linux-ide@vger.kernel.org
+S: Maintained
+
PS3 PLATFORM SUPPORT
P: Geoff Levand
M: geoffrey.levand@am.sony.com
P: Ingo Molnar
M: mingo@redhat.com
P: Neil Brown
-M: neilb@cse.unsw.edu.au
+M: neilb@suse.de
L: linux-raid@vger.kernel.org
-S: Maintained
+S: Supported
SOFTWARE SUSPEND:
P: Pavel Machek
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
P: Pierre Ossman
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
P: Stephen Hemminger
-M: shemminger@osdl.org
+M: shemminger@linux-foundation.org
L: netdev@vger.kernel.org
S: Maintained
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
S: Maintained
USB HID/HIDBP DRIVERS
-P: Vojtech Pavlik
-M: vojtech@suse.cz
-L: linux-usb-users@lists.sourceforge.net
+P: Jiri Kosina
+M: jkosina@suse.cz
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
-P: Roman Weissgaerber
-M: weissg@vienna.at
+P: David Brownell
+M: dbrownell@users.sourceforge.net
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
L: i2c@lm-sensors.org
S: Maintained
+VIA VELOCITY NETWORK DRIVER
+P: Francois Romieu
+M: romieu@fr.zoreil.com
+L: netdev@vger.kernel.org
+S: Maintained
+
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 20
-EXTRAVERSION =-rc1
-NAME=Avast! A bilge rat!
+EXTRAVERSION =-rc6
+NAME = Homicidal Dwarf Hamster
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
- @if [ -r include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+ echo ' (default: $(INSTALL_HDR_PATH))'; \
fi
- @echo ' (default: $(INSTALL_HDR_PATH))'
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
- @if [ -r include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
echo ' headers_check - Sanity check on exported headers'; \
fi
@echo ''
the file MAINTAINERS to see if there is a particular person associated
with the part of the kernel that you are having trouble with. If there
isn't anyone listed there, then the second best thing is to mail
- them to me (torvalds@osdl.org), and possibly to any other relevant
- mailing-list or to the newsgroup.
+ them to me (torvalds@linux-foundation.org), and possibly to any other
+ relevant mailing-list or to the newsgroup.
- In all bug-reports, *please* tell what kernel you are talking about,
how to duplicate the problem, and what your setup is (use your common
* Power off function, if any
*/
void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
void
cpu_idle(void)
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1-git9
-# Sat Jul 15 15:08:10 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:24 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
#
CONFIG_MACH_ADSSPHERE=y
CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9302A=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=y
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
#
# Multi-device support (RAID and LVM)
#
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_EP93XX_ETH=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
-# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Fri Dec 1 10:51:01 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:38:01 2006
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# Block layer
#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
#
# PCCARD (PCMCIA/CardBus) support
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_USER=y
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:18 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:37:52 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_IMX is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
+CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:42 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:34 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 15:28:50 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:39 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP23XX is not set
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
#
# Kernel Features
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Wan interfaces
#
CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:13:35 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:45 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
CONFIG_IO_36=y
#
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Wan interfaces
#
CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:15:23 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:51 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
#
# Processor Type
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
#
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
#
# USB support
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:16:20 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:18 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
#
# Atmel AT91 System-on-Chip
#
-
-#
-# Atmel AT91 Processors
-#
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_KAFA is not set
+#
+# AT91 Board Options
+#
+
#
# AT91 Feature Selections
#
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-#
-# Ftape, the floppy tape device driver
-#
-
#
# PCMCIA character devices
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
#
# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91RM9200=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_TIFM_SD is not set
#
# Real Time Clock
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
#
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
CALL(sys_ni_syscall) /* was sys_profil */
CALL(sys_statfs)
/* 100 */ CALL(sys_fstatfs)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* sys_ioperm */
CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
CALL(sys_syslog)
CALL(sys_setitimer)
/* 120 */ CALL(sys_clone_wrapper)
CALL(sys_setdomainname)
CALL(sys_newuname)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* modify_ldt */
CALL(sys_adjtimex)
/* 125 */ CALL(sys_mprotect)
CALL(sys_sigprocmask)
CALL(sys_bdflush)
/* 135 */ CALL(sys_sysfs)
CALL(sys_personality)
- CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */
+ CALL(sys_ni_syscall) /* reserved for afs_syscall */
CALL(sys_setfsuid16)
CALL(sys_setfsgid16)
/* 140 */ CALL(sys_llseek)
CALL(sys_arm_mremap)
CALL(sys_setresuid16)
/* 165 */ CALL(sys_getresuid16)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* vm86 */
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
CALL(sys_nfsservctl)
/* 185 */ CALL(sys_capset)
CALL(sys_sigaltstack_wrapper)
CALL(sys_sendfile)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* getpmsg */
+ CALL(sys_ni_syscall) /* putpmsg */
/* 190 */ CALL(sys_vfork_wrapper)
CALL(sys_getrlimit)
CALL(sys_mmap2)
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
+/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
+ CALL(sys_ni_syscall) /* eventually ppoll */
+ CALL(sys_unshare)
+ CALL(sys_set_robust_list)
+ CALL(sys_get_robust_list)
+/* 340 */ CALL(sys_splice)
+ CALL(sys_arm_sync_file_range)
+ CALL(sys_tee)
+ CALL(sys_vmsplice)
+ CALL(sys_move_pages)
+/* 345 */ CALL(sys_getcpu)
+ CALL(sys_ni_syscall) /* eventually epoll_pwait */
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
usr_entry
tst r3, #PSR_T_BIT @ Thumb mode?
- bne fpundefinstr @ ignore FP
+ bne __und_usr_unknown @ ignore FP
sub r4, r2, #4
@
@
1: ldrt r0, [r4]
adr r9, ret_from_exception
- adr lr, fpundefinstr
+ adr lr, __und_usr_unknown
@
@ fallthrough to call_fpe
@
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
+ * r9 = normal "successful" return address
* r10 = this threads thread_info structure.
+ * lr = unrecognised instruction return address
*/
call_fpe:
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
.data
ENTRY(fp_enter)
- .word fpundefinstr
+ .word no_fp
.text
-fpundefinstr:
+no_fp: mov pc, lr
+
+__und_usr_unknown:
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
#include <asm/thread_info.h>
#include <asm/system.h>
+#if (PHYS_OFFSET & 0x001fffff)
+#error "PHYS_OFFSET must be at an even 2MiB boundary!"
+#endif
+
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
* Then map first 1MB of ram in case it contains our boot params.
*/
add r0, r4, #PAGE_OFFSET >> 18
- orr r6, r7, #PHYS_OFFSET
+ orr r6, r7, #(PHYS_OFFSET & 0xff000000)
+ orr r6, r6, #(PHYS_OFFSET & 0x00e00000)
str r6, [r0]
#ifdef CONFIG_XIP_KERNEL
"edsp",
"java",
"iwmmxt",
+ "crunch",
NULL
};
{
return sys_fadvise64_64(fd, offset, len, advice);
}
+
+/*
+ * Yet more syscall fsckage - we can't fit sys_sync_file_range's
+ * arguments into the available registers with EABI. So, let's
+ * create an ARM specific syscall for this which has _sane_
+ * arguments. (This incidentally also has an ABI-independent
+ * argument layout.)
+ */
+asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags,
+ loff_t offset, loff_t nbytes)
+{
+ return sys_sync_file_range(fd, offset, nbytes, flags);
+}
#include <linux/timer.h>
#include <linux/irq.h>
+#include <linux/mc146818rtc.h>
+
#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/mach/time.h>
return (unsigned long long)jiffies * (1000000000 / HZ);
}
+/*
+ * An implementation of printk_clock() independent from
+ * sched_clock(). This avoids non-bootable kernels when
+ * printk_clock is enabled.
+ */
+unsigned long long printk_clock(void)
+{
+ return (unsigned long long)(jiffies - INITIAL_JIFFIES) *
+ (1000000000 / HZ);
+}
+
static unsigned long next_rtc_update;
/*
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/traps.h>
+#include <asm/io.h>
#include "ptrace.h"
#include "signal.h"
at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
/* nWAIT is _not_ a default setting */
- at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
+ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
cf_data = *data;
platform_device_register(&at91rm9200_cf_device);
#include <asm/mach/map.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
#include "generic.h"
#include "clock.h"
static void at91sam9260_reset(void)
{
-#warning "Implement CPU reset"
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
#include <asm/mach/map.h>
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
#include "generic.h"
#include "clock.h"
static void at91sam9261_reset(void)
{
-#warning "Implement CPU reset"
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
#include "generic.h"
static int gpio_irq_set_wake(unsigned pin, unsigned state)
{
unsigned mask = pin_to_mask(pin);
+ unsigned bank = (pin - PIN_BASE) / 32;
- pin -= PIN_BASE;
- pin /= 32;
-
- if (unlikely(pin >= MAX_GPIO_BANKS))
+ if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
if (state)
- wakeups[pin] |= mask;
+ wakeups[bank] |= mask;
else
- wakeups[pin] &= ~mask;
+ wakeups[bank] &= ~mask;
+
+ set_irq_wake(gpio[bank].id, state);
return 0;
}
for (i = 0; i < gpio_banks; i++) {
u32 pio = gpio[i].offset;
- /*
- * Note: drivers should have disabled GPIO interrupts that
- * aren't supposed to be wakeup sources.
- * But that is not much good on ARM..... disable_irq() does
- * not update the hardware immediately, so the hardware mask
- * (IMR) has the wrong value (not current, too much is
- * permitted).
- *
- * Our workaround is to disable all non-wakeup IRQs ...
- * which is exactly what correct drivers asked for in the
- * first place!
- */
backups[i] = at91_sys_read(pio + PIO_IMR);
at91_sys_write(pio + PIO_IDR, backups[i]);
at91_sys_write(pio + PIO_IER, wakeups[i]);
- if (!wakeups[i]) {
- disable_irq_wake(gpio[i].id);
- at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
- } else {
- enable_irq_wake(gpio[i].id);
+ if (!wakeups[i])
+ clk_disable(gpio[i].clock);
+ else {
#ifdef CONFIG_PM_DEBUG
- printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
#endif
}
}
for (i = 0; i < gpio_banks; i++) {
u32 pio = gpio[i].offset;
+ if (!wakeups[i])
+ clk_enable(gpio[i].clock);
+
at91_sys_write(pio + PIO_IDR, wakeups[i]);
at91_sys_write(pio + PIO_IER, backups[i]);
- at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
}
}
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
+
+#ifdef CONFIG_CRUNCH
+ elf_hwcap |= HWCAP_CRUNCH;
+#endif
}
long sysclk;
unsigned int bclk_div = 1;
+ /*
+ * Some governors do not respects CPU and policy lower limits
+ * which leads to bad things (division by zero etc), ensure
+ * that such things do not happen.
+ */
+ if(target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+
+ if(target_freq < policy->min)
+ target_freq = policy->min;
+
freq = target_freq * 1000;
pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = 8000;
policy->cpuinfo.max_freq = 200000;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /* Manual states, that PLL stabilizes in two CLK32 periods */
+ policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
return 0;
}
#include <asm/hardware.h>
#include <asm/io.h>
+void * __iomem __iop13xx_io(unsigned long io_addr)
+{
+ void __iomem * io_virt;
+
+ switch (io_addr) {
+ case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
+ io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
+ break;
+ case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
+ io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
+ break;
+ default:
+ BUG();
+ }
+
+ return io_virt;
+}
+EXPORT_SYMBOL(__iop13xx_io);
+
void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
unsigned long flags)
{
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .phys_io = PHYS_IO,
- .io_pg_offst = IO_PG_OFFSET,
+ .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE,
+ .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
- .boot_params = BOOT_PARAM_OFFSET,
.init_machine = iq81340mc_init,
MACHINE_END
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .phys_io = PHYS_IO,
- .io_pg_offst = IO_PG_OFFSET,
+ .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE,
+ .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
- .boot_params = BOOT_PARAM_OFFSET,
.init_machine = iq81340sc_init,
MACHINE_END
iop13xx_cp6_restore(cp_flags);
}
-static struct irqchip iop13xx_irqchip0 = {
+static struct irq_chip iop13xx_irqchip1 = {
+ .name = "IOP13xx-1",
.ack = iop13xx_irq_mask0,
.mask = iop13xx_irq_mask0,
.unmask = iop13xx_irq_unmask0,
};
-static struct irqchip iop13xx_irqchip1 = {
+static struct irq_chip iop13xx_irqchip2 = {
+ .name = "IOP13xx-2",
.ack = iop13xx_irq_mask1,
.mask = iop13xx_irq_mask1,
.unmask = iop13xx_irq_unmask1,
};
-static struct irqchip iop13xx_irqchip2 = {
+static struct irq_chip iop13xx_irqchip3 = {
+ .name = "IOP13xx-3",
.ack = iop13xx_irq_mask2,
.mask = iop13xx_irq_mask2,
.unmask = iop13xx_irq_unmask2,
};
-static struct irqchip iop13xx_irqchip3 = {
+static struct irq_chip iop13xx_irqchip4 = {
+ .name = "IOP13xx-4",
.ack = iop13xx_irq_mask3,
.mask = iop13xx_irq_mask3,
.unmask = iop13xx_irq_unmask3,
for(i = 0; i < NR_IOP13XX_IRQS; i++) {
if (i < 32)
- set_irq_chip(i, &iop13xx_irqchip0);
- else if (i < 64)
set_irq_chip(i, &iop13xx_irqchip1);
- else if (i < 96)
+ else if (i < 64)
set_irq_chip(i, &iop13xx_irqchip2);
- else
+ else if (i < 96)
set_irq_chip(i, &iop13xx_irqchip3);
+ else
+ set_irq_chip(i, &iop13xx_irqchip4);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
#ifdef CONFIG_MTD_PHYSMAP
iq8134x_flash_resource.end = iq8134x_flash_resource.start +
- iq8134x_probe_flash_size();
+ iq8134x_probe_flash_size() - 1;
if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
iop13xx_devices[plat_idx++] = &iq8134x_flash;
else
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <asm/io.h>
+#include <asm/mach-types.h>
#include <asm/arch/gpmc.h>
#undef DEBUG
int cs;
unsigned long boot_rom_space = 0;
- if (cpu_is_omap242x()) {
- u32 l;
- l = omap_readl(OMAP242X_CONTROL_STATUS);
- /* In case of internal boot the 1st MB is redirected to the
- * boot ROM memory space.
- */
- if (l & (1 << 3))
- boot_rom_space = BOOT_ROM_SPACE;
- } else
- /* We assume internal boot if the mode can't be
- * determined.
- */
- boot_rom_space = BOOT_ROM_SPACE;
+ /* never allocate the first page, to facilitate bug detection;
+ * even if we didn't boot from ROM.
+ */
+ boot_rom_space = BOOT_ROM_SPACE;
+ /* In apollon the CS0 is mapped as 0x0000 0000 */
+ if (machine_is_omap_apollon())
+ boot_rom_space = 0;
gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
gpmc_mem_root.end = GPMC_MEM_END;
/*
* 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for
* any value of CLOCK_TICK_RATE. Max value is in the 80 thousand
- * years range which is nice, but with higher computation cost.
+ * years range and truncation to unsigned long long limits it to
+ * sched_clock's max range of ~584 years. This is nice but with
+ * higher computation cost.
*/
{
union {
.handler = pxa_timer_interrupt,
};
-cycle_t pxa_get_cycles(void)
+static cycle_t pxa_get_cycles(void)
{
return OSCR;
}
OSMR0 = OSCR + LATCH; /* set initial match */
local_irq_restore(flags);
- /* on PXA OSCR runs continiously and is not written to, so we can use it
- * as clock source directly.
+ /*
+ * OSCR runs continuously on PXA and is not written to,
+ * so we can use it as clock source directly.
*/
clocksource_pxa.mult =
clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift);
clocksource_register(&clocksource_pxa);
-
}
#ifdef CONFIG_NO_IDLE_HZ
config MACH_AML_M5900
bool "AML M5900 Series"
select CPU_S3C2410
+ select PM_SIMTEC if PM
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
+ select PM_SIMTEC if PM
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
+ select PM_SIMTEC if PM
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select PM_SIMTEC if PM
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
config PM_H1940
bool
- depends on PM
help
Internal node for H1940 and related PM
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
- select PM_H1940
+ select PM_H1940 if PM
help
Say Y here if you are using the HP IPAQ H1940
config MACH_VR1000
bool "Thorcom VR1000"
+ select PM_SIMTEC if PM
select CPU_S3C2410
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
- select PM_H1940
+ select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
config S3C2410_PM
bool
- depends on CONFIG_PM
help
Power Management code common to S3C2410 and better
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
config S3C2412_PM
bool
- default y if PM
- depends on CPU_S3C2412
help
Internal config node to apply S3C2412 power management
config CPU_S3C2412
bool
depends on ARCH_S3C2410
+ select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
bool
depends on ARCH_S3C2420
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
select CPU_S3C244X
help
Support for S3C2442 Samsung Mobile CPU based systems.
config PM_SIMTEC
bool
- depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
- default y
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
/* linux/arch/arm/mach-s3c2410/dma.c
*
- * (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA core
if (chan == NULL)
return -EINVAL;
- printk("Initial dcon is %08x\n", dcon);
+ pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
dcon |= chan->dcon & dma_sel.dcon_mask;
- printk("New dcon is %08x\n", dcon);
+ pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
switch (xferunit) {
case 1:
case S3C2410_GPIO_SFN2:
case S3C2410_GPIO_SFN3:
if (pin < S3C2410_GPIO_BANKB) {
+ function -= 1;
function &= 1;
function <<= S3C2410_GPIO_OFFSET(pin);
} else {
unsigned int s3c2410_gpio_getcfg(unsigned int pin)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long mask;
+ unsigned long val = __raw_readl(base);
if (pin < S3C2410_GPIO_BANKB) {
- mask = 1 << S3C2410_GPIO_OFFSET(pin);
+ val >>= S3C2410_GPIO_OFFSET(pin);
+ val &= 1;
+ val += 1;
} else {
- mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+ val >>= S3C2410_GPIO_OFFSET(pin)*2;
+ val &= 3;
}
- return __raw_readl(base) & mask;
+ return val | S3C2410_GPIO_INPUT;
}
EXPORT_SYMBOL(s3c2410_gpio_getcfg);
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
*/
#define irqdbf(x...)
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
-#include <linux/serial_core.h>
-
#include "clock.h"
#include "devs.h"
#include "cpu.h"
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/kthread.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/iic.h>
-#include <linux/serial_core.h>
-
#include "s3c2410.h"
#include "clock.h"
#include "devs.h"
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/mtd/map.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
static struct platform_device vr1000_led3 = {
.name = "s3c24xx_led",
- .id = 1,
+ .id = 3,
.dev = {
.platform_data = &vr1000_led3_pdata,
},
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <asm/io.h>
#include <asm/arch/map.h>
-#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <linux/crc32.h>
#include <linux/ioport.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
#include <asm/cacheflush.h>
#include <asm/hardware.h>
irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
pinstate = s3c2410_gpio_getcfg(pin);
- pinstate >>= S3C2410_GPIO_OFFSET(pin)*2;
if (!irqstate) {
- if (pinstate == 0x02)
+ if (pinstate == S3C2410_GPIO_IRQ)
DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
} else {
- if (pinstate == 0x02) {
+ if (pinstate == S3C2410_GPIO_IRQ) {
DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c2410_gpio_cfgpin(pin, 0x00);
+ s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
}
}
}
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
+#include "s3c2410.h"
#include "clock.h"
#include "cpu.h"
/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA selection
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
return s3c24xx_dma_init_map(&s3c2410_dma_sel);
}
+#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_dma_driver = {
.add = s3c2410_dma_add,
};
}
arch_initcall(s3c2410_dma_init);
+#endif
+#if defined(CONFIG_CPU_S3C2442)
/* S3C2442 DMA contains the same selection table as the S3C2410 */
-
static struct sysdev_driver s3c2442_dma_driver = {
.add = s3c2410_dma_add,
};
}
arch_initcall(s3c2442_dma_init);
-
+#endif
}
-int s3c2410_pm_resume(struct sys_device *dev)
+static int s3c2410_pm_resume(struct sys_device *dev)
{
unsigned long tmp;
return 0;
}
+#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
}
arch_initcall(s3c2410_pm_drvinit);
+#endif
+#if defined(CONFIG_CPU_S3C2440)
static struct sysdev_driver s3c2440_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
}
arch_initcall(s3c2440_pm_drvinit);
+#endif
+#if defined(CONFIG_CPU_S3C2442)
static struct sysdev_driver s3c2442_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
}
arch_initcall(s3c2442_pm_drvinit);
+#endif
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
/* Initial IO mappings */
static struct map_desc s3c2410_iodesc[] __initdata = {
- IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(TIMER),
- IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG),
};
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
+#include "s3c2412.h"
#include "clock.h"
#include "cpu.h"
* set the correct muxing at initialisation
*/
-int s3c2412_clkcon_enable(struct clk *clk, int enable)
+static int s3c2412_clkcon_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->ctrlbit;
unsigned long clkcon;
struct clk *src_1;
};
-struct clk_init clks_src[] __initdata = {
+static struct clk_init clks_src[] __initdata = {
{
.clk = &clk_usysclk,
.bit = S3C2412_CLKSRC_USBCLK_HCLK,
/* clocks to add straight away */
-struct clk *clks[] __initdata = {
+static struct clk *clks[] __initdata = {
&clk_ext,
&clk_usb_bus,
&clk_erefclk,
/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2412 DMA selection
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map)
{
- writel(chan->regs + S3C2412_DMA_DMAREQSEL,
- map->channels[0] | S3C2412_DMAREQSEL_HW);
+ writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
+ chan->regs + S3C2412_DMA_DMAREQSEL);
}
static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(TIMER),
- IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG),
};
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
- struct clk *clk_h;
- struct clk *clk_p;
- struct clk *clk_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+ struct clk *clock_upll;
printk("S3C2440: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
- clk_p = clk_get(NULL, "pclk");
- clk_h = clk_get(NULL, "hclk");
- clk_upll = clk_get(NULL, "upll");
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
return -EINVAL;
}
/* check rate of UPLL, and if it is near 96MHz, then change
* to using half the UPLL rate for the system */
- if (clk_get_rate(clk_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
mutex_lock(&clocks_mutex);
mutex_unlock(&clocks_mutex);
}
- s3c2440_clk_cam.parent = clk_h;
- s3c2440_clk_ac97.parent = clk_p;
- s3c2440_clk_cam_upll.parent = clk_upll;
+ s3c2440_clk_cam.parent = clock_h;
+ s3c2440_clk_ac97.parent = clock_p;
+ s3c2440_clk_cam_upll.parent = clock_upll;
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2440 DMA selection
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
-
#include "s3c2440.h"
-#include "clock.h"
#include "devs.h"
#include "cpu.h"
-#include "pm.h"
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 24-Aug-2004 BJD Start of S3C2440 CPU support
- * 04-Nov-2004 BJD Added s3c2440_init_uarts()
- * 04-Jan-2005 BJD Moved uart init to cpu code
- * 10-Jan-2005 BJD Moved 2440 specific init here
- * 14-Jan-2005 BJD Split the clock initialisation code
*/
#ifdef CONFIG_CPU_S3C2440
-
extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2440_init_clocks(int xtal);
-
#else
-#define s3c2440_init_clocks NULL
-#define s3c2440_init_uarts NULL
-#define s3c2440_map_io NULL
#define s3c2440_init NULL
#endif
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
- struct clk *clk_h;
- struct clk *clk_p;
- struct clk *clk_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+ struct clk *clock_upll;
printk("S3C2442: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
- clk_p = clk_get(NULL, "pclk");
- clk_h = clk_get(NULL, "hclk");
- clk_upll = clk_get(NULL, "upll");
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
return -EINVAL;
}
/* check rate of UPLL, and if it is near 96MHz, then change
* to using half the UPLL rate for the system */
- if (clk_get_rate(clk_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
mutex_lock(&clocks_mutex);
mutex_unlock(&clocks_mutex);
}
- s3c2442_clk_cam.parent = clk_h;
- s3c2442_clk_cam_upll.parent = clk_upll;
+ s3c2442_clk_cam.parent = clock_h;
+ s3c2442_clk_cam_upll.parent = clock_upll;
s3c24xx_register_clock(&s3c2442_clk_cam);
s3c24xx_register_clock(&s3c2442_clk_cam_upll);
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
#include "s3c2442.h"
-#include "clock.h"
-#include "devs.h"
#include "cpu.h"
-#include "pm.h"
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
IODESC_ENT(LCD),
- IODESC_ENT(ADC),
- IODESC_ENT(USBHOST),
};
/* uart initialisation */
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 20-Aug-2004 BJD Created
*/
extern int usb_simtec_init(void);
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include "mm.h"
void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
{
+ struct page *page = virt_to_page(kfrom);
+
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(page_mapping(page), page);
+
spin_lock(&minicache_lock);
set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long from, to;
+ struct page *page = virt_to_page(kfrom);
+
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(page_mapping(page), page);
/*
* Discard data in the kernel mapping for the new page.
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include "mm.h"
void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
{
+ struct page *page = virt_to_page(kfrom);
+
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(page_mapping(page), page);
+
spin_lock(&minicache_lock);
set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
}
}
EXPORT_SYMBOL(flush_dcache_page);
+
+/*
+ * Flush an anonymous page so that users of get_user_pages()
+ * can safely access the data. The expected sequence is:
+ *
+ * get_user_pages()
+ * -> flush_anon_page
+ * memcpy() to/from page
+ * if written to page, flush_dcache_page()
+ */
+void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
+{
+ unsigned long pfn;
+
+ /* VIPT non-aliasing caches need do nothing */
+ if (cache_is_vipt_nonaliasing())
+ return;
+
+ /*
+ * Write back and invalidate userspace mapping.
+ */
+ pfn = page_to_pfn(page);
+ if (cache_is_vivt()) {
+ flush_cache_page(vma, vmaddr, pfn);
+ } else {
+ /*
+ * For aliasing VIPT, we can flush an alias of the
+ * userspace address only.
+ */
+ flush_pfn_alias(pfn, vmaddr);
+ }
+
+ /*
+ * Invalidate kernel mapping. No data should be contained
+ * in this mapping of the page. FIXME: this is overkill
+ * since we actually ask for a write-back and invalidate.
+ */
+ __cpuc_flush_dcache_page(page_address(page));
+}
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(node) {
+ pg_data_t *n = NODE_DATA(node);
+ struct page *map = n->node_mem_map - n->node_start_pfn;
+
for_each_nodebank (i,mi,node) {
unsigned int pfn1, pfn2;
struct page *page, *end;
- pfn1 = mi->bank[i].start >> PAGE_SHIFT;
- pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
+ pfn1 = __phys_to_pfn(mi->bank[i].start);
+ pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start);
- page = NODE_MEM_MAP(node) + pfn1;
- end = NODE_MEM_MAP(node) + pfn2;
+ page = map + pfn1;
+ end = map + pfn2;
do {
total++;
if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
return NULL;
+ size = PAGE_ALIGN(size);
+
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
#ifndef CONFIG_SMP
- if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
+ if (DOMAIN_IO == 0 &&
+ (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) &&
!((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
area->flags |= VM_ARM_SECTION_MAPPING;
}
__setup("noalign", noalign_setup);
+#ifndef CONFIG_SMP
+void adjust_cr(unsigned long mask, unsigned long set)
+{
+ unsigned long flags;
+
+ mask &= ~CR_A;
+
+ set &= mask;
+
+ local_irq_save(flags);
+
+ cr_no_alignment = (cr_no_alignment & ~mask) | set;
+ cr_alignment = (cr_alignment & ~mask) | set;
+
+ set_cr((get_cr() & ~mask) | set);
+
+ local_irq_restore(flags);
+}
+#endif
+
struct mem_types {
unsigned int prot_pte;
unsigned int prot_l1;
* linux/arch/arm/mm/proc-xsc3.S
*
* Original Author: Matthew Gilbert
- * Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
*
* Copyright 2004 (C) Intel Corp.
* Copyright 2005 (c) MontaVista Software, Inc.
.type __8033x_proc_info,#object
__8033x_proc_info:
.long 0x69054010
- .long 0xffffff30
+ .long 0xfffffd30
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Dec 7 17:19:20 2006
+# Last update: Tue Jan 16 16:52:56 2007
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
hitrack MACH_HITRACK HITRACK 1208
syme1 MACH_SYME1 SYME1 1209
syhl1 MACH_SYHL1 SYHL1 1210
+empca400 MACH_EMPCA400 EMPCA400 1211
+em7210 MACH_EM7210 EM7210 1212
+htchermes MACH_HTCHERMES HTCHERMES 1213
+eti_c1 MACH_ETI_C1 ETI_C1 1214
+mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215
+ac100 MACH_AC100 AC100 1216
+sneetch MACH_SNEETCH SNEETCH 1217
+studentmate MACH_STUDENTMATE STUDENTMATE 1218
+zir2410 MACH_ZIR2410 ZIR2410 1219
+zir2413 MACH_ZIR2413 ZIR2413 1220
+dlonip3 MACH_DLONIP3 DLONIP3 1221
+instream MACH_INSTREAM INSTREAM 1222
+ambarella MACH_AMBARELLA AMBARELLA 1223
+nevis MACH_NEVIS NEVIS 1224
+htc_trinity MACH_HTC_TRINITY HTC_TRINITY 1225
+ql202b MACH_QL202B QL202B 1226
+vpac270 MACH_VPAC270 VPAC270 1227
+rd129 MACH_RD129 RD129 1228
+htcwizard MACH_HTCWIZARD HTCWIZARD 1229
+xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
+zylonite MACH_ZYLONITE ZYLONITE 1233
+gene1270 MACH_GENE1270 GENE1270 1234
do_vfp:
enable_irq
ldr r4, .LCvfp
+ ldr r11, [r10, #TI_CPU] @ CPU number
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
u32 flags;
};
+
+#ifdef CONFIG_SMP
+extern void vfp_save_state(void *location, u32 fpexc);
+#endif
@ r2 = faulted PC+4
@ r9 = successful return
@ r10 = vfp_state union
+@ r11 = CPU number
@ lr = failure return
.globl vfp_support_entry
DBGSTR1 "enable %x", r10
ldr r3, last_VFP_context_address
orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set
- ldr r4, [r3] @ last_VFP_context pointer
+ ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer
bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
cmp r4, r10
beq check_for_exception @ we are returning to the same
@ exceptions, so we can get at the
@ rest of it
+#ifndef CONFIG_SMP
@ Save out the current registers to the old thread state
+ @ No need for SMP since this is not done lazily
DBGSTR1 "save old state %p", r4
cmp r4, #0
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
+#endif
no_old_VFP_process:
DBGSTR1 "load state %p", r10
- str r10, [r3] @ update the last_VFP_context pointer
+ str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
@ Load the saved state back into the VFP
VFPFLDMIA r10 @ reload the working registers while
@ FPEXC is in a safe state
@ required. If not, the user code will
@ retry the faulted instruction
+#ifdef CONFIG_SMP
+ .globl vfp_save_state
+ .type vfp_save_state, %function
+vfp_save_state:
+ @ Save the current VFP state
+ @ r0 - save location
+ @ r1 - FPEXC
+ DBGSTR1 "save VFP state %p", r0
+ VFPFMRX r2, FPSCR @ current status
+ VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards)
+ tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
+ VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading
+ @ nonexistant reg on rev0
+ VFPFSTMIA r0 @ save the working registers
+ stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
+ mov pc, lr
+#endif
+
last_VFP_context_address:
.word last_VFP_context
void vfp_support_entry(void);
void (*vfp_vector)(void) = vfp_testing_entry;
-union vfp_state *last_VFP_context;
+union vfp_state *last_VFP_context[NR_CPUS];
/*
* Dual-use variable.
{
struct thread_info *thread = v;
union vfp_state *vfp;
+ __u32 cpu = thread->cpu;
if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
+ u32 fpexc = fmrx(FPEXC);
+
+#ifdef CONFIG_SMP
+ /*
+ * On SMP, if VFP is enabled, save the old state in
+ * case the thread migrates to a different CPU. The
+ * restoring is done lazily.
+ */
+ if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) {
+ vfp_save_state(last_VFP_context[cpu], fpexc);
+ last_VFP_context[cpu]->hard.cpu = cpu;
+ }
+ /*
+ * Thread migration, just force the reloading of the
+ * state on the new CPU in case the VFP registers
+ * contain stale data.
+ */
+ if (thread->vfpstate.hard.cpu != cpu)
+ last_VFP_context[cpu] = NULL;
+#endif
+
/*
* Always disable VFP so we can lazily save/restore the
* old state.
*/
- fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+ fmxr(FPEXC, fpexc & ~FPEXC_ENABLE);
return NOTIFY_DONE;
}
}
/* flush and release case: Per-thread VFP cleanup. */
- if (last_VFP_context == vfp)
- last_VFP_context = NULL;
+ if (last_VFP_context[cpu] == vfp)
+ last_VFP_context[cpu] = NULL;
return NOTIFY_DONE;
}
vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
}
+static void vfp_enable(void *unused)
+{
+ u32 access = get_copro_access();
+
+ /*
+ * Enable full access to VFP (cp10 and cp11)
+ */
+ set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
+}
+
+#include <linux/smp.h>
+
/*
* VFP support code initialisation.
*/
* we just need to read the VFPSID register.
*/
vfpsid = fmrx(FPSID);
+ barrier();
printk(KERN_INFO "VFP support v0.3: ");
if (VFP_arch) {
} else if (vfpsid & FPSID_NODOUBLE) {
printk("no double precision support\n");
} else {
+ smp_call_function(vfp_enable, NULL, 1, 1);
+
VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; /* Extract the architecture version */
printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Fri Oct 20 11:52:37 2006
+# Linux kernel version: 2.6.20-rc6
+# Fri Jan 26 13:12:59 2007
#
CONFIG_AVR32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# Block layer
#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_OWNERSHIP_TRACE is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_CMDLINE=""
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
#
# Misc devices
#
-# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
#
# PHY device support
#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
#
# Ethernet (1000 Mbit)
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Kernel hacking
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(clear_page);
/*
* Userspace access stuff.
*/
unsigned long cache_decay_ticks = 1;
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
smp_boot_one_cpu(cpu);
return cpu_online(cpu) ? 0 : -ENOSYS;
PHYSICAL_START.
For more details see Documentation/kdump/kdump.txt
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+ default "0x100000"
+ help
+ This gives the physical address where the kernel is loaded.
+
+ If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
+ bzImage will decompress itself to above physical address and
+ run from there. Otherwise, bzImage will run from the address where
+ it has been loaded by the boot loader and will ignore above physical
+ address.
+
+ In normal kdump cases one does not have to set/change this option
+ as now bzImage can be compiled as a completely relocatable image
+ (CONFIG_RELOCATABLE=y) and be used to load and run from a different
+ address. This option is mainly useful for the folks who don't want
+ to use a bzImage for capturing the crash dump and want to use a
+ vmlinux instead. vmlinux is not relocatable hence a kernel needs
+ to be specifically compiled to run from a specific memory area
+ (normally a reserved region) and this option comes handy.
+
+ So if you are using bzImage for capturing the crash dump, leave
+ the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
+ Otherwise if you plan to use vmlinux for capturing the crash dump
+ change this value to start of the reserved region (Typically 16MB
+ 0x1000000). In other words, it can be set based on the "X" value as
+ specified in the "crashkernel=YM@XM" command line boot parameter
+ passed to the panic-ed kernel. Typically this parameter is set as
+ crashkernel=64M@16M. Please take a look at
+ Documentation/kdump/kdump.txt for more details about crash dumps.
+
+ Usage of bzImage for capturing the crash dump is recommended as
+ one does not have to build two kernels. Same kernel can be used
+ as production kernel and capture kernel. Above option should have
+ gone away after relocatable bzImage support is introduced. But it
+ is present because there are users out there who continue to use
+ vmlinux for dump capture. This option should go away down the
+ line.
+
+ Don't change this unless you know what you are doing.
+
config RELOCATABLE
bool "Build a relocatable kernel(EXPERIMENTAL)"
depends on EXPERIMENTAL
#include <asm/page.h>
#include <asm/boot.h>
-.section ".text.head"
+.section ".text.head","ax",@progbits
.globl startup_32
startup_32:
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-git14
-# Sat Dec 9 21:23:14 2006
+# Linux kernel version: 2.6.20-rc3
+# Fri Jan 5 11:54:46 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HID_POWERBOOK is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# DMA Devices
#
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
#
# File systems
#
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
/*
* Parse Interrupt Source Override for the ACPI SCI
*/
-static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
{
if (trigger == 0) /* compatible SCI trigger is level */
trigger = 3;
return 0;
}
early_param("acpi_sci", setup_acpi_sci);
+
+int __acpi_acquire_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return (new < 3) ? -1 : 0;
+}
+
+int __acpi_release_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = old & ~0x3;
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return old & 0x1;
+}
/* The code below handles cstate entry with monitor-mwait pair on Intel*/
-struct cstate_entry_s {
+struct cstate_entry {
struct {
unsigned int eax;
unsigned int ecx;
} states[ACPI_PROCESSOR_MAX_POWER];
};
-static struct cstate_entry_s *cpu_cstate_entry; /* per CPU ptr */
+static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
int acpi_processor_ffh_cstate_probe(unsigned int cpu,
struct acpi_processor_cx *cx, struct acpi_power_register *reg)
{
- struct cstate_entry_s *percpu_entry;
+ struct cstate_entry *percpu_entry;
struct cpuinfo_x86 *c = cpu_data + cpu;
cpumask_t saved_mask;
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
{
unsigned int cpu = smp_processor_id();
- struct cstate_entry_s *percpu_entry;
+ struct cstate_entry *percpu_entry;
percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
if (c->x86_vendor != X86_VENDOR_INTEL)
return -1;
- cpu_cstate_entry = alloc_percpu(struct cstate_entry_s);
+ cpu_cstate_entry = alloc_percpu(struct cstate_entry);
return 0;
}
polling = !!(current_thread_info()->status & TS_POLLING);
if (polling) {
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
}
if (!need_resched()) {
idled = 1;
.c_init = default_init,
.c_vendor = "Unknown",
};
-static struct cpu_dev * this_cpu = &default_cpu;
+static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu;
static int __init cachesize_setup(char *str)
{
return 1;
}
-/* Common CPU init for both boot and secondary CPUs */
-static void __cpuinit _cpu_init(int cpu, struct task_struct *curr)
+void __cpuinit cpu_set_gdt(int cpu)
{
- struct tss_struct * t = &per_cpu(init_tss, cpu);
- struct thread_struct *thread = &curr->thread;
struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
/* Reinit these anyway, even if they've already been done (on
the real ones). */
load_gdt(cpu_gdt_descr);
set_kernel_gs();
+}
+
+/* Common CPU init for both boot and secondary CPUs */
+static void __cpuinit _cpu_init(int cpu, struct task_struct *curr)
+{
+ struct tss_struct * t = &per_cpu(init_tss, cpu);
+ struct thread_struct *thread = &curr->thread;
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
local_irq_enable();
}
+ cpu_set_gdt(cpu);
_cpu_init(cpu, curr);
}
cpumask_t online_policy_cpus;
struct drv_cmd cmd;
unsigned int msr;
- unsigned int next_state = 0;
- unsigned int next_perf_state = 0;
+ unsigned int next_state = 0; /* Index into freq_table */
+ unsigned int next_perf_state = 0; /* Index into perf table */
unsigned int i;
int result = 0;
msr =
(u32) perf->states[next_perf_state].
control & INTEL_MSR_RANGE;
+ cmd.val = get_cur_val(online_policy_cpus);
cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr;
break;
case SYSTEM_IO_CAPABLE:
else
cpu_set(policy->cpu, cmd.mask);
- freqs.old = data->freq_table[perf->state].frequency;
- freqs.new = data->freq_table[next_perf_state].frequency;
+ freqs.old = perf->states[perf->state].core_frequency * 1000;
+ freqs.new = data->freq_table[next_state].frequency;
for_each_cpu_mask(i, cmd.mask) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
valid_states++;
}
data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+ perf->state = 0;
result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
if (result)
#define CPU_EZRA_T 4
#define CPU_NEHEMIAH 5
+/* Flags */
+#define USE_ACPI_C3 (1 << 1)
+#define USE_NORTHBRIDGE (1 << 2)
+
static int cpu_model;
static unsigned int numscales=16;
static unsigned int fsb;
static int can_scale_voltage;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
-static int port22_en;
+static u8 longhaul_flags;
/* Module parameters */
static int scale_voltage;
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
-static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
safe_halt();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
- if (port22_en) {
+ if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C1 */
halt();
/* Dummy op - must do something useless after P_LVL3 read */
t = inl(acpi_fadt.xpm_tmr_blk.address);
}
-
/* Disable bus ratio bit */
local_irq_disable();
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
- if (pr->flags.bm_control) {
+ if (longhaul_flags & USE_NORTHBRIDGE) {
+ /* Disable AGP and PCI arbiters */
+ outb(3, 0x22);
+ } else if ((pr != NULL) && pr->flags.bm_control) {
/* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
- } else if (port22_en) {
- /* Disable AGP and PCI arbiters */
- outb(3, 0x22);
}
-
switch (longhaul_version) {
/*
* to work in practice.
*/
case TYPE_POWERSAVER:
- /* Don't allow wakeup */
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
- ACPI_MTX_DO_NOT_LOCK);
- do_powersaver(cx->address, clock_ratio_index);
+ if (longhaul_flags & USE_ACPI_C3) {
+ /* Don't allow wakeup */
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
+ ACPI_MTX_DO_NOT_LOCK);
+ do_powersaver(cx->address, clock_ratio_index);
+ } else {
+ do_powersaver(0, clock_ratio_index);
+ }
break;
}
- if (pr->flags.bm_control) {
+ if (longhaul_flags & USE_NORTHBRIDGE) {
+ /* Enable arbiters */
+ outb(0, 0x22);
+ } else if ((pr != NULL) && pr->flags.bm_control) {
/* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
ACPI_MTX_DO_NOT_LOCK);
- } else if (port22_en) {
- /* Enable arbiters */
- outb(0, 0x22);
}
-
outb(pic2_mask,0xA1); /* restore mask */
outb(pic1_mask,0x21);
#define ROUNDING 0xf
-static int _guess(int guess)
+static int _guess(int guess, int mult)
{
int target;
- target = ((maxmult/10)*guess);
- if (maxmult%10 != 0)
+ target = ((mult/10)*guess);
+ if (mult%10 != 0)
target += (guess/2);
target += ROUNDING/2;
target &= ~ROUNDING;
}
-static int guess_fsb(void)
+static int guess_fsb(int mult)
{
int speed = (cpu_khz/1000);
int i;
- int speeds[3] = { 66, 100, 133 };
+ int speeds[] = { 66, 100, 133, 200 };
speed += ROUNDING/2;
speed &= ~ROUNDING;
- for (i=0; i<3; i++) {
- if (_guess(speeds[i]) == speed)
+ for (i=0; i<4; i++) {
+ if (_guess(speeds[i], mult) == speed)
return speeds[i];
}
return 0;
130, 150, 160, 140, -1, 155, -1, 145 };
unsigned int j, k = 0;
union msr_longhaul longhaul;
- unsigned long lo, hi;
- unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 };
- unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 };
+ int mult = 0;
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
/* Ugh, Longhaul v1 didn't have the min/max MSRs.
Assume min=3.0x & max = whatever we booted at. */
minmult = 30;
- maxmult = longhaul_get_cpu_mult();
- rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
- invalue = (lo & (1<<18|1<<19)) >>18;
- if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2)
- fsb = eblcr_fsb_table_v1[invalue];
- else
- fsb = guess_fsb();
+ maxmult = mult = longhaul_get_cpu_mult();
break;
case TYPE_POWERSAVER:
/* Ezra-T */
if (cpu_model==CPU_EZRA_T) {
+ minmult = 30;
rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
invalue = longhaul.bits.MaxMHzBR;
if (longhaul.bits.MaxMHzBR4)
invalue += 16;
- maxmult=ezra_t_multipliers[invalue];
-
- invalue = longhaul.bits.MinMHzBR;
- if (longhaul.bits.MinMHzBR4 == 1)
- minmult = 30;
- else
- minmult = ezra_t_multipliers[invalue];
- fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+ maxmult = mult = ezra_t_multipliers[invalue];
break;
}
* But it works, so we don't grumble.
*/
minmult=40;
- maxmult=longhaul_get_cpu_mult();
-
- /* Starting with the 1.2GHz parts, theres a 200MHz bus. */
- if ((cpu_khz/maxmult) > 13400)
- fsb = 200;
- else
- fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+ maxmult = mult = longhaul_get_cpu_mult();
break;
}
}
+ fsb = guess_fsb(mult);
dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
- if (fsb == -1) {
+ if (fsb == 0) {
printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
&longhaul_walk_callback, NULL, (void *)&pr);
- if (pr == NULL)
- goto err_acpi;
- if (longhaul_version == TYPE_POWERSAVER) {
- /* Check ACPI support for C3 state */
+ /* Check ACPI support for C3 state */
+ if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) {
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address > 0 &&
(cx->latency <= 1000 || ignore_latency != 0) ) {
+ longhaul_flags |= USE_ACPI_C3;
goto print_support_type;
}
}
+ /* Check if northbridge is friendly */
+ if (enable_arbiter_disable()) {
+ longhaul_flags |= USE_NORTHBRIDGE;
+ goto print_support_type;
+ }
+
+ /* No ACPI C3 or we can't use it */
/* Check ACPI support for bus master arbiter disable */
- if (!pr->flags.bm_control) {
- if (enable_arbiter_disable()) {
- port22_en = 1;
- } else {
- goto err_acpi;
- }
+ if ((pr == NULL) || !(pr->flags.bm_control)) {
+ printk(KERN_ERR PFX
+ "No ACPI support. Unsupported northbridge.\n");
+ return -ENODEV;
}
+
print_support_type:
- if (!port22_en) {
+ if (!(longhaul_flags & USE_NORTHBRIDGE)) {
printk (KERN_INFO PFX "Using ACPI support.\n");
} else {
printk (KERN_INFO PFX "Using northbridge support.\n");
cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
return 0;
-
-err_acpi:
- printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n");
- return -ENODEV;
}
static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
- return -ENODEV;
printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+ return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI"
- "config is deprecated.\n "
- "Use X86_ACPI_CPUFREQ (acpi-cpufreq instead.\n" );
+ printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI "
+ "config is deprecated.\n "
+ "Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.\n" );
return 0;
ccr4 = getCx86(CX86_CCR4);
ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR3, ccr3);
+ setCx86(CX86_CCR4, ccr4);
set_cx86_memwb();
set_cx86_reorder();
}
}
-void __init register_memory(void)
+void __init e820_register_memory(void)
{
unsigned long gapstart, gapsize, round;
unsigned long long last;
pushl $(__USER_CS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET cs, 0*/
+#ifndef CONFIG_COMPAT_VDSO
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+#else
+ pushl $SYSENTER_RETURN
+#endif
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eip, 0
static int __assign_irq_vector(int irq)
{
- static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
- int vector;
+ static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+ int vector, offset, i;
BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
if (irq_vector[irq] > 0)
return irq_vector[irq];
- current_vector += 8;
- if (current_vector == SYSCALL_VECTOR)
- current_vector += 8;
-
- if (current_vector >= FIRST_SYSTEM_VECTOR) {
- offset++;
- if (!(offset % 8))
- return -ENOSPC;
- current_vector = FIRST_DEVICE_VECTOR + offset;
- }
-
vector = current_vector;
+ offset = current_offset;
+next:
+ vector += 8;
+ if (vector >= FIRST_SYSTEM_VECTOR) {
+ offset = (offset + 1) % 8;
+ vector = FIRST_DEVICE_VECTOR + offset;
+ }
+ if (vector == current_vector)
+ return -ENOSPC;
+ if (vector == SYSCALL_VECTOR)
+ goto next;
+ for (i = 0; i < NR_IRQ_VECTORS; i++)
+ if (irq_vector[i] == vector)
+ goto next;
+
+ current_vector = vector;
+ current_offset = offset;
irq_vector[irq] = vector;
return vector;
return NOTIFY_OK;
}
-static struct notifier_block mc_cpu_notifier = {
+static struct notifier_block __cpuinitdata mc_cpu_notifier = {
.notifier_call = mc_cpu_callback,
};
/* Have we found an MP table */
int smp_found_config;
-unsigned int __initdata maxcpus = NR_CPUS;
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
/*
* Various Linux-internal data structures created from the
*/
static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
-static void __devinit MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
physid_mask_t phys_cpu;
Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
}
-void __devinit mp_register_lapic (u8 id, u8 enabled)
+void __cpuinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
int boot_cpu = 0;
if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
return 0;
- /*
- * If any other x86 CPU has a local APIC, then
- * please test the NMI stuff there and send me the
- * missing bits. Right now Intel P6/P4 and AMD K7 only.
- */
- if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
- return 0; /* no lapic support */
+
nmi_watchdog = nmi;
return 1;
}
.irq_enable_sysexit = native_irq_enable_sysexit,
.iret = native_iret,
};
-EXPORT_SYMBOL(paravirt_ops);
+
+/*
+ * NOTE: CONFIG_PARAVIRT is experimental and the paravirt_ops
+ * semantics are subject to change. Hence we only do this
+ * internal-only export of this, until it gets sorted out and
+ * all lowlevel CPU ops used by modules are separately exported.
+ */
+EXPORT_SYMBOL_GPL(paravirt_ops);
{
if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+
local_irq_disable();
if (!need_resched())
safe_halt(); /* enables interrupts racelessly */
/*
* Offset of eflags on child stack..
*/
-#define EFL_OFFSET ((EFL-2)*4-sizeof(struct pt_regs))
+#define EFL_OFFSET offsetof(struct pt_regs, eflags)
static inline struct pt_regs *get_child_regs(struct task_struct *task)
{
}
/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
+ * This routine will get a word off of the processes privileged stack.
+ * the offset is bytes into the pt_regs structure on the stack.
+ * This routine assumes that all the privileged stacks are in our
* data space.
*/
static inline int get_stack_long(struct task_struct *task, int offset)
{
unsigned char *stack;
- stack = (unsigned char *)task->thread.esp0;
+ stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs);
stack += offset;
return (*((int *)stack));
}
/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
+ * This routine will put a word on the processes privileged stack.
+ * the offset is bytes into the pt_regs structure on the stack.
+ * This routine assumes that all the privileged stacks are in our
* data space.
*/
static inline int put_stack_long(struct task_struct *task, int offset,
{
unsigned char * stack;
- stack = (unsigned char *) task->thread.esp0;
+ stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs);
stack += offset;
*(unsigned long *) stack = data;
return 0;
}
if (regno > ES*4)
regno -= 1*4;
- put_stack_long(child, regno - sizeof(struct pt_regs), value);
+ put_stack_long(child, regno, value);
return 0;
}
default:
if (regno > ES*4)
regno -= 1*4;
- regno = regno - sizeof(struct pt_regs);
retval &= get_stack_long(child, regno);
}
return retval;
extern struct resource data_resource;
/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
/* common cpu data for all cpus */
struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
EXPORT_SYMBOL(boot_cpu_data);
#endif
/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __attribute__((weak)) memory_setup(void)
+char * __init __attribute__((weak)) memory_setup(void)
{
return machine_specific_memory_setup();
}
get_smp_config();
#endif
- register_memory();
+ e820_register_memory();
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
* a given CPU
*/
-static void __devinit smp_store_cpu_info(int id)
+static void __cpuinit smp_store_cpu_info(int id)
{
struct cpuinfo_x86 *c = cpu_data + id;
atomic_t count_start;
atomic_t count_stop;
unsigned long long values[NR_CPUS];
-} tsc __initdata = {
+} tsc __cpuinitdata = {
.start_flag = ATOMIC_INIT(0),
.count_start = ATOMIC_INIT(0),
.count_stop = ATOMIC_INIT(0),
printk("passed.\n");
}
-static void __init synchronize_tsc_ap(void)
+static void __cpuinit synchronize_tsc_ap(void)
{
int i;
static atomic_t init_deasserted;
-static void __devinit smp_callin(void)
+static void __cpuinit smp_callin(void)
{
int cpuid, phys_id;
unsigned long timeout;
/*
* Activate a secondary processor.
*/
-static void __devinit start_secondary(void *unused)
+static void __cpuinit start_secondary(void *unused)
{
/*
* Don't put *anything* before secondary_cpu_init(), SMP
*/
void __devinit initialize_secondary(void)
{
+ /*
+ * switch to the per CPU GDT we already set up
+ * in do_boot_cpu()
+ */
+ cpu_set_gdt(current_thread_info()->cpu);
+
/*
* We don't actually need to load the full TSS,
* basically just the stack pointer and the eip.
#define alloc_idle_task(cpu) fork_idle(cpu)
#endif
-static int __devinit do_boot_cpu(int apicid, int cpu)
+static int __cpuinit do_boot_cpu(int apicid, int cpu)
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
/* Stack for startup_32 can be just as for start_secondary onwards */
stack_start.esp = (void *) idle->thread.esp;
- start_pda = cpu_pda(cpu);
- cpu_gdt_descr = per_cpu(cpu_gdt_descr, cpu);
-
irq_ctx_init(cpu);
x86_cpu_to_apicid[cpu] = apicid;
}
#endif /* CONFIG_HOTPLUG_CPU */
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
#ifdef CONFIG_HOTPLUG_CPU
int ret=0;
#ifdef CONFIG_COMPAT_VDSO
__set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY);
printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO));
-#else
- /*
- * In the non-compat case the ELF coredumping code needs the fixmap:
- */
- __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_KERNEL_RO);
#endif
if (!boot_cpu_has(X86_FEATURE_SEP)) {
return 0;
}
+#ifndef CONFIG_COMPAT_VDSO
static struct page *syscall_nopage(struct vm_area_struct *vma,
unsigned long adr, int *type)
{
vma->vm_end = addr + PAGE_SIZE;
/* MAYWRITE to allow gdb to COW and set breakpoints */
vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
+ /*
+ * Make sure the vDSO gets into every core dump.
+ * Dumping its contents makes post-mortem fully interpretable later
+ * without matching up the same kernel and hardware config to see
+ * what PC values meant.
+ */
+ vma->vm_flags |= VM_ALWAYSDUMP;
vma->vm_flags |= mm->def_flags;
vma->vm_page_prot = protection_map[vma->vm_flags & 7];
vma->vm_ops = &syscall_vm_ops;
{
return 0;
}
+#endif
.data
+/* We can free up trampoline after bootup if cpu hotplug is not supported. */
+#ifndef CONFIG_HOTPLUG_CPU
+.section ".init.data","aw",@progbits
+#endif
+
.code16
ENTRY(trampoline_data)
*/
unsigned int tsc_khz;
-int tsc_disable __cpuinitdata = 0;
+int tsc_disable;
#ifdef CONFIG_X86_TSC
static int __init tsc_setup(char *str)
};
-static __init int probe_bigsmp(void)
+static int probe_bigsmp(void)
{
if (def_to_bigsmp)
dmi_bigsmp = 1;
#include <asm/mach-default/mach_mpparse.h>
/* should be called last. */
-static __init int probe_default(void)
+static int probe_default(void)
{
return 1;
}
#include <asm/mach-es7000/mach_mpparse.h>
#include <asm/mach-es7000/mach_wakecpu.h>
-static __init int probe_es7000(void)
+static int probe_es7000(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
#include <asm/mach-summit/mach_ipi.h>
#include <asm/mach-summit/mach_mpparse.h>
-static __init int probe_summit(void)
+static int probe_summit(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
set_current(hard_get_current());
#endif
+ /*
+ * switch to the per CPU GDT we already set up
+ * in do_boot_cpu()
+ */
+ cpu_set_gdt(current_thread_info()->cpu);
+
/*
* We don't actually need to load the full TSS,
* basically just the stack pointer and the eip.
totalram_pages += totalhigh_pages;
#endif
}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int paddr_to_nid(u64 addr)
+{
+ int nid;
+ unsigned long pfn = PFN_DOWN(addr);
+
+ for_each_node(nid)
+ if (node_start_pfn[nid] <= pfn &&
+ pfn < node_end_pfn[nid])
+ return nid;
+
+ return -1;
+}
+
+/*
+ * This function is used to ask node id BEFORE memmap and mem_section's
+ * initialization (pfn_to_nid() can't be used yet).
+ * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
+ */
+int memory_add_physaddr_to_nid(u64 addr)
+{
+ int nid = paddr_to_nid(addr);
+ return (nid >= 0) ? nid : 0;
+}
+
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
SetPageReserved(page);
}
-static int add_one_highpage_hotplug(struct page *page, unsigned long pfn)
+static int __meminit add_one_highpage_hotplug(struct page *page, unsigned long pfn)
{
free_new_highpage(page);
totalram_pages++;
* has been added dynamically that would be
* onlined here is in HIGHMEM
*/
-void online_page(struct page *page)
+void __meminit online_page(struct page *page)
{
ClearPageReserved(page);
add_one_highpage_hotplug(page, page_to_pfn(page));
#endif
}
-/*
- * this is for the non-NUMA, single node SMP system case.
- * Specifically, in the case of x86, we will always add
- * memory to the highmem for now.
- */
#ifdef CONFIG_MEMORY_HOTPLUG
-#ifndef CONFIG_NEED_MULTIPLE_NODES
int arch_add_memory(int nid, u64 start, u64 size)
{
- struct pglist_data *pgdata = &contig_page_data;
+ struct pglist_data *pgdata = NODE_DATA(nid);
struct zone *zone = pgdata->node_zones + ZONE_HIGHMEM;
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
{
return -EINVAL;
}
-#endif
+EXPORT_SYMBOL_GPL(remove_memory);
#endif
struct kmem_cache *pgd_cache;
#define VIA_8363_KL133_REVISION_ID 0x81
#define VIA_8363_KM133_REVISION_ID 0x84
-static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d)
+static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
{
u8 v;
u8 revision;
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
/*
* For some reasons Intel decided that certain parts of their
* issue another HALT within 80 ns of the initial HALT, the failure condition
* is avoided.
*/
-static void __init pci_fixup_nforce2(struct pci_dev *dev)
+static void pci_fixup_nforce2(struct pci_dev *dev)
{
u32 val;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
/* Max PCI Express root ports */
#define MAX_PCIEROOT 6
* Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
* configuration space.
*/
-static void __devinit pci_early_fixup_cyrix_5530(struct pci_dev *dev)
+static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
{
u8 r;
/* clear 'F4 Video Configuration Trap' bit */
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
pci_early_fixup_cyrix_5530);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+ pci_early_fixup_cyrix_5530);
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
+static int mmcfg_last_accessed_cpu;
static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32);
static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
{
u32 dev_base = base | (bus << 20) | (devfn << 12);
- if (dev_base != mmcfg_last_accessed_device) {
+ int cpu = smp_processor_id();
+ if (dev_base != mmcfg_last_accessed_device ||
+ cpu != mmcfg_last_accessed_cpu) {
mmcfg_last_accessed_device = dev_base;
+ mmcfg_last_accessed_cpu = cpu;
set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
}
}
*/
int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
+ return gsi;
+
if (has_8259 && gsi < 16)
return isa_irq_to_vector(gsi);
dprintk("acpi_cpufreq_cpu_init\n");
- data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+ data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
if (!data)
return (-ENOMEM);
- memset(data, 0, sizeof(struct cpufreq_acpi_io));
-
acpi_io_data[cpu] = data;
result = acpi_processor_register_performance(&data->acpi_data, cpu);
/* endless idle loop with no priority at all */
while (1) {
- if (can_do_pal_halt)
+ if (can_do_pal_halt) {
current_thread_info()->status &= ~TS_POLLING;
- else
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+ } else {
current_thread_info()->status |= TS_POLLING;
+ }
if (!need_resched()) {
void (*idle)(void);
if (map_start < map_end)
memmap_init_zone((unsigned long)(map_end - map_start),
- args->nid, args->zone, page_to_pfn(map_start));
+ args->nid, args->zone, page_to_pfn(map_start),
+ MEMMAP_EARLY);
return 0;
}
unsigned long start_pfn)
{
if (!vmem_map)
- memmap_init_zone(size, nid, zone, start_pfn);
+ memmap_init_zone(size, nid, zone, start_pfn, MEMMAP_EARLY);
else {
struct page *start;
struct memmap_init_callback_data args;
u64 result;
s64 status;
+ /* SN Altix does not follow the IOSAPIC IRQ routing model */
+ acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
+
acpi_bus_register_driver(&acpi_sn_hubdev_driver);
status = sal_ioif_init(&result);
if (status || result)
}
}
-int __devinit __cpu_up(unsigned int cpu_id)
+int __cpuinit __cpu_up(unsigned int cpu_id)
{
int timeout;
depends on MIPS_MT
default y
+config MIPS_MT_SMTC_INSTANT_REPLAY
+ bool "Low-latency Dispatch of Deferred SMTC IPIs"
+ depends on MIPS_MT_SMTC
+ default y
+ help
+ SMTC pseudo-interrupts between TCs are deferred and queued
+ if the target TC is interrupt-inhibited (IXMT). In the first
+ SMTC prototypes, these queued IPIs were serviced on return
+ to user mode, or on entry into the kernel idle loop. The
+ INSTANT_REPLAY option dispatches them as part of local_irq_restore()
+ processing, which adds runtime overhead (hence the option to turn
+ it off), but ensures that IPIs are handled promptly even under
+ heavy I/O interrupt load.
+
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
depends on MIPS_VPE_LOADER
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \
- egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \
+ egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
/* TBD */
static struct resource pci_io_resource = {
- .start = PCI_IO_START,
- .end = PCI_IO_END,
+ .start = (resource_size_t)PCI_IO_START,
+ .end = (resource_size_t)PCI_IO_END,
.name = "PCI IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
- .start = PCI_MEM_START,
- .end = PCI_MEM_END,
+ .start = (resource_size_t)PCI_MEM_START,
+ .end = (resource_size_t)PCI_MEM_END,
.name = "PCI memory space",
.flags = IORESOURCE_MEM
};
addr += PAGE_SIZE;
}
- printk("Freeing unused PROM memory: %ldk freed\n",
+ printk("Freeing unused PROM memory: %ldkb freed\n",
(end - PAGE_SIZE) >> 10);
return end - PAGE_SIZE;
}
#ifdef CONFIG_MIPS32_N32
-asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, union semun arg)
+asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
{
/* compat_sys_semctl expects a pointer to union semun */
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
- if (put_user(ptr_to_compat(arg.__pad), uptr))
+ if (put_user(arg, uptr))
return -EFAULT;
return compat_sys_semctl(semid, semnum, cmd, uptr);
}
+
+asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+{
+ return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
+}
+
+asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
+ int msgflg)
+{
+ return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
+ compat_ptr(msgp));
+}
#endif
struct sysctl_args32
EXPORT_SYMBOL(__strnlen_user_asm);
EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_partial_copy_user);
EXPORT_SYMBOL(invalid_pte_table);
PTR sysn32_semctl
PTR sys_shmdt /* 6065 */
PTR sys_msgget
- PTR compat_sys_msgsnd
- PTR compat_sys_msgrcv
+ PTR sysn32_msgsnd
+ PTR sysn32_msgrcv
PTR compat_sys_msgctl
PTR compat_sys_fcntl /* 6070 */
PTR sys_flock
* and keep control until "cpu_online(cpu)" is set. Note: cpu is
* physical, not logical.
*/
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/cpu.h>
#include <asm/processor.h>
}
}
write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
+ ehb();
/*
* Setup kernel data structures to use software total,
* of their initialization in smtc_cpu_setup().
*/
- tlbsiz = tlbsiz & 0x3f; /* MIPS32 limits TLB indices to 64 */
- cpu_data[0].tlbsize = tlbsiz;
+ /* MIPS32 limits TLB indices to 64 */
+ if (tlbsiz > 64)
+ tlbsiz = 64;
+ cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz;
smtc_status |= SMTC_TLB_SHARED;
+ local_flush_tlb_all();
printk("TLB of %d entry pairs shared by %d VPEs\n",
tlbsiz, vpes);
* SMTC-specific hacks invoked from elsewhere in the kernel.
*/
+void smtc_ipi_replay(void)
+{
+ /*
+ * To the extent that we've ever turned interrupts off,
+ * we may have accumulated deferred IPIs. This is subtle.
+ * If we use the smtc_ipi_qdepth() macro, we'll get an
+ * exact number - but we'll also disable interrupts
+ * and create a window of failure where a new IPI gets
+ * queued after we test the depth but before we re-enable
+ * interrupts. So long as IXMT never gets set, however,
+ * we should be OK: If we pick up something and dispatch
+ * it here, that's great. If we see nothing, but concurrent
+ * with this operation, another TC sends us an IPI, IXMT
+ * is clear, and we'll handle it as a real pseudo-interrupt
+ * and not a pseudo-pseudo interrupt.
+ */
+ if (IPIQ[smp_processor_id()].depth > 0) {
+ struct smtc_ipi *pipi;
+ extern void self_ipi(struct smtc_ipi *);
+
+ while ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()]))) {
+ self_ipi(pipi);
+ smtc_cpu_stats[smp_processor_id()].selfipis++;
+ }
+ }
+}
+
+EXPORT_SYMBOL(smtc_ipi_replay);
+
void smtc_idle_loop_hook(void)
{
#ifdef SMTC_IDLE_HOOK_DEBUG
if (pdb_msg != &id_ho_db_msg[0])
printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
#endif /* SMTC_IDLE_HOOK_DEBUG */
+
/*
- * To the extent that we've ever turned interrupts off,
- * we may have accumulated deferred IPIs. This is subtle.
- * If we use the smtc_ipi_qdepth() macro, we'll get an
- * exact number - but we'll also disable interrupts
- * and create a window of failure where a new IPI gets
- * queued after we test the depth but before we re-enable
- * interrupts. So long as IXMT never gets set, however,
- * we should be OK: If we pick up something and dispatch
- * it here, that's great. If we see nothing, but concurrent
- * with this operation, another TC sends us an IPI, IXMT
- * is clear, and we'll handle it as a real pseudo-interrupt
- * and not a pseudo-pseudo interrupt.
+ * Replay any accumulated deferred IPIs. If "Instant Replay"
+ * is in use, there should never be any.
*/
- if (IPIQ[smp_processor_id()].depth > 0) {
- struct smtc_ipi *pipi;
- extern void self_ipi(struct smtc_ipi *);
-
- if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) {
- self_ipi(pipi);
- smtc_cpu_stats[smp_processor_id()].selfipis++;
- }
- }
+#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+ smtc_ipi_replay();
+#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
}
void smtc_soft_dump(void)
{
unsigned int count;
-#ifndef CONFIG_SOC_PNX8550 /* pnx8550 resets to zero */
/* Ack this timer interrupt and set the next one. */
expirelo += cycles_per_jiffy;
-#endif
write_c0_compare(expirelo);
/* Check to see if we have missed any timer interrupts. */
struct list_head list;
};
-struct vpecontrol_ {
+struct {
/* Virtual processing elements */
struct list_head vpe_list;
/* Thread contexts */
struct list_head tc_list;
-} vpecontrol;
+} vpecontrol = {
+ .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
+ .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+};
static void release_progmem(void *ptr);
/* static __attribute_used__ void dump_vpe(struct vpe * v); */
/* dump_mtregs(); */
- INIT_LIST_HEAD(&vpecontrol.vpe_list);
- INIT_LIST_HEAD(&vpecontrol.tc_list);
val = read_c0_mvpconf0();
for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o csum_partial_copy.o memcpy.o promlib.o \
+lib-y += csum_partial.o memcpy.o promlib.o \
strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
* Copyright (C) 1998, 1999 Ralf Baechle
* Copyright (C) 1999 Silicon Graphics, Inc.
*/
+#include <linux/errno.h>
#include <asm/asm.h>
+#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#ifdef CONFIG_64BIT
jr ra
.set noreorder
END(csum_partial)
+
+
+/*
+ * checksum and copy routines based on memcpy.S
+ *
+ * csum_partial_copy_nocheck(src, dst, len, sum)
+ * __csum_partial_copy_user(src, dst, len, sum, errp)
+ *
+ * See "Spec" in memcpy.S for details. Unlike __copy_user, all
+ * function in this file use the standard calling convention.
+ */
+
+#define src a0
+#define dst a1
+#define len a2
+#define psum a3
+#define sum v0
+#define odd t8
+#define errptr t9
+
+/*
+ * The exception handler for loads requires that:
+ * 1- AT contain the address of the byte just past the end of the source
+ * of the copy,
+ * 2- src_entry <= src < AT, and
+ * 3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by __csum_partial_copy_from_user and maintained by
+ * not writing AT in __csum_partial_copy
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores stores -EFAULT to errptr and return.
+ * These handlers do not need to overwrite any data.
+ */
+
+#define EXC(inst_reg,addr,handler) \
+9: inst_reg, addr; \
+ .section __ex_table,"a"; \
+ PTR 9b, handler; \
+ .previous
+
+#ifdef USE_DOUBLE
+
+#define LOAD ld
+#define LOADL ldl
+#define LOADR ldr
+#define STOREL sdl
+#define STORER sdr
+#define STORE sd
+#define ADD daddu
+#define SUB dsubu
+#define SRL dsrl
+#define SLL dsll
+#define SLLV dsllv
+#define SRLV dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+#else
+
+#define LOAD lw
+#define LOADL lwl
+#define LOADR lwr
+#define STOREL swl
+#define STORER swr
+#define STORE sw
+#define ADD addu
+#define SUB subu
+#define SRL srl
+#define SLL sll
+#define SLLV sllv
+#define SRLV srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST LOADL
+#define STFIRST STORER
+#define STREST STOREL
+#define SHIFT_DISCARD SLLV
+#define SHIFT_DISCARD_REVERT SRLV
+#else
+#define LDFIRST LOADL
+#define LDREST LOADR
+#define STFIRST STOREL
+#define STREST STORER
+#define SHIFT_DISCARD SRLV
+#define SHIFT_DISCARD_REVERT SLLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit) (FIRST(unit)+NBYTES-1)
+
+#define ADDRMASK (NBYTES-1)
+
+ .set noat
+
+LEAF(__csum_partial_copy_user)
+ PTR_ADDU AT, src, len /* See (1) above. */
+#ifdef CONFIG_64BIT
+ move errptr, a4
+#else
+ lw errptr, 16(sp)
+#endif
+FEXPORT(csum_partial_copy_nocheck)
+ move sum, zero
+ move odd, zero
+ /*
+ * Note: dst & src may be unaligned, len may be 0
+ * Temps
+ */
+ /*
+ * The "issue break"s below are very approximate.
+ * Issue delays for dcache fills will perturb the schedule, as will
+ * load queue full replay traps, etc.
+ *
+ * If len < NBYTES use byte operations.
+ */
+ sltu t2, len, NBYTES
+ and t1, dst, ADDRMASK
+ bnez t2, copy_bytes_checklen
+ and t0, src, ADDRMASK
+ andi odd, dst, 0x1 /* odd buffer? */
+ bnez t1, dst_unaligned
+ nop
+ bnez t0, src_unaligned_dst_aligned
+ /*
+ * use delay slot for fall-through
+ * src and dst are aligned; need to compute rem
+ */
+both_aligned:
+ SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
+ beqz t0, cleanup_both_aligned # len < 8*NBYTES
+ nop
+ SUB len, 8*NBYTES # subtract here for bgez loop
+ .align 4
+1:
+EXC( LOAD t0, UNIT(0)(src), l_exc)
+EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
+EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
+EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
+EXC( LOAD t4, UNIT(4)(src), l_exc_copy)
+EXC( LOAD t5, UNIT(5)(src), l_exc_copy)
+EXC( LOAD t6, UNIT(6)(src), l_exc_copy)
+EXC( LOAD t7, UNIT(7)(src), l_exc_copy)
+ SUB len, len, 8*NBYTES
+ ADD src, src, 8*NBYTES
+EXC( STORE t0, UNIT(0)(dst), s_exc)
+ ADDC(sum, t0)
+EXC( STORE t1, UNIT(1)(dst), s_exc)
+ ADDC(sum, t1)
+EXC( STORE t2, UNIT(2)(dst), s_exc)
+ ADDC(sum, t2)
+EXC( STORE t3, UNIT(3)(dst), s_exc)
+ ADDC(sum, t3)
+EXC( STORE t4, UNIT(4)(dst), s_exc)
+ ADDC(sum, t4)
+EXC( STORE t5, UNIT(5)(dst), s_exc)
+ ADDC(sum, t5)
+EXC( STORE t6, UNIT(6)(dst), s_exc)
+ ADDC(sum, t6)
+EXC( STORE t7, UNIT(7)(dst), s_exc)
+ ADDC(sum, t7)
+ bgez len, 1b
+ ADD dst, dst, 8*NBYTES
+ ADD len, 8*NBYTES # revert len (see above)
+
+ /*
+ * len == the number of bytes left to copy < 8*NBYTES
+ */
+cleanup_both_aligned:
+#define rem t7
+ beqz len, done
+ sltu t0, len, 4*NBYTES
+ bnez t0, less_than_4units
+ and rem, len, (NBYTES-1) # rem = len % NBYTES
+ /*
+ * len >= 4*NBYTES
+ */
+EXC( LOAD t0, UNIT(0)(src), l_exc)
+EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
+EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
+EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
+ SUB len, len, 4*NBYTES
+ ADD src, src, 4*NBYTES
+EXC( STORE t0, UNIT(0)(dst), s_exc)
+ ADDC(sum, t0)
+EXC( STORE t1, UNIT(1)(dst), s_exc)
+ ADDC(sum, t1)
+EXC( STORE t2, UNIT(2)(dst), s_exc)
+ ADDC(sum, t2)
+EXC( STORE t3, UNIT(3)(dst), s_exc)
+ ADDC(sum, t3)
+ beqz len, done
+ ADD dst, dst, 4*NBYTES
+less_than_4units:
+ /*
+ * rem = len % NBYTES
+ */
+ beq rem, len, copy_bytes
+ nop
+1:
+EXC( LOAD t0, 0(src), l_exc)
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+EXC( STORE t0, 0(dst), s_exc)
+ ADDC(sum, t0)
+ bne rem, len, 1b
+ ADD dst, dst, NBYTES
+
+ /*
+ * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+ * A loop would do only a byte at a time with possible branch
+ * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
+ * because can't assume read-access to dst. Instead, use
+ * STREST dst, which doesn't require read access to dst.
+ *
+ * This code should perform better than a simple loop on modern,
+ * wide-issue mips processors because the code has fewer branches and
+ * more instruction-level parallelism.
+ */
+#define bits t2
+ beqz len, done
+ ADD t1, dst, len # t1 is just past last byte of dst
+ li bits, 8*NBYTES
+ SLL rem, len, 3 # rem = number of bits to keep
+EXC( LOAD t0, 0(src), l_exc)
+ SUB bits, bits, rem # bits = number of bits to discard
+ SHIFT_DISCARD t0, t0, bits
+EXC( STREST t0, -1(t1), s_exc)
+ SHIFT_DISCARD_REVERT t0, t0, bits
+ .set reorder
+ ADDC(sum, t0)
+ b done
+ .set noreorder
+dst_unaligned:
+ /*
+ * dst is unaligned
+ * t0 = src & ADDRMASK
+ * t1 = dst & ADDRMASK; T1 > 0
+ * len >= NBYTES
+ *
+ * Copy enough bytes to align dst
+ * Set match = (src and dst have same alignment)
+ */
+#define match rem
+EXC( LDFIRST t3, FIRST(0)(src), l_exc)
+ ADD t2, zero, NBYTES
+EXC( LDREST t3, REST(0)(src), l_exc_copy)
+ SUB t2, t2, t1 # t2 = number of bytes copied
+ xor match, t0, t1
+EXC( STFIRST t3, FIRST(0)(dst), s_exc)
+ SLL t4, t1, 3 # t4 = number of bits to discard
+ SHIFT_DISCARD t3, t3, t4
+ /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */
+ ADDC(sum, t3)
+ beq len, t2, done
+ SUB len, len, t2
+ ADD dst, dst, t2
+ beqz match, both_aligned
+ ADD src, src, t2
+
+src_unaligned_dst_aligned:
+ SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
+ beqz t0, cleanup_src_unaligned
+ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+EXC( LDFIRST t0, FIRST(0)(src), l_exc)
+EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy)
+ SUB len, len, 4*NBYTES
+EXC( LDREST t0, REST(0)(src), l_exc_copy)
+EXC( LDREST t1, REST(1)(src), l_exc_copy)
+EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy)
+EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy)
+EXC( LDREST t2, REST(2)(src), l_exc_copy)
+EXC( LDREST t3, REST(3)(src), l_exc_copy)
+ ADD src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+ nop # improves slotting
+#endif
+EXC( STORE t0, UNIT(0)(dst), s_exc)
+ ADDC(sum, t0)
+EXC( STORE t1, UNIT(1)(dst), s_exc)
+ ADDC(sum, t1)
+EXC( STORE t2, UNIT(2)(dst), s_exc)
+ ADDC(sum, t2)
+EXC( STORE t3, UNIT(3)(dst), s_exc)
+ ADDC(sum, t3)
+ bne len, rem, 1b
+ ADD dst, dst, 4*NBYTES
+
+cleanup_src_unaligned:
+ beqz len, done
+ and rem, len, NBYTES-1 # rem = len % NBYTES
+ beq rem, len, copy_bytes
+ nop
+1:
+EXC( LDFIRST t0, FIRST(0)(src), l_exc)
+EXC( LDREST t0, REST(0)(src), l_exc_copy)
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+EXC( STORE t0, 0(dst), s_exc)
+ ADDC(sum, t0)
+ bne len, rem, 1b
+ ADD dst, dst, NBYTES
+
+copy_bytes_checklen:
+ beqz len, done
+ nop
+copy_bytes:
+ /* 0 < len < NBYTES */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define SHIFT_START 0
+#define SHIFT_INC 8
+#else
+#define SHIFT_START 8*(NBYTES-1)
+#define SHIFT_INC -8
+#endif
+ move t2, zero # partial word
+ li t3, SHIFT_START # shift
+/* use l_exc_copy here to return correct sum on fault */
+#define COPY_BYTE(N) \
+EXC( lbu t0, N(src), l_exc_copy); \
+ SUB len, len, 1; \
+EXC( sb t0, N(dst), s_exc); \
+ SLLV t0, t0, t3; \
+ addu t3, SHIFT_INC; \
+ beqz len, copy_bytes_done; \
+ or t2, t0
+
+ COPY_BYTE(0)
+ COPY_BYTE(1)
+#ifdef USE_DOUBLE
+ COPY_BYTE(2)
+ COPY_BYTE(3)
+ COPY_BYTE(4)
+ COPY_BYTE(5)
+#endif
+EXC( lbu t0, NBYTES-2(src), l_exc_copy)
+ SUB len, len, 1
+EXC( sb t0, NBYTES-2(dst), s_exc)
+ SLLV t0, t0, t3
+ or t2, t0
+copy_bytes_done:
+ ADDC(sum, t2)
+done:
+ /* fold checksum */
+#ifdef USE_DOUBLE
+ dsll32 v1, sum, 0
+ daddu sum, v1
+ sltu v1, sum, v1
+ dsra32 sum, sum, 0
+ addu sum, v1
+#endif
+ sll v1, sum, 16
+ addu sum, v1
+ sltu v1, sum, v1
+ srl sum, sum, 16
+ addu sum, v1
+
+ /* odd buffer alignment? */
+ beqz odd, 1f
+ nop
+ sll v1, sum, 8
+ srl sum, sum, 8
+ or sum, v1
+ andi sum, 0xffff
+1:
+ .set reorder
+ ADDC(sum, psum)
+ jr ra
+ .set noreorder
+
+l_exc_copy:
+ /*
+ * Copy bytes from src until faulting load address (or until a
+ * lb faults)
+ *
+ * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+ * may be more than a byte beyond the last address.
+ * Hence, the lb below may get an exception.
+ *
+ * Assumes src < THREAD_BUADDR($28)
+ */
+ LOAD t0, TI_TASK($28)
+ li t2, SHIFT_START
+ LOAD t0, THREAD_BUADDR(t0)
+1:
+EXC( lbu t1, 0(src), l_exc)
+ ADD src, src, 1
+ sb t1, 0(dst) # can't fault -- we're copy_from_user
+ SLLV t1, t1, t2
+ addu t2, SHIFT_INC
+ ADDC(sum, t1)
+ bne src, t0, 1b
+ ADD dst, dst, 1
+l_exc:
+ LOAD t0, TI_TASK($28)
+ nop
+ LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
+ nop
+ SUB len, AT, t0 # len number of uncopied bytes
+ /*
+ * Here's where we rely on src and dst being incremented in tandem,
+ * See (3) above.
+ * dst += (fault addr - src) to put dst at first byte to clear
+ */
+ ADD dst, t0 # compute start address in a1
+ SUB dst, src
+ /*
+ * Clear len bytes starting at dst. Can't call __bzero because it
+ * might modify len. An inefficient loop for these rare times...
+ */
+ beqz len, done
+ SUB src, len, 1
+1: sb zero, 0(dst)
+ ADD dst, dst, 1
+ bnez src, 1b
+ SUB src, src, 1
+ li v1, -EFAULT
+ b done
+ sw v1, (errptr)
+
+s_exc:
+ li v0, -1 /* invalid checksum */
+ li v1, -EFAULT
+ jr ra
+ sw v1, (errptr)
+ END(__csum_partial_copy_user)
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 1995 Waldorf Electronics GmbH
- * Copyright (C) 1998, 1999 Ralf Baechle
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-#include <net/checksum.h>
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src,
- void *dst, int len, __wsum sum)
-{
- /*
- * It's 2:30 am and I don't feel like doing it real ...
- * This is lots slower than the real thing (tm)
- */
- sum = csum_partial(src, len, sum);
- memcpy(dst, src, len);
-
- return sum;
-}
-
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/*
- * Copy from userspace and compute checksum. If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void __user *src,
- void *dst, int len, __wsum sum, int *err_ptr)
-{
- int missing;
-
- might_sleep();
- missing = copy_from_user(dst, src, len);
- if (missing) {
- memset(dst + len - missing, 0, missing);
- *err_ptr = -EFAULT;
- }
-
- return csum_partial(dst, len, sum);
-}
#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
unsigned long cpu_khz;
void __init plat_timer_setup(struct irqaction *irq)
{
+#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- }
- else {
+ } else
+#endif
+ {
if (cpu_has_vint)
set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
# under Linux.
#
-obj-y := malta_int.o malta_mtd.o malta_setup.o
+obj-y := malta_int.o malta_setup.o
+obj-$(CONFIG_MTD) += malta_mtd.o
obj-$(CONFIG_SMP) += malta_smp.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
+
+static struct mtd_partition malta_mtd_partitions[] = {
+ {
+ .name = "YAMON",
+ .offset = 0x0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "User FS",
+ .offset = 0x100000,
+ .size = 0x2e0000
+ }, {
+ .name = "Board Config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct physmap_flash_data malta_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
+ .parts = malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x1e3fffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &malta_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &malta_flash_resource,
+};
+
+static int __init malta_mtd_init(void)
+{
+ platform_device_register(&malta_flash);
+
+ return 0;
+}
+
+module_init(malta_mtd_init)
* Sead board.
*/
#include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq);
else
- spurious_interrupt(regs);
+ spurious_interrupt();
}
void __init arch_init_irq(void)
board_time_init = sim_time_init;
prom_printf("Linux started...\n");
-#ifdef CONFIG_MT_SMP
+#ifdef CONFIG_MIPS_MT_SMP
sanitize_tlb_entries();
#endif
}
freed = prom_free_prom_memory();
if (freed)
- printk(KERN_INFO "Freeing firmware memory: %ldk freed\n",freed);
+ printk(KERN_INFO "Freeing firmware memory: %ldkb freed\n",
+ freed >> 10);
free_init_pages("unused kernel memory",
__pa_symbol(&__init_begin),
static inline void build_store_reg(int reg)
{
- if (cpu_has_prefetch)
- if (reg)
- build_dst_pref(pref_offset_copy);
- else
- build_dst_pref(pref_offset_clear);
+ int pref_off = cpu_has_prefetch ?
+ (reg ? pref_offset_copy : pref_offset_clear) : 0;
+ if (pref_off)
+ build_dst_pref(pref_off);
else if (cpu_has_cache_cdex_s)
build_cdex_s();
else if (cpu_has_cache_cdex_p)
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
- local_irq_save(flags);
if (size <= current_cpu_data.tlbsize/2) {
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
extern unsigned long marvell_base;
extern unsigned long bus_clock;
-#ifdef CONFIG_GALILLEO_GT64240_ETH
+#ifdef CONFIG_GALILEO_GT64240_ETH
extern unsigned char prom_mac_addr_base[6];
#endif
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_G;
-#ifdef CONFIG_GALILLEO_GT64240_ETH
+#ifdef CONFIG_GALILEO_GT64240_ETH
/* get the base MAC address for on-board ethernet ports */
memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
#endif
#include "ocelot_pld.h"
-#ifdef CONFIG_GALILLEO_GT64240_ETH
+#ifdef CONFIG_GALILEO_GT64240_ETH
extern unsigned char prom_mac_addr_base[6];
#endif
/* do handoff reconfiguration */
PMON_v2_setup();
-#ifdef CONFIG_GALILLEO_GT64240_ETH
+#ifdef CONFIG_GALILEO_GT64240_ETH
/* get the mac addr */
memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
#endif
break;
}
- err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(1 << (where & 3)), &data);
return err;
}
#include <int.h>
#include <cm.h>
-extern unsigned int mips_hpt_frequency;
+static unsigned long cpj;
+
+static cycle_t hpt_read(void)
+{
+ return read_c0_count2();
+}
+
+static void timer_ack(void)
+{
+ write_c0_compare(cpj);
+}
/*
* pnx8550_time_init() - it does the following things:
* HZ timer interrupts per second.
*/
mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+ cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+ write_c0_count(0);
+ timer_ack();
+
+ /* Setup Timer 2 */
+ write_c0_count2(0);
+ write_c0_compare2(0xffffffff);
+
+ clocksource_mips.read = hpt_read;
+ mips_timer_ack = timer_ack;
+}
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+ /* Timer 2 clear interrupt */
+ write_c0_compare2(-1);
+ return IRQ_HANDLED;
}
+static struct irqaction monotonic_irqaction = {
+ .handler = monotonic_interrupt,
+ .flags = IRQF_DISABLED,
+ .name = "Monotonic timer",
+};
+
void __init plat_timer_setup(struct irqaction *irq)
{
int configPR;
setup_irq(PNX8550_INT_TIMER1, irq);
+ setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
- /* Start timer1 */
+ /* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
- /* Timer 2 stop */
+ /* Timer 2 start */
configPR = read_c0_config7();
- configPR |= 0x00000010;
+ configPR &= ~0x00000010;
write_c0_config7(configPR);
- write_c0_count2(0);
- write_c0_compare2(0xffffffff);
-
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
/*
* Interrupt handing routines for NEC VR4100 series.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
if (cascade->get_irq != NULL) {
unsigned int source_irq = irq;
desc = irq_desc + source_irq;
- desc->chip->ack(source_irq);
+ if (desc->chip->mask_ack)
+ desc->chip->mask_ack(source_irq);
+ else {
+ desc->chip->mask(source_irq);
+ desc->chip->ack(source_irq);
+ }
irq = cascade->get_irq(irq);
if (irq < 0)
atomic_inc(&irq_err_count);
else
irq_dispatch(irq);
- desc->chip->end(source_irq);
+ if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+ desc->chip->unmask(source_irq);
} else
do_IRQ(irq);
}
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
if (cpu != 0 && cpu < parisc_max_cpus)
smp_boot_one_cpu(cpu);
select RTAS_PROC
select PPC_MPC52xx
select PPC_NATIVE
- default y
+ default n
config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
select PPC_NATIVE
- default y
+ default n
config PPC_MAPLE
depends on PPC_MULTIPLATFORM && PPC64
select PPC_970_NAP
select PPC_NATIVE
select PPC_RTAS
+ select ATA_NONSTANDARD if ATA
default n
help
This option enables support for the Maple 970FX Evaluation Board.
select UDBG_RTAS_CONSOLE
config PPC_PS3
- bool "Sony PS3"
+ bool "Sony PS3 (incomplete)"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor.
+ Support for this platform is not yet complete, so
+ enabling this will not result in a bootable kernel on a
+ PS3 system.
config PPC_NATIVE
bool
$(obj)/zImage.ps3: vmlinux
$(STRIP) -s -R .comment $< -o $@
+$(obj)/zImage.initrd.ps3: vmlinux
+ @echo " WARNING zImage.initrd.ps3 not supported (yet)"
+
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
* option) any later version.
*/
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
/ {
model = "Lite5200";
compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
- device_type = "i2s";
+ device_type = "sound";
compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
- device_type = "ac97";
+ device_type = "sound";
compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;
* option) any later version.
*/
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
/ {
model = "Lite5200b";
compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
- device_type = "i2s";
+ device_type = "sound";
compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
- device_type = "ac97";
+ device_type = "sound";
compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Wed Nov 22 15:33:04 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:12:56 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_PS3=y
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
#
# Kernel options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
-CONFIG_BONDING=y
+CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
-# CONFIG_SKY2 is not set
+CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=m
+CONFIG_SPIDER_NET=y
# CONFIG_QLA3XXX is not set
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=m
+
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
#
# USB Gadget Support
#
#
# InfiniBand support
#
-CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
+# CONFIG_INFINIBAND_SRP is not set
+# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
#
# Network File Systems
#
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
+CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:22:54 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:12:58 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
CONFIG_PPC_CHRP=y
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_KEXEC is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_MV643XX_ETH_0 is not set
# CONFIG_MV643XX_ETH_1 is not set
# CONFIG_MV643XX_ETH_2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_BRIQ_PANEL=m
# CONFIG_HVC_RTAS is not set
#
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:22:55 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:15:04 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
CONFIG_U3_DART=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_ADB_PMU=y
# CONFIG_ADB_PMU_LED is not set
CONFIG_PMAC_SMU=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+# CONFIG_PMAC_RACKMETER is not set
#
# Network device support
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_AGP=m
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
#
# CONFIG_SOUND_PRIME is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET_MII is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc1
-# Fri Oct 6 13:25:04 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:16:44 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_POWER3=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
CONFIG_PPC_ISERIES=y
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
# CONFIG_U3_DART is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
+CONFIG_PPC_INDIRECT_IO=y
+CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPIC is not set
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
#
# Multimedia devices
#
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
-CONFIG_GENERIC_ACL=y
#
# Partition Types
# Distributed Lock Manager
#
CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Wed Nov 15 20:36:30 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:17:58 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
# CONFIG_EV64360 is not set
CONFIG_PPC_GEN550=y
CONFIG_MPC10X_BRIDGE=y
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Mon Nov 27 11:08:20 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:18:18 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
-CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MPC52xx=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Mon Oct 9 11:59:34 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:19:02 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_U3_DART=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_RTAS_FLASH is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_MPIC=y
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
#
# IPMI
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB Imaging devices
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
# CONFIG_IRQSTACKS is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:26:55 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:20:53 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_ISERIES is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_PPC_TODC is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
+# CONFIG_LINKSTATION is not set
CONFIG_MPC7448HPC2=y
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
# CONFIG_EV64360 is not set
CONFIG_TSI108_BRIDGE=y
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_TSI108_ETH=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Mon Sep 25 19:41:14 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:23:43 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# Platform support
#
+# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC834x_SYS is not set
CONFIG_MPC834x_ITX=y
+# CONFIG_MPC8360E_PB is not set
CONFIG_MPC834x=y
# CONFIG_MPIC is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_INTEL_IOATDMA=y
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:28:54 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:24:10 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# Platform support
#
+# CONFIG_MPC832x_MDS is not set
CONFIG_MPC834x_SYS=y
# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC8360E_PB is not set
CONFIG_MPC834x=y
# CONFIG_MPIC is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Thu Sep 21 18:14:27 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:24:40 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# Platform support
#
+# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC8360E_PB=y
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# QE Options
#
-# CONFIG_UCC_SLOW is not set
+CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:29:23 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:25:24 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# Platform support
#
CONFIG_MPC8540_ADS=y
+# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC8540=y
CONFIG_PPC_INDIRECT_PCI_BE=y
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# Cryptographic options
#
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc4
-# Fri Aug 11 16:45:05 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:25:53 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
CONFIG_CPM2=y
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC8560=y
CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
#
# Kernel options
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_PC_KEYBOARD is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
#
# IPMI
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# Cryptographic options
#
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:29:49 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:26:46 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# Platform support
#
# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
CONFIG_MPC8540=y
CONFIG_PPC_INDIRECT_PCI_BE=y
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# Cryptographic options
#
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:30:15 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:27:14 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
+CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-CONFIG_SLOB=y
+# CONFIG_SLOB is not set
#
# Loadable module support
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# Cryptographic options
#
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:30:23 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:28:56 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_PPC_NATIVE=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+CONFIG_PM_SYSFS_DEPRECATED=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SECCOMP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_MESH_SYNC_RATE=5
CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
CONFIG_SCSI_MAC53C94=y
+# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_THERM_ADT746X=m
# CONFIG_WINDFARM is not set
# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
#
# Network device support
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_PMACZILOG=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_AGP=m
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
#
# CONFIG_SOUND_PRIME is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:45:11 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:28:58 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_POWER3=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+CONFIG_PPC_DCR_MMIO=y
+CONFIG_PPC_DCR=y
+CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_TASK_XACCT is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
+CONFIG_PPC_ISERIES=y
+# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
+# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_XICS=y
CONFIG_U3_DART=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
+CONFIG_PPC_INDIRECT_IO=y
+CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
#
CONFIG_SPU_FS=m
CONFIG_SPU_BASE=y
-CONFIG_SPUFS_MMAP=y
CONFIG_CBE_RAS=y
+CONFIG_CBE_THERM=m
+CONFIG_CBE_CPUFREQ=m
#
# Kernel options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_ADB_PMU=y
# CONFIG_ADB_PMU_LED is not set
CONFIG_PMAC_SMU=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+# CONFIG_PMAC_RACKMETER is not set
#
# Network device support
CONFIG_IBMVETH=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=m
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Wan interfaces
#
# CONFIG_WAN is not set
+CONFIG_ISERIES_VETH=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
+CONFIG_HVC_ISERIES=y
CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
#
#
# CONFIG_SOUND_PRIME is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# iSeries device drivers
+#
+# CONFIG_VIOCONS is not set
+CONFIG_VIODASD=y
+CONFIG_VIOCD=m
+CONFIG_VIOTAPE=m
+CONFIG_VIOPATH=y
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_HCALL_STATS is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Tue Nov 21 19:38:53 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:29:11 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:45:12 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:31:27 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
CONFIG_POWER3=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_MPIC=y
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
+# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
CONFIG_IBMVETH=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+CONFIG_EHEA=m
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_EHCA=m
+CONFIG_INFINIBAND_EHCA_SCALING=y
+# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_MINIX_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_HCALL_STATS=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
+#ifdef CONFIG_BUG
+ DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
+#endif
return 0;
}
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
+#include <asm/bug.h>
/*
* System calls.
li r0,0
mtcr r0
+#ifdef CONFIG_BUG
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
lbz r0,PACASOFTIRQEN(r13)
1: tdnei r0,0
-.section __bug_table,"a"
- .llong 1b,__LINE__ + 0x1000000, 1f, 2f
-.previous
-.section .rodata,"a"
-1: .asciz __FILE__
-2: .asciz "enter_rtas"
-.previous
-
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
+#endif
+
/* Hard-disable interrupts */
mfmsr r6
rldicl r7,r6,48,1
{ .type = "plb5", },
{ .type = "plb4", },
{ .type = "opb", },
+ { .type = "ebc", },
{},
};
np = scan_OF_for_pci_dev(parent, bus->self->devfn);
of_node_put(parent);
- /* sanity check */
- if (strcmp(np->type, "pci") != 0)
- printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n",
- np->type, np->full_name);
-
return np;
}
DBG(" class: 0x%x\n", dev->class);
dev->current_state = 4; /* unknown power state */
+ dev->error_state = pci_channel_io_normal;
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
- if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate))
+ if (in_bus >= bus->number && in_bus <= bus->subordinate)
break;
bus = NULL;
}
/*
* Old machines just have a list of interrupt numbers
- * and no interrupt-controller nodes.
+ * and no interrupt-controller nodes. We also have dodgy
+ * cases where the APPL,interrupts property is completely
+ * missing behind pci-pci bridges and we have to get it
+ * from the parent (the bridge itself, as apple just wired
+ * everything together on these)
*/
- ints = get_property(device, "AAPL,interrupts", &intlen);
+ while (device) {
+ ints = get_property(device, "AAPL,interrupts", &intlen);
+ if (ints != NULL)
+ break;
+ device = device->parent;
+ if (device && strcmp(device->type, "pci") != 0)
+ break;
+ }
if (ints == NULL)
return -EINVAL;
intlen /= sizeof(u32);
return -EINVAL;
if (old_ctx != NULL) {
+ struct mcontext __user *mctx;
+
+ /*
+ * old_ctx might not be 16-byte aligned, in which
+ * case old_ctx->uc_mcontext won't be either.
+ * Because we have the old_ctx->uc_pad2 field
+ * before old_ctx->uc_mcontext, we need to round down
+ * from &old_ctx->uc_mcontext to a 16-byte boundary.
+ */
+ mctx = (struct mcontext __user *)
+ ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
- || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
+ || save_user_regs(regs, mctx, 0)
|| put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked)
- || __put_user(to_user_ptr(&old_ctx->uc_mcontext),
- &old_ctx->uc_regs))
+ || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
return -EFAULT;
}
if (new_ctx == NULL)
return -ENOSYS;
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
int c;
* pages though
*/
vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC;
+ /*
+ * Make sure the vDSO gets into every core dump.
+ * Dumping its contents makes post-mortem fully interpretable later
+ * without matching up the same kernel and hardware config to see
+ * what PC values meant.
+ */
+ vma->vm_flags |= VM_ALWAYSDUMP;
vma->vm_flags |= mm->def_flags;
vma->vm_page_prot = protection_map[vma->vm_flags & 0x7];
vma->vm_ops = &vdso_vmops;
struct vm_area_struct *vma;
vma = find_vma(current->mm, addr);
- if (!vma || ((addr + len) <= vma->vm_start))
+ if (TASK_SIZE - len >= addr &&
+ (!vma || ((addr + len) <= vma->vm_start)))
return 0;
return -ENOMEM;
return -EINVAL;
if (len & ~HPAGE_MASK)
return -EINVAL;
+ if (len > TASK_SIZE)
+ return -ENOMEM;
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -EINVAL;
BUG_ON((addr + len) < addr);
if (test_thread_flag(TIF_32BIT)) {
- /* Paranoia, caller should have dealt with this */
- BUG_ON((addr + len) > 0x100000000UL);
-
curareas = current->mm->context.low_htlb_areas;
/* First see if we can use the hint address */
.name = "lite52xx",
.probe = lite52xx_probe,
.setup_arch = lite52xx_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
.show_cpuinfo = lite52xx_show_cpuinfo,
if (xlb) iounmap(xlb);
}
-static int __init
+void __init
mpc52xx_declare_of_platform_devices(void)
{
/* Find every child of the SOC node and add it to of_platform */
- return of_platform_bus_probe(NULL, NULL, NULL);
+ if (of_platform_bus_probe(NULL, NULL, NULL))
+ printk(KERN_ERR __FILE__ ": "
+ "Error while probing of_platform bus\n");
}
-device_initcall(mpc52xx_declare_of_platform_devices);
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
- if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
- if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
+obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
-obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
*/
#define SPIDER_DISABLE_PREFETCH
-#define MAX_SPIDERS 2
+#define MAX_SPIDERS 3
static struct spider_pci_bus {
void __iomem *regs;
#include "interrupt.h"
#include "spu_priv1_mmio.h"
+static DEFINE_MUTEX(add_spumem_mutex);
+
struct spu_pdata {
- int nid;
struct device_node *devnode;
struct spu_priv1 __iomem *priv1;
};
EXPORT_SYMBOL_GPL(spu_devnode);
-static int __init find_spu_node_id(struct device_node *spe)
-{
- const unsigned int *id;
- struct device_node *cpu;
- cpu = spe->parent->parent;
- id = get_property(cpu, "node-id", NULL);
- return id ? *id : 0;
-}
-
static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
const char *prop)
{
- static DEFINE_MUTEX(add_spumem_mutex);
-
const struct address_prop {
unsigned long address;
unsigned int len;
start_pfn = p->address >> PAGE_SHIFT;
nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
- pgdata = NODE_DATA(spu_get_pdata(spu)->nid);
+ pgdata = NODE_DATA(spu->node);
zone = pgdata->node_zones;
/* XXX rethink locking here */
{
unsigned int isrc;
const u32 *tmp;
+ int nid;
/* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
return -ENODEV;
isrc = tmp[0];
+ tmp = get_property(np->parent->parent, "node-id", NULL);
+ if (!tmp) {
+ printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+ nid = spu->node;
+ } else
+ nid = tmp[0];
+
/* Add the node number */
- isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
+ isrc |= nid << IIC_IRQ_NODE_SHIFT;
/* Now map interrupts of all 3 classes */
spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
return ret;
}
-static int spu_map_resource(struct device_node *node, int nr,
- void __iomem** virt, unsigned long *phys)
+static int spu_map_resource(struct spu *spu, int nr,
+ void __iomem** virt, unsigned long *phys)
{
+ struct device_node *np = spu_get_pdata(spu)->devnode;
+ unsigned long start_pfn, nr_pages;
+ struct pglist_data *pgdata;
+ struct zone *zone;
struct resource resource = { };
+ unsigned long len;
int ret;
- ret = of_address_to_resource(node, nr, &resource);
+ ret = of_address_to_resource(np, nr, &resource);
if (ret)
goto out;
if (phys)
*phys = resource.start;
- *virt = ioremap(resource.start, resource.end - resource.start);
+ len = resource.end - resource.start + 1;
+ *virt = ioremap(resource.start, len);
if (!*virt)
ret = -EINVAL;
+ start_pfn = resource.start >> PAGE_SHIFT;
+ nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ pgdata = NODE_DATA(spu->node);
+ zone = pgdata->node_zones;
+
+ /* XXX rethink locking here */
+ mutex_lock(&add_spumem_mutex);
+ ret = __add_pages(zone, start_pfn, nr_pages);
+ mutex_unlock(&add_spumem_mutex);
+
out:
return ret;
}
-static int __init spu_map_device(struct spu *spu, struct device_node *node)
+static int __init spu_map_device(struct spu *spu)
{
+ struct device_node *np = spu_get_pdata(spu)->devnode;
int ret = -ENODEV;
- spu->name = get_property(node, "name", NULL);
+
+ spu->name = get_property(np, "name", NULL);
if (!spu->name)
goto out;
- ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store,
- &spu->local_store_phys);
+ ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store,
+ &spu->local_store_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 0\n",
- node->full_name);
+ np->full_name);
goto out;
}
- ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem,
- &spu->problem_phys);
+ ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem,
+ &spu->problem_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 1\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
- ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2,
- NULL);
+ ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 2\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
if (!firmware_has_feature(FW_FEATURE_LPAR))
- ret = spu_map_resource(node, 3,
- (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
+ ret = spu_map_resource(spu, 3,
+ (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 3\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
- pr_debug("spu_new: %s maps:\n", node->full_name);
+ pr_debug("spu_new: %s maps:\n", np->full_name);
pr_debug(" local store : 0x%016lx -> 0x%p\n",
spu->local_store_phys, spu->local_store);
pr_debug(" problem state : 0x%016lx -> 0x%p\n",
spu->problem_phys, spu->problem);
pr_debug(" priv2 : 0x%p\n", spu->priv2);
pr_debug(" priv1 : 0x%p\n",
- spu_get_pdata(spu)->priv1);
+ spu_get_pdata(spu)->priv1);
return 0;
ret = -ENOMEM;
goto out;
}
+ spu_get_pdata(spu)->devnode = of_node_get(spe);
- spu->node = find_spu_node_id(spe);
+ spu->node = of_node_to_nid(spe);
if (spu->node >= MAX_NUMNODES) {
printk(KERN_WARNING "SPE %s on node %d ignored,"
" node number too big\n", spe->full_name, spu->node);
goto out_free;
}
- spu_get_pdata(spu)->nid = of_node_to_nid(spe);
- if (spu_get_pdata(spu)->nid == -1)
- spu_get_pdata(spu)->nid = 0;
-
- ret = spu_map_device(spu, spe);
+ ret = spu_map_device(spu);
/* try old method */
if (ret)
ret = spu_map_device_old(spu, spe);
if (ret)
goto out_unmap;
- spu_get_pdata(spu)->devnode = of_node_get(spe);
-
pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", spu->name,
spu->local_store, spu->problem, spu_get_pdata(spu)->priv1,
spu->priv2, spu->number);
config VIOPATH
bool
- depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
+ depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
default y
#include <asm/system.h>
#include <asm/paca.h>
+#include <asm/firmware.h>
#include <asm/iseries/it_lp_queue.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_event.h>
{
struct proc_dir_entry *e;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+
e = create_proc_entry("iSeries/lpevents", S_IFREG|S_IRUGO, NULL);
if (e)
e->proc_fops = &proc_lpevents_operations;
#include <asm/uaccess.h>
#include <asm/paca.h>
#include <asm/abs_addr.h>
+#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/mf.h>
#include <asm/iseries/hv_lp_config.h>
char name[2];
int i;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+
mf_proc_root = proc_mkdir("iSeries/mf", NULL);
if (!mf_proc_root)
return 1;
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/lppaca.h>
+#include <asm/firmware.h>
#include <asm/iseries/hv_call_xm.h>
#include "processor_vpd.h"
static int __init iseries_proc_create(void)
{
- struct proc_dir_entry *e = proc_mkdir("iSeries", 0);
+ struct proc_dir_entry *e;
+
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+
+ e = proc_mkdir("iSeries", 0);
if (!e)
return 1;
{
struct proc_dir_entry *e;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+
e = create_proc_entry("iSeries/titanTod", S_IFREG|S_IRUGO, NULL);
if (e)
e->proc_fops = &proc_titantod_operations;
static int __init iSeries_src_init(void)
{
/* clear the progress line */
- ppc_md.progress(" ", 0xffff);
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ ppc_md.progress(" ", 0xffff);
return 0;
}
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/prom.h>
+#include <asm/firmware.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_lp_config.h>
{
struct proc_dir_entry *e;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+
e = create_proc_entry("iSeries/config", 0, NULL);
if (e)
e->proc_fops = &proc_viopath_operations;
printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
openpic_addr, has_isus);
}
- of_node_put(root);
BUG_ON(openpic_addr == 0);
}
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
- of_node_put(root);
mpic = mpic_alloc(mpic_node, openpic_addr, MPIC_PRIMARY, 0, 0,
" PAS-OPIC ");
-obj-y += setup.o mm.o smp.o time.o hvcall.o htab.o repository.o
+obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o
obj-y += interrupt.o exports.o os-area.o
+obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SPU_BASE) += spu.o
result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
- if (!result)
+ if (result)
pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
BEGIN_FTR_SECTION; \
mfspr r0,SPRN_PURR; /* get PURR and */ \
std r0,STK_PARM(r6)(r1); /* save for later */ \
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR);
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);
/*
* postcall is performed immediately before function return which
mfspr r8,SPRN_PURR; /* PURR after */ \
ld r6,STK_PARM(r6)(r1); /* PURR before */ \
subf r6,r6,r8; /* delta */ \
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
+END_FTR_SECTION_IFSET(CPU_FTR_PURR); \
ld r5,STK_PARM(r5)(r1); /* timebase before */ \
subf r5,r5,r7; /* time delta */ \
\
ld r7,HCALL_STAT_PURR(r4); /* PURR */ \
add r7,r7,r6; \
std r7,HCALL_STAT_PURR(r4); \
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
+END_FTR_SECTION_IFSET(CPU_FTR_PURR); \
1:
#else
#define HCALL_INST_PRECALL
HVSC /* invoke the hypervisor */
+ mr r0,r12
ld r12,STK_PARM(r4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r9, 40(r12)
std r10,48(r12)
std r11,56(r12)
- std r12,64(r12)
+ std r0, 64(r12)
HCALL_INST_POSTCALL
*/
static void *hc_start(struct seq_file *m, loff_t *pos)
{
- if ((int)*pos < HCALL_STAT_ARRAY_SIZE)
+ if ((int)*pos < (HCALL_STAT_ARRAY_SIZE-1))
return (void *)(unsigned long)(*pos + 1);
return NULL;
struct hcall_stats *hs = (struct hcall_stats *)m->private;
if (hs[h_num].num_calls) {
- if (!cpu_has_feature(CPU_FTR_PURR))
+ if (cpu_has_feature(CPU_FTR_PURR))
seq_printf(m, "%lu %lu %lu %lu\n", h_num<<2,
hs[h_num].num_calls,
hs[h_num].tb_total,
tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
phb->node);
iommu_table_setparms(phb, dn, tbl);
- dev->dev.archdata.dma_data = iommu_init_table(tbl, phb->node);
+ PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
+ dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
return;
}
static void xics_mask_real_irq(unsigned int irq)
{
int call_status;
- unsigned int server;
if (irq == XICS_IPI)
return;
return;
}
- server = get_irq_server(irq);
/* Have to set XIVE to 0xff to be able to remove a slot */
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, 0xff);
+ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq,
+ default_server, 0xff);
if (call_status != 0) {
printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)"
" returned %d\n", irq, call_status);
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
-obj-$(CONFIG_MTD) += rom.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
# Temporary hack until we have migrated to asm-powerpc
ifeq ($(ARCH),powerpc)
+obj-$(CONFIG_MTD) += rom.o
obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
endif
int __init mmio_nvram_init(void)
{
struct device_node *nvram_node;
- const unsigned long *buffer;
- int proplen;
unsigned long nvram_addr;
+ struct resource r;
int ret;
- ret = -ENODEV;
nvram_node = of_find_node_by_type(NULL, "nvram");
- if (!nvram_node)
+ if (!nvram_node) {
+ printk(KERN_WARNING "nvram: no node found in device-tree\n");
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(nvram_node, 0, &r);
+ if (ret) {
+ printk(KERN_WARNING "nvram: failed to get address (err %d)\n",
+ ret);
goto out;
-
- ret = -EIO;
- buffer = get_property(nvram_node, "reg", &proplen);
- if (proplen != 2*sizeof(unsigned long))
- goto out;
-
- ret = -ENODEV;
- nvram_addr = buffer[0];
- mmio_nvram_len = buffer[1];
- if ( (!mmio_nvram_len) || (!nvram_addr) )
+ }
+ nvram_addr = r.start;
+ mmio_nvram_len = r.end - r.start + 1;
+ if ( (!mmio_nvram_len) || (!nvram_addr) ) {
+ printk(KERN_WARNING "nvram: address or lenght is 0\n");
+ ret = -EIO;
goto out;
+ }
mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len);
- if (!mmio_nvram_start)
+ if (!mmio_nvram_start) {
+ printk(KERN_WARNING "nvram: failed to ioremap\n");
+ ret = -ENOMEM;
goto out;
+ }
- printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n",
- mmio_nvram_len >> 10, mmio_nvram_start);
+ printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
+ mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start);
ppc_md.nvram_read = mmio_nvram_read;
ppc_md.nvram_write = mmio_nvram_write;
u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
if (id == PCI_CAP_ID_HT) {
id = readb(devbase + pos + 3);
- if (id == HT_CAPTYPE_IRQ)
+ if ((id & HT_5BIT_CAP_MASK) == HT_CAPTYPE_IRQ)
break;
}
}
ptbl_entries = 3;
- if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition),
+ if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
GFP_KERNEL)) == NULL) {
printk(KERN_WARNING "Can't alloc MTD partition table\n");
return -ENOMEM;
}
- memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition));
ptbl[0].name = "reserved";
ptbl[0].offset = 0;
srl %r7,28
clr %r6,%r7 # compare cc with last access code
be .Lsame-.LPG1(%r13)
- b .Lchkmem-.LPG1(%r13)
+ lhi %r8,0 # no program checks
+ b .Lsavchk-.LPG1(%r13)
.Lsame:
ar %r5,%r1 # add 128KB to end of chunk
bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
.Lchkmem: # > 2GB or tprot got a program check
+ lhi %r8,1 # set program check flag
+.Lsavchk:
clr %r4,%r5 # chunk size > 0?
be .Lchkloop-.LPG1(%r13)
st %r4,0(%r3) # store start address of chunk
je .Ldonemem # if not, leave
chi %r10,0 # do we have chunks left?
je .Ldonemem
+ chi %r8,1 # program check ?
+ je .Lpgmchk
+ lr %r4,%r5 # potential new chunk
+ alr %r5,%r1 # add 128KB to end of chunk
+ j .Llpcnt
+.Lpgmchk:
alr %r5,%r1 # add 128KB to end of chunk
lr %r4,%r5 # potential new chunk
+.Llpcnt:
clr %r5,%r9 # should we go on?
jl .Lloop
.Ldonemem:
srl %r7,28
clr %r6,%r7 # compare cc with last access code
je .Lsame
- j .Lchkmem
+ lghi %r8,0 # no program checks
+ j .Lsavchk
.Lsame:
algr %r5,%r1 # add 128KB to end of chunk
# no need to check here,
brc 12,.Lloop # this is the same chunk
.Lchkmem: # > 16EB or tprot got a program check
+ lghi %r8,1 # set program check flag
+.Lsavchk:
clgr %r4,%r5 # chunk size > 0?
je .Lchkloop
stg %r4,0(%r3) # store start address of chunk
chi %r10, 0 # do we have chunks left?
je .Ldonemem
.Lhsaskip:
+ chi %r8,1 # program check ?
+ je .Lpgmchk
+ lgr %r4,%r5 # potential new chunk
+ algr %r5,%r1 # add 128KB to end of chunk
+ j .Llpcnt
+.Lpgmchk:
algr %r5,%r1 # add 128KB to end of chunk
lgr %r4,%r5 # potential new chunk
+.Llpcnt:
clgr %r5,%r9 # should we go on?
jl .Lloop
.Ldonemem:
int i;
memory_size = real_size = 0;
- max_phys = VMALLOC_END - VMALLOC_MIN_SIZE;
+ max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE;
memory_end &= PAGE_MASK;
max_mem = memory_end ? min(max_phys, memory_end) : max_phys;
int ret;
for_each_possible_cpu(cpu) {
- ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu);
+ struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+ c->hotpluggable = 1;
+ ret = register_cpu(c, cpu);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "
"failed (%d)\n", cpu, ret);
*/
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/futex.h>
struct vm_area_struct *vma;
int ret = -EFAULT;
+ if (in_atomic())
+ return ret;
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (unlikely(!vma))
{
int oldval = 0, newval, ret;
- pagefault_disable();
-
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("lr %2,%5\n",
default:
ret = -ENOSYS;
}
- pagefault_enable();
*old = oldval;
return ret;
}
if (map_start < map_end)
memmap_init_zone((unsigned long)(map_end - map_start),
- nid, zone, page_to_pfn(map_start));
+ nid, zone, page_to_pfn(map_start),
+ MEMMAP_EARLY);
}
}
}
EXPORT_SYMBOL(of_ioremap);
-void of_iounmap(void __iomem *base, unsigned long size)
+void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
{
iounmap(base);
}
/* IIep is write-through, not flushing. */
for (n = 0; n < nents; n++) {
BUG_ON(page_address(sg->page) == NULL);
- sg->dvma_address = virt_to_phys(page_address(sg->page));
+ sg->dvma_address =
+ virt_to_phys(page_address(sg->page)) + sg->offset;
sg->dvma_length = sg->length;
sg++;
}
* handler when auxio is not present-- unused for now...
*/
void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
/*
* sysctl - toggle power-off restriction for serial console
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Sat Dec 9 15:41:30 2006
+# Linux kernel version: 2.6.20-rc2
+# Thu Dec 28 15:09:49 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_UB=m
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
#
# HID Devices
#
# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_STORAGE is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HID_POWERBOOK is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# DMA Devices
#
+#
+# Virtualization
+#
+
#
# Misc Linux/SPARC drivers
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
printk(" [%s", isa_dev->prom_node->name);
}
-static struct linux_prom_registers * __init
-isa_dev_get_resource(struct sparc_isa_device *isa_dev)
+static void __init isa_dev_get_resource(struct sparc_isa_device *isa_dev)
{
struct linux_prom_registers *pregs;
unsigned long base, len;
int prop_len;
pregs = of_get_property(isa_dev->prom_node, "reg", &prop_len);
+ if (!pregs)
+ return;
/* Only the first one is interesting. */
len = pregs[0].reg_size;
request_resource(&isa_dev->bus->parent->io_space,
&isa_dev->resource);
-
- return pregs;
}
-static void __init isa_dev_get_irq(struct sparc_isa_device *isa_dev,
- struct linux_prom_registers *pregs)
+static void __init isa_dev_get_irq(struct sparc_isa_device *isa_dev)
{
struct of_device *op = of_find_device_by_node(isa_dev->prom_node);
printk(" ->");
while (dp) {
- struct linux_prom_registers *regs;
struct sparc_isa_device *isa_dev;
isa_dev = kzalloc(sizeof(*isa_dev), GFP_KERNEL);
isa_dev->bus = parent_isa_dev->bus;
isa_dev->prom_node = dp;
- regs = isa_dev_get_resource(isa_dev);
- isa_dev_get_irq(isa_dev, regs);
+ isa_dev_get_resource(isa_dev);
+ isa_dev_get_irq(isa_dev);
report_dev(isa_dev, 1);
struct device_node *dp = isa_br->prom_node->child;
while (dp) {
- struct linux_prom_registers *regs;
struct sparc_isa_device *isa_dev;
isa_dev = kzalloc(sizeof(*isa_dev), GFP_KERNEL);
isa_dev->bus = isa_br;
isa_dev->prom_node = dp;
- regs = isa_dev_get_resource(isa_dev);
- isa_dev_get_irq(isa_dev, regs);
+ isa_dev_get_resource(isa_dev);
+ isa_dev_get_irq(isa_dev);
report_dev(isa_dev, 0);
}
EXPORT_SYMBOL(of_ioremap);
-void of_iounmap(void __iomem *base, unsigned long size)
+void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
{
- release_region((unsigned long) base, size);
+ if (res->flags & IORESOURCE_MEM)
+ release_mem_region((unsigned long) base, size);
+ else
+ release_region((unsigned long) base, size);
}
EXPORT_SYMBOL(of_iounmap);
{
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
int ret = smp_boot_one_cpu(cpu);
rdpr %tl, %g1
cmp %g1, 1
bgu,pn %xcc, winfix_trampoline
- nop
- ba,pt %xcc, sparc64_realfault_common
mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4
+ ba,pt %xcc, sparc64_realfault_common
+ nop
/* Called from trap table:
* %g4: vaddr
prom_halt();
}
+static void __init trim_pavail(unsigned long *cur_size_p,
+ unsigned long *end_of_phys_p)
+{
+ unsigned long to_trim = *cur_size_p - cmdline_memory_size;
+ unsigned long avoid_start, avoid_end;
+ int i;
+
+ to_trim = PAGE_ALIGN(to_trim);
+
+ avoid_start = avoid_end = 0;
+#ifdef CONFIG_BLK_DEV_INITRD
+ avoid_start = initrd_start;
+ avoid_end = PAGE_ALIGN(initrd_end);
+#endif
+
+ /* Trim some pavail[] entries in order to satisfy the
+ * requested "mem=xxx" kernel command line specification.
+ *
+ * We must not trim off the kernel image area nor the
+ * initial ramdisk range (if any). Also, we must not trim
+ * any pavail[] entry down to zero in order to preserve
+ * the invariant that all pavail[] entries have a non-zero
+ * size which is assumed by all of the code in here.
+ */
+ for (i = 0; i < pavail_ents; i++) {
+ unsigned long start, end, kern_end;
+ unsigned long trim_low, trim_high, n;
+
+ kern_end = PAGE_ALIGN(kern_base + kern_size);
+
+ trim_low = start = pavail[i].phys_addr;
+ trim_high = end = start + pavail[i].reg_size;
+
+ if (kern_base >= start &&
+ kern_base < end) {
+ trim_low = kern_base;
+ if (kern_end >= end)
+ continue;
+ }
+ if (kern_end >= start &&
+ kern_end < end) {
+ trim_high = kern_end;
+ }
+ if (avoid_start &&
+ avoid_start >= start &&
+ avoid_start < end) {
+ if (trim_low > avoid_start)
+ trim_low = avoid_start;
+ if (avoid_end >= end)
+ continue;
+ }
+ if (avoid_end &&
+ avoid_end >= start &&
+ avoid_end < end) {
+ if (trim_high < avoid_end)
+ trim_high = avoid_end;
+ }
+
+ if (trim_high <= trim_low)
+ continue;
+
+ if (trim_low == start && trim_high == end) {
+ /* Whole chunk is available for trimming.
+ * Trim all except one page, in order to keep
+ * entry non-empty.
+ */
+ n = (end - start) - PAGE_SIZE;
+ if (n > to_trim)
+ n = to_trim;
+
+ if (n) {
+ pavail[i].phys_addr += n;
+ pavail[i].reg_size -= n;
+ to_trim -= n;
+ }
+ } else {
+ n = (trim_low - start);
+ if (n > to_trim)
+ n = to_trim;
+
+ if (n) {
+ pavail[i].phys_addr += n;
+ pavail[i].reg_size -= n;
+ to_trim -= n;
+ }
+ if (to_trim) {
+ n = end - trim_high;
+ if (n > to_trim)
+ n = to_trim;
+ if (n) {
+ pavail[i].reg_size -= n;
+ to_trim -= n;
+ }
+ }
+ }
+
+ if (!to_trim)
+ break;
+ }
+
+ /* Recalculate. */
+ *cur_size_p = 0UL;
+ for (i = 0; i < pavail_ents; i++) {
+ *end_of_phys_p = pavail[i].phys_addr +
+ pavail[i].reg_size;
+ *cur_size_p += pavail[i].reg_size;
+ }
+}
+
static unsigned long __init bootmem_init(unsigned long *pages_avail,
unsigned long phys_base)
{
end_of_phys_memory = pavail[i].phys_addr +
pavail[i].reg_size;
bytes_avail += pavail[i].reg_size;
- if (cmdline_memory_size) {
- if (bytes_avail > cmdline_memory_size) {
- unsigned long slack = bytes_avail - cmdline_memory_size;
-
- bytes_avail -= slack;
- end_of_phys_memory -= slack;
-
- pavail[i].reg_size -= slack;
- if ((long)pavail[i].reg_size <= 0L) {
- pavail[i].phys_addr = 0xdeadbeefUL;
- pavail[i].reg_size = 0UL;
- pavail_ents = i;
- } else {
- pavail[i+1].reg_size = 0Ul;
- pavail[i+1].phys_addr = 0xdeadbeefUL;
- pavail_ents = i + 1;
- }
- break;
- }
- }
}
- *pages_avail = bytes_avail >> PAGE_SHIFT;
-
- end_pfn = end_of_phys_memory >> PAGE_SHIFT;
+ /* Determine the location of the initial ramdisk before trying
+ * to honor the "mem=xxx" command line argument. We must know
+ * where the kernel image and the ramdisk image are so that we
+ * do not trim those two areas from the physical memory map.
+ */
#ifdef CONFIG_BLK_DEV_INITRD
/* Now have to check initial ramdisk, so that bootmap does not overwrite it */
}
}
#endif
+
+ if (cmdline_memory_size &&
+ bytes_avail > cmdline_memory_size)
+ trim_pavail(&bytes_avail,
+ &end_of_phys_memory);
+
+ *pages_avail = bytes_avail >> PAGE_SHIFT;
+
+ end_pfn = end_of_phys_memory >> PAGE_SHIFT;
+
/* Initialize the boot-time allocator. */
max_pfn = max_low_pfn = end_pfn;
min_low_pfn = (phys_base >> PAGE_SHIFT);
choice
prompt "Host memory split"
default HOST_VMSPLIT_3G
- ---help---
- This is needed when the host kernel on which you run has a non-default
- (like 2G/2G) memory split, instead of the customary 3G/1G. If you did
- not recompile your own kernel but use the default distro's one, you can
- safely accept the "Default split" option.
-
- It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via
- CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck
- patchset by Con Kolivas, or other ones) - option names match closely the
- host CONFIG_VM_SPLIT_* ones.
-
- A lower setting (where 1G/3G is lowest and 3G/1G is higher) will
- tolerate even more "normal" host kernels, but an higher setting will be
- stricter.
-
- So, if you do not know what to do here, say 'Default split'.
-
- config HOST_VMSPLIT_3G
- bool "Default split (3G/1G user/kernel host split)"
- config HOST_VMSPLIT_3G_OPT
- bool "3G/1G user/kernel host split (for full 1G low memory)"
- config HOST_VMSPLIT_2G
- bool "2G/2G user/kernel host split"
- config HOST_VMSPLIT_1G
- bool "1G/3G user/kernel host split"
+ help
+ This is needed when the host kernel on which you run has a non-default
+ (like 2G/2G) memory split, instead of the customary 3G/1G. If you did
+ not recompile your own kernel but use the default distro's one, you can
+ safely accept the "Default split" option.
+
+ It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via
+ CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck
+ patchset by Con Kolivas, or other ones) - option names match closely the
+ host CONFIG_VM_SPLIT_* ones.
+
+ A lower setting (where 1G/3G is lowest and 3G/1G is higher) will
+ tolerate even more "normal" host kernels, but an higher setting will be
+ stricter.
+
+ So, if you do not know what to do here, say 'Default split'.
+
+config HOST_VMSPLIT_3G
+ bool "Default split (3G/1G user/kernel host split)"
+config HOST_VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel host split (for full 1G low memory)"
+config HOST_VMSPLIT_2G
+ bool "2G/2G user/kernel host split"
+config HOST_VMSPLIT_1G
+ bool "1G/3G user/kernel host split"
endchoice
config TOP_ADDR
config STUB_CODE
hex
- default 0xbfffe000 if !HOST_2G_2G
- default 0x7fffe000 if HOST_2G_2G
+ default 0xbfffe000 if !HOST_VMSPLIT_2G
+ default 0x7fffe000 if HOST_VMSPLIT_2G
config STUB_DATA
hex
- default 0xbffff000 if !HOST_2G_2G
- default 0x7ffff000 if HOST_2G_2G
+ default 0xbffff000 if !HOST_VMSPLIT_2G
+ default 0x7ffff000 if HOST_VMSPLIT_2G
config STUB_START
hex
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-git14
-# Sat Dec 9 21:23:09 2006
+# Linux kernel version: 2.6.20-rc3
+# Fri Jan 5 11:54:41 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HID_POWERBOOK is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# DMA Devices
#
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
#
# Firmware Drivers
#
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
get_user(c,p++);
} while (c);
}
- put_user(NULL,argv);
+ put_user(0, argv);
current->mm->arg_end = current->mm->env_start = (unsigned long) p;
while (envc-->0) {
char c;
get_user(c,p++);
} while (c);
}
- put_user(NULL,envp);
+ put_user(0, envp);
current->mm->env_end = (unsigned long) p;
return sp;
}
#define ELF_NGREG (sizeof (struct user_regs_struct32) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-/*
- * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the vsyscall DSO contents. Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the vsyscall DSO was being used.
- */
-#define ELF_CORE_EXTRA_PHDRS (find_vma(current->mm, VSYSCALL32_BASE) ? \
- (VSYSCALL32_EHDR->e_phnum) : 0)
-#define ELF_CORE_WRITE_EXTRA_PHDRS \
-do { \
- if (find_vma(current->mm, VSYSCALL32_BASE)) { \
- const struct elf32_phdr *const vsyscall_phdrs = \
- (const struct elf32_phdr *) (VSYSCALL32_BASE \
- + VSYSCALL32_EHDR->e_phoff);\
- int i; \
- Elf32_Off ofs = 0; \
- for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) { \
- struct elf32_phdr phdr = vsyscall_phdrs[i]; \
- if (phdr.p_type == PT_LOAD) { \
- BUG_ON(ofs != 0); \
- ofs = phdr.p_offset = offset; \
- phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \
- phdr.p_filesz = phdr.p_memsz; \
- offset += phdr.p_filesz; \
- } \
- else \
- phdr.p_offset += ofs; \
- phdr.p_paddr = 0; /* match other core phdrs */ \
- DUMP_WRITE(&phdr, sizeof(phdr)); \
- } \
- } \
-} while (0)
-#define ELF_CORE_WRITE_EXTRA_DATA \
-do { \
- if (find_vma(current->mm, VSYSCALL32_BASE)) { \
- const struct elf32_phdr *const vsyscall_phdrs = \
- (const struct elf32_phdr *) (VSYSCALL32_BASE \
- + VSYSCALL32_EHDR->e_phoff); \
- int i; \
- for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) { \
- if (vsyscall_phdrs[i].p_type == PT_LOAD) \
- DUMP_WRITE((void *) (u64) vsyscall_phdrs[i].p_vaddr,\
- PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \
- } \
- } \
-} while (0)
-
struct elf_siginfo
{
int si_signo; /* signal number */
vma->vm_end = VSYSCALL32_END;
/* MAYWRITE to allow gdb to COW and set breakpoints */
vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
+ /*
+ * Make sure the vDSO gets into every core dump.
+ * Dumping its contents makes post-mortem fully interpretable later
+ * without matching up the same kernel and hardware config to see
+ * what PC values meant.
+ */
+ vma->vm_flags |= VM_ALWAYSDUMP;
vma->vm_flags |= mm->def_flags;
vma->vm_page_prot = protection_map[vma->vm_flags & 7];
vma->vm_ops = &syscall32_vm_ops;
return 0;
}
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_start == VSYSCALL32_BASE &&
+ vma->vm_mm && vma->vm_mm->task_size == IA32_PAGE_OFFSET)
+ return "[vdso]";
+ return NULL;
+}
+
static int __init init_syscall32(void)
{
syscall32_page = (void *)get_zeroed_page(GFP_KERNEL);
config X86_ACPI_CPUFREQ
tristate "ACPI Processor P-States driver"
+ select CPU_FREQ_TABLE
depends on ACPI_PROCESSOR
help
This driver adds a CPUFreq driver which utilizes the ACPI
static void ati_bugs(void)
{
+ if (timer_over_8254 == 1) {
+ timer_over_8254 = 0;
+ printk(KERN_INFO
+ "ATI board detected. Disabling timer routing over 8254.\n");
+ }
}
static void intel_bugs(void)
static int no_timer_check;
+static int disable_timer_pin_1 __initdata;
+
+int timer_over_8254 __initdata = 1;
+
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
}
early_param("noapic", disable_ioapic_setup);
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
+{
+ disable_timer_pin_1 = 1;
+ return 1;
+}
+__setup("disable_timer_pin_1", disable_timer_pin_setup);
+
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
+
/*
* Find the IRQ entry number of a certain pin.
*/
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
*/
-
-static int try_apic_pin(int apic, int pin, char *msg)
-{
- apic_printk(APIC_VERBOSE, KERN_INFO
- "..TIMER: trying IO-APIC=%d PIN=%d %s",
- apic, pin, msg);
-
- /*
- * Ok, does IRQ0 through the IOAPIC work?
- */
- if (!no_timer_check && timer_irq_works()) {
- nmi_watchdog_default();
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- setup_nmi();
- enable_8259A_irq(0);
- }
- return 1;
- }
- clear_IO_APIC_pin(apic, pin);
- apic_printk(APIC_QUIET, KERN_ERR " .. failed\n");
- return 0;
-}
-
-/* The function from hell */
-static void check_timer(void)
+static inline void check_timer(void)
{
int apic1, pin1, apic2, pin2;
int vector;
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- /* Do this first, otherwise we get double interrupts on ATI boards */
- if ((pin1 != -1) && try_apic_pin(apic1, pin1,"with 8259 IRQ0 disabled"))
- return;
+ apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
- /* Now try again with IRQ0 8259A enabled.
- Assumes timer is on IO-APIC 0 ?!? */
- enable_8259A_irq(0);
- unmask_IO_APIC_irq(0);
- if (try_apic_pin(apic1, pin1, "with 8259 IRQ0 enabled"))
- return;
- disable_8259A_irq(0);
-
- /* Always try pin0 and pin2 on APIC 0 to handle buggy timer overrides
- on Nvidia boards */
- if (!(apic1 == 0 && pin1 == 0) &&
- try_apic_pin(0, 0, "fallback with 8259 IRQ0 disabled"))
- return;
- if (!(apic1 == 0 && pin1 == 2) &&
- try_apic_pin(0, 2, "fallback with 8259 IRQ0 disabled"))
- return;
+ if (pin1 != -1) {
+ /*
+ * Ok, does IRQ0 through the IOAPIC work?
+ */
+ unmask_IO_APIC_irq(0);
+ if (!no_timer_check && timer_irq_works()) {
+ nmi_watchdog_default();
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ setup_nmi();
+ enable_8259A_irq(0);
+ }
+ if (disable_timer_pin_1 > 0)
+ clear_IO_APIC_pin(0, pin1);
+ return;
+ }
+ clear_IO_APIC_pin(apic1, pin1);
+ apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
+ "connected to IO-APIC\n");
+ }
- /* Then try pure 8259A routing on the 8259 as reported by BIOS*/
- enable_8259A_irq(0);
+ apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
+ "through the 8259A ... ");
if (pin2 != -1) {
+ apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
+ apic2, pin2);
+ /*
+ * legacy devices should be connected to IO APIC #0
+ */
setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
- if (try_apic_pin(apic2,pin2,"8259A broadcast ExtINT from BIOS"))
+ if (timer_irq_works()) {
+ apic_printk(APIC_VERBOSE," works.\n");
+ nmi_watchdog_default();
+ if (nmi_watchdog == NMI_IO_APIC) {
+ setup_nmi();
+ }
return;
+ }
+ /*
+ * Cleanup, just in case ...
+ */
+ clear_IO_APIC_pin(apic2, pin2);
}
-
- /* Tried all possibilities to go through the IO-APIC. Now come the
- really cheesy fallbacks. */
+ apic_printk(APIC_VERBOSE," failed.\n");
if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
return 0;
- if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
- return 0; /* no lapic support */
nmi_watchdog = nmi;
return 1;
}
void *tbl;
int calgary_found = 0;
unsigned long ptr;
- int offset;
+ unsigned int offset, prev_offset;
int ret;
/*
if (!early_pci_allowed())
return;
+ printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n");
+
ptr = (unsigned long)phys_to_virt(get_bios_ebda());
rio_table_hdr = NULL;
+ prev_offset = 0;
offset = 0x180;
- while (offset) {
+ /*
+ * The next offset is stored in the 1st word.
+ * Only parse up until the offset increases:
+ */
+ while (offset > prev_offset) {
/* The block id is stored in the 2nd word */
if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
}
- /* The next offset is stored in the 1st word. 0 means no more */
+ prev_offset = offset;
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
- printk(KERN_ERR "Calgary: Unable to locate "
- "Rio Grande Table in EBDA - bailing!\n");
+ printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table "
+ "in EBDA - bailing!\n");
return;
}
ret = build_detail_arrays();
if (ret) {
- printk(KERN_ERR "Calgary: build_detail_arrays ret %d\n", ret);
+ printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret);
return;
}
}
}
+ printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n",
+ calgary_found ? "found" : "not found");
+
if (calgary_found) {
iommu_detected = 1;
calgary_detected = 1;
static void default_idle(void)
{
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
local_irq_disable();
if (!need_resched()) {
/* Enables interrupts one instruction before HLT.
*/
#define TICK_COUNT 100000000
+#define TICK_MIN 5000
+
+/*
+ * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none
+ * occurs between the reads of the hpet & TSC.
+ */
+static void __init read_hpet_tsc(int *hpet, int *tsc)
+{
+ int tsc1, tsc2, hpet1;
+
+ do {
+ tsc1 = get_cycles_sync();
+ hpet1 = hpet_readl(HPET_COUNTER);
+ tsc2 = get_cycles_sync();
+ } while (tsc2 - tsc1 > TICK_MIN);
+ *hpet = hpet1;
+ *tsc = tsc2;
+}
+
static unsigned int __init hpet_calibrate_tsc(void)
{
local_irq_save(flags);
local_irq_disable();
- hpet_start = hpet_readl(HPET_COUNTER);
- rdtscl(tsc_start);
+ read_hpet_tsc(&hpet_start, &tsc_start);
do {
local_irq_disable();
- hpet_now = hpet_readl(HPET_COUNTER);
- tsc_now = get_cycles_sync();
+ read_hpet_tsc(&hpet_now, &tsc_now);
local_irq_restore(flags);
} while ((tsc_now - tsc_start) < TICK_COUNT &&
(hpet_now - hpet_start) < TICK_COUNT);
/*
* This handles the process stack:
*/
- tinfo = current_thread_info();
+ tinfo = task_thread_info(tsk);
HANDLE_STACK (valid_stack_ptr(tinfo, stack));
#undef HANDLE_STACK
put_cpu();
cfq_remove_request(next);
}
+static int cfq_allow_merge(request_queue_t *q, struct request *rq,
+ struct bio *bio)
+{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
+ const int rw = bio_data_dir(bio);
+ struct cfq_queue *cfqq;
+ pid_t key;
+
+ /*
+ * Disallow merge of a sync bio into an async request.
+ */
+ if ((bio_data_dir(bio) == READ || bio_sync(bio)) && !rq_is_sync(rq))
+ return 0;
+
+ /*
+ * Lookup the cfqq that this bio will be queued with. Allow
+ * merge only if rq is queued there.
+ */
+ key = cfq_queue_pid(current, rw, bio_sync(bio));
+ cfqq = cfq_find_cfq_hash(cfqd, key, current->ioprio);
+
+ if (cfqq == RQ_CFQQ(rq))
+ return 1;
+
+ return 0;
+}
+
static inline void
__cfq_set_active_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
.elevator_merge_fn = cfq_merge,
.elevator_merged_fn = cfq_merged_request,
.elevator_merge_req_fn = cfq_merged_requests,
+ .elevator_allow_merge_fn = cfq_allow_merge,
.elevator_dispatch_fn = cfq_dispatch_requests,
.elevator_add_req_fn = cfq_insert_request,
.elevator_activate_req_fn = cfq_activate_request,
#define rq_hash_key(rq) ((rq)->sector + (rq)->nr_sectors)
#define ELV_ON_HASH(rq) (!hlist_unhashed(&(rq)->hash))
+/*
+ * Query io scheduler to see if the current process issuing bio may be
+ * merged with rq.
+ */
+static int elv_iosched_allow_merge(struct request *rq, struct bio *bio)
+{
+ request_queue_t *q = rq->q;
+ elevator_t *e = q->elevator;
+
+ if (e->ops->elevator_allow_merge_fn)
+ return e->ops->elevator_allow_merge_fn(q, rq, bio);
+
+ return 1;
+}
+
/*
* can we safely merge with this request?
*/
return 0;
/*
- * same device and no special stuff set, merge is ok
+ * must be same device and not a special request
*/
- if (rq->rq_disk == bio->bi_bdev->bd_disk && !rq->special)
- return 1;
+ if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
+ return 0;
- return 0;
+ if (!elv_iosched_allow_merge(rq, bio))
+ return 0;
+
+ return 1;
}
EXPORT_SYMBOL(elv_rq_merge_ok);
*/
rq->cmd_flags |= REQ_SOFTBARRIER;
+ /*
+ * Most requeues happen because of a busy condition,
+ * don't force unplug of the queue for that case.
+ */
+ unplug_it = 0;
+
if (q->ordseq == 0) {
list_add(&rq->queuelist, &q->queue_head);
break;
}
list_add_tail(&rq->queuelist, pos);
- /*
- * most requeues happen because of a busy condition, don't
- * force unplug of the queue for that case.
- */
- unplug_it = 0;
break;
default:
return 1;
}
-static int ll_back_merge_fn(request_queue_t *q, struct request *req,
- struct bio *bio)
+int ll_back_merge_fn(request_queue_t *q, struct request *req, struct bio *bio)
{
unsigned short max_sectors;
int len;
return ll_new_hw_segment(q, req, bio);
}
+EXPORT_SYMBOL(ll_back_merge_fn);
static int ll_front_merge_fn(request_queue_t *q, struct request *req,
struct bio *bio)
}
q->request_fn = rfn;
- q->back_merge_fn = ll_back_merge_fn;
- q->front_merge_fn = ll_front_merge_fn;
- q->merge_requests_fn = ll_merge_requests_fn;
q->prep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
q->queue_flags = (1 << QUEUE_FLAG_CLUSTER);
else
bio = bio_copy_user(q, uaddr, len, reading);
- if (IS_ERR(bio)) {
+ if (IS_ERR(bio))
return PTR_ERR(bio);
- }
orig_bio = bio;
blk_queue_bounce(q, &bio);
+
/*
* We link the bounce buffer in and could have to traverse it
* later so we have to get a ref to prevent it from being freed
*/
bio_get(bio);
- /*
- * for most (all? don't know of any) queues we could
- * skip grabbing the queue lock here. only drivers with
- * funky private ->back_merge_fn() function could be
- * problematic.
- */
- spin_lock_irq(q->queue_lock);
if (!rq->bio)
blk_rq_bio_prep(q, rq, bio);
- else if (!q->back_merge_fn(q, rq, bio)) {
+ else if (!ll_back_merge_fn(q, rq, bio)) {
ret = -EINVAL;
- spin_unlock_irq(q->queue_lock);
goto unmap_bio;
} else {
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->nr_sectors += bio_sectors(bio);
- rq->hard_nr_sectors = rq->nr_sectors;
rq->data_len += bio->bi_size;
}
- spin_unlock_irq(q->queue_lock);
return bio->bi_size;
unsigned long len)
{
unsigned long bytes_read = 0;
+ struct bio *bio = NULL;
int ret;
if (len > (q->max_hw_sectors << 9))
ret = __blk_rq_map_user(q, rq, ubuf, map_len);
if (ret < 0)
goto unmap_rq;
+ if (!bio)
+ bio = rq->bio;
bytes_read += ret;
ubuf += ret;
}
rq->buffer = rq->data = NULL;
return 0;
unmap_rq:
- blk_rq_unmap_user(rq);
+ blk_rq_unmap_user(bio);
return ret;
}
* @rq: request to map data to
* @iov: pointer to the iovec
* @iov_count: number of elements in the iovec
+ * @len: I/O byte count
*
* Description:
* Data will be mapped directly for zero copy io, if possible. Otherwise
/**
* blk_rq_unmap_user - unmap a request with user data
- * @rq: rq to be unmapped
+ * @bio: start of bio list
*
* Description:
- * Unmap a rq previously mapped by blk_rq_map_user().
- * rq->bio must be set to the original head of the request.
+ * Unmap a rq previously mapped by blk_rq_map_user(). The caller must
+ * supply the original rq->bio from the blk_rq_map_user() return, since
+ * the io completion may have changed rq->bio.
*/
-int blk_rq_unmap_user(struct request *rq)
+int blk_rq_unmap_user(struct bio *bio)
{
- struct bio *bio, *mapped_bio;
+ struct bio *mapped_bio;
+ int ret = 0, ret2;
- while ((bio = rq->bio)) {
- if (bio_flagged(bio, BIO_BOUNCED))
+ while (bio) {
+ mapped_bio = bio;
+ if (unlikely(bio_flagged(bio, BIO_BOUNCED)))
mapped_bio = bio->bi_private;
- else
- mapped_bio = bio;
- __blk_rq_unmap_user(mapped_bio);
- rq->bio = bio->bi_next;
- bio_put(bio);
+ ret2 = __blk_rq_unmap_user(mapped_bio);
+ if (ret2 && !ret)
+ ret = ret2;
+
+ mapped_bio = bio;
+ bio = bio->bi_next;
+ bio_put(mapped_bio);
}
- return 0;
+
+ return ret;
}
EXPORT_SYMBOL(blk_rq_unmap_user);
* will have updated segment counts, update sector
* counts here.
*/
- if (!q->merge_requests_fn(q, req, next))
+ if (!ll_merge_requests_fn(q, req, next))
return 0;
/*
case ELEVATOR_BACK_MERGE:
BUG_ON(!rq_mergeable(req));
- if (!q->back_merge_fn(q, req, bio))
+ if (!ll_back_merge_fn(q, req, bio))
break;
blk_add_trace_bio(q, bio, BLK_TA_BACKMERGE);
case ELEVATOR_FRONT_MERGE:
BUG_ON(!rq_mergeable(req));
- if (!q->front_merge_fn(q, req, bio))
+ if (!ll_front_merge_fn(q, req, bio))
break;
blk_add_trace_bio(q, bio, BLK_TA_FRONTMERGE);
static int sg_io(struct file *file, request_queue_t *q,
struct gendisk *bd_disk, struct sg_io_hdr *hdr)
{
- unsigned long start_time;
+ unsigned long start_time, timeout;
int writing = 0, ret = 0;
struct request *rq;
char sense[SCSI_SENSE_BUFFERSIZE];
rq->cmd_type = REQ_TYPE_BLOCK_PC;
- rq->timeout = jiffies_to_msecs(hdr->timeout);
+ timeout = msecs_to_jiffies(hdr->timeout);
+ rq->timeout = (timeout < INT_MAX) ? timeout : INT_MAX;
if (!rq->timeout)
rq->timeout = q->sg_timeout;
if (!rq->timeout)
hdr->sb_len_wr = len;
}
- rq->bio = bio;
- if (blk_rq_unmap_user(rq))
+ if (blk_rq_unmap_user(bio))
ret = -EFAULT;
/* may not have succeeded, but output values written to control
bool "ACPI Support"
depends on IA64 || X86
depends on PCI
- select PM
+ depends on PM
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
config ACPI_BUTTON
tristate "Button"
+ depends on INPUT
default y
help
This driver handles events on the power, sleep and lid buttons.
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for extra features of ACPI-compatible
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
static int acpi_ac_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_ac *ac = (struct acpi_ac *)seq->private;
+ struct acpi_ac *ac = seq->private;
if (!ac)
static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_ac *ac = (struct acpi_ac *)data;
+ struct acpi_ac *ac = data;
struct acpi_device *device = NULL;
if (!device)
return -EINVAL;
- ac = kmalloc(sizeof(struct acpi_ac), GFP_KERNEL);
+ ac = kzalloc(sizeof(struct acpi_ac), GFP_KERNEL);
if (!ac)
return -ENOMEM;
- memset(ac, 0, sizeof(struct acpi_ac));
ac->device = device;
strcpy(acpi_device_name(device), ACPI_AC_DEVICE_NAME);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- ac = (struct acpi_ac *)acpi_driver_data(device);
+ ac = acpi_driver_data(device);
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify);
if (!device)
return -EINVAL;
- mem_device = kmalloc(sizeof(struct acpi_memory_device), GFP_KERNEL);
+ mem_device = kzalloc(sizeof(struct acpi_memory_device), GFP_KERNEL);
if (!mem_device)
return -ENOMEM;
- memset(mem_device, 0, sizeof(struct acpi_memory_device));
INIT_LIST_HEAD(&mem_device->res_list);
mem_device->device = device;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- mem_device = (struct acpi_memory_device *)acpi_driver_data(device);
+ mem_device = acpi_driver_data(device);
kfree(mem_device);
return 0;
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
+static struct backlight_device *asus_backlight_device;
+
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
return rv;
}
-static int read_brightness(void)
+static int read_brightness(struct backlight_device *bd)
{
int value;
/*
* Change the brightness level
*/
-static void set_brightness(int value)
+static int set_brightness(int value)
{
acpi_status status = 0;
+ int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
value, NULL))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
- return;
+ ret = -EIO;
+ goto out;
}
/* No SPLV method if we are here, act as appropriate */
- value -= read_brightness();
+ value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
if (ACPI_FAILURE(status))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
+ ret = -EIO;
}
- return;
+out:
+ return ret;
+}
+
+static int set_brightness_status(struct backlight_device *bd)
+{
+ return set_brightness(bd->props->brightness);
}
static int
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
- return sprintf(page, "%d\n", read_brightness());
+ return sprintf(page, "%d\n", read_brightness(NULL));
}
static int
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Couldn't get the DSDT table header\n");
else
- asus_info = (struct acpi_table_header *)dsdt.pointer;
+ asus_info = dsdt.pointer;
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
* asus_model_match() and try something completely different.
*/
if (buffer.pointer) {
- model = (union acpi_object *)buffer.pointer;
+ model = buffer.pointer;
switch (model->type) {
case ACPI_TYPE_STRING:
string = model->string.pointer;
printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
ASUS_ACPI_VERSION);
- hotk =
- (struct asus_hotk *)kmalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+ hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
return -ENOMEM;
- memset(hotk, 0, sizeof(struct asus_hotk));
hotk->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
return 0;
}
+static struct backlight_properties asus_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = read_brightness,
+ .update_status = set_brightness_status,
+ .max_brightness = 15,
+};
+
+static void __exit asus_acpi_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ remove_proc_entry(PROC_ASUS, acpi_root_dir);
+
+ kfree(asus_info);
+
+ return;
+}
+
static int __init asus_acpi_init(void)
{
int result;
return result;
}
- return 0;
-}
-
-static void __exit asus_acpi_exit(void)
-{
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
- kfree(asus_info);
+ asus_backlight_device = backlight_device_register("asus",NULL,NULL,
+ &asus_backlight_data);
+ if (IS_ERR(asus_backlight_device)) {
+ printk(KERN_ERR "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ asus_acpi_exit();
+ }
- return;
+ return 0;
}
module_init(asus_acpi_init);
return -ENODEV;
}
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
/* Extract Package Data */
goto end;
}
- data.pointer = kmalloc(data.length, GFP_KERNEL);
+ data.pointer = kzalloc(data.length, GFP_KERNEL);
if (!data.pointer) {
result = -ENOMEM;
goto end;
}
- memset(data.pointer, 0, data.length);
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
kfree(buffer.pointer);
if (!result)
- (*bif) = (struct acpi_battery_info *)data.pointer;
+ (*bif) = data.pointer;
return result;
}
return -ENODEV;
}
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
/* Extract Package Data */
goto end;
}
- data.pointer = kmalloc(data.length, GFP_KERNEL);
+ data.pointer = kzalloc(data.length, GFP_KERNEL);
if (!data.pointer) {
result = -ENOMEM;
goto end;
}
- memset(data.pointer, 0, data.length);
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
kfree(buffer.pointer);
if (!result)
- (*bst) = (struct acpi_battery_status *)data.pointer;
+ (*bst) = data.pointer;
return result;
}
static int acpi_battery_read_info(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
struct acpi_battery_info *bif = NULL;
char *units = "?";
static int acpi_battery_read_state(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
struct acpi_battery_status *bst = NULL;
char *units = "?";
static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
char *units = "?";
{
int result = 0;
char alarm_string[12] = { '\0' };
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_battery *battery = (struct acpi_battery *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_battery *battery = m->private;
if (!battery || (count > sizeof(alarm_string) - 1))
static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_battery *battery = (struct acpi_battery *)data;
+ struct acpi_battery *battery = data;
struct acpi_device *device = NULL;
if (!device)
return -EINVAL;
- battery = kmalloc(sizeof(struct acpi_battery), GFP_KERNEL);
+ battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
if (!battery)
return -ENOMEM;
- memset(battery, 0, sizeof(struct acpi_battery));
battery->device = device;
strcpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- battery = (struct acpi_battery *)acpi_driver_data(device);
+ battery = acpi_driver_data(device);
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY,
case ACPI_IRQ_MODEL_IOSAPIC:
message = "IOSAPIC";
break;
+ case ACPI_IRQ_MODEL_PLATFORM:
+ message = "platform specific model";
+ break;
default:
printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n");
return -ENODEV;
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/input.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_BUTTON_COMPONENT
ACPI_MODULE_NAME("acpi_button")
- MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION(ACPI_BUTTON_DRIVER_NAME);
MODULE_LICENSE("GPL");
.ops = {
.add = acpi_button_add,
.remove = acpi_button_remove,
- },
+ },
};
struct acpi_button {
struct acpi_device *device; /* Fixed button kludge */
- u8 type;
+ unsigned int type;
+ struct input_dev *input;
+ char phys[32]; /* for input device */
unsigned long pushed;
};
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = (struct acpi_button *)seq->private;
-
+ struct acpi_button *button = seq->private;
if (!button || !button->device)
return 0;
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = (struct acpi_button *)seq->private;
+ struct acpi_button *button = seq->private;
acpi_status status;
unsigned long state;
-
if (!button || !button->device)
return 0;
status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
- if (ACPI_FAILURE(status)) {
- seq_printf(seq, "state: unsupported\n");
- } else {
- seq_printf(seq, "state: %s\n",
- (state ? "open" : "closed"));
- }
-
+ seq_printf(seq, "state: %s\n",
+ ACPI_FAILURE(status) ? "unsupported" :
+ (state ? "open" : "closed"));
return 0;
}
static int acpi_button_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button;
if (!device || !acpi_driver_data(device))
return -EINVAL;
static int acpi_button_remove_fs(struct acpi_device *device)
{
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button = acpi_driver_data(device);
- button = acpi_driver_data(device);
if (acpi_device_dir(device)) {
if (button->type == ACPI_BUTTON_TYPE_LID)
remove_proc_entry(ACPI_BUTTON_FILE_STATE,
static void acpi_button_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_button *button = (struct acpi_button *)data;
-
+ struct acpi_button *button = data;
+ struct input_dev *input;
if (!button || !button->device)
return;
switch (event) {
case ACPI_BUTTON_NOTIFY_STATUS:
+ input = button->input;
+
+ if (button->type == ACPI_BUTTON_TYPE_LID) {
+ struct acpi_handle *handle = button->device->handle;
+ unsigned long state;
+
+ if (!ACPI_FAILURE(acpi_evaluate_integer(handle, "_LID",
+ NULL, &state)))
+ input_report_switch(input, SW_LID, !state);
+
+ } else {
+ int keycode = test_bit(KEY_SLEEP, input->keybit) ?
+ KEY_SLEEP : KEY_POWER;
+
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ }
+ input_sync(input);
+
acpi_bus_generate_event(button->device, event,
++button->pushed);
break;
static acpi_status acpi_button_notify_fixed(void *data)
{
- struct acpi_button *button = (struct acpi_button *)data;
-
+ struct acpi_button *button = data;
if (!button)
return AE_BAD_PARAMETER;
return AE_OK;
}
-static int acpi_button_add(struct acpi_device *device)
+static int acpi_button_install_notify_handlers(struct acpi_button *button)
{
- int result = 0;
- acpi_status status = AE_OK;
- struct acpi_button *button = NULL;
+ acpi_status status;
+ switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWERF:
+ status =
+ acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
+ acpi_button_notify_fixed,
+ button);
+ break;
+ case ACPI_BUTTON_TYPE_SLEEPF:
+ status =
+ acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
+ acpi_button_notify_fixed,
+ button);
+ break;
+ default:
+ status = acpi_install_notify_handler(button->device->handle,
+ ACPI_DEVICE_NOTIFY,
+ acpi_button_notify,
+ button);
+ break;
+ }
+
+ return ACPI_FAILURE(status) ? -ENODEV : 0;
+}
+
+static void acpi_button_remove_notify_handlers(struct acpi_button *button)
+{
+ switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWERF:
+ acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
+ acpi_button_notify_fixed);
+ break;
+ case ACPI_BUTTON_TYPE_SLEEPF:
+ acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
+ acpi_button_notify_fixed);
+ break;
+ default:
+ acpi_remove_notify_handler(button->device->handle,
+ ACPI_DEVICE_NOTIFY,
+ acpi_button_notify);
+ break;
+ }
+}
+
+static int acpi_button_add(struct acpi_device *device)
+{
+ int error;
+ struct acpi_button *button;
+ struct input_dev *input;
if (!device)
return -EINVAL;
- button = kmalloc(sizeof(struct acpi_button), GFP_KERNEL);
+ button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- memset(button, 0, sizeof(struct acpi_button));
button->device = device;
acpi_driver_data(device) = button;
+ button->input = input = input_allocate_device();
+ if (!input) {
+ error = -ENOMEM;
+ goto err_free_button;
+ }
+
/*
* Determine the button type (via hid), as fixed-feature buttons
* need to be handled a bit differently than generic-space.
} else {
printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
acpi_device_hid(device));
- result = -ENODEV;
- goto end;
+ error = -ENODEV;
+ goto err_free_input;
}
- result = acpi_button_add_fs(device);
- if (result)
- goto end;
+ error = acpi_button_add_fs(device);
+ if (error)
+ goto err_free_input;
+
+ error = acpi_button_install_notify_handlers(button);
+ if (error)
+ goto err_remove_fs;
+
+ snprintf(button->phys, sizeof(button->phys),
+ "%s/button/input0", acpi_device_hid(device));
+
+ input->name = acpi_device_name(device);
+ input->phys = button->phys;
+ input->id.bustype = BUS_HOST;
+ input->id.product = button->type;
switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWER:
case ACPI_BUTTON_TYPE_POWERF:
- status =
- acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_button_notify_fixed,
- button);
+ input->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_POWER, input->keybit);
break;
+
+ case ACPI_BUTTON_TYPE_SLEEP:
case ACPI_BUTTON_TYPE_SLEEPF:
- status =
- acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_button_notify_fixed,
- button);
+ input->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_SLEEP, input->keybit);
break;
- default:
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_button_notify,
- button);
+
+ case ACPI_BUTTON_TYPE_LID:
+ input->evbit[0] = BIT(EV_SW);
+ set_bit(SW_LID, input->swbit);
break;
}
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ error = input_register_device(input);
+ if (error)
+ goto err_remove_handlers;
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
printk(KERN_INFO PREFIX "%s [%s]\n",
acpi_device_name(device), acpi_device_bid(device));
- end:
- if (result) {
- acpi_button_remove_fs(device);
- kfree(button);
- }
+ return 0;
- return result;
+ err_remove_handlers:
+ acpi_button_remove_notify_handlers(button);
+ err_remove_fs:
+ acpi_button_remove_fs(device);
+ err_free_input:
+ input_free_device(input);
+ err_free_button:
+ kfree(button);
+ return error;
}
static int acpi_button_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button;
if (!device || !acpi_driver_data(device))
return -EINVAL;
button = acpi_driver_data(device);
- /* Unregister for device notifications. */
- switch (button->type) {
- case ACPI_BUTTON_TYPE_POWERF:
- status =
- acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_button_notify_fixed);
- break;
- case ACPI_BUTTON_TYPE_SLEEPF:
- status =
- acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_button_notify_fixed);
- break;
- default:
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_button_notify);
- break;
- }
-
+ acpi_button_remove_notify_handlers(button);
acpi_button_remove_fs(device);
-
+ input_unregister_device(button->input);
kfree(button);
return 0;
static int __init acpi_button_init(void)
{
- int result = 0;
-
+ int result;
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
static void __exit acpi_button_exit(void)
{
-
acpi_bus_unregister_driver(&acpi_button_driver);
if (acpi_power_dir)
if (acpi_lid_dir)
remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
-
- return;
}
module_init(acpi_button_init);
return -EINVAL;
}
- container = kmalloc(sizeof(struct acpi_container), GFP_KERNEL);
+ container = kzalloc(sizeof(struct acpi_container), GFP_KERNEL);
if (!container)
return -ENOMEM;
- memset(container, 0, sizeof(struct acpi_container));
container->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_CONTAINER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_CONTAINER_CLASS);
acpi_status status = AE_OK;
struct acpi_container *pc = NULL;
- pc = (struct acpi_container *)acpi_driver_data(device);
+ pc = acpi_driver_data(device);
kfree(pc);
return status;
}
#include <linux/init.h>
#include <linux/types.h>
#include <linux/notifier.h>
+#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
MODULE_LICENSE("GPL");
static struct atomic_notifier_head dock_notifier_list;
+static struct platform_device dock_device;
+static char dock_device_name[] = "dock";
struct dock_station {
acpi_handle handle;
unsigned long last_dock_time;
u32 flags;
spinlock_t dd_lock;
- spinlock_t hp_lock;
+ struct mutex hp_lock;
struct list_head dependent_devices;
struct list_head hotplug_devices;
};
dock_add_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
{
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
list_add_tail(&dd->hotplug_list, &ds->hotplug_devices);
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
/**
dock_del_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
{
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
list_del(&dd->hotplug_list);
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
/**
{
struct dock_dependent_device *dd;
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
/*
* First call driver specific hotplug functions
else
dock_create_acpi_device(dd->handle);
}
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
static void dock_event(struct dock_station *ds, u32 event, int num)
{
+ struct device *dev = &dock_device.dev;
/*
- * we don't do events until someone tells me that
- * they would like to have them.
+ * Indicate that the status of the dock station has
+ * changed.
*/
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
/**
*/
int register_dock_notifier(struct notifier_block *nb)
{
+ if (!dock_station)
+ return -ENODEV;
+
return atomic_notifier_chain_register(&dock_notifier_list, nb);
}
*/
void unregister_dock_notifier(struct notifier_block *nb)
{
+ if (!dock_station)
+ return;
+
atomic_notifier_chain_unregister(&dock_notifier_list, nb);
}
EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
+/**
+ * handle_eject_request - handle an undock request checking for error conditions
+ *
+ * Check to make sure the dock device is still present, then undock and
+ * hotremove all the devices that may need removing.
+ */
+static int handle_eject_request(struct dock_station *ds, u32 event)
+{
+ if (!dock_present(ds))
+ return -ENODEV;
+
+ if (dock_in_progress(ds))
+ return -EBUSY;
+
+ /*
+ * here we need to generate the undock
+ * event prior to actually doing the undock
+ * so that the device struct still exists.
+ */
+ dock_event(ds, event, UNDOCK_EVENT);
+ hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
+ undock(ds);
+ eject_dock(ds);
+ if (dock_present(ds)) {
+ printk(KERN_ERR PREFIX "Unable to undock!\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
/**
* dock_notify - act upon an acpi dock notification
* @handle: the dock station handle
*
* If we are notified to dock, then check to see if the dock is
* present and then dock. Notify all drivers of the dock event,
- * and then hotplug and devices that may need hotplugging. For undock
- * check to make sure the dock device is still present, then undock
- * and hotremove all the devices that may need removing.
+ * and then hotplug and devices that may need hotplugging.
*/
static void dock_notify(acpi_handle handle, u32 event, void *data)
{
- struct dock_station *ds = (struct dock_station *)data;
+ struct dock_station *ds = data;
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
* to the driver who wish to hotplug.
*/
case ACPI_NOTIFY_EJECT_REQUEST:
- if (!dock_in_progress(ds) && dock_present(ds)) {
- /*
- * here we need to generate the undock
- * event prior to actually doing the undock
- * so that the device struct still exists.
- */
- dock_event(ds, event, UNDOCK_EVENT);
- hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
- undock(ds);
- eject_dock(ds);
- if (dock_present(ds))
- printk(KERN_ERR PREFIX "Unable to undock!\n");
- }
+ handle_eject_request(ds, event);
break;
default:
printk(KERN_ERR PREFIX "Unknown dock event %d\n", event);
{
acpi_status status;
acpi_handle tmp;
- struct dock_station *ds = (struct dock_station *)context;
+ struct dock_station *ds = context;
struct dock_dependent_device *dd;
status = acpi_bus_get_ejd(handle, &tmp);
return AE_OK;
}
+/*
+ * show_docked - read method for "docked" file in sysfs
+ */
+static ssize_t show_docked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station));
+
+}
+DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
+
+/*
+ * write_undock - write method for "undock" file in sysfs
+ */
+static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ if (!count)
+ return -EINVAL;
+
+ ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
+ return ret ? ret: count;
+}
+DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
+
/**
* dock_add - add a new dock station
* @handle: the dock station handle
INIT_LIST_HEAD(&dock_station->dependent_devices);
INIT_LIST_HEAD(&dock_station->hotplug_devices);
spin_lock_init(&dock_station->dd_lock);
- spin_lock_init(&dock_station->hp_lock);
+ mutex_init(&dock_station->hp_lock);
ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
+ /* initialize platform device stuff */
+ dock_device.name = dock_device_name;
+ ret = platform_device_register(&dock_device);
+ if (ret) {
+ printk(KERN_ERR PREFIX "Error %d registering dock device\n", ret);
+ kfree(dock_station);
+ return ret;
+ }
+ ret = device_create_file(&dock_device.dev, &dev_attr_docked);
+ if (ret) {
+ printk("Error %d adding sysfs file\n", ret);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
+ return ret;
+ }
+ ret = device_create_file(&dock_device.dev, &dev_attr_undock);
+ if (ret) {
+ printk("Error %d adding sysfs file\n", ret);
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
+ return ret;
+ }
+
/* Find dependent devices */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock_devices, dock_station,
dd = alloc_dock_dependent_device(handle);
if (!dd) {
kfree(dock_station);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto dock_add_err_unregister;
}
add_dock_dependent_device(dock_station, dd);
return 0;
dock_add_err:
- kfree(dock_station);
kfree(dd);
+dock_add_err_unregister:
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ device_remove_file(&dock_device.dev, &dev_attr_undock);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
return ret;
}
if (ACPI_FAILURE(status))
printk(KERN_ERR "Error removing notify handler\n");
+ /* cleanup sysfs */
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ device_remove_file(&dock_device.dev, &dev_attr_undock);
+ platform_device_unregister(&dock_device);
+
/* free dock station memory */
kfree(dock_station);
return 0;
static acpi_status
find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- int *count = (int *)context;
+ int *count = context;
acpi_status status = AE_OK;
if (is_dock(handle)) {
ACPI_UINT32_MAX, find_dock, &num, NULL);
if (!num)
- return -ENODEV;
+ printk(KERN_INFO "No dock devices found.\n");
return 0;
}
#define ACPI_EC_DRIVER_NAME "ACPI Embedded Controller Driver"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
-
+#undef PREFIX
+#define PREFIX "ACPI: EC: "
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
#define ACPI_EC_FLAG_BURST 0x10 /* burst mode */
#define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */
-
/* EC commands */
-#define ACPI_EC_COMMAND_READ 0x80
-#define ACPI_EC_COMMAND_WRITE 0x81
-#define ACPI_EC_BURST_ENABLE 0x82
-#define ACPI_EC_BURST_DISABLE 0x83
-#define ACPI_EC_COMMAND_QUERY 0x84
-
+enum ec_command {
+ ACPI_EC_COMMAND_READ = 0x80,
+ ACPI_EC_COMMAND_WRITE = 0x81,
+ ACPI_EC_BURST_ENABLE = 0x82,
+ ACPI_EC_BURST_DISABLE = 0x83,
+ ACPI_EC_COMMAND_QUERY = 0x84,
+};
/* EC events */
-enum {
+enum ec_event {
ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */
- ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
+ ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
};
-#define ACPI_EC_DELAY 50 /* Wait 50ms max. during EC ops */
+#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
-#define ACPI_EC_UDELAY 100 /* Poll @ 100us increments */
-#define ACPI_EC_UDELAY_COUNT 1000 /* Wait 10ms max. during EC ops */
-enum {
- EC_INTR = 1, /* Output buffer full */
- EC_POLL, /* Input buffer empty */
-};
+static enum ec_mode {
+ EC_INTR = 1, /* Output buffer full */
+ EC_POLL, /* Input buffer empty */
+} acpi_ec_mode = EC_INTR;
static int acpi_ec_remove(struct acpi_device *device, int type);
static int acpi_ec_start(struct acpi_device *device);
};
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
-struct acpi_ec {
+static struct acpi_ec {
acpi_handle handle;
unsigned long uid;
- unsigned long gpe_bit;
+ unsigned long gpe;
unsigned long command_addr;
unsigned long data_addr;
unsigned long global_lock;
- struct semaphore sem;
- unsigned int expect_event;
+ struct mutex lock;
+ atomic_t query_pending;
atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */
wait_queue_head_t wait;
} *ec_ecdt;
/* External interfaces use first EC only, so remember */
static struct acpi_device *first_ec;
-static int acpi_ec_mode = EC_INTR;
/* --------------------------------------------------------------------------
Transaction Management
outb(data, ec->data_addr);
}
-static int acpi_ec_check_status(u8 status, u8 event)
+static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
{
- switch (event) {
- case ACPI_EC_EVENT_OBF_1:
+ u8 status = acpi_ec_read_status(ec);
+
+ if (event == ACPI_EC_EVENT_OBF_1) {
if (status & ACPI_EC_FLAG_OBF)
return 1;
- break;
- case ACPI_EC_EVENT_IBF_0:
+ } else if (event == ACPI_EC_EVENT_IBF_0) {
if (!(status & ACPI_EC_FLAG_IBF))
return 1;
- break;
- default:
- break;
}
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, u8 event)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event)
{
- int i = (acpi_ec_mode == EC_POLL) ? ACPI_EC_UDELAY_COUNT : 0;
- long time_left;
-
- ec->expect_event = event;
- if (acpi_ec_check_status(acpi_ec_read_status(ec), event)) {
- ec->expect_event = 0;
- return 0;
- }
-
- do {
- if (acpi_ec_mode == EC_POLL) {
- udelay(ACPI_EC_UDELAY);
- } else {
- time_left = wait_event_timeout(ec->wait,
- !ec->expect_event,
- msecs_to_jiffies(ACPI_EC_DELAY));
- if (time_left > 0) {
- ec->expect_event = 0;
+ if (acpi_ec_mode == EC_POLL) {
+ unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
+ while (time_before(jiffies, delay)) {
+ if (acpi_ec_check_status(ec, event))
return 0;
- }
}
- if (acpi_ec_check_status(acpi_ec_read_status(ec), event)) {
- ec->expect_event = 0;
+ } else {
+ if (wait_event_timeout(ec->wait,
+ acpi_ec_check_status(ec, event),
+ msecs_to_jiffies(ACPI_EC_DELAY)) ||
+ acpi_ec_check_status(ec, event)) {
return 0;
+ } else {
+ printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+ " status = %d, expect_event = %d\n",
+ acpi_ec_read_status(ec), event);
}
- } while (--i > 0);
-
- ec->expect_event = 0;
+ }
return -ETIME;
}
u8 tmp = 0;
u8 status = 0;
-
status = acpi_ec_read_status(ec);
if (status != -EINVAL && !(status & ACPI_EC_FLAG_BURST)) {
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
atomic_set(&ec->leaving_burst, 0);
return 0;
- end:
+ end:
ACPI_EXCEPTION((AE_INFO, status, "EC wait, burst mode"));
return -1;
}
{
u8 status = 0;
-
status = acpi_ec_read_status(ec);
- if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)){
+ if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)) {
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- if(status)
+ if (status)
goto end;
acpi_ec_write_cmd(ec, ACPI_EC_BURST_DISABLE);
acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
}
atomic_set(&ec->leaving_burst, 1);
return 0;
- end:
+ end:
ACPI_EXCEPTION((AE_INFO, status, "EC leave burst mode"));
return -1;
}
-#endif /* ACPI_FUTURE_USAGE */
+#endif /* ACPI_FUTURE_USAGE */
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
- const u8 *wdata, unsigned wdata_len,
- u8 *rdata, unsigned rdata_len)
+ const u8 * wdata, unsigned wdata_len,
+ u8 * rdata, unsigned rdata_len)
{
- int result;
+ int result = 0;
acpi_ec_write_cmd(ec, command);
- for (; wdata_len > 0; wdata_len --) {
+ for (; wdata_len > 0; --wdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- if (result)
- return result;
+ if (result) {
+ printk(KERN_ERR PREFIX
+ "write_cmd timeout, command = %d\n", command);
+ goto end;
+ }
acpi_ec_write_data(ec, *(wdata++));
}
- if (command == ACPI_EC_COMMAND_WRITE) {
+ if (!rdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- if (result)
- return result;
+ if (result) {
+ printk(KERN_ERR PREFIX
+ "finish-write timeout, command = %d\n", command);
+ goto end;
+ }
+ } else if (command == ACPI_EC_COMMAND_QUERY) {
+ atomic_set(&ec->query_pending, 0);
}
- for (; rdata_len > 0; rdata_len --) {
+ for (; rdata_len > 0; --rdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1);
- if (result)
- return result;
+ if (result) {
+ printk(KERN_ERR PREFIX "read timeout, command = %d\n",
+ command);
+ goto end;
+ }
*(rdata++) = acpi_ec_read_data(ec);
}
-
- return 0;
+ end:
+ return result;
}
static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
- const u8 *wdata, unsigned wdata_len,
- u8 *rdata, unsigned rdata_len)
+ const u8 * wdata, unsigned wdata_len,
+ u8 * rdata, unsigned rdata_len)
{
int status;
u32 glk;
if (!ec || (wdata_len && !wdata) || (rdata_len && !rdata))
return -EINVAL;
- if (rdata)
- memset(rdata, 0, rdata_len);
+ if (rdata)
+ memset(rdata, 0, rdata_len);
+ mutex_lock(&ec->lock);
if (ec->global_lock) {
status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
if (ACPI_FAILURE(status))
return -ENODEV;
}
- down(&ec->sem);
+
+ /* Make sure GPE is enabled before doing transaction */
+ acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
if (status) {
- printk(KERN_DEBUG PREFIX "read EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX
+ "input buffer is not empty, aborting transaction\n");
goto end;
}
- status = acpi_ec_transaction_unlocked(ec, command,
- wdata, wdata_len,
- rdata, rdata_len);
+ status = acpi_ec_transaction_unlocked(ec, command,
+ wdata, wdata_len,
+ rdata, rdata_len);
-end:
- up(&ec->sem);
+ end:
if (ec->global_lock)
acpi_release_global_lock(glk);
+ mutex_unlock(&ec->lock);
return status;
}
-static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data)
+static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
{
int result;
u8 d;
static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
{
- u8 wdata[2] = { address, data };
- return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE,
+ u8 wdata[2] = { address, data };
+ return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE,
wdata, 2, NULL, 0);
}
/*
* Externally callable EC access functions. For now, assume 1 EC only
*/
-int ec_read(u8 addr, u8 *val)
+int ec_read(u8 addr, u8 * val)
{
struct acpi_ec *ec;
int err;
EXPORT_SYMBOL(ec_write);
-extern int ec_transaction(u8 command,
- const u8 *wdata, unsigned wdata_len,
- u8 *rdata, unsigned rdata_len)
+int ec_transaction(u8 command,
+ const u8 * wdata, unsigned wdata_len,
+ u8 * rdata, unsigned rdata_len)
{
struct acpi_ec *ec;
EXPORT_SYMBOL(ec_transaction);
-static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
+static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
{
int result;
- u8 d;
+ u8 d;
- if (!ec || !data)
- return -EINVAL;
+ if (!ec || !data)
+ return -EINVAL;
- /*
- * Query the EC to find out which _Qxx method we need to evaluate.
- * Note that successful completion of the query causes the ACPI_EC_SCI
- * bit to be cleared (and thus clearing the interrupt source).
- */
+ /*
+ * Query the EC to find out which _Qxx method we need to evaluate.
+ * Note that successful completion of the query causes the ACPI_EC_SCI
+ * bit to be cleared (and thus clearing the interrupt source).
+ */
- result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1);
- if (result)
- return result;
+ result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1);
+ if (result)
+ return result;
- if (!d)
- return -ENODATA;
+ if (!d)
+ return -ENODATA;
- *data = d;
- return 0;
+ *data = d;
+ return 0;
}
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
-struct acpi_ec_query_data {
- acpi_handle handle;
- u8 data;
-};
-
static void acpi_ec_gpe_query(void *ec_cxt)
{
struct acpi_ec *ec = (struct acpi_ec *)ec_cxt;
u8 value = 0;
- static char object_name[8];
+ char object_name[8];
- if (!ec)
- goto end;
-
- value = acpi_ec_read_status(ec);
-
- if (!(value & ACPI_EC_FLAG_SCI))
- goto end;
-
- if (acpi_ec_query(ec, &value))
- goto end;
+ if (!ec || acpi_ec_query(ec, &value))
+ return;
snprintf(object_name, 8, "_Q%2.2X", value);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s", object_name));
acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
-
- end:
- acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
}
static u32 acpi_ec_gpe_handler(void *data)
u8 value;
struct acpi_ec *ec = (struct acpi_ec *)data;
- acpi_clear_gpe(NULL, ec->gpe_bit, ACPI_ISR);
- value = acpi_ec_read_status(ec);
-
if (acpi_ec_mode == EC_INTR) {
- if (acpi_ec_check_status(value, ec->expect_event)) {
- ec->expect_event = 0;
- wake_up(&ec->wait);
- }
+ wake_up(&ec->wait);
}
- if (value & ACPI_EC_FLAG_SCI) {
- status = acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
- return status == AE_OK ?
- ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
+ value = acpi_ec_read_status(ec);
+ if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
+ atomic_set(&ec->query_pending, 1);
+ status =
+ acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query,
+ ec);
}
- acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+
return status == AE_OK ?
ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
}
acpi_integer f_v = 0;
int i = 0;
-
if ((address > 0xFF) || !value || !handler_context)
return AE_BAD_PARAMETER;
switch (function) {
case ACPI_READ:
temp = 0;
- result = acpi_ec_read(ec, (u8) address, (u8 *) &temp);
+ result = acpi_ec_read(ec, (u8) address, (u8 *) & temp);
break;
case ACPI_WRITE:
result = acpi_ec_write(ec, (u8) address, (u8) temp);
{
struct acpi_ec *ec = (struct acpi_ec *)seq->private;
-
if (!ec)
goto end;
- seq_printf(seq, "gpe bit: 0x%02x\n",
- (u32) ec->gpe_bit);
+ seq_printf(seq, "gpe: 0x%02x\n", (u32) ec->gpe);
seq_printf(seq, "ports: 0x%02x, 0x%02x\n",
- (u32) ec->command_addr,
- (u32) ec->data_addr);
+ (u32) ec->command_addr, (u32) ec->data_addr);
seq_printf(seq, "use global lock: %s\n",
ec->global_lock ? "yes" : "no");
- acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+ acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
end:
return 0;
{
struct proc_dir_entry *entry = NULL;
-
if (!acpi_device_dir(device)) {
acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
acpi_ec_dir);
acpi_status status = AE_OK;
struct acpi_ec *ec = NULL;
-
if (!device)
return -EINVAL;
- ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec)
return -ENOMEM;
- memset(ec, 0, sizeof(struct acpi_ec));
ec->handle = device->handle;
ec->uid = -1;
- init_MUTEX(&ec->sem);
+ mutex_init(&ec->lock);
+ atomic_set(&ec->query_pending, 0);
if (acpi_ec_mode == EC_INTR) {
atomic_set(&ec->leaving_burst, 1);
init_waitqueue_head(&ec->wait);
acpi_driver_data(device) = ec;
/* Use the global lock for all EC transactions? */
- acpi_evaluate_integer(ec->handle, "_GLK", NULL,
- &ec->global_lock);
+ acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
/* XXX we don't test uids, because on some boxes ecdt uid = 0, see:
http://bugzilla.kernel.org/show_bug.cgi?id=6111 */
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler);
- acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit,
+ acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
&acpi_ec_gpe_handler);
kfree(ec_ecdt);
/* Get GPE bit assignment (EC events). */
/* TODO: Add support for _GPE returning a package */
- status =
- acpi_evaluate_integer(ec->handle, "_GPE", NULL,
- &ec->gpe_bit);
+ status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Obtaining GPE bit assignment"));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Obtaining GPE bit assignment"));
result = -ENODEV;
goto end;
}
goto end;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
- acpi_device_name(device), acpi_device_bid(device),
- (u32) ec->gpe_bit));
+ acpi_device_name(device), acpi_device_bid(device),
+ (u32) ec->gpe));
if (!first_ec)
first_ec = device;
- end:
+ end:
if (result)
kfree(ec);
{
struct acpi_ec *ec = NULL;
-
if (!device)
return -EINVAL;
acpi_status status = AE_OK;
struct acpi_ec *ec = NULL;
-
if (!device)
return -EINVAL;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
- ec->gpe_bit, ec->command_addr, ec->data_addr));
+ ec->gpe, ec->command_addr, ec->data_addr));
/*
* Install GPE handler
*/
- status = acpi_install_gpe_handler(NULL, ec->gpe_bit,
+ status = acpi_install_gpe_handler(NULL, ec->gpe,
ACPI_GPE_EDGE_TRIGGERED,
&acpi_ec_gpe_handler, ec);
if (ACPI_FAILURE(status)) {
return -ENODEV;
}
- acpi_set_gpe_type(NULL, ec->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+ acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+ acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
status = acpi_install_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler,
&acpi_ec_space_setup, ec);
if (ACPI_FAILURE(status)) {
- acpi_remove_gpe_handler(NULL, ec->gpe_bit,
- &acpi_ec_gpe_handler);
+ acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler);
return -ENODEV;
}
acpi_status status = AE_OK;
struct acpi_ec *ec = NULL;
-
if (!device)
return -EINVAL;
if (ACPI_FAILURE(status))
return -ENODEV;
- status =
- acpi_remove_gpe_handler(NULL, ec->gpe_bit,
- &acpi_ec_gpe_handler);
+ status = acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler);
if (ACPI_FAILURE(status))
return -ENODEV;
{
acpi_status status;
- init_MUTEX(&ec_ecdt->sem);
+ mutex_init(&ec_ecdt->lock);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
ec_ecdt->uid = -1;
acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
- status =
- acpi_evaluate_integer(handle, "_GPE", NULL,
- &ec_ecdt->gpe_bit);
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe);
if (ACPI_FAILURE(status))
return status;
ec_ecdt->global_lock = TRUE;
ec_ecdt->handle = handle;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
- ec_ecdt->gpe_bit, ec_ecdt->command_addr, ec_ecdt->data_addr));
+ ec_ecdt->gpe, ec_ecdt->command_addr,
+ ec_ecdt->data_addr));
return AE_CTRL_TERMINATE;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Try to make an fake ECDT"));
- ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec_ecdt) {
ret = -ENOMEM;
goto error;
}
- memset(ec_ecdt, 0, sizeof(struct acpi_ec));
status = acpi_get_devices(ACPI_EC_HID,
acpi_fake_ecdt_callback, NULL, NULL);
goto error;
}
return 0;
- error:
+ error:
return ret;
}
/*
* Generate a temporary ec context to use until the namespace is scanned
*/
- ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec_ecdt)
return -ENOMEM;
- memset(ec_ecdt, 0, sizeof(struct acpi_ec));
- init_MUTEX(&ec_ecdt->sem);
+ mutex_init(&ec_ecdt->lock);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
ec_ecdt->command_addr = ecdt_ptr->ec_control.address;
ec_ecdt->data_addr = ecdt_ptr->ec_data.address;
- ec_ecdt->gpe_bit = ecdt_ptr->gpe_bit;
+ ec_ecdt->gpe = ecdt_ptr->gpe_bit;
/* use the GL just to be safe */
ec_ecdt->global_lock = TRUE;
ec_ecdt->uid = ecdt_ptr->uid;
- status =
- acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+ status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
if (ACPI_FAILURE(status)) {
goto error;
}
return 0;
- error:
+ error:
ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT"));
kfree(ec_ecdt);
ec_ecdt = NULL;
/*
* Install GPE handler
*/
- status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit,
+ status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe,
ACPI_GPE_EDGE_TRIGGERED,
&acpi_ec_gpe_handler, ec_ecdt);
if (ACPI_FAILURE(status)) {
goto error;
}
- acpi_set_gpe_type(NULL, ec_ecdt->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec_ecdt->gpe_bit, ACPI_NOT_ISR);
+ acpi_set_gpe_type(NULL, ec_ecdt->gpe, ACPI_GPE_TYPE_RUNTIME);
+ acpi_enable_gpe(NULL, ec_ecdt->gpe, ACPI_NOT_ISR);
status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_setup,
ec_ecdt);
if (ACPI_FAILURE(status)) {
- acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit,
+ acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
&acpi_ec_gpe_handler);
goto error;
}
{
int result = 0;
-
if (acpi_disabled)
return 0;
acpi_ec_mode = EC_POLL;
}
acpi_ec_driver.ops.add = acpi_ec_add;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "EC %s mode.\n", intr ? "interrupt" : "polling"));
+ printk(KERN_NOTICE PREFIX "%s mode.\n",
+ intr ? "interrupt" : "polling");
return 1;
}
static u32 acpi_ev_global_lock_handler(void *context)
{
u8 acquired = FALSE;
- acpi_status status;
/*
* Attempt to get the lock
walk_state->thread->thread_id)
&& (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
ACPI_ERROR((AE_INFO,
- "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
- (u32) walk_state->thread->thread_id,
+ "Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
+ (unsigned long)walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- (u32) obj_desc->mutex.owner_thread->thread_id));
+ (unsigned long)obj_desc->mutex.owner_thread->thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
size_t count, loff_t * ppos)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_fan *fan = (struct acpi_fan *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_fan *fan = m->private;
char state_string[12] = { '\0' };
if (!device)
return -EINVAL;
- fan = kmalloc(sizeof(struct acpi_fan), GFP_KERNEL);
+ fan = kzalloc(sizeof(struct acpi_fan), GFP_KERNEL);
if (!fan)
return -ENOMEM;
- memset(fan, 0, sizeof(struct acpi_fan));
fan->device = device;
strcpy(acpi_device_name(device), "Fan");
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fan = (struct acpi_fan *)acpi_driver_data(device);
+ fan = acpi_driver_data(device);
acpi_fan_remove_fs(device);
static acpi_status
do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
- unsigned long *busnr = (unsigned long *)data;
+ unsigned long *busnr = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
bus = tmp;
if (seg == find->seg && bus == find->bus)
+ {
find->handle = handle;
- status = AE_OK;
+ status = AE_CTRL_TERMINATE;
+ }
+ else
+ status = AE_OK;
exit:
kfree(buffer.pointer);
return status;
acpi_status status;
struct acpi_device_info *info;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_find_child *find = (struct acpi_find_child *)context;
+ struct acpi_find_child *find = context;
status = acpi_get_object_info(handle, &buffer);
if (ACPI_SUCCESS(status)) {
static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_polling_hotkey *poll_hotkey =
- (struct acpi_polling_hotkey *)seq->private;
+ struct acpi_polling_hotkey *poll_hotkey = seq->private;
char *buf;
if (ACPI_FAILURE(status))
goto do_fail_zero;
key->poll_hotkey.poll_result =
- (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ kmalloc(sizeof(union acpi_object), GFP_KERNEL);
if (!key->poll_hotkey.poll_result)
goto do_fail_zero;
return AE_OK;
return -EINVAL;
}
- ec_hc = kmalloc(sizeof(struct acpi_ec_hc), GFP_KERNEL);
+ ec_hc = kzalloc(sizeof(struct acpi_ec_hc), GFP_KERNEL);
if (!ec_hc) {
return -ENOMEM;
}
- memset(ec_hc, 0, sizeof(struct acpi_ec_hc));
- smbus = kmalloc(sizeof(struct acpi_ec_smbus), GFP_KERNEL);
+ smbus = kzalloc(sizeof(struct acpi_ec_smbus), GFP_KERNEL);
if (!smbus) {
kfree(ec_hc);
return -ENOMEM;
}
- memset(smbus, 0, sizeof(struct acpi_ec_smbus));
ec_hc->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_EC_HC_DEVICE_NAME);
struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device)
{
- return ((struct acpi_ec_hc *)acpi_driver_data(device->parent));
+ return acpi_driver_data(device->parent);
}
EXPORT_SYMBOL(acpi_get_ec_hc);
*
*
* Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define IBM_VERSION "0.12a"
+#define IBM_VERSION "0.13"
/*
* Changelog:
+ *
+ * 2006-11-22 0.13 new maintainer
+ * changelog now lives in git commit history, and will
+ * not be updated further in-file.
*
* 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
* 2005-03-17 0.11 support for 600e, 770x
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/string.h>
+
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <asm/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+
#include <acpi/acpi_drivers.h>
#include <acpi/acnamesp.h>
#define IBM_FILE "ibm_acpi"
#define IBM_URL "http://ibm-acpi.sf.net/"
-MODULE_AUTHOR("Borislav Deianov");
+MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
MODULE_DESCRIPTION(IBM_DESC);
MODULE_VERSION(IBM_VERSION);
MODULE_LICENSE("GPL");
static char *object##_path; \
static char *object##_paths[] = { paths }
-/*
- * The following models are supported to various degrees:
- *
- * 570, 600e, 600x, 770e, 770x
- * A20m, A21e, A21m, A21p, A22p, A30, A30p, A31, A31p
- * G40, G41
- * R30, R31, R32, R40, R40e, R50, R50e, R50p, R51
- * T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, T43
- * X20, X21, X22, X23, X24, X30, X31, X40
- *
- * The following models have no supported features:
- *
- * 240, 240x, i1400
- *
- * Still missing DSDTs for the following models:
- *
- * A20p, A22e, A22m
- * R52
- * S31
- * T43p
- */
-
IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
"\\_SB.PCI.ISA.EC", /* 570 */
"\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
#endif
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
+ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
"\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
); /* A21e, R30, R31 */
IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
-IBM_HANDLE(fans, ec, "FANS"); /* X31, X40 */
+IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */
IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
"\\FSPD", /* 600e/x, 770e, 770x */
#define IBM_HKEY_HID "IBM0068"
#define IBM_PCI_HID "PNP0A03"
+enum thermal_access_mode {
+ IBMACPI_THERMAL_NONE = 0, /* No thermal support */
+ IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
+ IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
+ IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
+ IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
+};
+
+#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
+struct ibm_thermal_sensors_struct {
+ s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
+};
+
+/*
+ * FAN ACCESS MODES
+ *
+ * IBMACPI_FAN_RD_ACPI_GFAN:
+ * ACPI GFAN method: returns fan level
+ *
+ * see IBMACPI_FAN_WR_ACPI_SFAN
+ * EC 0x2f not available if GFAN exists
+ *
+ * IBMACPI_FAN_WR_ACPI_SFAN:
+ * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
+ *
+ * EC 0x2f might be available *for reading*, but never for writing.
+ *
+ * IBMACPI_FAN_WR_TPEC:
+ * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
+ * on almost all ThinkPads
+ *
+ * Fan speed changes of any sort (including those caused by the
+ * disengaged mode) are usually done slowly by the firmware as the
+ * maximum ammount of fan duty cycle change per second seems to be
+ * limited.
+ *
+ * Reading is not available if GFAN exists.
+ * Writing is not available if SFAN exists.
+ *
+ * Bits
+ * 7 automatic mode engaged;
+ * (default operation mode of the ThinkPad)
+ * fan level is ignored in this mode.
+ * 6 disengage mode (takes precedence over bit 7);
+ * not available on all thinkpads. May disable
+ * the tachometer, and speeds up fan to 100% duty-cycle,
+ * which speeds it up far above the standard RPM
+ * levels. It is not impossible that it could cause
+ * hardware damage.
+ * 5-3 unused in some models. Extra bits for fan level
+ * in others, but still useless as all values above
+ * 7 map to the same speed as level 7 in these models.
+ * 2-0 fan level (0..7 usually)
+ * 0x00 = stop
+ * 0x07 = max (set when temperatures critical)
+ * Some ThinkPads may have other levels, see
+ * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
+ *
+ * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
+ * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ * does so, its initial value is meaningless (0x07).
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * ----
+ *
+ * ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
+ * Main fan tachometer reading (in RPM)
+ *
+ * This register is present on all ThinkPads with a new-style EC, and
+ * it is known not to be present on the A21m/e, and T22, as there is
+ * something else in offset 0x84 according to the ACPI DSDT. Other
+ * ThinkPads from this same time period (and earlier) probably lack the
+ * tachometer as well.
+ *
+ * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ * was never fixed by IBM to report the EC firmware version string
+ * probably support the tachometer (like the early X models), so
+ * detecting it is quite hard. We need more data to know for sure.
+ *
+ * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
+ * might result.
+ *
+ * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
+ * register is not invalidated in ThinkPads that disable tachometer
+ * readings. Thus, the tachometer readings go stale.
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * IBMACPI_FAN_WR_ACPI_FANS:
+ * ThinkPad X31, X40, X41. Not available in the X60.
+ *
+ * FANS ACPI handle: takes three arguments: low speed, medium speed,
+ * high speed. ACPI DSDT seems to map these three speeds to levels
+ * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
+ * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
+ *
+ * The speeds are stored on handles
+ * (FANA:FAN9), (FANC:FANB), (FANE:FAND).
+ *
+ * There are three default speed sets, acessible as handles:
+ * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
+ *
+ * ACPI DSDT switches which set is in use depending on various
+ * factors.
+ *
+ * IBMACPI_FAN_WR_TPEC is also available and should be used to
+ * command the fan. The X31/X40/X41 seems to have 8 fan levels,
+ * but the ACPI tables just mention level 7.
+ */
+
+enum fan_status_access_mode {
+ IBMACPI_FAN_NONE = 0, /* No fan status or control */
+ IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
+ IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
+};
+
+enum fan_control_access_mode {
+ IBMACPI_FAN_WR_NONE = 0, /* No fan control */
+ IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
+ IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
+ IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
+};
+
+enum fan_control_commands {
+ IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
+ IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
+ IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
+ * and also watchdog cmd */
+};
+
+enum { /* Fan control constants */
+ fan_status_offset = 0x2f, /* EC register 0x2f */
+ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
+ * 0x84 must be read before 0x85 */
+
+ IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer
+ * disengaged */
+ IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan
+ * control */
+};
+
+static char *ibm_thinkpad_ec_found = NULL;
+
struct ibm_struct {
char *name;
char param[32];
static struct proc_dir_entry *proc_dir = NULL;
+static struct backlight_device *ibm_backlight_device = NULL;
+
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
return start;
}
-static int driver_init(void)
+static int ibm_acpi_driver_init(void)
{
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
printk(IBM_INFO "%s\n", IBM_URL);
{
int status;
- if (!wan_supported ||
- !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+ if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
status = 0;
return status;
return 0;
}
-static int video_supported;
-static int video_orig_autosw;
+enum video_access_mode {
+ IBMACPI_VIDEO_NONE = 0,
+ IBMACPI_VIDEO_570, /* 570 */
+ IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */
+ IBMACPI_VIDEO_NEW, /* all others */
+};
-#define VIDEO_570 1
-#define VIDEO_770 2
-#define VIDEO_NEW 3
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
static int video_init(void)
{
if (!vid_handle)
/* video switching not supported on R30, R31 */
- video_supported = 0;
+ video_supported = IBMACPI_VIDEO_NONE;
else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
/* 570 */
- video_supported = VIDEO_570;
+ video_supported = IBMACPI_VIDEO_570;
else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
/* 600e/x, 770e, 770x */
- video_supported = VIDEO_770;
+ video_supported = IBMACPI_VIDEO_770;
else
/* all others */
- video_supported = VIDEO_NEW;
+ video_supported = IBMACPI_VIDEO_NEW;
return 0;
}
int status = 0;
int i;
- if (video_supported == VIDEO_570) {
+ if (video_supported == IBMACPI_VIDEO_570) {
if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
status = i & 3;
- } else if (video_supported == VIDEO_770) {
+ } else if (video_supported == IBMACPI_VIDEO_770) {
if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
status |= 0x01 * i;
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
status |= 0x02 * i;
- } else if (video_supported == VIDEO_NEW) {
+ } else if (video_supported == IBMACPI_VIDEO_NEW) {
acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
status |= 0x02 * i;
{
int autosw = 0;
- if (video_supported == VIDEO_570)
+ if (video_supported == IBMACPI_VIDEO_570)
acpi_evalf(vid_handle, &autosw, "SWIT", "d");
- else if (video_supported == VIDEO_770 || video_supported == VIDEO_NEW)
+ else if (video_supported == IBMACPI_VIDEO_770 ||
+ video_supported == IBMACPI_VIDEO_NEW)
acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
return autosw & 1;
len += sprintf(p + len, "status:\t\tsupported\n");
len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
- if (video_supported == VIDEO_NEW)
+ if (video_supported == IBMACPI_VIDEO_NEW)
len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
- if (video_supported == VIDEO_NEW)
+ if (video_supported == IBMACPI_VIDEO_NEW)
len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
return -EIO;
- ret = video_supported == VIDEO_570 ?
+ ret = video_supported == IBMACPI_VIDEO_570 ?
acpi_evalf(ec_handle, NULL, "_Q16", "v") :
acpi_evalf(vid_handle, NULL, "VSWT", "v");
acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
static int video_expand(void)
{
- if (video_supported == VIDEO_570)
+ if (video_supported == IBMACPI_VIDEO_570)
return acpi_evalf(ec_handle, NULL, "_Q17", "v");
- else if (video_supported == VIDEO_770)
+ else if (video_supported == IBMACPI_VIDEO_770)
return acpi_evalf(vid_handle, NULL, "VEXP", "v");
else
return acpi_evalf(NULL, NULL, "\\VEXP", "v");
{
int ret;
- if (video_supported == VIDEO_570) {
+ if (video_supported == IBMACPI_VIDEO_570) {
ret = acpi_evalf(NULL, NULL,
"\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
- } else if (video_supported == VIDEO_770) {
+ } else if (video_supported == IBMACPI_VIDEO_770) {
int autosw = video_autosw();
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
return -EIO;
enable |= 0x02;
} else if (strlencmp(cmd, "crt_disable") == 0) {
disable |= 0x02;
- } else if (video_supported == VIDEO_NEW &&
+ } else if (video_supported == IBMACPI_VIDEO_NEW &&
strlencmp(cmd, "dvi_enable") == 0) {
enable |= 0x08;
- } else if (video_supported == VIDEO_NEW &&
+ } else if (video_supported == IBMACPI_VIDEO_NEW &&
strlencmp(cmd, "dvi_disable") == 0) {
disable |= 0x08;
} else if (strlencmp(cmd, "auto_enable") == 0) {
return status;
}
+
#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
return 0;
}
-static int led_supported;
-
-#define LED_570 1
-#define LED_OLD 2
-#define LED_NEW 3
+enum led_access_mode {
+ IBMACPI_LED_NONE = 0,
+ IBMACPI_LED_570, /* 570 */
+ IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+ IBMACPI_LED_NEW, /* all others */
+};
+static enum led_access_mode led_supported;
static int led_init(void)
{
if (!led_handle)
/* led not supported on R30, R31 */
- led_supported = 0;
+ led_supported = IBMACPI_LED_NONE;
else if (strlencmp(led_path, "SLED") == 0)
/* 570 */
- led_supported = LED_570;
+ led_supported = IBMACPI_LED_570;
else if (strlencmp(led_path, "SYSL") == 0)
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- led_supported = LED_OLD;
+ led_supported = IBMACPI_LED_OLD;
else
/* all others */
- led_supported = LED_NEW;
+ led_supported = IBMACPI_LED_NEW;
return 0;
}
}
len += sprintf(p + len, "status:\t\tsupported\n");
- if (led_supported == LED_570) {
+ if (led_supported == IBMACPI_LED_570) {
/* 570 */
int i, status;
for (i = 0; i < 8; i++) {
} else
return -EINVAL;
- if (led_supported == LED_570) {
+ if (led_supported == IBMACPI_LED_570) {
/* 570 */
led = 1 << led;
if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
led, led_sled_arg1[ind]))
return -EIO;
- } else if (led_supported == LED_OLD) {
+ } else if (led_supported == IBMACPI_LED_OLD) {
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
led = 1 << led;
ret = ec_write(EC_HLMS, led);
return 1;
}
-static int thermal_tmp_supported;
-static int thermal_updt_supported;
+static enum thermal_access_mode thermal_read_mode;
static int thermal_init(void)
{
- /* temperatures not supported on 570, G4x, R30, R31, R32 */
- thermal_tmp_supported = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+ u8 t, ta1, ta2;
+ int i;
+ int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+ if (ibm_thinkpad_ec_found && experimental) {
+ /*
+ * Direct EC access mode: sensors at registers
+ * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
+ * non-implemented, thermal sensors return 0x80 when
+ * not available
+ */
- /* 600e/x, 770e, 770x */
- thermal_updt_supported = acpi_evalf(ec_handle, NULL, "UPDT", "qv");
+ ta1 = ta2 = 0;
+ for (i = 0; i < 8; i++) {
+ if (likely(acpi_ec_read(0x78 + i, &t))) {
+ ta1 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ if (likely(acpi_ec_read(0xC0 + i, &t))) {
+ ta2 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ }
+ if (ta1 == 0) {
+ /* This is sheer paranoia, but we handle it anyway */
+ if (acpi_tmp7) {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "falling back to ACPI TMPx access mode\n");
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "disabling thermal sensors access\n");
+ thermal_read_mode = IBMACPI_THERMAL_NONE;
+ }
+ } else {
+ thermal_read_mode =
+ (ta2 != 0) ?
+ IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
+ }
+ } else if (acpi_tmp7) {
+ if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
+ /* 600e/x, 770e, 770x */
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
+ } else {
+ /* Standard ACPI TMPx access, max 8 sensors */
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
+ }
+ } else {
+ /* temperatures not supported on 570, G4x, R30, R31, R32 */
+ thermal_read_mode = IBMACPI_THERMAL_NONE;
+ }
return 0;
}
-static int thermal_read(char *p)
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
{
- int len = 0;
+ int i, t;
+ s8 tmp;
+ char tmpi[] = "TMPi";
- if (!thermal_tmp_supported)
- len += sprintf(p + len, "temperatures:\tnot supported\n");
- else {
- int i, t;
- char tmpi[] = "TMPi";
- s8 tmp[8];
+ if (!s)
+ return -EINVAL;
- if (thermal_updt_supported)
- if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+ switch (thermal_read_mode) {
+#if IBMACPI_MAX_THERMAL_SENSORS >= 16
+ case IBMACPI_THERMAL_TPEC_16:
+ for (i = 0; i < 8; i++) {
+ if (!acpi_ec_read(0xC0 + i, &tmp))
+ return -EIO;
+ s->temp[i + 8] = tmp * 1000;
+ }
+ /* fallthrough */
+#endif
+ case IBMACPI_THERMAL_TPEC_8:
+ for (i = 0; i < 8; i++) {
+ if (!acpi_ec_read(0x78 + i, &tmp))
return -EIO;
+ s->temp[i] = tmp * 1000;
+ }
+ return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
+ case IBMACPI_THERMAL_ACPI_UPDT:
+ if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+ return -EIO;
for (i = 0; i < 8; i++) {
tmpi[3] = '0' + i;
if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
return -EIO;
- if (thermal_updt_supported)
- tmp[i] = (t - 2732 + 5) / 10;
- else
- tmp[i] = t;
+ s->temp[i] = (t - 2732) * 100;
}
+ return 8;
- len += sprintf(p + len,
- "temperatures:\t%d %d %d %d %d %d %d %d\n",
- tmp[0], tmp[1], tmp[2], tmp[3],
- tmp[4], tmp[5], tmp[6], tmp[7]);
+ case IBMACPI_THERMAL_ACPI_TMP07:
+ for (i = 0; i < 8; i++) {
+ tmpi[3] = '0' + i;
+ if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+ return -EIO;
+ s->temp[i] = t * 1000;
+ }
+ return 8;
+
+ case IBMACPI_THERMAL_NONE:
+ default:
+ return 0;
}
+}
+
+static int thermal_read(char *p)
+{
+ int len = 0;
+ int n, i;
+ struct ibm_thermal_sensors_struct t;
+
+ n = thermal_get_sensors(&t);
+ if (unlikely(n < 0))
+ return n;
+
+ len += sprintf(p + len, "temperatures:\t");
+
+ if (n > 0) {
+ for (i = 0; i < (n - 1); i++)
+ len += sprintf(p + len, "%d ", t.temp[i] / 1000);
+ len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+ } else
+ len += sprintf(p + len, "not supported\n");
return len;
}
static int brightness_offset = 0x31;
+static int brightness_get(struct backlight_device *bd)
+{
+ u8 level;
+ if (!acpi_ec_read(brightness_offset, &level))
+ return -EIO;
+
+ level &= 0x7;
+
+ return level;
+}
+
static int brightness_read(char *p)
{
int len = 0;
- u8 level;
+ int level;
- if (!acpi_ec_read(brightness_offset, &level)) {
+ if ((level = brightness_get(NULL)) < 0) {
len += sprintf(p + len, "level:\t\tunreadable\n");
} else {
len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
#define BRIGHTNESS_UP 4
#define BRIGHTNESS_DOWN 5
-static int brightness_write(char *buf)
+static int brightness_set(int value)
{
int cmos_cmd, inc, i;
- u8 level;
+ int current_value = brightness_get(NULL);
+
+ value &= 7;
+
+ cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
+ inc = value > current_value ? 1 : -1;
+ for (i = current_value; i != value; i += inc) {
+ if (!cmos_eval(cmos_cmd))
+ return -EIO;
+ if (!acpi_ec_write(brightness_offset, i + inc))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int brightness_write(char *buf)
+{
+ int level;
int new_level;
char *cmd;
while ((cmd = next_cmd(&buf))) {
- if (!acpi_ec_read(brightness_offset, &level))
- return -EIO;
+ if ((level = brightness_get(NULL)) < 0)
+ return level;
level &= 7;
if (strlencmp(cmd, "up") == 0) {
} else
return -EINVAL;
- cmos_cmd = new_level > level ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
- inc = new_level > level ? 1 : -1;
- for (i = level; i != new_level; i += inc) {
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- if (!acpi_ec_write(brightness_offset, i + inc))
- return -EIO;
- }
+ brightness_set(new_level);
+ }
+
+ return 0;
+}
+
+static int brightness_update_status(struct backlight_device *bd)
+{
+ return brightness_set(bd->props->brightness);
+}
+
+static struct backlight_properties ibm_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = brightness_get,
+ .update_status = brightness_update_status,
+ .max_brightness = 7,
+};
+
+static int brightness_init(void)
+{
+ ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
+ &ibm_backlight_data);
+ if (IS_ERR(ibm_backlight_device)) {
+ printk(IBM_ERR "Could not register backlight device\n");
+ return PTR_ERR(ibm_backlight_device);
}
return 0;
}
+static void brightness_exit(void)
+{
+ if (ibm_backlight_device) {
+ backlight_device_unregister(ibm_backlight_device);
+ ibm_backlight_device = NULL;
+ }
+}
+
static int volume_offset = 0x30;
static int volume_read(char *p)
return 0;
}
-static int fan_status_offset = 0x2f;
-static int fan_rpm_offset = 0x84;
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
-static int fan_read(char *p)
+static int fan_control_status_known;
+static u8 fan_control_initial_status;
+
+static void fan_watchdog_fire(struct work_struct *ignored);
+static int fan_watchdog_maxinterval;
+static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
+
+static int fan_init(void)
{
- int len = 0;
- int s;
- u8 lo, hi, status;
+ fan_status_access_mode = IBMACPI_FAN_NONE;
+ fan_control_access_mode = IBMACPI_FAN_WR_NONE;
+ fan_control_commands = 0;
+ fan_control_status_known = 1;
+ fan_watchdog_maxinterval = 0;
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
- if (!acpi_evalf(gfan_handle, &s, NULL, "d"))
- return -EIO;
+ fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
+ } else {
+ /* all other ThinkPads: note that even old-style
+ * ThinkPad ECs supports the fan control register */
+ if (likely(acpi_ec_read(fan_status_offset,
+ &fan_control_initial_status))) {
+ fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
+
+ /* In some ThinkPads, neither the EC nor the ACPI
+ * DSDT initialize the fan status, and it ends up
+ * being set to 0x07 when it *could* be either
+ * 0x07 or 0x80.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e),
+ * TP-76 (R52), TP-70 (T43, R52), which are known
+ * to be buggy. */
+ if (fan_control_initial_status == 0x07 &&
+ ibm_thinkpad_ec_found &&
+ ((ibm_thinkpad_ec_found[0] == '1' &&
+ ibm_thinkpad_ec_found[1] == 'Y') ||
+ (ibm_thinkpad_ec_found[0] == '7' &&
+ (ibm_thinkpad_ec_found[1] == '6' ||
+ ibm_thinkpad_ec_found[1] == '8' ||
+ ibm_thinkpad_ec_found[1] == '0'))
+ )) {
+ printk(IBM_NOTICE
+ "fan_init: initial fan status is "
+ "unknown, assuming it is in auto "
+ "mode\n");
+ fan_control_status_known = 0;
+ }
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "fan status and control unavailable\n");
+ return 0;
+ }
+ }
- len += sprintf(p + len, "level:\t\t%d\n", s);
+ if (sfan_handle) {
+ /* 570, 770x-JL */
+ fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
} else {
+ if (!gfan_handle) {
+ /* gfan without sfan means no fan control */
+ /* all other models implement TP EC 0x2f control */
+
+ if (fans_handle) {
+ /* X31, X40, X41 */
+ fan_control_access_mode =
+ IBMACPI_FAN_WR_ACPI_FANS;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_SPEED |
+ IBMACPI_FAN_CMD_LEVEL |
+ IBMACPI_FAN_CMD_ENABLE;
+ } else {
+ fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_LEVEL |
+ IBMACPI_FAN_CMD_ENABLE;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int fan_get_status(u8 *status)
+{
+ u8 s;
+
+ /* TODO:
+ * Add IBMACPI_FAN_RD_ACPI_FANS ? */
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+
+ if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ return -EIO;
+
+ if (likely(status))
+ *status = s & 0x07;
+
+ break;
+
+ case IBMACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_read(fan_status_offset, &status))
- len += sprintf(p + len, "status:\t\tunreadable\n");
- else
- len += sprintf(p + len, "status:\t\t%s\n",
- enabled(status, 7));
+ if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
+ return -EIO;
- if (!acpi_ec_read(fan_rpm_offset, &lo) ||
- !acpi_ec_read(fan_rpm_offset + 1, &hi))
- len += sprintf(p + len, "speed:\t\tunreadable\n");
- else
- len += sprintf(p + len, "speed:\t\t%d\n",
- (hi << 8) + lo);
+ if (likely(status))
+ *status = s;
+
+ break;
+
+ default:
+ return -ENXIO;
}
- if (sfan_handle)
- /* 570, 770x-JL */
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-7)\n");
- if (!gfan_handle)
+ return 0;
+}
+
+static int fan_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
- len += sprintf(p + len, "commands:\tenable, disable\n");
- if (fans_handle)
- /* X31, X40 */
+ if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi)))
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void fan_exit(void)
+{
+ cancel_delayed_work(&fan_watchdog_task);
+ flush_scheduled_work();
+}
+
+static void fan_watchdog_reset(void)
+{
+ static int fan_watchdog_active = 0;
+
+ if (fan_watchdog_active)
+ cancel_delayed_work(&fan_watchdog_task);
+
+ if (fan_watchdog_maxinterval > 0) {
+ fan_watchdog_active = 1;
+ if (!schedule_delayed_work(&fan_watchdog_task,
+ msecs_to_jiffies(fan_watchdog_maxinterval
+ * 1000))) {
+ printk(IBM_ERR "failed to schedule the fan watchdog, "
+ "watchdog will not trigger\n");
+ }
+ } else
+ fan_watchdog_active = 0;
+}
+
+static int fan_read(char *p)
+{
+ int len = 0;
+ int rc;
+ u8 status;
+ unsigned int speed = 0;
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status(&status)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "status:\t\t%s\n"
+ "level:\t\t%d\n",
+ (status != 0) ? "enabled" : "disabled", status);
+ break;
+
+ case IBMACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status(&status)) < 0)
+ return rc;
+
+ if (unlikely(!fan_control_status_known)) {
+ if (status != fan_control_initial_status)
+ fan_control_status_known = 1;
+ else
+ /* Return most likely status. In fact, it
+ * might be the only possible status */
+ status = IBMACPI_FAN_EC_AUTO;
+ }
+
+ len += sprintf(p + len, "status:\t\t%s\n",
+ (status != 0) ? "enabled" : "disabled");
+
+ /* No ThinkPad boots on disengaged mode, we can safely
+ * assume the tachometer is online if fan control status
+ * was unknown */
+ if ((rc = fan_get_speed(&speed)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "speed:\t\t%d\n", speed);
+
+ if (status & IBMACPI_FAN_EC_DISENGAGED)
+ /* Disengaged mode takes precedence */
+ len += sprintf(p + len, "level:\t\tdisengaged\n");
+ else if (status & IBMACPI_FAN_EC_AUTO)
+ len += sprintf(p + len, "level:\t\tauto\n");
+ else
+ len += sprintf(p + len, "level:\t\t%d\n", status);
+ break;
+
+ case IBMACPI_FAN_NONE:
+ default:
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ }
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
+ len += sprintf(p + len, "commands:\tlevel <level>");
+
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ len += sprintf(p + len, " (<level> is 0-7)\n");
+ break;
+
+ default:
+ len += sprintf(p + len, " (<level> is 0-7, "
+ "auto, disengaged)\n");
+ break;
+ }
+ }
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
+ len += sprintf(p + len, "commands:\tenable, disable\n"
+ "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
+ "1-120 (seconds))\n");
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
len += sprintf(p + len, "commands:\tspeed <speed>"
" (<speed> is 0-65535)\n");
return len;
}
-static int fan_write(char *buf)
+static int fan_set_level(int level)
{
- char *cmd;
- int level, speed;
-
- while ((cmd = next_cmd(&buf))) {
- if (sfan_handle &&
- sscanf(cmd, "level %d", &level) == 1 &&
- level >= 0 && level <= 7) {
- /* 570, 770x-JL */
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if (level >= 0 && level <= 7) {
if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
return -EIO;
- } else if (!gfan_handle && strlencmp(cmd, "enable") == 0) {
- /* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_write(fan_status_offset, 0x80))
- return -EIO;
- } else if (!gfan_handle && strlencmp(cmd, "disable") == 0) {
- /* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_write(fan_status_offset, 0x00))
- return -EIO;
- } else if (fans_handle &&
- sscanf(cmd, "speed %d", &speed) == 1 &&
- speed >= 0 && speed <= 65535) {
- /* X31, X40 */
+ } else
+ return -EINVAL;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if ((level != IBMACPI_FAN_EC_AUTO) &&
+ (level != IBMACPI_FAN_EC_DISENGAGED) &&
+ ((level < 0) || (level > 7)))
+ return -EINVAL;
+
+ if (!acpi_ec_write(fan_status_offset, level))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_enable(void)
+{
+ u8 s;
+ int rc;
+
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if ((rc = fan_get_status(&s)) < 0)
+ return rc;
+
+ /* Don't go out of emergency fan mode */
+ if (s != 7)
+ s = IBMACPI_FAN_EC_AUTO;
+
+ if (!acpi_ec_write(fan_status_offset, s))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if ((rc = fan_get_status(&s)) < 0)
+ return rc;
+
+ s &= 0x07;
+
+ /* Set fan to at least level 4 */
+ if (s < 4)
+ s = 4;
+
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
+ return -EIO;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_disable(void)
+{
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if (!acpi_ec_write(fan_status_offset, 0x00))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
+ return -EIO;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_speed(int speed)
+{
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ if (speed >= 0 && speed <= 65535) {
if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
speed, speed, speed))
return -EIO;
} else
return -EINVAL;
- }
+ break;
+ default:
+ return -ENXIO;
+ }
return 0;
}
+static int fan_write_cmd_level(const char *cmd, int *rc)
+{
+ int level;
+
+ if (strlencmp(cmd, "level auto") == 0)
+ level = IBMACPI_FAN_EC_AUTO;
+ else if (strlencmp(cmd, "level disengaged") == 0)
+ level = IBMACPI_FAN_EC_DISENGAGED;
+ else if (sscanf(cmd, "level %d", &level) != 1)
+ return 0;
+
+ if ((*rc = fan_set_level(level)) == -ENXIO)
+ printk(IBM_ERR "level command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_enable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "enable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_enable()) == -ENXIO)
+ printk(IBM_ERR "enable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_disable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "disable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_disable()) == -ENXIO)
+ printk(IBM_ERR "disable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_speed(const char *cmd, int *rc)
+{
+ int speed;
+
+ /* TODO:
+ * Support speed <low> <medium> <high> ? */
+
+ if (sscanf(cmd, "speed %d", &speed) != 1)
+ return 0;
+
+ if ((*rc = fan_set_speed(speed)) == -ENXIO)
+ printk(IBM_ERR "speed command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_watchdog(const char *cmd, int *rc)
+{
+ int interval;
+
+ if (sscanf(cmd, "watchdog %d", &interval) != 1)
+ return 0;
+
+ if (interval < 0 || interval > 120)
+ *rc = -EINVAL;
+ else
+ fan_watchdog_maxinterval = interval;
+
+ return 1;
+}
+
+static int fan_write(char *buf)
+{
+ char *cmd;
+ int rc = 0;
+
+ while (!rc && (cmd = next_cmd(&buf))) {
+ if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
+ fan_write_cmd_level(cmd, &rc)) &&
+ !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
+ (fan_write_cmd_enable(cmd, &rc) ||
+ fan_write_cmd_disable(cmd, &rc) ||
+ fan_write_cmd_watchdog(cmd, &rc))) &&
+ !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
+ fan_write_cmd_speed(cmd, &rc))
+ )
+ rc = -EINVAL;
+ else if (!rc)
+ fan_watchdog_reset();
+ }
+
+ return rc;
+}
+
+static void fan_watchdog_fire(struct work_struct *ignored)
+{
+ printk(IBM_NOTICE "fan watchdog: enabling fan\n");
+ if (fan_set_enable()) {
+ printk(IBM_ERR "fan watchdog: error while enabling fan\n");
+ /* reschedule for later */
+ fan_watchdog_reset();
+ }
+}
+
static struct ibm_struct ibms[] = {
{
.name = "driver",
- .init = driver_init,
+ .init = ibm_acpi_driver_init,
.read = driver_read,
},
{
.name = "brightness",
.read = brightness_read,
.write = brightness_write,
+ .init = brightness_init,
+ .exit = brightness_exit,
},
{
.name = "volume",
.name = "fan",
.read = fan_read,
.write = fan_write,
+ .init = fan_init,
+ .exit = fan_exit,
.experimental = 1,
},
};
static int dispatch_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
int len;
if (!ibm || !ibm->read)
static int dispatch_write(struct file *file, const char __user * userbuf,
unsigned long count, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
char *kernbuf;
int ret;
static void dispatch_notify(acpi_handle handle, u32 event, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
if (!ibm || !ibm->notify)
return;
ibm->name, status);
return -ENODEV;
}
-
+ ibm->notify_installed = 1;
return 0;
}
{
int ret;
- ibm->driver = kmalloc(sizeof(struct acpi_driver), GFP_KERNEL);
+ ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
if (!ibm->driver) {
printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
return -1;
}
- memset(ibm->driver, 0, sizeof(struct acpi_driver));
- sprintf(ibm->driver->name, "%s/%s", IBM_NAME, ibm->name);
+ sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
ibm->driver->ids = ibm->hid;
ibm->driver->ops.add = &ibm_device_add;
ret = setup_notify(ibm);
if (ret < 0)
return ret;
- ibm->notify_installed = 1;
}
return 0;
ibm_exit(&ibms[i]);
remove_proc_entry(IBM_DIR, acpi_root_dir);
+
+ if (ibm_thinkpad_ec_found)
+ kfree(ibm_thinkpad_ec_found);
+}
+
+static char* __init check_dmi_for_ec(void)
+{
+ struct dmi_device *dev = NULL;
+ char ec_fw_string[18];
+
+ /*
+ * ThinkPad T23 or newer, A31 or newer, R50e or newer,
+ * X32 or newer, all Z series; Some models must have an
+ * up-to-date BIOS or they will not be detected.
+ *
+ * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+ */
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
+ if (sscanf(dev->name,
+ "IBM ThinkPad Embedded Controller -[%17c",
+ ec_fw_string) == 1) {
+ ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
+ ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+ return kstrdup(ec_fw_string, GFP_KERNEL);
+ }
+ }
+ return NULL;
}
static int __init acpi_ibm_init(void)
return -ENODEV;
}
+ /* Models with newer firmware report the EC in DMI */
+ ibm_thinkpad_ec_found = check_dmi_for_ec();
+ if (ibm_thinkpad_ec_found)
+ printk(IBM_INFO "ThinkPad EC firmware %s\n",
+ ibm_thinkpad_ec_found);
+
/* these handles are not required */
IBM_HANDLE_INIT(vid);
IBM_HANDLE_INIT(vid2);
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsxfobj")
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_get_id
+ *
+ * PARAMETERS: Handle - Handle of object whose id is desired
+ * ret_id - Where the id will be placed
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: This routine returns the owner id associated with a handle
+ *
+ ******************************************************************************/
+acpi_status acpi_get_id(acpi_handle handle, acpi_owner_id * ret_id)
+{
+ struct acpi_namespace_node *node;
+ acpi_status status;
+
+ /* Parameter Validation */
+
+ if (!ret_id) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Convert and validate the handle */
+
+ node = acpi_ns_map_handle_to_node(handle);
+ if (!node) {
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ return (AE_BAD_PARAMETER);
+ }
+
+ *ret_id = node->owner_id;
+
+ status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_get_id)
+
/*******************************************************************************
*
* FUNCTION: acpi_get_type
handle = phandle;
status = acpi_evaluate_integer(handle, "_PXM", NULL, &pxm);
if (ACPI_SUCCESS(status))
- return (int)pxm;
+ return pxm;
status = acpi_get_parent(handle, &phandle);
} while (ACPI_SUCCESS(status));
return -1;
static void acpi_os_execute_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
+
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
return;
acpi_os_create_cache(char *name, u16 size, u16 depth, acpi_cache_t ** cache)
{
*cache = kmem_cache_create(name, size, 0, 0, NULL, NULL);
- if (cache == NULL)
+ if (*cache == NULL)
return AE_ERROR;
else
return AE_OK;
acpi_status acpi_os_purge_cache(acpi_cache_t * cache)
{
- (void)kmem_cache_shrink(cache);
+ kmem_cache_shrink(cache);
return (AE_OK);
}
if (!device || !device->parent)
return -EINVAL;
- pathname = kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kzalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
- memset(pathname, 0, ACPI_PATHNAME_MAX);
buffer.length = ACPI_PATHNAME_MAX;
buffer.pointer = pathname;
- data = kmalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
if (!data) {
kfree(pathname);
return -ENOMEM;
}
- memset(data, 0, sizeof(struct acpi_pci_data));
acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
if (!device || !device->parent)
return -EINVAL;
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kzalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
- memset(pathname, 0, ACPI_PATHNAME_MAX);
buffer.length = ACPI_PATHNAME_MAX;
buffer.pointer = pathname;
char *pathname = NULL;
struct acpi_buffer buffer = { 0, NULL };
-
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kzalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
- memset(pathname, 0, ACPI_PATHNAME_MAX);
buffer.length = ACPI_PATHNAME_MAX;
buffer.pointer = pathname;
return -EINVAL;
}
- data = kmalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
if (!data) {
kfree(pathname);
return -ENOMEM;
}
- memset(data, 0, sizeof(struct acpi_pci_data));
data->id = *id;
data->bus = bus;
if (!prt)
return -EINVAL;
- entry = kmalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL);
+ entry = kzalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
- memset(entry, 0, sizeof(struct acpi_prt_entry));
entry->id.segment = segment;
entry->id.bus = bus;
static int first_time = 1;
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kzalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
- memset(pathname, 0, ACPI_PATHNAME_MAX);
if (first_time) {
acpi_prt.count = 0;
return -ENODEV;
}
- prt = kmalloc(buffer.length, GFP_KERNEL);
+ prt = kzalloc(buffer.length, GFP_KERNEL);
if (!prt) {
return -ENOMEM;
}
- memset(prt, 0, buffer.length);
buffer.pointer = prt;
status = acpi_get_irq_routing_table(handle, &buffer);
static acpi_status
acpi_pci_link_check_possible(struct acpi_resource *resource, void *context)
{
- struct acpi_pci_link *link = (struct acpi_pci_link *)context;
+ struct acpi_pci_link *link = context;
u32 i = 0;
if (!link || !irq)
return -EINVAL;
- resource = kmalloc(sizeof(*resource) + 1, irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
+ resource = kzalloc(sizeof(*resource) + 1, irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
if (!resource)
return -ENOMEM;
- memset(resource, 0, sizeof(*resource) + 1);
buffer.length = sizeof(*resource) + 1;
buffer.pointer = resource;
return -1;
}
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
if (!link) {
printk(KERN_ERR PREFIX "Invalid link context\n");
return -1;
return -1;
}
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
if (!link) {
printk(KERN_ERR PREFIX "Invalid link context\n");
return -1;
if (!device)
return -EINVAL;
- link = kmalloc(sizeof(struct acpi_pci_link), GFP_KERNEL);
+ link = kzalloc(sizeof(struct acpi_pci_link), GFP_KERNEL);
if (!link)
return -ENOMEM;
- memset(link, 0, sizeof(struct acpi_pci_link));
link->device = device;
strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
mutex_lock(&acpi_link_lock);
list_del(&link->node);
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr) {
- if (*pptr != driver)
- continue;
- *pptr = (*pptr)->next;
- break;
+ if (*pptr == driver)
+ break;
+ pptr = &(*pptr)->next;
}
+ BUG_ON(!*pptr);
+ *pptr = (*pptr)->next;
if (!driver->remove)
return;
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
- int *busnr = (int *)data;
+ int *busnr = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
if (!device)
return -EINVAL;
- root = kmalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
+ root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
- memset(root, 0, sizeof(struct acpi_pci_root));
INIT_LIST_HEAD(&root->node);
root->device = device;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- root = (struct acpi_pci_root *)acpi_driver_data(device);
+ root = acpi_driver_data(device);
kfree(root);
return result;
}
- *resource = (struct acpi_power_resource *)acpi_driver_data(device);
+ *resource = acpi_driver_data(device);
if (!resource)
return -ENODEV;
struct acpi_power_resource *resource = NULL;
- resource = (struct acpi_power_resource *)seq->private;
+ resource = seq->private;
if (!resource)
goto end;
if (!device)
return -EINVAL;
- resource = kmalloc(sizeof(struct acpi_power_resource), GFP_KERNEL);
+ resource = kzalloc(sizeof(struct acpi_power_resource), GFP_KERNEL);
if (!resource)
return -ENOMEM;
- memset(resource, 0, sizeof(struct acpi_power_resource));
resource->device = device;
strcpy(resource->name, device->pnp.bus_id);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- resource = (struct acpi_power_resource *)acpi_driver_data(device);
+ resource = acpi_driver_data(device);
acpi_power_remove_fs(device);
static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
if (!pr)
if (cpu_index == -1) {
if (ACPI_FAILURE
(acpi_processor_hotadd_init(pr->handle, &pr->id))) {
- printk(KERN_ERR PREFIX
- "Getting cpuindex for acpiid 0x%x\n",
- pr->acpi_id);
return -ENODEV;
}
}
* Don't trust it blindly
*/
if (processor_device_array[pr->id] != NULL &&
- processor_device_array[pr->id] != (void *)device) {
+ processor_device_array[pr->id] != device) {
printk(KERN_WARNING "BIOS reported wrong ACPI id"
"for the processor\n");
return -ENODEV;
}
- processor_device_array[pr->id] = (void *)device;
+ processor_device_array[pr->id] = device;
processors[pr->id] = pr;
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_processor *pr = (struct acpi_processor *)data;
+ struct acpi_processor *pr = data;
struct acpi_device *device = NULL;
if (!device)
return -EINVAL;
- pr = kmalloc(sizeof(struct acpi_processor), GFP_KERNEL);
+ pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
return -ENOMEM;
- memset(pr, 0, sizeof(struct acpi_processor));
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- pr = (struct acpi_processor *)acpi_driver_data(device);
+ pr = acpi_driver_data(device);
if (pr->id >= NR_CPUS) {
kfree(pr);
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
if (!acpi_processor_dir)
- return 0;
+ return -ENOMEM;
acpi_processor_dir->owner = THIS_MODULE;
result = acpi_bus_register_driver(&acpi_processor_driver);
if (result < 0) {
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
- return 0;
+ return result;
}
acpi_processor_install_hotplug_notify();
static void acpi_safe_halt(void)
{
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
if (!need_resched())
safe_halt();
current_thread_info()->status |= TS_POLLING;
*/
if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
if (need_resched()) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
return -ENODEV;
}
- cst = (union acpi_object *)buffer.pointer;
+ cst = buffer.pointer;
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
memset(&cx, 0, sizeof(cx));
- element = (union acpi_object *)&(cst->package.elements[i]);
+ element = &(cst->package.elements[i]);
if (element->type != ACPI_TYPE_PACKAGE)
continue;
if (element->package.count != 4)
continue;
- obj = (union acpi_object *)&(element->package.elements[0]);
+ obj = &(element->package.elements[0]);
if (obj->type != ACPI_TYPE_BUFFER)
continue;
continue;
/* There should be an easy way to extract an integer... */
- obj = (union acpi_object *)&(element->package.elements[1]);
+ obj = &(element->package.elements[1]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
}
}
- obj = (union acpi_object *)&(element->package.elements[2]);
+ obj = &(element->package.elements[2]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
cx.latency = obj->integer.value;
- obj = (union acpi_object *)&(element->package.elements[3]);
+ obj = &(element->package.elements[3]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
unsigned int i;
return -ENODEV;
}
- pss = (union acpi_object *)buffer.pointer;
+ pss = buffer.pointer;
if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) {
printk(KERN_ERR PREFIX "Invalid _PSS data\n");
result = -EFAULT;
if (result)
return result;
- result = acpi_processor_get_platform_limit(pr);
- if (result)
- return result;
-
return 0;
}
static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
int i;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
struct acpi_processor_performance *perf;
char state_string[12] = { '\0' };
unsigned int new_state = 0;
return -ENODEV;
}
- psd = (union acpi_object *) buffer.pointer;
+ psd = buffer.pointer;
if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n"));
result = -EFAULT;
}
err_ret:
- if (retval) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error while parsing _PSD domain information. Assuming no coordination\n"));
- }
-
for_each_possible_cpu(i) {
pr = processors[i];
if (!pr || !pr->performance)
if (result)
return result;
- pr = (struct acpi_processor *)acpi_driver_data(device);
+ pr = acpi_driver_data(device);
if (!pr)
return -ENODEV;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
char limit_string[25] = { '\0' };
int px = 0;
int tx = 0;
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
int i = 0;
int result = 0;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
char state_string[12] = { '\0' };
static int acpi_battery_read_info(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
int cscale;
int result = 0;
static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
int result = 0;
int cscale;
acpi_battery_write_alarm(struct file *file, const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *seq = (struct seq_file *)file->private_data;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct seq_file *seq = file->private_data;
+ struct acpi_battery *battery = seq->private;
char alarm_string[12] = { '\0' };
int result, old_alarm, new_alarm;
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_battery_set_alarm() failed\n"));
- (void)acpi_battery_set_alarm(battery, old_alarm);
+ acpi_battery_set_alarm(battery, old_alarm);
goto end;
}
result = acpi_battery_get_alarm(battery);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_battery_get_alarm() failed\n"));
- (void)acpi_battery_set_alarm(battery, old_alarm);
+ acpi_battery_set_alarm(battery, old_alarm);
goto end;
}
static int acpi_ac_read_state(struct seq_file *seq, void *offset)
{
- struct acpi_sbs *sbs = (struct acpi_sbs *)seq->private;
+ struct acpi_sbs *sbs = seq->private;
int result;
if (sbs->zombie) {
battery->init_state = 1;
}
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generic_add_fs(&battery->battery_entry,
acpi_battery_dir,
}
if (old_battery_present != new_battery_present) {
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generate_event(sbs->device,
ACPI_SBS_BATTERY_NOTIFY_STATUS,
new_battery_present,
}
}
if (old_remaining_capacity != battery->state.remaining_capacity) {
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generate_event(sbs->device,
ACPI_SBS_BATTERY_NOTIFY_STATUS,
new_battery_present,
int id, cnt;
acpi_status status = AE_OK;
- sbs = kmalloc(sizeof(struct acpi_sbs), GFP_KERNEL);
+ sbs = kzalloc(sizeof(struct acpi_sbs), GFP_KERNEL);
if (!sbs) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "kmalloc() failed\n"));
return -ENOMEM;
}
- memset(sbs, 0, sizeof(struct acpi_sbs));
cnt = 0;
while (cnt < 10) {
init_timer(&sbs->update_timer);
if (update_mode == QUEUE_UPDATE_MODE) {
status = acpi_os_execute(OSL_GPE_HANDLER,
- acpi_sbs_update_queue, (void *)sbs);
+ acpi_sbs_update_queue, sbs);
if (status != AE_OK) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_os_execute() failed\n"));
int acpi_sbs_remove(struct acpi_device *device, int type)
{
- struct acpi_sbs *sbs = NULL;
+ struct acpi_sbs *sbs;
int id;
if (!device) {
if (!child)
return -EINVAL;
- device = kmalloc(sizeof(struct acpi_device), GFP_KERNEL);
+ device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
printk(KERN_ERR PREFIX "Memory allocation error\n");
return -ENOMEM;
}
- memset(device, 0, sizeof(struct acpi_device));
device->handle = handle;
device->parent = parent;
#endif
/*
- * Disable all wakeup GPEs before power off.
- *
+ * Disable all wakeup GPEs before entering requested sleep state.
+ * @sleep_state: ACPI state
* Since acpi_enter_sleep_state() will disable all
* RUNTIME GPEs, we simply mark all GPES that
- * are not enabled for wakeup from S5 as RUNTIME.
+ * are not enabled for wakeup from requested state as RUNTIME.
*/
void acpi_gpe_sleep_prepare(u32 sleep_state)
{
static int
acpi_table_compute_checksum(void *table_pointer, unsigned long length)
{
- u8 *p = (u8 *) table_pointer;
+ u8 *p = table_pointer;
unsigned long remains = length;
unsigned long sum = 0;
ACPI_EXPORT_SYMBOL(acpi_load_tables)
-#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
* FUNCTION: acpi_load_table
ACPI_EXPORT_SYMBOL(acpi_load_table)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_unload_table_id
+ *
+ * PARAMETERS: table_type - Type of table to be unloaded
+ * id - Owner ID of the table to be removed.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: This routine is used to force the unload of a table (by id)
+ *
+ ******************************************************************************/
+acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id)
+{
+ struct acpi_table_desc *table_desc;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_unload_table);
+
+ /* Parameter validation */
+ if (table_type > ACPI_TABLE_ID_MAX)
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+
+ /* Find table from the requested type list */
+ table_desc = acpi_gbl_table_lists[table_type].next;
+ while (table_desc && table_desc->owner_id != id)
+ table_desc = table_desc->next;
+
+ if (!table_desc)
+ return_ACPI_STATUS(AE_NOT_EXIST);
+
+ /*
+ * Delete all namespace objects owned by this table. Note that these
+ * objects can appear anywhere in the namespace by virtue of the AML
+ * "Scope" operator. Thus, we need to track ownership by an ID, not
+ * simply a position within the hierarchy
+ */
+ acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (ACPI_FAILURE(status))
+ return_ACPI_STATUS(status);
+
+ (void)acpi_tb_uninstall_table(table_desc);
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_unload_table_id)
+
+#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
* FUNCTION: acpi_unload_table
static void acpi_thermal_check(void *data)
{
int result = 0;
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
+ struct acpi_thermal *tz = data;
unsigned long sleep_time = 0;
int i = 0;
struct acpi_thermal_state state;
static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
int i = 0;
int j = 0;
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
char *limit_string;
int num, critical, hot, passive;
int i = 0;
- limit_string = kmalloc(ACPI_THERMAL_MAX_LIMIT_STR_LEN, GFP_KERNEL);
+ limit_string = kzalloc(ACPI_THERMAL_MAX_LIMIT_STR_LEN, GFP_KERNEL);
if (!limit_string)
return -ENOMEM;
- memset(limit_string, 0, ACPI_THERMAL_MAX_LIMIT_STR_LEN);
-
active = kmalloc(ACPI_THERMAL_MAX_ACTIVE * sizeof(int), GFP_KERNEL);
if (!active) {
kfree(limit_string);
static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
int result = 0;
char mode_string[12] = { '\0' };
static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
int result = 0;
char polling_string[12] = { '\0' };
int seconds = 0;
static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
+ struct acpi_thermal *tz = data;
struct acpi_device *device = NULL;
if (!device)
return -EINVAL;
- tz = kmalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
+ tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
if (!tz)
return -ENOMEM;
- memset(tz, 0, sizeof(struct acpi_thermal));
tz->device = device;
strcpy(tz->name, device->pnp.bus_id);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- tz = (struct acpi_thermal *)acpi_driver_data(device);
+ tz = acpi_driver_data(device);
/* avoid timer adding new defer task */
tz->zombie = 1;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- tz = (struct acpi_thermal *)acpi_driver_data(device);
+ tz = acpi_driver_data(device);
acpi_thermal_get_temperature(tz);
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+
#include <asm/uaccess.h>
#include <acpi/acpi_drivers.h>
}
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
+static struct backlight_device *toshiba_backlight_device;
static int force_fan;
static int last_key_event;
static int key_event_valid;
return result;
}
-static char *read_lcd(char *p)
+static int get_lcd(struct backlight_device *bd)
{
u32 hci_result;
u32 value;
hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result);
if (hci_result == HCI_SUCCESS) {
- value = value >> HCI_LCD_BRIGHTNESS_SHIFT;
+ return (value >> HCI_LCD_BRIGHTNESS_SHIFT);
+ } else
+ return -EFAULT;
+}
+
+static char *read_lcd(char *p)
+{
+ int value = get_lcd(NULL);
+
+ if (value >= 0) {
p += sprintf(p, "brightness: %d\n", value);
p += sprintf(p, "brightness_levels: %d\n",
HCI_LCD_BRIGHTNESS_LEVELS);
return p;
}
+static int set_lcd(int value)
+{
+ u32 hci_result;
+
+ value = value << HCI_LCD_BRIGHTNESS_SHIFT;
+ hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
+ if (hci_result != HCI_SUCCESS)
+ return -EFAULT;
+
+ return 0;
+}
+
+static int set_lcd_status(struct backlight_device *bd)
+{
+ return set_lcd(bd->props->brightness);
+}
+
static unsigned long write_lcd(const char *buffer, unsigned long count)
{
int value;
- u32 hci_result;
+ int ret;
if (sscanf(buffer, " brightness : %i", &value) == 1 &&
value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
- value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
- return -EFAULT;
+ ret = set_lcd(value);
+ if (ret == 0)
+ ret = count;
} else {
- return -EINVAL;
+ ret = -EINVAL;
}
-
- return count;
+ return ret;
}
static char *read_video(char *p)
return AE_OK;
}
+static struct backlight_properties toshiba_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = get_lcd,
+ .update_status = set_lcd_status,
+ .max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1,
+};
+
+static void __exit toshiba_acpi_exit(void)
+{
+ if (toshiba_backlight_device)
+ backlight_device_unregister(toshiba_backlight_device);
+
+ remove_device();
+
+ if (toshiba_proc_dir)
+ remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+
+ return;
+}
+
static int __init toshiba_acpi_init(void)
{
acpi_status status = AE_OK;
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
}
- return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
-}
-
-static void __exit toshiba_acpi_exit(void)
-{
- remove_device();
-
- if (toshiba_proc_dir)
- remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+ toshiba_backlight_device = backlight_device_register("toshiba",NULL,
+ NULL,
+ &toshiba_backlight_data);
+ if (IS_ERR(toshiba_backlight_device)) {
+ printk(KERN_ERR "Could not register toshiba backlight device\n");
+ toshiba_backlight_device = NULL;
+ toshiba_acpi_exit();
+ }
- return;
+ return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
}
module_init(toshiba_acpi_init);
if (thread_id != acpi_gbl_prev_thread_id) {
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
- ("\n**** Context Switch from TID %X to TID %X ****\n\n",
- (u32) acpi_gbl_prev_thread_id, (u32) thread_id);
+ ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
+ (unsigned long) acpi_gbl_prev_thread_id,
+ (unsigned long) thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
#endif
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X attempting to acquire Mutex [%s]\n",
- (u32) this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
+ "Thread %lX attempting to acquire Mutex [%s]\n",
+ (unsigned long) this_thread_id,
+ acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
ACPI_WAIT_FOREVER);
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X acquired Mutex [%s]\n",
- (u32) this_thread_id,
+ "Thread %lX acquired Mutex [%s]\n",
+ (unsigned long) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
ACPI_EXCEPTION((AE_INFO, status,
- "Thread %X could not acquire Mutex [%X]",
- (u32) this_thread_id, mutex_id));
+ "Thread %lX could not acquire Mutex [%X]",
+ (unsigned long) this_thread_id, mutex_id));
}
return (status);
this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X releasing Mutex [%s]\n", (u32) this_thread_id,
+ "Thread %lX releasing Mutex [%s]\n",
+ (unsigned long) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
return AE_BAD_DATA;
}
- format_string = (char *)format->pointer;
+ format_string = format->pointer;
/*
* Calculate size_required.
if (!data)
return AE_BAD_PARAMETER;
- element = kmalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
+ element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
if (!element)
return AE_NO_MEMORY;
- memset(element, 0, sizeof(union acpi_object));
buffer.length = sizeof(union acpi_object);
buffer.pointer = element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
return AE_BAD_DATA;
}
- *data = kmalloc(element->string.length + 1, GFP_KERNEL);
+ *data = kzalloc(element->string.length + 1, GFP_KERNEL);
if (!data) {
printk(KERN_ERR PREFIX "Memory allocation\n");
return -ENOMEM;
}
- memset(*data, 0, element->string.length + 1);
memcpy(*data, element->string.pointer, element->string.length);
if (ACPI_FAILURE(status))
goto end;
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
if ((buffer.length == 0) || !package) {
printk(KERN_ERR PREFIX "No return object (len %X ptr %p)\n",
*
* Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
* Copyright (C) 2004 Bruno Ducrot <ducrot@poupinou.org>
+ * Copyright (C) 2006 Thomas Tuttle <linux-kernel@ttuttle.net>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83
#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84
-#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x82
-#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x83
-#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x84
-#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x85
-#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x86
+#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x85
+#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86
+#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87
+#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x88
+#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x89
#define ACPI_VIDEO_HEAD_INVALID (~0u - 1)
#define ACPI_VIDEO_HEAD_END (~0u)
if (ACPI_FAILURE(status))
return -ENODEV;
- obj = (union acpi_object *)buffer.pointer;
+ obj = buffer.pointer;
if (obj && obj->type == ACPI_TYPE_BUFFER)
*edid = obj;
int count = 0;
union acpi_object *o;
- br = kmalloc(sizeof(*br), GFP_KERNEL);
+ br = kzalloc(sizeof(*br), GFP_KERNEL);
if (!br) {
printk(KERN_ERR "can't allocate memory\n");
} else {
- memset(br, 0, sizeof(*br));
br->levels = kmalloc(obj->package.count *
sizeof *(br->levels), GFP_KERNEL);
if (!br->levels)
static int acpi_video_device_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
if (!dev)
static int acpi_video_device_state_seq_show(struct seq_file *seq, void *offset)
{
int status;
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
unsigned long state;
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_device *dev = (struct acpi_video_device *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_device *dev = m->private;
char str[12] = { 0 };
u32 state = 0;
static int
acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
int i;
const char __user * buffer,
size_t count, loff_t * data)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_device *dev = (struct acpi_video_device *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_device *dev = m->private;
char str[4] = { 0 };
unsigned int level = 0;
int i;
static int acpi_video_device_EDID_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
int status;
int i;
union acpi_object *edid = NULL;
if (!device)
return -ENODEV;
- vid_dev = (struct acpi_video_device *)acpi_driver_data(device);
+ vid_dev = acpi_driver_data(device);
if (!vid_dev)
return -ENODEV;
{
struct acpi_video_device *vid_dev;
- vid_dev = (struct acpi_video_device *)acpi_driver_data(device);
+ vid_dev = acpi_driver_data(device);
if (!vid_dev || !vid_dev->video || !vid_dev->video->dir)
return -ENODEV;
/* video bus */
static int acpi_video_bus_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
if (!video)
static int acpi_video_bus_ROM_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
if (!video)
static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
unsigned long options;
int status;
static int acpi_video_bus_POST_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
int status;
unsigned long id;
static int acpi_video_bus_DOS_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
seq_printf(seq, "DOS setting: <%d>\n", video->dos_setting);
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_bus *video = (struct acpi_video_bus *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_bus *video = m->private;
char str[12] = { 0 };
unsigned long opt, options;
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_bus *video = (struct acpi_video_bus *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_bus *video = m->private;
char str[12] = { 0 };
unsigned long opt;
struct acpi_video_bus *video;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
if (!acpi_device_dir(device)) {
acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
struct acpi_video_bus *video;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
if (acpi_device_dir(device)) {
remove_proc_entry("info", acpi_device_dir(device));
acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
if (ACPI_SUCCESS(status)) {
- data = kmalloc(sizeof(struct acpi_video_device), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_video_device), GFP_KERNEL);
if (!data)
return -ENOMEM;
- memset(data, 0, sizeof(struct acpi_video_device));
-
strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
acpi_driver_data(device) = data;
return status;
}
- dod = (union acpi_object *)buffer.pointer;
+ dod = buffer.pointer;
if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
status = -EFAULT;
count = 0;
for (i = 0; i < dod->package.count; i++) {
- obj = (union acpi_object *)&dod->package.elements[i];
+ obj = &dod->package.elements[i];
if (obj->type != ACPI_TYPE_INTEGER) {
printk(KERN_ERR PREFIX "Invalid _DOD data\n");
acpi_video_get_next_level(struct acpi_video_device *device,
u32 level_current, u32 event)
{
- /*Fix me */
- return level_current;
+ int min, max, min_above, max_below, i, l;
+ max = max_below = 0;
+ min = min_above = 255;
+ for (i = 0; i < device->brightness->count; i++) {
+ l = device->brightness->levels[i];
+ if (l < min)
+ min = l;
+ if (l > max)
+ max = l;
+ if (l < min_above && l > level_current)
+ min_above = l;
+ if (l > max_below && l < level_current)
+ max_below = l;
+ }
+
+ switch (event) {
+ case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:
+ return (level_current < max) ? min_above : min;
+ case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:
+ return (level_current < max) ? min_above : max;
+ case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:
+ return (level_current > min) ? max_below : min;
+ case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:
+ case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:
+ return 0;
+ default:
+ return level_current;
+ }
}
static void
static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)data;
+ struct acpi_video_bus *video = data;
struct acpi_device *device = NULL;
printk("video bus notify\n");
static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_video_device *video_device =
- (struct acpi_video_device *)data;
+ struct acpi_video_device *video_device = data;
struct acpi_device *device = NULL;
-
- printk("video device notify\n");
if (!video_device)
return;
if (!device)
return -EINVAL;
- video = kmalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
+ video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
if (!video)
return -ENOMEM;
- memset(video, 0, sizeof(struct acpi_video_bus));
video->device = device;
strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
acpi_video_bus_stop_devices(video);
if ATA
+config ATA_NONSTANDARD
+ bool
+ default n
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
If unsure, say N.
config PATA_OPTIDMA
- tristate "OPTI FireStar PATA support (Veyr Experimental)"
+ tristate "OPTI FireStar PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables DMA/PIO support for the later OPTi
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
board_ahci = 0,
dma_addr_t cmd_tbl_dma;
void *rx_fis;
dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ int ncq_saw_spurious_sdb_cnt;
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
};
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
- { PCI_VDEVICE(AL, 0x5288), board_ahci }, /* ULi M5288 */
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
{
u32 cmd, scontrol;
- cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-
- if (cap & HOST_CAP_SSC) {
- /* enable transitions to slumber mode */
- scontrol = readl(port_mmio + PORT_SCR_CTL);
- if ((scontrol & 0x0f00) > 0x100) {
- scontrol &= ~0xf00;
- writel(scontrol, port_mmio + PORT_SCR_CTL);
- }
-
- /* put device into slumber mode */
- writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD);
-
- /* wait for the transition to complete */
- ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER,
- PORT_CMD_ICC_SLUMBER, 1, 50);
- }
+ if (!(cap & HOST_CAP_SSS))
+ return;
- /* put device into listen mode */
- if (cap & HOST_CAP_SSS) {
- /* first set PxSCTL.DET to 0 */
- scontrol = readl(port_mmio + PORT_SCR_CTL);
- scontrol &= ~0xf;
- writel(scontrol, port_mmio + PORT_SCR_CTL);
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
+ scontrol &= ~0xf;
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
- /* then set PxCMD.SUD to 0 */
- cmd &= ~PORT_CMD_SPIN_UP;
- writel(cmd, port_mmio + PORT_CMD);
- }
+ /* then set PxCMD.SUD to 0 */
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+ cmd &= ~PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
}
static void ahci_init_port(void __iomem *port_mmio, u32 cap,
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(ap->device, &tf);
- tf.command = 0xff;
+ tf.command = 0x80;
ata_tf_to_fis(&tf, d2h_fis, 0);
rc = sata_std_hardreset(ap, class);
void __iomem *mmio = ap->host->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
struct ata_eh_info *ehi = &ap->eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
u32 status, qc_active;
- int rc;
+ int rc, known_irq = 0;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
/* hmmm... a spurious interupt */
- /* some devices send D2H reg with I bit set during NCQ command phase */
- if (ap->sactive && (status & PORT_IRQ_D2H_REG_FIS))
+ /* if !NCQ, ignore. No modern ATA device has broken HSM
+ * implementation for non-NCQ commands.
+ */
+ if (!ap->sactive)
return;
- /* ignore interim PIO setup fis interrupts */
- if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS))
- return;
+ if (status & PORT_IRQ_D2H_REG_FIS) {
+ if (!pp->ncq_saw_d2h)
+ ata_port_printk(ap, KERN_INFO,
+ "D2H reg with I during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_d2h = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_DMAS_FIS) {
+ if (!pp->ncq_saw_dmas)
+ ata_port_printk(ap, KERN_INFO,
+ "DMAS FIS during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_dmas = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS &&
+ pp->ncq_saw_spurious_sdb_cnt < 10) {
+ /* SDB FIS containing spurious completions might be
+ * dangerous, we need to know more about them. Print
+ * more of it.
+ */
+ const u32 *f = pp->rx_fis + RX_FIS_SDB;
+
+ ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]),
+ pp->ncq_saw_spurious_sdb_cnt < 10 ?
+ "" : ", shutting up");
+
+ pp->ncq_saw_spurious_sdb_cnt++;
+ known_irq = 1;
+ }
- if (ata_ratelimit())
+ if (!known_irq)
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(irq_stat 0x%x active_tag %d sactive 0x%x)\n",
+ "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
status, ap->active_tag, ap->sactive);
}
/**
* generic_set_mode - mode setting
* @ap: interface to set up
+ * @unused: returned device on error
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
* and respect them.
*/
-static void generic_set_mode(struct ata_port *ap)
+static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
}
}
}
+ return 0;
}
static struct scsi_host_template generic_sht = {
int i, rc = 0, used_dma = 0, found = 0;
/* has private set_mode? */
- if (ap->ops->set_mode) {
- /* FIXME: make ->set_mode handle no device case and
- * return error code and failing device on failure.
- */
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- if (ata_dev_ready(&ap->device[i])) {
- ap->ops->set_mode(ap);
- break;
- }
- }
- return 0;
- }
+ if (ap->ops->set_mode)
+ return ap->ops->set_mode(ap, r_failed_dev);
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ /* collect port action mask recorded in dev actions */
+ ehc->i.action |= ehc->i.dev_action[i] & ~ATA_EH_PERDEV_MASK;
+ ehc->i.dev_action[i] &= ATA_EH_PERDEV_MASK;
+
/* process hotplug request */
if (dev->flags & ATA_DFLAG_DETACH)
ata_eh_detach_dev(dev);
#define SECTOR_SIZE 512
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap,
const struct scsi_device *scsidev);
if (cmd->use_sg) {
qc->__sg = (struct scatterlist *) cmd->request_buffer;
qc->n_elem = cmd->use_sg;
- } else {
+ } else if (cmd->request_bufflen) {
qc->__sg = &qc->sgent;
qc->n_elem = 1;
}
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
* (to start). Perhaps these commands should be preceded by
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- const u8 *scsicmd)
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
+ const u8 *cdb = scmd->cmnd;
+
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[1] & 0x1) {
+ if (cdb[1] & 0x1) {
; /* ignore IMMED bit, violates sat-r05 */
}
- if (scsicmd[4] & 0x2)
+ if (cdb[4] & 0x2)
goto invalid_fld; /* LOEJ bit set not supported */
- if (((scsicmd[4] >> 4) & 0xf) != 0)
+ if (((cdb[4] >> 4) & 0xf) != 0)
goto invalid_fld; /* power conditions not supported */
- if (scsicmd[4] & 0x1) {
+ if (cdb[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
if (qc->dev->flags & ATA_DFLAG_LBA) {
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
}
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate (ignored)
*
* Sets up an ATA taskfile to issue FLUSH CACHE or
* FLUSH CACHE EXT.
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
/**
* scsi_6_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 6-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("six-byte command\n");
- lba |= ((u64)scsicmd[2]) << 8;
- lba |= ((u64)scsicmd[3]);
+ lba |= ((u64)cdb[2]) << 8;
+ lba |= ((u64)cdb[3]);
- len |= ((u32)scsicmd[4]);
+ len |= ((u32)cdb[4]);
*plba = lba;
*plen = len;
/**
* scsi_10_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 10-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("ten-byte command\n");
- lba |= ((u64)scsicmd[2]) << 24;
- lba |= ((u64)scsicmd[3]) << 16;
- lba |= ((u64)scsicmd[4]) << 8;
- lba |= ((u64)scsicmd[5]);
+ lba |= ((u64)cdb[2]) << 24;
+ lba |= ((u64)cdb[3]) << 16;
+ lba |= ((u64)cdb[4]) << 8;
+ lba |= ((u64)cdb[5]);
- len |= ((u32)scsicmd[7]) << 8;
- len |= ((u32)scsicmd[8]);
+ len |= ((u32)cdb[7]) << 8;
+ len |= ((u32)cdb[8]);
*plba = lba;
*plen = len;
/**
* scsi_16_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 16-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("sixteen-byte command\n");
- lba |= ((u64)scsicmd[2]) << 56;
- lba |= ((u64)scsicmd[3]) << 48;
- lba |= ((u64)scsicmd[4]) << 40;
- lba |= ((u64)scsicmd[5]) << 32;
- lba |= ((u64)scsicmd[6]) << 24;
- lba |= ((u64)scsicmd[7]) << 16;
- lba |= ((u64)scsicmd[8]) << 8;
- lba |= ((u64)scsicmd[9]);
+ lba |= ((u64)cdb[2]) << 56;
+ lba |= ((u64)cdb[3]) << 48;
+ lba |= ((u64)cdb[4]) << 40;
+ lba |= ((u64)cdb[5]) << 32;
+ lba |= ((u64)cdb[6]) << 24;
+ lba |= ((u64)cdb[7]) << 16;
+ lba |= ((u64)cdb[8]) << 8;
+ lba |= ((u64)cdb[9]);
- len |= ((u32)scsicmd[10]) << 24;
- len |= ((u32)scsicmd[11]) << 16;
- len |= ((u32)scsicmd[12]) << 8;
- len |= ((u32)scsicmd[13]);
+ len |= ((u32)cdb[10]) << 24;
+ len |= ((u32)cdb[11]) << 16;
+ len |= ((u32)cdb[12]) << 8;
+ len |= ((u32)cdb[13]);
*plba = lba;
*plen = len;
/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts SCSI VERIFY command to an ATA READ VERIFY command.
*
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
+ const u8 *cdb = scmd->cmnd;
u64 block;
u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[0] == VERIFY)
- scsi_10_lba_len(scsicmd, &block, &n_block);
- else if (scsicmd[0] == VERIFY_16)
- scsi_16_lba_len(scsicmd, &block, &n_block);
- else
+ if (cdb[0] == VERIFY) {
+ if (scmd->cmd_len < 10)
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ } else if (cdb[0] == VERIFY_16) {
+ if (scmd->cmd_len < 16)
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ } else
goto invalid_fld;
if (!n_block)
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
/**
* ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts any of six SCSI read/write commands into the
* ATA counterpart, including starting sector (LBA),
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
unsigned int tf_flags = 0;
u64 block;
u32 n_block;
int rc;
- if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
- scsicmd[0] == WRITE_16)
+ if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16)
tf_flags |= ATA_TFLAG_WRITE;
/* Calculate the SCSI LBA, transfer length and FUA. */
- switch (scsicmd[0]) {
+ switch (cdb[0]) {
case READ_10:
case WRITE_10:
- scsi_10_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 10))
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
case READ_6:
case WRITE_6:
- scsi_6_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scmd->cmd_len < 6))
+ goto invalid_fld;
+ scsi_6_lba_len(cdb, &block, &n_block);
/* for 6-byte r/w commands, transfer length 0
* means 256 blocks of data, not 0 block.
break;
case READ_16:
case WRITE_16:
- scsi_16_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
default:
goto out_of_range;
/* treat all other errors as -EINVAL, fall through */
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
ata_xlat_func_t xlat_func)
{
struct ata_queued_cmd *qc;
- u8 *scsicmd = cmd->cmnd;
int is_io = xlat_func == ata_scsi_rw_xlat;
VPRINTK("ENTER\n");
qc->complete_fn = ata_scsi_qc_complete;
- if (xlat_func(qc, scsicmd))
+ if (xlat_func(qc))
goto early_finish;
/* select device, send command to hardware */
/**
* atapi_xlat - Initialize PACKET taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI CDB associated with this PACKET command
*
* LOCKING:
* spin_lock_irqsave(host lock)
* RETURNS:
* Zero on success, non-zero on failure.
*/
-
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
int using_pio = (dev->flags & ATA_DFLAG_PIO);
- int nodata = (cmd->sc_data_direction == DMA_NONE);
+ int nodata = (scmd->sc_data_direction == DMA_NONE);
if (!using_pio)
/* Check whether ATAPI DMA is safe */
if (ata_check_atapi_dma(qc))
using_pio = 1;
- memcpy(&qc->cdb, scsicmd, dev->cdb_len);
+ memset(qc->cdb, 0, dev->cdb_len);
+ memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
qc->complete_fn = atapi_qc_complete;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- if (cmd->sc_data_direction == DMA_TO_DEVICE) {
+ if (scmd->sc_data_direction == DMA_TO_DEVICE) {
qc->tf.flags |= ATA_TFLAG_WRITE;
DPRINTK("direction: write\n");
}
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE))
+ if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
- qc->nbytes = cmd->request_bufflen;
+ qc->nbytes = scmd->request_bufflen;
return 0;
}
/**
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI command to convert
*
* Handles either 12 or 16-byte versions of the CDB.
*
* RETURNS:
* Zero on success, non-zero on failure.
*/
-static unsigned int
-ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &(qc->tf);
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
- if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
goto invalid_fld;
/* We may not issue DMA commands if no DMA mode is set */
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
- if (scsicmd[1] & 0xe0)
+ if (cdb[1] & 0xe0)
/* PIO multi not supported yet */
goto invalid_fld;
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
*/
- if (scsicmd[0] == ATA_16) {
+ if (cdb[0] == ATA_16) {
/*
* 16-byte CDB - may contain extended commands.
*
* If that is the case, copy the upper byte register values.
*/
- if (scsicmd[1] & 0x01) {
- tf->hob_feature = scsicmd[3];
- tf->hob_nsect = scsicmd[5];
- tf->hob_lbal = scsicmd[7];
- tf->hob_lbam = scsicmd[9];
- tf->hob_lbah = scsicmd[11];
+ if (cdb[1] & 0x01) {
+ tf->hob_feature = cdb[3];
+ tf->hob_nsect = cdb[5];
+ tf->hob_lbal = cdb[7];
+ tf->hob_lbam = cdb[9];
+ tf->hob_lbah = cdb[11];
tf->flags |= ATA_TFLAG_LBA48;
} else
tf->flags &= ~ATA_TFLAG_LBA48;
/*
* Always copy low byte, device and command registers.
*/
- tf->feature = scsicmd[4];
- tf->nsect = scsicmd[6];
- tf->lbal = scsicmd[8];
- tf->lbam = scsicmd[10];
- tf->lbah = scsicmd[12];
- tf->device = scsicmd[13];
- tf->command = scsicmd[14];
+ tf->feature = cdb[4];
+ tf->nsect = cdb[6];
+ tf->lbal = cdb[8];
+ tf->lbam = cdb[10];
+ tf->lbah = cdb[12];
+ tf->device = cdb[13];
+ tf->command = cdb[14];
} else {
/*
* 12-byte CDB - incapable of extended commands.
*/
tf->flags &= ~ATA_TFLAG_LBA48;
- tf->feature = scsicmd[3];
- tf->nsect = scsicmd[4];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[6];
- tf->lbah = scsicmd[7];
- tf->device = scsicmd[8];
- tf->command = scsicmd[9];
+ tf->feature = cdb[3];
+ tf->nsect = cdb[4];
+ tf->lbal = cdb[5];
+ tf->lbam = cdb[6];
+ tf->lbah = cdb[7];
+ tf->device = cdb[8];
+ tf->command = cdb[9];
}
/*
* If slave is possible, enforce correct master/slave bit
*/
tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
tf->flags |= ATA_TFLAG_WRITE;
/*
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE;
+ qc->nsect = scmd->request_bufflen / ATA_SECT_SIZE;
/* request result TF */
qc->flags |= ATA_QCFLAG_RESULT_TF;
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
/* "Invalid field in cdb" */
return 1;
}
#endif
}
-static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd,
+static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
void (*done)(struct scsi_cmnd *),
struct ata_device *dev)
{
int rc = 0;
+ if (unlikely(!scmd->cmd_len)) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+ scmd->result = DID_ERROR << 16;
+ done(scmd);
+ return 0;
+ }
+
if (dev->class == ATA_DEV_ATA) {
ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- cmd->cmnd[0]);
+ scmd->cmnd[0]);
if (xlat_func)
- rc = ata_scsi_translate(dev, cmd, done, xlat_func);
+ rc = ata_scsi_translate(dev, scmd, done, xlat_func);
else
- ata_scsi_simulate(dev, cmd, done);
+ ata_scsi_simulate(dev, scmd, done);
} else
- rc = ata_scsi_translate(dev, cmd, done, atapi_xlat);
+ rc = ata_scsi_translate(dev, scmd, done, atapi_xlat);
return rc;
}
*/
void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
{
- ata_bmdma_stop(qc);
+ if (qc->ap->ioaddr.bmdma_addr)
+ ata_bmdma_stop(qc);
}
#ifdef CONFIG_PCI
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
bmdma += 8;
- if(inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
probe_ent->irq_flags = IRQF_SHARED;
if (port_mask & ATA_PORT_PRIMARY) {
- probe_ent->irq = ATA_PRIMARY_IRQ;
+ probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
if (bmdma) {
probe_ent->port[0].bmdma_addr = bmdma;
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[0]);
if (port_mask & ATA_PORT_SECONDARY) {
if (probe_ent->irq)
- probe_ent->irq2 = ATA_SECONDARY_IRQ;
+ probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
else
- probe_ent->irq = ATA_SECONDARY_IRQ;
+ probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
if (bmdma) {
probe_ent->port[1].bmdma_addr = bmdma + 8;
- if (inb(bmdma + 10) & 0x80)
+ if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 10) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[1]);
#endif
}
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- disable_dev_on_err = 0;
- goto err_out;
- }
-
- if (legacy_mode) {
+ if (!legacy_mode) {
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ disable_dev_on_err = 0;
+ goto err_out;
+ }
+ } else {
+ /* Deal with combined mode hack. This side of the logic all
+ goes away once the combined mode hack is killed in 2.6.21 */
if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) {
struct resource *conflict, res;
res.start = ATA_PRIMARY_CMD;
}
} else
legacy_mode |= ATA_PORT_SECONDARY;
+
+ if (legacy_mode & ATA_PORT_PRIMARY)
+ pci_request_region(pdev, 1, DRV_NAME);
+ if (legacy_mode & ATA_PORT_SECONDARY)
+ pci_request_region(pdev, 3, DRV_NAME);
+ /* If there is a DMA resource, allocate it */
+ pci_request_region(pdev, 4, DRV_NAME);
}
/* we have legacy mode, but all ports are unavailable */
err_out_ent:
kfree(probe_ent);
err_out_regions:
- if (legacy_mode & ATA_PORT_PRIMARY)
- release_region(ATA_PRIMARY_CMD, 8);
- if (legacy_mode & ATA_PORT_SECONDARY)
- release_region(ATA_SECONDARY_CMD, 8);
- pci_release_regions(pdev);
+ /* All this conditional stuff is needed for the combined mode hack
+ until 2.6.21 when it can go */
+ if (legacy_mode) {
+ pci_release_region(pdev, 4);
+ if (legacy_mode & ATA_PORT_PRIMARY) {
+ release_region(ATA_PRIMARY_CMD, 8);
+ pci_release_region(pdev, 1);
+ }
+ if (legacy_mode & ATA_PORT_SECONDARY) {
+ release_region(ATA_SECONDARY_CMD, 8);
+ pci_release_region(pdev, 3);
+ }
+ } else
+ pci_release_regions(pdev);
err_out:
if (disable_dev_on_err)
pci_disable_device(pdev);
static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 udma_data[] = {
- 0x31, 0x21, 0x11, 0x25, 0x15, 0x05
+ 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
};
static const u8 mwdma_data[] = {
0x30, 0x20, 0x10
pci_read_config_byte(pdev, pciD, ®D);
pci_read_config_byte(pdev, pciU, ®U);
- regD &= ~(0x20 << shift);
- regU &= ~(0x35 << shift);
+ /* DMA bits off */
+ regD &= ~(0x20 << adev->devno);
+ /* DMA control bits */
+ regU &= ~(0x30 << shift);
+ /* DMA timing bits */
+ regU &= ~(0x05 << adev->devno);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ /* Merge thge timing value */
regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
- else
+ /* Merge the control bits */
+ regU |= 1 << adev->devno; /* UDMA on */
+ if (adev->dma_mode > 2) /* 15nS timing */
+ regU |= 4 << adev->devno;
+ } else
regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
regD |= 0x20 << adev->devno;
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 dma_intr;
- int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+ int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int dma_reg = ap->port_no ? ARTTIM2 : CFR;
ata_bmdma_stop(qc);
static int cs5530_reinit_one(struct pci_dev *pdev)
{
/* If we fail on resume we are doomed */
- BUG_ON(cs5530_init_chip());
+ if (cs5530_init_chip())
+ BUG();
return ata_pci_device_resume(pdev);
}
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.5.1"
+#define DRV_VERSION "0.5.2"
struct hpt_clock {
u8 xfer_speed;
static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
{
- if (adev->class != ATA_DEV_ATA) {
+ if (adev->class == ATA_DEV_ATA) {
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int mscreg = 0x50 + 2 * ap->port_no;
+ int mscreg = 0x50 + 4 * ap->port_no;
u8 bwsr_stat, msc_stat;
pci_read_config_byte(pdev, 0x6A, &bwsr_stat);
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.3.2"
enum {
HPT_PCI_FAST = (1 << 31),
return 0;
}
-static int hpt3x2n_use_dpll(struct ata_port *ap, int reading)
+static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
{
long flags = (long)ap->host->private_data;
/* See if we should use the DPLL */
- if (reading == 0)
+ if (writing)
return USE_DPLL; /* Needed for write */
if (flags & PCI66)
return USE_DPLL; /* Needed at 66Mhz */
/**
* it821x_smart_set_mode - mode setting
* @ap: interface to set up
+ * @unused: device that failed (error only)
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
* and respect them.
*/
-static void it821x_smart_set_mode(struct ata_port *ap)
+static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
}
}
}
+ return 0;
}
/**
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.1ac1"
-static void ixp4xx_set_mode(struct ata_port *ap)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
{
int i;
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void ixp4xx_phy_reset(struct ata_port *ap)
/**
* legacy_set_mode - mode setting
* @ap: IDE interface
+ * @unused: Device that failed when error is returned
*
* Use a non standard set_mode function. We don't want to be tuned.
*
* expand on this as per hdparm in the base kernel.
*/
-static void legacy_set_mode(struct ata_port *ap)
+static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static struct scsi_host_template legacy_sht = {
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
-static void pata_platform_set_mode(struct ata_port *ap)
+static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void pata_platform_host_stop(struct ata_host *host)
/**
* rz1000_set_mode - mode setting function
* @ap: ATA interface
+ * @unused: returned device on set_mode failure
*
* Use a non standard set_mode function. We don't want to be tuned. We
* would prefer to be BIOS generic but for the fact our hardware is
* whacked out.
*/
-static void rz1000_set_mode(struct ata_port *ap)
+static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
enable &= 3;
if (flags & VIA_SET_FIFO) {
- u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+ static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
u8 fifo;
pci_read_config_byte(pdev, 0x43, &fifo);
},
{ /* chip_7042 */
.sht = &mv_sht,
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- MV_FLAG_DUAL_HC),
+ .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_iie_ops,
{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
+ { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+
{ } /* terminate list */
};
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
- { PCI_VDEVICE(NVIDIA, 0x045c), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), GENERIC }, /* MCP67 */
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- int handled;
/* freeze if hotplugged */
if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) {
}
/* handle interrupt */
- handled = ata_host_intr(ap, qc);
- if (unlikely(!handled)) {
- /* spurious, clear it */
- ata_check_status(ap);
- }
-
- return 1;
+ return ata_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
u8 irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804)
>> (NV_INT_PORT_SHIFT * i);
+ if(ata_tag_valid(ap->active_tag))
+ /** NV_INT_DEV indication seems unreliable at times
+ at least in ADMA mode. Force it on always when a
+ command is active, to prevent losing interrupts. */
+ irq_stat |= NV_INT_DEV;
handled += nv_host_intr(ap, irq_stat);
continue;
}
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, ioaddr->ctl_addr);
+ writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
- writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
- writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
- writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
- writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ (void __iomem *) ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, ioaddr->feature_addr);
- writew(tf->nsect, ioaddr->nsect_addr);
- writew(tf->lbal, ioaddr->lbal_addr);
- writew(tf->lbam, ioaddr->lbam_addr);
- writew(tf->lbah, ioaddr->lbah_addr);
+ writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, ioaddr->device_addr);
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
ata_wait_idle(ap);
}
u16 nsect, lbal, lbam, lbah, feature;
tf->command = k2_stat_check_status(ap);
- tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
- nsect = readw(ioaddr->nsect_addr);
- lbal = readw(ioaddr->lbal_addr);
- lbam = readw(ioaddr->lbam_addr);
- lbah = readw(ioaddr->lbah_addr);
+ tf->device = readw((void __iomem *)ioaddr->device_addr);
+ feature = readw((void __iomem *)ioaddr->error_addr);
+ nsect = readw((void __iomem *)ioaddr->nsect_addr);
+ lbal = readw((void __iomem *)ioaddr->lbal_addr);
+ lbam = readw((void __iomem *)ioaddr->lbam_addr);
+ lbah = readw((void __iomem *)ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
static struct ata_port_info uli_port_info = {
.sht = &uli_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &uli_ops,
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void svia_noop_freeze(struct ata_port *ap);
static void vt6420_error_handler(struct ata_port *ap);
static const struct pci_device_id svia_pci_tbl[] = {
+ { PCI_VDEVICE(VIA, 0x5337), vt6420 },
{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .freeze = ata_bmdma_freeze,
+ .freeze = svia_noop_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = vt6420_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
+static void svia_noop_freeze(struct ata_port *ap)
+{
+ /* Some VIA controllers choke if ATA_NIEN is manipulated in
+ * certain way. Leave it alone and just clear pending IRQ.
+ */
+ ata_chk_status(ap);
+ ata_bmdma_irq_clear(ap);
+}
+
/**
* vt6420_prereset - prereset for vt6420
* @ap: target ATA port
vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
- writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
- writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
- writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
- writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ (void __iomem *) ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, ioaddr->feature_addr);
- writew(tf->nsect, ioaddr->nsect_addr);
- writew(tf->lbal, ioaddr->lbal_addr);
- writew(tf->lbam, ioaddr->lbam_addr);
- writew(tf->lbah, ioaddr->lbah_addr);
+ writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, ioaddr->device_addr);
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
ata_wait_idle(ap);
}
u16 nsect, lbal, lbam, lbah, feature;
tf->command = ata_check_status(ap);
- tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
- nsect = readw(ioaddr->nsect_addr);
- lbal = readw(ioaddr->lbal_addr);
- lbam = readw(ioaddr->lbam_addr);
- lbah = readw(ioaddr->lbah_addr);
+ tf->device = readw((void __iomem *) ioaddr->device_addr);
+ feature = readw((void __iomem *) ioaddr->error_addr);
+ nsect = readw((void __iomem *) ioaddr->nsect_addr);
+ lbal = readw((void __iomem *) ioaddr->lbal_addr);
+ lbam = readw((void __iomem *) ioaddr->lbam_addr);
+ lbah = readw((void __iomem *) ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
- writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
- writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
+ writel(0, (void __iomem *) base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
+ writel(0, (void __iomem *) base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
}
Note that extended debugging may create certain race conditions
itself. Enable this ONLY if you suspect problems with the driver.
-# bool 'Rolfs TI TNETA1570' CONFIG_ATM_TNETA1570 y
-# if [ "$CONFIG_ATM_TNETA1570" = "y" ]; then
-# bool ' Enable extended debugging' CONFIG_ATM_TNETA1570_DEBUG n
-# fi
config ATM_NICSTAR
tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
depends on PCI && ATM && !64BIT
}
-static void*
-fore200e_kmalloc(int size, gfp_t flags)
-{
- void *chunk = kzalloc(size, flags);
-
- if (!chunk)
- printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n", size, flags);
-
- return chunk;
-}
-
-
-static void
-fore200e_kfree(void* chunk)
-{
- kfree(chunk);
-}
-
-
/* allocate and align a chunk of memory intended to hold the data behing exchanged
between the driver and the adapter (using streaming DVMA) */
chunk->align_size = size;
chunk->direction = direction;
- chunk->alloc_addr = fore200e_kmalloc(chunk->alloc_size, GFP_KERNEL | GFP_DMA);
+ chunk->alloc_addr = kzalloc(chunk->alloc_size, GFP_KERNEL | GFP_DMA);
if (chunk->alloc_addr == NULL)
return -ENOMEM;
{
fore200e->bus->dma_unmap(fore200e, chunk->dma_addr, chunk->dma_size, chunk->direction);
- fore200e_kfree(chunk->alloc_addr);
+ kfree(chunk->alloc_addr);
}
return NULL;
}
- fore200e = fore200e_kmalloc(sizeof(struct fore200e), GFP_KERNEL);
+ fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
if (fore200e == NULL)
return NULL;
spin_unlock_irqrestore(&fore200e->q_lock, flags);
- fore200e_vcc = fore200e_kmalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC);
+ fore200e_vcc = kzalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC);
if (fore200e_vcc == NULL) {
vc_map->vcc = NULL;
return -ENOMEM;
if (fore200e->available_cell_rate < vcc->qos.txtp.max_pcr) {
up(&fore200e->rate_sf);
- fore200e_kfree(fore200e_vcc);
+ kfree(fore200e_vcc);
vc_map->vcc = NULL;
return -EAGAIN;
}
fore200e->available_cell_rate += vcc->qos.txtp.max_pcr;
- fore200e_kfree(fore200e_vcc);
+ kfree(fore200e_vcc);
return -EINVAL;
}
clear_bit(ATM_VF_PARTIAL,&vcc->flags);
ASSERT(fore200e_vcc);
- fore200e_kfree(fore200e_vcc);
+ kfree(fore200e_vcc);
}
u32 stats_dma_addr;
if (fore200e->stats == NULL) {
- fore200e->stats = fore200e_kmalloc(sizeof(struct stats), GFP_KERNEL | GFP_DMA);
+ fore200e->stats = kzalloc(sizeof(struct stats), GFP_KERNEL | GFP_DMA);
if (fore200e->stats == NULL)
return -ENOMEM;
}
}
-static inline unsigned int
-fore200e_swap(unsigned int in)
-{
-#if defined(__LITTLE_ENDIAN)
- return swab32(in);
-#else
- return in;
-#endif
-}
-
-
static int
fore200e_fetch_stats(struct fore200e* fore200e, struct sonet_stats __user *arg)
{
if (fore200e_getstats(fore200e) < 0)
return -EIO;
- tmp.section_bip = fore200e_swap(fore200e->stats->oc3.section_bip8_errors);
- tmp.line_bip = fore200e_swap(fore200e->stats->oc3.line_bip24_errors);
- tmp.path_bip = fore200e_swap(fore200e->stats->oc3.path_bip8_errors);
- tmp.line_febe = fore200e_swap(fore200e->stats->oc3.line_febe_errors);
- tmp.path_febe = fore200e_swap(fore200e->stats->oc3.path_febe_errors);
- tmp.corr_hcs = fore200e_swap(fore200e->stats->oc3.corr_hcs_errors);
- tmp.uncorr_hcs = fore200e_swap(fore200e->stats->oc3.ucorr_hcs_errors);
- tmp.tx_cells = fore200e_swap(fore200e->stats->aal0.cells_transmitted) +
- fore200e_swap(fore200e->stats->aal34.cells_transmitted) +
- fore200e_swap(fore200e->stats->aal5.cells_transmitted);
- tmp.rx_cells = fore200e_swap(fore200e->stats->aal0.cells_received) +
- fore200e_swap(fore200e->stats->aal34.cells_received) +
- fore200e_swap(fore200e->stats->aal5.cells_received);
+ tmp.section_bip = cpu_to_be32(fore200e->stats->oc3.section_bip8_errors);
+ tmp.line_bip = cpu_to_be32(fore200e->stats->oc3.line_bip24_errors);
+ tmp.path_bip = cpu_to_be32(fore200e->stats->oc3.path_bip8_errors);
+ tmp.line_febe = cpu_to_be32(fore200e->stats->oc3.line_febe_errors);
+ tmp.path_febe = cpu_to_be32(fore200e->stats->oc3.path_febe_errors);
+ tmp.corr_hcs = cpu_to_be32(fore200e->stats->oc3.corr_hcs_errors);
+ tmp.uncorr_hcs = cpu_to_be32(fore200e->stats->oc3.ucorr_hcs_errors);
+ tmp.tx_cells = cpu_to_be32(fore200e->stats->aal0.cells_transmitted) +
+ cpu_to_be32(fore200e->stats->aal34.cells_transmitted) +
+ cpu_to_be32(fore200e->stats->aal5.cells_transmitted);
+ tmp.rx_cells = cpu_to_be32(fore200e->stats->aal0.cells_received) +
+ cpu_to_be32(fore200e->stats->aal34.cells_received) +
+ cpu_to_be32(fore200e->stats->aal5.cells_received);
if (arg)
return copy_to_user(arg, &tmp, sizeof(struct sonet_stats)) ? -EFAULT : 0;
static int __devinit
fore200e_get_esi(struct fore200e* fore200e)
{
- struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
+ struct prom_data* prom = kzalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
int ok, i;
if (!prom)
ok = fore200e->bus->prom_read(fore200e, prom);
if (ok < 0) {
- fore200e_kfree(prom);
+ kfree(prom);
return -EBUSY;
}
fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ];
}
- fore200e_kfree(prom);
+ kfree(prom);
return 0;
}
DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn);
/* allocate the array of receive buffers */
- buffer = bsq->buffer = fore200e_kmalloc(nbr * sizeof(struct buffer), GFP_KERNEL);
+ buffer = bsq->buffer = kzalloc(nbr * sizeof(struct buffer), GFP_KERNEL);
if (buffer == NULL)
return -ENOMEM;
while (i > 0)
fore200e_chunk_free(fore200e, &buffer[ --i ].data);
- fore200e_kfree(buffer);
+ kfree(buffer);
return -ENOMEM;
}
goto out;
}
- fore200e = fore200e_kmalloc(sizeof(struct fore200e), GFP_KERNEL);
+ fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
if (fore200e == NULL) {
err = -ENOMEM;
goto out_disable;
" 4b5b:\n"
" crc_header_errors:\t\t%10u\n"
" framing_errors:\t\t%10u\n",
- fore200e_swap(fore200e->stats->phy.crc_header_errors),
- fore200e_swap(fore200e->stats->phy.framing_errors));
+ cpu_to_be32(fore200e->stats->phy.crc_header_errors),
+ cpu_to_be32(fore200e->stats->phy.framing_errors));
if (!left--)
return sprintf(page, "\n"
" path_febe_errors:\t\t%10u\n"
" corr_hcs_errors:\t\t%10u\n"
" ucorr_hcs_errors:\t\t%10u\n",
- fore200e_swap(fore200e->stats->oc3.section_bip8_errors),
- fore200e_swap(fore200e->stats->oc3.path_bip8_errors),
- fore200e_swap(fore200e->stats->oc3.line_bip24_errors),
- fore200e_swap(fore200e->stats->oc3.line_febe_errors),
- fore200e_swap(fore200e->stats->oc3.path_febe_errors),
- fore200e_swap(fore200e->stats->oc3.corr_hcs_errors),
- fore200e_swap(fore200e->stats->oc3.ucorr_hcs_errors));
+ cpu_to_be32(fore200e->stats->oc3.section_bip8_errors),
+ cpu_to_be32(fore200e->stats->oc3.path_bip8_errors),
+ cpu_to_be32(fore200e->stats->oc3.line_bip24_errors),
+ cpu_to_be32(fore200e->stats->oc3.line_febe_errors),
+ cpu_to_be32(fore200e->stats->oc3.path_febe_errors),
+ cpu_to_be32(fore200e->stats->oc3.corr_hcs_errors),
+ cpu_to_be32(fore200e->stats->oc3.ucorr_hcs_errors));
if (!left--)
return sprintf(page,"\n"
" vpi no conn:\t\t%10u\n"
" vci out of range:\t\t%10u\n"
" vci no conn:\t\t%10u\n",
- fore200e_swap(fore200e->stats->atm.cells_transmitted),
- fore200e_swap(fore200e->stats->atm.cells_received),
- fore200e_swap(fore200e->stats->atm.vpi_bad_range),
- fore200e_swap(fore200e->stats->atm.vpi_no_conn),
- fore200e_swap(fore200e->stats->atm.vci_bad_range),
- fore200e_swap(fore200e->stats->atm.vci_no_conn));
+ cpu_to_be32(fore200e->stats->atm.cells_transmitted),
+ cpu_to_be32(fore200e->stats->atm.cells_received),
+ cpu_to_be32(fore200e->stats->atm.vpi_bad_range),
+ cpu_to_be32(fore200e->stats->atm.vpi_no_conn),
+ cpu_to_be32(fore200e->stats->atm.vci_bad_range),
+ cpu_to_be32(fore200e->stats->atm.vci_no_conn));
if (!left--)
return sprintf(page,"\n"
" TX:\t\t\t%10u\n"
" RX:\t\t\t%10u\n"
" dropped:\t\t\t%10u\n",
- fore200e_swap(fore200e->stats->aal0.cells_transmitted),
- fore200e_swap(fore200e->stats->aal0.cells_received),
- fore200e_swap(fore200e->stats->aal0.cells_dropped));
+ cpu_to_be32(fore200e->stats->aal0.cells_transmitted),
+ cpu_to_be32(fore200e->stats->aal0.cells_received),
+ cpu_to_be32(fore200e->stats->aal0.cells_dropped));
if (!left--)
return sprintf(page,"\n"
" RX:\t\t\t%10u\n"
" dropped:\t\t\t%10u\n"
" protocol errors:\t\t%10u\n",
- fore200e_swap(fore200e->stats->aal34.cells_transmitted),
- fore200e_swap(fore200e->stats->aal34.cells_received),
- fore200e_swap(fore200e->stats->aal34.cells_dropped),
- fore200e_swap(fore200e->stats->aal34.cells_crc_errors),
- fore200e_swap(fore200e->stats->aal34.cells_protocol_errors),
- fore200e_swap(fore200e->stats->aal34.cspdus_transmitted),
- fore200e_swap(fore200e->stats->aal34.cspdus_received),
- fore200e_swap(fore200e->stats->aal34.cspdus_dropped),
- fore200e_swap(fore200e->stats->aal34.cspdus_protocol_errors));
+ cpu_to_be32(fore200e->stats->aal34.cells_transmitted),
+ cpu_to_be32(fore200e->stats->aal34.cells_received),
+ cpu_to_be32(fore200e->stats->aal34.cells_dropped),
+ cpu_to_be32(fore200e->stats->aal34.cells_crc_errors),
+ cpu_to_be32(fore200e->stats->aal34.cells_protocol_errors),
+ cpu_to_be32(fore200e->stats->aal34.cspdus_transmitted),
+ cpu_to_be32(fore200e->stats->aal34.cspdus_received),
+ cpu_to_be32(fore200e->stats->aal34.cspdus_dropped),
+ cpu_to_be32(fore200e->stats->aal34.cspdus_protocol_errors));
if (!left--)
return sprintf(page,"\n"
" dropped:\t\t\t%10u\n"
" CRC errors:\t\t%10u\n"
" protocol errors:\t\t%10u\n",
- fore200e_swap(fore200e->stats->aal5.cells_transmitted),
- fore200e_swap(fore200e->stats->aal5.cells_received),
- fore200e_swap(fore200e->stats->aal5.cells_dropped),
- fore200e_swap(fore200e->stats->aal5.congestion_experienced),
- fore200e_swap(fore200e->stats->aal5.cspdus_transmitted),
- fore200e_swap(fore200e->stats->aal5.cspdus_received),
- fore200e_swap(fore200e->stats->aal5.cspdus_dropped),
- fore200e_swap(fore200e->stats->aal5.cspdus_crc_errors),
- fore200e_swap(fore200e->stats->aal5.cspdus_protocol_errors));
+ cpu_to_be32(fore200e->stats->aal5.cells_transmitted),
+ cpu_to_be32(fore200e->stats->aal5.cells_received),
+ cpu_to_be32(fore200e->stats->aal5.cells_dropped),
+ cpu_to_be32(fore200e->stats->aal5.congestion_experienced),
+ cpu_to_be32(fore200e->stats->aal5.cspdus_transmitted),
+ cpu_to_be32(fore200e->stats->aal5.cspdus_received),
+ cpu_to_be32(fore200e->stats->aal5.cspdus_dropped),
+ cpu_to_be32(fore200e->stats->aal5.cspdus_crc_errors),
+ cpu_to_be32(fore200e->stats->aal5.cspdus_protocol_errors));
if (!left--)
return sprintf(page,"\n"
" large b2:\t\t\t%10u\n"
" RX PDUs:\t\t\t%10u\n"
" TX PDUs:\t\t\t%10lu\n",
- fore200e_swap(fore200e->stats->aux.small_b1_failed),
- fore200e_swap(fore200e->stats->aux.large_b1_failed),
- fore200e_swap(fore200e->stats->aux.small_b2_failed),
- fore200e_swap(fore200e->stats->aux.large_b2_failed),
- fore200e_swap(fore200e->stats->aux.rpd_alloc_failed),
+ cpu_to_be32(fore200e->stats->aux.small_b1_failed),
+ cpu_to_be32(fore200e->stats->aux.large_b1_failed),
+ cpu_to_be32(fore200e->stats->aux.small_b2_failed),
+ cpu_to_be32(fore200e->stats->aux.large_b2_failed),
+ cpu_to_be32(fore200e->stats->aux.rpd_alloc_failed),
fore200e->tx_sat);
if (!left--)
/********** initialise a card **********/
-static int __init hrz_init (hrz_dev * dev) {
+static int __devinit hrz_init (hrz_dev * dev) {
int onefivefive;
u16 chan;
/**
* firmware_loading_store - set value in the 'loading' control file
* @dev: device pointer
+ * @attr: device attribute pointer
* @buf: buffer to scan for loading control value
* @count: number of bytes in @buf
*
skb->nh.raw = skb->mac.raw = skb->data;
skb->protocol = __constant_htons(ETH_P_AOE);
skb->priority = 0;
- skb_put(skb, len);
- memset(skb->head, 0, len);
skb->next = skb->prev = NULL;
/* tell the network layer not to perform IP checksums
skb = f->skb;
h = (struct aoe_hdr *) skb->mac.raw;
ah = (struct aoe_atahdr *) (h+1);
- skb->len = sizeof *h + sizeof *ah;
- memset(h, 0, ETH_ZLEN);
+ skb_put(skb, sizeof *h + sizeof *ah);
+ memset(h, 0, skb->len);
f->tag = aoehdr_atainit(d, h);
f->waited = 0;
f->buf = buf;
skb->len += bcnt;
skb->data_len = bcnt;
} else {
- skb->len = ETH_ZLEN;
writebit = 0;
}
printk(KERN_INFO "aoe: skb alloc failure\n");
continue;
}
+ skb_put(skb, sizeof *h + sizeof *ch);
skb->dev = ifp;
if (sl_tail == NULL)
sl_tail = skb;
continue;
if (atomic_read(&skb_shinfo(f->skb)->dataref) == 1) {
skb_shinfo(f->skb)->nr_frags = f->skb->data_len = 0;
+ skb_trim(f->skb, 0);
return f;
}
n++;
skb = f->skb;
h = (struct aoe_hdr *) skb->mac.raw;
ah = (struct aoe_atahdr *) (h+1);
- skb->len = ETH_ZLEN;
- memset(h, 0, ETH_ZLEN);
+ skb_put(skb, sizeof *h + sizeof *ah);
+ memset(h, 0, skb->len);
f->tag = aoehdr_atainit(d, h);
f->waited = 0;
#include "cciss_scsi.c" /* For SCSI tape support */
+#define RAID_UNKNOWN 6
+
#ifdef CONFIG_PROC_FS
/*
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
-#define RAID_UNKNOWN 6
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; // Sectors per track
+ drv->raid_level = RAID_UNKNOWN;
} else {
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
- (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
+ (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
*/
static int pkt_generic_packet(struct pktcdvd_device *pd, struct packet_command *cgc)
{
- char sense[SCSI_SENSE_BUFFERSIZE];
- request_queue_t *q;
+ request_queue_t *q = bdev_get_queue(pd->bdev);
struct request *rq;
- DECLARE_COMPLETION_ONSTACK(wait);
- int err = 0;
+ int ret = 0;
- q = bdev_get_queue(pd->bdev);
+ rq = blk_get_request(q, (cgc->data_direction == CGC_DATA_WRITE) ?
+ WRITE : READ, __GFP_WAIT);
+
+ if (cgc->buflen) {
+ if (blk_rq_map_kern(q, rq, cgc->buffer, cgc->buflen, __GFP_WAIT))
+ goto out;
+ }
+
+ rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
+ memcpy(rq->cmd, cgc->cmd, CDROM_PACKET_SIZE);
+ if (sizeof(rq->cmd) > CDROM_PACKET_SIZE)
+ memset(rq->cmd + CDROM_PACKET_SIZE, 0, sizeof(rq->cmd) - CDROM_PACKET_SIZE);
- rq = blk_get_request(q, (cgc->data_direction == CGC_DATA_WRITE) ? WRITE : READ,
- __GFP_WAIT);
- rq->errors = 0;
- rq->rq_disk = pd->bdev->bd_disk;
- rq->bio = NULL;
- rq->buffer = NULL;
rq->timeout = 60*HZ;
- rq->data = cgc->buffer;
- rq->data_len = cgc->buflen;
- rq->sense = sense;
- memset(sense, 0, sizeof(sense));
- rq->sense_len = 0;
rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->cmd_flags |= REQ_HARDBARRIER;
if (cgc->quiet)
rq->cmd_flags |= REQ_QUIET;
- memcpy(rq->cmd, cgc->cmd, CDROM_PACKET_SIZE);
- if (sizeof(rq->cmd) > CDROM_PACKET_SIZE)
- memset(rq->cmd + CDROM_PACKET_SIZE, 0, sizeof(rq->cmd) - CDROM_PACKET_SIZE);
- rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
-
- rq->ref_count++;
- rq->end_io_data = &wait;
- rq->end_io = blk_end_sync_rq;
- elv_add_request(q, rq, ELEVATOR_INSERT_BACK, 1);
- generic_unplug_device(q);
- wait_for_completion(&wait);
-
- if (rq->errors)
- err = -EIO;
+ blk_execute_rq(rq->q, pd->bdev->bd_disk, rq, 0);
+ ret = rq->errors;
+out:
blk_put_request(rq);
- return err;
+ return ret;
}
/*
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/vio.h>
+#include <asm/firmware.h>
MODULE_DESCRIPTION("iSeries Virtual DASD");
MODULE_AUTHOR("Dave Boutcher");
{
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ rc = -ENODEV;
+ goto early_fail;
+ }
+
/* Try to open to our host lp */
if (viopath_hostLp == HvLpIndexInvalid)
vio_set_hostlp();
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_WRONG_SCO_MTU },
+ { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_WRONG_SCO_MTU },
/* ANYCOM Bluetooth USB-200 and USB-250 */
{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
+ /* HP laptop with Broadcom chip */
+ { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_WRONG_SCO_MTU },
+
+ /* Dell laptop with Broadcom chip */
+ { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_WRONG_SCO_MTU },
+
/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
+ { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
/* used in the audio ioctls */
#define CHECKAUDIO if ((ret=check_for_audio_disc(cdi, cdo))) return ret
+/*
+ * Another popular OS uses 7 seconds as the hard timeout for default
+ * commands, so it is a good choice for us as well.
+ */
+#define CDROM_DEF_TIMEOUT (7 * HZ)
+
/* Not-exported routines. */
static int open_for_data(struct cdrom_device_info * cdi);
static int check_for_audio_disc(struct cdrom_device_info * cdi,
cgc->buffer = (char *) buf;
cgc->buflen = len;
cgc->data_direction = type;
- cgc->timeout = 5*HZ;
+ cgc->timeout = CDROM_DEF_TIMEOUT;
}
/* DVD handling */
cdi->last_sense = s->sense_key;
}
- rq->bio = bio;
- if (blk_rq_unmap_user(rq))
+ if (blk_rq_unmap_user(bio))
ret = -EFAULT;
if (ret)
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/vio.h>
+#include <asm/firmware.h>
#define VIOCD_DEVICE "iseries/vcd"
struct proc_dir_entry *e;
int ret = 0;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
if (viopath_hostLp == HvLpIndexInvalid) {
vio_set_hostlp();
/* If we don't have a host, bail out */
int (*context_dtor) (struct drm_device * dev, int context);
int (*kernel_context_switch) (struct drm_device * dev, int old,
int new);
- void (*kernel_context_switch_unlock) (struct drm_device * dev,
- drm_lock_t *lock);
+ void (*kernel_context_switch_unlock) (struct drm_device * dev);
int (*vblank_wait) (struct drm_device * dev, unsigned int *sequence);
int (*vblank_wait2) (struct drm_device * dev, unsigned int *sequence);
int (*dri_library_name) (struct drm_device *dev, char *buf);
extern unsigned long drm_core_get_map_ofs(drm_map_t * map);
extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev);
-#ifndef pci_pretty_name
-#define pci_pretty_name(dev) ""
-#endif
-
#endif /* __KERNEL__ */
#endif
* modules but is required by the Sparc driver.
*/
if (dev->driver->kernel_context_switch_unlock)
- dev->driver->kernel_context_switch_unlock(dev, &lock);
+ dev->driver->kernel_context_switch_unlock(dev);
else {
drm_lock_transfer(dev, &dev->lock.hw_lock->lock,
DRM_KERNEL_CONTEXT);
if (!dev)
return -ENOMEM;
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto err_g1;
if ((ret = drm_fill_in_dev(dev, pdev, ent, driver))) {
printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
- goto err_g1;
+ goto err_g2;
}
if ((ret = drm_get_head(dev, &dev->primary)))
- goto err_g1;
+ goto err_g2;
DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
driver->name, driver->major, driver->minor, driver->patchlevel,
return 0;
- err_g1:
+err_g2:
+ pci_disable_device(pdev);
+err_g1:
drm_free(dev, sizeof(*dev), DRM_MEM_STUB);
return ret;
}
int err;
class = class_create(owner, name);
- if (!class) {
- err = -ENOMEM;
+ if (IS_ERR(class)) {
+ err = PTR_ERR(class);
goto err_out;
}
MKDEV(DRM_MAJOR, head->minor),
&(head->dev->pdev)->dev,
"card%d", head->minor);
- if (!class_dev) {
- err = -ENOMEM;
+ if (IS_ERR(class_dev)) {
+ err = PTR_ERR(class_dev);
goto err_out;
}
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
- struct list_head *list, *tmp;
+ struct list_head *list, *tmp, hits, *hit;
+ int nhits, nrects, slice[2], upper[2], lower[2], i;
+ unsigned counter[2] = { atomic_read(&dev->vbl_received),
+ atomic_read(&dev->vbl_received2) };
+ drm_drawable_info_t *drw;
+ drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
+ u32 cpp = dev_priv->cpp;
+ u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
+ XY_SRC_COPY_BLT_WRITE_ALPHA |
+ XY_SRC_COPY_BLT_WRITE_RGB)
+ : XY_SRC_COPY_BLT_CMD;
+ u32 pitchropcpp = (sarea_priv->pitch * cpp) | (0xcc << 16) |
+ (cpp << 23) | (1 << 24);
+ RING_LOCALS;
DRM_DEBUG("\n");
+ INIT_LIST_HEAD(&hits);
+
+ nhits = nrects = 0;
+
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
+ /* Find buffer swaps scheduled for this vertical blank */
list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
drm_i915_vbl_swap_t *vbl_swap =
list_entry(list, drm_i915_vbl_swap_t, head);
- atomic_t *counter = vbl_swap->pipe ? &dev->vbl_received2 :
- &dev->vbl_received;
-
- if ((atomic_read(counter) - vbl_swap->sequence) <= (1<<23)) {
- drm_drawable_info_t *drw;
-
- spin_unlock(&dev_priv->swaps_lock);
-
- spin_lock(&dev->drw_lock);
-
- drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
-
- if (drw) {
- int i, num_rects = drw->num_rects;
- drm_clip_rect_t *rect = drw->rects;
- drm_i915_sarea_t *sarea_priv =
- dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp;
- u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
- XY_SRC_COPY_BLT_WRITE_ALPHA |
- XY_SRC_COPY_BLT_WRITE_RGB)
- : XY_SRC_COPY_BLT_CMD;
- u32 pitchropcpp = (sarea_priv->pitch * cpp) |
- (0xcc << 16) | (cpp << 23) |
- (1 << 24);
- RING_LOCALS;
-
- i915_kernel_lost_context(dev);
-
- BEGIN_LP_RING(6);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(sarea_priv->width |
- sarea_priv->height << 16);
- OUT_RING(sarea_priv->width |
- sarea_priv->height << 16);
- OUT_RING(0);
- ADVANCE_LP_RING();
+ if ((counter[vbl_swap->pipe] - vbl_swap->sequence) > (1<<23))
+ continue;
+
+ list_del(list);
+ dev_priv->swaps_pending--;
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+ spin_unlock(&dev_priv->swaps_lock);
+ spin_lock(&dev->drw_lock);
- for (i = 0; i < num_rects; i++, rect++) {
- BEGIN_LP_RING(8);
+ drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
+
+ if (!drw) {
+ spin_unlock(&dev->drw_lock);
+ drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+ spin_lock(&dev_priv->swaps_lock);
+ continue;
+ }
- OUT_RING(cmd);
- OUT_RING(pitchropcpp);
- OUT_RING((rect->y1 << 16) | rect->x1);
- OUT_RING((rect->y2 << 16) | rect->x2);
- OUT_RING(sarea_priv->front_offset);
- OUT_RING((rect->y1 << 16) | rect->x1);
- OUT_RING(pitchropcpp & 0xffff);
- OUT_RING(sarea_priv->back_offset);
+ list_for_each(hit, &hits) {
+ drm_i915_vbl_swap_t *swap_cmp =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+ drm_drawable_info_t *drw_cmp =
+ drm_get_drawable_info(dev, swap_cmp->drw_id);
- ADVANCE_LP_RING();
- }
+ if (drw_cmp &&
+ drw_cmp->rects[0].y1 > drw->rects[0].y1) {
+ list_add_tail(list, hit);
+ break;
}
+ }
- spin_unlock(&dev->drw_lock);
+ spin_unlock(&dev->drw_lock);
- spin_lock(&dev_priv->swaps_lock);
+ /* List of hits was empty, or we reached the end of it */
+ if (hit == &hits)
+ list_add_tail(list, hits.prev);
- list_del(list);
+ nhits++;
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+ spin_lock(&dev_priv->swaps_lock);
+ }
+
+ if (nhits == 0) {
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+ return;
+ }
+
+ spin_unlock(&dev_priv->swaps_lock);
- dev_priv->swaps_pending--;
+ i915_kernel_lost_context(dev);
+
+ BEGIN_LP_RING(6);
+
+ OUT_RING(GFX_OP_DRAWRECT_INFO);
+ OUT_RING(0);
+ OUT_RING(0);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+
+ sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+
+ upper[0] = upper[1] = 0;
+ slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
+ slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
+ lower[0] = sarea_priv->pipeA_y + slice[0];
+ lower[1] = sarea_priv->pipeB_y + slice[0];
+
+ spin_lock(&dev->drw_lock);
+
+ /* Emit blits for buffer swaps, partitioning both outputs into as many
+ * slices as there are buffer swaps scheduled in order to avoid tearing
+ * (based on the assumption that a single buffer swap would always
+ * complete before scanout starts).
+ */
+ for (i = 0; i++ < nhits;
+ upper[0] = lower[0], lower[0] += slice[0],
+ upper[1] = lower[1], lower[1] += slice[1]) {
+ if (i == nhits)
+ lower[0] = lower[1] = sarea_priv->height;
+
+ list_for_each(hit, &hits) {
+ drm_i915_vbl_swap_t *swap_hit =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+ drm_clip_rect_t *rect;
+ int num_rects, pipe;
+ unsigned short top, bottom;
+
+ drw = drm_get_drawable_info(dev, swap_hit->drw_id);
+
+ if (!drw)
+ continue;
+
+ rect = drw->rects;
+ pipe = swap_hit->pipe;
+ top = upper[pipe];
+ bottom = lower[pipe];
+
+ for (num_rects = drw->num_rects; num_rects--; rect++) {
+ int y1 = max(rect->y1, top);
+ int y2 = min(rect->y2, bottom);
+
+ if (y1 >= y2)
+ continue;
+
+ BEGIN_LP_RING(8);
+
+ OUT_RING(cmd);
+ OUT_RING(pitchropcpp);
+ OUT_RING((y1 << 16) | rect->x1);
+ OUT_RING((y2 << 16) | rect->x2);
+ OUT_RING(sarea_priv->front_offset);
+ OUT_RING((y1 << 16) | rect->x1);
+ OUT_RING(pitchropcpp & 0xffff);
+ OUT_RING(sarea_priv->back_offset);
+
+ ADVANCE_LP_RING();
+ }
}
}
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ list_for_each_safe(hit, tmp, &hits) {
+ drm_i915_vbl_swap_t *swap_hit =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+
+ list_del(hit);
+
+ drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
+ }
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
if (!drm_get_drawable_info(dev, swap.drawable)) {
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- DRM_ERROR("Invalid drawable ID %d\n", swap.drawable);
+ DRM_DEBUG("Invalid drawable ID %d\n", swap.drawable);
return DRM_ERR(EINVAL);
}
/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*-
* Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com
*/
-/* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+/*
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All rights reserved.
*
/* r128_drv.h -- Private header for r128 driver -*- linux-c -*-
* Created: Mon Dec 13 09:51:11 1999 by faith@precisioninsight.com
*/
-/* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All rights reserved.
*
/* r128_state.c -- State support for r128 -*- linux-c -*-
* Created: Thu Jan 27 02:53:43 2000 by gareth@valinux.com
*/
-/* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+/*
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
return 0;
}
-/*
- * we expect offsets passed to the framebuffer to be either within video
- * memory or within AGP space
- */
-static __inline__ int r300_check_offset(drm_radeon_private_t *dev_priv,
- u32 offset)
-{
- /* we realy want to check against end of video aperture
- but this value is not being kept.
- This code is correct for now (does the same thing as the
- code that sets MC_FB_LOCATION) in radeon_cp.c */
- if (offset >= dev_priv->fb_location &&
- offset < (dev_priv->fb_location + dev_priv->fb_size))
- return 0;
- if (offset >= dev_priv->gart_vm_start &&
- offset < (dev_priv->gart_vm_start + dev_priv->gart_size))
- return 0;
- return 1;
-}
-
static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t *
dev_priv,
drm_radeon_kcmd_buffer_t
case MARK_SAFE:
break;
case MARK_CHECK_OFFSET:
- if (r300_check_offset(dev_priv, (u32) values[i])) {
+ if (!radeon_check_offset(dev_priv, (u32) values[i])) {
DRM_ERROR
("Offset failed range check (reg=%04x sz=%d)\n",
reg, sz);
i = 1;
while ((k < narrays) && (i < (count + 1))) {
i++; /* skip attribute field */
- if (r300_check_offset(dev_priv, payload[i])) {
+ if (!radeon_check_offset(dev_priv, payload[i])) {
DRM_ERROR
("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
k, i);
if (k == narrays)
break;
/* have one more to process, they come in pairs */
- if (r300_check_offset(dev_priv, payload[i])) {
+ if (!radeon_check_offset(dev_priv, payload[i])) {
DRM_ERROR
("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
k, i);
if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
| RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[2] << 10;
- ret = r300_check_offset(dev_priv, offset);
+ ret = !radeon_check_offset(dev_priv, offset);
if (ret) {
DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
return DRM_ERR(EINVAL);
if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
(cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[3] << 10;
- ret = r300_check_offset(dev_priv, offset);
+ ret = !radeon_check_offset(dev_priv, offset);
if (ret) {
DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
return DRM_ERR(EINVAL);
DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
return DRM_ERR(EINVAL);
}
- ret = r300_check_offset(dev_priv, cmd[2]);
+ ret = !radeon_check_offset(dev_priv, cmd[2]);
if (ret) {
DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
return DRM_ERR(EINVAL);
extern drm_ioctl_desc_t radeon_ioctls[];
extern int radeon_max_ioctl;
+/* Check whether the given hardware address is inside the framebuffer or the
+ * GART area.
+ */
+static __inline__ int radeon_check_offset(drm_radeon_private_t *dev_priv,
+ u64 off)
+{
+ u32 fb_start = dev_priv->fb_location;
+ u32 fb_end = fb_start + dev_priv->fb_size - 1;
+ u32 gart_start = dev_priv->gart_vm_start;
+ u32 gart_end = gart_start + dev_priv->gart_size - 1;
+
+ return ((off >= fb_start && off <= fb_end) ||
+ (off >= gart_start && off <= gart_end));
+}
+
/* radeon_cp.c */
extern int radeon_cp_init(DRM_IOCTL_ARGS);
extern int radeon_cp_start(DRM_IOCTL_ARGS);
-/* radeon_irq.c -- IRQ handling for radeon -*- linux-c -*-
- *
+/* radeon_irq.c -- IRQ handling for radeon -*- linux-c -*- */
+/*
* Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
-/* radeon_mem.c -- Simple GART/fb memory manager for radeon -*- linux-c -*-
- *
+/* radeon_mem.c -- Simple GART/fb memory manager for radeon -*- linux-c -*- */
+/*
* Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
u32 *offset)
{
u64 off = *offset;
- u32 fb_start = dev_priv->fb_location;
- u32 fb_end = fb_start + dev_priv->fb_size - 1;
- u32 gart_start = dev_priv->gart_vm_start;
- u32 gart_end = gart_start + dev_priv->gart_size - 1;
+ u32 fb_end = dev_priv->fb_location + dev_priv->fb_size - 1;
struct drm_radeon_driver_file_fields *radeon_priv;
/* Hrm ... the story of the offset ... So this function converts
/* First, the best case, the offset already lands in either the
* framebuffer or the GART mapped space
*/
- if ((off >= fb_start && off <= fb_end) ||
- (off >= gart_start && off <= gart_end))
+ if (radeon_check_offset(dev_priv, off))
return 0;
/* Ok, that didn't happen... now check if we have a zero based
/* Finally, assume we aimed at a GART offset if beyond the fb */
if (off > fb_end)
- off = off - fb_end - 1 + gart_start;
+ off = off - fb_end - 1 + dev_priv->gart_vm_start;
/* Now recheck and fail if out of bounds */
- if ((off >= fb_start && off <= fb_end) ||
- (off >= gart_start && off <= gart_end)) {
+ if (radeon_check_offset(dev_priv, off)) {
DRM_DEBUG("offset fixed up to 0x%x\n", (unsigned int)off);
*offset = off;
return 0;
event.count = savage_bci_emit_event(dev_priv, event.flags);
event.count |= dev_priv->event_wrap << 16;
- DRM_COPY_TO_USER_IOCTL(&((drm_savage_event_emit_t __user *) data)->
- count, event.count, sizeof(event.count));
+ DRM_COPY_TO_USER_IOCTL((drm_savage_event_emit_t __user *) data,
+ event, sizeof(event));
return 0;
}
hwrng_unregister(&amd_rng);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_AUTHOR("The Linux Kernel team");
iounmap(mem);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for AMD Geode LX CPUs");
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
+static __initdata int no_fwh_detect;
+module_param(no_fwh_detect, int, 0);
+MODULE_PARM_DESC(no_fwh_detect, "Skip FWH detection:\n"
+ " positive value - skip if FWH space locked read-only\n"
+ " negative value - skip always");
static inline u8 hwstatus_get(void __iomem *mem)
{
if (!dev)
goto out; /* Device not found. */
+ if (no_fwh_detect < 0) {
+ pci_dev_put(dev);
+ goto fwh_done;
+ }
+
/* Check for Intel 82802 */
if (dev->device < 0x2640) {
fwh_dec_en1_off = FWH_DEC_EN1_REG_OLD;
pci_read_config_byte(dev, fwh_dec_en1_off, &fwh_dec_en1_val);
pci_read_config_byte(dev, bios_cntl_off, &bios_cntl_val);
+ if ((bios_cntl_val &
+ (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
+ == BIOS_CNTL_LOCK_ENABLE_MASK) {
+ static __initdata /*const*/ char warning[] =
+ KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
+ KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
+ KERN_WARNING PFX "you are certain that your system has a functional\n"
+ KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+
+ pci_dev_put(dev);
+ if (no_fwh_detect)
+ goto fwh_done;
+ printk(warning);
+ err = -EBUSY;
+ goto out;
+ }
+
mem = ioremap_nocache(INTEL_FWH_ADDR, INTEL_FWH_ADDR_LEN);
if (mem == NULL) {
pci_dev_put(dev);
pci_write_config_byte(dev,
fwh_dec_en1_off,
fwh_dec_en1_val | FWH_F8_EN_MASK);
- if (!(bios_cntl_val &
- (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)))
+ if (!(bios_cntl_val & BIOS_CNTL_WRITE_ENABLE_MASK))
pci_write_config_byte(dev,
bios_cntl_off,
bios_cntl_val | BIOS_CNTL_WRITE_ENABLE_MASK);
goto out;
}
+fwh_done:
+
err = -ENOMEM;
mem = ioremap(INTEL_RNG_ADDR, INTEL_RNG_ADDR_LEN);
if (!mem)
iounmap(mem);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for Intel chipsets");
iounmap(rng_base);
}
-subsys_initcall(ixp4xx_rng_init);
+module_init(ixp4xx_rng_init);
module_exit(ixp4xx_rng_exit);
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
hwrng_unregister(&via_rng);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for VIA chipsets");
// code and returning.
//
#define COMPLETE(pB,code) \
- if(1){ \
+ do { \
pB->i2eError = code; \
return (code == I2EE_GOOD);\
- }
+ } while (0)
#endif // I2ELLIS_H
{
action_fn fn = (action_fn) kp->arg;
int rv = 0;
- char *dup, *s;
+ char valcp[16];
+ char *s;
- dup = kstrdup(val, GFP_KERNEL);
- if (!dup)
- return -ENOMEM;
+ strncpy(valcp, val, 16);
+ valcp[15] = '\0';
- s = strstrip(dup);
+ s = strstrip(valcp);
down_read(®ister_sem);
rv = fn(s, NULL);
out_unlock:
up_read(®ister_sem);
- kfree(dup);
return rv;
}
* it wants to talk.
*/
+static inline int WaitTillCardIsFree(u16 base)
+{
+ unsigned int count = 0;
+ unsigned int a = in_atomic(); /* do we run under spinlock? */
+
+ while (!(inw(base + 0xe) & 0x1) && count++ < 100)
+ if (a)
+ mdelay(1);
+ else
+ msleep(1);
+
+ return !(inw(base + 0xe) & 0x1);
+}
+
static int lock_card(struct isi_board *card)
{
char retries;
* ISI Card specific ops ...
*/
+/* card->lock HAS to be held */
static void raise_dtr(struct isi_port *port)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0504, base);
InterruptTheCard(base);
port->status |= ISI_DTR;
- unlock_card(card);
}
+/* card->lock HAS to be held */
static inline void drop_dtr(struct isi_port *port)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0404, base);
InterruptTheCard(base);
port->status &= ~ISI_DTR;
- unlock_card(card);
}
+/* card->lock HAS to be held */
static inline void raise_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0a04, base);
InterruptTheCard(base);
port->status |= ISI_RTS;
- unlock_card(card);
}
+
+/* card->lock HAS to be held */
static inline void drop_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0804, base);
InterruptTheCard(base);
port->status &= ~ISI_RTS;
- unlock_card(card);
}
+/* card->lock MUST NOT be held */
static inline void raise_dtr_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
unlock_card(card);
}
+/* card->lock HAS to be held */
static void drop_dtr_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0c04, base);
InterruptTheCard(base);
port->status &= ~(ISI_RTS | ISI_DTR);
- unlock_card(card);
-}
-
-static inline void kill_queue(struct isi_port *port, short queue)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (!lock_card(card))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw((queue << 8) | 0x06, base);
- InterruptTheCard(base);
- unlock_card(card);
}
/*
else
raise_dtr(port);
- if (lock_card(card)) {
+ if (WaitTillCardIsFree(base) == 0) {
outw(0x8000 | (channel << shift_count) |0x03, base);
outw(linuxb_to_isib[baud] << 8 | 0x03, base);
channel_setup = 0;
}
outw(channel_setup, base);
InterruptTheCard(base);
- unlock_card(card);
}
if (C_CLOCAL(tty))
port->flags &= ~ASYNC_CHECK_CD;
if (I_IXOFF(tty))
flow_ctrl |= ISICOM_INITIATE_XONXOFF;
- if (lock_card(card)) {
+ if (WaitTillCardIsFree(base) == 0) {
outw(0x8000 | (channel << shift_count) |0x04, base);
outw(flow_ctrl << 8 | 0x05, base);
outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
InterruptTheCard(base);
- unlock_card(card);
}
/* rx enabled -> enable port for rx on the card */
}
port = bp->ports;
bp->status |= BOARD_ACTIVE;
- spin_unlock_irqrestore(&bp->card_lock, flags);
for (channel = 0; channel < bp->port_count; channel++, port++)
drop_dtr_rts(port);
- return;
+ spin_unlock_irqrestore(&bp->card_lock, flags);
}
static int isicom_setup_port(struct isi_port *port)
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
/* discard any residual data */
- kill_queue(port, ISICOM_KILLTX | ISICOM_KILLRX);
+ if (WaitTillCardIsFree(card->base) == 0) {
+ outw(0x8000 | (port->channel << card->shift_count) | 0x02,
+ card->base);
+ outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
+ InterruptTheCard(card->base);
+ }
isicom_config_port(port);
port->flags |= ASYNC_INITIALIZED;
static inline void isicom_shutdown_board(struct isi_board *bp)
{
- unsigned long flags;
-
- spin_lock_irqsave(&bp->card_lock, flags);
if (bp->status & BOARD_ACTIVE) {
bp->status &= ~BOARD_ACTIVE;
}
- spin_unlock_irqrestore(&bp->card_lock, flags);
}
+/* card->lock HAS to be held */
static void isicom_shutdown_port(struct isi_port *port)
{
struct isi_board *card = port->card;
struct tty_struct *tty;
- unsigned long flags;
tty = port->tty;
- spin_lock_irqsave(&card->card_lock, flags);
- if (!(port->flags & ASYNC_INITIALIZED)) {
- spin_unlock_irqrestore(&card->card_lock, flags);
+ if (!(port->flags & ASYNC_INITIALIZED))
return;
- }
+
if (port->xmit_buf) {
free_page((unsigned long) port->xmit_buf);
port->xmit_buf = NULL;
port->flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
port->tty = NULL;
- spin_unlock_irqrestore(&card->card_lock, flags);
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
unsigned int set, unsigned int clear)
{
struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
return -ENODEV;
+ spin_lock_irqsave(&port->card->card_lock, flags);
if (set & TIOCM_RTS)
raise_rts(port);
if (set & TIOCM_DTR)
drop_rts(port);
if (clear & TIOCM_DTR)
drop_dtr(port);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
return 0;
}
(newinfo.flags & ASYNC_FLAGS));
}
if (reconfig_port) {
+ unsigned long flags;
+ spin_lock_irqsave(&port->card->card_lock, flags);
isicom_config_port(port);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
}
return 0;
}
struct ktermios *old_termios)
{
struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
return;
tty->termios->c_iflag == old_termios->c_iflag)
return;
+ spin_lock_irqsave(&port->card->card_lock, flags);
isicom_config_port(port);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
static void isicom_hangup(struct tty_struct *tty)
{
struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
return;
+ spin_lock_irqsave(&port->card->card_lock, flags);
isicom_shutdown_port(port);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
+
port->count = 0;
port->flags &= ~ASYNC_NORMAL_ACTIVE;
port->tty = NULL;
return retval;
}
-static inline int WaitTillCardIsFree(u16 base)
-{
- unsigned long count = 0;
-
- while (!(inw(base + 0xe) & 0x1) && count++ < 100)
- msleep(5);
-
- return !(inw(base + 0xe) & 0x1);
-}
-
static int __devinit load_firmware(struct pci_dev *pdev,
const unsigned int index, const unsigned int signature)
{
{
unsigned long pfn;
- /* Turn a pfn offset into an absolute pfn */
- pfn = PFN_DOWN(virt_to_phys((void *)PAGE_OFFSET)) + vma->vm_pgoff;
+ /* Turn a kernel-virtual address into a physical page frame */
+ pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
* RED-PEN: on some architectures there is more mapped memory
/* Initialize the tty_driver structure */
memset(mxvar_sdriver, 0, sizeof(struct tty_driver));
+ mxvar_sdriver->owner = THIS_MODULE;
mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
mxvar_sdriver->name = "ttyMI";
mxvar_sdriver->major = ttymajor;
MXSER_VERSION);
/* Initialize the tty_driver structure */
+ mxvar_sdriver->owner = THIS_MODULE;
mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
mxvar_sdriver->name = "ttyMI";
mxvar_sdriver->major = ttymajor;
#define hpet_set_rtc_irq_bit(arg) 0
#define hpet_rtc_timer_init() do { } while (0)
#define hpet_rtc_dropped_irq() 0
-static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) {return 0;}
+#ifdef RTC_IRQ
+static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
+{
+ return 0;
+}
+#endif
#else
extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
#endif
static void switchover_timeout(unsigned long data);
static struct timer_list switchover_timer =
TIMER_INITIALIZER(switchover_timeout , 0, 0);
+static unsigned long tlclk_timer_data;
static struct tlclk_alarms *alarm_events;
static DECLARE_WAIT_QUEUE_HEAD(wq);
+static unsigned long useflags;
+static DEFINE_MUTEX(tlclk_mutex);
+
static int tlclk_open(struct inode *inode, struct file *filp)
{
int result;
+ if (test_and_set_bit(0, &useflags))
+ return -EBUSY;
+ /* this legacy device is always one per system and it doesn't
+ * know how to handle multiple concurrent clients.
+ */
+
/* Make sure there is no interrupt pending while
* initialising interrupt handler */
inb(TLCLK_REG6);
static int tlclk_release(struct inode *inode, struct file *filp)
{
free_irq(telclk_interrupt, tlclk_interrupt);
+ clear_bit(0, &useflags);
return 0;
}
{
if (count < sizeof(struct tlclk_alarms))
return -EIO;
+ if (mutex_lock_interruptible(&tlclk_mutex))
+ return -EINTR;
+
wait_event_interruptible(wq, got_event);
- if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms)))
+ if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms))) {
+ mutex_unlock(&tlclk_mutex);
return -EFAULT;
+ }
memset(alarm_events, 0, sizeof(struct tlclk_alarms));
got_event = 0;
+ mutex_unlock(&tlclk_mutex);
return sizeof(struct tlclk_alarms);
}
-static ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
- loff_t *f_pos)
-{
- return 0;
-}
-
static const struct file_operations tlclk_fops = {
.read = tlclk_read,
- .write = tlclk_write,
.open = tlclk_open,
.release = tlclk_release,
SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
switch (val) {
case CLK_8_592MHz:
- SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
break;
case CLK_11_184MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
break;
case CLK_44_736MHz:
- SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
break;
}
} else
&tlclk_attribute_group);
if (ret) {
printk(KERN_ERR "tlclk: failed to create sysfs device attributes.\n");
- sysfs_remove_group(&tlclk_device->dev.kobj,
- &tlclk_attribute_group);
goto out5;
}
static void switchover_timeout(unsigned long data)
{
- if ((data & 1)) {
- if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ unsigned long flags = *(unsigned long *) data;
+
+ if ((flags & 1)) {
+ if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_primary++;
} else {
- if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_secondary++;
}
/* TIMEOUT in ~10ms */
switchover_timer.expires = jiffies + msecs_to_jiffies(10);
- switchover_timer.data = inb(TLCLK_REG1);
- add_timer(&switchover_timer);
+ tlclk_timer_data = inb(TLCLK_REG1);
+ switchover_timer.data = (unsigned long) &tlclk_timer_data;
+ mod_timer(&switchover_timer, switchover_timer.expires);
} else {
got_event = 1;
wake_up(&wq);
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
+#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_event.h>
atomic_t wait_flag;
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
{
int i;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
printk(VIOCONS_KERN_INFO "registering console\n");
for (i = 0; i < VTTY_PORTS; i++) {
port_info[i].lp = HvLpIndexInvalid;
#include <asm/uaccess.h>
#include <asm/ioctls.h>
-
+#include <asm/firmware.h>
#include <asm/vio.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
int ret;
struct proc_dir_entry *e;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
op_struct_list = NULL;
if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) {
printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n");
*
* Copyright (C) 2002 MontaVista Software Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
return data;
}
-static unsigned int startup_giuint_low_irq(unsigned int irq)
+static void ack_giuint_low(unsigned int irq)
{
- unsigned int pin;
-
- pin = GPIO_PIN_OF_IRQ(irq);
- giu_write(GIUINTSTATL, 1 << pin);
- giu_set(GIUINTENL, 1 << pin);
-
- return 0;
+ giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq));
}
-static void shutdown_giuint_low_irq(unsigned int irq)
+static void mask_giuint_low(unsigned int irq)
{
giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
}
-static void enable_giuint_low_irq(unsigned int irq)
-{
- giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-#define disable_giuint_low_irq shutdown_giuint_low_irq
-
-static void ack_giuint_low_irq(unsigned int irq)
+static void mask_ack_giuint_low(unsigned int irq)
{
unsigned int pin;
giu_write(GIUINTSTATL, 1 << pin);
}
-static void end_giuint_low_irq(unsigned int irq)
+static void unmask_giuint_low(unsigned int irq)
{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
+ giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
}
-static struct hw_interrupt_type giuint_low_irq_type = {
- .typename = "GIUINTL",
- .startup = startup_giuint_low_irq,
- .shutdown = shutdown_giuint_low_irq,
- .enable = enable_giuint_low_irq,
- .disable = disable_giuint_low_irq,
- .ack = ack_giuint_low_irq,
- .end = end_giuint_low_irq,
+static struct irq_chip giuint_low_irq_chip = {
+ .name = "GIUINTL",
+ .ack = ack_giuint_low,
+ .mask = mask_giuint_low,
+ .mask_ack = mask_ack_giuint_low,
+ .unmask = unmask_giuint_low,
};
-static unsigned int startup_giuint_high_irq(unsigned int irq)
+static void ack_giuint_high(unsigned int irq)
{
- unsigned int pin;
-
- pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET;
- giu_write(GIUINTSTATH, 1 << pin);
- giu_set(GIUINTENH, 1 << pin);
-
- return 0;
+ giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
}
-static void shutdown_giuint_high_irq(unsigned int irq)
+static void mask_giuint_high(unsigned int irq)
{
giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
}
-static void enable_giuint_high_irq(unsigned int irq)
-{
- giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-#define disable_giuint_high_irq shutdown_giuint_high_irq
-
-static void ack_giuint_high_irq(unsigned int irq)
+static void mask_ack_giuint_high(unsigned int irq)
{
unsigned int pin;
giu_write(GIUINTSTATH, 1 << pin);
}
-static void end_giuint_high_irq(unsigned int irq)
+static void unmask_giuint_high(unsigned int irq)
{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+ giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
}
-static struct hw_interrupt_type giuint_high_irq_type = {
- .typename = "GIUINTH",
- .startup = startup_giuint_high_irq,
- .shutdown = shutdown_giuint_high_irq,
- .enable = enable_giuint_high_irq,
- .disable = disable_giuint_high_irq,
- .ack = ack_giuint_high_irq,
- .end = end_giuint_high_irq,
+static struct irq_chip giuint_high_irq_chip = {
+ .name = "GIUINTH",
+ .ack = ack_giuint_high,
+ .mask = mask_giuint_high,
+ .mask_ack = mask_ack_giuint_high,
+ .unmask = unmask_giuint_high,
};
static int giu_get_irq(unsigned int irq)
break;
}
}
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_low_irq_chip,
+ handle_edge_irq);
} else {
giu_clear(GIUINTTYPL, mask);
giu_clear(GIUINTHTSELL, mask);
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_low_irq_chip,
+ handle_level_irq);
}
giu_write(GIUINTSTATL, mask);
} else if (pin < GIUINT_HIGH_MAX) {
break;
}
}
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_high_irq_chip,
+ handle_edge_irq);
} else {
giu_clear(GIUINTTYPH, mask);
giu_clear(GIUINTHTSELH, mask);
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_high_irq_chip,
+ handle_level_irq);
}
giu_write(GIUINTSTATH, mask);
}
static int __devinit giu_probe(struct platform_device *dev)
{
unsigned long start, size, flags = 0;
- unsigned int nr_pins = 0;
+ unsigned int nr_pins = 0, trigger, i, pin;
struct resource *res1, *res2 = NULL;
void *base;
- int retval, i;
+ struct irq_chip *chip;
+ int retval;
switch (current_cpu_data.cputype) {
case CPU_VR4111:
giu_write(GIUINTENL, 0);
giu_write(GIUINTENH, 0);
+ trigger = giu_read(GIUINTTYPH) << 16;
+ trigger |= giu_read(GIUINTTYPL);
for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
- if (i < GIU_IRQ(GIUINT_HIGH_OFFSET))
- irq_desc[i].chip = &giuint_low_irq_type;
+ pin = GPIO_PIN_OF_IRQ(i);
+ if (pin < GIUINT_HIGH_OFFSET)
+ chip = &giuint_low_irq_chip;
else
- irq_desc[i].chip = &giuint_high_irq_type;
+ chip = &giuint_high_irq_chip;
+
+ if (trigger & (1 << pin))
+ set_irq_chip_and_handler(i, chip, handle_edge_irq);
+ else
+ set_irq_chip_and_handler(i, chip, handle_level_irq);
+
}
return cascade_irq(GIUINT_IRQ, giu_get_irq);
#include <linux/init.h>
#include <linux/connector.h>
#include <asm/atomic.h>
+#include <asm/unaligned.h>
#include <linux/cn_proc.h>
ev = (struct proc_event*)msg->data;
get_seq(&msg->seq, &ev->cpu);
ktime_get_ts(&ts); /* get high res monotonic timestamp */
- ev->timestamp_ns = timespec_to_ns(&ts);
+ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
ev->what = PROC_EVENT_FORK;
ev->event_data.fork.parent_pid = task->real_parent->pid;
ev->event_data.fork.parent_tgid = task->real_parent->tgid;
ev = (struct proc_event*)msg->data;
get_seq(&msg->seq, &ev->cpu);
ktime_get_ts(&ts); /* get high res monotonic timestamp */
- ev->timestamp_ns = timespec_to_ns(&ts);
+ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
ev->what = PROC_EVENT_EXEC;
ev->event_data.exec.process_pid = task->pid;
ev->event_data.exec.process_tgid = task->tgid;
return;
get_seq(&msg->seq, &ev->cpu);
ktime_get_ts(&ts); /* get high res monotonic timestamp */
- ev->timestamp_ns = timespec_to_ns(&ts);
+ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id));
msg->ack = 0; /* not used */
ev = (struct proc_event*)msg->data;
get_seq(&msg->seq, &ev->cpu);
ktime_get_ts(&ts); /* get high res monotonic timestamp */
- ev->timestamp_ns = timespec_to_ns(&ts);
+ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
ev->what = PROC_EVENT_EXIT;
ev->event_data.exit.process_pid = task->pid;
ev->event_data.exit.process_tgid = task->tgid;
ev = (struct proc_event*)msg->data;
msg->seq = rcvd_seq;
ktime_get_ts(&ts); /* get high res monotonic timestamp */
- ev->timestamp_ns = timespec_to_ns(&ts);
+ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
ev->cpu = -1;
ev->what = PROC_EVENT_NONE;
ev->event_data.ack.err = err;
void cn_queue_wrapper(struct work_struct *work)
{
struct cn_callback_entry *cbq =
- container_of(work, struct cn_callback_entry, work.work);
+ container_of(work, struct cn_callback_entry, work);
struct cn_callback_data *d = &cbq->data;
d->callback(d->callback_priv);
memcpy(&cbq->id.id, id, sizeof(struct cb_id));
cbq->data.callback = callback;
- INIT_DELAYED_WORK(&cbq->work, &cn_queue_wrapper);
+ INIT_WORK(&cbq->work, &cn_queue_wrapper);
return cbq;
}
static void cn_queue_free_callback(struct cn_callback_entry *cbq)
{
- cancel_delayed_work(&cbq->work);
flush_workqueue(cbq->pdev->cn_queue);
kfree(cbq);
spin_lock_bh(&dev->cbdev->queue_lock);
list_for_each_entry(__cbq, &dev->cbdev->queue_list, callback_entry) {
if (cn_cb_equal(&__cbq->id.id, &msg->id)) {
- if (likely(!test_bit(WORK_STRUCT_PENDING,
- &__cbq->work.work.management) &&
+ if (likely(!work_pending(&__cbq->work) &&
__cbq->data.ddata == NULL)) {
__cbq->data.callback_priv = msg;
__cbq->data.ddata = data;
__cbq->data.destruct_data = destruct_data;
- if (queue_delayed_work(
- dev->cbdev->cn_queue,
- &__cbq->work, 0))
+ if (queue_work(dev->cbdev->cn_queue,
+ &__cbq->work))
err = 0;
} else {
struct cn_callback_data *d;
d->destruct_data = destruct_data;
d->free = __cbq;
- INIT_DELAYED_WORK(&__cbq->work,
- &cn_queue_wrapper);
+ INIT_WORK(&__cbq->work,
+ &cn_queue_wrapper);
- if (queue_delayed_work(
- dev->cbdev->cn_queue,
- &__cbq->work, 0))
+ if (queue_work(dev->cbdev->cn_queue,
+ &__cbq->work))
err = 0;
else {
kfree(__cbq);
stat = cpufreq_stats_table[freq->cpu];
if (!stat)
return 0;
+
old_index = freq_table_get_index(stat, freq->old);
new_index = freq_table_get_index(stat, freq->new);
if (old_index == new_index)
return 0;
+ if (old_index == -1 || new_index == -1)
+ return 0;
+
spin_lock(&cpufreq_stats_lock);
stat->last_index = new_index;
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
struct kobject kobj;
};
-#define get_efivar_entry(n) list_entry(n, struct efivar_entry, list)
-
struct efivar_attribute {
struct attribute attr;
ssize_t (*show) (struct efivar_entry *entry, char *buf);
static void efivar_release(struct kobject *kobj)
{
struct efivar_entry *var = container_of(kobj, struct efivar_entry, kobj);
- spin_lock(&efivars_lock);
- list_del(&var->list);
- spin_unlock(&efivars_lock);
kfree(var);
}
efivar_create(struct subsystem *sub, const char *buf, size_t count)
{
struct efi_variable *new_var = (struct efi_variable *)buf;
- struct efivar_entry *search_efivar = NULL;
+ struct efivar_entry *search_efivar, *n;
unsigned long strsize1, strsize2;
- struct list_head *pos, *n;
efi_status_t status = EFI_NOT_FOUND;
int found = 0;
/*
* Does this variable already exist?
*/
- list_for_each_safe(pos, n, &efivar_list) {
- search_efivar = get_efivar_entry(pos);
+ list_for_each_entry_safe(search_efivar, n, &efivar_list, list) {
strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
strsize2 = utf8_strsize(new_var->VariableName, 1024);
if (strsize1 == strsize2 &&
efivar_delete(struct subsystem *sub, const char *buf, size_t count)
{
struct efi_variable *del_var = (struct efi_variable *)buf;
- struct efivar_entry *search_efivar = NULL;
+ struct efivar_entry *search_efivar, *n;
unsigned long strsize1, strsize2;
- struct list_head *pos, *n;
efi_status_t status = EFI_NOT_FOUND;
int found = 0;
/*
* Does this variable already exist?
*/
- list_for_each_safe(pos, n, &efivar_list) {
- search_efivar = get_efivar_entry(pos);
+ list_for_each_entry_safe(search_efivar, n, &efivar_list, list) {
strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
strsize2 = utf8_strsize(del_var->VariableName, 1024);
if (strsize1 == strsize2 &&
spin_unlock(&efivars_lock);
return -EIO;
}
+ list_del(&search_efivar->list);
/* We need to release this lock before unregistering. */
spin_unlock(&efivars_lock);
-
efivar_unregister(search_efivar);
/* It's dead Jim.... */
static void __exit
efivars_exit(void)
{
- struct list_head *pos, *n;
+ struct efivar_entry *entry, *n;
- list_for_each_safe(pos, n, &efivar_list)
- efivar_unregister(get_efivar_entry(pos));
+ list_for_each_entry_safe(entry, n, &efivar_list, list) {
+ spin_lock(&efivars_lock);
+ list_del(&entry->list);
+ spin_unlock(&efivars_lock);
+ efivar_unregister(entry);
+ }
subsystem_unregister(&vars_subsys);
firmware_unregister(&efi_subsys);
config HID
tristate "Generic HID support"
+ depends on INPUT
default y
---help---
- Say Y here if you want generic HID support to connect keyboards,
- mice, joysticks, graphic tablets, or any other HID based devices
- to your computer. You also need to select particular types of
- HID devices you want to compile support for, in the particular
- driver menu (USB, Bluetooth)
+ A human interface device (HID) is a type of computer device that
+ interacts directly with and takes input from humans. The term "HID"
+ most commonly used to refer to the USB-HID specification, but other
+ devices (such as, but not strictly limited to, Bluetooth) are
+ designed using HID specification (this involves certain keyboards,
+ mice, tablets, etc). This option compiles into kernel the generic
+ HID layer code (parser, usages, etc.), which can then be used by
+ transport-specific HID implementation (like USB or Bluetooth).
+
+ For docs and specs, see http://www.usb.org/developers/hidpage/
+
+ If unsure, say Y
endmenu
#define DRIVER_VERSION "v2.6"
#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik"
-#define DRIVER_DESC "USB HID core driver"
+#define DRIVER_DESC "HID core driver"
#define DRIVER_LICENSE "GPL"
-/*
- * Module parameters.
- */
-
-static unsigned int hid_mousepoll_interval;
-module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
-MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
-
/*
* Register a new report for a device.
*/
for (i = 0; i < HID_REPORT_TYPES; i++)
INIT_LIST_HEAD(&device->report_enum[i].report_list);
- if (!(device->rdesc = (__u8 *)kmalloc(size, GFP_KERNEL))) {
+ if (!(device->rdesc = kmalloc(size, GFP_KERNEL))) {
kfree(device->collection);
kfree(device);
return NULL;
unsigned size = field->report_size;
unsigned n;
+ /* make sure the unused bits in the last byte are zeros */
+ if (count > 0 && size > 0)
+ data[(count*size-1)/8] = 0;
+
for (n = 0; n < count; n++) {
if (field->logical_minimum < 0) /* signed values */
implement(data, offset + n * size, size, s32ton(field->value[n], size));
}
#ifdef DEBUG_DATA
- printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un");
+ printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
#endif
n = 0; /* Normally report number is 0 */
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/kernel.h>
-#include <linux/usb/input.h>
#undef DEBUG
#define map_led(c) do { usage->code = c; usage->type = EV_LED; bit = input->ledbit; max = LED_MAX; } while (0)
#define map_abs_clear(c) do { map_abs(c); clear_bit(c, bit); } while (0)
+#define map_rel_clear(c) do { map_rel(c); clear_bit(c, bit); } while (0)
#define map_key_clear(c) do { map_key(c); clear_bit(c, bit); } while (0)
#ifdef CONFIG_USB_HIDINPUT_POWERBOOK
}
}
- map_key(code);
+ map_key_clear(code);
break;
case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
if (field->flags & HID_MAIN_ITEM_RELATIVE)
- map_rel(usage->hid & 0xf);
+ map_rel_clear(usage->hid & 0xf);
else
- map_abs(usage->hid & 0xf);
+ map_abs_clear(usage->hid & 0xf);
break;
case HID_GD_HATSWITCH:
break;
case HID_UP_LED:
- if (((usage->hid - 1) & 0xffff) >= LED_MAX)
- goto ignore;
- map_led((usage->hid - 1) & 0xffff);
+
+ switch (usage->hid & 0xffff) { /* HID-Value: */
+ case 0x01: map_led (LED_NUML); break; /* "Num Lock" */
+ case 0x02: map_led (LED_CAPSL); break; /* "Caps Lock" */
+ case 0x03: map_led (LED_SCROLLL); break; /* "Scroll Lock" */
+ case 0x04: map_led (LED_COMPOSE); break; /* "Compose" */
+ case 0x05: map_led (LED_KANA); break; /* "Kana" */
+ case 0x27: map_led (LED_SLEEP); break; /* "Stand-By" */
+ case 0x4c: map_led (LED_SUSPEND); break; /* "System Suspend" */
+ case 0x09: map_led (LED_MUTE); break; /* "Mute" */
+ case 0x4b: map_led (LED_MISC); break; /* "Generic Indicator" */
+ case 0x19: map_led (LED_MAIL); break; /* "Message Waiting" */
+ case 0x4d: map_led (LED_CHARGING); break; /* "External Power Connected" */
+
+ default: goto ignore;
+ }
break;
case HID_UP_DIGITIZER:
case 0x000: goto ignore;
case 0x034: map_key_clear(KEY_SLEEP); break;
case 0x036: map_key_clear(BTN_MISC); break;
+ case 0x040: map_key_clear(KEY_MENU); break;
case 0x045: map_key_clear(KEY_RADIO); break;
+
+ case 0x088: map_key_clear(KEY_PC); break;
+ case 0x089: map_key_clear(KEY_TV); break;
case 0x08a: map_key_clear(KEY_WWW); break;
+ case 0x08b: map_key_clear(KEY_DVD); break;
+ case 0x08c: map_key_clear(KEY_PHONE); break;
case 0x08d: map_key_clear(KEY_PROGRAM); break;
+ case 0x08e: map_key_clear(KEY_VIDEOPHONE); break;
+ case 0x08f: map_key_clear(KEY_GAMES); break;
+ case 0x090: map_key_clear(KEY_MEMO); break;
+ case 0x091: map_key_clear(KEY_CD); break;
+ case 0x092: map_key_clear(KEY_VCR); break;
+ case 0x093: map_key_clear(KEY_TUNER); break;
+ case 0x094: map_key_clear(KEY_EXIT); break;
case 0x095: map_key_clear(KEY_HELP); break;
+ case 0x096: map_key_clear(KEY_TAPE); break;
+ case 0x097: map_key_clear(KEY_TV2); break;
+ case 0x098: map_key_clear(KEY_SAT); break;
+
case 0x09c: map_key_clear(KEY_CHANNELUP); break;
case 0x09d: map_key_clear(KEY_CHANNELDOWN); break;
+ case 0x0a0: map_key_clear(KEY_VCR2); break;
+
case 0x0b0: map_key_clear(KEY_PLAY); break;
case 0x0b1: map_key_clear(KEY_PAUSE); break;
case 0x0b2: map_key_clear(KEY_RECORD); break;
case 0x0b6: map_key_clear(KEY_PREVIOUSSONG); break;
case 0x0b7: map_key_clear(KEY_STOPCD); break;
case 0x0b8: map_key_clear(KEY_EJECTCD); break;
+
case 0x0cd: map_key_clear(KEY_PLAYPAUSE); break;
case 0x0e0: map_abs_clear(ABS_VOLUME); break;
case 0x0e2: map_key_clear(KEY_MUTE); break;
case 0x0e9: map_key_clear(KEY_VOLUMEUP); break;
case 0x0ea: map_key_clear(KEY_VOLUMEDOWN); break;
case 0x183: map_key_clear(KEY_CONFIG); break;
+ case 0x184: map_key_clear(KEY_WORDPROCESSOR); break;
+ case 0x185: map_key_clear(KEY_EDITOR); break;
+ case 0x186: map_key_clear(KEY_SPREADSHEET); break;
+ case 0x187: map_key_clear(KEY_GRAPHICSEDITOR); break;
+ case 0x188: map_key_clear(KEY_PRESENTATION); break;
+ case 0x189: map_key_clear(KEY_DATABASE); break;
case 0x18a: map_key_clear(KEY_MAIL); break;
+ case 0x18b: map_key_clear(KEY_NEWS); break;
+ case 0x18c: map_key_clear(KEY_VOICEMAIL); break;
+ case 0x18d: map_key_clear(KEY_ADDRESSBOOK); break;
+ case 0x18e: map_key_clear(KEY_CALENDAR); break;
+ case 0x191: map_key_clear(KEY_FINANCE); break;
case 0x192: map_key_clear(KEY_CALC); break;
case 0x194: map_key_clear(KEY_FILE); break;
+ case 0x196: map_key_clear(KEY_WWW); break;
+ case 0x19e: map_key_clear(KEY_COFFEE); break;
+ case 0x1a6: map_key_clear(KEY_HELP); break;
case 0x1a7: map_key_clear(KEY_DOCUMENTS); break;
+ case 0x1bc: map_key_clear(KEY_MESSENGER); break;
+ case 0x1bd: map_key_clear(KEY_INFO); break;
case 0x201: map_key_clear(KEY_NEW); break;
+ case 0x202: map_key_clear(KEY_OPEN); break;
+ case 0x203: map_key_clear(KEY_CLOSE); break;
+ case 0x204: map_key_clear(KEY_EXIT); break;
case 0x207: map_key_clear(KEY_SAVE); break;
case 0x208: map_key_clear(KEY_PRINT); break;
case 0x209: map_key_clear(KEY_PROPS); break;
case 0x226: map_key_clear(KEY_STOP); break;
case 0x227: map_key_clear(KEY_REFRESH); break;
case 0x22a: map_key_clear(KEY_BOOKMARKS); break;
+ case 0x22d: map_key_clear(KEY_ZOOMIN); break;
+ case 0x22e: map_key_clear(KEY_ZOOMOUT); break;
+ case 0x22f: map_key_clear(KEY_ZOOMRESET); break;
case 0x233: map_key_clear(KEY_SCROLLUP); break;
case 0x234: map_key_clear(KEY_SCROLLDOWN); break;
- case 0x238: map_rel(REL_HWHEEL); break;
+ case 0x238: map_rel_clear(REL_HWHEEL); break;
+ case 0x25f: map_key_clear(KEY_CANCEL); break;
case 0x279: map_key_clear(KEY_REDO); break;
+
case 0x289: map_key_clear(KEY_REPLY); break;
case 0x28b: map_key_clear(KEY_FORWARDMAIL); break;
case 0x28c: map_key_clear(KEY_SEND); break;
case 110: /* Intel Conroe */
/* compute in uV, round to mV */
val &= 0xff;
- if(((val & 0x7e) == 0xfe) || (!(val & 0x7e)))
+ if (val < 0x02 || val > 0xb2)
return 0;
return((1600000 - (val - 2) * 6250 + 500) / 1000);
case 24: /* Opteron processor */
/* Low Bits of Vcore A/B Vtt Read/High/Low */
static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+static u8 scale_in_add[] = { 0, 0, 0, 0, 0, 0, 0, 150, 150, 0 };
#define W83793_REG_FAN(index) (0x23 + 2 * (index)) /* High byte */
#define W83793_REG_FAN_MIN(index) (0x90 + 2 * (index)) /* High byte */
u8 temp_fan_map[6]; /* Temp controls which pwm fan, bit field */
u8 has_pwm;
+ u8 has_temp;
+ u8 has_vid;
u8 pwm_enable; /* Register value, each Temp has 1 bit */
u8 pwm_uptime; /* Register value */
u8 pwm_downtime; /* Register value */
each has 4 mode:(2 bits)
0: Stop monitor
1: Use internal temp sensor(default)
- 2: Use sensor in AMD CPU and get result by AMDSI
+ 2: Reserved
3: Use sensor in Intel CPU and get result by PECI
TR1-TR2
1: To enable temp sensors monitor
*/
-/* 0 disable, 5 AMDSI, 6 PECI */
-static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+/* 0 disable, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 0, 6 };
static ssize_t
show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
u8 val = simple_strtoul(buf, NULL, 10);
/* transform the sysfs interface values into table above */
- if ((val == 5 || val == 6) && (index < 4)) {
+ if ((val == 6) && (index < 4)) {
val -= 3;
} else if ((val == 3 && index < 4)
- || (val == 4 && index >= 4)
- || val == 0) {
+ || (val == 4 && index >= 4)) {
/* transform diode or thermistor into internal enable */
val = !!val;
} else {
val <<= 2;
val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
}
- return sprintf(buf, "%d\n", val * scale_in[index]);
+ /* voltage inputs 5VDD and 5VSB needs 150mV offset */
+ val = val * scale_in[index] + scale_in_add[index];
+ return sprintf(buf, "%d\n", val);
}
static ssize_t
scale_in[index] / 2) / scale_in[index];
mutex_lock(&data->update_lock);
if (index > 2) {
+ /* fix the limit values of 5VDD and 5VSB to ALARM mechanism */
+ if (1 == nr || 2 == nr) {
+ val -= scale_in_add[index] / scale_in[index];
+ }
val = SENSORS_LIMIT(val, 0, 255);
} else {
val = SENSORS_LIMIT(val, 0, 0x3FF);
SENSOR_ATTR_IN(7),
SENSOR_ATTR_IN(8),
SENSOR_ATTR_IN(9),
- SENSOR_ATTR_TEMP(1),
- SENSOR_ATTR_TEMP(2),
- SENSOR_ATTR_TEMP(3),
- SENSOR_ATTR_TEMP(4),
- SENSOR_ATTR_TEMP(5),
- SENSOR_ATTR_TEMP(6),
SENSOR_ATTR_FAN(1),
SENSOR_ATTR_FAN(2),
SENSOR_ATTR_FAN(3),
SENSOR_ATTR_PWM(3),
};
+static struct sensor_device_attribute_2 w83793_temp[] = {
+ SENSOR_ATTR_TEMP(1),
+ SENSOR_ATTR_TEMP(2),
+ SENSOR_ATTR_TEMP(3),
+ SENSOR_ATTR_TEMP(4),
+ SENSOR_ATTR_TEMP(5),
+ SENSOR_ATTR_TEMP(6),
+};
+
/* Fan6-Fan12 */
static struct sensor_device_attribute_2 w83793_left_fan[] = {
SENSOR_ATTR_FAN(6),
SENSOR_ATTR_PWM(8),
};
-static struct sensor_device_attribute_2 sda_single_files[] = {
+static struct sensor_device_attribute_2 w83793_vid[] = {
SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
NOT_USED, NOT_USED),
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
device_remove_file(dev, &sda_single_files[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+ device_remove_file(dev, &w83793_vid[i].dev_attr);
+
for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
device_remove_file(dev, &w83793_left_fan[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+ device_remove_file(dev, &w83793_temp[i].dev_attr);
}
if ((err = i2c_detach_client(client)))
struct w83793_data *data;
int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+ int files_temp = ARRAY_SIZE(w83793_temp) / 6;
int err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
data->has_pwm |= 0x80;
}
+ tmp = w83793_read_value(client, W83793_REG_FANIN_SEL);
+ if ((tmp & 0x01) && (val & 0x08)) { /* fan 9, second location */
+ data->has_fan |= 0x100;
+ }
+ if ((tmp & 0x02) && (val & 0x10)) { /* fan 10, second location */
+ data->has_fan |= 0x200;
+ }
+ if ((tmp & 0x04) && (val & 0x20)) { /* fan 11, second location */
+ data->has_fan |= 0x400;
+ }
+ if ((tmp & 0x08) && (val & 0x40)) { /* fan 12, second location */
+ data->has_fan |= 0x800;
+ }
+
+ /* check the temp1-6 mode, ignore former AMDSI selected inputs */
+ tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[0]);
+ if (tmp & 0x01)
+ data->has_temp |= 0x01;
+ if (tmp & 0x04)
+ data->has_temp |= 0x02;
+ if (tmp & 0x10)
+ data->has_temp |= 0x04;
+ if (tmp & 0x40)
+ data->has_temp |= 0x08;
+
+ tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[1]);
+ if (tmp & 0x01)
+ data->has_temp |= 0x10;
+ if (tmp & 0x02)
+ data->has_temp |= 0x20;
+
+ /* Detect the VID usage and ignore unused input */
+ tmp = w83793_read_value(client, W83793_REG_MFC);
+ if (!(tmp & 0x29))
+ data->has_vid |= 0x1; /* has VIDA */
+ if (tmp & 0x80)
+ data->has_vid |= 0x2; /* has VIDB */
+
/* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
err = device_create_file(dev,
goto exit_remove;
}
+ for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) {
+ if (!(data->has_vid & (1 << i)))
+ continue;
+ err = device_create_file(dev, &w83793_vid[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = device_create_file(dev, &sda_single_files[i].dev_attr);
if (err)
}
+ for (i = 0; i < 6; i++) {
+ int j;
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ for (j = 0; j < files_temp; j++) {
+ err = device_create_file(dev,
+ &w83793_temp[(i) * files_temp
+ + j].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
for (i = 5; i < 12; i++) {
int j;
if (!(data->has_fan & (1 << i)))
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
device_remove_file(dev, &sda_single_files[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+ device_remove_file(dev, &w83793_vid[i].dev_attr);
+
for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
device_remove_file(dev, &w83793_left_fan[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+ device_remove_file(dev, &w83793_temp[i].dev_attr);
+
if (data->lm75[0] != NULL) {
i2c_detach_client(data->lm75[0]);
kfree(data->lm75[0]);
}
for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
data->temp_fan_map[i] =
w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
for (j = 1; j < 5; j++) {
w83793_read_value(client, W83793_REG_FAN(i) + 1);
}
- for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
data->temp[i][TEMP_READ] =
w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
+ }
data->temp_low_bits =
w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
data->alarms[i] =
w83793_read_value(client, W83793_REG_ALARM(i));
- data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
- data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
+ if (data->has_vid & 0x01)
+ data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
+ if (data->has_vid & 0x02)
+ data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
w83793_update_nonvolatile(dev);
data->last_updated = jiffies;
data->valid = 1;
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
-config I2C_PNX_EARLY
- bool "Early initialization for I2C on PNXxxxx"
- depends on I2C_PNX=y
- help
- Under certain circumstances one may need to make sure I2C on PNXxxxx
- is initialized earlier than some other driver that depends on it
- (for instance, that might be USB in case of PNX4008). With this
- option turned on you can guarantee that.
-
endmenu
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
+ mv64xxx_i2c_hw_init(drv_data);
+
if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
MV64XXX_I2C_CTLR_NAME, drv_data)) {
dev_err(&drv_data->adapter.dev,
goto exit_free_irq;
}
- mv64xxx_i2c_hw_init(drv_data);
-
return 0;
exit_free_irq:
return 0;
}
-static irqreturn_t
-i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
{
u32 stat, ctl;
struct i2c_adapter *adap = dev_id;
MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_I2C_PNX_EARLY
/* We need to make sure I2C is initialized before USB */
subsys_initcall(i2c_adap_pnx_init);
-#else
-mudule_init(i2c_adap_pnx_init);
-#endif
module_exit(i2c_adap_pnx_exit);
buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f);
buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f);
buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f);
+ buf[m41t00_chip->year] = year;
if (i2c_master_send(save_client, wbuf, 9) < 0)
dev_err(&save_client->dev, "m41t00_set: Write error\n");
.bus = &i2c_bus_type,
};
+/* ------------------------------------------------------------------------- */
+
+/* I2C bus adapters -- one roots each I2C or SMBUS segment */
+
static void i2c_adapter_class_dev_release(struct class_device *dev)
{
struct i2c_adapter *adap = class_dev_to_i2c_adapter(dev);
complete(&adap->class_dev_released);
}
+static ssize_t i2c_adapter_show_name(struct class_device *cdev, char *buf)
+{
+ struct i2c_adapter *adap = class_dev_to_i2c_adapter(cdev);
+ return sprintf(buf, "%s\n", adap->name);
+}
+
+static struct class_device_attribute i2c_adapter_attrs[] = {
+ __ATTR(name, S_IRUGO, i2c_adapter_show_name, NULL),
+ { },
+};
+
struct class i2c_adapter_class = {
- .owner = THIS_MODULE,
- .name = "i2c-adapter",
- .release = &i2c_adapter_class_dev_release,
+ .owner = THIS_MODULE,
+ .name = "i2c-adapter",
+ .class_dev_attrs = i2c_adapter_attrs,
+ .release = &i2c_adapter_class_dev_release,
};
static ssize_t show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
* If the parent pointer is not set up,
* we add this adapter to the host bus.
*/
- if (adap->dev.parent == NULL)
+ if (adap->dev.parent == NULL) {
adap->dev.parent = &platform_bus;
+ printk(KERN_WARNING "**WARNING** I2C adapter driver [%s] "
+ "forgot to specify physical device; fix it!\n",
+ adap->name);
+ }
sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
adap->dev.driver = &i2c_adapter_driver;
adap->dev.release = &i2c_adapter_dev_release;
{
pnp_register_driver(&idepnp_driver);
}
+
+void __exit pnpide_exit(void)
+{
+ pnp_unregister_driver(&idepnp_driver);
+}
}
extern void pnpide_init(void);
+extern void pnpide_exit(void);
extern void h8300_ide_init(void);
/*
for (index = 0; index < MAX_HWIFS; ++index)
ide_unregister(index);
+#ifdef CONFIG_BLK_DEV_IDEPNP
+ pnpide_exit();
+#endif
+
#ifdef CONFIG_PROC_FS
proc_ide_destroy();
#endif
.probe = aec62xx_init_one,
};
-static int aec62xx_ide_init(void)
+static int __init aec62xx_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = alim15x3_init_one,
};
-static int ali15x3_ide_init(void)
+static int __init ali15x3_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = amd74xx_probe,
};
-static int amd74xx_ide_init(void)
+static int __init amd74xx_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
static int save_mdma_mode[4];
+static DEFINE_SPINLOCK(atiixp_lock);
+
/**
* atiixp_ratemask - compute rate mask for ATIIXP IDE
* @drive: IDE drive to compute for
unsigned long flags;
u16 tmp16;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&atiixp_lock, flags);
pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
if (save_mdma_mode[drive->dn])
tmp16 |= (1 << drive->dn);
pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
return __ide_dma_host_on(drive);
}
unsigned long flags;
u16 tmp16;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&atiixp_lock, flags);
pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
tmp16 &= ~(1 << drive->dn);
pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
return __ide_dma_host_off(drive);
}
u32 pio_timing_data;
u16 pio_mode_data;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&atiixp_lock, flags);
pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
pio_mode_data &= ~(0x07 << (drive->dn * 4));
(pio_timing[pio].command_width << (timing_shift + 4));
pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
}
/**
speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed);
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&atiixp_lock, flags);
save_mdma_mode[drive->dn] = 0;
if (speed >= XFER_UDMA_0) {
}
}
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
if (speed >= XFER_SW_DMA_0)
pio = atiixp_dma_2_pio(speed);
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
+ u8 udma_mode = 0;
+ u8 ch = hwif->channel;
+ struct pci_dev *pdev = hwif->pci_dev;
+
if (!hwif->irq)
- hwif->irq = hwif->channel ? 15 : 14;
+ hwif->irq = ch ? 15 : 14;
hwif->autodma = 0;
hwif->tuneproc = &atiixp_tuneproc;
hwif->mwdma_mask = 0x06;
hwif->swdma_mask = 0x04;
- /* FIXME: proper cable detection needed */
- hwif->udma_four = 1;
+ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+ if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+ hwif->udma_four = 1;
+ else
+ hwif->udma_four = 0;
+
hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
hwif->ide_dma_check = &atiixp_dma_check;
hwif->drives[0].autodma = hwif->autodma;
}
-static void __devinit init_hwif_sb600_legacy(ide_hwif_t *hwif)
-{
-
- hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x7f;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
-
- if (!noautodma)
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
-}
static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
{ /* 0 */
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.bootable = ON_BOARD,
},{ /* 1 */
- .name = "ATI SB600 SATA Legacy IDE",
- .init_hwif = init_hwif_sb600_legacy,
- .channels = 2,
+ .name = "SB600_PATA",
+ .init_hwif = init_hwif_atiixp,
+ .channels = 1,
.autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
+ .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
+ .bootable = ON_BOARD,
+ },
};
/**
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
.probe = atiixp_init_one,
};
-static int atiixp_ide_init(void)
+static int __init atiixp_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = cmd64x_init_one,
};
-static int cmd64x_ide_init(void)
+static int __init cmd64x_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = cs5520_init_one,
};
-static int cs5520_ide_init(void)
+static int __init cs5520_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = cs5530_init_one,
};
-static int cs5530_ide_init(void)
+static int __init cs5530_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = cy82c693_init_one,
};
-static int cy82c693_ide_init(void)
+static int __init cy82c693_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
- },{ /* 15 */
- .name = "JMB361",
- .init_hwif = init_hwif_generic,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = OFF_BOARD,
- },{ /* 16 */
- .name = "JMB363",
- .init_hwif = init_hwif_generic,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = OFF_BOARD,
- },{ /* 17 */
- .name = "JMB365",
- .init_hwif = init_hwif_generic,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = OFF_BOARD,
- },{ /* 18 */
- .name = "JMB366",
- .init_hwif = init_hwif_generic,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = OFF_BOARD,
- },{ /* 19 */
- .name = "JMB368",
- .init_hwif = init_hwif_generic,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = OFF_BOARD,
}
};
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
/* Must come last. If you add entries adjust this table appropriately and the init_one code */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
{ 0, },
.probe = generic_init_one,
};
-static int generic_ide_init(void)
+static int __init generic_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = hpt34x_init_one,
};
-static int hpt34x_ide_init(void)
+static int __init hpt34x_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = hpt366_init_one,
};
-static int hpt366_ide_init(void)
+static int __init hpt366_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
return 0;
return 1;
case PORT_SATA:
- return 1;
+ break;
}
+ return 1; /* Avoid bogus "control reaches end of non-void function" */
}
static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted)
.probe = ns87415_init_one,
};
-static int ns87415_ide_init(void)
+static int __init ns87415_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = opti621_init_one,
};
-static int opti621_ide_init(void)
+static int __init opti621_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = pdc202new_init_one,
};
-static int pdc202new_ide_init(void)
+static int __init pdc202new_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = pdc202xx_init_one,
};
-static int pdc202xx_ide_init(void)
+static int __init pdc202xx_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
/*
- * linux/drivers/ide/pci/piix.c Version 0.44 March 20, 2003
+ * linux/drivers/ide/pci/piix.c Version 0.45 May 12, 2006
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
- * PIO mode setting function for Intel chipsets.
+ * PIO mode setting function for Intel chipsets.
* For use instead of BIOS settings.
*
* 40-41
* sitre = word42 & 0x4000; secondary
*
* 44 8421|8421 hdd|hdb
- *
+ *
* 48 8421 hdd|hdc|hdb|hda udma enabled
*
* 0001 hda
return (ide_config_drive_speed(drive, speed));
}
-/**
- * piix_faulty_dma0 - check for DMA0 errata
- * @hwif: IDE interface to check
- *
- * If an ICH/ICH0/ICH2 interface is is operating in multi-word
- * DMA mode with 600nS cycle time the IDE PIO prefetch buffer will
- * inadvertently provide an extra piece of secondary data to the primary
- * device resulting in data corruption.
- *
- * With such a device this test function returns true. This allows
- * our tuning code to follow Intel recommendations and use PIO on
- * such devices.
- */
-
-static int piix_faulty_dma0(ide_hwif_t *hwif)
-{
- switch(hwif->pci_dev->device)
- {
- case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */
- case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */
- case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */
- case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */
- return 1;
- }
- return 0;
-}
-
/**
* piix_config_drive_for_dma - configure drive for DMA
* @drive: IDE drive to configure
*
* Set up a PIIX interface channel for the best available speed.
- * We prefer UDMA if it is available and then MWDMA. If DMA is
- * not available we switch to PIO and return 0.
+ * We prefer UDMA if it is available and then MWDMA. If DMA is
+ * not available we switch to PIO and return 0.
*/
static int piix_config_drive_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, piix_ratemask(drive));
-
- /* Some ICH devices cannot support DMA mode 0 */
- if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive)))
- speed = 0;
-
- /* If no DMA speed was available or the chipset has DMA bugs
- then disable DMA and use PIO */
-
- if (!speed || no_piix_dma) {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = piix_dma_2_pio(XFER_PIO_0 + tspeed);
- }
+
+ /*
+ * If no DMA speed was available or the chipset has DMA bugs
+ * then disable DMA and use PIO
+ */
+ if (!speed || no_piix_dma)
+ return 0;
(void) piix_tune_chipset(drive, speed);
return ide_dma_enable(drive);
if ((id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (piix_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && piix_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
/* Find best PIO mode. */
- hwif->tuneproc(drive, 255);
+ (void) hwif->speedproc(drive, XFER_PIO_0 +
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
.probe = rz1000_init_one,
};
-static int rz1000_ide_init(void)
+static int __init rz1000_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
#endif
};
-static int sc1200_ide_init(void)
+static int __init sc1200_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = svwks_init_one,
};
-static int svwks_ide_init(void)
+static int __init svwks_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
/* .is_remove = ioc4_ide_remove_one, */
};
-static int __devinit
-ioc4_ide_init(void)
+static int __init ioc4_ide_init(void)
{
return ioc4_register_submodule(&ioc4_ide_submodule);
}
.probe = siimage_init_one,
};
-static int siimage_ide_init(void)
+static int __init siimage_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = sis5513_init_one,
};
-static int sis5513_ide_init(void)
+static int __init sis5513_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = sl82c105_init_one,
};
-static int sl82c105_ide_init(void)
+static int __init sl82c105_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002
+ * linux/drivers/ide/pci/slc90e66.c Version 0.12 May 12, 2006
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
*
- * This a look-a-like variation of the ICH0 PIIX4 Ultra-66,
+ * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
* but this keeps the ISA-Bridge and slots alive.
*
*/
{
u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive));
- if (!(speed)) {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed);
- }
+ if (!speed)
+ return 0;
(void) slc90e66_tune_chipset(drive, speed);
return ide_dma_enable(drive);
if (id && (id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (slc90e66_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
- hwif->tuneproc(drive, 5);
+ (void) hwif->speedproc(drive, XFER_PIO_0 +
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
.probe = slc90e66_init_one,
};
-static int slc90e66_ide_init(void)
+static int __init slc90e66_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = triflex_init_one,
};
-static int triflex_ide_init(void)
+static int __init triflex_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
.probe = trm290_init_one,
};
-static int trm290_ide_init(void)
+static int __init trm290_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "cx7000", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
{
struct pci_dev *dev = hwif->pci_dev;
- struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
u8 t;
if (~vdev->via_config->flags & VIA_BAD_AST) {
static int via_set_drive(ide_drive_t *drive, u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
- struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
struct ide_timing t, p;
unsigned int T, UT;
static int via82cxxx_ide_dma_check (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
u16 w80 = hwif->udma_four;
u16 speed = ide_find_best_mode(drive,
return via_config;
}
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
+{
+ int i;
+
+ switch (vdev->via_config->flags & VIA_UDMA) {
+ case VIA_UDMA_66:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> (i & 16)) & 8) &&
+ ((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 2)) {
+ /*
+ * 2x PCI clock and
+ * UDMA w/ < 3T/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_100:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 4))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_133:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 6))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+ }
+}
+
/**
* init_chipset_via82cxxx - initialization handler
* @dev: PCI device
static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
{
struct pci_dev *isa = NULL;
+ struct via82cxxx_dev *vdev;
struct via_isa_bridge *via_config;
u8 t, v;
- unsigned int u;
+ u32 u;
+
+ vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+ if (!vdev) {
+ printk(KERN_ERR "VP_IDE: out of memory :(\n");
+ return -ENOMEM;
+ }
+ pci_set_drvdata(dev, vdev);
/*
* Find the ISA bridge to see how good the IDE is.
*/
- via_config = via_config_find(&isa);
+ vdev->via_config = via_config = via_config_find(&isa);
/* We checked this earlier so if it fails here deeep badness
is involved */
BUG_ON(!via_config->id);
/*
- * Setup or disable Clk66 if appropriate
+ * Detect cable and configure Clk66
*/
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+ via_cable_detect(vdev, u);
if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
/* Enable Clk66 */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
} else if (via_config->flags & VIA_BAD_CLK66) {
/* Would cause trouble on 596a and 686 */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
}
return 0;
}
-/*
- * Check and handle 80-wire cable presence
- */
-static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev)
-{
- unsigned int u;
- int i;
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-
- switch (vdev->via_config->flags & VIA_UDMA) {
-
- case VIA_UDMA_66:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> (i & 16)) & 8) &&
- ((u >> i) & 0x20) &&
- (((u >> i) & 7) < 2)) {
- /*
- * 2x PCI clock and
- * UDMA w/ < 3T/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case VIA_UDMA_100:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 4))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case VIA_UDMA_133:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 6))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- }
-}
-
static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
{
- struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev),
- GFP_KERNEL);
- struct pci_dev *isa = NULL;
+ struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
int i;
- if (vdev == NULL) {
- printk(KERN_ERR "VP_IDE: out of memory :(\n");
- return;
- }
-
- memset(vdev, 0, sizeof(struct via82cxxx_dev));
- ide_set_hwifdata(hwif, vdev);
-
- vdev->via_config = via_config_find(&isa);
- via_cable_detect(hwif->pci_dev, vdev);
-
hwif->autodma = 0;
hwif->tuneproc = &via82cxxx_tune_drive;
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, via_pci_tbl);
.probe = via_init_one,
};
-static int via_ide_init(void)
+static int __init via_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return -ENOMEM;
}
- cmd->command_orb_dma = dma_map_single(&hi->host->device,
+ cmd->command_orb_dma = dma_map_single(hi->host->device.parent,
&cmd->command_orb,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- cmd->sge_dma = dma_map_single(&hi->host->device,
+ cmd->sge_dma = dma_map_single(hi->host->device.parent,
&cmd->scatter_gather_element,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
if (!list_empty(&lu->cmd_orb_completed))
list_for_each_safe(lh, next, &lu->cmd_orb_completed) {
cmd = list_entry(lh, struct sbp2_command_info, list);
- dma_unmap_single(&host->device, cmd->command_orb_dma,
+ dma_unmap_single(host->device.parent,
+ cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- dma_unmap_single(&host->device, cmd->sge_dma,
+ dma_unmap_single(host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
kfree(cmd);
if (cmd->cmd_dma) {
if (cmd->dma_type == CMD_DMA_SINGLE)
- dma_unmap_single(&host->device, cmd->cmd_dma,
+ dma_unmap_single(host->device.parent, cmd->cmd_dma,
cmd->dma_size, cmd->dma_dir);
else if (cmd->dma_type == CMD_DMA_PAGE)
- dma_unmap_page(&host->device, cmd->cmd_dma,
+ dma_unmap_page(host->device.parent, cmd->cmd_dma,
cmd->dma_size, cmd->dma_dir);
/* XXX: Check for CMD_DMA_NONE bug */
cmd->dma_type = CMD_DMA_NONE;
cmd->cmd_dma = 0;
}
if (cmd->sge_buffer) {
- dma_unmap_sg(&host->device, cmd->sge_buffer,
+ dma_unmap_sg(host->device.parent, cmd->sge_buffer,
cmd->dma_size, cmd->dma_dir);
cmd->sge_buffer = NULL;
}
struct sbp2_fwhost_info *hi = lu->hi;
int error;
- lu->login_response = dma_alloc_coherent(&hi->host->device,
+ lu->login_response = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_login_response),
&lu->login_response_dma, GFP_KERNEL);
if (!lu->login_response)
goto alloc_fail;
- lu->query_logins_orb = dma_alloc_coherent(&hi->host->device,
+ lu->query_logins_orb = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_query_logins_orb),
&lu->query_logins_orb_dma, GFP_KERNEL);
if (!lu->query_logins_orb)
goto alloc_fail;
- lu->query_logins_response = dma_alloc_coherent(&hi->host->device,
+ lu->query_logins_response = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_query_logins_response),
&lu->query_logins_response_dma, GFP_KERNEL);
if (!lu->query_logins_response)
goto alloc_fail;
- lu->reconnect_orb = dma_alloc_coherent(&hi->host->device,
+ lu->reconnect_orb = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_reconnect_orb),
&lu->reconnect_orb_dma, GFP_KERNEL);
if (!lu->reconnect_orb)
goto alloc_fail;
- lu->logout_orb = dma_alloc_coherent(&hi->host->device,
+ lu->logout_orb = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_logout_orb),
&lu->logout_orb_dma, GFP_KERNEL);
if (!lu->logout_orb)
goto alloc_fail;
- lu->login_orb = dma_alloc_coherent(&hi->host->device,
+ lu->login_orb = dma_alloc_coherent(hi->host->device.parent,
sizeof(struct sbp2_login_orb),
&lu->login_orb_dma, GFP_KERNEL);
if (!lu->login_orb)
list_del(&lu->lu_list);
if (lu->login_response)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_login_response),
lu->login_response,
lu->login_response_dma);
if (lu->login_orb)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_login_orb),
lu->login_orb,
lu->login_orb_dma);
if (lu->reconnect_orb)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_reconnect_orb),
lu->reconnect_orb,
lu->reconnect_orb_dma);
if (lu->logout_orb)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_logout_orb),
lu->logout_orb,
lu->logout_orb_dma);
if (lu->query_logins_orb)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_query_logins_orb),
lu->query_logins_orb,
lu->query_logins_orb_dma);
if (lu->query_logins_response)
- dma_free_coherent(&hi->host->device,
+ dma_free_coherent(hi->host->device.parent,
sizeof(struct sbp2_query_logins_response),
lu->query_logins_response,
lu->query_logins_response_dma);
cmd->dma_size = sgpnt[0].length;
cmd->dma_type = CMD_DMA_PAGE;
- cmd->cmd_dma = dma_map_page(&hi->host->device,
+ cmd->cmd_dma = dma_map_page(hi->host->device.parent,
sgpnt[0].page, sgpnt[0].offset,
cmd->dma_size, cmd->dma_dir);
&cmd->scatter_gather_element[0];
u32 sg_count, sg_len;
dma_addr_t sg_addr;
- int i, count = dma_map_sg(&hi->host->device, sgpnt, scsi_use_sg,
- dma_dir);
+ int i, count = dma_map_sg(hi->host->device.parent, sgpnt,
+ scsi_use_sg, dma_dir);
cmd->dma_size = scsi_use_sg;
cmd->sge_buffer = sgpnt;
cmd->dma_dir = dma_dir;
cmd->dma_size = scsi_request_bufflen;
cmd->dma_type = CMD_DMA_SINGLE;
- cmd->cmd_dma = dma_map_single(&hi->host->device, scsi_request_buffer,
+ cmd->cmd_dma = dma_map_single(hi->host->device.parent,
+ scsi_request_buffer,
cmd->dma_size, cmd->dma_dir);
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
size_t length;
unsigned long flags;
- dma_sync_single_for_device(&hi->host->device, cmd->command_orb_dma,
+ dma_sync_single_for_device(hi->host->device.parent,
+ cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- dma_sync_single_for_device(&hi->host->device, cmd->sge_dma,
+ dma_sync_single_for_device(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
* The target's fetch agent may or may not have read this
* previous ORB yet.
*/
- dma_sync_single_for_cpu(&hi->host->device, last_orb_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent, last_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
last_orb->next_ORB_lo = cpu_to_be32(cmd->command_orb_dma);
wmb();
/* Tells hardware that this pointer is valid */
last_orb->next_ORB_hi = 0;
- dma_sync_single_for_device(&hi->host->device, last_orb_dma,
+ dma_sync_single_for_device(hi->host->device.parent,
+ last_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
addr += SBP2_DOORBELL_OFFSET;
else
cmd = sbp2util_find_command_for_orb(lu, sb->ORB_offset_lo);
if (cmd) {
- dma_sync_single_for_cpu(&hi->host->device, cmd->command_orb_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent,
+ cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
/* Grab SCSI command pointers and check status. */
if (unlikely(SCpnt->device->lun))
goto done;
- /* handle the request sense command here (auto-request sense) */
- if (SCpnt->cmnd[0] == REQUEST_SENSE) {
- memcpy(SCpnt->request_buffer, SCpnt->sense_buffer,
- SCpnt->request_bufflen);
- memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
- sbp2scsi_complete_command(lu, SBP2_SCSI_STATUS_GOOD, SCpnt,
- done);
- return 0;
- }
-
if (unlikely(!hpsb_node_entry_valid(lu->ne))) {
SBP2_ERR("Bus reset in progress - rejecting command");
result = DID_BUS_BUSY << 16;
while (!list_empty(&lu->cmd_orb_inuse)) {
lh = lu->cmd_orb_inuse.next;
cmd = list_entry(lh, struct sbp2_command_info, list);
- dma_sync_single_for_cpu(&hi->host->device, cmd->command_orb_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent,
+ cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
sbp2util_mark_command_completed(lu, cmd);
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
+ if (sdev->type == TYPE_ROM)
+ sdev->use_10_for_ms = 1;
if (sdev->type == TYPE_DISK &&
lu->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
sdev->skip_ms_page_8 = 1;
spin_lock_irqsave(&lu->cmd_orb_lock, flags);
cmd = sbp2util_find_command_for_SCpnt(lu, SCpnt);
if (cmd) {
- dma_sync_single_for_cpu(&hi->host->device,
+ dma_sync_single_for_cpu(hi->host->device.parent,
cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
DMA_TO_DEVICE);
- dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ dma_sync_single_for_cpu(hi->host->device.parent,
+ cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_BIDIRECTIONAL);
sbp2util_mark_command_completed(lu, cmd);
*sin = iw_event->local_addr;
sin = (struct sockaddr_in *) &id_priv->id.route.addr.dst_addr;
*sin = iw_event->remote_addr;
- if (iw_event->status)
- event.event = RDMA_CM_EVENT_REJECTED;
- else
+ switch (iw_event->status) {
+ case 0:
event.event = RDMA_CM_EVENT_ESTABLISHED;
+ break;
+ case -ECONNRESET:
+ case -ECONNREFUSED:
+ event.event = RDMA_CM_EVENT_REJECTED;
+ break;
+ case -ETIMEDOUT:
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ break;
+ default:
+ event.event = RDMA_CM_EVENT_CONNECT_ERROR;
+ break;
+ }
break;
case IW_CM_EVENT_ESTABLISHED:
event.event = RDMA_CM_EVENT_ESTABLISHED;
if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) {
if (!ctx->backlog) {
ret = -EDQUOT;
+ kfree(uevent);
goto out;
}
ctx->backlog--;
+ } else if (!ctx->uid) {
+ /*
+ * We ignore events for new connections until userspace has set
+ * their context. This can only happen if an error occurs on a
+ * new connection before the user accepts it. This is okay,
+ * since the accept will just fail later.
+ */
+ kfree(uevent);
+ goto out;
}
+
list_add_tail(&uevent->list, &ctx->file->event_list);
wake_up_interruptible(&ctx->file->poll_wait);
out:
unsigned long flags;
spin_lock_irqsave(&ehca_cq_idr_lock, flags);
- while (my_cq->nr_callbacks)
+ while (my_cq->nr_callbacks) {
+ spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
yield();
+ spin_lock_irqsave(&ehca_cq_idr_lock, flags);
+ }
idr_remove(&ehca_cq_idr, my_cq->token);
spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
ib_device);
struct hipz_query_hca *rblock;
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
return -ENOMEM;
ib_device);
struct hipz_query_port *rblock;
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
return -ENOMEM;
return -EINVAL;
}
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
return -ENOMEM;
return -EINVAL;
}
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
return -ENOMEM;
u64 *rblock;
unsigned long block_count;
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_ATOMIC);
if (!rblock) {
ehca_err(&shca->ib_device, "Cannot allocate rblock memory.");
ret = -ENOMEM;
cq = idr_find(&ehca_cq_idr, token);
if (cq == NULL) {
- spin_unlock(&ehca_cq_idr_lock);
+ spin_unlock_irqrestore(&ehca_cq_idr_lock,
+ flags);
break;
}
int ehca_munmap(unsigned long addr, size_t len);
#ifdef CONFIG_PPC_64K_PAGES
-void *ehca_alloc_fw_ctrlblock(void);
+void *ehca_alloc_fw_ctrlblock(gfp_t flags);
void ehca_free_fw_ctrlblock(void *ptr);
#else
-#define ehca_alloc_fw_ctrlblock() ((void *) get_zeroed_page(GFP_KERNEL))
+#define ehca_alloc_fw_ctrlblock(flags) ((void *) get_zeroed_page(flags))
#define ehca_free_fw_ctrlblock(ptr) free_page((unsigned long)(ptr))
#endif
#ifdef CONFIG_PPC_64K_PAGES
static struct kmem_cache *ctblk_cache = NULL;
-void *ehca_alloc_fw_ctrlblock(void)
+void *ehca_alloc_fw_ctrlblock(gfp_t flags)
{
- void *ret = kmem_cache_zalloc(ctblk_cache, GFP_KERNEL);
+ void *ret = kmem_cache_zalloc(ctblk_cache, flags);
if (!ret)
ehca_gen_err("Out of memory for ctblk");
return ret;
u64 h_ret;
struct hipz_query_hca *rblock;
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_gen_err("Cannot allocate rblock memory.");
return -ENOMEM;
int ret = 0;
struct hipz_query_hca *rblock;
- rblock = ehca_alloc_fw_ctrlblock();
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!rblock) {
ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
return -ENOMEM;
\
shca = dev->driver_data; \
\
- rblock = ehca_alloc_fw_ctrlblock(); \
+ rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); \
if (!rblock) { \
dev_err(dev, "Can't allocate rblock memory."); \
return 0; \
u32 i;
u64 *kpage;
- kpage = ehca_alloc_fw_ctrlblock();
+ kpage = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!kpage) {
ehca_err(&shca->ib_device, "kpage alloc failed");
ret = -ENOMEM;
ehca_mrmw_map_acl(acl, &hipz_acl);
ehca_mrmw_set_pgsize_hipz_acl(&hipz_acl);
- kpage = ehca_alloc_fw_ctrlblock();
+ kpage = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!kpage) {
ehca_err(&shca->ib_device, "kpage alloc failed");
ret = -ENOMEM;
unsigned long spl_flags = 0;
/* do query_qp to obtain current attr values */
- mqpcb = ehca_alloc_fw_ctrlblock();
+ mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!mqpcb) {
ehca_err(ibqp->device, "Could not get zeroed page for mqpcb "
"ehca_qp=%p qp_num=%x ", my_qp, ibqp->qp_num);
return -EINVAL;
}
- qpcb = ehca_alloc_fw_ctrlblock();
+ qpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!qpcb) {
ehca_err(qp->device,"Out of memory for qpcb "
"ehca_qp=%p qp_num=%x", my_qp, qp->qp_num);
MTHCA_CQ_ENTRY_SIZE = 0x20
};
+enum {
+ MTHCA_ATOMIC_BYTE_LEN = 8
+};
+
/*
* Must be packed because start is 64 bits but only aligned to 32 bits.
*/
break;
case MTHCA_OPCODE_ATOMIC_CS:
entry->opcode = IB_WC_COMP_SWAP;
- entry->byte_len = be32_to_cpu(cqe->byte_cnt);
+ entry->byte_len = MTHCA_ATOMIC_BYTE_LEN;
break;
case MTHCA_OPCODE_ATOMIC_FA:
entry->opcode = IB_WC_FETCH_ADD;
- entry->byte_len = be32_to_cpu(cqe->byte_cnt);
+ entry->byte_len = MTHCA_ATOMIC_BYTE_LEN;
break;
case MTHCA_OPCODE_BIND_MW:
entry->opcode = IB_WC_BIND_MW;
list_for_each_entry(chunk, &icm->chunk_list, list) {
for (i = 0; i < chunk->npages; ++i) {
- if (chunk->mem[i].length >= offset) {
+ if (chunk->mem[i].length > offset) {
page = chunk->mem[i].page;
goto out;
}
struct mthca_fmr *fmr;
int err;
- fmr = kmemdup(fmr_attr, sizeof *fmr, GFP_KERNEL);
+ fmr = kmalloc(sizeof *fmr, GFP_KERNEL);
if (!fmr)
return ERR_PTR(-ENOMEM);
+ memcpy(&fmr->attr, fmr_attr, sizeof *fmr_attr);
err = mthca_fmr_alloc(to_mdev(pd->device), to_mpd(pd)->pd_num,
convert_access(mr_access_flags), fmr);
{
struct mthca_dev *dev = to_mdev(ibqp->device);
struct mthca_qp *qp = to_mqp(ibqp);
- int err;
- struct mthca_mailbox *mailbox;
+ int err = 0;
+ struct mthca_mailbox *mailbox = NULL;
struct mthca_qp_param *qp_param;
struct mthca_qp_context *context;
int mthca_state;
u8 status;
+ if (qp->state == IB_QPS_RESET) {
+ qp_attr->qp_state = IB_QPS_RESET;
+ goto done;
+ }
+
mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
mthca_state = be32_to_cpu(context->flags) >> 28;
qp_attr->qp_state = to_ib_qp_state(mthca_state);
- qp_attr->cur_qp_state = qp_attr->qp_state;
qp_attr->path_mtu = context->mtu_msgmax >> 5;
qp_attr->path_mig_state =
to_ib_mig_state((be32_to_cpu(context->flags) >> 11) & 0x3);
qp_attr->dest_qp_num = be32_to_cpu(context->remote_qpn) & 0xffffff;
qp_attr->qp_access_flags =
to_ib_qp_access_flags(be32_to_cpu(context->params2));
- qp_attr->cap.max_send_wr = qp->sq.max;
- qp_attr->cap.max_recv_wr = qp->rq.max;
- qp_attr->cap.max_send_sge = qp->sq.max_gs;
- qp_attr->cap.max_recv_sge = qp->rq.max_gs;
- qp_attr->cap.max_inline_data = qp->max_inline_data;
if (qp->transport == RC || qp->transport == UC) {
to_ib_ah_attr(dev, &qp_attr->ah_attr, &context->pri_path);
qp_attr->retry_cnt = (be32_to_cpu(context->params1) >> 16) & 0x7;
qp_attr->rnr_retry = context->pri_path.rnr_retry >> 5;
qp_attr->alt_timeout = context->alt_path.ackto >> 3;
- qp_init_attr->cap = qp_attr->cap;
+
+done:
+ qp_attr->cur_qp_state = qp_attr->qp_state;
+ qp_attr->cap.max_send_wr = qp->sq.max;
+ qp_attr->cap.max_recv_wr = qp->rq.max;
+ qp_attr->cap.max_send_sge = qp->sq.max_gs;
+ qp_attr->cap.max_recv_sge = qp->rq.max_gs;
+ qp_attr->cap.max_inline_data = qp->max_inline_data;
+
+ qp_init_attr->cap = qp_attr->cap;
out:
mthca_free_mailbox(dev, mailbox);
* - if yes, the mtask is recycled at iscsi_complete_pdu
* - if no, the mtask is recycled at iser_snd_completion
*/
- if (error && error != -EAGAIN)
+ if (error && error != -ENOBUFS)
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return error;
error = iscsi_iser_ctask_xmit_unsol_data(conn, ctask);
iscsi_iser_ctask_xmit_exit:
- if (error && error != -EAGAIN)
+ if (error && error != -ENOBUFS)
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return error;
}
static int
iser_check_xmit(struct iscsi_conn *conn, void *task)
{
- int rc = 0;
struct iscsi_iser_conn *iser_conn = conn->dd_data;
- write_lock_bh(conn->recv_lock);
if (atomic_read(&iser_conn->ib_conn->post_send_buf_count) ==
ISER_QP_MAX_REQ_DTOS) {
- iser_dbg("%ld can't xmit task %p, suspending tx\n",jiffies,task);
- set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
- rc = -EAGAIN;
+ iser_dbg("%ld can't xmit task %p\n",jiffies,task);
+ return -ENOBUFS;
}
- write_unlock_bh(conn->recv_lock);
- return rc;
+ return 0;
}
return -EPERM;
}
if (iser_check_xmit(conn, ctask))
- return -EAGAIN;
+ return -ENOBUFS;
edtl = ntohl(hdr->data_length);
}
if (iser_check_xmit(conn, ctask))
- return -EAGAIN;
+ return -ENOBUFS;
itt = ntohl(hdr->itt);
data_seg_len = ntoh24(hdr->dlength);
}
if (iser_check_xmit(conn,mtask))
- return -EAGAIN;
+ return -ENOBUFS;
/* build the tx desc regd header and add it to the tx desc dto */
mdesc->type = ISCSI_TX_CONTROL;
struct iscsi_iser_conn *iser_conn = ib_conn->iser_conn;
struct iscsi_conn *conn = iser_conn->iscsi_conn;
struct iscsi_mgmt_task *mtask;
+ int resume_tx = 0;
iser_dbg("Initiator, Data sent dto=0x%p\n", dto);
if (tx_desc->type == ISCSI_TX_DATAOUT)
kmem_cache_free(ig.desc_cache, tx_desc);
+ if (atomic_read(&iser_conn->ib_conn->post_send_buf_count) ==
+ ISER_QP_MAX_REQ_DTOS)
+ resume_tx = 1;
+
atomic_dec(&ib_conn->post_send_buf_count);
- write_lock(conn->recv_lock);
- if (conn->suspend_tx) {
+ if (resume_tx) {
iser_dbg("%ld resuming tx\n",jiffies);
- clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
scsi_queue_work(conn->session->host, &conn->xmitwork);
}
- write_unlock(conn->recv_lock);
if (tx_desc->type == ISCSI_TX_CONTROL) {
/* this arithmetic is legal by libiscsi dd_data allocation */
switch (token) {
case SRP_OPT_ID_EXT:
p = match_strdup(args);
+ if (!p) {
+ ret = -ENOMEM;
+ goto out;
+ }
target->id_ext = cpu_to_be64(simple_strtoull(p, NULL, 16));
kfree(p);
break;
case SRP_OPT_IOC_GUID:
p = match_strdup(args);
+ if (!p) {
+ ret = -ENOMEM;
+ goto out;
+ }
target->ioc_guid = cpu_to_be64(simple_strtoull(p, NULL, 16));
kfree(p);
break;
case SRP_OPT_DGID:
p = match_strdup(args);
+ if (!p) {
+ ret = -ENOMEM;
+ goto out;
+ }
if (strlen(p) != 32) {
printk(KERN_WARNING PFX "bad dest GID parameter '%s'\n", p);
kfree(p);
case SRP_OPT_SERVICE_ID:
p = match_strdup(args);
+ if (!p) {
+ ret = -ENOMEM;
+ goto out;
+ }
target->service_id = cpu_to_be64(simple_strtoull(p, NULL, 16));
kfree(p);
break;
case SRP_OPT_INITIATOR_EXT:
p = match_strdup(args);
+ if (!p) {
+ ret = -ENOMEM;
+ goto out;
+ }
target->initiator_ext = cpu_to_be64(simple_strtoull(p, NULL, 16));
kfree(p);
break;
#define I8042_MUX_PHYS_DESC "sparcps2/serio%d"
static void __iomem *kbd_iobase;
+static struct resource *kbd_res;
#define I8042_COMMAND_REG (kbd_iobase + 0x64UL)
#define I8042_DATA_REG (kbd_iobase + 0x60UL)
i8042_kbd_irq = irq;
kbd_iobase = of_ioremap(&kbd->resource[0],
0, 8, "kbd");
+ kbd_res = &kbd->resource[0];
} else if (!strcmp(dp->name, OBP_PS2MS_NAME1) ||
!strcmp(dp->name, OBP_PS2MS_NAME2)) {
struct of_device *ms = of_find_device_by_node(dp);
static int __devexit sparc_i8042_remove(struct of_device *op)
{
- of_iounmap(kbd_iobase, 8);
+ of_iounmap(kbd_res, kbd_iobase, 8);
return 0;
}
if (i8042_kbd_irq == -1 ||
i8042_aux_irq == -1) {
if (kbd_iobase) {
- of_iounmap(kbd_iobase, 8);
+ of_iounmap(kbd_res, kbd_iobase, 8);
kbd_iobase = (void __iomem *) NULL;
}
return -ENODEV;
{
unsigned long flags;
unsigned i;
- static struct cardstate *ret = NULL;
+ struct cardstate *ret = NULL;
spin_lock_irqsave(&drv->lock, flags);
for (i = 0; i < drv->minors; ++i) {
if (!(drv->flags[i] & VALID_MINOR)) {
- drv->flags[i] = VALID_MINOR;
- ret = drv->cs + i;
- }
- if (ret)
+ if (try_module_get(drv->owner)) {
+ drv->flags[i] = VALID_MINOR;
+ ret = drv->cs + i;
+ }
break;
+ }
}
spin_unlock_irqrestore(&drv->lock, flags);
return ret;
unsigned long flags;
struct gigaset_driver *drv = cs->driver;
spin_lock_irqsave(&drv->lock, flags);
+ if (drv->flags[cs->minor_index] & VALID_MINOR)
+ module_put(drv->owner);
drv->flags[cs->minor_index] = 0;
spin_unlock_irqrestore(&drv->lock, flags);
}
} else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
skb_reserve(bcs->skb, HW_HDR_LEN);
else {
- warn("could not allocate skb\n");
+ warn("could not allocate skb");
bcs->inputstate |= INS_skip_frame;
}
int i;
gig_dbg(DEBUG_INIT, "allocating cs");
- cs = alloc_cs(drv);
- if (!cs)
- goto error;
+ if (!(cs = alloc_cs(drv))) {
+ err("maximum number of devices exceeded");
+ return NULL;
+ }
+ mutex_init(&cs->mutex);
+ mutex_lock(&cs->mutex);
+
gig_dbg(DEBUG_INIT, "allocating bcs[0..%d]", channels - 1);
cs->bcs = kmalloc(channels * sizeof(struct bc_state), GFP_KERNEL);
- if (!cs->bcs)
+ if (!cs->bcs) {
+ err("out of memory");
goto error;
+ }
gig_dbg(DEBUG_INIT, "allocating inbuf");
cs->inbuf = kmalloc(sizeof(struct inbuf_t), GFP_KERNEL);
- if (!cs->inbuf)
+ if (!cs->inbuf) {
+ err("out of memory");
goto error;
+ }
cs->cs_init = 0;
cs->channels = channels;
spin_lock_init(&cs->ev_lock);
cs->ev_tail = 0;
cs->ev_head = 0;
- mutex_init(&cs->mutex);
- mutex_lock(&cs->mutex);
tasklet_init(&cs->event_tasklet, &gigaset_handle_event,
(unsigned long) cs);
for (i = 0; i < channels; ++i) {
gig_dbg(DEBUG_INIT, "setting up bcs[%d].read", i);
- if (!gigaset_initbcs(cs->bcs + i, cs, i))
+ if (!gigaset_initbcs(cs->bcs + i, cs, i)) {
+ err("could not allocate channel %d data", i);
goto error;
+ }
}
++cs->cs_init;
make_valid(cs, VALID_ID);
++cs->cs_init;
gig_dbg(DEBUG_INIT, "setting up hw");
- if (!cs->ops->initcshw(cs))
+ if (!cs->ops->initcshw(cs)) {
+ err("could not allocate device specific data");
goto error;
+ }
++cs->cs_init;
mutex_unlock(&cs->mutex);
return cs;
-error: if (cs)
- mutex_unlock(&cs->mutex);
+error:
+ mutex_unlock(&cs->mutex);
gig_dbg(DEBUG_INIT, "failed");
gigaset_freecs(cs);
return NULL;
spin_unlock_irqrestore(&driver_lock, flags);
gigaset_if_freedriver(drv);
- module_put(drv->owner);
kfree(drv->cs);
kfree(drv->flags);
if (!drv)
return NULL;
- if (!try_module_get(owner))
- goto out1;
-
- drv->cs = NULL;
drv->have_tty = 0;
drv->minor = minor;
drv->minors = minors;
drv->cs = kmalloc(minors * sizeof *drv->cs, GFP_KERNEL);
if (!drv->cs)
- goto out2;
+ goto error;
drv->flags = kmalloc(minors * sizeof *drv->flags, GFP_KERNEL);
if (!drv->flags)
- goto out3;
+ goto error;
for (i = 0; i < minors; ++i) {
drv->flags[i] = 0;
return drv;
-out3:
+error:
kfree(drv->cs);
-out2:
- module_put(owner);
-out1:
kfree(drv);
return NULL;
}
rs->state = CCPResetIdle;
rs->is = is;
rs->id = id;
+ init_timer(&rs->timer);
rs->timer.data = (unsigned long)rs;
rs->timer.function = isdn_ppp_ccp_timer_callback;
is->reset->rs[id] = rs;
#define KVM_MAX_VCPUS 1
#define KVM_MEMORY_SLOTS 4
#define KVM_NUM_MMU_PAGES 256
+#define KVM_MIN_FREE_MMU_PAGES 5
+#define KVM_REFILL_PAGES 25
#define FX_IMAGE_SIZE 512
#define FX_IMAGE_ALIGN 16
typedef u64 hpa_t;
typedef unsigned long hfn_t;
+#define NR_PTE_CHAIN_ENTRIES 5
+
+struct kvm_pte_chain {
+ u64 *parent_ptes[NR_PTE_CHAIN_ENTRIES];
+ struct hlist_node link;
+};
+
+/*
+ * kvm_mmu_page_role, below, is defined as:
+ *
+ * bits 0:3 - total guest paging levels (2-4, or zero for real mode)
+ * bits 4:7 - page table level for this shadow (1-4)
+ * bits 8:9 - page table quadrant for 2-level guests
+ * bit 16 - "metaphysical" - gfn is not a real page (huge page/real mode)
+ */
+union kvm_mmu_page_role {
+ unsigned word;
+ struct {
+ unsigned glevels : 4;
+ unsigned level : 4;
+ unsigned quadrant : 2;
+ unsigned pad_for_nice_hex_output : 6;
+ unsigned metaphysical : 1;
+ };
+};
+
struct kvm_mmu_page {
struct list_head link;
+ struct hlist_node hash_link;
+
+ /*
+ * The following two entries are used to key the shadow page in the
+ * hash table.
+ */
+ gfn_t gfn;
+ union kvm_mmu_page_role role;
+
hpa_t page_hpa;
unsigned long slot_bitmap; /* One bit set per slot which has memory
* in this shadow page.
*/
int global; /* Set if all ptes in this page are global */
- u64 *parent_pte;
+ int multimapped; /* More than one parent_pte? */
+ int root_count; /* Currently serving as active root */
+ union {
+ u64 *parent_pte; /* !multimapped */
+ struct hlist_head parent_ptes; /* multimapped, kvm_pte_chain */
+ };
};
struct vmcs {
struct kvm_mmu {
void (*new_cr3)(struct kvm_vcpu *vcpu);
int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
- void (*inval_page)(struct kvm_vcpu *vcpu, gva_t gva);
void (*free)(struct kvm_vcpu *vcpu);
gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
hpa_t root_hpa;
int root_level;
int shadow_root_level;
+
+ u64 *pae_root;
};
+#define KVM_NR_MEM_OBJS 20
+
+struct kvm_mmu_memory_cache {
+ int nobjs;
+ void *objects[KVM_NR_MEM_OBJS];
+};
+
+/*
+ * We don't want allocation failures within the mmu code, so we preallocate
+ * enough memory for a single page fault in a cache.
+ */
struct kvm_guest_debug {
int enabled;
unsigned long bp[4];
struct mutex mutex;
int cpu;
int launched;
+ int interrupt_window_open;
unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
#define NR_IRQ_WORDS KVM_IRQ_BITMAP_SIZE(unsigned long)
unsigned long irq_pending[NR_IRQ_WORDS];
unsigned long cr3;
unsigned long cr4;
unsigned long cr8;
+ u64 pdptrs[4]; /* pae */
u64 shadow_efer;
u64 apic_base;
+ u64 ia32_misc_enable_msr;
int nmsrs;
struct vmx_msr_entry *guest_msrs;
struct vmx_msr_entry *host_msrs;
struct kvm_mmu_page page_header_buf[KVM_NUM_MMU_PAGES];
struct kvm_mmu mmu;
+ struct kvm_mmu_memory_cache mmu_pte_chain_cache;
+ struct kvm_mmu_memory_cache mmu_rmap_desc_cache;
+
+ gfn_t last_pt_write_gfn;
+ int last_pt_write_count;
+
struct kvm_guest_debug guest_debug;
char fx_buf[FX_BUF_SIZE];
spinlock_t lock; /* protects everything except vcpus */
int nmemslots;
struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS];
+ /*
+ * Hash table of struct kvm_mmu_page.
+ */
struct list_head active_mmu_pages;
+ int n_free_mmu_pages;
+ struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
struct kvm_vcpu vcpus[KVM_MAX_VCPUS];
int memory_config_version;
int busy;
+ unsigned long rmap_overflow;
};
struct kvm_stat {
u32 io_exits;
u32 mmio_exits;
u32 signal_exits;
+ u32 irq_window_exits;
+ u32 halt_exits;
+ u32 request_irq_exits;
u32 irq_exits;
};
struct kvm_segment *var, int seg);
void (*set_segment)(struct kvm_vcpu *vcpu,
struct kvm_segment *var, int seg);
- int (*is_long_mode)(struct kvm_vcpu *vcpu);
void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+ void (*decache_cr0_cr4_guest_bits)(struct kvm_vcpu *vcpu);
void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
void (*set_cr0_no_modeswitch)(struct kvm_vcpu *vcpu,
unsigned long cr0);
void kvm_exit_arch(void);
void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
-int kvm_mmu_init(struct kvm_vcpu *vcpu);
+int kvm_mmu_create(struct kvm_vcpu *vcpu);
+int kvm_mmu_setup(struct kvm_vcpu *vcpu);
int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
-void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
+void kvm_mmu_slot_remove_write_access(struct kvm_vcpu *vcpu, int slot);
hpa_t gpa_to_hpa(struct kvm_vcpu *vcpu, gpa_t gpa);
#define HPA_MSB ((sizeof(hpa_t) * 8) - 1)
void set_cr8(struct kvm_vcpu *vcpu, unsigned long cr0);
void lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
-#ifdef CONFIG_X86_64
-void set_efer(struct kvm_vcpu *vcpu, u64 efer);
-#endif
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
void fx_init(struct kvm_vcpu *vcpu);
unsigned long segment_base(u16 selector);
+void kvm_mmu_pre_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes);
+void kvm_mmu_post_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes);
+int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
+void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
+
+static inline int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
+ u32 error_code)
+{
+ if (unlikely(vcpu->kvm->n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
+ kvm_mmu_free_some_pages(vcpu);
+ return vcpu->mmu.page_fault(vcpu, gva, error_code);
+}
+
static inline struct page *_gfn_to_page(struct kvm *kvm, gfn_t gfn)
{
struct kvm_memory_slot *slot = gfn_to_memslot(kvm, gfn);
return (slot) ? slot->phys_mem[gfn - slot->base_gfn] : NULL;
}
+static inline int is_long_mode(struct kvm_vcpu *vcpu)
+{
+#ifdef CONFIG_X86_64
+ return vcpu->shadow_efer & EFER_LME;
+#else
+ return 0;
+#endif
+}
+
static inline int is_pae(struct kvm_vcpu *vcpu)
{
return vcpu->cr4 & CR4_PAE_MASK;
#define TSS_REDIRECTION_SIZE (256 / 8)
#define RMODE_TSS_SIZE (TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
-#ifdef CONFIG_X86_64
-
-/*
- * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64. Therefore
- * we need to allocate shadow page tables in the first 4GB of memory, which
- * happens to fit the DMA32 zone.
- */
-#define GFP_KVM_MMU (GFP_KERNEL | __GFP_DMA32)
-
-#else
-
-#define GFP_KVM_MMU GFP_KERNEL
-
-#endif
-
#endif
{ "io_exits", &kvm_stat.io_exits },
{ "mmio_exits", &kvm_stat.mmio_exits },
{ "signal_exits", &kvm_stat.signal_exits },
+ { "irq_window", &kvm_stat.irq_window_exits },
+ { "halt_exits", &kvm_stat.halt_exits },
+ { "request_irq", &kvm_stat.request_irq_exits },
{ "irq_exits", &kvm_stat.irq_exits },
{ 0, 0 }
};
}
EXPORT_SYMBOL_GPL(segment_base);
+static inline int valid_vcpu(int n)
+{
+ return likely(n >= 0 && n < KVM_MAX_VCPUS);
+}
+
int kvm_read_guest(struct kvm_vcpu *vcpu,
gva_t addr,
unsigned long size,
struct kvm_vcpu *vcpu = &kvm->vcpus[i];
mutex_init(&vcpu->mutex);
+ vcpu->kvm = kvm;
vcpu->mmu.root_hpa = INVALID_PAGE;
INIT_LIST_HEAD(&vcpu->free_pages);
}
if (!dont || free->phys_mem != dont->phys_mem)
if (free->phys_mem) {
for (i = 0; i < free->npages; ++i)
- __free_page(free->phys_mem[i]);
+ if (free->phys_mem[i])
+ __free_page(free->phys_mem[i]);
vfree(free->phys_mem);
}
static void kvm_free_vcpu(struct kvm_vcpu *vcpu)
{
- kvm_arch_ops->vcpu_free(vcpu);
+ vcpu_load(vcpu->kvm, vcpu_slot(vcpu));
kvm_mmu_destroy(vcpu);
+ vcpu_put(vcpu);
+ kvm_arch_ops->vcpu_free(vcpu);
}
static void kvm_free_vcpus(struct kvm *kvm)
kvm_arch_ops->inject_gp(vcpu, 0);
}
-static int pdptrs_have_reserved_bits_set(struct kvm_vcpu *vcpu,
- unsigned long cr3)
+/*
+ * Load the pae pdptrs. Return true is they are all valid.
+ */
+static int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
{
gfn_t pdpt_gfn = cr3 >> PAGE_SHIFT;
- unsigned offset = (cr3 & (PAGE_SIZE-1)) >> 5;
+ unsigned offset = ((cr3 & (PAGE_SIZE-1)) >> 5) << 2;
int i;
u64 pdpte;
u64 *pdpt;
+ int ret;
struct kvm_memory_slot *memslot;
spin_lock(&vcpu->kvm->lock);
/* FIXME: !memslot - emulate? 0xff? */
pdpt = kmap_atomic(gfn_to_page(memslot, pdpt_gfn), KM_USER0);
+ ret = 1;
for (i = 0; i < 4; ++i) {
pdpte = pdpt[offset + i];
- if ((pdpte & 1) && (pdpte & 0xfffffff0000001e6ull))
- break;
+ if ((pdpte & 1) && (pdpte & 0xfffffff0000001e6ull)) {
+ ret = 0;
+ goto out;
+ }
}
+ for (i = 0; i < 4; ++i)
+ vcpu->pdptrs[i] = pdpt[offset + i];
+
+out:
kunmap_atomic(pdpt, KM_USER0);
spin_unlock(&vcpu->kvm->lock);
- return i != 4;
+ return ret;
}
void set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
}
} else
#endif
- if (is_pae(vcpu) &&
- pdptrs_have_reserved_bits_set(vcpu, vcpu->cr3)) {
+ if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->cr3)) {
printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
"reserved bits\n");
inject_gp(vcpu);
void lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
{
+ kvm_arch_ops->decache_cr0_cr4_guest_bits(vcpu);
set_cr0(vcpu, (vcpu->cr0 & ~0x0ful) | (msw & 0x0f));
}
EXPORT_SYMBOL_GPL(lmsw);
return;
}
- if (kvm_arch_ops->is_long_mode(vcpu)) {
+ if (is_long_mode(vcpu)) {
if (!(cr4 & CR4_PAE_MASK)) {
printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
"in long mode\n");
return;
}
} else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & CR4_PAE_MASK)
- && pdptrs_have_reserved_bits_set(vcpu, vcpu->cr3)) {
+ && !load_pdptrs(vcpu, vcpu->cr3)) {
printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
inject_gp(vcpu);
}
void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
{
- if (kvm_arch_ops->is_long_mode(vcpu)) {
+ if (is_long_mode(vcpu)) {
if ( cr3 & CR3_L_MODE_RESEVED_BITS) {
printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
inject_gp(vcpu);
return;
}
if (is_paging(vcpu) && is_pae(vcpu) &&
- pdptrs_have_reserved_bits_set(vcpu, cr3)) {
+ !load_pdptrs(vcpu, cr3)) {
printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
"reserved bits\n");
inject_gp(vcpu);
vcpu->cr3 = cr3;
spin_lock(&vcpu->kvm->lock);
- vcpu->mmu.new_cr3(vcpu);
+ /*
+ * Does the new cr3 value map to physical memory? (Note, we
+ * catch an invalid cr3 even in real-mode, because it would
+ * cause trouble later on when we turn on paging anyway.)
+ *
+ * A real CPU would silently accept an invalid cr3 and would
+ * attempt to use it - with largely undefined (and often hard
+ * to debug) behavior on the guest side.
+ */
+ if (unlikely(!gfn_to_memslot(vcpu->kvm, cr3 >> PAGE_SHIFT)))
+ inject_gp(vcpu);
+ else
+ vcpu->mmu.new_cr3(vcpu);
spin_unlock(&vcpu->kvm->lock);
}
EXPORT_SYMBOL_GPL(set_cr3);
struct kvm_vcpu *vcpu;
r = -EINVAL;
- if (n < 0 || n >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(n))
goto out;
vcpu = &kvm->vcpus[n];
vcpu->guest_fx_image = vcpu->host_fx_image + FX_IMAGE_SIZE;
vcpu->cpu = -1; /* First load will set up TR */
- vcpu->kvm = kvm;
r = kvm_arch_ops->vcpu_create(vcpu);
if (r < 0)
goto out_free_vcpus;
- kvm_arch_ops->vcpu_load(vcpu);
+ r = kvm_mmu_create(vcpu);
+ if (r < 0)
+ goto out_free_vcpus;
- r = kvm_arch_ops->vcpu_setup(vcpu);
+ kvm_arch_ops->vcpu_load(vcpu);
+ r = kvm_mmu_setup(vcpu);
if (r >= 0)
- r = kvm_mmu_init(vcpu);
-
+ r = kvm_arch_ops->vcpu_setup(vcpu);
vcpu_put(vcpu);
if (r < 0)
| __GFP_ZERO);
if (!new.phys_mem[i])
goto out_free;
+ new.phys_mem[i]->private = 0;
}
}
return r;
}
+static void do_remove_write_access(struct kvm_vcpu *vcpu, int slot)
+{
+ spin_lock(&vcpu->kvm->lock);
+ kvm_mmu_slot_remove_write_access(vcpu, slot);
+ spin_unlock(&vcpu->kvm->lock);
+}
+
/*
* Get (and clear) the dirty memory log for a memory slot.
*/
struct kvm_memory_slot *memslot;
int r, i;
int n;
+ int cleared;
unsigned long any = 0;
spin_lock(&kvm->lock);
if (any) {
- spin_lock(&kvm->lock);
- kvm_mmu_slot_remove_write_access(kvm, log->slot);
- spin_unlock(&kvm->lock);
- memset(memslot->dirty_bitmap, 0, n);
+ cleared = 0;
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
struct kvm_vcpu *vcpu = vcpu_load(kvm, i);
if (!vcpu)
continue;
+ if (!cleared) {
+ do_remove_write_access(vcpu, log->slot);
+ memset(memslot->dirty_bitmap, 0, n);
+ cleared = 1;
+ }
kvm_arch_ops->tlb_flush(vcpu);
vcpu_put(vcpu);
}
}
}
+static int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
+ unsigned long val, int bytes)
+{
+ struct kvm_memory_slot *m;
+ struct page *page;
+ void *virt;
+
+ if (((gpa + bytes - 1) >> PAGE_SHIFT) != (gpa >> PAGE_SHIFT))
+ return 0;
+ m = gfn_to_memslot(vcpu->kvm, gpa >> PAGE_SHIFT);
+ if (!m)
+ return 0;
+ page = gfn_to_page(m, gpa >> PAGE_SHIFT);
+ kvm_mmu_pre_write(vcpu, gpa, bytes);
+ virt = kmap_atomic(page, KM_USER0);
+ memcpy(virt + offset_in_page(gpa), &val, bytes);
+ kunmap_atomic(virt, KM_USER0);
+ kvm_mmu_post_write(vcpu, gpa, bytes);
+ return 1;
+}
+
static int emulator_write_emulated(unsigned long addr,
unsigned long val,
unsigned int bytes,
if (gpa == UNMAPPED_GVA)
return X86EMUL_PROPAGATE_FAULT;
+ if (emulator_write_phys(vcpu, gpa, val, bytes))
+ return X86EMUL_CONTINUE;
+
vcpu->mmio_needed = 1;
vcpu->mmio_phys_addr = gpa;
vcpu->mmio_size = bytes;
return emulator_write_emulated(addr, new, bytes, ctxt);
}
+#ifdef CONFIG_X86_32
+
+static int emulator_cmpxchg8b_emulated(unsigned long addr,
+ unsigned long old_lo,
+ unsigned long old_hi,
+ unsigned long new_lo,
+ unsigned long new_hi,
+ struct x86_emulate_ctxt *ctxt)
+{
+ static int reported;
+ int r;
+
+ if (!reported) {
+ reported = 1;
+ printk(KERN_WARNING "kvm: emulating exchange8b as write\n");
+ }
+ r = emulator_write_emulated(addr, new_lo, 4, ctxt);
+ if (r != X86EMUL_CONTINUE)
+ return r;
+ return emulator_write_emulated(addr+4, new_hi, 4, ctxt);
+}
+
+#endif
+
static unsigned long get_segment_base(struct kvm_vcpu *vcpu, int seg)
{
return kvm_arch_ops->get_segment_base(vcpu, seg);
int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
{
- spin_lock(&vcpu->kvm->lock);
- vcpu->mmu.inval_page(vcpu, address);
- spin_unlock(&vcpu->kvm->lock);
- kvm_arch_ops->invlpg(vcpu, address);
return X86EMUL_CONTINUE;
}
int emulate_clts(struct kvm_vcpu *vcpu)
{
- unsigned long cr0 = vcpu->cr0;
+ unsigned long cr0;
- cr0 &= ~CR0_TS_MASK;
+ kvm_arch_ops->decache_cr0_cr4_guest_bits(vcpu);
+ cr0 = vcpu->cr0 & ~CR0_TS_MASK;
kvm_arch_ops->set_cr0(vcpu, cr0);
return X86EMUL_CONTINUE;
}
.read_emulated = emulator_read_emulated,
.write_emulated = emulator_write_emulated,
.cmpxchg_emulated = emulator_cmpxchg_emulated,
+#ifdef CONFIG_X86_32
+ .cmpxchg8b_emulated = emulator_cmpxchg8b_emulated,
+#endif
};
int emulate_instruction(struct kvm_vcpu *vcpu,
}
if (r) {
+ if (kvm_mmu_unprotect_page_virt(vcpu, cr2))
+ return EMULATE_DONE;
if (!vcpu->mmio_needed) {
report_emulation_failure(&emulate_ctxt);
return EMULATE_FAIL;
unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
{
+ kvm_arch_ops->decache_cr0_cr4_guest_bits(vcpu);
switch (cr) {
case 0:
return vcpu->cr0;
}
}
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+ u64 data;
+
+ switch (msr) {
+ case 0xc0010010: /* SYSCFG */
+ case 0xc0010015: /* HWCR */
+ case MSR_IA32_PLATFORM_ID:
+ case MSR_IA32_P5_MC_ADDR:
+ case MSR_IA32_P5_MC_TYPE:
+ case MSR_IA32_MC0_CTL:
+ case MSR_IA32_MCG_STATUS:
+ case MSR_IA32_MCG_CAP:
+ case MSR_IA32_MC0_MISC:
+ case MSR_IA32_MC0_MISC+4:
+ case MSR_IA32_MC0_MISC+8:
+ case MSR_IA32_MC0_MISC+12:
+ case MSR_IA32_MC0_MISC+16:
+ case MSR_IA32_UCODE_REV:
+ case MSR_IA32_PERF_STATUS:
+ /* MTRR registers */
+ case 0xfe:
+ case 0x200 ... 0x2ff:
+ data = 0;
+ break;
+ case 0xcd: /* fsb frequency */
+ data = 3;
+ break;
+ case MSR_IA32_APICBASE:
+ data = vcpu->apic_base;
+ break;
+ case MSR_IA32_MISC_ENABLE:
+ data = vcpu->ia32_misc_enable_msr;
+ break;
+#ifdef CONFIG_X86_64
+ case MSR_EFER:
+ data = vcpu->shadow_efer;
+ break;
+#endif
+ default:
+ printk(KERN_ERR "kvm: unhandled rdmsr: 0x%x\n", msr);
+ return 1;
+ }
+ *pdata = data;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_get_msr_common);
+
/*
* Reads an msr value (of 'msr_index') into 'pdata'.
* Returns 0 on success, non-0 otherwise.
#ifdef CONFIG_X86_64
-void set_efer(struct kvm_vcpu *vcpu, u64 efer)
+static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
if (efer & EFER_RESERVED_BITS) {
printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
vcpu->shadow_efer = efer;
}
-EXPORT_SYMBOL_GPL(set_efer);
#endif
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ switch (msr) {
+#ifdef CONFIG_X86_64
+ case MSR_EFER:
+ set_efer(vcpu, data);
+ break;
+#endif
+ case MSR_IA32_MC0_STATUS:
+ printk(KERN_WARNING "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n",
+ __FUNCTION__, data);
+ break;
+ case MSR_IA32_UCODE_REV:
+ case MSR_IA32_UCODE_WRITE:
+ case 0x200 ... 0x2ff: /* MTRRs */
+ break;
+ case MSR_IA32_APICBASE:
+ vcpu->apic_base = data;
+ break;
+ case MSR_IA32_MISC_ENABLE:
+ vcpu->ia32_misc_enable_msr = data;
+ break;
+ default:
+ printk(KERN_ERR "kvm: unhandled wrmsr: 0x%x\n", msr);
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_set_msr_common);
+
/*
* Writes msr value into into the appropriate "register".
* Returns 0 on success, non-0 otherwise.
struct kvm_vcpu *vcpu;
int r;
- if (kvm_run->vcpu < 0 || kvm_run->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(kvm_run->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, kvm_run->vcpu);
{
struct kvm_vcpu *vcpu;
- if (regs->vcpu < 0 || regs->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(regs->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, regs->vcpu);
{
struct kvm_vcpu *vcpu;
- if (regs->vcpu < 0 || regs->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(regs->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, regs->vcpu);
struct kvm_vcpu *vcpu;
struct descriptor_table dt;
- if (sregs->vcpu < 0 || sregs->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(sregs->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, sregs->vcpu);
if (!vcpu)
sregs->gdt.limit = dt.limit;
sregs->gdt.base = dt.base;
+ kvm_arch_ops->decache_cr0_cr4_guest_bits(vcpu);
sregs->cr0 = vcpu->cr0;
sregs->cr2 = vcpu->cr2;
sregs->cr3 = vcpu->cr3;
int i;
struct descriptor_table dt;
- if (sregs->vcpu < 0 || sregs->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(sregs->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, sregs->vcpu);
if (!vcpu)
#endif
vcpu->apic_base = sregs->apic_base;
+ kvm_arch_ops->decache_cr0_cr4_guest_bits(vcpu);
+
mmu_reset_needed |= vcpu->cr0 != sregs->cr0;
kvm_arch_ops->set_cr0_no_modeswitch(vcpu, sregs->cr0);
mmu_reset_needed |= vcpu->cr4 != sregs->cr4;
kvm_arch_ops->set_cr4(vcpu, sregs->cr4);
+ if (!is_long_mode(vcpu) && is_pae(vcpu))
+ load_pdptrs(vcpu, vcpu->cr3);
if (mmu_reset_needed)
kvm_mmu_reset_context(vcpu);
/*
* List of msr numbers which we expose to userspace through KVM_GET_MSRS
* and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST.
+ *
+ * This list is modified at module load time to reflect the
+ * capabilities of the host cpu.
*/
static u32 msrs_to_save[] = {
MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
MSR_IA32_TIME_STAMP_COUNTER,
};
+static unsigned num_msrs_to_save;
+
+static u32 emulated_msrs[] = {
+ MSR_IA32_MISC_ENABLE,
+};
+
+static __init void kvm_init_msr_list(void)
+{
+ u32 dummy[2];
+ unsigned i, j;
+
+ for (i = j = 0; i < ARRAY_SIZE(msrs_to_save); i++) {
+ if (rdmsr_safe(msrs_to_save[i], &dummy[0], &dummy[1]) < 0)
+ continue;
+ if (j < i)
+ msrs_to_save[j] = msrs_to_save[i];
+ j++;
+ }
+ num_msrs_to_save = j;
+}
/*
* Adapt set_msr() to msr_io()'s calling convention
struct kvm_vcpu *vcpu;
int i;
- if (msrs->vcpu < 0 || msrs->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(msrs->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, msrs->vcpu);
{
struct kvm_vcpu *vcpu;
- if (irq->vcpu < 0 || irq->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(irq->vcpu))
return -EINVAL;
if (irq->irq < 0 || irq->irq >= 256)
return -EINVAL;
struct kvm_vcpu *vcpu;
int r;
- if (dbg->vcpu < 0 || dbg->vcpu >= KVM_MAX_VCPUS)
+ if (!valid_vcpu(dbg->vcpu))
return -EINVAL;
vcpu = vcpu_load(kvm, dbg->vcpu);
if (!vcpu)
int r = -EINVAL;
switch (ioctl) {
+ case KVM_GET_API_VERSION:
+ r = KVM_API_VERSION;
+ break;
case KVM_CREATE_VCPU: {
r = kvm_dev_ioctl_create_vcpu(kvm, arg);
if (r)
if (copy_from_user(&kvm_run, (void *)arg, sizeof kvm_run))
goto out;
r = kvm_dev_ioctl_run(kvm, &kvm_run);
- if (r < 0)
+ if (r < 0 && r != -EINTR)
goto out;
- r = -EFAULT;
- if (copy_to_user((void *)arg, &kvm_run, sizeof kvm_run))
+ if (copy_to_user((void *)arg, &kvm_run, sizeof kvm_run)) {
+ r = -EFAULT;
goto out;
- r = 0;
+ }
break;
}
case KVM_GET_REGS: {
if (copy_from_user(&msr_list, user_msr_list, sizeof msr_list))
goto out;
n = msr_list.nmsrs;
- msr_list.nmsrs = ARRAY_SIZE(msrs_to_save);
+ msr_list.nmsrs = num_msrs_to_save + ARRAY_SIZE(emulated_msrs);
if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
goto out;
r = -E2BIG;
- if (n < ARRAY_SIZE(msrs_to_save))
+ if (n < num_msrs_to_save)
goto out;
r = -EFAULT;
if (copy_to_user(user_msr_list->indices, &msrs_to_save,
- sizeof msrs_to_save))
+ num_msrs_to_save * sizeof(u32)))
+ goto out;
+ if (copy_to_user(user_msr_list->indices
+ + num_msrs_to_save * sizeof(u32),
+ &emulated_msrs,
+ ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
goto out;
r = 0;
+ break;
}
default:
;
{
int r;
- kvm_arch_ops = ops;
+ if (kvm_arch_ops) {
+ printk(KERN_ERR "kvm: already loaded the other module\n");
+ return -EEXIST;
+ }
- if (!kvm_arch_ops->cpu_has_kvm_support()) {
+ if (!ops->cpu_has_kvm_support()) {
printk(KERN_ERR "kvm: no hardware support\n");
return -EOPNOTSUPP;
}
- if (kvm_arch_ops->disabled_by_bios()) {
+ if (ops->disabled_by_bios()) {
printk(KERN_ERR "kvm: disabled by bios\n");
return -EOPNOTSUPP;
}
+ kvm_arch_ops = ops;
+
r = kvm_arch_ops->hardware_setup();
if (r < 0)
return r;
unregister_reboot_notifier(&kvm_reboot_notifier);
on_each_cpu(kvm_arch_ops->hardware_disable, 0, 0, 1);
kvm_arch_ops->hardware_unsetup();
+ kvm_arch_ops = NULL;
}
static __init int kvm_init(void)
kvm_init_debug();
+ kvm_init_msr_list();
+
if ((bad_page = alloc_page(GFP_KERNEL)) == NULL) {
r = -ENOMEM;
goto out;
#include "vmx.h"
#include "kvm.h"
+#undef MMU_DEBUG
+
+#undef AUDIT
+
+#ifdef AUDIT
+static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg);
+#else
+static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg) {}
+#endif
+
+#ifdef MMU_DEBUG
+
+#define pgprintk(x...) do { if (dbg) printk(x); } while (0)
+#define rmap_printk(x...) do { if (dbg) printk(x); } while (0)
+
+#else
+
#define pgprintk(x...) do { } while (0)
+#define rmap_printk(x...) do { } while (0)
+
+#endif
+
+#if defined(MMU_DEBUG) || defined(AUDIT)
+static int dbg = 1;
+#endif
#define ASSERT(x) \
if (!(x)) { \
__FILE__, __LINE__, #x); \
}
-#define PT64_ENT_PER_PAGE 512
-#define PT32_ENT_PER_PAGE 1024
+#define PT64_PT_BITS 9
+#define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
+#define PT32_PT_BITS 10
+#define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
#define PT_WRITABLE_SHIFT 1
#define PFERR_PRESENT_MASK (1U << 0)
#define PFERR_WRITE_MASK (1U << 1)
#define PFERR_USER_MASK (1U << 2)
+#define PFERR_FETCH_MASK (1U << 4)
#define PT64_ROOT_LEVEL 4
#define PT32_ROOT_LEVEL 2
#define PT_DIRECTORY_LEVEL 2
#define PT_PAGE_TABLE_LEVEL 1
+#define RMAP_EXT 4
+
+struct kvm_rmap_desc {
+ u64 *shadow_ptes[RMAP_EXT];
+ struct kvm_rmap_desc *more;
+};
+
static int is_write_protection(struct kvm_vcpu *vcpu)
{
return vcpu->cr0 & CR0_WP_MASK;
return 1;
}
+static int is_nx(struct kvm_vcpu *vcpu)
+{
+ return vcpu->shadow_efer & EFER_NX;
+}
+
static int is_present_pte(unsigned long pte)
{
return pte & PT_PRESENT_MASK;
return pte & PT_SHADOW_IO_MARK;
}
+static int is_rmap_pte(u64 pte)
+{
+ return (pte & (PT_WRITABLE_MASK | PT_PRESENT_MASK))
+ == (PT_WRITABLE_MASK | PT_PRESENT_MASK);
+}
+
+static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
+ size_t objsize, int min)
+{
+ void *obj;
+
+ if (cache->nobjs >= min)
+ return 0;
+ while (cache->nobjs < ARRAY_SIZE(cache->objects)) {
+ obj = kzalloc(objsize, GFP_NOWAIT);
+ if (!obj)
+ return -ENOMEM;
+ cache->objects[cache->nobjs++] = obj;
+ }
+ return 0;
+}
+
+static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc)
+{
+ while (mc->nobjs)
+ kfree(mc->objects[--mc->nobjs]);
+}
+
+static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu)
+{
+ int r;
+
+ r = mmu_topup_memory_cache(&vcpu->mmu_pte_chain_cache,
+ sizeof(struct kvm_pte_chain), 4);
+ if (r)
+ goto out;
+ r = mmu_topup_memory_cache(&vcpu->mmu_rmap_desc_cache,
+ sizeof(struct kvm_rmap_desc), 1);
+out:
+ return r;
+}
+
+static void mmu_free_memory_caches(struct kvm_vcpu *vcpu)
+{
+ mmu_free_memory_cache(&vcpu->mmu_pte_chain_cache);
+ mmu_free_memory_cache(&vcpu->mmu_rmap_desc_cache);
+}
+
+static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc,
+ size_t size)
+{
+ void *p;
+
+ BUG_ON(!mc->nobjs);
+ p = mc->objects[--mc->nobjs];
+ memset(p, 0, size);
+ return p;
+}
+
+static void mmu_memory_cache_free(struct kvm_mmu_memory_cache *mc, void *obj)
+{
+ if (mc->nobjs < KVM_NR_MEM_OBJS)
+ mc->objects[mc->nobjs++] = obj;
+ else
+ kfree(obj);
+}
+
+static struct kvm_pte_chain *mmu_alloc_pte_chain(struct kvm_vcpu *vcpu)
+{
+ return mmu_memory_cache_alloc(&vcpu->mmu_pte_chain_cache,
+ sizeof(struct kvm_pte_chain));
+}
+
+static void mmu_free_pte_chain(struct kvm_vcpu *vcpu,
+ struct kvm_pte_chain *pc)
+{
+ mmu_memory_cache_free(&vcpu->mmu_pte_chain_cache, pc);
+}
+
+static struct kvm_rmap_desc *mmu_alloc_rmap_desc(struct kvm_vcpu *vcpu)
+{
+ return mmu_memory_cache_alloc(&vcpu->mmu_rmap_desc_cache,
+ sizeof(struct kvm_rmap_desc));
+}
+
+static void mmu_free_rmap_desc(struct kvm_vcpu *vcpu,
+ struct kvm_rmap_desc *rd)
+{
+ mmu_memory_cache_free(&vcpu->mmu_rmap_desc_cache, rd);
+}
+
+/*
+ * Reverse mapping data structures:
+ *
+ * If page->private bit zero is zero, then page->private points to the
+ * shadow page table entry that points to page_address(page).
+ *
+ * If page->private bit zero is one, (then page->private & ~1) points
+ * to a struct kvm_rmap_desc containing more mappings.
+ */
+static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte)
+{
+ struct page *page;
+ struct kvm_rmap_desc *desc;
+ int i;
+
+ if (!is_rmap_pte(*spte))
+ return;
+ page = pfn_to_page((*spte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT);
+ if (!page->private) {
+ rmap_printk("rmap_add: %p %llx 0->1\n", spte, *spte);
+ page->private = (unsigned long)spte;
+ } else if (!(page->private & 1)) {
+ rmap_printk("rmap_add: %p %llx 1->many\n", spte, *spte);
+ desc = mmu_alloc_rmap_desc(vcpu);
+ desc->shadow_ptes[0] = (u64 *)page->private;
+ desc->shadow_ptes[1] = spte;
+ page->private = (unsigned long)desc | 1;
+ } else {
+ rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
+ desc = (struct kvm_rmap_desc *)(page->private & ~1ul);
+ while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+ desc = desc->more;
+ if (desc->shadow_ptes[RMAP_EXT-1]) {
+ desc->more = mmu_alloc_rmap_desc(vcpu);
+ desc = desc->more;
+ }
+ for (i = 0; desc->shadow_ptes[i]; ++i)
+ ;
+ desc->shadow_ptes[i] = spte;
+ }
+}
+
+static void rmap_desc_remove_entry(struct kvm_vcpu *vcpu,
+ struct page *page,
+ struct kvm_rmap_desc *desc,
+ int i,
+ struct kvm_rmap_desc *prev_desc)
+{
+ int j;
+
+ for (j = RMAP_EXT - 1; !desc->shadow_ptes[j] && j > i; --j)
+ ;
+ desc->shadow_ptes[i] = desc->shadow_ptes[j];
+ desc->shadow_ptes[j] = 0;
+ if (j != 0)
+ return;
+ if (!prev_desc && !desc->more)
+ page->private = (unsigned long)desc->shadow_ptes[0];
+ else
+ if (prev_desc)
+ prev_desc->more = desc->more;
+ else
+ page->private = (unsigned long)desc->more | 1;
+ mmu_free_rmap_desc(vcpu, desc);
+}
+
+static void rmap_remove(struct kvm_vcpu *vcpu, u64 *spte)
+{
+ struct page *page;
+ struct kvm_rmap_desc *desc;
+ struct kvm_rmap_desc *prev_desc;
+ int i;
+
+ if (!is_rmap_pte(*spte))
+ return;
+ page = pfn_to_page((*spte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT);
+ if (!page->private) {
+ printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
+ BUG();
+ } else if (!(page->private & 1)) {
+ rmap_printk("rmap_remove: %p %llx 1->0\n", spte, *spte);
+ if ((u64 *)page->private != spte) {
+ printk(KERN_ERR "rmap_remove: %p %llx 1->BUG\n",
+ spte, *spte);
+ BUG();
+ }
+ page->private = 0;
+ } else {
+ rmap_printk("rmap_remove: %p %llx many->many\n", spte, *spte);
+ desc = (struct kvm_rmap_desc *)(page->private & ~1ul);
+ prev_desc = NULL;
+ while (desc) {
+ for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i)
+ if (desc->shadow_ptes[i] == spte) {
+ rmap_desc_remove_entry(vcpu, page,
+ desc, i,
+ prev_desc);
+ return;
+ }
+ prev_desc = desc;
+ desc = desc->more;
+ }
+ BUG();
+ }
+}
+
+static void rmap_write_protect(struct kvm_vcpu *vcpu, u64 gfn)
+{
+ struct kvm *kvm = vcpu->kvm;
+ struct page *page;
+ struct kvm_memory_slot *slot;
+ struct kvm_rmap_desc *desc;
+ u64 *spte;
+
+ slot = gfn_to_memslot(kvm, gfn);
+ BUG_ON(!slot);
+ page = gfn_to_page(slot, gfn);
+
+ while (page->private) {
+ if (!(page->private & 1))
+ spte = (u64 *)page->private;
+ else {
+ desc = (struct kvm_rmap_desc *)(page->private & ~1ul);
+ spte = desc->shadow_ptes[0];
+ }
+ BUG_ON(!spte);
+ BUG_ON((*spte & PT64_BASE_ADDR_MASK) !=
+ page_to_pfn(page) << PAGE_SHIFT);
+ BUG_ON(!(*spte & PT_PRESENT_MASK));
+ BUG_ON(!(*spte & PT_WRITABLE_MASK));
+ rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
+ rmap_remove(vcpu, spte);
+ kvm_arch_ops->tlb_flush(vcpu);
+ *spte &= ~(u64)PT_WRITABLE_MASK;
+ }
+}
+
+static int is_empty_shadow_page(hpa_t page_hpa)
+{
+ u64 *pos;
+ u64 *end;
+
+ for (pos = __va(page_hpa), end = pos + PAGE_SIZE / sizeof(u64);
+ pos != end; pos++)
+ if (*pos != 0) {
+ printk(KERN_ERR "%s: %p %llx\n", __FUNCTION__,
+ pos, *pos);
+ return 0;
+ }
+ return 1;
+}
+
static void kvm_mmu_free_page(struct kvm_vcpu *vcpu, hpa_t page_hpa)
{
struct kvm_mmu_page *page_head = page_header(page_hpa);
+ ASSERT(is_empty_shadow_page(page_hpa));
list_del(&page_head->link);
page_head->page_hpa = page_hpa;
list_add(&page_head->link, &vcpu->free_pages);
+ ++vcpu->kvm->n_free_mmu_pages;
}
-static int is_empty_shadow_page(hpa_t page_hpa)
+static unsigned kvm_page_table_hashfn(gfn_t gfn)
{
- u32 *pos;
- u32 *end;
- for (pos = __va(page_hpa), end = pos + PAGE_SIZE / sizeof(u32);
- pos != end; pos++)
- if (*pos != 0)
- return 0;
- return 1;
+ return gfn;
}
-static hpa_t kvm_mmu_alloc_page(struct kvm_vcpu *vcpu, u64 *parent_pte)
+static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
+ u64 *parent_pte)
{
struct kvm_mmu_page *page;
if (list_empty(&vcpu->free_pages))
- return INVALID_PAGE;
+ return NULL;
page = list_entry(vcpu->free_pages.next, struct kvm_mmu_page, link);
list_del(&page->link);
ASSERT(is_empty_shadow_page(page->page_hpa));
page->slot_bitmap = 0;
page->global = 1;
+ page->multimapped = 0;
page->parent_pte = parent_pte;
- return page->page_hpa;
+ --vcpu->kvm->n_free_mmu_pages;
+ return page;
+}
+
+static void mmu_page_add_parent_pte(struct kvm_vcpu *vcpu,
+ struct kvm_mmu_page *page, u64 *parent_pte)
+{
+ struct kvm_pte_chain *pte_chain;
+ struct hlist_node *node;
+ int i;
+
+ if (!parent_pte)
+ return;
+ if (!page->multimapped) {
+ u64 *old = page->parent_pte;
+
+ if (!old) {
+ page->parent_pte = parent_pte;
+ return;
+ }
+ page->multimapped = 1;
+ pte_chain = mmu_alloc_pte_chain(vcpu);
+ INIT_HLIST_HEAD(&page->parent_ptes);
+ hlist_add_head(&pte_chain->link, &page->parent_ptes);
+ pte_chain->parent_ptes[0] = old;
+ }
+ hlist_for_each_entry(pte_chain, node, &page->parent_ptes, link) {
+ if (pte_chain->parent_ptes[NR_PTE_CHAIN_ENTRIES-1])
+ continue;
+ for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i)
+ if (!pte_chain->parent_ptes[i]) {
+ pte_chain->parent_ptes[i] = parent_pte;
+ return;
+ }
+ }
+ pte_chain = mmu_alloc_pte_chain(vcpu);
+ BUG_ON(!pte_chain);
+ hlist_add_head(&pte_chain->link, &page->parent_ptes);
+ pte_chain->parent_ptes[0] = parent_pte;
+}
+
+static void mmu_page_remove_parent_pte(struct kvm_vcpu *vcpu,
+ struct kvm_mmu_page *page,
+ u64 *parent_pte)
+{
+ struct kvm_pte_chain *pte_chain;
+ struct hlist_node *node;
+ int i;
+
+ if (!page->multimapped) {
+ BUG_ON(page->parent_pte != parent_pte);
+ page->parent_pte = NULL;
+ return;
+ }
+ hlist_for_each_entry(pte_chain, node, &page->parent_ptes, link)
+ for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i) {
+ if (!pte_chain->parent_ptes[i])
+ break;
+ if (pte_chain->parent_ptes[i] != parent_pte)
+ continue;
+ while (i + 1 < NR_PTE_CHAIN_ENTRIES
+ && pte_chain->parent_ptes[i + 1]) {
+ pte_chain->parent_ptes[i]
+ = pte_chain->parent_ptes[i + 1];
+ ++i;
+ }
+ pte_chain->parent_ptes[i] = NULL;
+ if (i == 0) {
+ hlist_del(&pte_chain->link);
+ mmu_free_pte_chain(vcpu, pte_chain);
+ if (hlist_empty(&page->parent_ptes)) {
+ page->multimapped = 0;
+ page->parent_pte = NULL;
+ }
+ }
+ return;
+ }
+ BUG();
+}
+
+static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm_vcpu *vcpu,
+ gfn_t gfn)
+{
+ unsigned index;
+ struct hlist_head *bucket;
+ struct kvm_mmu_page *page;
+ struct hlist_node *node;
+
+ pgprintk("%s: looking for gfn %lx\n", __FUNCTION__, gfn);
+ index = kvm_page_table_hashfn(gfn) % KVM_NUM_MMU_PAGES;
+ bucket = &vcpu->kvm->mmu_page_hash[index];
+ hlist_for_each_entry(page, node, bucket, hash_link)
+ if (page->gfn == gfn && !page->role.metaphysical) {
+ pgprintk("%s: found role %x\n",
+ __FUNCTION__, page->role.word);
+ return page;
+ }
+ return NULL;
+}
+
+static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
+ gfn_t gfn,
+ gva_t gaddr,
+ unsigned level,
+ int metaphysical,
+ u64 *parent_pte)
+{
+ union kvm_mmu_page_role role;
+ unsigned index;
+ unsigned quadrant;
+ struct hlist_head *bucket;
+ struct kvm_mmu_page *page;
+ struct hlist_node *node;
+
+ role.word = 0;
+ role.glevels = vcpu->mmu.root_level;
+ role.level = level;
+ role.metaphysical = metaphysical;
+ if (vcpu->mmu.root_level <= PT32_ROOT_LEVEL) {
+ quadrant = gaddr >> (PAGE_SHIFT + (PT64_PT_BITS * level));
+ quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
+ role.quadrant = quadrant;
+ }
+ pgprintk("%s: looking gfn %lx role %x\n", __FUNCTION__,
+ gfn, role.word);
+ index = kvm_page_table_hashfn(gfn) % KVM_NUM_MMU_PAGES;
+ bucket = &vcpu->kvm->mmu_page_hash[index];
+ hlist_for_each_entry(page, node, bucket, hash_link)
+ if (page->gfn == gfn && page->role.word == role.word) {
+ mmu_page_add_parent_pte(vcpu, page, parent_pte);
+ pgprintk("%s: found\n", __FUNCTION__);
+ return page;
+ }
+ page = kvm_mmu_alloc_page(vcpu, parent_pte);
+ if (!page)
+ return page;
+ pgprintk("%s: adding gfn %lx role %x\n", __FUNCTION__, gfn, role.word);
+ page->gfn = gfn;
+ page->role = role;
+ hlist_add_head(&page->hash_link, bucket);
+ if (!metaphysical)
+ rmap_write_protect(vcpu, gfn);
+ return page;
+}
+
+static void kvm_mmu_page_unlink_children(struct kvm_vcpu *vcpu,
+ struct kvm_mmu_page *page)
+{
+ unsigned i;
+ u64 *pt;
+ u64 ent;
+
+ pt = __va(page->page_hpa);
+
+ if (page->role.level == PT_PAGE_TABLE_LEVEL) {
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+ if (pt[i] & PT_PRESENT_MASK)
+ rmap_remove(vcpu, &pt[i]);
+ pt[i] = 0;
+ }
+ kvm_arch_ops->tlb_flush(vcpu);
+ return;
+ }
+
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+ ent = pt[i];
+
+ pt[i] = 0;
+ if (!(ent & PT_PRESENT_MASK))
+ continue;
+ ent &= PT64_BASE_ADDR_MASK;
+ mmu_page_remove_parent_pte(vcpu, page_header(ent), &pt[i]);
+ }
+}
+
+static void kvm_mmu_put_page(struct kvm_vcpu *vcpu,
+ struct kvm_mmu_page *page,
+ u64 *parent_pte)
+{
+ mmu_page_remove_parent_pte(vcpu, page, parent_pte);
+}
+
+static void kvm_mmu_zap_page(struct kvm_vcpu *vcpu,
+ struct kvm_mmu_page *page)
+{
+ u64 *parent_pte;
+
+ while (page->multimapped || page->parent_pte) {
+ if (!page->multimapped)
+ parent_pte = page->parent_pte;
+ else {
+ struct kvm_pte_chain *chain;
+
+ chain = container_of(page->parent_ptes.first,
+ struct kvm_pte_chain, link);
+ parent_pte = chain->parent_ptes[0];
+ }
+ BUG_ON(!parent_pte);
+ kvm_mmu_put_page(vcpu, page, parent_pte);
+ *parent_pte = 0;
+ }
+ kvm_mmu_page_unlink_children(vcpu, page);
+ if (!page->root_count) {
+ hlist_del(&page->hash_link);
+ kvm_mmu_free_page(vcpu, page->page_hpa);
+ } else {
+ list_del(&page->link);
+ list_add(&page->link, &vcpu->kvm->active_mmu_pages);
+ }
+}
+
+static int kvm_mmu_unprotect_page(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+ unsigned index;
+ struct hlist_head *bucket;
+ struct kvm_mmu_page *page;
+ struct hlist_node *node, *n;
+ int r;
+
+ pgprintk("%s: looking for gfn %lx\n", __FUNCTION__, gfn);
+ r = 0;
+ index = kvm_page_table_hashfn(gfn) % KVM_NUM_MMU_PAGES;
+ bucket = &vcpu->kvm->mmu_page_hash[index];
+ hlist_for_each_entry_safe(page, node, n, bucket, hash_link)
+ if (page->gfn == gfn && !page->role.metaphysical) {
+ pgprintk("%s: gfn %lx role %x\n", __FUNCTION__, gfn,
+ page->role.word);
+ kvm_mmu_zap_page(vcpu, page);
+ r = 1;
+ }
+ return r;
}
static void page_header_update_slot(struct kvm *kvm, void *pte, gpa_t gpa)
return gpa_to_hpa(vcpu, gpa);
}
-
-static void release_pt_page_64(struct kvm_vcpu *vcpu, hpa_t page_hpa,
- int level)
-{
- ASSERT(vcpu);
- ASSERT(VALID_PAGE(page_hpa));
- ASSERT(level <= PT64_ROOT_LEVEL && level > 0);
-
- if (level == 1)
- memset(__va(page_hpa), 0, PAGE_SIZE);
- else {
- u64 *pos;
- u64 *end;
-
- for (pos = __va(page_hpa), end = pos + PT64_ENT_PER_PAGE;
- pos != end; pos++) {
- u64 current_ent = *pos;
-
- *pos = 0;
- if (is_present_pte(current_ent))
- release_pt_page_64(vcpu,
- current_ent &
- PT64_BASE_ADDR_MASK,
- level - 1);
- }
- }
- kvm_mmu_free_page(vcpu, page_hpa);
-}
-
static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
{
}
for (; ; level--) {
u32 index = PT64_INDEX(v, level);
u64 *table;
+ u64 pte;
ASSERT(VALID_PAGE(table_addr));
table = __va(table_addr);
if (level == 1) {
+ pte = table[index];
+ if (is_present_pte(pte) && is_writeble_pte(pte))
+ return 0;
mark_page_dirty(vcpu->kvm, v >> PAGE_SHIFT);
page_header_update_slot(vcpu->kvm, table, v);
table[index] = p | PT_PRESENT_MASK | PT_WRITABLE_MASK |
PT_USER_MASK;
+ rmap_add(vcpu, &table[index]);
return 0;
}
if (table[index] == 0) {
- hpa_t new_table = kvm_mmu_alloc_page(vcpu,
- &table[index]);
-
- if (!VALID_PAGE(new_table)) {
+ struct kvm_mmu_page *new_table;
+ gfn_t pseudo_gfn;
+
+ pseudo_gfn = (v & PT64_DIR_BASE_ADDR_MASK)
+ >> PAGE_SHIFT;
+ new_table = kvm_mmu_get_page(vcpu, pseudo_gfn,
+ v, level - 1,
+ 1, &table[index]);
+ if (!new_table) {
pgprintk("nonpaging_map: ENOMEM\n");
return -ENOMEM;
}
- if (level == PT32E_ROOT_LEVEL)
- table[index] = new_table | PT_PRESENT_MASK;
- else
- table[index] = new_table | PT_PRESENT_MASK |
- PT_WRITABLE_MASK | PT_USER_MASK;
+ table[index] = new_table->page_hpa | PT_PRESENT_MASK
+ | PT_WRITABLE_MASK | PT_USER_MASK;
}
table_addr = table[index] & PT64_BASE_ADDR_MASK;
}
}
-static void nonpaging_flush(struct kvm_vcpu *vcpu)
+static void mmu_free_roots(struct kvm_vcpu *vcpu)
{
- hpa_t root = vcpu->mmu.root_hpa;
+ int i;
+ struct kvm_mmu_page *page;
- ++kvm_stat.tlb_flush;
- pgprintk("nonpaging_flush\n");
- ASSERT(VALID_PAGE(root));
- release_pt_page_64(vcpu, root, vcpu->mmu.shadow_root_level);
- root = kvm_mmu_alloc_page(vcpu, NULL);
- ASSERT(VALID_PAGE(root));
- vcpu->mmu.root_hpa = root;
- if (is_paging(vcpu))
- root |= (vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK));
- kvm_arch_ops->set_cr3(vcpu, root);
- kvm_arch_ops->tlb_flush(vcpu);
+#ifdef CONFIG_X86_64
+ if (vcpu->mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+ hpa_t root = vcpu->mmu.root_hpa;
+
+ ASSERT(VALID_PAGE(root));
+ page = page_header(root);
+ --page->root_count;
+ vcpu->mmu.root_hpa = INVALID_PAGE;
+ return;
+ }
+#endif
+ for (i = 0; i < 4; ++i) {
+ hpa_t root = vcpu->mmu.pae_root[i];
+
+ ASSERT(VALID_PAGE(root));
+ root &= PT64_BASE_ADDR_MASK;
+ page = page_header(root);
+ --page->root_count;
+ vcpu->mmu.pae_root[i] = INVALID_PAGE;
+ }
+ vcpu->mmu.root_hpa = INVALID_PAGE;
+}
+
+static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
+{
+ int i;
+ gfn_t root_gfn;
+ struct kvm_mmu_page *page;
+
+ root_gfn = vcpu->cr3 >> PAGE_SHIFT;
+
+#ifdef CONFIG_X86_64
+ if (vcpu->mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+ hpa_t root = vcpu->mmu.root_hpa;
+
+ ASSERT(!VALID_PAGE(root));
+ page = kvm_mmu_get_page(vcpu, root_gfn, 0,
+ PT64_ROOT_LEVEL, 0, NULL);
+ root = page->page_hpa;
+ ++page->root_count;
+ vcpu->mmu.root_hpa = root;
+ return;
+ }
+#endif
+ for (i = 0; i < 4; ++i) {
+ hpa_t root = vcpu->mmu.pae_root[i];
+
+ ASSERT(!VALID_PAGE(root));
+ if (vcpu->mmu.root_level == PT32E_ROOT_LEVEL)
+ root_gfn = vcpu->pdptrs[i] >> PAGE_SHIFT;
+ else if (vcpu->mmu.root_level == 0)
+ root_gfn = 0;
+ page = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
+ PT32_ROOT_LEVEL, !is_paging(vcpu),
+ NULL);
+ root = page->page_hpa;
+ ++page->root_count;
+ vcpu->mmu.pae_root[i] = root | PT_PRESENT_MASK;
+ }
+ vcpu->mmu.root_hpa = __pa(vcpu->mmu.pae_root);
}
static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr)
static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
u32 error_code)
{
- int ret;
gpa_t addr = gva;
+ hpa_t paddr;
+ int r;
+
+ r = mmu_topup_memory_caches(vcpu);
+ if (r)
+ return r;
ASSERT(vcpu);
ASSERT(VALID_PAGE(vcpu->mmu.root_hpa));
- for (;;) {
- hpa_t paddr;
-
- paddr = gpa_to_hpa(vcpu , addr & PT64_BASE_ADDR_MASK);
- if (is_error_hpa(paddr))
- return 1;
+ paddr = gpa_to_hpa(vcpu , addr & PT64_BASE_ADDR_MASK);
- ret = nonpaging_map(vcpu, addr & PAGE_MASK, paddr);
- if (ret) {
- nonpaging_flush(vcpu);
- continue;
- }
- break;
- }
- return ret;
-}
+ if (is_error_hpa(paddr))
+ return 1;
-static void nonpaging_inval_page(struct kvm_vcpu *vcpu, gva_t addr)
-{
+ return nonpaging_map(vcpu, addr & PAGE_MASK, paddr);
}
static void nonpaging_free(struct kvm_vcpu *vcpu)
{
- hpa_t root;
-
- ASSERT(vcpu);
- root = vcpu->mmu.root_hpa;
- if (VALID_PAGE(root))
- release_pt_page_64(vcpu, root, vcpu->mmu.shadow_root_level);
- vcpu->mmu.root_hpa = INVALID_PAGE;
+ mmu_free_roots(vcpu);
}
static int nonpaging_init_context(struct kvm_vcpu *vcpu)
context->new_cr3 = nonpaging_new_cr3;
context->page_fault = nonpaging_page_fault;
- context->inval_page = nonpaging_inval_page;
context->gva_to_gpa = nonpaging_gva_to_gpa;
context->free = nonpaging_free;
- context->root_level = PT32E_ROOT_LEVEL;
+ context->root_level = 0;
context->shadow_root_level = PT32E_ROOT_LEVEL;
- context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ mmu_alloc_roots(vcpu);
ASSERT(VALID_PAGE(context->root_hpa));
kvm_arch_ops->set_cr3(vcpu, context->root_hpa);
return 0;
}
-
static void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu)
{
- struct kvm_mmu_page *page, *npage;
-
- list_for_each_entry_safe(page, npage, &vcpu->kvm->active_mmu_pages,
- link) {
- if (page->global)
- continue;
-
- if (!page->parent_pte)
- continue;
-
- *page->parent_pte = 0;
- release_pt_page_64(vcpu, page->page_hpa, 1);
- }
++kvm_stat.tlb_flush;
kvm_arch_ops->tlb_flush(vcpu);
}
static void paging_new_cr3(struct kvm_vcpu *vcpu)
{
+ pgprintk("%s: cr3 %lx\n", __FUNCTION__, vcpu->cr3);
+ mmu_free_roots(vcpu);
+ if (unlikely(vcpu->kvm->n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
+ kvm_mmu_free_some_pages(vcpu);
+ mmu_alloc_roots(vcpu);
kvm_mmu_flush_tlb(vcpu);
+ kvm_arch_ops->set_cr3(vcpu, vcpu->mmu.root_hpa);
}
static void mark_pagetable_nonglobal(void *shadow_pte)
u64 *shadow_pte,
gpa_t gaddr,
int dirty,
- u64 access_bits)
+ u64 access_bits,
+ gfn_t gfn)
{
hpa_t paddr;
if (!dirty)
access_bits &= ~PT_WRITABLE_MASK;
- if (access_bits & PT_WRITABLE_MASK)
- mark_page_dirty(vcpu->kvm, gaddr >> PAGE_SHIFT);
+ paddr = gpa_to_hpa(vcpu, gaddr & PT64_BASE_ADDR_MASK);
*shadow_pte |= access_bits;
- paddr = gpa_to_hpa(vcpu, gaddr & PT64_BASE_ADDR_MASK);
-
if (!(*shadow_pte & PT_GLOBAL_MASK))
mark_pagetable_nonglobal(shadow_pte);
*shadow_pte |= gaddr;
*shadow_pte |= PT_SHADOW_IO_MARK;
*shadow_pte &= ~PT_PRESENT_MASK;
- } else {
- *shadow_pte |= paddr;
- page_header_update_slot(vcpu->kvm, shadow_pte, gaddr);
+ return;
}
+
+ *shadow_pte |= paddr;
+
+ if (access_bits & PT_WRITABLE_MASK) {
+ struct kvm_mmu_page *shadow;
+
+ shadow = kvm_mmu_lookup_page(vcpu, gfn);
+ if (shadow) {
+ pgprintk("%s: found shadow page for %lx, marking ro\n",
+ __FUNCTION__, gfn);
+ access_bits &= ~PT_WRITABLE_MASK;
+ if (is_writeble_pte(*shadow_pte)) {
+ *shadow_pte &= ~PT_WRITABLE_MASK;
+ kvm_arch_ops->tlb_flush(vcpu);
+ }
+ }
+ }
+
+ if (access_bits & PT_WRITABLE_MASK)
+ mark_page_dirty(vcpu->kvm, gaddr >> PAGE_SHIFT);
+
+ page_header_update_slot(vcpu->kvm, shadow_pte, gaddr);
+ rmap_add(vcpu, shadow_pte);
}
static void inject_page_fault(struct kvm_vcpu *vcpu,
return 0;
}
-static int may_access(u64 pte, int write, int user)
-{
-
- if (user && !(pte & PT_USER_MASK))
- return 0;
- if (write && !(pte & PT_WRITABLE_MASK))
- return 0;
- return 1;
-}
-
-/*
- * Remove a shadow pte.
- */
-static void paging_inval_page(struct kvm_vcpu *vcpu, gva_t addr)
-{
- hpa_t page_addr = vcpu->mmu.root_hpa;
- int level = vcpu->mmu.shadow_root_level;
-
- ++kvm_stat.invlpg;
-
- for (; ; level--) {
- u32 index = PT64_INDEX(addr, level);
- u64 *table = __va(page_addr);
-
- if (level == PT_PAGE_TABLE_LEVEL ) {
- table[index] = 0;
- return;
- }
-
- if (!is_present_pte(table[index]))
- return;
-
- page_addr = table[index] & PT64_BASE_ADDR_MASK;
-
- if (level == PT_DIRECTORY_LEVEL &&
- (table[index] & PT_SHADOW_PS_MARK)) {
- table[index] = 0;
- release_pt_page_64(vcpu, page_addr, PT_PAGE_TABLE_LEVEL);
-
- kvm_arch_ops->tlb_flush(vcpu);
- return;
- }
- }
-}
-
static void paging_free(struct kvm_vcpu *vcpu)
{
nonpaging_free(vcpu);
#include "paging_tmpl.h"
#undef PTTYPE
-static int paging64_init_context(struct kvm_vcpu *vcpu)
+static int paging64_init_context_common(struct kvm_vcpu *vcpu, int level)
{
struct kvm_mmu *context = &vcpu->mmu;
ASSERT(is_pae(vcpu));
context->new_cr3 = paging_new_cr3;
context->page_fault = paging64_page_fault;
- context->inval_page = paging_inval_page;
context->gva_to_gpa = paging64_gva_to_gpa;
context->free = paging_free;
- context->root_level = PT64_ROOT_LEVEL;
- context->shadow_root_level = PT64_ROOT_LEVEL;
- context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ context->root_level = level;
+ context->shadow_root_level = level;
+ mmu_alloc_roots(vcpu);
ASSERT(VALID_PAGE(context->root_hpa));
kvm_arch_ops->set_cr3(vcpu, context->root_hpa |
(vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK)));
return 0;
}
+static int paging64_init_context(struct kvm_vcpu *vcpu)
+{
+ return paging64_init_context_common(vcpu, PT64_ROOT_LEVEL);
+}
+
static int paging32_init_context(struct kvm_vcpu *vcpu)
{
struct kvm_mmu *context = &vcpu->mmu;
context->new_cr3 = paging_new_cr3;
context->page_fault = paging32_page_fault;
- context->inval_page = paging_inval_page;
context->gva_to_gpa = paging32_gva_to_gpa;
context->free = paging_free;
context->root_level = PT32_ROOT_LEVEL;
context->shadow_root_level = PT32E_ROOT_LEVEL;
- context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ mmu_alloc_roots(vcpu);
ASSERT(VALID_PAGE(context->root_hpa));
kvm_arch_ops->set_cr3(vcpu, context->root_hpa |
(vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK)));
static int paging32E_init_context(struct kvm_vcpu *vcpu)
{
- int ret;
-
- if ((ret = paging64_init_context(vcpu)))
- return ret;
-
- vcpu->mmu.root_level = PT32E_ROOT_LEVEL;
- vcpu->mmu.shadow_root_level = PT32E_ROOT_LEVEL;
- return 0;
+ return paging64_init_context_common(vcpu, PT32E_ROOT_LEVEL);
}
static int init_kvm_mmu(struct kvm_vcpu *vcpu)
if (!is_paging(vcpu))
return nonpaging_init_context(vcpu);
- else if (kvm_arch_ops->is_long_mode(vcpu))
+ else if (is_long_mode(vcpu))
return paging64_init_context(vcpu);
else if (is_pae(vcpu))
return paging32E_init_context(vcpu);
int kvm_mmu_reset_context(struct kvm_vcpu *vcpu)
{
+ int r;
+
destroy_kvm_mmu(vcpu);
- return init_kvm_mmu(vcpu);
+ r = init_kvm_mmu(vcpu);
+ if (r < 0)
+ goto out;
+ r = mmu_topup_memory_caches(vcpu);
+out:
+ return r;
}
-static void free_mmu_pages(struct kvm_vcpu *vcpu)
+void kvm_mmu_pre_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes)
{
- while (!list_empty(&vcpu->free_pages)) {
+ gfn_t gfn = gpa >> PAGE_SHIFT;
+ struct kvm_mmu_page *page;
+ struct kvm_mmu_page *child;
+ struct hlist_node *node, *n;
+ struct hlist_head *bucket;
+ unsigned index;
+ u64 *spte;
+ u64 pte;
+ unsigned offset = offset_in_page(gpa);
+ unsigned pte_size;
+ unsigned page_offset;
+ unsigned misaligned;
+ int level;
+ int flooded = 0;
+
+ pgprintk("%s: gpa %llx bytes %d\n", __FUNCTION__, gpa, bytes);
+ if (gfn == vcpu->last_pt_write_gfn) {
+ ++vcpu->last_pt_write_count;
+ if (vcpu->last_pt_write_count >= 3)
+ flooded = 1;
+ } else {
+ vcpu->last_pt_write_gfn = gfn;
+ vcpu->last_pt_write_count = 1;
+ }
+ index = kvm_page_table_hashfn(gfn) % KVM_NUM_MMU_PAGES;
+ bucket = &vcpu->kvm->mmu_page_hash[index];
+ hlist_for_each_entry_safe(page, node, n, bucket, hash_link) {
+ if (page->gfn != gfn || page->role.metaphysical)
+ continue;
+ pte_size = page->role.glevels == PT32_ROOT_LEVEL ? 4 : 8;
+ misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
+ if (misaligned || flooded) {
+ /*
+ * Misaligned accesses are too much trouble to fix
+ * up; also, they usually indicate a page is not used
+ * as a page table.
+ *
+ * If we're seeing too many writes to a page,
+ * it may no longer be a page table, or we may be
+ * forking, in which case it is better to unmap the
+ * page.
+ */
+ pgprintk("misaligned: gpa %llx bytes %d role %x\n",
+ gpa, bytes, page->role.word);
+ kvm_mmu_zap_page(vcpu, page);
+ continue;
+ }
+ page_offset = offset;
+ level = page->role.level;
+ if (page->role.glevels == PT32_ROOT_LEVEL) {
+ page_offset <<= 1; /* 32->64 */
+ page_offset &= ~PAGE_MASK;
+ }
+ spte = __va(page->page_hpa);
+ spte += page_offset / sizeof(*spte);
+ pte = *spte;
+ if (is_present_pte(pte)) {
+ if (level == PT_PAGE_TABLE_LEVEL)
+ rmap_remove(vcpu, spte);
+ else {
+ child = page_header(pte & PT64_BASE_ADDR_MASK);
+ mmu_page_remove_parent_pte(vcpu, child, spte);
+ }
+ }
+ *spte = 0;
+ }
+}
+
+void kvm_mmu_post_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes)
+{
+}
+
+int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
+{
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, gva);
+
+ return kvm_mmu_unprotect_page(vcpu, gpa >> PAGE_SHIFT);
+}
+
+void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
+{
+ while (vcpu->kvm->n_free_mmu_pages < KVM_REFILL_PAGES) {
struct kvm_mmu_page *page;
+ page = container_of(vcpu->kvm->active_mmu_pages.prev,
+ struct kvm_mmu_page, link);
+ kvm_mmu_zap_page(vcpu, page);
+ }
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_free_some_pages);
+
+static void free_mmu_pages(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu_page *page;
+
+ while (!list_empty(&vcpu->kvm->active_mmu_pages)) {
+ page = container_of(vcpu->kvm->active_mmu_pages.next,
+ struct kvm_mmu_page, link);
+ kvm_mmu_zap_page(vcpu, page);
+ }
+ while (!list_empty(&vcpu->free_pages)) {
page = list_entry(vcpu->free_pages.next,
struct kvm_mmu_page, link);
list_del(&page->link);
__free_page(pfn_to_page(page->page_hpa >> PAGE_SHIFT));
page->page_hpa = INVALID_PAGE;
}
+ free_page((unsigned long)vcpu->mmu.pae_root);
}
static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
{
+ struct page *page;
int i;
ASSERT(vcpu);
for (i = 0; i < KVM_NUM_MMU_PAGES; i++) {
- struct page *page;
struct kvm_mmu_page *page_header = &vcpu->page_header_buf[i];
INIT_LIST_HEAD(&page_header->link);
- if ((page = alloc_page(GFP_KVM_MMU)) == NULL)
+ if ((page = alloc_page(GFP_KERNEL)) == NULL)
goto error_1;
page->private = (unsigned long)page_header;
page_header->page_hpa = (hpa_t)page_to_pfn(page) << PAGE_SHIFT;
memset(__va(page_header->page_hpa), 0, PAGE_SIZE);
list_add(&page_header->link, &vcpu->free_pages);
+ ++vcpu->kvm->n_free_mmu_pages;
}
+
+ /*
+ * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
+ * Therefore we need to allocate shadow page tables in the first
+ * 4GB of memory, which happens to fit the DMA32 zone.
+ */
+ page = alloc_page(GFP_KERNEL | __GFP_DMA32);
+ if (!page)
+ goto error_1;
+ vcpu->mmu.pae_root = page_address(page);
+ for (i = 0; i < 4; ++i)
+ vcpu->mmu.pae_root[i] = INVALID_PAGE;
+
return 0;
error_1:
return -ENOMEM;
}
-int kvm_mmu_init(struct kvm_vcpu *vcpu)
+int kvm_mmu_create(struct kvm_vcpu *vcpu)
{
- int r;
-
ASSERT(vcpu);
ASSERT(!VALID_PAGE(vcpu->mmu.root_hpa));
ASSERT(list_empty(&vcpu->free_pages));
- if ((r = alloc_mmu_pages(vcpu)))
- return r;
+ return alloc_mmu_pages(vcpu);
+}
- if ((r = init_kvm_mmu(vcpu))) {
- free_mmu_pages(vcpu);
- return r;
- }
- return 0;
+int kvm_mmu_setup(struct kvm_vcpu *vcpu)
+{
+ ASSERT(vcpu);
+ ASSERT(!VALID_PAGE(vcpu->mmu.root_hpa));
+ ASSERT(!list_empty(&vcpu->free_pages));
+
+ return init_kvm_mmu(vcpu);
}
void kvm_mmu_destroy(struct kvm_vcpu *vcpu)
destroy_kvm_mmu(vcpu);
free_mmu_pages(vcpu);
+ mmu_free_memory_caches(vcpu);
}
-void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
+void kvm_mmu_slot_remove_write_access(struct kvm_vcpu *vcpu, int slot)
{
+ struct kvm *kvm = vcpu->kvm;
struct kvm_mmu_page *page;
list_for_each_entry(page, &kvm->active_mmu_pages, link) {
pt = __va(page->page_hpa);
for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
/* avoid RMW */
- if (pt[i] & PT_WRITABLE_MASK)
+ if (pt[i] & PT_WRITABLE_MASK) {
+ rmap_remove(vcpu, &pt[i]);
pt[i] &= ~PT_WRITABLE_MASK;
+ }
+ }
+}
+
+#ifdef AUDIT
+
+static const char *audit_msg;
+
+static gva_t canonicalize(gva_t gva)
+{
+#ifdef CONFIG_X86_64
+ gva = (long long)(gva << 16) >> 16;
+#endif
+ return gva;
+}
+
+static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
+ gva_t va, int level)
+{
+ u64 *pt = __va(page_pte & PT64_BASE_ADDR_MASK);
+ int i;
+ gva_t va_delta = 1ul << (PAGE_SHIFT + 9 * (level - 1));
+
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i, va += va_delta) {
+ u64 ent = pt[i];
+
+ if (!ent & PT_PRESENT_MASK)
+ continue;
+ va = canonicalize(va);
+ if (level > 1)
+ audit_mappings_page(vcpu, ent, va, level - 1);
+ else {
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, va);
+ hpa_t hpa = gpa_to_hpa(vcpu, gpa);
+
+ if ((ent & PT_PRESENT_MASK)
+ && (ent & PT64_BASE_ADDR_MASK) != hpa)
+ printk(KERN_ERR "audit error: (%s) levels %d"
+ " gva %lx gpa %llx hpa %llx ent %llx\n",
+ audit_msg, vcpu->mmu.root_level,
+ va, gpa, hpa, ent);
+ }
+ }
+}
+
+static void audit_mappings(struct kvm_vcpu *vcpu)
+{
+ int i;
+
+ if (vcpu->mmu.root_level == 4)
+ audit_mappings_page(vcpu, vcpu->mmu.root_hpa, 0, 4);
+ else
+ for (i = 0; i < 4; ++i)
+ if (vcpu->mmu.pae_root[i] & PT_PRESENT_MASK)
+ audit_mappings_page(vcpu,
+ vcpu->mmu.pae_root[i],
+ i << 30,
+ 2);
+}
+
+static int count_rmaps(struct kvm_vcpu *vcpu)
+{
+ int nmaps = 0;
+ int i, j, k;
+
+ for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
+ struct kvm_memory_slot *m = &vcpu->kvm->memslots[i];
+ struct kvm_rmap_desc *d;
+
+ for (j = 0; j < m->npages; ++j) {
+ struct page *page = m->phys_mem[j];
+
+ if (!page->private)
+ continue;
+ if (!(page->private & 1)) {
+ ++nmaps;
+ continue;
+ }
+ d = (struct kvm_rmap_desc *)(page->private & ~1ul);
+ while (d) {
+ for (k = 0; k < RMAP_EXT; ++k)
+ if (d->shadow_ptes[k])
+ ++nmaps;
+ else
+ break;
+ d = d->more;
+ }
+ }
+ }
+ return nmaps;
+}
+
+static int count_writable_mappings(struct kvm_vcpu *vcpu)
+{
+ int nmaps = 0;
+ struct kvm_mmu_page *page;
+ int i;
+
+ list_for_each_entry(page, &vcpu->kvm->active_mmu_pages, link) {
+ u64 *pt = __va(page->page_hpa);
+
+ if (page->role.level != PT_PAGE_TABLE_LEVEL)
+ continue;
+
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+ u64 ent = pt[i];
+
+ if (!(ent & PT_PRESENT_MASK))
+ continue;
+ if (!(ent & PT_WRITABLE_MASK))
+ continue;
+ ++nmaps;
+ }
}
+ return nmaps;
}
+
+static void audit_rmap(struct kvm_vcpu *vcpu)
+{
+ int n_rmap = count_rmaps(vcpu);
+ int n_actual = count_writable_mappings(vcpu);
+
+ if (n_rmap != n_actual)
+ printk(KERN_ERR "%s: (%s) rmap %d actual %d\n",
+ __FUNCTION__, audit_msg, n_rmap, n_actual);
+}
+
+static void audit_write_protection(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu_page *page;
+
+ list_for_each_entry(page, &vcpu->kvm->active_mmu_pages, link) {
+ hfn_t hfn;
+ struct page *pg;
+
+ if (page->role.metaphysical)
+ continue;
+
+ hfn = gpa_to_hpa(vcpu, (gpa_t)page->gfn << PAGE_SHIFT)
+ >> PAGE_SHIFT;
+ pg = pfn_to_page(hfn);
+ if (pg->private)
+ printk(KERN_ERR "%s: (%s) shadow page has writable"
+ " mappings: gfn %lx role %x\n",
+ __FUNCTION__, audit_msg, page->gfn,
+ page->role.word);
+ }
+}
+
+static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg)
+{
+ int olddbg = dbg;
+
+ dbg = 0;
+ audit_msg = msg;
+ audit_rmap(vcpu);
+ audit_write_protection(vcpu);
+ audit_mappings(vcpu);
+ dbg = olddbg;
+}
+
+#endif
#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
#define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
#define PT_PTE_COPY_MASK PT64_PTE_COPY_MASK
+ #ifdef CONFIG_X86_64
+ #define PT_MAX_FULL_LEVELS 4
+ #else
+ #define PT_MAX_FULL_LEVELS 2
+ #endif
#elif PTTYPE == 32
#define pt_element_t u32
#define guest_walker guest_walker32
#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
#define PT_PTE_COPY_MASK PT32_PTE_COPY_MASK
+ #define PT_MAX_FULL_LEVELS 2
#else
#error Invalid PTTYPE value
#endif
*/
struct guest_walker {
int level;
+ gfn_t table_gfn[PT_MAX_FULL_LEVELS];
pt_element_t *table;
+ pt_element_t *ptep;
pt_element_t inherited_ar;
+ gfn_t gfn;
+ u32 error_code;
};
-static void FNAME(init_walker)(struct guest_walker *walker,
- struct kvm_vcpu *vcpu)
+/*
+ * Fetch a guest pte for a guest virtual address
+ */
+static int FNAME(walk_addr)(struct guest_walker *walker,
+ struct kvm_vcpu *vcpu, gva_t addr,
+ int write_fault, int user_fault, int fetch_fault)
{
hpa_t hpa;
struct kvm_memory_slot *slot;
+ pt_element_t *ptep;
+ pt_element_t root;
+ gfn_t table_gfn;
+ pgprintk("%s: addr %lx\n", __FUNCTION__, addr);
walker->level = vcpu->mmu.root_level;
- slot = gfn_to_memslot(vcpu->kvm,
- (vcpu->cr3 & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT);
- hpa = safe_gpa_to_hpa(vcpu, vcpu->cr3 & PT64_BASE_ADDR_MASK);
+ walker->table = NULL;
+ root = vcpu->cr3;
+#if PTTYPE == 64
+ if (!is_long_mode(vcpu)) {
+ walker->ptep = &vcpu->pdptrs[(addr >> 30) & 3];
+ root = *walker->ptep;
+ if (!(root & PT_PRESENT_MASK))
+ goto not_present;
+ --walker->level;
+ }
+#endif
+ table_gfn = (root & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
+ walker->table_gfn[walker->level - 1] = table_gfn;
+ pgprintk("%s: table_gfn[%d] %lx\n", __FUNCTION__,
+ walker->level - 1, table_gfn);
+ slot = gfn_to_memslot(vcpu->kvm, table_gfn);
+ hpa = safe_gpa_to_hpa(vcpu, root & PT64_BASE_ADDR_MASK);
walker->table = kmap_atomic(pfn_to_page(hpa >> PAGE_SHIFT), KM_USER0);
- ASSERT((!kvm_arch_ops->is_long_mode(vcpu) && is_pae(vcpu)) ||
+ ASSERT((!is_long_mode(vcpu) && is_pae(vcpu)) ||
(vcpu->cr3 & ~(PAGE_MASK | CR3_FLAGS_MASK)) == 0);
- walker->table = (pt_element_t *)( (unsigned long)walker->table |
- (unsigned long)(vcpu->cr3 & ~(PAGE_MASK | CR3_FLAGS_MASK)) );
walker->inherited_ar = PT_USER_MASK | PT_WRITABLE_MASK;
+
+ for (;;) {
+ int index = PT_INDEX(addr, walker->level);
+ hpa_t paddr;
+
+ ptep = &walker->table[index];
+ ASSERT(((unsigned long)walker->table & PAGE_MASK) ==
+ ((unsigned long)ptep & PAGE_MASK));
+
+ if (!is_present_pte(*ptep))
+ goto not_present;
+
+ if (write_fault && !is_writeble_pte(*ptep))
+ if (user_fault || is_write_protection(vcpu))
+ goto access_error;
+
+ if (user_fault && !(*ptep & PT_USER_MASK))
+ goto access_error;
+
+#if PTTYPE == 64
+ if (fetch_fault && is_nx(vcpu) && (*ptep & PT64_NX_MASK))
+ goto access_error;
+#endif
+
+ if (!(*ptep & PT_ACCESSED_MASK))
+ *ptep |= PT_ACCESSED_MASK; /* avoid rmw */
+
+ if (walker->level == PT_PAGE_TABLE_LEVEL) {
+ walker->gfn = (*ptep & PT_BASE_ADDR_MASK)
+ >> PAGE_SHIFT;
+ break;
+ }
+
+ if (walker->level == PT_DIRECTORY_LEVEL
+ && (*ptep & PT_PAGE_SIZE_MASK)
+ && (PTTYPE == 64 || is_pse(vcpu))) {
+ walker->gfn = (*ptep & PT_DIR_BASE_ADDR_MASK)
+ >> PAGE_SHIFT;
+ walker->gfn += PT_INDEX(addr, PT_PAGE_TABLE_LEVEL);
+ break;
+ }
+
+ if (walker->level != 3 || is_long_mode(vcpu))
+ walker->inherited_ar &= walker->table[index];
+ table_gfn = (*ptep & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
+ paddr = safe_gpa_to_hpa(vcpu, *ptep & PT_BASE_ADDR_MASK);
+ kunmap_atomic(walker->table, KM_USER0);
+ walker->table = kmap_atomic(pfn_to_page(paddr >> PAGE_SHIFT),
+ KM_USER0);
+ --walker->level;
+ walker->table_gfn[walker->level - 1 ] = table_gfn;
+ pgprintk("%s: table_gfn[%d] %lx\n", __FUNCTION__,
+ walker->level - 1, table_gfn);
+ }
+ walker->ptep = ptep;
+ pgprintk("%s: pte %llx\n", __FUNCTION__, (u64)*ptep);
+ return 1;
+
+not_present:
+ walker->error_code = 0;
+ goto err;
+
+access_error:
+ walker->error_code = PFERR_PRESENT_MASK;
+
+err:
+ if (write_fault)
+ walker->error_code |= PFERR_WRITE_MASK;
+ if (user_fault)
+ walker->error_code |= PFERR_USER_MASK;
+ if (fetch_fault)
+ walker->error_code |= PFERR_FETCH_MASK;
+ return 0;
}
static void FNAME(release_walker)(struct guest_walker *walker)
{
- kunmap_atomic(walker->table, KM_USER0);
+ if (walker->table)
+ kunmap_atomic(walker->table, KM_USER0);
}
static void FNAME(set_pte)(struct kvm_vcpu *vcpu, u64 guest_pte,
- u64 *shadow_pte, u64 access_bits)
+ u64 *shadow_pte, u64 access_bits, gfn_t gfn)
{
ASSERT(*shadow_pte == 0);
access_bits &= guest_pte;
*shadow_pte = (guest_pte & PT_PTE_COPY_MASK);
set_pte_common(vcpu, shadow_pte, guest_pte & PT_BASE_ADDR_MASK,
- guest_pte & PT_DIRTY_MASK, access_bits);
+ guest_pte & PT_DIRTY_MASK, access_bits, gfn);
}
static void FNAME(set_pde)(struct kvm_vcpu *vcpu, u64 guest_pde,
- u64 *shadow_pte, u64 access_bits,
- int index)
+ u64 *shadow_pte, u64 access_bits, gfn_t gfn)
{
gpa_t gaddr;
ASSERT(*shadow_pte == 0);
access_bits &= guest_pde;
- gaddr = (guest_pde & PT_DIR_BASE_ADDR_MASK) + PAGE_SIZE * index;
+ gaddr = (gpa_t)gfn << PAGE_SHIFT;
if (PTTYPE == 32 && is_cpuid_PSE36())
gaddr |= (guest_pde & PT32_DIR_PSE36_MASK) <<
(32 - PT32_DIR_PSE36_SHIFT);
*shadow_pte = guest_pde & PT_PTE_COPY_MASK;
set_pte_common(vcpu, shadow_pte, gaddr,
- guest_pde & PT_DIRTY_MASK, access_bits);
-}
-
-/*
- * Fetch a guest pte from a specific level in the paging hierarchy.
- */
-static pt_element_t *FNAME(fetch_guest)(struct kvm_vcpu *vcpu,
- struct guest_walker *walker,
- int level,
- gva_t addr)
-{
-
- ASSERT(level > 0 && level <= walker->level);
-
- for (;;) {
- int index = PT_INDEX(addr, walker->level);
- hpa_t paddr;
-
- ASSERT(((unsigned long)walker->table & PAGE_MASK) ==
- ((unsigned long)&walker->table[index] & PAGE_MASK));
- if (level == walker->level ||
- !is_present_pte(walker->table[index]) ||
- (walker->level == PT_DIRECTORY_LEVEL &&
- (walker->table[index] & PT_PAGE_SIZE_MASK) &&
- (PTTYPE == 64 || is_pse(vcpu))))
- return &walker->table[index];
- if (walker->level != 3 || kvm_arch_ops->is_long_mode(vcpu))
- walker->inherited_ar &= walker->table[index];
- paddr = safe_gpa_to_hpa(vcpu, walker->table[index] & PT_BASE_ADDR_MASK);
- kunmap_atomic(walker->table, KM_USER0);
- walker->table = kmap_atomic(pfn_to_page(paddr >> PAGE_SHIFT),
- KM_USER0);
- --walker->level;
- }
+ guest_pde & PT_DIRTY_MASK, access_bits, gfn);
}
/*
hpa_t shadow_addr;
int level;
u64 *prev_shadow_ent = NULL;
+ pt_element_t *guest_ent = walker->ptep;
+
+ if (!is_present_pte(*guest_ent))
+ return NULL;
shadow_addr = vcpu->mmu.root_hpa;
level = vcpu->mmu.shadow_root_level;
+ if (level == PT32E_ROOT_LEVEL) {
+ shadow_addr = vcpu->mmu.pae_root[(addr >> 30) & 3];
+ shadow_addr &= PT64_BASE_ADDR_MASK;
+ --level;
+ }
for (; ; level--) {
u32 index = SHADOW_PT_INDEX(addr, level);
u64 *shadow_ent = ((u64 *)__va(shadow_addr)) + index;
- pt_element_t *guest_ent;
+ struct kvm_mmu_page *shadow_page;
u64 shadow_pte;
+ int metaphysical;
+ gfn_t table_gfn;
if (is_present_pte(*shadow_ent) || is_io_pte(*shadow_ent)) {
if (level == PT_PAGE_TABLE_LEVEL)
continue;
}
- if (PTTYPE == 32 && level > PT32_ROOT_LEVEL) {
- ASSERT(level == PT32E_ROOT_LEVEL);
- guest_ent = FNAME(fetch_guest)(vcpu, walker,
- PT32_ROOT_LEVEL, addr);
- } else
- guest_ent = FNAME(fetch_guest)(vcpu, walker,
- level, addr);
-
- if (!is_present_pte(*guest_ent))
- return NULL;
-
- /* Don't set accessed bit on PAE PDPTRs */
- if (vcpu->mmu.root_level != 3 || walker->level != 3)
- *guest_ent |= PT_ACCESSED_MASK;
-
if (level == PT_PAGE_TABLE_LEVEL) {
if (walker->level == PT_DIRECTORY_LEVEL) {
*prev_shadow_ent |= PT_SHADOW_PS_MARK;
FNAME(set_pde)(vcpu, *guest_ent, shadow_ent,
walker->inherited_ar,
- PT_INDEX(addr, PT_PAGE_TABLE_LEVEL));
+ walker->gfn);
} else {
ASSERT(walker->level == PT_PAGE_TABLE_LEVEL);
- FNAME(set_pte)(vcpu, *guest_ent, shadow_ent, walker->inherited_ar);
+ FNAME(set_pte)(vcpu, *guest_ent, shadow_ent,
+ walker->inherited_ar,
+ walker->gfn);
}
return shadow_ent;
}
- shadow_addr = kvm_mmu_alloc_page(vcpu, shadow_ent);
- if (!VALID_PAGE(shadow_addr))
- return ERR_PTR(-ENOMEM);
- shadow_pte = shadow_addr | PT_PRESENT_MASK;
- if (vcpu->mmu.root_level > 3 || level != 3)
- shadow_pte |= PT_ACCESSED_MASK
- | PT_WRITABLE_MASK | PT_USER_MASK;
+ if (level - 1 == PT_PAGE_TABLE_LEVEL
+ && walker->level == PT_DIRECTORY_LEVEL) {
+ metaphysical = 1;
+ table_gfn = (*guest_ent & PT_BASE_ADDR_MASK)
+ >> PAGE_SHIFT;
+ } else {
+ metaphysical = 0;
+ table_gfn = walker->table_gfn[level - 2];
+ }
+ shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
+ metaphysical, shadow_ent);
+ shadow_addr = shadow_page->page_hpa;
+ shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
+ | PT_WRITABLE_MASK | PT_USER_MASK;
*shadow_ent = shadow_pte;
prev_shadow_ent = shadow_ent;
}
u64 *shadow_ent,
struct guest_walker *walker,
gva_t addr,
- int user)
+ int user,
+ int *write_pt)
{
pt_element_t *guest_ent;
int writable_shadow;
gfn_t gfn;
+ struct kvm_mmu_page *page;
if (is_writeble_pte(*shadow_ent))
- return 0;
+ return !user || (*shadow_ent & PT_USER_MASK);
writable_shadow = *shadow_ent & PT_SHADOW_WRITABLE_MASK;
if (user) {
*shadow_ent &= ~PT_USER_MASK;
}
- guest_ent = FNAME(fetch_guest)(vcpu, walker, PT_PAGE_TABLE_LEVEL, addr);
+ guest_ent = walker->ptep;
if (!is_present_pte(*guest_ent)) {
*shadow_ent = 0;
return 0;
}
- gfn = (*guest_ent & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
+ gfn = walker->gfn;
+
+ if (user) {
+ /*
+ * Usermode page faults won't be for page table updates.
+ */
+ while ((page = kvm_mmu_lookup_page(vcpu, gfn)) != NULL) {
+ pgprintk("%s: zap %lx %x\n",
+ __FUNCTION__, gfn, page->role.word);
+ kvm_mmu_zap_page(vcpu, page);
+ }
+ } else if (kvm_mmu_lookup_page(vcpu, gfn)) {
+ pgprintk("%s: found shadow page for %lx, marking ro\n",
+ __FUNCTION__, gfn);
+ *guest_ent |= PT_DIRTY_MASK;
+ *write_pt = 1;
+ return 0;
+ }
mark_page_dirty(vcpu->kvm, gfn);
*shadow_ent |= PT_WRITABLE_MASK;
*guest_ent |= PT_DIRTY_MASK;
+ rmap_add(vcpu, shadow_ent);
return 1;
}
* - normal guest page fault due to the guest pte marked not present, not
* writable, or not executable
*
- * Returns: 1 if we need to emulate the instruction, 0 otherwise
+ * Returns: 1 if we need to emulate the instruction, 0 otherwise, or
+ * a negative value on error.
*/
static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
u32 error_code)
{
int write_fault = error_code & PFERR_WRITE_MASK;
- int pte_present = error_code & PFERR_PRESENT_MASK;
int user_fault = error_code & PFERR_USER_MASK;
+ int fetch_fault = error_code & PFERR_FETCH_MASK;
struct guest_walker walker;
u64 *shadow_pte;
int fixed;
+ int write_pt = 0;
+ int r;
+
+ pgprintk("%s: addr %lx err %x\n", __FUNCTION__, addr, error_code);
+ kvm_mmu_audit(vcpu, "pre page fault");
+
+ r = mmu_topup_memory_caches(vcpu);
+ if (r)
+ return r;
/*
* Look up the shadow pte for the faulting address.
*/
- for (;;) {
- FNAME(init_walker)(&walker, vcpu);
- shadow_pte = FNAME(fetch)(vcpu, addr, &walker);
- if (IS_ERR(shadow_pte)) { /* must be -ENOMEM */
- nonpaging_flush(vcpu);
- FNAME(release_walker)(&walker);
- continue;
- }
- break;
- }
+ r = FNAME(walk_addr)(&walker, vcpu, addr, write_fault, user_fault,
+ fetch_fault);
/*
* The page is not mapped by the guest. Let the guest handle it.
*/
- if (!shadow_pte) {
- inject_page_fault(vcpu, addr, error_code);
+ if (!r) {
+ pgprintk("%s: guest page fault\n", __FUNCTION__);
+ inject_page_fault(vcpu, addr, walker.error_code);
FNAME(release_walker)(&walker);
return 0;
}
+ shadow_pte = FNAME(fetch)(vcpu, addr, &walker);
+ pgprintk("%s: shadow pte %p %llx\n", __FUNCTION__,
+ shadow_pte, *shadow_pte);
+
/*
* Update the shadow pte.
*/
if (write_fault)
fixed = FNAME(fix_write_pf)(vcpu, shadow_pte, &walker, addr,
- user_fault);
+ user_fault, &write_pt);
else
fixed = fix_read_pf(shadow_pte);
+ pgprintk("%s: updated shadow pte %p %llx\n", __FUNCTION__,
+ shadow_pte, *shadow_pte);
+
FNAME(release_walker)(&walker);
/*
* mmio: emulate if accessible, otherwise its a guest fault.
*/
if (is_io_pte(*shadow_pte)) {
- if (may_access(*shadow_pte, write_fault, user_fault))
- return 1;
- pgprintk("%s: io work, no access\n", __FUNCTION__);
- inject_page_fault(vcpu, addr,
- error_code | PFERR_PRESENT_MASK);
- return 0;
- }
-
- /*
- * pte not present, guest page fault.
- */
- if (pte_present && !fixed) {
- inject_page_fault(vcpu, addr, error_code);
- return 0;
+ return 1;
}
++kvm_stat.pf_fixed;
+ kvm_mmu_audit(vcpu, "post page fault (fixed)");
- return 0;
+ return write_pt;
}
static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
pt_element_t guest_pte;
gpa_t gpa;
- FNAME(init_walker)(&walker, vcpu);
- guest_pte = *FNAME(fetch_guest)(vcpu, &walker, PT_PAGE_TABLE_LEVEL,
- vaddr);
+ FNAME(walk_addr)(&walker, vcpu, vaddr, 0, 0, 0);
+ guest_pte = *walker.ptep;
FNAME(release_walker)(&walker);
if (!is_present_pte(guest_pte))
#undef PT_PTE_COPY_MASK
#undef PT_NON_PTE_COPY_MASK
#undef PT_DIR_BASE_ADDR_MASK
+#undef PT_MAX_FULL_LEVELS
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/highmem.h>
+#include <linux/profile.h>
#include <asm/desc.h>
#include "kvm_svm.h"
asm volatile ("mov %0, %%dr7" :: "r" (val));
}
-static inline int svm_is_long_mode(struct kvm_vcpu *vcpu)
-{
- return vcpu->svm->vmcb->save.efer & KVM_EFER_LMA;
-}
-
static inline void force_new_asid(struct kvm_vcpu *vcpu)
{
vcpu->svm->asid_generation--;
vcpu->rip = vcpu->svm->vmcb->save.rip = vcpu->svm->next_rip;
vcpu->svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
+
+ vcpu->interrupt_window_open = 1;
}
static int has_svm(void)
{
uint32_t eax, ebx, ecx, edx;
- if (current_cpu_data.x86_vendor != X86_VENDOR_AMD) {
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) {
printk(KERN_INFO "has_svm: not amd\n");
return 0;
}
set_msr_interception(msrpm_va, MSR_GS_BASE, 1, 1);
set_msr_interception(msrpm_va, MSR_FS_BASE, 1, 1);
set_msr_interception(msrpm_va, MSR_KERNEL_GS_BASE, 1, 1);
- set_msr_interception(msrpm_va, MSR_STAR, 1, 1);
set_msr_interception(msrpm_va, MSR_LSTAR, 1, 1);
set_msr_interception(msrpm_va, MSR_CSTAR, 1, 1);
set_msr_interception(msrpm_va, MSR_SYSCALL_MASK, 1, 1);
#endif
+ set_msr_interception(msrpm_va, MSR_K6_STAR, 1, 1);
set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_CS, 1, 1);
set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_ESP, 1, 1);
set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_EIP, 1, 1);
/* (1ULL << INTERCEPT_SELECTIVE_CR0) | */
(1ULL << INTERCEPT_CPUID) |
(1ULL << INTERCEPT_HLT) |
- (1ULL << INTERCEPT_INVLPG) |
(1ULL << INTERCEPT_INVLPGA) |
(1ULL << INTERCEPT_IOIO_PROT) |
(1ULL << INTERCEPT_MSR_PROT) |
(1ULL << INTERCEPT_TASK_SWITCH) |
+ (1ULL << INTERCEPT_SHUTDOWN) |
(1ULL << INTERCEPT_VMRUN) |
(1ULL << INTERCEPT_VMMCALL) |
(1ULL << INTERCEPT_VMLOAD) |
memset(vcpu->svm->db_regs, 0, sizeof(vcpu->svm->db_regs));
init_vmcb(vcpu->svm->vmcb);
+ fx_init(vcpu);
+
return 0;
out2:
static void svm_get_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
{
- dt->limit = vcpu->svm->vmcb->save.ldtr.limit;
- dt->base = vcpu->svm->vmcb->save.ldtr.base;
+ dt->limit = vcpu->svm->vmcb->save.idtr.limit;
+ dt->base = vcpu->svm->vmcb->save.idtr.base;
}
static void svm_set_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
{
- vcpu->svm->vmcb->save.ldtr.limit = dt->limit;
- vcpu->svm->vmcb->save.ldtr.base = dt->base ;
+ vcpu->svm->vmcb->save.idtr.limit = dt->limit;
+ vcpu->svm->vmcb->save.idtr.base = dt->base ;
}
static void svm_get_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
vcpu->svm->vmcb->save.gdtr.base = dt->base ;
}
+static void svm_decache_cr0_cr4_guest_bits(struct kvm_vcpu *vcpu)
+{
+}
+
static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
#ifdef CONFIG_X86_64
u64 fault_address;
u32 error_code;
enum emulation_result er;
+ int r;
if (is_external_interrupt(exit_int_info))
push_irq(vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
fault_address = vcpu->svm->vmcb->control.exit_info_2;
error_code = vcpu->svm->vmcb->control.exit_info_1;
- if (!vcpu->mmu.page_fault(vcpu, fault_address, error_code)) {
+ r = kvm_mmu_page_fault(vcpu, fault_address, error_code);
+ if (r < 0) {
+ spin_unlock(&vcpu->kvm->lock);
+ return r;
+ }
+ if (!r) {
spin_unlock(&vcpu->kvm->lock);
return 1;
}
return 0;
}
+static int shutdown_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ /*
+ * VMCB is undefined after a SHUTDOWN intercept
+ * so reinitialize it.
+ */
+ memset(vcpu->svm->vmcb, 0, PAGE_SIZE);
+ init_vmcb(vcpu->svm->vmcb);
+
+ kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
+ return 0;
+}
+
static int io_get_override(struct kvm_vcpu *vcpu,
struct vmcb_seg **seg,
int *addr_override)
{
vcpu->svm->next_rip = vcpu->svm->vmcb->save.rip + 1;
skip_emulated_instruction(vcpu);
- if (vcpu->irq_summary && (vcpu->svm->vmcb->save.rflags & X86_EFLAGS_IF))
+ if (vcpu->irq_summary)
return 1;
kvm_run->exit_reason = KVM_EXIT_HLT;
+ ++kvm_stat.halt_exits;
return 0;
}
static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
{
switch (ecx) {
- case MSR_IA32_MC0_CTL:
- case MSR_IA32_MCG_STATUS:
- case MSR_IA32_MCG_CAP:
- case MSR_IA32_MC0_MISC:
- case MSR_IA32_MC0_MISC+4:
- case MSR_IA32_MC0_MISC+8:
- case MSR_IA32_MC0_MISC+12:
- case MSR_IA32_MC0_MISC+16:
- case MSR_IA32_UCODE_REV:
- /* MTRR registers */
- case 0xfe:
- case 0x200 ... 0x2ff:
- *data = 0;
- break;
case MSR_IA32_TIME_STAMP_COUNTER: {
u64 tsc;
*data = vcpu->svm->vmcb->control.tsc_offset + tsc;
break;
}
- case MSR_EFER:
- *data = vcpu->shadow_efer;
- break;
- case MSR_IA32_APICBASE:
- *data = vcpu->apic_base;
- break;
-#ifdef CONFIG_X86_64
- case MSR_STAR:
+ case MSR_K6_STAR:
*data = vcpu->svm->vmcb->save.star;
break;
+#ifdef CONFIG_X86_64
case MSR_LSTAR:
*data = vcpu->svm->vmcb->save.lstar;
break;
*data = vcpu->svm->vmcb->save.sysenter_esp;
break;
default:
- printk(KERN_ERR "kvm: unhandled rdmsr: 0x%x\n", ecx);
- return 1;
+ return kvm_get_msr_common(vcpu, ecx, data);
}
return 0;
}
static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
{
switch (ecx) {
-#ifdef CONFIG_X86_64
- case MSR_EFER:
- set_efer(vcpu, data);
- break;
-#endif
- case MSR_IA32_MC0_STATUS:
- printk(KERN_WARNING "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n"
- , __FUNCTION__, data);
- break;
case MSR_IA32_TIME_STAMP_COUNTER: {
u64 tsc;
vcpu->svm->vmcb->control.tsc_offset = data - tsc;
break;
}
- case MSR_IA32_UCODE_REV:
- case MSR_IA32_UCODE_WRITE:
- case 0x200 ... 0x2ff: /* MTRRs */
- break;
- case MSR_IA32_APICBASE:
- vcpu->apic_base = data;
- break;
-#ifdef CONFIG_X86_64_
- case MSR_STAR:
+ case MSR_K6_STAR:
vcpu->svm->vmcb->save.star = data;
break;
+#ifdef CONFIG_X86_64
case MSR_LSTAR:
vcpu->svm->vmcb->save.lstar = data;
break;
vcpu->svm->vmcb->save.sysenter_esp = data;
break;
default:
- printk(KERN_ERR "kvm: unhandled wrmsr: %x\n", ecx);
- return 1;
+ return kvm_set_msr_common(vcpu, ecx, data);
}
return 0;
}
return rdmsr_interception(vcpu, kvm_run);
}
+static int interrupt_window_interception(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ /*
+ * If the user space waits to inject interrupts, exit as soon as
+ * possible
+ */
+ if (kvm_run->request_interrupt_window &&
+ !vcpu->irq_summary) {
+ ++kvm_stat.irq_window_exits;
+ kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
+ return 0;
+ }
+
+ return 1;
+}
+
static int (*svm_exit_handlers[])(struct kvm_vcpu *vcpu,
struct kvm_run *kvm_run) = {
[SVM_EXIT_READ_CR0] = emulate_on_interception,
[SVM_EXIT_NMI] = nop_on_interception,
[SVM_EXIT_SMI] = nop_on_interception,
[SVM_EXIT_INIT] = nop_on_interception,
+ [SVM_EXIT_VINTR] = interrupt_window_interception,
/* [SVM_EXIT_CR0_SEL_WRITE] = emulate_on_interception, */
[SVM_EXIT_CPUID] = cpuid_interception,
[SVM_EXIT_HLT] = halt_interception,
[SVM_EXIT_IOIO] = io_interception,
[SVM_EXIT_MSR] = msr_interception,
[SVM_EXIT_TASK_SWITCH] = task_switch_interception,
+ [SVM_EXIT_SHUTDOWN] = shutdown_interception,
[SVM_EXIT_VMRUN] = invalid_op_interception,
[SVM_EXIT_VMMCALL] = invalid_op_interception,
[SVM_EXIT_VMLOAD] = invalid_op_interception,
}
-static inline void kvm_try_inject_irq(struct kvm_vcpu *vcpu)
+static inline void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
{
struct vmcb_control_area *control;
- if (!vcpu->irq_summary)
- return;
-
control = &vcpu->svm->vmcb->control;
-
control->int_vector = pop_irq(vcpu);
control->int_ctl &= ~V_INTR_PRIO_MASK;
control->int_ctl |= V_IRQ_MASK |
control->int_ctl &= ~V_IRQ_MASK;
push_irq(vcpu, control->int_vector);
}
+
+ vcpu->interrupt_window_open =
+ !(control->int_state & SVM_INTERRUPT_SHADOW_MASK);
+}
+
+static void do_interrupt_requests(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ struct vmcb_control_area *control = &vcpu->svm->vmcb->control;
+
+ vcpu->interrupt_window_open =
+ (!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
+ (vcpu->svm->vmcb->save.rflags & X86_EFLAGS_IF));
+
+ if (vcpu->interrupt_window_open && vcpu->irq_summary)
+ /*
+ * If interrupts enabled, and not blocked by sti or mov ss. Good.
+ */
+ kvm_do_inject_irq(vcpu);
+
+ /*
+ * Interrupts blocked. Wait for unblock.
+ */
+ if (!vcpu->interrupt_window_open &&
+ (vcpu->irq_summary || kvm_run->request_interrupt_window)) {
+ control->intercept |= 1ULL << INTERCEPT_VINTR;
+ } else
+ control->intercept &= ~(1ULL << INTERCEPT_VINTR);
+}
+
+static void post_kvm_run_save(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ kvm_run->ready_for_interrupt_injection = (vcpu->interrupt_window_open &&
+ vcpu->irq_summary == 0);
+ kvm_run->if_flag = (vcpu->svm->vmcb->save.rflags & X86_EFLAGS_IF) != 0;
+ kvm_run->cr8 = vcpu->cr8;
+ kvm_run->apic_base = vcpu->apic_base;
+}
+
+/*
+ * Check if userspace requested an interrupt window, and that the
+ * interrupt window is open.
+ *
+ * No need to exit to userspace if we already have an interrupt queued.
+ */
+static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ return (!vcpu->irq_summary &&
+ kvm_run->request_interrupt_window &&
+ vcpu->interrupt_window_open &&
+ (vcpu->svm->vmcb->save.rflags & X86_EFLAGS_IF));
}
static void save_db_regs(unsigned long *db_regs)
u16 fs_selector;
u16 gs_selector;
u16 ldt_selector;
+ int r;
again:
- kvm_try_inject_irq(vcpu);
+ if (!vcpu->mmio_read_completed)
+ do_interrupt_requests(vcpu, kvm_run);
clgi();
save_db_regs(vcpu->svm->host_db_regs);
load_db_regs(vcpu->svm->db_regs);
}
+
+ fx_save(vcpu->host_fx_image);
+ fx_restore(vcpu->guest_fx_image);
+
asm volatile (
#ifdef CONFIG_X86_64
"push %%rbx; push %%rcx; push %%rdx;"
#endif
: "cc", "memory" );
+ fx_save(vcpu->guest_fx_image);
+ fx_restore(vcpu->host_fx_image);
+
if ((vcpu->svm->vmcb->save.dr7 & 0xff))
load_db_regs(vcpu->svm->host_db_regs);
reload_tss(vcpu);
+ /*
+ * Profile KVM exit RIPs:
+ */
+ if (unlikely(prof_on == KVM_PROFILING))
+ profile_hit(KVM_PROFILING,
+ (void *)(unsigned long)vcpu->svm->vmcb->save.rip);
+
stgi();
kvm_reput_irq(vcpu);
if (vcpu->svm->vmcb->control.exit_code == SVM_EXIT_ERR) {
kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY;
kvm_run->exit_reason = vcpu->svm->vmcb->control.exit_code;
+ post_kvm_run_save(vcpu, kvm_run);
return 0;
}
- if (handle_exit(vcpu, kvm_run)) {
+ r = handle_exit(vcpu, kvm_run);
+ if (r > 0) {
if (signal_pending(current)) {
++kvm_stat.signal_exits;
+ post_kvm_run_save(vcpu, kvm_run);
+ return -EINTR;
+ }
+
+ if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+ ++kvm_stat.request_irq_exits;
+ post_kvm_run_save(vcpu, kvm_run);
return -EINTR;
}
kvm_resched(vcpu);
goto again;
}
- return 0;
+ post_kvm_run_save(vcpu, kvm_run);
+ return r;
}
static void svm_flush_tlb(struct kvm_vcpu *vcpu)
.get_segment_base = svm_get_segment_base,
.get_segment = svm_get_segment,
.set_segment = svm_set_segment,
- .is_long_mode = svm_is_long_mode,
.get_cs_db_l_bits = svm_get_cs_db_l_bits,
+ .decache_cr0_cr4_guest_bits = svm_decache_cr0_cr4_guest_bits,
.set_cr0 = svm_set_cr0,
.set_cr0_no_modeswitch = svm_set_cr0,
.set_cr3 = svm_set_cr3,
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/highmem.h>
+#include <linux/profile.h>
#include <asm/io.h>
#include <asm/desc.h>
#include "segment_descriptor.h"
-#define MSR_IA32_FEATURE_CONTROL 0x03a
MODULE_AUTHOR("Qumranet");
MODULE_LICENSE("GPL");
static void __vcpu_clear(void *arg)
{
struct kvm_vcpu *vcpu = arg;
- int cpu = smp_processor_id();
+ int cpu = raw_smp_processor_id();
if (vcpu->cpu == cpu)
vmcs_clear(vcpu->vmcs);
#endif
}
+static noinline void vmwrite_error(unsigned long field, unsigned long value)
+{
+ printk(KERN_ERR "vmwrite error: reg %lx value %lx (err %d)\n",
+ field, value, vmcs_read32(VM_INSTRUCTION_ERROR));
+ dump_stack();
+}
+
static void vmcs_writel(unsigned long field, unsigned long value)
{
u8 error;
asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
: "=q"(error) : "a"(value), "d"(field) : "cc" );
- if (error)
- printk(KERN_ERR "vmwrite error: reg %lx value %lx (err %d)\n",
- field, value, vmcs_read32(VM_INSTRUCTION_ERROR));
+ if (unlikely(error))
+ vmwrite_error(field, value);
}
static void vmcs_write16(unsigned long field, u16 value)
if (interruptibility & 3)
vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
interruptibility & ~3);
+ vcpu->interrupt_window_open = 1;
}
static void vmx_inject_gp(struct kvm_vcpu *vcpu, unsigned error_code)
data = vmcs_readl(GUEST_GS_BASE);
break;
case MSR_EFER:
- data = vcpu->shadow_efer;
- break;
+ return kvm_get_msr_common(vcpu, msr_index, pdata);
#endif
case MSR_IA32_TIME_STAMP_COUNTER:
data = guest_read_tsc();
case MSR_IA32_SYSENTER_ESP:
data = vmcs_read32(GUEST_SYSENTER_ESP);
break;
- case MSR_IA32_MC0_CTL:
- case MSR_IA32_MCG_STATUS:
- case MSR_IA32_MCG_CAP:
- case MSR_IA32_MC0_MISC:
- case MSR_IA32_MC0_MISC+4:
- case MSR_IA32_MC0_MISC+8:
- case MSR_IA32_MC0_MISC+12:
- case MSR_IA32_MC0_MISC+16:
- case MSR_IA32_UCODE_REV:
- /* MTRR registers */
- case 0xfe:
- case 0x200 ... 0x2ff:
- data = 0;
- break;
- case MSR_IA32_APICBASE:
- data = vcpu->apic_base;
- break;
default:
msr = find_msr_entry(vcpu, msr_index);
- if (!msr) {
- printk(KERN_ERR "kvm: unhandled rdmsr: %x\n", msr_index);
- return 1;
+ if (msr) {
+ data = msr->data;
+ break;
}
- data = msr->data;
- break;
+ return kvm_get_msr_common(vcpu, msr_index, pdata);
}
*pdata = data;
struct vmx_msr_entry *msr;
switch (msr_index) {
#ifdef CONFIG_X86_64
+ case MSR_EFER:
+ return kvm_set_msr_common(vcpu, msr_index, data);
case MSR_FS_BASE:
vmcs_writel(GUEST_FS_BASE, data);
break;
case MSR_IA32_SYSENTER_ESP:
vmcs_write32(GUEST_SYSENTER_ESP, data);
break;
-#ifdef __x86_64
- case MSR_EFER:
- set_efer(vcpu, data);
- break;
- case MSR_IA32_MC0_STATUS:
- printk(KERN_WARNING "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n"
- , __FUNCTION__, data);
- break;
-#endif
case MSR_IA32_TIME_STAMP_COUNTER: {
guest_write_tsc(data);
break;
}
- case MSR_IA32_UCODE_REV:
- case MSR_IA32_UCODE_WRITE:
- case 0x200 ... 0x2ff: /* MTRRs */
- break;
- case MSR_IA32_APICBASE:
- vcpu->apic_base = data;
- break;
default:
msr = find_msr_entry(vcpu, msr_index);
- if (!msr) {
- printk(KERN_ERR "kvm: unhandled wrmsr: 0x%x\n", msr_index);
- return 1;
+ if (msr) {
+ msr->data = data;
+ break;
}
+ return kvm_set_msr_common(vcpu, msr_index, data);
msr->data = data;
break;
}
{
u32 vmx_msr_low, vmx_msr_high;
- rdmsr(MSR_IA32_VMX_BASIC_MSR, vmx_msr_low, vmx_msr_high);
+ rdmsr(MSR_IA32_VMX_BASIC, vmx_msr_low, vmx_msr_high);
vmcs_descriptor.size = vmx_msr_high & 0x1fff;
vmcs_descriptor.order = get_order(vmcs_descriptor.size);
vmcs_descriptor.revision_id = vmx_msr_low;
-};
+}
static struct vmcs *alloc_vmcs_cpu(int cpu)
{
static struct vmcs *alloc_vmcs(void)
{
- return alloc_vmcs_cpu(smp_processor_id());
+ return alloc_vmcs_cpu(raw_smp_processor_id());
}
static void free_vmcs(struct vmcs *vmcs)
vmcs_write32(GUEST_SS_AR_BYTES, 0xf3);
vmcs_write32(GUEST_CS_AR_BYTES, 0xf3);
+ vmcs_write32(GUEST_CS_LIMIT, 0xffff);
vmcs_write16(GUEST_CS_SELECTOR, vmcs_readl(GUEST_CS_BASE) >> 4);
fix_rmode_seg(VCPU_SREG_ES, &vcpu->rmode.es);
#endif
+static void vmx_decache_cr0_cr4_guest_bits(struct kvm_vcpu *vcpu)
+{
+ vcpu->cr0 &= KVM_GUEST_CR0_MASK;
+ vcpu->cr0 |= vmcs_readl(GUEST_CR0) & ~KVM_GUEST_CR0_MASK;
+
+ vcpu->cr4 &= KVM_GUEST_CR4_MASK;
+ vcpu->cr4 |= vmcs_readl(GUEST_CR4) & ~KVM_GUEST_CR4_MASK;
+}
+
static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
if (vcpu->rmode.active && (cr0 & CR0_PE_MASK))
vmcs_write32(sf->ar_bytes, ar);
}
-static int vmx_is_long_mode(struct kvm_vcpu *vcpu)
-{
- return vmcs_read32(VM_ENTRY_CONTROLS) & VM_ENTRY_CONTROLS_IA32E_MASK;
-}
-
static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
{
u32 ar = vmcs_read32(GUEST_CS_AR_BYTES);
vmcs_writel(GUEST_RIP, 0xfff0);
vmcs_writel(GUEST_RSP, 0);
- vmcs_writel(GUEST_CR3, 0);
-
//todo: dr0 = dr1 = dr2 = dr3 = 0; dr6 = 0xffff0ff0
vmcs_writel(GUEST_DR7, 0x400);
vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
/* Control */
- vmcs_write32_fixedbits(MSR_IA32_VMX_PINBASED_CTLS_MSR,
+ vmcs_write32_fixedbits(MSR_IA32_VMX_PINBASED_CTLS,
PIN_BASED_VM_EXEC_CONTROL,
PIN_BASED_EXT_INTR_MASK /* 20.6.1 */
| PIN_BASED_NMI_EXITING /* 20.6.1 */
);
- vmcs_write32_fixedbits(MSR_IA32_VMX_PROCBASED_CTLS_MSR,
+ vmcs_write32_fixedbits(MSR_IA32_VMX_PROCBASED_CTLS,
CPU_BASED_VM_EXEC_CONTROL,
CPU_BASED_HLT_EXITING /* 20.6.2 */
| CPU_BASED_CR8_LOAD_EXITING /* 20.6.2 */
| CPU_BASED_CR8_STORE_EXITING /* 20.6.2 */
| CPU_BASED_UNCOND_IO_EXITING /* 20.6.2 */
- | CPU_BASED_INVDPG_EXITING
| CPU_BASED_MOV_DR_EXITING
| CPU_BASED_USE_TSC_OFFSETING /* 21.3 */
);
rdmsrl(MSR_IA32_SYSENTER_EIP, a);
vmcs_writel(HOST_IA32_SYSENTER_EIP, a); /* 22.2.3 */
- ret = -ENOMEM;
- vcpu->guest_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!vcpu->guest_msrs)
- goto out;
- vcpu->host_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!vcpu->host_msrs)
- goto out_free_guest_msrs;
-
for (i = 0; i < NR_VMX_MSR; ++i) {
u32 index = vmx_msr_index[i];
u32 data_low, data_high;
virt_to_phys(vcpu->guest_msrs + NR_BAD_MSRS));
vmcs_writel(VM_EXIT_MSR_LOAD_ADDR,
virt_to_phys(vcpu->host_msrs + NR_BAD_MSRS));
- vmcs_write32_fixedbits(MSR_IA32_VMX_EXIT_CTLS_MSR, VM_EXIT_CONTROLS,
+ vmcs_write32_fixedbits(MSR_IA32_VMX_EXIT_CTLS, VM_EXIT_CONTROLS,
(HOST_IS_64 << 9)); /* 22.2,1, 20.7.1 */
vmcs_write32(VM_EXIT_MSR_STORE_COUNT, nr_good_msrs); /* 22.2.2 */
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, nr_good_msrs); /* 22.2.2 */
/* 22.2.1, 20.8.1 */
- vmcs_write32_fixedbits(MSR_IA32_VMX_ENTRY_CTLS_MSR,
+ vmcs_write32_fixedbits(MSR_IA32_VMX_ENTRY_CTLS,
VM_ENTRY_CONTROLS, 0);
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); /* 22.2.1 */
return 0;
-out_free_guest_msrs:
- kfree(vcpu->guest_msrs);
out:
return ret;
}
irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
}
-static void kvm_try_inject_irq(struct kvm_vcpu *vcpu)
+
+static void do_interrupt_requests(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
{
- if ((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF)
- && (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0)
+ u32 cpu_based_vm_exec_control;
+
+ vcpu->interrupt_window_open =
+ ((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
+ (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
+
+ if (vcpu->interrupt_window_open &&
+ vcpu->irq_summary &&
+ !(vmcs_read32(VM_ENTRY_INTR_INFO_FIELD) & INTR_INFO_VALID_MASK))
/*
- * Interrupts enabled, and not blocked by sti or mov ss. Good.
+ * If interrupts enabled, and not blocked by sti or mov ss. Good.
*/
kvm_do_inject_irq(vcpu);
- else
+
+ cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+ if (!vcpu->interrupt_window_open &&
+ (vcpu->irq_summary || kvm_run->request_interrupt_window))
/*
* Interrupts blocked. Wait for unblock.
*/
- vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
- vmcs_read32(CPU_BASED_VM_EXEC_CONTROL)
- | CPU_BASED_VIRTUAL_INTR_PENDING);
+ cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_INTR_PENDING;
+ else
+ cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
+ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
}
static void kvm_guest_debug_pre(struct kvm_vcpu *vcpu)
unsigned long cr2, rip;
u32 vect_info;
enum emulation_result er;
+ int r;
vect_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
cr2 = vmcs_readl(EXIT_QUALIFICATION);
spin_lock(&vcpu->kvm->lock);
- if (!vcpu->mmu.page_fault(vcpu, cr2, error_code)) {
+ r = kvm_mmu_page_fault(vcpu, cr2, error_code);
+ if (r < 0) {
+ spin_unlock(&vcpu->kvm->lock);
+ return r;
+ }
+ if (!r) {
spin_unlock(&vcpu->kvm->lock);
return 1;
}
return 0;
}
-static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
-{
- u64 address = vmcs_read64(EXIT_QUALIFICATION);
- int instruction_length = vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
- spin_lock(&vcpu->kvm->lock);
- vcpu->mmu.inval_page(vcpu, address);
- spin_unlock(&vcpu->kvm->lock);
- vmcs_writel(GUEST_RIP, vmcs_readl(GUEST_RIP) + instruction_length);
- return 1;
-}
-
static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
u64 exit_qualification;
return 1;
}
+static void post_kvm_run_save(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ kvm_run->if_flag = (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) != 0;
+ kvm_run->cr8 = vcpu->cr8;
+ kvm_run->apic_base = vcpu->apic_base;
+ kvm_run->ready_for_interrupt_injection = (vcpu->interrupt_window_open &&
+ vcpu->irq_summary == 0);
+}
+
static int handle_interrupt_window(struct kvm_vcpu *vcpu,
struct kvm_run *kvm_run)
{
- /* Turn off interrupt window reporting. */
- vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
- vmcs_read32(CPU_BASED_VM_EXEC_CONTROL)
- & ~CPU_BASED_VIRTUAL_INTR_PENDING);
+ /*
+ * If the user space waits to inject interrupts, exit as soon as
+ * possible
+ */
+ if (kvm_run->request_interrupt_window &&
+ !vcpu->irq_summary) {
+ kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
+ ++kvm_stat.irq_window_exits;
+ return 0;
+ }
return 1;
}
static int handle_halt(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
skip_emulated_instruction(vcpu);
- if (vcpu->irq_summary && (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF))
+ if (vcpu->irq_summary)
return 1;
kvm_run->exit_reason = KVM_EXIT_HLT;
+ ++kvm_stat.halt_exits;
return 0;
}
[EXIT_REASON_EXCEPTION_NMI] = handle_exception,
[EXIT_REASON_EXTERNAL_INTERRUPT] = handle_external_interrupt,
[EXIT_REASON_IO_INSTRUCTION] = handle_io,
- [EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_CR_ACCESS] = handle_cr,
[EXIT_REASON_DR_ACCESS] = handle_dr,
[EXIT_REASON_CPUID] = handle_cpuid,
return 0;
}
+/*
+ * Check if userspace requested an interrupt window, and that the
+ * interrupt window is open.
+ *
+ * No need to exit to userspace if we already have an interrupt queued.
+ */
+static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ return (!vcpu->irq_summary &&
+ kvm_run->request_interrupt_window &&
+ vcpu->interrupt_window_open &&
+ (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF));
+}
+
static int vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
u8 fail;
u16 fs_sel, gs_sel, ldt_sel;
int fs_gs_ldt_reload_needed;
+ int r;
again:
/*
vmcs_writel(HOST_GS_BASE, segment_base(gs_sel));
#endif
- if (vcpu->irq_summary &&
- !(vmcs_read32(VM_ENTRY_INTR_INFO_FIELD) & INTR_INFO_VALID_MASK))
- kvm_try_inject_irq(vcpu);
+ if (!vcpu->mmio_read_completed)
+ do_interrupt_requests(vcpu, kvm_run);
if (vcpu->guest_debug.enabled)
kvm_guest_debug_pre(vcpu);
#endif
"setbe %0 \n\t"
"popf \n\t"
- : "=g" (fail)
+ : "=q" (fail)
: "r"(vcpu->launched), "d"((unsigned long)HOST_RSP),
"c"(vcpu),
[rax]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RAX])),
fx_save(vcpu->guest_fx_image);
fx_restore(vcpu->host_fx_image);
+ vcpu->interrupt_window_open = (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0;
#ifndef CONFIG_X86_64
asm ("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
#endif
+ /*
+ * Profile KVM exit RIPs:
+ */
+ if (unlikely(prof_on == KVM_PROFILING))
+ profile_hit(KVM_PROFILING, (void *)vmcs_readl(GUEST_RIP));
+
kvm_run->exit_type = 0;
if (fail) {
kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY;
kvm_run->exit_reason = vmcs_read32(VM_INSTRUCTION_ERROR);
+ r = 0;
} else {
if (fs_gs_ldt_reload_needed) {
load_ldt(ldt_sel);
}
vcpu->launched = 1;
kvm_run->exit_type = KVM_EXIT_TYPE_VM_EXIT;
- if (kvm_handle_exit(kvm_run, vcpu)) {
+ r = kvm_handle_exit(kvm_run, vcpu);
+ if (r > 0) {
/* Give scheduler a change to reschedule. */
if (signal_pending(current)) {
++kvm_stat.signal_exits;
+ post_kvm_run_save(vcpu, kvm_run);
+ return -EINTR;
+ }
+
+ if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+ ++kvm_stat.request_irq_exits;
+ post_kvm_run_save(vcpu, kvm_run);
return -EINTR;
}
+
kvm_resched(vcpu);
goto again;
}
}
- return 0;
+
+ post_kvm_run_save(vcpu, kvm_run);
+ return r;
}
static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
{
struct vmcs *vmcs;
+ vcpu->guest_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!vcpu->guest_msrs)
+ return -ENOMEM;
+
+ vcpu->host_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!vcpu->host_msrs)
+ goto out_free_guest_msrs;
+
vmcs = alloc_vmcs();
if (!vmcs)
- return -ENOMEM;
+ goto out_free_msrs;
+
vmcs_clear(vmcs);
vcpu->vmcs = vmcs;
vcpu->launched = 0;
+
return 0;
+
+out_free_msrs:
+ kfree(vcpu->host_msrs);
+ vcpu->host_msrs = NULL;
+
+out_free_guest_msrs:
+ kfree(vcpu->guest_msrs);
+ vcpu->guest_msrs = NULL;
+
+ return -ENOMEM;
}
static struct kvm_arch_ops vmx_arch_ops = {
.get_segment_base = vmx_get_segment_base,
.get_segment = vmx_get_segment,
.set_segment = vmx_set_segment,
- .is_long_mode = vmx_is_long_mode,
.get_cs_db_l_bits = vmx_get_cs_db_l_bits,
+ .decache_cr0_cr4_guest_bits = vmx_decache_cr0_cr4_guest_bits,
.set_cr0 = vmx_set_cr0,
.set_cr0_no_modeswitch = vmx_set_cr0_no_modeswitch,
.set_cr3 = vmx_set_cr3,
#define CR4_VMXE 0x2000
-#define MSR_IA32_VMX_BASIC_MSR 0x480
+#define MSR_IA32_VMX_BASIC 0x480
#define MSR_IA32_FEATURE_CONTROL 0x03a
-#define MSR_IA32_VMX_PINBASED_CTLS_MSR 0x481
-#define MSR_IA32_VMX_PROCBASED_CTLS_MSR 0x482
-#define MSR_IA32_VMX_EXIT_CTLS_MSR 0x483
-#define MSR_IA32_VMX_ENTRY_CTLS_MSR 0x484
+#define MSR_IA32_VMX_PINBASED_CTLS 0x481
+#define MSR_IA32_VMX_PROCBASED_CTLS 0x482
+#define MSR_IA32_VMX_EXIT_CTLS 0x483
+#define MSR_IA32_VMX_ENTRY_CTLS 0x484
#endif
#define ModRM (1<<6)
/* Destination is only written; never read. */
#define Mov (1<<7)
+#define BitOp (1<<8)
static u8 opcode_table[256] = {
/* 0x00 - 0x07 */
0, 0, ByteOp | DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM
};
-static u8 twobyte_table[256] = {
+static u16 twobyte_table[256] = {
/* 0x00 - 0x0F */
0, SrcMem | ModRM | DstReg, 0, 0, 0, 0, ImplicitOps, 0,
0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
/* 0x90 - 0x9F */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* 0xA0 - 0xA7 */
- 0, 0, 0, DstMem | SrcReg | ModRM, 0, 0, 0, 0,
+ 0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
/* 0xA8 - 0xAF */
- 0, 0, 0, DstMem | SrcReg | ModRM, 0, 0, 0, 0,
+ 0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
/* 0xB0 - 0xB7 */
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
- DstMem | SrcReg | ModRM,
+ DstMem | SrcReg | ModRM | BitOp,
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
DstReg | SrcMem16 | ModRM | Mov,
/* 0xB8 - 0xBF */
- 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM,
+ 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
DstReg | SrcMem16 | ModRM | Mov,
/* 0xC0 - 0xCF */
int
x86_emulate_memop(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
{
- u8 b, d, sib, twobyte = 0, rex_prefix = 0;
+ unsigned d;
+ u8 b, sib, twobyte = 0, rex_prefix = 0;
u8 modrm, modrm_mod = 0, modrm_reg = 0, modrm_rm = 0;
unsigned long *override_base = NULL;
unsigned int op_bytes, ad_bytes, lock_prefix = 0, rep_prefix = 0, i;
;
}
- /* Decode and fetch the destination operand: register or memory. */
- switch (d & DstMask) {
- case ImplicitOps:
- /* Special instructions do their own operand decoding. */
- goto special_insn;
- case DstReg:
- dst.type = OP_REG;
- if ((d & ByteOp)
- && !(twobyte_table && (b == 0xb6 || b == 0xb7))) {
- dst.ptr = decode_register(modrm_reg, _regs,
- (rex_prefix == 0));
- dst.val = *(u8 *) dst.ptr;
- dst.bytes = 1;
- } else {
- dst.ptr = decode_register(modrm_reg, _regs, 0);
- switch ((dst.bytes = op_bytes)) {
- case 2:
- dst.val = *(u16 *)dst.ptr;
- break;
- case 4:
- dst.val = *(u32 *)dst.ptr;
- break;
- case 8:
- dst.val = *(u64 *)dst.ptr;
- break;
- }
- }
- break;
- case DstMem:
- dst.type = OP_MEM;
- dst.ptr = (unsigned long *)cr2;
- dst.bytes = (d & ByteOp) ? 1 : op_bytes;
- if (!(d & Mov) && /* optimisation - avoid slow emulated read */
- ((rc = ops->read_emulated((unsigned long)dst.ptr,
- &dst.val, dst.bytes, ctxt)) != 0))
- goto done;
- break;
- }
- dst.orig_val = dst.val;
-
/*
* Decode and fetch the source operand: register, memory
* or immediate.
break;
}
+ /* Decode and fetch the destination operand: register or memory. */
+ switch (d & DstMask) {
+ case ImplicitOps:
+ /* Special instructions do their own operand decoding. */
+ goto special_insn;
+ case DstReg:
+ dst.type = OP_REG;
+ if ((d & ByteOp)
+ && !(twobyte_table && (b == 0xb6 || b == 0xb7))) {
+ dst.ptr = decode_register(modrm_reg, _regs,
+ (rex_prefix == 0));
+ dst.val = *(u8 *) dst.ptr;
+ dst.bytes = 1;
+ } else {
+ dst.ptr = decode_register(modrm_reg, _regs, 0);
+ switch ((dst.bytes = op_bytes)) {
+ case 2:
+ dst.val = *(u16 *)dst.ptr;
+ break;
+ case 4:
+ dst.val = *(u32 *)dst.ptr;
+ break;
+ case 8:
+ dst.val = *(u64 *)dst.ptr;
+ break;
+ }
+ }
+ break;
+ case DstMem:
+ dst.type = OP_MEM;
+ dst.ptr = (unsigned long *)cr2;
+ dst.bytes = (d & ByteOp) ? 1 : op_bytes;
+ if (d & BitOp) {
+ dst.ptr += src.val / BITS_PER_LONG;
+ dst.bytes = sizeof(long);
+ }
+ if (!(d & Mov) && /* optimisation - avoid slow emulated read */
+ ((rc = ops->read_emulated((unsigned long)dst.ptr,
+ &dst.val, dst.bytes, ctxt)) != 0))
+ goto done;
+ break;
+ }
+ dst.orig_val = dst.val;
+
if (twobyte)
goto twobyte_insn;
ctxt)) != 0))
goto done;
if ((old_lo != _regs[VCPU_REGS_RAX])
- || (old_hi != _regs[VCPU_REGS_RDI])) {
+ || (old_hi != _regs[VCPU_REGS_RDX])) {
_regs[VCPU_REGS_RAX] = old_lo;
_regs[VCPU_REGS_RDX] = old_hi;
_eflags &= ~EFLG_ZF;
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/leds-gpio.h>
snprintf(name, sizeof(name), "pmubl");
- bd = backlight_device_register(name, NULL, &pmu_backlight_data);
+ bd = backlight_device_register(name, NULL, NULL, &pmu_backlight_data);
if (IS_ERR(bd)) {
printk("pmubl: Backlight registration failed\n");
goto error;
#include <linux/sysdev.h>
#include <linux/freezer.h>
#include <linux/syscalls.h>
+#include <linux/suspend.h>
#include <linux/cpu.h>
#include <asm/prom.h>
#include <asm/machdep.h>
int err = -EINVAL;
/* page 0 is the superblock, read it... */
- if (bitmap->file)
- bitmap->sb_page = read_page(bitmap->file, 0, bitmap, PAGE_SIZE);
- else {
+ if (bitmap->file) {
+ loff_t isize = i_size_read(bitmap->file->f_mapping->host);
+ int bytes = isize > PAGE_SIZE ? PAGE_SIZE : isize;
+
+ bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
+ } else {
bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
}
if (IS_ERR(bitmap->sb_page)) {
int count;
/* unmap the old page, we're done with it */
if (index == num_pages-1)
- count = bytes - index * PAGE_SIZE;
+ count = bytes + sizeof(bitmap_super_t)
+ - index * PAGE_SIZE;
else
count = PAGE_SIZE;
if (index == 0) {
if (size != get_capacity(md->disk))
memset(&md->geometry, 0, sizeof(md->geometry));
- __set_size(md, size);
+ if (md->suspended_bdev)
+ __set_size(md, size);
if (size == 0)
return 0;
if (!dm_suspended(md))
goto out;
+ /* without bdev, the device size cannot be changed */
+ if (!md->suspended_bdev)
+ if (get_capacity(md->disk) != dm_table_get_size(table))
+ goto out;
+
__unbind(md);
r = __bind(md, table);
/* This does not get reverted if there's an error later. */
dm_table_presuspend_targets(map);
- md->suspended_bdev = bdget_disk(md->disk, 0);
- if (!md->suspended_bdev) {
- DMWARN("bdget failed in dm_suspend");
- r = -ENOMEM;
- goto flush_and_out;
+ /* bdget() can stall if the pending I/Os are not flushed */
+ if (!noflush) {
+ md->suspended_bdev = bdget_disk(md->disk, 0);
+ if (!md->suspended_bdev) {
+ DMWARN("bdget failed in dm_suspend");
+ r = -ENOMEM;
+ goto flush_and_out;
+ }
}
/*
unlock_fs(md);
- bdput(md->suspended_bdev);
- md->suspended_bdev = NULL;
+ if (md->suspended_bdev) {
+ bdput(md->suspended_bdev);
+ md->suspended_bdev = NULL;
+ }
clear_bit(DMF_SUSPENDED, &md->flags);
* and 'events' is odd, we can roll back to the previous clean state */
if (nospares
&& (mddev->in_sync && mddev->recovery_cp == MaxSector)
- && (mddev->events & 1))
+ && (mddev->events & 1)
+ && mddev->events != 1)
mddev->events--;
else {
/* otherwise we have to go forward and ... */
else {
mddev_t *mddev = rdev->mddev;
kick_rdev_from_array(rdev);
- md_update_sb(mddev, 1);
+ if (mddev->pers)
+ md_update_sb(mddev, 1);
md_new_event(mddev);
err = 0;
}
rdev->desc_nr = -1;
rdev->saved_raid_disk = -1;
+ rdev->raid_disk = -1;
rdev->flags = 0;
rdev->data_offset = 0;
rdev->sb_events = 0;
static ssize_t
raid_disks_store(mddev_t *mddev, const char *buf, size_t len)
{
- /* can only set raid_disks if array is not yet active */
char *e;
int rv = 0;
unsigned long n = simple_strtoul(buf, &e, 10);
return -EINVAL;
buf = e+1;
minor = simple_strtoul(buf, &e, 10);
- if (e==buf || *e != '\n')
+ if (e==buf || (*e && *e != '\n') )
return -EINVAL;
if (major >= sizeof(super_types)/sizeof(super_types[0]) ||
super_types[major].name == NULL)
char *ptr, *buf = NULL;
int err = -ENOMEM;
+ md_allow_write(mddev);
+
file = kmalloc(sizeof(*file), GFP_KERNEL);
if (!file)
goto out;
mddev->major_version = info->major_version;
mddev->minor_version = info->minor_version;
mddev->patch_version = info->patch_version;
+ mddev->persistent = !info->not_persistent;
return 0;
}
mddev->major_version = MD_MAJOR_VERSION;
* Commands querying/configuring an existing array:
*/
/* if we are not initialised yet, only ADD_NEW_DISK, STOP_ARRAY,
- * RUN_ARRAY, and SET_BITMAP_FILE are allowed */
+ * RUN_ARRAY, and GET_ and SET_BITMAP_FILE are allowed */
if (!mddev->raid_disks && cmd != ADD_NEW_DISK && cmd != STOP_ARRAY
- && cmd != RUN_ARRAY && cmd != SET_BITMAP_FILE) {
+ && cmd != RUN_ARRAY && cmd != SET_BITMAP_FILE
+ && cmd != GET_BITMAP_FILE) {
err = -ENODEV;
goto abort_unlock;
}
}
}
+/* md_allow_write(mddev)
+ * Calling this ensures that the array is marked 'active' so that writes
+ * may proceed without blocking. It is important to call this before
+ * attempting a GFP_KERNEL allocation while holding the mddev lock.
+ * Must be called with mddev_lock held.
+ */
+void md_allow_write(mddev_t *mddev)
+{
+ if (!mddev->pers)
+ return;
+ if (mddev->ro)
+ return;
+
+ spin_lock_irq(&mddev->write_lock);
+ if (mddev->in_sync) {
+ mddev->in_sync = 0;
+ set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ if (mddev->safemode_delay &&
+ mddev->safemode == 0)
+ mddev->safemode = 1;
+ spin_unlock_irq(&mddev->write_lock);
+ md_update_sb(mddev, 0);
+ } else
+ spin_unlock_irq(&mddev->write_lock);
+}
+EXPORT_SYMBOL_GPL(md_allow_write);
+
static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
#define SYNC_MARKS 10
struct bio_list bl;
struct page **behind_pages = NULL;
const int rw = bio_data_dir(bio);
+ const int do_sync = bio_sync(bio);
int do_barriers;
/*
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ;
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_barriers;
+ mbio->bi_rw = WRITE | do_barriers | do_sync;
mbio->bi_private = r1_bio;
if (behind_pages) {
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (do_sync)
+ md_wakeup_thread(mddev->thread);
#if 0
while ((bio = bio_list_pop(&bl)) != NULL)
generic_make_request(bio);
sbio->bi_sector = r1_bio->sector +
conf->mirrors[i].rdev->data_offset;
sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
+ for (j = 0; j < vcnt ; j++)
+ memcpy(page_address(sbio->bi_io_vec[j].bv_page),
+ page_address(pbio->bi_io_vec[j].bv_page),
+ PAGE_SIZE);
+
}
}
}
* We already have a nr_pending reference on these rdevs.
*/
int i;
+ const int do_sync = bio_sync(r1_bio->master_bio);
clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
clear_bit(R1BIO_Barrier, &r1_bio->state);
for (i=0; i < conf->raid_disks; i++)
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE;
+ bio->bi_rw = WRITE | do_sync;
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
(unsigned long long)r1_bio->sector);
raid_end_bio_io(r1_bio);
} else {
+ const int do_sync = bio_sync(r1_bio->master_bio);
r1_bio->bios[r1_bio->read_disk] =
mddev->ro ? IO_BLOCKED : NULL;
r1_bio->read_disk = disk;
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ;
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
return -EINVAL;
}
+ md_allow_write(mddev);
+
raid_disks = mddev->raid_disks + mddev->delta_disks;
if (raid_disks < conf->raid_disks) {
int i;
int chunk_sects = conf->chunk_mask + 1;
const int rw = bio_data_dir(bio);
+ const int do_sync = bio_sync(bio);
struct bio_list bl;
unsigned long flags;
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ;
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE;
+ mbio->bi_rw = WRITE | do_sync;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (do_sync)
+ md_wakeup_thread(mddev->thread);
+
return 0;
}
(unsigned long long)r10_bio->sector);
raid_end_bio_io(r10_bio);
} else {
+ const int do_sync = bio_sync(r10_bio->master_bio);
rdev = conf->mirrors[mirror].rdev;
if (printk_ratelimit())
printk(KERN_ERR "raid10: %s: redirecting sector %llu to"
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ;
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
if (newsize <= conf->pool_size)
return 0; /* never bother to shrink */
+ md_allow_write(conf->mddev);
+
/* Step 1 */
sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
sizeof(struct stripe_head)+(newsize-1)*sizeof(struct r5dev),
mdk_rdev_t *rdev;
if (!in_chunk_boundary(mddev, raid_bio)) {
- printk("chunk_aligned_read : non aligned\n");
+ PRINTK("chunk_aligned_read : non aligned\n");
return 0;
}
/*
else
break;
}
+ md_allow_write(mddev);
while (new > conf->max_nr_stripes) {
if (grow_one_stripe(conf))
conf->max_nr_stripes++;
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
+#include <linux/jiffies.h>
#include <media/ir-common.h>
/* -------------------------------------------------------------------------- */
{ &utype, sizeof utype },
{ priv->ule_skb->data, priv->ule_skb->len - 4 }
};
- unsigned long ule_crc = ~0L, expected_crc;
+ u32 ule_crc = ~0L, expected_crc;
if (priv->ule_dbit) {
/* Set D-bit for CRC32 verification,
* if it was set originally. */
*((u8 *)priv->ule_skb->tail - 2) << 8 |
*((u8 *)priv->ule_skb->tail - 1);
if (ule_crc != expected_crc) {
- printk(KERN_WARNING "%lu: CRC32 check FAILED: %#lx / %#lx, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n",
+ printk(KERN_WARNING "%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n",
priv->ts_count, ule_crc, expected_crc, priv->ule_sndu_len, priv->ule_sndu_type, ts_remain, ts_remain > 2 ? *(unsigned short *)from_where : 0);
#ifdef ULE_DEBUG
deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
for (i = 0; i < ARRAY_SIZE(haupp_rc_keys); i++) {
- deb_rc("c: %x, d: %x\n",haupp_rc_keys[i].data,haupp_rc_keys[i].custom);
if (haupp_rc_keys[i].data == data &&
haupp_rc_keys[i].custom == custom) {
+
+ deb_rc("c: %x, d: %x\n",haupp_rc_keys[i].data,haupp_rc_keys[i].custom);
+
*event = haupp_rc_keys[i].event;
*state = REMOTE_KEY_PRESSED;
if (st->old_toggle == toggle) {
fchan.vit_alpha = 1; fchan.vit_code_rate_hp = 2; fchan.vit_code_rate_lp = 2;
fchan.vit_hrch = 0; fchan.vit_select_hp = 1;
- dib3000mc_set_channel_cfg(state, &fchan, 7);
+ dib3000mc_set_channel_cfg(state, &fchan, 11);
reg = dib3000mc_read_word(state, 0);
dib3000mc_write_word(state, 0, reg | (1 << 8));
config VIDEO_CAFE_CCIC
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
- depends on I2C && VIDEO_V4L2
+ depends on PCI && I2C && VIDEO_V4L2
select VIDEO_OV7670
---help---
This is a video4linux2 driver for the Marvell 88ALP01 integrated
(unsigned long long)pci_resource_start(dev,0));
schedule();
- btv->bt848_mmio=ioremap(pci_resource_start(dev,0), 0x1000);
- if (NULL == ioremap(pci_resource_start(dev,0), 0x1000)) {
+ btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
+ if (NULL == btv->bt848_mmio) {
printk("bttv%d: ioremap() failed\n", btv->c.nr);
result = -EIO;
goto fail1;
struct cafe_camera *cam = cafe_find_by_pdev(pdev);
if (cam == NULL) {
- cam_warn(cam, "pci_remove on unknown pdev %p\n", pdev);
+ printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
return;
}
mutex_lock(&cam->s_mutex);
cam->sbuf[i].data =
kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
if (!cam->sbuf[i].data) {
+ while (--i >= 0) {
+ kfree(cam->sbuf[i].data);
+ cam->sbuf[i].data = NULL;
+ }
return -ENOMEM;
}
}
if (old == NULL || old->width != new->width || old->height != new->height ||
old->video_encoding != new->video_encoding) {
- int is_scaling;
u16 w = new->width;
u16 h = new->height;
}
err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w);
if (err) return err;
+ }
+ if (new->width != 720 || new->height != (new->is_50hz ? 576 : 480)) {
/* Adjust temporal filter if necessary. The problem with the temporal
filter is that it works well with full resolution capturing, but
not when the capture window is scaled (the filter introduces
- a ghosting effect). So if the capture window changed, and there is
- no updated filter value, then the filter is set depending on whether
- the new window is full resolution or not.
+ a ghosting effect). So if the capture window is scaled, then
+ force the filter to 0.
- For full resolution a setting of 8 really improves the video
+ For full resolution the filter really improves the video
quality, especially if the original video quality is suboptimal. */
- is_scaling = new->width != 720 || new->height != (new->is_50hz ? 576 : 480);
- if (old && old->video_temporal_filter == temporal) {
- temporal = is_scaling ? 0 : 8;
- }
+ temporal = 0;
}
if (old == NULL || old->stream_type != new->stream_type) {
void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix)
{
int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
+ int temporal = p->video_temporal_filter;
/* Stream */
printk(KERN_INFO "%s: Stream: %s\n",
cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE),
cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE),
p->video_spatial_filter);
+ if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480)) {
+ temporal = 0;
+ }
printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
prefix,
cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE),
- p->video_temporal_filter);
+ temporal);
printk(KERN_INFO "%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n",
prefix,
cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE),
uv_lpf=1;
src_decimation=0x21f;
- if (std == V4L2_STD_PAL_M) {
+ if (std == V4L2_STD_PAL_60) {
+ vblank=26;
+ vblank656=26;
+ burst=0x5b;
+ luma_lpf=2;
+ comb=0x20;
+ sc=0x0a8263;
+ } else if (std == V4L2_STD_PAL_M) {
vblank=20;
vblank656=24;
burst=0x61;
/* ----------------------------------------------------------------------- */
/* some leadtek specific stuff */
-static void __devinit leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
+static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
/* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
* any others.
static unsigned int inline norm_swidth(struct cx88_tvnorm *norm)
{
- return (norm->id & V4L2_STD_625_50) ? 922 : 754;
+ return (norm->id & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922;
}
static unsigned int inline norm_hdelay(struct cx88_tvnorm *norm)
{
- return (norm->id & V4L2_STD_625_50) ? 186 : 135;
+ return (norm->id & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 135 : 186;
}
static unsigned int inline norm_vdelay(struct cx88_tvnorm *norm)
static unsigned int inline norm_fsc8(struct cx88_tvnorm *norm)
{
- static const unsigned int ntsc = 28636360;
- static const unsigned int pal = 35468950;
- static const unsigned int palm = 28604892;
-
if (norm->id & V4L2_STD_PAL_M)
- return palm;
+ return 28604892; // 3.575611 MHz
+
+ if (norm->id & (V4L2_STD_PAL_Nc))
+ return 28656448; // 3.582056 MHz
+
+ if (norm->id & V4L2_STD_NTSC) // All NTSC/M and variants
+ return 28636360; // 3.57954545 MHz +/- 10 Hz
- return (norm->id & V4L2_STD_625_50) ? pal : ntsc;
+ /* SECAM have also different sub carrier for chroma,
+ but step_db and step_dr, at cx88_set_tvnorm already handles that.
+
+ The same FSC applies to PAL/BGDKIH, PAL/60, NTSC/4.43 and PAL/N
+ */
+
+ return 35468950; // 4.43361875 MHz +/- 5 Hz
}
static unsigned int inline norm_htotal(struct cx88_tvnorm *norm)
{
- /* Should always be Line Draw Time / (4*FSC) */
- if (norm->id & V4L2_STD_PAL_M)
- return 909;
+ unsigned int fsc4=norm_fsc8(norm)/2;
- return (norm->id & V4L2_STD_625_50) ? 1135 : 910;
+ /* returns 4*FSC / vtotal / frames per seconds */
+ return (norm->id & V4L2_STD_625_50) ?
+ ((fsc4+312)/625+12)/25 :
+ ((fsc4+262)/525*1001+15000)/30000;
}
static unsigned int inline norm_vbipack(struct cx88_tvnorm *norm)
value &= 0x3fe;
cx_write(MO_HDELAY_EVEN, value);
cx_write(MO_HDELAY_ODD, value);
- dprintk(1,"set_scale: hdelay 0x%04x\n", value);
+ dprintk(1,"set_scale: hdelay 0x%04x (width %d)\n", value,swidth);
value = (swidth * 4096 / width) - 4096;
cx_write(MO_HSCALE_EVEN, value);
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/errno.h>
+#include <linux/freezer.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
msleep_interruptible(1000);
if (kthread_should_stop())
break;
+ try_to_freeze();
/* just monitor the audio status for now ... */
memset(&t, 0, sizeof(t));
static unsigned int inline norm_maxw(struct cx88_tvnorm *norm)
{
- return (norm->id & V4L2_STD_625_50) ? 768 : 640;
+ return (norm->id & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768;
}
if (dev->has_msp34xx) {
/* Send a reset to other chips via gpio */
em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
- udelay(2500);
+ msleep(3);
em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
- udelay(2500);
+ msleep(3);
}
video_mux(dev, 0);
*iarg = 0;
status = ks0127_read(ks, KS_STAT);
if (!(status & 0x20)) /* NOVID not set */
- *iarg = (*iarg & DECODER_STATUS_GOOD);
+ *iarg = (*iarg | DECODER_STATUS_GOOD);
if ((status & 0x01)) /* CLOCK set */
- *iarg = (*iarg & DECODER_STATUS_COLOR);
+ *iarg = (*iarg | DECODER_STATUS_COLOR);
if ((status & 0x08)) /* PALDET set */
- *iarg = (*iarg & DECODER_STATUS_PAL);
+ *iarg = (*iarg | DECODER_STATUS_PAL);
else
- *iarg = (*iarg & DECODER_STATUS_NTSC);
+ *iarg = (*iarg | DECODER_STATUS_NTSC);
break;
//Catch any unknown command
struct video_picture *p = arg;
if (p->depth != 16)
return -EINVAL;
- if (p->palette != VIDEO_PALETTE_YUV422)
+ if (p->palette != VIDEO_PALETTE_YUV422 && p->palette != VIDEO_PALETTE_YUYV)
return -EINVAL;
mutex_lock(&meye.lock);
sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS,
if (vm->frame >= gbuffers || vm->frame < 0)
return -EINVAL;
- if (vm->format != VIDEO_PALETTE_YUV422)
+ if (vm->format != VIDEO_PALETTE_YUV422 && vm->format != VIDEO_PALETTE_YUYV)
return -EINVAL;
if (vm->height * vm->width * 2 > gbufsize)
return -EINVAL;
if (((rt->input >> (4 + i * 4)) & 0xf) == 0)
extern_input = 0;
}
- if (extern_input)
- state->mode = MSP_MODE_EXTERN;
- else
- state->mode = MSP_MODE_AM_DETECT;
+ state->mode = extern_input ? MSP_MODE_EXTERN : MSP_MODE_AM_DETECT;
+ state->rxsubchans = V4L2_TUNER_SUB_STEREO;
msp_set_scart(client, sc_in, 0);
msp_set_scart(client, sc1_out, 1);
msp_set_scart(client, sc2_out, 2);
if (thread_func) {
state->kthread = kthread_run(thread_func, client, "msp34xx");
- if (state->kthread == NULL)
+ if (IS_ERR(state->kthread))
v4l_warn(client, "kernel_thread() failed\n");
msp_wake_thread(client);
}
/* no carrier scan, just unmute */
v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n");
state->scan_in_progress = 0;
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
msp_set_audio(client);
continue;
}
source = 1; /* stereo or A|B */
matrix = 0x20;
break;
- case V4L2_TUNER_MODE_STEREO:
case V4L2_TUNER_MODE_LANG1:
- default:
source = 3; /* stereo or A */
matrix = 0x00;
break;
+ case V4L2_TUNER_MODE_STEREO:
+ default:
+ source = 3; /* stereo or A */
+ matrix = 0x20;
+ break;
}
if (in == MSP_DSP_IN_TUNER)
int is_stereo = status & 0x40;
int oldrx = state->rxsubchans;
+ if (state->mode == MSP_MODE_EXTERN)
+ return 0;
+
state->rxsubchans = 0;
if (is_stereo)
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .gpiomask = 1 << 21,
.inputs = {{
.name = name_tv,
.vmux = 1,
},{
.name = name_comp1,
.vmux = 3,
- .amux = LINE1,
+ .amux = LINE2, /* unconfirmed, taken from Philips driver */
+ },{
+ .name = name_comp2,
+ .vmux = 0, /* untested, Composite over S-Video */
+ .amux = LINE2,
},{
.name = name_svideo,
- .vmux = 0,
- .amux = LINE1,
+ .vmux = 8,
+ .amux = LINE2,
}},
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
+ .gpio = 0x0200000,
},
},
[SAA7134_BOARD_CINERGY250PCI] = {
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
-static int use_frontent = 0;
-module_param(use_frontent, int, 0644);
-MODULE_PARM_DESC(use_frontent,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
+static int use_frontend = 0;
+module_param(use_frontend, int, 0644);
+MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
/* ------------------------------------------------------------------ */
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
}
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if(! use_frontent) { //terrestrial
+ if(! use_frontend) { //terrestrial
dev->dvb.frontend = dvb_attach(tda10046_attach,
&lifeview_trio_config,
&dev->i2c_adap);
{
if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) {
switch (pal[0]) {
+ case '6':
+ tuner_dbg ("insmod fixup: PAL => PAL-60\n");
+ t->std = V4L2_STD_PAL_60;
+ break;
case 'b':
case 'B':
case 'g':
{ TUNER_ABSENT, "Thompson DTT757"},
/* 80-89 */
{ TUNER_ABSENT, "Philips FQ1216LME MK3"},
- { TUNER_ABSENT, "LG TAPC G701D"},
+ { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"},
{ TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"},
{ TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"},
{ TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"},
};
struct bayL0 {
-#ifdef __BIG_ENDIAN
- u8 r;
- u8 g;
-#elif __LITTLE_ENDIAN
u8 g;
u8 r;
-#else
-#error not byte order defined
-#endif
};
struct bayL1 {
-#ifdef __BIG_ENDIAN
- u8 g;
- u8 b;
-#elif __LITTLE_ENDIAN
u8 b;
u8 g;
-#else
-#error not byte order defined
-#endif
};
struct cam_size {
{0x0573, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "D-Link V100"},
{0x0573, 0x2000, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "X10 USB Camera"},
{0x0573, 0x2d00, -1, CODEC_SAA7111, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, -1, 3, 7, "Osprey 50"},
- {0x0573, 0x2d01, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Hauppauge USB-Live Model 600"},
- {0x0573, 0x2101, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 2, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Zoran Co. PMD (Nogatech) AV-grabber Manhattan"},
+ {0x0573, 0x2d01, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Hauppauge USB-Live Model 600"},
+ {0x0573, 0x2101, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 2, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Zoran Co. PMD (Nogatech) AV-grabber Manhattan"},
{0x0573, 0x4100, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "Nogatech USB-TV (NTSC) FM"},
{0x0573, 0x4110, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "PNY USB-TV (NTSC) FM"},
{0x0573, 0x4450, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "PixelView PlayTv-USB PRO (PAL) FM"},
{0x0573, 0x4d37, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1, 0, 3, 7, "Hauppauge WinTV USB device Model 40219 Rev E189"},
{0x0768, 0x0006, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, 5, 5, -1, "Camtel Technology USB TV Genie Pro FM Model TVB330"},
{0x07d0, 0x0001, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Digital Video Creator I"},
- {0x07d0, 0x0002, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 82, 20, 7, "Global Village GV-007 (NTSC)"},
+ {0x07d0, 0x0002, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 82, 20, 7, "Global Village GV-007 (NTSC)"},
{0x07d0, 0x0003, 0, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)"},
{0x07d0, 0x0004, 0, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-80 Rev 1 (PAL)"},
- {0x07d0, 0x0005, 0, CODEC_SAA7113, 2, V4L2_STD_SECAM, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)"},
+ {0x07d0, 0x0005, 0, CODEC_SAA7113, 2, V4L2_STD_SECAM, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)"},
{0x2304, 0x010d, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 0, 0, 1, TUNER_TEMIC_4066FY5_PAL_I, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (PAL)"},
{0x2304, 0x0109, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (SECAM)"},
{0x2304, 0x0110, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1,128, 23, -1, "Pinnacle Studio PCTV USB (PAL) FM"},
{0x2304, 0x0300, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (NTSC)"},
{0x2304, 0x0301, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (PAL)"},
{0x2304, 0x0419, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle PCTV Bungee USB (PAL) FM"},
- {0x2400, 0x4200, -1, CODEC_SAA7111, 3, VIDEO_MODE_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
+ {0x2400, 0x4200, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
{} /* Terminating entry */
};
{ USB_DEVICE(0x2304, 0x0300) }, /* Pinnacle Studio Linx Video input cable (NTSC) */
{ USB_DEVICE(0x2304, 0x0301) }, /* Pinnacle Studio Linx Video input cable (PAL) */
{ USB_DEVICE(0x2304, 0x0419) }, /* Pinnacle PCTV Bungee USB (PAL) FM */
-
{ USB_DEVICE(0x2400, 0x4200) }, /* Hauppauge WinTv-USB2 Model 42012 */
{ } /* Terminating entry */
* This is used when initializing the contents of the area.
*/
-void *usbvision_rvmalloc(unsigned long size)
+static void *usbvision_rvmalloc(unsigned long size)
{
void *mem;
unsigned long adr;
/********************************
* scratch ring buffer handling
********************************/
-int scratch_len(struct usb_usbvision *usbvision) /*This returns the amount of data actually in the buffer */
+static int scratch_len(struct usb_usbvision *usbvision) /*This returns the amount of data actually in the buffer */
{
int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr;
if (len < 0) {
/* This returns the free space left in the buffer */
-int scratch_free(struct usb_usbvision *usbvision)
+static int scratch_free(struct usb_usbvision *usbvision)
{
int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr;
if (free <= 0) {
/* This puts data into the buffer */
-int scratch_put(struct usb_usbvision *usbvision, unsigned char *data, int len)
+static int scratch_put(struct usb_usbvision *usbvision, unsigned char *data,
+ int len)
{
int len_part;
}
/* This marks the write_ptr as position of new frame header */
-void scratch_mark_header(struct usb_usbvision *usbvision)
+static void scratch_mark_header(struct usb_usbvision *usbvision)
{
PDEBUG(DBG_SCRATCH, "header at write_ptr=%d\n", usbvision->scratch_headermarker_write_ptr);
}
/* This gets data from the buffer at the given "ptr" position */
-int scratch_get_extra(struct usb_usbvision *usbvision, unsigned char *data, int *ptr, int len)
+static int scratch_get_extra(struct usb_usbvision *usbvision,
+ unsigned char *data, int *ptr, int len)
{
int len_part;
if (*ptr + len < scratch_buf_size) {
/* This sets the scratch extra read pointer */
-void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr, int len)
+static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr,
+ int len)
{
*ptr = (usbvision->scratch_read_ptr + len)%scratch_buf_size;
/*This increments the scratch extra read pointer */
-void scratch_inc_extra_ptr(int *ptr, int len)
+static void scratch_inc_extra_ptr(int *ptr, int len)
{
*ptr = (*ptr + len) % scratch_buf_size;
/* This gets data from the buffer */
-int scratch_get(struct usb_usbvision *usbvision, unsigned char *data, int len)
+static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data,
+ int len)
{
int len_part;
if (usbvision->scratch_read_ptr + len < scratch_buf_size) {
/* This sets read pointer to next header and returns it */
-int scratch_get_header(struct usb_usbvision *usbvision,struct usbvision_frame_header *header)
+static int scratch_get_header(struct usb_usbvision *usbvision,
+ struct usbvision_frame_header *header)
{
int errCode = 0;
/*This removes len bytes of old data from the buffer */
-void scratch_rm_old(struct usb_usbvision *usbvision, int len)
+static void scratch_rm_old(struct usb_usbvision *usbvision, int len)
{
usbvision->scratch_read_ptr += len;
/*This resets the buffer - kills all data in it too */
-void scratch_reset(struct usb_usbvision *usbvision)
+static void scratch_reset(struct usb_usbvision *usbvision)
{
PDEBUG(DBG_SCRATCH, "\n");
int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
{
- usbvision->scratch = vmalloc(scratch_buf_size);
+ usbvision->scratch = vmalloc_32(scratch_buf_size);
scratch_reset(usbvision);
if(usbvision->scratch == NULL) {
err("%s: unable to allocate %d bytes for scratch",
* 1: Draw a colored grid
*
*/
-void usbvision_testpattern(struct usb_usbvision *usbvision, int fullframe,
- int pmode)
+static void usbvision_testpattern(struct usb_usbvision *usbvision,
+ int fullframe, int pmode)
{
static const char proc[] = "usbvision_testpattern";
struct usbvision_frame *frame;
int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
{
int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2;
- usbvision->IntraFrameBuffer = vmalloc(IFB_size);
+ usbvision->IntraFrameBuffer = vmalloc_32(IFB_size);
if (usbvision->IntraFrameBuffer == NULL) {
err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size);
return -ENOMEM;
usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
usbvision_write_reg(usbvision, USBVISION_PWR_REG,
USBVISION_SSPND_EN | USBVISION_RES2);
+
usbvision_write_reg(usbvision, USBVISION_PWR_REG,
USBVISION_SSPND_EN | USBVISION_PWR_VID);
errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
usbvision->Vin_Reg2_Preset)) < 0) return ret;
/* TODO: schedule timeout */
- while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) && 0x01) != 1);
+ while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1);
return 0;
}
return USBVISION_IS_OPERATIONAL(usbvision);
}
-
-int usbvision_sbuf_alloc(struct usb_usbvision *usbvision)
-{
- int i, errCode = 0;
- const int sb_size = USBVISION_URB_FRAMES * USBVISION_MAX_ISOC_PACKET_SIZE;
-
- /* Clean pointers so we know if we allocated something */
- for (i = 0; i < USBVISION_NUMSBUF; i++)
- usbvision->sbuf[i].data = NULL;
-
- for (i = 0; i < USBVISION_NUMSBUF; i++) {
- usbvision->sbuf[i].data = kzalloc(sb_size, GFP_KERNEL);
- if (usbvision->sbuf[i].data == NULL) {
- err("%s: unable to allocate %d bytes for sbuf", __FUNCTION__, sb_size);
- errCode = -ENOMEM;
- break;
- }
- }
- return errCode;
-}
-
-
-void usbvision_sbuf_free(struct usb_usbvision *usbvision)
-{
- int i;
-
- for (i = 0; i < USBVISION_NUMSBUF; i++) {
- if (usbvision->sbuf[i].data != NULL) {
- kfree(usbvision->sbuf[i].data);
- usbvision->sbuf[i].data = NULL;
- }
- }
-}
-
/*
* usbvision_init_isoc()
*
{
struct usb_device *dev = usbvision->dev;
int bufIdx, errCode, regValue;
+ const int sb_size = USBVISION_URB_FRAMES * USBVISION_MAX_ISOC_PACKET_SIZE;
if (!USBVISION_IS_OPERATIONAL(usbvision))
return -EFAULT;
return -ENOMEM;
}
usbvision->sbuf[bufIdx].urb = urb;
+ usbvision->sbuf[bufIdx].data = usb_buffer_alloc(usbvision->dev, sb_size, GFP_KERNEL,&urb->transfer_dma);
urb->dev = dev;
urb->context = usbvision;
urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp);
void usbvision_stop_isoc(struct usb_usbvision *usbvision)
{
int bufIdx, errCode, regValue;
+ const int sb_size = USBVISION_URB_FRAMES * USBVISION_MAX_ISOC_PACKET_SIZE;
if ((usbvision->streaming == Stream_Off) || (usbvision->dev == NULL))
return;
/* Unschedule all of the iso td's */
for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
usb_kill_urb(usbvision->sbuf[bufIdx].urb);
+ if (usbvision->sbuf[bufIdx].data){
+ usb_buffer_free(usbvision->dev,
+ sb_size,
+ usbvision->sbuf[bufIdx].data,
+ usbvision->sbuf[bufIdx].urb->transfer_dma);
+ }
usb_free_urb(usbvision->sbuf[bufIdx].urb);
usbvision->sbuf[bufIdx].urb = NULL;
}
static inline int try_write_address(struct i2c_adapter *i2c_adap,
unsigned char addr, int retries)
{
- struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
void *data;
int i, ret = -1;
char buf[4];
ret = (usbvision_i2c_write(data, addr, buf, 1));
if (ret == 1)
break; /* success! */
- udelay(5 /*adap->udelay */ );
+ udelay(5);
if (i == retries) /* no success */
break;
- udelay(adap->udelay);
+ udelay(10);
}
if (i) {
PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr);
static inline int try_read_address(struct i2c_adapter *i2c_adap,
unsigned char addr, int retries)
{
- struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
void *data;
int i, ret = -1;
char buf[4];
ret = (usbvision_i2c_read(data, addr, buf, 1));
if (ret == 1)
break; /* success! */
- udelay(5 /*adap->udelay */ );
+ udelay(5);
if (i == retries) /* no success */
break;
- udelay(adap->udelay);
+ udelay(10);
}
if (i) {
PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr);
/*
* registering functions to load algorithms at runtime
*/
-int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap)
+static int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap)
{
PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]");
PDEBUG(DBG_ALGO, "ALGO debugging is enabled [i2c]");
/* usbvision specific I2C functions */
/* ----------------------------------------------------------------------- */
static struct i2c_adapter i2c_adap_template;
-static struct i2c_algo_usb_data i2c_algo_template;
static struct i2c_client i2c_client_template;
int usbvision_init_i2c(struct usb_usbvision *usbvision)
{
memcpy(&usbvision->i2c_adap, &i2c_adap_template,
sizeof(struct i2c_adapter));
- memcpy(&usbvision->i2c_algo, &i2c_algo_template,
- sizeof(struct i2c_algo_usb_data));
memcpy(&usbvision->i2c_client, &i2c_client_template,
sizeof(struct i2c_client));
i2c_set_adapdata(&usbvision->i2c_adap, usbvision);
i2c_set_clientdata(&usbvision->i2c_client, usbvision);
- i2c_set_algo_usb_data(&usbvision->i2c_algo, usbvision);
- usbvision->i2c_adap.algo_data = &usbvision->i2c_algo;
usbvision->i2c_client.adapter = &usbvision->i2c_adap;
if (usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_IIC_LRNACK) < 0) {
void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd,
void *arg)
{
- BUG_ON(NULL == usbvision->i2c_adap.algo_data);
i2c_clients_command(&usbvision->i2c_adap, cmd, arg);
}
case 0x4a:
PDEBUG(DBG_I2C,"attach_inform: saa7113 detected.");
break;
+ case 0x48:
+ PDEBUG(DBG_I2C,"attach_inform: saa7111 detected.");
+ break;
case 0xa0:
PDEBUG(DBG_I2C,"attach_inform: eeprom detected.");
break;
return rdcount;
}
-static struct i2c_algo_usb_data i2c_algo_template = {
- .data = NULL,
- .inb = usbvision_i2c_read,
- .outb = usbvision_i2c_write,
- .udelay = 10,
- .mdelay = 10,
- .timeout = 100,
-};
-
static struct i2c_adapter i2c_adap_template = {
.owner = THIS_MODULE,
.name = "usbvision",
.id = I2C_HW_B_BT848, /* FIXME */
- .algo = NULL,
- .algo_data = NULL,
.client_register = attach_inform,
.client_unregister = detach_inform,
#ifdef I2C_ADAP_CLASS_TV_ANALOG
.name = "usbvision internal",
};
-EXPORT_SYMBOL(usbvision_i2c_usb_add_bus);
-EXPORT_SYMBOL(usbvision_i2c_usb_del_bus);
-
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd)
{
- struct video_device *vdev = to_video_device(cd);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
return video_get_drvdata(vdev);
}
}
static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
-static ssize_t show_model(struct class_device *class_dev, char *buf)
+static ssize_t show_model(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString);
}
static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
-static ssize_t show_hue(struct class_device *class_dev, char *buf)
+static ssize_t show_hue(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_HUE;
ctrl.value = 0;
- call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ if(usbvision->user)
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
-static ssize_t show_contrast(struct class_device *class_dev, char *buf)
+static ssize_t show_contrast(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_CONTRAST;
ctrl.value = 0;
- call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ if(usbvision->user)
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
-static ssize_t show_brightness(struct class_device *class_dev, char *buf)
+static ssize_t show_brightness(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_BRIGHTNESS;
ctrl.value = 0;
- call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ if(usbvision->user)
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
-static ssize_t show_saturation(struct class_device *class_dev, char *buf)
+static ssize_t show_saturation(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_SATURATION;
ctrl.value = 0;
- call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ if(usbvision->user)
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
-static ssize_t show_streaming(struct class_device *class_dev, char *buf)
+static ssize_t show_streaming(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->streaming==Stream_On?1:0));
}
static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
-static ssize_t show_compression(struct class_device *class_dev, char *buf)
+static ssize_t show_compression(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
}
static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
-static ssize_t show_device_bridge(struct class_device *class_dev, char *buf)
+static ssize_t show_device_bridge(struct class_device *cd, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
+ struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->bridgeType);
}
static void usbvision_create_sysfs(struct video_device *vdev)
{
int res;
- if (vdev) {
- res=video_device_create_file(vdev, &class_device_attr_version);
- res=video_device_create_file(vdev, &class_device_attr_model);
- res=video_device_create_file(vdev, &class_device_attr_hue);
- res=video_device_create_file(vdev, &class_device_attr_contrast);
- res=video_device_create_file(vdev, &class_device_attr_brightness);
- res=video_device_create_file(vdev, &class_device_attr_saturation);
- res=video_device_create_file(vdev, &class_device_attr_streaming);
- res=video_device_create_file(vdev, &class_device_attr_compression);
- res=video_device_create_file(vdev, &class_device_attr_bridge);
- }
+ if (!vdev)
+ return;
+ do {
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_version);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_model);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_hue);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_contrast);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_brightness);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_saturation);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_streaming);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_compression);
+ if (res<0)
+ break;
+ res=class_device_create_file(&vdev->class_dev,
+ &class_device_attr_bridge);
+ if (res>=0)
+ return;
+ } while (0);
+
+ err("%s error: %d\n", __FUNCTION__, res);
}
static void usbvision_remove_sysfs(struct video_device *vdev)
{
if (vdev) {
- video_device_remove_file(vdev, &class_device_attr_version);
- video_device_remove_file(vdev, &class_device_attr_model);
- video_device_remove_file(vdev, &class_device_attr_hue);
- video_device_remove_file(vdev, &class_device_attr_contrast);
- video_device_remove_file(vdev, &class_device_attr_brightness);
- video_device_remove_file(vdev, &class_device_attr_saturation);
- video_device_remove_file(vdev, &class_device_attr_streaming);
- video_device_remove_file(vdev, &class_device_attr_compression);
- video_device_remove_file(vdev, &class_device_attr_bridge);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_version);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_model);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_hue);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_contrast);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_brightness);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_saturation);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_streaming);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_compression);
+ class_device_remove_file(&vdev->class_dev,
+ &class_device_attr_bridge);
}
}
if(!errCode) {
/* Allocate memory for the scratch ring buffer */
errCode = usbvision_scratch_alloc(usbvision);
- if(!errCode) {
- /* Allocate memory for the USB S buffers */
- errCode = usbvision_sbuf_alloc(usbvision);
- if ((!errCode) && (usbvision->isocMode==ISOC_MODE_COMPRESS)) {
- /* Allocate intermediate decompression buffers only if needed */
- errCode = usbvision_decompress_alloc(usbvision);
- }
+ if ((!errCode) && (isocMode==ISOC_MODE_COMPRESS)) {
+ /* Allocate intermediate decompression buffers only if needed */
+ errCode = usbvision_decompress_alloc(usbvision);
}
}
if (errCode) {
/* Deallocate all buffers if trouble */
usbvision_frames_free(usbvision);
usbvision_scratch_free(usbvision);
- usbvision_sbuf_free(usbvision);
usbvision_decompress_free(usbvision);
}
}
usbvision_stop_isoc(usbvision);
usbvision_decompress_free(usbvision);
- usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size);
+ usbvision_frames_free(usbvision);
usbvision_scratch_free(usbvision);
- usbvision_sbuf_free(usbvision);
usbvision->user--;
int noblock = file->f_flags & O_NONBLOCK;
unsigned long lock_flags;
- int frmx = -1;
int ret,i;
struct usbvision_frame *frame;
frame->bytes_read = 0;
/* Mark it as available to be used again. */
- usbvision->frame[frmx].grabstate = FrameState_Unused;
+ frame->grabstate = FrameState_Unused;
/* } */
return count;
* This procedure preprocesses CustomDevice parameter if any
*
*/
-void customdevice_process(void)
+static void customdevice_process(void)
{
usbvision_device_data[0]=usbvision_device_data[1];
usbvision_table[0]=usbvision_table[1];
{
case 'P':
PDEBUG(DBG_PROBE, "VideoNorm=PAL");
- usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL;
+ usbvision_device_data[0].VideoNorm=V4L2_STD_PAL;
break;
case 'S':
PDEBUG(DBG_PROBE, "VideoNorm=SECAM");
- usbvision_device_data[0].VideoNorm=VIDEO_MODE_SECAM;
+ usbvision_device_data[0].VideoNorm=V4L2_STD_SECAM;
break;
case 'N':
PDEBUG(DBG_PROBE, "VideoNorm=NTSC");
- usbvision_device_data[0].VideoNorm=VIDEO_MODE_NTSC;
+ usbvision_device_data[0].VideoNorm=V4L2_STD_NTSC;
break;
default:
PDEBUG(DBG_PROBE, "VideoNorm=PAL (by default)");
- usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL;
+ usbvision_device_data[0].VideoNorm=V4L2_STD_PAL;
break;
}
goto2next(parse);
((udevice)->last_error == 0) && \
(!(udevice)->remove_pending))
-/* I2C structures */
-struct i2c_algo_usb_data {
- void *data; /* private data for lowlevel routines */
- int (*inb) (void *data, unsigned char addr, char *buf, short len);
- int (*outb) (void *data, unsigned char addr, char *buf, short len);
-
- /* local settings */
- int udelay;
- int mdelay;
- int timeout;
-};
-
#define I2C_USB_ADAP_MAX 16
/* ----------------------------------------------------------------- */
/* i2c Declaration Section*/
struct i2c_adapter i2c_adap;
- struct i2c_algo_usb_data i2c_algo;
struct i2c_client i2c_client;
struct urb *ctrlUrb;
/* i2c-algo-usb declaration */
/* --------------------------------------------------------------- */
-int usbvision_i2c_usb_add_bus(struct i2c_adapter *);
int usbvision_i2c_usb_del_bus(struct i2c_adapter *);
-static inline void *i2c_get_algo_usb_data (struct i2c_algo_usb_data *dev)
-{
- return dev->data;
-}
-
-static inline void i2c_set_algo_usb_data (struct i2c_algo_usb_data *dev, void *data)
-{
- dev->data = data;
-}
-
/* ----------------------------------------------------------------------- */
/* usbvision specific I2C functions */
void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd,void *arg);
/* defined in usbvision-core.c */
-void *usbvision_rvmalloc(unsigned long size);
void usbvision_rvfree(void *mem, unsigned long size);
int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg);
int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
void usbvision_frames_free(struct usb_usbvision *usbvision);
int usbvision_scratch_alloc(struct usb_usbvision *usbvision);
void usbvision_scratch_free(struct usb_usbvision *usbvision);
-int usbvision_sbuf_alloc(struct usb_usbvision *usbvision);
-void usbvision_sbuf_free(struct usb_usbvision *usbvision);
int usbvision_decompress_alloc(struct usb_usbvision *usbvision);
void usbvision_decompress_free(struct usb_usbvision *usbvision);
char *v4l2_norm_to_name(v4l2_std_id id)
{
char *name;
+ u32 myid = id;
- switch (id) {
+ /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
+ 64 bit comparations. So, on that architecture, with some gcc variants,
+ compilation fails. Currently, the max value is 30bit wide.
+ */
+ BUG_ON(myid != id);
+
+ switch (myid) {
case V4L2_STD_PAL:
name="PAL"; break;
case V4L2_STD_PAL_BG:
goto done;
}
if (buf->state == STATE_QUEUED ||
+ buf->state == STATE_PREPARED ||
buf->state == STATE_ACTIVE) {
dprintk(1,"qbuf: buffer is already queued or active.\n");
goto done;
vaddr,vma->vm_start,vma->vm_end);
if (vaddr > vma->vm_end)
return NOPAGE_SIGBUS;
- page = alloc_page(GFP_USER);
+ page = alloc_page(GFP_USER | __GFP_DMA32);
if (!page)
return NOPAGE_OOM;
clear_user_page(page_address(page), vaddr, page);
char *p,*s,*basep;
struct page *pg;
u8 chr,r,g,b,color;
+ unsigned long flags;
+ spinlock_t spinlock;
+
+ spin_lock_init(&spinlock);
/* Get first addr pointed to pixel position */
oldpg=get_addr_pos(pos,pages,to_addr);
pg=pfn_to_page(sg_dma_address(to_addr[oldpg].sg) >> PAGE_SHIFT);
+ spin_lock_irqsave(&spinlock,flags);
basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset;
/* We will just duplicate the second pixel at the packet */
end:
kunmap_atomic(basep, KM_BOUNCE_READ);
+ spin_unlock_irqrestore(&spinlock,flags);
+
}
static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
{
dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi");
- if (dma_q->kthread == NULL) {
+ if (IS_ERR(dma_q->kthread)) {
printk(KERN_ERR "vivi: kernel_thread() failed\n");
- return -EINVAL;
+ return PTR_ERR(dma_q->kthread);
}
dprintk(1,"returning from %s\n",__FUNCTION__);
return 0;
struct vivi_dev *h;
struct list_head *list;
- list_for_each(list,&vivi_devlist) {
+ while (!list_empty(&vivi_devlist)) {
+ list = vivi_devlist.next;
+ list_del(list);
h = list_entry(list, struct vivi_dev, vivi_devlist);
kfree (h);
}
case VIDIOCSPICT:
{
struct video_picture *vpic = arg;
- if (vpic->depth != 16 || vpic->palette != VIDEO_PALETTE_YUV422)
+ if (vpic->depth != 16 || (vpic->palette != VIDEO_PALETTE_YUV422 && vpic->palette != VIDEO_PALETTE_YUYV))
return -EINVAL;
cam->brightness = vpic->brightness >> 8;
int err = 0;
/* Work around to avoid FP arithmetics */
- #define __SC(x) ((x) << 10)
- #define __UNSC(x) ((x) >> 10)
+ #define SC(x) ((x) << 10)
+ #define UNSC(x) ((x) >> 10)
/* Make sure we are using a supported resolution */
if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
goto error;
/* Scaling factors */
- fw = __SC(win.width) / cam->maxwidth;
- fh = __SC(win.height) / cam->maxheight;
+ fw = SC(win.width) / cam->maxwidth;
+ fh = SC(win.height) / cam->maxheight;
/* Set up the width and height values used by the chip */
if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
cam->vpp_flag |= VPP_UPSCALE;
/* Calculate largest w,h mantaining the same w/h ratio */
- w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
- h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
+ w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
+ h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
if (w < cam->minwidth) /* just in case */
w = cam->minwidth;
if (h < cam->minheight) /* just in case */
/* Calculate cropped area manteining the right w/h ratio */
if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
- cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
- ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
+ cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
+ ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
} else {
cw = w;
ch = h;
/* We have to scale win.x and win.y offsets */
if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
|| (cam->vpp_flag & VPP_UPSCALE) ) {
- ax = __SC(win.x)/fw;
- ay = __SC(win.y)/fh;
+ ax = SC(win.x)/fw;
+ ay = SC(win.y)/fh;
} else {
ax = win.x;
ay = win.y;
/* Adjust win.x, win.y */
if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
|| (cam->vpp_flag & VPP_UPSCALE) ) {
- win.x = __UNSC(ax*fw);
- win.y = __UNSC(ay*fh);
+ win.x = UNSC(ax*fw);
+ win.y = UNSC(ay*fh);
} else {
win.x = ax;
win.y = ay;
reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
reg |= (DispMode << ZR36057_VFESPFR_DispMode);
- if (format->palette != VIDEO_PALETTE_YUV422)
+ if (format->palette != VIDEO_PALETTE_YUV422 && format->palette != VIDEO_PALETTE_YUYV)
reg |= ZR36057_VFESPFR_LittleEndian;
/* RJ: I don't know, why the following has to be the opposite
* of the corresponding ZR36060 setting, but only this way
reg |= ZR36057_VFESPFR_TopField;
switch (format->palette) {
+ case VIDEO_PALETTE_YUYV:
case VIDEO_PALETTE_YUV422:
reg |= ZR36057_VFESPFR_YUV422;
break;
* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*
* cmd line parameters
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
#endif
#ifndef COPYRIGHT
-#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
+#define COPYRIGHT "Copyright (c) 1999-2007 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.02"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.02"
+#define MPT_LINUX_VERSION_COMMON "3.04.03"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.03"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
-#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__)
+#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__) || defined(__powerpc__)
#define CAST_U32_TO_PTR(x) ((void *)(u64)x)
#define CAST_PTR_TO_U32(x) ((u32)(u64)x)
#else
* For use with LSI Logic PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
-#define COPYRIGHT "Copyright (c) 1999-2005 LSI Logic Corporation"
+#define COPYRIGHT "Copyright (c) 1999-2007 LSI Logic Corporation"
#define MODULEAUTHOR "LSI Logic Corporation"
#include "mptbase.h"
#include "mptctl.h"
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/* Command line args */
#define MPTFC_DEV_LOSS_TMO (60)
* For use with LSI Logic Fibre Channel PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 2000-2005 LSI Logic Corporation
+ * Copyright (c) 2000-2007 LSI Logic Corporation
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include <linux/module.h>
#include <linux/fs.h>
+#define my_VERSION MPT_LINUX_VERSION_COMMON
#define MYNAM "mptlan"
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* For use with LSI Logic Fibre Channel PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 2000-2005 LSI Logic Corporation
+ * Copyright (c) 2000-2007 LSI Logic Corporation
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
- * Copyright (c) 2005-2006 Dell
+ * Copyright (c) 2005-2007 Dell
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
static int mpt_pt_clear;
module_param(mpt_pt_clear, int, 0);
printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle));
printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
- printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
+ printk("SAS Address=0x%llX\n", (unsigned long long)
+ le64_to_cpu(sas_address));
printk("Target ID=0x%X\n", pg0->TargetID);
printk("Bus=0x%X\n", pg0->Bus);
/* The PhyNum field specifies the PHY number of the parent
phy_info = port_info->phy_info;
dsaswideprintk((KERN_DEBUG "%s: [%p]: num_phys=%02d "
- "bitmask=0x%016llX\n",
- __FUNCTION__, port_details, port_details->num_phys,
- port_details->phy_bitmask));
+ "bitmask=0x%016llX\n", __FUNCTION__, port_details,
+ port_details->num_phys, (unsigned long long)
+ port_details->phy_bitmask));
for (i = 0; i < port_info->num_phys; i++, phy_info++) {
if(phy_info->port_details != port_details)
for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
sas_address = phy_info->attached.sas_address;
dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
- i, sas_address));
+ i, (unsigned long long)sas_address));
if (!sas_address)
continue;
port_details = phy_info->port_details;
(1 << phy_info->phy_id);
phy_info->sas_port_add_phy=1;
dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t"
- "phy_id=%d sas_address=0x%018llX\n",
- i, sas_address));
+ "phy_id=%d sas_address=0x%018llX\n",
+ i, (unsigned long long)sas_address));
phy_info->port_details = port_details;
}
if (phy_info_cmp->port_details == port_details )
continue;
dsaswideprintk((KERN_DEBUG
- "\t\tphy_id=%d sas_address=0x%018llX\n",
- j, phy_info_cmp->attached.sas_address));
+ "\t\tphy_id=%d sas_address=0x%018llX\n",
+ j, (unsigned long long)
+ phy_info_cmp->attached.sas_address));
if (phy_info_cmp->port_details) {
port_details->rphy =
mptsas_get_rphy(phy_info_cmp);
if (!port_details)
continue;
dsaswideprintk((KERN_DEBUG
- "%s: [%p]: phy_id=%02d num_phys=%02d "
- "bitmask=0x%016llX\n",
- __FUNCTION__,
- port_details, i, port_details->num_phys,
- port_details->phy_bitmask));
+ "%s: [%p]: phy_id=%02d num_phys=%02d "
+ "bitmask=0x%016llX\n", __FUNCTION__,
+ port_details, i, port_details->num_phys,
+ (unsigned long long)port_details->phy_bitmask));
dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n",
port_details->port, port_details->rphy));
}
static void
mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
{
+ int rc;
+
sdev->no_uld_attach = data ? 1 : 0;
- scsi_device_reprobe(sdev);
+ rc = scsi_device_reprobe(sdev);
}
static void
* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
break;
}
}
+ } else if (ioc->bus_type == FC) {
+ /*
+ * The FC IOC may kill a request for variety of
+ * reasons, some of which may be recovered by a
+ * retry, some which are unlikely to be
+ * recovered. Return DID_ERROR instead of
+ * DID_RESET to permit retry of the command,
+ * just not an infinite number of them
+ */
+ sc->result = DID_ERROR << 16;
+ break;
}
/*
struct scsi_device *sdev)
{
dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
- hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
+ hd->ioc->name, vtarget->bus_id, vtarget->target_id,
+ sdev->lun, hd));
/* Is LUN supported? If so, upper 2 bits will be 0
* in first byte of inquiry data.
else {
factor = MPT_ULTRA320;
if (scsi_device_qas(sdev)) {
- ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
+ ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
noQas = 0;
}
if (sdev->type == TYPE_TAPE &&
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/* Command line args */
static int mpt_saf_te = MPTSCSIH_SAF_TE;
/**
* i2o_exec_lct_modified - Called on LCT NOTIFY reply
- * @work: work struct for a specific controller
+ * @_work: work struct for a specific controller
*
* This function handles asynchronus LCT NOTIFY replies. It parses the
* new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY
/* Register backlight stuff */
- msibl_device = backlight_device_register("msi-laptop-bl", NULL, &msibl_props);
+ msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL,
+ &msibl_props);
if (IS_ERR(msibl_device))
return PTR_ERR(msibl_device);
return IRQ_HANDLED;
}
-int at91_mci_get_ro(struct mmc_host *mmc)
+static int at91_mci_get_ro(struct mmc_host *mmc)
{
int read_only = 0;
struct at91mci_host *host = mmc_priv(mmc);
/*
* Probe for the device
*/
-static int at91_mci_probe(struct platform_device *pdev)
+static int __init at91_mci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct at91mci_host *host;
/*
* Remove a device
*/
-static int at91_mci_remove(struct platform_device *pdev)
+static int __exit at91_mci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct at91mci_host *host;
#endif
static struct platform_driver at91_mci_driver = {
- .probe = at91_mci_probe,
- .remove = at91_mci_remove,
+ .remove = __exit_p(at91_mci_remove),
.suspend = at91_mci_suspend,
.resume = at91_mci_resume,
.driver = {
static int __init at91_mci_init(void)
{
- return platform_driver_register(&at91_mci_driver);
+ return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
}
static void __exit at91_mci_exit(void)
case MMC_RSP_R3: /* short */
cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
break;
- case MMC_RSP_R6: /* short CRC */
- cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R6;
- break;
default:
break;
}
{
writel(0, host->base + MMCICOMMAND);
+ BUG_ON(host->data);
+
host->mrq = NULL;
host->cmd = NULL;
}
if (!cmd->data || cmd->error != MMC_ERR_NONE) {
+ if (host->data)
+ mmci_stop_data(host);
mmci_request_end(host, cmd->mrq);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
#define DRIVER_NAME "mmci-omap"
-#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
/* Specifies how often in millisecs to poll for card status changes
* when the cover switch is open */
cmdtype = 0;
/* Our hardware needs to know exact type */
- switch (RSP_TYPE(mmc_resp_type(cmd))) {
- case RSP_TYPE(MMC_RSP_R1):
- /* resp 1, resp 1b */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ break;
+ case MMC_RSP_R1:
+ case MMC_RSP_R1B:
+ /* resp 1, 1b, 6, 7 */
resptype = 1;
break;
- case RSP_TYPE(MMC_RSP_R2):
+ case MMC_RSP_R2:
resptype = 2;
break;
- case RSP_TYPE(MMC_RSP_R3):
+ case MMC_RSP_R3:
resptype = 3;
break;
default:
+ dev_err(mmc_dev(host->mmc), "Invalid response type: %04x\n", mmc_resp_type(cmd));
break;
}
schedule_work(&host->switch_work);
}
-static void mmc_omap_switch_handler(void *data)
+static void mmc_omap_switch_handler(struct work_struct *work)
{
- struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+ struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, switch_work);
struct mmc_card *card;
static int complained = 0;
int cards = 0, cover_open;
platform_set_drvdata(pdev, host);
if (host->switch_pin >= 0) {
- INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
+ INIT_WORK(&host->switch_work, mmc_omap_switch_handler);
init_timer(&host->switch_timer);
host->switch_timer.function = mmc_omap_switch_timer;
host->switch_timer.data = (unsigned long) host;
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
switch (RSP_TYPE(mmc_resp_type(cmd))) {
- case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
+ case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
cmdat |= CMDAT_RESP_SHORT;
break;
case RSP_TYPE(MMC_RSP_R3):
case MMC_RSP_R3:
rc |= TIFM_MMCSD_RSP_R3;
break;
- case MMC_RSP_R6:
- rc |= TIFM_MMCSD_RSP_R6;
- break;
default:
BUG();
}
memory chips, and also use ioctl() to obtain information about
the device, or to erase parts of it.
+config MTD_BLKDEVS
+ tristate "Common interface to block layer for MTD 'translation layers'"
+ depends on MTD && BLOCK
+ default n
+
config MTD_BLOCK
tristate "Caching block device access to MTD devices"
depends on MTD && BLOCK
+ select MTD_BLKDEVS
---help---
Although most flash chips have an erase size too large to be useful
as block devices, it is possible to use MTD devices which are based
config MTD_BLOCK_RO
tristate "Readonly block device access to MTD devices"
depends on MTD_BLOCK!=y && MTD && BLOCK
+ select MTD_BLKDEVS
help
This allows you to mount read-only file systems (such as cramfs)
from an MTD device, without the overhead (and danger) of the caching
config FTL
tristate "FTL (Flash Translation Layer) support"
depends on MTD && BLOCK
+ select MTD_BLKDEVS
---help---
This provides support for the original Flash Translation Layer which
is part of the PCMCIA specification. It uses a kind of pseudo-
config NFTL
tristate "NFTL (NAND Flash Translation Layer) support"
depends on MTD && BLOCK
+ select MTD_BLKDEVS
---help---
This provides support for the NAND Flash Translation Layer which is
used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
config INFTL
tristate "INFTL (Inverse NAND Flash Translation Layer) support"
depends on MTD && BLOCK
+ select MTD_BLKDEVS
---help---
This provides support for the Inverse NAND Flash Translation
Layer which is used on M-Systems' newer DiskOnChip devices. It
config RFD_FTL
tristate "Resident Flash Disk (Flash Translation Layer) support"
depends on MTD && BLOCK
+ select MTD_BLKDEVS
---help---
This provides support for the flash translation layer known
as the Resident Flash Disk (RFD), as used by the Embedded BIOS
config SSFDC
tristate "NAND SSFDC (SmartMedia) read only translation layer"
- depends on MTD
- default n
+ depends on MTD && BLOCK
+ select MTD_BLKDEVS
help
This enables read only access to SmartMedia formatted NAND
flash. You can mount it with FAT file system.
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
-obj-$(CONFIG_MTD_BLOCK) += mtdblock.o mtd_blkdevs.o
-obj-$(CONFIG_MTD_BLOCK_RO) += mtdblock_ro.o mtd_blkdevs.o
-obj-$(CONFIG_FTL) += ftl.o mtd_blkdevs.o
-obj-$(CONFIG_NFTL) += nftl.o mtd_blkdevs.o
-obj-$(CONFIG_INFTL) += inftl.o mtd_blkdevs.o
-obj-$(CONFIG_RFD_FTL) += rfd_ftl.o mtd_blkdevs.o
-obj-$(CONFIG_SSFDC) += ssfdc.o mtd_blkdevs.o
+obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
+obj-$(CONFIG_MTD_BLOCK) += mtdblock.o
+obj-$(CONFIG_MTD_BLOCK_RO) += mtdblock_ro.o
+obj-$(CONFIG_FTL) += ftl.o
+obj-$(CONFIG_NFTL) += nftl.o
+obj-$(CONFIG_INFTL) += inftl.o
+obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
+obj-$(CONFIG_SSFDC) += ssfdc.o
nftl-objs := nftlcore.o nftlmount.o
inftl-objs := inftlcore.o inftlmount.o
if (!sz)
return ret;
- parts = kmalloc(sz, GFP_KERNEL);
+ parts = kzalloc(sz, GFP_KERNEL);
if (!parts)
return -ENOMEM;
- memset(parts, 0, sz);
str = (char *)(parts + idx);
/*
int reg_idx;
int offset;
- mtd = (struct mtd_info*)kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd) {
printk(KERN_WARNING
"%s: kmalloc failed for info structure\n", map->name);
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
mtd->priv = map;
memset(&temp, 0, sizeof(temp));
struct mtd_info *mtd;
int i;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd) {
printk(KERN_ERR "Failed to allocate memory for MTD device\n");
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
mtd->priv = map;
mtd->type = MTD_NORFLASH;
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
if (chip->oldstate == FL_READY) {
+ /* place the chip in a known state before suspend */
+ map_write(map, CMD(0xFF), cfi->chips[i].start);
chip->oldstate = chip->state;
chip->state = FL_PM_SUSPENDED;
/* No need to wake_up() on this state change -
#define MANUFACTURER_ATMEL 0x001F
#define MANUFACTURER_SST 0x00BF
#define SST49LF004B 0x0060
+#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
};
static struct cfi_fixup jedec_fixup_table[] = {
{ MANUFACTURER_SST, SST49LF004B, fixup_use_fwh_lock, NULL, },
+ { MANUFACTURER_SST, SST49LF040B, fixup_use_fwh_lock, NULL, },
{ MANUFACTURER_SST, SST49LF008A, fixup_use_fwh_lock, NULL, },
{ 0, 0, NULL, NULL }
};
struct mtd_info *mtd;
int i;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd) {
printk(KERN_WARNING "Failed to allocate memory for MTD device\n");
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
mtd->priv = map;
mtd->type = MTD_NORFLASH;
if (mode == FL_WRITING) /* FIXME: Erase-suspend-program appears broken. */
goto sleep;
- if (!(mode == FL_READY || mode == FL_POINT
+ if (!( mode == FL_READY
+ || mode == FL_POINT
|| !cfip
|| (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))
- || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1))))
+ || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1)
+ )))
goto sleep;
/* We could check to see if we're trying to access the sector
int i,j;
unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
if (!mtd) {
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
mtd->priv = map;
mtd->type = MTD_NORFLASH;
mtd->size = devsize * cfi->numchips;
if (mtd) {
if (mtd->size > map->size) {
printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n",
- (unsigned long)mtd->size >> 10,
+ (unsigned long)mtd->size >> 10,
(unsigned long)map->size >> 10);
mtd->size = map->size;
}
}
mapsize = (max_chips + BITS_PER_LONG-1) / BITS_PER_LONG;
- chip_map = kmalloc(mapsize, GFP_KERNEL);
+ chip_map = kzalloc(mapsize, GFP_KERNEL);
if (!chip_map) {
printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
kfree(cfi.cfiq);
return NULL;
}
- memset (chip_map, 0, mapsize);
set_bit(0, chip_map); /* Mark first chip valid */
char Part[200];
memset(&priv,0,sizeof(priv));
- MTD = kmalloc(sizeof(struct mtd_info) + sizeof(struct jedec_private), GFP_KERNEL);
+ MTD = kzalloc(sizeof(struct mtd_info) + sizeof(struct jedec_private), GFP_KERNEL);
if (!MTD)
return NULL;
- memset(MTD, 0, sizeof(struct mtd_info) + sizeof(struct jedec_private));
priv = (struct jedec_private *)&MTD[1];
my_bank_size = map->size;
#define SST39SF010A 0x00B5
#define SST39SF020A 0x00B6
#define SST49LF004B 0x0060
+#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define SST49LF030A 0x001C
#define SST49LF040A 0x0051
ERASEINFO(0x01000,64),
}
}, {
+ .mfr_id = MANUFACTURER_SST,
+ .dev_id = SST49LF040B,
+ .name = "SST 49LF040B",
+ .uaddr = {
+ [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+ },
+ .DevSize = SIZE_512KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,128),
+ }
+ }, {
+
.mfr_id = MANUFACTURER_SST,
.dev_id = SST49LF004B,
.name = "SST 49LF004B",
/*
- * There is a BIG problem properly ID'ing the JEDEC devic and guaranteeing
+ * There is a BIG problem properly ID'ing the JEDEC device and guaranteeing
* the mapped address, unlock addresses, and proper chip ID. This function
* attempts to minimize errors. It is doubtfull that this probe will ever
* be perfect - consequently there should be some module parameters that
{
struct mtd_info *mtd;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd) {
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
-
map->fldrv = &map_absent_chipdrv;
mtd->priv = map;
mtd->name = map->name;
#endif
/* OK. It seems to be RAM. */
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd)
return NULL;
- memset(mtd, 0, sizeof(*mtd));
-
map->fldrv = &mapram_chipdrv;
mtd->priv = map;
mtd->name = map->name;
{
struct mtd_info *mtd;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd)
return NULL;
- memset(mtd, 0, sizeof(*mtd));
-
map->fldrv = &maprom_chipdrv;
mtd->priv = map;
mtd->name = map->name;
struct sharp_info *sharp = NULL;
int width;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if(!mtd)
return NULL;
- sharp = kmalloc(sizeof(*sharp), GFP_KERNEL);
+ sharp = kzalloc(sizeof(*sharp), GFP_KERNEL);
if(!sharp) {
kfree(mtd);
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
-
width = sharp_probe_map(map,mtd);
if(!width){
kfree(mtd);
mtd->writesize = 1;
mtd->name = map->name;
- memset(sharp, 0, sizeof(*sharp));
sharp->chipshift = 23;
sharp->numchips = 1;
sharp->chips[0].start = 0;
*num_parts = this_part + 1;
alloc_size = *num_parts * sizeof(struct mtd_partition) +
extra_mem_size;
- parts = kmalloc(alloc_size, GFP_KERNEL);
+ parts = kzalloc(alloc_size, GFP_KERNEL);
if (!parts)
{
printk(KERN_ERR ERRP "out of memory\n");
return NULL;
}
- memset(parts, 0, alloc_size);
extra_mem = (unsigned char *)(parts + *num_parts);
}
/* enter this partition (offset will be calculated later if it is zero at this point) */
*
* This function needs to be visible for bootloaders.
*/
-int mtdpart_setup(char *s)
+static int mtdpart_setup(char *s)
{
cmdline = s;
return 1;
if (!devname)
return NULL;
- dev = kmalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
/* Get a handle on the device */
bdev = open_bdev_excl(devname, O_RDWR, NULL);
* or JEDEC get-id commands. Try them ...
*/
DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
- flash->spi->dev.bus_id);
+ spi->dev.bus_id);
return -ENODEV;
}
}
if (i == ARRAY_SIZE(m25p_data)) {
DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
- flash->spi->dev.bus_id, data->type);
+ spi->dev.bus_id, data->type);
return -ENODEV;
}
int ret = -ENODEV;
/* The module decodes 8MiB of address space. */
- mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL);
+ mod_res = kzalloc(sizeof(*mod_res), GFP_KERNEL);
if (!mod_res)
return -ENOMEM;
- memset(mod_res, 0, sizeof(*mod_res));
mod_res->name = ms02nv_name;
mod_res->start = addr;
mod_res->end = addr + MS02NV_SLOT_SIZE - 1;
}
ret = -ENOMEM;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
if (!mtd)
goto err_out_mod_res_rel;
- memset(mtd, 0, sizeof(*mtd));
- mp = kmalloc(sizeof(*mp), GFP_KERNEL);
+ mp = kzalloc(sizeof(*mp), GFP_KERNEL);
if (!mp)
goto err_out_mtd;
- memset(mp, 0, sizeof(*mp));
mtd->priv = mp;
mp->resource.module = mod_res;
/* Firmware's diagnostic NVRAM area. */
- diag_res = kmalloc(sizeof(*diag_res), GFP_KERNEL);
+ diag_res = kzalloc(sizeof(*diag_res), GFP_KERNEL);
if (!diag_res)
goto err_out_mp;
- memset(diag_res, 0, sizeof(*diag_res));
diag_res->name = ms02nv_res_diag_ram;
diag_res->start = addr;
diag_res->end = addr + MS02NV_RAM - 1;
mp->resource.diag_ram = diag_res;
/* User-available general-purpose NVRAM area. */
- user_res = kmalloc(sizeof(*user_res), GFP_KERNEL);
+ user_res = kzalloc(sizeof(*user_res), GFP_KERNEL);
if (!user_res)
goto err_out_diag_res;
- memset(user_res, 0, sizeof(*user_res));
user_res->name = ms02nv_res_user_ram;
user_res->start = addr + MS02NV_RAM;
user_res->end = addr + size - 1;
mp->resource.user_ram = user_res;
/* Control and status register. */
- csr_res = kmalloc(sizeof(*csr_res), GFP_KERNEL);
+ csr_res = kzalloc(sizeof(*csr_res), GFP_KERNEL);
if (!csr_res)
goto err_out_user_res;
- memset(csr_res, 0, sizeof(*csr_res));
csr_res->name = ms02nv_res_csr;
csr_res->start = addr + MS02NV_CSR;
csr_res->end = addr + MS02NV_CSR + 3;
device->writesize = pagesize;
device->owner = THIS_MODULE;
device->type = MTD_DATAFLASH;
- device->flags = MTD_CAP_NORFLASH;
+ device->flags = MTD_WRITEABLE;
device->erase = dataflash_erase;
device->read = dataflash_read;
device->write = dataflash_write;
if (status <= 0 || status == 0xff) {
DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
spi->dev.bus_id, status);
- if (status == 0xff)
+ if (status == 0 || status == 0xff)
status = -ENODEV;
return status;
}
struct phram_mtd_list *new;
int ret = -ENOMEM;
- new = kmalloc(sizeof(*new), GFP_KERNEL);
+ new = kzalloc(sizeof(*new), GFP_KERNEL);
if (!new)
goto out0;
- memset(new, 0, sizeof(*new));
-
ret = -EIO;
new->mtd.priv = ioremap(start, len);
if (!new->mtd.priv) {
E("slram: Cannot allocate new MTD device.\n");
return(-ENOMEM);
}
- (*curmtd)->mtdinfo = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ (*curmtd)->mtdinfo = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
(*curmtd)->next = NULL;
if ((*curmtd)->mtdinfo) {
- memset((char *)(*curmtd)->mtdinfo, 0, sizeof(struct mtd_info));
(*curmtd)->mtdinfo->priv =
- kmalloc(sizeof(slram_priv_t), GFP_KERNEL);
+ kzalloc(sizeof(slram_priv_t), GFP_KERNEL);
if (!(*curmtd)->mtdinfo->priv) {
kfree((*curmtd)->mtdinfo);
(*curmtd)->mtdinfo = NULL;
- } else {
- memset((*curmtd)->mtdinfo->priv,0,sizeof(slram_priv_t));
}
}
{
partition_t *partition;
- partition = kmalloc(sizeof(partition_t), GFP_KERNEL);
+ partition = kzalloc(sizeof(partition_t), GFP_KERNEL);
if (!partition) {
printk(KERN_WARNING "No memory to scan for FTL on %s\n",
return;
}
- memset(partition, 0, sizeof(partition_t));
-
partition->mbd.mtd = mtd;
if ((scan_header(partition) == 0) &&
le32_to_cpu(partition->header.FormattedSize) >> 10);
#endif
partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9;
- partition->mbd.blksize = SECTOR_SIZE;
+
partition->mbd.tr = tr;
partition->mbd.devnum = -1;
if (!add_mtd_blktrans_dev((void *)partition))
.name = "ftl",
.major = FTL_MAJOR,
.part_bits = PART_BITS,
+ .blksize = SECTOR_SIZE,
.readsect = ftl_readsect,
.writesect = ftl_writesect,
.getgeo = ftl_getgeo,
DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
- inftl = kmalloc(sizeof(*inftl), GFP_KERNEL);
+ inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
if (!inftl) {
printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
return;
}
- memset(inftl, 0, sizeof(*inftl));
inftl->mbd.mtd = mtd;
inftl->mbd.devnum = -1;
- inftl->mbd.blksize = 512;
+
inftl->mbd.tr = tr;
if (INFTL_mount(inftl) < 0) {
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- ops.len = len;
res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
- *retlen = ops.retlen;
+ *retlen = ops.oobretlen;
return res;
}
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- ops.len = len;
res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
- *retlen = ops.retlen;
+ *retlen = ops.oobretlen;
return res;
}
.name = "inftl",
.major = INFTL_MAJOR,
.part_bits = INFTL_PARTN_BITS,
+ .blksize = 512,
.getgeo = inftl_getgeo,
.readsect = inftl_readblock,
.writesect = inftl_writeblock,
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
+config MTD_PHYSMAP_OF
+ tristate "Flash device in physical memory map based on OF descirption"
+ depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ help
+ This provides a 'mapping' driver which allows the NOR Flash and
+ ROM driver code to communicate with chips which are mapped
+ physically into the CPU's memory. The mapping description here is
+ taken from OF device tree.
+
config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
depends on SPARC && MTD_CFI
BE VERY CAREFUL.
+config MTD_ESB2ROM
+ tristate "BIOS flash chip on Intel ESB Controller Hub 2"
+ depends on X86 && MTD_JEDECPROBE && PCI
+ help
+ Support for treating the BIOS flash chip on ESB2 motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_CK804XROM
+ tristate "BIOS flash chip on Nvidia CK804"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on nvidia motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
config MTD_SCB2_FLASH
tristate "BIOS flash chip on Intel SCB2 boards"
depends on X86 && MTD_JEDECPROBE
TQ Components TQM834x boards. If you have one of these boards
and would like to use the flash chips on it, say 'Y'.
-config MTD_CSTM_MIPS_IXX
- tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
- depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
- help
- This provides a mapping driver for the Integrated Technology
- Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
- Reference Board. It provides the necessary addressing, length,
- buswidth, vpp code and addition setup of the flash device for
- these boards. In addition, this mapping driver can be used for
- other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
- LEN/BUSWIDTH parameters. This mapping will provide one mtd device
- using one partition. The start address can be offset from the
- beginning of flash and the len can be less than the total flash
- device size to allow a window into the flash. Both CFI and JEDEC
- probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
- hex "Physical start address of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x8000000"
- help
- This is the physical memory location that the MTD driver will
- use for the flash chips on your particular target board.
- Refer to the memory map which should hopefully be in the
- documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
- hex "Physical length of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x4000000"
- help
- This is the total length that the MTD driver will use for the
- flash chips on your particular board. Refer to the memory
- map which should hopefully be in the documentation for your
- board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
- int "Bus width in octets"
- depends on MTD_CSTM_MIPS_IXX
- default "2"
- help
- This is the total bus width of the mapping of the flash chips
- on your particular board.
-
config MTD_OCELOT
tristate "Momenco Ocelot boot flash device"
depends on MIPS && MOMENCO_OCELOT
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_BAST) += bast-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
-obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
+obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o
obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o
+obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_LUBBOCK) += lubbock-flash.o
obj-$(CONFIG_MTD_MAINSTONE) += mainstone-flash.o
obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
+obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PNC2000) += pnc2000.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
};
+/* The 2 bits controlling the window size are often set to allow reading
+ * the BIOS, but too small to allow writing, since the lock registers are
+ * 4MiB lower in the address space than the data.
+ *
+ * This is intended to prevent flashing the bios, perhaps accidentally.
+ *
+ * This parameter allows the normal driver to over-ride the BIOS settings.
+ *
+ * The bits are 6 and 7. If both bits are set, it is a 5MiB window.
+ * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a
+ * 64KiB window.
+ *
+ */
+static uint win_size_bits;
+module_param(win_size_bits, uint, 0);
+MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x43 byte, normally set by BIOS.");
+
static struct amd76xrom_window amd76xrom_window = {
.maps = LIST_HEAD_INIT(amd76xrom_window.maps),
};
/* Remember the pci dev I find the window in - already have a ref */
window->pdev = pdev;
+ /* Enable the selected rom window. This is often incorrectly
+ * set up by the BIOS, and the 4MiB offset for the lock registers
+ * requires the full 5MiB of window space.
+ *
+ * This 'write, then read' approach leaves the bits for
+ * other uses of the hardware info.
+ */
+ pci_read_config_byte(pdev, 0x43, &byte);
+ pci_write_config_byte(pdev, 0x43, byte | win_size_bits );
+
/* Assume the rom window is properly setup, and find it's size */
pci_read_config_byte(pdev, 0x43, &byte);
if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) {
(unsigned long long)window->rsrc.end);
}
-#if 0
-
- /* Enable the selected rom window */
- pci_read_config_byte(pdev, 0x43, &byte);
- pci_write_config_byte(pdev, 0x43, byte | rwindow->segen_bits);
-#endif
/* Enable writes through the rom window */
pci_read_config_byte(pdev, 0x40, &byte);
info->map.phys = res->start;
info->map.size = res->end - res->start + 1;
- info->map.name = pdev->dev.bus_id;
+ info->map.name = pdev->dev.bus_id;
info->map.bankwidth = 2;
if (info->map.size > AREA_MAXSIZE)
/*
* Allocate the map_info structs in one go.
*/
- maps = kmalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
+ maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
if (!maps)
return -ENOMEM;
- memset(maps, 0, sizeof(struct map_info) * nr);
/*
* Claim and then map the memory regions.
*/
--- /dev/null
+/*
+ * ck804xrom.c
+ *
+ * Normal mappings of chips in physical memory
+ *
+ * Dave Olsen <dolsen@lnxi.com>
+ * Ryan Jackson <rjackson@lnxi.com>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+
+#define MOD_NAME KBUILD_BASENAME
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024)
+
+struct ck804xrom_window {
+ void __iomem *virt;
+ unsigned long phys;
+ unsigned long size;
+ struct list_head maps;
+ struct resource rsrc;
+ struct pci_dev *pdev;
+};
+
+struct ck804xrom_map_info {
+ struct list_head list;
+ struct map_info map;
+ struct mtd_info *mtd;
+ struct resource rsrc;
+ char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+
+/* The 2 bits controlling the window size are often set to allow reading
+ * the BIOS, but too small to allow writing, since the lock registers are
+ * 4MiB lower in the address space than the data.
+ *
+ * This is intended to prevent flashing the bios, perhaps accidentally.
+ *
+ * This parameter allows the normal driver to override the BIOS settings.
+ *
+ * The bits are 6 and 7. If both bits are set, it is a 5MiB window.
+ * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a
+ * 64KiB window.
+ *
+ */
+static uint win_size_bits = 0;
+module_param(win_size_bits, uint, 0);
+MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x88 byte, normally set by BIOS.");
+
+static struct ck804xrom_window ck804xrom_window = {
+ .maps = LIST_HEAD_INIT(ck804xrom_window.maps),
+};
+
+static void ck804xrom_cleanup(struct ck804xrom_window *window)
+{
+ struct ck804xrom_map_info *map, *scratch;
+ u8 byte;
+
+ if (window->pdev) {
+ /* Disable writes through the rom window */
+ pci_read_config_byte(window->pdev, 0x6d, &byte);
+ pci_write_config_byte(window->pdev, 0x6d, byte & ~1);
+ }
+
+ /* Free all of the mtd devices */
+ list_for_each_entry_safe(map, scratch, &window->maps, list) {
+ if (map->rsrc.parent)
+ release_resource(&map->rsrc);
+
+ del_mtd_device(map->mtd);
+ map_destroy(map->mtd);
+ list_del(&map->list);
+ kfree(map);
+ }
+ if (window->rsrc.parent)
+ release_resource(&window->rsrc);
+
+ if (window->virt) {
+ iounmap(window->virt);
+ window->virt = NULL;
+ window->phys = 0;
+ window->size = 0;
+ }
+ pci_dev_put(window->pdev);
+}
+
+
+static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+ u8 byte;
+ struct ck804xrom_window *window = &ck804xrom_window;
+ struct ck804xrom_map_info *map = NULL;
+ unsigned long map_top;
+
+ /* Remember the pci dev I find the window in */
+ window->pdev = pci_dev_get(pdev);
+
+ /* Enable the selected rom window. This is often incorrectly
+ * set up by the BIOS, and the 4MiB offset for the lock registers
+ * requires the full 5MiB of window space.
+ *
+ * This 'write, then read' approach leaves the bits for
+ * other uses of the hardware info.
+ */
+ pci_read_config_byte(pdev, 0x88, &byte);
+ pci_write_config_byte(pdev, 0x88, byte | win_size_bits );
+
+
+ /* Assume the rom window is properly setup, and find it's size */
+ pci_read_config_byte(pdev, 0x88, &byte);
+
+ if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6)))
+ window->phys = 0xffb00000; /* 5MiB */
+ else if ((byte & (1<<7)) == (1<<7))
+ window->phys = 0xffc00000; /* 4MiB */
+ else
+ window->phys = 0xffff0000; /* 64KiB */
+
+ window->size = 0xffffffffUL - window->phys + 1UL;
+
+ /*
+ * Try to reserve the window mem region. If this fails then
+ * it is likely due to a fragment of the window being
+ * "reserved" by the BIOS. In the case that the
+ * request_mem_region() fails then once the rom size is
+ * discovered we will try to reserve the unreserved fragment.
+ */
+ window->rsrc.name = MOD_NAME;
+ window->rsrc.start = window->phys;
+ window->rsrc.end = window->phys + window->size - 1;
+ window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &window->rsrc)) {
+ window->rsrc.parent = NULL;
+ printk(KERN_ERR MOD_NAME
+ " %s(): Unable to register resource"
+ " 0x%.016llx-0x%.016llx - kernel bug?\n",
+ __func__,
+ (unsigned long long)window->rsrc.start,
+ (unsigned long long)window->rsrc.end);
+ }
+
+
+ /* Enable writes through the rom window */
+ pci_read_config_byte(pdev, 0x6d, &byte);
+ pci_write_config_byte(pdev, 0x6d, byte | 1);
+
+ /* FIXME handle registers 0x80 - 0x8C the bios region locks */
+
+ /* For write accesses caches are useless */
+ window->virt = ioremap_nocache(window->phys, window->size);
+ if (!window->virt) {
+ printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ window->phys, window->size);
+ goto out;
+ }
+
+ /* Get the first address to look for a rom chip at */
+ map_top = window->phys;
+#if 1
+ /* The probe sequence run over the firmware hub lock
+ * registers sets them to 0x7 (no access).
+ * Probe at most the last 4MiB of the address space.
+ */
+ if (map_top < 0xffc00000)
+ map_top = 0xffc00000;
+#endif
+ /* Loop through and look for rom chips. Since we don't know the
+ * starting address for each chip, probe every ROM_PROBE_STEP_SIZE
+ * bytes from the starting address of the window.
+ */
+ while((map_top - 1) < 0xffffffffUL) {
+ struct cfi_private *cfi;
+ unsigned long offset;
+ int i;
+
+ if (!map)
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+
+ if (!map) {
+ printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ goto out;
+ }
+ memset(map, 0, sizeof(*map));
+ INIT_LIST_HEAD(&map->list);
+ map->map.name = map->map_name;
+ map->map.phys = map_top;
+ offset = map_top - window->phys;
+ map->map.virt = (void __iomem *)
+ (((unsigned long)(window->virt)) + offset);
+ map->map.size = 0xffffffffUL - map_top + 1UL;
+ /* Set the name of the map to the address I am trying */
+ sprintf(map->map_name, "%s @%08lx",
+ MOD_NAME, map->map.phys);
+
+ /* There is no generic VPP support */
+ for(map->map.bankwidth = 32; map->map.bankwidth;
+ map->map.bankwidth >>= 1)
+ {
+ char **probe_type;
+ /* Skip bankwidths that are not supported */
+ if (!map_bankwidth_supported(map->map.bankwidth))
+ continue;
+
+ /* Setup the map methods */
+ simple_map_init(&map->map);
+
+ /* Try all of the probe methods */
+ probe_type = rom_probe_types;
+ for(; *probe_type; probe_type++) {
+ map->mtd = do_map_probe(*probe_type, &map->map);
+ if (map->mtd)
+ goto found;
+ }
+ }
+ map_top += ROM_PROBE_STEP_SIZE;
+ continue;
+ found:
+ /* Trim the size if we are larger than the map */
+ if (map->mtd->size > map->map.size) {
+ printk(KERN_WARNING MOD_NAME
+ " rom(%u) larger than window(%lu). fixing...\n",
+ map->mtd->size, map->map.size);
+ map->mtd->size = map->map.size;
+ }
+ if (window->rsrc.parent) {
+ /*
+ * Registering the MTD device in iomem may not be possible
+ * if there is a BIOS "reserved" and BUSY range. If this
+ * fails then continue anyway.
+ */
+ map->rsrc.name = map->map_name;
+ map->rsrc.start = map->map.phys;
+ map->rsrc.end = map->map.phys + map->mtd->size - 1;
+ map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&window->rsrc, &map->rsrc)) {
+ printk(KERN_ERR MOD_NAME
+ ": cannot reserve MTD resource\n");
+ map->rsrc.parent = NULL;
+ }
+ }
+
+ /* Make the whole region visible in the map */
+ map->map.virt = window->virt;
+ map->map.phys = window->phys;
+ cfi = map->map.fldrv_priv;
+ for(i = 0; i < cfi->numchips; i++)
+ cfi->chips[i].start += offset;
+
+ /* Now that the mtd devices is complete claim and export it */
+ map->mtd->owner = THIS_MODULE;
+ if (add_mtd_device(map->mtd)) {
+ map_destroy(map->mtd);
+ map->mtd = NULL;
+ goto out;
+ }
+
+
+ /* Calculate the new value of map_top */
+ map_top += map->mtd->size;
+
+ /* File away the map structure */
+ list_add(&map->list, &window->maps);
+ map = NULL;
+ }
+
+ out:
+ /* Free any left over map structures */
+ if (map)
+ kfree(map);
+
+ /* See if I have any map structures */
+ if (list_empty(&window->maps)) {
+ ck804xrom_cleanup(window);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+
+static void __devexit ck804xrom_remove_one (struct pci_dev *pdev)
+{
+ struct ck804xrom_window *window = &ck804xrom_window;
+
+ ck804xrom_cleanup(window);
+}
+
+static struct pci_device_id ck804xrom_pci_tbl[] = {
+ { PCI_VENDOR_ID_NVIDIA, 0x0051,
+ PCI_ANY_ID, PCI_ANY_ID, }, /* nvidia ck804 */
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
+
+#if 0
+static struct pci_driver ck804xrom_driver = {
+ .name = MOD_NAME,
+ .id_table = ck804xrom_pci_tbl,
+ .probe = ck804xrom_init_one,
+ .remove = ck804xrom_remove_one,
+};
+#endif
+
+static int __init init_ck804xrom(void)
+{
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int retVal;
+ pdev = NULL;
+
+ for(id = ck804xrom_pci_tbl; id->vendor; id++) {
+ pdev = pci_find_device(id->vendor, id->device, NULL);
+ if (pdev)
+ break;
+ }
+ if (pdev) {
+ retVal = ck804xrom_init_one(pdev, &ck804xrom_pci_tbl[0]);
+ pci_dev_put(pdev);
+ return retVal;
+ }
+ return -ENXIO;
+#if 0
+ return pci_module_init(&ck804xrom_driver);
+#endif
+}
+
+static void __exit cleanup_ck804xrom(void)
+{
+ ck804xrom_remove_one(ck804xrom_window.pdev);
+}
+
+module_init(init_ck804xrom);
+module_exit(cleanup_ck804xrom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>, Dave Olsen <dolsen@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the Nvidia ck804 southbridge");
+
+++ /dev/null
-/*
- * $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
- * Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
- * Config with both CFI and JEDEC device support.
- *
- * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
- *
- * Copyright 2000 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-#define CC_GCR 0xB4013818
-#define CC_GPBCR 0xB401380A
-#define CC_GPBDR 0xB4013808
-#define CC_M68K_DEVICE 1
-#define CC_M68K_FUNCTION 6
-#define CC_CONFADDR 0xB8004000
-#define CC_CONFDATA 0xB8004004
-#define CC_FC_FCR 0xB8002004
-#define CC_FC_DCR 0xB8002008
-#define CC_GPACR 0xB4013802
-#define CC_GPAICR 0xB4013804
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-void cstm_mips_ixx_set_vpp(struct map_info *map,int vpp)
-{
- static DEFINE_SPINLOCK(vpp_lock);
- static int vpp_count = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&vpp_lock, flags);
-
- if (vpp) {
- if (!vpp_count++) {
- __u16 data;
- __u8 data1;
- static u8 first = 1;
-
- // Set GPIO port B pin3 to high
- data = *(__u16 *)(CC_GPBCR);
- data = (data & 0xff0f) | 0x0040;
- *(__u16 *)CC_GPBCR = data;
- *(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) | 0x08;
- if (first) {
- first = 0;
- /* need to have this delay for first
- enabling vpp after powerup */
- udelay(40);
- }
- }
- } else {
- if (!--vpp_count) {
- __u16 data;
-
- // Set GPIO port B pin3 to high
- data = *(__u16 *)(CC_GPBCR);
- data = (data & 0xff3f) | 0x0040;
- *(__u16 *)CC_GPBCR = data;
- *(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) & 0xf7;
- }
- }
- spin_unlock_irqrestore(&vpp_lock, flags);
-}
-#endif
-
-/* board and partition description */
-
-#define MAX_PHYSMAP_PARTITIONS 8
-struct cstm_mips_ixx_info {
- char *name;
- unsigned long window_addr;
- unsigned long window_size;
- int bankwidth;
- int num_partitions;
-};
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
-{
- { // 28F128J3A in 2x16 configuration
- "big flash", // name
- 0x08000000, // window_addr
- 0x02000000, // window_size
- 4, // bankwidth
- 1, // num_partitions
- }
-
-};
-static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{ // 28F128J3A in 2x16 configuration
- {
- .name = "main partition ",
- .size = 0x02000000, // 128 x 2 x 128k byte sectors
- .offset = 0,
- },
-},
-};
-#else /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
-{
- {
- "MTD flash", // name
- CONFIG_MTD_CSTM_MIPS_IXX_START, // window_addr
- CONFIG_MTD_CSTM_MIPS_IXX_LEN, // window_size
- CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH, // bankwidth
- 1, // num_partitions
- },
-
-};
-static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{
- {
- .name = "main partition",
- .size = CONFIG_MTD_CSTM_MIPS_IXX_LEN,
- .offset = 0,
- },
-},
-};
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER];
-
-int __init init_cstm_mips_ixx(void)
-{
- int i;
- int jedec;
- struct mtd_info *mymtd;
- struct mtd_partition *parts;
-
- /* Initialize mapping */
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
- cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
-
-
- cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
- cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
- if (!cstm_mips_ixx_map[i].virt) {
- int j = 0;
- printk(KERN_WARNING "Failed to ioremap\n");
- for (j = 0; j < i; j++) {
- if (cstm_mips_ixx_map[j].virt) {
- iounmap(cstm_mips_ixx_map[j].virt);
- cstm_mips_ixx_map[j].virt = NULL;
- }
- }
- return -EIO;
- }
- cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
- cstm_mips_ixx_map[i].size = cstm_mips_ixx_board_desc[i].window_size;
- cstm_mips_ixx_map[i].bankwidth = cstm_mips_ixx_board_desc[i].bankwidth;
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
- cstm_mips_ixx_map[i].set_vpp = cstm_mips_ixx_set_vpp;
-#endif
- simple_map_init(&cstm_mips_ixx_map[i]);
- //printk(KERN_NOTICE "cstm_mips_ixx: ioremap is %x\n",(unsigned int)(cstm_mips_ixx_map[i].virt));
- }
-
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
- setup_ITE_IVR_flash();
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- parts = &cstm_mips_ixx_partitions[i][0];
- jedec = 0;
- mymtd = (struct mtd_info *)do_map_probe("cfi_probe", &cstm_mips_ixx_map[i]);
- //printk(KERN_NOTICE "phymap %d cfi_probe: mymtd is %x\n",i,(unsigned int)mymtd);
- if (!mymtd) {
- jedec = 1;
- mymtd = (struct mtd_info *)do_map_probe("jedec", &cstm_mips_ixx_map[i]);
- printk(KERN_NOTICE "cstm_mips_ixx %d jedec: mymtd is %x\n",i,(unsigned int)mymtd);
- }
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
-
- cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
- add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
- }
- else {
- for (i = 0; i < PHYSMAP_NUMBER; i++) {
- if (cstm_mips_ixx_map[i].virt) {
- iounmap(cstm_mips_ixx_map[i].virt);
- cstm_mips_ixx_map[i].virt = NULL;
- }
- }
- return -ENXIO;
- }
- }
- return 0;
-}
-
-static void __exit cleanup_cstm_mips_ixx(void)
-{
- int i;
- struct mtd_info *mymtd;
-
- for (i=0;i<PHYSMAP_NUMBER;i++) {
- mymtd = (struct mtd_info *)cstm_mips_ixx_map[i].map_priv_2;
- if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
- }
- if (cstm_mips_ixx_map[i].virt) {
- iounmap((void *)cstm_mips_ixx_map[i].virt);
- cstm_mips_ixx_map[i].virt = 0;
- }
- }
-}
-#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-void PCISetULongByOffset(__u32 DevNumber, __u32 FuncNumber, __u32 Offset, __u32 data)
-{
- __u32 offset;
-
- offset = ( unsigned long )( 0x80000000 | ( DevNumber << 11 ) + ( FuncNumber << 8 ) + Offset) ;
-
- *(__u32 *)CC_CONFADDR = offset;
- *(__u32 *)CC_CONFDATA = data;
-}
-void setup_ITE_IVR_flash()
-{
- __u32 size, base;
-
- size = 0x0e000000; // 32MiB
- base = (0x08000000) >> 8 >>1; // Bug: we must shift one more bit
-
- /* need to set ITE flash to 32 bits instead of default 8 */
-#ifdef CONFIG_MIPS_IVR
- *(__u32 *)CC_FC_FCR = 0x55;
- *(__u32 *)CC_GPACR = 0xfffc;
-#else
- *(__u32 *)CC_FC_FCR = 0x77;
-#endif
- /* turn bursting off */
- *(__u32 *)CC_FC_DCR = 0x0;
-
- /* setup for one chip 4 byte PCI access */
- PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x60, size | base);
- PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x64, 0x02);
-}
-#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-
-module_init(init_cstm_mips_ixx);
-module_exit(cleanup_cstm_mips_ixx);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for ITE 8172G and Globespan IVR boards");
--- /dev/null
+/*
+ * esb2rom.c
+ *
+ * Normal mappings of flash chips in physical memory
+ * through the Intel ESB2 Southbridge.
+ *
+ * This was derived from ichxrom.c in May 2006 by
+ * Lew Glendenning <lglendenning@lnxi.com>
+ *
+ * Eric Biederman, of course, was a major help in this effort.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+#define MOD_NAME KBUILD_BASENAME
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
+
+#define BIOS_CNTL 0xDC
+#define BIOS_LOCK_ENABLE 0x02
+#define BIOS_WRITE_ENABLE 0x01
+
+/* This became a 16-bit register, and EN2 has disappeared */
+#define FWH_DEC_EN1 0xD8
+#define FWH_F8_EN 0x8000
+#define FWH_F0_EN 0x4000
+#define FWH_E8_EN 0x2000
+#define FWH_E0_EN 0x1000
+#define FWH_D8_EN 0x0800
+#define FWH_D0_EN 0x0400
+#define FWH_C8_EN 0x0200
+#define FWH_C0_EN 0x0100
+#define FWH_LEGACY_F_EN 0x0080
+#define FWH_LEGACY_E_EN 0x0040
+/* reserved 0x0020 and 0x0010 */
+#define FWH_70_EN 0x0008
+#define FWH_60_EN 0x0004
+#define FWH_50_EN 0x0002
+#define FWH_40_EN 0x0001
+
+/* these are 32-bit values */
+#define FWH_SEL1 0xD0
+#define FWH_SEL2 0xD4
+
+#define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN)
+
+#define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN)
+
+#define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN)
+
+#define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN)
+
+#define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN)
+
+#define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN)
+
+#define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN)
+
+#define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN)
+
+#define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN)
+
+#define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN)
+
+#define FWH_1MiB (FWH_F8_EN | FWH_F0_EN)
+
+#define FWH_0_5MiB (FWH_F8_EN)
+
+
+struct esb2rom_window {
+ void __iomem* virt;
+ unsigned long phys;
+ unsigned long size;
+ struct list_head maps;
+ struct resource rsrc;
+ struct pci_dev *pdev;
+};
+
+struct esb2rom_map_info {
+ struct list_head list;
+ struct map_info map;
+ struct mtd_info *mtd;
+ struct resource rsrc;
+ char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+static struct esb2rom_window esb2rom_window = {
+ .maps = LIST_HEAD_INIT(esb2rom_window.maps),
+};
+
+static void esb2rom_cleanup(struct esb2rom_window *window)
+{
+ struct esb2rom_map_info *map, *scratch;
+ u8 byte;
+
+ /* Disable writes through the rom window */
+ pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
+ pci_write_config_byte(window->pdev, BIOS_CNTL,
+ byte & ~BIOS_WRITE_ENABLE);
+
+ /* Free all of the mtd devices */
+ list_for_each_entry_safe(map, scratch, &window->maps, list) {
+ if (map->rsrc.parent)
+ release_resource(&map->rsrc);
+ del_mtd_device(map->mtd);
+ map_destroy(map->mtd);
+ list_del(&map->list);
+ kfree(map);
+ }
+ if (window->rsrc.parent)
+ release_resource(&window->rsrc);
+ if (window->virt) {
+ iounmap(window->virt);
+ window->virt = NULL;
+ window->phys = 0;
+ window->size = 0;
+ }
+ pci_dev_put(window->pdev);
+}
+
+static int __devinit esb2rom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+ struct esb2rom_window *window = &esb2rom_window;
+ struct esb2rom_map_info *map = NULL;
+ unsigned long map_top;
+ u8 byte;
+ u16 word;
+
+ /* For now I just handle the ecb2 and I assume there
+ * are not a lot of resources up at the top of the address
+ * space. It is possible to handle other devices in the
+ * top 16MiB but it is very painful. Also since
+ * you can only really attach a FWH to an ICHX there
+ * a number of simplifications you can make.
+ *
+ * Also you can page firmware hubs if an 8MiB window isn't enough
+ * but don't currently handle that case either.
+ */
+ window->pdev = pci_dev_get(pdev);
+
+ /* RLG: experiment 2. Force the window registers to the widest values */
+
+/*
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
+ pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
+ pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
+
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
+ pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
+*/
+
+ /* Find a region continuous to the end of the ROM window */
+ window->phys = 0;
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "pci_read_config_byte : %x\n", word);
+
+ if ((word & FWH_8MiB) == FWH_8MiB)
+ window->phys = 0xff400000;
+ else if ((word & FWH_7MiB) == FWH_7MiB)
+ window->phys = 0xff500000;
+ else if ((word & FWH_6MiB) == FWH_6MiB)
+ window->phys = 0xff600000;
+ else if ((word & FWH_5MiB) == FWH_5MiB)
+ window->phys = 0xFF700000;
+ else if ((word & FWH_4MiB) == FWH_4MiB)
+ window->phys = 0xffc00000;
+ else if ((word & FWH_3_5MiB) == FWH_3_5MiB)
+ window->phys = 0xffc80000;
+ else if ((word & FWH_3MiB) == FWH_3MiB)
+ window->phys = 0xffd00000;
+ else if ((word & FWH_2_5MiB) == FWH_2_5MiB)
+ window->phys = 0xffd80000;
+ else if ((word & FWH_2MiB) == FWH_2MiB)
+ window->phys = 0xffe00000;
+ else if ((word & FWH_1_5MiB) == FWH_1_5MiB)
+ window->phys = 0xffe80000;
+ else if ((word & FWH_1MiB) == FWH_1MiB)
+ window->phys = 0xfff00000;
+ else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
+ window->phys = 0xfff80000;
+
+ /* reserved 0x0020 and 0x0010 */
+ window->phys -= 0x400000UL;
+ window->size = (0xffffffffUL - window->phys) + 1UL;
+
+ /* Enable writes through the rom window */
+ pci_read_config_byte(pdev, BIOS_CNTL, &byte);
+ if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) {
+ /* The BIOS will generate an error if I enable
+ * this device, so don't even try.
+ */
+ printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
+ goto out;
+ }
+ pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
+
+ /*
+ * Try to reserve the window mem region. If this fails then
+ * it is likely due to the window being "reseved" by the BIOS.
+ */
+ window->rsrc.name = MOD_NAME;
+ window->rsrc.start = window->phys;
+ window->rsrc.end = window->phys + window->size - 1;
+ window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &window->rsrc)) {
+ window->rsrc.parent = NULL;
+ printk(KERN_DEBUG MOD_NAME
+ ": %s(): Unable to register resource"
+ " 0x%.08llx-0x%.08llx - kernel bug?\n",
+ __func__,
+ (unsigned long long)window->rsrc.start,
+ (unsigned long long)window->rsrc.end);
+ }
+
+ /* Map the firmware hub into my address space. */
+ window->virt = ioremap_nocache(window->phys, window->size);
+ if (!window->virt) {
+ printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ window->phys, window->size);
+ goto out;
+ }
+
+ /* Get the first address to look for an rom chip at */
+ map_top = window->phys;
+ if ((window->phys & 0x3fffff) != 0) {
+ /* if not aligned on 4MiB, look 4MiB lower in address space */
+ map_top = window->phys + 0x400000;
+ }
+#if 1
+ /* The probe sequence run over the firmware hub lock
+ * registers sets them to 0x7 (no access).
+ * (Insane hardware design, but most copied Intel's.)
+ * ==> Probe at most the last 4M of the address space.
+ */
+ if (map_top < 0xffc00000)
+ map_top = 0xffc00000;
+#endif
+ /* Loop through and look for rom chips */
+ while ((map_top - 1) < 0xffffffffUL) {
+ struct cfi_private *cfi;
+ unsigned long offset;
+ int i;
+
+ if (!map)
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+ if (!map) {
+ printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ goto out;
+ }
+ memset(map, 0, sizeof(*map));
+ INIT_LIST_HEAD(&map->list);
+ map->map.name = map->map_name;
+ map->map.phys = map_top;
+ offset = map_top - window->phys;
+ map->map.virt = (void __iomem *)
+ (((unsigned long)(window->virt)) + offset);
+ map->map.size = 0xffffffffUL - map_top + 1UL;
+ /* Set the name of the map to the address I am trying */
+ sprintf(map->map_name, "%s @%08lx",
+ MOD_NAME, map->map.phys);
+
+ /* Firmware hubs only use vpp when being programmed
+ * in a factory setting. So in-place programming
+ * needs to use a different method.
+ */
+ for(map->map.bankwidth = 32; map->map.bankwidth;
+ map->map.bankwidth >>= 1) {
+ char **probe_type;
+ /* Skip bankwidths that are not supported */
+ if (!map_bankwidth_supported(map->map.bankwidth))
+ continue;
+
+ /* Setup the map methods */
+ simple_map_init(&map->map);
+
+ /* Try all of the probe methods */
+ probe_type = rom_probe_types;
+ for(; *probe_type; probe_type++) {
+ map->mtd = do_map_probe(*probe_type, &map->map);
+ if (map->mtd)
+ goto found;
+ }
+ }
+ map_top += ROM_PROBE_STEP_SIZE;
+ continue;
+ found:
+ /* Trim the size if we are larger than the map */
+ if (map->mtd->size > map->map.size) {
+ printk(KERN_WARNING MOD_NAME
+ " rom(%u) larger than window(%lu). fixing...\n",
+ map->mtd->size, map->map.size);
+ map->mtd->size = map->map.size;
+ }
+ if (window->rsrc.parent) {
+ /*
+ * Registering the MTD device in iomem may not be possible
+ * if there is a BIOS "reserved" and BUSY range. If this
+ * fails then continue anyway.
+ */
+ map->rsrc.name = map->map_name;
+ map->rsrc.start = map->map.phys;
+ map->rsrc.end = map->map.phys + map->mtd->size - 1;
+ map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&window->rsrc, &map->rsrc)) {
+ printk(KERN_ERR MOD_NAME
+ ": cannot reserve MTD resource\n");
+ map->rsrc.parent = NULL;
+ }
+ }
+
+ /* Make the whole region visible in the map */
+ map->map.virt = window->virt;
+ map->map.phys = window->phys;
+ cfi = map->map.fldrv_priv;
+ for(i = 0; i < cfi->numchips; i++)
+ cfi->chips[i].start += offset;
+
+ /* Now that the mtd devices is complete claim and export it */
+ map->mtd->owner = THIS_MODULE;
+ if (add_mtd_device(map->mtd)) {
+ map_destroy(map->mtd);
+ map->mtd = NULL;
+ goto out;
+ }
+
+ /* Calculate the new value of map_top */
+ map_top += map->mtd->size;
+
+ /* File away the map structure */
+ list_add(&map->list, &window->maps);
+ map = NULL;
+ }
+
+ out:
+ /* Free any left over map structures */
+ kfree(map);
+
+ /* See if I have any map structures */
+ if (list_empty(&window->maps)) {
+ esb2rom_cleanup(window);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+{
+ struct esb2rom_window *window = &esb2rom_window;
+ esb2rom_cleanup(window);
+}
+
+static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, },
+};
+
+#if 0
+MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
+
+static struct pci_driver esb2rom_driver = {
+ .name = MOD_NAME,
+ .id_table = esb2rom_pci_tbl,
+ .probe = esb2rom_init_one,
+ .remove = esb2rom_remove_one,
+};
+#endif
+
+static int __init init_esb2rom(void)
+{
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int retVal;
+
+ pdev = NULL;
+ for (id = esb2rom_pci_tbl; id->vendor; id++) {
+ printk(KERN_DEBUG "device id = %x\n", id->device);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
+ if (pdev) {
+ printk(KERN_DEBUG "matched device = %x\n", id->device);
+ break;
+ }
+ }
+ if (pdev) {
+ printk(KERN_DEBUG "matched device id %x\n", id->device);
+ retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
+ pci_dev_put(pdev);
+ printk(KERN_DEBUG "retVal = %d\n", retVal);
+ return retVal;
+ }
+ return -ENXIO;
+#if 0
+ return pci_register_driver(&esb2rom_driver);
+#endif
+}
+
+static void __exit cleanup_esb2rom(void)
+{
+ esb2rom_remove_one(esb2rom_window.pdev);
+}
+
+module_init(init_esb2rom);
+module_exit(cleanup_esb2rom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");
int err;
void __iomem *base;
- info = kmalloc(sizeof(struct armflash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct armflash_info), GFP_KERNEL);
if (!info) {
err = -ENOMEM;
goto out;
}
- memset(info, 0, sizeof(struct armflash_info));
-
info->plat = plat;
if (plat && plat->init) {
err = plat->init();
#include <linux/mtd/partitions.h>
#include <linux/mtd/cfi.h>
#include <linux/reboot.h>
+#include <linux/err.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <asm/io.h>
init_waitqueue_head(&wait_q);
mtd = get_mtd_device(NULL, 2);
- if (mtd) {
+ if (!IS_ERR(mtd)) {
nettel_erase.mtd = mtd;
nettel_erase.callback = nettel_erasecallback;
nettel_erase.callback = NULL;
iounmap(nettel_amd_map.virt);
return(rc);
-
+
}
/****************************************************************************/
struct resource *res = pdev->resource;
unsigned long size = res->end - res->start + 1;
- info = kmalloc(sizeof(struct omapflash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct omapflash_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
- memset(info, 0, sizeof(struct omapflash_info));
-
if (!request_mem_region(res->start, size, "flash")) {
err = -EBUSY;
goto out_free_info;
struct pcmciamtd_dev *dev;
/* Create new memory card device */
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) return -ENOMEM;
DEBUG(1, "dev=0x%p", dev);
- memset(dev, 0, sizeof(*dev));
dev->p_dev = link;
link->priv = dev;
return -ENODEV;
printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
- (unsigned long long)dev->resource->end - dev->resource->start + 1,
+ (unsigned long long)(dev->resource->end - dev->resource->start + 1),
(unsigned long long)dev->resource->start);
- info = kmalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
if (info == NULL) {
err = -ENOMEM;
goto err_out;
}
- memset(info, 0, sizeof(*info));
platform_set_drvdata(dev, info);
--- /dev/null
+/*
+ * Normal mappings of chips in physical memory for OF devices
+ *
+ * Copyright (C) 2006 MontaVista Software Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+
+struct physmap_flash_info {
+ struct mtd_info *mtd;
+ struct map_info map;
+ struct resource *res;
+#ifdef CONFIG_MTD_PARTITIONS
+ int nr_parts;
+ struct mtd_partition *parts;
+#endif
+};
+
+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int parse_flash_partitions(struct device_node *node,
+ struct mtd_partition **parts)
+{
+ int i, plen, retval = -ENOMEM;
+ const u32 *part;
+ const char *name;
+
+ part = get_property(node, "partitions", &plen);
+ if (part == NULL)
+ goto err;
+
+ retval = plen / (2 * sizeof(u32));
+ *parts = kzalloc(retval * sizeof(struct mtd_partition), GFP_KERNEL);
+ if (*parts == NULL) {
+ printk(KERN_ERR "Can't allocate the flash partition data!\n");
+ goto err;
+ }
+
+ name = get_property(node, "partition-names", &plen);
+
+ for (i = 0; i < retval; i++) {
+ (*parts)[i].offset = *part++;
+ (*parts)[i].size = *part & ~1;
+ if (*part++ & 1) /* bit 0 set signifies read only partition */
+ (*parts)[i].mask_flags = MTD_WRITEABLE;
+
+ if (name != NULL && plen > 0) {
+ int len = strlen(name) + 1;
+
+ (*parts)[i].name = (char *)name;
+ plen -= len;
+ name += len;
+ } else
+ (*parts)[i].name = "unnamed";
+ }
+err:
+ return retval;
+}
+#endif
+
+static int of_physmap_remove(struct of_device *dev)
+{
+ struct physmap_flash_info *info;
+
+ info = dev_get_drvdata(&dev->dev);
+ if (info == NULL)
+ return 0;
+ dev_set_drvdata(&dev->dev, NULL);
+
+ if (info->mtd != NULL) {
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts) {
+ del_mtd_partitions(info->mtd);
+ kfree(info->parts);
+ } else {
+ del_mtd_device(info->mtd);
+ }
+#else
+ del_mtd_device(info->mtd);
+#endif
+ map_destroy(info->mtd);
+ }
+
+ if (info->map.virt != NULL)
+ iounmap(info->map.virt);
+
+ if (info->res != NULL) {
+ release_resource(info->res);
+ kfree(info->res);
+ }
+
+ return 0;
+}
+
+static int __devinit of_physmap_probe(struct of_device *dev, const struct of_device_id *match)
+{
+ struct device_node *dp = dev->node;
+ struct resource res;
+ struct physmap_flash_info *info;
+ const char **probe_type;
+ const char *of_probe;
+ const u32 *width;
+ int err;
+
+
+ if (of_address_to_resource(dp, 0, &res)) {
+ dev_err(&dev->dev, "Can't get the flash mapping!\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ dev_dbg(&dev->dev, "physmap flash device: %.8llx at %.8llx\n",
+ (unsigned long long)res.end - res.start + 1,
+ (unsigned long long)res.start);
+
+ info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ memset(info, 0, sizeof(*info));
+
+ dev_set_drvdata(&dev->dev, info);
+
+ info->res = request_mem_region(res.start, res.end - res.start + 1,
+ dev->dev.bus_id);
+ if (info->res == NULL) {
+ dev_err(&dev->dev, "Could not reserve memory region\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ width = get_property(dp, "bank-width", NULL);
+ if (width == NULL) {
+ dev_err(&dev->dev, "Can't get the flash bank width!\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ info->map.name = dev->dev.bus_id;
+ info->map.phys = res.start;
+ info->map.size = res.end - res.start + 1;
+ info->map.bankwidth = *width;
+
+ info->map.virt = ioremap(info->map.phys, info->map.size);
+ if (info->map.virt == NULL) {
+ dev_err(&dev->dev, "Failed to ioremap flash region\n");
+ err = EIO;
+ goto err_out;
+ }
+
+ simple_map_init(&info->map);
+
+ of_probe = get_property(dp, "probe-type", NULL);
+ if (of_probe == NULL) {
+ probe_type = rom_probe_types;
+ for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
+ info->mtd = do_map_probe(*probe_type, &info->map);
+ } else if (!strcmp(of_probe, "CFI"))
+ info->mtd = do_map_probe("cfi_probe", &info->map);
+ else if (!strcmp(of_probe, "JEDEC"))
+ info->mtd = do_map_probe("jedec_probe", &info->map);
+ else {
+ if (strcmp(of_probe, "ROM"))
+ dev_dbg(&dev->dev, "map_probe: don't know probe type "
+ "'%s', mapping as rom\n");
+ info->mtd = do_map_probe("mtd_rom", &info->map);
+ }
+ if (info->mtd == NULL) {
+ dev_err(&dev->dev, "map_probe failed\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+ info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0);
+ if (err > 0) {
+ add_mtd_partitions(info->mtd, info->parts, err);
+ } else if ((err = parse_flash_partitions(dp, &info->parts)) > 0) {
+ dev_info(&dev->dev, "Using OF partition information\n");
+ add_mtd_partitions(info->mtd, info->parts, err);
+ info->nr_parts = err;
+ } else
+#endif
+
+ add_mtd_device(info->mtd);
+ return 0;
+
+err_out:
+ of_physmap_remove(dev);
+ return err;
+
+ return 0;
+
+
+}
+
+static struct of_device_id of_physmap_match[] = {
+ {
+ .type = "rom",
+ .compatible = "direct-mapped"
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_physmap_match);
+
+
+static struct of_platform_driver of_physmap_flash_driver = {
+ .name = "physmap-flash",
+ .match_table = of_physmap_match,
+ .probe = of_physmap_probe,
+ .remove = of_physmap_remove,
+};
+
+static int __init of_physmap_init(void)
+{
+ return of_register_platform_driver(&of_physmap_flash_driver);
+}
+
+static void __exit of_physmap_exit(void)
+{
+ of_unregister_platform_driver(&of_physmap_flash_driver);
+}
+
+module_init(of_physmap_init);
+module_exit(of_physmap_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>");
+MODULE_DESCRIPTION("Configurable MTD map driver for OF");
pdata = pdev->dev.platform_data;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
goto exit_error;
}
- memset(info, 0, sizeof(*info));
platform_set_drvdata(pdev, info);
info->dev = &pdev->dev;
/*
* Allocate the map_info structs in one go.
*/
- info = kmalloc(size, GFP_KERNEL);
+ info = kzalloc(size, GFP_KERNEL);
if (!info) {
ret = -ENOMEM;
goto out;
}
- memset(info, 0, size);
-
if (plat->init) {
ret = plat->init();
if (ret)
pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx);
- map_banks[idx] =
- (struct map_info *)kmalloc(sizeof(struct map_info),
- GFP_KERNEL);
+ map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
if (map_banks[idx] == NULL) {
ret = -ENOMEM;
goto error_mem;
}
- memset((void *)map_banks[idx], 0, sizeof(struct map_info));
- map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+ map_banks[idx]->name = kzalloc(16, GFP_KERNEL);
if (map_banks[idx]->name == NULL) {
ret = -ENOMEM;
goto error_mem;
}
- memset((void *)map_banks[idx]->name, 0, 16);
sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
map_banks[idx]->size = flash_size;
printk(KERN_INFO "%s: chip probing count %d\n", __FUNCTION__, idx);
- map_banks[idx] = (struct map_info *)kmalloc(sizeof(struct map_info), GFP_KERNEL);
+ map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
if(map_banks[idx] == NULL) {
ret = -ENOMEM;
/* FIXME: What if some MTD devices were probed already? */
goto error_mem;
}
- memset((void *)map_banks[idx], 0, sizeof(struct map_info));
map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
if (!map_banks[idx]->name) {
unsigned long block, nsect;
char *buf;
- block = req->sector;
- nsect = req->current_nr_sectors;
+ block = req->sector << 9 >> tr->blkshift;
+ nsect = req->current_nr_sectors << 9 >> tr->blkshift;
+
buf = req->buffer;
if (!blk_fs_request(req))
return 0;
- if (block + nsect > get_capacity(req->rq_disk))
+ if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk))
return 0;
switch(rq_data_dir(req)) {
case READ:
- for (; nsect > 0; nsect--, block++, buf += 512)
+ for (; nsect > 0; nsect--, block++, buf += tr->blksize)
if (tr->readsect(dev, block, buf))
return 0;
return 1;
if (!tr->writesect)
return 0;
- for (; nsect > 0; nsect--, block++, buf += 512)
+ for (; nsect > 0; nsect--, block++, buf += tr->blksize)
if (tr->writesect(dev, block, buf))
return 0;
return 1;
/* 2.5 has capacity in units of 512 bytes while still
having BLOCK_SIZE_BITS set to 10. Just to keep us amused. */
- set_capacity(gd, (new->size * new->blksize) >> 9);
+ set_capacity(gd, (new->size * tr->blksize) >> 9);
gd->private_data = new;
new->blkcore_priv = gd;
if (!blktrans_notifier.list.next)
register_mtd_user(&blktrans_notifier);
- tr->blkcore_priv = kmalloc(sizeof(*tr->blkcore_priv), GFP_KERNEL);
+ tr->blkcore_priv = kzalloc(sizeof(*tr->blkcore_priv), GFP_KERNEL);
if (!tr->blkcore_priv)
return -ENOMEM;
- memset(tr->blkcore_priv, 0, sizeof(*tr->blkcore_priv));
-
mutex_lock(&mtd_table_mutex);
ret = register_blkdev(tr->major, tr->name);
}
tr->blkcore_priv->rq->queuedata = tr;
+ blk_queue_hardsect_size(tr->blkcore_priv->rq, tr->blksize);
+ tr->blkshift = ffs(tr->blksize) - 1;
ret = kernel_thread(mtd_blktrans_thread, tr, CLONE_KERNEL);
if (ret < 0) {
}
/* OK, it's not open. Create cache info for it */
- mtdblk = kmalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
+ mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
if (!mtdblk)
return -ENOMEM;
- memset(mtdblk, 0, sizeof(*mtdblk));
mtdblk->count = 1;
mtdblk->mtd = mtd;
static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
- struct mtd_blktrans_dev *dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ struct mtd_blktrans_dev *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return;
- memset(dev, 0, sizeof(*dev));
-
dev->mtd = mtd;
dev->devnum = mtd->index;
- dev->blksize = 512;
+
dev->size = mtd->size >> 9;
dev->tr = tr;
.name = "mtdblock",
.major = 31,
.part_bits = 0,
+ .blksize = 512,
.open = mtdblock_open,
.flush = mtdblock_flush,
.release = mtdblock_release,
static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
- struct mtd_blktrans_dev *dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ struct mtd_blktrans_dev *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return;
- memset(dev, 0, sizeof(*dev));
-
dev->mtd = mtd;
dev->devnum = mtd->index;
- dev->blksize = 512;
+
dev->size = mtd->size >> 9;
dev->tr = tr;
dev->readonly = 1;
.name = "mtdblock",
.major = 31,
.part_bits = 0,
+ .blksize = 512,
.readsect = mtdblock_readsect,
.writesect = mtdblock_writesect,
.add_mtd = mtdblock_add_mtd,
#include <linux/device.h>
#include <linux/fs.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
mtd = get_mtd_device(NULL, devnum);
- if (!mtd)
- return -ENODEV;
+ if (IS_ERR(mtd))
+ return PTR_ERR(mtd);
if (MTD_ABSENT == mtd->type) {
put_mtd_device(mtd);
if(!(file->f_mode & 2))
return -EPERM;
- erase=kmalloc(sizeof(struct erase_info),GFP_KERNEL);
+ erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
if (!erase)
ret = -ENOMEM;
else {
init_waitqueue_head(&waitq);
- memset (erase,0,sizeof(struct erase_info));
if (copy_from_user(&erase->addr, argp,
sizeof(struct erase_info_user))) {
kfree(erase);
if (ret)
return ret;
- ops.len = buf.length;
ops.ooblen = buf.length;
ops.ooboffs = buf.start & (mtd->oobsize - 1);
ops.datbuf = NULL;
ops.mode = MTD_OOB_PLACE;
- if (ops.ooboffs && ops.len > (mtd->oobsize - ops.ooboffs))
+ if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
buf.start &= ~(mtd->oobsize - 1);
ret = mtd->write_oob(mtd, buf.start, &ops);
- if (copy_to_user(argp + sizeof(uint32_t), &ops.retlen,
+ if (copy_to_user(argp + sizeof(uint32_t), &ops.oobretlen,
sizeof(uint32_t)))
ret = -EFAULT;
if (ret)
return ret;
- ops.len = buf.length;
ops.ooblen = buf.length;
ops.ooboffs = buf.start & (mtd->oobsize - 1);
ops.datbuf = NULL;
buf.start &= ~(mtd->oobsize - 1);
ret = mtd->read_oob(mtd, buf.start, &ops);
- if (put_user(ops.retlen, (uint32_t __user *)argp))
+ if (put_user(ops.oobretlen, (uint32_t __user *)argp))
ret = -EFAULT;
- else if (ops.retlen && copy_to_user(buf.ptr, ops.oobbuf,
- ops.retlen))
+ else if (ops.oobretlen && copy_to_user(buf.ptr, ops.oobbuf,
+ ops.oobretlen))
ret = -EFAULT;
kfree(ops.oobbuf);
memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
sizeof(oi.oobfree));
+ oi.eccbytes = mtd->ecclayout->eccbytes;
if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
return -EFAULT;
if (!mtd->ecclayout)
return -EOPNOTSUPP;
- if (copy_to_user(argp, &mtd->ecclayout,
+ if (copy_to_user(argp, mtd->ecclayout,
sizeof(struct nand_ecclayout)))
return -EFAULT;
break;
struct mtd_oob_ops devops = *ops;
int i, err, ret = 0;
- ops->retlen = 0;
+ ops->retlen = ops->oobretlen = 0;
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
err = subdev->read_oob(subdev, from, &devops);
ops->retlen += devops.retlen;
+ ops->oobretlen += devops.oobretlen;
/* Save information about bitflips! */
if (unlikely(err)) {
return err;
}
- devops.len = ops->len - ops->retlen;
- if (!devops.len)
- return ret;
-
- if (devops.datbuf)
+ if (devops.datbuf) {
+ devops.len = ops->len - ops->retlen;
+ if (!devops.len)
+ return ret;
devops.datbuf += devops.retlen;
- if (devops.oobbuf)
- devops.oobbuf += devops.ooblen;
+ }
+ if (devops.oobbuf) {
+ devops.ooblen = ops->ooblen - ops->oobretlen;
+ if (!devops.ooblen)
+ return ret;
+ devops.oobbuf += ops->oobretlen;
+ }
from = 0;
}
if (err)
return err;
- devops.len = ops->len - ops->retlen;
- if (!devops.len)
- return 0;
-
- if (devops.datbuf)
+ if (devops.datbuf) {
+ devops.len = ops->len - ops->retlen;
+ if (!devops.len)
+ return 0;
devops.datbuf += devops.retlen;
- if (devops.oobbuf)
- devops.oobbuf += devops.ooblen;
+ }
+ if (devops.oobbuf) {
+ devops.ooblen = ops->ooblen - ops->oobretlen;
+ if (!devops.ooblen)
+ return 0;
+ devops.oobbuf += devops.oobretlen;
+ }
to = 0;
}
return -EINVAL;
/* allocate the device structure */
size = SIZEOF_STRUCT_MTD_CONCAT(num_devs);
- concat = kmalloc(size, GFP_KERNEL);
+ concat = kzalloc(size, GFP_KERNEL);
if (!concat) {
printk
("memory allocation error while creating concatenated device \"%s\"\n",
name);
return NULL;
}
- memset(concat, 0, size);
concat->subdev = (struct mtd_info **) (concat + 1);
/*
concat->mtd.ecc_stats.badblocks +=
subdev[i]->ecc_stats.badblocks;
if (concat->mtd.writesize != subdev[i]->writesize ||
+ concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
concat->mtd.oobsize != subdev[i]->oobsize ||
concat->mtd.ecctype != subdev[i]->ecctype ||
concat->mtd.eccsize != subdev[i]->eccsize ||
#include <linux/timer.h>
#include <linux/major.h>
#include <linux/fs.h>
+#include <linux/err.h>
#include <linux/ioctl.h>
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
* Given a number and NULL address, return the num'th entry in the device
* table, if any. Given an address and num == -1, search the device table
* for a device with that address and return if it's still present. Given
- * both, return the num'th driver only if its address matches. Return NULL
- * if not.
+ * both, return the num'th driver only if its address matches. Return
+ * error code if not.
*/
struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
{
struct mtd_info *ret = NULL;
- int i;
+ int i, err = -ENODEV;
mutex_lock(&mtd_table_mutex);
ret = NULL;
}
- if (ret && !try_module_get(ret->owner))
- ret = NULL;
+ if (!ret)
+ goto out_unlock;
+
+ if (!try_module_get(ret->owner))
+ goto out_unlock;
- if (ret)
- ret->usecount++;
+ if (ret->get_device) {
+ err = ret->get_device(ret);
+ if (err)
+ goto out_put;
+ }
+ ret->usecount++;
mutex_unlock(&mtd_table_mutex);
return ret;
+
+out_put:
+ module_put(ret->owner);
+out_unlock:
+ mutex_unlock(&mtd_table_mutex);
+ return ERR_PTR(err);
+}
+
+/**
+ * get_mtd_device_nm - obtain a validated handle for an MTD device by
+ * device name
+ * @name: MTD device name to open
+ *
+ * This function returns MTD device description structure in case of
+ * success and an error code in case of failure.
+ */
+
+struct mtd_info *get_mtd_device_nm(const char *name)
+{
+ int i, err = -ENODEV;
+ struct mtd_info *mtd = NULL;
+
+ mutex_lock(&mtd_table_mutex);
+
+ for (i = 0; i < MAX_MTD_DEVICES; i++) {
+ if (mtd_table[i] && !strcmp(name, mtd_table[i]->name)) {
+ mtd = mtd_table[i];
+ break;
+ }
+ }
+
+ if (!mtd)
+ goto out_unlock;
+
+ if (!try_module_get(mtd->owner))
+ goto out_unlock;
+
+ if (mtd->get_device) {
+ err = mtd->get_device(mtd);
+ if (err)
+ goto out_put;
+ }
+
+ mtd->usecount++;
+ mutex_unlock(&mtd_table_mutex);
+ return mtd;
+
+out_put:
+ module_put(mtd->owner);
+out_unlock:
+ mutex_unlock(&mtd_table_mutex);
+ return ERR_PTR(err);
}
void put_mtd_device(struct mtd_info *mtd)
mutex_lock(&mtd_table_mutex);
c = --mtd->usecount;
+ if (mtd->put_device)
+ mtd->put_device(mtd);
mutex_unlock(&mtd_table_mutex);
BUG_ON(c < 0);
}
/* default_mtd_writev - default mtd writev method for MTD devices that
- * dont implement their own
+ * don't implement their own
*/
int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
return ret;
}
-EXPORT_SYMBOL(add_mtd_device);
-EXPORT_SYMBOL(del_mtd_device);
-EXPORT_SYMBOL(get_mtd_device);
-EXPORT_SYMBOL(put_mtd_device);
-EXPORT_SYMBOL(register_mtd_user);
-EXPORT_SYMBOL(unregister_mtd_user);
-EXPORT_SYMBOL(default_mtd_writev);
+EXPORT_SYMBOL_GPL(add_mtd_device);
+EXPORT_SYMBOL_GPL(del_mtd_device);
+EXPORT_SYMBOL_GPL(get_mtd_device);
+EXPORT_SYMBOL_GPL(get_mtd_device_nm);
+EXPORT_SYMBOL_GPL(put_mtd_device);
+EXPORT_SYMBOL_GPL(register_mtd_user);
+EXPORT_SYMBOL_GPL(unregister_mtd_user);
+EXPORT_SYMBOL_GPL(default_mtd_writev);
#ifdef CONFIG_PROC_FS
if (from >= mtd->size)
return -EINVAL;
- if (from + ops->len > mtd->size)
+ if (ops->datbuf && from + ops->len > mtd->size)
return -EINVAL;
res = part->master->read_oob(part->master, from + part->offset, ops);
if (to >= mtd->size)
return -EINVAL;
- if (to + ops->len > mtd->size)
+ if (ops->datbuf && to + ops->len > mtd->size)
return -EINVAL;
return part->master->write_oob(part->master, to + part->offset, ops);
}
for (i = 0; i < nbparts; i++) {
/* allocate the partition structure */
- slave = kmalloc (sizeof(*slave), GFP_KERNEL);
+ slave = kzalloc (sizeof(*slave), GFP_KERNEL);
if (!slave) {
printk ("memory allocation error while creating partitions for \"%s\"\n",
master->name);
del_mtd_partitions(master);
return -ENOMEM;
}
- memset(slave, 0, sizeof(*slave));
list_add(&slave->list, &mtd_partitions);
/* set up the MTD object for this partition */
slave->mtd.oobsize = master->oobsize;
slave->mtd.ecctype = master->ecctype;
slave->mtd.eccsize = master->eccsize;
+ slave->mtd.subpage_sft = master->subpage_sft;
slave->mtd.name = parts[i].name;
slave->mtd.bank_size = master->bank_size;
depends on MTD_NAND && SH_SOLUTION_ENGINE
select REED_SOLOMON
select REED_SOLOMON_DEC8
+ select BITREVERSE
help
This enables the driver for the Renesas Technology AG-AND
flash interface board (FROM_BOARD4)
config MTD_NAND_NDFC
tristate "NDFC NanD Flash Controller"
depends on MTD_NAND && 44x
+ select MTD_NAND_ECC_SMC
help
NDFC Nand Flash Controllers are integrated in EP44x SoCs
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on MTD_NAND && ARCH_PXA
+config MTD_NAND_CAFE
+ tristate "NAND support for OLPC CAFÉ chip"
+ depends on PCI
+ help
+ Use NAND flash attached to the CAFÉ chip designed for the $100
+ laptop.
+
config MTD_NAND_CS553X
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
If you say "m", the module will be called "cs553x_nand.ko".
+config MTD_NAND_AT91
+ bool "Support for NAND Flash / SmartMedia on AT91"
+ depends on MTD_NAND && ARCH_AT91
+ help
+ Enables support for NAND Flash / Smart Media Card interface
+ on Atmel AT91 processors.
+
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
depends on MTD_NAND && MTD_PARTITIONS
obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
+obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
+obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
-nand-objs = nand_base.o nand_bbt.o
+nand-objs := nand_base.o nand_bbt.o
+cafe_nand-objs := cafe.o cafe_ecc.o
--- /dev/null
+/*
+ * drivers/mtd/nand/at91_nand.c
+ *
+ * Copyright (C) 2003 Rick Bronson
+ *
+ * Derived from drivers/mtd/nand/autcpu12.c
+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * Derived from drivers/mtd/spia.c
+ * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+struct at91_nand_host {
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ struct at91_nand_data *board;
+};
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct at91_nand_host *host = nand_chip->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, host->io_base + (1 << host->board->cle));
+ else
+ writeb(cmd, host->io_base + (1 << host->board->ale));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int at91_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct at91_nand_host *host = nand_chip->priv;
+
+ return at91_get_gpio_value(host->board->rdy_pin);
+}
+
+/*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 1);
+}
+
+/*
+ * Probe for the NAND device.
+ */
+static int __init at91_nand_probe(struct platform_device *pdev)
+{
+ struct at91_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ int res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *partitions = NULL;
+ int num_partitions = 0;
+#endif
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+ if (!host) {
+ printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
+ host->io_base = ioremap(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start + 1);
+ if (host->io_base == NULL) {
+ printk(KERN_ERR "at91_nand: ioremap failed\n");
+ kfree(host);
+ return -EIO;
+ }
+
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ host->board = pdev->dev.platform_data;
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+ mtd->owner = THIS_MODULE;
+
+ /* Set address of NAND IO lines */
+ nand_chip->IO_ADDR_R = host->io_base;
+ nand_chip->IO_ADDR_W = host->io_base;
+ nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+ nand_chip->dev_ready = at91_nand_device_ready;
+ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ nand_chip->chip_delay = 20; /* 20us command delay time */
+
+ if (host->board->bus_width_16) /* 16-bit bus width */
+ nand_chip->options |= NAND_BUSWIDTH_16;
+
+ platform_set_drvdata(pdev, host);
+ at91_nand_enable(host);
+
+ if (host->board->det_pin) {
+ if (at91_get_gpio_value(host->board->det_pin)) {
+ printk ("No SmartMedia card inserted.\n");
+ res = ENXIO;
+ goto out;
+ }
+ }
+
+ /* Scan to find existance of the device */
+ if (nand_scan(mtd, 1)) {
+ res = -ENXIO;
+ goto out;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (host->board->partition_info)
+ partitions = host->board->partition_info(mtd->size, &num_partitions);
+
+ if ((!partitions) || (num_partitions == 0)) {
+ printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+ res = ENXIO;
+ goto release;
+ }
+
+ res = add_mtd_partitions(mtd, partitions, num_partitions);
+#else
+ res = add_mtd_device(mtd);
+#endif
+
+ if (!res)
+ return res;
+
+release:
+ nand_release(mtd);
+out:
+ at91_nand_disable(host);
+ platform_set_drvdata(pdev, NULL);
+ iounmap(host->io_base);
+ kfree(host);
+ return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int __devexit at91_nand_remove(struct platform_device *pdev)
+{
+ struct at91_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+
+ at91_nand_disable(host);
+
+ iounmap(host->io_base);
+ kfree(host);
+
+ return 0;
+}
+
+static struct platform_driver at91_nand_driver = {
+ .probe = at91_nand_probe,
+ .remove = at91_nand_remove,
+ .driver = {
+ .name = "at91_nand",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_nand_init(void)
+{
+ return platform_driver_register(&at91_nand_driver);
+}
+
+
+static void __exit at91_nand_exit(void)
+{
+ platform_driver_unregister(&at91_nand_driver);
+}
+
+
+module_init(at91_nand_init);
+module_exit(at91_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
--- /dev/null
+/*
+ * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
+ *
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#define DEBUG
+
+#include <linux/device.h>
+#undef DEBUG
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+
+#define CAFE_NAND_CTRL1 0x00
+#define CAFE_NAND_CTRL2 0x04
+#define CAFE_NAND_CTRL3 0x08
+#define CAFE_NAND_STATUS 0x0c
+#define CAFE_NAND_IRQ 0x10
+#define CAFE_NAND_IRQ_MASK 0x14
+#define CAFE_NAND_DATA_LEN 0x18
+#define CAFE_NAND_ADDR1 0x1c
+#define CAFE_NAND_ADDR2 0x20
+#define CAFE_NAND_TIMING1 0x24
+#define CAFE_NAND_TIMING2 0x28
+#define CAFE_NAND_TIMING3 0x2c
+#define CAFE_NAND_NONMEM 0x30
+#define CAFE_NAND_ECC_RESULT 0x3C
+#define CAFE_NAND_DMA_CTRL 0x40
+#define CAFE_NAND_DMA_ADDR0 0x44
+#define CAFE_NAND_DMA_ADDR1 0x48
+#define CAFE_NAND_ECC_SYN01 0x50
+#define CAFE_NAND_ECC_SYN23 0x54
+#define CAFE_NAND_ECC_SYN45 0x58
+#define CAFE_NAND_ECC_SYN67 0x5c
+#define CAFE_NAND_READ_DATA 0x1000
+#define CAFE_NAND_WRITE_DATA 0x2000
+
+#define CAFE_GLOBAL_CTRL 0x3004
+#define CAFE_GLOBAL_IRQ 0x3008
+#define CAFE_GLOBAL_IRQ_MASK 0x300c
+#define CAFE_NAND_RESET 0x3034
+
+int cafe_correct_ecc(unsigned char *buf,
+ unsigned short *chk_syndrome_list);
+
+struct cafe_priv {
+ struct nand_chip nand;
+ struct pci_dev *pdev;
+ void __iomem *mmio;
+ uint32_t ctl1;
+ uint32_t ctl2;
+ int datalen;
+ int nr_data;
+ int data_pos;
+ int page_addr;
+ dma_addr_t dmaaddr;
+ unsigned char *dmabuf;
+};
+
+static int usedma = 1;
+module_param(usedma, int, 0644);
+
+static int skipbbt = 0;
+module_param(skipbbt, int, 0644);
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+static int regdebug = 0;
+module_param(regdebug, int, 0644);
+
+static int checkecc = 1;
+module_param(checkecc, int, 0644);
+
+static int slowtiming = 0;
+module_param(slowtiming, int, 0644);
+
+/* Hrm. Why isn't this already conditional on something in the struct device? */
+#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
+
+/* Make it easier to switch to PIO if we need to */
+#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr)
+#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr)
+
+static int cafe_device_ready(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+
+ cafe_writel(cafe, irqs, NAND_IRQ);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n",
+ result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ),
+ cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ return result;
+}
+
+
+static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(cafe->dmabuf + cafe->datalen, buf, len);
+ else
+ memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len);
+
+ cafe->datalen += len;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n",
+ len, cafe->datalen);
+}
+
+static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(buf, cafe->dmabuf + cafe->datalen, len);
+ else
+ memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n",
+ len, cafe->datalen);
+ cafe->datalen += len;
+}
+
+static uint8_t cafe_read_byte(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ uint8_t d;
+
+ cafe_read_buf(mtd, &d, 1);
+ cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d);
+
+ return d;
+}
+
+static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int adrbytes = 0;
+ uint32_t ctl1;
+ uint32_t doneint = 0x80000000;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n",
+ command, column, page_addr);
+
+ if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) {
+ /* Second half of a command we already calculated */
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2);
+ ctl1 = cafe->ctl1;
+ cafe->ctl2 &= ~(1<<30);
+ cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n",
+ cafe->ctl1, cafe->nr_data);
+ goto do_command;
+ }
+ /* Reset ECC engine */
+ cafe_writel(cafe, 0, NAND_CTRL2);
+
+ /* Emulate NAND_CMD_READOOB on large-page chips */
+ if (mtd->writesize > 512 &&
+ command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* FIXME: Do we need to send read command before sending data
+ for small-page chips, to position the buffer correctly? */
+
+ if (column != -1) {
+ cafe_writel(cafe, column, NAND_ADDR1);
+ adrbytes = 2;
+ if (page_addr != -1)
+ goto write_adr2;
+ } else if (page_addr != -1) {
+ cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1);
+ page_addr >>= 16;
+ write_adr2:
+ cafe_writel(cafe, page_addr, NAND_ADDR2);
+ adrbytes += 2;
+ if (mtd->size > mtd->writesize << 16)
+ adrbytes++;
+ }
+
+ cafe->data_pos = cafe->datalen = 0;
+
+ /* Set command valid bit */
+ ctl1 = 0x80000000 | command;
+
+ /* Set RD or WR bits as appropriate */
+ if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) {
+ ctl1 |= (1<<26); /* rd */
+ /* Always 5 bytes, for now */
+ cafe->datalen = 4;
+ /* And one address cycle -- even for STATUS, since the controller doesn't work without */
+ adrbytes = 1;
+ } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) {
+ ctl1 |= 1<<26; /* rd */
+ /* For now, assume just read to end of page */
+ cafe->datalen = mtd->writesize + mtd->oobsize - column;
+ } else if (command == NAND_CMD_SEQIN)
+ ctl1 |= 1<<25; /* wr */
+
+ /* Set number of address bytes */
+ if (adrbytes)
+ ctl1 |= ((adrbytes-1)|8) << 27;
+
+ if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
+ /* Ignore the first command of a pair; the hardware
+ deals with them both at once, later */
+ cafe->ctl1 = ctl1;
+ cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
+ cafe->ctl1, cafe->datalen);
+ return;
+ }
+ /* RNDOUT and READ0 commands need a following byte */
+ if (command == NAND_CMD_RNDOUT)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2);
+ else if (command == NAND_CMD_READ0 && mtd->writesize > 512)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
+
+ do_command:
+ cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
+ cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
+
+ /* NB: The datasheet lies -- we really should be subtracting 1 here */
+ cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN);
+ cafe_writel(cafe, 0x90000000, NAND_IRQ);
+ if (usedma && (ctl1 & (3<<25))) {
+ uint32_t dmactl = 0xc0000000 + cafe->datalen;
+ /* If WR or RD bits set, set up DMA */
+ if (ctl1 & (1<<26)) {
+ /* It's a read */
+ dmactl |= (1<<29);
+ /* ... so it's done when the DMA is done, not just
+ the command. */
+ doneint = 0x10000000;
+ }
+ cafe_writel(cafe, dmactl, NAND_DMA_CTRL);
+ }
+ cafe->datalen = 0;
+
+ if (unlikely(regdebug)) {
+ int i;
+ printk("About to write command %08x to register 0\n", ctl1);
+ for (i=4; i< 0x5c; i+=4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ }
+
+ cafe_writel(cafe, ctl1, NAND_CTRL1);
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ if (1) {
+ int c = 500000;
+ uint32_t irqs;
+
+ while (c--) {
+ irqs = cafe_readl(cafe, NAND_IRQ);
+ if (irqs & doneint)
+ break;
+ udelay(1);
+ if (!(c % 100000))
+ cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs);
+ cpu_relax();
+ }
+ cafe_writel(cafe, doneint, NAND_IRQ);
+ cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n",
+ command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ));
+ }
+
+ WARN_ON(cafe->ctl2 & (1<<30));
+
+ switch (command) {
+
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+ return;
+ }
+ nand_wait_ready(mtd);
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+}
+
+static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ //struct cafe_priv *cafe = mtd->priv;
+ // cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr);
+}
+
+static int cafe_nand_interrupt(int irq, void *id)
+{
+ struct mtd_info *mtd = id;
+ struct cafe_priv *cafe = mtd->priv;
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+ cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ);
+ if (!irqs)
+ return IRQ_NONE;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ));
+ return IRQ_HANDLED;
+}
+
+static void cafe_nand_bug(struct mtd_info *mtd)
+{
+ BUG();
+}
+
+static int cafe_nand_write_oob(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status = 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/* Don't use -- use nand_read_oob_std for now */
+static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 1;
+}
+/**
+ * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
+ cafe_readl(cafe, NAND_ECC_RESULT),
+ cafe_readl(cafe, NAND_ECC_SYN01));
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) {
+ unsigned short syn[8];
+ int i;
+
+ for (i=0; i<8; i+=2) {
+ uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
+ syn[i] = tmp & 0xfff;
+ syn[i+1] = (tmp >> 16) & 0xfff;
+ }
+
+ if ((i = cafe_correct_ecc(buf, syn)) < 0) {
+ dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
+ cafe_readl(cafe, NAND_ADDR2) * 2048);
+ for (i=0; i< 0x5c; i+=4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ mtd->ecc_stats.failed++;
+ } else {
+ dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", i);
+ mtd->ecc_stats.corrected += i;
+ }
+ }
+
+
+ return 0;
+}
+
+static struct nand_ecclayout cafe_oobinfo_2048 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 50}}
+};
+
+/* Ick. The BBT code really ought to be able to work this bit out
+ for itself from the above, at least for the 2KiB case */
+static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
+static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
+
+static uint8_t cafe_bbt_pattern_512[] = { 0xBB };
+static uint8_t cafe_mirror_pattern_512[] = { 0xBC };
+
+
+static struct nand_bbt_descr cafe_bbt_main_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_2048
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_2048
+};
+
+static struct nand_ecclayout cafe_oobinfo_512 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 2}}
+};
+
+static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_512
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_512
+};
+
+
+static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Set up ECC autogeneration */
+ cafe->ctl2 |= (1<<30);
+}
+
+static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+ if (unlikely(raw))
+ chip->ecc.write_page_raw(mtd, chip, buf);
+ else
+ chip->ecc.write_page(mtd, chip, buf);
+
+ /*
+ * Cached progamming disabled for now, Not sure if its worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ */
+ cached = 0;
+
+ if (!cached || !(chip->options & NAND_CACHEPRG)) {
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ }
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /* Send command to read back the data */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ if (chip->verify_buf(mtd, buf, mtd->writesize))
+ return -EIO;
+#endif
+ return 0;
+}
+
+static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+static int __devinit cafe_nand_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mtd_info *mtd;
+ struct cafe_priv *cafe;
+ uint32_t ctrl;
+ int err = 0;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
+ if (!mtd) {
+ dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
+ return -ENOMEM;
+ }
+ cafe = (void *)(&mtd[1]);
+
+ mtd->priv = cafe;
+ mtd->owner = THIS_MODULE;
+
+ cafe->pdev = pdev;
+ cafe->mmio = pci_iomap(pdev, 0, 0);
+ if (!cafe->mmio) {
+ dev_warn(&pdev->dev, "failed to iomap\n");
+ err = -ENOMEM;
+ goto out_free_mtd;
+ }
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+ cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
+
+ cafe->nand.cmdfunc = cafe_nand_cmdfunc;
+ cafe->nand.dev_ready = cafe_device_ready;
+ cafe->nand.read_byte = cafe_read_byte;
+ cafe->nand.read_buf = cafe_read_buf;
+ cafe->nand.write_buf = cafe_write_buf;
+ cafe->nand.select_chip = cafe_select_chip;
+
+ cafe->nand.chip_delay = 0;
+
+ /* Enable the following for a flash based bad block table */
+ cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+
+ if (skipbbt) {
+ cafe->nand.options |= NAND_SKIP_BBTSCAN;
+ cafe->nand.block_bad = cafe_nand_block_bad;
+ }
+
+ /* Start off by resetting the NAND controller completely */
+ cafe_writel(cafe, 1, NAND_RESET);
+ cafe_writel(cafe, 0, NAND_RESET);
+
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+
+ /* Timings from Marvell's test code (not verified or calculated by us) */
+ if (!slowtiming) {
+ cafe_writel(cafe, 0x01010a0a, NAND_TIMING1);
+ cafe_writel(cafe, 0x24121212, NAND_TIMING2);
+ cafe_writel(cafe, 0x11000000, NAND_TIMING3);
+ } else {
+ cafe_writel(cafe, 0xffffffff, NAND_TIMING1);
+ cafe_writel(cafe, 0xffffffff, NAND_TIMING2);
+ cafe_writel(cafe, 0xffffffff, NAND_TIMING3);
+ }
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+ err = request_irq(pdev->irq, &cafe_nand_interrupt, SA_SHIRQ, "CAFE NAND", mtd);
+ if (err) {
+ dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
+
+ goto out_free_dma;
+ }
+#if 1
+ /* Disable master reset, enable NAND clock */
+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
+
+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+ /* Set up DMA address */
+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+ if (sizeof(cafe->dmaaddr) > 4)
+ /* Shift in two parts to shut the compiler up */
+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+ else
+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+ cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+#endif
+#if 1
+ mtd->writesize=2048;
+ mtd->oobsize = 0x40;
+ memset(cafe->dmabuf, 0x5a, 2112);
+ cafe->nand.cmdfunc(mtd, NAND_CMD_READID, 0, -1);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+#endif
+#if 0
+ cafe->nand.cmdfunc(mtd, NAND_CMD_READ0, 0, 0);
+ // nand_wait_ready(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+#endif
+#if 0
+ writel(0x84600070, cafe->mmio);
+ udelay(10);
+ cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
+#endif
+ /* Scan to find existance of the device */
+ if (nand_scan_ident(mtd, 1)) {
+ err = -ENXIO;
+ goto out_irq;
+ }
+
+ cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= 1<<29; /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ if (mtd->writesize == 2048) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_2048;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
+ } else if (mtd->writesize == 512) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_512;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
+ } else {
+ printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
+ goto out_irq;
+ }
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
+ cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
+ cafe->nand.ecc.correct = (void *)cafe_nand_bug;
+ cafe->nand.write_page = cafe_nand_write_page;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ err = nand_scan_tail(mtd);
+ if (err)
+ goto out_irq;
+
+ pci_set_drvdata(pdev, mtd);
+ add_mtd_device(mtd);
+ goto out;
+
+ out_irq:
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ out_ior:
+ pci_iounmap(pdev, cafe->mmio);
+ out_free_mtd:
+ kfree(mtd);
+ out:
+ return err;
+}
+
+static void __devexit cafe_nand_remove(struct pci_dev *pdev)
+{
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ del_mtd_device(mtd);
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ nand_release(mtd);
+ pci_iounmap(pdev, cafe->mmio);
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ kfree(mtd);
+}
+
+static struct pci_device_id cafe_nand_tbl[] = {
+ { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+
+static struct pci_driver cafe_nand_pci_driver = {
+ .name = "CAFÉ NAND",
+ .id_table = cafe_nand_tbl,
+ .probe = cafe_nand_probe,
+ .remove = __devexit_p(cafe_nand_remove),
+#ifdef CONFIG_PMx
+ .suspend = cafe_nand_suspend,
+ .resume = cafe_nand_resume,
+#endif
+};
+
+static int cafe_nand_init(void)
+{
+ return pci_register_driver(&cafe_nand_pci_driver);
+}
+
+static void cafe_nand_exit(void)
+{
+ pci_unregister_driver(&cafe_nand_pci_driver);
+}
+module_init(cafe_nand_init);
+module_exit(cafe_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFE chip");
+
+/* Correct ECC for 2048 bytes of 0xff:
+ 41 a0 71 65 54 27 f3 93 ec a9 be ed 0b a1 */
+
+/* dwmw2's B-test board, in case of completely screwing it:
+Bad eraseblock 2394 at 0x12b40000
+Bad eraseblock 2627 at 0x14860000
+Bad eraseblock 3349 at 0x1a2a0000
+*/
--- /dev/null
+/* Error correction for CAFÉ NAND controller
+ *
+ * © 2006 Marvell, Inc.
+ * Author: Tom Chiou
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+static unsigned short gf4096_mul(unsigned short, unsigned short);
+static unsigned short gf64_mul(unsigned short, unsigned short);
+static unsigned short gf4096_inv(unsigned short);
+static unsigned short err_pos(unsigned short);
+static void find_4bit_err_coefs(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short *);
+static void zero_4x5_col3(unsigned short[4][5]);
+static void zero_4x5_col2(unsigned short[4][5]);
+static void zero_4x5_col1(unsigned short[4][5]);
+static void swap_4x5_rows(unsigned short[4][5], int, int, int);
+static void swap_2x3_rows(unsigned short m[2][3]);
+static void solve_4x5(unsigned short m[4][5], unsigned short *, int *);
+static void sort_coefs(int *, unsigned short *, int);
+static void find_4bit_err_pats(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short *);
+static void find_3bit_err_coefs(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short,
+ unsigned short *);
+static void zero_3x4_col2(unsigned short[3][4]);
+static void zero_3x4_col1(unsigned short[3][4]);
+static void swap_3x4_rows(unsigned short[3][4], int, int, int);
+static void solve_3x4(unsigned short[3][4], unsigned short *, int *);
+static void find_3bit_err_pats(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short,
+ unsigned short *);
+
+static void find_2bit_err_pats(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short *);
+static void find_2x2_soln(unsigned short, unsigned short, unsigned short,
+ unsigned short, unsigned short, unsigned short,
+ unsigned short *);
+static void solve_2x3(unsigned short[2][3], unsigned short *);
+static int chk_no_err_only(unsigned short *, unsigned short *);
+static int chk_1_err_only(unsigned short *, unsigned short *);
+static int chk_2_err_only(unsigned short *, unsigned short *);
+static int chk_3_err_only(unsigned short *, unsigned short *);
+static int chk_4_err_only(unsigned short *, unsigned short *);
+
+static unsigned short gf64_mul(unsigned short a, unsigned short b)
+{
+ unsigned short tmp1, tmp2, tmp3, tmp4, tmp5;
+ unsigned short c_bit0, c_bit1, c_bit2, c_bit3, c_bit4, c_bit5, c;
+
+ tmp1 = ((a) ^ (a >> 5));
+ tmp2 = ((a >> 4) ^ (a >> 5));
+ tmp3 = ((a >> 3) ^ (a >> 4));
+ tmp4 = ((a >> 2) ^ (a >> 3));
+ tmp5 = ((a >> 1) ^ (a >> 2));
+
+ c_bit0 = ((a & b) ^ ((a >> 5) & (b >> 1)) ^ ((a >> 4) & (b >> 2)) ^
+ ((a >> 3) & (b >> 3)) ^ ((a >> 2) & (b >> 4)) ^ ((a >> 1) & (b >> 5))) & 0x1;
+
+ c_bit1 = (((a >> 1) & b) ^ (tmp1 & (b >> 1)) ^ (tmp2 & (b >> 2)) ^
+ (tmp3 & (b >> 3)) ^ (tmp4 & (b >> 4)) ^ (tmp5 & (b >> 5))) & 0x1;
+
+ c_bit2 = (((a >> 2) & b) ^ ((a >> 1) & (b >> 1)) ^ (tmp1 & (b >> 2)) ^
+ (tmp2 & (b >> 3)) ^ (tmp3 & (b >> 4)) ^ (tmp4 & (b >> 5))) & 0x1;
+
+ c_bit3 = (((a >> 3) & b) ^ ((a >> 2) & (b >> 1)) ^ ((a >> 1) & (b >> 2)) ^
+ (tmp1 & (b >> 3)) ^ (tmp2 & (b >> 4)) ^ (tmp3 & (b >> 5))) & 0x1;
+
+ c_bit4 = (((a >> 4) & b) ^ ((a >> 3) & (b >> 1)) ^ ((a >> 2) & (b >> 2)) ^
+ ((a >> 1) & (b >> 3)) ^ (tmp1 & (b >> 4)) ^ (tmp2 & (b >> 5))) & 0x1;
+
+ c_bit5 = (((a >> 5) & b) ^ ((a >> 4) & (b >> 1)) ^ ((a >> 3) & (b >> 2)) ^
+ ((a >> 2) & (b >> 3)) ^ ((a >> 1) & (b >> 4)) ^ (tmp1 & (b >> 5))) & 0x1;
+
+ c = c_bit0 | (c_bit1 << 1) | (c_bit2 << 2) | (c_bit3 << 3) | (c_bit4 << 4) | (c_bit5 << 5);
+
+ return c;
+}
+
+static unsigned short gf4096_mul(unsigned short a, unsigned short b)
+{
+ unsigned short ah, al, bh, bl, alxah, blxbh, ablh, albl, ahbh, ahbhB, c;
+
+ ah = (a >> 6) & 0x3f;
+ al = a & 0x3f;
+ bh = (b >> 6) & 0x3f;
+ bl = b & 0x3f;
+ alxah = al ^ ah;
+ blxbh = bl ^ bh;
+
+ ablh = gf64_mul(alxah, blxbh);
+ albl = gf64_mul(al, bl);
+ ahbh = gf64_mul(ah, bh);
+
+ ahbhB = ((ahbh & 0x1) << 5) |
+ ((ahbh & 0x20) >> 1) |
+ ((ahbh & 0x10) >> 1) | ((ahbh & 0x8) >> 1) | ((ahbh & 0x4) >> 1) | (((ahbh >> 1) ^ ahbh) & 0x1);
+
+ c = ((ablh ^ albl) << 6) | (ahbhB ^ albl);
+ return c;
+}
+
+static void find_2bit_err_pats(unsigned short s0, unsigned short s1, unsigned short r0, unsigned short r1, unsigned short *pats)
+{
+ find_2x2_soln(0x1, 0x1, r0, r1, s0, s1, pats);
+}
+
+static void find_3bit_err_coefs(unsigned short s0, unsigned short s1,
+ unsigned short s2, unsigned short s3, unsigned short s4, unsigned short s5, unsigned short *coefs)
+{
+ unsigned short m[3][4];
+ int row_order[3];
+
+ row_order[0] = 0;
+ row_order[1] = 1;
+ row_order[2] = 2;
+ m[0][0] = s2;
+ m[0][1] = s1;
+ m[0][2] = s0;
+ m[0][3] = s3;
+ m[1][0] = s3;
+ m[1][1] = s2;
+ m[1][2] = s1;
+ m[1][3] = s4;
+ m[2][0] = s4;
+ m[2][1] = s3;
+ m[2][2] = s2;
+ m[2][3] = s5;
+
+ if (m[0][2] != 0x0) {
+ zero_3x4_col2(m);
+ } else if (m[1][2] != 0x0) {
+ swap_3x4_rows(m, 0, 1, 4);
+ zero_3x4_col2(m);
+ } else if (m[2][2] != 0x0) {
+ swap_3x4_rows(m, 0, 2, 4);
+ zero_3x4_col2(m);
+ } else {
+ printk(KERN_ERR "Error: find_3bit_err_coefs, s0,s1,s2 all zeros!\n");
+ }
+
+ if (m[1][1] != 0x0) {
+ zero_3x4_col1(m);
+ } else if (m[2][1] != 0x0) {
+ swap_3x4_rows(m, 1, 2, 4);
+ zero_3x4_col1(m);
+ } else {
+ printk(KERN_ERR "Error: find_3bit_err_coefs, cannot resolve col 1!\n");
+ }
+
+ /* solve coefs */
+ solve_3x4(m, coefs, row_order);
+}
+
+static void zero_3x4_col2(unsigned short m[3][4])
+{
+ unsigned short minv1, minv2;
+
+ minv1 = gf4096_mul(m[1][2], gf4096_inv(m[0][2]));
+ minv2 = gf4096_mul(m[2][2], gf4096_inv(m[0][2]));
+ m[1][0] = m[1][0] ^ gf4096_mul(m[0][0], minv1);
+ m[1][1] = m[1][1] ^ gf4096_mul(m[0][1], minv1);
+ m[1][3] = m[1][3] ^ gf4096_mul(m[0][3], minv1);
+ m[2][0] = m[2][0] ^ gf4096_mul(m[0][0], minv2);
+ m[2][1] = m[2][1] ^ gf4096_mul(m[0][1], minv2);
+ m[2][3] = m[2][3] ^ gf4096_mul(m[0][3], minv2);
+}
+
+static void zero_3x4_col1(unsigned short m[3][4])
+{
+ unsigned short minv;
+ minv = gf4096_mul(m[2][1], gf4096_inv(m[1][1]));
+ m[2][0] = m[2][0] ^ gf4096_mul(m[1][0], minv);
+ m[2][3] = m[2][3] ^ gf4096_mul(m[1][3], minv);
+}
+
+static void swap_3x4_rows(unsigned short m[3][4], int i, int j, int col_width)
+{
+ unsigned short tmp0;
+ int cnt;
+ for (cnt = 0; cnt < col_width; cnt++) {
+ tmp0 = m[i][cnt];
+ m[i][cnt] = m[j][cnt];
+ m[j][cnt] = tmp0;
+ }
+}
+
+static void solve_3x4(unsigned short m[3][4], unsigned short *coefs, int *row_order)
+{
+ unsigned short tmp[3];
+ tmp[0] = gf4096_mul(m[2][3], gf4096_inv(m[2][0]));
+ tmp[1] = gf4096_mul((gf4096_mul(tmp[0], m[1][0]) ^ m[1][3]), gf4096_inv(m[1][1]));
+ tmp[2] = gf4096_mul((gf4096_mul(tmp[0], m[0][0]) ^ gf4096_mul(tmp[1], m[0][1]) ^ m[0][3]), gf4096_inv(m[0][2]));
+ sort_coefs(row_order, tmp, 3);
+ coefs[0] = tmp[0];
+ coefs[1] = tmp[1];
+ coefs[2] = tmp[2];
+}
+
+static void find_3bit_err_pats(unsigned short s0, unsigned short s1,
+ unsigned short s2, unsigned short r0,
+ unsigned short r1, unsigned short r2,
+ unsigned short *pats)
+{
+ find_2x2_soln(r0 ^ r2, r1 ^ r2,
+ gf4096_mul(r0, r0 ^ r2), gf4096_mul(r1, r1 ^ r2),
+ gf4096_mul(s0, r2) ^ s1, gf4096_mul(s1, r2) ^ s2, pats);
+ pats[2] = s0 ^ pats[0] ^ pats[1];
+}
+
+static void find_4bit_err_coefs(unsigned short s0, unsigned short s1,
+ unsigned short s2, unsigned short s3,
+ unsigned short s4, unsigned short s5,
+ unsigned short s6, unsigned short s7,
+ unsigned short *coefs)
+{
+ unsigned short m[4][5];
+ int row_order[4];
+
+ row_order[0] = 0;
+ row_order[1] = 1;
+ row_order[2] = 2;
+ row_order[3] = 3;
+
+ m[0][0] = s3;
+ m[0][1] = s2;
+ m[0][2] = s1;
+ m[0][3] = s0;
+ m[0][4] = s4;
+ m[1][0] = s4;
+ m[1][1] = s3;
+ m[1][2] = s2;
+ m[1][3] = s1;
+ m[1][4] = s5;
+ m[2][0] = s5;
+ m[2][1] = s4;
+ m[2][2] = s3;
+ m[2][3] = s2;
+ m[2][4] = s6;
+ m[3][0] = s6;
+ m[3][1] = s5;
+ m[3][2] = s4;
+ m[3][3] = s3;
+ m[3][4] = s7;
+
+ if (m[0][3] != 0x0) {
+ zero_4x5_col3(m);
+ } else if (m[1][3] != 0x0) {
+ swap_4x5_rows(m, 0, 1, 5);
+ zero_4x5_col3(m);
+ } else if (m[2][3] != 0x0) {
+ swap_4x5_rows(m, 0, 2, 5);
+ zero_4x5_col3(m);
+ } else if (m[3][3] != 0x0) {
+ swap_4x5_rows(m, 0, 3, 5);
+ zero_4x5_col3(m);
+ } else {
+ printk(KERN_ERR "Error: find_4bit_err_coefs, s0,s1,s2,s3 all zeros!\n");
+ }
+
+ if (m[1][2] != 0x0) {
+ zero_4x5_col2(m);
+ } else if (m[2][2] != 0x0) {
+ swap_4x5_rows(m, 1, 2, 5);
+ zero_4x5_col2(m);
+ } else if (m[3][2] != 0x0) {
+ swap_4x5_rows(m, 1, 3, 5);
+ zero_4x5_col2(m);
+ } else {
+ printk(KERN_ERR "Error: find_4bit_err_coefs, cannot resolve col 2!\n");
+ }
+
+ if (m[2][1] != 0x0) {
+ zero_4x5_col1(m);
+ } else if (m[3][1] != 0x0) {
+ swap_4x5_rows(m, 2, 3, 5);
+ zero_4x5_col1(m);
+ } else {
+ printk(KERN_ERR "Error: find_4bit_err_coefs, cannot resolve col 1!\n");
+ }
+
+ solve_4x5(m, coefs, row_order);
+}
+
+static void zero_4x5_col3(unsigned short m[4][5])
+{
+ unsigned short minv1, minv2, minv3;
+
+ minv1 = gf4096_mul(m[1][3], gf4096_inv(m[0][3]));
+ minv2 = gf4096_mul(m[2][3], gf4096_inv(m[0][3]));
+ minv3 = gf4096_mul(m[3][3], gf4096_inv(m[0][3]));
+
+ m[1][0] = m[1][0] ^ gf4096_mul(m[0][0], minv1);
+ m[1][1] = m[1][1] ^ gf4096_mul(m[0][1], minv1);
+ m[1][2] = m[1][2] ^ gf4096_mul(m[0][2], minv1);
+ m[1][4] = m[1][4] ^ gf4096_mul(m[0][4], minv1);
+ m[2][0] = m[2][0] ^ gf4096_mul(m[0][0], minv2);
+ m[2][1] = m[2][1] ^ gf4096_mul(m[0][1], minv2);
+ m[2][2] = m[2][2] ^ gf4096_mul(m[0][2], minv2);
+ m[2][4] = m[2][4] ^ gf4096_mul(m[0][4], minv2);
+ m[3][0] = m[3][0] ^ gf4096_mul(m[0][0], minv3);
+ m[3][1] = m[3][1] ^ gf4096_mul(m[0][1], minv3);
+ m[3][2] = m[3][2] ^ gf4096_mul(m[0][2], minv3);
+ m[3][4] = m[3][4] ^ gf4096_mul(m[0][4], minv3);
+}
+
+static void zero_4x5_col2(unsigned short m[4][5])
+{
+ unsigned short minv2, minv3;
+
+ minv2 = gf4096_mul(m[2][2], gf4096_inv(m[1][2]));
+ minv3 = gf4096_mul(m[3][2], gf4096_inv(m[1][2]));
+
+ m[2][0] = m[2][0] ^ gf4096_mul(m[1][0], minv2);
+ m[2][1] = m[2][1] ^ gf4096_mul(m[1][1], minv2);
+ m[2][4] = m[2][4] ^ gf4096_mul(m[1][4], minv2);
+ m[3][0] = m[3][0] ^ gf4096_mul(m[1][0], minv3);
+ m[3][1] = m[3][1] ^ gf4096_mul(m[1][1], minv3);
+ m[3][4] = m[3][4] ^ gf4096_mul(m[1][4], minv3);
+}
+
+static void zero_4x5_col1(unsigned short m[4][5])
+{
+ unsigned short minv;
+
+ minv = gf4096_mul(m[3][1], gf4096_inv(m[2][1]));
+
+ m[3][0] = m[3][0] ^ gf4096_mul(m[2][0], minv);
+ m[3][4] = m[3][4] ^ gf4096_mul(m[2][4], minv);
+}
+
+static void swap_4x5_rows(unsigned short m[4][5], int i, int j, int col_width)
+{
+ unsigned short tmp0;
+ int cnt;
+
+ for (cnt = 0; cnt < col_width; cnt++) {
+ tmp0 = m[i][cnt];
+ m[i][cnt] = m[j][cnt];
+ m[j][cnt] = tmp0;
+ }
+}
+
+static void solve_4x5(unsigned short m[4][5], unsigned short *coefs, int *row_order)
+{
+ unsigned short tmp[4];
+
+ tmp[0] = gf4096_mul(m[3][4], gf4096_inv(m[3][0]));
+ tmp[1] = gf4096_mul((gf4096_mul(tmp[0], m[2][0]) ^ m[2][4]), gf4096_inv(m[2][1]));
+ tmp[2] = gf4096_mul((gf4096_mul(tmp[0], m[1][0]) ^ gf4096_mul(tmp[1], m[1][1]) ^ m[1][4]), gf4096_inv(m[1][2]));
+ tmp[3] = gf4096_mul((gf4096_mul(tmp[0], m[0][0]) ^
+ gf4096_mul(tmp[1], m[0][1]) ^ gf4096_mul(tmp[2], m[0][2]) ^ m[0][4]), gf4096_inv(m[0][3]));
+ sort_coefs(row_order, tmp, 4);
+ coefs[0] = tmp[0];
+ coefs[1] = tmp[1];
+ coefs[2] = tmp[2];
+ coefs[3] = tmp[3];
+}
+
+static void sort_coefs(int *order, unsigned short *soln, int len)
+{
+ int cnt, start_cnt, least_ord, least_cnt;
+ unsigned short tmp0;
+ for (start_cnt = 0; start_cnt < len; start_cnt++) {
+ for (cnt = start_cnt; cnt < len; cnt++) {
+ if (cnt == start_cnt) {
+ least_ord = order[cnt];
+ least_cnt = start_cnt;
+ } else {
+ if (least_ord > order[cnt]) {
+ least_ord = order[cnt];
+ least_cnt = cnt;
+ }
+ }
+ }
+ if (least_cnt != start_cnt) {
+ tmp0 = order[least_cnt];
+ order[least_cnt] = order[start_cnt];
+ order[start_cnt] = tmp0;
+ tmp0 = soln[least_cnt];
+ soln[least_cnt] = soln[start_cnt];
+ soln[start_cnt] = tmp0;
+ }
+ }
+}
+
+static void find_4bit_err_pats(unsigned short s0, unsigned short s1,
+ unsigned short s2, unsigned short s3,
+ unsigned short z1, unsigned short z2,
+ unsigned short z3, unsigned short z4,
+ unsigned short *pats)
+{
+ unsigned short z4_z1, z3z4_z3z3, z4_z2, s0z4_s1, z1z4_z1z1,
+ z4_z3, z2z4_z2z2, s1z4_s2, z3z3z4_z3z3z3, z1z1z4_z1z1z1, z2z2z4_z2z2z2, s2z4_s3;
+ unsigned short tmp0, tmp1, tmp2, tmp3;
+
+ z4_z1 = z4 ^ z1;
+ z3z4_z3z3 = gf4096_mul(z3, z4) ^ gf4096_mul(z3, z3);
+ z4_z2 = z4 ^ z2;
+ s0z4_s1 = gf4096_mul(s0, z4) ^ s1;
+ z1z4_z1z1 = gf4096_mul(z1, z4) ^ gf4096_mul(z1, z1);
+ z4_z3 = z4 ^ z3;
+ z2z4_z2z2 = gf4096_mul(z2, z4) ^ gf4096_mul(z2, z2);
+ s1z4_s2 = gf4096_mul(s1, z4) ^ s2;
+ z3z3z4_z3z3z3 = gf4096_mul(gf4096_mul(z3, z3), z4) ^ gf4096_mul(gf4096_mul(z3, z3), z3);
+ z1z1z4_z1z1z1 = gf4096_mul(gf4096_mul(z1, z1), z4) ^ gf4096_mul(gf4096_mul(z1, z1), z1);
+ z2z2z4_z2z2z2 = gf4096_mul(gf4096_mul(z2, z2), z4) ^ gf4096_mul(gf4096_mul(z2, z2), z2);
+ s2z4_s3 = gf4096_mul(s2, z4) ^ s3;
+
+ //find err pat 0,1
+ find_2x2_soln(gf4096_mul(z4_z1, z3z4_z3z3) ^
+ gf4096_mul(z1z4_z1z1, z4_z3), gf4096_mul(z4_z2,
+ z3z4_z3z3) ^
+ gf4096_mul(z2z4_z2z2, z4_z3), gf4096_mul(z1z4_z1z1,
+ z3z3z4_z3z3z3) ^
+ gf4096_mul(z1z1z4_z1z1z1, z3z4_z3z3),
+ gf4096_mul(z2z4_z2z2,
+ z3z3z4_z3z3z3) ^ gf4096_mul(z2z2z4_z2z2z2,
+ z3z4_z3z3),
+ gf4096_mul(s0z4_s1, z3z4_z3z3) ^ gf4096_mul(s1z4_s2,
+ z4_z3),
+ gf4096_mul(s1z4_s2, z3z3z4_z3z3z3) ^ gf4096_mul(s2z4_s3, z3z4_z3z3), pats);
+ tmp0 = pats[0];
+ tmp1 = pats[1];
+ tmp2 = pats[0] ^ pats[1] ^ s0;
+ tmp3 = gf4096_mul(pats[0], z1) ^ gf4096_mul(pats[1], z2) ^ s1;
+
+ //find err pat 2,3
+ find_2x2_soln(0x1, 0x1, z3, z4, tmp2, tmp3, pats);
+ pats[2] = pats[0];
+ pats[3] = pats[1];
+ pats[0] = tmp0;
+ pats[1] = tmp1;
+}
+
+static void find_2x2_soln(unsigned short c00, unsigned short c01,
+ unsigned short c10, unsigned short c11,
+ unsigned short lval0, unsigned short lval1,
+ unsigned short *soln)
+{
+ unsigned short m[2][3];
+ m[0][0] = c00;
+ m[0][1] = c01;
+ m[0][2] = lval0;
+ m[1][0] = c10;
+ m[1][1] = c11;
+ m[1][2] = lval1;
+
+ if (m[0][1] != 0x0) {
+ /* */
+ } else if (m[1][1] != 0x0) {
+ swap_2x3_rows(m);
+ } else {
+ printk(KERN_ERR "Warning: find_2bit_err_coefs, s0,s1 all zeros!\n");
+ }
+
+ solve_2x3(m, soln);
+}
+
+static void swap_2x3_rows(unsigned short m[2][3])
+{
+ unsigned short tmp0;
+ int cnt;
+
+ for (cnt = 0; cnt < 3; cnt++) {
+ tmp0 = m[0][cnt];
+ m[0][cnt] = m[1][cnt];
+ m[1][cnt] = tmp0;
+ }
+}
+
+static void solve_2x3(unsigned short m[2][3], unsigned short *coefs)
+{
+ unsigned short minv;
+
+ minv = gf4096_mul(m[1][1], gf4096_inv(m[0][1]));
+ m[1][0] = m[1][0] ^ gf4096_mul(m[0][0], minv);
+ m[1][2] = m[1][2] ^ gf4096_mul(m[0][2], minv);
+ coefs[0] = gf4096_mul(m[1][2], gf4096_inv(m[1][0]));
+ coefs[1] = gf4096_mul((gf4096_mul(coefs[0], m[0][0]) ^ m[0][2]), gf4096_inv(m[0][1]));
+}
+
+static unsigned char gf64_inv[64] = {
+ 0, 1, 33, 62, 49, 43, 31, 44, 57, 37, 52, 28, 46, 40, 22, 25,
+ 61, 54, 51, 39, 26, 35, 14, 24, 23, 15, 20, 34, 11, 53, 45, 6,
+ 63, 2, 27, 21, 56, 9, 50, 19, 13, 47, 48, 5, 7, 30, 12, 41,
+ 42, 4, 38, 18, 10, 29, 17, 60, 36, 8, 59, 58, 55, 16, 3, 32
+};
+
+static unsigned short gf4096_inv(unsigned short din)
+{
+ unsigned short alahxal, ah2B, deno, inv, bl, bh;
+ unsigned short ah, al, ahxal;
+ unsigned short dout;
+
+ ah = (din >> 6) & 0x3f;
+ al = din & 0x3f;
+ ahxal = ah ^ al;
+ ah2B = (((ah ^ (ah >> 3)) & 0x1) << 5) |
+ ((ah >> 1) & 0x10) |
+ ((((ah >> 5) ^ (ah >> 2)) & 0x1) << 3) |
+ ((ah >> 2) & 0x4) | ((((ah >> 4) ^ (ah >> 1)) & 0x1) << 1) | (ah & 0x1);
+ alahxal = gf64_mul(ahxal, al);
+ deno = alahxal ^ ah2B;
+ inv = gf64_inv[deno];
+ bl = gf64_mul(inv, ahxal);
+ bh = gf64_mul(inv, ah);
+ dout = ((bh & 0x3f) << 6) | (bl & 0x3f);
+ return (((bh & 0x3f) << 6) | (bl & 0x3f));
+}
+
+static unsigned short err_pos_lut[4096] = {
+ 0xfff, 0x000, 0x451, 0xfff, 0xfff, 0x3cf, 0xfff, 0x041,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x28a, 0xfff, 0x492, 0xfff,
+ 0x145, 0xfff, 0xfff, 0x514, 0xfff, 0x082, 0xfff, 0xfff,
+ 0xfff, 0x249, 0x38e, 0x410, 0xfff, 0x104, 0x208, 0x1c7,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x2cb, 0xfff, 0xfff, 0xfff,
+ 0x0c3, 0x34d, 0x4d3, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x186, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x30c, 0x555, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x166, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x385, 0x14e, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4e1,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x538, 0xfff, 0x16d, 0xfff,
+ 0xfff, 0xfff, 0x45b, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x29c, 0x2cc, 0x30b, 0x2b3, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x0b3, 0xfff, 0x2f7,
+ 0xfff, 0x32b, 0xfff, 0xfff, 0xfff, 0xfff, 0x0a7, 0xfff,
+ 0xfff, 0x2da, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x07e, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x11c, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x22f, 0xfff, 0x1f4, 0xfff, 0xfff,
+ 0x2b0, 0x504, 0xfff, 0x114, 0xfff, 0xfff, 0xfff, 0x21d,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x00d, 0x3c4, 0x340, 0x10f,
+ 0xfff, 0xfff, 0x266, 0x02e, 0xfff, 0xfff, 0xfff, 0x4f8,
+ 0x337, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x07b, 0x168, 0xfff, 0xfff, 0x0fe,
+ 0xfff, 0xfff, 0x51a, 0xfff, 0x458, 0xfff, 0x36d, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x073, 0x37d, 0x415, 0x550, 0xfff,
+ 0xfff, 0xfff, 0x23b, 0x4b4, 0xfff, 0xfff, 0xfff, 0x1a1,
+ 0xfff, 0xfff, 0x3aa, 0xfff, 0x117, 0x04d, 0x341, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x518, 0x03e, 0x0f2, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x363, 0xfff, 0x0b9, 0xfff, 0xfff,
+ 0x241, 0xfff, 0xfff, 0x049, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x15f, 0x52d, 0xfff, 0xfff, 0xfff, 0x29e, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x4cf, 0x0fc, 0xfff, 0x36f, 0x3d3, 0xfff,
+ 0x228, 0xfff, 0xfff, 0x45e, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x238, 0xfff, 0xfff, 0xfff, 0xfff, 0x47f, 0xfff, 0xfff,
+ 0x43a, 0x265, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x3e8,
+ 0xfff, 0xfff, 0x01a, 0xfff, 0xfff, 0xfff, 0xfff, 0x21e,
+ 0x1fc, 0x40b, 0xfff, 0xfff, 0xfff, 0x2d0, 0x159, 0xfff,
+ 0xfff, 0x313, 0xfff, 0xfff, 0x05c, 0x4cc, 0xfff, 0xfff,
+ 0x0f6, 0x3d5, 0xfff, 0xfff, 0xfff, 0x54f, 0xfff, 0xfff,
+ 0xfff, 0x172, 0x1e4, 0x07c, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x53c, 0x1ad, 0x535,
+ 0x19b, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x092, 0xfff, 0x2be, 0xfff, 0xfff, 0x482,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x0e6, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x476, 0xfff, 0x51d, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x342, 0x2b5, 0x22e, 0x09a, 0xfff, 0x08d,
+ 0x44f, 0x3ed, 0xfff, 0xfff, 0xfff, 0xfff, 0x3d1, 0xfff,
+ 0xfff, 0x543, 0xfff, 0x48f, 0xfff, 0x3d2, 0xfff, 0x0d5,
+ 0x113, 0x0ec, 0x427, 0xfff, 0xfff, 0xfff, 0x4c4, 0xfff,
+ 0xfff, 0x50a, 0xfff, 0x144, 0xfff, 0x105, 0x39f, 0x294,
+ 0x164, 0xfff, 0x31a, 0xfff, 0xfff, 0x49a, 0xfff, 0x130,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x1be, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x49e, 0x371, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x0e8, 0x49c, 0x0f4, 0xfff,
+ 0x338, 0x1a7, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x36c, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x1ae, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x31b, 0xfff, 0xfff, 0x2dd, 0x522, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x2f4,
+ 0x3c6, 0x30d, 0xfff, 0xfff, 0xfff, 0xfff, 0x34c, 0x18f,
+ 0x30a, 0xfff, 0x01f, 0x079, 0xfff, 0xfff, 0x54d, 0x46b,
+ 0x28c, 0x37f, 0xfff, 0xfff, 0xfff, 0xfff, 0x355, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x14f, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x359, 0x3fe, 0x3c5, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x423, 0xfff, 0xfff, 0x34a, 0x22c, 0xfff,
+ 0x25a, 0xfff, 0xfff, 0x4ad, 0xfff, 0x28d, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x547, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x2e2, 0xfff, 0xfff, 0x1d5, 0xfff, 0x2a8, 0xfff, 0xfff,
+ 0x03f, 0xfff, 0xfff, 0xfff, 0xfff, 0x3eb, 0x0fa, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x55b, 0xfff,
+ 0x08e, 0xfff, 0x3ae, 0xfff, 0x3a4, 0xfff, 0x282, 0x158,
+ 0xfff, 0x382, 0xfff, 0xfff, 0x499, 0xfff, 0xfff, 0x08a,
+ 0xfff, 0xfff, 0xfff, 0x456, 0x3be, 0xfff, 0x1e2, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x559, 0xfff, 0x1a0, 0xfff,
+ 0xfff, 0x0b4, 0xfff, 0xfff, 0xfff, 0x2df, 0xfff, 0xfff,
+ 0xfff, 0x07f, 0x4f5, 0xfff, 0xfff, 0x27c, 0x133, 0x017,
+ 0xfff, 0x3fd, 0xfff, 0xfff, 0xfff, 0x44d, 0x4cd, 0x17a,
+ 0x0d7, 0x537, 0xfff, 0xfff, 0x353, 0xfff, 0xfff, 0x351,
+ 0x366, 0xfff, 0x44a, 0xfff, 0x1a6, 0xfff, 0xfff, 0xfff,
+ 0x291, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1e3,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x389, 0xfff, 0x07a, 0xfff,
+ 0x1b6, 0x2ed, 0xfff, 0xfff, 0xfff, 0xfff, 0x24e, 0x074,
+ 0xfff, 0xfff, 0x3dc, 0xfff, 0x4e3, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x4eb, 0xfff, 0xfff, 0x3b8, 0x4de, 0xfff, 0x19c,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x262,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x076, 0x4e8, 0x3da,
+ 0xfff, 0x531, 0xfff, 0xfff, 0x14a, 0xfff, 0x0a2, 0x433,
+ 0x3df, 0x1e9, 0xfff, 0xfff, 0xfff, 0xfff, 0x3e7, 0x285,
+ 0x2d8, 0xfff, 0xfff, 0xfff, 0x349, 0x18d, 0x098, 0xfff,
+ 0x0df, 0x4bf, 0xfff, 0xfff, 0x0b2, 0xfff, 0x346, 0x24d,
+ 0xfff, 0xfff, 0xfff, 0x24f, 0x4fa, 0x2f9, 0xfff, 0xfff,
+ 0x3c9, 0xfff, 0x2b4, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x056, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x179, 0xfff, 0x0e9, 0x3f0, 0x33d, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x1fd, 0xfff, 0xfff, 0x526, 0xfff,
+ 0xfff, 0xfff, 0x53d, 0xfff, 0xfff, 0xfff, 0x170, 0x331,
+ 0xfff, 0x068, 0xfff, 0xfff, 0xfff, 0x3f7, 0xfff, 0x3d8,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x09f, 0x556, 0xfff, 0xfff, 0x02d, 0xfff, 0xfff,
+ 0x553, 0xfff, 0xfff, 0xfff, 0x1f0, 0xfff, 0xfff, 0x4d6,
+ 0x41e, 0xfff, 0xfff, 0xfff, 0xfff, 0x4d5, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x248, 0xfff, 0xfff, 0xfff, 0x0a3,
+ 0xfff, 0x217, 0xfff, 0xfff, 0xfff, 0x4f1, 0x209, 0xfff,
+ 0xfff, 0x475, 0x234, 0x52b, 0x398, 0xfff, 0x08b, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x2c2, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x268, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x4a3, 0xfff, 0x0aa, 0xfff, 0x1d9, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x155, 0xfff, 0xfff, 0xfff, 0xfff, 0x0bf,
+ 0x539, 0xfff, 0xfff, 0x2f1, 0x545, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x2a7, 0x06f, 0xfff, 0x378, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x25e, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x15d, 0x02a, 0xfff, 0xfff, 0x0bc,
+ 0x235, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x150, 0xfff, 0x1a9, 0xfff, 0xfff, 0xfff, 0xfff, 0x381,
+ 0xfff, 0x04e, 0x270, 0x13f, 0xfff, 0xfff, 0x405, 0xfff,
+ 0x3cd, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x2ef, 0xfff, 0x06a, 0xfff, 0xfff, 0xfff, 0x34f,
+ 0x212, 0xfff, 0xfff, 0x0e2, 0xfff, 0x083, 0x298, 0xfff,
+ 0xfff, 0xfff, 0x0c2, 0xfff, 0xfff, 0x52e, 0xfff, 0x488,
+ 0xfff, 0xfff, 0xfff, 0x36b, 0xfff, 0xfff, 0xfff, 0x442,
+ 0x091, 0xfff, 0x41c, 0xfff, 0xfff, 0x3a5, 0xfff, 0x4e6,
+ 0xfff, 0xfff, 0x40d, 0x31d, 0xfff, 0xfff, 0xfff, 0x4c1,
+ 0x053, 0xfff, 0x418, 0x13c, 0xfff, 0x350, 0xfff, 0x0ae,
+ 0xfff, 0xfff, 0x41f, 0xfff, 0x470, 0xfff, 0x4ca, 0xfff,
+ 0xfff, 0xfff, 0x02b, 0x450, 0xfff, 0x1f8, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x293, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x411, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x0b8, 0xfff, 0xfff, 0xfff,
+ 0x3e1, 0xfff, 0xfff, 0xfff, 0xfff, 0x43c, 0xfff, 0x2b2,
+ 0x2ab, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1ec,
+ 0xfff, 0xfff, 0xfff, 0x3f8, 0x034, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x11a, 0xfff, 0x541, 0x45c, 0x134,
+ 0x1cc, 0xfff, 0xfff, 0xfff, 0x469, 0xfff, 0xfff, 0x44b,
+ 0x161, 0xfff, 0xfff, 0xfff, 0x055, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x307, 0xfff, 0xfff, 0xfff, 0xfff, 0x2d1, 0xfff,
+ 0xfff, 0xfff, 0x124, 0x37b, 0x26b, 0x336, 0xfff, 0xfff,
+ 0x2e4, 0x3cb, 0xfff, 0xfff, 0x0f8, 0x3c8, 0xfff, 0xfff,
+ 0xfff, 0x461, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4b5,
+ 0x2cf, 0xfff, 0xfff, 0xfff, 0x20f, 0xfff, 0x35a, 0xfff,
+ 0x490, 0xfff, 0x185, 0xfff, 0xfff, 0xfff, 0xfff, 0x42e,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x54b, 0xfff, 0xfff, 0xfff,
+ 0x146, 0xfff, 0x412, 0xfff, 0xfff, 0xfff, 0x1ff, 0xfff,
+ 0xfff, 0x3e0, 0xfff, 0xfff, 0xfff, 0xfff, 0x2d5, 0xfff,
+ 0x4df, 0x505, 0xfff, 0x413, 0xfff, 0x1a5, 0xfff, 0x3b2,
+ 0xfff, 0xfff, 0xfff, 0x35b, 0xfff, 0x116, 0xfff, 0xfff,
+ 0x171, 0x4d0, 0xfff, 0x154, 0x12d, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x468, 0x4db, 0xfff,
+ 0xfff, 0x1df, 0xfff, 0xfff, 0xfff, 0xfff, 0x05a, 0xfff,
+ 0x0f1, 0x403, 0xfff, 0x22b, 0x2e0, 0xfff, 0xfff, 0xfff,
+ 0x2b7, 0x373, 0xfff, 0xfff, 0xfff, 0xfff, 0x13e, 0xfff,
+ 0xfff, 0xfff, 0x0d0, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x329, 0x1d2, 0x3fa, 0x047, 0xfff, 0x2f2, 0xfff, 0xfff,
+ 0x141, 0x0ac, 0x1d7, 0xfff, 0x07d, 0xfff, 0xfff, 0xfff,
+ 0x1c1, 0xfff, 0x487, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x045, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x288, 0x0cd, 0xfff, 0xfff, 0xfff, 0xfff, 0x226, 0x1d8,
+ 0xfff, 0x153, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4cb,
+ 0x528, 0xfff, 0xfff, 0xfff, 0x20a, 0x343, 0x3a1, 0xfff,
+ 0xfff, 0xfff, 0x2d7, 0x2d3, 0x1aa, 0x4c5, 0xfff, 0xfff,
+ 0xfff, 0x42b, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3e9, 0xfff, 0x20b, 0x260,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x37c, 0x2fd,
+ 0xfff, 0xfff, 0x2c8, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x31e, 0xfff, 0x335, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x135, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x35c, 0x4dd, 0x129, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x1ef, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x34e, 0xfff, 0xfff, 0xfff, 0xfff, 0x407, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3ad, 0xfff, 0xfff, 0xfff,
+ 0x379, 0xfff, 0xfff, 0x1d0, 0x38d, 0xfff, 0xfff, 0x1e8,
+ 0x184, 0x3c1, 0x1c4, 0xfff, 0x1f9, 0xfff, 0xfff, 0x424,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x1d3, 0x0d4, 0xfff, 0x4e9,
+ 0xfff, 0xfff, 0xfff, 0x530, 0x107, 0xfff, 0x106, 0x04f,
+ 0xfff, 0xfff, 0x4c7, 0x503, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x15c, 0xfff, 0x23f, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x4f3, 0xfff, 0xfff, 0x3c7,
+ 0xfff, 0x278, 0xfff, 0xfff, 0x0a6, 0xfff, 0xfff, 0xfff,
+ 0x122, 0x1cf, 0xfff, 0x327, 0xfff, 0x2e5, 0xfff, 0x29d,
+ 0xfff, 0xfff, 0x3f1, 0xfff, 0xfff, 0x48d, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x054, 0xfff, 0xfff, 0xfff, 0xfff, 0x178,
+ 0x27e, 0x4e0, 0x352, 0x02f, 0x09c, 0xfff, 0x2a0, 0xfff,
+ 0xfff, 0x46a, 0x457, 0xfff, 0xfff, 0x501, 0xfff, 0x2ba,
+ 0xfff, 0xfff, 0xfff, 0x54e, 0x2e7, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x551, 0xfff, 0xfff, 0x1db, 0x2aa, 0xfff,
+ 0xfff, 0x4bc, 0xfff, 0xfff, 0x395, 0xfff, 0x0de, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x455, 0xfff, 0x17e,
+ 0xfff, 0x221, 0x4a7, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x388, 0xfff, 0xfff, 0xfff, 0x308, 0xfff, 0xfff, 0xfff,
+ 0x20e, 0x4b9, 0xfff, 0x273, 0x20c, 0x09e, 0xfff, 0x057,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3f2, 0xfff, 0x1a8, 0x3a6,
+ 0x14c, 0xfff, 0xfff, 0x071, 0xfff, 0xfff, 0x53a, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x109, 0xfff, 0xfff, 0x399, 0xfff,
+ 0x061, 0x4f0, 0x39e, 0x244, 0xfff, 0x035, 0xfff, 0xfff,
+ 0x305, 0x47e, 0x297, 0xfff, 0xfff, 0x2b8, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1bc, 0xfff, 0x2fc,
+ 0xfff, 0xfff, 0x554, 0xfff, 0xfff, 0xfff, 0xfff, 0x3b6,
+ 0xfff, 0xfff, 0xfff, 0x515, 0x397, 0xfff, 0xfff, 0x12f,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4e5,
+ 0xfff, 0x4fc, 0xfff, 0xfff, 0x05e, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x0a8, 0x3af, 0x015, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x138, 0xfff, 0xfff, 0xfff, 0x540, 0xfff, 0xfff,
+ 0xfff, 0x027, 0x523, 0x2f0, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x16c, 0xfff, 0x27d, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x04c, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4dc,
+ 0xfff, 0xfff, 0x059, 0x301, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x1a3, 0xfff, 0x15a, 0xfff, 0xfff,
+ 0x0a5, 0xfff, 0x435, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x051, 0xfff, 0xfff, 0x131, 0xfff, 0x4f4, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x441, 0xfff, 0x4fb, 0xfff, 0x03b,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1ed, 0x274,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x0d3, 0x55e, 0x1b3,
+ 0xfff, 0x0bd, 0xfff, 0xfff, 0xfff, 0xfff, 0x225, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x4b7, 0xfff, 0xfff, 0x2ff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4c3, 0xfff,
+ 0x383, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x2f6,
+ 0xfff, 0xfff, 0x1ee, 0xfff, 0x03d, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x26f, 0x1dc, 0xfff, 0x0db, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x0ce, 0xfff, 0xfff, 0x127, 0x03a,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x311, 0xfff,
+ 0xfff, 0x13d, 0x09d, 0x47b, 0x2a6, 0x50d, 0x510, 0x19a,
+ 0xfff, 0x354, 0x414, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x44c, 0x3b0, 0xfff, 0x23d, 0x429, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x4c0, 0x416, 0xfff, 0x05b, 0xfff, 0xfff, 0x137, 0xfff,
+ 0x25f, 0x49f, 0xfff, 0x279, 0x013, 0xfff, 0xfff, 0xfff,
+ 0x269, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x3d0, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x077, 0xfff, 0xfff, 0x3fb,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x271, 0x3a0, 0xfff, 0xfff,
+ 0x40f, 0xfff, 0xfff, 0x3de, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1ab, 0x26a,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x489, 0xfff, 0xfff,
+ 0x252, 0xfff, 0xfff, 0xfff, 0xfff, 0x1b7, 0x42f, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x3b7,
+ 0xfff, 0x2bb, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x0f7, 0x01d, 0xfff, 0x067, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x4e2, 0xfff, 0xfff, 0x4bb, 0xfff,
+ 0xfff, 0xfff, 0x17b, 0xfff, 0x0ee, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x36e, 0xfff, 0xfff, 0xfff, 0x533, 0xfff,
+ 0xfff, 0xfff, 0x4d4, 0x356, 0xfff, 0xfff, 0x375, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x4a4, 0x513, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4ff, 0xfff, 0x2af,
+ 0xfff, 0xfff, 0x026, 0xfff, 0x0ad, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x26e, 0xfff, 0xfff, 0xfff, 0xfff, 0x493, 0xfff,
+ 0x463, 0x4d2, 0x4be, 0xfff, 0xfff, 0xfff, 0xfff, 0x4f2,
+ 0x0b6, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x32d, 0x315, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x13a, 0x4a1, 0xfff, 0x27a, 0xfff, 0xfff, 0xfff,
+ 0x47a, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x334, 0xfff, 0xfff, 0xfff, 0xfff, 0x54c, 0xfff, 0xfff,
+ 0xfff, 0x0c9, 0x007, 0xfff, 0xfff, 0x12e, 0xfff, 0x0ff,
+ 0xfff, 0xfff, 0x3f5, 0x509, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x1c3, 0x2ad, 0xfff, 0xfff, 0x47c, 0x261, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x152, 0xfff, 0xfff, 0xfff, 0x339,
+ 0xfff, 0x243, 0x1c0, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x063, 0xfff, 0xfff, 0x254, 0xfff, 0xfff, 0x173, 0xfff,
+ 0x0c7, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x362, 0x259, 0x485, 0x374, 0x0dc, 0x3ab, 0xfff,
+ 0x1c5, 0x534, 0x544, 0xfff, 0xfff, 0x508, 0xfff, 0x402,
+ 0x408, 0xfff, 0x0e7, 0xfff, 0xfff, 0x00a, 0x205, 0xfff,
+ 0xfff, 0x2b9, 0xfff, 0xfff, 0xfff, 0x465, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x23a, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x147, 0x19d, 0x115, 0x214, 0xfff, 0x090, 0x368,
+ 0xfff, 0x210, 0xfff, 0xfff, 0x280, 0x52a, 0x163, 0x148,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x326, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x2de, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x206, 0x2c1, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x189, 0xfff, 0xfff, 0xfff, 0xfff, 0x367, 0xfff, 0x1a4,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x443, 0xfff, 0x27b,
+ 0xfff, 0xfff, 0x251, 0x549, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x188, 0x04b, 0xfff, 0xfff, 0xfff, 0x31f,
+ 0x4a6, 0xfff, 0x246, 0x1de, 0x156, 0xfff, 0xfff, 0xfff,
+ 0x3a9, 0xfff, 0xfff, 0xfff, 0x2fa, 0xfff, 0x128, 0x0d1,
+ 0x449, 0x255, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x258, 0xfff, 0xfff, 0xfff,
+ 0x532, 0xfff, 0xfff, 0xfff, 0x303, 0x517, 0xfff, 0xfff,
+ 0x2a9, 0x24a, 0xfff, 0xfff, 0x231, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x4b6, 0x516, 0xfff, 0xfff, 0x0e4, 0x0eb,
+ 0xfff, 0x4e4, 0xfff, 0x275, 0xfff, 0xfff, 0x031, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x025, 0x21a, 0xfff, 0x0cc,
+ 0x45f, 0x3d9, 0x289, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x23e, 0xfff, 0xfff, 0xfff, 0x438, 0x097,
+ 0x419, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x0a9, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x37e, 0x0e0, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x431,
+ 0x372, 0xfff, 0xfff, 0xfff, 0x1ba, 0x06e, 0xfff, 0x1b1,
+ 0xfff, 0xfff, 0x12a, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x193, 0xfff, 0xfff, 0xfff, 0xfff, 0x10a,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x048, 0x1b4,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x295, 0x140, 0x108, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x16f, 0xfff, 0x0a4, 0x37a, 0xfff,
+ 0x29a, 0xfff, 0x284, 0xfff, 0xfff, 0xfff, 0xfff, 0x4c6,
+ 0x2a2, 0x3a3, 0xfff, 0x201, 0xfff, 0xfff, 0xfff, 0x4bd,
+ 0x005, 0x54a, 0x3b5, 0x204, 0x2ee, 0x11d, 0x436, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3ec, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x11f, 0x498, 0x21c, 0xfff,
+ 0xfff, 0xfff, 0x3d6, 0xfff, 0x4ab, 0xfff, 0x432, 0x2eb,
+ 0x542, 0x4fd, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x4ce, 0xfff, 0xfff, 0x2fb, 0xfff,
+ 0xfff, 0x2e1, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x1b9, 0x037, 0x0dd,
+ 0xfff, 0xfff, 0xfff, 0x2bf, 0x521, 0x496, 0x095, 0xfff,
+ 0xfff, 0x328, 0x070, 0x1bf, 0xfff, 0x393, 0xfff, 0xfff,
+ 0x102, 0xfff, 0xfff, 0x21b, 0xfff, 0x142, 0x263, 0x519,
+ 0xfff, 0x2a5, 0x177, 0xfff, 0x14d, 0x471, 0x4ae, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x1f6, 0xfff, 0x481, 0xfff, 0xfff, 0xfff, 0x151, 0xfff,
+ 0xfff, 0xfff, 0x085, 0x33f, 0xfff, 0xfff, 0xfff, 0x084,
+ 0xfff, 0xfff, 0xfff, 0x345, 0x3a2, 0xfff, 0xfff, 0x0a0,
+ 0x0da, 0x024, 0xfff, 0xfff, 0xfff, 0x1bd, 0xfff, 0x55c,
+ 0x467, 0x445, 0xfff, 0xfff, 0xfff, 0x052, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x51e, 0xfff, 0xfff, 0x39d, 0xfff, 0x35f,
+ 0xfff, 0x376, 0x3ee, 0xfff, 0xfff, 0xfff, 0xfff, 0x448,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x16a,
+ 0xfff, 0x036, 0x38f, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x211,
+ 0xfff, 0xfff, 0xfff, 0x230, 0xfff, 0xfff, 0x3ba, 0xfff,
+ 0xfff, 0xfff, 0x3ce, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x229, 0xfff, 0x176, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x00b, 0xfff, 0x162, 0x018, 0xfff,
+ 0xfff, 0x233, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x400, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x12b, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x3f4, 0xfff, 0x0f0, 0xfff, 0x1ac, 0xfff, 0xfff,
+ 0x119, 0xfff, 0x2c0, 0xfff, 0xfff, 0xfff, 0x49b, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x23c, 0xfff,
+ 0x4b3, 0x010, 0x064, 0xfff, 0xfff, 0x4ba, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x3c2, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x006, 0x196, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x100, 0x191, 0xfff,
+ 0x1ea, 0x29f, 0xfff, 0xfff, 0xfff, 0x276, 0xfff, 0xfff,
+ 0x2b1, 0x3b9, 0xfff, 0x03c, 0xfff, 0xfff, 0xfff, 0x180,
+ 0xfff, 0x08f, 0xfff, 0xfff, 0x19e, 0x019, 0xfff, 0x0b0,
+ 0x0fd, 0x332, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x06b, 0x2e8, 0xfff, 0x446, 0xfff, 0xfff, 0x004,
+ 0x247, 0x197, 0xfff, 0x112, 0x169, 0x292, 0xfff, 0x302,
+ 0xfff, 0xfff, 0x33b, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x287, 0x21f, 0xfff, 0x3ea, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x4e7, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x3a8, 0xfff, 0xfff, 0x2bc, 0xfff,
+ 0x484, 0x296, 0xfff, 0x1c9, 0x08c, 0x1e5, 0x48a, 0xfff,
+ 0x360, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x1ca, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x10d, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x066, 0x2ea, 0x28b, 0x25b, 0xfff, 0x072,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x2b6, 0xfff, 0xfff, 0x272,
+ 0xfff, 0xfff, 0x525, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x2ca, 0xfff, 0xfff, 0xfff, 0x299, 0xfff, 0xfff, 0xfff,
+ 0x558, 0x41a, 0xfff, 0x4f7, 0x557, 0xfff, 0x4a0, 0x344,
+ 0x12c, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x125,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x40e, 0xfff, 0xfff, 0x502, 0xfff, 0x103, 0x3e6, 0xfff,
+ 0x527, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x45d, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x44e, 0xfff, 0xfff, 0xfff, 0xfff, 0x0d2, 0x4c9, 0x35e,
+ 0x459, 0x2d9, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x17d,
+ 0x0c4, 0xfff, 0xfff, 0xfff, 0x3ac, 0x390, 0x094, 0xfff,
+ 0x483, 0x0ab, 0xfff, 0x253, 0xfff, 0x391, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x123, 0x0ef, 0xfff, 0xfff, 0xfff, 0x330,
+ 0x38c, 0xfff, 0xfff, 0x2ae, 0xfff, 0xfff, 0xfff, 0x042,
+ 0x012, 0x06d, 0xfff, 0xfff, 0xfff, 0x32a, 0x3db, 0x364,
+ 0x2dc, 0xfff, 0x30f, 0x3d7, 0x4a5, 0x050, 0xfff, 0xfff,
+ 0x029, 0xfff, 0xfff, 0xfff, 0xfff, 0x1d1, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x480, 0xfff,
+ 0x4ed, 0x081, 0x0a1, 0xfff, 0xfff, 0xfff, 0x30e, 0x52f,
+ 0x257, 0xfff, 0xfff, 0x447, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x401, 0x3cc, 0xfff, 0xfff, 0x0fb,
+ 0x2c9, 0x42a, 0x314, 0x33e, 0x3bd, 0x318, 0xfff, 0x10e,
+ 0x2a1, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x24c,
+ 0x506, 0xfff, 0x267, 0xfff, 0xfff, 0x219, 0xfff, 0x1eb,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x309, 0x3e2, 0x46c, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x384, 0xfff, 0xfff, 0xfff, 0xfff, 0x50c, 0xfff, 0x24b,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x038,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x194,
+ 0x143, 0x3e3, 0xfff, 0xfff, 0xfff, 0x4c2, 0xfff, 0xfff,
+ 0x0e1, 0x25c, 0xfff, 0x237, 0xfff, 0x1fe, 0xfff, 0xfff,
+ 0xfff, 0x065, 0x2a4, 0xfff, 0x386, 0x55a, 0x11b, 0xfff,
+ 0xfff, 0x192, 0xfff, 0x183, 0x00e, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x4b2, 0x18e, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x486, 0x4ef, 0x0c6, 0x380, 0xfff, 0x4a8, 0xfff,
+ 0x0c5, 0xfff, 0xfff, 0xfff, 0xfff, 0x093, 0x1b8, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x2e6,
+ 0xfff, 0x0f3, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x28e, 0xfff, 0x53b, 0x420, 0x22a, 0x33a, 0xfff, 0x387,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x2a3, 0xfff, 0xfff,
+ 0xfff, 0x428, 0x500, 0xfff, 0xfff, 0x120, 0x2c6, 0x290,
+ 0x2f5, 0x0e3, 0xfff, 0x0b7, 0xfff, 0x319, 0x474, 0xfff,
+ 0xfff, 0xfff, 0x529, 0x014, 0xfff, 0x41b, 0x40a, 0x18b,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x0d9,
+ 0xfff, 0x38a, 0xfff, 0xfff, 0xfff, 0xfff, 0x1ce, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3b1, 0xfff, 0xfff, 0x05d,
+ 0x2c4, 0xfff, 0xfff, 0x4af, 0xfff, 0x030, 0xfff, 0xfff,
+ 0x203, 0xfff, 0x277, 0x256, 0xfff, 0xfff, 0xfff, 0x4f9,
+ 0xfff, 0x2c7, 0xfff, 0x466, 0x016, 0x1cd, 0xfff, 0x167,
+ 0xfff, 0xfff, 0x0c8, 0xfff, 0x43d, 0xfff, 0xfff, 0x020,
+ 0xfff, 0xfff, 0x232, 0x1cb, 0x1e0, 0xfff, 0xfff, 0x347,
+ 0xfff, 0x478, 0xfff, 0x365, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x358, 0xfff, 0x10b, 0xfff, 0x35d, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x452, 0x22d, 0xfff, 0xfff, 0x47d, 0xfff,
+ 0x2f3, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x460, 0xfff,
+ 0xfff, 0xfff, 0x50b, 0xfff, 0xfff, 0xfff, 0x2ec, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x4b1, 0x422, 0xfff, 0xfff,
+ 0xfff, 0x2d4, 0xfff, 0x239, 0xfff, 0xfff, 0xfff, 0x439,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x491, 0x075, 0xfff, 0xfff, 0xfff, 0x06c, 0xfff,
+ 0xfff, 0x0f9, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x139, 0xfff, 0x4f6, 0xfff, 0xfff, 0x409, 0xfff,
+ 0xfff, 0x15b, 0xfff, 0xfff, 0x348, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x4a2, 0x49d, 0xfff, 0x033, 0x175, 0xfff, 0x039,
+ 0xfff, 0x312, 0x40c, 0xfff, 0xfff, 0x325, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x4aa, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0x165, 0x3bc, 0x48c, 0x310, 0x096,
+ 0xfff, 0xfff, 0x250, 0x1a2, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x20d, 0x2ac, 0xfff, 0xfff, 0x39b, 0xfff, 0x377, 0xfff,
+ 0x512, 0x495, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x357, 0x4ea, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x198, 0xfff, 0xfff, 0xfff, 0x434, 0x04a,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x062, 0xfff, 0x1d6, 0x1c8,
+ 0xfff, 0x1f3, 0x281, 0xfff, 0x462, 0xfff, 0xfff, 0xfff,
+ 0x4b0, 0xfff, 0x207, 0xfff, 0xfff, 0xfff, 0xfff, 0x3dd,
+ 0xfff, 0xfff, 0x55d, 0xfff, 0x552, 0x494, 0x1af, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x227, 0xfff, 0xfff, 0x069,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x43e,
+ 0x0b5, 0xfff, 0x524, 0x2d2, 0xfff, 0xfff, 0xfff, 0x28f,
+ 0xfff, 0x01b, 0x50e, 0xfff, 0xfff, 0x1bb, 0xfff, 0xfff,
+ 0x41d, 0xfff, 0x32e, 0x48e, 0xfff, 0x1f7, 0x224, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x394, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x52c, 0xfff, 0xfff, 0xfff, 0x392, 0xfff, 0x1e7,
+ 0xfff, 0xfff, 0x3f9, 0x3a7, 0xfff, 0x51f, 0xfff, 0x0bb,
+ 0x118, 0x3ca, 0xfff, 0x1dd, 0xfff, 0x48b, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x50f, 0xfff, 0x0d6, 0xfff, 0x1fa, 0xfff,
+ 0x11e, 0xfff, 0xfff, 0xfff, 0xfff, 0x4d7, 0xfff, 0x078,
+ 0x008, 0xfff, 0x25d, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x032, 0x33c, 0xfff, 0x4d9, 0x160, 0xfff, 0xfff, 0x300,
+ 0x0b1, 0xfff, 0x322, 0xfff, 0x4ec, 0xfff, 0xfff, 0x200,
+ 0x00c, 0x369, 0x473, 0xfff, 0xfff, 0x32c, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x53e, 0x3d4, 0x417, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x34b, 0x001, 0x39a, 0x02c, 0xfff, 0xfff, 0x2ce, 0x00f,
+ 0xfff, 0x0ba, 0xfff, 0xfff, 0xfff, 0xfff, 0x060, 0xfff,
+ 0x406, 0xfff, 0xfff, 0xfff, 0x4ee, 0x4ac, 0xfff, 0x43f,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x29b, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x216,
+ 0x190, 0xfff, 0x396, 0x464, 0xfff, 0xfff, 0x323, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x2e9, 0xfff, 0x26d,
+ 0x2cd, 0x040, 0xfff, 0xfff, 0xfff, 0xfff, 0x38b, 0x3c0,
+ 0xfff, 0xfff, 0xfff, 0x1f2, 0xfff, 0x0ea, 0xfff, 0xfff,
+ 0x472, 0xfff, 0x1fb, 0xfff, 0xfff, 0x0af, 0x27f, 0xfff,
+ 0xfff, 0xfff, 0x479, 0x023, 0xfff, 0x0d8, 0x3b3, 0xfff,
+ 0xfff, 0xfff, 0x121, 0xfff, 0xfff, 0x3bf, 0xfff, 0xfff,
+ 0x16b, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x45a, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x0be, 0xfff, 0xfff, 0xfff, 0x111, 0xfff, 0x220,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x09b, 0x218, 0xfff, 0x022, 0x202, 0xfff,
+ 0x4c8, 0xfff, 0x0ed, 0xfff, 0xfff, 0x182, 0xfff, 0xfff,
+ 0xfff, 0x17f, 0x213, 0xfff, 0x321, 0x36a, 0xfff, 0x086,
+ 0xfff, 0xfff, 0xfff, 0x43b, 0x088, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x26c, 0xfff, 0x2f8, 0x3b4, 0xfff, 0xfff, 0xfff,
+ 0x132, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x333, 0x444,
+ 0x0c1, 0x4d8, 0x46d, 0x264, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x426, 0xfff, 0xfff, 0xfff, 0xfff, 0x2fe, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x011, 0xfff, 0x05f, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0x10c, 0x101, 0xfff, 0xfff, 0xfff, 0xfff, 0x110,
+ 0xfff, 0x044, 0x304, 0x361, 0x404, 0xfff, 0x51b, 0x099,
+ 0xfff, 0x440, 0xfff, 0xfff, 0xfff, 0x222, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0x1b5, 0xfff, 0x136, 0x430, 0xfff, 0x1da,
+ 0xfff, 0xfff, 0xfff, 0x043, 0xfff, 0x17c, 0xfff, 0xfff,
+ 0xfff, 0x01c, 0xfff, 0xfff, 0xfff, 0x425, 0x236, 0xfff,
+ 0x317, 0xfff, 0xfff, 0x437, 0x3fc, 0xfff, 0x1f1, 0xfff,
+ 0x324, 0xfff, 0xfff, 0x0ca, 0x306, 0xfff, 0x548, 0xfff,
+ 0x46e, 0xfff, 0xfff, 0xfff, 0x4b8, 0x1c2, 0x286, 0xfff,
+ 0xfff, 0x087, 0x18a, 0x19f, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x18c, 0xfff, 0x215, 0xfff, 0xfff, 0xfff, 0xfff, 0x283,
+ 0xfff, 0xfff, 0xfff, 0x126, 0xfff, 0xfff, 0x370, 0xfff,
+ 0x53f, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0x31c, 0xfff,
+ 0x4d1, 0xfff, 0xfff, 0xfff, 0x021, 0xfff, 0x157, 0xfff,
+ 0xfff, 0x028, 0x16e, 0xfff, 0x421, 0xfff, 0x1c6, 0xfff,
+ 0xfff, 0x511, 0xfff, 0xfff, 0x39c, 0x46f, 0x1b2, 0xfff,
+ 0xfff, 0x316, 0xfff, 0xfff, 0x009, 0xfff, 0xfff, 0x195,
+ 0xfff, 0x240, 0x546, 0xfff, 0xfff, 0x520, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x454, 0xfff, 0xfff, 0xfff,
+ 0x3f3, 0xfff, 0xfff, 0x187, 0xfff, 0x4a9, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x51c, 0x453, 0x1e6, 0xfff,
+ 0xfff, 0xfff, 0x1b0, 0xfff, 0x477, 0xfff, 0xfff, 0xfff,
+ 0x4fe, 0xfff, 0x32f, 0xfff, 0xfff, 0x15e, 0x1d4, 0xfff,
+ 0x0e5, 0xfff, 0xfff, 0xfff, 0x242, 0x14b, 0x046, 0xfff,
+ 0x3f6, 0x3bb, 0x3e4, 0xfff, 0xfff, 0x2e3, 0xfff, 0x245,
+ 0xfff, 0x149, 0xfff, 0xfff, 0xfff, 0x2db, 0xfff, 0xfff,
+ 0x181, 0xfff, 0x089, 0x2c5, 0xfff, 0x1f5, 0xfff, 0x2d6,
+ 0x507, 0xfff, 0x42d, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0x080, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff,
+ 0xfff, 0xfff, 0xfff, 0xfff, 0x3c3, 0x320, 0xfff, 0x1e1,
+ 0xfff, 0x0f5, 0x13b, 0xfff, 0xfff, 0xfff, 0x003, 0x4da,
+ 0xfff, 0xfff, 0xfff, 0x42c, 0xfff, 0xfff, 0x0cb, 0xfff,
+ 0x536, 0x2c3, 0xfff, 0xfff, 0xfff, 0xfff, 0x199, 0xfff,
+ 0xfff, 0x0c0, 0xfff, 0x01e, 0x497, 0xfff, 0xfff, 0x3e5,
+ 0xfff, 0xfff, 0xfff, 0x0cf, 0xfff, 0x2bd, 0xfff, 0x223,
+ 0xfff, 0x3ff, 0xfff, 0x058, 0x174, 0x3ef, 0xfff, 0x002
+};
+
+static unsigned short err_pos(unsigned short din)
+{
+ BUG_ON(din > 4096);
+ return err_pos_lut[din];
+}
+static int chk_no_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
+{
+ if ((chk_syndrome_list[0] | chk_syndrome_list[1] |
+ chk_syndrome_list[2] | chk_syndrome_list[3] |
+ chk_syndrome_list[4] | chk_syndrome_list[5] |
+ chk_syndrome_list[6] | chk_syndrome_list[7]) != 0x0) {
+ return -EINVAL;
+ } else {
+ err_info[0] = 0x0;
+ return 0;
+ }
+}
+static int chk_1_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
+{
+ unsigned short tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+ tmp0 = gf4096_mul(chk_syndrome_list[1], gf4096_inv(chk_syndrome_list[0]));
+ tmp1 = gf4096_mul(chk_syndrome_list[2], gf4096_inv(chk_syndrome_list[1]));
+ tmp2 = gf4096_mul(chk_syndrome_list[3], gf4096_inv(chk_syndrome_list[2]));
+ tmp3 = gf4096_mul(chk_syndrome_list[4], gf4096_inv(chk_syndrome_list[3]));
+ tmp4 = gf4096_mul(chk_syndrome_list[5], gf4096_inv(chk_syndrome_list[4]));
+ tmp5 = gf4096_mul(chk_syndrome_list[6], gf4096_inv(chk_syndrome_list[5]));
+ tmp6 = gf4096_mul(chk_syndrome_list[7], gf4096_inv(chk_syndrome_list[6]));
+ if ((tmp0 == tmp1) & (tmp1 == tmp2) & (tmp2 == tmp3) & (tmp3 == tmp4) & (tmp4 == tmp5) & (tmp5 == tmp6)) {
+ err_info[0] = 0x1; // encode 1-symbol error as 0x1
+ err_info[1] = err_pos(tmp0);
+ err_info[1] = (unsigned short)(0x55e - err_info[1]);
+ err_info[5] = chk_syndrome_list[0];
+ return 0;
+ } else
+ return -EINVAL;
+}
+static int chk_2_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
+{
+ unsigned short tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+ unsigned short coefs[4];
+ unsigned short err_pats[4];
+ int found_num_root = 0;
+ unsigned short bit2_root0, bit2_root1;
+ unsigned short bit2_root0_inv, bit2_root1_inv;
+ unsigned short err_loc_eqn, test_root;
+ unsigned short bit2_loc0, bit2_loc1;
+ unsigned short bit2_pat0, bit2_pat1;
+
+ find_2x2_soln(chk_syndrome_list[1],
+ chk_syndrome_list[0],
+ chk_syndrome_list[2], chk_syndrome_list[1], chk_syndrome_list[2], chk_syndrome_list[3], coefs);
+ for (test_root = 0x1; test_root < 0xfff; test_root++) {
+ err_loc_eqn =
+ gf4096_mul(coefs[1], gf4096_mul(test_root, test_root)) ^ gf4096_mul(coefs[0], test_root) ^ 0x1;
+ if (err_loc_eqn == 0x0) {
+ if (found_num_root == 0) {
+ bit2_root0 = test_root;
+ found_num_root = 1;
+ } else if (found_num_root == 1) {
+ bit2_root1 = test_root;
+ found_num_root = 2;
+ break;
+ }
+ }
+ }
+ if (found_num_root != 2)
+ return -EINVAL;
+ else {
+ bit2_root0_inv = gf4096_inv(bit2_root0);
+ bit2_root1_inv = gf4096_inv(bit2_root1);
+ find_2bit_err_pats(chk_syndrome_list[0],
+ chk_syndrome_list[1], bit2_root0_inv, bit2_root1_inv, err_pats);
+ bit2_pat0 = err_pats[0];
+ bit2_pat1 = err_pats[1];
+ //for(x+1)
+ tmp0 = gf4096_mul(gf4096_mul(bit2_root0_inv, bit2_root0_inv), gf4096_mul(bit2_root0_inv, bit2_root0_inv)); //rinv0^4
+ tmp1 = gf4096_mul(bit2_root0_inv, tmp0); //rinv0^5
+ tmp2 = gf4096_mul(bit2_root0_inv, tmp1); //rinv0^6
+ tmp3 = gf4096_mul(bit2_root0_inv, tmp2); //rinv0^7
+ tmp4 = gf4096_mul(gf4096_mul(bit2_root1_inv, bit2_root1_inv), gf4096_mul(bit2_root1_inv, bit2_root1_inv)); //rinv1^4
+ tmp5 = gf4096_mul(bit2_root1_inv, tmp4); //rinv1^5
+ tmp6 = gf4096_mul(bit2_root1_inv, tmp5); //rinv1^6
+ tmp7 = gf4096_mul(bit2_root1_inv, tmp6); //rinv1^7
+ //check if only 2-bit error
+ if ((chk_syndrome_list[4] ==
+ (gf4096_mul(bit2_pat0, tmp0) ^
+ gf4096_mul(bit2_pat1,
+ tmp4))) & (chk_syndrome_list[5] ==
+ (gf4096_mul(bit2_pat0, tmp1) ^
+ gf4096_mul(bit2_pat1,
+ tmp5))) &
+ (chk_syndrome_list[6] ==
+ (gf4096_mul(bit2_pat0, tmp2) ^
+ gf4096_mul(bit2_pat1,
+ tmp6))) & (chk_syndrome_list[7] ==
+ (gf4096_mul(bit2_pat0, tmp3) ^ gf4096_mul(bit2_pat1, tmp7)))) {
+ if ((err_pos(bit2_root0_inv) == 0xfff) | (err_pos(bit2_root1_inv) == 0xfff)) {
+ return -EINVAL;
+ } else {
+ bit2_loc0 = 0x55e - err_pos(bit2_root0_inv);
+ bit2_loc1 = 0x55e - err_pos(bit2_root1_inv);
+ err_info[0] = 0x2; // encode 2-symbol error as 0x2
+ err_info[1] = bit2_loc0;
+ err_info[2] = bit2_loc1;
+ err_info[5] = bit2_pat0;
+ err_info[6] = bit2_pat1;
+ return 0;
+ }
+ } else
+ return -EINVAL;
+ }
+}
+static int chk_3_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
+{
+ unsigned short tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+ unsigned short coefs[4];
+ unsigned short err_pats[4];
+ int found_num_root = 0;
+ unsigned short bit3_root0, bit3_root1, bit3_root2;
+ unsigned short bit3_root0_inv, bit3_root1_inv, bit3_root2_inv;
+ unsigned short err_loc_eqn, test_root;
+
+ find_3bit_err_coefs(chk_syndrome_list[0], chk_syndrome_list[1],
+ chk_syndrome_list[2], chk_syndrome_list[3],
+ chk_syndrome_list[4], chk_syndrome_list[5], coefs);
+
+ for (test_root = 0x1; test_root < 0xfff; test_root++) {
+ err_loc_eqn = gf4096_mul(coefs[2],
+ gf4096_mul(gf4096_mul(test_root, test_root),
+ test_root)) ^ gf4096_mul(coefs[1], gf4096_mul(test_root, test_root))
+ ^ gf4096_mul(coefs[0], test_root) ^ 0x1;
+
+ if (err_loc_eqn == 0x0) {
+ if (found_num_root == 0) {
+ bit3_root0 = test_root;
+ found_num_root = 1;
+ } else if (found_num_root == 1) {
+ bit3_root1 = test_root;
+ found_num_root = 2;
+ } else if (found_num_root == 2) {
+ bit3_root2 = test_root;
+ found_num_root = 3;
+ break;
+ }
+ }
+ }
+ if (found_num_root != 3)
+ return -EINVAL;
+ else {
+ bit3_root0_inv = gf4096_inv(bit3_root0);
+ bit3_root1_inv = gf4096_inv(bit3_root1);
+ bit3_root2_inv = gf4096_inv(bit3_root2);
+
+ find_3bit_err_pats(chk_syndrome_list[0], chk_syndrome_list[1],
+ chk_syndrome_list[2], bit3_root0_inv,
+ bit3_root1_inv, bit3_root2_inv, err_pats);
+
+ //check if only 3-bit error
+ tmp0 = gf4096_mul(bit3_root0_inv, bit3_root0_inv);
+ tmp0 = gf4096_mul(tmp0, tmp0);
+ tmp0 = gf4096_mul(tmp0, bit3_root0_inv);
+ tmp0 = gf4096_mul(tmp0, bit3_root0_inv); //rinv0^6
+ tmp1 = gf4096_mul(tmp0, bit3_root0_inv); //rinv0^7
+ tmp2 = gf4096_mul(bit3_root1_inv, bit3_root1_inv);
+ tmp2 = gf4096_mul(tmp2, tmp2);
+ tmp2 = gf4096_mul(tmp2, bit3_root1_inv);
+ tmp2 = gf4096_mul(tmp2, bit3_root1_inv); //rinv1^6
+ tmp3 = gf4096_mul(tmp2, bit3_root1_inv); //rinv1^7
+ tmp4 = gf4096_mul(bit3_root2_inv, bit3_root2_inv);
+ tmp4 = gf4096_mul(tmp4, tmp4);
+ tmp4 = gf4096_mul(tmp4, bit3_root2_inv);
+ tmp4 = gf4096_mul(tmp4, bit3_root2_inv); //rinv2^6
+ tmp5 = gf4096_mul(tmp4, bit3_root2_inv); //rinv2^7
+
+ //check if only 3 errors
+ if ((chk_syndrome_list[6] == (gf4096_mul(err_pats[0], tmp0) ^
+ gf4096_mul(err_pats[1], tmp2) ^
+ gf4096_mul(err_pats[2], tmp4))) &
+ (chk_syndrome_list[7] == (gf4096_mul(err_pats[0], tmp1) ^
+ gf4096_mul(err_pats[1], tmp3) ^ gf4096_mul(err_pats[2], tmp5)))) {
+ if ((err_pos(bit3_root0_inv) == 0xfff) |
+ (err_pos(bit3_root1_inv) == 0xfff) | (err_pos(bit3_root2_inv) == 0xfff)) {
+ return -EINVAL;
+ } else {
+ err_info[0] = 0x3;
+ err_info[1] = (0x55e - err_pos(bit3_root0_inv));
+ err_info[2] = (0x55e - err_pos(bit3_root1_inv));
+ err_info[3] = (0x55e - err_pos(bit3_root2_inv));
+ err_info[5] = err_pats[0];
+ err_info[6] = err_pats[1];
+ err_info[7] = err_pats[2];
+ return 0;
+ }
+ } else
+ return -EINVAL;
+ }
+}
+static int chk_4_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
+{
+ unsigned short coefs[4];
+ unsigned short err_pats[4];
+ int found_num_root = 0;
+ unsigned short bit4_root0, bit4_root1, bit4_root2, bit4_root3;
+ unsigned short bit4_root0_inv, bit4_root1_inv, bit4_root2_inv, bit4_root3_inv;
+ unsigned short err_loc_eqn, test_root;
+
+ find_4bit_err_coefs(chk_syndrome_list[0],
+ chk_syndrome_list[1],
+ chk_syndrome_list[2],
+ chk_syndrome_list[3],
+ chk_syndrome_list[4],
+ chk_syndrome_list[5], chk_syndrome_list[6], chk_syndrome_list[7], coefs);
+
+ for (test_root = 0x1; test_root < 0xfff; test_root++) {
+ err_loc_eqn =
+ gf4096_mul(coefs[3],
+ gf4096_mul(gf4096_mul
+ (gf4096_mul(test_root, test_root),
+ test_root),
+ test_root)) ^ gf4096_mul(coefs[2],
+ gf4096_mul
+ (gf4096_mul(test_root, test_root), test_root))
+ ^ gf4096_mul(coefs[1], gf4096_mul(test_root, test_root)) ^ gf4096_mul(coefs[0], test_root)
+ ^ 0x1;
+ if (err_loc_eqn == 0x0) {
+ if (found_num_root == 0) {
+ bit4_root0 = test_root;
+ found_num_root = 1;
+ } else if (found_num_root == 1) {
+ bit4_root1 = test_root;
+ found_num_root = 2;
+ } else if (found_num_root == 2) {
+ bit4_root2 = test_root;
+ found_num_root = 3;
+ } else {
+ found_num_root = 4;
+ bit4_root3 = test_root;
+ break;
+ }
+ }
+ }
+ if (found_num_root != 4) {
+ return -EINVAL;
+ } else {
+ bit4_root0_inv = gf4096_inv(bit4_root0);
+ bit4_root1_inv = gf4096_inv(bit4_root1);
+ bit4_root2_inv = gf4096_inv(bit4_root2);
+ bit4_root3_inv = gf4096_inv(bit4_root3);
+ find_4bit_err_pats(chk_syndrome_list[0],
+ chk_syndrome_list[1],
+ chk_syndrome_list[2],
+ chk_syndrome_list[3],
+ bit4_root0_inv, bit4_root1_inv, bit4_root2_inv, bit4_root3_inv, err_pats);
+ err_info[0] = 0x4;
+ err_info[1] = (0x55e - err_pos(bit4_root0_inv));
+ err_info[2] = (0x55e - err_pos(bit4_root1_inv));
+ err_info[3] = (0x55e - err_pos(bit4_root2_inv));
+ err_info[4] = (0x55e - err_pos(bit4_root3_inv));
+ err_info[5] = err_pats[0];
+ err_info[6] = err_pats[1];
+ err_info[7] = err_pats[2];
+ err_info[8] = err_pats[3];
+ return 0;
+ }
+}
+
+void correct_12bit_symbol(unsigned char *buf, unsigned short sym,
+ unsigned short val)
+{
+ if (unlikely(sym > 1366)) {
+ printk(KERN_ERR "Error: symbol %d out of range; cannot correct\n", sym);
+ } else if (sym == 0) {
+ buf[0] ^= val;
+ } else if (sym & 1) {
+ buf[1+(3*(sym-1))/2] ^= (val >> 4);
+ buf[2+(3*(sym-1))/2] ^= ((val & 0xf) << 4);
+ } else {
+ buf[2+(3*(sym-2))/2] ^= (val >> 8);
+ buf[3+(3*(sym-2))/2] ^= (val & 0xff);
+ }
+}
+
+static int debugecc = 0;
+module_param(debugecc, int, 0644);
+
+int cafe_correct_ecc(unsigned char *buf,
+ unsigned short *chk_syndrome_list)
+{
+ unsigned short err_info[9];
+ int i;
+
+ if (debugecc) {
+ printk(KERN_WARNING "cafe_correct_ecc invoked. Syndromes %x %x %x %x %x %x %x %x\n",
+ chk_syndrome_list[0], chk_syndrome_list[1],
+ chk_syndrome_list[2], chk_syndrome_list[3],
+ chk_syndrome_list[4], chk_syndrome_list[5],
+ chk_syndrome_list[6], chk_syndrome_list[7]);
+ for (i=0; i < 2048; i+=16) {
+ printk(KERN_WARNING "D %04x: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ i,
+ buf[i], buf[i+1], buf[i+2], buf[i+3],
+ buf[i+4], buf[i+5], buf[i+6], buf[i+7],
+ buf[i+8], buf[i+9], buf[i+10], buf[i+11],
+ buf[i+12], buf[i+13], buf[i+14], buf[i+15]);
+ }
+ for ( ; i < 2112; i+=16) {
+ printk(KERN_WARNING "O %02x: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ i - 2048,
+ buf[i], buf[i+1], buf[i+2], buf[i+3],
+ buf[i+4], buf[i+5], buf[i+6], buf[i+7],
+ buf[i+8], buf[i+9], buf[i+10], buf[i+11],
+ buf[i+12], buf[i+13], buf[i+14], buf[i+15]);
+ }
+ }
+
+
+
+ if (chk_no_err_only(chk_syndrome_list, err_info) &&
+ chk_1_err_only(chk_syndrome_list, err_info) &&
+ chk_2_err_only(chk_syndrome_list, err_info) &&
+ chk_3_err_only(chk_syndrome_list, err_info) &&
+ chk_4_err_only(chk_syndrome_list, err_info)) {
+ return -EIO;
+ }
+
+ for (i=0; i < err_info[0]; i++) {
+ if (debugecc)
+ printk(KERN_WARNING "Correct symbol %d with 0x%03x\n",
+ err_info[1+i], err_info[5+i]);
+
+ correct_12bit_symbol(buf, err_info[1+i], err_info[5+i]);
+ }
+
+ return err_info[0];
+}
+
* published by the Free Software Foundation.
*
* Overview:
- * This is a device driver for the NAND flash controller found on
+ * This is a device driver for the NAND flash controller found on
* the AMD CS5535/CS5536 companion chipsets for the Geode processor.
*
*/
err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
}
- /* Register all devices together here. This means we can easily hack it to
+ /* Register all devices together here. This means we can easily hack it to
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
len = sizeof(struct mtd_info) +
sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
- mtd = kmalloc(len, GFP_KERNEL);
+ mtd = kzalloc(len, GFP_KERNEL);
if (!mtd) {
printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
ret = -ENOMEM;
goto fail;
}
- memset(mtd, 0, len);
nand = (struct nand_chip *) (mtd + 1);
doc = (struct doc_priv *) (nand + 1);
* access
*/
ofs += mtd->oobsize;
- chip->ops.len = 2;
+ chip->ops.len = chip->ops.ooblen = 2;
chip->ops.datbuf = NULL;
chip->ops.oobbuf = buf;
chip->ops.ooboffs = chip->badblockpos & ~0x01;
}
/**
- * nand_read_page_swecc - {REPLACABLE] software ecc based page read function
+ * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
}
/**
- * nand_read_page_hwecc - {REPLACABLE] hardware ecc based page read function
+ * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
}
/**
- * nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
* @chip: nand chip structure
* @oob: oob destination address
* @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
- struct mtd_oob_ops *ops)
+ struct mtd_oob_ops *ops, size_t len)
{
- size_t len = ops->ooblen;
-
switch(ops->mode) {
case MTD_OOB_PLACE:
int sndcmd = 1;
int ret = 0;
uint32_t readlen = ops->len;
+ uint32_t oobreadlen = ops->ooblen;
uint8_t *bufpoi, *oob, *buf;
stats = mtd->ecc_stats;
page = realpage & chip->pagemask;
col = (int)(from & (mtd->writesize - 1));
- chip->oob_poi = chip->buffers->oobrbuf;
buf = ops->datbuf;
oob = ops->oobbuf;
if (unlikely(oob)) {
/* Raw mode does data:oob:data:oob */
- if (ops->mode != MTD_OOB_RAW)
- oob = nand_transfer_oob(chip, oob, ops);
- else
- buf = nand_transfer_oob(chip, buf, ops);
+ if (ops->mode != MTD_OOB_RAW) {
+ int toread = min(oobreadlen,
+ chip->ecc.layout->oobavail);
+ if (toread) {
+ oob = nand_transfer_oob(chip,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
+ } else
+ buf = nand_transfer_oob(chip,
+ buf, ops, mtd->oobsize);
}
if (!(chip->options & NAND_NO_READRDY)) {
}
ops->retlen = ops->len - (size_t) readlen;
+ if (oob)
+ ops->oobretlen = ops->ooblen - oobreadlen;
if (ret)
return ret;
int page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
- int readlen = ops->len;
+ int readlen = ops->ooblen;
+ int len;
uint8_t *buf = ops->oobbuf;
DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
(unsigned long long)from, readlen);
+ if (ops->mode == MTD_OOB_RAW)
+ len = mtd->oobsize;
+ else
+ len = chip->ecc.layout->oobavail;
+
chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
realpage = (int)(from >> chip->page_shift);
page = realpage & chip->pagemask;
- chip->oob_poi = chip->buffers->oobrbuf;
-
while(1) {
sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
- buf = nand_transfer_oob(chip, buf, ops);
+
+ len = min(len, readlen);
+ buf = nand_transfer_oob(chip, buf, ops, len);
if (!(chip->options & NAND_NO_READRDY)) {
/*
nand_wait_ready(mtd);
}
- readlen -= ops->ooblen;
+ readlen -= len;
if (!readlen)
break;
sndcmd = 1;
}
- ops->retlen = ops->len;
+ ops->oobretlen = ops->ooblen;
return 0;
}
ops->retlen = 0;
/* Do not allow reads past end of device */
- if ((from + ops->len) > mtd->size) {
+ if (ops->datbuf && (from + ops->len) > mtd->size) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
"Attempt read beyond end of device\n");
return -EINVAL;
}
/**
- * nand_write_page_swecc - {REPLACABLE] software ecc based page write function
+ * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
}
/**
- * nand_write_page_hwecc - {REPLACABLE] hardware ecc based page write function
+ * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
}
/**
- * nand_write_page_syndrome - {REPLACABLE] hardware ecc syndrom based page write
+ * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
return NULL;
}
-#define NOTALIGNED(x) (x & (mtd->writesize-1)) != 0
+#define NOTALIGNED(x) (x & (chip->subpagesize - 1)) != 0
/**
* nand_do_write_ops - [Internal] NAND write with ECC
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- int chipnr, realpage, page, blockmask;
+ int chipnr, realpage, page, blockmask, column;
struct nand_chip *chip = mtd->priv;
uint32_t writelen = ops->len;
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
- int bytes = mtd->writesize;
- int ret;
+ int ret, subpage;
ops->retlen = 0;
+ if (!writelen)
+ return 0;
/* reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
return -EINVAL;
}
- if (!writelen)
- return 0;
+ column = to & (mtd->writesize - 1);
+ subpage = column || (writelen & (mtd->writesize - 1));
+
+ if (subpage && oob)
+ return -EINVAL;
chipnr = (int)(to >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- chip->oob_poi = chip->buffers->oobwbuf;
+ /* If we're not given explicit OOB data, let it be 0xFF */
+ if (likely(!oob))
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
while(1) {
+ int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
+ uint8_t *wbuf = buf;
+
+ /* Partial page write ? */
+ if (unlikely(column || writelen < (mtd->writesize - 1))) {
+ cached = 0;
+ bytes = min_t(int, bytes - column, (int) writelen);
+ chip->pagebuf = -1;
+ memset(chip->buffers->databuf, 0xff, mtd->writesize);
+ memcpy(&chip->buffers->databuf[column], buf, bytes);
+ wbuf = chip->buffers->databuf;
+ }
if (unlikely(oob))
oob = nand_fill_oob(chip, oob, ops);
- ret = chip->write_page(mtd, chip, buf, page, cached,
+ ret = chip->write_page(mtd, chip, wbuf, page, cached,
(ops->mode == MTD_OOB_RAW));
if (ret)
break;
if (!writelen)
break;
+ column = 0;
buf += bytes;
realpage++;
}
}
- if (unlikely(oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
ops->retlen = ops->len - writelen;
+ if (unlikely(oob))
+ ops->oobretlen = ops->ooblen;
return ret;
}
struct nand_chip *chip = mtd->priv;
DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
- (unsigned int)to, (int)ops->len);
+ (unsigned int)to, (int)ops->ooblen);
/* Do not allow write past end of page */
- if ((ops->ooboffs + ops->len) > mtd->oobsize) {
+ if ((ops->ooboffs + ops->ooblen) > mtd->oobsize) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
"Attempt to write past end of page\n");
return -EINVAL;
if (page == chip->pagebuf)
chip->pagebuf = -1;
- chip->oob_poi = chip->buffers->oobwbuf;
memset(chip->oob_poi, 0xff, mtd->oobsize);
nand_fill_oob(chip, ops->oobbuf, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
- ops->retlen = ops->len;
+ ops->oobretlen = ops->ooblen;
return 0;
}
ops->retlen = 0;
/* Do not allow writes past end of device */
- if ((to + ops->len) > mtd->size) {
+ if (ops->datbuf && (to + ops->len) > mtd->size) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
"Attempt read beyond end of device\n");
return -EINVAL;
/* Newer devices have all the information in additional id bytes */
if (!type->pagesize) {
int extid;
- /* The 3rd id byte contains non relevant data ATM */
- extid = chip->read_byte(mtd);
+ /* The 3rd id byte holds MLC / multichip data */
+ chip->cellinfo = chip->read_byte(mtd);
/* The 4th id byte is the important one */
extid = chip->read_byte(mtd);
/* Calc pagesize */
if (!chip->buffers)
return -ENOMEM;
- /* Preset the internal oob write buffer */
- memset(chip->buffers->oobwbuf, 0xff, mtd->oobsize);
+ /* Set the internal oob buffer location, just after the page data */
+ chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
* If no default placement scheme is given, select an appropriate one
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+ /*
+ * Allow subpage writes up to ecc.steps. Not possible for MLC
+ * FLASH.
+ */
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+ !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+ switch(chip->ecc.steps) {
+ case 2:
+ mtd->subpage_sft = 1;
+ break;
+ case 4:
+ case 8:
+ mtd->subpage_sft = 2;
+ break;
+ }
+ }
+ chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
/* Initialize state */
chip->state = FL_READY;
struct mtd_oob_ops ops;
int j, ret;
- ops.len = mtd->oobsize;
ops.ooblen = mtd->oobsize;
ops.oobbuf = buf;
ops.ooboffs = 0;
"bad block table\n");
}
/* Read oob data */
- ops.len = (len >> this->page_shift) * mtd->oobsize;
+ ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
ops.oobbuf = &buf[len];
res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
- if (res < 0 || ops.retlen != ops.len)
+ if (res < 0 || ops.oobretlen != ops.ooblen)
goto outerr;
/* Calc the byte offset in the buffer */
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) */
- this->bbt = kmalloc(len, GFP_KERNEL);
+ /* Allocate memory (2bit per block) and clear the memory bad block table */
+ this->bbt = kzalloc(len, GFP_KERNEL);
if (!this->bbt) {
printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
return -ENOMEM;
}
- /* Clear the memory bad block table */
- memset(this->bbt, 0x00, len);
/* If no primary table decriptor is given, scan the device
* to build a memory based bad block table
tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
/* Calculate final ECC code */
-#ifdef CONFIG_NAND_ECC_SMC
+#ifdef CONFIG_MTD_NAND_ECC_SMC
ecc_code[0] = ~tmp2;
ecc_code[1] = ~tmp1;
#else
{
uint8_t s0, s1, s2;
-#ifdef CONFIG_NAND_ECC_SMC
+#ifdef CONFIG_MTD_NAND_ECC_SMC
s0 = calc_ecc[0] ^ read_ecc[0];
s1 = calc_ecc[1] ^ read_ecc[1];
s2 = calc_ecc[2] ^ read_ecc[2];
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
-#ifdef CONFIG_NS_ABS_POS
-#include <asm/io.h>
-#endif
-
/* Default simulator parameters values */
#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
/* After a command is input, the simulator goes to one of the following states */
#define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */
#define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */
-#define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
+#define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
#define STATE_CMD_PAGEPROG 0x00000004 /* start page programm */
#define STATE_CMD_READOOB 0x00000005 /* read OOB area */
#define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */
*/
#define NS_MAX_PREVSTATES 1
+/*
+ * A union to represent flash memory contents and flash buffer.
+ */
+union ns_mem {
+ u_char *byte; /* for byte access */
+ uint16_t *word; /* for 16-bit word access */
+};
+
/*
* The structure which describes all the internal simulator data.
*/
uint16_t npstates; /* number of previous states saved */
uint16_t stateidx; /* current state index */
- /* The simulated NAND flash image */
- union flash_media {
- u_char *byte;
- uint16_t *word;
- } mem;
+ /* The simulated NAND flash pages array */
+ union ns_mem *pages;
/* Internal buffer of page + OOB size bytes */
- union internal_buffer {
- u_char *byte; /* for byte access */
- uint16_t *word; /* for 16-bit word access */
- } buf;
+ union ns_mem buf;
/* NAND flash "geometry" */
struct nandsin_geometry {
static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE];
+/*
+ * Allocate array of page pointers and initialize the array to NULL
+ * pointers.
+ *
+ * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
+ */
+static int alloc_device(struct nandsim *ns)
+{
+ int i;
+
+ ns->pages = vmalloc(ns->geom.pgnum * sizeof(union ns_mem));
+ if (!ns->pages) {
+ NS_ERR("alloc_map: unable to allocate page array\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < ns->geom.pgnum; i++) {
+ ns->pages[i].byte = NULL;
+ }
+
+ return 0;
+}
+
+/*
+ * Free any allocated pages, and free the array of page pointers.
+ */
+static void free_device(struct nandsim *ns)
+{
+ int i;
+
+ if (ns->pages) {
+ for (i = 0; i < ns->geom.pgnum; i++) {
+ if (ns->pages[i].byte)
+ kfree(ns->pages[i].byte);
+ }
+ vfree(ns->pages);
+ }
+}
+
/*
* Initialize the nandsim structure.
*
* RETURNS: 0 if success, -ERRNO if failure.
*/
-static int
-init_nandsim(struct mtd_info *mtd)
+static int init_nandsim(struct mtd_info *mtd)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
struct nandsim *ns = (struct nandsim *)(chip->priv);
}
} else {
if (ns->geom.totsz <= (128 << 20)) {
- ns->geom.pgaddrbytes = 5;
+ ns->geom.pgaddrbytes = 4;
ns->geom.secaddrbytes = 2;
} else {
ns->geom.pgaddrbytes = 5;
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
printk("options: %#x\n", ns->options);
- /* Map / allocate and initialize the flash image */
-#ifdef CONFIG_NS_ABS_POS
- ns->mem.byte = ioremap(CONFIG_NS_ABS_POS, ns->geom.totszoob);
- if (!ns->mem.byte) {
- NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n",
- (void *)CONFIG_NS_ABS_POS);
- return -ENOMEM;
- }
-#else
- ns->mem.byte = vmalloc(ns->geom.totszoob);
- if (!ns->mem.byte) {
- NS_ERR("init_nandsim: unable to allocate %u bytes for flash image\n",
- ns->geom.totszoob);
- return -ENOMEM;
- }
- memset(ns->mem.byte, 0xFF, ns->geom.totszoob);
-#endif
+ if (alloc_device(ns) != 0)
+ goto error;
/* Allocate / initialize the internal buffer */
ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
return 0;
error:
-#ifdef CONFIG_NS_ABS_POS
- iounmap(ns->mem.byte);
-#else
- vfree(ns->mem.byte);
-#endif
+ free_device(ns);
return -ENOMEM;
}
/*
* Free the nandsim structure.
*/
-static void
-free_nandsim(struct nandsim *ns)
+static void free_nandsim(struct nandsim *ns)
{
kfree(ns->buf.byte);
-
-#ifdef CONFIG_NS_ABS_POS
- iounmap(ns->mem.byte);
-#else
- vfree(ns->mem.byte);
-#endif
+ free_device(ns);
return;
}
/*
* Returns the string representation of 'state' state.
*/
-static char *
-get_state_name(uint32_t state)
+static char *get_state_name(uint32_t state)
{
switch (NS_STATE(state)) {
case STATE_CMD_READ0:
*
* RETURNS: 1 if wrong command, 0 if right.
*/
-static int
-check_command(int cmd)
+static int check_command(int cmd)
{
switch (cmd) {
/*
* Returns state after command is accepted by command number.
*/
-static uint32_t
-get_state_by_command(unsigned command)
+static uint32_t get_state_by_command(unsigned command)
{
switch (command) {
case NAND_CMD_READ0:
/*
* Move an address byte to the correspondent internal register.
*/
-static inline void
-accept_addr_byte(struct nandsim *ns, u_char bt)
+static inline void accept_addr_byte(struct nandsim *ns, u_char bt)
{
uint byte = (uint)bt;
/*
* Switch to STATE_READY state.
*/
-static inline void
-switch_to_ready_state(struct nandsim *ns, u_char status)
+static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
{
NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
* -1 - several matches.
* 0 - operation is found.
*/
-static int
-find_operation(struct nandsim *ns, uint32_t flag)
+static int find_operation(struct nandsim *ns, uint32_t flag)
{
int opsfound = 0;
int i, j, idx = 0;
return -1;
}
+/*
+ * Returns a pointer to the current page.
+ */
+static inline union ns_mem *NS_GET_PAGE(struct nandsim *ns)
+{
+ return &(ns->pages[ns->regs.row]);
+}
+
+/*
+ * Retuns a pointer to the current byte, within the current page.
+ */
+static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
+{
+ return NS_GET_PAGE(ns)->byte + ns->regs.column + ns->regs.off;
+}
+
+/*
+ * Fill the NAND buffer with data read from the specified page.
+ */
+static void read_page(struct nandsim *ns, int num)
+{
+ union ns_mem *mypage;
+
+ mypage = NS_GET_PAGE(ns);
+ if (mypage->byte == NULL) {
+ NS_DBG("read_page: page %d not allocated\n", ns->regs.row);
+ memset(ns->buf.byte, 0xFF, num);
+ } else {
+ NS_DBG("read_page: page %d allocated, reading from %d\n",
+ ns->regs.row, ns->regs.column + ns->regs.off);
+ memcpy(ns->buf.byte, NS_PAGE_BYTE_OFF(ns), num);
+ }
+}
+
+/*
+ * Erase all pages in the specified sector.
+ */
+static void erase_sector(struct nandsim *ns)
+{
+ union ns_mem *mypage;
+ int i;
+
+ mypage = NS_GET_PAGE(ns);
+ for (i = 0; i < ns->geom.pgsec; i++) {
+ if (mypage->byte != NULL) {
+ NS_DBG("erase_sector: freeing page %d\n", ns->regs.row+i);
+ kfree(mypage->byte);
+ mypage->byte = NULL;
+ }
+ mypage++;
+ }
+}
+
+/*
+ * Program the specified page with the contents from the NAND buffer.
+ */
+static int prog_page(struct nandsim *ns, int num)
+{
+ int i;
+ union ns_mem *mypage;
+ u_char *pg_off;
+
+ mypage = NS_GET_PAGE(ns);
+ if (mypage->byte == NULL) {
+ NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
+ mypage->byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+ if (mypage->byte == NULL) {
+ NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
+ return -1;
+ }
+ memset(mypage->byte, 0xFF, ns->geom.pgszoob);
+ }
+
+ pg_off = NS_PAGE_BYTE_OFF(ns);
+ for (i = 0; i < num; i++)
+ pg_off[i] &= ns->buf.byte[i];
+
+ return 0;
+}
+
/*
* If state has any action bit, perform this action.
*
* RETURNS: 0 if success, -1 if error.
*/
-static int
-do_state_action(struct nandsim *ns, uint32_t action)
+static int do_state_action(struct nandsim *ns, uint32_t action)
{
- int i, num;
+ int num;
int busdiv = ns->busw == 8 ? 1 : 2;
action &= ACTION_MASK;
break;
}
num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
- memcpy(ns->buf.byte, ns->mem.byte + NS_RAW_OFFSET(ns) + ns->regs.off, num);
+ read_page(ns, num);
NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
num, NS_RAW_OFFSET(ns) + ns->regs.off);
ns->regs.row, NS_RAW_OFFSET(ns));
NS_LOG("erase sector %d\n", ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift));
- memset(ns->mem.byte + NS_RAW_OFFSET(ns), 0xFF, ns->geom.secszoob);
+ erase_sector(ns);
NS_MDELAY(erase_delay);
return -1;
}
- for (i = 0; i < num; i++)
- ns->mem.byte[NS_RAW_OFFSET(ns) + ns->regs.off + i] &= ns->buf.byte[i];
+ if (prog_page(ns, num) == -1)
+ return -1;
NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
/*
* Switch simulator's state.
*/
-static void
-switch_state(struct nandsim *ns)
+static void switch_state(struct nandsim *ns)
{
if (ns->op) {
/*
}
}
-static u_char
-ns_nand_read_byte(struct mtd_info *mtd)
+static u_char ns_nand_read_byte(struct mtd_info *mtd)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
u_char outb = 0x00;
return outb;
}
-static void
-ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
+static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
ns_nand_write_byte(mtd, cmd);
}
-static int
-ns_device_ready(struct mtd_info *mtd)
+static int ns_device_ready(struct mtd_info *mtd)
{
NS_DBG("device_ready\n");
return 1;
}
-static uint16_t
-ns_nand_read_word(struct mtd_info *mtd)
+static uint16_t ns_nand_read_word(struct mtd_info *mtd)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
}
-static void
-ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
}
}
-static void
-ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
return;
}
-static int
-ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static int ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len);
}
/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
- nsmtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+ nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+ sizeof(struct nandsim), GFP_KERNEL);
if (!nsmtd) {
NS_ERR("unable to allocate core structures.\n");
return -ENOMEM;
}
- memset(nsmtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip) +
- sizeof(struct nandsim));
chip = (struct nand_chip *)(nsmtd + 1);
nsmtd->priv = (void *)chip;
nand = (struct nandsim *)(chip + 1);
ccr |= NDFC_CCR_BS(chip + pchip->chip_offset);
} else
ccr |= NDFC_CCR_RESET_CE;
- writel(ccr, ndfc->ndfcbase + NDFC_CCR);
+ __raw_writel(ccr, ndfc->ndfcbase + NDFC_CCR);
}
static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/rslib.h>
+#include <linux/bitrev.h>
#include <linux/module.h>
#include <linux/mtd/compatmac.h>
#include <linux/mtd/mtd.h>
.oobfree = {{32, 32}}
};
-/* Aargh. I missed the reversed bit order, when I
- * was talking to Renesas about the FPGA.
- *
- * The table is used for bit reordering and inversion
- * of the ecc byte which we get from the FPGA
- */
-static uint8_t revbits[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
-};
-
#endif
/*
/* Read the syndrom pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
for (i = 0; i < 8; i++) {
- ecc[i] = revbits[(*rs_ecc) & 0xFF];
+ ecc[i] = bitrev8(*rs_ecc);
rs_ecc++;
}
rtn = nand_do_read(mtd, page, len, &retlen, buf);
/* if read failed or > 1-bit error corrected */
- if (rtn || (mtd->ecc_stats.corrected - corrected) > 1) {
+ if (rtn || (mtd->ecc_stats.corrected - corrected) > 1)
er_stat |= 1 << 1;
kfree(buf);
}
unsigned int ctrl)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-
+
if (cmd == NAND_CMD_NONE)
return;
DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
- nftl = kmalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
+ nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
if (!nftl) {
printk(KERN_WARNING "NFTL: out of memory for data structures\n");
return;
}
- memset(nftl, 0, sizeof(*nftl));
nftl->mbd.mtd = mtd;
nftl->mbd.devnum = -1;
- nftl->mbd.blksize = 512;
+
nftl->mbd.tr = tr;
if (NFTL_mount(nftl) < 0) {
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- ops.len = len;
res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
- *retlen = ops.retlen;
+ *retlen = ops.oobretlen;
return res;
}
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- ops.len = len;
res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
- *retlen = ops.retlen;
+ *retlen = ops.oobretlen;
return res;
}
.name = "nftl",
.major = NFTL_MAJOR,
.part_bits = NFTL_PARTN_BITS,
+ .blksize = 512,
.getgeo = nftl_getgeo,
.readsect = nftl_readblock,
#ifdef CONFIG_NFTL_RW
unsigned long size = res->end - res->start + 1;
int err;
- info = kmalloc(sizeof(struct onenand_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
- memset(info, 0, sizeof(struct onenand_info));
-
if (!request_mem_region(res->start, size, dev->driver->name)) {
err = -EBUSY;
goto out_free_info;
}
info->onenand.mmcontrol = pdata->mmcontrol;
+ info->onenand.irq = platform_get_irq(pdev, 0);
info->mtd.name = pdev->dev.bus_id;
info->mtd.priv = &info->onenand;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
struct onenand_chip *this = mtd->priv;
int value, readcmd = 0, block_cmd = 0;
int block, page;
- /* Now we use page size operation */
- int sectors = 4, count = 4;
/* Address translation */
switch (cmd) {
}
if (page != -1) {
+ /* Now we use page size operation */
+ int sectors = 4, count = 4;
int dataram;
switch (cmd) {
unsigned long timeout;
unsigned int flags = ONENAND_INT_MASTER;
unsigned int interrupt = 0;
- unsigned int ctrl, ecc;
+ unsigned int ctrl;
/* The 20 msec is enough */
timeout = jiffies + msecs_to_jiffies(20);
if (state != FL_READING)
cond_resched();
- touch_softlockup_watchdog();
}
/* To get correct interrupt status in timeout case */
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- /* It maybe occur at initial bad block */
DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
- /* Clear other interrupt bits for preventing ECC error */
- interrupt &= ONENAND_INT_MASTER;
- }
-
- if (ctrl & ONENAND_CTRL_LOCK) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error = 0x%04x\n", ctrl);
- return -EACCES;
+ if (ctrl & ONENAND_CTRL_LOCK)
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error.\n");
+ return ctrl;
}
if (interrupt & ONENAND_INT_READ) {
- ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
- if (ecc & ONENAND_ECC_2BIT_ALL) {
+ int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ if (ecc) {
DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
- return -EBADMSG;
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ mtd->ecc_stats.failed++;
+ return ecc;
+ } else if (ecc & ONENAND_ECC_1BIT_ALL)
+ mtd->ecc_stats.corrected++;
}
}
return 0;
}
+/*
+ * onenand_interrupt - [DEFAULT] onenand interrupt handler
+ * @param irq onenand interrupt number
+ * @param dev_id interrupt data
+ *
+ * complete the work
+ */
+static irqreturn_t onenand_interrupt(int irq, void *data)
+{
+ struct onenand_chip *this = (struct onenand_chip *) data;
+
+ /* To handle shared interrupt */
+ if (!this->complete.done)
+ complete(&this->complete);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * onenand_interrupt_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_interrupt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ wait_for_completion(&this->complete);
+
+ return onenand_wait(mtd, state);
+}
+
+/*
+ * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Try interrupt based wait (It is used one-time)
+ */
+static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned long remain, timeout;
+
+ /* We use interrupt wait first */
+ this->wait = onenand_interrupt_wait;
+
+ timeout = msecs_to_jiffies(100);
+ remain = wait_for_completion_timeout(&this->complete, timeout);
+ if (!remain) {
+ printk(KERN_INFO "OneNAND: There's no interrupt. "
+ "We use the normal wait\n");
+
+ /* Release the irq */
+ free_irq(this->irq, this);
+
+ this->wait = onenand_wait;
+ }
+
+ return onenand_wait(mtd, state);
+}
+
+/*
+ * onenand_setup_wait - [OneNAND Interface] setup onenand wait method
+ * @param mtd MTD device structure
+ *
+ * There's two method to wait onenand work
+ * 1. polling - read interrupt status register
+ * 2. interrupt - use the kernel interrupt method
+ */
+static void onenand_setup_wait(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int syscfg;
+
+ init_completion(&this->complete);
+
+ if (this->irq <= 0) {
+ this->wait = onenand_wait;
+ return;
+ }
+
+ if (request_irq(this->irq, &onenand_interrupt,
+ IRQF_SHARED, "onenand", this)) {
+ /* If we can't get irq, use the normal wait */
+ this->wait = onenand_wait;
+ return;
+ }
+
+ /* Enable interrupt */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ syscfg |= ONENAND_SYS_CFG1_IOBE;
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+
+ this->wait = onenand_try_interrupt_wait;
+}
+
/**
* onenand_bufferram_offset - [DEFAULT] BufferRAM offset
* @param mtd MTD data structure
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
+ struct mtd_ecc_stats stats;
int read = 0, column;
int thislen;
- int ret = 0;
+ int ret = 0, boundary = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
/* TODO handling oob */
- while (read < len) {
- thislen = min_t(int, mtd->writesize, len - read);
-
- column = from & (mtd->writesize - 1);
- if (column + thislen > mtd->writesize)
- thislen = mtd->writesize - column;
-
- if (!onenand_check_bufferram(mtd, from)) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
-
- ret = this->wait(mtd, FL_READING);
- /* First copy data and check return value for ECC handling */
- onenand_update_bufferram(mtd, from, 1);
- }
-
- this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
-
- read += thislen;
-
- if (read == len)
- break;
-
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: read failed = %d\n", ret);
- goto out;
- }
-
- from += thislen;
- buf += thislen;
- }
+ stats = mtd->ecc_stats;
+
+ /* Read-while-load method */
+
+ /* Do first load to bufferRAM */
+ if (read < len) {
+ if (!onenand_check_bufferram(mtd, from)) {
+ this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ }
+ }
+
+ thislen = min_t(int, mtd->writesize, len - read);
+ column = from & (mtd->writesize - 1);
+ if (column + thislen > mtd->writesize)
+ thislen = mtd->writesize - column;
+
+ while (!ret) {
+ /* If there is more to load then start next load */
+ from += thislen;
+ if (read + thislen < len) {
+ this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ /*
+ * Chip boundary handling in DDP
+ * Now we issued chip 1 read and pointed chip 1
+ * bufferam so we have to point chip 0 bufferam.
+ */
+ if (this->device_id & ONENAND_DEVICE_IS_DDP &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(0, this->base + ONENAND_REG_START_ADDRESS2);
+ boundary = 1;
+ } else
+ boundary = 0;
+ ONENAND_SET_PREV_BUFFERRAM(this);
+ }
+ /* While load is going, read from last bufferRAM */
+ this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+ /* See if we are done */
+ read += thislen;
+ if (read == len)
+ break;
+ /* Set up for next read from bufferRAM */
+ if (unlikely(boundary))
+ this->write_word(0x8000, this->base + ONENAND_REG_START_ADDRESS2);
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ buf += thislen;
+ thislen = min_t(int, mtd->writesize, len - read);
+ column = 0;
+ cond_resched();
+ /* Now wait for load */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ }
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
* retlen == desired len and result == -EBADMSG
*/
*retlen = read;
- return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ if (ret)
+ return ret;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
column = from & (mtd->oobsize - 1);
while (read < len) {
+ cond_resched();
+
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
+ goto out;
+ }
+
read += thislen;
if (read == len)
break;
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = %d\n", ret);
- goto out;
- }
-
buf += thislen;
/* Read more? */
{
BUG_ON(ops->mode != MTD_OOB_PLACE);
- return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->len,
- &ops->retlen, ops->oobbuf);
+ return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
+ &ops->oobretlen, ops->oobbuf);
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
void __iomem *dataram0, *dataram1;
int ret = 0;
+ /* In partial page write, just skip it */
+ if ((addr & (mtd->writesize - 1)) != 0)
+ return 0;
+
this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
ret = this->wait(mtd, FL_READING);
#define onenand_verify_oob(...) (0)
#endif
-#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0)
+#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
/**
* onenand_write - [MTD Interface] write buffer to FLASH
struct onenand_chip *this = mtd->priv;
int written = 0;
int ret = 0;
+ int column, subpage;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
return -EINVAL;
}
+ column = to & (mtd->writesize - 1);
+ subpage = column || (len & (mtd->writesize - 1));
+
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->writesize, len - written);
-
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize);
+ int bytes = mtd->writesize;
+ int thislen = min_t(int, bytes, len - written);
+ u_char *wbuf = (u_char *) buf;
+
+ cond_resched();
+
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes);
+
+ /* Partial page write */
+ if (subpage) {
+ bytes = min_t(int, bytes - column, (int) len);
+ memset(this->page_buf, 0xff, mtd->writesize);
+ memcpy(this->page_buf + column, buf, bytes);
+ wbuf = this->page_buf;
+ /* Even though partial write, we need page size */
+ thislen = mtd->writesize;
+ }
- this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
+ this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
- onenand_update_bufferram(mtd, to, 1);
+ /* In partial page write we don't update bufferram */
+ onenand_update_bufferram(mtd, to, !subpage);
ret = this->wait(mtd, FL_WRITING);
if (ret) {
DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
- goto out;
+ break;
}
- written += thislen;
-
/* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) buf, to);
+ ret = onenand_verify_page(mtd, (u_char *) wbuf, to);
if (ret) {
DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
- goto out;
+ break;
}
+ written += thislen;
+
if (written == len)
break;
+ column = 0;
to += thislen;
buf += thislen;
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
while (written < len) {
int thislen = min_t(int, mtd->oobsize, len - written);
+ cond_resched();
+
column = to & (mtd->oobsize - 1);
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
{
BUG_ON(ops->mode != MTD_OOB_PLACE);
- return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->len,
- &ops->retlen, ops->oobbuf);
+ return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
+ &ops->oobretlen, ops->oobbuf);
}
/**
instr->state = MTD_ERASING;
while (len) {
+ cond_resched();
/* Check if we have a bad block, we do not erase bad blocks */
if (onenand_block_checkbad(mtd, addr, 0, 0)) {
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
- if (ret == -EPERM)
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Device is write protected!!!\n");
- else
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
onenand_release_device(mtd);
}
-
/**
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
* @param mtd MTD device structure
}
/**
- * onenand_unlock - [MTD Interface] Unlock block(s)
+ * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
- * @param len number of bytes to unlock
+ * @param len number of bytes to lock or unlock
*
- * Unlock one or more blocks
+ * Lock or unlock one or more blocks
*/
-static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
{
struct onenand_chip *this = mtd->priv;
int start, end, block, value, status;
+ int wp_status_mask;
start = ofs >> this->erase_shift;
end = len >> this->erase_shift;
+ if (cmd == ONENAND_CMD_LOCK)
+ wp_status_mask = ONENAND_WP_LS;
+ else
+ wp_status_mask = ONENAND_WP_US;
+
/* Continuous lock scheme */
if (this->options & ONENAND_HAS_CONT_LOCK) {
/* Set start block address */
this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Set end block address */
this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
- /* Write unlock command */
- this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+ /* Write lock command */
+ this->command(mtd, cmd, 0, 0);
/* There's no return value */
- this->wait(mtd, FL_UNLOCKING);
+ this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
- if (!(status & ONENAND_WP_US))
+ if (!(status & wp_status_mask))
printk(KERN_ERR "wp status = 0x%x\n", status);
return 0;
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
/* Set start block address */
this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
- /* Write unlock command */
- this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+ /* Write lock command */
+ this->command(mtd, cmd, 0, 0);
/* There's no return value */
- this->wait(mtd, FL_UNLOCKING);
+ this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
- if (!(status & ONENAND_WP_US))
+ if (!(status & wp_status_mask))
printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
}
return 0;
}
+/**
+ * onenand_lock - [MTD Interface] Lock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Lock one or more blocks
+ */
+static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ return onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
+}
+
+/**
+ * onenand_unlock - [MTD Interface] Unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Unlock one or more blocks
+ */
+static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ return onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+}
+
/**
* onenand_check_lock_status - [OneNAND Interface] Check lock status
* @param this onenand chip data structure
this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
/* There's no return value */
- this->wait(mtd, FL_UNLOCKING);
+ this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
return 0;
}
- mtd->unlock(mtd, 0x0, this->chipsize);
+ onenand_unlock(mtd, 0x0, this->chipsize);
return 0;
}
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
- ver_id= this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
if (!this->command)
this->command = onenand_command;
if (!this->wait)
- this->wait = onenand_wait;
+ onenand_setup_wait(mtd);
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
init_waitqueue_head(&this->wq);
spin_lock_init(&this->chip_lock);
+ /*
+ * Allow subpage writes up to oobsize.
+ */
switch (mtd->oobsize) {
case 64:
this->ecclayout = &onenand_oob_64;
+ mtd->subpage_sft = 2;
break;
case 32:
this->ecclayout = &onenand_oob_32;
+ mtd->subpage_sft = 1;
break;
default:
printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
mtd->oobsize);
+ mtd->subpage_sft = 0;
/* To prevent kernel oops */
this->ecclayout = &onenand_oob_32;
break;
}
+ this->subpagesize = mtd->writesize >> mtd->subpage_sft;
mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
#endif
mtd->sync = onenand_sync;
- mtd->lock = NULL;
+ mtd->lock = onenand_lock;
mtd->unlock = onenand_unlock;
mtd->suspend = onenand_suspend;
mtd->resume = onenand_resume;
ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
readlen, &retlen, &buf[0]);
- if (ret)
+ /* If it is a initial bad block, just ignore it */
+ if (ret && !(ret & ONENAND_CTRL_LOAD))
return ret;
if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int) from);
+ mtd->ecc_stats.badblocks++;
break;
}
}
int len, ret = 0;
len = mtd->size >> (this->erase_shift + 2);
- /* Allocate memory (2bit per block) */
- bbm->bbt = kmalloc(len, GFP_KERNEL);
+ /* Allocate memory (2bit per block) and clear the memory bad block table */
+ bbm->bbt = kzalloc(len, GFP_KERNEL);
if (!bbm->bbt) {
printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
return -ENOMEM;
}
- /* Clear the memory bad block table */
- memset(bbm->bbt, 0x00, len);
/* Set the bad block position */
bbm->badblockpos = ONENAND_BADBLOCK_POS;
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm;
- this->bbm = kmalloc(sizeof(struct bbm_info), GFP_KERNEL);
+ this->bbm = kzalloc(sizeof(struct bbm_info), GFP_KERNEL);
if (!this->bbm)
return -ENOMEM;
bbm = this->bbm;
- memset(bbm, 0, sizeof(struct bbm_info));
-
/* 1KB page has same configuration as 2KB page */
if (!bbm->badblock_pattern)
bbm->badblock_pattern = &largepage_memorybased;
*/
if (swab32(buf[i].size) == master->erasesize) {
int j;
- for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+ for (j = 0; j < numslots; ++j) {
+
+ /* A single 0xff denotes a deleted entry.
+ * Two of them in a row is the end of the table.
+ */
+ if (buf[j].name[0] == 0xff) {
+ if (buf[j].name[1] == 0xff) {
+ break;
+ } else {
+ continue;
+ }
+ }
+
/* The unsigned long fields were written with the
* wrong byte sex, name and pad have no byte sex.
*/
}
}
break;
+ } else {
+ /* re-calculate of real numslots */
+ numslots = buf[i].size / sizeof(struct fis_image_desc);
}
}
if (i == numslots) {
for (i = 0; i < numslots; i++) {
struct fis_list *new_fl, **prev;
- if (buf[i].name[0] == 0xff)
- continue;
+ if (buf[i].name[0] == 0xff) {
+ if (buf[i].name[1] == 0xff) {
+ break;
+ } else {
+ continue;
+ }
+ }
if (!redboot_checksum(&buf[i]))
break;
}
}
#endif
- parts = kmalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
+ parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
if (!parts) {
ret = -ENOMEM;
goto out;
}
- memset(parts, 0, sizeof(*parts)*nrparts + nulllen + namelen);
-
nullname = (char *)&parts[nrparts];
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if (nulllen > 0) {
if (scan_header(part) == 0) {
part->mbd.size = part->sector_count;
- part->mbd.blksize = SECTOR_SIZE;
part->mbd.tr = tr;
part->mbd.devnum = -1;
if (!(mtd->flags & MTD_WRITEABLE))
.name = "rfd",
.major = RFD_FTL_MAJOR,
.part_bits = PART_BITS,
+ .blksize = SECTOR_SIZE,
+
.readsect = rfd_ftl_readsect,
.writesect = rfd_ftl_writesect,
.getgeo = rfd_ftl_getgeo,
ops.mode = MTD_OOB_RAW;
ops.ooboffs = 0;
- ops.ooblen = mtd->oobsize;
- ops.len = OOB_SIZE;
+ ops.ooblen = OOB_SIZE;
ops.oobbuf = buf;
ops.datbuf = NULL;
ret = mtd->read_oob(mtd, offs, &ops);
- if (ret < 0 || ops.retlen != OOB_SIZE)
+ if (ret < 0 || ops.oobretlen != OOB_SIZE)
return -1;
return 0;
ssfdc->mbd.mtd = mtd;
ssfdc->mbd.devnum = -1;
- ssfdc->mbd.blksize = SECTOR_SIZE;
ssfdc->mbd.tr = tr;
ssfdc->mbd.readonly = 1;
.name = "ssfdc",
.major = SSFDCR_MAJOR,
.part_bits = SSFDCR_PARTN_BITS,
+ .blksize = SECTOR_SIZE,
.getgeo = ssfdcr_getgeo,
.readsect = ssfdcr_readsect,
.add_mtd = ssfdcr_add_mtd,
* this round of polling
*/
if (rx_work) {
+ unsigned long flags;
+
if (cpr16(IntrStatus) & cp_rx_intr_mask)
goto rx_status_loop;
- local_irq_disable();
+ local_irq_save(flags);
cpw16_f(IntrMask, cp_intr_mask);
__netif_rx_complete(dev);
- local_irq_enable();
+ local_irq_restore(flags);
return 0; /* done */
}
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
u32 eor, flags;
+ unsigned long intr_flags;
#if CP_VLAN_TAG_USED
u32 vlan_tag = 0;
#endif
int mss = 0;
- spin_lock_irq(&cp->lock);
+ spin_lock_irqsave(&cp->lock, intr_flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
- spin_unlock_irq(&cp->lock);
+ spin_unlock_irqrestore(&cp->lock, intr_flags);
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
dev->name);
return 1;
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
- spin_unlock_irq(&cp->lock);
+ spin_unlock_irqrestore(&cp->lock, intr_flags);
cpw8(TxPoll, NormalTxPoll);
dev->trans_start = jiffies;
short length = skb->len;
dev->trans_start = jiffies;
- DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%x) called\n", dev->name,
- skb->len, (unsigned int)skb->data));
+ DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
+ dev->name, skb->len, skb->data));
if (skb->len < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
dev->priv = (void *)(dev->mem_start);
lp = dev->priv;
- DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%d bytes), lp->scb at 0x%08lx\n",
+ DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
+ "lp->scb at 0x%08lx\n",
dev->name, (unsigned long)lp,
sizeof(struct i596_private), (unsigned long)&lp->scb));
memset((void *) lp, 0, sizeof(struct i596_private));
#endif
-/*
- * The loopback device is global so it can be directly referenced
- * by the network code. Also, it must be first on device list.
- */
-extern int loopback_init(void);
-
/* Statically configured drivers -- order matters here. */
static int __init net_olddevs_init(void)
{
int num;
- if (loopback_init()) {
- printk(KERN_ERR "Network loopback device setup failed\n");
- }
-
-
#ifdef CONFIG_SBNI
for (num = 0; num < 8; ++num)
sbni_probe(num);
struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
{
struct net_device *dev;
- struct ep93xx_priv *ep;
dev = alloc_etherdev(sizeof(struct ep93xx_priv));
if (dev == NULL)
return NULL;
- ep = netdev_priv(dev);
memcpy(dev->dev_addr, data->dev_addr, ETH_ALEN);
struct ep93xx_priv *ep;
int err;
- data = pdev->dev.platform_data;
if (pdev == NULL)
return -ENODEV;
+ data = pdev->dev.platform_data;
dev = ep93xx_dev_alloc(data);
if (dev == NULL) {
static void b44_halt(struct b44 *);
static void b44_init_rings(struct b44 *);
+
+#define B44_FULL_RESET 1
+#define B44_FULL_RESET_SKIP_PHY 2
+#define B44_PARTIAL_RESET 3
+
static void b44_init_hw(struct b44 *, int);
static int dma_desc_align_mask;
dest_idx * sizeof(dest_desc),
DMA_BIDIRECTIONAL);
- pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
+ pci_dma_sync_single_for_device(bp->pdev, le32_to_cpu(src_desc->addr),
RX_PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
}
}
if (bp->istat & ISTAT_ERRORS) {
- spin_lock_irq(&bp->lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->lock, flags);
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET_SKIP_PHY);
netif_wake_queue(bp->dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
done = 1;
}
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
spin_unlock_irq(&bp->lock);
b44_halt(bp);
dev->mtu = new_mtu;
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
spin_unlock_irq(&bp->lock);
b44_enable_ints(bp);
* packet processing. Invoked with bp->lock held.
*/
static void __b44_set_rx_mode(struct net_device *);
-static void b44_init_hw(struct b44 *bp, int full_reset)
+static void b44_init_hw(struct b44 *bp, int reset_kind)
{
u32 val;
b44_chip_reset(bp);
- if (full_reset) {
+ if (reset_kind == B44_FULL_RESET) {
b44_phy_reset(bp);
b44_setup_phy(bp);
}
bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
- if (full_reset) {
+ if (reset_kind == B44_PARTIAL_RESET) {
+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+ } else {
bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
bp->rx_prod = bp->rx_pending;
bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
- } else {
- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
- (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
}
val = br32(bp, B44_ENET_CTRL);
goto out;
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
b44_check_phy(bp);
netif_poll_enable(dev);
if (bp->flags & B44_FLAG_WOL_ENABLE) {
- b44_init_hw(bp, 0);
+ b44_init_hw(bp, B44_PARTIAL_RESET);
b44_setup_wol(bp);
}
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
netif_wake_queue(bp->dev);
spin_unlock_irq(&bp->lock);
if (bp->flags & B44_FLAG_PAUSE_AUTO) {
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
} else {
__b44_set_flow_ctrl(bp, bp->flags);
}
free_irq(dev->irq, dev);
if (bp->flags & B44_FLAG_WOL_ENABLE) {
- b44_init_hw(bp, 0);
+ b44_init_hw(bp, B44_PARTIAL_RESET);
b44_setup_wol(bp);
}
pci_disable_device(pdev);
{
struct net_device *dev = pci_get_drvdata(pdev);
struct b44 *bp = netdev_priv(dev);
+ int rc = 0;
pci_restore_state(pdev);
- pci_enable_device(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ printk(KERN_ERR PFX "%s: pci_enable_device failed\n",
+ dev->name);
+ return rc;
+ }
+
pci_set_master(pdev);
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev))
+ rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
+ if (rc) {
printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+ pci_disable_device(pdev);
+ return rc;
+ }
spin_lock_irq(&bp->lock);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
netif_device_attach(bp->dev);
spin_unlock_irq(&bp->lock);
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5.1"
-#define DRV_MODULE_RELDATE "November 15, 2006"
+#define DRV_MODULE_VERSION "1.5.4"
+#define DRV_MODULE_RELDATE "January 24, 2007"
#define RUN_AT(x) (jiffies + (x))
u32 diff;
smp_mb();
- diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
- if (diff > MAX_TX_DESC_CNT)
- diff = (diff & MAX_TX_DESC_CNT) - 1;
+
+ /* The ring uses 256 indices for 255 entries, one of them
+ * needs to be skipped.
+ */
+ diff = bp->tx_prod - bp->tx_cons;
+ if (unlikely(diff >= TX_DESC_CNT)) {
+ diff &= 0xffff;
+ if (diff == TX_DESC_CNT)
+ diff = MAX_TX_DESC_CNT;
+ }
return (bp->tx_ring_size - diff);
}
{
u32 val;
- bp->phy_flags |= PHY_CRC_FIX_FLAG;
-
if (bp->phy_flags & PHY_CRC_FIX_FLAG) {
bnx2_write_phy(bp, 0x18, 0x0c00);
bnx2_write_phy(bp, 0x17, 0x000a);
int buf_size)
{
u32 written, offset32, len32;
- u8 *buf, start[4], end[4], *flash_buffer = NULL;
+ u8 *buf, start[4], end[4], *align_buf = NULL, *flash_buffer = NULL;
int rc = 0;
int align_start, align_end;
if ((align_start = (offset32 & 3))) {
offset32 &= ~3;
- len32 += align_start;
+ len32 += (4 - align_start);
if ((rc = bnx2_nvram_read(bp, offset32, start, 4)))
return rc;
}
}
if (align_start || align_end) {
- buf = kmalloc(len32, GFP_KERNEL);
- if (buf == 0)
+ align_buf = kmalloc(len32, GFP_KERNEL);
+ if (align_buf == NULL)
return -ENOMEM;
if (align_start) {
- memcpy(buf, start, 4);
+ memcpy(align_buf, start, 4);
}
if (align_end) {
- memcpy(buf + len32 - 4, end, 4);
+ memcpy(align_buf + len32 - 4, end, 4);
}
- memcpy(buf + align_start, data_buf, buf_size);
+ memcpy(align_buf + align_start, data_buf, buf_size);
+ buf = align_buf;
}
if (bp->flash_info->buffered == 0) {
}
nvram_write_end:
- if (bp->flash_info->buffered == 0)
- kfree(flash_buffer);
-
- if (align_start || align_end)
- kfree(buf);
+ kfree(flash_buffer);
+ kfree(align_buf);
return rc;
}
if (!skb)
return -ENOMEM;
packet = skb_put(skb, pkt_size);
- memcpy(packet, bp->mac_addr, 6);
+ memcpy(packet, bp->dev->dev_addr, 6);
memset(packet + 6, 0x0, 8);
for (i = 14; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
}
#endif
+static void __devinit
+bnx2_get_5709_media(struct bnx2 *bp)
+{
+ u32 val = REG_RD(bp, BNX2_MISC_DUAL_MEDIA_CTRL);
+ u32 bond_id = val & BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID;
+ u32 strap;
+
+ if (bond_id == BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_C)
+ return;
+ else if (bond_id == BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_S) {
+ bp->phy_flags |= PHY_SERDES_FLAG;
+ return;
+ }
+
+ if (val & BNX2_MISC_DUAL_MEDIA_CTRL_STRAP_OVERRIDE)
+ strap = (val & BNX2_MISC_DUAL_MEDIA_CTRL_PHY_CTRL) >> 21;
+ else
+ strap = (val & BNX2_MISC_DUAL_MEDIA_CTRL_PHY_CTRL_STRAP) >> 8;
+
+ if (PCI_FUNC(bp->pdev->devfn) == 0) {
+ switch (strap) {
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ bp->phy_flags |= PHY_SERDES_FLAG;
+ return;
+ }
+ } else {
+ switch (strap) {
+ case 0x1:
+ case 0x2:
+ case 0x4:
+ bp->phy_flags |= PHY_SERDES_FLAG;
+ return;
+ }
+ }
+}
+
static int __devinit
bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
{
reg = REG_RD_IND(bp, BNX2_SHM_HDR_SIGNATURE);
if ((reg & BNX2_SHM_HDR_SIGNATURE_SIG_MASK) ==
- BNX2_SHM_HDR_SIGNATURE_SIG)
- bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0);
- else
+ BNX2_SHM_HDR_SIGNATURE_SIG) {
+ u32 off = PCI_FUNC(pdev->devfn) << 2;
+
+ bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0 + off);
+ } else
bp->shmem_base = HOST_VIEW_SHMEM_BASE;
/* Get the permanent MAC address. First we need to make sure the
bp->phy_addr = 1;
/* Disable WOL support if we are running on a SERDES chip. */
- if (CHIP_NUM(bp) == CHIP_NUM_5709) {
- if (CHIP_BOND_ID(bp) != BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_C)
- bp->phy_flags |= PHY_SERDES_FLAG;
- } else if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT)
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ bnx2_get_5709_media(bp);
+ else if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT)
bp->phy_flags |= PHY_SERDES_FLAG;
if (bp->phy_flags & PHY_SERDES_FLAG) {
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
}
- }
+ } else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
+ CHIP_NUM(bp) == CHIP_NUM_5708)
+ bp->phy_flags |= PHY_CRC_FIX_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B0) ||
struct slave *next;
struct slave *prev;
int delay;
- u32 jiffies;
- u32 last_arp_rx;
+ unsigned long jiffies;
+ unsigned long last_arp_rx;
s8 link; /* one of BOND_LINK_XXXX */
s8 state; /* one of BOND_STATE_XXXX */
u32 original_flags;
return bond->params.arp_validate & (1 << slave->state);
}
-extern inline u32 slave_last_rx(struct bonding *bond, struct slave *slave)
+extern inline unsigned long slave_last_rx(struct bonding *bond,
+ struct slave *slave)
{
if (slave_do_arp_validate(bond, slave))
return slave->last_arp_rx;
{
struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
- if (cphy)
- cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops);
+ if (!cphy)
+ return NULL;
+ cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops);
INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
cphy->bmsr = 0;
del_timer_sync(&nic->watchdog);
netif_carrier_off(nic->netdev);
+ netif_device_detach(netdev);
pci_save_state(pdev);
if ((nic->flags & wol_magic) | e100_asf(nic)) {
}
pci_disable_device(pdev);
+ free_irq(pdev->irq, netdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
{ "rx_header_split", E1000_STAT(rx_hdr_split) },
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
};
#define E1000_QUEUE_STATS_LEN 0
int32_t
e1000_set_mac_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_mac_type");
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82542:
- switch (hw->revision_id) {
- case E1000_82542_2_0_REV_ID:
- hw->mac_type = e1000_82542_rev2_0;
- break;
- case E1000_82542_2_1_REV_ID:
- hw->mac_type = e1000_82542_rev2_1;
- break;
- default:
- /* Invalid 82542 revision ID */
- return -E1000_ERR_MAC_TYPE;
- }
- break;
- case E1000_DEV_ID_82543GC_FIBER:
- case E1000_DEV_ID_82543GC_COPPER:
- hw->mac_type = e1000_82543;
- break;
- case E1000_DEV_ID_82544EI_COPPER:
- case E1000_DEV_ID_82544EI_FIBER:
- case E1000_DEV_ID_82544GC_COPPER:
- case E1000_DEV_ID_82544GC_LOM:
- hw->mac_type = e1000_82544;
- break;
- case E1000_DEV_ID_82540EM:
- case E1000_DEV_ID_82540EM_LOM:
- case E1000_DEV_ID_82540EP:
- case E1000_DEV_ID_82540EP_LOM:
- case E1000_DEV_ID_82540EP_LP:
- hw->mac_type = e1000_82540;
- break;
- case E1000_DEV_ID_82545EM_COPPER:
- case E1000_DEV_ID_82545EM_FIBER:
- hw->mac_type = e1000_82545;
- break;
- case E1000_DEV_ID_82545GM_COPPER:
- case E1000_DEV_ID_82545GM_FIBER:
- case E1000_DEV_ID_82545GM_SERDES:
- hw->mac_type = e1000_82545_rev_3;
- break;
- case E1000_DEV_ID_82546EB_COPPER:
- case E1000_DEV_ID_82546EB_FIBER:
- case E1000_DEV_ID_82546EB_QUAD_COPPER:
- hw->mac_type = e1000_82546;
- break;
- case E1000_DEV_ID_82546GB_COPPER:
- case E1000_DEV_ID_82546GB_FIBER:
- case E1000_DEV_ID_82546GB_SERDES:
- case E1000_DEV_ID_82546GB_PCIE:
- case E1000_DEV_ID_82546GB_QUAD_COPPER:
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- hw->mac_type = e1000_82546_rev_3;
- break;
- case E1000_DEV_ID_82541EI:
- case E1000_DEV_ID_82541EI_MOBILE:
- case E1000_DEV_ID_82541ER_LOM:
- hw->mac_type = e1000_82541;
- break;
- case E1000_DEV_ID_82541ER:
- case E1000_DEV_ID_82541GI:
- case E1000_DEV_ID_82541GI_LF:
- case E1000_DEV_ID_82541GI_MOBILE:
- hw->mac_type = e1000_82541_rev_2;
- break;
- case E1000_DEV_ID_82547EI:
- case E1000_DEV_ID_82547EI_MOBILE:
- hw->mac_type = e1000_82547;
- break;
- case E1000_DEV_ID_82547GI:
- hw->mac_type = e1000_82547_rev_2;
- break;
- case E1000_DEV_ID_82571EB_COPPER:
- case E1000_DEV_ID_82571EB_FIBER:
- case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
- hw->mac_type = e1000_82571;
- break;
- case E1000_DEV_ID_82572EI_COPPER:
- case E1000_DEV_ID_82572EI_FIBER:
- case E1000_DEV_ID_82572EI_SERDES:
- case E1000_DEV_ID_82572EI:
- hw->mac_type = e1000_82572;
- break;
- case E1000_DEV_ID_82573E:
- case E1000_DEV_ID_82573E_IAMT:
- case E1000_DEV_ID_82573L:
- hw->mac_type = e1000_82573;
- break;
- case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
- case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
- case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
- case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
- hw->mac_type = e1000_80003es2lan;
- break;
- case E1000_DEV_ID_ICH8_IGP_M_AMT:
- case E1000_DEV_ID_ICH8_IGP_AMT:
- case E1000_DEV_ID_ICH8_IGP_C:
- case E1000_DEV_ID_ICH8_IFE:
- case E1000_DEV_ID_ICH8_IFE_GT:
- case E1000_DEV_ID_ICH8_IFE_G:
- case E1000_DEV_ID_ICH8_IGP_M:
- hw->mac_type = e1000_ich8lan;
- break;
- default:
- /* Should never have loaded on this device */
- return -E1000_ERR_MAC_TYPE;
- }
-
- switch (hw->mac_type) {
- case e1000_ich8lan:
- hw->swfwhw_semaphore_present = TRUE;
- hw->asf_firmware_present = TRUE;
- break;
- case e1000_80003es2lan:
- hw->swfw_sync_present = TRUE;
- /* fall through */
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- hw->eeprom_semaphore_present = TRUE;
- /* fall through */
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- hw->asf_firmware_present = TRUE;
- break;
- default:
- break;
- }
-
- return E1000_SUCCESS;
+ DEBUGFUNC("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ case E1000_DEV_ID_82571EB_COPPER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ hw->mac_type = e1000_82571;
+ break;
+ case E1000_DEV_ID_82572EI_COPPER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82572EI:
+ hw->mac_type = e1000_82572;
+ break;
+ case E1000_DEV_ID_82573E:
+ case E1000_DEV_ID_82573E_IAMT:
+ case E1000_DEV_ID_82573L:
+ hw->mac_type = e1000_82573;
+ break;
+ case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
+ case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->mac_type = e1000_80003es2lan;
+ break;
+ case E1000_DEV_ID_ICH8_IGP_M_AMT:
+ case E1000_DEV_ID_ICH8_IGP_AMT:
+ case E1000_DEV_ID_ICH8_IGP_C:
+ case E1000_DEV_ID_ICH8_IFE:
+ case E1000_DEV_ID_ICH8_IFE_GT:
+ case E1000_DEV_ID_ICH8_IFE_G:
+ case E1000_DEV_ID_ICH8_IGP_M:
+ hw->mac_type = e1000_ich8lan;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_ich8lan:
+ hw->swfwhw_semaphore_present = TRUE;
+ hw->asf_firmware_present = TRUE;
+ break;
+ case e1000_80003es2lan:
+ hw->swfw_sync_present = TRUE;
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ hw->eeprom_semaphore_present = TRUE;
+ /* fall through */
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = TRUE;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = TRUE;
+
+ /* capable of receiving management packets to the host */
+ if (hw->mac_type >= e1000_82571)
+ hw->has_manc2h = TRUE;
+
+ /* In rare occasions, ESB2 systems would end up started without
+ * the RX unit being turned on.
+ */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->rx_needs_kicking = TRUE;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = TRUE;
+
+ return E1000_SUCCESS;
}
/*****************************************************************************
switch (hw->mac_type) {
case e1000_82542_rev2_0:
case e1000_82542_rev2_1:
- hw->bus_type = e1000_bus_type_unknown;
+ hw->bus_type = e1000_bus_type_pci;
hw->bus_speed = e1000_bus_speed_unknown;
hw->bus_width = e1000_bus_width_unknown;
break;
fwsm = E1000_READ_REG(hw, FWSM);
factps = E1000_READ_REG(hw, FACTPS);
- if (((fwsm & E1000_FWSM_MODE_MASK) ==
- (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)) &&
- (factps & E1000_FACTPS_MNGCG))
+ if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
+ e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
return TRUE;
} else
if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
#define E1000_82542_RSSIR E1000_RSSIR
#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+#define E1000_82542_MANC2H E1000_MANC2H
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
- uint64_t crcerrs;
- uint64_t algnerrc;
- uint64_t symerrs;
- uint64_t rxerrc;
- uint64_t txerrc;
- uint64_t mpc;
- uint64_t scc;
- uint64_t ecol;
- uint64_t mcc;
- uint64_t latecol;
- uint64_t colc;
- uint64_t dc;
- uint64_t tncrs;
- uint64_t sec;
- uint64_t cexterr;
- uint64_t rlec;
- uint64_t xonrxc;
- uint64_t xontxc;
- uint64_t xoffrxc;
- uint64_t xofftxc;
- uint64_t fcruc;
- uint64_t prc64;
- uint64_t prc127;
- uint64_t prc255;
- uint64_t prc511;
- uint64_t prc1023;
- uint64_t prc1522;
- uint64_t gprc;
- uint64_t bprc;
- uint64_t mprc;
- uint64_t gptc;
- uint64_t gorcl;
- uint64_t gorch;
- uint64_t gotcl;
- uint64_t gotch;
- uint64_t rnbc;
- uint64_t ruc;
- uint64_t rfc;
- uint64_t roc;
- uint64_t rlerrc;
- uint64_t rjc;
- uint64_t mgprc;
- uint64_t mgpdc;
- uint64_t mgptc;
- uint64_t torl;
- uint64_t torh;
- uint64_t totl;
- uint64_t toth;
- uint64_t tpr;
- uint64_t tpt;
- uint64_t ptc64;
- uint64_t ptc127;
- uint64_t ptc255;
- uint64_t ptc511;
- uint64_t ptc1023;
- uint64_t ptc1522;
- uint64_t mptc;
- uint64_t bptc;
- uint64_t tsctc;
- uint64_t tsctfc;
- uint64_t iac;
- uint64_t icrxptc;
- uint64_t icrxatc;
- uint64_t ictxptc;
- uint64_t ictxatc;
- uint64_t ictxqec;
- uint64_t ictxqmtc;
- uint64_t icrxdmtc;
- uint64_t icrxoc;
+ uint64_t crcerrs;
+ uint64_t algnerrc;
+ uint64_t symerrs;
+ uint64_t rxerrc;
+ uint64_t txerrc;
+ uint64_t mpc;
+ uint64_t scc;
+ uint64_t ecol;
+ uint64_t mcc;
+ uint64_t latecol;
+ uint64_t colc;
+ uint64_t dc;
+ uint64_t tncrs;
+ uint64_t sec;
+ uint64_t cexterr;
+ uint64_t rlec;
+ uint64_t xonrxc;
+ uint64_t xontxc;
+ uint64_t xoffrxc;
+ uint64_t xofftxc;
+ uint64_t fcruc;
+ uint64_t prc64;
+ uint64_t prc127;
+ uint64_t prc255;
+ uint64_t prc511;
+ uint64_t prc1023;
+ uint64_t prc1522;
+ uint64_t gprc;
+ uint64_t bprc;
+ uint64_t mprc;
+ uint64_t gptc;
+ uint64_t gorcl;
+ uint64_t gorch;
+ uint64_t gotcl;
+ uint64_t gotch;
+ uint64_t rnbc;
+ uint64_t ruc;
+ uint64_t rfc;
+ uint64_t roc;
+ uint64_t rlerrc;
+ uint64_t rjc;
+ uint64_t mgprc;
+ uint64_t mgpdc;
+ uint64_t mgptc;
+ uint64_t torl;
+ uint64_t torh;
+ uint64_t totl;
+ uint64_t toth;
+ uint64_t tpr;
+ uint64_t tpt;
+ uint64_t ptc64;
+ uint64_t ptc127;
+ uint64_t ptc255;
+ uint64_t ptc511;
+ uint64_t ptc1023;
+ uint64_t ptc1522;
+ uint64_t mptc;
+ uint64_t bptc;
+ uint64_t tsctc;
+ uint64_t tsctfc;
+ uint64_t iac;
+ uint64_t icrxptc;
+ uint64_t icrxatc;
+ uint64_t ictxptc;
+ uint64_t ictxatc;
+ uint64_t ictxqec;
+ uint64_t ictxqmtc;
+ uint64_t icrxdmtc;
+ uint64_t icrxoc;
};
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
- uint8_t __iomem *hw_addr;
- uint8_t __iomem *flash_address;
- e1000_mac_type mac_type;
- e1000_phy_type phy_type;
- uint32_t phy_init_script;
- e1000_media_type media_type;
- void *back;
- struct e1000_shadow_ram *eeprom_shadow_ram;
- uint32_t flash_bank_size;
- uint32_t flash_base_addr;
- e1000_fc_type fc;
- e1000_bus_speed bus_speed;
- e1000_bus_width bus_width;
- e1000_bus_type bus_type;
- struct e1000_eeprom_info eeprom;
- e1000_ms_type master_slave;
- e1000_ms_type original_master_slave;
- e1000_ffe_config ffe_config_state;
- uint32_t asf_firmware_present;
- uint32_t eeprom_semaphore_present;
- uint32_t swfw_sync_present;
- uint32_t swfwhw_semaphore_present;
- unsigned long io_base;
- uint32_t phy_id;
- uint32_t phy_revision;
- uint32_t phy_addr;
- uint32_t original_fc;
- uint32_t txcw;
- uint32_t autoneg_failed;
- uint32_t max_frame_size;
- uint32_t min_frame_size;
- uint32_t mc_filter_type;
- uint32_t num_mc_addrs;
- uint32_t collision_delta;
- uint32_t tx_packet_delta;
- uint32_t ledctl_default;
- uint32_t ledctl_mode1;
- uint32_t ledctl_mode2;
- boolean_t tx_pkt_filtering;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
- uint16_t phy_spd_default;
- uint16_t autoneg_advertised;
- uint16_t pci_cmd_word;
- uint16_t fc_high_water;
- uint16_t fc_low_water;
- uint16_t fc_pause_time;
- uint16_t current_ifs_val;
- uint16_t ifs_min_val;
- uint16_t ifs_max_val;
- uint16_t ifs_step_size;
- uint16_t ifs_ratio;
- uint16_t device_id;
- uint16_t vendor_id;
- uint16_t subsystem_id;
- uint16_t subsystem_vendor_id;
- uint8_t revision_id;
- uint8_t autoneg;
- uint8_t mdix;
- uint8_t forced_speed_duplex;
- uint8_t wait_autoneg_complete;
- uint8_t dma_fairness;
- uint8_t mac_addr[NODE_ADDRESS_SIZE];
- uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
- boolean_t disable_polarity_correction;
- boolean_t speed_downgraded;
- e1000_smart_speed smart_speed;
- e1000_dsp_config dsp_config_state;
- boolean_t get_link_status;
- boolean_t serdes_link_down;
- boolean_t tbi_compatibility_en;
- boolean_t tbi_compatibility_on;
- boolean_t laa_is_present;
- boolean_t phy_reset_disable;
- boolean_t initialize_hw_bits_disable;
- boolean_t fc_send_xon;
- boolean_t fc_strict_ieee;
- boolean_t report_tx_early;
- boolean_t adaptive_ifs;
- boolean_t ifs_params_forced;
- boolean_t in_ifs_mode;
- boolean_t mng_reg_access_disabled;
- boolean_t leave_av_bit_off;
- boolean_t kmrn_lock_loss_workaround_disabled;
+ uint8_t __iomem *hw_addr;
+ uint8_t __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ uint32_t phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ uint32_t flash_bank_size;
+ uint32_t flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ uint32_t asf_firmware_present;
+ uint32_t eeprom_semaphore_present;
+ uint32_t swfw_sync_present;
+ uint32_t swfwhw_semaphore_present;
+ unsigned long io_base;
+ uint32_t phy_id;
+ uint32_t phy_revision;
+ uint32_t phy_addr;
+ uint32_t original_fc;
+ uint32_t txcw;
+ uint32_t autoneg_failed;
+ uint32_t max_frame_size;
+ uint32_t min_frame_size;
+ uint32_t mc_filter_type;
+ uint32_t num_mc_addrs;
+ uint32_t collision_delta;
+ uint32_t tx_packet_delta;
+ uint32_t ledctl_default;
+ uint32_t ledctl_mode1;
+ uint32_t ledctl_mode2;
+ boolean_t tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ uint16_t phy_spd_default;
+ uint16_t autoneg_advertised;
+ uint16_t pci_cmd_word;
+ uint16_t fc_high_water;
+ uint16_t fc_low_water;
+ uint16_t fc_pause_time;
+ uint16_t current_ifs_val;
+ uint16_t ifs_min_val;
+ uint16_t ifs_max_val;
+ uint16_t ifs_step_size;
+ uint16_t ifs_ratio;
+ uint16_t device_id;
+ uint16_t vendor_id;
+ uint16_t subsystem_id;
+ uint16_t subsystem_vendor_id;
+ uint8_t revision_id;
+ uint8_t autoneg;
+ uint8_t mdix;
+ uint8_t forced_speed_duplex;
+ uint8_t wait_autoneg_complete;
+ uint8_t dma_fairness;
+ uint8_t mac_addr[NODE_ADDRESS_SIZE];
+ uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
+ boolean_t disable_polarity_correction;
+ boolean_t speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ boolean_t get_link_status;
+ boolean_t serdes_link_down;
+ boolean_t tbi_compatibility_en;
+ boolean_t tbi_compatibility_on;
+ boolean_t laa_is_present;
+ boolean_t phy_reset_disable;
+ boolean_t initialize_hw_bits_disable;
+ boolean_t fc_send_xon;
+ boolean_t fc_strict_ieee;
+ boolean_t report_tx_early;
+ boolean_t adaptive_ifs;
+ boolean_t ifs_params_forced;
+ boolean_t in_ifs_mode;
+ boolean_t mng_reg_access_disabled;
+ boolean_t leave_av_bit_off;
+ boolean_t kmrn_lock_loss_workaround_disabled;
+ boolean_t bad_tx_carr_stats_fd;
+ boolean_t has_manc2h;
+ boolean_t rx_needs_kicking;
+ boolean_t has_smbus;
};
#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
#define E1000_PBA_30K 0x001E
extern void e1000_check_options(struct e1000_adapter *adapter);
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state);
static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
printk(KERN_INFO "%s\n", e1000_copyright);
ret = pci_register_driver(&e1000_driver);
-
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ printk(KERN_INFO "e1000: copybreak disabled\n");
+ else
+ printk(KERN_INFO "e1000: copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
return ret;
}
}
}
+static void
+e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ if (adapter->en_mng_pt) {
+ uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ /* enable receiving management packets to the host */
+ /* this will probably generate destination unreachable messages
+ * from the host OS, but the packets will be handled on SMBUS */
+ if (adapter->hw.has_manc2h) {
+ uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
+
+ manc |= E1000_MANC_EN_MNG2HOST;
+#define E1000_MNG2HOST_PORT_623 (1 << 5)
+#define E1000_MNG2HOST_PORT_664 (1 << 6)
+ manc2h |= E1000_MNG2HOST_PORT_623;
+ manc2h |= E1000_MNG2HOST_PORT_664;
+ E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
+ }
+
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+}
+
+static void
+e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ if (adapter->en_mng_pt) {
+ uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ if (adapter->hw.has_manc2h)
+ manc &= ~E1000_MANC_EN_MNG2HOST;
+
+ /* don't explicitly have to mess with MANC2H since
+ * MANC has an enable disable that gates MANC2H */
+
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+}
+
int
e1000_up(struct e1000_adapter *adapter)
{
e1000_set_multi(netdev);
e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
clear_bit(__E1000_DOWN, &adapter->flags);
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+ /* fire a link change interrupt to start the watchdog */
+ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
return 0;
}
void
e1000_reset(struct e1000_adapter *adapter)
{
- uint32_t pba, manc;
+ uint32_t pba = 0, tx_space, min_tx_space, min_rx_space;
uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
+ boolean_t legacy_pba_adjust = FALSE;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
*/
switch (adapter->hw.mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = TRUE;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
case e1000_82547:
case e1000_82547_rev_2:
+ legacy_pba_adjust = TRUE;
pba = E1000_PBA_30K;
break;
case e1000_82571:
pba = E1000_PBA_38K;
break;
case e1000_82573:
- pba = E1000_PBA_12K;
+ pba = E1000_PBA_20K;
break;
case e1000_ich8lan:
pba = E1000_PBA_8K;
- break;
- default:
- pba = E1000_PBA_48K;
+ case e1000_undefined:
+ case e1000_num_macs:
break;
}
- if ((adapter->hw.mac_type != e1000_82573) &&
- (adapter->netdev->mtu > E1000_RXBUFFER_8192))
- pba -= 8; /* allocate more FIFO for Tx */
+ if (legacy_pba_adjust == TRUE) {
+ if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+ if (adapter->hw.mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (adapter->hw.max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ /* adjust PBA for jumbo frames */
+ E1000_WRITE_REG(&adapter->hw, PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accomodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accomodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = E1000_READ_REG(&adapter->hw, PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* don't include ethernet FCS because hardware appends/strips */
+ min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
+ VLAN_TAG_SIZE;
+ min_tx_space = min_rx_space;
+ min_tx_space *= 2;
+ E1000_ROUNDUP(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ E1000_ROUNDUP(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (adapter->hw.mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
- if (adapter->hw.mac_type == e1000_82547) {
- adapter->tx_fifo_head = 0;
- adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
- adapter->tx_fifo_size =
- (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
- atomic_set(&adapter->tx_fifo_stall, 0);
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space) {
+ switch (adapter->hw.mac_type) {
+ case e1000_82573:
+ /* ERT enabled in e1000_configure_rx */
+ break;
+ default:
+ pba = min_rx_space;
+ break;
+ }
+ }
+ }
}
E1000_WRITE_REG(&adapter->hw, PBA, pba);
if (e1000_init_hw(&adapter->hw))
DPRINTK(PROBE, ERR, "Hardware Error\n");
e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (adapter->hw.mac_type >= e1000_82544 &&
+ adapter->hw.mac_type <= e1000_82547_rev_2 &&
+ adapter->hw.autoneg == 1 &&
+ adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) {
+ uint32_t ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ }
+
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
phy_data);
}
- if ((adapter->en_mng_pt) &&
- (adapter->hw.mac_type >= e1000_82540) &&
- (adapter->hw.mac_type < e1000_82571) &&
- (adapter->hw.media_type == e1000_media_type_copper)) {
- manc = E1000_READ_REG(&adapter->hw, MANC);
- manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
- E1000_WRITE_REG(&adapter->hw, MANC, manc);
- }
+ e1000_release_manageability(adapter);
}
/**
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t manc;
#ifdef CONFIG_E1000_NAPI
int i;
#endif
flush_scheduled_work();
- if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
- manc = E1000_READ_REG(&adapter->hw, MANC);
- if (manc & E1000_MANC_SMBUS_EN) {
- manc |= E1000_MANC_ARP_EN;
- E1000_WRITE_REG(&adapter->hw, MANC, manc);
- }
- }
+ e1000_release_manageability(adapter);
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
}
/* Set the default values for the Tx Inter Packet Gap timer */
-
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes)
+ if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
+ (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
netif_wake_queue(netdev);
mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
adapter->smartspeed = 0;
+ } else {
+ /* make sure the receive unit is started */
+ if (adapter->hw.rx_needs_kicking) {
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl | E1000_RCTL_EN);
+ }
}
} else {
if (netif_carrier_ok(netdev)) {
if (packets == 0)
goto update_itr_done;
-
switch (itr_setting) {
case lowest_latency:
- if ((packets < 5) && (bytes > 512))
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
retval = low_latency;
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
- if ((packets < 10) ||
- ((bytes/packets) > 1200))
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
else if ((packets > 35))
retval = lowest_latency;
- } else if (packets <= 2 && bytes < 512)
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
retval = lowest_latency;
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
if (packets > 35)
retval = low_latency;
- } else {
- if (bytes < 6000)
- retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
}
break;
}
adapter->tx_itr,
adapter->total_tx_packets,
adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
adapter->rx_itr = e1000_update_itr(adapter,
adapter->rx_itr,
adapter->total_rx_packets,
adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
current_itr = max(adapter->rx_itr, adapter->tx_itr);
- /* conservative mode eliminates the lowest_latency setting */
- if (current_itr == lowest_latency && (adapter->itr_setting == 3))
- current_itr = low_latency;
-
switch (current_itr) {
/* counts and packets in update_itr are dependent on these numbers */
case lowest_latency:
if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
switch (adapter->hw.mac_type) {
unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb->tail - 1) & 4)
+ break;
+ /* fall through */
case e1000_82571:
case e1000_82572:
case e1000_82573:
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
netdev->mtu = new_mtu;
+ adapter->hw.max_frame_size = max_frame;
if (netif_running(netdev))
e1000_reinit_locked(adapter);
- adapter->hw.max_frame_size = max_frame;
-
return 0;
}
adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
adapter->net_stats.tx_window_errors = adapter->stats.latecol;
adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (adapter->hw.bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ adapter->net_stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
/* Tx Dropped needs to be maintained elsewhere */
adapter->phy_stats.receive_errors += phy_tmp;
}
+ /* Management Stats */
+ if (adapter->hw.has_smbus) {
+ adapter->stats.mgptc += E1000_READ_REG(hw, MGTPTC);
+ adapter->stats.mgprc += E1000_READ_REG(hw, MGTPRC);
+ adapter->stats.mgpdc += E1000_READ_REG(hw, MGTPDC);
+ }
+
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
#ifdef CONFIG_PCI_MSI
cleaned = (i == eop);
if (cleaned) {
- /* this packet count is wrong for TSO but has a
- * tendency to make dynamic ITR change more
- * towards bulk */
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs = skb_shinfo(skb)->gso_segs;
+ total_tx_packets += segs;
total_tx_packets++;
- total_tx_bytes += buffer_info->skb->len;
+ total_tx_bytes += skb->len;
}
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->upper.data = 0;
/* code added for copybreak, this should improve
* performance for small packets with large amounts
* of reassembly being done in the stack */
-#define E1000_CB_LENGTH 256
- if (length < E1000_CB_LENGTH) {
+ if (length < copybreak) {
struct sk_buff *new_skb =
netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
if (new_skb) {
/* page alloc/put takes too long and effects small packet
* throughput, so unsplit small packets and save the alloc/put*/
- if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
+ if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr;
/* there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t ctrl, ctrl_ext, rctl, manc, status;
+ uint32_t ctrl, ctrl_ext, rctl, status;
uint32_t wufc = adapter->wol;
#ifdef CONFIG_PM
int retval = 0;
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
- manc = E1000_READ_REG(&adapter->hw, MANC);
- if (manc & E1000_MANC_SMBUS_EN) {
- manc |= E1000_MANC_ARP_EN;
- E1000_WRITE_REG(&adapter->hw, MANC, manc);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- }
+ e1000_release_manageability(adapter);
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt) {
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
}
if (adapter->hw.phy_type == e1000_phy_igp_3)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t manc, err;
+ uint32_t err;
pci_set_power_state(pdev, PCI_D0);
e1000_pci_restore_state(adapter);
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+ e1000_init_manageability(adapter);
+
if (netif_running(netdev))
e1000_up(adapter);
netif_device_attach(netdev);
- if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
- manc = E1000_READ_REG(&adapter->hw, MANC);
- manc &= ~(E1000_MANC_ARP_EN);
- E1000_WRITE_REG(&adapter->hw, MANC, manc);
- }
-
/* If the controller is 82573 and f/w is AMT, do not set
* DRV_LOAD until the interface is up. For all other cases,
* let the f/w know that the h/w is now under the control
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev->priv;
- uint32_t manc, swsm;
+
+ e1000_init_manageability(adapter);
if (netif_running(netdev)) {
if (e1000_up(adapter)) {
netif_device_attach(netdev);
- if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
- manc = E1000_READ_REG(&adapter->hw, MANC);
- manc &= ~(E1000_MANC_ARP_EN);
- E1000_WRITE_REG(&adapter->hw, MANC, manc);
- }
-
- switch (adapter->hw.mac_type) {
- case e1000_82573:
- swsm = E1000_READ_REG(&adapter->hw, SWSM);
- E1000_WRITE_REG(&adapter->hw, SWSM,
- swsm | E1000_SWSM_DRV_LOAD);
- break;
- default:
- break;
- }
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (adapter->hw.mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(&adapter->hw))
+ e1000_get_hw_control(adapter);
- if (netif_running(netdev))
- mod_timer(&adapter->watchdog_timer, jiffies);
}
/* e1000_main.c */
e1000_validate_option(&adapter->itr, &opt,
adapter);
/* save the setting, because the dynamic bits change itr */
- adapter->itr_setting = adapter->itr;
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
break;
}
} else {
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0043"
+#define DRV_VERSION "EHEA_0045"
#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
u32 qp_token;
eqe = ehea_poll_eq(port->qp_eq);
- ehea_debug("eqe=%p", eqe);
+
while (eqe) {
- ehea_debug("*eqe=%lx", *(u64*)eqe);
- eqe = ehea_poll_eq(port->qp_eq);
qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
- ehea_debug("next eqe=%p", eqe);
+ ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
+ eqe->entry, qp_token);
+ eqe = ehea_poll_eq(port->qp_eq);
}
return IRQ_HANDLED;
int i;
for (i = 0; i < adapter->num_ports; i++)
- if (adapter->port[i]->logical_port_id == logical_port)
- return adapter->port[i];
+ if (adapter->port[i])
+ if (adapter->port[i]->logical_port_id == logical_port)
+ return adapter->port[i];
return NULL;
}
break;
}
+ port->autoneg = 1;
+
/* Number of default QPs */
port->num_def_qps = cb0->num_default_qps;
}
} else {
if (hret == H_AUTHORITY) {
- ehea_info("Hypervisor denied setting port speed. Either"
- " this partition is not authorized to set "
- "port speed or another partition has modified"
- " port speed first.");
+ ehea_info("Hypervisor denied setting port speed");
ret = -EPERM;
} else {
ret = -EIO;
| EHEA_BMASK_SET(PXLY_RC_JUMBO_FRAME, 1);
for (i = 0; i < port->num_def_qps; i++)
- cb0->default_qpn_arr[i] = port->port_res[i].qp->init_attr.qp_nr;
+ cb0->default_qpn_arr[i] = port->port_res[0].qp->init_attr.qp_nr;
if (netif_msg_ifup(port))
ehea_dump(cb0, sizeof(*cb0), "ehea_configure_port");
static void ehea_promiscuous_error(u64 hret, int enable)
{
- ehea_info("Hypervisor denied %sabling promiscuous mode.%s",
- enable == 1 ? "en" : "dis",
- hret != H_AUTHORITY ? "" : " Another partition owning a "
- "logical port on the same physical port might have altered "
- "promiscuous mode first.");
+ if (hret == H_AUTHORITY)
+ ehea_info("Hypervisor denied %sabling promiscuous mode",
+ enable == 1 ? "en" : "dis");
+ else
+ ehea_error("failed %sabling promiscuous mode",
+ enable == 1 ? "en" : "dis");
}
static void ehea_promiscuous(struct net_device *dev, int enable)
int ehea_sense_adapter_attr(struct ehea_adapter *adapter)
{
struct hcp_query_ehea *cb;
+ struct device_node *lhea_dn = NULL;
+ struct device_node *eth_dn = NULL;
u64 hret;
int ret;
goto out_herr;
}
- adapter->num_ports = cb->num_ports;
+ /* Determine the number of available logical ports
+ * by counting the child nodes of the lhea OFDT entry
+ */
+ adapter->num_ports = 0;
+ lhea_dn = of_find_node_by_name(lhea_dn, "lhea");
+ do {
+ eth_dn = of_get_next_child(lhea_dn, eth_dn);
+ if (eth_dn)
+ adapter->num_ports++;
+ } while ( eth_dn );
+ of_node_put(lhea_dn);
+
adapter->max_mc_mac = cb->max_mc_mac - 1;
ret = 0;
struct ehea_adapter *adapter = port->adapter;
struct hcp_ehea_port_cb4 *cb4;
u32 *dn_log_port_id;
+ int jumbo = 0;
sema_init(&port->port_lock, 1);
port->state = EHEA_PORT_DOWN;
INIT_LIST_HEAD(&port->mc_list->list);
- ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
-
ret = ehea_sense_port_attr(port);
if (ret)
goto out;
if (!cb4) {
ehea_error("no mem for cb4");
} else {
- cb4->jumbo_frame = 1;
- hret = ehea_h_modify_ehea_port(adapter->handle,
- port->logical_port_id,
- H_PORT_CB4, H_PORT_CB4_JUMBO,
- cb4);
- if (hret != H_SUCCESS) {
- ehea_info("Jumbo frames not activated");
+ hret = ehea_h_query_ehea_port(adapter->handle,
+ port->logical_port_id,
+ H_PORT_CB4,
+ H_PORT_CB4_JUMBO, cb4);
+
+ if (hret == H_SUCCESS) {
+ if (cb4->jumbo_frame)
+ jumbo = 1;
+ else {
+ cb4->jumbo_frame = 1;
+ hret = ehea_h_modify_ehea_port(adapter->handle,
+ port->
+ logical_port_id,
+ H_PORT_CB4,
+ H_PORT_CB4_JUMBO,
+ cb4);
+ if (hret == H_SUCCESS)
+ jumbo = 1;
+ }
}
kfree(cb4);
}
goto out_free;
}
+ ehea_info("%s: Jumbo frames are %sabled", dev->name,
+ jumbo == 1 ? "en" : "dis");
+
port->netdev = dev;
ret = 0;
goto out;
adapter_handle = (u64*)get_property(dev->ofdev.node, "ibm,hea-handle",
NULL);
- if (!adapter_handle) {
+ if (adapter_handle)
+ adapter->handle = *adapter_handle;
+
+ if (!adapter->handle) {
dev_err(&dev->ofdev.dev, "failed getting handle for adapter"
" '%s'\n", dev->ofdev.node->full_name);
ret = -ENODEV;
goto out_free_ad;
}
- adapter->handle = *adapter_handle;
adapter->pd = EHEA_PD_ID;
dev->ofdev.dev.driver_data = adapter;
destroy_workqueue(adapter->ehea_wq);
ibmebus_free_irq(NULL, adapter->neq->attr.ist1, adapter);
+ tasklet_kill(&adapter->neq_tasklet);
ehea_destroy_eq(adapter->neq);
{
long ret;
int i, sleep_msecs;
+ u8 cb_cat;
for (i = 0; i < 5; i++) {
ret = plpar_hcall9(opcode, outs,
continue;
}
- if (ret < H_SUCCESS)
+ cb_cat = EHEA_BMASK_GET(H_MEHEAPORT_CAT, arg2);
+
+ if ((ret < H_SUCCESS) && !(((ret == H_AUTHORITY)
+ && (opcode == H_MODIFY_HEA_PORT))
+ && (((cb_cat == H_PORT_CB4) && ((arg3 == H_PORT_CB4_JUMBO)
+ || (arg3 == H_PORT_CB4_SPEED))) || ((cb_cat == H_PORT_CB7)
+ && (arg3 == H_PORT_CB7_DUCQPN)))))
ehea_error("opcode=%lx ret=%lx"
" arg1=%lx arg2=%lx arg3=%lx arg4=%lx"
" arg5=%lx arg6=%lx arg7=%lx arg8=%lx"
outs[0], outs[1], outs[2], outs[3],
outs[4], outs[5], outs[6], outs[7],
outs[8]);
-
return ret;
}
*
* Note: This driver is a cleanroom reimplementation based on reverse
* engineered documentation written by Carl-Daniel Hailfinger
- * and Andrew de Quincey. It's neither supported nor endorsed
- * by NVIDIA Corp. Use at your own risk.
+ * and Andrew de Quincey.
*
* NVIDIA, nForce and other NVIDIA marks are trademarks or registered
* trademarks of NVIDIA Corporation in the United States and other
* Copyright (C) 2004 Andrew de Quincey (wol support)
* Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane
* IRQ rate fixes, bigendian fixes, cleanups, verification)
- * Copyright (c) 2004 NVIDIA Corporation
+ * Copyright (c) 2004,5,6 NVIDIA Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define NVREG_XMITCTL_HOST_SEMA_MASK 0x0000f000
#define NVREG_XMITCTL_HOST_SEMA_ACQ 0x0000f000
#define NVREG_XMITCTL_HOST_LOADED 0x00004000
+#define NVREG_XMITCTL_TX_PATH_EN 0x01000000
NvRegTransmitterStatus = 0x088,
#define NVREG_XMITSTAT_BUSY 0x01
#define NVREG_OFFLOAD_NORMAL RX_NIC_BUFSIZE
NvRegReceiverControl = 0x094,
#define NVREG_RCVCTL_START 0x01
+#define NVREG_RCVCTL_RX_PATH_EN 0x01000000
NvRegReceiverStatus = 0x98,
#define NVREG_RCVSTAT_BUSY 0x01
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 rx_ctrl = readl(base + NvRegReceiverControl);
dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name);
/* Already running? Stop it. */
- if (readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) {
- writel(0, base + NvRegReceiverControl);
+ if ((readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) && !np->mac_in_use) {
+ rx_ctrl &= ~NVREG_RCVCTL_START;
+ writel(rx_ctrl, base + NvRegReceiverControl);
pci_push(base);
}
writel(np->linkspeed, base + NvRegLinkSpeed);
pci_push(base);
- writel(NVREG_RCVCTL_START, base + NvRegReceiverControl);
+ rx_ctrl |= NVREG_RCVCTL_START;
+ if (np->mac_in_use)
+ rx_ctrl &= ~NVREG_RCVCTL_RX_PATH_EN;
+ writel(rx_ctrl, base + NvRegReceiverControl);
dprintk(KERN_DEBUG "%s: nv_start_rx to duplex %d, speed 0x%08x.\n",
dev->name, np->duplex, np->linkspeed);
pci_push(base);
static void nv_stop_rx(struct net_device *dev)
{
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 rx_ctrl = readl(base + NvRegReceiverControl);
dprintk(KERN_DEBUG "%s: nv_stop_rx\n", dev->name);
- writel(0, base + NvRegReceiverControl);
+ if (!np->mac_in_use)
+ rx_ctrl &= ~NVREG_RCVCTL_START;
+ else
+ rx_ctrl |= NVREG_RCVCTL_RX_PATH_EN;
+ writel(rx_ctrl, base + NvRegReceiverControl);
reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
udelay(NV_RXSTOP_DELAY2);
- writel(0, base + NvRegLinkSpeed);
+ if (!np->mac_in_use)
+ writel(0, base + NvRegLinkSpeed);
}
static void nv_start_tx(struct net_device *dev)
{
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 tx_ctrl = readl(base + NvRegTransmitterControl);
dprintk(KERN_DEBUG "%s: nv_start_tx\n", dev->name);
- writel(NVREG_XMITCTL_START, base + NvRegTransmitterControl);
+ tx_ctrl |= NVREG_XMITCTL_START;
+ if (np->mac_in_use)
+ tx_ctrl &= ~NVREG_XMITCTL_TX_PATH_EN;
+ writel(tx_ctrl, base + NvRegTransmitterControl);
pci_push(base);
}
static void nv_stop_tx(struct net_device *dev)
{
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ u32 tx_ctrl = readl(base + NvRegTransmitterControl);
dprintk(KERN_DEBUG "%s: nv_stop_tx\n", dev->name);
- writel(0, base + NvRegTransmitterControl);
+ if (!np->mac_in_use)
+ tx_ctrl &= ~NVREG_XMITCTL_START;
+ else
+ tx_ctrl |= NVREG_XMITCTL_TX_PATH_EN;
+ writel(tx_ctrl, base + NvRegTransmitterControl);
reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
udelay(NV_TXSTOP_DELAY2);
- writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+ if (!np->mac_in_use)
+ writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV,
+ base + NvRegTransmitPoll);
}
static void nv_txrx_reset(struct net_device *dev)
int pkts, limit = min(*budget, dev->quota);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
+ unsigned long flags;
pkts = nv_rx_process(dev, limit);
if (nv_alloc_rx(dev)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (!np->in_shutdown)
mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
}
if (pkts < limit) {
netif_rx_complete(dev);
/* re-enable receive interrupts */
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
+
np->irqmask |= NVREG_IRQ_RX_ALL;
if (np->msi_flags & NV_MSI_X_ENABLED)
writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
else
writel(np->irqmask, base + NvRegIrqMask);
- spin_unlock_irq(&np->lock);
+
+ spin_unlock_irqrestore(&np->lock, flags);
return 0;
} else {
/* used up our quantum, so reschedule */
return 0;
}
-/* Indicate to mgmt unit whether driver is loaded or not */
-static void nv_mgmt_driver_loaded(struct net_device *dev, int loaded)
-{
- u8 __iomem *base = get_hwbase(dev);
- u32 tx_ctrl;
-
- tx_ctrl = readl(base + NvRegTransmitterControl);
- if (loaded)
- tx_ctrl |= NVREG_XMITCTL_HOST_LOADED;
- else
- tx_ctrl &= ~NVREG_XMITCTL_HOST_LOADED;
- writel(tx_ctrl, base + NvRegTransmitterControl);
-}
-
static int nv_open(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
if (id->driver_data & DEV_HAS_MGMT_UNIT) {
- writel(0x1, base + 0x204); pci_push(base);
- msleep(500);
/* management unit running on the mac? */
- np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST;
- if (np->mac_in_use) {
- u32 mgmt_sync;
- /* management unit setup the phy already? */
- mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK;
- if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY) {
- if (!nv_mgmt_acquire_sema(dev)) {
- for (i = 0; i < 5000; i++) {
- msleep(1);
- mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK;
- if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY)
- continue;
- if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT)
- phyinitialized = 1;
- break;
+ if (readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_PHY_INIT) {
+ np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST;
+ dprintk(KERN_INFO "%s: mgmt unit is running. mac in use %x.\n", pci_name(pci_dev), np->mac_in_use);
+ for (i = 0; i < 5000; i++) {
+ msleep(1);
+ if (nv_mgmt_acquire_sema(dev)) {
+ /* management unit setup the phy already? */
+ if ((readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
+ NVREG_XMITCTL_SYNC_PHY_INIT) {
+ /* phy is inited by mgmt unit */
+ phyinitialized = 1;
+ dprintk(KERN_INFO "%s: Phy already initialized by mgmt unit.\n", pci_name(pci_dev));
+ } else {
+ /* we need to init the phy */
}
- } else {
- /* we need to init the phy */
+ break;
}
- } else if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT) {
- /* phy is inited by SMU */
- phyinitialized = 1;
- } else {
- /* we need to init the phy */
}
}
}
if (!phyinitialized) {
/* reset it */
phy_init(dev);
- }
-
- if (id->driver_data & DEV_HAS_MGMT_UNIT) {
- nv_mgmt_driver_loaded(dev, 1);
+ } else {
+ /* see if it is a gigabit phy */
+ u32 mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
+ if (mii_status & PHY_GIGABIT) {
+ np->gigabit = PHY_GIGABIT;
+ }
}
/* set default link speed settings */
out_error:
if (phystate_orig)
writel(phystate|NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl);
- if (np->mac_in_use)
- nv_mgmt_driver_loaded(dev, 0);
pci_set_drvdata(pci_dev, NULL);
out_freering:
free_rings(dev);
writel(np->orig_mac[0], base + NvRegMacAddrA);
writel(np->orig_mac[1], base + NvRegMacAddrB);
- if (np->mac_in_use)
- nv_mgmt_driver_loaded(dev, 0);
-
/* free all structures */
free_rings(dev);
iounmap(get_hwbase(dev));
fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
if (fep->interrupt < 0)
return -EINVAL;
-
+
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- fep->fec.fecp =(void*)r->start;
+ fep->fec.fecp = ioremap(r->start, r->end - r->start + 1);
if(fep->fec.fecp == NULL)
return -EINVAL;
* Clear any outstanding interrupt.
*/
FW(fecp, ievent, 0xffc0);
+#ifndef CONFIG_PPC_MERGE
FW(fecp, ivec, (fep->interrupt / 2) << 29);
-
+#else
+ FW(fecp, ivec, (virq_to_hw(fep->interrupt) / 2) << 29);
+#endif
/*
- * adjust to speed (only for DUET & RMII)
+ * adjust to speed (only for DUET & RMII)
*/
#ifdef CONFIG_DUET
if (fpi->use_rmii) {
static void pre_request_irq(struct net_device *dev, int irq)
{
+#ifndef CONFIG_PPC_MERGE
immap_t *immap = fs_enet_immap;
u32 siel;
siel &= ~(0x80000000 >> (irq & ~1));
out_be32(&immap->im_siu_conf.sc_siel, siel);
}
+#endif
}
static void post_free_irq(struct net_device *dev, int irq)
return -EINVAL;
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- fep->scc.sccp = (void *)r->start;
+ fep->scc.sccp = ioremap(r->start, r->end - r->start + 1);
if (fep->scc.sccp == NULL)
return -EINVAL;
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
- fep->scc.ep = (void *)r->start;
+ fep->scc.ep = ioremap(r->start, r->end - r->start + 1);
if (fep->scc.ep == NULL)
return -EINVAL;
static void pre_request_irq(struct net_device *dev, int irq)
{
+#ifndef CONFIG_PPC_MERGE
immap_t *immap = fs_enet_immap;
u32 siel;
siel &= ~(0x80000000 >> (irq & ~1));
out_be32(&immap->im_siu_conf.sc_siel, siel);
}
+#endif
}
static void post_free_irq(struct net_device *dev, int irq)
{
struct mii_phy_def *def;
int i;
- u32 id;
+ int id;
phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
/* Read ID and find matching entry */
id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
+ if (id < 0)
+ return -ENODEV;
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
int ret = 0;
u32 from = G_TC_FROM(skb->tc_verd);
- stats->tx_packets++;
- stats->tx_bytes+=skb->len;
+ stats->rx_packets++;
+ stats->rx_bytes+=skb->len;
if (!from || !skb->input_dev) {
dropped:
for (i = 0; i < numifbs && !err; i++)
err = ifb_init_one(i);
if (err) {
- i--;
- while (--i >= 0)
+ while (i--)
ifb_free_one(i);
}
goto drop;
}
- /* Make sure there is room for IrDA-USB header. The actual
- * allocation will be done lower in skb_push().
- * Also, we don't use directly skb_cow(), because it require
- * headroom >= 16, which force unnecessary copies - Jean II */
- if (skb_headroom(skb) < self->header_length) {
- IRDA_DEBUG(0, "%s(), Insuficient skb headroom.\n", __FUNCTION__);
- if (skb_cow(skb, self->header_length)) {
- IRDA_WARNING("%s(), failed skb_cow() !!!\n", __FUNCTION__);
- goto drop;
- }
- }
+ memcpy(self->tx_buff + self->header_length, skb->data, skb->len);
/* Change setting for next frame */
-
if (self->capability & IUC_STIR421X) {
__u8 turnaround_time;
- __u8* frame;
+ __u8* frame = self->tx_buff;
turnaround_time = get_turnaround_time( skb );
- frame= skb_push(skb, self->header_length);
irda_usb_build_header(self, frame, 0);
frame[2] = turnaround_time;
if ((skb->len != 0) &&
frame[1] = 0;
}
} else {
- irda_usb_build_header(self, skb_push(skb, self->header_length), 0);
+ irda_usb_build_header(self, self->tx_buff, 0);
}
/* FIXME: Make macro out of this one */
((struct irda_skb_cb *)skb->cb)->context = self;
- usb_fill_bulk_urb(urb, self->usbdev,
+ usb_fill_bulk_urb(urb, self->usbdev,
usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
- skb->data, IRDA_SKB_MAX_MTU,
+ self->tx_buff, skb->len + self->header_length,
write_bulk_callback, skb);
- urb->transfer_buffer_length = skb->len;
+
/* This flag (URB_ZERO_PACKET) indicates that what we send is not
* a continuous stream of data but separate packets.
* In this case, the USB layer will insert an empty USB frame (TD)
/* Remove the speed buffer */
kfree(self->speed_buff);
self->speed_buff = NULL;
+
+ kfree(self->tx_buff);
+ self->tx_buff = NULL;
}
/********************** USB CONFIG SUBROUTINES **********************/
IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
__FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
- /* Should be 8, 16, 32 or 64 bytes */
- IRDA_ASSERT(self->bulk_out_mtu == 64, ;);
return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
}
memset(self->speed_buff, 0, IRDA_USB_SPEED_MTU);
+ self->tx_buff = kzalloc(IRDA_SKB_MAX_MTU + self->header_length,
+ GFP_KERNEL);
+ if (self->tx_buff == NULL)
+ goto err_out_4;
+
ret = irda_usb_open(self);
if (ret)
- goto err_out_4;
+ goto err_out_5;
IRDA_MESSAGE("IrDA: Registered device %s\n", net->name);
usb_set_intfdata(intf, self);
self->needspatch = (ret < 0);
if (self->needspatch) {
IRDA_ERROR("STIR421X: Couldn't upload patch\n");
- goto err_out_5;
+ goto err_out_6;
}
/* replace IrDA class descriptor with what patched device is now reporting */
irda_desc = irda_usb_find_class_desc (self->usbintf);
if (irda_desc == NULL) {
ret = -ENODEV;
- goto err_out_5;
+ goto err_out_6;
}
if (self->irda_desc)
kfree (self->irda_desc);
}
return 0;
-
-err_out_5:
+err_out_6:
unregister_netdev(self->netdev);
+err_out_5:
+ kfree(self->tx_buff);
err_out_4:
kfree(self->speed_buff);
err_out_3:
struct irlap_cb *irlap; /* The link layer we are binded to */
struct qos_info qos;
char *speed_buff; /* Buffer for speed changes */
+ char *tx_buff;
struct timeval stamp;
struct timeval now;
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200");
MODULE_LICENSE("GPL");
unsigned i;
seq_printf(seq, "\n%s (vid/did: %04x/%04x)\n",
- PCIDEV_NAME(pdev), (int)pdev->vendor, (int)pdev->device);
+ pci_name(pdev), (int)pdev->vendor, (int)pdev->device);
seq_printf(seq, "pci-power-state: %u\n", (unsigned) pdev->current_state);
seq_printf(seq, "resources: irq=%u / io=0x%04x / dma_mask=0x%016Lx\n",
pdev->irq, (unsigned)pci_resource_start(pdev, 0), (unsigned long long)pdev->dma_mask);
if (vlsi_start_hw(idev))
IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
- __FUNCTION__, PCIDEV_NAME(idev->pdev), ndev->name);
+ __FUNCTION__, pci_name(idev->pdev), ndev->name);
else
netif_start_queue(ndev);
}
pdev->current_state = 0; /* hw must be running now */
IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n",
- drivername, PCIDEV_NAME(pdev));
+ drivername, pci_name(pdev));
if ( !pci_resource_start(pdev,0)
|| !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
pci_set_drvdata(pdev, NULL);
- IRDA_MESSAGE("%s: %s removed\n", drivername, PCIDEV_NAME(pdev));
+ IRDA_MESSAGE("%s: %s removed\n", drivername, pci_name(pdev));
}
#ifdef CONFIG_PM
if (!ndev) {
IRDA_ERROR("%s - %s: no netdevice \n",
- __FUNCTION__, PCIDEV_NAME(pdev));
+ __FUNCTION__, pci_name(pdev));
return 0;
}
idev = ndev->priv;
pdev->current_state = state.event;
}
else
- IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event);
+ IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
up(&idev->sem);
return 0;
}
if (!ndev) {
IRDA_ERROR("%s - %s: no netdevice \n",
- __FUNCTION__, PCIDEV_NAME(pdev));
+ __FUNCTION__, pci_name(pdev));
return 0;
}
idev = ndev->priv;
if (pdev->current_state == 0) {
up(&idev->sem);
IRDA_WARNING("%s - %s: already resumed\n",
- __FUNCTION__, PCIDEV_NAME(pdev));
+ __FUNCTION__, pci_name(pdev));
return 0;
}
#define PCI_CLASS_SUBCLASS_MASK 0xffff
#endif
-/* in recent 2.5 interrupt handlers have non-void return value */
-#ifndef IRQ_RETVAL
-typedef void irqreturn_t;
-#define IRQ_NONE
-#define IRQ_HANDLED
-#define IRQ_RETVAL(x)
-#endif
-
-/* some stuff need to check kernelversion. Not all 2.5 stuff was present
- * in early 2.5.x - the test is merely to separate 2.4 from 2.5
- */
-#include <linux/version.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
-/* PDE() introduced in 2.5.4 */
-#ifdef CONFIG_PROC_FS
-#define PDE(inode) ((inode)->i_private)
-#endif
-
-/* irda crc16 calculation exported in 2.5.42 */
-#define irda_calc_crc16(fcs,buf,len) (GOOD_FCS)
-
-/* we use this for unified pci device name access */
-#define PCIDEV_NAME(pdev) ((pdev)->name)
-
-#else /* 2.5 or later */
-
-/* whatever we get from the associated struct device - bus:slot:dev.fn id */
-#define PCIDEV_NAME(pdev) (pci_name(pdev))
-
-#endif
-
/* ================================================================ */
/* non-standard PCI registers */
#include <asm/abs_addr.h>
#include <asm/iseries/mf.h>
#include <asm/uaccess.h>
-
+#include <asm/firmware.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
* Module initialization/cleanup
*/
-void __exit veth_module_cleanup(void)
+static void __exit veth_module_cleanup(void)
{
int i;
struct veth_lpar_connection *cnx;
}
module_exit(veth_module_cleanup);
-int __init veth_module_init(void)
+static int __init veth_module_init(void)
{
int i;
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
this_lp = HvLpConfig_getLpIndex_outline();
for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) {
/* TX */
struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
+ unsigned int restart_queue;
unsigned long timeo_start;
uint32_t tx_cmd_type;
uint64_t hw_csum_tx_good;
{"tx_window_errors", IXGB_STAT(net_stats.tx_window_errors)},
{"tx_deferred_ok", IXGB_STAT(stats.dc)},
{"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
+ {"tx_restart_queue", IXGB_STAT(restart_queue) },
{"rx_long_length_errors", IXGB_STAT(stats.roc)},
{"rx_short_length_errors", IXGB_STAT(stats.ruc)},
#ifdef NETIF_F_TSO
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
for(i = 1; i < IXGB_RAR_ENTRIES; i++) {
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ /* Write high reg first to disable the AV bit first */
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
}
return;
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "1.0.117-k2"DRIVERNAPI
+#define DRV_VERSION "1.0.126-k2"DRIVERNAPI
char ixgb_driver_version[] = DRV_VERSION;
static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
struct ixgb_buffer *buffer_info;
int len = skb->len;
unsigned int offset = 0, size, count = 0, i;
+ unsigned int mss = skb_shinfo(skb)->gso_size;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
unsigned int f;
while(len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, IXGB_MAX_DATA_PER_TXD);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+
buffer_info->length = size;
WARN_ON(buffer_info->dma != 0);
buffer_info->dma =
while(len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, IXGB_MAX_DATA_PER_TXD);
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len
+ && size > 8))
+ size -= 4;
+
buffer_info->length = size;
buffer_info->dma =
pci_map_page(adapter->pdev,
IXGB_WRITE_REG(&adapter->hw, TDT, i);
}
+static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(IXGB_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int ixgb_maybe_stop_tx(struct net_device *netdev,
+ struct ixgb_desc_ring *tx_ring, int size)
+{
+ if (likely(IXGB_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __ixgb_maybe_stop_tx(netdev, size);
+}
+
+
/* Tx Descriptors needed, worst case */
#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \
(((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
-#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) + \
- MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1
+#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \
+ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
+ + 1 /* one more needed for sentinel TSO workaround */
static int
ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
spin_lock_irqsave(&adapter->tx_lock, flags);
#endif
- if(unlikely(IXGB_DESC_UNUSED(&adapter->tx_ring) < DESC_NEEDED)) {
+ if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
+ DESC_NEEDED))) {
netif_stop_queue(netdev);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return NETDEV_TX_BUSY;
#ifdef NETIF_F_LLTX
/* Make sure there is space in the ring for the next send. */
- if(unlikely(IXGB_DESC_UNUSED(&adapter->tx_ring) < DESC_NEEDED))
- netif_stop_queue(netdev);
+ ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
};
/* Setup and register the loopback device. */
-int __init loopback_init(void)
+static int __init loopback_init(void)
{
return register_netdev(&loopback_dev);
};
+module_init(loopback_init);
+
EXPORT_SYMBOL(loopback_dev);
while (mp->tx_desc_count > 0) {
spin_lock_irqsave(&mp->lock, flags);
+
+ /* tx_desc_count might have changed before acquiring the lock */
+ if (mp->tx_desc_count <= 0) {
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return released;
+ }
+
tx_index = mp->tx_used_desc_q;
desc = &mp->p_tx_desc_area[tx_index];
cmd_sts = desc->cmd_sts;
if (skb)
mp->tx_skb[tx_index] = NULL;
- spin_unlock_irqrestore(&mp->lock, flags);
-
if (cmd_sts & ETH_ERROR_SUMMARY) {
printk("%s: Error in TX\n", dev->name);
mp->stats.tx_errors++;
}
+ spin_unlock_irqrestore(&mp->lock, flags);
+
if (cmd_sts & ETH_TX_FIRST_DESC)
dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
else
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.1.0"
+#define MYRI10GE_VERSION_STR "1.2.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
unsigned long serial_number;
int vendor_specific_offset;
int fw_multicast_support;
- u32 devctl;
- u16 msi_flags;
u32 read_dma;
u32 write_dma;
u32 read_write_dma;
MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets\n");
static int myri10ge_msi = 1; /* enable msi by default */
-module_param(myri10ge_msi, int, S_IRUGO);
+module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts\n");
static int myri10ge_intr_coal_delay = 25;
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
+static int myri10ge_wcfifo = 1;
+module_param(myri10ge_wcfifo, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
mgp->irq_claim = (__iomem __be32 *) (mgp->sram + cmd.data0);
- if (!mgp->msi_enabled) {
- status |= myri10ge_send_cmd
- (mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, &cmd, 0);
- mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
+ &cmd, 0);
+ mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
- }
status |= myri10ge_send_cmd
(mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
mgp->tx.req_list = NULL;
}
+static int myri10ge_request_irq(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ int status;
+
+ if (myri10ge_msi) {
+ status = pci_enable_msi(pdev);
+ if (status != 0)
+ dev_err(&pdev->dev,
+ "Error %d setting up MSI; falling back to xPIC\n",
+ status);
+ else
+ mgp->msi_enabled = 1;
+ } else {
+ mgp->msi_enabled = 0;
+ }
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
+ mgp->dev->name, mgp);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to allocate IRQ\n");
+ if (mgp->msi_enabled)
+ pci_disable_msi(pdev);
+ }
+ return status;
+}
+
+static void myri10ge_free_irq(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+
+ free_irq(pdev->irq, mgp);
+ if (mgp->msi_enabled)
+ pci_disable_msi(pdev);
+}
+
static int myri10ge_open(struct net_device *dev)
{
struct myri10ge_priv *mgp;
status = myri10ge_reset(mgp);
if (status != 0) {
printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
- mgp->running = MYRI10GE_ETH_STOPPED;
- return -ENXIO;
+ goto abort_with_nothing;
}
+ status = myri10ge_request_irq(mgp);
+ if (status != 0)
+ goto abort_with_nothing;
+
/* decide what small buffer size to use. For good TCP rx
* performance, it is important to not receive 1514 byte
* frames into jumbo buffers, as it confuses the socket buffer
"myri10ge: %s: failed to get ring sizes or locations\n",
dev->name);
mgp->running = MYRI10GE_ETH_STOPPED;
- return -ENXIO;
+ goto abort_with_irq;
}
- if (mgp->mtrr >= 0) {
+ if (myri10ge_wcfifo && mgp->mtrr >= 0) {
mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
mgp->rx_small.wc_fifo =
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
status = myri10ge_allocate_rings(dev);
if (status != 0)
- goto abort_with_nothing;
+ goto abort_with_irq;
/* now give firmware buffers sizes, and MTU */
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
abort_with_rings:
myri10ge_free_rings(dev);
+abort_with_irq:
+ myri10ge_free_irq(mgp);
+
abort_with_nothing:
mgp->running = MYRI10GE_ETH_STOPPED;
return -ENOMEM;
printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
netif_tx_disable(dev);
-
+ myri10ge_free_irq(mgp);
myri10ge_free_rings(dev);
mgp->running = MYRI10GE_ETH_STOPPED;
}
}
-static void myri10ge_save_state(struct myri10ge_priv *mgp)
-{
- struct pci_dev *pdev = mgp->pdev;
- int cap;
-
- pci_save_state(pdev);
- /* now save PCIe and MSI state that Linux will not
- * save for us */
- cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL, &mgp->devctl);
- cap = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- pci_read_config_word(pdev, cap + PCI_MSI_FLAGS, &mgp->msi_flags);
-}
-
-static void myri10ge_restore_state(struct myri10ge_priv *mgp)
-{
- struct pci_dev *pdev = mgp->pdev;
- int cap;
-
- /* restore PCIe and MSI state that linux will not */
- cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- pci_write_config_dword(pdev, cap + PCI_CAP_ID_EXP, mgp->devctl);
- cap = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- pci_write_config_word(pdev, cap + PCI_MSI_FLAGS, mgp->msi_flags);
-
- pci_restore_state(pdev);
-}
-
#ifdef CONFIG_PM
static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
rtnl_unlock();
}
myri10ge_dummy_rdma(mgp, 0);
- free_irq(pdev->irq, mgp);
- myri10ge_save_state(mgp);
+ pci_save_state(pdev);
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- return 0;
+
+ return pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
static int myri10ge_resume(struct pci_dev *pdev)
mgp->dev->name);
return -EIO;
}
- myri10ge_restore_state(mgp);
+
+ status = pci_restore_state(pdev);
+ if (status)
+ return status;
status = pci_enable_device(pdev);
- if (status < 0) {
+ if (status) {
dev_err(&pdev->dev, "failed to enable device\n");
- return -EIO;
+ return status;
}
pci_set_master(pdev);
- status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
- netdev->name, mgp);
- if (status != 0) {
- dev_err(&pdev->dev, "failed to allocate IRQ\n");
- goto abort_with_enabled;
- }
-
myri10ge_reset(mgp);
myri10ge_dummy_rdma(mgp, 1);
/* Save configuration space to be restored if the
* nic resets due to a parity error */
- myri10ge_save_state(mgp);
+ pci_save_state(pdev);
if (netif_running(netdev)) {
rtnl_lock();
- myri10ge_open(netdev);
+ status = myri10ge_open(netdev);
rtnl_unlock();
+ if (status != 0)
+ goto abort_with_enabled;
+
}
netif_device_attach(netdev);
* when the driver was loaded, or the last time the
* nic was resumed from power saving mode.
*/
- myri10ge_restore_state(mgp);
+ pci_restore_state(mgp->pdev);
+
+ /* save state again for accounting reasons */
+ pci_save_state(mgp->pdev);
+
} else {
/* if we get back -1's from our slot, perhaps somebody
* powered off our card. Don't try to reset it in
goto abort_with_firmware;
}
- if (myri10ge_msi) {
- status = pci_enable_msi(pdev);
- if (status != 0)
- dev_err(&pdev->dev,
- "Error %d setting up MSI; falling back to xPIC\n",
- status);
- else
- mgp->msi_enabled = 1;
- }
-
- status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
- netdev->name, mgp);
- if (status != 0) {
- dev_err(&pdev->dev, "failed to allocate IRQ\n");
- goto abort_with_firmware;
- }
-
pci_set_drvdata(pdev, mgp);
if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
netdev->hard_start_xmit = myri10ge_xmit;
netdev->get_stats = myri10ge_get_stats;
netdev->base_addr = mgp->iomem_base;
- netdev->irq = pdev->irq;
netdev->change_mtu = myri10ge_change_mtu;
netdev->set_multicast_list = myri10ge_set_multicast_list;
netdev->set_mac_address = myri10ge_set_mac_address;
netdev->poll = myri10ge_poll;
netdev->weight = myri10ge_napi_weight;
+ /* make sure we can get an irq, and that MSI can be
+ * setup (if available). Also ensure netdev->irq
+ * is set to correct value if MSI is enabled */
+ status = myri10ge_request_irq(mgp);
+ if (status != 0)
+ goto abort_with_firmware;
+ netdev->irq = pdev->irq;
+ myri10ge_free_irq(mgp);
+
/* Save configuration space to be restored if the
* nic resets due to a parity error */
- myri10ge_save_state(mgp);
+ pci_save_state(pdev);
/* Setup the watchdog timer */
setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
status = register_netdev(netdev);
if (status != 0) {
dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
- goto abort_with_irq;
+ goto abort_with_state;
}
dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
(mgp->msi_enabled ? "MSI" : "xPIC"),
- pdev->irq, mgp->tx.boundary, mgp->fw_name,
+ netdev->irq, mgp->tx.boundary, mgp->fw_name,
(mgp->mtrr >= 0 ? "Enabled" : "Disabled"));
return 0;
-abort_with_irq:
- free_irq(pdev->irq, mgp);
- if (mgp->msi_enabled)
- pci_disable_msi(pdev);
+abort_with_state:
+ pci_restore_state(pdev);
abort_with_firmware:
myri10ge_dummy_rdma(mgp, 0);
flush_scheduled_work();
netdev = mgp->dev;
unregister_netdev(netdev);
- free_irq(pdev->irq, mgp);
- if (mgp->msi_enabled)
- pci_disable_msi(pdev);
myri10ge_dummy_rdma(mgp, 0);
+ /* avoid a memory leak */
+ pci_restore_state(pdev);
+
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
dma_free_coherent(&pdev->dev, bytes,
mgp->rx_done.entry, mgp->rx_done.bus);
#include "netxen_nic_hw.h"
-#define NETXEN_NIC_BUILD_NO "1"
+#define NETXEN_NIC_BUILD_NO "2"
#define _NETXEN_NIC_LINUX_MAJOR 3
#define _NETXEN_NIC_LINUX_MINOR 3
-#define _NETXEN_NIC_LINUX_SUBVERSION 2
-#define NETXEN_NIC_LINUX_VERSIONID "3.3.2" "-" NETXEN_NIC_BUILD_NO
-#define NETXEN_NIC_FW_VERSIONID "3.3.2"
+#define _NETXEN_NIC_LINUX_SUBVERSION 3
+#define NETXEN_NIC_LINUX_VERSIONID "3.3.3" "-" NETXEN_NIC_BUILD_NO
#define RCV_DESC_RINGSIZE \
(sizeof(struct rcv_desc) * adapter->max_rx_desc_count)
#define THIRD_PAGE_GROUP_SIZE THIRD_PAGE_GROUP_END - THIRD_PAGE_GROUP_START
#define MAX_RX_BUFFER_LENGTH 1760
-#define MAX_RX_JUMBO_BUFFER_LENGTH 9046
+#define MAX_RX_JUMBO_BUFFER_LENGTH 8062
#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512)
#define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2)
#define RX_JUMBO_DMA_MAP_LEN \
(RCV_DESC_NORMAL)))
#define MAX_CMD_DESCRIPTORS 1024
-#define MAX_RCV_DESCRIPTORS 32768
-#define MAX_JUMBO_RCV_DESCRIPTORS 4096
-#define MAX_LRO_RCV_DESCRIPTORS 2048
+#define MAX_RCV_DESCRIPTORS 16384
+#define MAX_JUMBO_RCV_DESCRIPTORS 1024
+#define MAX_LRO_RCV_DESCRIPTORS 64
#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS
#define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS
#define MAX_RCV_DESC MAX_RCV_DESCRIPTORS
spinlock_t tx_lock;
spinlock_t lock;
struct work_struct watchdog_task;
- struct work_struct tx_timeout_task;
- struct net_device *netdev;
struct timer_list watchdog_timer;
u32 curr_window;
struct netxen_recv_context recv_ctx[MAX_RCV_CTX];
int is_up;
- int number;
struct netxen_dummy_dma dummy_dma;
/* Context interface shared between card and host */
struct pci_dev *pdev;
struct net_device_stats net_stats;
struct netxen_port_stats stats;
+ struct work_struct tx_timeout_task;
};
#define PCI_OFFSET_FIRST_RANGE(adapter, off) \
int len);
int netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
int len);
-int netxen_nic_hw_read_ioctl(struct netxen_adapter *adapter, u64 off,
- void *data, int len);
-int netxen_nic_hw_write_ioctl(struct netxen_adapter *adapter, u64 off,
- void *data, int len);
-int netxen_nic_pci_mem_write_ioctl(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
-int netxen_nic_pci_mem_read_ioctl(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
void netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
unsigned long off, int data);
struct cmd_desc_type0 *desc, struct sk_buff *skb);
int netxen_nic_hw_resources(struct netxen_adapter *adapter);
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
-int
-netxen_nic_do_ioctl(struct netxen_adapter *adapter, void *u_data,
- struct netxen_port *port);
int netxen_nic_rx_has_work(struct netxen_adapter *adapter);
int netxen_nic_tx_has_work(struct netxen_adapter *adapter);
void netxen_watchdog_task(struct work_struct *work);
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
#include "netxen_nic_phan_reg.h"
-#include "netxen_nic_ioctl.h"
struct netxen_nic_stats {
char stat_string[ETH_GSTRING_LEN];
{"tx_bytes", NETXEN_NIC_STAT(stats.txbytes)},
};
-#define NETXEN_NIC_STATS_LEN \
- sizeof(netxen_nic_gstrings_stats) / sizeof(struct netxen_nic_stats)
+#define NETXEN_NIC_STATS_LEN ARRAY_SIZE(netxen_nic_gstrings_stats)
static const char netxen_nic_gstrings_test[][ETH_GSTRING_LEN] = {
"Register_Test_offline", "EEPROM_Test_offline",
(netxen_nic_gstrings_stats[index].sizeof_stat ==
sizeof(u64)) ? *(u64 *) p : *(u32 *) p;
}
-
}
struct ethtool_ops netxen_nic_ethtool_ops = {
((skb->nh.iph)->ihl * sizeof(u32)) +
((skb->h.th)->doff * sizeof(u32));
netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
- } else if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (skb->nh.iph->protocol == IPPROTO_TCP) {
netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
} else if (skb->nh.iph->protocol == IPPROTO_UDP) {
_NETXEN_NIC_LINUX_MAJOR, fw_major);
adapter->driver_mismatch = 1;
}
- if (fw_minor != _NETXEN_NIC_LINUX_MINOR) {
+ if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
+ fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
printk(KERN_ERR "The mismatch in driver version and firmware "
"version minor number\n"
"Driver version minor number = %d \t"
fw_major, fw_minor);
}
-int netxen_crb_read_val(struct netxen_adapter *adapter, unsigned long off)
-{
- int data;
- netxen_nic_hw_read_wx(adapter, off, &data, 4);
- return data;
-}
-
-int netxen_nic_hw_write_ioctl(struct netxen_adapter *adapter, u64 off,
- void *data, int len)
-{
- void *addr;
- u64 offset = off;
- u8 *mem_ptr = NULL;
- unsigned long mem_base;
- unsigned long mem_page;
-
- if (ADDR_IN_WINDOW1(off)) {
- addr = NETXEN_CRB_NORMALIZE(adapter, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- offset = NETXEN_CRB_NORMAL(off);
- mem_page = offset & PAGE_MASK;
- if (mem_page != ((offset + len - 1) & PAGE_MASK))
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL) {
- return 1;
- }
- addr = mem_ptr;
- addr += offset & (PAGE_SIZE - 1);
- }
- } else {
- addr = pci_base_offset(adapter, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- mem_page = off & PAGE_MASK;
- if (mem_page != ((off + len - 1) & PAGE_MASK))
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL) {
- return 1;
- }
- addr = mem_ptr;
- addr += off & (PAGE_SIZE - 1);
- }
- netxen_nic_pci_change_crbwindow(adapter, 0);
- }
- switch (len) {
- case 1:
- writeb(*(u8 *) data, addr);
- break;
- case 2:
- writew(*(u16 *) data, addr);
- break;
- case 4:
- writel(*(u32 *) data, addr);
- break;
- case 8:
- writeq(*(u64 *) data, addr);
- break;
- default:
- DPRINTK(INFO,
- "writing data %lx to offset %llx, num words=%d\n",
- *(unsigned long *)data, off, (len >> 3));
-
- netxen_nic_hw_block_write64((u64 __iomem *) data, addr,
- (len >> 3));
- break;
- }
-
- if (!ADDR_IN_WINDOW1(off))
- netxen_nic_pci_change_crbwindow(adapter, 1);
- if (mem_ptr)
- iounmap(mem_ptr);
- return 0;
-}
-
-int netxen_nic_hw_read_ioctl(struct netxen_adapter *adapter, u64 off,
- void *data, int len)
-{
- void *addr;
- u64 offset;
- u8 *mem_ptr = NULL;
- unsigned long mem_base;
- unsigned long mem_page;
-
- if (ADDR_IN_WINDOW1(off)) {
- addr = NETXEN_CRB_NORMALIZE(adapter, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- offset = NETXEN_CRB_NORMAL(off);
- mem_page = offset & PAGE_MASK;
- if (mem_page != ((offset + len - 1) & PAGE_MASK))
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL) {
- *(u8 *) data = 0;
- return 1;
- }
- addr = mem_ptr;
- addr += offset & (PAGE_SIZE - 1);
- }
- } else {
- addr = pci_base_offset(adapter, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- mem_page = off & PAGE_MASK;
- if (mem_page != ((off + len - 1) & PAGE_MASK))
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr =
- ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL)
- return 1;
- addr = mem_ptr;
- addr += off & (PAGE_SIZE - 1);
- }
- netxen_nic_pci_change_crbwindow(adapter, 0);
- }
- switch (len) {
- case 1:
- *(u8 *) data = readb(addr);
- break;
- case 2:
- *(u16 *) data = readw(addr);
- break;
- case 4:
- *(u32 *) data = readl(addr);
- break;
- case 8:
- *(u64 *) data = readq(addr);
- break;
- default:
- netxen_nic_hw_block_read64((u64 __iomem *) data, addr,
- (len >> 3));
- break;
- }
- if (!ADDR_IN_WINDOW1(off))
- netxen_nic_pci_change_crbwindow(adapter, 1);
- if (mem_ptr)
- iounmap(mem_ptr);
- return 0;
-}
-
-int netxen_nic_pci_mem_write_ioctl(struct netxen_adapter *adapter, u64 off,
- void *data, int size)
-{
- void *addr;
- int ret = 0;
- u8 *mem_ptr = NULL;
- unsigned long mem_base;
- unsigned long mem_page;
-
- if (data == NULL || off > (128 * 1024 * 1024)) {
- printk(KERN_ERR "%s: data: %p off:%llx\n",
- netxen_nic_driver_name, data, off);
- return 1;
- }
- off = netxen_nic_pci_set_window(adapter, off);
- /* Corner case : Malicious user tried to break the driver by reading
- last few bytes in ranges and tries to read further addresses.
- */
- if (!pci_base(adapter, off + size - 1) && pci_base(adapter, off)) {
- printk(KERN_ERR "%s: Invalid access to memory address range"
- " 0x%llx - 0x%llx\n", netxen_nic_driver_name, off,
- off + size);
- return 1;
- }
- addr = pci_base_offset(adapter, off);
- DPRINTK(INFO, "writing data %llx to offset %llx\n",
- *(unsigned long long *)data, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- mem_page = off & PAGE_MASK;
- /* Map two pages whenever user tries to access addresses in two
- consecutive pages.
- */
- if (mem_page != ((off + size - 1) & PAGE_MASK))
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL) {
- return 1;
- }
- addr = mem_ptr;
- addr += off & (PAGE_SIZE - 1);
- }
- switch (size) {
- case 1:
- writeb(*(u8 *) data, addr);
- break;
- case 2:
- writew(*(u16 *) data, addr);
- break;
- case 4:
- writel(*(u32 *) data, addr);
- break;
- case 8:
- writeq(*(u64 *) data, addr);
- break;
- default:
- DPRINTK(INFO,
- "writing data %lx to offset %llx, num words=%d\n",
- *(unsigned long *)data, off, (size >> 3));
-
- netxen_nic_hw_block_write64((u64 __iomem *) data, addr,
- (size >> 3));
- break;
- }
-
- if (mem_ptr)
- iounmap(mem_ptr);
- DPRINTK(INFO, "wrote %llx\n", *(unsigned long long *)data);
-
- return ret;
-}
-
-int netxen_nic_pci_mem_read_ioctl(struct netxen_adapter *adapter,
- u64 off, void *data, int size)
-{
- void *addr;
- int ret = 0;
- u8 *mem_ptr = NULL;
- unsigned long mem_base;
- unsigned long mem_page;
-
- if (data == NULL || off > (128 * 1024 * 1024)) {
- printk(KERN_ERR "%s: data: %p off:%llx\n",
- netxen_nic_driver_name, data, off);
- return 1;
- }
- off = netxen_nic_pci_set_window(adapter, off);
- /* Corner case : Malicious user tried to break the driver by reading
- last few bytes in ranges and tries to read further addresses.
- */
- if (!pci_base(adapter, off + size - 1) && pci_base(adapter, off)) {
- printk(KERN_ERR "%s: Invalid access to memory address range"
- " 0x%llx - 0x%llx\n", netxen_nic_driver_name, off,
- off + size);
- return 1;
- }
- addr = pci_base_offset(adapter, off);
- if (!addr) {
- mem_base = pci_resource_start(adapter->ahw.pdev, 0);
- mem_page = off & PAGE_MASK;
- /* Map two pages whenever user tries to access addresses in two
- consecutive pages.
- */
- if (mem_page != ((off + size - 1) & PAGE_MASK))
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == 0UL) {
- *(u8 *) data = 0;
- return 1;
- }
- addr = mem_ptr;
- addr += off & (PAGE_SIZE - 1);
- }
- switch (size) {
- case 1:
- *(u8 *) data = readb(addr);
- break;
- case 2:
- *(u16 *) data = readw(addr);
- break;
- case 4:
- *(u32 *) data = readl(addr);
- break;
- case 8:
- *(u64 *) data = readq(addr);
- break;
- default:
- netxen_nic_hw_block_read64((u64 __iomem *) data, addr,
- (size >> 3));
- break;
- }
-
- if (mem_ptr)
- iounmap(mem_ptr);
- DPRINTK(INFO, "read %llx\n", *(unsigned long long *)data);
-
- return ret;
-}
#include <linux/delay.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
-#include "netxen_nic_ioctl.h"
#include "netxen_nic_phan_reg.h"
struct crb_addr_pair {
}
netxen_process_rcv(adapter, ctxid, desc);
netxen_clear_sts_owner(desc);
- netxen_set_sts_owner(desc, STATUS_OWNER_PHANTOM);
+ netxen_set_sts_owner(desc, cpu_to_le16(STATUS_OWNER_PHANTOM));
consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
count++;
}
&& netif_carrier_ok(port->netdev))
&& ((jiffies - port->netdev->trans_start) >
port->netdev->watchdog_timeo)) {
- SCHEDULE_WORK(&port->adapter->tx_timeout_task);
+ SCHEDULE_WORK(&port->tx_timeout_task);
}
last_consumer = get_next_index(last_consumer,
*/
dma = pci_map_single(pdev, skb->data, rcv_desc->dma_size,
PCI_DMA_FROMDEVICE);
- pdesc->addr_buffer = dma;
+ pdesc->addr_buffer = cpu_to_le64(dma);
buffer->skb = skb;
buffer->state = NETXEN_BUFFER_BUSY;
buffer->dma = dma;
/* make a rcv descriptor */
- pdesc->reference_handle = buffer->ref_handle;
- pdesc->buffer_length = rcv_desc->dma_size;
+ pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
+ pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size);
DPRINTK(INFO, "done writing descripter\n");
producer =
get_next_index(producer, rcv_desc->max_rx_desc_count);
PCI_DMA_FROMDEVICE);
/* make a rcv descriptor */
- pdesc->reference_handle = le16_to_cpu(buffer->ref_handle);
- pdesc->buffer_length = le16_to_cpu(rcv_desc->dma_size);
+ pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
+ pdesc->buffer_length = cpu_to_le16(rcv_desc->dma_size);
pdesc->addr_buffer = cpu_to_le64(buffer->dma);
DPRINTK(INFO, "done writing descripter\n");
producer =
return 0;
}
-int
-netxen_nic_fill_statistics(struct netxen_adapter *adapter,
- struct netxen_port *port,
- struct netxen_statistics *netxen_stats)
-{
- void __iomem *addr;
-
- if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
- netxen_nic_pci_change_crbwindow(adapter, 0);
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_BYTE_CNT,
- &(netxen_stats->tx_bytes));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_FRAME_CNT,
- &(netxen_stats->tx_packets));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_BYTE_CNT,
- &(netxen_stats->rx_bytes));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_FRAME_CNT,
- &(netxen_stats->rx_packets));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_AGGR_ERROR_CNT,
- &(netxen_stats->rx_errors));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_CRC_ERROR_CNT,
- &(netxen_stats->rx_crc_errors));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR,
- &(netxen_stats->
- rx_long_length_error));
- NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR,
- &(netxen_stats->
- rx_short_length_error));
-
- netxen_nic_pci_change_crbwindow(adapter, 1);
- } else {
- spin_lock_bh(&adapter->tx_lock);
- netxen_stats->tx_bytes = port->stats.txbytes;
- netxen_stats->tx_packets = port->stats.xmitedframes +
- port->stats.xmitfinished;
- netxen_stats->rx_bytes = port->stats.rxbytes;
- netxen_stats->rx_packets = port->stats.no_rcv;
- netxen_stats->rx_errors = port->stats.rcvdbadskb;
- netxen_stats->tx_errors = port->stats.nocmddescriptor;
- netxen_stats->rx_short_length_error = port->stats.uplcong;
- netxen_stats->rx_long_length_error = port->stats.uphcong;
- netxen_stats->rx_crc_errors = 0;
- netxen_stats->rx_mac_errors = 0;
- spin_unlock_bh(&adapter->tx_lock);
- }
- return 0;
-}
void netxen_nic_clear_stats(struct netxen_adapter *adapter)
{
}
}
-int
-netxen_nic_clear_statistics(struct netxen_adapter *adapter,
- struct netxen_port *port)
-{
- int data = 0;
-
- netxen_nic_pci_change_crbwindow(adapter, 0);
-
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_BYTE_CNT, &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_FRAME_CNT,
- &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_BYTE_CNT, &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_FRAME_CNT,
- &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_AGGR_ERROR_CNT,
- &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_CRC_ERROR_CNT,
- &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR,
- &data);
- netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR,
- &data);
-
- netxen_nic_pci_change_crbwindow(adapter, 1);
- netxen_nic_clear_stats(adapter);
- return 0;
-}
-
-int
-netxen_nic_do_ioctl(struct netxen_adapter *adapter, void *u_data,
- struct netxen_port *port)
-{
- struct netxen_nic_ioctl_data data;
- struct netxen_nic_ioctl_data *up_data;
- int retval = 0;
- struct netxen_statistics netxen_stats;
-
- up_data = (void *)u_data;
-
- DPRINTK(INFO, "doing ioctl for %p\n", adapter);
- if (copy_from_user(&data, (void __user *)up_data, sizeof(data))) {
- /* evil user tried to crash the kernel */
- DPRINTK(ERR, "bad copy from userland: %d\n", (int)sizeof(data));
- retval = -EFAULT;
- goto error_out;
- }
-
- /* Shouldn't access beyond legal limits of "char u[64];" member */
- if (!data.ptr && (data.size > sizeof(data.u))) {
- /* evil user tried to crash the kernel */
- DPRINTK(ERR, "bad size: %d\n", data.size);
- retval = -EFAULT;
- goto error_out;
- }
-
- switch (data.cmd) {
- case netxen_nic_cmd_pci_read:
- if ((retval = netxen_nic_hw_read_ioctl(adapter, data.off,
- &(data.u), data.size)))
- goto error_out;
- if (copy_to_user
- ((void __user *)&(up_data->u), &(data.u), data.size)) {
- DPRINTK(ERR, "bad copy to userland: %d\n",
- (int)sizeof(data));
- retval = -EFAULT;
- goto error_out;
- }
- data.rv = 0;
- break;
-
- case netxen_nic_cmd_pci_write:
- if ((retval = netxen_nic_hw_write_ioctl(adapter, data.off,
- &(data.u), data.size)))
- goto error_out;
- data.rv = 0;
- break;
-
- case netxen_nic_cmd_pci_mem_read:
- if (netxen_nic_pci_mem_read_ioctl(adapter, data.off, &(data.u),
- data.size)) {
- DPRINTK(ERR, "Failed to read the data.\n");
- retval = -EFAULT;
- goto error_out;
- }
- if (copy_to_user
- ((void __user *)&(up_data->u), &(data.u), data.size)) {
- DPRINTK(ERR, "bad copy to userland: %d\n",
- (int)sizeof(data));
- retval = -EFAULT;
- goto error_out;
- }
- data.rv = 0;
- break;
-
- case netxen_nic_cmd_pci_mem_write:
- if ((retval = netxen_nic_pci_mem_write_ioctl(adapter, data.off,
- &(data.u),
- data.size)))
- goto error_out;
- data.rv = 0;
- break;
-
- case netxen_nic_cmd_pci_config_read:
- switch (data.size) {
- case 1:
- data.rv = pci_read_config_byte(adapter->ahw.pdev,
- data.off,
- (char *)&(data.u));
- break;
- case 2:
- data.rv = pci_read_config_word(adapter->ahw.pdev,
- data.off,
- (short *)&(data.u));
- break;
- case 4:
- data.rv = pci_read_config_dword(adapter->ahw.pdev,
- data.off,
- (u32 *) & (data.u));
- break;
- }
- if (copy_to_user
- ((void __user *)&(up_data->u), &(data.u), data.size)) {
- DPRINTK(ERR, "bad copy to userland: %d\n",
- (int)sizeof(data));
- retval = -EFAULT;
- goto error_out;
- }
- break;
-
- case netxen_nic_cmd_pci_config_write:
- switch (data.size) {
- case 1:
- data.rv = pci_write_config_byte(adapter->ahw.pdev,
- data.off,
- *(char *)&(data.u));
- break;
- case 2:
- data.rv = pci_write_config_word(adapter->ahw.pdev,
- data.off,
- *(short *)&(data.u));
- break;
- case 4:
- data.rv = pci_write_config_dword(adapter->ahw.pdev,
- data.off,
- *(u32 *) & (data.u));
- break;
- }
- break;
-
- case netxen_nic_cmd_get_stats:
- data.rv =
- netxen_nic_fill_statistics(adapter, port, &netxen_stats);
- if (copy_to_user
- ((void __user *)(up_data->ptr), (void *)&netxen_stats,
- sizeof(struct netxen_statistics))) {
- DPRINTK(ERR, "bad copy to userland: %d\n",
- (int)sizeof(netxen_stats));
- retval = -EFAULT;
- goto error_out;
- }
- up_data->rv = data.rv;
- break;
-
- case netxen_nic_cmd_clear_stats:
- data.rv = netxen_nic_clear_statistics(adapter, port);
- up_data->rv = data.rv;
- break;
-
- case netxen_nic_cmd_get_version:
- if (copy_to_user
- ((void __user *)&(up_data->u), NETXEN_NIC_LINUX_VERSIONID,
- sizeof(NETXEN_NIC_LINUX_VERSIONID))) {
- DPRINTK(ERR, "bad copy to userland: %d\n",
- (int)sizeof(data));
- retval = -EFAULT;
- goto error_out;
- }
- break;
-
- default:
- DPRINTK(INFO, "bad command %d for %p\n", data.cmd, adapter);
- retval = -EOPNOTSUPP;
- goto error_out;
- }
- put_user(data.rv, (&(up_data->rv)));
- DPRINTK(INFO, "done ioctl for %p well.\n", adapter);
-
- error_out:
- return retval;
-}
+++ /dev/null
-/*
- * Copyright (C) 2003 - 2006 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- * info@netxen.com
- * NetXen,
- * 3965 Freedom Circle, Fourth floor,
- * Santa Clara, CA 95054
- */
-
-#ifndef __NETXEN_NIC_IOCTL_H__
-#define __NETXEN_NIC_IOCTL_H__
-
-#include <linux/sockios.h>
-
-#define NETXEN_CMD_START SIOCDEVPRIVATE
-#define NETXEN_NIC_CMD (NETXEN_CMD_START + 1)
-#define NETXEN_NIC_NAME (NETXEN_CMD_START + 2)
-#define NETXEN_NIC_NAME_LEN 16
-#define NETXEN_NIC_NAME_RSP "NETXEN-UNM"
-
-typedef enum {
- netxen_nic_cmd_none = 0,
- netxen_nic_cmd_pci_read,
- netxen_nic_cmd_pci_write,
- netxen_nic_cmd_pci_mem_read,
- netxen_nic_cmd_pci_mem_write,
- netxen_nic_cmd_pci_config_read,
- netxen_nic_cmd_pci_config_write,
- netxen_nic_cmd_get_stats,
- netxen_nic_cmd_clear_stats,
- netxen_nic_cmd_get_version
-} netxen_nic_ioctl_cmd_t;
-
-struct netxen_nic_ioctl_data {
- u32 cmd;
- u32 unused1;
- u64 off;
- u32 size;
- u32 rv;
- char u[64];
- void *ptr;
-};
-
-struct netxen_statistics {
- u64 rx_packets;
- u64 tx_packets;
- u64 rx_bytes;
- u64 rx_errors;
- u64 tx_bytes;
- u64 tx_errors;
- u64 rx_crc_errors;
- u64 rx_short_length_error;
- u64 rx_long_length_error;
- u64 rx_mac_errors;
-};
-
-#endif /* __NETXEN_NIC_IOCTL_H_ */
for (portno = 0; portno < NETXEN_NIU_MAX_GBE_PORTS; portno++) {
linkup = val & 1;
if (linkup != (qg_linksup & 1)) {
- printk(KERN_INFO "%s: PORT %d link %s\n",
+ printk(KERN_INFO "%s: %s PORT %d link %s\n",
+ adapter->port[portno]->netdev->name,
netxen_nic_driver_name, portno,
((linkup == 0) ? "down" : "up"));
netxen_indicate_link_status(adapter, portno, linkup);
#include "netxen_nic.h"
#define DEFINE_GLOBAL_RECV_CRB
#include "netxen_nic_phan_reg.h"
-#include "netxen_nic_ioctl.h"
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
static char netxen_nic_driver_string[] = "NetXen Network Driver version "
NETXEN_NIC_LINUX_VERSIONID;
-struct netxen_adapter *g_adapter = NULL;
-
#define NETXEN_NETDEV_WEIGHT 120
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
static void netxen_tx_timeout_task(struct work_struct *work);
static void netxen_watchdog(unsigned long);
static int netxen_handle_int(struct netxen_adapter *, struct net_device *);
-static int netxen_nic_ioctl(struct net_device *netdev,
- struct ifreq *ifr, int cmd);
static int netxen_nic_poll(struct net_device *dev, int *budget);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netxen_nic_poll_controller(struct net_device *netdev);
{PCI_DEVICE(0x4040, 0x0003)},
{PCI_DEVICE(0x4040, 0x0004)},
{PCI_DEVICE(0x4040, 0x0005)},
+ {PCI_DEVICE(0x4040, 0x0024)},
+ {PCI_DEVICE(0x4040, 0x0025)},
{0,}
};
struct netxen_cmd_buffer *cmd_buf_arr = NULL;
u64 mac_addr[FLASH_NUM_PORTS + 1];
int valid_mac = 0;
- static int netxen_cards_found = 0;
printk(KERN_INFO "%s \n", netxen_nic_driver_string);
/* In current scheme, we use only PCI function 0 */
goto err_out_dbunmap;
}
- if (netxen_cards_found == 0) {
- g_adapter = adapter;
- }
adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS;
adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS;
netdev->set_multicast_list = netxen_nic_set_multi;
netdev->set_mac_address = netxen_nic_set_mac;
netdev->change_mtu = netxen_nic_change_mtu;
- netdev->do_ioctl = netxen_nic_ioctl;
netdev->tx_timeout = netxen_tx_timeout;
netdev->watchdog_timeo = HZ;
netdev->dev_addr);
}
}
- adapter->netdev = netdev;
- INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
+ INIT_WORK(&port->tx_timeout_task, netxen_tx_timeout_task);
netif_carrier_off(netdev);
netif_stop_queue(netdev);
adapter->port[i] = port;
}
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
+ netxen_pinit_from_rom(adapter, 0);
+ udelay(500);
+ netxen_load_firmware(adapter);
+ netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
/*
* delay a while to ensure that the Pegs are up & running.
* Otherwise, we might see some flaky behaviour.
break;
}
- adapter->number = netxen_cards_found;
adapter->driver_mismatch = 0;
return 0;
netxen_nic_stop_all_ports(adapter);
/* leave the hw in the same state as reboot */
+ netxen_pinit_from_rom(adapter, 0);
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
netxen_load_firmware(adapter);
netxen_free_adapter_offload(adapter);
/* Take skb->data itself */
pbuf = &adapter->cmd_buf_arr[producer];
if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) {
- pbuf->mss = skb_shinfo(skb)->gso_size;
- hwdesc->mss = skb_shinfo(skb)->gso_size;
+ pbuf->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+ hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
} else {
pbuf->mss = 0;
hwdesc->mss = 0;
static void netxen_watchdog(unsigned long v)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)v;
- if (adapter != g_adapter) {
- printk("%s: ***BUG*** adapter[%p] != g_adapter[%p]\n",
- __FUNCTION__, adapter, g_adapter);
- return;
- }
SCHEDULE_WORK(&adapter->watchdog_task);
}
{
struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev);
- SCHEDULE_WORK(&port->adapter->tx_timeout_task);
+ SCHEDULE_WORK(&port->tx_timeout_task);
}
static void netxen_tx_timeout_task(struct work_struct *work)
{
- struct netxen_adapter *adapter =
- container_of(work, struct netxen_adapter, tx_timeout_task);
- struct net_device *netdev = adapter->netdev;
+ struct netxen_port *port =
+ container_of(work, struct netxen_port, tx_timeout_task);
+ struct net_device *netdev = port->netdev;
unsigned long flags;
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
netxen_nic_driver_name, netdev->name);
- spin_lock_irqsave(&adapter->lock, flags);
+ spin_lock_irqsave(&port->adapter->lock, flags);
netxen_nic_close(netdev);
netxen_nic_open(netdev);
- spin_unlock_irqrestore(&adapter->lock, flags);
+ spin_unlock_irqrestore(&port->adapter->lock, flags);
netdev->trans_start = jiffies;
netif_wake_queue(netdev);
}
enable_irq(adapter->irq);
}
#endif
-/*
- * netxen_nic_ioctl () We provide the tcl/phanmon support through these
- * ioctls.
- */
-static int
-netxen_nic_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- int err = 0;
- unsigned long nr_bytes = 0;
- struct netxen_port *port = netdev_priv(netdev);
- struct netxen_adapter *adapter = port->adapter;
- char dev_name[NETXEN_NIC_NAME_LEN];
-
- DPRINTK(INFO, "doing ioctl for %s\n", netdev->name);
- switch (cmd) {
- case NETXEN_NIC_CMD:
- err = netxen_nic_do_ioctl(adapter, (void *)ifr->ifr_data, port);
- break;
-
- case NETXEN_NIC_NAME:
- DPRINTK(INFO, "ioctl cmd for NetXen\n");
- if (ifr->ifr_data) {
- sprintf(dev_name, "%s-%d", NETXEN_NIC_NAME_RSP,
- port->portnum);
- nr_bytes =
- copy_to_user((char __user *)ifr->ifr_data, dev_name,
- NETXEN_NIC_NAME_LEN);
- if (nr_bytes)
- err = -EIO;
-
- }
- break;
-
- default:
- DPRINTK(INFO, "ioctl cmd %x not supported\n", cmd);
- err = -EOPNOTSUPP;
- break;
- }
-
- return err;
-}
static struct pci_driver netxen_driver = {
.name = netxen_nic_driver_name,
if ((netxen_workq = create_singlethread_workqueue("netxen")) == 0)
return -ENOMEM;
- return pci_module_init(&netxen_driver);
+ return pci_register_driver(&netxen_driver);
}
module_init(netxen_init_module);
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* The EL3-specific entries in the device structure. */
dev->hard_start_xmit = &el3_start_xmit;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* The EL3-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
{
kio_addr_t ioaddr = dev->base_addr;
struct el3_private *priv = netdev_priv(dev);
+ unsigned long flags;
DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
"status %4.4x.\n", dev->name, (long)skb->len,
inw(ioaddr + EL3_STATUS));
+ spin_lock_irqsave(&priv->lock, flags);
+
priv->stats.tx_bytes += skb->len;
/* Put out the doubleword header... */
dev_kfree_skb(skb);
pop_tx_status(dev);
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
if (!netif_device_present(dev)) goto reschedule;
- EL3WINDOW(1);
/* Check for pending interrupt with expired latency timer: with
this, we can limp along even if the interrupt is blocked */
if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
(inb(ioaddr + EL3_TIMER) == 0xff)) {
if (!lp->fast_poll)
printk(KERN_WARNING "%s: interrupt(s) dropped!\n", dev->name);
- el3_interrupt(dev->irq, lp);
+ el3_interrupt(dev->irq, dev);
lp->fast_poll = HZ;
}
if (lp->fast_poll) {
p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
- p_dev->conf.Present = PRESENT_OPTION;
p_dev->irq.Instance = info->dev = dev;
p_dev->priv = info;
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
+ PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
link->irq.Handler = xirc2ps_interrupt;
link->irq.Instance = dev;
fixed_mdio_register_device(0, 100, 1);
#endif
-#ifdef CONFIX_FIXED_MII_10_FDX
+#ifdef CONFIG_FIXED_MII_10_FDX
fixed_mdio_register_device(0, 10, 1);
#endif
return 0;
return 0;
}
+EXPORT_SYMBOL(phy_ethtool_sset);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
{
return 0;
}
-
+EXPORT_SYMBOL(phy_ethtool_gset);
/* Note that this function is currently incompatible with the
* PHYCONTROL layer. It changes registers without regard to
return;
}
+static void ql_write_nvram_reg(struct ql3_adapter *qdev,
+ u32 __iomem *reg, u32 value)
+{
+ writel(value, reg);
+ readl(reg);
+ udelay(1);
+ return;
+}
+
static void ql_write_page0_reg(struct ql3_adapter *qdev,
u32 __iomem *reg, u32 value)
{
qdev->mem_map_registers;
qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1;
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
}
qdev->mem_map_registers;
/* Clock in a zero, then do the start bit */
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
AUBURN_EEPROM_DO_1);
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
AUBURN_EEPROM_CLK_RISE);
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
AUBURN_EEPROM_CLK_FALL);
* If the bit changed, then change the DO state to
* match
*/
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | dataBit);
previousBit = dataBit;
}
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | dataBit |
AUBURN_EEPROM_CLK_RISE);
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
* If the bit changed, then change the DO state to
* match
*/
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | dataBit);
previousBit = dataBit;
}
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
eeprom_cmd_data | dataBit |
AUBURN_EEPROM_CLK_RISE);
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->
struct ql3xxx_port_registers __iomem *port_regs =
qdev->mem_map_registers;
qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0;
- ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+ ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
}
/* Read the data bits */
/* The first bit is a dummy. Clock right over it. */
for (i = 0; i < dataBits; i++) {
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
AUBURN_EEPROM_CLK_RISE);
- ql_write_common_reg(qdev,
+ ql_write_nvram_reg(qdev,
&port_regs->CommonRegs.
serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
- ndev->features = NETIF_F_LLTX;
if (pci_using_dac)
ndev->features |= NETIF_F_HIGHDMA;
static int rx_copybreak = 200;
static int use_dac;
-static int ignore_parity_err;
static struct {
u32 msg_enable;
} debug = { -1 };
MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
-module_param_named(ignore_parity_err, ignore_parity_err, bool, 0);
-MODULE_PARM_DESC(ignore_parity_err, "Ignore PCI parity error as target. Default: false");
MODULE_LICENSE("GPL");
MODULE_VERSION(RTL8169_VERSION);
(tp->mac_version == RTL_GIGA_MAC_VER_02) ||
(tp->mac_version == RTL_GIGA_MAC_VER_03) ||
(tp->mac_version == RTL_GIGA_MAC_VER_04))
- RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl8169_set_rx_tx_config_registers(tp);
cmd = RTL_R16(CPlusCmd);
*
* Feel free to adjust to your needs.
*/
- if (ignore_parity_err)
+ if (pdev->broken_parity_status)
pci_cmd &= ~PCI_COMMAND_PARITY;
else
pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
}
}
- nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL);
+ nic->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
if (!nic->ufo_in_band_v)
return -ENOMEM;
- memset(nic->ufo_in_band_v, 0, size);
/* Allocation and initialization of RXDs in Rings */
size = 0;
for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
__le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
- ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+ ((u16 *)dev->dev_addr)[i] = le16_to_cpu(w);
}
sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
#define LINK_HZ (HZ/2)
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
struct skge_hw *hw = skge->hw;
struct skge_ring *ring = &skge->rx_ring;
struct skge_element *e;
+ unsigned long flags;
int to_do = min(dev->quota, *budget);
int work_done = 0;
if (work_done >= to_do)
return 1; /* not done */
- spin_lock_irq(&hw->hw_lock);
+ spin_lock_irqsave(&hw->hw_lock, flags);
__netif_rx_complete(dev);
hw->intr_mask |= irqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
- spin_unlock_irq(&hw->hw_lock);
+ spin_unlock_irqrestore(&hw->hw_lock, flags);
return 0;
}
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
onoff = !onoff;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-
if (onoff)
/* Turn off phy power saving */
reg1 &= ~phy_power[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_pci_read32(hw, PCI_DEV_REG1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
udelay(100);
}
imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ /*
+ * Both ports share the NAPI poll on port 0, so if necessary undo the
+ * the disable that is done in dev_close.
+ */
+ if (sky2->port == 0 && hw->ports > 1)
+ netif_poll_enable(dev);
+
sky2_gmac_reset(hw, port);
/* Stop transmitter */
module_exit(sky2_cleanup_module);
MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
int tx_throttle;
spinlock_t lock;
+ struct net_device *netdev;
+
#ifdef SMC_USE_DMA
/* DMA needs the physical address of the chip */
u_long physaddr;
* of autonegotiation.) If the RPC ANEG bit is cleared, the selection
* is controlled by the RPC SPEED and RPC DPLX bits.
*/
-static void smc911x_phy_configure(void *data)
+static void smc911x_phy_configure(struct work_struct *work)
{
- struct net_device *dev = data;
- struct smc911x_local *lp = netdev_priv(dev);
+ struct smc911x_local *lp = container_of(work, struct smc911x_local,
+ phy_configure);
+ struct net_device *dev = lp->netdev;
unsigned long ioaddr = dev->base_addr;
int phyaddr = lp->mii.phy_id;
int my_phy_caps; /* My PHY capabilities */
static void smc911x_poll_controller(struct net_device *dev)
{
disable_irq(dev->irq);
- smc911x_interrupt(dev->irq, dev, NULL);
+ smc911x_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
static int
smc911x_open(struct net_device *dev)
{
+ struct smc911x_local *lp = netdev_priv(dev);
+
DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
/*
smc911x_reset(dev);
/* Configure the PHY, initialize the link state */
- smc911x_phy_configure(dev);
+ smc911x_phy_configure(&lp->phy_configure);
/* Turn on Tx + Rx */
smc911x_enable(dev);
dev->poll_controller = smc911x_poll_controller;
#endif
- INIT_WORK(&lp->phy_configure, smc911x_phy_configure, dev);
+ INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
lp->mii.phy_id_mask = 0x1f;
lp->mii.reg_num_mask = 0x1f;
lp->mii.force_media = 0;
{
struct net_device *ndev;
struct resource *res;
+ struct smc911x_local *lp;
unsigned int *addr;
int ret;
ndev->dma = (unsigned char)-1;
ndev->irq = platform_get_irq(pdev, 0);
+ lp = netdev_priv(ndev);
+ lp->netdev = ndev;
addr = ioremap(res->start, SMC911X_IO_EXTENT);
if (!addr) {
}
#ifdef SMC_USE_DMA
else {
- struct smc911x_local *lp = netdev_priv(ndev);
lp->physaddr = res->start;
lp->dev = &pdev->dev;
}
smc911x_reset(ndev);
smc911x_enable(ndev);
if (lp->phy_type != 0)
- smc911x_phy_configure(ndev);
+ smc911x_phy_configure(&lp->phy_configure);
netif_device_attach(ndev);
}
}
#define ADVERTISE_MASK (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full | \
+ SUPPORTED_Pause | SUPPORTED_Autoneg)
#define DRV_NAME "sungem"
#define DRV_VERSION "0.98"
*
* This file could be shared with other drivers.
*
- * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)
*
* TODO:
- * - Implement WOL
* - Add support for PHYs that provide an IRQ line
* - Eventually moved the entire polling state machine in
* there (out of the eth driver), so that it can easily be
return 0;
}
+static int bcm5241_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+ data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ return 0;
+}
+
+static int bcm5241_suspend(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+ return 0;
+}
+
static int bcm5400_init(struct mii_phy* phy)
{
u16 data;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise */
val = phy_read(phy, MII_BCM5400_AUXSTATUS);
link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
- phy->duplex = phy_BCM5400_link_table[link_mode][0] ? DUPLEX_FULL : DUPLEX_HALF;
+ phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
+ DUPLEX_FULL : DUPLEX_HALF;
phy->speed = phy_BCM5400_link_table[link_mode][2] ?
SPEED_1000 :
- (phy_BCM5400_link_table[link_mode][1] ? SPEED_100 : SPEED_10);
+ (phy_BCM5400_link_table[link_mode][1] ?
+ SPEED_100 : SPEED_10);
val = phy_read(phy, MII_LPA);
- phy->pause = ((val & LPA_PAUSE) != 0);
+ phy->pause = (phy->duplex == DUPLEX_FULL) &&
+ ((val & LPA_PAUSE) != 0);
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
return 0;
}
+static int marvell88e1111_init(struct mii_phy* phy)
+{
+ u16 rev;
+
+ /* magic init sequence for rev 0 */
+ rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ if (rev == 0) {
+ phy_write(phy, 0x1d, 0x000a);
+ phy_write(phy, 0x1e, 0x0821);
+
+ phy_write(phy, 0x1d, 0x0006);
+ phy_write(phy, 0x1e, 0x8600);
+
+ phy_write(phy, 0x1d, 0x000b);
+ phy_write(phy, 0x1e, 0x0100);
+
+ phy_write(phy, 0x1d, 0x0004);
+ phy_write(phy, 0x1e, 0x4850);
+ }
+ return 0;
+}
+
static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
{
u16 ctl, adv;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise & enable crossover detect
static int marvell_read_link(struct mii_phy *phy)
{
- u16 status;
+ u16 status, pmask;
if (phy->autoneg) {
status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
phy->duplex = DUPLEX_FULL;
else
phy->duplex = DUPLEX_HALF;
- phy->pause = 0; /* XXX Check against spec ! */
+ pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |
+ MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;
+ phy->pause = (status & pmask) == pmask;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
/* Start/Restart aneg */
phy->speed = SPEED_100;
else
phy->speed = SPEED_10;
- phy->pause = 0;
+ phy->pause = (phy->duplex == DUPLEX_FULL) &&
+ ((lpa & LPA_PAUSE) != 0);
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
}
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+#define MII_BASIC_FEATURES \
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | \
+ SUPPORTED_Pause)
+
+/* On gigabit capable PHYs, we advertise Pause support but not asym pause
+ * support for now as I'm not sure it's supported and Darwin doesn't do
+ * it neither. --BenH.
+ */
+#define MII_GBIT_FEATURES \
+ (MII_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
/* Broadcom BCM 5201 */
static struct mii_phy_ops bcm5201_phy_ops = {
.ops = &bcm5221_phy_ops
};
+/* Broadcom BCM 5241 */
+static struct mii_phy_ops bcm5241_phy_ops = {
+ .suspend = bcm5241_suspend,
+ .init = bcm5241_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link,
+};
+static struct mii_phy_def bcm5241_phy_def = {
+ .phy_id = 0x0143bc30,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5241",
+ .features = MII_BASIC_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5241_phy_ops
+};
+
/* Broadcom BCM 5400 */
static struct mii_phy_ops bcm5400_phy_ops = {
.init = bcm5400_init,
.ops = &bcm5462V_phy_ops
};
-/* Marvell 88E1101 (Apple seem to deal with 2 different revs,
- * I masked out the 8 last bits to get both, but some specs
- * would be useful here) --BenH.
- */
-static struct mii_phy_ops marvell_phy_ops = {
+/* Marvell 88E1101 amd 88E1111 */
+static struct mii_phy_ops marvell88e1101_phy_ops = {
.suspend = generic_suspend,
.setup_aneg = marvell_setup_aneg,
.setup_forced = marvell_setup_forced,
.read_link = marvell_read_link
};
-static struct mii_phy_def marvell_phy_def = {
- .phy_id = 0x01410c00,
- .phy_id_mask = 0xffffff00,
- .name = "Marvell 88E1101",
+static struct mii_phy_ops marvell88e1111_phy_ops = {
+ .init = marvell88e1111_init,
+ .suspend = generic_suspend,
+ .setup_aneg = marvell_setup_aneg,
+ .setup_forced = marvell_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = marvell_read_link
+};
+
+/* two revs in darwin for the 88e1101 ... I could use a datasheet
+ * to get the proper names...
+ */
+static struct mii_phy_def marvell88e1101v1_phy_def = {
+ .phy_id = 0x01410c20,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1101v1",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1101v2_phy_def = {
+ .phy_id = 0x01410c60,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1101v2",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1111_phy_def = {
+ .phy_id = 0x01410cc0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1111",
.features = MII_GBIT_FEATURES,
.magic_aneg = 1,
- .ops = &marvell_phy_ops
+ .ops = &marvell88e1111_phy_ops
};
/* Generic implementation for most 10/100 PHYs */
static struct mii_phy_def* mii_phy_table[] = {
&bcm5201_phy_def,
&bcm5221_phy_def,
+ &bcm5241_phy_def,
&bcm5400_phy_def,
&bcm5401_phy_def,
&bcm5411_phy_def,
&bcm5421k2_phy_def,
&bcm5461_phy_def,
&bcm5462V_phy_def,
- &marvell_phy_def,
+ &marvell88e1101v1_phy_def,
+ &marvell88e1101v2_phy_def,
+ &marvell88e1111_phy_def,
&genmii_phy_def,
NULL
};
struct mii_phy
{
struct mii_phy_def* def;
- int advertising;
+ u32 advertising;
int mii_id;
/* 1: autoneg enabled, 0: disabled */
#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE 0x0001
#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR 0x0004
+/* MII BCM5241 Additional registers */
+#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR 0x0008
+
/* MII BCM5400 1000-BASET Control register */
#define MII_BCM5400_GB_CONTROL 0x09
#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200
#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE 0x0008
+#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE 0x0004
#endif /* __SUNGEM_PHY_H__ */
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.70"
-#define DRV_MODULE_RELDATE "December 1, 2006"
+#define DRV_MODULE_VERSION "3.72"
+#define DRV_MODULE_RELDATE "January 8, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
u32 phy_status;
int err;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 val;
+
+ val = tr32(GRC_MISC_CFG);
+ tw32_f(GRC_MISC_CFG, val & ~GRC_MISC_CFG_EPHY_IDDQ);
+ udelay(40);
+ }
err = tg3_readphy(tp, MII_BMSR, &phy_status);
err |= tg3_readphy(tp, MII_BMSR, &phy_status);
if (err != 0)
else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
- tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+ if (tp->tg3_flags2 & TG3_FLG2_PHY_ADJUST_TRIM) {
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
+ tg3_writephy(tp, MII_TG3_TEST1,
+ MII_TG3_TEST1_TRIM_EN | 0x4);
+ } else
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
}
/* Set Extended packet length bit (bit 14) on all chips that */
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
return;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 val;
+
+ tg3_bmcr_reset(tp);
+ val = tr32(GRC_MISC_CFG);
+ tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
+ udelay(40);
+ return;
+ } else {
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
*/
static int tg3_alloc_consistent(struct tg3 *tp)
{
- tp->rx_std_buffers = kmalloc((sizeof(struct ring_info) *
+ tp->rx_std_buffers = kzalloc((sizeof(struct ring_info) *
(TG3_RX_RING_SIZE +
TG3_RX_JUMBO_RING_SIZE)) +
(sizeof(struct tx_ring_info) *
if (!tp->rx_std_buffers)
return -ENOMEM;
- memset(tp->rx_std_buffers, 0,
- (sizeof(struct ring_info) *
- (TG3_RX_RING_SIZE +
- TG3_RX_JUMBO_RING_SIZE)) +
- (sizeof(struct tx_ring_info) *
- TG3_TX_RING_SIZE));
-
tp->rx_jumbo_buffers = &tp->rx_std_buffers[TG3_RX_RING_SIZE];
tp->tx_buffers = (struct tx_ring_info *)
&tp->rx_jumbo_buffers[TG3_RX_JUMBO_RING_SIZE];
struct tg3 *tp = netdev_priv(dev);
int err;
+ netif_carrier_off(tp->dev);
+
tg3_full_lock(tp, 0);
err = tg3_set_power_state(tp, PCI_D0);
tp->link_config.duplex = cmd->duplex;
}
+ tp->link_config.orig_speed = tp->link_config.speed;
+ tp->link_config.orig_duplex = tp->link_config.duplex;
+ tp->link_config.orig_autoneg = tp->link_config.autoneg;
+
if (netif_running(dev))
tg3_setup_phy(tp, 1);
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) {
tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
- else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
+ if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5755M)
+ tp->tg3_flags2 |= TG3_FLG2_PHY_ADJUST_TRIM;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
}
*/
pci_save_state(tp->pdev);
+ pci_set_drvdata(pdev, dev);
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "Cannot register net device, "
goto err_out_iounmap;
}
- pci_set_drvdata(pdev, dev);
-
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (%s) %s Ethernet ",
dev->name,
tp->board_part_number,
(pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
(((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
- netif_carrier_off(tp->dev);
-
return 0;
err_out_iounmap:
#define GRC_MISC_CFG_BOARD_ID_5788 0x00010000
#define GRC_MISC_CFG_BOARD_ID_5788M 0x00018000
#define GRC_MISC_CFG_BOARD_ID_AC91002A1 0x00018000
+#define GRC_MISC_CFG_EPHY_IDDQ 0x00200000
#define GRC_MISC_CFG_KEEP_GPHY_POWER 0x04000000
#define GRC_LOCAL_CTRL 0x00006808
#define GRC_LCLCTRL_INT_ACTIVE 0x00000001
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
+#define MII_TG3_TEST1 0x1e
+#define MII_TG3_TEST1_TRIM_EN 0x0010
+
/* There are two ways to manage the TX descriptors on the tigon3.
* Either the descriptors are in host DMA'able memory, or they
* exist only in the cards on-chip SRAM. All 16 send bds are under
#define TG3_FLG2_1SHOT_MSI 0x10000000
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
+#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
#include <linux/fsl_devices.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
+#include <linux/workqueue.h>
#include <asm/of_platform.h>
#include <asm/uaccess.h>
kfree(enet_addr_cont);
}
-static int set_mac_addr(__be16 __iomem *reg, u8 *mac)
+static void set_mac_addr(__be16 __iomem *reg, u8 *mac)
{
out_be16(®[0], ((u16)mac[5] << 8) | mac[4]);
out_be16(®[1], ((u16)mac[3] << 8) | mac[2]);
}
/* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void ugeth_phy_change(void *data)
+static void ugeth_phy_change(struct work_struct *work)
{
- struct net_device *dev = (struct net_device *)data;
- struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_private *ugeth =
+ container_of(work, struct ucc_geth_private, tq);
+ struct net_device *dev = ugeth->dev;
struct ucc_geth *ug_regs;
int result = 0;
#endif /* CONFIG_UGETH_NAPI */
/* Set up the PHY change work queue */
- INIT_WORK(&ugeth->tq, ugeth_phy_change, dev);
+ INIT_WORK(&ugeth->tq, ugeth_phy_change);
init_timer(&ugeth->phy_info_timer);
ugeth->phy_info_timer.function = &ugeth_phy_startup_timer;
static int genmii_config_aneg(struct ugeth_mii_info *mii_info);
static int genmii_update_link(struct ugeth_mii_info *mii_info);
static int genmii_read_status(struct ugeth_mii_info *mii_info);
-u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum);
-void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val);
+
+static u16 ucc_geth_phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
+{
+ u16 retval;
+ unsigned long flags;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irqsave(&mii_info->mdio_lock, flags);
+ retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
+ spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+
+ return retval;
+}
+
+static void ucc_geth_phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
+{
+ unsigned long flags;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irqsave(&mii_info->mdio_lock, flags);
+ mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
+ spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+}
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
advertise = mii_info->advertising;
/* Setup standard advertisement */
- adv = phy_read(mii_info, MII_ADVERTISE);
+ adv = ucc_geth_phy_read(mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
- phy_write(mii_info, MII_ADVERTISE, adv);
+ ucc_geth_phy_write(mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced(struct ugeth_mii_info *mii_info)
ugphy_vdbg("%s: IN", __FUNCTION__);
- ctrl = phy_read(mii_info, MII_BMCR);
+ ctrl = ucc_geth_phy_read(mii_info, MII_BMCR);
ctrl &=
~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
break;
}
- phy_write(mii_info, MII_BMCR, ctrl);
+ ucc_geth_phy_write(mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
ugphy_vdbg("%s: IN", __FUNCTION__);
- ctl = phy_read(mii_info, MII_BMCR);
+ ctl = ucc_geth_phy_read(mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(mii_info, MII_BMCR, ctl);
+ ucc_geth_phy_write(mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg(struct ugeth_mii_info *mii_info)
config_genmii_advert(mii_info);
advertise = mii_info->advertising;
- adv = phy_read(mii_info, MII_1000BASETCONTROL);
+ adv = ucc_geth_phy_read(mii_info, MII_1000BASETCONTROL);
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
MII_1000BASETCONTROL_HALFDUPLEXCAP);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(mii_info, MII_1000BASETCONTROL, adv);
+ ucc_geth_phy_write(mii_info, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
genmii_restart_aneg(mii_info);
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Do a fake read */
- phy_read(mii_info, MII_BMSR);
+ ucc_geth_phy_read(mii_info, MII_BMSR);
/* Read link and autonegotiation status */
- status = phy_read(mii_info, MII_BMSR);
+ status = ucc_geth_phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) == 0)
mii_info->link = 0;
else
return err;
if (mii_info->autoneg) {
- status = phy_read(mii_info, MII_LPA);
+ status = ucc_geth_phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
{
ugphy_vdbg("%s: IN", __FUNCTION__);
- phy_write(mii_info, 0x14, 0x0cd2);
- phy_write(mii_info, MII_BMCR,
- phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+ ucc_geth_phy_write(mii_info, 0x14, 0x0cd2);
+ ucc_geth_phy_write(mii_info, MII_BMCR,
+ ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
msleep(4000);
return 0;
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
- phy_write(mii_info, MII_BMCR, BMCR_RESET);
+ ucc_geth_phy_write(mii_info, MII_BMCR, BMCR_RESET);
- phy_write(mii_info, 0x1d, 0x1f);
- phy_write(mii_info, 0x1e, 0x200c);
- phy_write(mii_info, 0x1d, 0x5);
- phy_write(mii_info, 0x1e, 0);
- phy_write(mii_info, 0x1e, 0x100);
+ ucc_geth_phy_write(mii_info, 0x1d, 0x1f);
+ ucc_geth_phy_write(mii_info, 0x1e, 0x200c);
+ ucc_geth_phy_write(mii_info, 0x1d, 0x5);
+ ucc_geth_phy_write(mii_info, 0x1e, 0);
+ ucc_geth_phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg(mii_info);
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
- status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
+ status = ucc_geth_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Clear the interrupts by reading the reg */
- phy_read(mii_info, MII_M1011_IEVENT);
+ ucc_geth_phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+ ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return 0;
}
{
ugphy_vdbg("%s: IN", __FUNCTION__);
- phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
+ ucc_geth_phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
MII_CIS8201_AUXCONSTAT_INIT);
- phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
+ ucc_geth_phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
return 0;
}
if (mii_info->autoneg && mii_info->link) {
int speed;
- status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
+ status = ucc_geth_phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
{
ugphy_vdbg("%s: IN", __FUNCTION__);
- phy_read(mii_info, MII_CIS8201_ISTAT);
+ ucc_geth_phy_read(mii_info, MII_CIS8201_ISTAT);
return 0;
}
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
+ ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
else
- phy_write(mii_info, MII_CIS8201_IMASK, 0);
+ ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, 0);
return 0;
}
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
- status = phy_read(mii_info, MII_DM9161_SCSR);
+ status = ucc_geth_phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
{
struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data;
struct dm9161_private *priv = mii_info->priv;
- u16 status = phy_read(mii_info, MII_BMSR);
+ u16 status = ucc_geth_phy_read(mii_info, MII_BMSR);
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Reset is not done yet */
priv->resetdone = 0;
- phy_write(mii_info, MII_BMCR,
- phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+ ucc_geth_phy_write(mii_info, MII_BMCR,
+ ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
- phy_write(mii_info, MII_BMCR,
- phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
+ ucc_geth_phy_write(mii_info, MII_BMCR,
+ ucc_geth_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
config_genmii_advert(mii_info);
/* Start/Restart aneg */
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Clear the interrupts by reading the reg */
- phy_read(mii_info, MII_DM9161_INTR);
+ ucc_geth_phy_read(mii_info, MII_DM9161_INTR);
return 0;
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+ ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
- phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+ ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
NULL
};
-u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
-{
- u16 retval;
- unsigned long flags;
-
- ugphy_vdbg("%s: IN", __FUNCTION__);
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-
- return retval;
-}
-
-void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
-{
- unsigned long flags;
-
- ugphy_vdbg("%s: IN", __FUNCTION__);
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-}
-
/* Use the PHY ID registers to determine what type of PHY is attached
* to device dev. return a struct phy_info structure describing that PHY
*/
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read(mii_info, MII_PHYSID1);
+ phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read(mii_info, MII_PHYSID2);
+ phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
static int velocity_suspend(struct pci_dev *pdev, pm_message_t state);
static int velocity_resume(struct pci_dev *pdev);
+static DEFINE_SPINLOCK(velocity_dev_list_lock);
+static LIST_HEAD(velocity_dev_list);
+
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+
static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr);
static struct notifier_block velocity_inetaddr_notifier = {
.notifier_call = velocity_netdev_event,
};
-static DEFINE_SPINLOCK(velocity_dev_list_lock);
-static LIST_HEAD(velocity_dev_list);
-
static void velocity_register_notifier(void)
{
register_inetaddr_notifier(&velocity_inetaddr_notifier);
unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
}
-#else /* CONFIG_PM */
+#else
#define velocity_register_notifier() do {} while (0)
#define velocity_unregister_notifier() do {} while (0)
-#endif /* !CONFIG_PM */
+#endif
/*
* Internal board variants. At the moment we have only one
return 0;
}
+#ifdef CONFIG_INET
+
static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
{
struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
}
return NOTIFY_DONE;
}
+
+#endif
#endif
sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
/* extract core_id, core_rev, core_vendor */
- core_id = (sb_id_hi & 0xFFF0) >> 4;
- core_rev = (sb_id_hi & 0xF);
+ core_id = (sb_id_hi & 0x8FF0) >> 4;
+ core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
- sbimconfiglow |= 0x32;
+ if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
+ sbimconfiglow |= 0x32;
+ else
+ sbimconfiglow |= 0x53;
bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
}
if (err)
goto out;
- if (bcm->current_core->rev < 6 ||
+ if (bcm->current_core->rev < 6 &&
bcm->current_core->id == BCM43xx_COREID_PCI) {
value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
value |= (1 << backplane_flag_nr);
break;
}
#endif
- if (stats.len < sizeof(u->rx_data.header))
+ if (stats.len < sizeof(struct ieee80211_hdr_3addr))
break;
switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
case IEEE80211_FTYPE_MGMT:
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* Netwave private struct init. link/dev/node already taken care of,
* other stuff zero'd - Jean II */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
- p_dev->conf.Present = PRESENT_OPTION;
p_dev->priv = dev;
p_dev->irq.Instance = dev;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
- p_dev->conf.Present = PRESENT_OPTION;
dev = alloc_etherdev(sizeof(struct wl3501_card));
if (!dev)
static void set_multicast_hash_handler(struct work_struct *work);
+static void do_rx(unsigned long mac_ptr);
+
int zd_mac_init(struct zd_mac *mac,
struct net_device *netdev,
struct usb_interface *intf)
INIT_DELAYED_WORK(&mac->set_rts_cts_work, set_rts_cts_work);
INIT_DELAYED_WORK(&mac->set_basic_rates_work, set_basic_rates_work);
+ skb_queue_head_init(&mac->rx_queue);
+ tasklet_init(&mac->rx_tasklet, do_rx, (unsigned long)mac);
+ tasklet_disable(&mac->rx_tasklet);
+
ieee_init(ieee);
softmac_init(ieee80211_priv(netdev));
zd_chip_init(&mac->chip, netdev, intf);
void zd_mac_clear(struct zd_mac *mac)
{
flush_workqueue(zd_workqueue);
+ skb_queue_purge(&mac->rx_queue);
+ tasklet_kill(&mac->rx_tasklet);
zd_chip_clear(&mac->chip);
ZD_ASSERT(!spin_is_locked(&mac->lock));
ZD_MEMCLEAR(mac, sizeof(struct zd_mac));
struct zd_chip *chip = &mac->chip;
int r;
+ tasklet_enable(&mac->rx_tasklet);
+
r = zd_chip_enable_int(chip);
if (r < 0)
goto out;
*/
zd_chip_disable_rx(chip);
+ skb_queue_purge(&mac->rx_queue);
+ tasklet_disable(&mac->rx_tasklet);
housekeeping_disable(mac);
ieee80211softmac_stop(netdev);
if (changes & IEEE80211SOFTMAC_BSSINFOCHG_RATES) {
/* Set RTS rate to highest available basic rate */
- u8 rate = ieee80211softmac_highest_supported_rate(softmac,
+ u8 hi_rate = ieee80211softmac_highest_supported_rate(softmac,
&bssinfo->supported_rates, 1);
- rate = rate_to_zd_rate(rate);
+ hi_rate = rate_to_zd_rate(hi_rate);
spin_lock_irqsave(&mac->lock, flags);
- if (rate != mac->rts_rate) {
- mac->rts_rate = rate;
+ if (hi_rate != mac->rts_rate) {
+ mac->rts_rate = hi_rate;
need_set_rts_cts = 1;
}
spin_unlock_irqrestore(&mac->lock, flags);
return 0;
}
-int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length)
+static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
{
int r;
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
struct ieee80211_rx_stats stats;
const struct rx_status *status;
- struct sk_buff *skb;
- if (length < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN +
- IEEE80211_FCS_LEN + sizeof(struct rx_status))
- return -EINVAL;
+ if (skb->len < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN +
+ IEEE80211_FCS_LEN + sizeof(struct rx_status))
+ {
+ dev_dbg_f(zd_mac_dev(mac), "Packet with length %u to small.\n",
+ skb->len);
+ goto free_skb;
+ }
- r = fill_rx_stats(&stats, &status, mac, buffer, length);
- if (r)
- return r;
+ r = fill_rx_stats(&stats, &status, mac, skb->data, skb->len);
+ if (r) {
+ /* Only packets with rx errors are included here. */
+ goto free_skb;
+ }
- length -= ZD_PLCP_HEADER_SIZE+IEEE80211_FCS_LEN+
- sizeof(struct rx_status);
- buffer += ZD_PLCP_HEADER_SIZE;
+ __skb_pull(skb, ZD_PLCP_HEADER_SIZE);
+ __skb_trim(skb, skb->len -
+ (IEEE80211_FCS_LEN + sizeof(struct rx_status)));
- update_qual_rssi(mac, buffer, length, stats.signal, stats.rssi);
+ update_qual_rssi(mac, skb->data, skb->len, stats.signal,
+ status->signal_strength);
- r = filter_rx(ieee, buffer, length, &stats);
- if (r <= 0)
- return r;
+ r = filter_rx(ieee, skb->data, skb->len, &stats);
+ if (r <= 0) {
+ if (r < 0)
+ dev_dbg_f(zd_mac_dev(mac), "Error in packet.\n");
+ goto free_skb;
+ }
- skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
- if (!skb)
- return -ENOMEM;
if (ieee->iw_mode == IW_MODE_MONITOR)
- fill_rt_header(skb_put(skb, sizeof(struct zd_rt_hdr)), mac,
+ fill_rt_header(skb_push(skb, sizeof(struct zd_rt_hdr)), mac,
&stats, status);
- memcpy(skb_put(skb, length), buffer, length);
r = ieee80211_rx(ieee, skb, &stats);
- if (!r)
- dev_kfree_skb_any(skb);
+ if (r)
+ return;
+free_skb:
+ /* We are always in a soft irq. */
+ dev_kfree_skb(skb);
+}
+
+static void do_rx(unsigned long mac_ptr)
+{
+ struct zd_mac *mac = (struct zd_mac *)mac_ptr;
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&mac->rx_queue)) != NULL)
+ zd_mac_rx(mac, skb);
+}
+
+int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length)
+{
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
+ if (!skb) {
+ dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n");
+ return -ENOMEM;
+ }
+ skb_reserve(skb, sizeof(struct zd_rt_hdr));
+ memcpy(__skb_put(skb, length), buffer, length);
+ skb_queue_tail(&mac->rx_queue, skb);
+ tasklet_schedule(&mac->rx_tasklet);
return 0;
}
struct delayed_work set_rts_cts_work;
struct delayed_work set_basic_rates_work;
+ struct tasklet_struct rx_tasklet;
+ struct sk_buff_head rx_queue;
+
unsigned int stats_count;
u8 qual_buffer[ZD_MAC_STATS_BUFFER_SIZE];
u8 rssi_buffer[ZD_MAC_STATS_BUFFER_SIZE];
int zd_mac_set_mac_address(struct net_device *dev, void *p);
void zd_mac_set_multicast_list(struct net_device *netdev);
-int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length);
+int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length);
int zd_mac_set_regdomain(struct zd_mac *zd_mac, u8 regdomain);
u8 zd_mac_get_regdomain(struct zd_mac *zd_mac);
n = l+k;
if (n > length)
return;
- zd_mac_rx(mac, buffer+l, k);
+ zd_mac_rx_irq(mac, buffer+l, k);
if (i >= 2)
return;
l = (n+3) & ~3;
}
} else {
- zd_mac_rx(mac, buffer, length);
+ zd_mac_rx_irq(mac, buffer, length);
}
}
config PCI_MULTITHREAD_PROBE
bool "PCI Multi-threaded probe (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && BROKEN
help
Say Y here if you want the PCI core to spawn a new thread for
every PCI device that is probed. This can cause a huge
*
* This function frees all data allocated in acpiphp_glue_init()
*/
-void __exit acpiphp_glue_exit(void)
+void acpiphp_glue_exit(void)
{
acpi_pci_unregister_driver(&acpi_pci_hp_driver);
}
if (bufp == NULL)
goto read_table_done;
- lbuf = kmalloc(size, GFP_KERNEL);
+ lbuf = kzalloc(size, GFP_KERNEL);
dbg("%s: element count: %i, ASL table size: %i, &table = 0x%p\n",
__FUNCTION__, package->package.count, size, lbuf);
if (lbuf) {
*bufp = lbuf;
- memset(lbuf, 0, size);
} else {
size = -ENOMEM;
goto read_table_done;
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_location = {
+static struct hotplug_slot_attribute php_attr_location = {
.attr = {.name = "phy_location", .mode = S_IFREG | S_IRUGO},
.show = location_read_file,
};
-static void rpaphp_sysfs_add_attr_location (struct hotplug_slot *slot)
-{
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_location.attr);
-}
-
-static void rpaphp_sysfs_remove_attr_location (struct hotplug_slot *slot)
-{
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_location.attr);
-}
-
/* free up the memory used by a slot */
static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
{
list_del(&slot->rpaphp_slot_list);
/* remove "phy_location" file */
- rpaphp_sysfs_remove_attr_location(php_slot);
+ sysfs_remove_file(&php_slot->kobj, &php_attr_location.attr);
retval = pci_hp_deregister(php_slot);
if (retval)
int rpaphp_register_slot(struct slot *slot)
{
+ struct hotplug_slot *php_slot = slot->hotplug_slot;
int retval;
dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
__FUNCTION__, slot->dn->full_name, slot->index, slot->name,
slot->power_domain, slot->type);
+
/* should not try to register the same slot twice */
- if (is_registered(slot)) { /* should't be here */
+ if (is_registered(slot)) {
err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
- rpaphp_release_slot(slot->hotplug_slot);
- return -EAGAIN;
+ retval = -EAGAIN;
+ goto register_fail;
}
- retval = pci_hp_register(slot->hotplug_slot);
+
+ retval = pci_hp_register(php_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
- rpaphp_release_slot(slot->hotplug_slot);
- return retval;
+ goto register_fail;
}
-
- /* create "phy_locatoin" file */
- rpaphp_sysfs_add_attr_location(slot->hotplug_slot);
- /* add slot to our internal list */
- dbg("%s adding slot[%s] to rpaphp_slot_list\n",
- __FUNCTION__, slot->name);
+ /* create "phy_location" file */
+ retval = sysfs_create_file(&php_slot->kobj, &php_attr_location.attr);
+ if (retval) {
+ err("sysfs_create_file failed with error %d\n", retval);
+ goto sysfs_fail;
+ }
+ /* add slot to our internal list */
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
info("Slot [%s](PCI location=%s) registered\n", slot->name,
slot->location);
num_slots++;
return 0;
+
+sysfs_fail:
+ pci_hp_deregister(php_slot);
+register_fail:
+ rpaphp_release_slot(php_slot);
+ return retval;
}
int rpaphp_get_power_status(struct slot *slot, u8 * value)
extern int shpchp_debug;
extern struct workqueue_struct *shpchp_wq;
-/*#define dbg(format, arg...) do { if (shpchp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
-#define dbg(format, arg...) do { if (shpchp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
-#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
+#define dbg(format, arg...) \
+ do { \
+ if (shpchp_debug) \
+ printk("%s: " format, MY_NAME , ## arg); \
+ } while (0)
+#define err(format, arg...) \
+ printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
#define SLOT_NAME_SIZE 10
struct slot {
struct controller {
struct mutex crit_sect; /* critical section mutex */
struct mutex cmd_lock; /* command lock */
- struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
struct list_head slot_list;
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
- u8 bus;
- u8 device;
- u8 function;
u8 slot_device_offset;
- u8 add_support;
u32 pcix_misc2_reg; /* for amd pogo errata */
- enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
- u8 slot_bus; /* Bus where the slots handled by this controller sit */
u32 cap_offset;
unsigned long mmio_base;
unsigned long mmio_size;
+ void __iomem *creg;
+ struct timer_list poll_timer;
};
-
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
-
#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
#define PCIX_MISCII_OFFSET 0x48
#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
#define POWERON_STATE 3
#define POWEROFF_STATE 4
-#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
-
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
-#define REMOVE_NOT_SUPPORTED 0x00000003
-
-#define DISABLE_CARD 1
-
-/*
- * error Messages
- */
-#define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_button_on "PCI slot #%s - powering on due to button press.\n"
-#define msg_button_off "PCI slot #%s - powering off due to button press.\n"
-#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n"
-
-/* sysfs functions for the hotplug controller info */
extern int __must_check shpchp_create_ctrl_files(struct controller *ctrl);
-
-extern int shpchp_sysfs_enable_slot(struct slot *slot);
-extern int shpchp_sysfs_disable_slot(struct slot *slot);
-
-extern u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
-
-/* pci functions */
-extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
-extern int shpchp_configure_device(struct slot *p_slot);
-extern int shpchp_unconfigure_device(struct slot *p_slot);
-extern void shpchp_remove_ctrl_files(struct controller *ctrl);
-extern void cleanup_slots(struct controller *ctrl);
-extern void queue_pushbutton_work(struct work_struct *work);
-
+extern void shpchp_remove_ctrl_files(struct controller *ctrl);
+extern int shpchp_sysfs_enable_slot(struct slot *slot);
+extern int shpchp_sysfs_disable_slot(struct slot *slot);
+extern u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern int shpchp_configure_device(struct slot *p_slot);
+extern int shpchp_unconfigure_device(struct slot *p_slot);
+extern void cleanup_slots(struct controller *ctrl);
+extern void queue_pushbutton_work(struct work_struct *work);
+extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
#ifdef CONFIG_ACPI
static inline int get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
+ struct hotplug_params *hpp)
{
if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev->bus, hpp)))
return -ENODEV;
return 0;
}
-#define get_hp_hw_control_from_firmware(pdev) \
- do { \
- if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
- acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+#define get_hp_hw_control_from_firmware(pdev) \
+ do { \
+ if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+ acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev)));\
} while (0)
#else
#define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
volatile u32 serr_loc;
volatile u32 serr_intr_enable;
volatile u32 slot1;
- volatile u32 slot2;
- volatile u32 slot3;
- volatile u32 slot4;
- volatile u32 slot5;
- volatile u32 slot6;
- volatile u32 slot7;
- volatile u32 slot8;
- volatile u32 slot9;
- volatile u32 slot10;
- volatile u32 slot11;
- volatile u32 slot12;
} __attribute__ ((packed));
/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
- BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
- SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
- SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
- SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
- SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
- MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
- PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
- CMD = offsetof(struct ctrl_reg, cmd),
- CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
- INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
- SERR_LOC = offsetof(struct ctrl_reg, serr_loc),
- SERR_INTR_ENABLE = offsetof(struct ctrl_reg, serr_intr_enable),
- SLOT1 = offsetof(struct ctrl_reg, slot1),
- SLOT2 = offsetof(struct ctrl_reg, slot2),
- SLOT3 = offsetof(struct ctrl_reg, slot3),
- SLOT4 = offsetof(struct ctrl_reg, slot4),
- SLOT5 = offsetof(struct ctrl_reg, slot5),
- SLOT6 = offsetof(struct ctrl_reg, slot6),
- SLOT7 = offsetof(struct ctrl_reg, slot7),
- SLOT8 = offsetof(struct ctrl_reg, slot8),
- SLOT9 = offsetof(struct ctrl_reg, slot9),
- SLOT10 = offsetof(struct ctrl_reg, slot10),
- SLOT11 = offsetof(struct ctrl_reg, slot11),
- SLOT12 = offsetof(struct ctrl_reg, slot12),
-};
-typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
-struct php_ctlr_state_s {
- struct php_ctlr_state_s *pnext;
- struct pci_dev *pci_dev;
- unsigned int irq;
- unsigned long flags; /* spinlock's */
- u32 slot_device_offset;
- u32 num_slots;
- struct timer_list int_poll_timer; /* Added for poll event */
- php_intr_callback_t attention_button_callback;
- php_intr_callback_t switch_change_callback;
- php_intr_callback_t presence_change_callback;
- php_intr_callback_t power_fault_callback;
- void *callback_instance_id;
- void __iomem *creg; /* Ptr to controller register space */
+ BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
+ SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
+ SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
+ SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
+ SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
+ MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
+ PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
+ CMD = offsetof(struct ctrl_reg, cmd),
+ CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
+ INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
+ SERR_LOC = offsetof(struct ctrl_reg, serr_loc),
+ SERR_INTR_ENABLE = offsetof(struct ctrl_reg, serr_intr_enable),
+ SLOT1 = offsetof(struct ctrl_reg, slot1),
};
-/* Inline functions */
-
-/* Inline functions to check the sanity of a pointer that is passed to us */
-static inline int slot_paranoia_check (struct slot *slot, const char *function)
-{
- if (!slot) {
- dbg("%s - slot == NULL", function);
- return -1;
- }
- if (!slot->hotplug_slot) {
- dbg("%s - slot->hotplug_slot == NULL!", function);
- return -1;
- }
- return 0;
-}
-
-static inline struct slot *get_slot (struct hotplug_slot *hotplug_slot, const char *function)
+static inline struct slot *get_slot(struct hotplug_slot *hotplug_slot)
{
- struct slot *slot;
-
- if (!hotplug_slot) {
- dbg("%s - hotplug_slot == NULL\n", function);
- return NULL;
- }
-
- slot = (struct slot *)hotplug_slot->private;
- if (slot_paranoia_check (slot, function))
- return NULL;
- return slot;
+ return hotplug_slot->private;
}
-static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device)
+static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *slot;
- if (!ctrl)
- return NULL;
-
list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
if (slot->device == device)
return slot;
}
err("%s: slot (device=0x%x) not found\n", __FUNCTION__, device);
-
return NULL;
}
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
}
-enum php_ctlr_type {
- PCI,
- ISA,
- ACPI
-};
-
-int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
-
-int shpc_get_ctlr_slot_config( struct controller *ctrl,
- int *num_ctlr_slots,
- int *first_device_num,
- int *physical_slot_num,
- int *updown,
- int *flags);
-
struct hpc_ops {
- int (*power_on_slot ) (struct slot *slot);
- int (*slot_enable ) (struct slot *slot);
- int (*slot_disable ) (struct slot *slot);
- int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed);
- int (*get_power_status) (struct slot *slot, u8 *status);
- int (*get_attention_status) (struct slot *slot, u8 *status);
- int (*set_attention_status) (struct slot *slot, u8 status);
- int (*get_latch_status) (struct slot *slot, u8 *status);
- int (*get_adapter_status) (struct slot *slot, u8 *status);
-
- int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_adapter_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_mode1_ECC_cap) (struct slot *slot, u8 *mode);
- int (*get_prog_int) (struct slot *slot, u8 *prog_int);
-
- int (*query_power_fault) (struct slot *slot);
- void (*green_led_on) (struct slot *slot);
- void (*green_led_off) (struct slot *slot);
- void (*green_led_blink) (struct slot *slot);
- void (*release_ctlr) (struct controller *ctrl);
- int (*check_cmd_status) (struct controller *ctrl);
+ int (*power_on_slot)(struct slot *slot);
+ int (*slot_enable)(struct slot *slot);
+ int (*slot_disable)(struct slot *slot);
+ int (*set_bus_speed_mode)(struct slot *slot, enum pci_bus_speed speed);
+ int (*get_power_status)(struct slot *slot, u8 *status);
+ int (*get_attention_status)(struct slot *slot, u8 *status);
+ int (*set_attention_status)(struct slot *slot, u8 status);
+ int (*get_latch_status)(struct slot *slot, u8 *status);
+ int (*get_adapter_status)(struct slot *slot, u8 *status);
+ int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
+ int (*get_prog_int)(struct slot *slot, u8 *prog_int);
+ int (*query_power_fault)(struct slot *slot);
+ void (*green_led_on)(struct slot *slot);
+ void (*green_led_off)(struct slot *slot);
+ void (*green_led_blink)(struct slot *slot);
+ void (*release_ctlr)(struct controller *ctrl);
+ int (*check_cmd_status)(struct controller *ctrl);
};
#endif /* _SHPCHP_H */
slot->bus, slot->number);
}
-
-
-
-static int
-shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
- u8 busnum, u8 devnum)
-{
- int offset = devnum - ctrl->slot_device_offset;
-
- dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
- ctrl->slot_num_inc, offset);
- *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
- return 0;
-}
-
-
-
static int init_slots(struct controller *ctrl)
{
struct slot *slot;
struct hotplug_slot_info *info;
int retval = -ENOMEM;
int i;
- u32 sun;
for (i = 0; i < ctrl->num_slots; i++) {
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
slot->hp_slot = i;
slot->ctrl = ctrl;
- slot->bus = ctrl->slot_bus;
+ slot->bus = ctrl->pci_dev->subordinate->number;
slot->device = ctrl->slot_device_offset + i;
slot->hpc_ops = ctrl->hpc_ops;
+ slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i);
mutex_init(&slot->lock);
-
- if (shpchprm_get_physical_slot_number(ctrl, &sun,
- slot->bus, slot->device))
- goto error_info;
-
- slot->number = sun;
INIT_DELAYED_WORK(&slot->work, queue_pushbutton_work);
/* register this slot with the hotplug pci core */
}
}
-static int get_ctlr_slot_config(struct controller *ctrl)
-{
- int num_ctlr_slots;
- int first_device_num;
- int physical_slot_num;
- int updown;
- int rc;
- int flags;
-
- rc = shpc_get_ctlr_slot_config(ctrl, &num_ctlr_slots,
- &first_device_num, &physical_slot_num,
- &updown, &flags);
- if (rc) {
- err("%s: get_ctlr_slot_config fail for b:d (%x:%x)\n",
- __FUNCTION__, ctrl->bus, ctrl->device);
- return -1;
- }
-
- ctrl->num_slots = num_ctlr_slots;
- ctrl->slot_device_offset = first_device_num;
- ctrl->first_slot = physical_slot_num;
- ctrl->slot_num_inc = updown; /* either -1 or 1 */
-
- dbg("%s: num_slot(0x%x) 1st_dev(0x%x) psn(0x%x) updown(%d) for b:d "
- "(%x:%x)\n", __FUNCTION__, num_ctlr_slots, first_device_num,
- physical_slot_num, updown, ctrl->bus, ctrl->device);
-
- return 0;
-}
-
/*
* set_attention_status - Turns the Amber LED for a slot on, off or blink
*/
static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int enable_slot (struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int disable_slot (struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_address (struct hotplug_slot *hotplug_slot, u32 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
{
int rc;
struct controller *ctrl;
- struct slot *t_slot;
- int first_device_num; /* first PCI device number */
- int num_ctlr_slots; /* number of slots implemented */
if (!is_shpc_capable(pdev))
return -ENODEV;
pci_set_drvdata(pdev, ctrl);
- ctrl->bus = pdev->bus->number;
- ctrl->slot_bus = pdev->subordinate->number;
- ctrl->device = PCI_SLOT(pdev->devfn);
- ctrl->function = PCI_FUNC(pdev->devfn);
-
- dbg("ctrl bus=0x%x, device=%x, function=%x, irq=%x\n",
- ctrl->bus, ctrl->device, ctrl->function, pdev->irq);
-
- /*
- * Save configuration headers for this and subordinate PCI buses
- */
- rc = get_ctlr_slot_config(ctrl);
- if (rc) {
- err(msg_initialization_err, rc);
- goto err_out_release_ctlr;
- }
- first_device_num = ctrl->slot_device_offset;
- num_ctlr_slots = ctrl->num_slots;
-
- ctrl->add_support = 1;
-
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err(msg_initialization_err, 6);
+ err("%s: slot initialization failed\n", SHPC_MODULE_NAME);
goto err_out_release_ctlr;
}
- /* Now hpc_functions (slot->hpc_ops->functions) are ready */
- t_slot = shpchp_find_slot(ctrl, first_device_num);
-
- /* Check for operation bus speed */
- rc = t_slot->hpc_ops->get_cur_bus_speed(t_slot, &ctrl->speed);
- dbg("%s: t_slot->hp_slot %x\n", __FUNCTION__,t_slot->hp_slot);
-
- if (rc || ctrl->speed == PCI_SPEED_UNKNOWN) {
- err(SHPC_MODULE_NAME ": Can't get current bus speed. "
- "Set to 33MHz PCI.\n");
- ctrl->speed = PCI_SPEED_33MHz;
- }
-
rc = shpchp_create_ctrl_files(ctrl);
if (rc)
goto err_cleanup_slots;
return 0;
}
-u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
}
-u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 getstatus;
u32 event_type;
return 1;
}
-u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
return 1;
}
-u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, p_slot->name);
+ info("PCI slot #%s - powering off due to button "
+ "press.\n", p_slot->name);
} else {
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, p_slot->name);
+ info("PCI slot #%s - powering on due to button "
+ "press.\n", p_slot->name);
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
else
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- info(msg_button_cancel, p_slot->name);
+ info("PCI slot #%s - action canceled due to button press\n",
+ p_slot->name);
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
#define SLOT_SERR_INT_MASK 0x3
DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
-static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */
-static int ctlr_seq_num = 0; /* Controller sequenc # */
-static spinlock_t list_lock;
-
static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
static irqreturn_t shpc_isr(int irq, void *dev_id);
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec);
+static void start_int_poll_timer(struct controller *ctrl, int sec);
static int hpc_check_cmd_status(struct controller *ctrl);
static inline u8 shpc_readb(struct controller *ctrl, int reg)
{
- return readb(ctrl->hpc_ctlr_handle->creg + reg);
+ return readb(ctrl->creg + reg);
}
static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val)
{
- writeb(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writeb(val, ctrl->creg + reg);
}
static inline u16 shpc_readw(struct controller *ctrl, int reg)
{
- return readw(ctrl->hpc_ctlr_handle->creg + reg);
+ return readw(ctrl->creg + reg);
}
static inline void shpc_writew(struct controller *ctrl, int reg, u16 val)
{
- writew(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writew(val, ctrl->creg + reg);
}
static inline u32 shpc_readl(struct controller *ctrl, int reg)
{
- return readl(ctrl->hpc_ctlr_handle->creg + reg);
+ return readl(ctrl->creg + reg);
}
static inline void shpc_writel(struct controller *ctrl, int reg, u32 val)
{
- writel(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writel(val, ctrl->creg + reg);
}
static inline int shpc_indirect_read(struct controller *ctrl, int index,
/*
* This is the interrupt polling timeout function.
*/
-static void int_poll_timeout(unsigned long lphp_ctlr)
+static void int_poll_timeout(unsigned long data)
{
- struct php_ctlr_state_s *php_ctlr =
- (struct php_ctlr_state_s *)lphp_ctlr;
+ struct controller *ctrl = (struct controller *)data;
DBG_ENTER_ROUTINE
/* Poll for interrupt events. regs == NULL => polling */
- shpc_isr(0, php_ctlr->callback_instance_id);
+ shpc_isr(0, ctrl);
- init_timer(&php_ctlr->int_poll_timer);
+ init_timer(&ctrl->poll_timer);
if (!shpchp_poll_time)
shpchp_poll_time = 2; /* default polling interval is 2 sec */
- start_int_poll_timer(php_ctlr, shpchp_poll_time);
+ start_int_poll_timer(ctrl, shpchp_poll_time);
DBG_LEAVE_ROUTINE
}
/*
* This function starts the interrupt polling timer.
*/
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec)
+static void start_int_poll_timer(struct controller *ctrl, int sec)
{
/* Clamp to sane value */
if ((sec <= 0) || (sec > 60))
sec = 2;
- php_ctlr->int_poll_timer.function = &int_poll_timeout;
- php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr;
- php_ctlr->int_poll_timer.expires = jiffies + sec * HZ;
- add_timer(&php_ctlr->int_poll_timer);
+ ctrl->poll_timer.function = &int_poll_timeout;
+ ctrl->poll_timer.data = (unsigned long)ctrl;
+ ctrl->poll_timer.expires = jiffies + sec * HZ;
+ add_timer(&ctrl->poll_timer);
}
static inline int is_ctrl_busy(struct controller *ctrl)
shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK);
}
-int shpc_get_ctlr_slot_config(struct controller *ctrl,
- int *num_ctlr_slots, /* number of slots in this HPC */
- int *first_device_num, /* PCI dev num of the first slot in this SHPC */
- int *physical_slot_num, /* phy slot num of the first slot in this SHPC */
- int *updown, /* physical_slot_num increament: 1 or -1 */
- int *flags)
-{
- u32 slot_config;
-
- DBG_ENTER_ROUTINE
-
- slot_config = shpc_readl(ctrl, SLOT_CONFIG);
- *first_device_num = (slot_config & FIRST_DEV_NUM) >> 8;
- *num_ctlr_slots = slot_config & SLOT_NUM;
- *physical_slot_num = (slot_config & PSN) >> 16;
- *updown = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
-
- dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num);
-
- DBG_LEAVE_ROUTINE
- return 0;
-}
-
static void hpc_release_ctlr(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
- struct php_ctlr_state_s *p, *p_prev;
int i;
u32 slot_reg, serr_int;
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
- if (shpchp_poll_mode) {
- del_timer(&php_ctlr->int_poll_timer);
- } else {
- if (php_ctlr->irq) {
- free_irq(php_ctlr->irq, ctrl);
- php_ctlr->irq = 0;
- pci_disable_msi(php_ctlr->pci_dev);
- }
- }
-
- if (php_ctlr->pci_dev) {
- iounmap(php_ctlr->creg);
- release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
- php_ctlr->pci_dev = NULL;
- }
-
- spin_lock(&list_lock);
- p = php_ctlr_list_head;
- p_prev = NULL;
- while (p) {
- if (p == php_ctlr) {
- if (p_prev)
- p_prev->pnext = p->pnext;
- else
- php_ctlr_list_head = p->pnext;
- break;
- } else {
- p_prev = p;
- p = p->pnext;
- }
+ if (shpchp_poll_mode)
+ del_timer(&ctrl->poll_timer);
+ else {
+ free_irq(ctrl->pci_dev->irq, ctrl);
+ pci_disable_msi(ctrl->pci_dev);
}
- spin_unlock(&list_lock);
- kfree(php_ctlr);
+ iounmap(ctrl->creg);
+ release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
/*
* If this is the last controller to be released, destroy the
if (atomic_dec_and_test(&shpchp_num_controllers))
destroy_workqueue(shpchp_wq);
-DBG_LEAVE_ROUTINE
-
+ DBG_LEAVE_ROUTINE
}
static int hpc_power_on_slot(struct slot * slot)
static irqreturn_t shpc_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
u32 serr_int, slot_reg, intr_loc, intr_loc2;
int hp_slot;
__FUNCTION__, hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
- php_ctlr->switch_change_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_switch_change(hp_slot, ctrl);
if (slot_reg & BUTTON_PRESS_DETECTED)
- php_ctlr->attention_button_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_attention_button(hp_slot, ctrl);
if (slot_reg & PRSNT_CHANGE_DETECTED)
- php_ctlr->presence_change_callback(
- hp_slot , php_ctlr->callback_instance_id);
+ shpchp_handle_presence_change(hp_slot, ctrl);
if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED))
- php_ctlr->power_fault_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_power_fault(hp_slot, ctrl);
/* Clear all slot events */
slot_reg &= ~SLOT_REG_RSVDZ_MASK;
.release_ctlr = hpc_release_ctlr,
};
-int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
+int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
{
- struct php_ctlr_state_s *php_ctlr, *p;
- void *instance_id = ctrl;
int rc = -1, num_slots = 0;
u8 hp_slot;
u32 shpc_base_offset;
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
- spin_lock_init(&list_lock);
- php_ctlr = kzalloc(sizeof(*php_ctlr), GFP_KERNEL);
-
- if (!php_ctlr) { /* allocate controller state data */
- err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
- goto abort;
- }
-
- php_ctlr->pci_dev = pdev; /* save pci_dev in context */
-
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450)) {
/* amd shpc driver doesn't use Base Offset; assume 0 */
ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
if (!ctrl->cap_offset) {
err("%s : cap_offset == 0\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
dbg("%s: cap_offset = %x\n", __FUNCTION__, ctrl->cap_offset);
rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
if (rc) {
err("%s: cannot read base_offset\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
rc = shpc_indirect_read(ctrl, 3, &tempdword);
if (rc) {
err("%s: cannot read slot config\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
num_slots = tempdword & SLOT_NUM;
dbg("%s: num_slots (indirect) %x\n", __FUNCTION__, num_slots);
if (rc) {
err("%s: cannot read creg (index = %d)\n",
__FUNCTION__, i);
- goto abort_free_ctlr;
+ goto abort;
}
dbg("%s: offset %d: value %x\n", __FUNCTION__,i,
tempdword);
rc = pci_enable_device(pdev);
if (rc) {
err("%s: pci_enable_device failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
err("%s: cannot reserve MMIO region\n", __FUNCTION__);
rc = -1;
- goto abort_free_ctlr;
+ goto abort;
}
- php_ctlr->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
- if (!php_ctlr->creg) {
+ ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
+ if (!ctrl->creg) {
err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__,
ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
rc = -1;
- goto abort_free_ctlr;
+ goto abort;
}
- dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
+ dbg("%s: ctrl->creg %p\n", __FUNCTION__, ctrl->creg);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->cmd_lock);
/* Setup wait queue */
init_waitqueue_head(&ctrl->queue);
- /* Find the IRQ */
- php_ctlr->irq = pdev->irq;
- php_ctlr->attention_button_callback = shpchp_handle_attention_button,
- php_ctlr->switch_change_callback = shpchp_handle_switch_change;
- php_ctlr->presence_change_callback = shpchp_handle_presence_change;
- php_ctlr->power_fault_callback = shpchp_handle_power_fault;
- php_ctlr->callback_instance_id = instance_id;
-
- ctrl->hpc_ctlr_handle = php_ctlr;
ctrl->hpc_ops = &shpchp_hpc_ops;
/* Return PCI Controller Info */
slot_config = shpc_readl(ctrl, SLOT_CONFIG);
- php_ctlr->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
- php_ctlr->num_slots = slot_config & SLOT_NUM;
- dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset);
- dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots);
+ ctrl->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
+ ctrl->num_slots = slot_config & SLOT_NUM;
+ ctrl->first_slot = (slot_config & PSN) >> 16;
+ ctrl->slot_num_inc = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
/* Mask the MRL sensor SERR Mask of individual slot in
* Slot SERR-INT Mask & clear all the existing event if any
*/
- for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
hp_slot, slot_reg);
shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
}
- if (shpchp_poll_mode) {/* Install interrupt polling code */
- /* Install and start the interrupt polling timer */
- init_timer(&php_ctlr->int_poll_timer);
- start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
+ if (shpchp_poll_mode) {
+ /* Install interrupt polling timer. Start with 10 sec delay */
+ init_timer(&ctrl->poll_timer);
+ start_int_poll_timer(ctrl, 10);
} else {
/* Installs the interrupt handler */
rc = pci_enable_msi(pdev);
if (rc) {
info("Can't get msi for the hotplug controller\n");
info("Use INTx for the hotplug controller\n");
- } else
- php_ctlr->irq = pdev->irq;
+ }
- rc = request_irq(php_ctlr->irq, shpc_isr, IRQF_SHARED, MY_NAME, (void *) ctrl);
- dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
+ rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
+ MY_NAME, (void *)ctrl);
+ dbg("%s: request_irq %d for hpc%d (returns %d)\n",
+ __FUNCTION__, ctrl->pci_dev->irq,
+ atomic_read(&shpchp_num_controllers), rc);
if (rc) {
- err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
- goto abort_free_ctlr;
+ err("Can't get irq %d for the hotplug controller\n",
+ ctrl->pci_dev->irq);
+ goto abort_iounmap;
}
}
dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__,
PCI_FUNC(pdev->devfn), pdev->irq);
get_hp_hw_control_from_firmware(pdev);
- /* Add this HPC instance into the HPC list */
- spin_lock(&list_lock);
- if (php_ctlr_list_head == 0) {
- php_ctlr_list_head = php_ctlr;
- p = php_ctlr_list_head;
- p->pnext = NULL;
- } else {
- p = php_ctlr_list_head;
-
- while (p->pnext)
- p = p->pnext;
-
- p->pnext = php_ctlr;
- }
- spin_unlock(&list_lock);
-
- ctlr_seq_num++;
-
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
shpchp_wq = create_singlethread_workqueue("shpchpd");
if (!shpchp_wq) {
rc = -ENOMEM;
- goto abort_free_ctlr;
+ goto abort_iounmap;
}
}
/*
* Unmask all event interrupts of all slots
*/
- for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
hp_slot, slot_reg);
return 0;
/* We end up here for the many possible ways to fail this API. */
-abort_free_ctlr:
- if (php_ctlr->creg)
- iounmap(php_ctlr->creg);
- kfree(php_ctlr);
+abort_iounmap:
+ iounmap(ctrl->creg);
abort:
DBG_LEAVE_ROUTINE
return rc;
int pos;
int irq;
- pos = pci_find_capability(dev, PCI_CAP_ID_HT);
- while (pos) {
- u8 subtype;
- pci_read_config_byte(dev, pos + 3, &subtype);
- if (subtype == HT_CAPTYPE_IRQ)
- break;
- pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT);
- }
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
if (!pos)
return -EINVAL;
}
/**
- * pci_match_device - Tell if a PCI device structure has a matching
- * PCI device id structure
+ * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
* @drv: the PCI driver to match against
* @dev: the PCI device structure to match against
*
const struct pci_device_id *pci_match_device(struct pci_driver *drv,
struct pci_dev *dev)
{
- const struct pci_device_id *id;
struct pci_dynid *dynid;
- id = pci_match_id(drv->id_table, dev);
- if (id)
- return id;
-
- /* static ids didn't match, lets look at the dynamic ones */
+ /* Look at the dynamic ids first, before the static ones */
spin_lock(&drv->dynids.lock);
list_for_each_entry(dynid, &drv->dynids.list, node) {
if (pci_match_one_device(&dynid->id, dev)) {
}
}
spin_unlock(&drv->dynids.lock);
- return NULL;
+
+ return pci_match_id(drv->id_table, dev);
}
static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
if (drv && drv->resume_early)
error = drv->resume_early(pci_dev);
return error;
#endif /* 0 */
-static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap)
+#define PCI_FIND_CAP_TTL 48
+
+static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap, int *ttl)
{
u8 id;
- int ttl = 48;
- while (ttl--) {
+ while ((*ttl)--) {
pci_bus_read_config_byte(bus, devfn, pos, &pos);
if (pos < 0x40)
break;
return 0;
}
+static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
+}
+
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
{
return __pci_find_next_cap(dev->bus, dev->devfn,
}
EXPORT_SYMBOL_GPL(pci_find_next_capability);
-static int __pci_bus_find_cap(struct pci_bus *bus, unsigned int devfn, u8 hdr_type, int cap)
+static int __pci_bus_find_cap_start(struct pci_bus *bus,
+ unsigned int devfn, u8 hdr_type)
{
u16 status;
- u8 pos;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
- pos = PCI_CAPABILITY_LIST;
- break;
+ return PCI_CAPABILITY_LIST;
case PCI_HEADER_TYPE_CARDBUS:
- pos = PCI_CB_CAPABILITY_LIST;
- break;
+ return PCI_CB_CAPABILITY_LIST;
default:
return 0;
}
- return __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return 0;
}
/**
*/
int pci_find_capability(struct pci_dev *dev, int cap)
{
- return __pci_bus_find_cap(dev->bus, dev->devfn, dev->hdr_type, cap);
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
+
+ return pos;
}
/**
*/
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
{
+ int pos;
u8 hdr_type;
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
- return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
+ pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
+ if (pos)
+ pos = __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return pos;
}
/**
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
+static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
+{
+ int rc, ttl = PCI_FIND_CAP_TTL;
+ u8 cap, mask;
+
+ if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
+ mask = HT_3BIT_CAP_MASK;
+ else
+ mask = HT_5BIT_CAP_MASK;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
+ PCI_CAP_ID_HT, &ttl);
+ while (pos) {
+ rc = pci_read_config_byte(dev, pos + 3, &cap);
+ if (rc != PCIBIOS_SUCCESSFUL)
+ return 0;
+
+ if ((cap & mask) == ht_cap)
+ return pos;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
+ pos + PCI_CAP_LIST_NEXT,
+ PCI_CAP_ID_HT, &ttl);
+ }
+
+ return 0;
+}
+/**
+ * pci_find_next_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @pos: Position from which to continue searching
+ * @ht_cap: Hypertransport capability code
+ *
+ * To be used in conjunction with pci_find_ht_capability() to search for
+ * all capabilities matching @ht_cap. @pos should always be a value returned
+ * from pci_find_ht_capability().
+ *
+ * NB. To be 100% safe against broken PCI devices, the caller should take
+ * steps to avoid an infinite loop.
+ */
+int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
+{
+ return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
+}
+EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
+
+/**
+ * pci_find_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @ht_cap: Hypertransport capability code
+ *
+ * Tell if a device supports a given Hypertransport capability.
+ * Returns an address within the device's PCI configuration space
+ * or 0 in case the device does not support the request capability.
+ * The address points to the PCI capability, of type PCI_CAP_ID_HT,
+ * which has a Hypertransport capability matching @ht_cap.
+ */
+int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
+{
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
+
+ return pos;
+}
+EXPORT_SYMBOL_GPL(pci_find_ht_capability);
+
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
return -ENODEV;
pci_set_master(dev);
- if (!dev->irq) {
+ if (!dev->irq && dev->pin) {
printk(KERN_WARNING
"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
__FUNCTION__, dev->device, dev->vendor);
dev->irq = irq;
}
+#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+
/**
* pci_setup_device - fill in class and map information of a device
* @dev: the device structure to fill
if ((progif & 1) == 0) {
dev->resource[0].start = 0x1F0;
dev->resource[0].end = 0x1F7;
- dev->resource[0].flags = IORESOURCE_IO;
+ dev->resource[0].flags = LEGACY_IO_RESOURCE;
dev->resource[1].start = 0x3F6;
dev->resource[1].end = 0x3F6;
- dev->resource[1].flags = IORESOURCE_IO;
+ dev->resource[1].flags = LEGACY_IO_RESOURCE;
}
if ((progif & 4) == 0) {
dev->resource[2].start = 0x170;
dev->resource[2].end = 0x177;
- dev->resource[2].flags = IORESOURCE_IO;
+ dev->resource[2].flags = LEGACY_IO_RESOURCE;
dev->resource[3].start = 0x376;
dev->resource[3].end = 0x376;
- dev->resource[3].flags = IORESOURCE_IO;
+ dev->resource[3].flags = LEGACY_IO_RESOURCE;
}
}
break;
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
-static void __devinit quirk_passive_release(struct pci_dev *dev)
+static void quirk_passive_release(struct pci_dev *dev)
{
struct pci_dev *d = NULL;
unsigned char dlc;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
but VIA don't answer queries. If you happen to have good contacts at VIA
* Updated based on further information from the site and also on
* information provided by VIA
*/
-static void __devinit quirk_vialatency(struct pci_dev *dev)
+static void quirk_vialatency(struct pci_dev *dev)
{
struct pci_dev *p;
u8 rev;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
/*
* VIA Apollo VP3 needs ETBF on BT848/878
* TODO: When we have device-specific interrupt routers,
* this code will go away from quirks.
*/
-static void __devinit quirk_via_ioapic(struct pci_dev *dev)
+static void quirk_via_ioapic(struct pci_dev *dev)
{
u8 tmp;
pci_write_config_byte (dev, 0x58, tmp);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
/*
* VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
* Set this bit to get rid of cycle wastage.
* Otherwise uncritical.
*/
-static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
{
u8 misc_control2;
#define BYPASS_APIC_DEASSERT 8
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
/*
* The AMD io apic can hang the box when an apic irq is masked.
#define AMD8131_revB0 0x11
#define AMD8131_MISC 0x40
#define AMD8131_NIOAMODE_BIT 0
-static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
+static void quirk_amd_8131_ioapic(struct pci_dev *dev)
{
unsigned char revid, tmp;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
-/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * Some of the on-chip devices are actually '586 devices' so they are
- * listed here.
- */
-
-static int via_irq_fixup_needed = -1;
/*
- * As some VIA hardware is available in PCI-card form, we need to restrict
- * this quirk to VIA PCI hardware built onto VIA-based motherboards only.
- * We try to locate a VIA southbridge before deciding whether the quirk
- * should be applied.
+ * VIA bridges which have VLink
*/
-static const struct pci_device_id via_irq_fixup_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_VIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_ISA << 8,
- .class_mask = 0xffff00,
- },
+
+static const struct pci_device_id via_vlink_fixup_tbl[] = {
+ /* Internal devices need IRQ line routing, pre VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8231), 17 },
+ /* Devices with VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
{ 0, },
};
-static void quirk_via_irq(struct pci_dev *dev)
+/**
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to
+ * ensure that the IRQ line register which usually is not relevant
+ * for PCI cards, is actually written so that interrupts get sent
+ * to the right place
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
{
+ const struct pci_device_id *via_vlink_fixup;
+ static int dev_lo = -1, dev_hi = 18;
u8 irq, new_irq;
- if (via_irq_fixup_needed == -1)
- via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl);
+ /* Check if we have VLink and cache the result */
- if (!via_irq_fixup_needed)
+ /* Checked already - no */
+ if (dev_lo == -2)
return;
+ /* Not checked - see what bridge we have and find the device
+ ranges */
+
+ if (dev_lo == -1) {
+ via_vlink_fixup = pci_find_present(via_vlink_fixup_tbl);
+ if (via_vlink_fixup == NULL) {
+ dev_lo = -2;
+ return;
+ }
+ dev_lo = via_vlink_fixup->driver_data;
+ /* 82C686 is special - 0/0 */
+ if (dev_lo == 0)
+ dev_hi = 0;
+ }
new_irq = dev->irq;
/* Don't quirk interrupts outside the legacy IRQ range */
if (!new_irq || new_irq > 15)
return;
+ /* Internal device ? */
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > dev_hi ||
+ PCI_SLOT(dev->devfn) < dev_lo)
+ return;
+
+ /* This is an internal VLink device on a PIC interrupt. The BIOS
+ ought to have set this but may not have, so we redo it */
+
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA VLink IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
* do this even if the Linux CardBus driver is not loaded, because
* the Linux i82365 driver does not (and should not) handle CardBus.
*/
-static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
+static void quirk_cardbus_legacy(struct pci_dev *dev)
{
if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
* To be fair to AMD, it follows the spec by default, its BIOS people
* who turn it off!
*/
-static void __devinit quirk_amd_ordering(struct pci_dev *dev)
+static void quirk_amd_ordering(struct pci_dev *dev)
{
u32 pcic;
pci_read_config_dword(dev, 0x4C, &pcic);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
/*
* DreamWorks provided workaround for Dunord I-3000 problem
* datasheets found at http://www.national.com/ds/GX for info on what
* these bits do. <christer@weinigel.se>
*/
-static void __init quirk_mediagx_master(struct pci_dev *dev)
+static void quirk_mediagx_master(struct pci_dev *dev)
{
u8 reg;
pci_read_config_byte(dev, 0x41, ®);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
/*
* Ensure C0 rev restreaming is off. This is normally done by
* the BIOS but in the odd case it is not the results are corruption
* hence the presence of a Linux check
*/
-static void __init quirk_disable_pxb(struct pci_dev *pdev)
+static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
u8 rev;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
+
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev)
+{
+ /* set sb600 sata to ahci mode */
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ u8 tmp;
+
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = 0x010601;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata);
/*
* Serverworks CSB5 IDE does not fully support native mode
* runs everywhere at present we suppress the printk output in most
* irrelevant cases.
*/
-static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+static void k8t_sound_hostbridge(struct pci_dev *dev)
{
unsigned char val;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
-#ifndef CONFIG_ACPI_SLEEP
/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
- *
- * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
- * will cause thermal management to break down, and causing machine to
- * overheat.
*/
-static int __initdata asus_hides_smbus;
+static int asus_hides_smbus;
static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
case 0x186a: /* M6Ne notebook */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ switch (dev->subsystem_device) {
+ case 0x80f2: /* P4P800-X */
+ asus_hides_smbus = 1;
+ }
if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
switch (dev->subsystem_device) {
case 0x1882: /* M6V notebook */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
-static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
u16 val;
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
-static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
{
u32 val, rcba;
void __iomem *base;
printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
-
-#endif
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
-static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
{
u8 val = 0;
- printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
- pci_read_config_byte(dev, 0x77, &val);
- pci_write_config_byte(dev, 0x77, val & ~0x10);
pci_read_config_byte(dev, 0x77, &val);
+ if (val & 0x10) {
+ printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
+ pci_write_config_byte(dev, 0x77, val & ~0x10);
+ }
}
/*
#define SIS_DETECT_REGISTER 0x40
-static void __init quirk_sis_503(struct pci_dev *dev)
+static void quirk_sis_503(struct pci_dev *dev)
{
u8 reg;
u16 devid;
printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible);
/*
- * Ok, it now shows up as a 96x.. The 96x quirks are after
- * the 503 quirk in the quirk table, so they'll automatically
- * run and enable things like the SMBus device
+ * Ok, it now shows up as a 96x.. run the 96x quirk by
+ * hand in case it has already been processed.
+ * (depends on link order, which is apparently not guaranteed)
*/
dev->device = devid;
+ quirk_sis_96x_smbus(dev);
}
static void __init quirk_sis_96x_compatible(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
/*
* On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
* and MC97 modem controller are disabled when a second PCI soundcard is
* present. This patch, tweaking the VT8237 ISA bridge, enables them.
* -- bjd
*/
-static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
{
u8 val;
int asus_hides_ac97 = 0;
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
+
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
/*
* the PCI scanning.
*/
-static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_dualfn(struct pci_dev *pdev)
{
u32 conf;
u8 hdr;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
#endif
extern struct pci_fixup __end_pci_fixups_final[];
extern struct pci_fixup __start_pci_fixups_enable[];
extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
end = __end_pci_fixups_enable;
break;
+ case pci_fixup_resume:
+ start = __start_pci_fixups_resume;
+ end = __end_pci_fixups_resume;
+ break;
+
default:
/* stupid compiler warning, you would think with an enum... */
return;
* Force it to be linked by setting the corresponding control bit in the
* config space.
*/
-static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
{
uint8_t b;
if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
#ifdef CONFIG_PCI_MSI
/* To disable MSI globally */
* return 1 if a HT MSI capability is found and enabled */
static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
{
- u8 pos;
- int ttl;
- for (pos = pci_find_capability(dev, PCI_CAP_ID_HT), ttl = 48;
- pos && ttl;
- pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT), ttl--) {
- u32 cap_hdr;
- /* MSI mapping section according to Hypertransport spec */
- if (pci_read_config_dword(dev, pos, &cap_hdr) == 0
- && (cap_hdr & 0xf8000000) == 0xa8000000 /* MSI mapping */) {
- printk(KERN_INFO "PCI: Found HT MSI mapping on %s with capability %s\n",
- pci_name(dev), cap_hdr & 0x10000 ? "enabled" : "disabled");
- return (cap_hdr & 0x10000) != 0; /* MSI mapping cap enabled */
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0)
+ {
+ printk(KERN_INFO "PCI: Found %s HT MSI Mapping on %s\n",
+ flags & HT_MSI_FLAGS_ENABLE ?
+ "enabled" : "disabled", pci_name(dev));
+ return (flags & HT_MSI_FLAGS_ENABLE) != 0;
}
+
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
}
return 0;
}
* a single one having MSI is enough to be sure that MSI are supported.
*/
pdev = pci_get_slot(dev->bus, 0);
- if (dev->subordinate && !msi_ht_cap_enabled(dev)
- && !msi_ht_cap_enabled(pdev)) {
+ if (!pdev)
+ return;
+ if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
printk(KERN_WARNING "PCI: MSI quirk detected. "
"MSI disabled on chipset %s.\n",
pci_name(dev));
struct pci_dev *dev;
WARN_ON(in_interrupt());
+
+ /*
+ * pci_find_subsys() can be called on the ide_setup() path, super-early
+ * in boot. But the down_read() will enable local interrupts, which
+ * can cause some machines to crash. So here we detect and flag that
+ * situation and bail out early.
+ */
+ if (unlikely(list_empty(&pci_devices))) {
+ printk(KERN_INFO "pci_find_subsys() called while pci_devices "
+ "is still empty\n");
+ return NULL;
+ }
down_read(&pci_bus_sem);
n = from ? from->global_list.next : pci_devices.next;
struct pci_dev *dev;
WARN_ON(in_interrupt());
+
+ /*
+ * pci_get_subsys() can potentially be called by drivers super-early
+ * in boot. But the down_read() will enable local interrupts, which
+ * can cause some machines to crash. So here we detect and flag that
+ * situation and bail out early.
+ */
+ if (unlikely(list_empty(&pci_devices))) {
+ printk(KERN_NOTICE "pci_get_subsys() called while pci_devices "
+ "is still empty\n");
+ return NULL;
+ }
down_read(&pci_bus_sem);
n = from ? from->global_list.next : pci_devices.next;
return dev;
}
+const struct pci_device_id *pci_find_present(const struct pci_device_id *ids)
+{
+ struct pci_dev *dev;
+ const struct pci_device_id *found = NULL;
+
+ WARN_ON(in_interrupt());
+ down_read(&pci_bus_sem);
+ while (ids->vendor || ids->subvendor || ids->class_mask) {
+ list_for_each_entry(dev, &pci_devices, global_list) {
+ if ((found = pci_match_one_device(ids, dev)) != NULL)
+ break;
+ }
+ ids++;
+ }
+ up_read(&pci_bus_sem);
+ return found;
+}
+
/**
* pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
* @ids: A pointer to a null terminated list of struct pci_device_id structures
*/
int pci_dev_present(const struct pci_device_id *ids)
{
- struct pci_dev *dev;
- int found = 0;
-
- WARN_ON(in_interrupt());
- down_read(&pci_bus_sem);
- while (ids->vendor || ids->subvendor || ids->class_mask) {
- list_for_each_entry(dev, &pci_devices, global_list) {
- if (pci_match_one_device(ids, dev)) {
- found = 1;
- goto exit;
- }
- }
- ids++;
- }
-exit:
- up_read(&pci_bus_sem);
- return found;
+ return pci_find_present(ids) == NULL ? 0 : 1;
}
+
EXPORT_SYMBOL(pci_dev_present);
+EXPORT_SYMBOL(pci_find_present);
EXPORT_SYMBOL(pci_find_device);
EXPORT_SYMBOL(pci_find_device_reverse);
* have a P2P bridge below a cardbus bridge, we need 4K.
*/
#define CARDBUS_IO_SIZE (256)
-#define CARDBUS_MEM_SIZE (32*1024*1024)
+#define CARDBUS_MEM_SIZE (64*1024*1024)
static void __devinit
pbus_assign_resources_sorted(struct pci_bus *bus)
u32 new, check, mask;
int reg;
- /* Ignore resources for unimplemented BARs and unused resource slots
- for 64 bit BARs. */
+ /*
+ * Ignore resources for unimplemented BARs and unused resource slots
+ * for 64 bit BARs.
+ */
if (!res->flags)
return;
+ /*
+ * Ignore non-moveable resources. This might be legacy resources for
+ * which no functional BAR register exists or another important
+ * system resource we should better not move around in system address
+ * space.
+ */
+ if (res->flags & IORESOURCE_PCI_FIXED)
+ return;
+
pcibios_resource_to_bus(dev, ®ion, res);
pr_debug(" got res [%llx:%llx] bus [%lx:%lx] flags %lx for "
resource_size_t r_align;
r = &dev->resource[i];
+
+ if (r->flags & IORESOURCE_PCI_FIXED)
+ continue;
+
r_align = r->end - r->start;
if (!(r->flags) || r->parent)
#include <asm/mach/time.h>
+#include <asm/arch/at91_rtc.h>
+
#define AT91_RTC_FREQ 1
#define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */
/*
- * An I2C driver for the Ricoh RS5C372 RTC
+ * An I2C driver for Ricoh RS5C372 and RV5C38[67] RTCs
*
* Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net>
* Copyright (C) 2006 Tower Technologies
#include <linux/rtc.h>
#include <linux/bcd.h>
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
/* Addresses to scan */
static unsigned short normal_i2c[] = { /* 0x32,*/ I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
+
+/*
+ * Ricoh has a family of I2C based RTCs, which differ only slightly from
+ * each other. Differences center on pinout (e.g. how many interrupts,
+ * output clock, etc) and how the control registers are used. The '372
+ * is significant only because that's the one this driver first supported.
+ */
#define RS5C372_REG_SECS 0
#define RS5C372_REG_MINS 1
#define RS5C372_REG_HOURS 2
#define RS5C372_REG_MONTH 5
#define RS5C372_REG_YEAR 6
#define RS5C372_REG_TRIM 7
+# define RS5C372_TRIM_XSL 0x80
+# define RS5C372_TRIM_MASK 0x7F
+
+#define RS5C_REG_ALARM_A_MIN 8 /* or ALARM_W */
+#define RS5C_REG_ALARM_A_HOURS 9
+#define RS5C_REG_ALARM_A_WDAY 10
+
+#define RS5C_REG_ALARM_B_MIN 11 /* or ALARM_D */
+#define RS5C_REG_ALARM_B_HOURS 12
+#define RS5C_REG_ALARM_B_WDAY 13 /* (ALARM_B only) */
+
+#define RS5C_REG_CTRL1 14
+# define RS5C_CTRL1_AALE (1 << 7) /* or WALE */
+# define RS5C_CTRL1_BALE (1 << 6) /* or DALE */
+# define RV5C387_CTRL1_24 (1 << 5)
+# define RS5C372A_CTRL1_SL1 (1 << 5)
+# define RS5C_CTRL1_CT_MASK (7 << 0)
+# define RS5C_CTRL1_CT0 (0 << 0) /* no periodic irq */
+# define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */
+#define RS5C_REG_CTRL2 15
+# define RS5C372_CTRL2_24 (1 << 5)
+# define RS5C_CTRL2_XSTP (1 << 4)
+# define RS5C_CTRL2_CTFG (1 << 2)
+# define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */
+# define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */
+
+
+/* to read (style 1) or write registers starting at R */
+#define RS5C_ADDR(R) (((R) << 4) | 0)
+
+
+enum rtc_type {
+ rtc_undef = 0,
+ rtc_rs5c372a,
+ rtc_rs5c372b,
+ rtc_rv5c386,
+ rtc_rv5c387a,
+};
-#define RS5C372_TRIM_XSL 0x80
-#define RS5C372_TRIM_MASK 0x7F
+/* REVISIT: this assumes that:
+ * - we're in the 21st century, so it's safe to ignore the century
+ * bit for rv5c38[67] (REG_MONTH bit 7);
+ * - we should use ALARM_A not ALARM_B (may be wrong on some boards)
+ */
+struct rs5c372 {
+ struct i2c_client *client;
+ struct rtc_device *rtc;
+ enum rtc_type type;
+ unsigned time24:1;
+ unsigned has_irq:1;
+ char buf[17];
+ char *regs;
+
+ /* on conversion to a "new style" i2c driver, this vanishes */
+ struct i2c_client dev;
+};
-#define RS5C372_REG_BASE 0
+static int rs5c_get_regs(struct rs5c372 *rs5c)
+{
+ struct i2c_client *client = rs5c->client;
+ struct i2c_msg msgs[] = {
+ { client->addr, I2C_M_RD, sizeof rs5c->buf, rs5c->buf },
+ };
+
+ /* This implements the third reading method from the datasheet, using
+ * an internal address that's reset after each transaction (by STOP)
+ * to 0x0f ... so we read extra registers, and skip the first one.
+ *
+ * The first method doesn't work with the iop3xx adapter driver, on at
+ * least 80219 chips; this works around that bug.
+ */
+ if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
+ pr_debug("%s: can't read registers\n", rs5c->rtc->name);
+ return -EIO;
+ }
-static int rs5c372_attach(struct i2c_adapter *adapter);
-static int rs5c372_detach(struct i2c_client *client);
-static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind);
+ dev_dbg(&client->dev,
+ "%02x %02x %02x (%02x) %02x %02x %02x (%02x), "
+ "%02x %02x %02x, %02x %02x %02x; %02x %02x\n",
+ rs5c->regs[0], rs5c->regs[1], rs5c->regs[2], rs5c->regs[3],
+ rs5c->regs[4], rs5c->regs[5], rs5c->regs[6], rs5c->regs[7],
+ rs5c->regs[8], rs5c->regs[9], rs5c->regs[10], rs5c->regs[11],
+ rs5c->regs[12], rs5c->regs[13], rs5c->regs[14], rs5c->regs[15]);
-struct rs5c372 {
- u8 reg_addr;
- u8 regs[17];
- struct i2c_msg msg[1];
- struct i2c_client client;
- struct rtc_device *rtc;
-};
+ return 0;
+}
-static struct i2c_driver rs5c372_driver = {
- .driver = {
- .name = "rs5c372",
- },
- .attach_adapter = &rs5c372_attach,
- .detach_client = &rs5c372_detach,
-};
+static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg)
+{
+ unsigned hour;
-static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+ if (rs5c->time24)
+ return BCD2BIN(reg & 0x3f);
+
+ hour = BCD2BIN(reg & 0x1f);
+ if (hour == 12)
+ hour = 0;
+ if (reg & 0x20)
+ hour += 12;
+ return hour;
+}
+
+static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour)
{
+ if (rs5c->time24)
+ return BIN2BCD(hour);
+
+ if (hour > 12)
+ return 0x20 | BIN2BCD(hour - 12);
+ if (hour == 12)
+ return 0x20 | BIN2BCD(12);
+ if (hour == 0)
+ return BIN2BCD(12);
+ return BIN2BCD(hour);
+}
- struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
- u8 *buf = &(rs5c372->regs[1]);
+static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ int status = rs5c_get_regs(rs5c);
- /* this implements the 3rd reading method, according
- * to the datasheet. rs5c372 defaults to internal
- * address 0xF, so 0x0 is in regs[1]
- */
+ if (status < 0)
+ return status;
- if ((i2c_transfer(client->adapter, rs5c372->msg, 1)) != 1) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
+ tm->tm_sec = BCD2BIN(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
+ tm->tm_min = BCD2BIN(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
+ tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
- tm->tm_sec = BCD2BIN(buf[RS5C372_REG_SECS] & 0x7f);
- tm->tm_min = BCD2BIN(buf[RS5C372_REG_MINS] & 0x7f);
- tm->tm_hour = BCD2BIN(buf[RS5C372_REG_HOURS] & 0x3f);
- tm->tm_wday = BCD2BIN(buf[RS5C372_REG_WDAY] & 0x07);
- tm->tm_mday = BCD2BIN(buf[RS5C372_REG_DAY] & 0x3f);
+ tm->tm_wday = BCD2BIN(rs5c->regs[RS5C372_REG_WDAY] & 0x07);
+ tm->tm_mday = BCD2BIN(rs5c->regs[RS5C372_REG_DAY] & 0x3f);
/* tm->tm_mon is zero-based */
- tm->tm_mon = BCD2BIN(buf[RS5C372_REG_MONTH] & 0x1f) - 1;
+ tm->tm_mon = BCD2BIN(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1;
/* year is 1900 + tm->tm_year */
- tm->tm_year = BCD2BIN(buf[RS5C372_REG_YEAR]) + 100;
+ tm->tm_year = BCD2BIN(rs5c->regs[RS5C372_REG_YEAR]) + 100;
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- return 0;
+ /* rtc might need initialization */
+ return rtc_valid_tm(tm);
}
static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
- unsigned char buf[8] = { RS5C372_REG_BASE };
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ unsigned char buf[8];
- dev_dbg(&client->dev,
- "%s: secs=%d, mins=%d, hours=%d "
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
"mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__, tm->tm_sec, tm->tm_min, tm->tm_hour,
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+ buf[0] = RS5C_ADDR(RS5C372_REG_SECS);
buf[1] = BIN2BCD(tm->tm_sec);
buf[2] = BIN2BCD(tm->tm_min);
- buf[3] = BIN2BCD(tm->tm_hour);
+ buf[3] = rs5c_hr2reg(rs5c, tm->tm_hour);
buf[4] = BIN2BCD(tm->tm_wday);
buf[5] = BIN2BCD(tm->tm_mday);
buf[6] = BIN2BCD(tm->tm_mon + 1);
return 0;
}
+#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
+#define NEED_TRIM
+#endif
+
+#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
+#define NEED_TRIM
+#endif
+
+#ifdef NEED_TRIM
static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim)
{
struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
- u8 tmp = rs5c372->regs[RS5C372_REG_TRIM + 1];
+ u8 tmp = rs5c372->regs[RS5C372_REG_TRIM];
if (osc)
*osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768;
if (trim) {
- *trim = tmp & RS5C372_TRIM_MASK;
- dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, *trim);
+ dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, tmp);
+ tmp &= RS5C372_TRIM_MASK;
+ if (tmp & 0x3e) {
+ int t = tmp & 0x3f;
+
+ if (tmp & 0x40)
+ t = (~t | (s8)0xc0) + 1;
+ else
+ t = t - 1;
+
+ tmp = t * 2;
+ } else
+ tmp = 0;
+ *trim = tmp;
}
return 0;
}
+#endif
static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
return rs5c372_set_datetime(to_i2c_client(dev), tm);
}
+#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
+
+static int
+rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ unsigned char buf[2];
+ int status;
+
+ buf[1] = rs5c->regs[RS5C_REG_CTRL1];
+ switch (cmd) {
+ case RTC_UIE_OFF:
+ case RTC_UIE_ON:
+ /* some 327a modes use a different IRQ pin for 1Hz irqs */
+ if (rs5c->type == rtc_rs5c372a
+ && (buf[1] & RS5C372A_CTRL1_SL1))
+ return -ENOIOCTLCMD;
+ case RTC_AIE_OFF:
+ case RTC_AIE_ON:
+ /* these irq management calls only make sense for chips
+ * which are wired up to an IRQ.
+ */
+ if (!rs5c->has_irq)
+ return -ENOIOCTLCMD;
+ break;
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ status = rs5c_get_regs(rs5c);
+ if (status < 0)
+ return status;
+
+ buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
+ switch (cmd) {
+ case RTC_AIE_OFF: /* alarm off */
+ buf[1] &= ~RS5C_CTRL1_AALE;
+ break;
+ case RTC_AIE_ON: /* alarm on */
+ buf[1] |= RS5C_CTRL1_AALE;
+ break;
+ case RTC_UIE_OFF: /* update off */
+ buf[1] &= ~RS5C_CTRL1_CT_MASK;
+ break;
+ case RTC_UIE_ON: /* update on */
+ buf[1] &= ~RS5C_CTRL1_CT_MASK;
+ buf[1] |= RS5C_CTRL1_CT4;
+ break;
+ }
+ if ((i2c_master_send(client, buf, 2)) != 2) {
+ printk(KERN_WARNING "%s: can't update alarm\n",
+ rs5c->rtc->name);
+ status = -EIO;
+ } else
+ rs5c->regs[RS5C_REG_CTRL1] = buf[1];
+ return status;
+}
+
+#else
+#define rs5c_rtc_ioctl NULL
+#endif
+
+
+/* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI,
+ * which only exposes a polled programming interface; and since
+ * these calls map directly to those EFI requests; we don't demand
+ * we have an IRQ for this chip when we go through this API.
+ *
+ * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs
+ * though, managed through RTC_AIE_{ON,OFF} requests.
+ */
+
+static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ int status;
+
+ status = rs5c_get_regs(rs5c);
+ if (status < 0)
+ return status;
+
+ /* report alarm time */
+ t->time.tm_sec = 0;
+ t->time.tm_min = BCD2BIN(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
+ t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
+ t->time.tm_mday = -1;
+ t->time.tm_mon = -1;
+ t->time.tm_year = -1;
+ t->time.tm_wday = -1;
+ t->time.tm_yday = -1;
+ t->time.tm_isdst = -1;
+
+ /* ... and status */
+ t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
+ t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG);
+
+ return 0;
+}
+
+static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ int status;
+ unsigned char buf[4];
+
+ /* only handle up to 24 hours in the future, like RTC_ALM_SET */
+ if (t->time.tm_mday != -1
+ || t->time.tm_mon != -1
+ || t->time.tm_year != -1)
+ return -EINVAL;
+
+ /* REVISIT: round up tm_sec */
+
+ /* if needed, disable irq (clears pending status) */
+ status = rs5c_get_regs(rs5c);
+ if (status < 0)
+ return status;
+ if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
+ buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
+ buf[1] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
+ if (i2c_master_send(client, buf, 2) != 2) {
+ pr_debug("%s: can't disable alarm\n", rs5c->rtc->name);
+ return -EIO;
+ }
+ rs5c->regs[RS5C_REG_CTRL1] = buf[1];
+ }
+
+ /* set alarm */
+ buf[0] = RS5C_ADDR(RS5C_REG_ALARM_A_MIN);
+ buf[1] = BIN2BCD(t->time.tm_min);
+ buf[2] = rs5c_hr2reg(rs5c, t->time.tm_hour);
+ buf[3] = 0x7f; /* any/all days */
+ if ((i2c_master_send(client, buf, 4)) != 4) {
+ pr_debug("%s: can't set alarm time\n", rs5c->rtc->name);
+ return -EIO;
+ }
+
+ /* ... and maybe enable its irq */
+ if (t->enabled) {
+ buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
+ buf[1] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
+ if ((i2c_master_send(client, buf, 2)) != 2)
+ printk(KERN_WARNING "%s: can't enable alarm\n",
+ rs5c->rtc->name);
+ rs5c->regs[RS5C_REG_CTRL1] = buf[1];
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
+
static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
{
int err, osc, trim;
err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
if (err == 0) {
- seq_printf(seq, "%d.%03d KHz\n", osc / 1000, osc % 1000);
- seq_printf(seq, "trim\t: %d\n", trim);
+ seq_printf(seq, "crystal\t\t: %d.%03d KHz\n",
+ osc / 1000, osc % 1000);
+ seq_printf(seq, "trim\t\t: %d\n", trim);
}
return 0;
}
+#else
+#define rs5c372_rtc_proc NULL
+#endif
+
static const struct rtc_class_ops rs5c372_rtc_ops = {
.proc = rs5c372_rtc_proc,
+ .ioctl = rs5c_rtc_ioctl,
.read_time = rs5c372_rtc_read_time,
.set_time = rs5c372_rtc_set_time,
+ .read_alarm = rs5c_read_alarm,
+ .set_alarm = rs5c_set_alarm,
};
+#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
+
static ssize_t rs5c372_sysfs_show_trim(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (err)
return err;
- return sprintf(buf, "0x%2x\n", trim);
+ return sprintf(buf, "%d\n", trim);
}
static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL);
}
static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL);
-static int rs5c372_attach(struct i2c_adapter *adapter)
+static int rs5c_sysfs_register(struct device *dev)
{
- return i2c_probe(adapter, &addr_data, rs5c372_probe);
+ int err;
+
+ err = device_create_file(dev, &dev_attr_trim);
+ if (err)
+ return err;
+ err = device_create_file(dev, &dev_attr_osc);
+ if (err)
+ device_remove_file(dev, &dev_attr_trim);
+
+ return err;
+}
+
+#else
+static int rs5c_sysfs_register(struct device *dev)
+{
+ return 0;
}
+#endif /* SYSFS */
+
+static struct i2c_driver rs5c372_driver;
static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind)
{
int err = 0;
struct i2c_client *client;
struct rs5c372 *rs5c372;
+ struct rtc_time tm;
dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
err = -ENOMEM;
goto exit;
}
- client = &rs5c372->client;
+
+ /* we read registers 0x0f then 0x00-0x0f; skip the first one */
+ rs5c372->regs=&rs5c372->buf[1];
+
+ /* On conversion to a "new style" i2c driver, we'll be handed
+ * the i2c_client (we won't create it)
+ */
+ client = &rs5c372->dev;
+ rs5c372->client = client;
/* I2C client */
client->addr = address;
i2c_set_clientdata(client, rs5c372);
- rs5c372->msg[0].addr = address;
- rs5c372->msg[0].flags = I2C_M_RD;
- rs5c372->msg[0].len = sizeof(rs5c372->regs);
- rs5c372->msg[0].buf = rs5c372->regs;
-
/* Inform the i2c layer */
if ((err = i2c_attach_client(client)))
goto exit_kfree;
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+ err = rs5c_get_regs(rs5c372);
+ if (err < 0)
+ goto exit_detach;
+
+ /* For "new style" drivers, irq is in i2c_client and chip type
+ * info comes from i2c_client.dev.platform_data. Meanwhile:
+ *
+ * STICK BOARD-SPECIFIC SETUP CODE RIGHT HERE
+ */
+ if (rs5c372->type == rtc_undef) {
+ rs5c372->type = rtc_rs5c372b;
+ dev_warn(&client->dev, "assuming rs5c372b\n");
+ }
+
+ /* clock may be set for am/pm or 24 hr time */
+ switch (rs5c372->type) {
+ case rtc_rs5c372a:
+ case rtc_rs5c372b:
+ /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
+ * so does periodic irq, except some 327a modes.
+ */
+ if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
+ rs5c372->time24 = 1;
+ break;
+ case rtc_rv5c386:
+ case rtc_rv5c387a:
+ if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
+ rs5c372->time24 = 1;
+ /* alarm uses ALARM_W; and nINTRB for alarm and periodic
+ * irq, on both 386 and 387
+ */
+ break;
+ default:
+ dev_err(&client->dev, "unknown RTC type\n");
+ goto exit_detach;
+ }
+
+ /* if the oscillator lost power and no other software (like
+ * the bootloader) set it up, do it here.
+ */
+ if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP) {
+ unsigned char buf[3];
+
+ rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
+
+ buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
+ buf[1] = rs5c372->regs[RS5C_REG_CTRL1];
+ buf[2] = rs5c372->regs[RS5C_REG_CTRL2];
+
+ /* use 24hr mode */
+ switch (rs5c372->type) {
+ case rtc_rs5c372a:
+ case rtc_rs5c372b:
+ buf[2] |= RS5C372_CTRL2_24;
+ rs5c372->time24 = 1;
+ break;
+ case rtc_rv5c386:
+ case rtc_rv5c387a:
+ buf[1] |= RV5C387_CTRL1_24;
+ rs5c372->time24 = 1;
+ break;
+ default:
+ /* impossible */
+ break;
+ }
+
+ if ((i2c_master_send(client, buf, 3)) != 3) {
+ dev_err(&client->dev, "setup error\n");
+ goto exit_detach;
+ }
+ rs5c372->regs[RS5C_REG_CTRL1] = buf[1];
+ rs5c372->regs[RS5C_REG_CTRL2] = buf[2];
+ }
+
+ if (rs5c372_get_datetime(client, &tm) < 0)
+ dev_warn(&client->dev, "clock needs to be set\n");
+
+ dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n",
+ ({ char *s; switch (rs5c372->type) {
+ case rtc_rs5c372a: s = "rs5c372a"; break;
+ case rtc_rs5c372b: s = "rs5c372b"; break;
+ case rtc_rv5c386: s = "rv5c386"; break;
+ case rtc_rv5c387a: s = "rv5c387a"; break;
+ default: s = "chip"; break;
+ }; s;}),
+ rs5c372->time24 ? "24hr" : "am/pm"
+ );
+
+ /* FIXME when client->irq exists, use it to register alarm irq */
rs5c372->rtc = rtc_device_register(rs5c372_driver.driver.name,
&client->dev, &rs5c372_rtc_ops, THIS_MODULE);
goto exit_detach;
}
- err = device_create_file(&client->dev, &dev_attr_trim);
+ err = rs5c_sysfs_register(&client->dev);
if (err)
goto exit_devreg;
- err = device_create_file(&client->dev, &dev_attr_osc);
- if (err)
- goto exit_trim;
return 0;
-exit_trim:
- device_remove_file(&client->dev, &dev_attr_trim);
-
exit_devreg:
rtc_device_unregister(rs5c372->rtc);
return err;
}
+static int rs5c372_attach(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, rs5c372_probe);
+}
+
static int rs5c372_detach(struct i2c_client *client)
{
int err;
if (rs5c372->rtc)
rtc_device_unregister(rs5c372->rtc);
+ /* REVISIT properly destroy the sysfs files ... */
+
if ((err = i2c_detach_client(client)))
return err;
return 0;
}
+static struct i2c_driver rs5c372_driver = {
+ .driver = {
+ .name = "rtc-rs5c372",
+ },
+ .attach_adapter = &rs5c372_attach,
+ .detach_client = &rs5c372_detach,
+};
+
static __init int rs5c372_init(void)
{
return i2c_add_driver(&rs5c372_driver);
unsigned int tmp;
tmp = readb(rtc->regbase + RCR1);
- seq_printf(seq, "alarm_IRQ\t: %s\n",
- (tmp & RCR1_AIE) ? "yes" : "no");
seq_printf(seq, "carry_IRQ\t: %s\n",
(tmp & RCR1_CIE) ? "yes" : "no");
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
tm->tm_year = 0xffff;
+ wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
+
spin_unlock_irq(&rtc->lock);
return 0;
spin_lock_irq(&rtc->lock);
- /* disable alarm interrupt and clear flag */
+ /* disable alarm interrupt and clear the alarm flag */
rcr1 = readb(rtc->regbase + RCR1);
- rcr1 &= ~RCR1_AF;
- writeb(rcr1 & ~RCR1_AIE, rtc->regbase + RCR1);
+ rcr1 &= ~(RCR1_AF|RCR1_AIE);
+ writeb(rcr1, rtc->regbase + RCR1);
rtc->rearm_aie = 0;
mon += 1;
sh_rtc_write_alarm_value(rtc, mon, RMONAR);
- /* Restore interrupt activation status */
- writeb(rcr1, rtc->regbase + RCR1);
+ if (wkalrm->enabled) {
+ rcr1 |= RCR1_AIE;
+ writeb(rcr1, rtc->regbase + RCR1);
+ }
spin_unlock_irq(&rtc->lock);
.attrs = rtc_attrs,
};
-static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
+static int rtc_sysfs_add_device(struct class_device *class_dev,
struct class_interface *class_intf)
{
int err;
#include <asm/appldata.h>
#include <asm/monwriter.h>
-#define MONWRITE_MAX_DATALEN 4024
+#define MONWRITE_MAX_DATALEN 4010
static int mon_max_bufs = 255;
static int mon_buf_count;
return -ENOMEM;
}
debug_text_event(vmcp_debug, 1, cmd);
- session->resp_size = __cpcmd(cmd, session->response,
+ session->resp_size = cpcmd(cmd, session->response,
session->bufsize,
&session->resp_code);
up(&session->mutex);
* drivers/s390/cio/cio.c
* S/390 common I/O routines -- low level i/o calls
*
- * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
- * IBM Corporation
+ * Copyright (C) IBM Corp. 1999,2006
* Author(s): Ingo Adlung (adlung@de.ibm.com)
* Cornelia Huck (cornelia.huck@de.ibm.com)
* Arnd Bergmann (arndb@de.ibm.com)
s390_reset_pgm_handler = cio_reset_pgm_check_handler;
rc = stsch(schid, addr);
s390_reset_pgm_handler = NULL;
+
+ /* The program check handler could have changed pgm_check_occured */
+ barrier();
+
if (pgm_check_occured)
return -EIO;
else
help
Select this option if you want to use inter-user communication
under VM or VIF. If unsure, say "Y" to enable a fast communication
- link between VM guests. At boot time the user ID of the guest needs
- to be passed to the kernel. Note that both kernels need to be
- compiled with this option and both need to be booted with the user ID
- of the other VM guest.
+ link between VM guests.
config NETIUCV
tristate "IUCV network device support (VM only)"
int (*callback)(struct qeth_card *,struct qeth_reply *,unsigned long);
u32 seqno;
unsigned long offset;
- int received;
+ atomic_t received;
int rc;
void *param;
struct qeth_card *card;
channel->state == CH_STATE_UP)
qeth_issue_next_read(card);
- tasklet_schedule(&channel->irq_tasklet);
+ qeth_irq_tasklet((unsigned long)channel);
return;
out:
wake_up(&card->wait_q);
return rc;
}
-static int
-qeth_register_ip_addresses(void *ptr)
-{
- struct qeth_card *card;
-
- card = (struct qeth_card *) ptr;
- daemonize("qeth_reg_ip");
- QETH_DBF_TEXT(trace,4,"regipth1");
- if (!qeth_do_run_thread(card, QETH_SET_IP_THREAD))
- return 0;
- QETH_DBF_TEXT(trace,4,"regipth2");
- qeth_set_ip_addr_list(card);
- qeth_clear_thread_running_bit(card, QETH_SET_IP_THREAD);
- return 0;
-}
-
-/*
- * Drive the SET_PROMISC_MODE thread
- */
-static int
-qeth_set_promisc_mode(void *ptr)
-{
- struct qeth_card *card = (struct qeth_card *) ptr;
-
- daemonize("qeth_setprm");
- QETH_DBF_TEXT(trace,4,"setprm1");
- if (!qeth_do_run_thread(card, QETH_SET_PROMISC_MODE_THREAD))
- return 0;
- QETH_DBF_TEXT(trace,4,"setprm2");
- qeth_setadp_promisc_mode(card);
- qeth_clear_thread_running_bit(card, QETH_SET_PROMISC_MODE_THREAD);
- return 0;
-}
-
static int
qeth_recover(void *ptr)
{
if (card->read.state != CH_STATE_UP &&
card->write.state != CH_STATE_UP)
return;
-
- if (qeth_do_start_thread(card, QETH_SET_IP_THREAD))
- kernel_thread(qeth_register_ip_addresses, (void *)card,SIGCHLD);
- if (qeth_do_start_thread(card, QETH_SET_PROMISC_MODE_THREAD))
- kernel_thread(qeth_set_promisc_mode, (void *)card, SIGCHLD);
if (qeth_do_start_thread(card, QETH_RECOVER_THREAD))
kernel_thread(qeth_recover, (void *) card, SIGCHLD);
}
card->options.layer2 = 1;
else
card->options.layer2 = 0;
- card->options.performance_stats = 1;
+ card->options.performance_stats = 0;
}
/**
return -ENOMEM;
}
qeth_setup_ccw(&card->read, iob->data, QETH_BUFSIZE);
- wait_event(card->wait_q,
- atomic_cmpxchg(&card->read.irq_pending, 0, 1) == 0);
QETH_DBF_TEXT(trace, 6, "noirqpnd");
rc = ccw_device_start(card->read.ccwdev, &card->read.ccw,
(addr_t) iob, 0, 0);
reply = kzalloc(sizeof(struct qeth_reply), GFP_ATOMIC);
if (reply){
atomic_set(&reply->refcnt, 1);
+ atomic_set(&reply->received, 0);
reply->card = card;
};
return reply;
kfree(reply);
}
-static void
-qeth_cmd_timeout(unsigned long data)
-{
- struct qeth_reply *reply, *list_reply, *r;
- unsigned long flags;
-
- reply = (struct qeth_reply *) data;
- spin_lock_irqsave(&reply->card->lock, flags);
- list_for_each_entry_safe(list_reply, r,
- &reply->card->cmd_waiter_list, list) {
- if (reply == list_reply){
- qeth_get_reply(reply);
- list_del_init(&reply->list);
- spin_unlock_irqrestore(&reply->card->lock, flags);
- reply->rc = -ETIME;
- reply->received = 1;
- wake_up(&reply->wait_q);
- qeth_put_reply(reply);
- return;
- }
- }
- spin_unlock_irqrestore(&reply->card->lock, flags);
-}
-
-
static struct qeth_ipa_cmd *
qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob)
{
list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) {
qeth_get_reply(reply);
reply->rc = -EIO;
- reply->received = 1;
+ atomic_inc(&reply->received);
list_del_init(&reply->list);
wake_up(&reply->wait_q);
qeth_put_reply(reply);
&card->cmd_waiter_list);
spin_unlock_irqrestore(&card->lock, flags);
} else {
- reply->received = 1;
+ atomic_inc(&reply->received);
wake_up(&reply->wait_q);
}
qeth_put_reply(reply);
int rc;
unsigned long flags;
struct qeth_reply *reply = NULL;
- struct timer_list timer;
+ unsigned long timeout;
QETH_DBF_TEXT(trace, 2, "sendctl");
reply->seqno = QETH_IDX_COMMAND_SEQNO;
else
reply->seqno = card->seqno.ipa++;
- init_timer(&timer);
- timer.function = qeth_cmd_timeout;
- timer.data = (unsigned long) reply;
init_waitqueue_head(&reply->wait_q);
spin_lock_irqsave(&card->lock, flags);
list_add_tail(&reply->list, &card->cmd_waiter_list);
spin_unlock_irqrestore(&card->lock, flags);
QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
- wait_event(card->wait_q,
- atomic_cmpxchg(&card->write.irq_pending, 0, 1) == 0);
+
+ while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
qeth_prepare_control_data(card, len, iob);
+
if (IS_IPA(iob->data))
- timer.expires = jiffies + QETH_IPA_TIMEOUT;
+ timeout = jiffies + QETH_IPA_TIMEOUT;
else
- timer.expires = jiffies + QETH_TIMEOUT;
+ timeout = jiffies + QETH_TIMEOUT;
+
QETH_DBF_TEXT(trace, 6, "noirqpnd");
spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags);
rc = ccw_device_start(card->write.ccwdev, &card->write.ccw,
wake_up(&card->wait_q);
return rc;
}
- add_timer(&timer);
- wait_event(reply->wait_q, reply->received);
- del_timer_sync(&timer);
+ while (!atomic_read(&reply->received)) {
+ if (time_after(jiffies, timeout)) {
+ spin_lock_irqsave(&reply->card->lock, flags);
+ list_del_init(&reply->list);
+ spin_unlock_irqrestore(&reply->card->lock, flags);
+ reply->rc = -ETIME;
+ atomic_inc(&reply->received);
+ wake_up(&reply->wait_q);
+ }
+ };
rc = reply->rc;
qeth_put_reply(reply);
return rc;
qeth_rebuild_skb_fake_ll_eth(card, skb, hdr);
}
-static inline __u16
+static inline void
qeth_layer2_rebuild_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
- unsigned short vlan_id = 0;
-#ifdef CONFIG_QETH_VLAN
- struct vlan_hdr *vhdr;
-#endif
-
skb->pkt_type = PACKET_HOST;
skb->protocol = qeth_type_trans(skb, skb->dev);
if (card->options.checksum_type == NO_CHECKSUMMING)
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
-#ifdef CONFIG_QETH_VLAN
- if (hdr->hdr.l2.flags[2] & (QETH_LAYER2_FLAG_VLAN)) {
- vhdr = (struct vlan_hdr *) skb->data;
- skb->protocol =
- __constant_htons(vhdr->h_vlan_encapsulated_proto);
- vlan_id = hdr->hdr.l2.vlan_id;
- skb_pull(skb, VLAN_HLEN);
- }
-#endif
*((__u32 *)skb->cb) = ++card->seqno.pkt_seqno;
- return vlan_id;
}
static inline __u16
int offset;
int rxrc;
__u16 vlan_tag = 0;
- __u16 *vlan_addr;
/* get first element of current buffer */
element = (struct qdio_buffer_element *)&buf->buffer->element[0];
&offset, &hdr))) {
skb->dev = card->dev;
if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
- vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
+ qeth_layer2_rebuild_skb(card, skb, hdr);
else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
vlan_tag = qeth_rebuild_skb(card, skb, hdr);
else { /*in case of OSN*/
qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr **hdr, int ipv)
{
- struct sk_buff *new_skb;
+ struct sk_buff *new_skb, *new_skb2;
QETH_DBF_TEXT(trace, 6, "prepskb");
-
- new_skb = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
- if (new_skb == NULL)
+ new_skb = skb;
+ new_skb = qeth_pskb_unshare(skb, GFP_ATOMIC);
+ if (!new_skb)
+ return NULL;
+ new_skb2 = qeth_realloc_headroom(card, new_skb,
+ sizeof(struct qeth_hdr));
+ if (!new_skb2) {
+ __qeth_free_new_skb(skb, new_skb);
return NULL;
+ }
+ if (new_skb != skb)
+ __qeth_free_new_skb(new_skb2, new_skb);
+ new_skb = new_skb2;
*hdr = __qeth_prepare_skb(card, new_skb, ipv);
if (*hdr == NULL) {
__qeth_free_new_skb(skb, new_skb);
"(0x%x/%d)\n",
QETH_CARD_IFNAME(card), qeth_arp_get_error_cause(&rc),
tmp, tmp);
- copy_to_user(udata, qinfo.udata, 4);
+ if (copy_to_user(udata, qinfo.udata, 4))
+ rc = -EFAULT;
} else {
- copy_to_user(udata, qinfo.udata, qinfo.udata_len);
+ if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
+ rc = -EFAULT;
}
kfree(qinfo.udata);
return rc;
if (rc)
PRINT_WARN("SNMP command failed on %s: (0x%x)\n",
QETH_CARD_IFNAME(card), rc);
- else
- copy_to_user(udata, qinfo.udata, qinfo.udata_len);
+ else {
+ if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
+ rc = -EFAULT;
+ }
kfree(ureq);
kfree(qinfo.udata);
qeth_add_multicast_ipv6(card);
#endif
out:
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
return;
- if (qeth_set_thread_start_bit(card, QETH_SET_PROMISC_MODE_THREAD)==0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_setadp_promisc_mode(card);
}
static int
.set_tso = qeth_ethtool_set_tso,
};
+static int
+qeth_hard_header_parse(struct sk_buff *skb, unsigned char *haddr)
+{
+ struct qeth_card *card;
+ struct ethhdr *eth;
+
+ card = qeth_get_card_from_dev(skb->dev);
+ if (card->options.layer2)
+ goto haveheader;
+#ifdef CONFIG_QETH_IPV6
+ /* cause of the manipulated arp constructor and the ARP
+ flag for OSAE devices we have some nasty exceptions */
+ if (card->info.type == QETH_CARD_TYPE_OSAE) {
+ if (!card->options.fake_ll) {
+ if ((skb->pkt_type==PACKET_OUTGOING) &&
+ (skb->protocol==ETH_P_IPV6))
+ goto haveheader;
+ else
+ return 0;
+ } else {
+ if ((skb->pkt_type==PACKET_OUTGOING) &&
+ (skb->protocol==ETH_P_IP))
+ return 0;
+ else
+ goto haveheader;
+ }
+ }
+#endif
+ if (!card->options.fake_ll)
+ return 0;
+haveheader:
+ eth = eth_hdr(skb);
+ memcpy(haddr, eth->h_source, ETH_ALEN);
+ return ETH_ALEN;
+}
+
static int
qeth_netdev_init(struct net_device *dev)
{
if (card->options.fake_ll &&
(qeth_get_netdev_flags(card) & IFF_NOARP))
dev->hard_header = qeth_fake_header;
- dev->hard_header_parse = NULL;
+ if (dev->type == ARPHRD_IEEE802_TR)
+ dev->hard_header_parse = NULL;
+ else
+ dev->hard_header_parse = qeth_hard_header_parse;
dev->set_mac_address = qeth_layer2_set_mac_address;
dev->flags |= qeth_get_netdev_flags(card);
if ((card->options.fake_broadcast) ||
}
if (!qeth_add_ip(card, ipaddr))
kfree(ipaddr);
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
return rc;
}
return;
if (!qeth_delete_ip(card, ipaddr))
kfree(ipaddr);
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
}
/*
}
if (!qeth_add_ip(card, ipaddr))
kfree(ipaddr);
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
return 0;
}
return;
if (!qeth_delete_ip(card, ipaddr))
kfree(ipaddr);
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
}
/**
default:
break;
}
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
out:
return NOTIFY_DONE;
}
default:
break;
}
- if (qeth_set_thread_start_bit(card, QETH_SET_IP_THREAD) == 0)
- schedule_work(&card->kernel_thread_starter);
+ qeth_set_ip_addr_list(card);
out:
return NOTIFY_DONE;
}
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2005 3ware Inc.
+ Copyright (C) 1999-2007 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
before shutting down card.
Change to new 'change_queue_depth' api.
Fix 'handled=1' ISR usage, remove bogus IRQ check.
+ 1.26.02.002 - Free irq handler in __tw_shutdown().
+ Turn on RCD bit for caching mode page.
+ Serialize reset code.
*/
#include <linux/module.h>
#include "3w-xxxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "1.26.02.001"
+#define TW_DRIVER_VERSION "1.26.02.002"
static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
static int tw_device_extension_count = 0;
static int twe_major = -1;
MODULE_VERSION(TW_DRIVER_VERSION);
/* Function prototypes */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
/* Functions */
/* Now wait for the command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
- /* See if we reset while waiting for the ioctl to complete */
- if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- retval = -ERESTARTSYS;
- goto out2;
- }
-
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
retval = -EIO;
- spin_lock_irqsave(tw_dev->host->host_lock, flags);
- tw_dev->state[request_id] = TW_S_COMPLETED;
- tw_state_request_finish(tw_dev, request_id);
- tw_dev->posted_request_count--;
- spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
- if (tw_reset_device_extension(tw_dev, 1)) {
+ if (tw_reset_device_extension(tw_dev)) {
printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
}
goto out2;
} /* End tw_unmap_scsi_data() */
/* This function will reset a device extension */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset)
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
{
int i = 0;
struct scsi_cmnd *srb;
printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
return 1;
}
- TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
- /* Wake up any ioctl that was pending before the reset */
- if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- } else {
- tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- wake_up(&tw_dev->ioctl_wqueue);
- }
+ TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+ clear_bit(TW_IN_RESET, &tw_dev->flags);
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
return 0;
} /* End tw_reset_device_extension() */
"WARNING: Command (0x%x) timed out, resetting card.\n",
SCpnt->cmnd[0]);
+ /* Make sure we are not issuing an ioctl or resetting from ioctl */
+ mutex_lock(&tw_dev->ioctl_lock);
+
/* Now reset the card and some of the device extension data */
- if (tw_reset_device_extension(tw_dev, 0)) {
+ if (tw_reset_device_extension(tw_dev)) {
printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
goto out;
}
retval = SUCCESS;
out:
+ mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End tw_scsi_eh_reset() */
request_buffer[4] = 0x8; /* caching page */
request_buffer[5] = 0xa; /* page length */
if (*flags & 0x1)
- request_buffer[6] = 0x4; /* WCE on */
+ request_buffer[6] = 0x5; /* WCE on, RCD on */
else
- request_buffer[6] = 0x0; /* WCE off */
+ request_buffer[6] = 0x1; /* WCE off, RCD on */
tw_transfer_internal(tw_dev, request_id, request_buffer,
sizeof(request_buffer));
int retval = 1;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ /* If we are resetting due to timed out ioctl, report as busy */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
/* Save done function into Scsi_Cmnd struct */
SCpnt->scsi_done = done;
handled = 1;
+ /* If we are resetting, bail */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags))
+ goto tw_interrupt_bail;
+
/* Check controller for errors */
if (tw_check_bits(status_reg_value)) {
dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
/* Disable interrupts */
TW_DISABLE_INTERRUPTS(tw_dev);
+ /* Free up the IRQ */
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
twe_major = -1;
}
- /* Free up the IRQ */
- free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
/* Shutdown the card */
__tw_shutdown(tw_dev);
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2005 3ware Inc.
+ Copyright (C) 1999-2007 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI && BROKEN
+ depends on X86 && ISA && SCSI
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
- { 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024R0 (Lancer) */
- { 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014R0 (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */
{ 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
{ 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
{ 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */
{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */
{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */
- { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005SAS */
+ { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */
{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */
{ 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */
{ 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */
{ 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */
- { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000SAS (BlackBird) */
+ { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */
{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */
{ 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */
- { 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800SAS (Hurricane44) */
+ { 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */
{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/
{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */
- { aac_rkt_init, "aacraid", "ICP ", "ICP9024R0 ", 2 }, /* ICP9024R0 (Lancer) */
- { aac_rkt_init, "aacraid", "ICP ", "ICP9014R0 ", 1 }, /* ICP9014R0 (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9024RO ", 2 }, /* ICP9024RO (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9014RO ", 1 }, /* ICP9014RO (Lancer) */
{ aac_rkt_init, "aacraid", "ICP ", "ICP9047MA ", 1 }, /* ICP9047MA (Lancer) */
{ aac_rkt_init, "aacraid", "ICP ", "ICP9087MA ", 1 }, /* ICP9087MA (Lancer) */
{ aac_rkt_init, "aacraid", "ICP ", "ICP5445AU ", 1 }, /* ICP5445AU (Hurricane44) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */
- { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005SAS ", 1 }, /* ASR-4005SAS */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005 ", 1 }, /* ASR-4005 */
{ aac_rx_init, "ServeRAID","IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
{ aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */
{ aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */
- { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000SAS ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000 ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */
- { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-3800SAS ", 1 }, /* ASR-3800SAS (Hurricane44) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-3800 ", 1 }, /* ASR-3800 (Hurricane44) */
{ aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
}
MODULE_LICENSE("Dual BSD/GPL");
+#ifdef CONFIG_PCI
/* PCI Devices supported by this driver */
static struct pci_device_id advansys_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A,
{ }
};
MODULE_DEVICE_TABLE(pci, advansys_pci_tbl);
-
+#endif /* CONFIG_PCI */
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsic.o
ibmvscsic-y += ibmvscsi.o
+ifndef CONFIG_PPC_PSERIES
ibmvscsic-$(CONFIG_PPC_ISERIES) += iseries_vscsi.o
+endif
ibmvscsic-$(CONFIG_PPC_PSERIES) += rpa_vscsi.o
obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvstgt.o
if (!offset)
crypto_hash_update(
&tcp_conn->rx_hash,
- &sg[i], 1);
+ &sg[i], sg[i].length);
else
partial_sg_digest_update(
&tcp_conn->rx_hash,
tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->tx_hash.flags = 0;
- if (!tcp_conn->tx_hash.tfm)
+ if (IS_ERR(tcp_conn->tx_hash.tfm))
goto free_tcp_conn;
tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->rx_hash.flags = 0;
- if (!tcp_conn->rx_hash.tfm)
+ if (IS_ERR(tcp_conn->rx_hash.tfm))
goto free_tx_tfm;
return cls_conn;
sk = tcp_conn->sock->sk;
if (sk->sk_family == PF_INET) {
inet = inet_sk(sk);
- len = sprintf(buf, "%u.%u.%u.%u\n",
+ len = sprintf(buf, NIPQUAD_FMT "\n",
NIPQUAD(inet->daddr));
} else {
np = inet6_sk(sk);
- len = sprintf(buf,
- "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
- NIP6(np->daddr));
+ len = sprintf(buf, NIP6_FMT "\n", NIP6(np->daddr));
}
mutex_unlock(&conn->xmitmutex);
break;
}
if (rhdr->cmd_status == SAM_STAT_CHECK_CONDITION) {
- int senselen;
+ uint16_t senselen;
if (datalen < 2) {
invalid_datalen:
goto out;
}
- senselen = (data[0] << 8) | data[1];
+ senselen = be16_to_cpu(*(uint16_t *)data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
- min(senselen, SCSI_SENSE_BUFFERSIZE));
+ min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
debug_scsi("copied %d bytes of sense\n",
min(senselen, SCSI_SENSE_BUFFERSIZE));
}
pool->elements = kmalloc(sizeof(struct lpfc_dmabuf) *
LPFC_MBUF_POOL_SIZE, GFP_KERNEL);
+ if (!pool->elements)
+ goto fail_free_lpfc_mbuf_pool;
+
pool->max_count = 0;
pool->current_count = 0;
for ( i = 0; i < LPFC_MBUF_POOL_SIZE; i++) {
fail_free_mbox_pool:
mempool_destroy(phba->mbox_mem_pool);
fail_free_mbuf_pool:
- while (--i)
+ while (i--)
pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
pool->elements[i].phys);
kfree(pool->elements);
+ fail_free_lpfc_mbuf_pool:
pci_pool_destroy(phba->lpfc_mbuf_pool);
fail_free_dma_buf_pool:
pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
* Version : v00.00.03.05
*
* Authors:
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
- * Sumant Patro <Sumant.Patro@lsil.com>
+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com>
+ * Sumant Patro <Sumant.Patro@lsi.com>
*
* List of supported controllers
*
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
-MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
/*
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
ret = nsp_cs_config(link);
*/
if (shost->irq)
free_irq(shost->irq, shost);
- if (shost->dma_channel != 0xff)
- free_dma(shost->dma_channel);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
return SYM53C500_config(link);
} /* SYM53C500_attach */
int host_status = DID_ERROR;
uint16_t comp_status = le16_to_cpu(sts->comp_status);
uint16_t state_flags = le16_to_cpu(sts->state_flags);
- uint16_t residual_length = le32_to_cpu(sts->residual_length);
+ uint32_t residual_length = le32_to_cpu(sts->residual_length);
uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
#if DEBUG_QLA1280_INTR
static char *reason[] = {
"scsi: Underflow detected - retrying "
"command.\n");
host_status = DID_ERROR;
- } else
+ } else {
+ cp->resid = residual_length;
host_status = DID_OK;
+ }
break;
default:
#define CT_REJECT_RESPONSE 0x8001
#define CT_ACCEPT_RESPONSE 0x8002
+#define CT_REASON_INVALID_COMMAND_CODE 0x01
#define CT_REASON_CANNOT_PERFORM 0x09
#define CT_EXPL_ALREADY_REGISTERED 0x10
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
+ uint32_t gpsc_supported :1;
} flags;
atomic_t loop_state;
extern int qla2x00_abort_isp(scsi_qla_host_t *);
extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
-extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
ha->host_no, routine, ms_pkt->entry_status));
} else {
if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
- comp_status =
- ((struct ct_entry_24xx *)ms_pkt)->comp_status;
+ comp_status = le16_to_cpu(
+ ((struct ct_entry_24xx *)ms_pkt)->comp_status);
else
comp_status = le16_to_cpu(ms_pkt->status);
switch (comp_status) {
DEBUG2_3(qla2x00_dump_buffer(
(uint8_t *)&ct_rsp->header,
sizeof(struct ct_rsp_hdr)));
+ rval = QLA_INVALID_COMMAND;
} else
rval = QLA_SUCCESS;
break;
memset(list[i].fabric_port_name, 0, WWN_SIZE);
/* Prepare common MS IOCB */
- ms_pkt = qla2x00_prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
+ ms_pkt = ha->isp_ops.prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
GFPN_ID_RSP_SIZE);
/* Prepare CT request */
if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
return QLA_FUNCTION_FAILED;
+ if (!ha->flags.gpsc_supported)
+ return QLA_FUNCTION_FAILED;
rval = qla2x00_mgmt_svr_login(ha);
if (rval)
/*EMPTY*/
DEBUG2_3(printk("scsi(%ld): GPSC issue IOCB "
"failed (%d).\n", ha->host_no, rval));
- } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
- "GPSC") != QLA_SUCCESS) {
+ } else if ((rval = qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
+ "GPSC")) != QLA_SUCCESS) {
+ /* FM command unsupported? */
+ if (rval == QLA_INVALID_COMMAND &&
+ ct_rsp->header.reason_code ==
+ CT_REASON_INVALID_COMMAND_CODE) {
+ DEBUG2(printk("scsi(%ld): GPSC command "
+ "unsupported, disabling query...\n",
+ ha->host_no));
+ ha->flags.gpsc_supported = 0;
+ rval = QLA_FUNCTION_FAILED;
+ break;
+ }
rval = QLA_FUNCTION_FAILED;
} else {
/* Save portname */
}
}
-/*
- * qla2x00_update_fcport
- * Updates device on list.
- *
- * Input:
- * ha = adapter block pointer.
- * fcport = port structure pointer.
- *
- * Return:
- * 0 - Success
- * BIT_0 - error
- *
- * Context:
- * Kernel context.
- */
-void
-qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
-{
- fcport->ha = ha;
- fcport->login_retry = 0;
- fcport->port_login_retry_count = ha->port_down_retry_count *
- PORT_RETRY_TIME;
- atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
- PORT_RETRY_TIME);
- fcport->flags &= ~FCF_LOGIN_NEEDED;
-
- qla2x00_iidma_fcport(ha, fcport);
-
- atomic_set(&fcport->state, FCS_ONLINE);
-
- qla2x00_reg_remote_port(ha, fcport);
-}
-
-void
+static void
qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
{
struct fc_rport_identifiers rport_ids;
fcport->os_target_id = rport->scsi_target_id;
}
+/*
+ * qla2x00_update_fcport
+ * Updates device on list.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * fcport = port structure pointer.
+ *
+ * Return:
+ * 0 - Success
+ * BIT_0 - error
+ *
+ * Context:
+ * Kernel context.
+ */
+void
+qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+ fcport->ha = ha;
+ fcport->login_retry = 0;
+ fcport->port_login_retry_count = ha->port_down_retry_count *
+ PORT_RETRY_TIME;
+ atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
+ PORT_RETRY_TIME);
+ fcport->flags &= ~FCF_LOGIN_NEEDED;
+
+ qla2x00_iidma_fcport(ha, fcport);
+
+ atomic_set(&fcport->state, FCS_ONLINE);
+
+ qla2x00_reg_remote_port(ha, fcport);
+}
+
/*
* qla2x00_configure_fabric
* Setup SNS devices with loop ID's.
/* Set host adapter parameters. */
ha->flags.disable_risc_code_load = 0;
- ha->flags.enable_lip_reset = 1;
- ha->flags.enable_lip_full_login = 1;
- ha->flags.enable_target_reset = 1;
+ ha->flags.enable_lip_reset = 0;
+ ha->flags.enable_lip_full_login =
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ ha->flags.enable_target_reset =
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
ha->flags.enable_led_scheme = 0;
ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
if (stat & HSR_RISC_PAUSED) {
hccr = RD_REG_WORD(®->hccr);
if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
- qla_printk(KERN_INFO, ha,
- "Parity error -- HCCR=%x.\n", hccr);
+ qla_printk(KERN_INFO, ha, "Parity error -- "
+ "HCCR=%x, Dumping firmware!\n", hccr);
else
- qla_printk(KERN_INFO, ha,
- "RISC paused -- HCCR=%x.\n", hccr);
+ qla_printk(KERN_INFO, ha, "RISC paused -- "
+ "HCCR=%x, Dumping firmware!\n", hccr);
/*
* Issue a "HARD" reset in order for the RISC
*/
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
RD_REG_WORD(®->hccr);
+
+ ha->isp_ops.fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSR_RISC_INT) == 0)
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
+
+ ha->flags.gpsc_supported = 1;
break;
case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
- qla24xx_fw_dump(ha, 1);
-
+ ha->isp_ops.fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
mcp->mb[0] = MBC_LIP_FULL_LOGIN;
- mcp->mb[1] = BIT_0;
- mcp->mb[2] = 0xff;
- mcp->mb[3] = 0;
+ mcp->mb[1] = BIT_6;
+ mcp->mb[2] = 0;
+ mcp->mb[3] = ha->loop_reset_delay;
mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
} else {
mcp->mb[0] = MBC_LIP_RESET;
ha->host_no));
mcp->mb[0] = MBC_LIP_FULL_LOGIN;
- mcp->mb[1] = 0;
- mcp->mb[2] = 0xff;
+ mcp->mb[1] = IS_QLA24XX(ha) || IS_QLA54XX(ha) ? BIT_3: 0;
+ mcp->mb[2] = 0;
mcp->mb[3] = 0;
mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->mb[4] = LSW(MSD(eft_dma));
mcp->mb[5] = MSW(MSD(eft_dma));
mcp->mb[6] = buffers;
- mcp->mb[7] = buffers;
+ mcp->mb[7] = 0;
mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
}
mcp->tov = 30;
static int
qla2x00_loop_reset(scsi_qla_host_t *ha)
{
- int status = QLA_SUCCESS;
+ int ret;
struct fc_port *fcport;
+ if (ha->flags.enable_lip_full_login) {
+ ret = qla2x00_full_login_lip(ha);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "full_login_lip=%d.\n", __func__, ha->host_no,
+ ret));
+ }
+ atomic_set(&ha->loop_state, LOOP_DOWN);
+ atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
+ qla2x00_mark_all_devices_lost(ha, 0);
+ qla2x00_wait_for_loop_ready(ha);
+ }
+
if (ha->flags.enable_lip_reset) {
- status = qla2x00_lip_reset(ha);
+ ret = qla2x00_lip_reset(ha);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "lip_reset=%d.\n", __func__, ha->host_no, ret));
+ }
+ qla2x00_wait_for_loop_ready(ha);
}
- if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
+ if (ha->flags.enable_target_reset) {
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
- status = qla2x00_device_reset(ha, fcport);
- if (status != QLA_SUCCESS)
- break;
+ ret = qla2x00_device_reset(ha, fcport);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "target_reset=%d d_id=%x.\n", __func__,
+ ha->host_no, ret, fcport->d_id.b24));
+ }
}
}
- if (status == QLA_SUCCESS &&
- ((!ha->flags.enable_target_reset &&
- !ha->flags.enable_lip_reset) ||
- ha->flags.enable_lip_full_login)) {
-
- status = qla2x00_full_login_lip(ha);
- }
-
/* Issue marker command only when we are going to start the I/O */
ha->marker_needed = 1;
- if (status) {
- /* Empty */
- DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
- __func__,
- ha->host_no));
- } else {
- /* Empty */
- DEBUG3(printk("%s(%ld): exiting normally.\n",
- __func__,
- ha->host_no));
- }
-
- return(status);
+ return QLA_SUCCESS;
}
/*
sht = &qla2x00_driver_template;
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
- pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
sht = &qla24xx_driver_template;
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.07-k3"
+#define QLA2XXX_VERSION "8.01.07-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
if (!rq->bio)
blk_rq_bio_prep(q, rq, bio);
- else if (!q->back_merge_fn(q, rq, bio))
+ else if (!ll_back_merge_fn(q, rq, bio))
return -EINVAL;
else {
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->hard_nr_sectors += bio_sectors(bio);
- rq->nr_sectors = rq->hard_nr_sectors;
}
return 0;
/**
* scsi_complete_async_scans - Wait for asynchronous scans to complete
*
- * Asynchronous scans add themselves to the scanning_hosts list. Once
- * that list is empty, we know that the scans are complete. Rather than
- * waking up periodically to check the state of the list, we pretend to be
- * a scanning task by adding ourselves at the end of the list and going to
- * sleep. When the task before us wakes us up, we take ourselves off the
- * list and return.
+ * When this function returns, any host which started scanning before
+ * this function was called will have finished its scan. Hosts which
+ * started scanning after this function was called may or may not have
+ * finished.
*/
int scsi_complete_async_scans(void)
{
spin_lock(&async_scan_lock);
list_del(&data->list);
+ if (!list_empty(&scanning_hosts)) {
+ struct async_scan_data *next = list_entry(scanning_hosts.next,
+ struct async_scan_data, list);
+ complete(&next->prev_finished);
+ }
done:
spin_unlock(&async_scan_lock);
sdev->no_uld_attach = 1;
switch (sdev->type = (inq_result[0] & 0x1f)) {
+ case TYPE_RBC:
+ /* RBC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ /* fall through */
case TYPE_TAPE:
case TYPE_DISK:
case TYPE_PRINTER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
case TYPE_RAID:
- case TYPE_RBC:
sdev->writeable = 1;
break;
- case TYPE_WORM:
case TYPE_ROM:
+ /* MMC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ /* fall through */
+ case TYPE_WORM:
sdev->writeable = 0;
break;
default:
{
int err;
- printk(KERN_INFO "Loading iSCSI transport class v%s.",
+ printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
ISCSI_TRANSPORT_VERSION);
err = class_register(&iscsi_transport_class);
if (!sshdr)
sshdr = &sshdr_tmp;
- if (scsi_normalize_sense(sense, sizeof(*sense),
+ if (scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE,
sshdr)
&& sshdr->sense_key == UNIT_ATTENTION)
continue;
#define DPRINTK( when, msg... ) do { if ( (DEBUG & (when)) == (when) ) printk( msg ); } while (0)
#else
#define DPRINTK( when, msg... ) do { } while (0)
+#define DEBUG 0
#endif
#define DANY( msg... ) DPRINTK( 0xffff, msg );
#ifdef ARBITRATE
" ARBITRATE"
#endif
-#ifdef DEBUG
+#if DEBUG
" DEBUG"
#endif
#ifdef FAST
unsigned char *data = NULL;
struct scatterlist *buffer = NULL;
int clock, temp, nobuffs = 0, done = 0, len = 0;
-#ifdef DEBUG
+#if DEBUG
int transfered = 0, phase = 0, newphase;
#endif
register unsigned char status_read;
}
ret = cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
- if (ret != ENOSYS)
+ if (ret != -ENOSYS)
return ret;
/*
local_irq_restore(flags);
}
-static int serial8250_console_setup(struct console *co, char *options)
+static int __init serial8250_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
*/
if (co->index >= UART_NR)
co->index = 0;
+ if (!amba_ports[co->index])
+ return -ENODEV;
port = &amba_ports[co->index]->port;
if (options)
if (co->index >= UART_NR)
co->index = 0;
uap = amba_ports[co->index];
+ if (!uap)
+ return -ENODEV;
uap->port.uartclk = clk_get_rate(uap->clk);
struct atmel_uart_data *data = pdev->dev.platform_data;
port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
- port->fifosize = 1;
+ port->fifosize = 1;
port->line = pdev->id;
port->dev = &pdev->dev;
if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
enable_irq_wake(port->irq);
else {
- disable_irq_wake(port->irq);
uart_suspend_port(&atmel_uart, port);
atmel_port->suspended = 1;
}
uart_resume_port(&atmel_uart, port);
atmel_port->suspended = 0;
}
+ else
+ disable_irq_wake(port->irq);
return 0;
}
#define ATMEL_US_CSR 0x14 /* Channel Status Register */
#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
-#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */
+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
static int __init
mpc52xx_console_init(void)
{
+#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
+#endif
register_console(&mpc52xx_console);
return 0;
}
err = request_irq(up->port.irq, sunsab_interrupt,
IRQF_SHARED, "sab", up);
if (err) {
- of_iounmap(up->port.membase,
+ of_iounmap(&op->resource[0],
+ up->port.membase,
sizeof(union sab82532_async_regs));
return err;
}
sizeof(union sab82532_async_regs),
(inst * 2) + 1);
if (err) {
- of_iounmap(up[0].port.membase,
+ of_iounmap(&op->resource[0],
+ up[0].port.membase,
sizeof(union sab82532_async_regs));
free_irq(up[0].port.irq, &up[0]);
return err;
static void __devexit sab_remove_one(struct uart_sunsab_port *up)
{
+ struct of_device *op = to_of_device(up->port.dev);
+
uart_remove_one_port(&sunsab_reg, &up->port);
if (!(up->port.line & 1))
free_irq(up->port.irq, up);
- of_iounmap(up->port.membase,
+ of_iounmap(&op->resource[0],
+ up->port.membase,
sizeof(union sab82532_async_regs));
}
return 0;
out_unmap:
- of_iounmap(up->port.membase, up->reg_size);
+ of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
return err;
}
-static int __devexit su_remove(struct of_device *dev)
+static int __devexit su_remove(struct of_device *op)
{
- struct uart_sunsu_port *up = dev_get_drvdata(&dev->dev);;
+ struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
if (up->su_type == SU_PORT_MS ||
up->su_type == SU_PORT_KBD) {
}
if (up->port.membase)
- of_iounmap(up->port.membase, up->reg_size);
+ of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
if (!keyboard_mouse) {
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0],
+ rp, sizeof(struct zilog_layout));
return err;
}
err = uart_add_one_port(&sunzilog_reg, &up[1].port);
if (err) {
uart_remove_one_port(&sunzilog_reg, &up[0].port);
- of_iounmap(rp, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0],
+ rp, sizeof(struct zilog_layout));
return err;
}
} else {
uart_remove_one_port(&sunzilog_reg, &up->port);
}
-static int __devexit zs_remove(struct of_device *dev)
+static int __devexit zs_remove(struct of_device *op)
{
- struct uart_sunzilog_port *up = dev_get_drvdata(&dev->dev);
+ struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
struct zilog_layout __iomem *regs;
zs_remove_one(&up[0]);
zs_remove_one(&up[1]);
regs = sunzilog_chip_regs[up[0].port.line / 2];
- of_iounmap(regs, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
static void ulite_config_port(struct uart_port *port, int flags)
{
- ulite_request_port(port);
- port->type = PORT_UARTLITE;
+ if (!ulite_request_port(port))
+ port->type = PORT_UARTLITE;
}
static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
spi->bits_per_word - 16 : spi->bits_per_word)
| SSCR0_SSE
| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
- chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
- | (((spi->mode & SPI_CPOL) != 0) << 3);
+ chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
+ chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
+ | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (drv_data->ssp_type != PXA25x_SSP)
class_device_initialize(&master->cdev);
master->cdev.class = &spi_master_class;
- kobj_set_kset_s(&master->cdev, spi_master_class.subsys);
master->cdev.dev = get_device(dev);
spi_master_set_devdata(master, &master[1]);
*/
struct spi_master *spi_busnum_to_master(u16 bus_num)
{
- char name[9];
- struct kobject *bus;
-
- snprintf(name, sizeof name, "spi%u", bus_num);
- bus = kset_find_obj(&spi_master_class.subsys.kset, name);
- if (bus)
- return container_of(bus, struct spi_master, cdev.kobj);
- return NULL;
+ struct class_device *cdev;
+ struct spi_master *master = NULL;
+ struct spi_master *m;
+
+ down(&spi_master_class.sem);
+ list_for_each_entry(cdev, &spi_master_class.children, node) {
+ m = container_of(cdev, struct spi_master, cdev);
+ if (m->bus_num == bus_num) {
+ master = spi_master_get(m);
+ break;
+ }
+ }
+ up(&spi_master_class.sem);
+ return master;
}
EXPORT_SYMBOL_GPL(spi_busnum_to_master);
{ \
u32 data; \
const type * tx = mpc83xx_spi->tx; \
+ if (!tx) \
+ return 0; \
data = *tx++; \
mpc83xx_spi->tx = tx; \
return data; \
*
*/
-
-//#define DEBUG
-
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
int len;
int count;
+ int (*set_cs)(struct s3c2410_spi_info *spi,
+ int cs, int pol);
+
/* data buffers */
const unsigned char *tx;
unsigned char *rx;
return spi_master_get_devdata(sdev->master);
}
+static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
+{
+ s3c2410_gpio_setpin(spi->pin_cs, pol);
+}
+
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
{
struct s3c24xx_spi *hw = to_hw(spi);
switch (value) {
case BITBANG_CS_INACTIVE:
- if (hw->pdata->set_cs)
- hw->pdata->set_cs(hw->pdata, value, cspol);
- else
- s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+ hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1);
break;
case BITBANG_CS_ACTIVE:
/* write new configration */
writeb(spcon, hw->regs + S3C2410_SPCON);
-
- if (hw->pdata->set_cs)
- hw->pdata->set_cs(hw->pdata, value, cspol);
- else
- s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+ hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol);
break;
-
}
}
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
{
- return hw->tx ? hw->tx[count] : 0xff;
+ return hw->tx ? hw->tx[count] : 0;
}
static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
/* setup any gpio we can */
if (!hw->pdata->set_cs) {
+ hw->set_cs = s3c24xx_spi_gpiocs;
+
s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
- }
+ } else
+ hw->set_cs = hw->pdata->set_cs;
/* register our spi controller */
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
+#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/spi-gpio.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
struct s3c2410_spigpio {
struct spi_bitbang bitbang;
struct usblp {
struct usb_device *dev; /* USB device */
- struct semaphore sem; /* locks this struct, especially "dev" */
+ struct mutex mut; /* locks this struct, especially "dev" */
char *writebuf; /* write transfer_buffer */
char *readbuf; /* read transfer_buffer */
char *statusbuf; /* status transfer_buffer */
{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
+ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
{ 0, 0 }
};
int twoints[2];
int retval = 0;
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
if (!usblp->present) {
retval = -ENODEV;
goto done;
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return retval;
}
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int timeout, rv, err = 0, transfer_length = 0;
+ int timeout, intr, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
if (rv < 0)
return writecount ? writecount : -EINTR;
}
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return writecount ? writecount : -EINTR;
if (!usblp->present) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return -ENODEV;
}
if (usblp->sleeping) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return writecount ? writecount : -ENODEV;
}
err = usblp->writeurb->status;
} else
err = usblp_check_status(usblp, err);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
/* if the fault was due to disconnect, let khubd's
- * call to usblp_disconnect() grab usblp->sem ...
+ * call to usblp_disconnect() grab usblp->mut ...
*/
schedule ();
continue;
*/
writecount += transfer_length;
if (writecount == count) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
break;
}
if (copy_from_user(usblp->writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
return writecount ? writecount : -EFAULT;
}
count = -EIO;
else
count = writecount ? writecount : -ENOMEM;
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
break;
}
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
}
return count;
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int rv;
+ int rv, intr;
if (!usblp->bidir)
return -EINVAL;
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return -EINTR;
if (!usblp->present) {
count = -ENODEV;
goto done;
count = -EAGAIN;
goto done;
}
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
- down(&usblp->sem);
+ mutex_lock(&usblp->mut);
if (rv < 0) {
count = -EINTR;
goto done;
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return count;
}
goto abort;
}
usblp->dev = dev;
- init_MUTEX (&usblp->sem);
+ mutex_init (&usblp->mut);
init_waitqueue_head(&usblp->wait);
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usblp->intf = intf;
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->present = 0;
usb_set_intfdata (intf, NULL);
usblp->writebuf, usblp->writeurb->transfer_dma);
usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
usblp->readbuf, usblp->readurb->transfer_dma);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
if (!usblp->used)
usblp_cleanup (usblp);
/* this races against normal access and open */
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
/* we take no more IO */
usblp->sleeping = 1;
usblp_unlink_urbs(usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return 0;
int r;
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->sleeping = 0;
r = handle_bidir (usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return r;
If you are unsure about this, say N here.
-config USB_MULTITHREAD_PROBE
- bool "USB Multi-threaded probe (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
- default n
- help
- Say Y here if you want the USB core to spawn a new thread for
- every USB device that is probed. This can cause a small speedup
- in boot times on systems with a lot of different USB devices.
-
- This option should be safe to enable, but if any odd probing
- problems are found, please disable it, or dynamically turn it
- off in the /sys/module/usbcore/parameters/multithread_probe
- file
-
- When in doubt, say N.
-
config USB_OTG
bool
depends on USB && EXPERIMENTAL
kfree(dr);
return -EFAULT;
}
- snoop(&ps->dev->dev, "control urb\n");
+ snoop(&ps->dev->dev, "control urb: bRequest=%02x "
+ "bRrequestType=%02x wValue=%04x "
+ "wIndex=%04x wLength=%04x\n",
+ dr->bRequest, dr->bRequestType, dr->wValue,
+ dr->wIndex, dr->wLength);
break;
case USBDEVFS_URB_TYPE_BULK:
struct ep_device *ep_dev = to_ep_device(dev);
dev_dbg(dev, "%s called for %s\n", __FUNCTION__, dev->bus_id);
+ endpoint_free_minor(ep_dev);
kfree(ep_dev);
}
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
- endpoint_free_minor(ep_dev);
device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
destroy_endpoint_class();
static struct task_struct *khubd_task;
/* multithreaded probe logic */
-static int multithread_probe =
-#ifdef CONFIG_USB_MULTITHREAD_PROBE
- 1;
-#else
- 0;
-#endif
-module_param(multithread_probe, bool, S_IRUGO);
-MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread");
+static int multithread_probe = 0;
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9261_matrix.h>
#include "at91_udc.h"
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
-/*-------------------------------------------------------------------------*/
-/*
- * Read from a UDP register.
- */
-static inline unsigned long at91_udp_read(unsigned int reg)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- return __raw_readl(udp_base + reg);
-}
-
-/*
- * Write to a UDP register.
- */
-static inline void at91_udp_write(unsigned int reg, unsigned long value)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- __raw_writel(value, udp_base + reg);
-}
+#define at91_udp_read(dev, reg) \
+ __raw_readl((dev)->udp_baseaddr + (reg))
+#define at91_udp_write(dev, reg, val) \
+ __raw_writel((val), (dev)->udp_baseaddr + (reg))
/*-------------------------------------------------------------------------*/
return 0;
}
- tmp = at91_udp_read(AT91_UDP_FRM_NUM);
+ tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM);
seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
(tmp & AT91_UDP_FRM_OK) ? " ok" : "",
(tmp & AT91_UDP_FRM_ERR) ? " err" : "",
(tmp & AT91_UDP_NUM));
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
(tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
(tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
(tmp & AT91_UDP_CONFG) ? " confg" : "",
(tmp & AT91_UDP_FADDEN) ? " fadden" : "");
- tmp = at91_udp_read(AT91_UDP_FADDR);
+ tmp = at91_udp_read(udc, AT91_UDP_FADDR);
seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp,
(tmp & AT91_UDP_FEN) ? " fen" : "",
(tmp & AT91_UDP_FADD));
- proc_irq_show(s, "imr ", at91_udp_read(AT91_UDP_IMR));
- proc_irq_show(s, "isr ", at91_udp_read(AT91_UDP_ISR));
+ proc_irq_show(s, "imr ", at91_udp_read(udc, AT91_UDP_IMR));
+ proc_irq_show(s, "isr ", at91_udp_read(udc, AT91_UDP_ISR));
if (udc->enabled && udc->vbus) {
proc_ep_show(s, &udc->ep[0]);
static void done(struct at91_ep *ep, struct at91_request *req, int status)
{
unsigned stopped = ep->stopped;
+ struct at91_udc *udc = ep->udc;
list_del_init(&req->queue);
if (req->req.status == -EINPROGRESS)
/* ep0 is always ready; other endpoints need a non-empty queue */
if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
- at91_udp_write(AT91_UDP_IDR, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
}
/*-------------------------------------------------------------------------*/
* reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
* since endpoint resets don't reset hw pingpong state.
*/
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_RST_EP, 0);
local_irq_restore(flags);
return 0;
static int at91_ep_disable (struct usb_ep * _ep)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
unsigned long flags;
if (ep == &ep->udc->ep[0])
/* reset fifos and endpoint */
if (ep->udc->clocked) {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
__raw_writel(0, ep->creg);
}
* reconfigures the endpoints.
*/
if (dev->wait_for_config_ack) {
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
tmp ^= AT91_UDP_CONFG;
VDBG("toggle config\n");
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
}
if (req->req.length == 0) {
ep0_in_status:
if (req && !status) {
list_add_tail (&req->queue, &ep->queue);
- at91_udp_write(AT91_UDP_IER, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
}
done:
local_irq_restore(flags);
static int at91_ep_set_halt(struct usb_ep *_ep, int value)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
u32 __iomem *creg;
u32 csr;
unsigned long flags;
csr |= AT91_UDP_FORCESTALL;
VDBG("halt %s\n", ep->ep.name);
} else {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
csr &= ~AT91_UDP_FORCESTALL;
}
__raw_writel(csr, creg);
static int at91_get_frame(struct usb_gadget *gadget)
{
+ struct at91_udc *udc = to_udc(gadget);
+
if (!to_udc(gadget)->clocked)
return -EINVAL;
- return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+ return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
}
static int at91_wakeup(struct usb_gadget *gadget)
/* NOTE: some "early versions" handle ESR differently ... */
- glbstate = at91_udp_read(AT91_UDP_GLB_STAT);
+ glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT);
if (!(glbstate & AT91_UDP_ESR))
goto done;
glbstate |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, glbstate);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
done:
local_irq_restore(flags);
ep->stopped = 0;
ep->fifo_bank = 0;
ep->ep.maxpacket = ep->maxpacket;
+ ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
// initialiser une queue par endpoint
INIT_LIST_HEAD(&ep->queue);
}
if (!udc->enabled || !udc->vbus)
is_on = 0;
DBG("%sactive\n", is_on ? "" : "in");
+
if (is_on) {
clk_on(udc);
- at91_udp_write(AT91_UDP_TXVC, 0);
- at91_set_gpio_value(udc->board.pullup_pin, 1);
- } else {
+ at91_udp_write(udc, AT91_UDP_TXVC, 0);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 1);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc |= AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr |= AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
+ } else {
stop_activity(udc);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_set_gpio_value(udc->board.pullup_pin, 0);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 0);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc &= ~AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
clk_off(udc);
}
}
// VDBG("vbus %s\n", is_active ? "on" : "off");
local_irq_save(flags);
udc->vbus = (is_active != 0);
- pullup(udc, is_active);
+ if (udc->driver)
+ pullup(udc, is_active);
+ else
+ pullup(udc, 0);
local_irq_restore(flags);
return 0;
}
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_SET_CONFIGURATION:
- tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
if (pkt.r.wValue)
udc->wait_for_config_ack = (tmp == 0);
else
case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_GET_STATUS:
tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
- if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+ if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
PACKET("get device status\n");
__raw_writeb(tmp, dreg);
| USB_REQ_SET_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_CLEAR_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
/*
} else if (ep->is_in)
goto stall;
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
tmp = __raw_readl(ep->creg);
tmp |= CLR_FX;
tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
#undef w_length
/* pass request up to the gadget driver */
- status = udc->driver->setup(&udc->gadget, &pkt.r);
+ if (udc->driver)
+ status = udc->driver->setup(&udc->gadget, &pkt.r);
+ else
+ status = -ENODEV;
if (status < 0) {
stall:
VDBG("req %02x.%02x protocol STALL; stat %d\n",
if (udc->wait_for_addr_ack) {
u32 tmp;
- at91_udp_write(AT91_UDP_FADDR,
+ at91_udp_write(udc, AT91_UDP_FADDR,
AT91_UDP_FEN | udc->addr);
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_FADDEN;
if (udc->addr)
tmp |= AT91_UDP_FADDEN;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
udc->wait_for_addr_ack = 0;
VDBG("address %d\n", udc->addr);
while (rescans--) {
u32 status;
- status = at91_udp_read(AT91_UDP_ISR)
- & at91_udp_read(AT91_UDP_IMR);
+ status = at91_udp_read(udc, AT91_UDP_ISR)
+ & at91_udp_read(udc, AT91_UDP_IMR);
if (!status)
break;
/* USB reset irq: not maskable */
if (status & AT91_UDP_ENDBUSRES) {
- at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
- at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS);
/* Atmel code clears this irq twice */
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
VDBG("end bus reset\n");
udc->addr = 0;
stop_activity(udc);
/* enable ep0 */
- at91_udp_write(AT91_UDP_CSR(0),
+ at91_udp_write(udc, AT91_UDP_CSR(0),
AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
udc->gadget.speed = USB_SPEED_FULL;
udc->suspended = 0;
- at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0));
/*
* NOTE: this driver keeps clocks off unless the
/* host initiated suspend (3+ms bus idle) */
} else if (status & AT91_UDP_RXSUSP) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
// VDBG("bus suspend\n");
if (udc->suspended)
continue;
/* host initiated resume */
} else if (status & AT91_UDP_RXRSM) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
// VDBG("bus resume\n");
if (!udc->suspended)
continue;
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(0)),
.int_mask = 1 << 0,
},
.ep[1] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(1)),
.int_mask = 1 << 1,
},
.ep[2] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(2)),
.int_mask = 1 << 2,
},
.ep[3] = {
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(3)),
.int_mask = 1 << 3,
},
.ep[4] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(4)),
.int_mask = 1 << 4,
},
.ep[5] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(5)),
.int_mask = 1 << 5,
},
/* ep6 and ep7 are also reserved (custom silicon might use them) */
int retval;
if (!driver
- || driver->speed != USB_SPEED_FULL
+ || driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup) {
DBG("bad parameter.\n");
return -EINVAL;
if (retval) {
DBG("driver->bind() returned %d\n", retval);
udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ udc->gadget.dev.driver_data = NULL;
+ udc->enabled = 0;
+ udc->selfpowered = 0;
return retval;
}
{
struct at91_udc *udc = &controller;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
udc->enabled = 0;
- at91_udp_write(AT91_UDP_IDR, ~0);
+ at91_udp_write(udc, AT91_UDP_IDR, ~0);
pullup(udc, 0);
local_irq_enable();
struct device *dev = &pdev->dev;
struct at91_udc *udc;
int retval;
+ struct resource *res;
if (!dev->platform_data) {
/* small (so we copy it) but critical! */
return -ENODEV;
}
- if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start,
+ res->end - res->start + 1,
+ driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
}
udc->gadget.dev.parent = dev;
udc->board = *(struct at91_udc_data *) dev->platform_data;
udc->pdev = pdev;
- udc_reinit(udc);
udc->enabled = 0;
+ udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!udc->udp_baseaddr) {
+ release_mem_region(res->start, res->end - res->start + 1);
+ return -ENOMEM;
+ }
+
+ udc_reinit(udc);
+
/* get interface and function clocks */
udc->iclk = clk_get(dev, "udc_clk");
udc->fclk = clk_get(dev, "udpck");
if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
DBG("clocks missing\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto fail0;
}
retval = device_register(&udc->gadget.dev);
/* don't do anything until we have both gadget driver and VBUS */
clk_enable(udc->iclk);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
+ /* Clear all pending interrupts - UDP may be used by bootloader. */
+ at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
goto fail1;
}
if (udc->board.vbus_pin > 0) {
+ /*
+ * Get the initial state of VBUS - we cannot expect
+ * a pending interrupt.
+ */
+ udc->vbus = at91_get_gpio_value(udc->board.vbus_pin);
if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+ release_mem_region(res->start, res->end - res->start + 1);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
static int __devexit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ struct resource *res;
DBG("remove\n");
- pullup(udc, 0);
+ if (udc->driver)
+ return -EBUSY;
- if (udc->driver != 0)
- usb_gadget_unregister_driver(udc->driver);
+ pullup(udc, 0);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
free_irq(udc->board.vbus_pin, udc);
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+
+ iounmap(udc->udp_baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
clk_put(udc->iclk);
clk_put(udc->fclk);
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
-#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
+#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
-#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
+#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
-
+#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */
/*-------------------------------------------------------------------------*/
struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
+ void __iomem *udp_baseaddr;
int udp_irq;
};
return -EINVAL;
if (dum->driver)
return -EBUSY;
- if (!driver->bind || !driver->unbind || !driver->setup
+ if (!driver->bind || !driver->setup
|| driver->speed == USB_SPEED_UNKNOWN)
return -EINVAL;
err_bind_driver:
driver_unregister (&driver->driver);
err_register:
- driver->unbind (&dum->gadget);
+ if (driver->unbind)
+ driver->unbind (&dum->gadget);
spin_lock_irq (&dum->lock);
dum->pullup = 0;
set_link_state (dum);
if (!dum)
return -ENODEV;
- if (!driver || driver != dum->driver)
+ if (!driver || driver != dum->driver || !driver->unbind)
return -EINVAL;
dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
#endif
.function = (char *) longname,
.bind = fsg_bind,
- .unbind = __exit_p(fsg_unbind),
+ .unbind = fsg_unbind,
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.suspend = fsg_suspend,
struct usb_request *req; /* for control responses */
u8 config;
struct usb_ep *in_ep, *out_ep;
- struct snd_card *card;
+ struct snd_card *card;
struct snd_rawmidi *rmidi;
struct snd_rawmidi_substream *in_substream;
struct snd_rawmidi_substream *out_substream;
int status = req->status;
switch (status) {
- case 0: /* normal completion */
+ case 0: /* normal completion */
if (ep == dev->out_ep) {
/* we received stuff.
req is queued again, below */
break;
/* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
.speed = USB_SPEED_FULL,
.function = (char *)longname,
.bind = gmidi_bind,
- .unbind = __exit_p(gmidi_unbind),
+ .unbind = gmidi_unbind,
.setup = gmidi_setup,
.disconnect = gmidi_disconnect,
.suspend = gmidi_suspend,
.resume = gmidi_resume,
- .driver = {
+ .driver = {
.name = (char *)shortname,
.owner = THIS_MODULE,
},
if (!driver
|| driver->speed != USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
struct goku_udc *dev = pci_get_drvdata(pdev);
DBG(dev, "%s\n", __FUNCTION__);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN(dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver(dev->driver);
- }
+
+ BUG_ON(dev->driver);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
remove_proc_entry(proc_node_name, NULL);
DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
if (!driver
- || driver->speed != USB_SPEED_FULL
- || !driver->bind
- || !driver->unbind || !driver->disconnect || !driver->setup)
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->disconnect
+ || !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
DEBUG("%s: %p\n", __FUNCTION__, pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
free_irq(IRQ_USBINTR, dev);
if (!driver
|| driver->speed != USB_SPEED_HIGH
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
if (!dev)
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave (&dev->lock, flags);
{
struct net2280 *dev = pci_get_drvdata (pdev);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN (dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver (dev->driver);
- }
+ BUG_ON(dev->driver);
/* then clean up the resources we allocated during probe() */
net2280_led_shutdown (dev);
#include <linux/usb_gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
#include <asm/byteorder.h>
#include <asm/io.h>
/* bulk DMA seems to be behaving for both IN and OUT */
#define USE_DMA
+/* FIXME: OMAP2 currently has some problem in DMA mode */
+#ifdef CONFIG_ARCH_OMAP2
+#undef USE_DMA
+#endif
+
/* ISO too */
#define USE_ISO
* boot parameter "omap_udc:fifo_mode=42"
*/
module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)");
+MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
#ifdef USE_DMA
static unsigned use_dma = 1;
/*-------------------------------------------------------------------------*/
/* there's a notion of "current endpoint" for modifying endpoint
- * state, and PIO access to its FIFO.
+ * state, and PIO access to its FIFO.
*/
static void use_ep(struct omap_ep *ep, u16 select)
#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
-static inline int
+static inline int
write_packet(u8 *buf, struct omap_req *req, unsigned max)
{
unsigned len;
return is_last;
}
-static inline int
+static inline int
read_packet(u8 *buf, struct omap_req *req, unsigned avail)
{
unsigned len;
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
- csac = omap_readw(OMAP_DMA_CSAC(lch));
+ csac = OMAP_DMA_CSAC_REG(lch);
if (csac == 0)
- csac = omap_readw(OMAP_DMA_CSAC(lch));
+ csac = OMAP_DMA_CSAC_REG(lch);
return csac;
}
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
- cdac = omap_readw(OMAP_DMA_CDAC(lch));
+ cdac = OMAP_DMA_CDAC_REG(lch);
if (cdac == 0)
- cdac = omap_readw(OMAP_DMA_CDAC(lch));
+ cdac = OMAP_DMA_CDAC_REG(lch);
return cdac;
}
}
#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
- ? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \
+ ? OMAP_DMA_CSAC_REG(x) /* really: CPC */ \
: dma_cdac(x))
static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
txdma_ctrl = UDC_TXN_EOT | length;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
- length, 1, sync_mode);
+ length, 1, sync_mode, 0, 0);
} else {
length = min(length / ep->maxpacket,
(unsigned) UDC_TXN_TSC + 1);
- txdma_ctrl = length;
+ txdma_ctrl = length;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
- ep->ep.maxpacket >> 1, length, sync_mode);
+ ep->ep.maxpacket >> 1, length, sync_mode,
+ 0, 0);
length *= ep->maxpacket;
}
omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
- OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+ OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+ 0, 0);
omap_start_dma(ep->lch);
ep->dma_counter = dma_csac(ep->lch);
req->dma_bytes = packets * ep->ep.maxpacket;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
ep->ep.maxpacket >> 1, packets,
- OMAP_DMA_SYNC_ELEMENT);
+ OMAP_DMA_SYNC_ELEMENT,
+ 0, 0);
omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
- OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+ OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+ 0, 0);
ep->dma_counter = DMA_DEST_LAST(ep->lch);
UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
omap_set_dma_dest_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+ (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+ 0, 0);
}
} else {
status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel,
omap_set_dma_src_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+ (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+ 0, 0);
/* EMIFF */
omap_set_dma_dest_burst_mode(ep->lch,
OMAP_DMA_DATA_BURST_4);
/* channel type P: hw synch (fifo) */
if (!cpu_is_omap15xx())
- omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch));
+ OMAP1_DMA_LCH_CTRL_REG(ep->lch) = 2;
}
just_restart:
else
req = NULL;
- active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0;
+ active = ((1 << 7) & OMAP_DMA_CCR_REG(ep->lch)) != 0;
DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
active ? "active" : "idle",
*/
dma_channel_release(ep);
dma_channel_claim(ep, channel);
- } else
+ } else
done(ep, req, -ECONNRESET);
spin_unlock_irqrestore(&ep->udc->lock, flags);
return 0;
/* IN endpoints must already be idle */
if ((ep->bEndpointAddress & USB_DIR_IN)
- && !list_empty(&ep->queue)) {
+ && !list_empty(&ep->queue)) {
status = -EAGAIN;
goto done;
}
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
}
+static struct omap_udc *udc;
+
+static void omap_udc_enable_clock(int enable)
+{
+ if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
+ return;
+
+ if (enable) {
+ clk_enable(udc->dc_clk);
+ clk_enable(udc->hhc_clk);
+ udelay(100);
+ } else {
+ clk_disable(udc->hhc_clk);
+ clk_disable(udc->dc_clk);
+ }
+}
+
/*
* Called by whatever detects VBUS sessions: external transceiver
* driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock.
else
FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
}
+ if (udc->dc_clk != NULL && is_active) {
+ if (!udc->clk_requested) {
+ omap_udc_enable_clock(1);
+ udc->clk_requested = 1;
+ }
+ }
if (can_pullup(udc))
pullup_enable(udc);
else
pullup_disable(udc);
+ if (udc->dc_clk != NULL && !is_active) {
+ if (udc->clk_requested) {
+ omap_udc_enable_clock(0);
+ udc->clk_requested = 0;
+ }
+ }
spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
}
}
- /* IN/OUT packets mean we're in the DATA or STATUS stage.
+ /* IN/OUT packets mean we're in the DATA or STATUS stage.
* This driver uses only uses protocol stalls (ep0 never halts),
* and if we got this far the gadget driver already had a
* chance to stall. Tries to be forgiving of host oddities.
} else if (stat == 0)
UDC_CTRL_REG = UDC_SET_FIFO_EN;
UDC_EP_NUM_REG = 0;
-
+
/* activate status stage */
if (stat == 1) {
done(ep0, req, 0);
spin_lock_irqsave(&ep->udc->lock, flags);
if (!list_empty(&ep->queue) && ep->ackwait) {
- use_ep(ep, 0);
+ use_ep(ep, UDC_EP_SEL);
stat_flg = UDC_STAT_FLG_REG;
if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
req = container_of(ep->queue.next,
struct omap_req, queue);
- UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL;
(void) read_fifo(ep, req);
UDC_EP_NUM_REG = ep->bEndpointAddress;
UDC_CTRL_REG = UDC_SET_FIFO_EN;
ep->ackwait = 1 + ep->double_buf;
- }
+ } else
+ deselect_ep();
}
mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
spin_unlock_irqrestore(&ep->udc->lock, flags);
/*-------------------------------------------------------------------------*/
-static struct omap_udc *udc;
+static inline int machine_needs_vbus_session(void)
+{
+ return (machine_is_omap_innovator()
+ || machine_is_omap_osk()
+ || machine_is_omap_apollon()
+#ifndef CONFIG_MACH_OMAP_H4_OTG
+ || machine_is_omap_h4()
+#endif
+ || machine_is_sx1()
+ );
+}
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
// FIXME if otg, check: driver->is_otg
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
udc->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&udc->lock, flags);
+ if (udc->dc_clk != NULL)
+ omap_udc_enable_clock(1);
+
status = driver->bind (&udc->gadget);
if (status) {
DBG("bind to %s --> %d\n", driver->driver.name, status);
status = otg_set_peripheral(udc->transceiver, &udc->gadget);
if (status < 0) {
ERR("can't bind to transceiver\n");
- driver->unbind (&udc->gadget);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
+ if (driver->unbind) {
+ driver->unbind (&udc->gadget);
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
+ }
goto done;
}
} else {
/* boards that don't have VBUS sensing can't autogate 48MHz;
* can't enter deep sleep while a gadget driver is active.
*/
- if (machine_is_omap_innovator() || machine_is_omap_osk())
+ if (machine_needs_vbus_session())
omap_vbus_session(&udc->gadget, 1);
done:
+ if (udc->dc_clk != NULL)
+ omap_udc_enable_clock(0);
return status;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
if (!udc)
return -ENODEV;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
- if (machine_is_omap_innovator() || machine_is_omap_osk())
+ if (udc->dc_clk != NULL)
+ omap_udc_enable_clock(1);
+
+ if (machine_needs_vbus_session())
omap_vbus_session(&udc->gadget, 0);
if (udc->transceiver)
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
+ if (udc->dc_clk != NULL)
+ omap_udc_enable_clock(0);
DBG("unregistered driver '%s'\n", driver->driver.name);
return status;
}
case 0: return enabled ? "*6wire" : "unused";
case 1: return "4wire";
case 2: return "3wire";
- case 3: return "6wire";
+ case 3: return "6wire";
default: return "unknown";
}
}
{
u32 tmp;
u32 trans;
+ char *ctrl_name;
tmp = OTG_REV_REG;
- trans = USB_TRANSCEIVER_CTRL_REG;
- seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n",
- tmp >> 4, tmp & 0xf, trans);
+ if (cpu_is_omap24xx()) {
+ ctrl_name = "control_devconf";
+ trans = CONTROL_DEVCONF_REG;
+ } else {
+ ctrl_name = "tranceiver_ctrl";
+ trans = USB_TRANSCEIVER_CTRL_REG;
+ }
+ seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
+ tmp >> 4, tmp & 0xf, ctrl_name, trans);
tmp = OTG_SYSCON_1_REG;
seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
FOURBITS "\n", tmp,
driver_desc,
use_dma ? " (dma)" : "");
- tmp = UDC_REV_REG & 0xff;
+ tmp = UDC_REV_REG & 0xff;
seq_printf(s,
"UDC rev %d.%d, fifo mode %d, gadget %s\n"
"hmc %d, transceiver %s\n",
fifo_mode,
udc->driver ? udc->driver->driver.name : "(none)",
HMC,
- udc->transceiver ? udc->transceiver->label : "(none)");
- seq_printf(s, "ULPD control %04x req %04x status %04x\n",
- __REG16(ULPD_CLOCK_CTRL),
- __REG16(ULPD_SOFT_REQ),
- __REG16(ULPD_STATUS_REQ));
+ udc->transceiver
+ ? udc->transceiver->label
+ : ((cpu_is_omap1710() || cpu_is_omap24xx())
+ ? "external" : "(none)"));
+ if (cpu_class_is_omap1()) {
+ seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+ __REG16(ULPD_CLOCK_CTRL),
+ __REG16(ULPD_SOFT_REQ),
+ __REG16(ULPD_STATUS_REQ));
+ }
/* OTG controller registers */
if (!cpu_is_omap15xx())
dbuf = 1;
} else {
/* double-buffering "not supported" on 15xx,
- * and ignored for PIO-IN on 16xx
+ * and ignored for PIO-IN on newer chips
+ * (for more reliable behavior)
*/
- if (!use_dma || cpu_is_omap15xx())
+ if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
dbuf = 0;
switch (maxp) {
ep->bEndpointAddress = addr;
ep->bmAttributes = type;
ep->double_buf = dbuf;
- ep->udc = udc;
+ ep->udc = udc;
ep->ep.name = ep->name;
ep->ep.ops = &omap_ep_ops;
struct otg_transceiver *xceiv = NULL;
const char *type = NULL;
struct omap_usb_config *config = pdev->dev.platform_data;
+ struct clk *dc_clk;
+ struct clk *hhc_clk;
/* NOTE: "knows" the order of the resources! */
- if (!request_mem_region(pdev->resource[0].start,
+ if (!request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1,
driver_name)) {
DBG("request_mem_region failed\n");
return -EBUSY;
}
+ if (cpu_is_omap16xx()) {
+ dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
+ hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
+ BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+ /* can't use omap_udc_enable_clock yet */
+ clk_enable(dc_clk);
+ clk_enable(hhc_clk);
+ udelay(100);
+ }
+
+ if (cpu_is_omap24xx()) {
+ dc_clk = clk_get(&pdev->dev, "usb_fck");
+ hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
+ BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+ /* can't use omap_udc_enable_clock yet */
+ clk_enable(dc_clk);
+ clk_enable(hhc_clk);
+ udelay(100);
+ }
+
INFO("OMAP UDC rev %d.%d%s\n",
UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
config->otg ? ", Mini-AB" : "");
hmc = HMC_1510;
type = "(unknown)";
- if (machine_is_omap_innovator()) {
+ if (machine_is_omap_innovator() || machine_is_sx1()) {
/* just set up software VBUS detect, and then
* later rig it so we always report VBUS.
* FIXME without really sensing VBUS, we can't
}
hmc = HMC_1610;
+
+ if (cpu_is_omap24xx()) {
+ /* this could be transceiverless in one of the
+ * "we don't need to know" modes.
+ */
+ type = "external";
+ goto known;
+ }
+
switch (hmc) {
case 0: /* POWERUP DEFAULT == 0 */
case 4:
goto cleanup0;
}
}
+known:
INFO("hmc mode %d, %s transceiver\n", hmc, type);
/* a "gadget" abstracts/virtualizes the controller */
status = request_irq(pdev->resource[1].start, omap_udc_irq,
IRQF_SAMPLE_RANDOM, driver_name, udc);
if (status != 0) {
- ERR( "can't get irq %ld, err %d\n",
- pdev->resource[1].start, status);
+ ERR("can't get irq %d, err %d\n",
+ (int) pdev->resource[1].start, status);
goto cleanup1;
}
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
if (status != 0) {
- ERR( "can't get irq %ld, err %d\n",
- pdev->resource[2].start, status);
+ ERR("can't get irq %d, err %d\n",
+ (int) pdev->resource[2].start, status);
goto cleanup2;
}
#ifdef USE_ISO
status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
IRQF_DISABLED, "omap_udc iso", udc);
if (status != 0) {
- ERR("can't get irq %ld, err %d\n",
- pdev->resource[3].start, status);
+ ERR("can't get irq %d, err %d\n",
+ (int) pdev->resource[3].start, status);
goto cleanup3;
}
#endif
+ if (cpu_is_omap16xx()) {
+ udc->dc_clk = dc_clk;
+ udc->hhc_clk = hhc_clk;
+ clk_disable(hhc_clk);
+ clk_disable(dc_clk);
+ }
+
+ if (cpu_is_omap24xx()) {
+ udc->dc_clk = dc_clk;
+ udc->hhc_clk = hhc_clk;
+ /* FIXME OMAP2 don't release hhc & dc clock */
+#if 0
+ clk_disable(hhc_clk);
+ clk_disable(dc_clk);
+#endif
+ }
create_proc_file();
- device_add(&udc->gadget.dev);
- return 0;
-
+ status = device_add(&udc->gadget.dev);
+ if (!status)
+ return status;
+ /* If fail, fall through */
#ifdef USE_ISO
cleanup3:
free_irq(pdev->resource[2].start, udc);
cleanup0:
if (xceiv)
put_device(xceiv->dev);
+
+ if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+ clk_disable(hhc_clk);
+ clk_disable(dc_clk);
+ clk_put(hhc_clk);
+ clk_put(dc_clk);
+ }
+
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
+
return status;
}
if (!udc)
return -ENODEV;
+ if (udc->driver)
+ return -EBUSY;
udc->done = &done;
free_irq(pdev->resource[2].start, udc);
free_irq(pdev->resource[1].start, udc);
+ if (udc->dc_clk) {
+ if (udc->clk_requested)
+ omap_udc_enable_clock(0);
+ clk_put(udc->hhc_clk);
+ clk_put(udc->dc_clk);
+ }
+
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
unsigned ep0_reset_config:1;
unsigned ep0_setup:1;
struct completion *done;
+ struct clk *dc_clk;
+ struct clk *hhc_clk;
+ unsigned clk_requested:1;
};
/*-------------------------------------------------------------------------*/
if (!driver
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
{
struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
if (dev->got_irq) {
free_irq(IRQ_USB, dev);
#endif /* CONFIG_USB_GADGET_DUALSPEED */
.function = GS_LONG_NAME,
.bind = gs_bind,
- .unbind = __exit_p(gs_unbind),
+ .unbind = gs_unbind,
.setup = gs_setup,
.disconnect = gs_disconnect,
.driver = {
{
struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- struct usb_device *root = hcd->self.root_hub;
int ret;
if ((ret = ohci_init(ohci)) < 0)
*/
.start = ohci_at91_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.start = ohci_au1xxx_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
case PIPE_CONTROL: temp = "ctrl"; break; \
case PIPE_BULK: temp = "bulk"; break; \
case PIPE_INTERRUPT: temp = "intr"; break; \
- default: temp = "isoc"; break; \
+ default: temp = "isoc"; break; \
}; temp;})
#define pipestring(pipe) edstring(usb_pipetype(pipe))
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
(info & ED_SKIP) ? " K" : "",
(ed->hwHeadP &
cpu_to_hc32(ohci, ED_H)) ?
- " H" : "");
+ " H" : "");
size -= temp;
next += temp;
static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
- *
+ *
+ *
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
- * History:
- *
- * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
- * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
- * 2003/02/24 show registers in sysfs (Kevin Brosius)
- *
- * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
- * bandwidth accounting; if debugging, show schedules in driverfs
- * 2002/07/19 fixes to management of ED and schedule state.
- * 2002/06/09 SA-1111 support (Christopher Hoover)
- * 2002/06/01 remember frame when HC won't see EDs any more; use that info
- * to fix urb unlink races caused by interrupt latency assumptions;
- * minor ED field and function naming updates
- * 2002/01/18 package as a patch for 2.5.3; this should match the
- * 2.4.17 kernel modulo some bugs being fixed.
- *
- * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
- * from post-2.4.5 patches.
- * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
- * 2001/09/07 match PCI PM changes, errnos from Linus' tree
- * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
- * pbook pci quirks gone (please fix pbook pci sw!) (db)
- *
- * 2001/04/08 Identify version on module load (gb)
- * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
- pci_map_single (db)
- * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
- * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
- *
- * 2000/09/26 fixed races in removing the private portion of the urb
- * 2000/09/07 disable bulk and control lists when unlinking the last
- * endpoint descriptor in order to avoid unrecoverable errors on
- * the Lucent chips. (rwc@sgi)
- * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
- * urb unlink probs, indentation fixes
- * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
- * device unplugs.
- * 2000/06/28 use PCI hotplug framework, for better power management
- * and for Cardbus support (David Brownell)
- * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
- * when the controller loses power; handle UE; cleanup; ...
- *
- * v5.2 1999/12/07 URB 3rd preview,
- * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
- * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
- * i386: HUB, Keyboard, Mouse, Printer
- *
- * v4.3 1999/10/27 multiple HCs, bulk_request
- * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
- * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
- * v4.0 1999/08/18
- * v3.0 1999/06/25
- * v2.1 1999/05/09 code clean up
- * v2.0 1999/05/04
- * v1.0 1999/04/27 initial release
- *
* This file is licenced under the GPL.
*/
-
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
int i, size = 0;
unsigned long flags;
int retval = 0;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif
-
+
/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
INIT_LIST_HEAD (&urb_priv->pending);
urb_priv->length = size;
- urb_priv->ed = ed;
+ urb_priv->ed = ed;
/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
- }
+ }
spin_lock_irqsave (&ohci->lock, flags);
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
-#endif
+#endif
spin_lock_irqsave (&ohci->lock, flags);
- if (HC_IS_RUNNING(hcd->state)) {
+ if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
/* Start an OHCI controller, set the BUS operational
* resets USB and controller
- * enable interrupts
+ * enable interrupts
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, temp;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
/* also: power/overcurrent flags in roothub.a */
}
- /* Reset USB nearly "by the book". RemoteWakeupConnected was
+ /* Reset USB nearly "by the book". RemoteWakeupConnected was
* saved if boot firmware (BIOS/SMM/...) told us it's connected,
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
dl_done_list (ohci);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
}
-
+
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
finish_unlinks (ohci, ohci_frame_no(ohci));
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
+ ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state)) {
ohci_writel (ohci, ints, ®s->intrstatus);
- ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
/*-------------------------------------------------------------------------*/
static void ohci_stop (struct usb_hcd *hcd)
-{
+{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
- dma_free_coherent (hcd->self.controller,
- sizeof *ohci->hcca,
+ dma_free_coherent (hcd->self.controller,
+ sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
* recycle any "live" eds/tds (and urbs) right away.
* later, khubd disconnect processing will recycle the other state,
* (either as disconnect/reconnect, or maybe someday as a reset).
- */
+ */
spin_lock_irq(&ohci->lock);
disable (ohci);
usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
-
+
/* no EDs to remove */
ohci->ed_rm_list = NULL;
- /* empty control and bulk lists */
+ /* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;
#include "ohci-au1xxx.c"
#endif
+#ifdef CONFIG_PNX8550
+#include "ohci-pnx8550.c"
+#endif
+
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
#include "ohci-ppc-soc.c"
#endif
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under GPL
*/
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
temp = 0;
if (rh & RH_A_NPS) /* no power switching? */
temp |= 0x0002;
- if (rh & RH_A_PSM) /* per-port power switching? */
+ if (rh & RH_A_PSM) /* per-port power switching? */
temp |= 0x0001;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
temp |= 0x0010;
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
/* called from some task, normally khubd */
-static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
+static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
u32 temp;
/* spin until any current reset finishes */
for (;;) {
temp = ohci_readl (ohci, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
if (!(temp & RH_PS_PRS))
break;
udelay (500);
- }
+ }
if (!(temp & RH_PS_CCS))
break;
now = ohci_readl(ohci, &ohci->regs->fmnumber);
} while (tick_before(now, reset_done));
/* caller synchronizes using PRSC */
+
+ return 0;
}
static int ohci_hub_control (
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_RESET:
- root_port_reset (ohci, wIndex);
+ retval = root_port_reset (ohci, wIndex);
break;
default:
goto error;
CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
udelay(1000);
USBH_CMDSTATUS = OHCI_HCR;
-
+
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
retval = -EBUSY;
goto err1;
}
-
+
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
*/
.start = ohci_lh7a404_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_lh7a404_driver = {
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_lh7a404_drv_suspend, */
/*.resume = ohci_hcd_lh7a404_drv_resume, */
.driver = {
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*/
/*
- * There's basically three types of memory:
+ * OHCI deals with three types of memory:
* - data used only by the HCD ... kmalloc is fine
* - async and periodic schedules, shared by HC and HCD ... these
* need to use dma_pool or dma_alloc_coherent
* - driver buffers, read/written by HC ... the hcd glue or the
* device driver provides us with dma addresses
*
- * There's also PCI "register" data, which is memory mapped.
- * No memory seen by this driver is pagable.
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
*/
/*-------------------------------------------------------------------------*/
.reset = ohci_omap_init,
.start = ohci_omap_start,
.stop = ohci_omap_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_omap_driver = {
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_omap_suspend,
.resume = ohci_omap_resume,
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
+ *
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
-
+
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
pci_dev_put(b);
}
- /* Check for Compaq's ZFMicro chipset, which needs short
+ /* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
.shutdown = usb_hcd_pci_shutdown,
};
-
-static int __init ohci_hcd_pci_init (void)
+
+static int __init ohci_hcd_pci_init (void)
{
printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
if (usb_disabled())
/*-------------------------------------------------------------------------*/
-static void __exit ohci_hcd_pci_cleanup (void)
-{
+static void __exit ohci_hcd_pci_cleanup (void)
+{
pci_unregister_driver (&ohci_pci_driver);
}
module_exit (ohci_hcd_pci_cleanup);
* driver for Philips PNX4008 USB Host
*
* Authors: Dmitry Chigirev <source@mvista.com>
- * Vitaly Wool <vitalywool@gmail.com>
+ * Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
-#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ *
+ * Bus Glue for PNX8550
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ * by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
+ * by Vitaly Wool <vitalywool@gmail.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/mach-pnx8550/usb.h>
+#include <asm/mach-pnx8550/int.h>
+#include <asm/mach-pnx8550/pci.h>
+
+#ifndef CONFIG_PNX8550
+#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined."
+#endif
+
+extern int usb_disabled(void);
+
+/*-------------------------------------------------------------------------*/
+
+static void pnx8550_start_hc(struct platform_device *dev)
+{
+ /*
+ * Set register CLK48CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x0004770c);
+
+ /*
+ * Set register CLK12CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x00047710);
+
+ udelay(100);
+}
+
+static void pnx8550_stop_hc(struct platform_device *dev)
+{
+ udelay(10);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
+ struct platform_device *dev)
+{
+ int retval;
+ struct usb_hcd *hcd;
+
+ if (dev->resource[0].flags != IORESOURCE_MEM ||
+ dev->resource[1].flags != IORESOURCE_IRQ) {
+ dev_err (&dev->dev,"invalid resource type\n");
+ return -ENOMEM;
+ }
+
+ hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = dev->resource[0].start;
+ hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
+ "failed\n", hcd->rsrc_start, hcd->rsrc_len);
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
+ hcd->rsrc_start, hcd->rsrc_len);
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ pnx8550_start_hc(dev);
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
+
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+ usb_remove_hcd(hcd);
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __devinit
+ohci_pnx8550_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+ ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run (ohci)) < 0) {
+ err ("can't start %s", hcd->self.bus_name);
+ ohci_stop (hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_pnx8550_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "PNX8550 OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_pnx8550_start,
+ .stop = ohci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
+ return ret;
+}
+
+static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_hcd_pnx8550_remove(hcd, pdev);
+ return 0;
+}
+
+MODULE_ALIAS("pnx8550-ohci");
+
+static struct platform_driver ohci_hcd_pnx8550_driver = {
+ .driver = {
+ .name = "pnx8550-ohci",
+ },
+ .probe = ohci_hcd_pnx8550_drv_probe,
+ .remove = ohci_hcd_pnx8550_drv_remove,
+};
+
+static int __init ohci_hcd_pnx8550_init (void)
+{
+ pr_debug (DRIVER_INFO " (pnx8550)");
+ pr_debug ("block sizes: ed %d td %d\n",
+ sizeof (struct ed), sizeof (struct td));
+
+ return platform_driver_register(&ohci_hcd_pnx8550_driver);
+}
+
+static void __exit ohci_hcd_pnx8550_cleanup (void)
+{
+ platform_driver_unregister(&ohci_hcd_pnx8550_driver);
+}
+
+module_init (ohci_hcd_pnx8550_init);
+module_exit (ohci_hcd_pnx8550_cleanup);
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
* (C) Copyright 2003-2005 MontaVista Software Inc.
- *
+ *
* Bus Glue for PPC On-Chip OHCI driver
* Tested on Freescale MPC5200 and IBM STB04xxx
*
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
- usb_put_hcd(hcd);
+ usb_put_hcd(hcd);
return retval;
}
*/
.start = ohci_ppc_soc_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_ppc_soc_driver = {
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
- break;
+ break;
case PMM_GLOBAL_MODE:
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
break;
break;
default:
printk( KERN_ERR
- "Invalid mode %d, set to non-power switch mode.\n",
+ "Invalid mode %d, set to non-power switch mode.\n",
mode );
UHCRHDA |= RH_A_NPS;
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
#endif
.driver = {
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*
* ED handling functions
- *-------------------------------------------------------------------------*/
+ *-------------------------------------------------------------------------*/
/* search for the right schedule branch to use for a periodic ed.
* does some load balancing; returns the branch, or negative errno.
*/
for (i = 0; i < interval ; i++) {
if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
-#if 1 /* CONFIG_USB_BANDWIDTH */
int j;
/* usb 1.1 says 90% of one frame */
}
if (j < NUM_INTS)
continue;
-#endif
- branch = i;
+ branch = i;
}
}
return branch;
/* link an ed into one of the HC chains */
static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
int branch;
if (ohci_to_hcd(ohci)->state == HC_STATE_QUIESCING)
}
ed->branch = branch;
periodic_link (ohci, ed);
- }
+ }
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
*prev = ed->ed_next;
}
ohci->load [i] -= ed->load;
- }
+ }
ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
ed, ed->branch, ed->load, ed->interval);
}
-/* unlink an ed from one of the HC chains.
+/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed
* When finish_unlinks() runs later, after SOF interrupt, it will often
* complete one or more URB unlinks before making that state change.
*/
-static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
+static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
unsigned int pipe,
int interval
) {
- struct ed *ed;
+ struct ed *ed;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
goto done;
}
- /* dummy td; end of td list for ed */
+ /* dummy td; end of td list for ed */
td = td_alloc (ohci, GFP_ATOMIC);
- if (!td) {
+ if (!td) {
/* out of memory */
ed_free (ohci, ed);
ed = NULL;
done:
spin_unlock_irqrestore (&ohci->lock, flags);
- return ed;
+ return ed;
}
/*-------------------------------------------------------------------------*/
* and that ed->state is ED_OPER
*/
static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
td->ed = urb_priv->ed;
td->next_dl_td = NULL;
td->index = index;
- td->urb = urb;
+ td->urb = urb;
td->data_dma = data;
if (!len)
data = 0;
(data & 0x0FFF) | 0xE000);
td->ed->last_iso = info & 0xffff;
} else {
- td->hwCBP = cpu_to_hc32 (ohci, data);
- }
+ td->hwCBP = cpu_to_hc32 (ohci, data);
+ }
if (data)
td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
else
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
- if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
+ if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
- if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ if (tdINFO & TD_ISO) {
+ u16 tdPSW = ohci_hwPSW (ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
- cc = (tdPSW >> 12) & 0xF;
- if (tdINFO & TD_CC) /* hc didn't touch? */
+ cc = (tdPSW >> 12) & 0xF;
+ if (tdINFO & TD_CC) /* hc didn't touch? */
return;
if (usb_pipeout (urb->pipe))
int type = usb_pipetype (urb->pipe);
u32 tdBE = hc32_to_cpup (ohci, &td->hwBE);
- cc = TD_CC_GET (tdINFO);
+ cc = TD_CC_GET (tdINFO);
/* update packet status if needed (short is normally ok) */
if (cc == TD_DATAUNDERRUN
urb, td, 1 + td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
- }
+ }
}
/*-------------------------------------------------------------------------*/
static inline struct td *
ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
{
- struct urb *urb = td->urb;
+ struct urb *urb = td->urb;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
*/
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
- ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
+ ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
/* put any later tds from this urb onto the donelist, after 'td',
* order won't matter here: no errors, and nothing was transferred.
info &= ~cpu_to_hc32 (ohci, TD_CC);
next->hwINFO = info;
- next->next_dl_td = rev;
+ next->next_dl_td = rev;
rev = next;
ed->hwHeadP = next->hwNextTD | toggle;
/* get TD from hc's singly linked list, and
* prepend to ours. ed->td_list changes later.
*/
- while (td_dma) {
- int cc;
+ while (td_dma) {
+ int cc;
td = dma_to_td (ohci, td_dma);
if (!td) {
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
td_rev = ed_halted (ohci, td, cc, td_rev);
- td->next_dl_td = td_rev;
+ td->next_dl_td = td_rev;
td_rev = td;
td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
- }
+ }
return td_rev;
}
if (modified)
goto rescan_all;
- }
+ }
- /* maybe reenable control and bulk lists */
+ /* maybe reenable control and bulk lists */
if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
&& !ohci->ed_rm_list) {
&ohci->regs->ed_bulkcurrent);
}
}
-
+
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, ohci->hc_control,
- &ohci->regs->control);
- }
+ ohci_writel (ohci, ohci->hc_control,
+ &ohci->regs->control);
+ }
if (command) {
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, command, &ohci->regs->cmdstatus);
- }
+ ohci_writel (ohci, command, &ohci->regs->cmdstatus);
+ }
}
}
{
struct td *td = dl_reverse_done_list (ohci);
- while (td) {
+ while (td) {
struct td *td_next = td->next_dl_td;
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
/* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
+ td_done (ohci, urb, td);
+ urb_priv->td_cnt++;
/* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb (ohci, urb);
/* clean schedule: unlink EDs that are no longer busy */
if (list_empty (&ed->td_list)) {
start_ed_unlink (ohci, ed);
/* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE))
+ } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
+ ED_SKIP | ED_DEQUEUE))
== cpu_to_hc32 (ohci, ED_SKIP)) {
td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
+ if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
/* ... hc may need waking-up */
switch (ed->type) {
case PIPE_CONTROL:
ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
case PIPE_BULK:
ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
}
}
}
- td = td_next;
- }
+ td = td_next;
+ }
}
*/
.start = ohci_s3c2410_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
/*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
*
* This file is licenced under the GPL.
*/
-
+
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/assabet.h>
{
unsigned int usb_rst = 0;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": starting SA-1111 OHCI USB Controller\n");
#ifdef CONFIG_SA1100_BADGE4
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": stopping SA-1111 OHCI USB Controller\n");
/*
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
*/
typedef __u32 __bitwise __hc32;
typedef __u16 __bitwise __hc16;
-
+
/*
* OHCI Endpoint Descriptor (ED) ... holds TD queue
* See OHCI spec, section 4.2
*/
struct ed {
/* first fields are hardware-specified */
- __hc32 hwINFO; /* endpoint config bitmap */
+ __hc32 hwINFO; /* endpoint config bitmap */
/* info bits defined by hcd */
#define ED_DEQUEUE (1 << 27)
/* info bits defined by the hardware */
* usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
*/
u8 state; /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 0x00 /* NOT linked to HC */
-#define ED_UNLINK 0x01 /* being unlinked from hc */
+#define ED_IDLE 0x00 /* NOT linked to HC */
+#define ED_UNLINK 0x01 /* being unlinked from hc */
#define ED_OPER 0x02 /* IS linked to hc */
- u8 type; /* PIPE_{BULK,...} */
+ u8 type; /* PIPE_{BULK,...} */
/* periodic scheduling params (for intr and iso) */
u8 branch;
#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
-
+
/*
* OHCI Transfer Descriptor (TD) ... one per transfer segment
* See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
/* (no hwINFO #defines yet for iso tds) */
- __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
- __hc32 hwNextTD; /* Next TD Pointer */
- __hc32 hwBE; /* Memory Buffer End Pointer */
+ __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
+ __hc32 hwNextTD; /* Next TD Pointer */
+ __hc32 hwBE; /* Memory Buffer End Pointer */
/* PSW is only for ISO. Only 1 PSW entry is used, but on
* big-endian PPC hardware that's the second entry.
*/
#define MAXPSW 2
- __hc16 hwPSW [MAXPSW];
+ __hc16 hwPSW [MAXPSW];
/* rest are purely for the driver's use */
- __u8 index;
- struct ed *ed;
- struct td *td_hash; /* dma-->td hashtable */
- struct td *next_dl_td;
- struct urb *urb;
+ __u8 index;
+ struct ed *ed;
+ struct td *td_hash; /* dma-->td hashtable */
+ struct td *next_dl_td;
+ struct urb *urb;
dma_addr_t td_dma; /* addr of this TD */
dma_addr_t data_dma; /* addr of data it points to */
#define TD_NOTACCESSED 0x0F
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
/* No Error */ 0,
/* CRC Error */ -EILSEQ,
/* Bit Stuff */ -EPROTO,
/* BufferOver */ -ECOMM,
/* BuffUnder */ -ENOSR,
/* (for HCD) */ -EALREADY,
- /* (for HCD) */ -EALREADY
+ /* (for HCD) */ -EALREADY
};
#define NUM_INTS 32
__hc32 int_table [NUM_INTS]; /* periodic schedule */
- /*
+ /*
* OHCI defines u16 frame_no, followed by u16 zero pad.
* Since some processors can't do 16 bit bus accesses,
* portable access must be a 32 bits wide.
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
/* OHCI ROOT HUB REGISTER MASKS */
-
+
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
#define RH_HS_LPS 0x00000001 /* local power status */
} urb_priv_t;
#define TD_HASH_SIZE 64 /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ...
+// sizeof (struct td) ~= 64 == 2^6 ...
#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
struct ed *ed_bulktail; /* last in bulk list */
struct ed *ed_controltail; /* last in ctrl list */
- struct ed *periodic [NUM_INTS]; /* shadow int_table */
+ struct ed *periodic [NUM_INTS]; /* shadow int_table */
/*
* OTG controllers and transceivers need software interaction;
- * other external transceivers should be software-transparent
+ * other external transceivers should be software-transparent
*/
struct otg_transceiver *transceiver;
*/
int num_ports;
int load [NUM_INTS];
- u32 hc_control; /* copy of hc control reg */
+ u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
unsigned autostop:1; /* rh auto stopping/stopped */
}
#define FI 0x2edf /* 12000 bits per frame (-1) */
-#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
#define FIT (1 << 31)
#define LSTHRESH 0x628 /* lowspeed bit threshold */
-static void periodic_reinit (struct ohci_hcd *ohci)
+static inline void periodic_reinit (struct ohci_hcd *ohci)
{
u32 fi = ohci->fminterval & 0x03fff;
u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
temp = ohci_readl (hc, &hc->regs->roothub.register); \
temp; })
-static u32 roothub_a (struct ohci_hcd *hc)
+static inline u32 roothub_a (struct ohci_hcd *hc)
{ return read_roothub (hc, a, 0xfc0fe000); }
static inline u32 roothub_b (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.b); }
static inline u32 roothub_status (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
+static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/pci_ids.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
* these cannot be inlines because we need the structure offset!!
* Does anyone have a better way?????
*/
+#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
#define u132_read_pcimem(u132, member, data) \
usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
#define u132_write_pcimem(u132, member, data) \
usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
-#define u132_write_pcimem_byte(u132, member, data) \
- usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
- ohci_regs, member), 0x0e, data);
static inline struct u132 *udev_to_u132(struct u132_udev *udev)
{
u8 udev_number = udev->udev_number;
return "?";
}
-static int u132_usb_reset(struct u132 *u132)
-{
- int retval;
- retval = u132_read_pcimem(u132, control, &u132->hc_control);
- if (retval)
- return retval;
- u132->hc_control &= OHCI_CTRL_RWC;
- retval = u132_write_pcimem(u132, control, u132->hc_control);
- if (retval)
- return retval;
- return 0;
-}
-
static int u132_init(struct u132 *u132)
{
int retval;
u32 control;
u132_disable(u132);
- u132->next_statechange =
- jiffies; /* SMM owns the HC? not for long! */ {
- u32 control;
- retval = u132_read_pcimem(u132, control, &control);
- if (retval)
- return retval;
- if (control & OHCI_CTRL_IR) {
- u32 temp = 50;
- retval = u132_write_pcimem(u132, intrenable,
- OHCI_INTR_OC);
- if (retval)
- return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus,
- OHCI_OCR);
- if (retval)
- return retval;
- check:{
- retval = u132_read_pcimem(u132, control,
- &control);
- if (retval)
- return retval;
- }
- if (control & OHCI_CTRL_IR) {
- msleep(10);
- if (--temp == 0) {
- dev_err(&u132->platform_dev->dev, "USB "
- "HC takeover failed!(BIOS/SMM b"
- "ug) control=%08X\n", control);
- return -EBUSY;
- }
- goto check;
- }
- u132_usb_reset(u132);
- }
- }
+ u132->next_statechange = jiffies;
retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
if (retval)
return retval;
retry:retval = u132_read_pcimem(u132, cmdstatus, &status);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR);
if (retval)
return retval;
extra:{
retval = u132_write_pcimem(u132, control, u132->hc_control);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF);
if (retval)
return retval;
retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 1) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b"
+ "een removed %d\n", u132, hcd, u132->going);
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 2) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p"
+ ") has been removed %d\n", u132, hcd, hep,
+ u132->going);
} else {
struct u132_endp *endp = hep->hcpriv;
if (endp)
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
- dump_stack();
return -ESHUTDOWN;
} else {
int i, changed = 0, length = 1;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd) {
struct u132 *u132 = hcd_to_u132(hcd);
- dump_stack();
if (u132->going++ > 1) {
+ dev_err(&u132->platform_dev->dev, "already being remove"
+ "d\n");
return -ENODEV;
} else {
int rings = MAX_U132_RINGS;
int endps = MAX_U132_ENDPS;
+ dev_err(&u132->platform_dev->dev, "removing device u132"
+ ".%d\n", u132->sequence_num);
msleep(100);
down(&u132->sw_lock);
u132_monitor_cancel_work(u132);
static int __devinit u132_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
+ int retval;
+ u32 control;
+ u32 rh_a = -1;
+ u32 num_ports;
msleep(100);
if (u132_exiting > 0) {
return -ENODEV;
- } /* refuse to confuse usbcore */
+ }
+ retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP; /* refuse to confuse usbcore */
if (pdev->dev.dma_mask) {
return -EINVAL;
}
Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
+
/*
* debug = 0, no debugging messages
* debug = 1, dump failed URBs except for stalls
{
int port;
+ /* If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts. */
+ if (ignore_oc)
+ return 1;
+
switch (to_pci_dev(uhci_dev(uhci))->vendor) {
default:
break;
static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
{
- static struct dmi_system_id broken_wakeup_table[] = {
- {
- .ident = "Asus A7V8X",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK"),
- DMI_MATCH(DMI_BOARD_NAME, "A7V8X"),
- DMI_MATCH(DMI_BOARD_VERSION, "REV 1.xx"),
- }
- },
- { }
- };
int port;
+ char *sys_info;
+ static char bad_Asus_board[] = "A7V8X";
/* One of Asus's motherboards has a bug which causes it to
* wake up immediately from suspend-to-RAM if any of the ports
* are connected. In such cases we will not set EGSM.
*/
- if (dmi_check_system(broken_wakeup_table)) {
+ sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+ if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
for (port = 0; port < uhci->rh_numports; ++port) {
if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
USBPORTSC_CCS)
int_enable = USBINTR_RESUME;
if (remote_wakeup_is_broken(uhci))
egsm_enable = 0;
- if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable)
+ if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+ !device_may_wakeup(
+ &uhci_to_hcd(uhci)->self.root_hub->dev))
uhci->working_RD = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
{
int retval = -ENOMEM;
- printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n",
+ ignore_oc ? ", overcurrent ignored" : "");
if (usb_disabled())
return -ENODEV;
static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
{
int port;
+ int mask = RWC_BITS;
+
+ /* Some boards (both VIA and Intel apparently) report bogus
+ * overcurrent indications, causing massive log spam unless
+ * we completely ignore them. This doesn't seem to be a problem
+ * with the chipset so much as with the way it is connected on
+ * the motherboard; if the overcurrent input is left to float
+ * then it may constantly register false positives. */
+ if (ignore_oc)
+ mask &= ~USBPORTSC_OCC;
*buf = 0;
for (port = 0; port < uhci->rh_numports; ++port) {
- if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
+ if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & mask) ||
test_bit(port, &uhci->port_c_suspend))
*buf |= (1 << (port + 1));
}
wPortChange |= USB_PORT_STAT_C_CONNECTION;
if (status & USBPORTSC_PEC)
wPortChange |= USB_PORT_STAT_C_ENABLE;
- if (status & USBPORTSC_OCC)
+ if ((status & USBPORTSC_OCC) && !ignore_oc)
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
if (test_bit(port, &uhci->port_c_suspend)) {
config USB_HID
tristate "USB Human Interface Device (full HID) support"
default y
- depends on USB && HID
+ depends on USB && INPUT
+ select HID
---help---
Say Y here if you want full HID support to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
- to your computer via USB. You also need to select HID Input layer
- support (below) if you want to use keyboards, mice, joysticks and
- the like ... as well as Uninterruptible Power Supply (UPS) and
- monitor control devices.
+ to your computer via USB, as well as Uninterruptible Power Supply
+ (UPS) and monitor control devices.
You can't use this driver and the HIDBP (Boot Protocol) keyboard
and mouse drivers at the same time. More information is available:
comment "Input core support is needed for USB HID input layer or HIDBP support"
depends on USB_HID && INPUT=n
-config USB_HID_POWERBOOK
+config USB_HIDINPUT_POWERBOOK
bool "Enable support for iBook/PowerBook special keys"
default n
depends on USB_HID
if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "clear halt\n");
- rc = usb_clear_halt(to_usb_device(hid->dev), usbhid->urbin->pipe);
+ rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
hid_start_in(hid);
}
else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "resetting device\n");
- rc = rc_lock = usb_lock_device_for_reset(to_usb_device(hid->dev), usbhid->intf);
+ rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
if (rc_lock >= 0) {
- rc = usb_reset_composite_device(to_usb_device(hid->dev), usbhid->intf);
+ rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
if (rc_lock)
- usb_unlock_device(to_usb_device(hid->dev));
+ usb_unlock_device(hid_to_usb_dev(hid));
}
clear_bit(HID_RESET_PENDING, &usbhid->iofl);
}
break;
default:
err("can't reset device, %s-%s/input%d, status %d",
- to_usb_device(hid->dev)->bus->bus_name,
- to_usb_device(hid->dev)->devpath,
+ hid_to_usb_dev(hid)->bus->bus_name,
+ hid_to_usb_dev(hid)->devpath,
usbhid->ifnum, rc);
/* FALLTHROUGH */
case -EHOSTUNREACH:
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
if (status != -EPERM) {
err("can't resubmit intr, %s-%s/input%d, status %d",
- to_usb_device(hid->dev)->bus->bus_name,
- to_usb_device(hid->dev)->devpath,
+ hid_to_usb_dev(hid)->bus->bus_name,
+ hid_to_usb_dev(hid)->devpath,
usbhid->ifnum, status);
hid_io_error(hid);
}
hid_output_report(report, usbhid->outbuf);
usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
- usbhid->urbout->dev = to_usb_device(hid->dev);
+ usbhid->urbout->dev = hid_to_usb_dev(hid);
dbg("submitting out urb");
len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
if (dir == USB_DIR_OUT) {
hid_output_report(report, usbhid->ctrlbuf);
- usbhid->urbctrl->pipe = usb_sndctrlpipe(to_usb_device(hid->dev), 0);
+ usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
usbhid->urbctrl->transfer_buffer_length = len;
} else {
int maxpacket, padlen;
- usbhid->urbctrl->pipe = usb_rcvctrlpipe(to_usb_device(hid->dev), 0);
- maxpacket = usb_maxpacket(to_usb_device(hid->dev), usbhid->urbctrl->pipe, 0);
+ usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
+ maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
if (maxpacket > 0) {
padlen = (len + maxpacket - 1) / maxpacket;
padlen *= maxpacket;
padlen = 0;
usbhid->urbctrl->transfer_buffer_length = padlen;
}
- usbhid->urbctrl->dev = to_usb_device(hid->dev);
+ usbhid->urbctrl->dev = hid_to_usb_dev(hid);
usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
}
#define USB_VENDOR_ID_GTCO 0x078c
+#define USB_VENDOR_ID_GTCO_IPANEL_1 0x08ca
+#define USB_VENDOR_ID_GTCO_IPANEL_2 0x5543
#define USB_DEVICE_ID_GTCO_90 0x0090
#define USB_DEVICE_ID_GTCO_100 0x0100
#define USB_DEVICE_ID_GTCO_101 0x0101
#define USB_DEVICE_ID_GTCO_1004 0x1004
#define USB_DEVICE_ID_GTCO_1005 0x1005
#define USB_DEVICE_ID_GTCO_1006 0x1006
+#define USB_DEVICE_ID_GTCO_10 0x0010
+#define USB_DEVICE_ID_GTCO_8 0x0008
+#define USB_DEVICE_ID_GTCO_d 0x000d
#define USB_VENDOR_ID_WACOM 0x056a
#define USB_VENDOR_ID_LOGITECH 0x046d
#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101
+#define USB_VENDOR_ID_IMATION 0x0718
+#define USB_DEVICE_ID_DISC_STAKKA 0xd000
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GTCO_IPANEL_1, USB_DEVICE_ID_GTCO_10, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
hid->version = le16_to_cpu(hdesc->bcdHID);
hid->country = hdesc->bCountryCode;
- hid->dev = &dev->dev;
+ hid->dev = &intf->dev;
usbhid->intf = intf;
usbhid->ifnum = interface->desc.bInterfaceNumber;
usb_free_urb(usbhid->urbctrl);
usb_free_urb(usbhid->urbout);
- hid_free_buffers(to_usb_device(hid->dev), hid);
+ hid_free_buffers(hid_to_usb_dev(hid), hid);
hid_free_device(hid);
}
#include <linux/usb.h>
#include <linux/hid.h>
+#include "usbhid.h"
/*
* This table contains pointers to initializers. To add support for new
int hid_ff_init(struct hid_device* hid)
{
struct hid_ff_initializer *init;
- int vendor = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idVendor);
- int product = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idProduct);
+ int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
+ int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
for (init = inits; init->idVendor; init++)
if (init->idVendor == vendor && init->idProduct == product)
struct hiddev_list *list = file->private_data;
struct hiddev *hiddev = list->hiddev;
struct hid_device *hid = hiddev->hid;
- struct usb_device *dev = to_usb_device(hid->dev);
+ struct usb_device *dev = hid_to_usb_dev(hid);
struct hiddev_collection_info cinfo;
struct hiddev_report_info rinfo;
struct hiddev_field_info finfo;
};
+#define hid_to_usb_dev(hid_dev) \
+ container_of(hid_dev->dev->parent, struct usb_device, dev)
+
#endif
void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
int (*get_pkt_len) (unsigned char *pkt, int len);
- int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+ int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
int (*init) (struct usbtouch_usb *usbtouch);
};
struct usbtouch_device_info *type;
char name[128];
char phys[64];
+
+ int x, y;
+ int touch, press;
};
#define EGALAX_PKT_TYPE_REPT 0x80
#define EGALAX_PKT_TYPE_DIAG 0x0A
-static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
return 0;
- *x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
- *y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
- *touch = pkt[0] & 0x01;
+ dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+ dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+ dev->touch = pkt[0] & 0x01;
return 1;
}
* PanJit Part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
-static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- *x = ((pkt[2] & 0x0F) << 8) | pkt[1];
- *y = ((pkt[4] & 0x0F) << 8) | pkt[3];
- *touch = pkt[0] & 0x01;
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
return 1;
}
#define MTOUCHUSB_RESET 7
#define MTOUCHUSB_REQ_CTRLLR_ID 10
-static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- *x = (pkt[8] << 8) | pkt[7];
- *y = (pkt[10] << 8) | pkt[9];
- *touch = (pkt[2] & 0x40) ? 1 : 0;
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
}
* ITM Part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_ITM
-static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
- *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
- *press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
- *touch = ~pkt[7] & 0x20;
+ int touch;
+ /*
+ * ITM devices report invalid x/y data if not touched.
+ * if the screen was touched before but is not touched any more
+ * report touch as 0 with the last valid x/y data once. then stop
+ * reporting data until touched again.
+ */
+ dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+ touch = ~pkt[7] & 0x20;
+ if (!touch) {
+ if (dev->touch) {
+ dev->touch = 0;
+ return 1;
+ }
- return *touch;
+ return 0;
+ }
+
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ dev->touch = touch;
+
+ return 1;
}
#endif
* eTurboTouch part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
-static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
return 0;
shift = (6 - (pkt[0] & 0x03));
- *x = ((pkt[3] << 7) | pkt[4]) >> shift;
- *y = ((pkt[1] << 7) | pkt[2]) >> shift;
- *touch = (pkt[0] & 0x10) ? 1 : 0;
+ dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+ dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+ dev->touch = (pkt[0] & 0x10) ? 1 : 0;
return 1;
}
* Gunze part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
-static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
return 0;
- *x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
- *y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
- *touch = pkt[0] & 0x20;
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->touch = pkt[0] & 0x20;
return 1;
}
}
-static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- *x = ((pkt[2] & 0x03) << 8) | pkt[1];
- *y = ((pkt[4] & 0x03) << 8) | pkt[3];
- *touch = pkt[0] & 0x01;
+ dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
return 1;
}
static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
- int x, y, touch, press;
struct usbtouch_device_info *type = usbtouch->type;
- if (!type->read_data(pkt, &x, &y, &touch, &press))
+ if (!type->read_data(usbtouch, pkt))
return;
- input_report_key(usbtouch->input, BTN_TOUCH, touch);
+ input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
if (swap_xy) {
- input_report_abs(usbtouch->input, ABS_X, y);
- input_report_abs(usbtouch->input, ABS_Y, x);
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
} else {
- input_report_abs(usbtouch->input, ABS_X, x);
- input_report_abs(usbtouch->input, ABS_Y, y);
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
}
if (type->max_press)
- input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+ input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
input_sync(usbtouch->input);
}
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
- input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
}
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
}
- }
-
- if (data[1] & 0x10)
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ }
else
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
- wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10);
+
+ if (data[1] & 0x10) /* only report prox-in when in area */
+ wacom_report_key(wcombo, wacom->tool[0], 1);
+ if (!(data[1] & 0x90)) /* report prox-out when physically out */
+ wacom_report_key(wcombo, wacom->tool[0], 0);
wacom_input_sync(wcombo);
/* send pad data */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return 0;
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
if (data[1] & 0x02) {
/* Rotation packet */
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
/* I3 marker pen rotation reported as wheel
* due to valuator limitation
*/
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 },
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
- { "Wacom Volito", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom PenStation2", 8, 3250, 2320, 255, 0, GRAPHIRE },
- { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 0, GRAPHIRE },
- { "Wacom PenPartner2", 8, 3250, 2320, 255, 0, GRAPHIRE },
+ { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS },
{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 15, INTUOS3S },
+ { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ }
/* Register backlight device */
snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
atomic_inc_return(&count_displays) - 1);
- pdata->bd = backlight_device_register(bl_name, pdata,
+ pdata->bd = backlight_device_register(bl_name, NULL, NULL,
&appledisplay_bl_data);
if (IS_ERR(pdata->bd)) {
err("appledisplay: Backlight registration failed");
}
/* we have access to the device. Now lets allocate memory */
- ccp = (pauerchar_t) kmalloc(sizeof(auerchar_t), GFP_KERNEL);
+ ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
if (ccp == NULL) {
err ("out of memory");
ret = -ENOMEM;
}
/* Initialize device descriptor */
- memset( ccp, 0, sizeof(auerchar_t));
init_MUTEX( &ccp->mutex);
init_MUTEX( &ccp->readmutex);
auerbuf_init (&ccp->bufctl);
return -ENODEV;
/* allocate memory for our device and initialize it */
- cp = kmalloc (sizeof(auerswald_t), GFP_KERNEL);
+ cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
if (cp == NULL) {
err ("out of memory");
goto pfail;
}
/* Initialize device descriptor */
- memset (cp, 0, sizeof(auerswald_t));
init_MUTEX (&cp->mutex);
cp->usbdev = usbdev;
auerchain_init (&cp->controlchain);
#include <linux/init.h>
#include <linux/list.h>
#include <linux/ioctl.h>
+#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
MODULE_DESCRIPTION("FTDI ELAN driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+static int distrust_firmware = 1;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
+ "t setup");
extern struct platform_driver u132_platform_driver;
static struct workqueue_struct *status_queue;
static struct workqueue_struct *command_queue;
* end of the global variables protected by ftdi_module_lock
*/
#include "usb_u132.h"
-#define TD_DEVNOTRESP 5
+#include <asm/io.h>
+#include "../core/hcd.h"
+#include "../host/ohci.h"
/* Define these values to match your devices*/
#define USB_FTDI_ELAN_VENDOR_ID 0x0403
#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
} else {
dev_err(&ftdi->udev->dev, "initialized failed - trying "
"again in 10 seconds\n");
- work_delay_in_msec = 10 *1000;
+ work_delay_in_msec = 1 *1000;
}
} else if (ftdi->registered == 0) {
work_delay_in_msec = 10;
}
}
-static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+
+#define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define OHCI_QUIRK_AMD756 0x01
+#define OHCI_QUIRK_SUPERIO 0x02
+#define OHCI_QUIRK_INITRESET 0x04
+#define OHCI_BIG_ENDIAN 0x08
+#define OHCI_QUIRK_ZFMICRO 0x10
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
+ OHCI_INTR_WDH)
+static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk)
+{
+ int devices = 0;
+ int retval;
+ u32 hc_control;
+ int num_ports;
+ u32 control;
+ u32 rh_a = -1;
+ u32 status;
+ u32 fminterval;
+ u32 hc_fminterval;
+ u32 periodicstart;
+ u32 cmdstatus;
+ u32 roothub_a;
+ int mask = OHCI_INTR_INIT;
+ int sleep_time = 0;
+ int reset_timeout = 30; /* ... allow extra time */
+ int temp;
+ retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval);
+ if (retval)
+ return retval;
+ hc_fminterval &= 0x3fff;
+ if (hc_fminterval != FI) {
+ }
+ hc_fminterval |= FSMP(hc_fminterval) << 16;
+ retval = ftdi_read_pcimem(ftdi, control, &hc_control);
+ if (retval)
+ return retval;
+ switch (hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ sleep_time = 0;
+ break;
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESUME;
+ sleep_time = 10;
+ break;
+ default:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESET;
+ sleep_time = 50;
+ break;
+ }
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ msleep(sleep_time);
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ if (!(roothub_a & RH_A_NPS)) { /* power down each port */
+ for (temp = 0; temp < num_ports; temp++) {
+ retval = ftdi_write_pcimem(ftdi,
+ roothub.portstatus[temp], RH_PS_LSDA);
+ if (retval)
+ return retval;
+ }
+ }
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR);
+ if (retval)
+ return retval;
+ extra:{
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ if (0 != (status & OHCI_HCR)) {
+ if (--reset_timeout == 0) {
+ dev_err(&ftdi->udev->dev, "USB HC reset timed o"
+ "ut!\n");
+ return -ENODEV;
+ } else {
+ msleep(5);
+ goto extra;
+ }
+ }
+ }
+ if (quirk & OHCI_QUIRK_INITRESET) {
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, fminterval,
+ ((fminterval & FIT) ^ FIT) | hc_fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, periodicstart,
+ ((9 *hc_fminterval) / 10) & 0x3fff);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart);
+ if (retval)
+ return retval;
+ if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+ if (!(quirk & OHCI_QUIRK_INITRESET)) {
+ quirk |= OHCI_QUIRK_INITRESET;
+ goto retry;
+ } else
+ dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n",
+ fminterval, periodicstart);
+ } /* start controller operations */
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrstatus, mask);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrdisable,
+ OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+ OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+ OHCI_INTR_SO);
+ if (retval)
+ return retval; /* handle root hub init quirks ... */
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+ if (quirk & OHCI_QUIRK_SUPERIO) {
+ roothub_a |= RH_A_NOCP;
+ roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) {
+ roothub_a |= RH_A_NPS;
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.b,
+ (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ mdelay((roothub_a >> 23) & 0x1fe);
+ for (temp = 0; temp < num_ports; temp++) {
+ u32 portstatus;
+ retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp],
+ &portstatus);
+ if (retval)
+ return retval;
+ if (1 & portstatus)
+ devices += 1;
+ }
+ return devices;
+}
+
+static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn)
{
u32 latence_timer;
- u32 controlreg;
int UxxxStatus;
u32 pcidata;
int reg = 0;
- int foundOHCI = 0;
- u8 fn;
- int activePCIfn = 0;
- u32 pciVID = 0;
- u32 pciPID = 0;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
- if (UxxxStatus)
- return UxxxStatus;
- msleep(750);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ int activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ reg = 16;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xFFFFFFFF);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xF0000000);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- msleep(250);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ reg = 12;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &latence_timer);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ latence_timer &= 0xFFFF00FF;
+ latence_timer |= 0x00001600;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ latence_timer);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ reg = 4;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ 0x06);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- msleep(1000);
- for (fn = 0; (fn < 4) && (!foundOHCI); fn++) {
- activePCIfn = fn << 8;
- ftdi->function = fn + 1;
- UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
- &pcidata);
+ for (reg = 0; reg <= 0x54; reg += 4) {
+ UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
if (UxxxStatus)
return UxxxStatus;
- pciVID = pcidata & 0xFFFF;
- pciPID = (pcidata >> 16) & 0xFFFF;
- if ((pciVID == 0x1045) && (pciPID == 0xc861)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) {
- }
- }
- if (foundOHCI == 0) {
- return -ENXIO;
}
- ftdi->platform_data.vendor = pciVID;
- ftdi->platform_data.device = pciPID;
+ return 0;
+}
+
+static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn)
+{
+ u32 latence_timer;
+ int UxxxStatus;
+ u32 pcidata;
+ int reg = 0;
+ int activePCIfn = fn << 8;
UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
if (UxxxStatus)
return UxxxStatus;
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
- 0xF0000000);
+ 0x00000000);
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
return UxxxStatus;
reg = 4;
UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
- 0x06);
+ 0x00);
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
return 0;
}
+static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk)
+{
+ int result;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_setup_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ result = ftdi_elan_check_controller(ftdi, quirk);
+ UxxxStatus = ftdi_elan_close_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return result;
+}
+
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+{
+ u32 controlreg;
+ u8 sensebits;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(750);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(250);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(1000);
+ sensebits = (controlreg >> 16) & 0x000F;
+ if (0x0D == sensebits)
+ return 0;
+ else
+ return - ENXIO;
+}
+
static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi)
{
+ int UxxxStatus;
u32 pcidata;
- int U132Status;
- int reg;
- int reset_repeat = 0;
- do_reset:reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01);
- if (U132Status)
- return U132Status;
- reset_check:{
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (pcidata & 1) {
- msleep(500);
- if (reset_repeat++ > 100) {
- reset_repeat = 0;
- goto do_reset;
- } else
- goto reset_check;
+ int reg = 0;
+ u8 fn;
+ int activePCIfn = 0;
+ int max_devices = 0;
+ int controllers = 0;
+ int unrecognized = 0;
+ ftdi->function = 0;
+ for (fn = 0; (fn < 4); fn++) {
+ u32 pciVID = 0;
+ u32 pciPID = 0;
+ int devices = 0;
+ activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ pciVID = pcidata & 0xFFFF;
+ pciPID = (pcidata >> 16) & 0xFFFF;
+ if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_AMD756);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_ZFMICRO);
+ controllers += 1;
+ } else if (0 == pcidata) {
+ } else
+ unrecognized += 1;
+ if (devices > max_devices) {
+ max_devices = devices;
+ ftdi->function = fn + 1;
+ ftdi->platform_data.vendor = pciVID;
+ ftdi->platform_data.device = pciPID;
}
}
- goto dump_regs;
- msleep(500);
- reg = 0x28;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x40;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 4;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(250);
- reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x28;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 8;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x48;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(100);
- reg = 0x50;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (!(pcidata & 1)) {
- msleep(500);
- goto power_check;
- }
- msleep(3000);
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(750);
- reg = 0x54;
- if (0) {
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- }
- if (0) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- }
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- dump_regs:for (reg = 0; reg <= 0x54; reg += 4) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
+ if (ftdi->function > 0) {
+ UxxxStatus = ftdi_elan_setup_controller(ftdi,
+ ftdi->function - 1);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return 0;
+ } else if (controllers > 0) {
+ return -ENXIO;
+ } else if (unrecognized > 0) {
+ return -ENXIO;
+ } else {
+ ftdi->enumerated = 0;
+ return -ENXIO;
}
- return 0;
}
platform_device_unregister(&ftdi->platform_dev);
ftdi->synchronized = 0;
ftdi->enumerated = 0;
+ ftdi->initialized = 0;
ftdi->registered = 0;
}
flush_workqueue(status_queue);
dev->dev = NULL;
goto out;
}
+ dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
- (u32)SISUSB_HADDR(x, y), 2, &written);
+ (long)SISUSB_HADDR(x, y), 2, &written);
mutex_unlock(&sisusb->lock);
}
}
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
- (u32)SISUSB_HADDR(x, y), count * 2, &written);
+ (long)SISUSB_HADDR(x, y), count * 2, &written);
mutex_unlock(&sisusb->lock);
}
sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y),
- (u32)SISUSB_HADDR(x, y), length, &written);
+ (long)SISUSB_HADDR(x, y), length, &written);
mutex_unlock(&sisusb->lock);
}
sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy),
- (u32)SISUSB_HADDR(dx, dy), length, &written);
+ (long)SISUSB_HADDR(dx, dy), length, &written);
mutex_unlock(&sisusb->lock);
}
length);
sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin,
- (u32)SISUSB_HADDR(0, 0),
+ (long)SISUSB_HADDR(0, 0),
length, &written);
mutex_unlock(&sisusb->lock);
}
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t),
- (u32)SISUSB_HADDR(0, t), length, &written);
+ (long)SISUSB_HADDR(0, t), length, &written);
mutex_unlock(&sisusb->lock);
struct trancevibrator *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata(interface, NULL);
device_remove_file(&interface->dev, &dev_attr_speed);
+ usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
}
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ int ret, embd_phy;
void *buf;
u16 rx_ctl;
struct asix_data *data = (struct asix_data *)&dev->data;
AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
goto out2;
+ /* 0x10 is the phy id of the embedded 10/100 ethernet phy */
+ embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
- 0x0000, 0, 0, buf)) < 0) {
+ embd_phy, 0, 0, buf)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
goto out2;
}
- if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
goto out2;
msleep(150);
goto out2;
msleep(150);
- if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
- goto out2;
+ if (embd_phy) {
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
+ goto out2;
+ }
+ else {
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
+ goto out2;
+ }
msleep(150);
rx_ctl = asix_read_rx_ctl(dev);
struct gl_packet packets;
};
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly; it should use the generic
-// status IRQ code (which didn't exist back in 2001).
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg(dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- USB_CTRL_SET_TIMEOUT);
- return retval;
-}
-
-static void gl_interrupt_complete(struct urb *urb)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status)
- err("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0)
- dbg("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect(struct usbnet *dev)
-{
- int retval;
-
- dbg("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read(dev)) != 0) {
- dbg("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init(struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree(priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb(priv->irq_urb, dev->udev,
- usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb(priv->irq_urb);
-
- // free irq urb
- usb_free_urb(priv->irq_urb);
-
- // free the private data structure
- kfree(priv);
-
- return 0;
-}
-
-#endif
-
static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct gl_header *header;
{
int retval;
struct net_device *net = dev->net;
+ struct cdc_state *info = (void *) &dev->data;
union {
void *buf;
struct rndis_msg_hdr *header;
return -ENOMEM;
retval = usbnet_generic_cdc_bind(dev, intf);
if (retval < 0)
- goto done;
+ goto fail;
net->hard_header_len += sizeof (struct rndis_data_hdr);
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
-fail:
- usb_driver_release_interface(driver_of(intf),
- ((struct cdc_state *)&(dev->data))->data);
- goto done;
+ goto fail_and_release;
}
dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size);
/* REVISIT: peripheral "alignment" request is ignored ... */
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
- goto fail;
+ goto fail_and_release;
}
tmp = le32_to_cpu(u.get_c->offset);
if (unlikely((tmp + 8) > (1024 - ETH_ALEN)
dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
tmp, le32_to_cpu(u.get_c->len));
retval = -EDOM;
- goto fail;
+ goto fail_and_release;
}
memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
- goto fail;
+ goto fail_and_release;
}
retval = 0;
-done:
+
+ kfree(u.buf);
+ return retval;
+
+fail_and_release:
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+fail:
kfree(u.buf);
return retval;
}
#define RX_URB_FAIL 3
/* Define these values to match your device */
-#define VENDOR_ID_REALTEK 0x0bda
+#define VENDOR_ID_REALTEK 0x0bda
#define VENDOR_ID_MELCO 0x0411
-#define VENDOR_ID_MICRONET 0x3980
+#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_OQO 0x1557
#define VENDOR_ID_ZYXEL 0x0586
#define PRODUCT_ID_RTL8150 0x8150
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
{}
};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless S720 CDMA/EV-DO */
+ { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless U720 CDMA/EV-DO */
{ USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
{ USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
+ { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
cypress_set_termios(port, &priv->tmp_termios);
return (0);
break;
- /* these are called when setting baud rate from gpsd */
- case TCGETS:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
- return -EFAULT;
- }
- return (0);
- break;
- case TCSETS:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
- return -EFAULT;
- }
- /* here we need to call cypress_set_termios to invoke the new settings */
- cypress_set_termios(port, &priv->tmp_termios);
- return (0);
- break;
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
while (priv != NULL) {
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID 0xF9D0
-#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <asm/uaccess.h>
+
+static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1404, 0xcddc) },
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ktermios t;
+
+ dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
+
+ if (cmd == TCSETSF) {
+ if (user_termios_to_kernel_termios(&t, (struct termios __user *)arg))
+ return -EFAULT;
+
+ dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
+ t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
+
+ if (!(t.c_lflag & ICANON))
+ return -EINVAL;
+ }
+ return -ENOIOCTLCMD;
+}
+
static struct usb_driver funsoft_driver = {
.name = "funsoft",
.probe = usb_serial_probe,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
+ .ioctl = funsoft_ioctl,
};
static int __init funsoft_init(void)
module_init(funsoft_init);
module_exit(funsoft_exit);
MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
struct ktermios *old);
-static int klsi_105_ioctl (struct usb_serial_port *port,
- struct file * file,
- unsigned int cmd,
- unsigned long arg);
static void klsi_105_throttle (struct usb_serial_port *port);
static void klsi_105_unthrottle (struct usb_serial_port *port);
/*
.chars_in_buffer = klsi_105_chars_in_buffer,
.write_room = klsi_105_write_room,
.read_bulk_callback =klsi_105_read_bulk_callback,
- .ioctl = klsi_105_ioctl,
.set_termios = klsi_105_set_termios,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
*/
return retval;
}
-
-static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct klsi_105_private *priv = usb_get_serial_port_data(port);
- void __user *user_arg = (void __user *)arg;
-
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
-
- /* Based on code from acm.c and others */
- switch (cmd) {
- case TIOCMIWAIT:
- /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
- /* TODO */
- dbg("%s - TIOCMIWAIT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TIOCGICOUNT:
- /* return count of modemline transitions */
- /* TODO */
- dbg("%s - TIOCGICOUNT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TCGETS:
- /* return current info to caller */
- dbg("%s - TCGETS data faked/incomplete", __FUNCTION__);
-
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
- &priv->termios))
- return -EFAULT;
- return 0;
- case TCSETS:
- /* set port termios to the one given by the user */
- dbg("%s - TCSETS not handled", __FUNCTION__);
-
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (user_termios_to_kernel_termios(&priv->termios,
- (struct termios __user *)arg))
- return -EFAULT;
- klsi_105_set_termios(port, &priv->termios);
- return 0;
- case TCSETSW: {
- /* set port termios and try to wait for completion of last
- * write operation */
- /* We guess here. If there are not too many write urbs
- * outstanding, we lie. */
- /* what is the right way to wait here? schedule() ? */
- /*
- while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE)
- schedule();
- */
- return -ENOIOCTLCMD;
- }
- default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
- return(-ENOIOCTLCMD);
- break;
- }
- return 0;
-} /* klsi_105_ioctl */
static void klsi_105_throttle (struct usb_serial_port *port)
{
tty_ldisc_deref(ld);
return 0;
- case TCGETS:
- if (kernel_termios_to_user_termios
- ((struct termios __user *)argp, tty->termios))
- return -EFAULT;
- return 0;
-
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
return mos7840_get_lsr_info(mos7840_port, argp);
#define OPTION_PRODUCT_FUSION2 0x6300
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
+#define OPTION_PRODUCT_GTMAX36 0x6701
#define HUAWEI_PRODUCT_E600 0x1001
+#define HUAWEI_PRODUCT_E220 0x1003
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
dbg("%s", __FUNCTION__);
+ if (port->number != 0)
+ return 0;
+
portdata = usb_get_serial_port_data(port);
if (port->tty) {
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+/* Reported by <honkkis@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
+ "Nokia",
+ "E70",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Jon Hart <Jon.Hart@web.de> */
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
"Nokia",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+ "Nokia",
+ "Nokia 6233",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Alex Corcoles <alex@corcoles.net> */
UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
"Nokia",
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/*
+ * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
+ * Reported by Pete Zaitcev <zaitcev@redhat.com>
+ * This device chokes on both version of MODE SENSE which we have, so
+ * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
+ */
+UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
+ "AMI",
+ "Virtual Floppy",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
"Apple",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* This prevents the kernel from detecting the virtual cd-drive with the
+ * Windows drivers. <johann.wilhelm@student.tugraz.at>
+*/
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff,
+ "HUAWEI",
+ "E220 USB-UMTS Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Francesco Foresti <frafore@tiscali.it> */
+UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
+ "Super Top",
+ "IDE DEVICE",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device */
+UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
+ "Teac",
+ "HD-35PUK-B",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
snprintf(name, sizeof(name), "aty128bl%d", info->node);
- bd = backlight_device_register(name, par, &aty128_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &aty128_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "aty128: Backlight registration failed\n");
snprintf(name, sizeof(name), "atybl%d", info->node);
- bd = backlight_device_register(name, par, &aty_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &aty_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "aty: Backlight registration failed\n");
snprintf(name, sizeof(name), "radeonbl%d", rinfo->info->node);
- bd = backlight_device_register(name, pdata, &radeon_bl_data);
+ bd = backlight_device_register(name, rinfo->info->dev, pdata, &radeon_bl_data);
if (IS_ERR(bd)) {
rinfo->info->bl_dev = NULL;
printk("radeonfb: Backlight registration failed\n");
* Creates and registers new backlight class_device. Returns either an
* ERR_PTR() or a pointer to the newly allocated device.
*/
-struct backlight_device *backlight_device_register(const char *name, void *devdata,
- struct backlight_properties *bp)
+struct backlight_device *backlight_device_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct backlight_properties *bp)
{
int i, rc;
struct backlight_device *new_bd;
new_bd->props = bp;
memset(&new_bd->class_dev, 0, sizeof(new_bd->class_dev));
new_bd->class_dev.class = &backlight_class;
+ new_bd->class_dev.dev = dev;
strlcpy(new_bd->class_dev.class_id, name, KOBJ_NAME_LEN);
class_set_devdata(&new_bd->class_dev, devdata);
machinfo->limit_mask = -1;
corgi_backlight_device = backlight_device_register ("corgi-bl",
- NULL, &corgibl_data);
+ &pdev->dev, NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
static int __init hp680bl_probe(struct platform_device *dev)
{
hp680_backlight_device = backlight_device_register ("hp680-bl",
- NULL, &hp680bl_data);
+ &dev->dev, NULL, &hp680bl_data);
if (IS_ERR (hp680_backlight_device))
return PTR_ERR (hp680_backlight_device);
local_irq_restore(flags);
- locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data);
+ locomolcd_bl_device = backlight_device_register("locomo-bl", &ldev->dev, NULL, &locomobl_data);
if (IS_ERR (locomolcd_bl_device))
return PTR_ERR (locomolcd_bl_device);
all->info.fbops = &bw2_ops;
all->info.screen_base =
- sbus_ioremap(&op->resource[0], 0, all->par.fbsize, "bw2 ram");
+ of_ioremap(&op->resource[0], 0, all->par.fbsize, "bw2 ram");
all->info.par = &all->par;
bw2_blank(0, &all->info);
err= register_framebuffer(&all->info);
if (err < 0) {
- of_iounmap(all->par.regs, sizeof(struct bw2_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct bw2_regs));
+ of_iounmap(&op->resource[0],
+ all->info.screen_base, all->par.fbsize);
kfree(all);
return err;
}
return bw2_init_one(op);
}
-static int __devexit bw2_remove(struct of_device *dev)
+static int __devexit bw2_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
- of_iounmap(all->par.regs, sizeof(struct bw2_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0], all->par.regs, sizeof(struct bw2_regs));
+ of_iounmap(&op->resource[0], all->info.screen_base, all->par.fbsize);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
struct cg14_par par;
};
-static void cg14_unmap_regs(struct all_info *all)
+static void cg14_unmap_regs(struct of_device *op, struct all_info *all)
{
if (all->par.regs)
- of_iounmap(all->par.regs, sizeof(struct cg14_regs));
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct cg14_regs));
if (all->par.clut)
- of_iounmap(all->par.clut, sizeof(struct cg14_clut));
+ of_iounmap(&op->resource[0],
+ all->par.clut, sizeof(struct cg14_clut));
if (all->par.cursor)
- of_iounmap(all->par.cursor, sizeof(struct cg14_cursor));
+ of_iounmap(&op->resource[0],
+ all->par.cursor, sizeof(struct cg14_cursor));
if (all->info.screen_base)
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[1],
+ all->info.screen_base, all->par.fbsize);
}
static int __devinit cg14_init_one(struct of_device *op)
if (!all->par.regs || !all->par.clut || !all->par.cursor ||
!all->info.screen_base)
- cg14_unmap_regs(all);
+ cg14_unmap_regs(op, all);
is_8mb = (((op->resource[1].end - op->resource[1].start) + 1) ==
(8 * 1024 * 1024));
__cg14_reset(&all->par);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- cg14_unmap_regs(all);
+ cg14_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
err = register_framebuffer(&all->info);
if (err < 0) {
fb_dealloc_cmap(&all->info.cmap);
- cg14_unmap_regs(all);
+ cg14_unmap_regs(op, all);
kfree(all);
return err;
}
return cg14_init_one(op);
}
-static int __devexit cg14_remove(struct of_device *dev)
+static int __devexit cg14_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- cg14_unmap_regs(all);
+ cg14_unmap_regs(op, all);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
cg3_do_default_mode(&all->par);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- of_iounmap(all->par.regs, sizeof(struct cg3_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct cg3_regs));
+ of_iounmap(&op->resource[0],
+ all->info.screen_base, all->par.fbsize);
kfree(all);
return -ENOMEM;
}
err = register_framebuffer(&all->info);
if (err < 0) {
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.regs, sizeof(struct cg3_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct cg3_regs));
+ of_iounmap(&op->resource[0],
+ all->info.screen_base, all->par.fbsize);
kfree(all);
return err;
}
return cg3_init_one(op);
}
-static int __devexit cg3_remove(struct of_device *dev)
+static int __devexit cg3_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.regs, sizeof(struct cg3_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0], all->par.regs, sizeof(struct cg3_regs));
+ of_iounmap(&op->resource[0], all->info.screen_base, all->par.fbsize);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
struct cg6_par par;
};
-static void cg6_unmap_regs(struct all_info *all)
+static void cg6_unmap_regs(struct of_device *op, struct all_info *all)
{
if (all->par.fbc)
- of_iounmap(all->par.fbc, 4096);
+ of_iounmap(&op->resource[0], all->par.fbc, 4096);
if (all->par.tec)
- of_iounmap(all->par.tec, sizeof(struct cg6_tec));
+ of_iounmap(&op->resource[0],
+ all->par.tec, sizeof(struct cg6_tec));
if (all->par.thc)
- of_iounmap(all->par.thc, sizeof(struct cg6_thc));
+ of_iounmap(&op->resource[0],
+ all->par.thc, sizeof(struct cg6_thc));
if (all->par.bt)
- of_iounmap(all->par.bt, sizeof(struct bt_regs));
+ of_iounmap(&op->resource[0],
+ all->par.bt, sizeof(struct bt_regs));
if (all->par.fhc)
- of_iounmap(all->par.fhc, sizeof(u32));
+ of_iounmap(&op->resource[0],
+ all->par.fhc, sizeof(u32));
if (all->info.screen_base)
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->info.screen_base, all->par.fbsize);
}
static int __devinit cg6_init_one(struct of_device *op)
all->par.fbsize, "cgsix ram");
if (!all->par.fbc || !all->par.tec || !all->par.thc ||
!all->par.bt || !all->par.fhc || !all->info.screen_base) {
- cg6_unmap_regs(all);
+ cg6_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
cg6_blank(0, &all->info);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- cg6_unmap_regs(all);
+ cg6_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
err = register_framebuffer(&all->info);
if (err < 0) {
- cg6_unmap_regs(all);
+ cg6_unmap_regs(op, all);
fb_dealloc_cmap(&all->info.cmap);
kfree(all);
return err;
return cg6_init_one(op);
}
-static int __devexit cg6_remove(struct of_device *dev)
+static int __devexit cg6_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- cg6_unmap_regs(all);
+ cg6_unmap_regs(op, all);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
all->par.dac = of_ioremap(&op->resource[1], 0,
sizeof(struct ffb_dac), "ffb dac");
if (!all->par.dac) {
- of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(&op->resource[2],
+ all->par.fbc, sizeof(struct ffb_fbc));
kfree(all);
return -ENOMEM;
}
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
printk(KERN_ERR "ffb: Could not allocate color map.\n");
- of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
- of_iounmap(all->par.dac, sizeof(struct ffb_dac));
+ of_iounmap(&op->resource[2],
+ all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(&op->resource[1],
+ all->par.dac, sizeof(struct ffb_dac));
kfree(all);
return -ENOMEM;
}
if (err < 0) {
printk(KERN_ERR "ffb: Could not register framebuffer.\n");
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
- of_iounmap(all->par.dac, sizeof(struct ffb_dac));
+ of_iounmap(&op->resource[2],
+ all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(&op->resource[1],
+ all->par.dac, sizeof(struct ffb_dac));
kfree(all);
return err;
}
return ffb_init_one(op);
}
-static int __devexit ffb_remove(struct of_device *dev)
+static int __devexit ffb_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
- of_iounmap(all->par.dac, sizeof(struct ffb_dac));
+ of_iounmap(&op->resource[2], all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(&op->resource[1], all->par.dac, sizeof(struct ffb_dac));
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
/*
- * Frame buffer device for IBM GXT4500P display adaptor
+ * Frame buffer device for IBM GXT4500P and GXT6000P display adaptors
*
* Copyright (C) 2006 Paul Mackerras, IBM Corp. <paulus@samba.org>
*/
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/delay.h>
+#include <linux/string.h>
#define PCI_DEVICE_ID_IBM_GXT4500P 0x21c
+#define PCI_DEVICE_ID_IBM_GXT6000P 0x170
/* GXT4500P registers */
#define PLL_M 0x4040
#define PLL_N 0x4044
#define PLL_POSTDIV 0x4048
+#define PLL_C 0x404c
/* Hardware cursor */
#define CURSOR_X 0x4078
int pixfmt; /* pixel format, see DFA_PIX_* values */
/* PLL parameters */
+ int refclk_ps; /* ref clock period in picoseconds */
int pll_m; /* ref clock divisor */
int pll_n; /* VCO divisor */
int pll_pd1; /* first post-divisor */
.vmode = FB_VMODE_NONINTERLACED
};
+/* List of supported cards */
+enum gxt_cards {
+ GXT4500P,
+ GXT6000P
+};
+
+/* Card-specific information */
+static const struct cardinfo {
+ int refclk_ps; /* period of PLL reference clock in ps */
+ const char *cardname;
+} cardinfo[] = {
+ [GXT4500P] = { .refclk_ps = 9259, .cardname = "IBM GXT4500P" },
+ [GXT6000P] = { .refclk_ps = 40000, .cardname = "IBM GXT6000P" },
+};
+
/*
* The refclk and VCO dividers appear to use a linear feedback shift
* register, which gets reloaded when it reaches a terminal value, at
/* 130 */ 0x9e, 0x4f, 0x27, 0x93, 0xc9, 0xe4, 0x72, 0x39, 0x1c, 0x0e,
/* 140 */ 0x87, 0xc3, 0x61, 0x30, 0x18, 0x8c, 0xc6, 0x63, 0x31, 0x98,
/* 150 */ 0xcc, 0xe6, 0x73, 0xb9, 0x5c, 0x2e, 0x97, 0x4b, 0xa5, 0xd2,
-/* 160 */ 0x69, 0xb4, 0xda, 0xed, 0x76, 0xbb, 0x5d, 0xae, 0xd7, 0x6b,
-/* 170 */ 0xb5, 0x5a, 0xad, 0x56, 0xab, 0xd5, 0x6a, 0x35, 0x1a, 0x8d,
-/* 180 */ 0x46, 0x23, 0x11, 0x88, 0x44, 0x22, 0x91, 0xc8, 0x64, 0x32,
-/* 190 */ 0x19, 0x0c, 0x86, 0x43, 0x21, 0x10, 0x08, 0x04, 0x02, 0x81,
-/* 200 */ 0x40, 0xa0, 0xd0, 0x68, 0x34, 0x9a, 0xcd, 0x66, 0x33, 0x99,
-/* 210 */ 0x4c, 0xa6, 0x53, 0xa9, 0xd4, 0xea, 0x75, 0x3a, 0x9d, 0xce,
-/* 220 */ 0xe7, 0xf3, 0xf9, 0x7c, 0x3e, 0x1f, 0x8f, 0x47, 0xa3, 0x51,
-/* 230 */ 0xa8, 0x54, 0xaa, 0x55, 0x2a, 0x15, 0x0a, 0x05, 0x82, 0xc1,
-/* 240 */ 0x60, 0xb0, 0x58, 0xac, 0xd6, 0xeb, 0xf5, 0x7a, 0xbd, 0xde,
-/* 250 */ 0x6f, 0x37, 0x1b, 0x0d, 0x06, 0x03, 0x01,
+/* 160 */ 0x69,
};
-#define REF_PERIOD_PS 9259 /* period of reference clock in ps */
-
static int calc_pll(int period_ps, struct gxt4500_par *par)
{
int m, n, pdiv1, pdiv2, postdiv;
- int pll_period, best_error, t;
+ int pll_period, best_error, t, intf;
- /* only deal with range 1MHz - 400MHz */
- if (period_ps < 2500 || period_ps > 1000000)
+ /* only deal with range 5MHz - 300MHz */
+ if (period_ps < 3333 || period_ps > 200000)
return -1;
best_error = 1000000;
for (pdiv2 = 1; pdiv2 <= pdiv1; ++pdiv2) {
postdiv = pdiv1 * pdiv2;
pll_period = (period_ps + postdiv - 1) / postdiv;
- /* keep pll in range 500..1250 MHz */
- if (pll_period < 800 || pll_period > 2000)
+ /* keep pll in range 350..600 MHz */
+ if (pll_period < 1666 || pll_period > 2857)
continue;
- for (m = 3; m <= 40; ++m) {
- n = REF_PERIOD_PS * m * postdiv / period_ps;
- if (n < 5 || n > 256)
+ for (m = 1; m <= 64; ++m) {
+ intf = m * par->refclk_ps;
+ if (intf > 500000)
+ break;
+ n = intf * postdiv / period_ps;
+ if (n < 3 || n > 160)
continue;
- t = REF_PERIOD_PS * m * postdiv / n;
+ t = par->refclk_ps * m * postdiv / n;
t -= period_ps;
if (t >= 0 && t < best_error) {
par->pll_m = m;
static int calc_pixclock(struct gxt4500_par *par)
{
- return REF_PERIOD_PS * par->pll_m * par->pll_pd1 * par->pll_pd2
+ return par->refclk_ps * par->pll_m * par->pll_pd1 * par->pll_pd2
/ par->pll_n;
}
struct gxt4500_par *par = info->par;
struct fb_var_screeninfo *var = &info->var;
int err;
- u32 ctrlreg;
+ u32 ctrlreg, tmp;
unsigned int dfa_ctl, pixfmt, stride;
unsigned int wid_tiles, i;
unsigned int prefetch_pix, htot;
writereg(par, DTG_CONTROL, ctrlreg);
/* set PLL registers */
+ tmp = readreg(par, PLL_C) & ~0x7f;
+ if (par->pll_n < 38)
+ tmp |= 0x29;
+ if (par->pll_n < 69)
+ tmp |= 0x35;
+ else if (par->pll_n < 100)
+ tmp |= 0x76;
+ else
+ tmp |= 0x7e;
+ writereg(par, PLL_C, tmp);
writereg(par, PLL_M, mdivtab[par->pll_m - 1]);
writereg(par, PLL_N, ndivtab[par->pll_n - 2]);
- writereg(par, PLL_POSTDIV,
- ((8 - par->pll_pd1) << 3) | (8 - par->pll_pd2));
+ tmp = ((8 - par->pll_pd2) << 3) | (8 - par->pll_pd1);
+ if (par->pll_pd1 == 8 || par->pll_pd2 == 8) {
+ /* work around erratum */
+ writereg(par, PLL_POSTDIV, tmp | 0x9);
+ udelay(1);
+ }
+ writereg(par, PLL_POSTDIV, tmp);
msleep(20);
/* turn off hardware cursor */
if (reg > 1023)
return 1;
- cmap_entry = ((transp & 0xff00) << 16) | ((blue & 0xff00) << 8) |
- (green & 0xff00) | (red >> 8);
+ cmap_entry = ((transp & 0xff00) << 16) | ((red & 0xff00) << 8) |
+ (green & 0xff00) | (blue >> 8);
writereg(par, CMAP + reg * 4, cmap_entry);
if (reg < 16 && par->pixfmt != DFA_PIX_8BIT) {
struct gxt4500_par *par;
struct fb_info *info;
struct fb_var_screeninfo var;
+ enum gxt_cards cardtype;
err = pci_enable_device(pdev);
if (err) {
goto err_free_fb;
}
par = info->par;
+ cardtype = ent->driver_data;
+ par->refclk_ps = cardinfo[cardtype].refclk_ps;
info->fix = gxt4500_fix;
+ strlcpy(info->fix.id, cardinfo[cardtype].cardname,
+ sizeof(info->fix.id));
info->pseudo_palette = par->pseudo_palette;
info->fix.mmio_start = reg_phys;
/* supported chipsets */
static const struct pci_device_id gxt4500_pci_tbl[] = {
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4500P,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4500P),
+ .driver_data = GXT4500P },
+ { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT6000P),
+ .driver_data = GXT6000P },
{ 0 }
};
module_exit(gxt4500_exit);
MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
-MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P");
+MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P/6000P");
MODULE_LICENSE("GPL");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\"");
struct leo_par par;
};
-static void leo_unmap_regs(struct all_info *all)
+static void leo_unmap_regs(struct of_device *op, struct all_info *all)
{
if (all->par.lc_ss0_usr)
- of_iounmap(all->par.lc_ss0_usr, 0x1000);
+ of_iounmap(&op->resource[0], all->par.lc_ss0_usr, 0x1000);
if (all->par.ld_ss0)
- of_iounmap(all->par.ld_ss0, 0x1000);
+ of_iounmap(&op->resource[0], all->par.ld_ss0, 0x1000);
if (all->par.ld_ss1)
- of_iounmap(all->par.ld_ss1, 0x1000);
+ of_iounmap(&op->resource[0], all->par.ld_ss1, 0x1000);
if (all->par.lx_krn)
- of_iounmap(all->par.lx_krn, 0x1000);
+ of_iounmap(&op->resource[0], all->par.lx_krn, 0x1000);
if (all->par.cursor)
- of_iounmap(all->par.cursor, sizeof(struct leo_cursor));
+ of_iounmap(&op->resource[0],
+ all->par.cursor, sizeof(struct leo_cursor));
if (all->info.screen_base)
- of_iounmap(all->info.screen_base, 0x800000);
+ of_iounmap(&op->resource[0], all->info.screen_base, 0x800000);
}
static int __devinit leo_init_one(struct of_device *op)
!all->par.lx_krn ||
!all->par.cursor ||
!all->info.screen_base) {
- leo_unmap_regs(all);
+ leo_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
leo_blank(0, &all->info);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- leo_unmap_regs(all);
+ leo_unmap_regs(op, all);
kfree(all);
return -ENOMEM;;
}
err = register_framebuffer(&all->info);
if (err < 0) {
fb_dealloc_cmap(&all->info.cmap);
- leo_unmap_regs(all);
+ leo_unmap_regs(op, all);
kfree(all);
return err;
}
return leo_init_one(op);
}
-static int __devexit leo_remove(struct of_device *dev)
+static int __devexit leo_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- leo_unmap_regs(all);
+ leo_unmap_regs(op, all);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
snprintf(name, sizeof(name), "nvidiabl%d", info->node);
- bd = backlight_device_register(name, par, &nvidia_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &nvidia_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "nvidia: Backlight registration failed\n");
all->info.screen_base = of_ioremap(&op->resource[2], 0,
all->par.fbsize, "p9100 ram");
if (!all->info.screen_base) {
- of_iounmap(all->par.regs, sizeof(struct p9100_regs));
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct p9100_regs));
kfree(all);
return -ENOMEM;
}
p9100_blank(0, &all->info);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- of_iounmap(all->par.regs, sizeof(struct p9100_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct p9100_regs));
+ of_iounmap(&op->resource[2],
+ all->info.screen_base, all->par.fbsize);
kfree(all);
return -ENOMEM;
}
err = register_framebuffer(&all->info);
if (err < 0) {
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.regs, sizeof(struct p9100_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->par.regs, sizeof(struct p9100_regs));
+ of_iounmap(&op->resource[2],
+ all->info.screen_base, all->par.fbsize);
kfree(all);
return err;
}
return p9100_init_one(op);
}
-static int __devexit p9100_remove(struct of_device *dev)
+static int __devexit p9100_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- of_iounmap(all->par.regs, sizeof(struct p9100_regs));
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0], all->par.regs, sizeof(struct p9100_regs));
+ of_iounmap(&op->resource[2], all->info.screen_base, all->par.fbsize);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
done:
if (res_specified) {
dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
- inf->xres = xres; inf->yres = yres;
+ inf->modes[0].xres = xres; inf->modes[0].yres = yres;
}
if (bpp_specified)
switch (bpp) {
case 4:
case 8:
case 16:
- inf->bpp = bpp;
+ inf->modes[0].bpp = bpp;
dev_info(dev, "overriding bit depth: %d\n", bpp);
break;
default:
dev_err(dev, "Depth %d is not valid\n", bpp);
}
} else if (!strncmp(this_opt, "pixclock:", 9)) {
- inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
+ inf->modes[0].pixclock = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override pixclock: %ld\n", inf->modes[0].pixclock);
} else if (!strncmp(this_opt, "left:", 5)) {
- inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
- dev_info(dev, "override left: %u\n", inf->left_margin);
+ inf->modes[0].left_margin = simple_strtoul(this_opt+5, NULL, 0);
+ dev_info(dev, "override left: %u\n", inf->modes[0].left_margin);
} else if (!strncmp(this_opt, "right:", 6)) {
- inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override right: %u\n", inf->right_margin);
+ inf->modes[0].right_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override right: %u\n", inf->modes[0].right_margin);
} else if (!strncmp(this_opt, "upper:", 6)) {
- inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override upper: %u\n", inf->upper_margin);
+ inf->modes[0].upper_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override upper: %u\n", inf->modes[0].upper_margin);
} else if (!strncmp(this_opt, "lower:", 6)) {
- inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override lower: %u\n", inf->lower_margin);
+ inf->modes[0].lower_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override lower: %u\n", inf->modes[0].lower_margin);
} else if (!strncmp(this_opt, "hsynclen:", 9)) {
- inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
+ inf->modes[0].hsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override hsynclen: %u\n", inf->modes[0].hsync_len);
} else if (!strncmp(this_opt, "vsynclen:", 9)) {
- inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
+ inf->modes[0].vsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override vsynclen: %u\n", inf->modes[0].vsync_len);
} else if (!strncmp(this_opt, "hsync:", 6)) {
if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
dev_info(dev, "override hsync: Active Low\n");
- inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
+ inf->modes[0].sync &= ~FB_SYNC_HOR_HIGH_ACT;
} else {
dev_info(dev, "override hsync: Active High\n");
- inf->sync |= FB_SYNC_HOR_HIGH_ACT;
+ inf->modes[0].sync |= FB_SYNC_HOR_HIGH_ACT;
}
} else if (!strncmp(this_opt, "vsync:", 6)) {
if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
dev_info(dev, "override vsync: Active Low\n");
- inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
+ inf->modes[0].sync &= ~FB_SYNC_VERT_HIGH_ACT;
} else {
dev_info(dev, "override vsync: Active High\n");
- inf->sync |= FB_SYNC_VERT_HIGH_ACT;
+ inf->modes[0].sync |= FB_SYNC_VERT_HIGH_ACT;
}
} else if (!strncmp(this_opt, "dpc:", 4)) {
if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
snprintf(name, sizeof(name), "rivabl%d", info->node);
- bd = backlight_device_register(name, par, &riva_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &riva_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "riva: Backlight registration failed\n");
* Our LCD controller task (which is called when we blank or unblank)
* via keventd.
*/
-static void sa1100fb_task(void *dummy)
+static void sa1100fb_task(struct work_struct *w)
{
- struct sa1100fb_info *fbi = dummy;
+ struct sa1100fb_info *fbi = container_of(w, struct sa1100fb_info, task);
u_int state = xchg(&fbi->task_state, -1);
set_ctrlr_state(fbi, state);
fbi->max_bpp / 8;
init_waitqueue_head(&fbi->ctrlr_wait);
- INIT_WORK(&fbi->task, sa1100fb_task, fbi);
+ INIT_WORK(&fbi->task, sa1100fb_task);
init_MUTEX(&fbi->ctrlr_sem);
return fbi;
struct tcx_par par;
};
-static void tcx_unmap_regs(struct all_info *all)
+static void tcx_unmap_regs(struct of_device *op, struct all_info *all)
{
if (all->par.tec)
- of_iounmap(all->par.tec, sizeof(struct tcx_tec));
+ of_iounmap(&op->resource[7],
+ all->par.tec, sizeof(struct tcx_tec));
if (all->par.thc)
- of_iounmap(all->par.thc, sizeof(struct tcx_thc));
+ of_iounmap(&op->resource[9],
+ all->par.thc, sizeof(struct tcx_thc));
if (all->par.bt)
- of_iounmap(all->par.bt, sizeof(struct bt_regs));
+ of_iounmap(&op->resource[8],
+ all->par.bt, sizeof(struct bt_regs));
if (all->par.cplane)
- of_iounmap(all->par.cplane, all->par.fbsize * sizeof(u32));
+ of_iounmap(&op->resource[4],
+ all->par.cplane, all->par.fbsize * sizeof(u32));
if (all->info.screen_base)
- of_iounmap(all->info.screen_base, all->par.fbsize);
+ of_iounmap(&op->resource[0],
+ all->info.screen_base, all->par.fbsize);
}
static int __devinit tcx_init_one(struct of_device *op)
all->par.fbsize, "tcx ram");
if (!all->par.tec || !all->par.thc ||
!all->par.bt || !all->info.screen_base) {
- tcx_unmap_regs(all);
+ tcx_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
all->par.fbsize * sizeof(u32),
"tcx cplane");
if (!all->par.cplane) {
- tcx_unmap_regs(all);
+ tcx_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
tcx_blank(FB_BLANK_UNBLANK, &all->info);
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
- tcx_unmap_regs(all);
+ tcx_unmap_regs(op, all);
kfree(all);
return -ENOMEM;
}
err = register_framebuffer(&all->info);
if (err < 0) {
fb_dealloc_cmap(&all->info.cmap);
- tcx_unmap_regs(all);
+ tcx_unmap_regs(op, all);
kfree(all);
return err;
}
return tcx_init_one(op);
}
-static int __devexit tcx_remove(struct of_device *dev)
+static int __devexit tcx_remove(struct of_device *op)
{
- struct all_info *all = dev_get_drvdata(&dev->dev);
+ struct all_info *all = dev_get_drvdata(&op->dev);
unregister_framebuffer(&all->info);
fb_dealloc_cmap(&all->info.cmap);
- tcx_unmap_regs(all);
+ tcx_unmap_regs(op, all);
kfree(all);
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
if (errno == 0) {
/* TODO: if error isn't found, add it dynamically */
+ errstr[len] = 0;
printk(KERN_ERR "%s: errstr :%s: not found\n", __FUNCTION__,
errstr);
errno = 1;
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/idr.h>
+#include <asm/semaphore.h>
#include "debug.h"
#include "v9fs.h"
new->iounit = 0;
new->rdir_pos = 0;
new->rdir_fcall = NULL;
+ init_MUTEX(&new->lock);
INIT_LIST_HEAD(&new->list);
return new;
}
/**
- * v9fs_fid_lookup - retrieve the right fid from a particular dentry
+ * v9fs_fid_lookup - return a locked fid from a dentry
* @dentry: dentry to look for fid in
- * @type: intent of lookup (operation or traversal)
*
- * find a fid in the dentry
+ * find a fid in the dentry, obtain its semaphore and return a reference to it.
+ * code calling lookup is responsible for releasing lock
*
* TODO: only match fids that have the same uid as current user
*
if (!return_fid) {
dprintk(DEBUG_ERROR, "Couldn't find a fid in dentry\n");
+ return_fid = ERR_PTR(-EBADF);
}
+ if(down_interruptible(&return_fid->lock))
+ return ERR_PTR(-EINTR);
+
return return_fid;
}
+
+/**
+ * v9fs_fid_clone - lookup the fid for a dentry, clone a private copy and release it
+ * @dentry: dentry to look for fid in
+ *
+ * find a fid in the dentry and then clone to a new private fid
+ *
+ * TODO: only match fids that have the same uid as current user
+ *
+ */
+
+struct v9fs_fid *v9fs_fid_clone(struct dentry *dentry)
+{
+ struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dentry->d_inode);
+ struct v9fs_fid *base_fid, *new_fid = ERR_PTR(-EBADF);
+ struct v9fs_fcall *fcall = NULL;
+ int fid, err;
+
+ base_fid = v9fs_fid_lookup(dentry);
+
+ if(IS_ERR(base_fid))
+ return base_fid;
+
+ if(base_fid) { /* clone fid */
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
+ eprintk(KERN_WARNING, "newfid fails!\n");
+ new_fid = ERR_PTR(-ENOSPC);
+ goto Release_Fid;
+ }
+
+ err = v9fs_t_walk(v9ses, base_fid->fid, fid, NULL, &fcall);
+ if (err < 0) {
+ dprintk(DEBUG_ERROR, "clone walk didn't work\n");
+ v9fs_put_idpool(fid, &v9ses->fidpool);
+ new_fid = ERR_PTR(err);
+ goto Free_Fcall;
+ }
+ new_fid = v9fs_fid_create(v9ses, fid);
+ if (new_fid == NULL) {
+ dprintk(DEBUG_ERROR, "out of memory\n");
+ new_fid = ERR_PTR(-ENOMEM);
+ }
+Free_Fcall:
+ kfree(fcall);
+ }
+
+Release_Fid:
+ up(&base_fid->lock);
+ return new_fid;
+}
+
+void v9fs_fid_clunk(struct v9fs_session_info *v9ses, struct v9fs_fid *fid)
+{
+ v9fs_t_clunk(v9ses, fid->fid);
+ v9fs_fid_destroy(fid);
+}
struct list_head list; /* list of fids associated with a dentry */
struct list_head active; /* XXX - debug */
+ struct semaphore lock;
+
u32 fid;
unsigned char fidopen; /* set when fid is opened */
unsigned char fidclunked; /* set when fid has already been clunked */
void v9fs_fid_destroy(struct v9fs_fid *fid);
struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *, int fid);
int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry);
+struct v9fs_fid *v9fs_fid_clone(struct dentry *dentry);
+void v9fs_fid_clunk(struct v9fs_session_info *v9ses, struct v9fs_fid *fid);
+
v9fs_mux_poll_tasks[i].task = NULL;
v9fs_mux_wq = create_workqueue("v9fs");
- if (!v9fs_mux_wq)
+ if (!v9fs_mux_wq) {
+ printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
return -ENOMEM;
+ }
return 0;
}
v9fs_error_init();
- printk(KERN_INFO "Installing v9fs 9P2000 file system support\n");
+ printk(KERN_INFO "Installing v9fs 9p2000 file system support\n");
ret = v9fs_mux_global_init();
- if (!ret)
+ if (ret) {
+ printk(KERN_WARNING "v9fs: starting mux failed\n");
return ret;
+ }
ret = register_filesystem(&v9fs_fs_type);
- if (!ret)
+ if (ret) {
+ printk(KERN_WARNING "v9fs: registering file system failed\n");
v9fs_mux_global_exit();
+ }
+
return ret;
}
struct v9fs_fid *vfid;
struct v9fs_fcall *fcall = NULL;
int omode;
- int fid = V9FS_NOFID;
int err;
dprintk(DEBUG_VFS, "inode: %p file: %p \n", inode, file);
- vfid = v9fs_fid_lookup(file->f_path.dentry);
- if (!vfid) {
- dprintk(DEBUG_ERROR, "Couldn't resolve fid from dentry\n");
- return -EBADF;
- }
-
- fid = v9fs_get_idpool(&v9ses->fidpool);
- if (fid < 0) {
- eprintk(KERN_WARNING, "newfid fails!\n");
- return -ENOSPC;
- }
+ vfid = v9fs_fid_clone(file->f_path.dentry);
+ if (IS_ERR(vfid))
+ return PTR_ERR(vfid);
- err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, &fcall);
- if (err < 0) {
- dprintk(DEBUG_ERROR, "rewalk didn't work\n");
- if (fcall && fcall->id == RWALK)
- goto clunk_fid;
- else {
- v9fs_put_idpool(fid, &v9ses->fidpool);
- goto free_fcall;
- }
- }
- kfree(fcall);
-
- /* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
- /* translate open mode appropriately */
omode = v9fs_uflags2omode(file->f_flags);
- err = v9fs_t_open(v9ses, fid, omode, &fcall);
+ err = v9fs_t_open(v9ses, vfid->fid, omode, &fcall);
if (err < 0) {
PRINT_FCALL_ERROR("open failed", fcall);
- goto clunk_fid;
- }
-
- vfid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
- if (vfid == NULL) {
- dprintk(DEBUG_ERROR, "out of memory\n");
- err = -ENOMEM;
- goto clunk_fid;
+ goto Clunk_Fid;
}
file->private_data = vfid;
- vfid->fid = fid;
vfid->fidopen = 1;
vfid->fidclunked = 0;
vfid->iounit = fcall->params.ropen.iounit;
return 0;
-clunk_fid:
- v9fs_t_clunk(v9ses, fid);
-
-free_fcall:
+Clunk_Fid:
+ v9fs_fid_clunk(v9ses, vfid);
kfree(fcall);
return err;
sb = file_inode->i_sb;
v9ses = v9fs_inode2v9ses(file_inode);
v9fid = v9fs_fid_lookup(file);
-
- if (!v9fid) {
- dprintk(DEBUG_ERROR,
- "no v9fs_fid\n");
- return -EBADF;
- }
+ if(IS_ERR(v9fid))
+ return PTR_ERR(v9fid);
fid = v9fid->fid;
if (fid < 0) {
result = v9fs_t_remove(v9ses, fid, &fcall);
if (result < 0) {
PRINT_FCALL_ERROR("remove fails", fcall);
+ goto Error;
}
v9fs_put_idpool(fid, &v9ses->fidpool);
v9fs_fid_destroy(v9fid);
+Error:
kfree(fcall);
return result;
}
inode = NULL;
vfid = NULL;
v9ses = v9fs_inode2v9ses(dir);
- dfid = v9fs_fid_lookup(dentry->d_parent);
- perm = unixmode2p9mode(v9ses, mode);
+ dfid = v9fs_fid_clone(dentry->d_parent);
+ if(IS_ERR(dfid)) {
+ err = PTR_ERR(dfid);
+ goto error;
+ }
+ perm = unixmode2p9mode(v9ses, mode);
if (nd && nd->flags & LOOKUP_OPEN)
flags = nd->intent.open.flags - 1;
else
perm, v9fs_uflags2omode(flags), NULL, &fid, &qid, &iounit);
if (err)
- goto error;
+ goto clunk_dfid;
vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ v9fs_fid_clunk(v9ses, dfid);
if (IS_ERR(vfid)) {
err = PTR_ERR(vfid);
vfid = NULL;
return 0;
+clunk_dfid:
+ v9fs_fid_clunk(v9ses, dfid);
+
error:
if (vfid)
v9fs_fid_destroy(vfid);
inode = NULL;
vfid = NULL;
v9ses = v9fs_inode2v9ses(dir);
- dfid = v9fs_fid_lookup(dentry->d_parent);
+ dfid = v9fs_fid_clone(dentry->d_parent);
+ if(IS_ERR(dfid)) {
+ err = PTR_ERR(dfid);
+ goto error;
+ }
+
perm = unixmode2p9mode(v9ses, mode | S_IFDIR);
err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
if (err) {
dprintk(DEBUG_ERROR, "create error %d\n", err);
- goto error;
- }
-
- err = v9fs_t_clunk(v9ses, fid);
- if (err) {
- dprintk(DEBUG_ERROR, "clunk error %d\n", err);
- goto error;
+ goto clean_up_dfid;
}
vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
if (IS_ERR(vfid)) {
err = PTR_ERR(vfid);
vfid = NULL;
- goto error;
+ goto clean_up_dfid;
}
+ v9fs_fid_clunk(v9ses, dfid);
inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
inode = NULL;
- goto error;
+ goto clean_up_fids;
}
dentry->d_op = &v9fs_dentry_operations;
d_instantiate(dentry, inode);
return 0;
-error:
+clean_up_fids:
if (vfid)
v9fs_fid_destroy(vfid);
+clean_up_dfid:
+ v9fs_fid_clunk(v9ses, dfid);
+
+error:
return err;
}
dentry->d_op = &v9fs_dentry_operations;
dirfid = v9fs_fid_lookup(dentry->d_parent);
- if (!dirfid) {
- dprintk(DEBUG_ERROR, "no dirfid\n");
- return ERR_PTR(-EINVAL);
- }
+ if(IS_ERR(dirfid))
+ return ERR_PTR(PTR_ERR(dirfid));
dirfidnum = dirfid->fid;
- if (dirfidnum < 0) {
- dprintk(DEBUG_ERROR, "no dirfid for inode %p, #%lu\n",
- dir, dir->i_ino);
- return ERR_PTR(-EBADF);
- }
-
newfid = v9fs_get_idpool(&v9ses->fidpool);
if (newfid < 0) {
eprintk(KERN_WARNING, "newfid fails!\n");
- return ERR_PTR(-ENOSPC);
+ result = -ENOSPC;
+ goto Release_Dirfid;
}
result = v9fs_t_walk(v9ses, dirfidnum, newfid,
(char *)dentry->d_name.name, &fcall);
+ up(&dirfid->lock);
+
if (result < 0) {
if (fcall && fcall->id == RWALK)
v9fs_t_clunk(v9ses, newfid);
return NULL;
- FreeFcall:
+Release_Dirfid:
+ up(&dirfid->lock);
+
+FreeFcall:
kfree(fcall);
+
return ERR_PTR(result);
}
struct inode *old_inode = old_dentry->d_inode;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(old_inode);
struct v9fs_fid *oldfid = v9fs_fid_lookup(old_dentry);
- struct v9fs_fid *olddirfid =
- v9fs_fid_lookup(old_dentry->d_parent);
- struct v9fs_fid *newdirfid =
- v9fs_fid_lookup(new_dentry->d_parent);
+ struct v9fs_fid *olddirfid;
+ struct v9fs_fid *newdirfid;
struct v9fs_wstat wstat;
struct v9fs_fcall *fcall = NULL;
int fid = -1;
dprintk(DEBUG_VFS, "\n");
- if ((!oldfid) || (!olddirfid) || (!newdirfid)) {
- dprintk(DEBUG_ERROR, "problem with arguments\n");
- return -EBADF;
+ if(IS_ERR(oldfid))
+ return PTR_ERR(oldfid);
+
+ olddirfid = v9fs_fid_clone(old_dentry->d_parent);
+ if(IS_ERR(olddirfid)) {
+ retval = PTR_ERR(olddirfid);
+ goto Release_lock;
+ }
+
+ newdirfid = v9fs_fid_clone(new_dentry->d_parent);
+ if(IS_ERR(newdirfid)) {
+ retval = PTR_ERR(newdirfid);
+ goto Clunk_olddir;
}
/* 9P can only handle file rename in the same directory */
if (memcmp(&olddirfid->qid, &newdirfid->qid, sizeof(newdirfid->qid))) {
dprintk(DEBUG_ERROR, "old dir and new dir are different\n");
- retval = -EPERM;
- goto FreeFcallnBail;
+ retval = -EXDEV;
+ goto Clunk_newdir;
}
fid = oldfid->fid;
dprintk(DEBUG_ERROR, "no fid for old file #%lu\n",
old_inode->i_ino);
retval = -EBADF;
- goto FreeFcallnBail;
+ goto Clunk_newdir;
}
v9fs_blank_wstat(&wstat);
retval = v9fs_t_wstat(v9ses, fid, &wstat, &fcall);
- FreeFcallnBail:
if (retval < 0)
PRINT_FCALL_ERROR("wstat error", fcall);
kfree(fcall);
+
+Clunk_newdir:
+ v9fs_fid_clunk(v9ses, newdirfid);
+
+Clunk_olddir:
+ v9fs_fid_clunk(v9ses, olddirfid);
+
+Release_lock:
+ up(&oldfid->lock);
+
return retval;
}
{
struct v9fs_fcall *fcall = NULL;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dentry->d_inode);
- struct v9fs_fid *fid = v9fs_fid_lookup(dentry);
+ struct v9fs_fid *fid = v9fs_fid_clone(dentry);
int err = -EPERM;
dprintk(DEBUG_VFS, "dentry: %p\n", dentry);
- if (!fid) {
- dprintk(DEBUG_ERROR,
- "couldn't find fid associated with dentry\n");
- return -EBADF;
- }
+ if(IS_ERR(fid))
+ return PTR_ERR(fid);
err = v9fs_t_stat(v9ses, fid->fid, &fcall);
}
kfree(fcall);
+ v9fs_fid_clunk(v9ses, fid);
return err;
}
static int v9fs_vfs_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dentry->d_inode);
- struct v9fs_fid *fid = v9fs_fid_lookup(dentry);
+ struct v9fs_fid *fid = v9fs_fid_clone(dentry);
struct v9fs_fcall *fcall = NULL;
struct v9fs_wstat wstat;
int res = -EPERM;
dprintk(DEBUG_VFS, "\n");
-
- if (!fid) {
- dprintk(DEBUG_ERROR,
- "Couldn't find fid associated with dentry\n");
- return -EBADF;
- }
+ if(IS_ERR(fid))
+ return PTR_ERR(fid);
v9fs_blank_wstat(&wstat);
if (iattr->ia_valid & ATTR_MODE)
if (res >= 0)
res = inode_setattr(dentry->d_inode, iattr);
+ v9fs_fid_clunk(v9ses, fid);
return res;
}
struct v9fs_fcall *fcall = NULL;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dentry->d_inode);
- struct v9fs_fid *fid = v9fs_fid_lookup(dentry);
+ struct v9fs_fid *fid = v9fs_fid_clone(dentry);
- if (!fid) {
- dprintk(DEBUG_ERROR, "could not resolve fid from dentry\n");
- retval = -EBADF;
- goto FreeFcall;
- }
+ if(IS_ERR(fid))
+ return PTR_ERR(fid);
if (!v9ses->extended) {
retval = -EBADF;
dprintk(DEBUG_ERROR, "not extended\n");
- goto FreeFcall;
+ goto ClunkFid;
}
dprintk(DEBUG_VFS, " %s\n", dentry->d_name.name);
goto FreeFcall;
}
- if (!fcall)
- return -EIO;
+ if (!fcall) {
+ retval = -EIO;
+ goto ClunkFid;
+ }
if (!(fcall->params.rstat.stat.mode & V9FS_DMSYMLINK)) {
retval = -EINVAL;
fcall->params.rstat.stat.extension.str, buffer);
retval = buflen;
- FreeFcall:
+FreeFcall:
kfree(fcall);
+ClunkFid:
+ v9fs_fid_clunk(v9ses, fid);
+
return retval;
}
int err;
u32 fid, perm;
struct v9fs_session_info *v9ses;
- struct v9fs_fid *dfid, *vfid;
- struct inode *inode;
+ struct v9fs_fid *dfid, *vfid = NULL;
+ struct inode *inode = NULL;
- inode = NULL;
- vfid = NULL;
v9ses = v9fs_inode2v9ses(dir);
- dfid = v9fs_fid_lookup(dentry->d_parent);
- perm = unixmode2p9mode(v9ses, mode);
-
if (!v9ses->extended) {
dprintk(DEBUG_ERROR, "not extended\n");
return -EPERM;
}
+ dfid = v9fs_fid_clone(dentry->d_parent);
+ if(IS_ERR(dfid)) {
+ err = PTR_ERR(dfid);
+ goto error;
+ }
+
+ perm = unixmode2p9mode(v9ses, mode);
+
err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
perm, V9FS_OREAD, (char *) extension, &fid, NULL, NULL);
if (err)
- goto error;
+ goto clunk_dfid;
err = v9fs_t_clunk(v9ses, fid);
if (err)
- goto error;
+ goto clunk_dfid;
vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
if (IS_ERR(vfid)) {
err = PTR_ERR(vfid);
vfid = NULL;
- goto error;
+ goto clunk_dfid;
}
inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
inode = NULL;
- goto error;
+ goto free_vfid;
}
dentry->d_op = &v9fs_dentry_operations;
d_instantiate(dentry, inode);
return 0;
-error:
- if (vfid)
- v9fs_fid_destroy(vfid);
+free_vfid:
+ v9fs_fid_destroy(vfid);
+
+clunk_dfid:
+ v9fs_fid_clunk(v9ses, dfid);
+error:
return err;
}
struct dentry *dentry)
{
int retval;
+ struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dir);
struct v9fs_fid *oldfid;
char *name;
dprintk(DEBUG_VFS, " %lu,%s,%s\n", dir->i_ino, dentry->d_name.name,
old_dentry->d_name.name);
- oldfid = v9fs_fid_lookup(old_dentry);
- if (!oldfid) {
- dprintk(DEBUG_ERROR, "can't find oldfid\n");
- return -EPERM;
- }
+ oldfid = v9fs_fid_clone(old_dentry);
+ if(IS_ERR(oldfid))
+ return PTR_ERR(oldfid);
name = __getname();
- if (unlikely(!name))
- return -ENOMEM;
+ if (unlikely(!name)) {
+ retval = -ENOMEM;
+ goto clunk_fid;
+ }
sprintf(name, "%d\n", oldfid->fid);
retval = v9fs_vfs_mkspecial(dir, dentry, V9FS_DMLINK, name);
__putname(name);
+clunk_fid:
+ v9fs_fid_clunk(v9ses, oldfid);
return retval;
}
config JFFS_FS
tristate "Journalling Flash File System (JFFS) support"
- depends on MTD && BLOCK
+ depends on MTD && BLOCK && BROKEN
help
JFFS is the Journalling Flash File System developed by Axis
Communications in Sweden, aimed at providing a crash/powerdown-safe
file system for disk-less embedded devices. Further information is
available at (<http://developer.axis.com/software/jffs/>).
+ NOTE: This filesystem is deprecated and is scheduled for removal in
+ 2.6.21. See Documentation/feature-removal-schedule.txt
+
config JFFS_FS_VERBOSE
int "JFFS debugging verbosity (0 = quiet, 3 = noisy)"
depends on JFFS_FS
{
char *old_buf = buf;
- while (*ptr >= ' ' && maxlen--) {
+ while ((unsigned char)*ptr >= ' ' && maxlen--) {
if (*ptr == '/')
*buf++ = '.';
else
* by the calling kernel thread
* (Note: this routine is intended to be called only
* from a kernel thread context)
- *
- * Comments: Called with ctx->ctx_lock held. This nests
- * task_lock instead ctx_lock.
*/
static void unuse_mm(struct mm_struct *mm)
{
{
struct kioctx *ctx = container_of(work, struct kioctx, wq.work);
mm_segment_t oldfs = get_fs();
+ struct mm_struct *mm;
int requeue;
set_fs(USER_DS);
use_mm(ctx->mm);
spin_lock_irq(&ctx->ctx_lock);
requeue =__aio_run_iocbs(ctx);
- unuse_mm(ctx->mm);
+ mm = ctx->mm;
spin_unlock_irq(&ctx->ctx_lock);
+ unuse_mm(mm);
set_fs(oldfs);
/*
* we're in a worker thread already, don't use queue_delayed_work,
#include <linux/time.h>
#include <linux/smp_lock.h>
#include <linux/namei.h>
+#include <linux/poll.h>
-static int return_EIO(void)
+
+static loff_t bad_file_llseek(struct file *file, loff_t offset, int origin)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_read(struct file *filp, char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_write(struct file *filp, const char __user *buf,
+ size_t siz, loff_t *ppos)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ return -EIO;
+}
+
+static int bad_file_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+ return -EIO;
+}
+
+static unsigned int bad_file_poll(struct file *filp, poll_table *wait)
+{
+ return POLLERR;
+}
+
+static int bad_file_ioctl (struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ return -EIO;
+}
+
+static long bad_file_unlocked_ioctl(struct file *file, unsigned cmd,
+ unsigned long arg)
+{
+ return -EIO;
+}
+
+static long bad_file_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ return -EIO;
+}
+
+static int bad_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ return -EIO;
+}
+
+static int bad_file_open(struct inode *inode, struct file *filp)
+{
+ return -EIO;
+}
+
+static int bad_file_flush(struct file *file, fl_owner_t id)
+{
+ return -EIO;
+}
+
+static int bad_file_release(struct inode *inode, struct file *filp)
+{
+ return -EIO;
+}
+
+static int bad_file_fsync(struct file *file, struct dentry *dentry,
+ int datasync)
+{
+ return -EIO;
+}
+
+static int bad_file_aio_fsync(struct kiocb *iocb, int datasync)
+{
+ return -EIO;
+}
+
+static int bad_file_fasync(int fd, struct file *filp, int on)
+{
+ return -EIO;
+}
+
+static int bad_file_lock(struct file *file, int cmd, struct file_lock *fl)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_sendfile(struct file *in_file, loff_t *ppos,
+ size_t count, read_actor_t actor, void *target)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_sendpage(struct file *file, struct page *page,
+ int off, size_t len, loff_t *pos, int more)
+{
+ return -EIO;
+}
+
+static unsigned long bad_file_get_unmapped_area(struct file *file,
+ unsigned long addr, unsigned long len,
+ unsigned long pgoff, unsigned long flags)
+{
+ return -EIO;
+}
+
+static int bad_file_check_flags(int flags)
{
return -EIO;
}
-#define EIO_ERROR ((void *) (return_EIO))
+static int bad_file_dir_notify(struct file *file, unsigned long arg)
+{
+ return -EIO;
+}
+
+static int bad_file_flock(struct file *filp, int cmd, struct file_lock *fl)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_splice_write(struct pipe_inode_info *pipe,
+ struct file *out, loff_t *ppos, size_t len,
+ unsigned int flags)
+{
+ return -EIO;
+}
+
+static ssize_t bad_file_splice_read(struct file *in, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len,
+ unsigned int flags)
+{
+ return -EIO;
+}
static const struct file_operations bad_file_ops =
{
- .llseek = EIO_ERROR,
- .aio_read = EIO_ERROR,
- .read = EIO_ERROR,
- .write = EIO_ERROR,
- .aio_write = EIO_ERROR,
- .readdir = EIO_ERROR,
- .poll = EIO_ERROR,
- .ioctl = EIO_ERROR,
- .mmap = EIO_ERROR,
- .open = EIO_ERROR,
- .flush = EIO_ERROR,
- .release = EIO_ERROR,
- .fsync = EIO_ERROR,
- .aio_fsync = EIO_ERROR,
- .fasync = EIO_ERROR,
- .lock = EIO_ERROR,
- .sendfile = EIO_ERROR,
- .sendpage = EIO_ERROR,
- .get_unmapped_area = EIO_ERROR,
+ .llseek = bad_file_llseek,
+ .read = bad_file_read,
+ .write = bad_file_write,
+ .aio_read = bad_file_aio_read,
+ .aio_write = bad_file_aio_write,
+ .readdir = bad_file_readdir,
+ .poll = bad_file_poll,
+ .ioctl = bad_file_ioctl,
+ .unlocked_ioctl = bad_file_unlocked_ioctl,
+ .compat_ioctl = bad_file_compat_ioctl,
+ .mmap = bad_file_mmap,
+ .open = bad_file_open,
+ .flush = bad_file_flush,
+ .release = bad_file_release,
+ .fsync = bad_file_fsync,
+ .aio_fsync = bad_file_aio_fsync,
+ .fasync = bad_file_fasync,
+ .lock = bad_file_lock,
+ .sendfile = bad_file_sendfile,
+ .sendpage = bad_file_sendpage,
+ .get_unmapped_area = bad_file_get_unmapped_area,
+ .check_flags = bad_file_check_flags,
+ .dir_notify = bad_file_dir_notify,
+ .flock = bad_file_flock,
+ .splice_write = bad_file_splice_write,
+ .splice_read = bad_file_splice_read,
};
+static int bad_inode_create (struct inode *dir, struct dentry *dentry,
+ int mode, struct nameidata *nd)
+{
+ return -EIO;
+}
+
+static struct dentry *bad_inode_lookup(struct inode *dir,
+ struct dentry *dentry, struct nameidata *nd)
+{
+ return ERR_PTR(-EIO);
+}
+
+static int bad_inode_link (struct dentry *old_dentry, struct inode *dir,
+ struct dentry *dentry)
+{
+ return -EIO;
+}
+
+static int bad_inode_unlink(struct inode *dir, struct dentry *dentry)
+{
+ return -EIO;
+}
+
+static int bad_inode_symlink (struct inode *dir, struct dentry *dentry,
+ const char *symname)
+{
+ return -EIO;
+}
+
+static int bad_inode_mkdir(struct inode *dir, struct dentry *dentry,
+ int mode)
+{
+ return -EIO;
+}
+
+static int bad_inode_rmdir (struct inode *dir, struct dentry *dentry)
+{
+ return -EIO;
+}
+
+static int bad_inode_mknod (struct inode *dir, struct dentry *dentry,
+ int mode, dev_t rdev)
+{
+ return -EIO;
+}
+
+static int bad_inode_rename (struct inode *old_dir, struct dentry *old_dentry,
+ struct inode *new_dir, struct dentry *new_dentry)
+{
+ return -EIO;
+}
+
+static int bad_inode_readlink(struct dentry *dentry, char __user *buffer,
+ int buflen)
+{
+ return -EIO;
+}
+
+static int bad_inode_permission(struct inode *inode, int mask,
+ struct nameidata *nd)
+{
+ return -EIO;
+}
+
+static int bad_inode_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ return -EIO;
+}
+
+static int bad_inode_setattr(struct dentry *direntry, struct iattr *attrs)
+{
+ return -EIO;
+}
+
+static int bad_inode_setxattr(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags)
+{
+ return -EIO;
+}
+
+static ssize_t bad_inode_getxattr(struct dentry *dentry, const char *name,
+ void *buffer, size_t size)
+{
+ return -EIO;
+}
+
+static ssize_t bad_inode_listxattr(struct dentry *dentry, char *buffer,
+ size_t buffer_size)
+{
+ return -EIO;
+}
+
+static int bad_inode_removexattr(struct dentry *dentry, const char *name)
+{
+ return -EIO;
+}
+
static struct inode_operations bad_inode_ops =
{
- .create = EIO_ERROR,
- .lookup = EIO_ERROR,
- .link = EIO_ERROR,
- .unlink = EIO_ERROR,
- .symlink = EIO_ERROR,
- .mkdir = EIO_ERROR,
- .rmdir = EIO_ERROR,
- .mknod = EIO_ERROR,
- .rename = EIO_ERROR,
- .readlink = EIO_ERROR,
+ .create = bad_inode_create,
+ .lookup = bad_inode_lookup,
+ .link = bad_inode_link,
+ .unlink = bad_inode_unlink,
+ .symlink = bad_inode_symlink,
+ .mkdir = bad_inode_mkdir,
+ .rmdir = bad_inode_rmdir,
+ .mknod = bad_inode_mknod,
+ .rename = bad_inode_rename,
+ .readlink = bad_inode_readlink,
/* follow_link must be no-op, otherwise unmounting this inode
won't work */
- .truncate = EIO_ERROR,
- .permission = EIO_ERROR,
- .getattr = EIO_ERROR,
- .setattr = EIO_ERROR,
- .setxattr = EIO_ERROR,
- .getxattr = EIO_ERROR,
- .listxattr = EIO_ERROR,
- .removexattr = EIO_ERROR,
+ /* put_link returns void */
+ /* truncate returns void */
+ .permission = bad_inode_permission,
+ .getattr = bad_inode_getattr,
+ .setattr = bad_inode_setattr,
+ .setxattr = bad_inode_setxattr,
+ .getxattr = bad_inode_getxattr,
+ .listxattr = bad_inode_listxattr,
+ .removexattr = bad_inode_removexattr,
+ /* truncate_range returns void */
};
* on it to fail from this point on.
*/
-void make_bad_inode(struct inode * inode)
+void make_bad_inode(struct inode *inode)
{
remove_inode_hash(inode);
* Returns true if the inode in question has been marked as bad.
*/
-int is_bad_inode(struct inode * inode)
+int is_bad_inode(struct inode *inode)
{
return (inode->i_op == &bad_inode_ops);
}
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter))
goto out_free_interp;
+
+ /*
+ * If the binary is not readable then enforce
+ * mm->dumpable = 0 regardless of the interpreter's
+ * permissions.
+ */
+ if (file_permission(interpreter, MAY_READ) < 0)
+ bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP;
+
retval = kernel_read(interpreter, 0, bprm->buf,
BINPRM_BUF_SIZE);
if (retval != BINPRM_BUF_SIZE) {
* default mmap base, as well as whatever program they
* might try to exec. This is because the brk will
* follow the loader, and is not movable. */
- if (current->flags & PF_RANDOMIZE)
- load_bias = randomize_range(0x10000,
- ELF_ET_DYN_BASE,
- 0);
- else
- load_bias = ELF_ET_DYN_BASE;
- load_bias = ELF_PAGESTART(load_bias - vaddr);
+ load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
}
error = elf_map(bprm->file, load_bias + vaddr, elf_ppnt,
*/
static int maydump(struct vm_area_struct *vma)
{
+ /* The vma can be set up to tell us the answer directly. */
+ if (vma->vm_flags & VM_ALWAYSDUMP)
+ return 1;
+
/* Do not dump I/O mapped devices or special mappings */
if (vma->vm_flags & (VM_IO | VM_RESERVED))
return 0;
return sz;
}
+static struct vm_area_struct *first_vma(struct task_struct *tsk,
+ struct vm_area_struct *gate_vma)
+{
+ struct vm_area_struct *ret = tsk->mm->mmap;
+
+ if (ret)
+ return ret;
+ return gate_vma;
+}
+/*
+ * Helper function for iterating across a vma list. It ensures that the caller
+ * will visit `gate_vma' prior to terminating the search.
+ */
+static struct vm_area_struct *next_vma(struct vm_area_struct *this_vma,
+ struct vm_area_struct *gate_vma)
+{
+ struct vm_area_struct *ret;
+
+ ret = this_vma->vm_next;
+ if (ret)
+ return ret;
+ if (this_vma == gate_vma)
+ return NULL;
+ return gate_vma;
+}
+
/*
* Actual dumper
*
int segs;
size_t size = 0;
int i;
- struct vm_area_struct *vma;
+ struct vm_area_struct *vma, *gate_vma;
struct elfhdr *elf = NULL;
loff_t offset = 0, dataoff, foffset;
unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
segs += ELF_CORE_EXTRA_PHDRS;
#endif
+ gate_vma = get_gate_vma(current);
+ if (gate_vma != NULL)
+ segs++;
+
/* Set up header */
fill_elf_header(elf, segs + 1); /* including notes section */
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
/* Write program headers for segments dump */
- for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (vma = first_vma(current, gate_vma); vma != NULL;
+ vma = next_vma(vma, gate_vma)) {
struct elf_phdr phdr;
size_t sz;
/* Align to page */
DUMP_SEEK(dataoff - foffset);
- for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (vma = first_vma(current, gate_vma); vma != NULL;
+ vma = next_vma(vma, gate_vma)) {
unsigned long addr;
if (!maydump(vma))
goto error;
}
+ /*
+ * If the binary is not readable then enforce
+ * mm->dumpable = 0 regardless of the interpreter's
+ * permissions.
+ */
+ if (file_permission(interpreter, MAY_READ) < 0)
+ bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP;
+
retval = kernel_read(interpreter, 0, bprm->buf,
BINPRM_BUF_SIZE);
if (retval < 0)
iocb->ki_nbytes = -EIO;
if (atomic_dec_and_test(bio_count)) {
- if (iocb->ki_nbytes < 0)
+ if ((long)iocb->ki_nbytes < 0)
aio_complete(iocb, iocb->ki_nbytes, 0);
else
aio_complete(iocb, iocb->ki_left, 0);
return pvec->page[pvec->idx++];
}
+/* return a page back to pvec array */
+static void blk_unget_page(struct page *page, struct pvec *pvec)
+{
+ pvec->page[--pvec->idx] = page;
+}
+
static ssize_t
blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
loff_t pos, unsigned long nr_segs)
count = min(count, nbytes);
goto same_bio;
}
+ } else {
+ blk_unget_page(page, &pvec);
}
/* bio is ready, submit it */
{
memset(bdev, 0, sizeof(*bdev));
mutex_init(&bdev->bd_mutex);
- mutex_init(&bdev->bd_mount_mutex);
+ sema_init(&bdev->bd_mount_sem, 1);
INIT_LIST_HEAD(&bdev->bd_inodes);
INIT_LIST_HEAD(&bdev->bd_list);
#ifdef CONFIG_SYSFS
* freeze_bdev -- lock a filesystem and force it into a consistent state
* @bdev: blockdevice to lock
*
- * This takes the block device bd_mount_mutex to make sure no new mounts
+ * This takes the block device bd_mount_sem to make sure no new mounts
* happen on bdev until thaw_bdev() is called.
* If a superblock is found on this device, we take the s_umount semaphore
* on it to make sure nobody unmounts until the snapshot creation is done.
{
struct super_block *sb;
- mutex_lock(&bdev->bd_mount_mutex);
+ down(&bdev->bd_mount_sem);
sb = get_super(bdev);
if (sb && !(sb->s_flags & MS_RDONLY)) {
sb->s_frozen = SB_FREEZE_WRITE;
drop_super(sb);
}
- mutex_unlock(&bdev->bd_mount_mutex);
+ up(&bdev->bd_mount_sem);
}
EXPORT_SYMBOL(thaw_bdev);
spin_lock(&mapping->private_lock);
ret = drop_buffers(page, &buffers_to_free);
+
+ /*
+ * If the filesystem writes its buffers by hand (eg ext3)
+ * then we can have clean buffers against a dirty page. We
+ * clean the page here; otherwise the VM will never notice
+ * that the filesystem did any IO at all.
+ *
+ * Also, during truncate, discard_buffer will have marked all
+ * the page's buffers clean. We discover that here and clean
+ * the page also.
+ *
+ * private_lock must be held over this entire operation in order
+ * to synchronise against __set_page_dirty_buffers and prevent the
+ * dirty bit from being lost.
+ */
+ if (ret)
+ cancel_dirty_page(page, PAGE_CACHE_SIZE);
spin_unlock(&mapping->private_lock);
- if (ret) {
- /*
- * If the filesystem writes its buffers by hand (eg ext3)
- * then we can have clean buffers against a dirty page. We
- * clean the page here; otherwise later reattachment of buffers
- * could encounter a non-uptodate page, which is unresolvable.
- * This only applies in the rare case where try_to_free_buffers
- * succeeds but the page is not freed.
- *
- * Also, during truncate, discard_buffer will have marked all
- * the page's buffers clean. We discover that here and clean
- * the page also.
- */
- if (test_clear_page_dirty(page))
- task_io_account_cancelled_write(PAGE_CACHE_SIZE);
- }
out:
if (buffers_to_free) {
struct buffer_head *bh = buffers_to_free;
+Version 1.47
+------------
+Fix oops in list_del during mount caused by unaligned string.
+
Version 1.46
------------
Support deep tree mounts. Better support OS/2, Win9x (DOS) time stamps.
ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
if((ses->serverDomain == NULL) || (ses->serverOS == NULL) ||
(ses->serverNOS == NULL)) {
- buf += sprintf("\nentry for %s not fully displayed\n\t",
- ses->serverName);
+ buf += sprintf(buf, "\nentry for %s not fully "
+ "displayed\n\t", ses->serverName);
} else {
length =
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern int cifs_ioctl (struct inode * inode, struct file * filep,
unsigned int command, unsigned long arg);
-#define CIFS_VERSION "1.46"
+#define CIFS_VERSION "1.47"
#endif /* _CIFSFS_H */
wait_on_page_writeback(page);
if (PageWriteback(page) ||
- !test_clear_page_dirty(page)) {
+ !clear_page_dirty_for_io(page)) {
unlock_page(page);
break;
}
+ /*
+ * This actually clears the dirty bit in the radix tree.
+ * See cifs_writepage() for more commentary.
+ */
+ set_page_writeback(page);
+
if (page_offset(page) >= mapping->host->i_size) {
done = 1;
unlock_page(page);
+ end_page_writeback(page);
break;
}
SetPageError(page);
kunmap(page);
unlock_page(page);
+ end_page_writeback(page);
page_cache_release(page);
}
if ((wbc->nr_to_write -= n_iov) <= 0)
if (!PageUptodate(page)) {
cFYI(1, ("ppw - page not up to date"));
}
-
+
+ /*
+ * Set the "writeback" flag, and clear "dirty" in the radix tree.
+ *
+ * A writepage() implementation always needs to do either this,
+ * or re-dirty the page with "redirty_page_for_writepage()" in
+ * the case of a failure.
+ *
+ * Just unlocking the page will cause the radix tree tag-bits
+ * to fail to update with the state of the page correctly.
+ */
+ set_page_writeback(page);
rc = cifs_partialpagewrite(page, 0, PAGE_CACHE_SIZE);
SetPageUptodate(page); /* BB add check for error and Clearuptodate? */
unlock_page(page);
- page_cache_release(page);
+ end_page_writeback(page);
+ page_cache_release(page);
FreeXid(xid);
return rc;
}
{
struct cifsSesInfo *ret_buf;
- ret_buf =
- (struct cifsSesInfo *) kzalloc(sizeof (struct cifsSesInfo),
- GFP_KERNEL);
+ ret_buf = kzalloc(sizeof (struct cifsSesInfo), GFP_KERNEL);
if (ret_buf) {
write_lock(&GlobalSMBSeslock);
atomic_inc(&sesInfoAllocCount);
tconInfoAlloc(void)
{
struct cifsTconInfo *ret_buf;
- ret_buf =
- (struct cifsTconInfo *) kzalloc(sizeof (struct cifsTconInfo),
- GFP_KERNEL);
+ ret_buf = kzalloc(sizeof (struct cifsTconInfo), GFP_KERNEL);
if (ret_buf) {
write_lock(&GlobalSMBSeslock);
atomic_inc(&tconInfoAllocCount);
cFYI(1,("bleft %d",bleft));
- /* word align, if bytes remaining is not even */
- if(bleft % 2) {
- bleft--;
- data++;
- }
+ /* SMB header is unaligned, so cifs servers word align start of
+ Unicode strings */
+ data++;
+ bleft--; /* Windows servers do not always double null terminate
+ their final Unicode string - in which case we
+ now will not attempt to decode the byte of junk
+ which follows it */
+
words_left = bleft / 2;
/* save off server operating system */
/* An array of pointers to connections, indexed by NODEID */
static struct connection **connections;
static DECLARE_MUTEX(connections_lock);
-static kmem_cache_t *con_cache;
+static struct kmem_cache *con_cache;
static int conn_array_size;
/* List of sockets that have reads pending */
copy_fdtable(new_fdt, cur_fdt);
rcu_assign_pointer(files->fdt, new_fdt);
if (cur_fdt->max_fds > NR_OPEN_DEFAULT)
- call_rcu(&cur_fdt->rcu, free_fdtable_rcu);
+ free_fdtable(cur_fdt);
} else {
/* Somebody else expanded, so undo our attempt */
free_fdarr(new_fdt);
WARN_ON(inode->i_state & I_WILL_FREE);
if ((wbc->sync_mode != WB_SYNC_ALL) && (inode->i_state & I_LOCK)) {
+ struct address_space *mapping = inode->i_mapping;
+ int ret;
+
list_move(&inode->i_list, &inode->i_sb->s_dirty);
- return 0;
+
+ /*
+ * Even if we don't actually write the inode itself here,
+ * we can at least start some of the data writeout..
+ */
+ spin_unlock(&inode_lock);
+ ret = do_writepages(mapping, wbc);
+ spin_lock(&inode_lock);
+ return ret;
}
/*
static void fuse_ctl_kill_sb(struct super_block *sb)
{
+ struct fuse_conn *fc;
+
mutex_lock(&fuse_mutex);
fuse_control_sb = NULL;
+ list_for_each_entry(fc, &fuse_conn_list, entry)
+ fc->ctl_ndents = 0;
mutex_unlock(&fuse_mutex);
kill_litter_super(sb);
i_size_write(inode, pos);
spin_unlock(&fc->lock);
- if (offset == 0 && to == PAGE_CACHE_SIZE) {
- clear_page_dirty(page);
+ if (offset == 0 && to == PAGE_CACHE_SIZE)
SetPageUptodate(page);
- }
}
fuse_invalidate_attr(inode);
return err;
config GFS2_FS_LOCKING_DLM
tristate "GFS2 DLM locking module"
- depends on GFS2_FS
+ depends on GFS2_FS && NET && INET && (IPV6 || IPV6=n)
+ select IP_SCTP if DLM_SCTP
+ select CONFIGFS_FS
select DLM
help
Multiple node locking module for GFS2
error = -EBUSY;
goto error;
}
- mutex_lock(&sb->s_bdev->bd_mount_mutex);
+ down(&sb->s_bdev->bd_mount_sem);
new = sget(fs_type, test_bdev_super, set_bdev_super, sb->s_bdev);
- mutex_unlock(&sb->s_bdev->bd_mount_mutex);
+ up(&sb->s_bdev->bd_mount_sem);
if (IS_ERR(new)) {
error = PTR_ERR(new);
goto error;
extern int unlink_file(const char *file);
extern int do_mkdir(const char *file, int mode);
extern int do_rmdir(const char *file);
-extern int do_mknod(const char *file, int mode, int dev);
+extern int do_mknod(const char *file, int mode, unsigned int major, unsigned int minor);
extern int link_file(const char *from, const char *to);
extern int do_readlink(char *file, char *buf, int size);
extern int rename_file(char *from, char *to);
goto out_put;
init_special_inode(inode, mode, dev);
- err = do_mknod(name, mode, dev);
+ err = do_mknod(name, mode, MAJOR(dev), MINOR(dev));
if(err)
goto out_free;
return(0);
}
-int do_mknod(const char *file, int mode, int dev)
+int do_mknod(const char *file, int mode, unsigned int major, unsigned int minor)
{
int err;
- err = mknod(file, mode, dev);
+ err = mknod(file, mode, makedev(major, minor));
if(err) return(-errno);
return(0);
}
static void truncate_huge_page(struct page *page)
{
- clear_page_dirty(page);
+ cancel_dirty_page(page, /* No IO accounting for huge pages? */0);
ClearPageUptodate(page);
remove_from_page_cache(page);
put_page(page);
bufs = 0;
goto write_out_data;
}
- }
- else {
+ } else if (!locked && buffer_locked(bh)) {
+ __journal_file_buffer(jh, commit_transaction,
+ BJ_Locked);
+ jbd_unlock_bh_state(bh);
+ put_bh(bh);
+ } else {
BUFFER_TRACE(bh, "writeout complete: unfile");
__journal_unfile_buffer(jh);
jbd_unlock_bh_state(bh);
*
*/
#include <linux/slab.h>
+#include <linux/err.h>
#include <linux/blkdev.h>
#include <linux/jffs.h>
#include "jffs_fm.h"
mtd = get_mtd_device(NULL, unit);
- if (!mtd) {
+ if (IS_ERR(mtd)) {
kfree(fmc);
DJM(no_jffs_fmcontrol--);
return NULL;
while (ref2) {
uint32_t totlen = ref_totlen(c, jeb, ref2);
- if (ref2->flash_offset < jeb->offset ||
- ref2->flash_offset > jeb->offset + c->sector_size) {
+ if (ref_offset(ref2) < jeb->offset ||
+ ref_offset(ref2) > jeb->offset + c->sector_size) {
JFFS2_ERROR("node_ref %#08x shouldn't be in block at %#08x.\n",
ref_offset(ref2), jeb->offset);
goto error;
#ifndef _JFFS2_DEBUG_H_
#define _JFFS2_DEBUG_H_
+#include <linux/sched.h>
#ifndef CONFIG_JFFS2_FS_DEBUG
#define CONFIG_JFFS2_FS_DEBUG 0
if (ret)
return ret;
- c->inocache_list = kmalloc(INOCACHE_HASHSIZE * sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
+ c->inocache_list = kcalloc(INOCACHE_HASHSIZE, sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
if (!c->inocache_list) {
ret = -ENOMEM;
goto out_wbuf;
}
- memset(c->inocache_list, 0, INOCACHE_HASHSIZE * sizeof(struct jffs2_inode_cache *));
jffs2_init_xattr_subsystem(c);
for (raw = f->inocache->nodes; raw != (void *)f->inocache; raw = raw->next_in_ino) {
+ cond_resched();
+
/* We only care about obsolete ones */
if (!(ref_obsolete(raw)))
continue;
static inline struct jffs2_node_frag *frag_first(struct rb_root *root)
{
- struct rb_node *node = root->rb_node;
+ struct rb_node *node = rb_first(root);
if (!node)
return NULL;
- while(node->rb_left)
- node = node->rb_left;
+
return rb_entry(node, struct jffs2_node_frag, rb);
}
static inline struct jffs2_node_frag *frag_last(struct rb_root *root)
{
- struct rb_node *node = root->rb_node;
+ struct rb_node *node = rb_last(root);
if (!node)
return NULL;
- while(node->rb_right)
- node = node->rb_right;
+
return rb_entry(node, struct jffs2_node_frag, rb);
}
int jffs2_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
struct jffs2_raw_inode n;
- struct jffs2_inode_info *f = kmalloc(sizeof(*f), GFP_KERNEL);
+ struct jffs2_inode_info *f = kzalloc(sizeof(*f), GFP_KERNEL);
int ret;
if (!f)
return -ENOMEM;
- memset(f, 0, sizeof(*f));
init_MUTEX_LOCKED(&f->sem);
f->inocache = ic;
}
if (jffs2_sum_active()) {
- s = kmalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
+ s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
if (!s) {
+ kfree(flashbuf);
JFFS2_WARNING("Can't allocate memory for summary\n");
return -ENOMEM;
}
- memset(s, 0, sizeof(struct jffs2_summary));
}
for (i=0; i<c->nr_blocks; i++) {
struct jffs2_eraseblock *jeb = &c->blocks[i];
+ cond_resched();
+
/* reset summary info for next eraseblock scan */
jffs2_sum_reset_collected(s);
int jffs2_sum_init(struct jffs2_sb_info *c)
{
- c->summary = kmalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
+ c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
if (!c->summary) {
JFFS2_WARNING("Can't allocate memory for summary information!\n");
return -ENOMEM;
}
- memset(c->summary, 0, sizeof(struct jffs2_summary));
-
c->summary->sum_buf = vmalloc(c->sector_size);
if (!c->summary->sum_buf) {
for (i=0; i<je32_to_cpu(summary->sum_num); i++) {
dbg_summary("processing summary index %d\n", i);
+ cond_resched();
+
/* Make sure there's a spare ref for dirty space */
err = jffs2_prealloc_raw_node_refs(c, jeb, 2);
if (err)
#include <linux/init.h>
#include <linux/list.h>
#include <linux/fs.h>
+#include <linux/err.h>
#include <linux/mount.h>
#include <linux/jffs2.h>
#include <linux/pagemap.h>
struct mtd_info *mtd;
mtd = get_mtd_device(NULL, mtdnr);
- if (!mtd) {
+ if (IS_ERR(mtd)) {
D1(printk(KERN_DEBUG "jffs2: MTD device #%u doesn't appear to exist\n", mtdnr));
- return -EINVAL;
+ return PTR_ERR(mtd);
}
return jffs2_get_sb_mtd(fs_type, flags, dev_name, data, mtd, mnt);
D1(printk(KERN_DEBUG "jffs2_get_sb(): mtd:%%s, name \"%s\"\n", dev_name+4));
for (mtdnr = 0; mtdnr < MAX_MTD_DEVICES; mtdnr++) {
mtd = get_mtd_device(NULL, mtdnr);
- if (mtd) {
+ if (!IS_ERR(mtd)) {
if (!strcmp(mtd->name, dev_name+4))
return jffs2_get_sb_mtd(fs_type, flags, dev_name, data, mtd, mnt);
put_mtd_device(mtd);
*/
if (!p) {
- printk(KERN_ERR "jffs2_follow_link(): can't find symlink taerget\n");
+ printk(KERN_ERR "jffs2_follow_link(): can't find symlink target\n");
p = ERR_PTR(-EIO);
}
D1(printk(KERN_DEBUG "jffs2_follow_link(): target path is '%s'\n", (char *) f->target));
int oobsize = c->mtd->oobsize;
struct mtd_oob_ops ops;
- ops.len = NR_OOB_SCAN_PAGES * oobsize;
- ops.ooblen = oobsize;
+ ops.ooblen = NR_OOB_SCAN_PAGES * oobsize;
ops.oobbuf = c->oobbuf;
ops.ooboffs = 0;
ops.datbuf = NULL;
return ret;
}
- if (ops.retlen < ops.len) {
+ if (ops.oobretlen < ops.ooblen) {
D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB "
"returned short read (%zd bytes not %d) for block "
- "at %08x\n", ops.retlen, ops.len, jeb->offset));
+ "at %08x\n", ops.oobretlen, ops.ooblen, jeb->offset));
return -EIO;
}
}
/* we know, we are aligned :) */
- for (page = oobsize; page < ops.len; page += sizeof(long)) {
+ for (page = oobsize; page < ops.ooblen; page += sizeof(long)) {
long dat = *(long *)(&ops.oobbuf[page]);
if(dat != -1)
return 1;
return 2;
}
- ops.len = oobsize;
ops.ooblen = oobsize;
ops.oobbuf = c->oobbuf;
ops.ooboffs = 0;
return ret;
}
- if (ops.retlen < ops.len) {
+ if (ops.oobretlen < ops.ooblen) {
D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): "
"Read OOB return short read (%zd bytes not %d) "
- "for block at %08x\n", ops.retlen, ops.len,
+ "for block at %08x\n", ops.oobretlen, ops.ooblen,
jeb->offset));
return -EIO;
}
n.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
n.totlen = cpu_to_je32(8);
- ops.len = c->fsdata_len;
- ops.ooblen = c->fsdata_len;;
+ ops.ooblen = c->fsdata_len;
ops.oobbuf = (uint8_t *)&n;
ops.ooboffs = c->fsdata_pos;
ops.datbuf = NULL;
jeb->offset, ret));
return ret;
}
- if (ops.retlen != ops.len) {
+ if (ops.oobretlen != ops.ooblen) {
D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): "
"Short write for block at %08x: %zd not %d\n",
- jeb->offset, ops.retlen, ops.len));
+ jeb->offset, ops.oobretlen, ops.ooblen));
return -EIO;
}
return 0;
{
/* must be called under down_write(xattr_sem) */
if (atomic_dec_and_lock(&xd->refcnt, &c->erase_completion_lock)) {
- uint32_t xid = xd->xid, version = xd->version;
-
unload_xattr_datum(c, xd);
xd->flags |= JFFS2_XFLAGS_DEAD;
if (xd->node == (void *)xd) {
}
spin_unlock(&c->erase_completion_lock);
- dbg_xattr("xdatum(xid=%u, version=%u) was removed.\n", xid, version);
+ dbg_xattr("xdatum(xid=%u, version=%u) was removed.\n",
+ xd->xid, xd->version);
}
}
} else if (mp->lsn) /* discard_metapage doesn't remove it */
remove_from_logsync(mp);
-#if MPS_PER_PAGE == 1
- /*
- * If we know this is the only thing in the page, we can throw
- * the page out of the page cache. If pages are larger, we
- * don't want to do this.
- */
-
- /* Retest mp->count since we may have released page lock */
- if (test_bit(META_discard, &mp->flag) && !mp->count) {
- clear_page_dirty(page);
- ClearPageUptodate(page);
- }
-#else
/* Try to keep metapages from using up too much memory */
drop_metapage(page, mp);
-#endif
+
unlock_page(page);
page_cache_release(page);
}
lock_kernel();
lockd_up(0); /* note: this cannot fail as lockd is already running */
- dprintk("lockd: reclaiming locks for host %s", host->h_name);
+ dprintk("lockd: reclaiming locks for host %s\n", host->h_name);
restart:
nsmstate = host->h_nsmstate;
host->h_reclaiming = 0;
up_write(&host->h_rwsem);
- dprintk("NLM: done reclaiming locks for host %s", host->h_name);
+ dprintk("NLM: done reclaiming locks for host %s\n", host->h_name);
/* Now, wake up all processes that sleep on a blocked lock */
list_for_each_entry(block, &nlm_blocked, b_list) {
lock_kernel();
- res = nfs_revalidate_mapping(inode, filp->f_mapping);
+ res = nfs_revalidate_mapping_nolock(inode, filp->f_mapping);
if (res < 0) {
unlock_kernel();
return res;
static int nfs_release_page(struct page *page, gfp_t gfp)
{
- /*
- * Avoid deadlock on nfs_wait_on_request().
- */
- if (!(gfp & __GFP_FS))
- return 0;
- /* Hack... Force nfs_wb_page() to write out the page */
- SetPageDirty(page);
- return !nfs_wb_page(page->mapping->host, page);
+ /* If PagePrivate() is set, then the page is not freeable */
+ return 0;
+}
+
+static int nfs_launder_page(struct page *page)
+{
+ return nfs_wb_page(page->mapping->host, page);
}
const struct address_space_operations nfs_file_aops = {
#ifdef CONFIG_NFS_DIRECTIO
.direct_IO = nfs_direct_IO,
#endif
+ .launder_page = nfs_launder_page,
};
static ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
return __nfs_revalidate_inode(server, inode);
}
+static int nfs_invalidate_mapping_nolock(struct inode *inode, struct address_space *mapping)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+
+ if (mapping->nrpages != 0) {
+ int ret = invalidate_inode_pages2(mapping);
+ if (ret < 0)
+ return ret;
+ }
+ spin_lock(&inode->i_lock);
+ nfsi->cache_validity &= ~NFS_INO_INVALID_DATA;
+ if (S_ISDIR(inode->i_mode)) {
+ memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf));
+ /* This ensures we revalidate child dentries */
+ nfsi->cache_change_attribute = jiffies;
+ }
+ spin_unlock(&inode->i_lock);
+ nfs_inc_stats(inode, NFSIOS_DATAINVALIDATE);
+ dfprintk(PAGECACHE, "NFS: (%s/%Ld) data cache invalidated\n",
+ inode->i_sb->s_id, (long long)NFS_FILEID(inode));
+ return 0;
+}
+
+static int nfs_invalidate_mapping(struct inode *inode, struct address_space *mapping)
+{
+ int ret = 0;
+
+ mutex_lock(&inode->i_mutex);
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_DATA) {
+ ret = nfs_sync_mapping(mapping);
+ if (ret == 0)
+ ret = nfs_invalidate_mapping_nolock(inode, mapping);
+ }
+ mutex_unlock(&inode->i_mutex);
+ return ret;
+}
+
/**
- * nfs_revalidate_mapping - Revalidate the pagecache
+ * nfs_revalidate_mapping_nolock - Revalidate the pagecache
* @inode - pointer to host inode
* @mapping - pointer to mapping
*/
-int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping)
+int nfs_revalidate_mapping_nolock(struct inode *inode, struct address_space *mapping)
{
struct nfs_inode *nfsi = NFS_I(inode);
int ret = 0;
- if (NFS_STALE(inode))
- ret = -ESTALE;
if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE)
- || nfs_attribute_timeout(inode))
+ || nfs_attribute_timeout(inode) || NFS_STALE(inode)) {
ret = __nfs_revalidate_inode(NFS_SERVER(inode), inode);
- if (ret < 0)
- goto out;
+ if (ret < 0)
+ goto out;
+ }
+ if (nfsi->cache_validity & NFS_INO_INVALID_DATA)
+ ret = nfs_invalidate_mapping_nolock(inode, mapping);
+out:
+ return ret;
+}
- if (nfsi->cache_validity & NFS_INO_INVALID_DATA) {
- if (mapping->nrpages != 0) {
- if (S_ISREG(inode->i_mode)) {
- ret = nfs_sync_mapping(mapping);
- if (ret < 0)
- goto out;
- }
- ret = invalidate_inode_pages2(mapping);
- if (ret < 0)
- goto out;
- }
- spin_lock(&inode->i_lock);
- nfsi->cache_validity &= ~NFS_INO_INVALID_DATA;
- if (S_ISDIR(inode->i_mode)) {
- memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf));
- /* This ensures we revalidate child dentries */
- nfsi->cache_change_attribute = jiffies;
- }
- spin_unlock(&inode->i_lock);
+/**
+ * nfs_revalidate_mapping - Revalidate the pagecache
+ * @inode - pointer to host inode
+ * @mapping - pointer to mapping
+ *
+ * This version of the function will take the inode->i_mutex and attempt to
+ * flush out all dirty data if it needs to invalidate the page cache.
+ */
+int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ int ret = 0;
- nfs_inc_stats(inode, NFSIOS_DATAINVALIDATE);
- dfprintk(PAGECACHE, "NFS: (%s/%Ld) data cache invalidated\n",
- inode->i_sb->s_id,
- (long long)NFS_FILEID(inode));
+ if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE)
+ || nfs_attribute_timeout(inode) || NFS_STALE(inode)) {
+ ret = __nfs_revalidate_inode(NFS_SERVER(inode), inode);
+ if (ret < 0)
+ goto out;
}
+ if (nfsi->cache_validity & NFS_INO_INVALID_DATA)
+ ret = nfs_invalidate_mapping(inode, mapping);
out:
return ret;
}
{
struct inode *inode = dentry->d_inode;
struct page *page;
- void *err = ERR_PTR(nfs_revalidate_mapping(inode, inode->i_mapping));
+ void *err;
+
+ err = ERR_PTR(nfs_revalidate_mapping_nolock(inode, inode->i_mapping));
if (err)
goto read_failed;
page = read_cache_page(&inode->i_data, 0,
#include <linux/lockd/bind.h>
#define NFSDDBG_FACILITY NFSDDBG_EXPORT
-#define NFSD_PARANOIA 1
typedef struct auth_domain svc_client;
typedef struct svc_export svc_export;
}
int
-nfs3svc_encode_entry(struct readdir_cd *cd, const char *name,
- int namlen, loff_t offset, ino_t ino, unsigned int d_type)
+nfs3svc_encode_entry(void *cd, const char *name,
+ int namlen, loff_t offset, u64 ino, unsigned int d_type)
{
return encode_entry(cd, name, namlen, offset, ino, d_type, 0);
}
int
-nfs3svc_encode_entry_plus(struct readdir_cd *cd, const char *name,
- int namlen, loff_t offset, ino_t ino, unsigned int d_type)
+nfs3svc_encode_entry_plus(void *cd, const char *name,
+ int namlen, loff_t offset, u64 ino,
+ unsigned int d_type)
{
return encode_entry(cd, name, namlen, offset, ino, d_type, 1);
}
}
static int
-nfsd4_encode_dirent(struct readdir_cd *ccd, const char *name, int namlen,
- loff_t offset, ino_t ino, unsigned int d_type)
+nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
+ loff_t offset, u64 ino, unsigned int d_type)
{
+ struct readdir_cd *ccd = ccdv;
struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
int buflen;
__be32 *p = cd->buffer;
#include <linux/nfsd/nfsd.h>
#define NFSDDBG_FACILITY NFSDDBG_FH
-#define NFSD_PARANOIA 1
-/* #define NFSD_DEBUG_VERBOSE 1 */
static int nfsd_nr_verified;
error = nfserrno(PTR_ERR(dentry));
goto out;
}
-#ifdef NFSD_PARANOIA
+
if (S_ISDIR(dentry->d_inode->i_mode) &&
(dentry->d_flags & DCACHE_DISCONNECTED)) {
printk("nfsd: find_fh_dentry returned a DISCONNECTED directory: %s/%s\n",
dentry->d_parent->d_name.name, dentry->d_name.name);
}
-#endif
fhp->fh_dentry = dentry;
fhp->fh_export = exp;
/* Finally, check access permissions. */
error = nfsd_permission(exp, dentry, access);
-#ifdef NFSD_PARANOIA_EXTREME
if (error) {
- printk("fh_verify: %s/%s permission failure, acc=%x, error=%d\n",
- dentry->d_parent->d_name.name, dentry->d_name.name, access, (error >> 24));
+ dprintk("fh_verify: %s/%s permission failure, "
+ "acc=%x, error=%d\n",
+ dentry->d_parent->d_name.name,
+ dentry->d_name.name,
+ access, (error >> 24));
}
-#endif
out:
if (exp && !IS_ERR(exp))
exp_put(exp);
.pg_prog = NFS_ACL_PROGRAM,
.pg_nvers = NFSD_ACL_NRVERS,
.pg_vers = nfsd_acl_versions,
- .pg_name = "nfsd",
+ .pg_name = "nfsacl",
.pg_class = "nfsd",
.pg_stats = &nfsd_acl_svcstats,
.pg_authenticate = &svc_set_client,
switch(change) {
case NFSD_SET:
nfsd_versions[vers] = nfsd_version[vers];
- break;
#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
if (vers < NFSD_ACL_NRVERS)
- nfsd_acl_version[vers] = nfsd_acl_version[vers];
+ nfsd_acl_versions[vers] = nfsd_acl_version[vers];
#endif
+ break;
case NFSD_CLEAR:
nfsd_versions[vers] = NULL;
#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
if (vers < NFSD_ACL_NRVERS)
- nfsd_acl_version[vers] = NULL;
+ nfsd_acl_versions[vers] = NULL;
#endif
break;
case NFSD_TEST:
}
int
-nfssvc_encode_entry(struct readdir_cd *ccd, const char *name,
- int namlen, loff_t offset, ino_t ino, unsigned int d_type)
+nfssvc_encode_entry(void *ccdv, const char *name,
+ int namlen, loff_t offset, u64 ino, unsigned int d_type)
{
+ struct readdir_cd *ccd = ccdv;
struct nfsd_readdirres *cd = container_of(ccd, struct nfsd_readdirres, common);
__be32 *p = cd->buffer;
int buflen, slen;
#include <asm/uaccess.h>
#define NFSDDBG_FACILITY NFSDDBG_FILEOP
-#define NFSD_PARANOIA
/* We must ignore files (but only files) which might have mandatory
rqstp->rq_res.page_len = size;
} else if (page != pp[-1]) {
get_page(page);
- put_page(*pp);
+ if (*pp)
+ put_page(*pp);
*pp = page;
rqstp->rq_resused++;
rqstp->rq_res.page_len += size;
__be32 err;
int host_err;
__u32 v_mtime=0, v_atime=0;
- int v_mode=0;
err = nfserr_perm;
if (!flen)
goto out;
if (createmode == NFS3_CREATE_EXCLUSIVE) {
- /* while the verifier would fit in mtime+atime,
- * solaris7 gets confused (bugid 4218508) if these have
- * the high bit set, so we use the mode as well
+ /* solaris7 gets confused (bugid 4218508) if these have
+ * the high bit set, so just clear the high bits.
*/
v_mtime = verifier[0]&0x7fffffff;
v_atime = verifier[1]&0x7fffffff;
- v_mode = S_IFREG
- | ((verifier[0]&0x80000000) >> (32-7)) /* u+x */
- | ((verifier[1]&0x80000000) >> (32-9)) /* u+r */
- ;
}
if (dchild->d_inode) {
case NFS3_CREATE_EXCLUSIVE:
if ( dchild->d_inode->i_mtime.tv_sec == v_mtime
&& dchild->d_inode->i_atime.tv_sec == v_atime
- && dchild->d_inode->i_mode == v_mode
&& dchild->d_inode->i_size == 0 )
break;
/* fallthru */
}
if (createmode == NFS3_CREATE_EXCLUSIVE) {
- /* Cram the verifier into atime/mtime/mode */
+ /* Cram the verifier into atime/mtime */
iap->ia_valid = ATTR_MTIME|ATTR_ATIME
- | ATTR_MTIME_SET|ATTR_ATIME_SET
- | ATTR_MODE;
+ | ATTR_MTIME_SET|ATTR_ATIME_SET;
/* XXX someone who knows this better please fix it for nsec */
iap->ia_mtime.tv_sec = v_mtime;
iap->ia_atime.tv_sec = v_atime;
iap->ia_mtime.tv_nsec = 0;
iap->ia_atime.tv_nsec = 0;
- iap->ia_mode = v_mode;
}
/* Set file attributes.
- * Mode has already been set but we might need to reset it
- * for CREATE_EXCLUSIVE
* Irix appears to send along the gid when it tries to
* implement setgid directories via NFS. Clear out all that cruft.
*/
set_attr:
- if ((iap->ia_valid &= ~(ATTR_UID|ATTR_GID)) != 0) {
+ if ((iap->ia_valid &= ~(ATTR_UID|ATTR_GID|ATTR_MODE)) != 0) {
__be32 err2 = nfsd_setattr(rqstp, resfhp, iap, 0, (time_t)0);
if (err2)
err = err2;
*/
__be32
nfsd_readdir(struct svc_rqst *rqstp, struct svc_fh *fhp, loff_t *offsetp,
- struct readdir_cd *cdp, encode_dent_fn func)
+ struct readdir_cd *cdp, filldir_t func)
{
__be32 err;
int host_err;
do {
cdp->err = nfserr_eof; /* will be cleared on successful read */
- host_err = vfs_readdir(file, (filldir_t) func, cdp);
+ host_err = vfs_readdir(file, func, cdp);
} while (host_err >=0 && cdp->err == nfs_ok);
if (host_err)
err = nfserrno(host_err);
happen is unclear however so it is worth waiting until someone hits
the problem.
+2.1.28 - Fix a deadlock.
+
+ - Fix deadlock in fs/ntfs/inode.c::ntfs_put_inode(). Thanks to Sergey
+ Vlasov for the report and detailed analysis of the deadlock. The fix
+ involved getting rid of ntfs_put_inode() altogether and hence NTFS no
+ longer has a ->put_inode super operation.
+
2.1.27 - Various bug fixes and cleanups.
- Fix two compiler warnings on Alpha. Thanks to Andrew Morton for
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.27\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.28\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
/**
* dir.c - NTFS kernel directory operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
/* Get the offset into the index allocation attribute. */
ia_pos = (s64)fpos - vol->mft_record_size;
ia_mapping = vdir->i_mapping;
- bmp_vi = ndir->itype.index.bmp_ino;
- if (unlikely(!bmp_vi)) {
- ntfs_debug("Inode 0x%lx, regetting index bitmap.", vdir->i_ino);
- bmp_vi = ntfs_attr_iget(vdir, AT_BITMAP, I30, 4);
- if (IS_ERR(bmp_vi)) {
- ntfs_error(sb, "Failed to get bitmap attribute.");
- err = PTR_ERR(bmp_vi);
- goto err_out;
- }
- ndir->itype.index.bmp_ino = bmp_vi;
+ ntfs_debug("Inode 0x%lx, getting index bitmap.", vdir->i_ino);
+ bmp_vi = ntfs_attr_iget(vdir, AT_BITMAP, I30, 4);
+ if (IS_ERR(bmp_vi)) {
+ ntfs_error(sb, "Failed to get bitmap attribute.");
+ err = PTR_ERR(bmp_vi);
+ goto err_out;
}
bmp_mapping = bmp_vi->i_mapping;
/* Get the starting bitmap bit position and sanity check it. */
if (unlikely(bmp_pos >> 3 >= i_size_read(bmp_vi))) {
ntfs_error(sb, "Current index allocation position exceeds "
"index bitmap size.");
- goto err_out;
+ goto iput_err_out;
}
/* Get the starting bit position in the current bitmap page. */
cur_bmp_pos = bmp_pos & ((PAGE_CACHE_SIZE * 8) - 1);
ntfs_error(sb, "Reading index bitmap failed.");
err = PTR_ERR(bmp_page);
bmp_page = NULL;
- goto err_out;
+ goto iput_err_out;
}
bmp = (u8*)page_address(bmp_page);
/* Find next index block in use. */
/* @ia_page is already unlocked in this case. */
ntfs_unmap_page(ia_page);
ntfs_unmap_page(bmp_page);
+ iput(bmp_vi);
goto abort;
}
}
ntfs_unmap_page(ia_page);
}
ntfs_unmap_page(bmp_page);
+ iput(bmp_vi);
EOD:
/* We are finished, set fpos to EOD. */
fpos = i_size + vol->mft_record_size;
filp->f_pos = fpos;
return 0;
err_out:
- if (bmp_page)
+ if (bmp_page) {
ntfs_unmap_page(bmp_page);
+iput_err_out:
+ iput(bmp_vi);
+ }
if (ia_page) {
unlock_page(ia_page);
ntfs_unmap_page(ia_page);
static int ntfs_dir_fsync(struct file *filp, struct dentry *dentry,
int datasync)
{
- struct inode *vi = dentry->d_inode;
- ntfs_inode *ni = NTFS_I(vi);
+ struct inode *bmp_vi, *vi = dentry->d_inode;
int err, ret;
+ ntfs_attr na;
ntfs_debug("Entering for inode 0x%lx.", vi->i_ino);
BUG_ON(!S_ISDIR(vi->i_mode));
- if (NInoIndexAllocPresent(ni) && ni->itype.index.bmp_ino)
- write_inode_now(ni->itype.index.bmp_ino, !datasync);
+ /* If the bitmap attribute inode is in memory sync it, too. */
+ na.mft_no = vi->i_ino;
+ na.type = AT_BITMAP;
+ na.name = I30;
+ na.name_len = 4;
+ bmp_vi = ilookup5(vi->i_sb, vi->i_ino, (test_t)ntfs_test_inode, &na);
+ if (bmp_vi) {
+ write_inode_now(bmp_vi, !datasync);
+ iput(bmp_vi);
+ }
ret = ntfs_write_inode(vi, 1);
write_inode_now(vi, !datasync);
err = sync_blockdev(vi->i_sb->s_bdev);
/**
* inode.c - NTFS kernel inode handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2006 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* If initializing the normal file/directory inode, set @na->type to AT_UNUSED.
* In that case, @na->name and @na->name_len should be set to NULL and 0,
* respectively. Although that is not strictly necessary as
- * ntfs_read_inode_locked() will fill them in later.
+ * ntfs_read_locked_inode() will fill them in later.
*
* Return 0 on success and -errno on error.
*
struct inode *ntfs_iget(struct super_block *sb, unsigned long mft_no)
{
struct inode *vi;
- ntfs_attr na;
int err;
+ ntfs_attr na;
na.mft_no = mft_no;
na.type = AT_UNUSED;
ntfschar *name, u32 name_len)
{
struct inode *vi;
- ntfs_attr na;
int err;
+ ntfs_attr na;
/* Make sure no one calls ntfs_attr_iget() for indices. */
BUG_ON(type == AT_INDEX_ALLOCATION);
u32 name_len)
{
struct inode *vi;
- ntfs_attr na;
int err;
+ ntfs_attr na;
na.mft_no = base_vi->i_ino;
na.type = AT_INDEX_ALLOCATION;
ntfs_init_runlist(&ni->attr_list_rl);
lockdep_set_class(&ni->attr_list_rl.lock,
&attr_list_rl_lock_class);
- ni->itype.index.bmp_ino = NULL;
ni->itype.index.block_size = 0;
ni->itype.index.vcn_size = 0;
ni->itype.index.collation_rule = 0;
{
ntfs_volume *vol = NTFS_SB(vi->i_sb);
ntfs_inode *ni;
+ struct inode *bvi;
MFT_RECORD *m;
ATTR_RECORD *a;
STANDARD_INFORMATION *si;
*/
if (S_ISDIR(vi->i_mode)) {
loff_t bvi_size;
- struct inode *bvi;
ntfs_inode *bni;
INDEX_ROOT *ir;
u8 *ir_end, *index_end;
err = PTR_ERR(bvi);
goto unm_err_out;
}
- ni->itype.index.bmp_ino = bvi;
bni = NTFS_I(bvi);
if (NInoCompressed(bni) || NInoEncrypted(bni) ||
NInoSparse(bni)) {
ntfs_error(vi->i_sb, "$BITMAP attribute is compressed "
"and/or encrypted and/or sparse.");
- goto unm_err_out;
+ goto iput_unm_err_out;
}
/* Consistency check bitmap size vs. index allocation size. */
bvi_size = i_size_read(bvi);
ntfs_error(vi->i_sb, "Index bitmap too small (0x%llx) "
"for index allocation (0x%llx).",
bvi_size << 3, vi->i_size);
- goto unm_err_out;
+ goto iput_unm_err_out;
}
+ /* No longer need the bitmap attribute inode. */
+ iput(bvi);
skip_large_dir_stuff:
/* Setup the operations for this inode. */
vi->i_op = &ntfs_dir_inode_ops;
vi->i_blocks = ni->allocated_size >> 9;
ntfs_debug("Done.");
return 0;
-
+iput_unm_err_out:
+ iput(bvi);
unm_err_out:
if (!err)
err = -EIO;
vi->i_size);
goto iput_unm_err_out;
}
- ni->itype.index.bmp_ino = bvi;
+ iput(bvi);
skip_large_index_stuff:
/* Setup the operations for this index inode. */
vi->i_op = NULL;
ntfs_debug("Done.");
return 0;
-
iput_unm_err_out:
iput(bvi);
unm_err_out:
return -1;
}
-/**
- * ntfs_put_inode - handler for when the inode reference count is decremented
- * @vi: vfs inode
- *
- * The VFS calls ntfs_put_inode() every time the inode reference count (i_count)
- * is about to be decremented (but before the decrement itself.
- *
- * If the inode @vi is a directory with two references, one of which is being
- * dropped, we need to put the attribute inode for the directory index bitmap,
- * if it is present, otherwise the directory inode would remain pinned for
- * ever.
- */
-void ntfs_put_inode(struct inode *vi)
-{
- if (S_ISDIR(vi->i_mode) && atomic_read(&vi->i_count) == 2) {
- ntfs_inode *ni = NTFS_I(vi);
- if (NInoIndexAllocPresent(ni)) {
- struct inode *bvi = NULL;
- mutex_lock(&vi->i_mutex);
- if (atomic_read(&vi->i_count) == 2) {
- bvi = ni->itype.index.bmp_ino;
- if (bvi)
- ni->itype.index.bmp_ino = NULL;
- }
- mutex_unlock(&vi->i_mutex);
- if (bvi)
- iput(bvi);
- }
- }
-}
-
static void __ntfs_clear_inode(ntfs_inode *ni)
{
/* Free all alocated memory. */
{
ntfs_inode *ni = NTFS_I(vi);
- /*
- * If the inode @vi is an index inode we need to put the attribute
- * inode for the index bitmap, if it is present, otherwise the index
- * inode would disappear and the attribute inode for the index bitmap
- * would no longer be referenced from anywhere and thus it would remain
- * pinned for ever.
- */
- if (NInoAttr(ni) && (ni->type == AT_INDEX_ALLOCATION) &&
- NInoIndexAllocPresent(ni) && ni->itype.index.bmp_ino) {
- iput(ni->itype.index.bmp_ino);
- ni->itype.index.bmp_ino = NULL;
- }
#ifdef NTFS_RW
if (NInoDirty(ni)) {
bool was_bad = (is_bad_inode(vi));
* inode.h - Defines for inode structures NTFS Linux kernel driver. Part of
* the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
runlist attr_list_rl; /* Run list for the attribute list value. */
union {
struct { /* It is a directory, $MFT, or an index inode. */
- struct inode *bmp_ino; /* Attribute inode for the
- index $BITMAP. */
u32 block_size; /* Size of an index block. */
u32 vcn_size; /* Size of a vcn in this
index. */
extern int ntfs_read_inode_mount(struct inode *vi);
-extern void ntfs_put_inode(struct inode *vi);
-
extern int ntfs_show_options(struct seq_file *sf, struct vfsmount *mnt);
#ifdef NTFS_RW
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2006 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
static struct super_operations ntfs_sops = {
.alloc_inode = ntfs_alloc_big_inode, /* VFS: Allocate new inode. */
.destroy_inode = ntfs_destroy_big_inode, /* VFS: Deallocate inode. */
- .put_inode = ntfs_put_inode, /* VFS: Called just before
- the inode reference count
- is decreased. */
#ifdef NTFS_RW
//.dirty_inode = NULL, /* VFS: Called from
// __mark_inode_dirty(). */
}
MODULE_AUTHOR("Anton Altaparmakov <aia21@cantab.net>");
-MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2006 Anton Altaparmakov");
+MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2007 Anton Altaparmakov");
MODULE_VERSION(NTFS_VERSION);
MODULE_LICENSE("GPL");
#ifdef DEBUG
struct buffer_head *bh_result, int create)
{
int ret;
- u64 vbo_max; /* file offset, max_blocks from iblock */
- u64 p_blkno;
+ u64 p_blkno, inode_blocks;
int contig_blocks;
unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
* nicely aligned and of the right size, so there's no need
* for us to check any of that. */
- vbo_max = ((u64)iblock + max_blocks) << blocksize_bits;
-
spin_lock(&OCFS2_I(inode)->ip_lock);
- if ((iblock + max_blocks) >
- ocfs2_clusters_to_blocks(inode->i_sb,
- OCFS2_I(inode)->ip_clusters)) {
+ inode_blocks = ocfs2_clusters_to_blocks(inode->i_sb,
+ OCFS2_I(inode)->ip_clusters);
+
+ /*
+ * For a read which begins past the end of file, we return a hole.
+ */
+ if (!create && (iblock >= inode_blocks)) {
+ spin_unlock(&OCFS2_I(inode)->ip_lock);
+ ret = 0;
+ goto bail;
+ }
+
+ /*
+ * Any write past EOF is not allowed because we'd be extending.
+ */
+ if (create && (iblock + max_blocks) > inode_blocks) {
spin_unlock(&OCFS2_I(inode)->ip_lock);
ret = -EIO;
goto bail;
return ret;
}
+static ssize_t o2hb_region_pid_read(struct o2hb_region *reg,
+ char *page)
+{
+ if (!reg->hr_task)
+ return 0;
+
+ return sprintf(page, "%u\n", reg->hr_task->pid);
+}
+
struct o2hb_region_attribute {
struct configfs_attribute attr;
ssize_t (*show)(struct o2hb_region *, char *);
.store = o2hb_region_dev_write,
};
+static struct o2hb_region_attribute o2hb_region_attr_pid = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "pid",
+ .ca_mode = S_IRUGO | S_IRUSR },
+ .show = o2hb_region_pid_read,
+};
+
static struct configfs_attribute *o2hb_region_attrs[] = {
&o2hb_region_attr_block_bytes.attr,
&o2hb_region_attr_start_block.attr,
&o2hb_region_attr_blocks.attr,
&o2hb_region_attr_dev.attr,
+ &o2hb_region_attr_pid.attr,
NULL,
};
inode = ocfs2_lock_res_inode(lockres);
mapping = inode->i_mapping;
+ /*
+ * We need this before the filemap_fdatawrite() so that it can
+ * transfer the dirty bit from the PTE to the
+ * page. Unfortunately this means that even for EX->PR
+ * downconverts, we'll lose our mappings and have to build
+ * them up again.
+ */
+ unmap_mapping_range(mapping, 0, 0, 0);
+
if (filemap_fdatawrite(mapping)) {
mlog(ML_ERROR, "Could not sync inode %llu for downconvert!",
(unsigned long long)OCFS2_I(inode)->ip_blkno);
sync_mapping_buffers(mapping);
if (blocking == LKM_EXMODE) {
truncate_inode_pages(mapping, 0);
- unmap_mapping_range(mapping, 0, 0, 0);
} else {
/* We only need to wait on the I/O if we're not also
* truncating pages because truncate_inode_pages waits
inode = ocfs2_iget(OCFS2_SB(sb), handle->ih_blkno, 0);
- if (IS_ERR(inode)) {
- mlog_errno(PTR_ERR(inode));
+ if (IS_ERR(inode))
return (void *)inode;
- }
if (handle->ih_generation != inode->i_generation) {
iput(inode);
- mlog_errno(-ESTALE);
return ERR_PTR(-ESTALE);
}
((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
return 0;
+ /*
+ * We can be called with no vfsmnt structure - NFSD will
+ * sometimes do this.
+ *
+ * Note that our action here is different than touch_atime() -
+ * if we can't tell whether this is a noatime mount, then we
+ * don't know whether to trust the value of s_atime_quantum.
+ */
+ if (vfsmnt == NULL)
+ return 0;
+
if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
return 0;
}
ret = generic_permission(inode, mask, NULL);
- if (ret)
- mlog_errno(ret);
ocfs2_meta_unlock(inode, 0);
out:
if (is_bad_inode(inode)) {
iput(inode);
inode = ERR_PTR(-ESTALE);
- mlog_errno(PTR_ERR(inode));
goto bail;
}
mlog(0, "returning inode with number %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno);
mlog_exit_ptr(inode);
- } else
- mlog_errno(PTR_ERR(inode));
+ }
return inode;
}
* today. change if needed. */
if (!OCFS2_IS_VALID_DINODE(fe) ||
!(fe->i_flags & cpu_to_le32(OCFS2_VALID_FL))) {
- mlog(ML_ERROR, "Invalid dinode: i_ino=%lu, i_blkno=%llu, "
+ mlog(0, "Invalid dinode: i_ino=%lu, i_blkno=%llu, "
"signature = %.*s, flags = 0x%x\n",
inode->i_ino,
(unsigned long long)le64_to_cpu(fe->i_blkno), 7,
S_ISBLK(le16_to_cpu(fe->i_mode)))
inode->i_rdev = huge_decode_dev(le64_to_cpu(fe->id1.dev1.i_rdev));
- if (ocfs2_populate_inode(inode, fe, 0) < 0) {
- mlog(ML_ERROR, "populate failed! i_blkno=%llu, i_ino=%lu\n",
- (unsigned long long)fe->i_blkno, inode->i_ino);
+ if (ocfs2_populate_inode(inode, fe, 0) < 0)
goto bail;
- }
BUG_ON(args->fi_blkno != le64_to_cpu(fe->i_blkno));
goto leave;
}
- if (S_ISDIR(inode->i_mode)) {
+ dir->i_ctime = dir->i_mtime = CURRENT_TIME;
+ if (S_ISDIR(inode->i_mode))
drop_nlink(dir);
- status = ocfs2_mark_inode_dirty(handle, dir,
- parent_node_bh);
- if (status < 0) {
- mlog_errno(status);
+
+ status = ocfs2_mark_inode_dirty(handle, dir, parent_node_bh);
+ if (status < 0) {
+ mlog_errno(status);
+ if (S_ISDIR(inode->i_mode))
inc_nlink(dir);
- }
}
leave:
char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
struct buffer_head *orphan_entry_bh = NULL;
struct buffer_head *newfe_bh = NULL;
+ struct buffer_head *old_inode_bh = NULL;
struct buffer_head *insert_entry_bh = NULL;
struct ocfs2_super *osb = NULL;
u64 newfe_blkno;
struct buffer_head *new_de_bh = NULL, *old_de_bh = NULL; // bhs for above
struct buffer_head *old_inode_de_bh = NULL; // if old_dentry is a dir,
// this is the 1st dirent bh
- nlink_t old_dir_nlink = old_dir->i_nlink, new_dir_nlink = new_dir->i_nlink;
+ nlink_t old_dir_nlink = old_dir->i_nlink;
/* At some point it might be nice to break this function up a
* bit. */
}
/*
- * Though we don't require an inode meta data update if
- * old_inode is not a directory, we lock anyway here to ensure
- * the vote thread on other nodes won't have to concurrently
- * downconvert the inode and the dentry locks.
+ * Aside from allowing a meta data update, the locking here
+ * also ensures that the vote thread on other nodes won't have
+ * to concurrently downconvert the inode and the dentry locks.
*/
- status = ocfs2_meta_lock(old_inode, NULL, 1);
+ status = ocfs2_meta_lock(old_inode, &old_inode_bh, 1);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
old_inode->i_ctime = CURRENT_TIME;
mark_inode_dirty(old_inode);
+ ocfs2_mark_inode_dirty(handle, old_inode, old_inode_bh);
/* now that the name has been added to new_dir, remove the old name */
status = ocfs2_delete_entry(handle, old_dir, old_de, old_de_bh);
}
}
mark_inode_dirty(old_dir);
- if (new_inode)
+ ocfs2_mark_inode_dirty(handle, old_dir, old_dir_bh);
+ if (new_inode) {
mark_inode_dirty(new_inode);
+ ocfs2_mark_inode_dirty(handle, new_inode, newfe_bh);
+ }
- if (old_dir != new_dir)
- if (new_dir_nlink != new_dir->i_nlink) {
- if (!new_dir_bh) {
- mlog(ML_ERROR, "need to change nlink for new "
- "dir %llu from %d to %d but bh is NULL\n",
- (unsigned long long)OCFS2_I(new_dir)->ip_blkno,
- (int)new_dir_nlink, new_dir->i_nlink);
- } else {
- struct ocfs2_dinode *fe;
- status = ocfs2_journal_access(handle,
- new_dir,
- new_dir_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- fe = (struct ocfs2_dinode *) new_dir_bh->b_data;
- fe->i_links_count = cpu_to_le16(new_dir->i_nlink);
- status = ocfs2_journal_dirty(handle, new_dir_bh);
- }
- }
+ if (old_dir != new_dir) {
+ /* Keep the same times on both directories.*/
+ new_dir->i_ctime = new_dir->i_mtime = old_dir->i_ctime;
+
+ /*
+ * This will also pick up the i_nlink change from the
+ * block above.
+ */
+ ocfs2_mark_inode_dirty(handle, new_dir, new_dir_bh);
+ }
if (old_dir_nlink != old_dir->i_nlink) {
if (!old_dir_bh) {
iput(new_inode);
if (newfe_bh)
brelse(newfe_bh);
+ if (old_inode_bh)
+ brelse(old_inode_bh);
if (old_dir_bh)
brelse(old_dir_bh);
if (new_dir_bh)
(le16_to_cpu(de->rec_len) >= rec_len)) ||
(le16_to_cpu(de->rec_len) >=
(OCFS2_DIR_REC_LEN(de->name_len) + rec_len))) {
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
+ retval = ocfs2_mark_inode_dirty(handle, dir, parent_fe_bh);
+ if (retval < 0) {
+ mlog_errno(retval);
+ goto bail;
+ }
+
status = ocfs2_journal_access(handle, dir, insert_bh,
OCFS2_JOURNAL_ACCESS_WRITE);
/* By now the buffer is marked for journaling */
de->name_len = namelen;
memcpy(de->name, name, namelen);
- dir->i_mtime = dir->i_ctime = CURRENT_TIME;
dir->i_version++;
status = ocfs2_journal_dirty(handle, insert_bh);
retval = 0;
#define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask) \
OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
-#define OCFS2_FEATURE_COMPAT_SUPP 0
+#define OCFS2_FEATURE_COMPAT_SUPP OCFS2_FEATURE_COMPAT_BACKUP_SB
#define OCFS2_FEATURE_INCOMPAT_SUPP OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT
#define OCFS2_FEATURE_RO_COMPAT_SUPP 0
/* Support for sparse allocation in b-trees */
#define OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC 0x0010
+/*
+ * backup superblock flag is used to indicate that this volume
+ * has backup superblocks.
+ */
+#define OCFS2_FEATURE_COMPAT_BACKUP_SB 0x0001
+
+/* The byte offset of the first backup block will be 1G.
+ * The following will be 4G, 16G, 64G, 256G and 1T.
+ */
+#define OCFS2_BACKUP_SB_START 1 << 30
+
+/* the max backup superblock nums */
+#define OCFS2_MAX_BACKUP_SUPERBLOCKS 6
+
/*
* Flags on ocfs2_dinode.i_flags
*/
return size / sizeof(struct ocfs2_truncate_rec);
}
+
+static inline u64 ocfs2_backup_super_blkno(struct super_block *sb, int index)
+{
+ u64 offset = OCFS2_BACKUP_SB_START;
+
+ if (index >= 0 && index < OCFS2_MAX_BACKUP_SUPERBLOCKS) {
+ offset <<= (2 * index);
+ offset >>= sb->s_blocksize_bits;
+ return offset;
+ }
+
+ return 0;
+
+}
#else
static inline int ocfs2_fast_symlink_chars(int blocksize)
{
return size / sizeof(struct ocfs2_truncate_rec);
}
+
+static inline uint64_t ocfs2_backup_super_blkno(int blocksize, int index)
+{
+ uint64_t offset = OCFS2_BACKUP_SB_START;
+
+ if (index >= 0 && index < OCFS2_MAX_BACKUP_SUPERBLOCKS) {
+ offset <<= (2 * index);
+ offset /= blocksize;
+ return offset;
+ }
+
+ return 0;
+}
#endif /* __KERNEL__ */
}
status = vfs_follow_link(nd, link);
- if (status && status != -ENOENT)
- mlog_errno(status);
+
bail:
if (page) {
kunmap(page);
void free_write_pipe(struct file *f)
{
- mntput(f->f_path.mnt);
+ free_pipe_info(f->f_dentry->d_inode);
dput(f->f_path.dentry);
+ mntput(f->f_path.mnt);
put_filp(f);
}
err_fdr:
put_unused_fd(fdr);
err_read_pipe:
+ dput(fr->f_dentry);
+ mntput(fr->f_vfsmnt);
put_filp(fr);
err_write_pipe:
free_write_pipe(fw);
if (task) {
task_lock(task);
- ns = task->nsproxy->mnt_ns;
- if (ns)
- get_mnt_ns(ns);
+ if (task->nsproxy) {
+ ns = task->nsproxy->mnt_ns;
+ if (ns)
+ get_mnt_ns(ns);
+ }
task_unlock(task);
put_task_struct(task);
}
#include <linux/vmalloc.h>
#include <linux/crash_dump.h>
#include <linux/pid_namespace.h>
-#include <linux/compile.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
{
int len;
- /* FIXED STRING! Don't touch! */
- len = snprintf(page, PAGE_SIZE,
- "%s version %s"
- " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")"
- " (" LINUX_COMPILER ")"
- " %s\n",
+ len = snprintf(page, PAGE_SIZE, linux_proc_banner,
utsname()->sysname,
utsname()->release,
utsname()->version);
*/
#include <linux/fs.h>
+#include <linux/mm.h>
const struct address_space_operations ramfs_aops = {
.readpage = simple_readpage,
.prepare_write = simple_prepare_write,
- .commit_write = simple_commit_write
+ .commit_write = simple_commit_write,
+ .set_page_dirty = __set_page_dirty_nobuffers,
};
const struct file_operations ramfs_file_operations = {
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include <linux/init.h>
const struct address_space_operations ramfs_aops = {
.readpage = simple_readpage,
.prepare_write = simple_prepare_write,
- .commit_write = simple_commit_write
+ .commit_write = simple_commit_write,
+ .set_page_dirty = __set_page_dirty_nobuffers,
};
const struct file_operations ramfs_file_operations = {
}
mutex_lock(&inode->i_mutex);
+
+ mutex_lock(&(REISERFS_I(inode)->i_mmap));
+ if (REISERFS_I(inode)->i_flags & i_ever_mapped)
+ REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
+
reiserfs_write_lock(inode->i_sb);
/* freeing preallocation only involves relogging blocks that
* are already in the current transaction. preallocation gets
err = reiserfs_truncate_file(inode, 0);
}
out:
+ mutex_unlock(&(REISERFS_I(inode)->i_mmap));
mutex_unlock(&inode->i_mutex);
reiserfs_write_unlock(inode->i_sb);
return err;
}
+static int reiserfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct inode *inode;
+
+ inode = file->f_path.dentry->d_inode;
+ mutex_lock(&(REISERFS_I(inode)->i_mmap));
+ REISERFS_I(inode)->i_flags |= i_ever_mapped;
+ mutex_unlock(&(REISERFS_I(inode)->i_mmap));
+
+ return generic_file_mmap(file, vma);
+}
+
static void reiserfs_vfs_truncate_file(struct inode *inode)
{
reiserfs_truncate_file(inode, 1);
#ifdef CONFIG_COMPAT
.compat_ioctl = reiserfs_compat_ioctl,
#endif
- .mmap = generic_file_mmap,
+ .mmap = reiserfs_file_mmap,
.open = generic_file_open,
.release = reiserfs_file_release,
.fsync = reiserfs_sync_file,
REISERFS_I(inode)->i_prealloc_count = 0;
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
+ mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_acl_access(inode);
reiserfs_init_acl_default(inode);
reiserfs_init_xattr_rwsem(inode);
REISERFS_I(inode)->i_attrs =
REISERFS_I(dir)->i_attrs & REISERFS_INHERIT_MASK;
sd_attrs_to_i_attrs(REISERFS_I(inode)->i_attrs, inode);
+ mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_acl_access(inode);
reiserfs_init_acl_default(inode);
reiserfs_init_xattr_rwsem(inode);
bh = next;
} while (bh != head);
if (PAGE_SIZE == bh->b_size) {
- clear_page_dirty(page);
+ cancel_dirty_page(page, PAGE_CACHE_SIZE);
}
}
}
dest->i_ctime = src->i_ctime;
dest->i_blkbits = src->i_blkbits;
dest->i_flags = src->i_flags;
-
- fsstack_copy_inode_size(dest, src);
}
EXPORT_SYMBOL_GPL(fsstack_copy_attr_all);
* will protect the lockfs code from trying to start a snapshot
* while we are mounting
*/
- mutex_lock(&bdev->bd_mount_mutex);
+ down(&bdev->bd_mount_sem);
s = sget(fs_type, test_bdev_super, set_bdev_super, bdev);
- mutex_unlock(&bdev->bd_mount_mutex);
+ up(&bdev->bd_mount_sem);
if (IS_ERR(s))
goto error_s;
.fs_flags = FS_REQUIRES_DEV,
};
-extern int sysv_init_icache(void) __init;
-extern void sysv_destroy_icache(void);
-
static int __init init_sysv_fs(void)
{
int error;
extern int sysv_sync_file(struct file *, struct dentry *, int);
extern void sysv_set_inode(struct inode *, dev_t);
extern int sysv_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+extern int sysv_init_icache(void);
+extern void sysv_destroy_icache(void);
+
/* dir.c */
extern struct sysv_dir_entry *sysv_find_entry(struct dentry *, struct page **);
* We can come here from ufs_writepage or ufs_prepare_write,
* locked_page is argument of these functions, so we already lock it.
*/
-static void ufs_change_blocknr(struct inode *inode, unsigned int baseblk,
+static void ufs_change_blocknr(struct inode *inode, unsigned int beg,
unsigned int count, unsigned int oldb,
unsigned int newb, struct page *locked_page)
{
- unsigned int blk_per_page = 1 << (PAGE_CACHE_SHIFT - inode->i_blkbits);
- struct address_space *mapping = inode->i_mapping;
- pgoff_t index, cur_index = locked_page->index;
- unsigned int i, j;
+ const unsigned mask = (1 << (PAGE_CACHE_SHIFT - inode->i_blkbits)) - 1;
+ struct address_space * const mapping = inode->i_mapping;
+ pgoff_t index, cur_index;
+ unsigned end, pos, j;
struct page *page;
struct buffer_head *head, *bh;
UFSD("ENTER, ino %lu, count %u, oldb %u, newb %u\n",
inode->i_ino, count, oldb, newb);
+ BUG_ON(!locked_page);
BUG_ON(!PageLocked(locked_page));
- for (i = 0; i < count; i += blk_per_page) {
- index = (baseblk+i) >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ cur_index = locked_page->index;
+
+ for (end = count + beg; beg < end; beg = (beg | mask) + 1) {
+ index = beg >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
if (likely(cur_index != index)) {
page = ufs_get_locked_page(mapping, index);
} else
page = locked_page;
- j = i;
head = page_buffers(page);
bh = head;
+ pos = beg & mask;
+ for (j = 0; j < pos; ++j)
+ bh = bh->b_this_page;
+ j = 0;
do {
- if (likely(bh->b_blocknr == j + oldb && j < count)) {
- unmap_underlying_metadata(bh->b_bdev,
- bh->b_blocknr);
- bh->b_blocknr = newb + j++;
- mark_buffer_dirty(bh);
+ if (buffer_mapped(bh)) {
+ pos = bh->b_blocknr - oldb;
+ if (pos < count) {
+ UFSD(" change from %llu to %llu\n",
+ (unsigned long long)pos + oldb,
+ (unsigned long long)pos + newb);
+ bh->b_blocknr = newb + pos;
+ unmap_underlying_metadata(bh->b_bdev,
+ bh->b_blocknr);
+ mark_buffer_dirty(bh);
+ ++j;
+ }
}
bh = bh->b_this_page;
} while (bh != head);
- set_page_dirty(page);
+ if (j)
+ set_page_dirty(page);
if (likely(cur_index != index))
ufs_put_locked_page(page);
UFSD("EXIT\n");
}
+static void ufs_clear_frags(struct inode *inode, sector_t beg, unsigned int n,
+ int sync)
+{
+ struct buffer_head *bh;
+ sector_t end = beg + n;
+
+ for (; beg < end; ++beg) {
+ bh = sb_getblk(inode->i_sb, beg);
+ lock_buffer(bh);
+ memset(bh->b_data, 0, inode->i_sb->s_blocksize);
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ unlock_buffer(bh);
+ if (IS_SYNC(inode) || sync)
+ sync_dirty_buffer(bh);
+ brelse(bh);
+ }
+}
+
unsigned ufs_new_fragments(struct inode * inode, __fs32 * p, unsigned fragment,
unsigned goal, unsigned count, int * err, struct page *locked_page)
{
*p = cpu_to_fs32(sb, result);
*err = 0;
UFS_I(inode)->i_lastfrag = max_t(u32, UFS_I(inode)->i_lastfrag, fragment + count);
+ ufs_clear_frags(inode, result + oldcount, newcount - oldcount,
+ locked_page != NULL);
}
unlock_super(sb);
UFSD("EXIT, result %u\n", result);
if (result) {
*err = 0;
UFS_I(inode)->i_lastfrag = max_t(u32, UFS_I(inode)->i_lastfrag, fragment + count);
+ ufs_clear_frags(inode, result + oldcount, newcount - oldcount,
+ locked_page != NULL);
unlock_super(sb);
UFSD("EXIT, result %u\n", result);
return result;
}
result = ufs_alloc_fragments (inode, cgno, goal, request, err);
if (result) {
+ ufs_clear_frags(inode, result + oldcount, newcount - oldcount,
+ locked_page != NULL);
ufs_change_blocknr(inode, fragment - oldcount, oldcount, tmp,
result, locked_page);
return ret;
}
-static void ufs_clear_frag(struct inode *inode, struct buffer_head *bh)
-{
- lock_buffer(bh);
- memset(bh->b_data, 0, inode->i_sb->s_blocksize);
- set_buffer_uptodate(bh);
- mark_buffer_dirty(bh);
- unlock_buffer(bh);
- if (IS_SYNC(inode))
- sync_dirty_buffer(bh);
-}
-
-static struct buffer_head *
-ufs_clear_frags(struct inode *inode, sector_t beg,
- unsigned int n, sector_t want)
-{
- struct buffer_head *res = NULL, *bh;
- sector_t end = beg + n;
-
- for (; beg < end; ++beg) {
- bh = sb_getblk(inode->i_sb, beg);
- ufs_clear_frag(inode, bh);
- if (want != beg)
- brelse(bh);
- else
- res = bh;
- }
- BUG_ON(!res);
- return res;
-}
-
/**
* ufs_inode_getfrag() - allocate new fragment(s)
* @inode - pointer to inode
goal = tmp + uspi->s_fpb;
tmp = ufs_new_fragments (inode, p, fragment - blockoff,
goal, required + blockoff,
- err, locked_page);
+ err,
+ phys != NULL ? locked_page : NULL);
}
/*
* We will extend last allocated block
else if (lastblock == block) {
tmp = ufs_new_fragments(inode, p, fragment - (blockoff - lastblockoff),
fs32_to_cpu(sb, *p), required + (blockoff - lastblockoff),
- err, locked_page);
+ err, phys != NULL ? locked_page : NULL);
} else /* (lastblock > block) */ {
/*
* We will allocate new block before last allocated block
goal = tmp + uspi->s_fpb;
}
tmp = ufs_new_fragments(inode, p, fragment - blockoff,
- goal, uspi->s_fpb, err, locked_page);
+ goal, uspi->s_fpb, err,
+ phys != NULL ? locked_page : NULL);
}
if (!tmp) {
if ((!blockoff && *p) ||
}
if (!phys) {
- result = ufs_clear_frags(inode, tmp, required, tmp + blockoff);
+ result = sb_getblk(sb, tmp + blockoff);
} else {
*phys = tmp + blockoff;
result = NULL;
if (!phys) {
- result = ufs_clear_frags(inode, tmp, uspi->s_fpb,
- tmp + blockoff);
+ result = sb_getblk(sb, tmp + blockoff);
} else {
*phys = tmp + blockoff;
*new = 1;
* it much more readable:
*/
#define GET_INODE_DATABLOCK(x) \
- ufs_inode_getfrag(inode, x, fragment, 1, &err, &phys, &new, bh_result->b_page)
+ ufs_inode_getfrag(inode, x, fragment, 1, &err, &phys, &new,\
+ bh_result->b_page)
#define GET_INODE_PTR(x) \
- ufs_inode_getfrag(inode, x, fragment, uspi->s_fpb, &err, NULL, NULL, bh_result->b_page)
+ ufs_inode_getfrag(inode, x, fragment, uspi->s_fpb, &err, NULL, NULL,\
+ bh_result->b_page)
#define GET_INDIRECT_DATABLOCK(x) \
ufs_inode_getblock(inode, bh, x, fragment, \
- &err, &phys, &new, bh_result->b_page);
+ &err, &phys, &new, bh_result->b_page)
#define GET_INDIRECT_PTR(x) \
ufs_inode_getblock(inode, bh, x, fragment, \
- &err, NULL, NULL, bh_result->b_page);
+ &err, NULL, NULL, NULL)
if (ptr < UFS_NDIR_FRAGMENT) {
bh = GET_INODE_DATABLOCK(ptr);
tmp = fs32_to_cpu(sb, *p);
if (!tmp )
ufs_panic (sb, "ufs_trunc_direct", "internal error");
+ frag2 -= frag1;
frag1 = ufs_fragnum (frag1);
- frag2 = ufs_fragnum (frag2);
- ufs_free_fragments (inode, tmp + frag1, frag2 - frag1);
+ ufs_free_fragments(inode, tmp + frag1, frag2);
mark_inode_dirty(inode);
frag_to_free = tmp + frag1;
{
ASSERT(PageLocked(page));
ASSERT(!PageWriteback(page));
- set_page_writeback(page);
if (clear_dirty)
- clear_page_dirty(page);
+ clear_page_dirty_for_io(page);
+ set_page_writeback(page);
unlock_page(page);
if (!buffers) {
end_page_writeback(page);
/* Maximum object reference count (detects object deletion issues) */
-#define ACPI_MAX_REFERENCE_COUNT 0x800
+#define ACPI_MAX_REFERENCE_COUNT 0x1000
/* Size of cached memory mapping for system memory operation region */
acpi_status acpi_load_tables(void);
-#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
-acpi_status acpi_unload_table(acpi_table_type table_type);
+acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id);
+#ifdef ACPI_FUTURE_USAGE
+acpi_status acpi_unload_table(acpi_table_type table_type);
acpi_status
acpi_get_table_header(acpi_table_type table_type,
u32 instance, struct acpi_table_header *out_table_header);
acpi_status acpi_get_type(acpi_handle object, acpi_object_type * out_type);
+acpi_status acpi_get_id(acpi_handle object, acpi_owner_id * out_type);
+
acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle);
/*
#define dma_map_single(dev, va, size, dir) virt_to_phys(va)
#define dma_map_page(dev, page, off, size, dir) (page_to_pa(page) + off)
-#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
-#define dma_unmap_page(dev, addr, size, dir) do { } while (0)
-#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+#define dma_unmap_single(dev, addr, size, dir) ((void)0)
+#define dma_unmap_page(dev, addr, size, dir) ((void)0)
+#define dma_unmap_sg(dev, sg, nents, dir) ((void)0)
#define dma_mapping_error(addr) (0)
int dma_set_mask(struct device *dev, u64 mask);
-#define dma_sync_single_for_cpu(dev, addr, size, dir) do { } while (0)
-#define dma_sync_single_for_device(dev, addr, size, dir) do { } while (0)
-#define dma_sync_single_range(dev, addr, off, size, dir) do { } while (0)
-#define dma_sync_sg_for_cpu(dev, sg, nents, dir) do { } while (0)
-#define dma_sync_sg_for_device(dev, sg, nents, dir) do { } while (0)
-#define dma_cache_sync(dev, va, size, dir) do { } while (0)
+#define dma_sync_single_for_cpu(dev, addr, size, dir) ((void)0)
+#define dma_sync_single_for_device(dev, addr, size, dir) ((void)0)
+#define dma_sync_single_range(dev, addr, off, size, dir) ((void)0)
+#define dma_sync_sg_for_cpu(dev, sg, nents, dir) ((void)0)
+#define dma_sync_sg_for_device(dev, sg, nents, dir) ((void)0)
+#define dma_cache_sync(dev, va, size, dir) ((void)0)
+#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir) ((void)0)
+#define dma_sync_single_range_for_device(dev, addr, offset, size, dir) ((void)0)
#define dma_get_cache_alignment() L1_CACHE_BYTES
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
#define AT91_ECC_H
#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
-#define AT91_ECC_RST (1 << 0) /* Reset parity */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
#define AT91_ECC_PAGESIZE_2112 (2)
#define AT91_ECC_PAGESIZE_4224 (3)
-#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
+#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
-#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
+#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
+#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
#endif
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
#define AT91_PMC_PRES_4 (2 << 2)
#define AT91_PMC_PRES_8 (3 << 2)
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
-#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
-#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
-#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
-#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
-#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
-#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
+#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
-#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
+#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
-#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
+#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
+#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_SDRAMC_NC_9 (1 << 0)
#define AT91_SDRAMC_NC_10 (2 << 0)
#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
#define AT91_SDRAMC_NR_11 (0 << 2)
#define AT91_SDRAMC_NR_12 (1 << 2)
#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
#define AT91_SDRAMC_CAS_1 (1 << 5)
#define AT91_SDRAMC_CAS_2 (2 << 5)
#define AT91_SDRAMC_CAS_3 (3 << 5)
#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 5)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 5)
-#define AT91_SMC_EXNWMODE_READY (3 << 5)
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
#define AT91_SMC_BAT_SELECT (0 << 8)
#define AT91_SMC_BAT_WRITE (1 << 8)
#define IRQ_EP93XX_DMAM2P9 16
#define IRQ_EP93XX_DMAM2M0 17
#define IRQ_EP93XX_DMAM2M1 18
-#define IRQ_EP93XX_GPIO0MUX 20
-#define IRQ_EP93XX_GPIO1MUX 21
-#define IRQ_EP93XX_GPIO2MUX 22
+#define IRQ_EP93XX_GPIO0MUX 19
+#define IRQ_EP93XX_GPIO1MUX 20
+#define IRQ_EP93XX_GPIO2MUX 21
#define IRQ_EP93XX_GPIO3MUX 22
#define IRQ_EP93XX_UART1RX 23
#define IRQ_EP93XX_UART1TX 24
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) (a)
+#define __io(a) __iop13xx_io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
+extern void __iomem * __iop13xx_io(unsigned long io_addr);
extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
unsigned long flags);
#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH)
#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1)
-/* These are the values used in the Machine description */
-#define PHYS_IO 0xfeffff00
-#define IO_PG_OFFSET 0xffffff00
-#define BOOT_PARAM_OFFSET 0x00000100
+
#endif /* _IQ81340_H_ */
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
-#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg))
+#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
#include <asm/hardware/iop3xx.h>
data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
__phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-/*
- * Coherency support. Only supported on A2 CPUs or on A1
- * systems that have the cache coherency workaround.
- */
-static inline int __ixp23xx_arch_is_coherent(void)
-{
- extern unsigned int processor_id;
-
- if (((processor_id & 15) >= 4) || machine_is_roadrunner())
- return 1;
-
- return 0;
-}
-
-#define arch_is_coherent() __ixp23xx_arch_is_coherent()
+#define arch_is_coherent() 1
#endif
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) ((x) - 1) /* Time slots per frame [1..8] */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
#define SSCR0_ADC (1 << 30) /* Audio clock select */
#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
#endif
#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
/* linux/include/asm-arm/arch-s3c2410/audio.h
*
- * (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* BAST - CPLD control constants
*
/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - IRQ Number definitions
*
/* linux/include/asm-arm/arch-s3c2410/bast-map.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - Memory map definitions
*
/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
*
- * (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@simtec.co.uk>
*
#define __ASM_ARCH_DMA_H __FILE__
#include <linux/sysdev.h>
-#include "hardware.h"
+#include <asm/hardware.h>
/*
* This is the maximum DMA address(physical address) that can be DMAd to.
#define INTOFFSET (0x14)
#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
+#include <asm/irq.h>
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
#ifndef __ASSEMBLY__
-#define H1940_LATCH ((void __iomem *)0xF8000000)
+#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#else
#define H1940_LATCH 0xF8000000
#endif
/* linux/include/asm-arm/arch-s3c2410/hardware.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
+#ifndef __ASM_HARDWARE_H
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
#ifndef __ASSEMBLY__
/* external functions for GPIO support
/* linux/include/asm-arm/arch-s3c2410/iic.h
*
- * (c) 2004 Simtec Electronics
+ * Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - I2C Controller platfrom_device info
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
/* linux/include/asm-arm/arch-s3c2410/map.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - Memory map definitions
*
*/
#ifndef __ASSEMBLY__
-#define S3C2410_ADDR(x) ((void __iomem *)0xF0000000 + (x))
+#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x))
#else
#define S3C2410_ADDR(x) (0xF0000000 + (x))
#endif
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* USB host controller */
-#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000)
#define S3C2400_PA_USBHOST (0x14200000)
#define S3C2410_PA_USBHOST (0x49000000)
#define S3C24XX_SZ_USBHOST SZ_1M
/* DMA controller */
-#define S3C24XX_VA_DMA S3C2410_ADDR(0x00300000)
#define S3C2400_PA_DMA (0x14600000)
#define S3C2410_PA_DMA (0x4B000000)
#define S3C24XX_SZ_DMA SZ_1M
/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00400000)
+#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000)
#define S3C2400_PA_CLKPWR (0x14800000)
#define S3C2410_PA_CLKPWR (0x4C000000)
#define S3C24XX_SZ_CLKPWR SZ_1M
/* LCD controller */
-#define S3C24XX_VA_LCD S3C2410_ADDR(0x00600000)
+#define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000)
#define S3C2400_PA_LCD (0x14A00000)
#define S3C2410_PA_LCD (0x4D000000)
#define S3C24XX_SZ_LCD SZ_1M
/* NAND flash controller */
-#define S3C24XX_VA_NAND S3C2410_ADDR(0x00700000)
#define S3C2410_PA_NAND (0x4E000000)
#define S3C24XX_SZ_NAND SZ_1M
/* MMC controller - available on the S3C2400 */
-#define S3C2400_VA_MMC S3C2400_ADDR(0x00700000)
#define S3C2400_PA_MMC (0x15A00000)
#define S3C2400_SZ_MMC SZ_1M
/* UARTs */
-#define S3C24XX_VA_UART S3C2410_ADDR(0x00800000)
+#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000)
#define S3C2400_PA_UART (0x15000000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_SZ_UART SZ_1M
/* Timers */
-#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00900000)
+#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000)
#define S3C2400_PA_TIMER (0x15100000)
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* USB Device port */
-#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00A00000)
+#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000)
#define S3C2400_PA_USBDEV (0x15200140)
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000)
+#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000)
#define S3C2400_PA_WATCHDOG (0x15300000)
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* IIC hardware controller */
-#define S3C24XX_VA_IIC S3C2410_ADDR(0x00C00000)
#define S3C2400_PA_IIC (0x15400000)
#define S3C2410_PA_IIC (0x54000000)
#define S3C24XX_SZ_IIC SZ_1M
-#define VA_IIC_BASE (S3C24XX_VA_IIC)
-
/* IIS controller */
-#define S3C24XX_VA_IIS S3C2410_ADDR(0x00D00000)
#define S3C2400_PA_IIS (0x15508000)
#define S3C2410_PA_IIS (0x55000000)
#define S3C24XX_SZ_IIS SZ_1M
#define S3C24XX_SZ_GPIO SZ_1M
/* RTC */
-#define S3C24XX_VA_RTC S3C2410_ADDR(0x00F00000)
#define S3C2400_PA_RTC (0x15700040)
#define S3C2410_PA_RTC (0x57000000)
#define S3C24XX_SZ_RTC SZ_1M
/* ADC */
-#define S3C24XX_VA_ADC S3C2410_ADDR(0x01000000)
#define S3C2400_PA_ADC (0x15800000)
#define S3C2410_PA_ADC (0x58000000)
#define S3C24XX_SZ_ADC SZ_1M
/* SPI */
-#define S3C24XX_VA_SPI S3C2410_ADDR(0x01100000)
#define S3C2400_PA_SPI (0x15900000)
#define S3C2410_PA_SPI (0x59000000)
#define S3C24XX_SZ_SPI SZ_1M
/* SDI */
-#define S3C24XX_VA_SDI S3C2410_ADDR(0x01200000)
#define S3C2410_PA_SDI (0x5A000000)
#define S3C24XX_SZ_SDI SZ_1M
/* linux/include/asm-arm/arch-s3c2410/nand.h
*
- * (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - NAND device controller platfrom_device info
*
/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
/* general configuration options */
#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT (0xFFFFFFF0)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
-#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
/* register address for the GPIO registers.
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4)
+#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
/* CAS pulse width */
#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trdc2 (0x00 << 2)
-#define S3C2410_BANKCON_Trdc3 (0x01 << 2)
-#define S3C2410_BANKCON_Trdc4 (0x02 << 2)
+#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
+#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
+#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
/* control column address select */
#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
unsigned char hwport; /* hardware port number */
unsigned char unused;
unsigned short flags;
- unsigned long uart_flags; /* default uart flags */
+ upf_t uart_flags; /* default uart flags */
unsigned long ucon; /* value of ucon for port */
unsigned long ulcon; /* value of ulcon for port */
/* linux/include/asm-arm/arch-s3c2410/system.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System function defines and includes
*
/* linux/include/asm-arm/arch-s3c2410/timex.h
*
- * (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - time parameters
*
/* linux/include/asm-arm/arch-s3c2410/uncompress.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - uncompress code
*
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
+typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
/* defines for UART registers */
#include "asm/arch/regs-serial.h"
/* linux/include/asm-arm/arch-s3c2410/usb-control.h
*
- * (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - usb port information
*
/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* VR1000 - CPLD control constants
*
/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine VR1000 - IRQ Number definitions
*
/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
*
- * (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine VR1000 - Memory map definitions
*
*/
extern void flush_dcache_page(struct page *);
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+static inline void flush_anon_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vmaddr)
+{
+ extern void __flush_anon_page(struct vm_area_struct *vma,
+ struct page *, unsigned long);
+ if (PageAnon(page))
+ __flush_anon_page(vma, page, vmaddr);
+}
+
#define flush_dcache_mmap_lock(mapping) \
write_lock_irq(&(mapping)->tree_lock)
#define flush_dcache_mmap_unlock(mapping) \
#define HWCAP_EDSP 128
#define HWCAP_JAVA 256
#define HWCAP_IWMMXT 512
+#define HWCAP_CRUNCH 1024
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
+/* An odd number of words will be pushed after this alignment, so
+ deliberately misalign the value. */
+#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
*/
__u32 fpinst;
__u32 fpinst2;
+#ifdef CONFIG_SMP
+ __u32 cpu;
+#endif
};
union vfp_state {
#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
/* General Purpose I/O */
-#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x000c)
+#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008)
/* Timers */
#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000)
#define NO_IRQ ((unsigned int)(-1))
#endif
-struct irqaction;
/*
* Migration helpers
#define IRQT_HIGH (__IRQT_HIGHLVL)
#define IRQT_PROBE IRQ_TYPE_PROBE
+#ifndef __ASSEMBLY__
+struct irqaction;
extern void migrate_irqs(void);
#endif
+#endif
+
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
+#include <linux/irqflags.h>
struct thread_info;
struct task_struct;
#define cpu_is_xscale() 1
#endif
+extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
+extern unsigned long cr_alignment; /* defined in entry-armv.S */
+
static inline unsigned int get_cr(void)
{
unsigned int val;
: : "r" (val) : "cc");
}
+#ifndef CONFIG_SMP
+extern void adjust_cr(unsigned long mask, unsigned long set);
+#endif
+
#define CPACC_FULL(n) (3 << (n * 2))
#define CPACC_SVC(n) (1 << (n * 2))
#define CPACC_DISABLE(n) (0 << (n * 2))
: : "r" (val) : "cc");
}
-extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
-extern unsigned long cr_alignment; /* defined in entry-armv.S */
-
-#ifndef CONFIG_SMP
-static inline void adjust_cr(unsigned long mask, unsigned long set)
-{
- unsigned long flags, cr;
-
- mask &= ~CR_A;
-
- set &= mask;
-
- local_irq_save(flags);
-
- cr_no_alignment = (cr_no_alignment & ~mask) | set;
- cr_alignment = (cr_alignment & ~mask) | set;
-
- set_cr((get_cr() & ~mask) | set);
-
- local_irq_restore(flags);
-}
-#endif
-
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)
{
}
-#include <linux/irqflags.h>
-
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
+ /* 335 for pselect6 */
+ /* 336 for ppoll */
+#define __NR_unshare (__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
+#define __NR_splice (__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
+#define __NR_tee (__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
+#define __NR_move_pages (__NR_SYSCALL_BASE+344)
+#define __NR_getcpu (__NR_SYSCALL_BASE+345)
+ /* 346 for epoll_pwait */
/*
* The following SWIs are ARM private.
#define WARN_ON(condition) ({ \
typeof(condition) __ret_warn_on = (condition); \
if (unlikely(__ret_warn_on)) { \
- printk("WARNING at %s:%d %s()\n", __FILE__, \
+ printk("BUG: at %s:%d %s()\n", __FILE__, \
__LINE__, __FUNCTION__); \
dump_stack(); \
} \
#define ATA_PRIMARY_CMD 0x1F0
#define ATA_PRIMARY_CTL 0x3F6
-#define ATA_PRIMARY_IRQ 14
+#define ATA_PRIMARY_IRQ(dev) 14
#define ATA_SECONDARY_CMD 0x170
#define ATA_SECONDARY_CTL 0x376
-#define ATA_SECONDARY_IRQ 15
+#define ATA_SECONDARY_IRQ(dev) 15
#endif
VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
*(.pci_fixup_enable) \
VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
+ *(.pci_fixup_resume) \
+ VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
} \
\
/* RapidIO route ops */ \
#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
-
-static inline int
-__acpi_acquire_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return (new < 3) ? -1 : 0;
-}
-
-static inline int
-__acpi_release_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = old & ~0x3;
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return old & 0x1;
-}
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
#define ASK_VGA 0xfffd /* ask for it at bootup */
/* Physical address where kenrel should be loaded. */
-#define LOAD_PHYSICAL_ADDR ((0x100000 + CONFIG_PHYSICAL_ALIGN - 1) \
+#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+ + (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))
#endif /* _LINUX_BOOT_H */
unsigned type);
extern void find_max_pfn(void);
extern void register_bootmem_low_pages(unsigned long max_low_pfn);
-extern void register_memory(void);
+extern void e820_register_memory(void);
extern void limit_regions(unsigned long long size);
extern void print_memory_map(char *who);
# define VDSO_PRELINK 0
#endif
-#define VDSO_COMPAT_SYM(x) \
- (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK)
-
#define VDSO_SYM(x) \
- (VDSO_BASE + (unsigned long)(x) - VDSO_PRELINK)
+ (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK)
#define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE)
#define VDSO_EHDR ((const struct elfhdr *) VDSO_COMPAT_BASE)
#define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall)
+#ifndef CONFIG_COMPAT_VDSO
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
struct linux_binprm;
extern int arch_setup_additional_pages(struct linux_binprm *bprm,
int executable_stack);
+#endif
extern unsigned int vdso_enabled;
NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_COMPAT_BASE); \
} while (0)
-/*
- * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the vsyscall DSO contents. Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the vsyscall DSO was being used.
- */
-#define ELF_CORE_EXTRA_PHDRS (VDSO_HIGH_EHDR->e_phnum)
-#define ELF_CORE_WRITE_EXTRA_PHDRS \
-do { \
- const struct elf_phdr *const vsyscall_phdrs = \
- (const struct elf_phdr *) (VDSO_HIGH_BASE \
- + VDSO_HIGH_EHDR->e_phoff); \
- int i; \
- Elf32_Off ofs = 0; \
- for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \
- struct elf_phdr phdr = vsyscall_phdrs[i]; \
- if (phdr.p_type == PT_LOAD) { \
- BUG_ON(ofs != 0); \
- ofs = phdr.p_offset = offset; \
- phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \
- phdr.p_filesz = phdr.p_memsz; \
- offset += phdr.p_filesz; \
- } \
- else \
- phdr.p_offset += ofs; \
- phdr.p_paddr = 0; /* match other core phdrs */ \
- DUMP_WRITE(&phdr, sizeof(phdr)); \
- } \
-} while (0)
-#define ELF_CORE_WRITE_EXTRA_DATA \
-do { \
- const struct elf_phdr *const vsyscall_phdrs = \
- (const struct elf_phdr *) (VDSO_HIGH_BASE \
- + VDSO_HIGH_EHDR->e_phoff); \
- int i; \
- for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \
- if (vsyscall_phdrs[i].p_type == PT_LOAD) \
- DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr, \
- PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \
- } \
-} while (0)
-
#endif
#endif
extern unsigned long __FIXADDR_TOP;
#else
#define __FIXADDR_TOP 0xfffff000
+#define FIXADDR_USER_START __fix_to_virt(FIX_VDSO)
+#define FIXADDR_USER_END __fix_to_virt(FIX_VDSO - 1)
#endif
#ifndef __ASSEMBLY__
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
+#ifndef CONFIG_COMPAT_VDSO
#define __HAVE_ARCH_GATE_AREA 1
+#endif
#endif /* __KERNEL__ */
#endif /* _I386_PAGE_H */
extern int sysenter_setup(void);
extern int init_gdt(int cpu, struct task_struct *idle);
+extern void cpu_set_gdt(int);
extern void secondary_cpu_init(void);
#endif /* __ASM_I386_PROCESSOR_H */
#define _HAVE_ARCH_IPV6_CSUM 1
struct in6_addr;
-extern unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
- struct in6_addr *daddr, __u32 len, unsigned short proto,
- unsigned int csum);
+extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr, __u32 len, unsigned short proto,
+ __wsum csum);
#endif /* _ASM_IA64_CHECKSUM_H */
#define pcibios_scan_all_fns(a, b) 0
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
+
#endif /* _ASM_IA64_PCI_H */
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
# else /* !__GNUC__ */
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/types.h>
+#include <linux/sched.h>
#include <asm/segment.h>
#define VERIFY_READ 0
*/
__wsum csum_partial(const void *buff, int len, __wsum sum);
+__wsum __csum_partial_copy_user(const void *src, void *dst,
+ int len, __wsum sum, int *err_ptr);
+
/*
* this is a new version of the above that records errors it finds in *errp,
* but continues and zeros the rest of the buffer.
*/
-__wsum csum_partial_copy_from_user(const void __user *src,
- void *dst, int len,
- __wsum sum, int *errp);
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+ __wsum sum, int *err_ptr)
+{
+ might_sleep();
+ return __csum_partial_copy_user((__force void *)src, dst,
+ len, sum, err_ptr);
+}
/*
* Copy and checksum to user
*/
#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user (const void *src, void __user *dst,
- int len, __wsum sum,
- int *err_ptr)
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+ __wsum sum, int *err_ptr)
{
might_sleep();
- sum = csum_partial(src, len, sum);
-
- if (copy_to_user(dst, src, len)) {
+ if (access_ok(VERIFY_WRITE, dst, len))
+ return __csum_partial_copy_user(src, (__force void *)dst,
+ len, sum, err_ptr);
+ if (len)
*err_ptr = -EFAULT;
- return (__force __wsum)-1;
- }
- return sum;
+ return (__force __wsum)-1; /* invalid checksum */
}
/*
#endif
" .set pop"
: "=r" (sum)
- : "0" (daddr), "r"(saddr),
+ : "0" ((__force unsigned long)daddr),
+ "r" ((__force unsigned long)saddr),
#ifdef __MIPSEL__
"r" ((proto + len) << 8),
#else
* processors.
*/
ASMMACRO(mtc0_tlbw_hazard,
- nop
+ nop; nop
)
ASMMACRO(tlbw_use_hazard,
nop; nop; nop
* functions will take over re-enabling the low-level mask.
* Otherwise it will be done on return from exception.
*/
-#define __DO_IRQ_SMTC_HOOK() \
+#define __DO_IRQ_SMTC_HOOK(irq) \
do { \
if (irq_hwmask[irq] & 0x0000ff00) \
write_c0_tccontext(read_c0_tccontext() & \
~(irq_hwmask[irq] & 0x0000ff00)); \
} while (0)
#else
-#define __DO_IRQ_SMTC_HOOK() do { } while (0)
+#define __DO_IRQ_SMTC_HOOK(irq) do { } while (0)
#endif
/*
#define do_IRQ(irq) \
do { \
irq_enter(); \
- __DO_IRQ_SMTC_HOOK(); \
+ __DO_IRQ_SMTC_HOOK(irq); \
generic_handle_irq(irq); \
irq_exit(); \
} while (0)
#include <asm/hazards.h>
+/*
+ * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs,
+ * at the cost of branch and call overhead on each local_irq_restore()
+ */
+
+#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+
+extern void smtc_ipi_replay(void);
+
+#define irq_restore_epilog(flags) \
+do { \
+ if (!(flags & 0x0400)) \
+ smtc_ipi_replay(); \
+} while (0)
+
+#else
+
+#define irq_restore_epilog(ignore) do { } while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+
__asm__ (
" .macro raw_local_irq_enable \n"
" .set push \n"
: "=r" (__tmp1) \
: "0" (flags) \
: "memory"); \
+ irq_restore_epilog(flags); \
} while(0)
static inline int raw_irqs_disabled_flags(unsigned long flags)
#define ZERO_PAGE(vaddr) \
(virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask))))
-#define __HAVE_ARCH_MOVE_PTE
-#define move_pte(pte, prot, old_addr, new_addr) \
-({ \
- pte_t newpte = (pte); \
- if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \
- pte_page(pte) == ZERO_PAGE(old_addr)) \
- newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \
- newpte; \
-})
-
extern void paging_init(void);
/*
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
+#define TIF_FREEZE 19
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
}
static inline void
-flush_anon_page(struct page *page, unsigned long vmaddr)
+flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
{
if (PageAnon(page))
flush_user_dcache_page(vmaddr);
/*
* Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1.
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
*/
static __inline__ int atomic_dec_if_positive(atomic_t *v)
{
__asm__ __volatile__(
LWSYNC_ON_SMP
"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
- addic. %0,%0,-1\n\
+ cmpwi %0,1\n\
+ addi %0,%0,-1\n\
blt- 2f\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
ISYNC_ON_SMP
"\n\
-2:" : "=&r" (t)
+2:" : "=&b" (t)
: "r" (&v->counter)
: "cc", "memory");
#define BUG_OPCODE .long 0x00b00b00 /* For asm */
#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
-#ifndef __ASSEMBLY__
-
#ifdef CONFIG_BUG
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+.macro EMIT_BUG_ENTRY addr,file,line,flags
+ .section __bug_table,"a"
+5001: PPC_LONG \addr, 5002f
+ .short \line, \flags
+ .org 5001b+BUG_ENTRY_SIZE
+ .previous
+ .section .rodata,"a"
+5002: .asciz "\file"
+ .previous
+.endm
+#else
+ .macro EMIT_BUG_ENTRY addr,file,line,flags
+ .section __bug_table,"a"
+5001: PPC_LONG \addr
+ .short \flags
+ .org 5001b+BUG_ENTRY_SIZE
+ .previous
+.endm
+#endif /* verbose */
+
+#else /* !__ASSEMBLY__ */
/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
sizeof(struct bug_entry), respectively */
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define HAVE_ARCH_BUG
#define HAVE_ARCH_BUG_ON
#define HAVE_ARCH_WARN_ON
-#endif /* CONFIG_BUG */
#endif /* __ASSEMBLY __ */
+#endif /* CONFIG_BUG */
#include <asm-generic/bug.h>
*/
#define __dma_alloc_coherent(gfp, size, handle) NULL
-#define __dma_free_coherent(size, addr) do { } while (0)
-#define __dma_sync(addr, size, rw) do { } while (0)
-#define __dma_sync_page(pg, off, sz, rw) do { } while (0)
+#define __dma_free_coherent(size, addr) ((void)0)
+#define __dma_sync(addr, size, rw) ((void)0)
+#define __dma_sync_page(pg, off, sz, rw) ((void)0)
#endif /* ! CONFIG_NOT_COHERENT_CACHE */
}
/* We do nothing. */
-#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
+#define dma_unmap_single(dev, addr, size, dir) ((void)0)
static inline dma_addr_t
dma_map_page(struct device *dev, struct page *page,
}
/* We do nothing. */
-#define dma_unmap_page(dev, handle, size, dir) do { } while (0)
+#define dma_unmap_page(dev, handle, size, dir) ((void)0)
static inline int
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
}
/* We don't do anything here. */
-#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+#define dma_unmap_sg(dev, sg, nents, dir) ((void)0)
#endif /* CONFIG_PPC64 */
unsigned long tb_total; /* total wall time (mftb) of calls. */
unsigned long purr_total; /* total cpu time (PURR) of calls. */
};
-void update_hcall_stats(unsigned long opcode, unsigned long tb_delta,
- unsigned long purr_delta);
#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
#endif /* __ASSEMBLY__ */
--- /dev/null
+#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
+#define __ASM_POWERPC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD 0x1F0
+#define ATA_PRIMARY_CTL 0x3F6
+#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0)
+
+#define ATA_SECONDARY_CMD 0x170
+#define ATA_SECONDARY_CTL 0x376
+#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1)
+
+#endif
extern void __iomem * mpc52xx_find_and_map(const char *);
extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
extern void mpc52xx_setup_cpu(void);
+extern void mpc52xx_declare_of_platform_devices(void);
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
extern long spu_sys_callback(struct spu_syscall_block *s);
/* syscalls implemented in spufs */
+struct file;
extern struct spufs_calls {
asmlinkage long (*create_thread)(const char __user *name,
unsigned int flags, mode_t mode);
* to object-id spufs file from user space and the notifer
* function can assume that spu->ctx is valid.
*/
+struct notifier_block;
int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
#ifdef __KERNEL__
#include <linux/futex.h>
+#include <linux/uaccess.h>
#include <asm/errno.h>
-#include <asm/uaccess.h>
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
+ pagefault_disable();
ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval);
+ pagefault_enable();
if (!ret) {
switch (cmp) {
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) \
- ((void) memset ((__ptr_t) (fdsetp), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set)))
#endif /* __KERNEL__ */
#define to_of_device(d) container_of(d, struct of_device, dev)
extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
-extern void of_iounmap(void __iomem *base, unsigned long size);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
extern struct of_device *of_find_device_by_node(struct device_node *);
#define to_of_device(d) container_of(d, struct of_device, dev)
extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
-extern void of_iounmap(void __iomem *base, unsigned long size);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
extern struct of_device *of_find_device_by_node(struct device_node *);
#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
-
-static inline int
-__acpi_acquire_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return (new < 3) ? -1 : 0;
-}
-
-static inline int
-__acpi_release_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = old & ~0x3;
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return old & 0x1;
-}
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
#include <asm/alternative.h>
-#define ADDR (*(volatile long *) addr)
+#if __GNUC__ < 4 || __GNUC_MINOR__ < 1
+/* Technically wrong, but this avoids compilation errors on some gcc
+ versions. */
+#define ADDR "=m" (*(volatile long *) addr)
+#else
+#define ADDR "+m" (*(volatile long *) addr)
+#endif
/**
* set_bit - Atomically set a bit in memory
{
__asm__ __volatile__( LOCK_PREFIX
"btsl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr) : "memory");
}
{
__asm__ volatile(
"btsl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr) : "memory");
}
{
__asm__ __volatile__( LOCK_PREFIX
"btrl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr));
}
{
__asm__ __volatile__(
"btrl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr));
}
{
__asm__ __volatile__(
"btcl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr));
}
{
__asm__ __volatile__( LOCK_PREFIX
"btcl %1,%0"
- :"+m" (ADDR)
+ :ADDR
:"dIr" (nr));
}
__asm__ __volatile__( LOCK_PREFIX
"btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr) : "memory");
return oldbit;
}
__asm__(
"btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr));
return oldbit;
}
__asm__ __volatile__( LOCK_PREFIX
"btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr) : "memory");
return oldbit;
}
__asm__(
"btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr));
return oldbit;
}
__asm__ __volatile__(
"btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr) : "memory");
return oldbit;
}
__asm__ __volatile__( LOCK_PREFIX
"btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
+ :"=r" (oldbit),ADDR
:"dIr" (nr) : "memory");
return oldbit;
}
__asm__ __volatile__(
"btl %2,%1\n\tsbbl %0,%0"
:"=r" (oldbit)
- :"m" (ADDR),"dIr" (nr));
+ :"m" (*(volatile long *)addr),"dIr" (nr));
return oldbit;
}
case 1: __put_user_asm(x,ptr,retval,"b","b","iq",-EFAULT); break;\
case 2: __put_user_asm(x,ptr,retval,"w","w","ir",-EFAULT); break;\
case 4: __put_user_asm(x,ptr,retval,"l","k","ir",-EFAULT); break;\
- case 8: __put_user_asm(x,ptr,retval,"q","","ir",-EFAULT); break;\
+ case 8: __put_user_asm(x,ptr,retval,"q","","Zr",-EFAULT); break;\
default: __put_user_bad(); \
} \
} while (0)
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
header-y += i2c-dev.h
header-y += i8k.h
header-y += icmp.h
-header-y += if_addr.h
header-y += if_arcnet.h
header-y += if_arp.h
header-y += if_bonding.h
header-y += if.h
header-y += if_hippi.h
header-y += if_infiniband.h
-header-y += if_link.h
header-y += if_packet.h
header-y += if_plip.h
header-y += if_ppp.h
header-y += nfs_mount.h
header-y += oom.h
header-y += param.h
-header-y += pci_ids.h
header-y += pci_regs.h
header-y += personality.h
header-y += pfkeyv2.h
header-y += ppdev.h
header-y += prctl.h
header-y += ps2esdi.h
-header-y += qic117.h
header-y += qnxtypes.h
header-y += quotaio_v1.h
header-y += quotaio_v2.h
header-y += raw.h
header-y += resource.h
header-y += rose.h
-header-y += sctp.h
header-y += smbno.h
header-y += snmp.h
header-y += sockios.h
header-y += wireless.h
header-y += xattr.h
header-y += x25.h
-header-y += zorro_ids.h
unifdef-y += acct.h
unifdef-y += adb.h
unifdef-y += i2c.h
unifdef-y += i2o-dev.h
unifdef-y += icmpv6.h
+unifdef-y += if_addr.h
unifdef-y += if_bridge.h
unifdef-y += if_ec.h
unifdef-y += if_eql.h
unifdef-y += if_fddi.h
unifdef-y += if_frad.h
unifdef-y += if_ltalk.h
+unifdef-y += if_link.h
unifdef-y += if_pppox.h
unifdef-y += if_shaper.h
unifdef-y += if_tr.h
ACPI_IRQ_MODEL_PIC = 0,
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
+ ACPI_IRQ_MODEL_PLATFORM,
ACPI_IRQ_MODEL_COUNT
};
};
extern struct backlight_device *backlight_device_register(const char *name,
- void *devdata, struct backlight_properties *bp);
+ struct device *dev,void *devdata,struct backlight_properties *bp);
extern void backlight_device_unregister(struct backlight_device *bd);
#define to_backlight_device(obj) container_of(obj, struct backlight_device, class_dev)
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
}
-/*
+/**
* rol32 - rotate a 32-bit value left
- *
* @word: value to rotate
* @shift: bits to roll
*/
return (word << shift) | (word >> (32 - shift));
}
-/*
+/**
* ror32 - rotate a 32-bit value right
- *
* @word: value to rotate
* @shift: bits to roll
*/
#include <linux/elevator.h>
-typedef int (merge_request_fn) (request_queue_t *, struct request *,
- struct bio *);
-typedef int (merge_requests_fn) (request_queue_t *, struct request *,
- struct request *);
typedef void (request_fn_proc) (request_queue_t *q);
typedef int (make_request_fn) (request_queue_t *q, struct bio *bio);
typedef int (prep_rq_fn) (request_queue_t *, struct request *);
struct request_list rq;
request_fn_proc *request_fn;
- merge_request_fn *back_merge_fn;
- merge_request_fn *front_merge_fn;
- merge_requests_fn *merge_requests_fn;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
unplug_fn *unplug_fn;
extern int sg_scsi_ioctl(struct file *, struct request_queue *,
struct gendisk *, struct scsi_ioctl_command __user *);
+/*
+ * Temporary export, until SCSI gets fixed up.
+ */
+extern int ll_back_merge_fn(request_queue_t *, struct request *, struct bio *);
+
/*
* A queue has just exitted congestion. Note this in the global counter of
* congested queues, and wake up anyone who was waiting for requests to be
extern void blk_run_queue(request_queue_t *);
extern void blk_start_queueing(request_queue_t *);
extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long);
-extern int blk_rq_unmap_user(struct request *);
+extern int blk_rq_unmap_user(struct bio *);
extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(request_queue_t *, struct request *,
struct sg_iovec *, int, unsigned int);
#include <linux/kdev_t.h>
#include <linux/list.h>
+struct file_operations;
+struct inode;
+struct module;
+
struct cdev {
struct kobject kobj;
struct module *owner;
struct cn_callback_entry {
struct list_head callback_entry;
struct cn_callback *cb;
- struct delayed_work work;
+ struct work_struct work;
struct cn_queue_dev *pdev;
struct cn_callback_id id;
extern int cpuset_memory_pressure_enabled;
extern void __cpuset_memory_pressure_bump(void);
-extern const struct file_operations proc_cpuset_operations;
+extern struct file_operations proc_cpuset_operations;
extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
extern void cpuset_lock(void);
int __ret = 0; \
\
if (unlikely(c)) { \
- if (debug_locks_silent || debug_locks_off()) \
+ if (debug_locks_off() && !debug_locks_silent) \
WARN_ON(1); \
__ret = 1; \
} \
return dev->is_registered;
}
+void driver_init(void);
+
/*
* High level routines for use by the bus drivers
*/
typedef void (elevator_merged_fn) (request_queue_t *, struct request *, int);
+typedef int (elevator_allow_merge_fn) (request_queue_t *, struct request *, struct bio *);
+
typedef int (elevator_dispatch_fn) (request_queue_t *, int);
typedef void (elevator_add_req_fn) (request_queue_t *, struct request *);
elevator_merge_fn *elevator_merge_fn;
elevator_merged_fn *elevator_merged_fn;
elevator_merge_req_fn *elevator_merge_req_fn;
+ elevator_allow_merge_fn *elevator_allow_merge_fn;
elevator_dispatch_fn *elevator_dispatch_fn;
elevator_add_req_fn *elevator_add_req_fn;
extern void free_fdtable_rcu(struct rcu_head *rcu);
extern void __init files_defer_init(void);
+static inline void free_fdtable(struct fdtable *fdt)
+{
+ call_rcu(&fdt->rcu, free_fdtable_rcu);
+}
+
static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
{
struct file * file = NULL;
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct address_space *,
struct page *, struct page *);
+ int (*launder_page) (struct page *);
};
struct backing_dev_info;
struct inode * bd_inode; /* will die */
int bd_openers;
struct mutex bd_mutex; /* open/close mutex */
- struct mutex bd_mount_mutex; /* mount mutex */
+ struct semaphore bd_mount_sem;
struct list_head bd_inodes;
void * bd_holder;
int bd_holders;
#define TAG_MASK 0xf8
#endif /* __KERNEL__ */
+#include <linux/types.h>
+
/*
* Command Header sizes for IOCTL commands
*/
-#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(u8))
-#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(u8))
-#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(u8))
+#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8))
+#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
+#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
#define IDE_DRIVE_TASK_INVALID -1
#define IDE_DRIVE_TASK_NO_DATA 0
static char *relatives[REL_MAX + 1] = {
[REL_X] = "X", [REL_Y] = "Y",
- [REL_Z] = "Z", [REL_HWHEEL] = "HWheel",
- [REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel",
- [REL_MISC] = "Misc",
+ [REL_Z] = "Z", [REL_RX] = "Rx",
+ [REL_RY] = "Ry", [REL_RZ] = "Rz",
+ [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial",
+ [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc",
};
static char *absolutes[ABS_MAX + 1] = {
#include <asm/cacheflush.h>
#ifndef ARCH_HAS_FLUSH_ANON_PAGE
-static inline void flush_anon_page(struct page *page, unsigned long vmaddr)
+static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
{
}
#endif
#define MAX_I2O_CONTROLLERS 32
#include <linux/ioctl.h>
+#include <linux/types.h>
/*
* I2O Control IOCTLs and structures
*/
#define I2O_MAGIC_NUMBER 'i'
-#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS])
+#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
#define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
#define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
#define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
#define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
#define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
#define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
-#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,u32)
+#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32)
#define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
#define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
#define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
} __attribute__ ((packed));
#ifdef __KERNEL__
+#include <linux/netdevice.h>
+
/* Define FDDI statistics structure */
struct fddi_statistics {
#ifndef _IF_TUNNEL_H_
#define _IF_TUNNEL_H_
+#include <linux/types.h>
+
#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0)
#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1)
#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2)
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0
+#define KEY_GAMES 0x1a1
+#define KEY_ZOOMIN 0x1a2
+#define KEY_ZOOMOUT 0x1a3
+#define KEY_ZOOMRESET 0x1a4
+#define KEY_WORDPROCESSOR 0x1a5
+#define KEY_EDITOR 0x1a6
+#define KEY_SPREADSHEET 0x1a7
+#define KEY_GRAPHICSEDITOR 0x1a8
+#define KEY_PRESENTATION 0x1a9
+#define KEY_DATABASE 0x1aa
+#define KEY_NEWS 0x1ab
+#define KEY_VOICEMAIL 0x1ac
+#define KEY_ADDRESSBOOK 0x1ad
+#define KEY_MESSENGER 0x1ae
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define IORESOURCE_ROM_COPY (1<<2) /* ROM is alloc'd copy, resource field overlaid */
#define IORESOURCE_ROM_BIOS_COPY (1<<3) /* ROM is BIOS copy, resource field overlaid */
+/* PCI control bits. Shares IORESOURCE_BITS with above PCI ROM. */
+#define IORESOURCE_PCI_FIXED (1<<4) /* Do not move resource */
+
/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
extern struct resource ioport_resource;
extern struct resource iomem_resource;
#include <asm/byteorder.h>
#include <asm/bug.h>
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
#define INT_MAX ((int)(~0U>>1))
#define INT_MIN (-INT_MAX - 1)
#define UINT_MAX (~0U)
struct subsys_attribute *);
#if defined(CONFIG_HOTPLUG)
-void kobject_uevent(struct kobject *kobj, enum kobject_action action);
-void kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
+int kobject_uevent(struct kobject *kobj, enum kobject_action action);
+int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp[]);
int add_uevent_var(char **envp, int num_envp, int *cur_index,
const char *format, ...)
__attribute__((format (printf, 7, 8)));
#else
-static inline void kobject_uevent(struct kobject *kobj, enum kobject_action action) { }
-static inline void kobject_uevent_env(struct kobject *kobj,
+static inline int kobject_uevent(struct kobject *kobj, enum kobject_action action)
+{ return 0; }
+static inline int kobject_uevent_env(struct kobject *kobj,
enum kobject_action action,
char *envp[])
-{ }
+{ return 0; }
static inline int add_uevent_var(char **envp, int num_envp, int *cur_index,
char *buffer, int buffer_size, int *cur_len,
#include <asm/types.h>
#include <linux/ioctl.h>
+#define KVM_API_VERSION 2
+
/*
* Architectural interrupt line count, and the size of the bitmap needed
* to hold them.
KVM_EXIT_DEBUG = 4,
KVM_EXIT_HLT = 5,
KVM_EXIT_MMIO = 6,
+ KVM_EXIT_IRQ_WINDOW_OPEN = 7,
+ KVM_EXIT_SHUTDOWN = 8,
};
/* for KVM_RUN */
__u32 vcpu;
__u32 emulated; /* skip current instruction */
__u32 mmio_completed; /* mmio request completed */
+ __u8 request_interrupt_window;
+ __u8 padding1[3];
/* out */
__u32 exit_type;
__u32 exit_reason;
__u32 instruction_length;
+ __u8 ready_for_interrupt_injection;
+ __u8 if_flag;
+ __u16 padding2;
+ __u64 cr8;
+ __u64 apic_base;
+
union {
/* KVM_EXIT_UNKNOWN */
struct {
#define KVMIO 0xAE
+#define KVM_GET_API_VERSION _IO(KVMIO, 1)
#define KVM_RUN _IOWR(KVMIO, 2, struct kvm_run)
#define KVM_GET_REGS _IOWR(KVMIO, 3, struct kvm_regs)
#define KVM_SET_REGS _IOW(KVMIO, 4, struct kvm_regs)
* Register FIS clearing BSY */
ATA_FLAG_DEBUGMSG = (1 << 13),
ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
+ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
- void (*set_mode) (struct ata_port *ap);
+ int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
void (*post_set_mode) (struct ata_port *ap);
- int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+ int (*check_atapi_dma) (struct ata_queued_cmd *qc);
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
{
+ qc->dma_dir = DMA_NONE;
qc->__sg = NULL;
qc->flags = 0;
qc->cursect = qc->cursg = qc->cursg_ofs = 0;
qc->nsect = 0;
qc->nbytes = qc->curbytes = 0;
+ qc->n_elem = 0;
qc->err_mask = 0;
+ qc->pad_len = 0;
ata_tf_init(qc->dev, &qc->tf);
INIT_LIST_HEAD(old);
}
-/*
+/**
* list_replace_rcu - replace old entry by new one
* @old : the element to be replaced
* @new : the new element to insert
*
- * The old entry will be replaced with the new entry atomically.
- * Note: 'old' should not be empty.
+ * The @old entry will be replaced with the @new entry atomically.
+ * Note: @old should not be empty.
*/
static inline void list_replace_rcu(struct list_head *old,
struct list_head *new)
}
}
-/*
+/**
* hlist_replace_rcu - replace old entry by new one
* @old : the element to be replaced
* @new : the new element to insert
*
- * The old entry will be replaced with the new entry atomically.
+ * The @old entry will be replaced with the @new entry atomically.
*/
static inline void hlist_replace_rcu(struct hlist_node *old,
struct hlist_node *new)
#define ADFS_SUPER_MAGIC 0xadf5
#define AFFS_SUPER_MAGIC 0xadff
+#define AFS_SUPER_MAGIC 0x5346414F
#define AUTOFS_SUPER_MAGIC 0x0187
#define CODA_SUPER_MAGIC 0x73757245
#define EFS_SUPER_MAGIC 0x414A53
#define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */
#define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */
#define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */
+#define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */
#ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */
#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
extern void set_dma_reserve(unsigned long new_dma_reserve);
-extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long);
+extern void memmap_init_zone(unsigned long, int, unsigned long,
+ unsigned long, enum memmap_context);
extern void setup_per_zone_pages_min(void);
extern void mem_init(void);
extern void show_mem(void);
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
-#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
void wakeup_kswapd(struct zone *zone, int order);
int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
int classzone_idx, int alloc_flags);
-
+enum memmap_context {
+ MEMMAP_EARLY,
+ MEMMAP_HOTPLUG,
+};
extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn,
- unsigned long size);
+ unsigned long size,
+ enum memmap_context context);
#ifdef CONFIG_HAVE_MEMORY_PRESENT
void memory_present(int nid, unsigned long start, unsigned long end);
struct mtd_info *mtd;
struct mutex lock;
int devnum;
- int blksize;
unsigned long size;
int readonly;
void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */
char *name;
int major;
int part_bits;
+ int blksize;
+ int blkshift;
/* Access functions */
int (*readsect)(struct mtd_blktrans_dev *dev,
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
-#define MAX_MTD_DEVICES 16
+#define MAX_MTD_DEVICES 32
#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
* struct mtd_oob_ops - oob operation operands
* @mode: operation mode
*
- * @len: number of bytes to write/read. When a data buffer is given
- * (datbuf != NULL) this is the number of data bytes. When
- * no data buffer is available this is the number of oob bytes.
+ * @len: number of data bytes to write/read
*
- * @retlen: number of bytes written/read. When a data buffer is given
- * (datbuf != NULL) this is the number of data bytes. When
- * no data buffer is available this is the number of oob bytes.
+ * @retlen: number of data bytes written/read
*
- * @ooblen: number of oob bytes per page
+ * @ooblen: number of oob bytes to write/read
+ * @oobretlen: number of oob bytes written/read
* @ooboffs: offset of oob data in the oob area (only relevant when
* mode = MTD_OOB_PLACE)
* @datbuf: data buffer - if NULL only oob data are read/written
size_t len;
size_t retlen;
size_t ooblen;
+ size_t oobretlen;
uint32_t ooboffs;
uint8_t *datbuf;
uint8_t *oobbuf;
/* ECC status information */
struct mtd_ecc_stats ecc_stats;
+ /* Subpage shift (NAND) */
+ int subpage_sft;
void *priv;
struct module *owner;
int usecount;
+
+ /* If the driver is something smart, like UBI, it may need to maintain
+ * its own reference counting. The below functions are only for driver.
+ * The driver may register its callbacks. These callbacks are not
+ * supposed to be called by MTD users */
+ int (*get_device) (struct mtd_info *mtd);
+ void (*put_device) (struct mtd_info *mtd);
};
extern int del_mtd_device (struct mtd_info *mtd);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
extern void put_mtd_device(struct mtd_info *mtd);
* for all large page devices, as they do not support
* autoincrement.*/
#define NAND_NO_READRDY 0x00000100
+/* Chip does not allow subpage writes */
+#define NAND_NO_SUBPAGE_WRITE 0x00000200
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS \
/* Nand scan has allocated controller struct */
#define NAND_CONTROLLER_ALLOC 0x80000000
+/* Cell info constants */
+#define NAND_CI_CHIPNR_MSK 0x03
+#define NAND_CI_CELLTYPE_MSK 0x0C
/*
* nand_state_t - chip states
* struct nand_buffers - buffer structure for read/write
* @ecccalc: buffer for calculated ecc
* @ecccode: buffer for ecc read from flash
- * @oobwbuf: buffer for write oob data
* @databuf: buffer for data - dynamically sized
- * @oobrbuf: buffer to read oob data
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* consecutive order.
struct nand_buffers {
uint8_t ecccalc[NAND_MAX_OOBSIZE];
uint8_t ecccode[NAND_MAX_OOBSIZE];
- uint8_t oobwbuf[NAND_MAX_OOBSIZE];
- uint8_t databuf[NAND_MAX_PAGESIZE];
- uint8_t oobrbuf[NAND_MAX_OOBSIZE];
+ uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
};
/**
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
* @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
+ * @subpagesize: [INTERN] holds the subpagesize
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
unsigned long chipsize;
int pagemask;
int pagebuf;
+ int subpagesize;
+ uint8_t cellinfo;
int badblockpos;
nand_state_t state;
#define __LINUX_MTD_ONENAND_H
#include <linux/spinlock.h>
+#include <linux/completion.h>
#include <linux/mtd/onenand_regs.h>
#include <linux/mtd/bbm.h>
FL_WRITING,
FL_ERASING,
FL_SYNCING,
- FL_UNLOCKING,
FL_LOCKING,
FL_RESETING,
FL_OTPING,
* operation is in progress
* @state: [INTERN] the current state of the OneNAND device
* @page_buf: data buffer
+ * @subpagesize: [INTERN] holds the subpagesize
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbm: [REPLACEABLE] pointer to Bad Block Management
* @priv: [OPTIONAL] pointer to private chip date
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
int (*scan_bbt)(struct mtd_info *mtd);
+ struct completion complete;
+ int irq;
+
spinlock_t chip_lock;
wait_queue_head_t wq;
onenand_state_t state;
unsigned char *page_buf;
+ int subpagesize;
struct nand_ecclayout *ecclayout;
void *bbm;
#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index)
#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
+#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
#define ONENAND_GET_SYS_CFG1(this) \
(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
* ECC Status Reigser FF00h (R)
*/
#define ONENAND_ECC_1BIT (1 << 0)
+#define ONENAND_ECC_1BIT_ALL (0x5555)
#define ONENAND_ECC_2BIT (1 << 1)
#define ONENAND_ECC_2BIT_ALL (0xAAAA)
#include <linux/types.h>
#include <linux/ioctl.h>
-#include <linux/qic117.h>
/*
* Structures and definitions for mag tape io control commands
#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
#define MT_ISFTAPE_FLAG 0x800000
-struct mt_tape_info {
- long t_type; /* device type id (mt_type) */
- char *t_name; /* descriptive name */
-};
-
-#define MT_TAPE_INFO { \
- {MT_ISUNKNOWN, "Unknown type of tape device"}, \
- {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \
- {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \
- {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \
- {MT_ISCMSJ500, "CMS Jumbo 500"}, \
- {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \
- {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \
- {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \
- {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \
- {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \
- {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
- {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \
- {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \
- {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \
- {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \
- {MT_ISSCSI1, "Generic SCSI-1 tape"}, \
- {MT_ISSCSI2, "Generic SCSI-2 tape"}, \
- {0, NULL} \
-}
-
/* structure for MTIOCPOS - mag tape get position command */
};
-/* structure for MTIOCVOLINFO, query information about the volume
- * currently positioned at (zftape)
- */
-struct mtvolinfo {
- unsigned int mt_volno; /* vol-number */
- unsigned int mt_blksz; /* blocksize used when recording */
- unsigned int mt_rawsize; /* raw tape space consumed, in kb */
- unsigned int mt_size; /* volume size after decompression, in kb */
- unsigned int mt_cmpr:1; /* this volume has been compressed */
-};
-
-/* raw access to a floppy drive, read and write an arbitrary segment.
- * For ftape/zftape to support formatting etc.
- */
-#define MT_FT_RD_SINGLE 0
-#define MT_FT_RD_AHEAD 1
-#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */
-#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */
-#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */
-#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */
-
-struct mtftseg
-{
- unsigned mt_segno; /* the segment to read or write */
- unsigned mt_mode; /* modes for read/write (sync/async etc.) */
- int mt_result; /* result of r/w request, not of the ioctl */
- void __user *mt_data; /* User space buffer: must be 29kb */
-};
-
-/* get tape capacity (ftape/zftape)
- */
-struct mttapesize {
- unsigned long mt_capacity; /* entire, uncompressed capacity
- * of a cartridge
- */
- unsigned long mt_used; /* what has been used so far, raw
- * uncompressed amount
- */
-};
-
-/* possible values of the ftfmt_op field
- */
-#define FTFMT_SET_PARMS 1 /* set software parms */
-#define FTFMT_GET_PARMS 2 /* get software parms */
-#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */
-#define FTFMT_STATUS 4 /* monitor formatting a tape track */
-#define FTFMT_VERIFY 5 /* verify the given segment */
-
-struct ftfmtparms {
- unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */
- unsigned char ft_fmtcode; /* Refer to the QIC specs */
- unsigned char ft_fhm; /* floppy head max */
- unsigned char ft_ftm; /* floppy track max */
- unsigned short ft_spt; /* segments per track */
- unsigned short ft_tpc; /* tracks per cartridge */
-};
-
-struct ftfmttrack {
- unsigned int ft_track; /* track to format */
- unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */
-};
-
-struct ftfmtstatus {
- unsigned int ft_segment; /* segment currently being formatted */
-};
-
-struct ftfmtverify {
- unsigned int ft_segment; /* segment to verify */
- unsigned long ft_bsm; /* bsm as result of VERIFY cmd */
-};
-
-struct mtftformat {
- unsigned int fmt_op; /* operation to perform */
- union fmt_arg {
- struct ftfmtparms fmt_parms; /* format parameters */
- struct ftfmttrack fmt_track; /* ctrl while formatting */
- struct ftfmtstatus fmt_status;
- struct ftfmtverify fmt_verify; /* for verifying */
- } fmt_arg;
-};
-
-struct mtftcmd {
- unsigned int ft_wait_before; /* timeout to wait for drive to get ready
- * before command is sent. Milliseconds
- */
- qic117_cmd_t ft_cmd; /* command to send */
- unsigned char ft_parm_cnt; /* zero: no parm is sent. */
- unsigned char ft_parms[3]; /* parameter(s) to send to
- * the drive. The parms are nibbles
- * driver sends cmd + 2 step pulses */
- unsigned int ft_result_bits; /* if non zero, number of bits
- * returned by the tape drive
- */
- unsigned int ft_result; /* the result returned by the tape drive*/
- unsigned int ft_wait_after; /* timeout to wait for drive to get ready
- * after command is sent. 0: don't wait */
- int ft_status; /* status returned by ready wait
- * undefined if timeout was 0.
- */
- int ft_error; /* error code if error status was set by
- * command
- */
-};
-
/* mag tape io control commands */
#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */
-/* The next two are used by the QIC-02 driver for runtime reconfiguration.
- * See tpqic02.h for struct mtconfiginfo.
- */
-#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */
-#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */
-
-/* the next six are used by the floppy ftape drivers and its frontends
- * sorry, but MTIOCTOP commands are write only.
- */
-#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */
-#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */
-#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */
-#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/
-#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */
-#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */
/* Generic Mag Tape (device independent) status macros for examining
* mt_gstat -- HP-UX compatible.
extern void __mutex_init(struct mutex *lock, const char *name,
struct lock_class_key *key);
-/***
+/**
* mutex_is_locked - is the mutex locked
* @lock: the mutex to be queried
*
#define _LINUX_NET_H
#include <linux/wait.h>
-#include <linux/random.h>
#include <asm/socket.h>
struct poll_table_struct;
#ifdef __KERNEL__
#include <linux/stringify.h>
+#include <linux/random.h>
#define SOCK_ASYNC_NOSPACE 0
#define SOCK_ASYNC_WAITDATA 1
static inline void netif_poll_enable(struct net_device *dev)
{
+ smp_mb__before_clear_bit();
clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
}
#define IP_CT_TCP_FLAG_SACK_PERM 0x02
/* This sender sent FIN first */
-#define IP_CT_TCP_FLAG_CLOSE_INIT 0x03
+#define IP_CT_TCP_FLAG_CLOSE_INIT 0x04
#ifdef __KERNEL__
/* The argument to ARPT_SO_ADD_COUNTERS. */
#define arpt_counters_info xt_counters_info
+#define arpt_counters xt_counters
/* The argument to ARPT_SO_GET_ENTRIES. */
struct arpt_get_entries
#include <linux/netfilter/x_tables.h>
#define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
-#define IPT_TABLE_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
+#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
#define ipt_match xt_match
#define ipt_target xt_target
#define ipt_table xt_table
extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode);
extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *);
extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping);
+extern int nfs_revalidate_mapping_nolock(struct inode *inode, struct address_space *mapping);
extern int nfs_setattr(struct dentry *, struct iattr *);
extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr);
extern void nfs_begin_attr_update(struct inode *);
struct readdir_cd {
__be32 err; /* 0, nfserr, or nfserr_eof */
};
-typedef int (*encode_dent_fn)(struct readdir_cd *, const char *,
- int, loff_t, ino_t, unsigned int);
typedef int (*nfsd_dirop_t)(struct inode *, struct dentry *, int, int);
extern struct svc_program nfsd_program;
int nfsd_truncate(struct svc_rqst *, struct svc_fh *,
unsigned long size);
__be32 nfsd_readdir(struct svc_rqst *, struct svc_fh *,
- loff_t *, struct readdir_cd *, encode_dent_fn);
+ loff_t *, struct readdir_cd *, filldir_t);
__be32 nfsd_statfs(struct svc_rqst *, struct svc_fh *,
struct kstatfs *);
static __inline__ struct svc_fh *
fh_copy(struct svc_fh *dst, struct svc_fh *src)
{
- if (src->fh_dentry || src->fh_locked) {
- struct dentry *dentry = src->fh_dentry;
- printk(KERN_ERR "fh_copy: copying %s/%s, already verified!\n",
- dentry->d_parent->d_name.name, dentry->d_name.name);
- }
+ WARN_ON(src->fh_dentry || src->fh_locked);
*dst = *src;
return dst;
dfprintk(FILEOP, "nfsd: fh_lock(%s) locked = %d\n",
SVCFH_fmt(fhp), fhp->fh_locked);
- if (!fhp->fh_dentry) {
- printk(KERN_ERR "fh_lock: fh not verified!\n");
- return;
- }
+ BUG_ON(!dentry);
+
if (fhp->fh_locked) {
printk(KERN_WARNING "fh_lock: %s/%s already locked!\n",
dentry->d_parent->d_name.name, dentry->d_name.name);
static inline void
fh_unlock(struct svc_fh *fhp)
{
- if (!fhp->fh_dentry)
- printk(KERN_ERR "fh_unlock: fh not verified!\n");
+ BUG_ON(!fhp->fh_dentry);
if (fhp->fh_locked) {
fill_post_wcc(fhp);
int nfssvc_encode_statfsres(struct svc_rqst *, __be32 *, struct nfsd_statfsres *);
int nfssvc_encode_readdirres(struct svc_rqst *, __be32 *, struct nfsd_readdirres *);
-int nfssvc_encode_entry(struct readdir_cd *, const char *name,
- int namlen, loff_t offset, ino_t ino, unsigned int);
+int nfssvc_encode_entry(void *, const char *name,
+ int namlen, loff_t offset, u64 ino, unsigned int);
int nfssvc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *);
struct nfsd3_attrstat *);
int nfs3svc_release_fhandle2(struct svc_rqst *, __be32 *,
struct nfsd3_fhandle_pair *);
-int nfs3svc_encode_entry(struct readdir_cd *, const char *name,
- int namlen, loff_t offset, ino_t ino,
+int nfs3svc_encode_entry(void *, const char *name,
+ int namlen, loff_t offset, u64 ino,
unsigned int);
-int nfs3svc_encode_entry_plus(struct readdir_cd *, const char *name,
- int namlen, loff_t offset, ino_t ino,
+int nfs3svc_encode_entry_plus(void *, const char *name,
+ int namlen, loff_t offset, u64 ino,
unsigned int);
/* Helper functions for NFSv3 ACL code */
__be32 *nfs3svc_encode_post_op_attr(struct svc_rqst *rqstp, __be32 *p,
int copy_namespaces(int flags, struct task_struct *tsk);
void get_task_namespaces(struct task_struct *tsk);
void free_nsproxy(struct nsproxy *ns);
+struct nsproxy *put_nsproxy(struct nsproxy *ns);
-static inline void put_nsproxy(struct nsproxy *ns)
+static inline void finalize_put_nsproxy(struct nsproxy *ns)
{
- if (atomic_dec_and_test(&ns->count)) {
+ if (ns)
free_nsproxy(ns);
- }
}
-static inline void exit_task_namespaces(struct task_struct *p)
+static inline void put_and_finalize_nsproxy(struct nsproxy *ns)
{
- struct nsproxy *ns = p->nsproxy;
- if (ns) {
- task_lock(p);
- p->nsproxy = NULL;
- task_unlock(p);
- put_nsproxy(ns);
- }
+ finalize_put_nsproxy(put_nsproxy(ns));
+}
+
+static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p)
+{
+ return put_nsproxy(p->nsproxy);
+}
+
+static inline void exit_task_namespaces(struct task_struct *p,
+ struct nsproxy *ns)
+{
+ task_lock(p);
+ p->nsproxy = NULL;
+ task_unlock(p);
+ finalize_put_nsproxy(ns);
}
#endif
struct page; /* forward declaration */
-int test_clear_page_dirty(struct page *page);
+extern void cancel_dirty_page(struct page *page, unsigned int account_size);
+
int test_clear_page_writeback(struct page *page);
int test_set_page_writeback(struct page *page);
-static inline void clear_page_dirty(struct page *page)
-{
- test_clear_page_dirty(page);
-}
-
static inline void set_page_writeback(struct page *page)
{
test_set_page_writeback(page);
/* Include the pci register defines */
#include <linux/pci_regs.h>
-/* Include the ID list */
-#include <linux/pci_ids.h>
-
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
#include <asm/atomic.h>
#include <linux/device.h>
+/* Include the ID list */
+#include <linux/pci_ids.h>
+
/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
pci_mmap_io,
*/
#define pci_module_init pci_register_driver
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vend: the vendor name
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vendor, device) \
+ PCI_VENDOR_ID_##vendor, (device), \
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0
+
/* these external functions are only available when PCI support is enabled */
#ifdef CONFIG_PCI
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability (struct pci_dev *dev, int cap);
+int pci_find_ht_capability (struct pci_dev *dev, int ht_cap);
+int pci_find_next_ht_capability (struct pci_dev *dev, int pos, int ht_cap);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
struct pci_dev *pci_get_bus_and_slot (unsigned int bus, unsigned int devfn);
struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from);
int pci_dev_present(const struct pci_device_id *ids);
+const struct pci_device_id *pci_find_present(const struct pci_device_id *ids);
int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val);
int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val);
{ return NULL; }
#define pci_dev_present(ids) (0)
+#define pci_find_present(ids) (NULL)
#define pci_dev_put(dev) do { } while (0)
static inline void pci_set_master(struct pci_dev *dev) { }
pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
+ pci_fixup_resume, /* pci_enable_device() time */
};
/* Anonymous variables would be nice... */
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
+ resume##vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
+#define PCI_BASE_CLASS_WIRELESS 0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10
+#define PCI_CLASS_WIRELESS_WHCI 0x0d1010
+
#define PCI_BASE_CLASS_INTELLIGENT 0x0e
#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
#define PCI_DEVICE_ID_VIA_82C561 0x0561
#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
#define PCI_DEVICE_ID_VIA_82C576 0x0576
-#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x0581
#define PCI_DEVICE_ID_VIA_82C586_0 0x0586
#define PCI_DEVICE_ID_VIA_82C596 0x0596
#define PCI_DEVICE_ID_VIA_82C597_0 0x0597
#define PCI_DEVICE_ID_VIA_8237 0x3227
#define PCI_DEVICE_ID_VIA_8251 0x3287
#define PCI_DEVICE_ID_VIA_8237A 0x3337
+#define PCI_DEVICE_ID_VIA_8237S 0x3372
+#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
#define PCI_DEVICE_ID_VIA_8231 0x8231
#define PCI_DEVICE_ID_VIA_8231_4 0x8235
#define PCI_DEVICE_ID_VIA_8365_1 0x8305
#define PCI_PWR_CAP 12 /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
-/* Hypertransport sub capability types */
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK 0xE0
#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */
#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK 0xF8
#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */
#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */
#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */
#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */
#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */
#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */
+#define HT_MSI_FLAGS 0x02 /* Offset to flags */
+#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */
+#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */
+#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */
+#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */
+#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */
+#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
#define CPU_PROFILING 1
#define SCHED_PROFILING 2
#define SLEEP_PROFILING 3
+#define KVM_PROFILING 4
struct proc_dir_entry;
struct pt_regs;
+++ /dev/null
-#ifndef _QIC117_H
-#define _QIC117_H
-
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- * (C) 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:32 $
- *
- * This file contains QIC-117 spec. related definitions for the
- * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
- *
- * These data were taken from the Quarter-Inch Cartridge
- * Drive Standards, Inc. document titled:
- * `Common Command Set Interface Specification for Flexible
- * Disk Controller Based Minicartridge Tape Drives'
- * document QIC-117 Revision J, 28 Aug 96.
- * For more information, contact:
- * Quarter-Inch Cartridge Drive Standards, Inc.
- * 311 East Carrillo Street
- * Santa Barbara, California 93101
- * Telephone (805) 963-3853
- * Fax (805) 962-1541
- * WWW http://www.qic.org
- *
- * Current QIC standard revisions (of interest) are:
- * QIC-40-MC, Rev. M, 2 Sep 92.
- * QIC-80-MC, Rev. N, 20 Mar 96.
- * QIC-80-MC, Rev. K, 15 Dec 94.
- * QIC-113, Rev. G, 15 Jun 95.
- * QIC-117, Rev. J, 28 Aug 96.
- * QIC-122, Rev. B, 6 Mar 91.
- * QIC-130, Rev. C, 2 Sep 92.
- * QIC-3010-MC, Rev. F, 14 Jun 95.
- * QIC-3020-MC, Rev. G, 31 Aug 95.
- * QIC-CRF3, Rev. B, 15 Jun 95.
- * */
-
-/*
- * QIC-117 common command set rev. J.
- * These commands are sent to the tape unit
- * as number of pulses over the step line.
- */
-
-typedef enum {
- QIC_NO_COMMAND = 0,
- QIC_RESET = 1,
- QIC_REPORT_NEXT_BIT = 2,
- QIC_PAUSE = 3,
- QIC_MICRO_STEP_PAUSE = 4,
- QIC_ALTERNATE_TIMEOUT = 5,
- QIC_REPORT_DRIVE_STATUS = 6,
- QIC_REPORT_ERROR_CODE = 7,
- QIC_REPORT_DRIVE_CONFIGURATION = 8,
- QIC_REPORT_ROM_VERSION = 9,
- QIC_LOGICAL_FORWARD = 10,
- QIC_PHYSICAL_REVERSE = 11,
- QIC_PHYSICAL_FORWARD = 12,
- QIC_SEEK_HEAD_TO_TRACK = 13,
- QIC_SEEK_LOAD_POINT = 14,
- QIC_ENTER_FORMAT_MODE = 15,
- QIC_WRITE_REFERENCE_BURST = 16,
- QIC_ENTER_VERIFY_MODE = 17,
- QIC_STOP_TAPE = 18,
-/* commands 19-20: reserved */
- QIC_MICRO_STEP_HEAD_UP = 21,
- QIC_MICRO_STEP_HEAD_DOWN = 22,
- QIC_SOFT_SELECT = 23,
- QIC_SOFT_DESELECT = 24,
- QIC_SKIP_REVERSE = 25,
- QIC_SKIP_FORWARD = 26,
- QIC_SELECT_RATE = 27,
-/* command 27, in ccs2: Select Rate or Format */
- QIC_ENTER_DIAGNOSTIC_1 = 28,
- QIC_ENTER_DIAGNOSTIC_2 = 29,
- QIC_ENTER_PRIMARY_MODE = 30,
-/* command 31: vendor unique */
- QIC_REPORT_VENDOR_ID = 32,
- QIC_REPORT_TAPE_STATUS = 33,
- QIC_SKIP_EXTENDED_REVERSE = 34,
- QIC_SKIP_EXTENDED_FORWARD = 35,
- QIC_CALIBRATE_TAPE_LENGTH = 36,
- QIC_REPORT_FORMAT_SEGMENTS = 37,
- QIC_SET_FORMAT_SEGMENTS = 38,
-/* commands 39-45: reserved */
- QIC_PHANTOM_SELECT = 46,
- QIC_PHANTOM_DESELECT = 47
-} qic117_cmd_t;
-
-typedef enum {
- discretional = 0, required, ccs1, ccs2
-} qic_compatibility;
-
-typedef enum {
- unused, mode, motion, report
-} command_types;
-
-struct qic117_command_table {
- char *name;
- __u8 mask;
- __u8 state;
- __u8 cmd_type;
- __u8 non_intr;
- __u8 level;
-};
-
-#define QIC117_COMMANDS {\
-/* command mask state cmd_type */\
-/* | name | | | non_intr */\
-/* | | | | | | level */\
-/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\
-/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\
-/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\
-/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\
-/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\
-/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\
-/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\
-/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\
-/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\
-/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\
-/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\
-/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\
-/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\
-/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\
-/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\
-/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\
-/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\
-/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\
-/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\
-/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\
-/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\
-/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\
-/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\
-/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\
-/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\
-/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\
-/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\
-/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\
-/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\
-/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\
-/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\
-/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\
-/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\
-/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\
-/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\
-/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\
-/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\
-/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\
-/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\
-/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\
-/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\
-/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\
-/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\
-/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\
-/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\
-/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\
-/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\
-/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\
-}
-
-/*
- * Status bits returned by QIC_REPORT_DRIVE_STATUS
- */
-
-#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */
-#define QIC_STATUS_ERROR 0x02 /* Error detected, must read
- error code to clear this */
-#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */
-#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */
-#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must
- read error status to clear. */
-#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been
- formatted. */
-#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical
- beginning of tape. */
-#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end
- of tape. */
-/*
- * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION
- */
-
-#define QIC_CONFIG_RATE_MASK 0x18
-#define QIC_CONFIG_RATE_SHIFT 3
-#define QIC_CONFIG_RATE_250 0
-#define QIC_CONFIG_RATE_500 2
-#define QIC_CONFIG_RATE_1000 3
-#define QIC_CONFIG_RATE_2000 1
-#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */
-
-#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */
-#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */
-
-/*
- * Status bits returned by QIC_REPORT_TAPE_STATUS
- */
-
-#define QIC_TAPE_STD_MASK 0x0f
-#define QIC_TAPE_QIC40 0x01
-#define QIC_TAPE_QIC80 0x02
-#define QIC_TAPE_QIC3020 0x03
-#define QIC_TAPE_QIC3010 0x04
-
-#define QIC_TAPE_LEN_MASK 0x70
-#define QIC_TAPE_205FT 0x10
-#define QIC_TAPE_307FT 0x20
-#define QIC_TAPE_VARIABLE 0x30
-#define QIC_TAPE_1100FT 0x40
-#define QIC_TAPE_FLEX 0x60
-
-#define QIC_TAPE_WIDE 0x80
-
-/* Define a value (in feet) slightly higher than
- * the possible maximum tape length.
- */
-#define QIC_TOP_TAPE_LEN 1500
-
-/*
- * Errors: List of error codes, and their severity.
- */
-
-typedef struct {
- char *message; /* Text describing the error. */
- unsigned int fatal:1; /* Non-zero if the error is fatal. */
-} ftape_error;
-
-#define QIC117_ERRORS {\
- /* 0*/ { "No error", 0, },\
- /* 1*/ { "Command Received while Drive Not Ready", 0, },\
- /* 2*/ { "Cartridge Not Present or Removed", 1, },\
- /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\
- /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\
- /* 5*/ { "Cartridge Write Protected", 1, },\
- /* 6*/ { "Undefined or Reserved Command Code", 1, },\
- /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\
- /* 8*/ { "Illegal Command in Report Subcontext", 0, },\
- /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\
- /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\
- /*11*/ { "Warning--Read Gain Setting Error", 1, },\
- /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\
- /*13*/ { "Command Received While New Cartridge Pending", 1, },\
- /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\
- /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\
- /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\
- /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\
- /*18*/ { "Logical EOT Before All Segments generated", 1, },\
- /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\
- /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\
- /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\
- /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\
- /*23*/ { "Motion Time-out Error", 1, },\
- /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\
- /*25*/ { "Transmit Overrun (obs)", 1, },\
- /*26*/ { "Power On Reset Occurred", 0, },\
- /*27*/ { "Software Reset Occurred", 0, },\
- /*28*/ { "Diagnostic Mode 1 Error", 1, },\
- /*29*/ { "Diagnostic Mode 2 Error", 1, },\
- /*30*/ { "Command Received During Non-Interruptible Process", 1, },\
- /*31*/ { "Rate or Format Selection Error", 1, },\
- /*32*/ { "Illegal Command While in High Speed Mode", 1, },\
- /*33*/ { "Illegal Seek Segment Value", 1, },\
- /*34*/ { "Invalid Media", 1, },\
- /*35*/ { "Head Positioning Failure", 1, },\
- /*36*/ { "Write Reference Burst Failure", 1, },\
- /*37*/ { "Prom Code Missing", 1, },\
- /*38*/ { "Invalid Format", 1, },\
- /*39*/ { "EOT/BOT System Failure", 1, },\
- /*40*/ { "Prom A Checksum Error", 1, },\
- /*41*/ { "Drive Wakeup Reset Occurred", 1, },\
- /*42*/ { "Prom B Checksum Error", 1, },\
- /*43*/ { "Illegal Entry into Format Mode", 1, },\
-}
-
-#endif /* _QIC117_H */
struct page *page, int rw);
extern void md_do_sync(mddev_t *mddev);
extern void md_new_event(mddev_t *mddev);
-
+extern void md_allow_write(mddev_t *mddev);
#endif /* CONFIG_MD */
#endif
i_link_saved_truncate_mask = 0x0020,
i_has_xattr_dir = 0x0040,
i_data_log = 0x0080,
+ i_ever_mapped = 0x0100
} reiserfs_inode_flags;
struct reiserfs_inode_info {
** flushed */
unsigned long i_trans_id;
struct reiserfs_journal_list *i_jl;
+ struct mutex i_mmap;
#ifdef CONFIG_REISERFS_FS_POSIX_ACL
struct posix_acl *i_acl_access;
struct posix_acl *i_acl_default;
void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
void page_add_file_rmap(struct page *);
-void page_remove_rmap(struct page *);
+void page_remove_rmap(struct page *, struct vm_area_struct *);
/**
* page_dup_rmap - duplicate pte mapping to a page
#include <linux/plist.h>
#include <linux/spinlock_types.h>
-/*
+/**
* The rt_mutex structure
*
* @wait_lock: spinlock to protect the structure
#define DEFINE_RT_MUTEX(mutexname) \
struct rt_mutex mutexname = __RT_MUTEX_INITIALIZER(mutexname)
-/***
+/**
* rt_mutex_is_locked - is the mutex locked
* @lock: the mutex to be queried
*
SCTP_PARAM_ERR_CAUSE = __constant_htons(0xc003),
SCTP_PARAM_SET_PRIMARY = __constant_htons(0xc004),
SCTP_PARAM_SUCCESS_REPORT = __constant_htons(0xc005),
- SCTP_PARAM_ADAPTION_LAYER_IND = __constant_htons(0xc006),
+ SCTP_PARAM_ADAPTATION_LAYER_IND = __constant_htons(0xc006),
} sctp_param_t; /* enum */
sctp_paramhdr_t param_hdr;
} __attribute__((packed)) sctp_ecn_capable_param_t;
-/* ADDIP Section 3.2.6 Adaption Layer Indication */
-typedef struct sctp_adaption_ind_param {
+/* ADDIP Section 3.2.6 Adaptation Layer Indication */
+typedef struct sctp_adaptation_ind_param {
struct sctp_paramhdr param_hdr;
- __be32 adaption_ind;
-} __attribute__((packed)) sctp_adaption_ind_param_t;
+ __be32 adaptation_ind;
+} __attribute__((packed)) sctp_adaptation_ind_param_t;
/* RFC 2960. Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
* The INIT ACK chunk is used to acknowledge the initiation of an SCTP
* the data being transferred; that may reduce overhead, when the
* underlying driver uses dma.
*
- * If the transmit buffer is null, undefined data will be shifted out
+ * If the transmit buffer is null, zeroes will be shifted out
* while filling rx_buf. If the receive buffer is null, the data
* shifted in will be discarded. Only "len" bytes shift out (or in).
* It's an error to try to shift out a partial word. (For example, by
int flags, const struct rpc_call_ops *ops,
void *data);
void rpc_put_task(struct rpc_task *);
-void rpc_release_task(struct rpc_task *);
void rpc_exit_task(struct rpc_task *);
void rpc_release_calldata(const struct rpc_call_ops *, void *);
void rpc_killall_tasks(struct rpc_clnt *);
*
* Each request/reply pair can have at most one "payload", plus two pages,
* one for the request, and one for the reply.
+ * We using ->sendfile to return read data, we might need one extra page
+ * if the request is not page-aligned. So add another '1'.
*/
-#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE + 2)
+#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \
+ + 2 + 1)
static inline u32 svc_getnl(struct kvec *iov)
{
extern int valid_swaphandles(swp_entry_t, unsigned long *);
extern void swap_free(swp_entry_t);
extern void free_swap_and_cache(swp_entry_t);
-extern int swap_type_of(dev_t, sector_t);
+extern int swap_type_of(dev_t, sector_t, struct block_device **);
extern unsigned int count_swap_pages(int, int);
extern sector_t map_swap_page(struct swap_info_struct *, pgoff_t);
extern sector_t swapdev_block(int, pgoff_t);
init_timer(timer);
}
-/***
+/**
* timer_pending - is a timer pending?
* @timer: the timer in question
*
extern unsigned long next_timer_interrupt(void);
-/***
+/**
* add_timer - start a timer
* @timer: the timer to be added
*
#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000)
#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000)
+/* FIXME:
+ Although std_id is 64 bits, there is an issue on PPC32 architecture that
+ makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+ this value to 32 bits.
+ As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+ it should work fine. However, if needed to add more than two standards,
+ v4l2-common.c should be fixed.
+ */
+
/* some merged standards */
#define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC)
#define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B)
/*
* Light weight per cpu counter implementation.
*
- * Counters should only be incremented and no critical kernel component
- * should rely on the counter values.
+ * Counters should only be incremented. You need to set EMBEDDED
+ * to disable VM_EVENT_COUNTERS. Things like procps (vmstat,
+ * top, etc) use /proc/vmstat and depend on these counters.
*
* Counters are handled completely inline. On many platforms the code
* generated will simply be the increment of a global address.
}
extern void all_vm_events(unsigned long *);
+#ifdef CONFIG_HOTPLUG
extern void vm_events_fold_cpu(int cpu);
+#else
+static inline void vm_events_fold_cpu(int cpu)
+{
+}
+#endif
#else
enum v4l2_mpeg_audio_mode_extension audio_mode_extension;
enum v4l2_mpeg_audio_emphasis audio_emphasis;
enum v4l2_mpeg_audio_crc audio_crc;
- u8 audio_properties;
+ u16 audio_properties;
/* video */
enum v4l2_mpeg_video_encoding video_encoding;
#define _IR_COMMON
#include <linux/input.h>
+#include <linux/workqueue.h>
#define IR_TYPE_RC5 1
#define IR_TYPE_PD 2 /* Pulse distance encoded IR */
extern ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
extern void ax25_send_to_raw(ax25_address *, struct sk_buff *, int);
extern void ax25_destroy_socket(ax25_cb *);
-extern ax25_cb *ax25_create_cb(void);
+extern ax25_cb * __must_check ax25_create_cb(void);
extern void ax25_fillin_cb(ax25_cb *, ax25_dev *);
extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
extern void ax25_ds_idletimer_expiry(ax25_cb *);
/* ax25_iface.c */
-extern int ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *));
+
+struct ax25_protocol {
+ struct ax25_protocol *next;
+ unsigned int pid;
+ int (*func)(struct sk_buff *, ax25_cb *);
+};
+
+extern void ax25_register_pid(struct ax25_protocol *ap);
extern void ax25_protocol_release(unsigned int);
-extern int ax25_linkfail_register(void (*)(ax25_cb *, int));
-extern void ax25_linkfail_release(void (*)(ax25_cb *, int));
-extern int ax25_listen_register(ax25_address *, struct net_device *);
+
+struct ax25_linkfail {
+ struct hlist_node lf_node;
+ void (*func)(ax25_cb *, int);
+};
+
+extern void ax25_linkfail_register(struct ax25_linkfail *lf);
+extern void ax25_linkfail_release(struct ax25_linkfail *lf);
+extern int __must_check ax25_listen_register(ax25_address *,
+ struct net_device *);
extern void ax25_listen_release(ax25_address *, struct net_device *);
extern int (*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *);
extern int ax25_listen_mine(ax25_address *, struct net_device *);
/* ax25_uid.c */
extern int ax25_uid_policy;
extern ax25_uid_assoc *ax25_findbyuid(uid_t);
-extern int ax25_uid_ioctl(int, struct sockaddr_ax25 *);
+extern int __must_check ax25_uid_ioctl(int, struct sockaddr_ax25 *);
extern struct file_operations ax25_uid_fops;
extern void ax25_uid_free(void);
#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
+#define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
-extern int inet6_csk_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok);
+extern int inet6_csk_xmit(struct sk_buff *skb, int ipfragok);
#endif /* _INET6_CONNECTION_SOCK_H */
* (i.e. things that depend on the address family)
*/
struct inet_connection_sock_af_ops {
- int (*queue_xmit)(struct sk_buff *skb, struct sock *sk,
- int ipfragok);
+ int (*queue_xmit)(struct sk_buff *skb, int ipfragok);
void (*send_check)(struct sock *sk, int len,
struct sk_buff *skb);
int (*rebuild_header)(struct sock *sk);
extern int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
extern int ip_do_nat(struct sk_buff *skb);
extern void ip_send_check(struct iphdr *ip);
-extern int ip_queue_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok);
+extern int ip_queue_xmit(struct sk_buff *skb, int ipfragok);
extern void ip_init(void);
extern int ip_append_data(struct sock *sk,
int getfrag(void *from, char *to, int offset, int len,
carry = (sum < uproto);
sum += carry;
- return csum_fold((__force __wsum)csum);
+ return csum_fold((__force __wsum)sum);
}
#endif
#if defined(CONFIG_IP_NF_CONNTRACK) || defined(CONFIG_IP_NF_CONNTRACK_MODULE)
#include <linux/netfilter_ipv4/ip_conntrack.h>
+#include <linux/socket.h>
#ifdef CONFIG_IP_NF_CONNTRACK_MARK
static inline u_int32_t *nf_ct_get_mark(const struct sk_buff *skb,
extern void rose_enquiry_response(struct sock *);
/* rose_route.c */
-extern struct rose_neigh *rose_loopback_neigh;
+extern struct rose_neigh rose_loopback_neigh;
extern struct file_operations rose_neigh_fops;
extern struct file_operations rose_nodes_fops;
extern struct file_operations rose_routes_fops;
-extern int rose_add_loopback_neigh(void);
-extern int rose_add_loopback_node(rose_address *);
+extern void rose_add_loopback_neigh(void);
+extern int __must_check rose_add_loopback_node(rose_address *);
extern void rose_del_loopback_node(rose_address *);
extern void rose_rt_device_down(struct net_device *);
extern void rose_link_device_down(struct net_device *);
int flags);
extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family);
extern int sctp_register_pf(struct sctp_pf *, sa_family_t);
-int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
- void *ptr);
/*
* sctp/socket.c
sctp_state_fn_t sctp_sf_discard_chunk;
sctp_state_fn_t sctp_sf_do_5_2_1_siminit;
sctp_state_fn_t sctp_sf_do_5_2_2_dupinit;
+sctp_state_fn_t sctp_sf_do_5_2_3_initack;
sctp_state_fn_t sctp_sf_do_5_2_4_dupcook;
sctp_state_fn_t sctp_sf_unk_chunk;
sctp_state_fn_t sctp_sf_do_8_5_1_E_sa;
__u8 disable_fragments;
__u8 pd_mode;
__u8 v4mapped;
- __u32 adaption_ind;
+ __u32 adaptation_ind;
/* Receive to here while partial delivery is in effect. */
struct sk_buff_head pd_lobby;
/* Padding for future use */
__u8 padding;
- __u32 adaption_ind;
+ __u32 adaptation_ind;
/* This is a shim for my peer's INIT packet, followed by
struct sctp_ipv4addr_param *v4;
struct sctp_ipv6addr_param *v6;
union sctp_addr_param *addr;
- struct sctp_adaption_ind_param *aind;
+ struct sctp_adaptation_ind_param *aind;
};
/* RFC 2960. Section 3.3.5 Heartbeat.
__u8 asconf_capable; /* Does peer support ADDIP? */
__u8 prsctp_capable; /* Can peer do PR-SCTP? */
- __u32 adaption_ind; /* Adaption Code point. */
+ __u32 adaptation_ind; /* Adaptation Code point. */
/* This mask is used to disable sending the ASCONF chunk
* with specified parameter to peer.
const struct sctp_association *asoc,
__u32 indication, gfp_t gfp);
-struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication(
+struct sctp_ulpevent *sctp_ulpevent_make_adaptation_indication(
const struct sctp_association *asoc, gfp_t gfp);
struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc,
#define SCTP_SET_PEER_PRIMARY_ADDR SCTP_SET_PEER_PRIMARY_ADDR
SCTP_PRIMARY_ADDR,
#define SCTP_PRIMARY_ADDR SCTP_PRIMARY_ADDR
- SCTP_ADAPTION_LAYER,
-#define SCTP_ADAPTION_LAYER SCTP_ADAPTION_LAYER
+ SCTP_ADAPTATION_LAYER,
+#define SCTP_ADAPTATION_LAYER SCTP_ADAPTATION_LAYER
SCTP_DISABLE_FRAGMENTS,
#define SCTP_DISABLE_FRAGMENTS SCTP_DISABLE_FRAGMENTS
SCTP_PEER_ADDR_PARAMS,
};
/*
- * 5.3.1.6 SCTP_ADAPTION_INDICATION
+ * 5.3.1.6 SCTP_ADAPTATION_INDICATION
*
- * When a peer sends a Adaption Layer Indication parameter , SCTP
+ * When a peer sends a Adaptation Layer Indication parameter , SCTP
* delivers this notification to inform the application
- * that of the peers requested adaption layer.
+ * that of the peers requested adaptation layer.
*/
-struct sctp_adaption_event {
+struct sctp_adaptation_event {
__u16 sai_type;
__u16 sai_flags;
__u32 sai_length;
- __u32 sai_adaption_ind;
+ __u32 sai_adaptation_ind;
sctp_assoc_t sai_assoc_id;
};
__u8 sctp_peer_error_event;
__u8 sctp_shutdown_event;
__u8 sctp_partial_delivery_event;
- __u8 sctp_adaption_layer_event;
+ __u8 sctp_adaptation_layer_event;
};
/*
struct sctp_remote_error sn_remote_error;
struct sctp_send_failed sn_send_failed;
struct sctp_shutdown_event sn_shutdown_event;
- struct sctp_adaption_event sn_adaption_event;
+ struct sctp_adaptation_event sn_adaptation_event;
struct sctp_pdapi_event sn_pdapi_event;
};
SCTP_REMOTE_ERROR,
SCTP_SHUTDOWN_EVENT,
SCTP_PARTIAL_DELIVERY_EVENT,
- SCTP_ADAPTION_INDICATION,
+ SCTP_ADAPTATION_INDICATION,
};
/* Notification error codes used to fill up the error fields in some
} __attribute__((packed, aligned(4)));
/*
- * 7.1.11 Set Adaption Layer Indicator (SCTP_ADAPTION_LAYER)
+ * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER)
*
- * Requests that the local endpoint set the specified Adaption Layer
+ * Requests that the local endpoint set the specified Adaptation Layer
* Indication parameter for all future INIT and INIT-ACK exchanges.
*/
-struct sctp_setadaption {
- __u32 ssb_adaption_ind;
+struct sctp_setadaptation {
+ __u32 ssb_adaptation_ind;
};
/*
{
return (__s32)(seq1-seq2) < 0;
}
-
-static inline int after(__u32 seq1, __u32 seq2)
-{
- return (__s32)(seq2-seq1) < 0;
-}
-
+#define after(seq2, seq1) before(seq1, seq2)
/* is s2<=s1<=s3 ? */
static inline int between(__u32 seq1, __u32 seq2, __u32 seq3)
extern void x25_disconnect(struct sock *, int, unsigned char, unsigned char);
/* x25_timer.c */
+extern void x25_init_timers(struct sock *sk);
extern void x25_start_heartbeat(struct sock *);
extern void x25_start_t2timer(struct sock *);
extern void x25_start_t21timer(struct sock *);
int shutdown; /* this card is going down */
int free_on_last_close; /* free in context of file_release */
wait_queue_head_t shutdown_sleep;
- struct device *parent;
- struct device *dev;
+ struct device *dev; /* device assigned to this card */
+#ifndef CONFIG_SYSFS_DEPRECATED
+ struct device *card_dev; /* cardX object for sysfs */
+#endif
#ifdef CONFIG_PM
unsigned int power_state; /* power state */
struct device *dev; /* device for sysfs */
};
+/* return a device pointer linked to each sound device as a parent */
+static inline struct device *snd_card_get_device_link(struct snd_card *card)
+{
+#ifdef CONFIG_SYSFS_DEPRECATED
+ return card ? card->dev : NULL;
+#else
+ return card ? card->card_dev : NULL;
+#endif
+}
+
/* sound.c */
extern int snd_major;
int snd_card_file_remove(struct snd_card *card, struct file *file);
#ifndef snd_card_set_dev
-#define snd_card_set_dev(card,devptr) ((card)->parent = (devptr))
+#define snd_card_set_dev(card,devptr) ((card)->dev = (devptr))
#endif
/* device.c */
size_t mmap_bytes;
char *buffer; /* vmallocated period */
size_t buffer_used; /* used length from period buffer */
+ struct mutex params_lock;
#ifdef CONFIG_SND_PCM_OSS_PLUGINS
struct snd_pcm_plugin *plugin_first;
struct snd_pcm_plugin *plugin_last;
/* include/version.h. Generated by alsa/ksync script. */
-#define CONFIG_SND_VERSION "1.0.13"
-#define CONFIG_SND_DATE " (Tue Nov 28 14:07:24 2006 UTC)"
+#define CONFIG_SND_VERSION "1.0.14rc1"
+#define CONFIG_SND_DATE " (Tue Jan 09 09:56:17 2007 UTC)"
int irq;
unsigned int device_id; /* PCI device ID */
- unsigned int rev; /* PCI revision */
+ unsigned char rev; /* PCI revision */
unsigned long reg_area_phys;
void __iomem *reg_area_virt;
struct resource *res_reg_area;
struct snd_kcontrol *spdif_pcm_ctl;
int mode_dup4ch;
int rear_opened;
- int rear_swap;
int spdif_opened;
struct {
u16 left;
int snd_ymfpci_pcm2(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
int snd_ymfpci_pcm_spdif(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
int snd_ymfpci_pcm_4ch(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
-int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch, int rear_swap);
+int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch);
int snd_ymfpci_timer(struct snd_ymfpci *chip, int device);
#endif /* __SOUND_YMFPCI_H */
config SLAB
default y
- bool "Use full SLAB allocator" if EMBEDDED
+ bool "Use full SLAB allocator" if (EMBEDDED && !SMP && !SPARSEMEM)
help
Disabling this replaces the advanced SLAB allocator and
kmalloc support with the drastically simpler SLOB allocator.
default y
bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
help
- VM event counters are only needed to for event counts to be
- shown. They have no function for the kernel itself. This
- option allows the disabling of the VM event counters.
- /proc/vmstat will only show page counts.
+ VM event counters are needed for event counts to be shown.
+ This option allows the disabling of the VM event counters
+ on EMBEDDED systems. /proc/vmstat will only show page counts
+ if VM event counters are disabled.
endmenu # General setup
# dependencies on generated files need to be listed explicitly
-$(obj)/main.o: include/linux/compile.h
$(obj)/version.o: include/linux/compile.h
# compile.h changes depending on hostname, generation number, etc,
#include <linux/buffer_head.h>
#include <linux/debug_locks.h>
#include <linux/lockdep.h>
-#include <linux/utsrelease.h>
#include <linux/pid_namespace.h>
-#include <linux/compile.h>
+#include <linux/device.h>
#include <asm/io.h>
#include <asm/bugs.h>
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
-extern void driver_init(void);
extern void prepare_namespace(void);
#ifdef CONFIG_ACPI
extern void acpi_early_init(void);
{
}
-static const char linux_banner[] =
- "Linux version " UTS_RELEASE
- " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")"
- " (" LINUX_COMPILER ")"
- " " UTS_VERSION "\n";
-
asmlinkage void __init start_kernel(void)
{
char * command_line;
parse_args("Booting kernel", command_line, __start___param,
__stop___param - __start___param,
&unknown_bootoption);
+ if (!irqs_disabled()) {
+ printk(KERN_WARNING "start_kernel(): bug: interrupts were "
+ "enabled *very* early, fixing it\n");
+ local_irq_disable();
+ }
sort_main_extable();
trap_init();
rcu_init();
do_initcalls();
}
-static void do_pre_smp_initcalls(void)
+static void __init do_pre_smp_initcalls(void)
{
extern int spawn_ksoftirqd(void);
#ifdef CONFIG_SMP
},
};
EXPORT_SYMBOL_GPL(init_uts_ns);
+
+/* FIXED STRINGS! Don't touch! */
+const char linux_banner[] =
+ "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
+ LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
+
+const char linux_proc_banner[] =
+ "%s version %s"
+ " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")"
+ " (" LINUX_COMPILER ") %s\n";
if (size < SHMMIN || size > ns->shm_ctlmax)
return -EINVAL;
- if (ns->shm_tot + numpages >= ns->shm_ctlall)
+ if (ns->shm_tot + numpages > ns->shm_ctlall)
return -ENOSPC;
shp = ipc_rcu_alloc(sizeof(*shp));
/* our own copy of se_str */
se_str = kstrdup(sf->se_str, GFP_KERNEL);
- if (unlikely(IS_ERR(se_str)))
- return -ENOMEM;
+ if (unlikely(!se_str))
+ return -ENOMEM;
df->se_str = se_str;
/* our own (refreshed) copy of se_rule */
#endif /*CONFIG_HOTPLUG_CPU*/
/* Requires cpu_add_remove_lock to be held */
-static int __devinit _cpu_up(unsigned int cpu)
+static int __cpuinit _cpu_up(unsigned int cpu)
{
int ret;
void *hcpu = (void *)(long)cpu;
return ret;
}
-int __devinit cpu_up(unsigned int cpu)
+int __cpuinit cpu_up(unsigned int cpu)
{
int err = 0;
int disable_nonboot_cpus(void)
{
- int cpu, first_cpu, error;
+ int cpu, first_cpu, error = 0;
mutex_lock(&cpu_add_remove_lock);
first_cpu = first_cpu(cpu_present_map);
/* Make sure the CPUs won't be enabled by someone else */
cpu_hotplug_disabled = 1;
} else {
- printk(KERN_ERR "Non-boot CPUs are not disabled");
+ printk(KERN_ERR "Non-boot CPUs are not disabled\n");
}
out:
mutex_unlock(&cpu_add_remove_lock);
return single_open(file, proc_cpuset_show, pid);
}
-const struct file_operations proc_cpuset_operations = {
+struct file_operations proc_cpuset_operations = {
.open = cpuset_open,
.read = seq_read,
.llseek = seq_lseek,
current->fs = fs;
atomic_inc(&fs->count);
- exit_task_namespaces(current);
+ put_and_finalize_nsproxy(current->nsproxy);
current->nsproxy = init_task.nsproxy;
get_task_namespaces(current);
fdt = files_fdtable(files);
if (fdt != &files->fdtab)
kmem_cache_free(files_cachep, files);
- call_rcu(&fdt->rcu, free_fdtable_rcu);
+ free_fdtable(fdt);
}
}
static void
reparent_thread(struct task_struct *p, struct task_struct *father, int traced)
{
- /* We don't want people slaying init. */
- if (p->exit_signal != -1)
- p->exit_signal = SIGCHLD;
-
if (p->pdeath_signal)
/* We already hold the tasklist_lock here. */
group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p);
p->parent = p->real_parent;
add_parent(p);
- /* If we'd notified the old parent about this child's death,
- * also notify the new parent.
- */
- if (p->exit_state == EXIT_ZOMBIE && p->exit_signal != -1 &&
- thread_group_empty(p))
- do_notify_parent(p, p->exit_signal);
- else if (p->state == TASK_TRACED) {
+ if (p->state == TASK_TRACED) {
/*
* If it was at a trace stop, turn it into
* a normal stop since it's no longer being
}
}
+ /* If this is a threaded reparent there is no need to
+ * notify anyone anything has happened.
+ */
+ if (p->real_parent->group_leader == father->group_leader)
+ return;
+
+ /* We don't want people slaying init. */
+ if (p->exit_signal != -1)
+ p->exit_signal = SIGCHLD;
+
+ /* If we'd notified the old parent about this child's death,
+ * also notify the new parent.
+ */
+ if (!traced && p->exit_state == EXIT_ZOMBIE &&
+ p->exit_signal != -1 && thread_group_empty(p))
+ do_notify_parent(p, p->exit_signal);
+
/*
* process group orphan check
* Case ii: Our child is in a different pgrp
fastcall NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
+ struct nsproxy *ns;
int group_dead;
profile_task_exit(tsk);
tsk->exit_code = code;
proc_exit_connector(tsk);
+ ns = preexit_task_namespaces(tsk);
exit_notify(tsk);
- exit_task_namespaces(tsk);
+ exit_task_namespaces(tsk, ns);
#ifdef CONFIG_NUMA
mpol_free(tsk->mempolicy);
tsk->mempolicy = NULL;
return p;
bad_fork_cleanup_namespaces:
- exit_task_namespaces(p);
+ put_and_finalize_nsproxy(p->nsproxy);
bad_fork_cleanup_keys:
exit_keys(p);
bad_fork_cleanup_mm:
}
if (new_nsproxy)
- put_nsproxy(new_nsproxy);
+ put_and_finalize_nsproxy(new_nsproxy);
bad_unshare_cleanup_ipc:
if (new_ipc)
if (!handle)
handle = handle_bad_irq;
-
- if (desc->chip == &no_irq_chip) {
+ else if (desc->chip == &no_irq_chip) {
printk(KERN_WARNING "Trying to install %sinterrupt handler "
- "for IRQ%d\n", is_chained ? "chained " : " ", irq);
+ "for IRQ%d\n", is_chained ? "chained " : "", irq);
/*
* Some ARM implementations install a handler for really dumb
* interrupt hardware without setting an irq_chip. This worked
/* Undo nested disables: */
desc->depth = 1;
}
+ /* Reset broken irq detection when installing new handler */
+ desc->irq_count = 0;
+ desc->irqs_unhandled = 0;
spin_unlock_irqrestore(&desc->lock, flags);
new->irq = irq;
int noirqdebug __read_mostly;
-int __init noirqdebug_setup(char *str)
+int noirqdebug_setup(char *str)
{
noirqdebug = 1;
printk(KERN_INFO "IRQ lockup detection disabled\n");
cache_hit:
debug_atomic_inc(&chain_lookup_hits);
if (very_verbose(class))
- printk("\nhash chain already cached, key: %016Lx tail class: [%p] %s\n", chain_key, class->key, class->name);
+ printk("\nhash chain already cached, key: "
+ "%016Lx tail class: [%p] %s\n",
+ (unsigned long long)chain_key,
+ class->key, class->name);
return 0;
}
}
if (very_verbose(class))
- printk("\nnew hash chain, key: %016Lx tail class: [%p] %s\n", chain_key, class->key, class->name);
+ printk("\nnew hash chain, key: %016Lx tail class: [%p] %s\n",
+ (unsigned long long)chain_key, class->key, class->name);
/*
* Allocate a new chain entry from the static array, and add
* it to the hash:
goto out;
mod->drivers_dir = kobject_add_dir(&mod->mkobj.kobj, "drivers");
- if (!mod->drivers_dir)
+ if (!mod->drivers_dir) {
+ err = -ENOMEM;
goto out_unreg;
+ }
err = module_param_sysfs_setup(mod, kparam, num_params);
if (err)
kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
return 0;
-out_unreg_drivers:
- kobject_unregister(mod->drivers_dir);
out_unreg_param:
module_param_sysfs_remove(mod);
+out_unreg_drivers:
+ kobject_unregister(mod->drivers_dir);
out_unreg:
kobject_del(&mod->mkobj.kobj);
kobject_put(&mod->mkobj.kobj);
printk("\n");
}
+static char *make_driver_name(struct device_driver *drv)
+{
+ char *driver_name;
+
+ driver_name = kmalloc(strlen(drv->name) + strlen(drv->bus->name) + 2,
+ GFP_KERNEL);
+ if (!driver_name)
+ return NULL;
+
+ sprintf(driver_name, "%s:%s", drv->bus->name, drv->name);
+ return driver_name;
+}
+
void module_add_driver(struct module *mod, struct device_driver *drv)
{
+ char *driver_name;
int no_warn;
if (!mod || !drv)
/* Don't check return codes; these calls are idempotent */
no_warn = sysfs_create_link(&drv->kobj, &mod->mkobj.kobj, "module");
- no_warn = sysfs_create_link(mod->drivers_dir, &drv->kobj, drv->name);
+ driver_name = make_driver_name(drv);
+ if (driver_name) {
+ no_warn = sysfs_create_link(mod->drivers_dir, &drv->kobj,
+ driver_name);
+ kfree(driver_name);
+ }
}
EXPORT_SYMBOL(module_add_driver);
void module_remove_driver(struct device_driver *drv)
{
+ char *driver_name;
+
if (!drv)
return;
+
sysfs_remove_link(&drv->kobj, "module");
- if (drv->owner && drv->owner->drivers_dir)
- sysfs_remove_link(drv->owner->drivers_dir, drv->name);
+ if (drv->owner && drv->owner->drivers_dir) {
+ driver_name = make_driver_name(drv);
+ if (driver_name) {
+ sysfs_remove_link(drv->owner->drivers_dir,
+ driver_name);
+ kfree(driver_name);
+ }
+ }
}
EXPORT_SYMBOL(module_remove_driver);
goto out_pid;
out:
- put_nsproxy(old_ns);
+ put_and_finalize_nsproxy(old_ns);
return err;
out_pid:
goto out;
}
+struct nsproxy *put_nsproxy(struct nsproxy *ns)
+{
+ if (ns) {
+ if (atomic_dec_and_test(&ns->count)) {
+ if (ns->mnt_ns) {
+ put_mnt_ns(ns->mnt_ns);
+ ns->mnt_ns = NULL;
+ }
+ return ns;
+ }
+ }
+ return NULL;
+}
+
void free_nsproxy(struct nsproxy *ns)
{
if (ns->mnt_ns)
while (*args) {
int ret;
+ int irq_was_disabled;
args = next_arg(args, ¶m, &val);
+ irq_was_disabled = irqs_disabled();
ret = parse_one(param, val, params, num, unknown);
+ if (irq_was_disabled && !irqs_disabled()) {
+ printk(KERN_WARNING "parse_args(): option '%s' enabled "
+ "irq's!\n", param);
+ }
switch (ret) {
case -ENOENT:
printk(KERN_ERR "%s: Unknown parameter `%s'\n",
{
switch(mode) {
case PM_DISK_PLATFORM:
- kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
- pm_ops->enter(PM_SUSPEND_DISK);
- break;
+ if (pm_ops && pm_ops->enter) {
+ kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
+ pm_ops->enter(PM_SUSPEND_DISK);
+ break;
+ }
case PM_DISK_SHUTDOWN:
kernel_power_off();
break;
DEFINE_MUTEX(pm_mutex);
struct pm_ops *pm_ops;
-suspend_disk_method_t pm_disk_mode = PM_DISK_SHUTDOWN;
+suspend_disk_method_t pm_disk_mode = PM_DISK_PLATFORM;
/**
* pm_set_ops - Set the global power method table.
{
int res;
- res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
+ res = swap_type_of(swsusp_resume_device, swsusp_resume_block,
+ &resume_bdev);
if (res < 0)
return res;
root_swap = res;
- resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE);
- if (IS_ERR(resume_bdev))
- return PTR_ERR(resume_bdev);
+ res = blkdev_get(resume_bdev, FMODE_WRITE, O_RDWR);
+ if (res)
+ return res;
res = set_blocksize(resume_bdev, PAGE_SIZE);
if (res < 0)
memset(&data->handle, 0, sizeof(struct snapshot_handle));
if ((filp->f_flags & O_ACCMODE) == O_RDONLY) {
data->swap = swsusp_resume_device ?
- swap_type_of(swsusp_resume_device, 0) : -1;
+ swap_type_of(swsusp_resume_device, 0, NULL) : -1;
data->mode = O_RDONLY;
} else {
data->swap = -1;
* so we need to recode them
*/
if (old_decode_dev(arg)) {
- data->swap = swap_type_of(old_decode_dev(arg), 0);
+ data->swap = swap_type_of(old_decode_dev(arg),
+ 0, NULL);
if (data->swap < 0)
error = -ENODEV;
} else {
swdev = old_decode_dev(swap_area.dev);
if (swdev) {
offset = swap_area.offset;
- data->swap = swap_type_of(swdev, offset);
+ data->swap = swap_type_of(swdev, offset, NULL);
if (data->swap < 0)
error = -ENODEV;
} else {
static int __read_mostly ignore_loglevel;
-int __init ignore_loglevel_setup(char *str)
+static int __init ignore_loglevel_setup(char *str)
{
ignore_loglevel = 1;
printk(KERN_INFO "debug: ignoring loglevel setting.\n");
static atomic_t *prof_buffer;
static unsigned long prof_len, prof_shift;
+
int prof_on __read_mostly;
+EXPORT_SYMBOL_GPL(prof_on);
+
static cpumask_t prof_cpu_mask = CPU_MASK_ALL;
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct profile_hit *[2], cpu_profile_hits);
{
static char __initdata schedstr[] = "schedule";
static char __initdata sleepstr[] = "sleep";
+ static char __initdata kvmstr[] = "kvm";
int par;
if (!strncmp(str, sleepstr, strlen(sleepstr))) {
printk(KERN_INFO
"kernel sleep profiling enabled (shift: %ld)\n",
prof_shift);
- } else if (!strncmp(str, sleepstr, strlen(sleepstr))) {
+ } else if (!strncmp(str, schedstr, strlen(schedstr))) {
prof_on = SCHED_PROFILING;
if (str[strlen(schedstr)] == ',')
str += strlen(schedstr) + 1;
printk(KERN_INFO
"kernel schedule profiling enabled (shift: %ld)\n",
prof_shift);
+ } else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
+ prof_on = KVM_PROFILING;
+ if (str[strlen(kvmstr)] == ',')
+ str += strlen(kvmstr) + 1;
+ if (get_option(&str, &par))
+ prof_shift = par;
+ printk(KERN_INFO
+ "kernel KVM profiling enabled (shift: %ld)\n",
+ prof_shift);
} else if (get_option(&str, &par)) {
prof_shift = par;
prof_on = CPU_PROFILING;
}
#endif /* !CONFIG_SMP */
+EXPORT_SYMBOL_GPL(profile_hits);
+
void profile_tick(int type)
{
struct pt_regs *regs = get_irq_regs();
VERBOSE_PRINTK_STRING("rcu_torture_writer task started");
set_user_nice(current, 19);
+ current->flags |= PF_NOFREEZE;
do {
schedule_timeout_uninterruptible(1);
VERBOSE_PRINTK_STRING("rcu_torture_fakewriter task started");
set_user_nice(current, 19);
+ current->flags |= PF_NOFREEZE;
do {
schedule_timeout_uninterruptible(1 + rcu_random(&rand)%10);
VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
set_user_nice(current, 19);
+ current->flags |= PF_NOFREEZE;
do {
idx = cur_ops->readlock();
/**
* wakeup_readers - wake up readers waiting on a channel
- * @private: the channel buffer
+ * @work: work struct that contains the the channel buffer
*
* This is the work function used to defer reader waking. The
* reason waking is deferred is that calling directly from write
*
* See relay_reset for description of effect.
*/
-static inline void __relay_reset(struct rchan_buf *buf, unsigned int init)
+static void __relay_reset(struct rchan_buf *buf, unsigned int init)
{
size_t i;
* The channel buffer and channel buffer data structure are then freed
* automatically when the last reference is given up.
*/
-static inline void relay_close_buf(struct rchan_buf *buf)
+static void relay_close_buf(struct rchan_buf *buf)
{
buf->finalized = 1;
cancel_delayed_work(&buf->wake_readers);
kref_put(&buf->kref, relay_remove_buf);
}
-static inline void setup_callbacks(struct rchan *chan,
+static void setup_callbacks(struct rchan *chan,
struct rchan_callbacks *cb)
{
if (!cb) {
/*
* relay_file_read_subbufs - read count bytes, bridging subbuf boundaries
*/
-static inline ssize_t relay_file_read_subbufs(struct file *filp,
- loff_t *ppos,
- subbuf_actor_t subbuf_actor,
- read_actor_t actor,
- read_descriptor_t *desc)
+static ssize_t relay_file_read_subbufs(struct file *filp, loff_t *ppos,
+ subbuf_actor_t subbuf_actor,
+ read_actor_t actor,
+ read_descriptor_t *desc)
{
struct rchan_buf *buf = filp->private_data;
size_t read_start, avail;
return try_to_wake_up(p, state, 0);
}
+static void task_running_tick(struct rq *rq, struct task_struct *p);
/*
* Perform scheduler related setup for a newly forked process p.
* p is forked by current.
* runqueue lock is not a problem.
*/
current->time_slice = 1;
- scheduler_tick();
+ task_running_tick(cpu_rq(cpu), current);
}
local_irq_enable();
put_cpu();
return 0;
}
-static inline int __resched_legal(int expected_preempt_count)
-{
- if (unlikely(preempt_count() != expected_preempt_count))
- return 0;
- if (unlikely(system_state != SYSTEM_RUNNING))
- return 0;
- return 1;
-}
-
static void __cond_resched(void)
{
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
int __sched cond_resched(void)
{
- if (need_resched() && __resched_legal(0)) {
+ if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
+ system_state == SYSTEM_RUNNING) {
__cond_resched();
return 1;
}
ret = 1;
spin_lock(lock);
}
- if (need_resched() && __resched_legal(1)) {
+ if (need_resched() && system_state == SYSTEM_RUNNING) {
spin_release(&lock->dep_map, 1, _THIS_IP_);
_raw_spin_unlock(lock);
preempt_enable_no_resched();
{
BUG_ON(!in_softirq());
- if (need_resched() && __resched_legal(0)) {
+ if (need_resched() && system_state == SYSTEM_RUNNING) {
raw_local_irq_disable();
_local_bh_enable();
raw_local_irq_enable();
}
/* cpus with isolated domains */
-static cpumask_t __cpuinitdata cpu_isolated_map = CPU_MASK_NONE;
+static cpumask_t cpu_isolated_map = CPU_MASK_NONE;
/* Setup the mask of cpus configured for isolated domains */
static int __init isolated_cpu_setup(char *str)
lock_cpu_hotplug();
arch_init_sched_domains(&cpu_online_map);
- cpus_andnot(non_isolated_cpus, cpu_online_map, cpu_isolated_map);
+ cpus_andnot(non_isolated_cpus, cpu_possible_map, cpu_isolated_map);
if (cpus_empty(non_isolated_cpus))
cpu_set(smp_processor_id(), non_isolated_cpus);
unlock_cpu_hotplug();
int blocking_notifier_call_chain(struct blocking_notifier_head *nh,
unsigned long val, void *v)
{
- int ret;
+ int ret = NOTIFY_DONE;
- down_read(&nh->rwsem);
- ret = notifier_call_chain(&nh->head, val, v);
- up_read(&nh->rwsem);
+ /*
+ * We check the head outside the lock, but if this access is
+ * racy then it does not matter what the result of the test
+ * is, we re-check the list after having taken the lock anyway:
+ */
+ if (rcu_dereference(nh->head)) {
+ down_read(&nh->rwsem);
+ ret = notifier_call_chain(&nh->head, val, v);
+ up_read(&nh->rwsem);
+ }
return ret;
}
* should never happens anyway). You just have the printk()
* that will tell you if something is gone wrong and where.
*/
- if (timeout < 0)
- {
+ if (timeout < 0) {
printk(KERN_ERR "schedule_timeout: wrong timeout "
- "value %lx from %p\n", timeout,
- __builtin_return_address(0));
+ "value %lx\n", timeout);
+ dump_stack();
current->state = TASK_RUNNING;
goto out;
}
/**
* queue_delayed_work - queue work on a workqueue after delay
* @wq: workqueue to use
- * @work: delayable work to queue
+ * @dwork: delayable work to queue
* @delay: number of jiffies to wait before queueing
*
* Returns 0 if @work was already on a queue, non-zero otherwise.
* queue_delayed_work_on - queue work on specific CPU after delay
* @cpu: CPU number to execute work on
* @wq: workqueue to use
- * @work: work to queue
+ * @dwork: work to queue
* @delay: number of jiffies to wait before queueing
*
* Returns 0 if @work was already on a queue, non-zero otherwise.
mutex_lock(&workqueue_mutex);
for_each_online_cpu(cpu) {
- INIT_WORK(per_cpu_ptr(works, cpu), func);
- __queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu),
- per_cpu_ptr(works, cpu));
+ struct work_struct *work = per_cpu_ptr(works, cpu);
+
+ INIT_WORK(work, func);
+ set_bit(WORK_STRUCT_PENDING, work_data_bits(work));
+ __queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu), work);
}
mutex_unlock(&workqueue_mutex);
flush_workqueue(keventd_wq);
* @action: action that is happening (usually KOBJ_MOVE)
* @kobj: struct kobject that the action is happening to
* @envp_ext: pointer to environmental data
+ *
+ * Returns 0 if kobject_uevent() is completed with success or the
+ * corresponding error when it fails.
*/
-void kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
+int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp_ext[])
{
char **envp;
u64 seq;
char *seq_buff;
int i = 0;
- int retval;
+ int retval = 0;
int j;
pr_debug("%s\n", __FUNCTION__);
action_string = action_to_string(action);
- if (!action_string)
- return;
+ if (!action_string) {
+ pr_debug("kobject attempted to send uevent without action_string!\n");
+ return -EINVAL;
+ }
/* search the kset we belong to */
top_kobj = kobj;
top_kobj = top_kobj->parent;
} while (!top_kobj->kset && top_kobj->parent);
}
- if (!top_kobj->kset)
- return;
+ if (!top_kobj->kset) {
+ pr_debug("kobject attempted to send uevent without kset!\n");
+ return -EINVAL;
+ }
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
- if (!uevent_ops->filter(kset, kobj))
- return;
+ if (!uevent_ops->filter(kset, kobj)) {
+ pr_debug("kobject filter function caused the event to drop!\n");
+ return 0;
+ }
/* environment index */
envp = kzalloc(NUM_ENVP * sizeof (char *), GFP_KERNEL);
if (!envp)
- return;
+ return -ENOMEM;
/* environment values */
buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL);
- if (!buffer)
+ if (!buffer) {
+ retval = -ENOMEM;
goto exit;
+ }
/* complete object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
- if (!devpath)
+ if (!devpath) {
+ retval = -ENOENT;
goto exit;
+ }
/* originating subsystem */
if (uevent_ops && uevent_ops->name)
kfree(devpath);
kfree(buffer);
kfree(envp);
- return;
+ return retval;
}
EXPORT_SYMBOL_GPL(kobject_uevent_env);
*
* @action: action that is happening (usually KOBJ_ADD and KOBJ_REMOVE)
* @kobj: struct kobject that the action is happening to
+ *
+ * Returns 0 if kobject_uevent() is completed with success or the
+ * corresponding error when it fails.
*/
-void kobject_uevent(struct kobject *kobj, enum kobject_action action)
+int kobject_uevent(struct kobject *kobj, enum kobject_action action)
{
- kobject_uevent_env(kobj, action, NULL);
+ return kobject_uevent_env(kobj, action, NULL);
}
EXPORT_SYMBOL_GPL(kobject_uevent);
WARN_ON(release == NULL);
WARN_ON(release == (void (*)(struct kref *))kfree);
- /*
- * if current count is one, we are the last user and can release object
- * right now, avoiding an atomic operation on 'refcount'
- */
- if ((atomic_read(&kref->refcount) == 1) ||
- (atomic_dec_and_test(&kref->refcount))) {
+ if (atomic_dec_and_test(&kref->refcount)) {
release(kref);
return 1;
}
if (!bio)
return;
+ blk_add_trace_bio(q, *bio_orig, BLK_TA_BOUNCE);
+
/*
* at least one page was bounced, fill in possible non-highmem
* pages
pool = isa_page_pool;
}
- blk_add_trace_bio(q, *bio_orig, BLK_TA_BOUNCE);
-
/*
* slow path
*/
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
- page = ZERO_PAGE(address);
+ page = ZERO_PAGE(0);
pte = page_check_address(page, mm, address, &ptl);
if (pte) {
/* Nuke the page table entry. */
flush_cache_page(vma, address, pte_pfn(*pte));
pteval = ptep_clear_flush(vma, address, pte);
- page_remove_rmap(page);
+ page_remove_rmap(page, vma);
dec_mm_counter(mm, file_rss);
BUG_ON(pte_dirty(pteval));
pte_unmap_unlock(pte, ptl);
__xip_unmap(mapping, pgoff);
} else {
/* not shared and writable, use ZERO_PAGE() */
- page = ZERO_PAGE(address);
+ page = ZERO_PAGE(0);
}
out:
if (page) {
if (pte_dirty(pte))
set_page_dirty(page);
- page_remove_rmap(page);
+ page_remove_rmap(page, vma);
page_cache_release(page);
}
} else {
mark_page_accessed(page);
file_rss--;
}
- page_remove_rmap(page);
+ page_remove_rmap(page, vma);
tlb_remove_page(tlb, page);
continue;
}
if (pages) {
pages[i] = page;
- flush_anon_page(page, start);
+ flush_anon_page(vma, page, start);
flush_dcache_page(page);
}
if (vmas)
page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte))) {
if (old_page) {
- page_remove_rmap(old_page);
+ page_remove_rmap(old_page, vma);
if (!PageAnon(old_page)) {
dec_mm_counter(mm, file_rss);
inc_mm_counter(mm, anon_rss);
gate_vma.vm_mm = NULL;
gate_vma.vm_start = FIXADDR_USER_START;
gate_vma.vm_end = FIXADDR_USER_END;
- gate_vma.vm_page_prot = PAGE_READONLY;
- gate_vma.vm_flags = 0;
+ gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC;
+ gate_vma.vm_page_prot = __P101;
+ /*
+ * Make sure the vDSO gets into every core dump.
+ * Dumping its contents makes post-mortem fully interpretable later
+ * without matching up the same kernel and hardware config to see
+ * what PC values meant.
+ */
+ gate_vma.vm_flags |= VM_ALWAYSDUMP;
return 0;
}
__initcall(gate_vma_init);
zone_type = zone - pgdat->node_zones;
if (!populated_zone(zone)) {
int ret = 0;
- ret = init_currently_empty_zone(zone, phys_start_pfn, nr_pages);
+ ret = init_currently_empty_zone(zone, phys_start_pfn,
+ nr_pages, MEMMAP_HOTPLUG);
if (ret < 0)
return ret;
}
- memmap_init_zone(nr_pages, nid, zone_type, phys_start_pfn);
+ memmap_init_zone(nr_pages, nid, zone_type,
+ phys_start_pfn, MEMMAP_HOTPLUG);
return 0;
}
err = get_nodes(&nodes, nmask, maxnode);
if (err)
return err;
+#ifdef CONFIG_CPUSETS
+ /* Restrict the nodes to the allowed nodes in the cpuset */
+ nodes_and(nodes, nodes, current->mems_allowed);
+#endif
return do_mbind(start, len, mode, &nodes, flags);
}
if (pte_none(*old_pte))
continue;
pte = ptep_clear_flush(vma, old_addr, old_pte);
- /* ZERO_PAGE can be dependant on virtual addr */
pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr);
set_pte_at(mm, new_addr, new_pte, pte);
}
return 0;
}
- /*
- * swapoff can easily use up all memory, so kill those first.
- */
- if (p->flags & PF_SWAPOFF)
- return ULONG_MAX;
-
/*
* The memory size of the process is the basis for the badness.
*/
*/
task_unlock(p);
+ /*
+ * swapoff can easily use up all memory, so kill those first.
+ */
+ if (p->flags & PF_SWAPOFF)
+ return ULONG_MAX;
+
/*
* Processes which fork a lot of child processes are likely
* a good choice. We add half the vmsize of the children if they
{
#ifdef CONFIG_NUMA
struct zone **z;
- nodemask_t nodes = node_online_map;
+ nodemask_t nodes;
+ int node;
+ /* node has memory ? */
+ for_each_online_node(node)
+ if (NODE_DATA(node)->node_present_pages)
+ node_set(node, nodes);
for (z = zonelist->zones; *z; z++)
if (cpuset_zone_allowed_softwall(*z, gfp_mask))
#ifdef CONFIG_HIGHMEM
/*
- * If this mapping can only allocate from low memory,
- * we exclude high memory from our count.
+ * We always exclude high memory from our count.
*/
- if (mapping && !(mapping_gfp_mask(mapping) & __GFP_HIGHMEM))
- available_memory -= totalhigh_pages;
+ available_memory -= totalhigh_pages;
#endif
};
/*
- * If the machine has a large highmem:lowmem ratio then scale back the default
- * dirty memory thresholds: allowing too much dirty highmem pins an excessive
- * number of buffer_heads.
+ * Called early on to tune the page writeback dirty limits.
+ *
+ * We used to scale dirty pages according to how total memory
+ * related to pages that could be allocated for buffers (by
+ * comparing nr_free_buffer_pages() to vm_total_pages.
+ *
+ * However, that was when we used "dirty_ratio" to scale with
+ * all memory, and we don't do that any more. "dirty_ratio"
+ * is now applied to total non-HIGHPAGE memory (by subtracting
+ * totalhigh_pages from vm_total_pages), and as such we can't
+ * get into the old insane situation any more where we had
+ * large amounts of dirty pages compared to a small amount of
+ * non-HIGHMEM memory.
+ *
+ * But we might still want to scale the dirty_ratio by how
+ * much memory the box has..
*/
void __init page_writeback_init(void)
{
- long buffer_pages = nr_free_buffer_pages();
- long correction;
-
- correction = (100 * 4 * buffer_pages) / vm_total_pages;
-
- if (correction < 100) {
- dirty_background_ratio *= correction;
- dirty_background_ratio /= 100;
- vm_dirty_ratio *= correction;
- vm_dirty_ratio /= 100;
-
- if (dirty_background_ratio <= 0)
- dirty_background_ratio = 1;
- if (vm_dirty_ratio <= 0)
- vm_dirty_ratio = 1;
- }
mod_timer(&wb_timer, jiffies + dirty_writeback_interval);
writeback_set_ratelimit();
register_cpu_notifier(&ratelimit_nb);
}
EXPORT_SYMBOL(set_page_dirty_lock);
-/*
- * Clear a page's dirty flag, while caring for dirty memory accounting.
- * Returns true if the page was previously dirty.
- */
-int test_clear_page_dirty(struct page *page)
-{
- struct address_space *mapping = page_mapping(page);
- unsigned long flags;
-
- if (!mapping)
- return TestClearPageDirty(page);
-
- write_lock_irqsave(&mapping->tree_lock, flags);
- if (TestClearPageDirty(page)) {
- radix_tree_tag_clear(&mapping->page_tree,
- page_index(page), PAGECACHE_TAG_DIRTY);
- write_unlock_irqrestore(&mapping->tree_lock, flags);
- /*
- * We can continue to use `mapping' here because the
- * page is locked, which pins the address_space
- */
- if (mapping_cap_account_dirty(mapping)) {
- page_mkclean(page);
- dec_zone_page_state(page, NR_FILE_DIRTY);
- }
- return 1;
- }
- write_unlock_irqrestore(&mapping->tree_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(test_clear_page_dirty);
-
/*
* Clear a page's dirty flag, while caring for dirty memory accounting.
* Returns true if the page was previously dirty.
{
struct address_space *mapping = page_mapping(page);
- if (!mapping)
- return TestClearPageDirty(page);
-
- if (TestClearPageDirty(page)) {
- if (mapping_cap_account_dirty(mapping)) {
- page_mkclean(page);
+ if (mapping && mapping_cap_account_dirty(mapping)) {
+ /*
+ * Yes, Virginia, this is indeed insane.
+ *
+ * We use this sequence to make sure that
+ * (a) we account for dirty stats properly
+ * (b) we tell the low-level filesystem to
+ * mark the whole page dirty if it was
+ * dirty in a pagetable. Only to then
+ * (c) clean the page again and return 1 to
+ * cause the writeback.
+ *
+ * This way we avoid all nasty races with the
+ * dirty bit in multiple places and clearing
+ * them concurrently from different threads.
+ *
+ * Note! Normally the "set_page_dirty(page)"
+ * has no effect on the actual dirty bit - since
+ * that will already usually be set. But we
+ * need the side effects, and it can help us
+ * avoid races.
+ *
+ * We basically use the page "master dirty bit"
+ * as a serialization point for all the different
+ * threads doing their things.
+ *
+ * FIXME! We still have a race here: if somebody
+ * adds the page back to the page tables in
+ * between the "page_mkclean()" and the "TestClearPageDirty()",
+ * we might have it mapped without the dirty bit set.
+ */
+ if (page_mkclean(page))
+ set_page_dirty(page);
+ if (TestClearPageDirty(page)) {
dec_zone_page_state(page, NR_FILE_DIRTY);
+ return 1;
}
- return 1;
+ return 0;
}
- return 0;
+ return TestClearPageDirty(page);
}
EXPORT_SYMBOL(clear_page_dirty_for_io);
for_each_zone(zone) {
struct per_cpu_pageset *pset;
+ if (!populated_zone(zone))
+ continue;
+
pset = zone_pcp(zone, cpu);
for (i = 0; i < ARRAY_SIZE(pset->pcp); i++) {
struct per_cpu_pages *pcp;
* done. Non-atomic initialization, single-pass.
*/
void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
- unsigned long start_pfn)
+ unsigned long start_pfn, enum memmap_context context)
{
struct page *page;
unsigned long end_pfn = start_pfn + size;
unsigned long pfn;
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
- if (!early_pfn_valid(pfn))
- continue;
- if (!early_pfn_in_nid(pfn, nid))
- continue;
+ /*
+ * There can be holes in boot-time mem_map[]s
+ * handed to this function. They do not
+ * exist on hotplugged memory.
+ */
+ if (context == MEMMAP_EARLY) {
+ if (!early_pfn_valid(pfn))
+ continue;
+ if (!early_pfn_in_nid(pfn, nid))
+ continue;
+ }
page = pfn_to_page(pfn);
set_page_links(page, zone, nid, pfn);
init_page_count(page);
#ifndef __HAVE_ARCH_MEMMAP_INIT
#define memmap_init(size, nid, zone, start_pfn) \
- memmap_init_zone((size), (nid), (zone), (start_pfn))
+ memmap_init_zone((size), (nid), (zone), (start_pfn), MEMMAP_EARLY)
#endif
static int __cpuinit zone_batchsize(struct zone *zone)
__meminit int init_currently_empty_zone(struct zone *zone,
unsigned long zone_start_pfn,
- unsigned long size)
+ unsigned long size,
+ enum memmap_context context)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int ret;
if (!size)
continue;
- ret = init_currently_empty_zone(zone, zone_start_pfn, size);
+ ret = init_currently_empty_zone(zone, zone_start_pfn,
+ size, MEMMAP_EARLY);
BUG_ON(ret);
zone_start_pfn += size;
}
numentries >>= (scale - PAGE_SHIFT);
else
numentries <<= (PAGE_SHIFT - scale);
+
+ /* Make sure we've got at least a 0-order allocation.. */
+ if (unlikely((numentries * bucketsize) < PAGE_SIZE))
+ numentries = PAGE_SIZE / bucketsize;
}
numentries = roundup_pow_of_two(numentries);
#include <linux/rmap.h>
#include <linux/rcupdate.h>
#include <linux/module.h>
+#include <linux/kallsyms.h>
#include <asm/tlbflush.h>
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
- pte_t *pte, entry;
+ pte_t *pte;
spinlock_t *ptl;
int ret = 0;
if (!pte)
goto out;
- if (!pte_dirty(*pte) && !pte_write(*pte))
- goto unlock;
+ if (pte_dirty(*pte) || pte_write(*pte)) {
+ pte_t entry;
- entry = ptep_get_and_clear(mm, address, pte);
- entry = pte_mkclean(entry);
- entry = pte_wrprotect(entry);
- ptep_establish(vma, address, pte, entry);
- lazy_mmu_prot_update(entry);
- ret = 1;
+ flush_cache_page(vma, address, pte_pfn(*pte));
+ entry = ptep_clear_flush(vma, address, pte);
+ entry = pte_wrprotect(entry);
+ entry = pte_mkclean(entry);
+ set_pte_at(mm, address, pte, entry);
+ lazy_mmu_prot_update(entry);
+ ret = 1;
+ }
-unlock:
pte_unmap_unlock(pte, ptl);
out:
return ret;
if (mapping)
ret = page_mkclean_file(mapping, page);
}
+ if (page_test_and_clear_dirty(page))
+ ret = 1;
return ret;
}
*
* The caller needs to hold the pte lock.
*/
-void page_remove_rmap(struct page *page)
+void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
{
if (atomic_add_negative(-1, &page->_mapcount)) {
if (unlikely(page_mapcount(page) < 0)) {
printk (KERN_EMERG "Eeek! page_mapcount(page) went negative! (%d)\n", page_mapcount(page));
+ printk (KERN_EMERG " page pfn = %lx\n", page_to_pfn(page));
printk (KERN_EMERG " page->flags = %lx\n", page->flags);
printk (KERN_EMERG " page->count = %x\n", page_count(page));
printk (KERN_EMERG " page->mapping = %p\n", page->mapping);
+ print_symbol (KERN_EMERG " vma->vm_ops = %s\n", (unsigned long)vma->vm_ops);
+ if (vma->vm_ops)
+ print_symbol (KERN_EMERG " vma->vm_ops->nopage = %s\n", (unsigned long)vma->vm_ops->nopage);
+ if (vma->vm_file && vma->vm_file->f_op)
+ print_symbol (KERN_EMERG " vma->vm_file->f_op->mmap = %s\n", (unsigned long)vma->vm_file->f_op->mmap);
BUG();
}
dec_mm_counter(mm, file_rss);
- page_remove_rmap(page);
+ page_remove_rmap(page, vma);
page_cache_release(page);
out_unmap:
if (pte_dirty(pteval))
set_page_dirty(page);
- page_remove_rmap(page);
+ page_remove_rmap(page, vma);
page_cache_release(page);
dec_mm_counter(mm, file_rss);
(*mapcount)--;
size = SHMEM_NR_DIRECT;
nr_swaps_freed = shmem_free_swp(ptr+idx, ptr+size);
}
- if (!topdir)
+
+ /*
+ * If there are no indirect blocks or we are punching a hole
+ * below indirect blocks, nothing to be done.
+ */
+ if (!topdir || (punch_hole && (limit <= SHMEM_NR_DIRECT)))
goto done2;
BUG_ON(limit <= SHMEM_NR_DIRECT);
flags | GFP_THISNODE, nid);
}
- if (!obj) {
+ if (!obj && !(flags & __GFP_NO_GROW)) {
/*
* This allocation will be performed within the constraints
* of the current cpuset / memory policy requirements.
*/
goto retry;
} else {
- kmem_freepages(cache, obj);
+ /* cache_grow already freed obj */
obj = NULL;
}
}
*
* Currently only used for dentry validation.
*/
-int fastcall kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr)
+int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr)
{
unsigned long addr = (unsigned long)ptr;
unsigned long min_addr = PAGE_OFFSET;
* @cachep: The cache to allocate from.
* @flags: See kmalloc().
* @nodeid: node number of the target node.
+ * @caller: return address of caller, used for debug information
*
* Identical to kmem_cache_alloc but it will allocate memory on the given
* node, which can improve the performance for cpu bound structures.
static DEFINE_SPINLOCK(block_lock);
static void slob_free(void *b, int size);
+static void slob_timer_cbk(void);
+
static void *slob_alloc(size_t size, gfp_t gfp, int align)
{
EXPORT_SYMBOL(kmem_cache_name);
static struct timer_list slob_timer = TIMER_INITIALIZER(
- (void (*)(unsigned long))kmem_cache_init, 0, 0);
+ (void (*)(unsigned long))slob_timer_cbk, 0, 0);
int kmem_cache_shrink(struct kmem_cache *d)
{
return 0;
}
-void kmem_cache_init(void)
+void __init kmem_cache_init(void)
+{
+ slob_timer_cbk();
+}
+
+static void slob_timer_cbk(void)
{
void *p = slob_alloc(PAGE_SIZE, 0, PAGE_SIZE-1);
*
* This is needed for the suspend to disk (aka swsusp).
*/
-int swap_type_of(dev_t device, sector_t offset)
+int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
{
struct block_device *bdev = NULL;
int i;
continue;
if (!bdev) {
+ if (bdev_p)
+ *bdev_p = sis->bdev;
+
spin_unlock(&swap_lock);
return i;
}
se = list_entry(sis->extent_list.next,
struct swap_extent, list);
if (se->start_block == offset) {
+ if (bdev_p)
+ *bdev_p = sis->bdev;
+
spin_unlock(&swap_lock);
bdput(bdev);
return i;
do_invalidatepage(page, partial);
}
+/*
+ * This cancels just the dirty bit on the kernel page itself, it
+ * does NOT actually remove dirty bits on any mmap's that may be
+ * around. It also leaves the page tagged dirty, so any sync
+ * activity will still find it on the dirty lists, and in particular,
+ * clear_page_dirty_for_io() will still look at the dirty bits in
+ * the VM.
+ *
+ * Doing this should *normally* only ever be done when a page
+ * is truncated, and is not actually mapped anywhere at all. However,
+ * fs/buffer.c does this when it notices that somebody has cleaned
+ * out all the buffers on a page without actually doing it through
+ * the VM. Can you say "ext3 is horribly ugly"? Tought you could.
+ */
+void cancel_dirty_page(struct page *page, unsigned int account_size)
+{
+ if (TestClearPageDirty(page)) {
+ struct address_space *mapping = page->mapping;
+ if (mapping && mapping_cap_account_dirty(mapping)) {
+ dec_zone_page_state(page, NR_FILE_DIRTY);
+ if (account_size)
+ task_io_account_cancelled_write(account_size);
+ }
+ }
+}
+EXPORT_SYMBOL(cancel_dirty_page);
+
/*
* If truncate cannot remove the fs-private metadata from the page, the page
* becomes anonymous. It will be left on the LRU and may even be mapped into
if (page->mapping != mapping)
return;
+ cancel_dirty_page(page, PAGE_CACHE_SIZE);
+
if (PagePrivate(page))
do_invalidatepage(page, 0);
- if (test_clear_page_dirty(page))
- task_io_account_cancelled_write(PAGE_CACHE_SIZE);
ClearPageUptodate(page);
ClearPageMappedToDisk(page);
remove_from_page_cache(page);
return 0;
}
+static int do_launder_page(struct address_space *mapping, struct page *page)
+{
+ if (!PageDirty(page))
+ return 0;
+ if (page->mapping != mapping || mapping->a_ops->launder_page == NULL)
+ return 0;
+ return mapping->a_ops->launder_page(page);
+}
+
/**
* invalidate_inode_pages2_range - remove range of pages from an address_space
* @mapping: the address_space
for (i = 0; !ret && i < pagevec_count(&pvec); i++) {
struct page *page = pvec.pages[i];
pgoff_t page_index;
- int was_dirty;
lock_page(page);
if (page->mapping != mapping) {
PAGE_CACHE_SIZE, 0);
}
}
- was_dirty = test_clear_page_dirty(page);
- if (!invalidate_complete_page2(mapping, page)) {
- if (was_dirty)
- set_page_dirty(page);
+ ret = do_launder_page(mapping, page);
+ if (ret == 0 && !invalidate_complete_page2(mapping, page))
ret = -EIO;
- }
unlock_page(page);
}
pagevec_release(&pvec);
cond_resched();
}
- WARN_ON_ONCE(ret);
return ret;
}
EXPORT_SYMBOL_GPL(invalidate_inode_pages2_range);
__count_vm_events(KSWAPD_STEAL, nr_freed);
} else
__count_zone_vm_events(PGSCAN_DIRECT, zone, nr_scan);
- __count_vm_events(PGACTIVATE, nr_freed);
+ __count_zone_vm_events(PGSTEAL, zone, nr_freed);
if (nr_taken == 0)
goto done;
*
* For pass > 3 we also try to shrink the LRU lists that contain a few pages
*/
-static unsigned long shrink_all_zones(unsigned long nr_pages, int pass,
- int prio, struct scan_control *sc)
+static unsigned long shrink_all_zones(unsigned long nr_pages, int prio,
+ int pass, struct scan_control *sc)
{
struct zone *zone;
unsigned long nr_to_scan, ret = 0;
return ret;
}
+static unsigned long count_lru_pages(void)
+{
+ struct zone *zone;
+ unsigned long ret = 0;
+
+ for_each_zone(zone)
+ ret += zone->nr_active + zone->nr_inactive;
+ return ret;
+}
+
/*
* Try to free `nr_pages' of memory, system-wide, and return the number of
* freed pages.
unsigned long ret = 0;
int pass;
struct reclaim_state reclaim_state;
- struct zone *zone;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_swap = 0,
current->reclaim_state = &reclaim_state;
- lru_pages = 0;
- for_each_zone(zone)
- lru_pages += zone->nr_active + zone->nr_inactive;
-
+ lru_pages = count_lru_pages();
nr_slab = global_page_state(NR_SLAB_RECLAIMABLE);
/* If slab caches are huge, it's better to hit them first */
while (nr_slab >= lru_pages) {
for (pass = 0; pass < 5; pass++) {
int prio;
- /* Needed for shrinking slab caches later on */
- if (!lru_pages)
- for_each_zone(zone) {
- lru_pages += zone->nr_active;
- lru_pages += zone->nr_inactive;
- }
-
/* Force reclaiming mapped pages in the passes #3 and #4 */
if (pass > 2) {
sc.may_swap = 1;
goto out;
reclaim_state.reclaimed_slab = 0;
- shrink_slab(sc.nr_scanned, sc.gfp_mask, lru_pages);
+ shrink_slab(sc.nr_scanned, sc.gfp_mask,
+ count_lru_pages());
ret += reclaim_state.reclaimed_slab;
if (ret >= nr_pages)
goto out;
if (sc.nr_scanned && prio < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ / 10);
}
-
- lru_pages = 0;
}
/*
* If ret = 0, we could not shrink LRUs, but there may be something
* in slab caches
*/
- if (!ret)
+ if (!ret) {
do {
reclaim_state.reclaimed_slab = 0;
- shrink_slab(nr_pages, sc.gfp_mask, lru_pages);
+ shrink_slab(nr_pages, sc.gfp_mask, count_lru_pages());
ret += reclaim_state.reclaimed_slab;
} while (ret < nr_pages && reclaim_state.reclaimed_slab > 0);
+ }
out:
current->reclaim_state = NULL;
/*
* FIXME: nonblock behaviour looks like it may have a bug.
*/
-static int ax25_connect(struct socket *sock, struct sockaddr *uaddr,
- int addr_len, int flags)
+static int __must_check ax25_connect(struct socket *sock,
+ struct sockaddr *uaddr, int addr_len, int flags)
{
struct sock *sk = sock->sk;
ax25_cb *ax25 = ax25_sk(sk), *ax25t;
#include <linux/mm.h>
#include <linux/interrupt.h>
-static struct protocol_struct {
- struct protocol_struct *next;
- unsigned int pid;
- int (*func)(struct sk_buff *, ax25_cb *);
-} *protocol_list = NULL;
+static struct ax25_protocol *protocol_list;
static DEFINE_RWLOCK(protocol_list_lock);
-static struct linkfail_struct {
- struct linkfail_struct *next;
- void (*func)(ax25_cb *, int);
-} *linkfail_list = NULL;
+static HLIST_HEAD(ax25_linkfail_list);
static DEFINE_SPINLOCK(linkfail_lock);
static struct listen_struct {
} *listen_list = NULL;
static DEFINE_SPINLOCK(listen_lock);
-int ax25_protocol_register(unsigned int pid,
- int (*func)(struct sk_buff *, ax25_cb *))
+/*
+ * Do not register the internal protocols AX25_P_TEXT, AX25_P_SEGMENT,
+ * AX25_P_IP or AX25_P_ARP ...
+ */
+void ax25_register_pid(struct ax25_protocol *ap)
{
- struct protocol_struct *protocol;
-
- if (pid == AX25_P_TEXT || pid == AX25_P_SEGMENT)
- return 0;
-#ifdef CONFIG_INET
- if (pid == AX25_P_IP || pid == AX25_P_ARP)
- return 0;
-#endif
- if ((protocol = kmalloc(sizeof(*protocol), GFP_ATOMIC)) == NULL)
- return 0;
-
- protocol->pid = pid;
- protocol->func = func;
-
write_lock_bh(&protocol_list_lock);
- protocol->next = protocol_list;
- protocol_list = protocol;
+ ap->next = protocol_list;
+ protocol_list = ap;
write_unlock_bh(&protocol_list_lock);
-
- return 1;
}
-EXPORT_SYMBOL(ax25_protocol_register);
+EXPORT_SYMBOL_GPL(ax25_register_pid);
void ax25_protocol_release(unsigned int pid)
{
- struct protocol_struct *s, *protocol;
+ struct ax25_protocol *s, *protocol;
write_lock_bh(&protocol_list_lock);
protocol = protocol_list;
EXPORT_SYMBOL(ax25_protocol_release);
-int ax25_linkfail_register(void (*func)(ax25_cb *, int))
+void ax25_linkfail_register(struct ax25_linkfail *lf)
{
- struct linkfail_struct *linkfail;
-
- if ((linkfail = kmalloc(sizeof(*linkfail), GFP_ATOMIC)) == NULL)
- return 0;
-
- linkfail->func = func;
-
spin_lock_bh(&linkfail_lock);
- linkfail->next = linkfail_list;
- linkfail_list = linkfail;
+ hlist_add_head(&lf->lf_node, &ax25_linkfail_list);
spin_unlock_bh(&linkfail_lock);
-
- return 1;
}
EXPORT_SYMBOL(ax25_linkfail_register);
-void ax25_linkfail_release(void (*func)(ax25_cb *, int))
+void ax25_linkfail_release(struct ax25_linkfail *lf)
{
- struct linkfail_struct *s, *linkfail;
-
spin_lock_bh(&linkfail_lock);
- linkfail = linkfail_list;
- if (linkfail == NULL) {
- spin_unlock_bh(&linkfail_lock);
- return;
- }
-
- if (linkfail->func == func) {
- linkfail_list = linkfail->next;
- spin_unlock_bh(&linkfail_lock);
- kfree(linkfail);
- return;
- }
-
- while (linkfail != NULL && linkfail->next != NULL) {
- if (linkfail->next->func == func) {
- s = linkfail->next;
- linkfail->next = linkfail->next->next;
- spin_unlock_bh(&linkfail_lock);
- kfree(s);
- return;
- }
-
- linkfail = linkfail->next;
- }
+ hlist_del_init(&lf->lf_node);
spin_unlock_bh(&linkfail_lock);
}
return 0;
if ((listen = kmalloc(sizeof(*listen), GFP_ATOMIC)) == NULL)
- return 0;
+ return -ENOMEM;
listen->callsign = *callsign;
listen->dev = dev;
listen_list = listen;
spin_unlock_bh(&listen_lock);
- return 1;
+ return 0;
}
EXPORT_SYMBOL(ax25_listen_register);
int (*ax25_protocol_function(unsigned int pid))(struct sk_buff *, ax25_cb *)
{
int (*res)(struct sk_buff *, ax25_cb *) = NULL;
- struct protocol_struct *protocol;
+ struct ax25_protocol *protocol;
read_lock(&protocol_list_lock);
for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
spin_lock_bh(&listen_lock);
for (listen = listen_list; listen != NULL; listen = listen->next)
- if (ax25cmp(&listen->callsign, callsign) == 0 && (listen->dev == dev || listen->dev == NULL)) {
+ if (ax25cmp(&listen->callsign, callsign) == 0 &&
+ (listen->dev == dev || listen->dev == NULL)) {
spin_unlock_bh(&listen_lock);
return 1;
}
void ax25_link_failed(ax25_cb *ax25, int reason)
{
- struct linkfail_struct *linkfail;
+ struct ax25_linkfail *lf;
+ struct hlist_node *node;
spin_lock_bh(&linkfail_lock);
- for (linkfail = linkfail_list; linkfail != NULL; linkfail = linkfail->next)
- (linkfail->func)(ax25, reason);
+ hlist_for_each_entry(lf, node, &ax25_linkfail_list, lf_node)
+ lf->func(ax25, reason);
spin_unlock_bh(&linkfail_lock);
}
int ax25_protocol_is_registered(unsigned int pid)
{
- struct protocol_struct *protocol;
+ struct ax25_protocol *protocol;
int res = 0;
read_lock_bh(&protocol_list_lock);
write_unlock(&ax25_route_lock);
}
-static int ax25_rt_add(struct ax25_routes_struct *route)
+static int __must_check ax25_rt_add(struct ax25_routes_struct *route)
{
ax25_route *ax25_rt;
ax25_dev *ax25_dev;
switch (CAPIMSG_SUBCOMMAND(skb->data)) {
case CAPI_CONF:
+ if (skb->len < CAPI_MSG_BASELEN + 10)
+ break;
+
func = CAPIMSG_U16(skb->data, CAPI_MSG_BASELEN + 5);
info = CAPIMSG_U16(skb->data, CAPI_MSG_BASELEN + 8);
break;
case CAPI_FUNCTION_GET_PROFILE:
+ if (skb->len < CAPI_MSG_BASELEN + 11 + sizeof(capi_profile))
+ break;
+
controller = CAPIMSG_U16(skb->data, CAPI_MSG_BASELEN + 11);
msgnum = CAPIMSG_MSGID(skb->data);
break;
case CAPI_FUNCTION_GET_MANUFACTURER:
+ if (skb->len < CAPI_MSG_BASELEN + 15)
+ break;
+
controller = CAPIMSG_U32(skb->data, CAPI_MSG_BASELEN + 10);
if (!info && ctrl) {
+ int len = min_t(uint, CAPI_MANUFACTURER_LEN,
+ skb->data[CAPI_MSG_BASELEN + 14]);
+
+ memset(ctrl->manu, 0, CAPI_MANUFACTURER_LEN);
strncpy(ctrl->manu,
- skb->data + CAPI_MSG_BASELEN + 15,
- skb->data[CAPI_MSG_BASELEN + 14]);
+ skb->data + CAPI_MSG_BASELEN + 15, len);
}
break;
case CAPI_FUNCTION_GET_VERSION:
+ if (skb->len < CAPI_MSG_BASELEN + 32)
+ break;
+
controller = CAPIMSG_U32(skb->data, CAPI_MSG_BASELEN + 12);
if (!info && ctrl) {
break;
case CAPI_FUNCTION_GET_SERIAL_NUMBER:
+ if (skb->len < CAPI_MSG_BASELEN + 17)
+ break;
+
controller = CAPIMSG_U32(skb->data, CAPI_MSG_BASELEN + 12);
if (!info && ctrl) {
+ int len = min_t(uint, CAPI_SERIAL_LEN,
+ skb->data[CAPI_MSG_BASELEN + 16]);
+
memset(ctrl->serial, 0, CAPI_SERIAL_LEN);
strncpy(ctrl->serial,
- skb->data + CAPI_MSG_BASELEN + 17,
- skb->data[CAPI_MSG_BASELEN + 16]);
+ skb->data + CAPI_MSG_BASELEN + 17, len);
}
break;
break;
case CAPI_IND:
+ if (skb->len < CAPI_MSG_BASELEN + 6)
+ break;
+
func = CAPIMSG_U16(skb->data, CAPI_MSG_BASELEN + 3);
if (func == CAPI_FUNCTION_LOOPBACK) {
+ int len = min_t(uint, skb->len - CAPI_MSG_BASELEN - 6,
+ skb->data[CAPI_MSG_BASELEN + 5]);
appl = CAPIMSG_APPID(skb->data);
msgnum = CAPIMSG_MSGID(skb->data);
cmtp_send_interopmsg(session, CAPI_RESP, appl, msgnum, func,
- skb->data + CAPI_MSG_BASELEN + 6,
- skb->data[CAPI_MSG_BASELEN + 5]);
+ skb->data + CAPI_MSG_BASELEN + 6, len);
}
break;
BT_DBG("session %p skb %p len %d", session, skb, skb->len);
+ if (skb->len < CAPI_MSG_BASELEN)
+ return;
+
if (CAPIMSG_COMMAND(skb->data) == CAPI_INTEROPERABILITY) {
cmtp_recv_interopmsg(session, skb);
return;
struct hci_conn *conn = container_of(work, struct hci_conn, work);
int i;
- if (device_register(&conn->dev) < 0) {
+ if (device_add(&conn->dev) < 0) {
BT_ERR("Failed to register connection device");
return;
}
dev_set_drvdata(&conn->dev, conn);
+ device_initialize(&conn->dev);
+
INIT_WORK(&conn->work, add_conn);
schedule_work(&conn->work);
{
BT_DBG("conn %p", conn);
+ if (!device_is_registered(&conn->dev))
+ return;
+
INIT_WORK(&conn->work, del_conn);
schedule_work(&conn->work);
goto done;
}
+ if (la->l2_psm > 0 && btohs(la->l2_psm) < 0x1001 &&
+ !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EACCES;
+ goto done;
+ }
+
write_lock_bh(&l2cap_sk_list.lock);
if (la->l2_psm && __l2cap_get_sock_by_addr(la->l2_psm, &la->l2_bdaddr)) {
str += sprintf(str, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d 0x%x\n",
batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
- sk->sk_state, pi->psm, pi->scid, pi->dcid, pi->imtu,
- pi->omtu, pi->link_mode);
+ sk->sk_state, btohs(pi->psm), pi->scid, pi->dcid,
+ pi->imtu, pi->omtu, pi->link_mode);
}
read_unlock_bh(&l2cap_sk_list.lock);
struct sock *sk = sock->sk;
struct rfcomm_dlc *d = rfcomm_pi(sk)->dlc;
struct sk_buff *skb;
- int err;
int sent = 0;
if (msg->msg_flags & MSG_OOB)
while (len) {
size_t size = min_t(size_t, len, d->mtu);
+ int err;
skb = sock_alloc_send_skb(sk, size + RFCOMM_SKB_RESERVE,
msg->msg_flags & MSG_DONTWAIT, &err);
err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
if (err) {
kfree_skb(skb);
- sent = err;
+ if (sent == 0)
+ sent = err;
break;
}
err = rfcomm_dlc_send(d, skb);
if (err < 0) {
kfree_skb(skb);
+ if (sent == 0)
+ sent = err;
break;
}
release_sock(sk);
- return sent ? sent : err;
+ return sent;
}
static long rfcomm_sock_data_wait(struct sock *sk, long timeo)
BT_DBG("tty %p", tty);
+ if (!dev || !dev->dlc)
+ return 0;
+
room = rfcomm_room(dev->dlc) - atomic_read(&dev->wmem_alloc);
if (room < 0)
room = 0;
+
return room;
}
static int rfcomm_tty_chars_in_buffer(struct tty_struct *tty)
{
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
- struct rfcomm_dlc *dlc = dev->dlc;
BT_DBG("tty %p dev %p", tty, dev);
- if (!skb_queue_empty(&dlc->tx_queue))
- return dlc->mtu;
+ if (!dev || !dev->dlc)
+ return 0;
+
+ if (!skb_queue_empty(&dev->dlc->tx_queue))
+ return dev->dlc->mtu;
return 0;
}
static void rfcomm_tty_flush_buffer(struct tty_struct *tty)
{
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
- if (!dev)
- return;
BT_DBG("tty %p dev %p", tty, dev);
+ if (!dev || !dev->dlc)
+ return;
+
skb_queue_purge(&dev->dlc->tx_queue);
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && tty->ldisc.write_wakeup)
static void rfcomm_tty_hangup(struct tty_struct *tty)
{
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
- if (!dev)
- return;
BT_DBG("tty %p dev %p", tty, dev);
+ if (!dev)
+ return;
+
rfcomm_tty_flush_buffer(tty);
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags))
struct ebt_entry_target *t;
struct ebt_target *target;
unsigned int i, j, hook = 0, hookmask = 0;
- size_t gap = e->next_offset - e->target_offset;
+ size_t gap;
int ret;
/* don't mess with the struct ebt_entries */
if (ret != 0)
goto cleanup_watchers;
t = (struct ebt_entry_target *)(((char *)e) + e->target_offset);
+ gap = e->next_offset - e->target_offset;
target = find_target_lock(t->u.name, &ret, &ebt_mutex);
if (!target)
goto cleanup_watchers;
err = resolver(key, family, dir, &obj, &obj_ref);
- if (fle) {
- if (err) {
- /* Force security policy check on next lookup */
- *head = fle->next;
- flow_entry_kill(cpu, fle);
- } else {
- fle->genid = atomic_read(&flow_cache_genid);
-
- if (fle->object)
- atomic_dec(fle->object_ref);
-
- fle->object = obj;
- fle->object_ref = obj_ref;
- if (obj)
- atomic_inc(fle->object_ref);
- }
+ if (fle && !err) {
+ fle->genid = atomic_read(&flow_cache_genid);
+
+ if (fle->object)
+ atomic_dec(fle->object_ref);
+
+ fle->object = obj;
+ fle->object_ref = obj_ref;
+ if (obj)
+ atomic_inc(fle->object_ref);
}
local_bh_enable();
#include <linux/seq_file.h>
#include <linux/wait.h>
#include <linux/etherdevice.h>
+#include <linux/kthread.h>
#include <net/checksum.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
spinlock_t if_lock;
struct list_head if_list; /* All device here */
struct list_head th_list;
- int removed;
- char name[32];
+ struct task_struct *tsk;
char result[512];
u32 max_before_softirq; /* We'll call do_softirq to prevent starvation. */
BUG_ON(!t);
seq_printf(seq, "Name: %s max_before_softirq: %d\n",
- t->name, t->max_before_softirq);
+ t->tsk->comm, t->max_before_softirq);
seq_printf(seq, "Running: ");
{
/* Remove from the thread list */
- remove_proc_entry(t->name, pg_proc_dir);
+ remove_proc_entry(t->tsk->comm, pg_proc_dir);
mutex_lock(&pktgen_thread_lock);
* Main loop of the thread goes here
*/
-static void pktgen_thread_worker(struct pktgen_thread *t)
+static int pktgen_thread_worker(void *arg)
{
DEFINE_WAIT(wait);
+ struct pktgen_thread *t = arg;
struct pktgen_dev *pkt_dev = NULL;
int cpu = t->cpu;
- sigset_t tmpsig;
u32 max_before_softirq;
u32 tx_since_softirq = 0;
- daemonize("pktgen/%d", cpu);
-
- /* Block all signals except SIGKILL, SIGSTOP and SIGTERM */
-
- spin_lock_irq(¤t->sighand->siglock);
- tmpsig = current->blocked;
- siginitsetinv(¤t->blocked,
- sigmask(SIGKILL) | sigmask(SIGSTOP) | sigmask(SIGTERM));
-
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- /* Migrate to the right CPU */
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
- if (smp_processor_id() != cpu)
- BUG();
+ BUG_ON(smp_processor_id() != cpu);
init_waitqueue_head(&t->queue);
- t->control &= ~(T_TERMINATE);
- t->control &= ~(T_RUN);
- t->control &= ~(T_STOP);
- t->control &= ~(T_REMDEVALL);
- t->control &= ~(T_REMDEV);
-
t->pid = current->pid;
PG_DEBUG(printk("pktgen: starting pktgen/%d: pid=%d\n", cpu, current->pid));
max_before_softirq = t->max_before_softirq;
- __set_current_state(TASK_INTERRUPTIBLE);
- mb();
+ set_current_state(TASK_INTERRUPTIBLE);
- while (1) {
-
- __set_current_state(TASK_RUNNING);
+ while (!kthread_should_stop()) {
+ pkt_dev = next_to_run(t);
- /*
- * Get next dev to xmit -- if any.
- */
+ if (!pkt_dev &&
+ (t->control & (T_STOP | T_RUN | T_REMDEVALL | T_REMDEV))
+ == 0) {
+ prepare_to_wait(&(t->queue), &wait,
+ TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ / 10);
+ finish_wait(&(t->queue), &wait);
+ }
- pkt_dev = next_to_run(t);
+ __set_current_state(TASK_RUNNING);
if (pkt_dev) {
do_softirq();
tx_since_softirq = 0;
}
- } else {
- prepare_to_wait(&(t->queue), &wait, TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 10);
- finish_wait(&(t->queue), &wait);
}
- /*
- * Back from sleep, either due to the timeout or signal.
- * We check if we have any "posted" work for us.
- */
-
- if (t->control & T_TERMINATE || signal_pending(current))
- /* we received a request to terminate ourself */
- break;
-
if (t->control & T_STOP) {
pktgen_stop(t);
t->control &= ~(T_STOP);
t->control &= ~(T_REMDEV);
}
- if (need_resched())
- schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
- PG_DEBUG(printk("pktgen: %s stopping all device\n", t->name));
+ PG_DEBUG(printk("pktgen: %s stopping all device\n", t->tsk->comm));
pktgen_stop(t);
- PG_DEBUG(printk("pktgen: %s removing all device\n", t->name));
+ PG_DEBUG(printk("pktgen: %s removing all device\n", t->tsk->comm));
pktgen_rem_all_ifs(t);
- PG_DEBUG(printk("pktgen: %s removing thread.\n", t->name));
+ PG_DEBUG(printk("pktgen: %s removing thread.\n", t->tsk->comm));
pktgen_rem_thread(t);
- t->removed = 1;
+ return 0;
}
static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t,
return add_dev_to_thread(t, pkt_dev);
}
-static struct pktgen_thread *__init pktgen_find_thread(const char *name)
+static int __init pktgen_create_thread(int cpu)
{
struct pktgen_thread *t;
-
- mutex_lock(&pktgen_thread_lock);
-
- list_for_each_entry(t, &pktgen_threads, th_list)
- if (strcmp(t->name, name) == 0) {
- mutex_unlock(&pktgen_thread_lock);
- return t;
- }
-
- mutex_unlock(&pktgen_thread_lock);
- return NULL;
-}
-
-static int __init pktgen_create_thread(const char *name, int cpu)
-{
- int err;
- struct pktgen_thread *t = NULL;
struct proc_dir_entry *pe;
-
- if (strlen(name) > 31) {
- printk("pktgen: ERROR: Thread name cannot be more than 31 characters.\n");
- return -EINVAL;
- }
-
- if (pktgen_find_thread(name)) {
- printk("pktgen: ERROR: thread: %s already exists\n", name);
- return -EINVAL;
- }
+ struct task_struct *p;
t = kzalloc(sizeof(struct pktgen_thread), GFP_KERNEL);
if (!t) {
return -ENOMEM;
}
- strcpy(t->name, name);
spin_lock_init(&t->if_lock);
t->cpu = cpu;
- pe = create_proc_entry(t->name, 0600, pg_proc_dir);
+ INIT_LIST_HEAD(&t->if_list);
+
+ list_add_tail(&t->th_list, &pktgen_threads);
+
+ p = kthread_create(pktgen_thread_worker, t, "kpktgend_%d", cpu);
+ if (IS_ERR(p)) {
+ printk("pktgen: kernel_thread() failed for cpu %d\n", t->cpu);
+ list_del(&t->th_list);
+ kfree(t);
+ return PTR_ERR(p);
+ }
+ kthread_bind(p, cpu);
+ t->tsk = p;
+
+ pe = create_proc_entry(t->tsk->comm, 0600, pg_proc_dir);
if (!pe) {
printk("pktgen: cannot create %s/%s procfs entry.\n",
- PG_PROC_DIR, t->name);
+ PG_PROC_DIR, t->tsk->comm);
+ kthread_stop(p);
+ list_del(&t->th_list);
kfree(t);
return -EINVAL;
}
pe->proc_fops = &pktgen_thread_fops;
pe->data = t;
- INIT_LIST_HEAD(&t->if_list);
-
- list_add_tail(&t->th_list, &pktgen_threads);
-
- t->removed = 0;
-
- err = kernel_thread((void *)pktgen_thread_worker, (void *)t,
- CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
- if (err < 0) {
- printk("pktgen: kernel_thread() failed for cpu %d\n", t->cpu);
- remove_proc_entry(t->name, pg_proc_dir);
- list_del(&t->th_list);
- kfree(t);
- return err;
- }
+ wake_up_process(p);
return 0;
}
for_each_online_cpu(cpu) {
int err;
- char buf[30];
- sprintf(buf, "kpktgend_%i", cpu);
- err = pktgen_create_thread(buf, cpu);
+ err = pktgen_create_thread(cpu);
if (err)
printk("pktgen: WARNING: Cannot create thread for cpu %d (%d)\n",
cpu, err);
list_for_each_safe(q, n, &pktgen_threads) {
t = list_entry(q, struct pktgen_thread, th_list);
- t->control |= (T_TERMINATE);
-
- wait_event_interruptible_timeout(queue, (t->removed == 1), HZ);
+ kthread_stop(t->tsk);
+ kfree(t);
}
/* Un-register us from receiving netdevice events */
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
- err = icsk->icsk_af_ops->queue_xmit(skb, sk, 0);
+ err = icsk->icsk_af_ops->queue_xmit(skb, 0);
return net_xmit_eval(err);
}
return -ENOBUFS;
code);
if (skb != NULL) {
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
- err = inet_csk(sk)->icsk_af_ops->queue_xmit(skb, sk, 0);
+ err = inet_csk(sk)->icsk_af_ops->queue_xmit(skb, 0);
return net_xmit_eval(err);
}
}
init_timer(&dn_db->timer);
dn_db->uptime = jiffies;
+
+ dn_db->neigh_parms = neigh_parms_alloc(dev, &dn_neigh_table);
+ if (!dn_db->neigh_parms) {
+ dev->dn_ptr = NULL;
+ kfree(dn_db);
+ return NULL;
+ }
+
if (dn_db->parms.up) {
if (dn_db->parms.up(dev) < 0) {
+ neigh_parms_release(&dn_neigh_table, dn_db->neigh_parms);
dev->dn_ptr = NULL;
kfree(dn_db);
return NULL;
}
}
- dn_db->neigh_parms = neigh_parms_alloc(dev, &dn_neigh_table);
-
dn_dev_sysctl_register(dev, &dn_db->parms);
dn_dev_set_timer(dev);
ieee80211softmac_assoc_notify_scan(struct net_device *dev, int event_type, void *context)
{
struct ieee80211softmac_device *mac = ieee80211_priv(dev);
- ieee80211softmac_assoc_work((void*)mac);
+ ieee80211softmac_assoc_work(&mac->associnfo.work.work);
}
static void
switch (event_type) {
case IEEE80211SOFTMAC_EVENT_AUTHENTICATED:
- ieee80211softmac_assoc_work((void*)mac);
+ ieee80211softmac_assoc_work(&mac->associnfo.work.work);
break;
case IEEE80211SOFTMAC_EVENT_AUTH_FAILED:
case IEEE80211SOFTMAC_EVENT_AUTH_TIMEOUT:
err = -E2BIG;
}
spin_unlock_irqrestore(&mac->lock, flags);
- mutex_lock(&mac->associnfo.mutex);
+ mutex_unlock(&mac->associnfo.mutex);
return err;
}
sk->sk_reuse = 1;
inet = inet_sk(sk);
- inet->is_icsk = INET_PROTOSW_ICSK & answer_flags;
+ inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
if (SOCK_RAW == sock->type) {
inet->num = protocol;
NET_IPV4_NEIGH, "ipv4", NULL, NULL);
#endif
- /* Account for reference dev->ip_ptr */
+ /* Account for reference dev->ip_ptr (below) */
in_dev_hold(in_dev);
- rcu_assign_pointer(dev->ip_ptr, in_dev);
#ifdef CONFIG_SYSCTL
devinet_sysctl_register(in_dev, &in_dev->cnf);
ip_mc_init_dev(in_dev);
if (dev->flags & IFF_UP)
ip_mc_up(in_dev);
+
+ /* we can receive as soon as ip_ptr is set -- do this last */
+ rcu_assign_pointer(dev->ip_ptr, in_dev);
out:
return in_dev;
out_kfree:
unsigned cindex = iter->index;
struct tnode *p;
+ /* A single entry routing table */
+ if (!tn)
+ return NULL;
+
pr_debug("get_next iter={node=%p index=%d depth=%d}\n",
iter->tnode, iter->index, iter->depth);
rescan:
if(!iter)
return NULL;
- if (n && IS_TNODE(n)) {
- iter->tnode = (struct tnode *) n;
- iter->trie = t;
- iter->index = 0;
- iter->depth = 1;
+ if (n) {
+ if (IS_TNODE(n)) {
+ iter->tnode = (struct tnode *) n;
+ iter->trie = t;
+ iter->index = 0;
+ iter->depth = 1;
+ } else {
+ iter->tnode = NULL;
+ iter->trie = t;
+ iter->index = 0;
+ iter->depth = 0;
+ }
return n;
}
return NULL;
if (v == SEQ_START_TOKEN)
return 0;
+ if (!NODE_PARENT(n)) {
+ if (iter->trie == trie_local)
+ seq_puts(seq, "<local>:\n");
+ else
+ seq_puts(seq, "<main>:\n");
+ }
+
if (IS_TNODE(n)) {
struct tnode *tn = (struct tnode *) n;
__be32 prf = htonl(MASK_PFX(tn->key, tn->pos));
- if (!NODE_PARENT(n)) {
- if (iter->trie == trie_local)
- seq_puts(seq, "<local>:\n");
- else
- seq_puts(seq, "<main>:\n");
- }
seq_indent(seq, iter->depth-1);
seq_printf(seq, " +-- %d.%d.%d.%d/%d %d %d %d\n",
NIPQUAD(prf), tn->pos, tn->bits, tn->full_children,
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
-int ip_queue_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok)
+int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
{
+ struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(sk);
struct ip_options *opt = inet->opt;
struct rtable *rt;
struct flowi fl = {};
struct dst_entry *odst;
unsigned int hh_len;
+ unsigned int type;
+ type = inet_addr_type(iph->saddr);
if (addr_type == RTN_UNSPEC)
- addr_type = inet_addr_type(iph->saddr);
+ addr_type = type;
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_IP_LOCAL_OUT hook.
*/
if (addr_type == RTN_LOCAL) {
fl.nl_u.ip4_u.daddr = iph->daddr;
- fl.nl_u.ip4_u.saddr = iph->saddr;
+ if (type == RTN_LOCAL)
+ fl.nl_u.ip4_u.saddr = iph->saddr;
fl.nl_u.ip4_u.tos = RT_TOS(iph->tos);
fl.oif = (*pskb)->sk ? (*pskb)->sk->sk_bound_dev_if : 0;
fl.mark = (*pskb)->mark;
depends on INET && NETFILTER
config NF_CONNTRACK_IPV4
- tristate "IPv4 connection tracking support (required for NAT) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "IPv4 connection tracking support (required for NAT)"
+ depends on NF_CONNTRACK
---help---
Connection tracking keeps a record of what packets have passed
through your machine, in order to figure out how they are related
# objects for the standalone - connection tracking / NAT
ip_conntrack-objs := ip_conntrack_standalone.o ip_conntrack_core.o ip_conntrack_proto_generic.o ip_conntrack_proto_tcp.o ip_conntrack_proto_udp.o ip_conntrack_proto_icmp.o
+# objects for l3 independent conntrack
+nf_conntrack_ipv4-objs := nf_conntrack_l3proto_ipv4.o nf_conntrack_proto_icmp.o
+ifeq ($(CONFIG_NF_CONNTRACK_PROC_COMPAT),y)
+ifeq ($(CONFIG_PROC_FS),y)
+nf_conntrack_ipv4-objs += nf_conntrack_l3proto_ipv4_compat.o
+endif
+endif
+
ip_nat-objs := ip_nat_core.o ip_nat_helper.o ip_nat_proto_unknown.o ip_nat_proto_tcp.o ip_nat_proto_udp.o ip_nat_proto_icmp.o
nf_nat-objs := nf_nat_core.o nf_nat_helper.o nf_nat_proto_unknown.o nf_nat_proto_tcp.o nf_nat_proto_udp.o nf_nat_proto_icmp.o
ifneq ($(CONFIG_NF_NAT),)
# connection tracking
obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
+obj-$(CONFIG_NF_CONNTRACK_IPV4) += nf_conntrack_ipv4.o
+
obj-$(CONFIG_IP_NF_NAT) += ip_nat.o
obj-$(CONFIG_NF_NAT) += nf_nat.o
obj-$(CONFIG_IP_NF_QUEUE) += ip_queue.o
-# objects for l3 independent conntrack
-nf_conntrack_ipv4-objs := nf_conntrack_l3proto_ipv4.o nf_conntrack_proto_icmp.o
-ifeq ($(CONFIG_NF_CONNTRACK_PROC_COMPAT),y)
-ifeq ($(CONFIG_PROC_FS),y)
-nf_conntrack_ipv4-objs += nf_conntrack_l3proto_ipv4_compat.o
-endif
-endif
-
-# l3 independent conntrack
-obj-$(CONFIG_NF_CONNTRACK_IPV4) += nf_conntrack_ipv4.o
if (cda[CTA_PROTOINFO-1]) {
err = ctnetlink_change_protoinfo(ct, cda);
if (err < 0)
- return err;
+ goto err;
}
#if defined(CONFIG_IP_NF_CONNTRACK_MARK)
#ifdef CONFIG_COMPAT
struct compat_delta {
struct compat_delta *next;
- u_int16_t offset;
+ unsigned int offset;
short delta;
};
static struct compat_delta *compat_offsets = NULL;
-static int compat_add_offset(u_int16_t offset, short delta)
+static int compat_add_offset(unsigned int offset, short delta)
{
struct compat_delta *tmp;
}
}
-static short compat_calc_jump(u_int16_t offset)
+static short compat_calc_jump(unsigned int offset)
{
struct compat_delta *tmp;
short delta;
void *base, struct xt_table_info *newinfo)
{
struct ipt_entry_target *t;
- u_int16_t entry_offset;
+ unsigned int entry_offset;
int off, i, ret;
off = 0;
{
struct ipt_entry_target *t;
struct ipt_target *target;
- u_int16_t entry_offset;
+ unsigned int entry_offset;
int ret, off, h, j;
duprintf("check_compat_entry_size_and_hooks %p\n", e);
static inline int
device_cmp(struct ip_conntrack *i, void *ifindex)
{
+ int ret;
#ifdef CONFIG_NF_NAT_NEEDED
struct nf_conn_nat *nat = nfct_nat(i);
+
+ if (!nat)
+ return 0;
#endif
- int ret;
read_lock_bh(&masq_lock);
#ifdef CONFIG_NF_NAT_NEEDED
DEBUGP("we are PAC->PNS\n");
/* build tuple for PNS->PAC */
t.src.l3num = AF_INET;
- t.src.u3.ip = master->tuplehash[exp->dir].tuple.src.u3.ip;
+ t.src.u3.ip = master->tuplehash[!exp->dir].tuple.src.u3.ip;
t.src.u.gre.key = nat_pptp_info->pns_call_id;
- t.dst.u3.ip = master->tuplehash[exp->dir].tuple.dst.u3.ip;
+ t.dst.u3.ip = master->tuplehash[!exp->dir].tuple.dst.u3.ip;
t.dst.u.gre.key = nat_pptp_info->pac_call_id;
t.dst.protonum = IPPROTO_GRE;
}
nat = nfct_nat(ct);
if (!nat)
- return NF_DROP;
+ return NF_ACCEPT;
switch (ctinfo) {
case IP_CT_RELATED:
/* Check for load limit; set rate_last to the latest sent
* redirect.
*/
- if (time_after(jiffies,
+ if (rt->u.dst.rate_tokens == 0 ||
+ time_after(jiffies,
(rt->u.dst.rate_last +
(ip_rt_redirect_load << rt->u.dst.rate_tokens)))) {
icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, rt->rt_gateway);
for (j = 0; j < i; j++){
if (after(ntohl(sp[j].start_seq),
ntohl(sp[j+1].start_seq))){
- sp[j].start_seq = htonl(tp->recv_sack_cache[j+1].start_seq);
- sp[j].end_seq = htonl(tp->recv_sack_cache[j+1].end_seq);
- sp[j+1].start_seq = htonl(tp->recv_sack_cache[j].start_seq);
- sp[j+1].end_seq = htonl(tp->recv_sack_cache[j].end_seq);
+ struct tcp_sack_block_wire tmp;
+
+ tmp = sp[j];
+ sp[j] = sp[j+1];
+ sp[j+1] = tmp;
}
}
* But, this leaves one open to an easy denial of
* service attack, and SYN cookies can't defend
* against this problem. So, we drop the data
- * in the interest of security over speed.
+ * in the interest of security over speed unless
+ * it's still in use.
*/
- goto discard;
+ kfree_skb(skb);
+ return 0;
}
goto discard;
TCPOLEN_TIMESTAMP);
rep.opt[1] = htonl(tcp_time_stamp);
rep.opt[2] = htonl(ts);
- arg.iov[0].iov_len = TCPOLEN_TSTAMP_ALIGNED;
+ arg.iov[0].iov_len += TCPOLEN_TSTAMP_ALIGNED;
}
/* Swap the send and the receive. */
if (tp->md5sig_info->entries4 == 0) {
kfree(tp->md5sig_info->keys4);
tp->md5sig_info->keys4 = NULL;
+ tp->md5sig_info->alloced4 = 0;
} else if (tp->md5sig_info->entries4 != i) {
/* Need to do some manipulation */
memcpy(&tp->md5sig_info->keys4[i],
return 0;
if (hash_expected && !hash_location) {
- LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
+ LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
"(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
NIPQUAD(iph->saddr), ntohs(th->source),
NIPQUAD(iph->daddr), ntohs(th->dest));
th = (struct tcphdr *) skb_push(skb, tcp_header_size);
skb->h.th = th;
+ skb_set_owner_w(skb, sk);
/* Build TCP header and checksum it. */
th->source = inet->sport;
if (after(tcb->end_seq, tp->snd_nxt) || tcb->seq == tcb->end_seq)
TCP_INC_STATS(TCP_MIB_OUTSEGS);
- err = icsk->icsk_af_ops->queue_xmit(skb, sk, 0);
+ err = icsk->icsk_af_ops->queue_xmit(skb, 0);
if (likely(err <= 0))
return err;
memcpy(skb_put(skb, next_skb_size), next_skb->data, next_skb_size);
- skb->ip_summed = next_skb->ip_summed;
+ if (next_skb->ip_summed == CHECKSUM_PARTIAL)
+ skb->ip_summed = CHECKSUM_PARTIAL;
if (skb->ip_summed != CHECKSUM_PARTIAL)
skb->csum = csum_block_add(skb->csum, next_skb->csum, skb_size);
#include <net/tcp.h>
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_DESCRIPTION("TCP cwnd snooper");
MODULE_LICENSE("GPL");
goto gotit;
}
size = 0;
- sk_for_each(sk2, node, head)
- if (++size < best_size_so_far) {
- best_size_so_far = size;
- best = result;
- }
+ sk_for_each(sk2, node, head) {
+ if (++size >= best_size_so_far)
+ goto next;
+ }
+ best_size_so_far = size;
+ best = result;
+ next:
+ ;
}
result = best;
for(i = 0; i < (1 << 16) / UDP_HTABLE_SIZE; i++, result += UDP_HTABLE_SIZE) {
static struct inet6_dev * ipv6_add_dev(struct net_device *dev)
{
struct inet6_dev *ndev;
+ struct in6_addr maddr;
ASSERT_RTNL();
if (netif_carrier_ok(dev))
ndev->if_flags |= IF_READY;
- /* protected by rtnl_lock */
- rcu_assign_pointer(dev->ip6_ptr, ndev);
ipv6_mc_init_dev(ndev);
ndev->tstamp = jiffies;
NULL);
addrconf_sysctl_register(ndev, &ndev->cnf);
#endif
+ /* protected by rtnl_lock */
+ rcu_assign_pointer(dev->ip6_ptr, ndev);
+
+ /* Join all-node multicast group */
+ ipv6_addr_all_nodes(&maddr);
+ ipv6_dev_mc_inc(dev, &maddr);
+
return ndev;
}
sk->sk_reuse = 1;
inet = inet_sk(sk);
- inet->is_icsk = INET_PROTOSW_ICSK & answer_flags;
+ inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
if (SOCK_RAW == sock->type) {
inet->num = protocol;
EXPORT_SYMBOL_GPL(inet6_csk_addr2sockaddr);
-int inet6_csk_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok)
+int inet6_csk_xmit(struct sk_buff *skb, int ipfragok)
{
+ struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
struct flowi fl;
void ipv6_mc_init_dev(struct inet6_dev *idev)
{
- struct in6_addr maddr;
-
write_lock_bh(&idev->lock);
rwlock_init(&idev->mc_lock);
idev->mc_gq_running = 0;
idev->mc_maxdelay = IGMP6_UNSOLICITED_IVAL;
idev->mc_v1_seen = 0;
write_unlock_bh(&idev->lock);
-
- /* Add all-nodes address. */
- ipv6_addr_all_nodes(&maddr);
- ipv6_dev_mc_inc(idev->dev, &maddr);
}
/*
config NF_CONNTRACK_IPV6
tristate "IPv6 connection tracking support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ depends on INET && IPV6 && EXPERIMENTAL && NF_CONNTRACK
---help---
Connection tracking keeps a record of what packets have passed
through your machine, in order to figure out how they are related
config IP6_NF_QUEUE
tristate "IP6 Userspace queueing via NETLINK (OBSOLETE)"
+ depends on INET && IPV6 && NETFILTER && EXPERIMENTAL
---help---
This option adds a queue handler to the kernel for IPv6
config IP6_NF_IPTABLES
tristate "IP6 tables support (required for filtering)"
- depends on NETFILTER_XTABLES
+ depends on INET && IPV6 && EXPERIMENTAL && NETFILTER_XTABLES
help
ip6tables is a general, extensible packet identification framework.
Currently only the packet filtering and packet mangling subsystem
s->nfct_reasm = skb;
s2 = s->next;
+ s->next = NULL;
+
NF_HOOK_THRESH(PF_INET6, hooknum, s, in, out, okfn,
NF_IP6_PRI_CONNTRACK_DEFRAG + 1);
s = s2;
+ nla_total_size(4) /* RTA_IIF */
+ nla_total_size(4) /* RTA_OIF */
+ nla_total_size(4) /* RTA_PRIORITY */
+ + RTAX_MAX * nla_total_size(4) /* RTA_METRICS */
+ nla_total_size(sizeof(struct rta_cacheinfo));
}
depends on NF_CONNTRACK_ENABLED
config NF_CONNTRACK_SUPPORT
- bool "Layer 3 Independent Connection tracking (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Layer 3 Independent Connection tracking"
help
Layer 3 independent connection tracking is experimental scheme
which generalize ip_conntrack to support other layer 3 protocols.
config NF_CT_PROTO_GRE
tristate
- depends on EXPERIMENTAL && NF_CONNTRACK
+ depends on NF_CONNTRACK
config NF_CT_PROTO_SCTP
tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)'
Documentation/modules.txt. If unsure, say `N'.
config NF_CONNTRACK_AMANDA
- tristate "Amanda backup protocol support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "Amanda backup protocol support"
+ depends on NF_CONNTRACK
select TEXTSEARCH
select TEXTSEARCH_KMP
help
To compile it as a module, choose M here. If unsure, say N.
config NF_CONNTRACK_FTP
- tristate "FTP protocol support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "FTP protocol support"
+ depends on NF_CONNTRACK
help
Tracking FTP connections is problematic: special helpers are
required for tracking them, and doing masquerading and other forms
To compile it as a module, choose M here. If unsure, say N.
config NF_CONNTRACK_IRC
- tristate "IRC protocol support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "IRC protocol support"
+ depends on NF_CONNTRACK
help
There is a commonly-used extension to IRC called
Direct Client-to-Client Protocol (DCC). This enables users to send
To compile it as a module, choose M here. If unsure, say N.
config NF_CONNTRACK_PPTP
- tristate "PPtP protocol support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "PPtP protocol support"
+ depends on NF_CONNTRACK
select NF_CT_PROTO_GRE
help
This module adds support for PPTP (Point to Point Tunnelling
To compile it as a module, choose M here. If unsure, say N.
config NF_CONNTRACK_TFTP
- tristate "TFTP protocol support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ tristate "TFTP protocol support"
+ depends on NF_CONNTRACK
help
TFTP connection tracking helper, this is required depending
on how restrictive your ruleset is.
exp->expectfn = NULL;
exp->flags = NF_CT_EXPECT_PERMANENT;
+ exp->helper = NULL;
nf_conntrack_expect_related(exp);
nf_conntrack_expect_put(exp);
if (cda[CTA_PROTOINFO-1]) {
err = ctnetlink_change_protoinfo(ct, cda);
if (err < 0)
- return err;
+ goto err;
}
#if defined(CONFIG_NF_CONNTRACK_MARK)
rcu_read_lock();
nf_nat_pptp_expectfn = rcu_dereference(nf_nat_pptp_hook_expectfn);
- if (nf_nat_pptp_expectfn && ct->status & IPS_NAT_MASK)
+ if (nf_nat_pptp_expectfn && ct->master->status & IPS_NAT_MASK)
nf_nat_pptp_expectfn(ct, exp);
else {
struct nf_conntrack_tuple inv_t;
}
hashlimit_procdir6 = proc_mkdir("ip6t_hashlimit", proc_net);
if (!hashlimit_procdir6) {
- printk(KERN_ERR "xt_hashlimit: tnable to create proc dir "
+ printk(KERN_ERR "xt_hashlimit: unable to create proc dir "
"entry\n");
goto err4;
}
nla_for_each_nested(nla, info->attrs[NLBL_CIPSOV4_A_TAGLST], nla_rem)
if (nla->nla_type == NLBL_CIPSOV4_A_TAG) {
- if (iter > CIPSO_V4_TAG_MAXCNT)
+ if (iter >= CIPSO_V4_TAG_MAXCNT)
return -EINVAL;
doi_def->tags[iter++] = nla_get_u8(nla);
}
- if (iter < CIPSO_V4_TAG_MAXCNT)
- doi_def->tags[iter] = CIPSO_V4_TAG_INVALID;
+ while (iter < CIPSO_V4_TAG_MAXCNT)
+ doi_def->tags[iter++] = CIPSO_V4_TAG_INVALID;
return 0;
}
struct nlattr *nla_b;
int nla_a_rem;
int nla_b_rem;
+ u32 iter;
if (!info->attrs[NLBL_CIPSOV4_A_TAGLST] ||
!info->attrs[NLBL_CIPSOV4_A_MLSLVLLST])
ret_val = netlbl_cipsov4_add_common(info, doi_def);
if (ret_val != 0)
goto add_std_failure;
+ ret_val = -EINVAL;
nla_for_each_nested(nla_a,
info->attrs[NLBL_CIPSOV4_A_MLSLVLLST],
nla_a_rem)
if (nla_a->nla_type == NLBL_CIPSOV4_A_MLSLVL) {
+ if (nla_validate_nested(nla_a,
+ NLBL_CIPSOV4_A_MAX,
+ netlbl_cipsov4_genl_policy) != 0)
+ goto add_std_failure;
nla_for_each_nested(nla_b, nla_a, nla_b_rem)
switch (nla_b->nla_type) {
case NLBL_CIPSOV4_A_MLSLVLLOC:
+ if (nla_get_u32(nla_b) >
+ CIPSO_V4_MAX_LOC_LVLS)
+ goto add_std_failure;
if (nla_get_u32(nla_b) >=
doi_def->map.std->lvl.local_size)
doi_def->map.std->lvl.local_size =
nla_get_u32(nla_b) + 1;
break;
case NLBL_CIPSOV4_A_MLSLVLREM:
+ if (nla_get_u32(nla_b) >
+ CIPSO_V4_MAX_REM_LVLS)
+ goto add_std_failure;
if (nla_get_u32(nla_b) >=
doi_def->map.std->lvl.cipso_size)
doi_def->map.std->lvl.cipso_size =
break;
}
}
- if (doi_def->map.std->lvl.local_size > CIPSO_V4_MAX_LOC_LVLS ||
- doi_def->map.std->lvl.cipso_size > CIPSO_V4_MAX_REM_LVLS)
- goto add_std_failure;
doi_def->map.std->lvl.local = kcalloc(doi_def->map.std->lvl.local_size,
sizeof(u32),
GFP_KERNEL);
ret_val = -ENOMEM;
goto add_std_failure;
}
+ for (iter = 0; iter < doi_def->map.std->lvl.local_size; iter++)
+ doi_def->map.std->lvl.local[iter] = CIPSO_V4_INV_LVL;
+ for (iter = 0; iter < doi_def->map.std->lvl.cipso_size; iter++)
+ doi_def->map.std->lvl.cipso[iter] = CIPSO_V4_INV_LVL;
nla_for_each_nested(nla_a,
info->attrs[NLBL_CIPSOV4_A_MLSLVLLST],
nla_a_rem)
struct nlattr *lvl_loc;
struct nlattr *lvl_rem;
- if (nla_validate_nested(nla_a,
- NLBL_CIPSOV4_A_MAX,
- netlbl_cipsov4_genl_policy) != 0)
- goto add_std_failure;
-
lvl_loc = nla_find_nested(nla_a,
NLBL_CIPSOV4_A_MLSLVLLOC);
lvl_rem = nla_find_nested(nla_a,
nla_for_each_nested(nla_b, nla_a, nla_b_rem)
switch (nla_b->nla_type) {
case NLBL_CIPSOV4_A_MLSCATLOC:
+ if (nla_get_u32(nla_b) >
+ CIPSO_V4_MAX_LOC_CATS)
+ goto add_std_failure;
if (nla_get_u32(nla_b) >=
doi_def->map.std->cat.local_size)
doi_def->map.std->cat.local_size =
nla_get_u32(nla_b) + 1;
break;
case NLBL_CIPSOV4_A_MLSCATREM:
+ if (nla_get_u32(nla_b) >
+ CIPSO_V4_MAX_REM_CATS)
+ goto add_std_failure;
if (nla_get_u32(nla_b) >=
doi_def->map.std->cat.cipso_size)
doi_def->map.std->cat.cipso_size =
break;
}
}
- if (doi_def->map.std->cat.local_size > CIPSO_V4_MAX_LOC_CATS ||
- doi_def->map.std->cat.cipso_size > CIPSO_V4_MAX_REM_CATS)
- goto add_std_failure;
doi_def->map.std->cat.local = kcalloc(
doi_def->map.std->cat.local_size,
sizeof(u32),
ret_val = -ENOMEM;
goto add_std_failure;
}
+ for (iter = 0; iter < doi_def->map.std->cat.local_size; iter++)
+ doi_def->map.std->cat.local[iter] = CIPSO_V4_INV_CAT;
+ for (iter = 0; iter < doi_def->map.std->cat.cipso_size; iter++)
+ doi_def->map.std->cat.cipso[iter] = CIPSO_V4_INV_CAT;
nla_for_each_nested(nla_a,
info->attrs[NLBL_CIPSOV4_A_MLSCATLST],
nla_a_rem)
NETLINK_URELEASE, &n);
}
- if (nlk->module)
- module_put(nlk->module);
+ module_put(nlk->module);
netlink_table_grab();
if (nlk->flags & NETLINK_KERNEL_SOCKET) {
static struct net_device **dev_nr;
+static struct ax25_protocol nr_pid = {
+ .pid = AX25_P_NETROM,
+ .func = nr_route_frame
+};
+
+static struct ax25_linkfail nr_linkfail_notifier = {
+ .func = nr_link_failed,
+};
+
static int __init nr_proto_init(void)
{
int i;
register_netdevice_notifier(&nr_dev_notifier);
- ax25_protocol_register(AX25_P_NETROM, nr_route_frame);
- ax25_linkfail_register(nr_link_failed);
+ ax25_register_pid(&nr_pid);
+ ax25_linkfail_register(&nr_linkfail_notifier);
#ifdef CONFIG_SYSCTL
nr_register_sysctl();
nr_unregister_sysctl();
#endif
- ax25_linkfail_release(nr_link_failed);
+ ax25_linkfail_release(&nr_linkfail_notifier);
ax25_protocol_release(AX25_P_NETROM);
unregister_netdevice_notifier(&nr_dev_notifier);
return -37;
}
-static int nr_set_mac_address(struct net_device *dev, void *addr)
+static int __must_check nr_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sa = addr;
+ int err;
+
+ if (!memcmp(dev->dev_addr, sa->sa_data, dev->addr_len))
+ return 0;
+
+ if (dev->flags & IFF_UP) {
+ err = ax25_listen_register((ax25_address *)sa->sa_data, NULL);
+ if (err)
+ return err;
- if (dev->flags & IFF_UP)
ax25_listen_release((ax25_address *)dev->dev_addr, NULL);
+ }
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
- if (dev->flags & IFF_UP)
- ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
-
return 0;
}
static int nr_open(struct net_device *dev)
{
+ int err;
+
+ err = ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
+ if (err)
+ return err;
+
netif_start_queue(dev);
- ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
+
return 0;
}
* Add a new route to a node, and in the process add the node and the
* neighbour if it is new.
*/
-static int nr_add_node(ax25_address *nr, const char *mnemonic, ax25_address *ax25,
- ax25_digi *ax25_digi, struct net_device *dev, int quality, int obs_count)
+static int __must_check nr_add_node(ax25_address *nr, const char *mnemonic,
+ ax25_address *ax25, ax25_digi *ax25_digi, struct net_device *dev,
+ int quality, int obs_count)
{
struct nr_node *nr_node;
struct nr_neigh *nr_neigh;
/*
* Lock a neighbour with a quality.
*/
-static int nr_add_neigh(ax25_address *callsign, ax25_digi *ax25_digi, struct net_device *dev, unsigned int quality)
+static int __must_check nr_add_neigh(ax25_address *callsign,
+ ax25_digi *ax25_digi, struct net_device *dev, unsigned int quality)
{
struct nr_neigh *nr_neigh;
nr_src = (ax25_address *)(skb->data + 0);
nr_dest = (ax25_address *)(skb->data + 7);
- if (ax25 != NULL)
- nr_add_node(nr_src, "", &ax25->dest_addr, ax25->digipeat,
- ax25->ax25_dev->dev, 0, sysctl_netrom_obsolescence_count_initialiser);
+ if (ax25 != NULL) {
+ ret = nr_add_node(nr_src, "", &ax25->dest_addr, ax25->digipeat,
+ ax25->ax25_dev->dev, 0,
+ sysctl_netrom_obsolescence_count_initialiser);
+ if (ret)
+ return ret;
+ }
if ((dev = nr_dev_get(nr_dest)) != NULL) { /* Its for me */
if (ax25 == NULL) /* Its from me */
ret = (nr_neigh->ax25 != NULL);
nr_node_unlock(nr_node);
nr_node_put(nr_node);
+
return ret;
}
if (dev == NULL)
goto out_unlock;
+ err = -ENETDOWN;
+ if (!(dev->flags & IFF_UP))
+ goto out_unlock;
+
/*
* You may not queue a frame bigger than the mtu. This is the lowest level
* raw protocol and you must do your own fragmentation at this level.
if (err)
goto out_free;
- err = -ENETDOWN;
- if (!(dev->flags & IFF_UP))
- goto out_free;
-
/*
* Now send it
*/
}
#endif
-static inline int run_filter(struct sk_buff *skb, struct sock *sk,
- unsigned *snaplen)
+static inline unsigned int run_filter(struct sk_buff *skb, struct sock *sk,
+ unsigned int res)
{
struct sk_filter *filter;
- int err = 0;
rcu_read_lock_bh();
filter = rcu_dereference(sk->sk_filter);
- if (filter != NULL) {
- err = sk_run_filter(skb, filter->insns, filter->len);
- if (!err)
- err = -EPERM;
- else if (*snaplen > err)
- *snaplen = err;
- }
+ if (filter != NULL)
+ res = sk_run_filter(skb, filter->insns, filter->len);
rcu_read_unlock_bh();
- return err;
+ return res;
}
/*
struct packet_sock *po;
u8 * skb_head = skb->data;
int skb_len = skb->len;
- unsigned snaplen;
+ unsigned int snaplen, res;
if (skb->pkt_type == PACKET_LOOPBACK)
goto drop;
snaplen = skb->len;
- if (run_filter(skb, sk, &snaplen) < 0)
+ res = run_filter(skb, sk, snaplen);
+ if (!res)
goto drop_n_restore;
+ if (snaplen > res)
+ snaplen = res;
if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
(unsigned)sk->sk_rcvbuf)
struct tpacket_hdr *h;
u8 * skb_head = skb->data;
int skb_len = skb->len;
- unsigned snaplen;
+ unsigned int snaplen, res;
unsigned long status = TP_STATUS_LOSING|TP_STATUS_USER;
unsigned short macoff, netoff;
struct sk_buff *copy_skb = NULL;
snaplen = skb->len;
- if (run_filter(skb, sk, &snaplen) < 0)
+ res = run_filter(skb, sk, snaplen);
+ if (!res)
goto drop_n_restore;
+ if (snaplen > res)
+ snaplen = res;
if (sk->sk_type == SOCK_DGRAM) {
macoff = netoff = TPACKET_ALIGN(TPACKET_HDRLEN) + 16;
if (sock->type == SOCK_RAW)
reserve = dev->hard_header_len;
+ err = -ENETDOWN;
+ if (!(dev->flags & IFF_UP))
+ goto out_unlock;
+
err = -EMSGSIZE;
if (len > dev->mtu+reserve)
goto out_unlock;
skb->dev = dev;
skb->priority = sk->sk_priority;
- err = -ENETDOWN;
- if (!(dev->flags & IFF_UP))
- goto out_free;
-
/*
* Now send it
*/
if (copy_from_user(&rose_callsign, argp, sizeof(ax25_address)))
return -EFAULT;
if (ax25cmp(&rose_callsign, &null_ax25_address) != 0)
- ax25_listen_register(&rose_callsign, NULL);
+ return ax25_listen_register(&rose_callsign, NULL);
+
return 0;
case SIOCRSGL2CALL:
static struct net_device **dev_rose;
+static struct ax25_protocol rose_pid = {
+ .pid = AX25_P_ROSE,
+ .func = rose_route_frame
+};
+
+static struct ax25_linkfail rose_linkfail_notifier = {
+ .func = rose_link_failed
+};
+
static int __init rose_proto_init(void)
{
int i;
sock_register(&rose_family_ops);
register_netdevice_notifier(&rose_dev_notifier);
- ax25_protocol_register(AX25_P_ROSE, rose_route_frame);
- ax25_linkfail_register(rose_link_failed);
+ ax25_register_pid(&rose_pid);
+ ax25_linkfail_register(&rose_linkfail_notifier);
#ifdef CONFIG_SYSCTL
rose_register_sysctl();
rose_rt_free();
ax25_protocol_release(AX25_P_ROSE);
- ax25_linkfail_release(rose_link_failed);
+ ax25_linkfail_release(&rose_linkfail_notifier);
if (ax25cmp(&rose_callsign, &null_ax25_address) != 0)
ax25_listen_release(&rose_callsign, NULL);
static int rose_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sa = addr;
+ int err;
- rose_del_loopback_node((rose_address *)dev->dev_addr);
+ if (!memcpy(dev->dev_addr, sa->sa_data, dev->addr_len))
+ return 0;
- memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+ if (dev->flags & IFF_UP) {
+ err = rose_add_loopback_node((rose_address *)dev->dev_addr);
+ if (err)
+ return err;
+
+ rose_del_loopback_node((rose_address *)dev->dev_addr);
+ }
- rose_add_loopback_node((rose_address *)dev->dev_addr);
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
return 0;
}
static int rose_open(struct net_device *dev)
{
+ int err;
+
+ err = rose_add_loopback_node((rose_address *)dev->dev_addr);
+ if (err)
+ return err;
+
netif_start_queue(dev);
- rose_add_loopback_node((rose_address *)dev->dev_addr);
+
return 0;
}
skb->h.raw = skb->data;
- if ((sk = rose_find_socket(lci_o, rose_loopback_neigh)) != NULL) {
+ sk = rose_find_socket(lci_o, &rose_loopback_neigh);
+ if (sk) {
if (rose_process_rx_frame(sk, skb) == 0)
kfree_skb(skb);
continue;
if (frametype == ROSE_CALL_REQUEST) {
if ((dev = rose_dev_get(dest)) != NULL) {
- if (rose_rx_call_request(skb, dev, rose_loopback_neigh, lci_o) == 0)
+ if (rose_rx_call_request(skb, dev, &rose_loopback_neigh, lci_o) == 0)
kfree_skb(skb);
} else {
kfree_skb(skb);
static struct rose_route *rose_route_list;
static DEFINE_SPINLOCK(rose_route_list_lock);
-struct rose_neigh *rose_loopback_neigh;
+struct rose_neigh rose_loopback_neigh;
/*
* Add a new route to a node, and in the process add the node and the
* neighbour if it is new.
*/
-static int rose_add_node(struct rose_route_struct *rose_route,
+static int __must_check rose_add_node(struct rose_route_struct *rose_route,
struct net_device *dev)
{
struct rose_node *rose_node, *rose_tmpn, *rose_tmpp;
/*
* Add the loopback neighbour.
*/
-int rose_add_loopback_neigh(void)
+void rose_add_loopback_neigh(void)
{
- if ((rose_loopback_neigh = kmalloc(sizeof(struct rose_neigh), GFP_ATOMIC)) == NULL)
- return -ENOMEM;
+ struct rose_neigh *sn = &rose_loopback_neigh;
- rose_loopback_neigh->callsign = null_ax25_address;
- rose_loopback_neigh->digipeat = NULL;
- rose_loopback_neigh->ax25 = NULL;
- rose_loopback_neigh->dev = NULL;
- rose_loopback_neigh->count = 0;
- rose_loopback_neigh->use = 0;
- rose_loopback_neigh->dce_mode = 1;
- rose_loopback_neigh->loopback = 1;
- rose_loopback_neigh->number = rose_neigh_no++;
- rose_loopback_neigh->restarted = 1;
+ sn->callsign = null_ax25_address;
+ sn->digipeat = NULL;
+ sn->ax25 = NULL;
+ sn->dev = NULL;
+ sn->count = 0;
+ sn->use = 0;
+ sn->dce_mode = 1;
+ sn->loopback = 1;
+ sn->number = rose_neigh_no++;
+ sn->restarted = 1;
- skb_queue_head_init(&rose_loopback_neigh->queue);
+ skb_queue_head_init(&sn->queue);
- init_timer(&rose_loopback_neigh->ftimer);
- init_timer(&rose_loopback_neigh->t0timer);
+ init_timer(&sn->ftimer);
+ init_timer(&sn->t0timer);
spin_lock_bh(&rose_neigh_list_lock);
- rose_loopback_neigh->next = rose_neigh_list;
- rose_neigh_list = rose_loopback_neigh;
+ sn->next = rose_neigh_list;
+ rose_neigh_list = sn;
spin_unlock_bh(&rose_neigh_list_lock);
-
- return 0;
}
/*
rose_node->mask = 10;
rose_node->count = 1;
rose_node->loopback = 1;
- rose_node->neighbour[0] = rose_loopback_neigh;
+ rose_node->neighbour[0] = &rose_loopback_neigh;
/* Insert at the head of list. Address is always mask=10 */
rose_node->next = rose_node_list;
rose_node_list = rose_node;
- rose_loopback_neigh->count++;
+ rose_loopback_neigh.count++;
out:
spin_unlock_bh(&rose_node_list_lock);
rose_remove_node(rose_node);
- rose_loopback_neigh->count--;
+ rose_loopback_neigh.count--;
out:
spin_unlock_bh(&rose_node_list_lock);
#include <asm/uaccess.h>
/* Event handler for inet6 address addition/deletion events. */
-int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev,
- void *ptr)
+static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev,
+ void *ptr)
{
struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr;
struct sctp_sockaddr_entry *addr;
}
/* Event handler for inet address addition/deletion events. */
-int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
- void *ptr)
+static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
+ void *ptr)
{
struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
struct sctp_sockaddr_entry *addr;
NIPQUAD(((struct rtable *)skb->dst)->rt_dst));
SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
- return ip_queue_xmit(skb, skb->sk, ipfragok);
+ return ip_queue_xmit(skb, ipfragok);
}
static struct sctp_af sctp_ipv4_specific;
padlen = len % 4;
err.length = htons(len);
len += padlen;
- sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
- chunk->subh.err_hdr = sctp_addto_chunk(chunk, paylen, payload);
+ chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
+ sctp_addto_chunk(chunk, paylen, payload);
}
/* 3.3.2 Initiation (INIT) (1)
struct sctp_sock *sp;
sctp_supported_addrs_param_t sat;
__be16 types[2];
- sctp_adaption_ind_param_t aiparam;
+ sctp_adaptation_ind_param_t aiparam;
/* RFC 2960 3.3.2 Initiation (INIT) (1)
*
sctp_addto_chunk(retval, sizeof(ecap_param), &ecap_param);
if (sctp_prsctp_enable)
sctp_addto_chunk(retval, sizeof(prsctp_param), &prsctp_param);
- aiparam.param_hdr.type = SCTP_PARAM_ADAPTION_LAYER_IND;
+ aiparam.param_hdr.type = SCTP_PARAM_ADAPTATION_LAYER_IND;
aiparam.param_hdr.length = htons(sizeof(aiparam));
- aiparam.adaption_ind = htonl(sp->adaption_ind);
+ aiparam.adaptation_ind = htonl(sp->adaptation_ind);
sctp_addto_chunk(retval, sizeof(aiparam), &aiparam);
nodata:
kfree(addrs.v);
sctp_cookie_param_t *cookie;
int cookie_len;
size_t chunksize;
- sctp_adaption_ind_param_t aiparam;
+ sctp_adaptation_ind_param_t aiparam;
retval = NULL;
if (asoc->peer.prsctp_capable)
sctp_addto_chunk(retval, sizeof(prsctp_param), &prsctp_param);
- aiparam.param_hdr.type = SCTP_PARAM_ADAPTION_LAYER_IND;
+ aiparam.param_hdr.type = SCTP_PARAM_ADAPTATION_LAYER_IND;
aiparam.param_hdr.length = htons(sizeof(aiparam));
- aiparam.adaption_ind = htonl(sctp_sk(asoc->base.sk)->adaption_ind);
+ aiparam.adaptation_ind = htonl(sctp_sk(asoc->base.sk)->adaptation_ind);
sctp_addto_chunk(retval, sizeof(aiparam), &aiparam);
/* We need to remove the const qualifier at this point. */
/* Remember PR-SCTP capability. */
cookie->c.prsctp_capable = asoc->peer.prsctp_capable;
- /* Save adaption indication in the cookie. */
- cookie->c.adaption_ind = asoc->peer.adaption_ind;
+ /* Save adaptation indication in the cookie. */
+ cookie->c.adaptation_ind = asoc->peer.adaptation_ind;
/* Set an expiration time for the cookie. */
do_gettimeofday(&cookie->c.expiration);
retval->addip_serial = retval->c.initial_tsn;
retval->adv_peer_ack_point = retval->ctsn_ack_point;
retval->peer.prsctp_capable = retval->c.prsctp_capable;
- retval->peer.adaption_ind = retval->c.adaption_ind;
+ retval->peer.adaptation_ind = retval->c.adaptation_ind;
/* The INIT stuff will be done by the side effects. */
return retval;
if (*errp) {
report.num_missing = htonl(1);
report.type = paramtype;
- sctp_init_cause(*errp, SCTP_ERROR_INV_PARAM,
+ sctp_init_cause(*errp, SCTP_ERROR_MISS_PARAM,
&report, sizeof(report));
}
case SCTP_PARAM_HEARTBEAT_INFO:
case SCTP_PARAM_UNRECOGNIZED_PARAMETERS:
case SCTP_PARAM_ECN_CAPABLE:
- case SCTP_PARAM_ADAPTION_LAYER_IND:
+ case SCTP_PARAM_ADAPTATION_LAYER_IND:
break;
case SCTP_PARAM_HOST_NAME_ADDRESS:
/* Verify stream values are non-zero. */
if ((0 == peer_init->init_hdr.num_outbound_streams) ||
- (0 == peer_init->init_hdr.num_inbound_streams)) {
+ (0 == peer_init->init_hdr.num_inbound_streams) ||
+ (0 == peer_init->init_hdr.init_tag) ||
+ (SCTP_DEFAULT_MINWINDOW > ntohl(peer_init->init_hdr.a_rwnd))) {
sctp_process_inv_mandatory(asoc, chunk, errp);
return 0;
asoc->peer.ecn_capable = 1;
break;
- case SCTP_PARAM_ADAPTION_LAYER_IND:
- asoc->peer.adaption_ind = param.aind->adaption_ind;
+ case SCTP_PARAM_ADAPTATION_LAYER_IND:
+ asoc->peer.adaptation_ind = param.aind->adaptation_ind;
break;
case SCTP_PARAM_FWD_TSN_SUPPORT:
asoc->peer.sack_needed = 0;
- error = sctp_outq_tail(&asoc->outqueue, sack);
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(sack));
/* Stop the SACK timer. */
sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
{
struct sctp_chunk *chunk = arg;
sctp_init_chunk_t *initchunk;
- __u32 init_tag;
struct sctp_chunk *err_chunk;
struct sctp_packet *packet;
sctp_error_t error;
/* Grab the INIT header. */
chunk->subh.init_hdr = (sctp_inithdr_t *) chunk->skb->data;
- init_tag = ntohl(chunk->subh.init_hdr->init_tag);
-
- /* Verification Tag: 3.3.3
- * If the value of the Initiate Tag in a received INIT ACK
- * chunk is found to be 0, the receiver MUST treat it as an
- * error and close the association by transmitting an ABORT.
- */
- if (!init_tag) {
- struct sctp_chunk *reply = sctp_make_abort(asoc, chunk, 0);
- if (!reply)
- goto nomem;
-
- sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
- return sctp_stop_t1_and_abort(commands, SCTP_ERROR_INV_PARAM,
- ECONNREFUSED, asoc,
- chunk->transport);
- }
-
/* Verify the INIT chunk before processing it. */
err_chunk = NULL;
if (!sctp_verify_init(asoc, chunk->chunk_hdr->type,
SCTP_CHUNK(err_chunk));
return SCTP_DISPOSITION_CONSUME;
-
-nomem:
- return SCTP_DISPOSITION_NOMEM;
}
/*
goto nomem_ev;
/* Sockets API Draft Section 5.3.1.6
- * When a peer sends a Adaption Layer Indication parameter , SCTP
+ * When a peer sends a Adaptation Layer Indication parameter , SCTP
* delivers this notification to inform the application that of the
- * peers requested adaption layer.
+ * peers requested adaptation layer.
*/
- if (new_asoc->peer.adaption_ind) {
- ai_ev = sctp_ulpevent_make_adaption_indication(new_asoc,
+ if (new_asoc->peer.adaptation_ind) {
+ ai_ev = sctp_ulpevent_make_adaptation_indication(new_asoc,
GFP_ATOMIC);
if (!ai_ev)
goto nomem_aiev;
sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
/* Sockets API Draft Section 5.3.1.6
- * When a peer sends a Adaption Layer Indication parameter , SCTP
+ * When a peer sends a Adaptation Layer Indication parameter , SCTP
* delivers this notification to inform the application that of the
- * peers requested adaption layer.
+ * peers requested adaptation layer.
*/
- if (asoc->peer.adaption_ind) {
- ev = sctp_ulpevent_make_adaption_indication(asoc, GFP_ATOMIC);
+ if (asoc->peer.adaptation_ind) {
+ ev = sctp_ulpevent_make_adaptation_indication(asoc, GFP_ATOMIC);
if (!ev)
goto nomem;
}
+/*
+ * Unexpected INIT-ACK handler.
+ *
+ * Section 5.2.3
+ * If an INIT ACK received by an endpoint in any state other than the
+ * COOKIE-WAIT state, the endpoint should discard the INIT ACK chunk.
+ * An unexpected INIT ACK usually indicates the processing of an old or
+ * duplicated INIT chunk.
+*/
+sctp_disposition_t sctp_sf_do_5_2_3_initack(const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type,
+ void *arg, sctp_cmd_seq_t *commands)
+{
+ /* Per the above section, we'll discard the chunk if we have an
+ * endpoint. If this is an OOTB INIT-ACK, treat it as such.
+ */
+ if (ep == sctp_sk((sctp_get_ctl_sock()))->ep)
+ return sctp_sf_ootb(ep, asoc, type, arg, commands);
+ else
+ return sctp_sf_discard_chunk(ep, asoc, type, arg, commands);
+}
/* Unexpected COOKIE-ECHO handler for peer restart (Table 2, action 'A')
*
sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
/* Sockets API Draft Section 5.3.1.6
- * When a peer sends a Adaption Layer Indication parameter , SCTP
+ * When a peer sends a Adaptation Layer Indication parameter , SCTP
* delivers this notification to inform the application that of the
- * peers requested adaption layer.
+ * peers requested adaptation layer.
*/
- if (asoc->peer.adaption_ind) {
- ev = sctp_ulpevent_make_adaption_indication(asoc, GFP_ATOMIC);
+ if (asoc->peer.adaptation_ind) {
+ ev = sctp_ulpevent_make_adaptation_indication(asoc, GFP_ATOMIC);
if (!ev)
goto nomem_ev;
goto nomem;
/* Sockets API Draft Section 5.3.1.6
- * When a peer sends a Adaption Layer Indication parameter,
+ * When a peer sends a Adaptation Layer Indication parameter,
* SCTP delivers this notification to inform the application
- * that of the peers requested adaption layer.
+ * that of the peers requested adaptation layer.
*/
- if (asoc->peer.adaption_ind) {
- ai_ev = sctp_ulpevent_make_adaption_indication(asoc,
+ if (asoc->peer.adaptation_ind) {
+ ai_ev = sctp_ulpevent_make_adaptation_indication(asoc,
GFP_ATOMIC);
if (!ai_ev)
goto nomem;
/* SCTP_STATE_EMPTY */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
- TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ TYPE_SCTP_FUNC(sctp_sf_do_5_2_3_initack), \
/* SCTP_STATE_COOKIE_WAIT */ \
TYPE_SCTP_FUNC(sctp_sf_do_5_1C_ack), \
/* SCTP_STATE_COOKIE_ECHOED */ \
return err;
}
-static int sctp_setsockopt_adaption_layer(struct sock *sk, char __user *optval,
+static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval,
int optlen)
{
- struct sctp_setadaption adaption;
+ struct sctp_setadaptation adaptation;
- if (optlen != sizeof(struct sctp_setadaption))
+ if (optlen != sizeof(struct sctp_setadaptation))
return -EINVAL;
- if (copy_from_user(&adaption, optval, optlen))
+ if (copy_from_user(&adaptation, optval, optlen))
return -EFAULT;
- sctp_sk(sk)->adaption_ind = adaption.ssb_adaption_ind;
+ sctp_sk(sk)->adaptation_ind = adaptation.ssb_adaptation_ind;
return 0;
}
case SCTP_MAXSEG:
retval = sctp_setsockopt_maxseg(sk, optval, optlen);
break;
- case SCTP_ADAPTION_LAYER:
- retval = sctp_setsockopt_adaption_layer(sk, optval, optlen);
+ case SCTP_ADAPTATION_LAYER:
+ retval = sctp_setsockopt_adaptation_layer(sk, optval, optlen);
break;
case SCTP_CONTEXT:
retval = sctp_setsockopt_context(sk, optval, optlen);
/* User specified fragmentation limit. */
sp->user_frag = 0;
- sp->adaption_ind = 0;
+ sp->adaptation_ind = 0;
sp->pf = sctp_get_pf_specific(sk->sk_family);
}
/*
- * 7.1.11 Set Adaption Layer Indicator (SCTP_ADAPTION_LAYER)
+ * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER)
*
- * Requests that the local endpoint set the specified Adaption Layer
+ * Requests that the local endpoint set the specified Adaptation Layer
* Indication parameter for all future INIT and INIT-ACK exchanges.
*/
-static int sctp_getsockopt_adaption_layer(struct sock *sk, int len,
+static int sctp_getsockopt_adaptation_layer(struct sock *sk, int len,
char __user *optval, int __user *optlen)
{
- struct sctp_setadaption adaption;
+ struct sctp_setadaptation adaptation;
- if (len != sizeof(struct sctp_setadaption))
+ if (len != sizeof(struct sctp_setadaptation))
return -EINVAL;
- adaption.ssb_adaption_ind = sctp_sk(sk)->adaption_ind;
- if (copy_to_user(optval, &adaption, len))
+ adaptation.ssb_adaptation_ind = sctp_sk(sk)->adaptation_ind;
+ if (copy_to_user(optval, &adaptation, len))
return -EFAULT;
return 0;
retval = sctp_getsockopt_peer_addr_info(sk, len, optval,
optlen);
break;
- case SCTP_ADAPTION_LAYER:
- retval = sctp_getsockopt_adaption_layer(sk, len, optval,
+ case SCTP_ADAPTATION_LAYER:
+ retval = sctp_getsockopt_adaptation_layer(sk, len, optval,
optlen);
break;
case SCTP_CONTEXT:
return NULL;
}
-/* Create and initialize a SCTP_ADAPTION_INDICATION notification.
+/* Create and initialize a SCTP_ADAPTATION_INDICATION notification.
*
* Socket Extensions for SCTP
- * 5.3.1.6 SCTP_ADAPTION_INDICATION
+ * 5.3.1.6 SCTP_ADAPTATION_INDICATION
*/
-struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication(
+struct sctp_ulpevent *sctp_ulpevent_make_adaptation_indication(
const struct sctp_association *asoc, gfp_t gfp)
{
struct sctp_ulpevent *event;
- struct sctp_adaption_event *sai;
+ struct sctp_adaptation_event *sai;
struct sk_buff *skb;
- event = sctp_ulpevent_new(sizeof(struct sctp_adaption_event),
+ event = sctp_ulpevent_new(sizeof(struct sctp_adaptation_event),
MSG_NOTIFICATION, gfp);
if (!event)
goto fail;
skb = sctp_event2skb(event);
- sai = (struct sctp_adaption_event *)
- skb_put(skb, sizeof(struct sctp_adaption_event));
+ sai = (struct sctp_adaptation_event *)
+ skb_put(skb, sizeof(struct sctp_adaptation_event));
- sai->sai_type = SCTP_ADAPTION_INDICATION;
+ sai->sai_type = SCTP_ADAPTATION_INDICATION;
sai->sai_flags = 0;
- sai->sai_length = sizeof(struct sctp_adaption_event);
- sai->sai_adaption_ind = asoc->peer.adaption_ind;
+ sai->sai_length = sizeof(struct sctp_adaptation_event);
+ sai->sai_adaptation_ind = asoc->peer.adaptation_ind;
sctp_ulpevent_set_owner(event, asoc);
sai->sai_assoc_id = sctp_assoc2id(asoc);
status = gss_mech_register(&gss_spkm3_mech);
if (status)
printk("Failed to register spkm3 gss mechanism!\n");
- return 0;
+ return status;
}
static void __exit cleanup_spkm3_module(void)
/* Set up the call info struct and execute the task */
status = task->tk_status;
- if (status != 0) {
- rpc_release_task(task);
+ if (status != 0)
goto out;
- }
atomic_inc(&task->tk_count);
status = rpc_execute(task);
if (status == 0)
status = task->tk_status;
- rpc_put_task(task);
out:
+ rpc_put_task(task);
rpc_restore_sigmask(&oldset);
return status;
}
if (status == 0)
rpc_execute(task);
else
- rpc_release_task(task);
+ rpc_put_task(task);
rpc_restore_sigmask(&oldset);
return status;
static void __rpc_default_timer(struct rpc_task *task);
static void rpciod_killall(void);
static void rpc_async_schedule(struct work_struct *);
+static void rpc_release_task(struct rpc_task *task);
/*
* RPC tasks sit here while waiting for conditions to improve.
}
EXPORT_SYMBOL(rpc_put_task);
-void rpc_release_task(struct rpc_task *task)
+static void rpc_release_task(struct rpc_task *task)
{
#ifdef RPC_DEBUG
BUG_ON(task->tk_magic != RPC_TASK_MAGIC_ID);
#include <linux/sunrpc/clnt.h>
#define RPCDBG_FACILITY RPCDBG_SVCDSP
-#define RPC_PARANOIA 1
/*
* Mode for mapping cpus to pools.
return 0;
err_short_len:
-#ifdef RPC_PARANOIA
- printk("svc: short len %Zd, dropping request\n", argv->iov_len);
-#endif
+ if (net_ratelimit())
+ printk("svc: short len %Zd, dropping request\n", argv->iov_len);
+
goto dropit; /* drop request */
err_bad_dir:
-#ifdef RPC_PARANOIA
- printk("svc: bad direction %d, dropping request\n", dir);
-#endif
+ if (net_ratelimit())
+ printk("svc: bad direction %d, dropping request\n", dir);
+
serv->sv_stats->rpcbadfmt++;
goto dropit; /* drop request */
goto sendit;
err_bad_vers:
-#ifdef RPC_PARANOIA
- printk("svc: unknown version (%d)\n", vers);
-#endif
+ if (net_ratelimit())
+ printk("svc: unknown version (%d for prog %d, %s)\n",
+ vers, prog, progp->pg_name);
+
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, RPC_PROG_MISMATCH);
svc_putnl(resv, progp->pg_lovers);
goto sendit;
err_bad_proc:
-#ifdef RPC_PARANOIA
- printk("svc: unknown procedure (%d)\n", proc);
-#endif
+ if (net_ratelimit())
+ printk("svc: unknown procedure (%d)\n", proc);
+
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, RPC_PROC_UNAVAIL);
goto sendit;
err_garbage:
-#ifdef RPC_PARANOIA
- printk("svc: failed to decode args\n");
-#endif
+ if (net_ratelimit())
+ printk("svc: failed to decode args\n");
+
rpc_stat = rpc_garbage_args;
err_bad:
serv->sv_stats->rpcbadfmt++;
* bit set in the fragment length header.
* But apparently no known nfs clients send fragmented
* records. */
- printk(KERN_NOTICE "RPC: bad TCP reclen 0x%08lx (non-terminal)\n",
- (unsigned long) svsk->sk_reclen);
+ if (net_ratelimit())
+ printk(KERN_NOTICE "RPC: bad TCP reclen 0x%08lx"
+ " (non-terminal)\n",
+ (unsigned long) svsk->sk_reclen);
goto err_delete;
}
svsk->sk_reclen &= 0x7fffffff;
dprintk("svc: TCP record, %d bytes\n", svsk->sk_reclen);
if (svsk->sk_reclen > serv->sv_max_mesg) {
- printk(KERN_NOTICE "RPC: bad TCP reclen 0x%08lx (large)\n",
- (unsigned long) svsk->sk_reclen);
+ if (net_ratelimit())
+ printk(KERN_NOTICE "RPC: bad TCP reclen 0x%08lx"
+ " (large)\n",
+ (unsigned long) svsk->sk_reclen);
goto err_delete;
}
}
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
rqstp->rq_pages[i] = p;
}
+ rqstp->rq_pages[i++] = NULL; /* this might be seen in nfs_read_actor */
+ BUG_ON(pages >= RPCSVC_MAXPAGES);
/* Make arg->head point to first page and arg->pages point to rest */
arg = &rqstp->rq_arg;
return sk;
}
-void x25_init_timers(struct sock *sk);
-
static int x25_create(struct socket *sock, int protocol)
{
struct sock *sk;
sk_add_backlog(sk, skb);
}
bh_unlock_sock(sk);
+ sock_put(sk);
return queued;
}
* They want reverse charging, we won't accept it.
*/
if ((theirs.reverse & 0x01 ) && (ours->reverse & 0x01)) {
- SOCK_DEBUG(sk, "X.25: rejecting reverse charging request");
+ SOCK_DEBUG(sk, "X.25: rejecting reverse charging request\n");
return -1;
}
if (theirs.throughput) {
if (theirs.throughput < ours->throughput) {
- SOCK_DEBUG(sk, "X.25: throughput negotiated down");
+ SOCK_DEBUG(sk, "X.25: throughput negotiated down\n");
new->throughput = theirs.throughput;
}
}
if (theirs.pacsize_in && theirs.pacsize_out) {
if (theirs.pacsize_in < ours->pacsize_in) {
- SOCK_DEBUG(sk, "X.25: packet size inwards negotiated down");
+ SOCK_DEBUG(sk, "X.25: packet size inwards negotiated down\n");
new->pacsize_in = theirs.pacsize_in;
}
if (theirs.pacsize_out < ours->pacsize_out) {
- SOCK_DEBUG(sk, "X.25: packet size outwards negotiated down");
+ SOCK_DEBUG(sk, "X.25: packet size outwards negotiated down\n");
new->pacsize_out = theirs.pacsize_out;
}
}
if (theirs.winsize_in && theirs.winsize_out) {
if (theirs.winsize_in < ours->winsize_in) {
- SOCK_DEBUG(sk, "X.25: window size inwards negotiated down");
+ SOCK_DEBUG(sk, "X.25: window size inwards negotiated down\n");
new->winsize_in = theirs.winsize_in;
}
if (theirs.winsize_out < ours->winsize_out) {
- SOCK_DEBUG(sk, "X.25: window size outwards negotiated down");
+ SOCK_DEBUG(sk, "X.25: window size outwards negotiated down\n");
new->winsize_out = theirs.winsize_out;
}
}
if (!probe)
break;
- status = crypto_has_alg(name, type, mask | CRYPTO_ALG_ASYNC);
+ status = crypto_has_alg(list[i].name, type,
+ mask | CRYPTO_ALG_ASYNC);
if (!status)
break;
struct xfrm_policy *pol;
struct xfrm_policy *delpol;
struct hlist_head *chain;
- struct hlist_node *entry, *newpos, *last;
+ struct hlist_node *entry, *newpos;
struct dst_entry *gc_list;
write_lock_bh(&xfrm_policy_lock);
chain = policy_hash_bysel(&policy->selector, policy->family, dir);
delpol = NULL;
newpos = NULL;
- last = NULL;
hlist_for_each_entry(pol, entry, chain, bydst) {
- if (!delpol &&
- pol->type == policy->type &&
+ if (pol->type == policy->type &&
!selector_cmp(&pol->selector, &policy->selector) &&
- xfrm_sec_ctx_match(pol->security, policy->security)) {
+ xfrm_sec_ctx_match(pol->security, policy->security) &&
+ !WARN_ON(delpol)) {
if (excl) {
write_unlock_bh(&xfrm_policy_lock);
return -EEXIST;
if (policy->priority > pol->priority)
continue;
} else if (policy->priority >= pol->priority) {
- last = &pol->bydst;
+ newpos = &pol->bydst;
continue;
}
- if (!newpos)
- newpos = &pol->bydst;
if (delpol)
break;
- last = &pol->bydst;
}
- if (!newpos)
- newpos = last;
if (newpos)
hlist_add_after(newpos, &policy->bydst);
else
return NULL;
}
-static int xfrm_add_sa(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_add_sa(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_usersa_info *p = NLMSG_DATA(nlh);
struct xfrm_state *x;
int err;
struct km_event c;
- err = verify_newsa_info(p, (struct rtattr **)xfrma);
+ err = verify_newsa_info(p, xfrma);
if (err)
return err;
- x = xfrm_state_construct(p, (struct rtattr **)xfrma, &err);
+ x = xfrm_state_construct(p, xfrma, &err);
if (!x)
return err;
return x;
}
-static int xfrm_del_sa(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_del_sa(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_state *x;
int err = -ESRCH;
struct km_event c;
struct xfrm_usersa_id *p = NLMSG_DATA(nlh);
- x = xfrm_user_state_lookup(p, (struct rtattr **)xfrma, &err);
+ x = xfrm_user_state_lookup(p, xfrma, &err);
if (x == NULL)
return err;
return skb;
}
-static int xfrm_get_sa(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_get_sa(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_usersa_id *p = NLMSG_DATA(nlh);
struct xfrm_state *x;
struct sk_buff *resp_skb;
int err = -ESRCH;
- x = xfrm_user_state_lookup(p, (struct rtattr **)xfrma, &err);
+ x = xfrm_user_state_lookup(p, xfrma, &err);
if (x == NULL)
goto out_noput;
return 0;
}
-static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_state *x;
struct xfrm_userspi_info *p;
return NULL;
}
-static int xfrm_add_policy(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_add_policy(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_userpolicy_info *p = NLMSG_DATA(nlh);
struct xfrm_policy *xp;
err = verify_newpolicy_info(p);
if (err)
return err;
- err = verify_sec_ctx_len((struct rtattr **)xfrma);
+ err = verify_sec_ctx_len(xfrma);
if (err)
return err;
- xp = xfrm_policy_construct(p, (struct rtattr **)xfrma, &err);
+ xp = xfrm_policy_construct(p, xfrma, &err);
if (!xp)
return err;
return skb;
}
-static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_policy *xp;
struct xfrm_userpolicy_id *p;
p = NLMSG_DATA(nlh);
delete = nlh->nlmsg_type == XFRM_MSG_DELPOLICY;
- err = copy_from_user_policy_type(&type, (struct rtattr **)xfrma);
+ err = copy_from_user_policy_type(&type, xfrma);
if (err)
return err;
if (p->index)
xp = xfrm_policy_byid(type, p->dir, p->index, delete);
else {
- struct rtattr **rtattrs = (struct rtattr **)xfrma;
- struct rtattr *rt = rtattrs[XFRMA_SEC_CTX-1];
+ struct rtattr *rt = xfrma[XFRMA_SEC_CTX-1];
struct xfrm_policy tmp;
- err = verify_sec_ctx_len(rtattrs);
+ err = verify_sec_ctx_len(xfrma);
if (err)
return err;
return err;
}
-static int xfrm_flush_sa(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_flush_sa(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct km_event c;
struct xfrm_usersa_flush *p = NLMSG_DATA(nlh);
return -1;
}
-static int xfrm_get_ae(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_get_ae(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_state *x;
struct sk_buff *r_skb;
return err;
}
-static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_state *x;
struct km_event c;
goto out;
spin_lock_bh(&x->lock);
- err = xfrm_update_ae_params(x,(struct rtattr **)xfrma);
+ err = xfrm_update_ae_params(x, xfrma);
spin_unlock_bh(&x->lock);
if (err < 0)
goto out;
return err;
}
-static int xfrm_flush_policy(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_flush_policy(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct km_event c;
u8 type = XFRM_POLICY_TYPE_MAIN;
int err;
struct xfrm_audit audit_info;
- err = copy_from_user_policy_type(&type, (struct rtattr **)xfrma);
+ err = copy_from_user_policy_type(&type, xfrma);
if (err)
return err;
return 0;
}
-static int xfrm_add_pol_expire(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_add_pol_expire(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_policy *xp;
struct xfrm_user_polexpire *up = NLMSG_DATA(nlh);
u8 type = XFRM_POLICY_TYPE_MAIN;
int err = -ENOENT;
- err = copy_from_user_policy_type(&type, (struct rtattr **)xfrma);
+ err = copy_from_user_policy_type(&type, xfrma);
if (err)
return err;
if (p->index)
xp = xfrm_policy_byid(type, p->dir, p->index, 0);
else {
- struct rtattr **rtattrs = (struct rtattr **)xfrma;
- struct rtattr *rt = rtattrs[XFRMA_SEC_CTX-1];
+ struct rtattr *rt = xfrma[XFRMA_SEC_CTX-1];
struct xfrm_policy tmp;
- err = verify_sec_ctx_len(rtattrs);
+ err = verify_sec_ctx_len(xfrma);
if (err)
return err;
return err;
}
-static int xfrm_add_sa_expire(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_add_sa_expire(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_state *x;
int err;
return err;
}
-static int xfrm_add_acquire(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma)
+static int xfrm_add_acquire(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct rtattr **xfrma)
{
struct xfrm_policy *xp;
struct xfrm_user_tmpl *ut;
#undef XMSGSIZE
static struct xfrm_link {
- int (*doit)(struct sk_buff *, struct nlmsghdr *, void **);
+ int (*doit)(struct sk_buff *, struct nlmsghdr *, struct rtattr **);
int (*dump)(struct sk_buff *, struct netlink_callback *);
} xfrm_dispatch[XFRM_NR_MSGTYPES] = {
[XFRM_MSG_NEWSA - XFRM_MSG_BASE] = { .doit = xfrm_add_sa },
if (link->doit == NULL)
goto err_einval;
- *errp = link->doit(skb, nlh, (void **) &xfrma);
+ *errp = link->doit(skb, nlh, xfrma);
return *errp;
}
ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
- : Parent(parent, name), menu(0)
+ : Parent(parent, name), menu(0), sym(0)
{
if (name) {
configSettings->beginGroup(name);
if (menu == m)
return;
menu = m;
+ sym = NULL;
if (!menu)
clear();
else
my $param = shift;
my $type = shift;
my $file = shift;
+ my $anon = 0;
my $param_name = $param;
$param_name =~ s/\[.*//;
$param="void";
$parameterdescs{void} = "no arguments";
}
+ elsif ($type eq "" && ($param eq "struct" or $param eq "union"))
+ # handle unnamed (anonymous) union or struct:
+ {
+ $type = $param;
+ $param = "{unnamed_" . $param. "}";
+ $parameterdescs{$param} = "anonymous\n";
+ $anon = 1;
+ }
+
# warn if parameter has no description
- # (but ignore ones starting with # as these are no parameters
- # but inline preprocessor statements
+ # (but ignore ones starting with # as these are not parameters
+ # but inline preprocessor statements);
+ # also ignore unnamed structs/unions;
+ if (!$anon) {
if (!defined $parameterdescs{$param_name} && $param_name !~ /^#/) {
$parameterdescs{$param_name} = $undescribed;
" No description found for parameter '$param'\n";
++$warnings;
}
+ }
push @parameterlist, $param;
$parametertypes{$param} = $type;
* tosec = .init.text | .exit.text | .init.data
* fromsec = .data
* atsym = *driver, *_template, *_sht, *_ops, *_probe, *probe_one
+ *
+ * Pattern 3:
+ * Some symbols belong to init section but still it is ok to reference
+ * these from non-init sections as these symbols don't have any memory
+ * allocated for them and symbol address and value are same. So even
+ * if init section is freed, its ok to reference those symbols.
+ * For ex. symbols marking the init section boundaries.
+ * This pattern is identified by
+ * refsymname = __init_begin, _sinittext, _einittext
**/
static int secref_whitelist(const char *modname, const char *tosec,
- const char *fromsec, const char *atsym)
+ const char *fromsec, const char *atsym,
+ const char *refsymname)
{
int f1 = 1, f2 = 1;
const char **s;
"_ops",
"_probe",
"_probe_one",
+ "_console",
+ NULL
+ };
+
+ const char *pat3refsym[] = {
+ "__init_begin",
+ "_sinittext",
+ "_einittext",
NULL
};
if ((strcmp(fromsec, ".pci_fixup") == 0) &&
(strcmp(tosec, ".init.text") == 0))
return 1;
+
+ /* Check for pattern 3 */
+ for (s = pat3refsym; *s; s++)
+ if (strcmp(refsymname, *s) == 0)
+ return 1;
}
return 0;
}
/* check whitelist - we may ignore it */
if (before &&
secref_whitelist(modname, secname, fromsec,
- elf->strtab + before->st_name))
+ elf->strtab + before->st_name, refsymname))
return;
if (before && after) {
int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
struct avc_audit_data *ad, u8 proto);
int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall);
+
+static inline void selinux_xfrm_notify_policyload(void)
+{
+ atomic_inc(&flow_cache_genid);
+}
#else
static inline int selinux_xfrm_sock_rcv_skb(u32 isec_sid, struct sk_buff *skb,
struct avc_audit_data *ad)
*sid = SECSID_NULL;
return 0;
}
+
+static inline void selinux_xfrm_notify_policyload(void)
+{
+}
#endif
static inline void selinux_skb_xfrm_sid(struct sk_buff *skb, u32 *sid)
return rc;
}
+/*
+ * Sets both levels in the MLS range of 'dst' to the low level of 'src'.
+ */
+static inline int mls_context_cpy_low(struct context *dst, struct context *src)
+{
+ int rc;
+
+ if (!selinux_mls_enabled)
+ return 0;
+
+ dst->range.level[0].sens = src->range.level[0].sens;
+ rc = ebitmap_cpy(&dst->range.level[0].cat, &src->range.level[0].cat);
+ if (rc)
+ goto out;
+
+ dst->range.level[1].sens = src->range.level[0].sens;
+ rc = ebitmap_cpy(&dst->range.level[1].cat, &src->range.level[0].cat);
+ if (rc)
+ ebitmap_destroy(&dst->range.level[0].cat);
+out:
+ return rc;
+}
+
static inline int mls_context_cmp(struct context *c1, struct context *c2)
{
if (!selinux_mls_enabled)
if (!defcon)
goto out;
- rc = mls_copy_context(context, defcon);
+ rc = mls_context_cpy(context, defcon);
goto out;
}
return rc;
}
-/*
- * Copies the effective MLS range from `src' into `dst'.
- */
-static inline int mls_scopy_context(struct context *dst,
- struct context *src)
-{
- int l, rc = 0;
-
- /* Copy the MLS range from the source context */
- for (l = 0; l < 2; l++) {
- dst->range.level[l].sens = src->range.level[0].sens;
- rc = ebitmap_cpy(&dst->range.level[l].cat,
- &src->range.level[0].cat);
- if (rc)
- break;
- }
-
- return rc;
-}
-
/*
* Copies the MLS range `range' into `context'.
*/
case AVTAB_CHANGE:
if (tclass == SECCLASS_PROCESS)
/* Use the process MLS attributes. */
- return mls_copy_context(newcontext, scontext);
+ return mls_context_cpy(newcontext, scontext);
else
/* Use the process effective MLS attributes. */
- return mls_scopy_context(newcontext, scontext);
+ return mls_context_cpy_low(newcontext, scontext);
case AVTAB_MEMBER:
/* Only polyinstantiate the MLS attributes if
the type is being polyinstantiated */
if (newcontext->type != tcontext->type) {
/* Use the process effective MLS attributes. */
- return mls_scopy_context(newcontext, scontext);
+ return mls_context_cpy_low(newcontext, scontext);
} else {
/* Use the related object MLS attributes. */
- return mls_copy_context(newcontext, tcontext);
+ return mls_context_cpy(newcontext, tcontext);
}
default:
return -EINVAL;
#include "context.h"
#include "policydb.h"
-/*
- * Copies the MLS range from `src' into `dst'.
- */
-static inline int mls_copy_context(struct context *dst,
- struct context *src)
-{
- int l, rc = 0;
-
- /* Copy the MLS range from the source context */
- for (l = 0; l < 2; l++) {
- dst->range.level[l].sens = src->range.level[l].sens;
- rc = ebitmap_cpy(&dst->range.level[l].cat,
- &src->range.level[l].cat);
- if (rc)
- break;
- }
-
- return rc;
-}
-
int mls_compute_context_len(struct context *context);
void mls_sid_to_context(struct context *context, char **scontext);
int mls_context_isvalid(struct policydb *p, struct context *c);
avc_ss_reset(seqno);
selnl_notify_policyload(seqno);
selinux_netlbl_cache_invalidate();
+ selinux_xfrm_notify_policyload();
return 0;
}
avc_ss_reset(seqno);
selnl_notify_policyload(seqno);
selinux_netlbl_cache_invalidate();
+ selinux_xfrm_notify_policyload();
return 0;
if (!rc) {
avc_ss_reset(seqno);
selnl_notify_policyload(seqno);
+ selinux_xfrm_notify_policyload();
}
return rc;
}
newcon.user = context1->user;
newcon.role = context1->role;
newcon.type = context1->type;
- rc = mls_copy_context(&newcon, context2);
+ rc = mls_context_cpy(&newcon, context2);
if (rc)
goto out_unlock;
-
/* Check the validity of the new context. */
if (!policydb_context_isvalid(&policydb, &newcon)) {
rc = convert_context_handle_invalid_context(&newcon);
rc = netlbl_socket_setattr(sock, &secattr);
if (rc == 0) {
- spin_lock(&sksec->nlbl_lock);
+ spin_lock_bh(&sksec->nlbl_lock);
sksec->nlbl_state = NLBL_LABELED;
- spin_unlock(&sksec->nlbl_lock);
+ spin_unlock_bh(&sksec->nlbl_lock);
}
netlbl_socket_setsid_return:
rcu_read_unlock();
return 0;
}
- lock_sock(sock->sk);
+ local_bh_disable();
+ bh_lock_sock_nested(sock->sk);
rc = selinux_netlbl_socket_setsid(sock, sksec->sid);
- release_sock(sock->sk);
+ bh_unlock_sock(sock->sk);
+ local_bh_enable();
rcu_read_unlock();
return rc;
#define __SND_AOA_CODEC_ONYX_H
#include <stddef.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <asm/pmac_low_i2c.h>
#include <asm/prom.h>
*/
#include <stddef.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <asm/pmac_low_i2c.h>
#include <asm/prom.h>
#include <linux/delay.h>
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
if (signal_pending(current))
- return result > 0 ? result : -ERESTARTSYS;
+ return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
}
kev = snd_kctl_event(ctl->events.next);
snd_printk(KERN_WARNING "unable to free card info\n");
/* Not fatal error */
}
- if (card->dev)
- device_unregister(card->dev);
+#ifndef CONFIG_SYSFS_DEPRECATED
+ if (card->card_dev)
+ device_unregister(card->card_dev);
+#endif
kfree(card);
return 0;
}
int err;
snd_assert(card != NULL, return -EINVAL);
- if (!card->dev) {
- card->dev = device_create(sound_class, card->parent, 0,
- "card%i", card->number);
- if (IS_ERR(card->dev))
- card->dev = NULL;
+#ifndef CONFIG_SYSFS_DEPRECATED
+ if (!card->card_dev) {
+ card->card_dev = device_create(sound_class, card->dev, 0,
+ "card%i", card->number);
+ if (IS_ERR(card->card_dev))
+ card->card_dev = NULL;
}
+#endif
if ((err = snd_device_register_all(card)) < 0)
return err;
mutex_lock(&snd_card_mutex);
struct snd_mask sformat_mask;
struct snd_mask mask;
+ if (mutex_lock_interruptible(&runtime->oss.params_lock))
+ return -EINTR;
sw_params = kmalloc(sizeof(*sw_params), GFP_KERNEL);
params = kmalloc(sizeof(*params), GFP_KERNEL);
sparams = kmalloc(sizeof(*sparams), GFP_KERNEL);
kfree(sw_params);
kfree(params);
kfree(sparams);
+ mutex_unlock(&runtime->oss.params_lock);
return err;
}
if ((tmp = snd_pcm_oss_make_ready(substream)) < 0)
return tmp;
+ mutex_lock(&runtime->oss.params_lock);
while (bytes > 0) {
if (bytes < runtime->oss.period_bytes || runtime->oss.buffer_used > 0) {
tmp = bytes;
if (tmp + runtime->oss.buffer_used > runtime->oss.period_bytes)
tmp = runtime->oss.period_bytes - runtime->oss.buffer_used;
if (tmp > 0) {
- if (copy_from_user(runtime->oss.buffer + runtime->oss.buffer_used, buf, tmp))
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : -EFAULT;
+ if (copy_from_user(runtime->oss.buffer + runtime->oss.buffer_used, buf, tmp)) {
+ tmp = -EFAULT;
+ goto err;
+ }
}
runtime->oss.buffer_used += tmp;
buf += tmp;
tmp = snd_pcm_oss_write2(substream, runtime->oss.buffer + runtime->oss.period_ptr,
runtime->oss.buffer_used - runtime->oss.period_ptr, 1);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
runtime->oss.period_ptr += tmp;
runtime->oss.period_ptr %= runtime->oss.period_bytes;
if (runtime->oss.period_ptr == 0 ||
runtime->oss.period_ptr == runtime->oss.buffer_used)
runtime->oss.buffer_used = 0;
- else if ((substream->f_flags & O_NONBLOCK) != 0)
- return xfer > 0 ? xfer : -EAGAIN;
+ else if ((substream->f_flags & O_NONBLOCK) != 0) {
+ tmp = -EAGAIN;
+ goto err;
+ }
}
} else {
tmp = snd_pcm_oss_write2(substream,
(const char __force *)buf,
runtime->oss.period_bytes, 0);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
buf += tmp;
bytes -= tmp;
break;
}
}
+ mutex_unlock(&runtime->oss.params_lock);
return xfer;
+
+ err:
+ mutex_unlock(&runtime->oss.params_lock);
+ return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
}
static ssize_t snd_pcm_oss_read2(struct snd_pcm_substream *substream, char *buf, size_t bytes, int in_kernel)
if ((tmp = snd_pcm_oss_make_ready(substream)) < 0)
return tmp;
+ mutex_lock(&runtime->oss.params_lock);
while (bytes > 0) {
if (bytes < runtime->oss.period_bytes || runtime->oss.buffer_used > 0) {
if (runtime->oss.buffer_used == 0) {
tmp = snd_pcm_oss_read2(substream, runtime->oss.buffer, runtime->oss.period_bytes, 1);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
runtime->oss.period_ptr = tmp;
runtime->oss.buffer_used = tmp;
tmp = bytes;
if ((size_t) tmp > runtime->oss.buffer_used)
tmp = runtime->oss.buffer_used;
- if (copy_to_user(buf, runtime->oss.buffer + (runtime->oss.period_ptr - runtime->oss.buffer_used), tmp))
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : -EFAULT;
+ if (copy_to_user(buf, runtime->oss.buffer + (runtime->oss.period_ptr - runtime->oss.buffer_used), tmp)) {
+ tmp = -EFAULT;
+ goto err;
+ }
buf += tmp;
bytes -= tmp;
xfer += tmp;
tmp = snd_pcm_oss_read2(substream, (char __force *)buf,
runtime->oss.period_bytes, 0);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
buf += tmp;
bytes -= tmp;
xfer += tmp;
}
}
+ mutex_unlock(&runtime->oss.params_lock);
return xfer;
+
+ err:
+ mutex_unlock(&runtime->oss.params_lock);
+ return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
}
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
return err;
format = snd_pcm_oss_format_from(runtime->oss.format);
width = snd_pcm_format_physical_width(format);
+ mutex_lock(&runtime->oss.params_lock);
if (runtime->oss.buffer_used > 0) {
#ifdef OSS_DEBUG
printk("sync: buffer_used\n");
runtime->oss.buffer + runtime->oss.buffer_used,
size);
err = snd_pcm_oss_sync1(substream, runtime->oss.period_bytes);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&runtime->oss.params_lock);
return err;
+ }
} else if (runtime->oss.period_ptr > 0) {
#ifdef OSS_DEBUG
printk("sync: period_ptr\n");
runtime->oss.buffer,
size * 8 / width);
err = snd_pcm_oss_sync1(substream, size);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&runtime->oss.params_lock);
return err;
+ }
}
/*
* The ALSA's period might be a bit large than OSS one.
snd_pcm_lib_writev(substream, buffers, size);
}
}
+ mutex_unlock(&runtime->oss.params_lock);
/*
* finish sync: drain the buffer
*/
runtime->oss.params = 1;
runtime->oss.trigger = 1;
runtime->oss.rate = 8000;
+ mutex_init(&runtime->oss.params_lock);
switch (SNDRV_MINOR_OSS_DEVICE(minor)) {
case SNDRV_MINOR_OSS_PCM_8:
runtime->oss.format = AFMT_U8;
err = snd_pcm_substream_proc_init(substream);
if (err < 0) {
snd_printk(KERN_ERR "Error in snd_pcm_stream_proc_init\n");
+ if (prev == NULL)
+ pstr->substream = NULL;
+ else
+ prev->next = NULL;
kfree(substream);
return err;
}
runtime->silence_filled -= frames;
if ((snd_pcm_sframes_t)runtime->silence_filled < 0) {
runtime->silence_filled = 0;
- runtime->silence_start = (ofs + frames) - runtime->buffer_size;
+ runtime->silence_start = new_hw_ptr;
} else {
- runtime->silence_start = ofs - runtime->silence_filled;
+ runtime->silence_start = ofs;
}
- if ((snd_pcm_sframes_t)runtime->silence_start < 0)
- runtime->silence_start += runtime->boundary;
}
frames = runtime->buffer_size - runtime->silence_filled;
}
snd_assert(frames <= runtime->buffer_size, return);
if (frames == 0)
return;
- ofs = (runtime->silence_start + runtime->silence_filled) % runtime->buffer_size;
+ ofs = runtime->silence_start % runtime->buffer_size;
while (frames > 0) {
transfer = ofs + frames > runtime->buffer_size ? runtime->buffer_size - ofs : frames;
if (runtime->access == SNDRV_PCM_ACCESS_RW_INTERLEAVED ||
struct snd_rawmidi_substream *substream;
int idx;
- INIT_LIST_HEAD(&stream->substreams);
for (idx = 0; idx < count; idx++) {
substream = kzalloc(sizeof(*substream), GFP_KERNEL);
if (substream == NULL) {
rmidi->device = device;
mutex_init(&rmidi->open_mutex);
init_waitqueue_head(&rmidi->open_wait);
+ INIT_LIST_HEAD(&rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substreams);
+ INIT_LIST_HEAD(&rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams);
+
if (id != NULL)
strlcpy(rmidi->id, id, sizeof(rmidi->id));
if ((err = snd_rawmidi_alloc_substreams(rmidi,
return len;
newlen = len;
if (size_aligned > 0)
- newlen = ((len + size_aligned - 1) / size_aligned) * size_aligned;
+ newlen = roundup(len, size_aligned);
if (count < newlen)
return -EAGAIN;
/* table entries are align to 32 */
#define SGBUF_TBL_ALIGN 32
-#define sgbuf_align_table(tbl) ((((tbl) + SGBUF_TBL_ALIGN - 1) / SGBUF_TBL_ALIGN) * SGBUF_TBL_ALIGN)
+#define sgbuf_align_table(tbl) ALIGN((tbl), SGBUF_TBL_ALIGN)
int snd_free_sgbuf_pages(struct snd_dma_buffer *dmab)
{
{
int minor;
struct snd_minor *preg;
- struct device *device = NULL;
+ struct device *device = snd_card_get_device_link(card);
snd_assert(name, return -EINVAL);
preg = kmalloc(sizeof *preg, GFP_KERNEL);
return minor;
}
snd_minors[minor] = preg;
- if (card)
- device = card->dev;
preg->dev = device_create(sound_class, device, MKDEV(major, minor),
"%s", name);
if (preg->dev)
int cidx = SNDRV_MINOR_OSS_CARD(minor);
int track2 = -1;
int register1 = -1, register2 = -1;
- struct device *carddev = NULL;
+ struct device *carddev = snd_card_get_device_link(card);
if (card && card->number >= 8)
return 0; /* ignore silently */
track2 = SNDRV_MINOR_OSS(cidx, SNDRV_MINOR_OSS_DMMIDI1);
break;
}
- if (card)
- carddev = card->dev;
register1 = register_sound_special_device(f_ops, minor, carddev);
if (register1 != minor)
goto __end;
struct snd_gf1_mem_block *pblock;
unsigned int ptr1, ptr2;
- align--;
- if (w_16 && align < 1)
- align = 1;
+ if (w_16 && align < 2)
+ align = 2;
block->flags = w_16 ? SNDRV_GF1_MEM_BLOCK_16BIT : 0;
block->owner = SNDRV_GF1_MEM_OWNER_DRIVER;
block->share = 0;
if (pblock->next->ptr < boundary)
ptr2 = pblock->next->ptr;
}
- ptr1 = (pblock->ptr + pblock->size + align) & ~align;
+ ptr1 = ALIGN(pblock->ptr + pblock->size, align);
if (ptr1 >= ptr2)
continue;
size1 = ptr2 - ptr1;
chip->port = port;
if (request_irq(irq, irq_handler, hardware == SB_HW_ALS4000 ?
- IRQF_DISABLED | IRQF_SHARED : IRQF_DISABLED,
+ IRQF_SHARED : IRQF_DISABLED,
"SoundBlaster", (void *) chip)) {
snd_printk(KERN_ERR "sb: can't grab irq %d\n", irq);
snd_sbdsp_free(chip);
blocksize = max_blksize;
} else {
/* round to nearest 16-byte value */
- blocksize = ((length-written+7)&~0x7);
+ blocksize = ALIGN(length - written, 8);
}
if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_BLOCK, NULL, NULL)) {
{ 0x434d4941, 0xffffffff, "CMI9738", patch_cm9738, NULL },
{ 0x434d4961, 0xffffffff, "CMI9739", patch_cm9739, NULL },
{ 0x434d4969, 0xffffffff, "CMI9780", patch_cm9780, NULL },
-{ 0x434d4978, 0xffffffff, "CMI9761", patch_cm9761, NULL },
-{ 0x434d4982, 0xffffffff, "CMI9761", patch_cm9761, NULL },
-{ 0x434d4983, 0xffffffff, "CMI9761", patch_cm9761, NULL },
+{ 0x434d4978, 0xffffffff, "CMI9761A", patch_cm9761, NULL },
+{ 0x434d4982, 0xffffffff, "CMI9761B", patch_cm9761, NULL },
+{ 0x434d4983, 0xffffffff, "CMI9761A+", patch_cm9761, NULL },
{ 0x43525900, 0xfffffff8, "CS4297", NULL, NULL },
{ 0x43525910, 0xfffffff8, "CS4297A", patch_cirrus_spdif, NULL },
{ 0x43525920, 0xfffffff8, "CS4298", patch_cirrus_spdif, NULL },
unsigned short old, new;
old = snd_ac97_read_cache(ac97, reg);
- new = (old & ~mask) | value;
+ new = (old & ~mask) | (value & mask);
change = old != new;
if (change) {
ac97->regs[reg] = new;
mutex_lock(&ac97->page_mutex);
old = ac97->spec.ad18xx.pcmreg[codec];
- new = (old & ~mask) | value;
+ new = (old & ~mask) | (value & mask);
change = old != new;
if (change) {
mutex_lock(&ac97->reg_mutex);
snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0002); // ID1C
ac97->spec.ad18xx.codec_cfg[unchained_idx] = 0x0002;
if (cidx1 >= 0) {
- if (patch_ad1881_chained1(ac97, cidx1, 0x0006)) // SDIE | ID1C
+ if (cidx2 < 0)
+ patch_ad1881_chained1(ac97, cidx1, 0);
+ else if (patch_ad1881_chained1(ac97, cidx1, 0x0006)) // SDIE | ID1C
patch_ad1881_chained1(ac97, cidx2, 0);
else if (patch_ad1881_chained1(ac97, cidx2, 0x0006)) // SDIE | ID1C
patch_ad1881_chained1(ac97, cidx1, 0);
else { /* ALC655 */
if (ac97->subsystem_vendor == 0x1462 &&
(ac97->subsystem_device == 0x0131 || /* MSI S270 laptop */
- ac97->subsystem_device == 0x0161)) /* LG K1 Express */
+ ac97->subsystem_device == 0x0161 || /* LG K1 Express */
+ ac97->subsystem_device == 0x0351)) /* MSI L725 laptop */
val &= ~(1 << 1); /* Pin 47 is EAPD (for internal speaker) */
else
val |= (1 << 1); /* Pin 47 is spdif input pin */
synchronize_irq(chip->irq);
if (chip->irq >= 0)
- free_irq(chip->irq, (void*)chip);
+ free_irq(chip->irq, chip);
skip_hw:
if (chip->iobase)
spin_lock_init(&chip->lock); /* only now can we call ad1889_free */
if (request_irq(pci->irq, snd_ad1889_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->driver, (void*)chip)) {
+ IRQF_SHARED, card->driver, chip)) {
printk(KERN_ERR PFX "cannot obtain IRQ %d\n", pci->irq);
snd_ad1889_free(chip);
return -EBUSY;
snd_ali_disable_address_interrupt(codec);
if (codec->irq >= 0) {
synchronize_irq(codec->irq);
- free_irq(codec->irq, (void *)codec);
+ free_irq(codec->irq, codec);
}
if (codec->port)
pci_release_regions(codec->pci);
return err;
codec->port = pci_resource_start(codec->pci, 0);
- if (request_irq(codec->pci->irq, snd_ali_card_interrupt, IRQF_DISABLED|IRQF_SHARED, "ALI 5451", (void *)codec)) {
+ if (request_irq(codec->pci->irq, snd_ali_card_interrupt,
+ IRQF_SHARED, "ALI 5451", codec)) {
snd_printk(KERN_ERR "Unable to request irq.\n");
return -EBUSY;
}
snd_als300_dbgcallenter();
snd_als300_set_irq_flag(chip, IRQ_DISABLE);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip);
else
irq_handler = snd_als300_interrupt;
- if (request_irq(pci->irq, irq_handler, IRQF_DISABLED|IRQF_SHARED,
- card->shortname, (void *)chip)) {
+ if (request_irq(pci->irq, irq_handler, IRQF_SHARED,
+ card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_als300_free(chip);
return -EBUSY;
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
}
if ((err = request_irq(pci->irq, vortex_interrupt,
- IRQF_DISABLED | IRQF_SHARED, CARD_NAME_SHORT,
+ IRQF_SHARED, CARD_NAME_SHORT,
chip)) != 0) {
printk(KERN_ERR "cannot grab irq\n");
goto irq_out;
__end_hw:
snd_azf3328_free_joystick(chip);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
chip->synth_port = pci_resource_start(pci, 3);
chip->mixer_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_azf3328_interrupt, IRQF_DISABLED|IRQF_SHARED, card->shortname, (void *)chip)) {
+ if (request_irq(pci->irq, snd_azf3328_interrupt,
+ IRQF_SHARED, card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto out_err;
SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
128 * 1024,
- (255 * 4092 + 1023) & ~1023);
+ ALIGN(255 * 4092, 1024));
}
static int __devinit snd_bt87x_create(struct snd_card *card,
snd_bt87x_writel(chip, REG_INT_MASK, 0);
snd_bt87x_writel(chip, REG_INT_STAT, MY_INTERRUPTS);
- if (request_irq(pci->irq, snd_bt87x_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ if (request_irq(pci->irq, snd_bt87x_interrupt, IRQF_SHARED,
"Bt87x audio", chip)) {
snd_bt87x_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
struct resource *res_port;
int irq;
- unsigned int revision; /* chip revision */
+ unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static uint subsystem[SNDRV_CARDS]; /* Force card subsystem model */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the CA0106 soundcard.");
MODULE_PARM_DESC(id, "ID string for the CA0106 soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable the CA0106 soundcard.");
+module_param_array(subsystem, uint, NULL, 0444);
+MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
#include "ca0106.h"
.gpio_type = 1,
.i2c_adc = 1,
.spi_dac = 1 } ,
+ /* New Audigy LS. Has a different DAC. */
+ /* SB0570:
+ * CTRL:CA0106-DAT
+ * ADC: WM8775EDS
+ * DAC: WM8768GEDS
+ */
+ { .serial = 0x10111102,
+ .name = "Audigy SE OEM [SB0570a]",
+ .gpio_type = 1,
+ .i2c_adc = 1,
+ .spi_dac = 1 } ,
/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */
/* SB0438
* CTRL:CA0106-DAT
// release the irq
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_disable_device(chip->pci);
kfree(chip);
return 0;
{ 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */
};
-static int __devinit snd_ca0106_create(struct snd_card *card,
+static int __devinit snd_ca0106_create(int dev, struct snd_card *card,
struct pci_dev *pci,
struct snd_ca0106 **rchip)
{
}
if (request_irq(pci->irq, snd_ca0106_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "snd_ca0106",
- (void *)chip)) {
+ IRQF_SHARED, "snd_ca0106", chip)) {
snd_ca0106_free(chip);
printk(KERN_ERR "cannot grab irq\n");
return -EBUSY;
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, (char *)&chip->revision);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
#if 1
- printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
+ printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n", chip->model,
chip->revision, chip->serial);
#endif
strcpy(card->driver, "CA0106");
strcpy(card->shortname, "CA0106");
for (c = ca0106_chip_details; c->serial; c++) {
- if (c->serial == chip->serial)
+ if (subsystem[dev]) {
+ if (c->serial == subsystem[dev])
+ break;
+ } else if (c->serial == chip->serial)
break;
}
chip->details = c;
+ if (subsystem[dev]) {
+ printk(KERN_INFO "snd-ca0106: Sound card name=%s, subsystem=0x%x. Forced to subsystem=0x%x\n",
+ c->name, chip->serial, subsystem[dev]);
+ }
+
sprintf(card->longname, "%s at 0x%lx irq %i",
c->name, chip->port, chip->irq);
if (card == NULL)
return -ENOMEM;
- if ((err = snd_ca0106_create(card, pci, &chip)) < 0) {
+ if ((err = snd_ca0106_create(dev, card, pci, &chip)) < 0) {
snd_card_free(card);
return err;
}
val = inb(cm->iobase + args->reg);
else
val = snd_cmipci_read(cm, args->reg);
- change = (val & args->mask) != (ucontrol->value.integer.value[0] ? args->mask : 0);
+ change = (val & args->mask) != (ucontrol->value.integer.value[0] ?
+ args->mask_on : (args->mask & ~args->mask_on));
if (change) {
val &= ~args->mask;
if (ucontrol->value.integer.value[0])
cm->iobase = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cmipci_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->driver, cm)) {
+ IRQF_SHARED, card->driver, cm)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cmipci_free(cm);
return -EBUSY;
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_cs4281_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_cs4281_interrupt, IRQF_SHARED,
"CS4281", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs4281_free(chip);
}
}
- if (request_irq(pci->irq, snd_cs46xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_cs46xx_interrupt, IRQF_SHARED,
"CS46XX", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs46xx_free(chip);
cs5535au->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cs5535audio_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "CS5535 Audio", cs5535au)) {
+ IRQF_SHARED, "CS5535 Audio", cs5535au)) {
snd_printk("unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto sndfail;
DE_INIT(("Stopped.\n"));
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
if (chip->dsp_registers)
iounmap(chip->dsp_registers);
chip->dsp_registers = (volatile u32 __iomem *)
ioremap_nocache(chip->dsp_registers_phys, sz);
- if (request_irq(pci->irq, snd_echo_interrupt, IRQF_DISABLED | IRQF_SHARED,
- ECHOCARD_NAME, (void *)chip)) {
+ if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
+ ECHOCARD_NAME, chip)) {
snd_echo_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
return -EBUSY;
sent = bytes = 0;
spin_lock_irqsave(&chip->lock, flags);
chip->midi_full = 0;
- if (chip->midi_out && !snd_rawmidi_transmit_empty(chip->midi_out)) {
+ if (!snd_rawmidi_transmit_empty(chip->midi_out)) {
bytes = snd_rawmidi_transmit_peek(chip->midi_out, buf,
MIDI_OUT_BUFFER_SIZE - 1);
DE_MID(("Try to send %d bytes...\n", bytes));
}
} else {
if (chip->tinuse) {
- del_timer(&chip->timer);
chip->tinuse = 0;
+ spin_unlock_irq(&chip->lock);
+ del_timer_sync(&chip->timer);
DE_MID(("Timer removed\n"));
+ return;
}
}
spin_unlock_irq(&chip->lock);
free_pm_buffer(emu);
#endif
if (emu->irq >= 0)
- free_irq(emu->irq, (void *)emu);
+ free_irq(emu->irq, emu);
if (emu->port)
pci_release_regions(emu->pci);
if (emu->card_capabilities->ca0151_chip) /* P16V */
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_DISABLED|IRQF_SHARED, "EMU10K1", (void *)emu)) {
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+ "EMU10K1", emu)) {
err = -EBUSY;
goto error;
}
struct resource *res_port;
int irq;
- unsigned int revision; /* chip revision */
+ unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
// release the irq
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
// release the DMA
if (chip->dma_buffer.area) {
}
if (request_irq(pci->irq, snd_emu10k1x_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "EMU10K1X",
- (void *)chip)) {
+ IRQF_SHARED, "EMU10K1X", chip)) {
snd_printk(KERN_ERR "emu10k1x: cannot grab irq %d\n", pci->irq);
snd_emu10k1x_free(chip);
return -EBUSY;
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, (char *)&chip->revision);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
snd_printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
return err;
}
ensoniq->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_audiopci_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_audiopci_interrupt, IRQF_SHARED,
"Ensoniq AudioPCI", ensoniq)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ensoniq_free(ensoniq);
}
if (request_irq(pci->irq, snd_es1938_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "ES1938", chip)) {
+ IRQF_SHARED, "ES1938", chip)) {
printk(KERN_ERR "es1938: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
chip->vc_port = pci_resource_start(pci, 2);
chip->mpu_port = pci_resource_start(pci, 3);
chip->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_SHARED,
"ES1938", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1938_free(chip);
struct esm_memory *buf;
struct list_head *p;
- size = ((size + ESM_MEM_ALIGN - 1) / ESM_MEM_ALIGN) * ESM_MEM_ALIGN;
+ size = ALIGN(size, ESM_MEM_ALIGN);
mutex_lock(&chip->memory_mutex);
list_for_each(p, &chip->buf_list) {
buf = list_entry(p, struct esm_memory, list);
}
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
snd_es1968_free_gameport(chip);
chip->master_switch = NULL;
chip->master_volume = NULL;
return err;
}
chip->io_port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_es1968_interrupt, IRQF_DISABLED|IRQF_SHARED,
- "ESS Maestro", (void*)chip)) {
+ if (request_irq(pci->irq, snd_es1968_interrupt, IRQF_SHARED,
+ "ESS Maestro", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1968_free(chip);
return -EBUSY;
}
chip->port = pci_resource_start(pci, 0);
if ((tea575x_tuner & 0x0010) == 0) {
- if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_SHARED,
"FM801", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->irq);
snd_fm801_free(chip);
{ 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */
{ 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */
- /* not autodetected value */
- { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */
-
{ 0 } /* terminator */
};
return "Front Aux";
return "Aux";
case AC_JACK_MIC_IN:
- if (node->pin_caps &
- (AC_PINCAP_VREF_80 << AC_PINCAP_VREF_SHIFT))
+ if (pinctl &&
+ (node->pin_caps &
+ (AC_PINCAP_VREF_80 << AC_PINCAP_VREF_SHIFT)))
*pinctl |= AC_PINCTL_VREF_80;
if ((location & 0x0f) == AC_JACK_LOC_FRONT)
return "Front Mic";
"{Intel, ICH7},"
"{Intel, ESB2},"
"{Intel, ICH8},"
+ "{Intel, ICH9},"
"{ATI, SB450},"
"{ATI, SB600},"
"{ATI, RS600},"
static int azx_acquire_irq(struct azx *chip, int do_disconnect)
{
- if (request_irq(chip->pci->irq, azx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(chip->pci->irq, azx_interrupt,
+ chip->msi ? 0 : IRQF_SHARED,
"HDA Intel", chip)) {
printk(KERN_ERR "hda-intel: unable to grab IRQ %d, "
"disabling device\n", chip->pci->irq);
{ 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
{ 0x8086, 0x284b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH8 */
+ { 0x8086, 0x293e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH9 */
+ { 0x8086, 0x293f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH9 */
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB450 */
{ 0x1002, 0x4383, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB600 */
{ 0x1002, 0x793b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI }, /* ATI RS600 HDMI */
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_VIA }, /* VIA VT8251/VT8237A */
{ 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_SIS }, /* SIS966 */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ULI }, /* ULI M5461 */
- { 0x10de, 0x026c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA 026c */
- { 0x10de, 0x0371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA 0371 */
- { 0x10de, 0x03f0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA 03f0 */
+ { 0x10de, 0x026c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP51 */
+ { 0x10de, 0x0371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP55 */
+ { 0x10de, 0x03e4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP61 */
+ { 0x10de, 0x03f0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP61 */
+ { 0x10de, 0x044a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP65 */
+ { 0x10de, 0x044b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP65 */
+ { 0x10de, 0x055c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP67 */
+ { 0x10de, 0x055d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_NVIDIA }, /* NVIDIA MCP67 */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
if (names[wid_value])
return names[wid_value];
else
- return "UNKOWN Widget";
+ return "UNKNOWN Widget";
}
static void print_amp_caps(struct snd_info_buffer *buffer,
snd_iprintf(buffer, "\n");
}
+static void print_pcm_rates(struct snd_info_buffer *buffer, unsigned int pcm)
+{
+ static unsigned int rates[] = {
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
+ 96000, 176400, 192000, 384000
+ };
+ int i;
+
+ pcm &= AC_SUPPCM_RATES;
+ snd_iprintf(buffer, " rates [0x%x]:", pcm);
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (pcm & (1 << i))
+ snd_iprintf(buffer, " %d", rates[i]);
+ snd_iprintf(buffer, "\n");
+}
+
+static void print_pcm_bits(struct snd_info_buffer *buffer, unsigned int pcm)
+{
+ static unsigned int bits[] = { 8, 16, 20, 24, 32 };
+ int i;
+
+ pcm = (pcm >> 16) & 0xff;
+ snd_iprintf(buffer, " bits [0x%x]:", pcm);
+ for (i = 0; i < ARRAY_SIZE(bits); i++)
+ if (pcm & (1 << i))
+ snd_iprintf(buffer, " %d", bits[i]);
+ snd_iprintf(buffer, "\n");
+}
+
+static void print_pcm_formats(struct snd_info_buffer *buffer,
+ unsigned int streams)
+{
+ snd_iprintf(buffer, " formats [0x%x]:", streams & 0xf);
+ if (streams & AC_SUPFMT_PCM)
+ snd_iprintf(buffer, " PCM");
+ if (streams & AC_SUPFMT_FLOAT32)
+ snd_iprintf(buffer, " FLOAT");
+ if (streams & AC_SUPFMT_AC3)
+ snd_iprintf(buffer, " AC3");
+ snd_iprintf(buffer, "\n");
+}
+
static void print_pcm_caps(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
{
snd_iprintf(buffer, "N/A\n");
return;
}
- snd_iprintf(buffer, "rates 0x%03x, bits 0x%02x, types 0x%x\n",
- pcm & AC_SUPPCM_RATES, (pcm >> 16) & 0xff, stream & 0xf);
+ print_pcm_rates(buffer, pcm);
+ print_pcm_bits(buffer, pcm);
+ print_pcm_formats(buffer, stream);
}
static const char *get_jack_location(u32 cfg)
snd_iprintf(buffer, "Revision Id: 0x%x\n", codec->revision_id);
if (! codec->afg)
return;
- snd_iprintf(buffer, "Default PCM: ");
+ snd_iprintf(buffer, "Default PCM:\n");
print_pcm_caps(buffer, codec, codec->afg);
snd_iprintf(buffer, "Default Amp-In caps: ");
print_amp_caps(buffer, codec, codec->afg, HDA_INPUT);
if ((wid_type == AC_WID_AUD_OUT || wid_type == AC_WID_AUD_IN) &&
(wid_caps & AC_WCAP_FORMAT_OVRD)) {
- snd_iprintf(buffer, " PCM: ");
+ snd_iprintf(buffer, " PCM:\n");
print_pcm_caps(buffer, codec, nid);
}
{ .modelname = "3stack", .config = AD1986A_3STACK },
{ .pci_subvendor = 0x10de, .pci_subdevice = 0xcb84,
.config = AD1986A_3STACK }, /* ASUS A8N-VM CSM */
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x817f,
+ .config = AD1986A_3STACK }, /* ASUS P5P-L2 */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81b3,
.config = AD1986A_3STACK }, /* ASUS P5RD2-VM / P5GPL-X SE */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81cb,
{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc024,
.config = AD1986A_LAPTOP_EAPD }, /* Samsung R65-T2300 Charis */
{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc026,
- .config = AD1986A_LAPTOP_EAPD }, /* Samsung X10-T2300 Culesa */
+ .config = AD1986A_LAPTOP_EAPD }, /* Samsung X11-T2300 Culesa */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1153,
.config = AD1986A_LAPTOP_EAPD }, /* ASUS M9 */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1213,
.config = AD1986A_LAPTOP_EAPD }, /* ASUS U5F */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1297,
.config = AD1986A_LAPTOP_EAPD }, /* ASUS Z62F */
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x12b3,
+ .config = AD1986A_LAPTOP_EAPD }, /* ASUS V1j */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x30af,
.config = AD1986A_LAPTOP_EAPD }, /* HP Compaq Presario B2800 */
{ .pci_subvendor = 0x17aa, .pci_subdevice = 0x2066,
int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
spec->num_channel_mode,
&spec->multiout.max_channels);
- if (! err && spec->need_dac_fix)
+ if (err >= 0 && spec->need_dac_fix)
spec->multiout.num_dacs = spec->multiout.max_channels / 2;
return err;
}
int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
spec->num_channel_mode,
&spec->multiout.max_channels);
- if (! err && spec->need_dac_fix)
+ if (err >= 0 && spec->need_dac_fix)
spec->multiout.num_dacs = spec->multiout.max_channels / 2;
return err;
}
{ .modelname = "6stack-dig", .config = ALC883_6ST_DIG },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x6668,
.config = ALC883_6ST_DIG }, /* MSI */
+ { .pci_subvendor = 0x1462, .pci_subdevice = 0x7280,
+ .config = ALC883_6ST_DIG }, /* MSI K9A Platinum (MS-7280) */
{ .pci_subvendor = 0x105b, .pci_subdevice = 0x6668,
.config = ALC883_6ST_DIG }, /* Foxconn */
{ .modelname = "6stack-dig-demo", .config = ALC888_DEMO_BOARD },
{ .modelname = "hp-bpc", .config = ALC262_HP_BPC },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x280c,
.config = ALC262_HP_BPC }, /* xw4400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x2801,
+ .config = ALC262_HP_BPC }, /* q965 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3014,
.config = ALC262_HP_BPC }, /* xw6400 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3015,
if((val&SI3054_MEI_READY) != SI3054_MEI_READY) {
snd_printk(KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n", val);
- return -EACCES;
+ /* let's pray that this is no fatal error */
+ /* return -EACCES; */
}
SET_REG(codec, SI3054_GPIO_POLARITY, 0xffff);
ice->dmapath_port = pci_resource_start(pci, 2);
ice->profi_port = pci_resource_start(pci, 3);
- if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_SHARED,
"ICE1712", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ice1712_free(ice);
ice->profi_port = pci_resource_start(pci, 1);
if (request_irq(pci->irq, snd_vt1724_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "ICE1724", ice)) {
+ IRQF_SHARED, "ICE1724", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vt1724_free(ice);
return -EIO;
}
pci_set_master(pci);
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
printk(KERN_ERR "intel8x0: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
/* request irq after initializaing int_sta_mask, etc */
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
return -EBUSY;
}
pci_set_master(pci);
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
printk(KERN_ERR "intel8x0m: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
}
port_inited:
- if (request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
}
err = request_irq(pci->irq, snd_korg1212_interrupt,
- IRQF_DISABLED|IRQF_SHARED,
+ IRQF_SHARED,
"korg1212", korg1212);
if (err) {
* shifted list address is aligned.
* list address = (mem address >> 1) >> 7;
*/
- data_bytes = (data_bytes + 255) & ~255;
+ data_bytes = ALIGN(data_bytes, 256);
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
- if (request_irq(pci->irq, snd_m3_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
/* release irq */
if (mgr->irq >= 0)
- free_irq(mgr->irq, (void *)mgr);
+ free_irq(mgr->irq, mgr);
/* reset board if some firmware was loaded */
if(mgr->dsp_loaded) {
pci_resource_len(pci, i));
}
- if (request_irq(pci->irq, snd_mixart_interrupt, IRQF_DISABLED|IRQF_SHARED, CARD_NAME, (void *)mgr)) {
+ if (request_irq(pci->irq, snd_mixart_interrupt, IRQF_SHARED,
+ CARD_NAME, mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_mixart_free(mgr);
return -EBUSY;
{
mutex_lock(&chip->irq_mutex);
if (chip->irq < 0) {
- if (request_irq(chip->pci->irq, chip->interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(chip->pci->irq, chip->interrupt, IRQF_SHARED,
chip->card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->pci->irq);
mutex_unlock(&chip->irq_mutex);
mgr->pci = pci;
mgr->irq = -1;
- if (request_irq(pci->irq, pcxhr_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, pcxhr_interrupt, IRQF_SHARED,
card_name, mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
pcxhr_free(mgr);
hwport = (struct riptideport *)chip->port;
UNSET_AIE(hwport);
- if (request_irq
- (pci->irq, snd_riptide_interrupt, IRQF_DISABLED | IRQF_SHARED,
- "RIPTIDE", chip)) {
+ if (request_irq(pci->irq, snd_riptide_interrupt, IRQF_SHARED,
+ "RIPTIDE", chip)) {
snd_printk(KERN_ERR "Riptide: unable to grab IRQ %d\n",
pci->irq);
snd_riptide_free(chip);
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_DISABLED | IRQF_SHARED, "RME32", (void *) rme32)) {
+ if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_SHARED,
+ "RME32", rme32)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme96_interrupt, IRQF_DISABLED|IRQF_SHARED, "RME96", (void *)rme96)) {
+ if (request_irq(pci->irq, snd_rme96_interrupt, IRQF_SHARED,
+ "RME96", rme96)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
/* Align to bus-space 64K boundary */
- cb_bus = (hdsp->capture_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
- pb_bus = (hdsp->playback_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
+ cb_bus = ALIGN(hdsp->capture_dma_buf.addr, 0x10000ul);
+ pb_bus = ALIGN(hdsp->playback_dma_buf.addr, 0x10000ul);
/* Tell the card where it is */
return -EBUSY;
}
- if (request_irq(pci->irq, snd_hdsp_interrupt, IRQF_DISABLED|IRQF_SHARED, "hdsp", (void *)hdsp)) {
+ if (request_irq(pci->irq, snd_hdsp_interrupt, IRQF_SHARED,
+ "hdsp", hdsp)) {
snd_printk(KERN_ERR "Hammerfall-DSP: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
}
hdsp->irq = pci->irq;
- hdsp->precise_ptr = 1;
+ hdsp->precise_ptr = 0;
hdsp->use_midi_tasklet = 1;
if ((err = snd_hdsp_initialize_memory(hdsp)) < 0)
hdspm->port + io_extent - 1);
if (request_irq(pci->irq, snd_hdspm_interrupt,
- IRQF_DISABLED | IRQF_SHARED, "hdspm",
- (void *) hdspm)) {
+ IRQF_SHARED, "hdspm", hdspm)) {
snd_printk(KERN_ERR "HDSPM: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
}
/* Align to bus-space 64K boundary */
- cb_bus = (rme9652->capture_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
- pb_bus = (rme9652->playback_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
+ cb_bus = ALIGN(rme9652->capture_dma_buf.addr, 0x10000ul);
+ pb_bus = ALIGN(rme9652->playback_dma_buf.addr, 0x10000ul);
/* Tell the card where it is */
return -EBUSY;
}
- if (request_irq(pci->irq, snd_rme9652_interrupt, IRQF_DISABLED|IRQF_SHARED, "rme9652", (void *)rme9652)) {
+ if (request_irq(pci->irq, snd_rme9652_interrupt, IRQF_SHARED,
+ "rme9652", rme9652)) {
snd_printk(KERN_ERR "unable to request IRQ %d\n", pci->irq);
return -EBUSY;
}
pci_write_config_dword(sonic->pci, 0x40, sonic->dmaa_port);
pci_write_config_dword(sonic->pci, 0x48, sonic->dmac_port);
if (sonic->irq >= 0)
- free_irq(sonic->irq, (void *)sonic);
+ free_irq(sonic->irq, sonic);
release_and_free_resource(sonic->res_dmaa);
release_and_free_resource(sonic->res_dmac);
pci_release_regions(sonic->pci);
sonic->midi_port = pci_resource_start(pci, 3);
sonic->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_sonicvibes_interrupt, IRQF_DISABLED|IRQF_SHARED, "S3 SonicVibes", (void *)sonic)) {
+ if (request_irq(pci->irq, snd_sonicvibes_interrupt, IRQF_SHARED,
+ "S3 SonicVibes", sonic)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_sonicvibes_free(sonic);
return -EBUSY;
snd_printk(KERN_ERR "trident: unable to allocate TLB buffer\n");
return -ENOMEM;
}
- trident->tlb.entries = (unsigned int*)(((unsigned long)trident->tlb.buffer.area + SNDRV_TRIDENT_MAX_PAGES * 4 - 1) & ~(SNDRV_TRIDENT_MAX_PAGES * 4 - 1));
- trident->tlb.entries_dmaaddr = (trident->tlb.buffer.addr + SNDRV_TRIDENT_MAX_PAGES * 4 - 1) & ~(SNDRV_TRIDENT_MAX_PAGES * 4 - 1);
+ trident->tlb.entries = (unsigned int*)ALIGN((unsigned long)trident->tlb.buffer.area, SNDRV_TRIDENT_MAX_PAGES * 4);
+ trident->tlb.entries_dmaaddr = ALIGN(trident->tlb.buffer.addr, SNDRV_TRIDENT_MAX_PAGES * 4);
/* allocate shadow TLB page table (virtual addresses) */
trident->tlb.shadow_entries = vmalloc(SNDRV_TRIDENT_MAX_PAGES*sizeof(unsigned long));
if (trident->tlb.shadow_entries == NULL) {
}
trident->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_trident_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_trident_interrupt, IRQF_SHARED,
"Trident Audio", trident)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_trident_free(trident);
if (request_irq(pci->irq,
chip_type == TYPE_VIA8233 ?
snd_via8233_interrupt : snd_via686_interrupt,
- IRQF_DISABLED|IRQF_SHARED,
+ IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
static int __devinit check_dxs_list(struct pci_dev *pci, int revision)
{
- static struct dxs_whitelist whitelist[] = {
+ static struct dxs_whitelist whitelist[] __devinitdata = {
{ .subvendor = 0x1005, .subdevice = 0x4710, .action = VIA_DXS_ENABLE }, /* Avance Logic Mobo */
{ .subvendor = 0x1019, .subdevice = 0x0996, .action = VIA_DXS_48K },
{ .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */
{ .subvendor = 0x4005, .subdevice = 0x4710, .action = VIA_DXS_SRC }, /* MSI K7T266 Pro2 (MS-6380 V2.0) BIOS 3.7 */
{ } /* terminator */
};
- struct dxs_whitelist *w;
+ const struct dxs_whitelist *w;
unsigned short subsystem_vendor;
unsigned short subsystem_device;
return err;
}
chip->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
for (i = 0; i < 2; i++)
vx->port[i] = pci_resource_start(pci, i + 1);
- if (request_irq(pci->irq, snd_vx_irq_handler, IRQF_DISABLED|IRQF_SHARED,
- CARD_NAME, (void *) chip)) {
+ if (request_irq(pci->irq, snd_vx_irq_handler, IRQF_SHARED,
+ CARD_NAME, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vx222_free(chip);
return -EBUSY;
static long joystick_port[SNDRV_CARDS];
#endif
static int rear_switch[SNDRV_CARDS];
-static int rear_swap[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = 1 };
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the Yamaha DS-1 PCI soundcard.");
#endif
module_param_array(rear_switch, bool, NULL, 0444);
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
-module_param_array(rear_swap, bool, NULL, 0444);
-MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
static struct pci_device_id snd_ymfpci_ids[] = {
{ 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */
snd_card_free(card);
return err;
}
- if ((err = snd_ymfpci_mixer(chip, rear_switch[dev], rear_swap[dev])) < 0) {
+ if ((err = snd_ymfpci_mixer(chip, rear_switch[dev])) < 0) {
snd_card_free(card);
return err;
}
ypcm = runtime->private_data;
ypcm->output_front = 1;
ypcm->output_rear = chip->mode_dup4ch ? 1 : 0;
- ypcm->swap_rear = chip->rear_swap;
+ ypcm->swap_rear = 0;
spin_lock_irq(&chip->reg_lock);
if (ypcm->output_rear) {
ymfpci_open_extension(chip);
ypcm = runtime->private_data;
ypcm->output_front = 0;
ypcm->output_rear = 1;
+ ypcm->swap_rear = 1;
spin_lock_irq(&chip->reg_lock);
snd_ymfpci_writew(chip, YDSXGR_SPDIFOUTCTRL,
snd_ymfpci_readw(chip, YDSXGR_SPDIFOUTCTRL) | 2);
ypcm = runtime->private_data;
ypcm->output_front = 0;
ypcm->output_rear = 1;
+ ypcm->swap_rear = 0;
spin_lock_irq(&chip->reg_lock);
ymfpci_open_extension(chip);
chip->rear_opened++;
chip->ac97 = NULL;
}
-int __devinit snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch, int rear_swap)
+int __devinit snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch)
{
struct snd_ac97_template ac97;
struct snd_kcontrol *kctl;
.read = snd_ymfpci_codec_read,
};
- chip->rear_swap = rear_swap;
if ((err = snd_ac97_bus(chip->card, 0, &ops, chip, &chip->ac97_bus)) < 0)
return err;
chip->ac97_bus->private_free = snd_ymfpci_mixer_free_ac97_bus;
chip->bank_size_effect = snd_ymfpci_readl(chip, YDSXGR_EFFCTRLSIZE) << 2;
chip->work_size = YDSXG_DEFAULT_WORK_SIZE;
- size = ((playback_ctrl_size + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_playback * 2 * YDSXG_PLAYBACK_VOICES + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_capture * 2 * YDSXG_CAPTURE_VOICES + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_effect * 2 * YDSXG_EFFECT_VOICES + 0x00ff) & ~0x00ff) +
+ size = ALIGN(playback_ctrl_size, 0x100) +
+ ALIGN(chip->bank_size_playback * 2 * YDSXG_PLAYBACK_VOICES, 0x100) +
+ ALIGN(chip->bank_size_capture * 2 * YDSXG_CAPTURE_VOICES, 0x100) +
+ ALIGN(chip->bank_size_effect * 2 * YDSXG_EFFECT_VOICES, 0x100) +
chip->work_size;
/* work_ptr must be aligned to 256 bytes, but it's already
covered with the kernel page allocation mechanism */
chip->bank_base_playback_addr = ptr_addr;
chip->ctrl_playback = (u32 *)ptr;
chip->ctrl_playback[0] = cpu_to_le32(YDSXG_PLAYBACK_VOICES);
- ptr += (playback_ctrl_size + 0x00ff) & ~0x00ff;
- ptr_addr += (playback_ctrl_size + 0x00ff) & ~0x00ff;
+ ptr += ALIGN(playback_ctrl_size, 0x100);
+ ptr_addr += ALIGN(playback_ctrl_size, 0x100);
for (voice = 0; voice < YDSXG_PLAYBACK_VOICES; voice++) {
chip->voices[voice].number = voice;
chip->voices[voice].bank = (struct snd_ymfpci_playback_bank *)ptr;
ptr_addr += chip->bank_size_playback;
}
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->bank_base_capture = ptr;
chip->bank_base_capture_addr = ptr_addr;
for (voice = 0; voice < YDSXG_CAPTURE_VOICES; voice++)
ptr += chip->bank_size_capture;
ptr_addr += chip->bank_size_capture;
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->bank_base_effect = ptr;
chip->bank_base_effect_addr = ptr_addr;
for (voice = 0; voice < YDSXG_EFFECT_VOICES; voice++)
ptr += chip->bank_size_effect;
ptr_addr += chip->bank_size_effect;
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->work_base = ptr;
chip->work_base_addr = ptr_addr;
snd_dma_free_pages(&chip->work_ptr);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
release_and_free_resource(chip->res_reg_area);
pci_write_config_word(chip->pci, 0x40, chip->old_legacy_ctrl);
chip->pci = pci;
chip->irq = -1;
chip->device_id = pci->device;
- pci_read_config_byte(pci, PCI_REVISION_ID, (u8 *)&chip->rev);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->rev);
chip->reg_area_phys = pci_resource_start(pci, 0);
chip->reg_area_virt = ioremap_nocache(chip->reg_area_phys, 0x8000);
pci_set_master(pci);
snd_ymfpci_free(chip);
return -EBUSY;
}
- if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_DISABLED|IRQF_SHARED, "YMFPCI", (void *) chip)) {
+ if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_SHARED,
+ "YMFPCI", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ymfpci_free(chip);
return -EBUSY;
return -EIO;
}
- chip->rear_swap = 1;
if ((err = snd_ymfpci_ac3_init(chip)) < 0) {
snd_ymfpci_free(chip);
return err;
.channels_min = 1,
.channels_max = 2,
.buffer_bytes_max = (32*1024),
- .period_bytes_min = 4096,
+ .period_bytes_min = 64,
.period_bytes_max = (32*1024),
.periods_min = 1,
.periods_max = 1024,
.channels_min = 1,
.channels_max = 2,
.buffer_bytes_max = (32*1024),
- .period_bytes_min = 4096,
+ .period_bytes_min = 64,
.period_bytes_max = (32*1024),
.periods_min = 1,
.periods_max = 1024,
snd_cs4231_outm(chip, CS4231_IRQ_STATUS, ~CS4231_ALL_IRQS | ~status, 0);
spin_unlock_irqrestore(&chip->lock, flags);
- return 0;
+ return IRQ_HANDLED;
}
/*
if (!(csr & test))
goto out;
err = -EBUSY;
- csr = sbus_readl(base->regs + APCCSR);
test = APC_XINT_CNVA;
if ( base->dir == APC_PLAY )
test = APC_XINT_PNVA;
spin_lock_irqsave(&base->lock, flags);
if (!on) {
- if (base->dir == APC_PLAY) {
- sbus_writel(0, base->regs + base->dir + APCNVA);
- sbus_writel(1, base->regs + base->dir + APCC);
- }
- else
- {
- sbus_writel(0, base->regs + base->dir + APCNC);
- sbus_writel(0, base->regs + base->dir + APCVA);
- }
+ sbus_writel(0, base->regs + base->dir + APCNC);
+ sbus_writel(0, base->regs + base->dir + APCNVA);
+ sbus_writel(0, base->regs + base->dir + APCC);
+ sbus_writel(0, base->regs + base->dir + APCVA);
+
+ /* ACK any APC interrupts. */
+ csr = sbus_readl(base->regs + APCCSR);
+ sbus_writel(csr, base->regs + APCCSR);
}
- udelay(600);
+ udelay(1000);
csr = sbus_readl(base->regs + APCCSR);
shift = 0;
if ( base->dir == APC_PLAY )
fp->nr_rates = nr_rates;
fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
- unsigned int rate = fp->rate_table[r] = combine_triple(&fmt[idx]);
+ unsigned int rate = combine_triple(&fmt[idx]);
+ /* C-Media CM6501 mislabels its 96 kHz altsetting */
+ if (rate == 48000 && nr_rates == 1 &&
+ chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+ fp->altsetting == 5 && fp->maxpacksize == 392)
+ rate = 96000;
+ fp->rate_table[r] = rate;
if (rate < fp->rate_min)
fp->rate_min = rate;
else if (rate > fp->rate_max)
static int snd_usb_audio_free(struct snd_usb_audio *chip)
{
+ usb_chip[chip->index] = NULL;
kfree(chip);
return 0;
}
list_for_each(p, &chip->mixer_list) {
snd_usb_mixer_disconnect(p);
}
- usb_chip[chip->index] = NULL;
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
printk(KERN_WARNING "invalid nrpacks value.\n");
return -EINVAL;
}
- usb_register(&usb_audio_driver);
- return 0;
+ return usb_register(&usb_audio_driver);
}
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
if (! namelist[i]) {
snd_printk(KERN_ERR "cannot malloc\n");
- while (--i > 0)
+ while (i--)
kfree(namelist[i]);
kfree(namelist);
kfree(cval);
usX2Y_error_urb_status(usX2Y, subs, urb);
return;
}
- if (likely(urb->start_frame == usX2Y->wait_iso_frame))
+ if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF)))
subs->completed_urb = urb;
else {
usX2Y_error_sequence(usX2Y, subs, urb);
usX2Y_error_urb_status(usX2Y, subs, urb);
return;
}
- if (likely(urb->start_frame == usX2Y->wait_iso_frame))
+ if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF)))
subs->completed_urb = urb;
else {
usX2Y_error_sequence(usX2Y, subs, urb);
projects / deliverable / linux.git / commitdiff
