endif
@touch $@
-archprepare: maketools include/asm-arm/.arch
+archprepare: maketools
.PHONY: maketools FORCE
-maketools: include/linux/version.h FORCE
+maketools: include/linux/version.h include/asm-arm/.arch FORCE
$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
# Convert bzImage to zImage
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:53:40 2005
+# Linux kernel version: 2.6.14-rc1-git5
+# Tue Sep 20 17:26:28 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
#
# IXP4xx Platforms
#
-# CONFIG_ARCH_AVILA is not set
+CONFIG_ARCH_AVILA=y
CONFIG_ARCH_ADI_COYOTE=y
CONFIG_ARCH_IXDP425=y
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
+CONFIG_MACH_IXDPG425=y
+CONFIG_MACH_IXDP465=y
CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_ARCH_IXDP4XX=y
-# CONFIG_MACH_GTWX5715 is not set
+CONFIG_CPU_IXP46X=y
+CONFIG_MACH_GTWX5715=y
#
# IXP4xx Options
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
# Kernel Features
#
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_PM=y
CONFIG_APM=y
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+CONFIG_IP_NF_MATCH_MAC=m
+# CONFIG_IP_NF_MATCH_PKTTYPE is not set
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+# CONFIG_IP_NF_MATCH_HELPER is not set
+CONFIG_IP_NF_MATCH_STATE=m
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+CONFIG_IP_NF_TARGET_MARK=m
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+# CONFIG_NET_DIVERT is not set
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
+# Network device support
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-# CONFIG_IP_NF_MATCH_HELPER is not set
-CONFIG_IP_NF_MATCH_STATE=m
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_PHYSDEV is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-CONFIG_IP_NF_TARGET_MARK=m
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_HERMES=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=y
# CONFIG_ATMEL is not set
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP4XX=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
+# Misc devices
#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
#
-# Misc devices
+# Multimedia Capabilities Port drivers
#
#
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
} else if (type & IRQT_LOW) {
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
- }
+ } else
+ return -EINVAL;
ixp4xx_config_irq(irq, irq_type);
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+
+ return 0;
}
static void ixp4xx_irq_mask(unsigned int irq)
#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/efi.h>
-#include <linux/irq.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/config.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/config.h>
-#include <linux/irq.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/config.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/processor.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/smp.h>
-#include <linux/irq.h>
#include <linux/reboot.h>
#include <linux/kexec.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/timer.h>
#include <asm/pgtable.h>
#include <asm/delay.h>
#include <asm/arch_hooks.h>
#include <asm/i8259.h>
-#include <linux/irq.h>
-
#include <io_ports.h>
/*
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/config.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
-#include <asm/irq.h>
#include <asm/desc.h>
#ifdef CONFIG_MATH_EMULATION
#include <asm/math_emu.h>
#endif
-#include <linux/irq.h>
#include <linux/err.h>
#include <asm/tlbflush.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/smp_lock.h>
-#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/device.h>
-#include <linux/irq.h>
#include <linux/sysdev.h>
#include <linux/timex.h>
#include <asm/delay.h>
#include <asm/arch_hooks.h>
#include <asm/kdebug.h>
-#include <linux/irq.h>
#include <linux/module.h>
#include "mach_traps.h"
#include <linux/config.h>
#include <linux/smp.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/arch_hooks.h>
#include <linux/smp.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/fixmap.h>
#include <linux/config.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/arch_hooks.h>
#include <asm/voyager.h>
#include <asm/vic.h>
#include <linux/pm.h>
-#include <linux/irq.h>
#include <asm/tlbflush.h>
#include <asm/arch_hooks.h>
#include <asm/i8253.h>
#include <asm/tlbflush.h>
#include <asm/arch_hooks.h>
-#include <linux/irq.h>
-
/* TLB state -- visible externally, indexed physically */
DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
#include <asm/mtrr.h>
#include <asm/msr.h>
-#include <linux/irq.h>
-
#define THREAD_NAME "kvoyagerd"
/* external variables */
#include <linux/init.h>
#include <linux/smp.h>
-#include <linux/irq.h>
+#include <linux/errno.h>
#include <linux/oprofile.h>
#include <linux/rcupdate.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <asm/hw_irq.h>
#include <asm/numa.h>
#include "pci.h"
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/dmi.h>
#include <asm/io.h>
#include <asm/smp.h>
*/
#include <linux/config.h>
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/poll.h>
-#include <linux/delay.h>
-#include <linux/sysrq.h>
-#include <linux/proc_fs.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/device.h>
#include <linux/suspend.h>
-#include <linux/acpi.h>
-
-#include <asm/uaccess.h>
-#include <asm/acpi.h>
-#include <asm/tlbflush.h>
-#include <asm/processor.h>
static struct saved_context saved_context;
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)
-CHECKFLAGS := $(CHECK) -D__m32r__
+CHECKFLAGS += -D__m32r__ -D__BIG_ENDIAN__=1
head-y := arch/m32r/kernel/head.o arch/m32r/kernel/init_task.o
#include <asm/uaccess.h>
unsigned long
-__generic_copy_to_user(void *to, const void *from, unsigned long n)
+__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
{
prefetch(from);
if (access_ok(VERIFY_WRITE, to, n))
}
unsigned long
-__generic_copy_from_user(void *to, const void *from, unsigned long n)
+__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
{
prefetchw(to);
if (access_ok(VERIFY_READ, from, n))
#endif /* CONFIG_ISA_DUAL_ISSUE */
long
-__strncpy_from_user(char *dst, const char *src, long count)
+__strncpy_from_user(char *dst, const char __user *src, long count)
{
long res;
__do_strncpy_from_user(dst, src, count, res);
}
long
-strncpy_from_user(char *dst, const char *src, long count)
+strncpy_from_user(char *dst, const char __user *src, long count)
{
long res = -EFAULT;
if (access_ok(VERIFY_READ, src, 1))
#endif /* not CONFIG_ISA_DUAL_ISSUE */
unsigned long
-clear_user(void *to, unsigned long n)
+clear_user(void __user *to, unsigned long n)
{
if (access_ok(VERIFY_WRITE, to, n))
__do_clear_user(to, n);
}
unsigned long
-__clear_user(void *to, unsigned long n)
+__clear_user(void __user *to, unsigned long n)
{
__do_clear_user(to, n);
return n;
#ifdef CONFIG_ISA_DUAL_ISSUE
-long strnlen_user(const char *s, long n)
+long strnlen_user(const char __user *s, long n)
{
unsigned long mask = -__addr_ok(s);
unsigned long res;
#else /* not CONFIG_ISA_DUAL_ISSUE */
-long strnlen_user(const char *s, long n)
+long strnlen_user(const char __user *s, long n)
{
unsigned long mask = -__addr_ok(s);
unsigned long res;
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
- PCMCIA_DEVICE_PROD_ID12(" ", "NinjaATA-", 0x3b6e20c8, 0xebe0bd79),
+ PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
#include <asm/system.h>
#include <asm/io.h>
+#include <asm/irq.h>
#if ALLOW_DMA
#include <asm/dma.h>
#endif
config TCIC
tristate "Databook TCIC host bridge support"
- depends on PCMCIA
+ depends on PCMCIA && ISA
select PCCARD_NONSTATIC
help
Say Y here to include support for the Databook TCIC family of PCMCIA
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
cardbus_assign_irqs(bus, s->pci_irq);
+
+ /* socket specific tune function */
+ if (s->tune_bridge)
+ s->tune_bridge(s, bus);
+
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
#define TI122X_SCR_SER_STEP 0xc0000000
#define TI122X_SCR_INTRTIE 0x20000000
+#define TIXX21_SCR_TIEALL 0x10000000
#define TI122X_SCR_CBRSVD 0x00400000
#define TI122X_SCR_MRBURSTDN 0x00008000
#define TI122X_SCR_MRBURSTUP 0x00004000
/* EnE test register */
#define ENE_TEST_C9 0xc9 /* 8bit */
#define ENE_TEST_C9_TLTENABLE 0x02
+#define ENE_TEST_C9_PFENABLE_F0 0x04
+#define ENE_TEST_C9_PFENABLE_F1 0x08
+#define ENE_TEST_C9_PFENABLE (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
+#define ENE_TEST_C9_WPDISALBLE_F0 0x40
+#define ENE_TEST_C9_WPDISALBLE_F1 0x80
+#define ENE_TEST_C9_WPDISALBLE (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
/*
* Texas Instruments CardBus controller overrides.
int devfn;
unsigned int state;
int ret = 1;
+ u32 sysctl;
/* catch the two-slot controllers */
switch (socket->dev->device) {
*/
break;
+ case PCI_DEVICE_ID_TI_X515:
+ case PCI_DEVICE_ID_TI_X420:
+ case PCI_DEVICE_ID_TI_X620:
+ case PCI_DEVICE_ID_TI_XX21_XX11:
+ case PCI_DEVICE_ID_TI_7410:
+ case PCI_DEVICE_ID_TI_7610:
+ /*
+ * those are either single or dual slot CB with additional functions
+ * like 1394, smartcard reader, etc. check the TIEALL flag for them
+ * the TIEALL flag binds the IRQ of all functions toghether.
+ * we catch the single slot variants later.
+ */
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ if (sysctl & TIXX21_SCR_TIEALL)
+ return 0;
+
+ break;
+
/* single-slot controllers have the 2nd slot empty always :) */
default:
return 1;
if (!func)
return 1;
+ /*
+ * check that the device id of both slots match. this is needed for the
+ * XX21 and the XX11 controller that share the same device id for single
+ * and dual slot controllers. return '2nd slot empty'. we already checked
+ * if the interrupt is tied to another function.
+ */
+ if (socket->dev->device != func->device)
+ goto out;
+
slot2 = pci_get_drvdata(func);
if (!slot2)
goto out;
if (val_orig != val)
config_writel(socket, TI113X_SYSTEM_CONTROL, val);
- /*
- * for EnE bridges only: clear testbit TLTEnable. this makes the
- * RME Hammerfall DSP sound card working.
- */
- if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
- u8 test_c9 = config_readb(socket, ENE_TEST_C9);
- test_c9 &= ~ENE_TEST_C9_TLTENABLE;
- config_writeb(socket, ENE_TEST_C9, test_c9);
- }
-
/*
* Yenta expects controllers to use CSCINT to route
* CSC interrupts to PCI rather than INTVAL.
return ti12xx_override(socket);
}
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+/**
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ * current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) { \
+ .vendor = _vend, \
+ .device = _dev, \
+ .subvendor = _subvend, \
+ .subdevice = _subdev, \
+ .driver_data = ((mask) << 8 | (bits)), \
+ }
+static struct pci_device_id ene_tune_tbl[] = {
+ /* Echo Audio products based on motorola DSP56301 and DSP56361 */
+ DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+ ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+ DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+ ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+ {}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+ struct pci_dev *dev;
+ struct pci_device_id *id = NULL;
+ u8 test_c9, old_c9, mask, bits;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+ if (id)
+ break;
+ }
+
+ test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+ if (id) {
+ mask = (id->driver_data >> 8) & 0xFF;
+ bits = id->driver_data & 0xFF;
+
+ test_c9 = (test_c9 & ~mask) | bits;
+ }
+ else
+ /* default to clear TLTEnable bit, old behaviour */
+ test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+ printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+ config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+
+static int ene_override(struct yenta_socket *socket)
+{
+ /* install tune_bridge() function */
+ socket->socket.tune_bridge = ene_tune_bridge;
+
+ return ti1250_override(socket);
+}
+
#endif /* _LINUX_TI113X_H */
static int yenta_sock_init(struct pcmcia_socket *sock)
{
struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
- u16 bridge;
-
- bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
- if (!socket->cb_irq)
- bridge |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge);
exca_writeb(socket, I365_GBLCTL, 0x00);
exca_writeb(socket, I365_GENCTL, 0x00);
CARDBUS_TYPE_TOPIC95,
CARDBUS_TYPE_TOPIC97,
CARDBUS_TYPE_O2MICRO,
+ CARDBUS_TYPE_ENE,
};
/*
.override = o2micro_override,
.restore_state = o2micro_restore_state,
},
+ [CARDBUS_TYPE_ENE] = {
+ .override = ene_override,
+ .save_state = ti_save_state,
+ .restore_state = ti_restore_state,
+ .sock_init = ti_init,
+ },
};
{
int i;
unsigned long val;
- u16 bridge_ctrl;
u32 mask;
- /* Set up ISA irq routing to probe the ISA irqs.. */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
- bridge_ctrl |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
- }
-
/*
* Probe for usable interrupts using the force
* register to generate bogus card status events.
mask = probe_irq_mask(val) & 0xffff;
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
return mask;
}
/* probes the PCI interrupt, use only on override functions */
static int yenta_probe_cb_irq(struct yenta_socket *socket)
{
- u16 bridge_ctrl;
-
if (!socket->cb_irq)
return -1;
socket->probe_status = 0;
- /* disable ISA interrupts */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
-
+
msleep(100);
/* disable interrupts */
{
u16 bridge;
struct pci_dev *dev = socket->dev;
+ struct pci_bus_region region;
- pci_set_power_state(socket->dev, 0);
+ pcibios_resource_to_bus(socket->dev, ®ion, &dev->resource[0]);
config_writel(socket, CB_LEGACY_MODE_BASE, 0);
- config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
+ config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
config_writew(socket, PCI_COMMAND,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
* - PCI interrupts enabled if a PCI interrupt exists..
*/
bridge = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
- bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN | CB_BRIDGE_INTR;
+ bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
+ bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
config_writew(socket, CB_BRIDGE_CONTROL, bridge);
}
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
The Windows boot will run chkdsk and then reboot. The user can then
immediately boot into Linux rather than having to do a full Windows
boot first before rebooting into Linux and we will recognize such a
- journal and empty it as it is clean by definition.
+ journal and empty it as it is clean by definition. Note, this only
+ works if chkdsk left the journal in an obviously clean state.
- Support journals ($LogFile) with only one restart page as well as
journals with two different restart pages. We sanity check both and
either use the only sane one or the more recent one of the two in the
my ways.
- Fix various bugs in the runlist merging code. (Based on libntfs
changes by Richard Russon.)
+ - Fix sparse warnings that have crept in over time.
+ - Change ntfs_cluster_free() to require a write locked runlist on entry
+ since we otherwise get into a lock reversal deadlock if a read locked
+ runlist is passed in. In the process also change it to take an ntfs
+ inode instead of a vfs inode as parameter.
+ - Fix the definition of the CHKD ntfs record magic. It had an off by
+ two error causing it to be CHKB instead of CHKD.
2.1.23 - Implement extension of resident files and make writing safe as well as
many bug fixes, cleanups, and enhancements...
magic_RCRD = const_cpu_to_le32(0x44524352), /* Log record page. */
/* Found in $LogFile/$DATA. (May be found in $MFT/$DATA, also?) */
- magic_CHKD = const_cpu_to_le32(0x424b4843), /* Modified by chkdsk. */
+ magic_CHKD = const_cpu_to_le32(0x444b4843), /* Modified by chkdsk. */
/* Found in all ntfs record containing records. */
magic_BAAD = const_cpu_to_le32(0x44414142), /* Failed multi sector
* The _LE versions are to be applied on little endian MFT_REFs.
* Note: The _LE versions will return a CPU endian formatted value!
*/
-typedef enum {
- MFT_REF_MASK_CPU = 0x0000ffffffffffffULL,
- MFT_REF_MASK_LE = const_cpu_to_le64(0x0000ffffffffffffULL),
-} MFT_REF_CONSTS;
+#define MFT_REF_MASK_CPU 0x0000ffffffffffffULL
+#define MFT_REF_MASK_LE const_cpu_to_le64(0x0000ffffffffffffULL)
typedef u64 MFT_REF;
typedef le64 leMFT_REF;
/**
* __ntfs_cluster_free - free clusters on an ntfs volume
- * @vi: vfs inode whose runlist describes the clusters to free
- * @start_vcn: vcn in the runlist of @vi at which to start freeing clusters
+ * @ni: ntfs inode whose runlist describes the clusters to free
+ * @start_vcn: vcn in the runlist of @ni at which to start freeing clusters
* @count: number of clusters to free or -1 for all clusters
- * @write_locked: true if the runlist is locked for writing
* @is_rollback: true if this is a rollback operation
*
* Free @count clusters starting at the cluster @start_vcn in the runlist
- * described by the vfs inode @vi.
+ * described by the vfs inode @ni.
*
* If @count is -1, all clusters from @start_vcn to the end of the runlist are
* deallocated. Thus, to completely free all clusters in a runlist, use
* Return the number of deallocated clusters (not counting sparse ones) on
* success and -errno on error.
*
- * Locking: - The runlist described by @vi must be locked on entry and is
- * locked on return. Note if the runlist is locked for reading the
- * lock may be dropped and reacquired. Note the runlist may be
- * modified when needed runlist fragments need to be mapped.
+ * Locking: - The runlist described by @ni must be locked for writing on entry
+ * and is locked on return. Note the runlist may be modified when
+ * needed runlist fragments need to be mapped.
* - The volume lcn bitmap must be unlocked on entry and is unlocked
* on return.
* - This function takes the volume lcn bitmap lock for writing and
* modifies the bitmap contents.
*/
-s64 __ntfs_cluster_free(struct inode *vi, const VCN start_vcn, s64 count,
- const BOOL write_locked, const BOOL is_rollback)
+s64 __ntfs_cluster_free(ntfs_inode *ni, const VCN start_vcn, s64 count,
+ const BOOL is_rollback)
{
s64 delta, to_free, total_freed, real_freed;
- ntfs_inode *ni;
ntfs_volume *vol;
struct inode *lcnbmp_vi;
runlist_element *rl;
int err;
- BUG_ON(!vi);
+ BUG_ON(!ni);
ntfs_debug("Entering for i_ino 0x%lx, start_vcn 0x%llx, count "
- "0x%llx.%s", vi->i_ino, (unsigned long long)start_vcn,
+ "0x%llx.%s", ni->mft_no, (unsigned long long)start_vcn,
(unsigned long long)count,
is_rollback ? " (rollback)" : "");
- ni = NTFS_I(vi);
vol = ni->vol;
lcnbmp_vi = vol->lcnbmp_ino;
BUG_ON(!lcnbmp_vi);
total_freed = real_freed = 0;
- rl = ntfs_attr_find_vcn_nolock(ni, start_vcn, write_locked);
+ rl = ntfs_attr_find_vcn_nolock(ni, start_vcn, TRUE);
if (IS_ERR(rl)) {
if (!is_rollback)
ntfs_error(vol->sb, "Failed to find first runlist "
/* Attempt to map runlist. */
vcn = rl->vcn;
- rl = ntfs_attr_find_vcn_nolock(ni, vcn, write_locked);
+ rl = ntfs_attr_find_vcn_nolock(ni, vcn, TRUE);
if (IS_ERR(rl)) {
err = PTR_ERR(rl);
if (!is_rollback)
* If rollback fails, set the volume errors flag, emit an error
* message, and return the error code.
*/
- delta = __ntfs_cluster_free(vi, start_vcn, total_freed, write_locked,
- TRUE);
+ delta = __ntfs_cluster_free(ni, start_vcn, total_freed, TRUE);
if (delta < 0) {
ntfs_error(vol->sb, "Failed to rollback (error %i). Leaving "
"inconsistent metadata! Unmount and run "
* lcnalloc.h - Exports for NTFS kernel cluster (de)allocation. Part of the
* Linux-NTFS project.
*
- * Copyright (c) 2004 Anton Altaparmakov
+ * Copyright (c) 2004-2005 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
#include <linux/fs.h>
#include "types.h"
+#include "inode.h"
#include "runlist.h"
#include "volume.h"
const VCN start_vcn, const s64 count, const LCN start_lcn,
const NTFS_CLUSTER_ALLOCATION_ZONES zone);
-extern s64 __ntfs_cluster_free(struct inode *vi, const VCN start_vcn,
- s64 count, const BOOL write_locked, const BOOL is_rollback);
+extern s64 __ntfs_cluster_free(ntfs_inode *ni, const VCN start_vcn,
+ s64 count, const BOOL is_rollback);
/**
* ntfs_cluster_free - free clusters on an ntfs volume
- * @vi: vfs inode whose runlist describes the clusters to free
- * @start_vcn: vcn in the runlist of @vi at which to start freeing clusters
+ * @ni: ntfs inode whose runlist describes the clusters to free
+ * @start_vcn: vcn in the runlist of @ni at which to start freeing clusters
* @count: number of clusters to free or -1 for all clusters
- * @write_locked: true if the runlist is locked for writing
*
* Free @count clusters starting at the cluster @start_vcn in the runlist
- * described by the vfs inode @vi.
+ * described by the ntfs inode @ni.
*
* If @count is -1, all clusters from @start_vcn to the end of the runlist are
* deallocated. Thus, to completely free all clusters in a runlist, use
* Return the number of deallocated clusters (not counting sparse ones) on
* success and -errno on error.
*
- * Locking: - The runlist described by @vi must be locked on entry and is
- * locked on return. Note if the runlist is locked for reading the
- * lock may be dropped and reacquired. Note the runlist may be
- * modified when needed runlist fragments need to be mapped.
+ * Locking: - The runlist described by @ni must be locked for writing on entry
+ * and is locked on return. Note the runlist may be modified when
+ * needed runlist fragments need to be mapped.
* - The volume lcn bitmap must be unlocked on entry and is unlocked
* on return.
* - This function takes the volume lcn bitmap lock for writing and
* modifies the bitmap contents.
*/
-static inline s64 ntfs_cluster_free(struct inode *vi, const VCN start_vcn,
- s64 count, const BOOL write_locked)
+static inline s64 ntfs_cluster_free(ntfs_inode *ni, const VCN start_vcn,
+ s64 count)
{
- return __ntfs_cluster_free(vi, start_vcn, count, write_locked, FALSE);
+ return __ntfs_cluster_free(ni, start_vcn, count, FALSE);
}
extern int ntfs_cluster_free_from_rl_nolock(ntfs_volume *vol,
RESTART_PAGE_HEADER *rp, s64 pos)
{
u32 logfile_system_page_size, logfile_log_page_size;
- u16 usa_count, usa_ofs, usa_end, ra_ofs;
+ u16 ra_ofs, usa_count, usa_ofs, usa_end = 0;
+ BOOL have_usa = TRUE;
ntfs_debug("Entering.");
/*
(int)sle16_to_cpu(rp->minor_ver));
return FALSE;
}
+ /*
+ * If chkdsk has been run the restart page may not be protected by an
+ * update sequence array.
+ */
+ if (ntfs_is_chkd_record(rp->magic) && !le16_to_cpu(rp->usa_count)) {
+ have_usa = FALSE;
+ goto skip_usa_checks;
+ }
/* Verify the size of the update sequence array. */
usa_count = 1 + (logfile_system_page_size >> NTFS_BLOCK_SIZE_BITS);
if (usa_count != le16_to_cpu(rp->usa_count)) {
"inconsistent update sequence array offset.");
return FALSE;
}
+skip_usa_checks:
/*
* Verify the position of the restart area. It must be:
* - aligned to 8-byte boundary,
* - within the system page size.
*/
ra_ofs = le16_to_cpu(rp->restart_area_offset);
- if (ra_ofs & 7 || ra_ofs < usa_end ||
+ if (ra_ofs & 7 || (have_usa ? ra_ofs < usa_end :
+ ra_ofs < sizeof(RESTART_PAGE_HEADER)) ||
ra_ofs > logfile_system_page_size) {
ntfs_error(vi->i_sb, "$LogFile restart page specifies "
"inconsistent restart area offset.");
idx++;
} while (to_read > 0);
}
- /* Perform the multi sector transfer deprotection on the buffer. */
- if (post_read_mst_fixup((NTFS_RECORD*)trp,
+ /*
+ * Perform the multi sector transfer deprotection on the buffer if the
+ * restart page is protected.
+ */
+ if ((!ntfs_is_chkd_record(trp->magic) || le16_to_cpu(trp->usa_count))
+ && post_read_mst_fixup((NTFS_RECORD*)trp,
le32_to_cpu(rp->system_page_size))) {
/*
* A multi sector tranfer error was detected. We only need to
* Otherwise just throw it away.
*/
if (rstr2_lsn > rstr1_lsn) {
+ ntfs_debug("Using second restart page as it is more "
+ "recent.");
ntfs_free(rstr1_ph);
rstr1_ph = rstr2_ph;
/* rstr1_lsn = rstr2_lsn; */
- } else
+ } else {
+ ntfs_debug("Using first restart page as it is more "
+ "recent.");
ntfs_free(rstr2_ph);
+ }
rstr2_ph = NULL;
}
/* All consistency checks passed. */
*/
enum {
RESTART_VOLUME_IS_CLEAN = const_cpu_to_le16(0x0002),
- RESTART_SPACE_FILLER = 0xffff, /* gcc: Force enum bit width to 16. */
+ RESTART_SPACE_FILLER = const_cpu_to_le16(0xffff), /* gcc: Force enum bit width to 16. */
} __attribute__ ((__packed__));
typedef le16 RESTART_AREA_FLAGS;
a = ctx->attr;
a->data.non_resident.highest_vcn = cpu_to_sle64(old_last_vcn - 1);
undo_alloc:
- if (ntfs_cluster_free(vol->mft_ino, old_last_vcn, -1, TRUE) < 0) {
+ if (ntfs_cluster_free(mft_ni, old_last_vcn, -1) < 0) {
ntfs_error(vol->sb, "Failed to free clusters from mft data "
"attribute.%s", es);
NVolSetErrors(vol);
/* start peripherals off after the S3C2410 */
-#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x02000000))
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
/* we put the CPLD registers next, to get them out of the way */
-#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01300000 */
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
-#define ANUBIS_VA_CTRL2 ANUBIS_IOADDR(0x00100000) /* 0x01400000 */
+#define ANUBIS_VA_CTRL2 ANUBIS_IOADDR(0x00100000) /* 0x01900000 */
#define ANUBIS_PA_CTRL2 (ANUBIS_PA_CPLD)
-#define ANUBIS_VA_CTRL3 ANUBIS_IOADDR(0x00200000) /* 0x01500000 */
+#define ANUBIS_VA_CTRL3 ANUBIS_IOADDR(0x00200000) /* 0x01A00000 */
#define ANUBIS_PA_CTRL3 (ANUBIS_PA_CPLD)
-#define ANUBIS_VA_CTRL4 ANUBIS_IOADDR(0x00300000) /* 0x01600000 */
+#define ANUBIS_VA_CTRL4 ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
#define ANUBIS_PA_CTRL4 (ANUBIS_PA_CPLD)
#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
#ifdef __KERNEL__
#define SA_TIMER 0x40000000
-#define SA_IRQNOMASK 0x08000000
#endif
#include <asm-generic/signal.h>
* address.
*/
-static inline void * ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, 0);
}
* On error, the variable @x is set to zero.
*/
#define get_user(x,ptr) \
-({ int __ret_gu,__val_gu; \
+({ int __ret_gu; \
+ unsigned long __val_gu; \
__chk_user_ptr(ptr); \
switch(sizeof (*(ptr))) { \
case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
#define __get_user_nocheck(x,ptr,size) \
({ \
- long __gu_err, __gu_val; \
+ long __gu_err; \
+ unsigned long __gu_val; \
__get_user_size(__gu_val,(ptr),(size),__gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
return n;
}
-unsigned long __generic_copy_to_user(void *, const void *, unsigned long);
-unsigned long __generic_copy_from_user(void *, const void *, unsigned long);
+unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long);
+unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long);
/**
* __copy_to_user: - Copy a block of data into user space, with less checking.
/* for real multi-function devices */
__u8 function;
- /* for pseude multi-function devices */
+ /* for pseudo multi-function devices */
__u8 device_no;
- __u32 prod_id_hash[4];
+ __u32 prod_id_hash[4]
+ __attribute__((aligned(sizeof(__u32))));
/* not matched against in kernelspace*/
#ifdef __KERNEL__
#define PCI_DEVICE_ID_TI_TVP4010 0x3d04
#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
#define PCI_DEVICE_ID_TI_4450 0x8011
+#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031
+#define PCI_DEVICE_ID_TI_X515 0x8036
#define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15
#define PCI_DEVICE_ID_TI_4451 0xac42
#define PCI_DEVICE_ID_TI_4510 0xac44
#define PCI_DEVICE_ID_TI_4520 0xac46
+#define PCI_DEVICE_ID_TI_7510 0xac47
+#define PCI_DEVICE_ID_TI_7610 0xac48
+#define PCI_DEVICE_ID_TI_7410 0xac49
#define PCI_DEVICE_ID_TI_1410 0xac50
#define PCI_DEVICE_ID_TI_1420 0xac51
#define PCI_DEVICE_ID_TI_1451A 0xac52
#define PCI_DEVICE_ID_TI_1620 0xac54
#define PCI_DEVICE_ID_TI_1520 0xac55
#define PCI_DEVICE_ID_TI_1510 0xac56
+#define PCI_DEVICE_ID_TI_X620 0xac8d
+#define PCI_DEVICE_ID_TI_X420 0xac8e
#define PCI_VENDOR_ID_SONY 0x104d
#define PCI_DEVICE_ID_SONY_CXD3222 0x8039
#define PCI_DEVICE_ID_ENE_1211 0x1211
#define PCI_DEVICE_ID_ENE_1225 0x1225
#define PCI_DEVICE_ID_ENE_1410 0x1410
+#define PCI_DEVICE_ID_ENE_710 0x1411
+#define PCI_DEVICE_ID_ENE_712 0x1412
#define PCI_DEVICE_ID_ENE_1420 0x1420
+#define PCI_DEVICE_ID_ENE_720 0x1421
+#define PCI_DEVICE_ID_ENE_722 0x1422
+
#define PCI_VENDOR_ID_CHELSIO 0x1425
#define PCI_VENDOR_ID_MIPS 0x153f
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/bulkmem.h>
+#ifdef CONFIG_CARDBUS
+#include <linux/pci.h>
+#endif
/* Definitions for card status flags for GetStatus */
#define SS_WRPROT 0x0001
/* so is power hook */
int (*power_hook)(struct pcmcia_socket *sock, int operation);
-
+#ifdef CONFIG_CARDBUS
+ /* allows tuning the CB bridge before loading driver for the CB card */
+ void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
+#endif
+
/* state thread */
struct semaphore skt_sem; /* protects socket h/w state */
{
unsigned int i;
+ id->match_flags = TO_NATIVE(id->match_flags);
id->manf_id = TO_NATIVE(id->manf_id);
id->card_id = TO_NATIVE(id->card_id);
id->func_id = TO_NATIVE(id->func_id);
id->function = TO_NATIVE(id->function);
id->device_no = TO_NATIVE(id->device_no);
+
for (i=0; i<4; i++) {
id->prod_id_hash[i] = TO_NATIVE(id->prod_id_hash[i]);
}
projects / deliverable / linux.git / commitdiff
