ARM: ux500: Rename references to the ccu9540 dev board accordingly

When enabling ST-Ericsson's ccu9540 development board the board's
full name has not been used. This patch adapts all references of
the board's short name to how it should be referenced.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
new file mode 100644 (file)
index 0000000..26dfe83
--- /dev/null
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+       model = "ST-Ericsson CCU9540 platform with Device Tree";
+       compatible = "st-ericsson,ccu9540";
+
+       memory {
+               reg = <0x00000000 0x20000000>;
+       };
+
+       soc-u9500 {
+               uart@80120000 {
+                       status = "okay";
+               };
+
+               uart@80121000 {
+                       status = "okay";
+               };
+
+               uart@80007000 {
+                       status = "okay";
+               };
+
+               // External Micro SD slot
+               sdi0_per1@80126000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <100000000>;
+                       bus-width = <4>;
+                       mmc-cap-sd-highspeed;
+                       mmc-cap-mmc-highspeed;
+                       vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+                       cd-gpios  = <&gpio7 6 0x4>; // 230
+                       cd-inverted;
+
+                       status = "okay";
+               };
+
+
+               // WLAN SDIO channel
+               sdi1_per2@80118000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <50000000>;
+                       bus-width = <4>;
+
+                       status = "okay";
+               };
+
+               // On-board eMMC
+               sdi4_per2@80114000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <100000000>;
+                       bus-width = <8>;
+                       mmc-cap-mmc-highspeed;
+                       vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+                       status = "okay";
+               };
+       };
+};

diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
deleted file mode 100644 (file)
index 95892ec..0000000
--- a/arch/arm/boot/dts/u9540.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "dbx5x0.dtsi"
-
-/ {
-       model = "ST-Ericsson U9540 platform with Device Tree";
-       compatible = "st-ericsson,u9540";
-
-       memory {
-               reg = <0x00000000 0x20000000>;
-       };
-
-       soc-u9500 {
-               uart@80120000 {
-                       status = "okay";
-               };
-
-               uart@80121000 {
-                       status = "okay";
-               };
-
-               uart@80007000 {
-                       status = "okay";
-               };
-
-               // External Micro SD slot
-               sdi0_per1@80126000 {
-                       arm,primecell-periphid = <0x10480180>;
-                       max-frequency = <100000000>;
-                       bus-width = <4>;
-                       mmc-cap-sd-highspeed;
-                       mmc-cap-mmc-highspeed;
-                       vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-                       cd-gpios  = <&gpio7 6 0x4>; // 230
-                       cd-inverted;
-
-                       status = "okay";
-               };
-
-
-               // WLAN SDIO channel
-               sdi1_per2@80118000 {
-                       arm,primecell-periphid = <0x10480180>;
-                       max-frequency = <50000000>;
-                       bus-width = <4>;
-
-                       status = "okay";
-               };
-
-               // On-board eMMC
-               sdi4_per2@80114000 {
-                       arm,primecell-periphid = <0x10480180>;
-                       max-frequency = <100000000>;
-                       bus-width = <8>;
-                       mmc-cap-mmc-highspeed;
-                       vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-                       status = "okay";
-               };
-       };
-};

diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 0b15591a087d45ac2bafb283324bcd26f3d97bab..6e9a06d693a61fdc1ba0893017f6052728585dd8 100644 (file)
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -320,8 +320,8 @@ static void __init u8500_init_machine(void)
                snowball_pinmaps_init();
        else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
                hrefv60_pinmaps_init();
-       else if (of_machine_is_compatible("st-ericsson,u9540")) {}
-               /* TODO: Add u9540 pinmaps. */
+       else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
+               /* TODO: Add pinmaps for ccu9540 board. */
 
        /* TODO: Export SoC, USB, cpu-freq and DMA40 */
        parent = u8500_of_init_devices();
@@ -334,7 +334,7 @@ static const char * u8500_dt_board_compat[] = {
        "calaosystems,snowball-a9500",
        "st-ericsson,hrefv60+",
        "st-ericsson,mop500",
-       "st-ericsson,u9540",
+       "st-ericsson,ccu9540",
        NULL,
 };