ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level

The configuration of the USB OTG is a platform configuration decision,
not a microsom decision.  Move this configuration out to the platform
level files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 5373a5f2782bedb40786a4701833b162821a1553..c8e51dd41b8f2e9f729e852ee68140ae896b3ad6 100644 (file)
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -143,6 +143,14 @@
                        fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
                };
 
+               pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+                       /*
+                        * Similar to pinctrl_usbotg_2, but we want it
+                        * pulled down for a fixed host connection.
+                        */
+                       fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+               };
+
                pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
                        fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
                };
@@ -178,6 +186,8 @@
 };
 
 &usbotg {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
        vbus-supply = <&reg_usbotg_vbus>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 9202c8d18a303a509dc1485c5ff1ef35c32374e4..e8e781656b3f5ec422800d731768eefb70a88ed7 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -134,6 +134,14 @@
                        fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
                };
 
+               pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+                       /*
+                        * The Cubox-i pulls this low, but as it's pointless
+                        * leaving it as a pull-up, even if it is just 10uA.
+                        */
+                       fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+               };
+
                pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
                        fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
                };
@@ -170,6 +178,8 @@
 };
 
 &usbotg {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
        vbus-supply = <&reg_usbotg_vbus>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index d729d0b15f251bbf6e6a50fad6ec858856ba2b64..79eac6849d4c9d8964882d1e64435d868c2c7c01 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -10,14 +10,6 @@
                                MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
                        >;
                };
-
-               pinctrl_microsom_usbotg: microsom-usbotg {
-                       /*
-                        * Similar to pinctrl_usbotg_2, but we want it
-                        * pulled down for a fixed host connection.
-                        */
-                       fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-               };
        };
 };
 
@@ -26,8 +18,3 @@
        pinctrl-0 = <&pinctrl_microsom_uart1>;
        status = "okay";
 };
-
-&usbotg {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_microsom_usbotg>;
-};