ARM: dts: Add omap3-beagle.dts
authorJon Hunter <jon-hunter@ti.com>
Tue, 11 Sep 2012 16:01:59 +0000 (11:01 -0500)
committerBenoit Cousson <b-cousson@ti.com>
Mon, 29 Oct 2012 15:56:24 +0000 (16:56 +0100)
Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This
version of the Beagle board has 256MB of DDR and features the same TWL4030
power management IC (PMIC) as the Beagle board XM.

Given that the Beagle and Beagle-XM boards use the same PMIC, move the
definition of the VSIM regulator into the TWL4030.dtsi file so that we do not
need to duplicate in the Beagle board dts file.

This has been boot tested on an OMAP3530 Beagle board and verifing that the
SD/MMC interface is working with a SD card.

V2 changes
- Rebased upon of devel-dt
- Corrected copyright date in omap3-beagle.dts file
- Added LED support after verifing that Beagle and Beagle XM have the same LED
  configuration

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/omap3-beagle-xm.dts
arch/arm/boot/dts/omap3-beagle.dts [new file with mode: 0644]
arch/arm/boot/dts/twl4030.dtsi

index f37cf9fa5fa073318b3c6faad5d0a1480bd99826..e69c921d44a237475720758d68f21aa7e188d2af 100644 (file)
@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
        imx28-m28evk.dtb \
        imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+       omap3-beagle.dtb \
        omap3-beagle-xm.dtb \
        omap3-evm.dtb \
        omap3-tobi.dtb \
index c38cf76df81f2eaf3a3dfd9e1a8d3910f84f2067..3705a81c1fc25eac3b03d4b90be08f6fef7387f9 100644 (file)
                interrupts = <7>; /* SYS_NIRQ cascaded to intc */
                interrupt-parent = <&intc>;
 
-               vsim: regulator-vsim {
-                       compatible = "ti,twl4030-vsim";
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <3000000>;
-               };
-
                twl_audio: audio {
                        compatible = "ti,twl4030-audio";
                        codec {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644 (file)
index 0000000..f624dc8
--- /dev/null
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+       model = "TI OMAP3 BeagleBoard";
+       compatible = "ti,omap3-beagle", "ti,omap3";
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x10000000>; /* 256 MB */
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pmu_stat {
+                       label = "beagleboard::pmu_stat";
+                       gpios = <&twl_gpio 19 0>; /* LEDB */
+               };
+
+               heartbeat {
+                       label = "beagleboard::usr0";
+                       gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+                       linux,default-trigger = "heartbeat";
+               };
+
+               mmc {
+                       label = "beagleboard::usr1";
+                       gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+                       linux,default-trigger = "mmc0";
+               };
+       };
+
+};
+
+&i2c1 {
+       clock-frequency = <2600000>;
+
+       twl: twl@48 {
+               reg = <0x48>;
+               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+               interrupt-parent = <&intc>;
+       };
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+       vmmc-supply = <&vmmc1>;
+       vmmc_aux-supply = <&vsim>;
+       bus-width = <8>;
+};
+
+&mmc2 {
+       status = "disabled";
+};
+
+&mmc3 {
+       status = "disabled";
+};
index ff000172c93c42306c42fb15446b378a24596ed4..c5337d4d073cec58b740d2d989be3594e9f45d4b 100644 (file)
                regulator-max-microvolt = <3150000>;
        };
 
+       vsim: regulator-vsim {
+               compatible = "ti,twl4030-vsim";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3000000>;
+       };
+
        twl_gpio: gpio {
                compatible = "ti,twl4030-gpio";
                gpio-controller;
This page took 0.02696 seconds and 5 git commands to generate.