There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
+A stand-alone version of the module (which should build for any 2.6 kernel)
+is available via (http://github.com/ericvh/9p-sac/tree/master)
+
News and other information is maintained on SWiK (http://swik.net/v9fs).
Bug reports may be issued through the kernel.org bugzilla
F: drivers/media/video/gspca/pac207.c
GSPCA SN9C20X SUBDRIVER
-P: Brian Johnson
-M: brijohn@gmail.com
+M: Brian Johnson <brijohn@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
#
# SA11x0 Implementations
# CONFIG_SA1100_SIMPAD is not set
CONFIG_SA1100_SSP=y
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
#
# Processor Type
#
#
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
CONFIG_FORCE_MAX_ZONEORDER=9
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
CONFIG_SA1100_FIR=m
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+
#
# I2C GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SA1100 is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
#
# Display device support
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
}
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
+
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
* page. This ensures that data in the physical page is mutually
* coherent with the kernels mapping.
*/
- __cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+ /*
+ * kmap_atomic() doesn't set the page virtual address, and
+ * kunmap_atomic() takes care of cache flushing already.
+ */
+ if (page_address(page))
+#endif
+ __cpuc_flush_dcache_page(page_address(page));
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
{
unsigned int idx;
unsigned long vaddr;
+ void *kmap;
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
+ kmap = kmap_high_get(page);
+ if (kmap)
+ return kmap;
+
idx = type + KM_TYPE_NR * smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
#else
(void) idx; /* to kill a warning */
#endif
+ } else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+ /* this address was obtained through kmap_high_get() */
+ kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
}
pagefault_enable();
}
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
+#include <linux/init.h>
+
/*
* GENERIC_GPIO primitives.
*/
.debounce_max = 20,
.debounce_rep = 4,
.debounce_tol = 5,
+
+ .keep_vref_on = true,
+ .settle_delay_usecs = 500,
+ .penirq_recheck_delay_usecs = 100,
};
static struct spi_board_info __initdata spi1_board_info[] = {
brne 1f
/* At this point, "from" is word-aligned */
-2: sub r10, 4
- mov r9, r12
+2: mov r9, r12
+5: sub r10, 4
brlt 4f
3: ld.w r8, r11++
/* Handle unaligned "from" pointer */
1: sub r10, 4
+ movlt r9, r12
brlt 4b
add r10, r9
lsl r9, 2
st.b r12++, r8
ld.ub r8, r11++
st.b r12++, r8
- rjmp 2b
+ mov r8, r12
+ add pc, pc, r9
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ mov r9, r8
+ rjmp 5b
tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
return NULL;
pte = kmap(page);
- if (pte) {
- __flush_page_to_ram(pte);
- flush_tlb_kernel_page(pte);
- nocache_page(pte);
- }
- kunmap(pte);
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ kunmap(page);
pgtable_page_ctor(page);
return page;
}
#endif
#ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
/*
* Macro to mark a page protection value as "uncacheable".
*/
? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
: (prot)))
+#include <asm-generic/pgtable.h>
#endif /* !__ASSEMBLY__ */
/*
#define __NR_inotify_init1 328
#define __NR_preadv 329
#define __NR_pwritev 330
+#define __NR_rt_tgsigqueueinfo 331
+#define __NR_perf_counter_open 332
#ifdef __KERNEL__
-#define NR_syscalls 331
+#define NR_syscalls 333
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
/* Kill the user process later */
regs->iaoq[0] = 0 | 3;
regs->iaoq[1] = regs->iaoq[0] + 4;
- regs->iasq[0] = regs->iasq[0] = regs->sr[7];
+ regs->iasq[0] = regs->iasq[1] = regs->sr[7];
regs->gr[0] &= ~PSW_B;
return;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri May 15 10:37:00 2009
+# Linux kernel version: 2.6.31-rc7
+# Mon Aug 24 17:38:50 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S_64=y
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
#
# Cell Broadband Engine options
#
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
+# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
-CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
#
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PPC=y
CONFIG_SND_PS3=m
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <asm/firmware.h>
#include <asm/rtc.h>
#include <asm/lv1call.h>
#include <asm/ps3.h>
{
struct platform_device *pdev;
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return -ENODEV;
+
pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
__setup("condev=", condev_setup);
+static void __init set_preferred_console(void)
+{
+ if (MACHINE_IS_KVM) {
+ add_preferred_console("hvc", 0, NULL);
+ s390_virtio_console_init();
+ return;
+ }
+
+ if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+ add_preferred_console("ttyS", 0, NULL);
+ if (CONSOLE_IS_3270)
+ add_preferred_console("tty3270", 0, NULL);
+}
+
static int __init conmode_setup(char *str)
{
#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
if (strncmp(str, "3270", 5) == 0)
SET_CONSOLE_3270;
#endif
+ set_preferred_console();
return 1;
}
void __init
setup_arch(char **cmdline_p)
{
- /* set up preferred console */
- add_preferred_console("ttyS", 0, NULL);
-
/*
* print what head.S has found out about the machine
*/
if (MACHINE_IS_VM)
pr_info("Linux is running as a z/VM "
"guest operating system in 64-bit mode\n");
- else if (MACHINE_IS_KVM) {
+ else if (MACHINE_IS_KVM)
pr_info("Linux is running under KVM in 64-bit mode\n");
- add_preferred_console("hvc", 0, NULL);
- s390_virtio_console_init();
- } else
+ else
pr_info("Linux is running natively in 64-bit mode\n");
#endif /* CONFIG_64BIT */
/* Setup default console */
conmode_default();
+ set_preferred_console();
/* Setup zfcpdump support */
setup_zfcpdump(console_devno);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 04:04:46 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:45:52 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 16 04:59:36 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:56:02 2009
#
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_OF=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# Miscellaneous USB options
#
-CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
extern pte_t pgoff_to_pte(unsigned long);
#define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL)
-extern unsigned long *sparc64_valid_addr_bitmap;
+extern unsigned long sparc64_valid_addr_bitmap[];
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
- (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+static inline bool kern_addr_valid(unsigned long addr)
+{
+ unsigned long paddr = __pa(addr);
+
+ if ((paddr >> 41UL) != 0UL)
+ return false;
+ return test_bit(paddr >> 22, sparc64_valid_addr_bitmap);
+}
extern int page_in_phys_avail(unsigned long paddr);
* Must preserve %g1 and %g6 (TAG).
*/
kvmap_dtlb_tsb4m_miss:
- sethi %hi(kpte_linear_bitmap), %g2
- or %g2, %lo(kpte_linear_bitmap), %g2
+ /* Clear the PAGE_OFFSET top virtual bits, shift
+ * down to get PFN, and make sure PFN is in range.
+ */
+ sllx %g4, 21, %g5
- /* Clear the PAGE_OFFSET top virtual bits, then shift
- * down to get a 256MB physical address index.
+ /* Check to see if we know about valid memory at the 4MB
+ * chunk this physical address will reside within.
*/
+ srlx %g5, 21 + 41, %g2
+ brnz,pn %g2, kvmap_dtlb_longpath
+ nop
+
+ /* This unconditional branch and delay-slot nop gets patched
+ * by the sethi sequence once the bitmap is properly setup.
+ */
+ .globl valid_addr_bitmap_insn
+valid_addr_bitmap_insn:
+ ba,pt %xcc, 2f
+ nop
+ .subsection 2
+ .globl valid_addr_bitmap_patch
+valid_addr_bitmap_patch:
+ sethi %hi(sparc64_valid_addr_bitmap), %g7
+ or %g7, %lo(sparc64_valid_addr_bitmap), %g7
+ .previous
+
+ srlx %g5, 21 + 22, %g2
+ srlx %g2, 6, %g5
+ and %g2, 63, %g2
+ sllx %g5, 3, %g5
+ ldx [%g7 + %g5], %g5
+ mov 1, %g7
+ sllx %g7, %g2, %g7
+ andcc %g5, %g7, %g0
+ be,pn %xcc, kvmap_dtlb_longpath
+
+2: sethi %hi(kpte_linear_bitmap), %g2
+ or %g2, %lo(kpte_linear_bitmap), %g2
+
+ /* Get the 256MB physical address index. */
sllx %g4, 21, %g5
mov 1, %g7
srlx %g5, 21 + 28, %g5
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4d_boot_cpus(void)
{
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
-
/* Ok, they are spinning and ready to go. */
smp_processors_ready = 1;
sun4d_distribute_irqs();
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4m_boot_cpus(void)
{
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- if (!cpu_isset(1, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(2, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(3, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
- }
-
/* Ok, they are spinning and ready to go. */
}
SIGN1(sys32_getsockname, sys_getsockname, %o0)
SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
-SIGN2(sys32_splice, sys_splice, %o0, %o1)
+SIGN2(sys32_splice, sys_splice, %o0, %o2)
SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
SIGN2(sys32_tee, sys_tee, %o0, %o1)
SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
+SIGN1(sys32_truncate, sys_truncate, %o1)
+SIGN1(sys32_ftruncate, sys_ftruncate, %o1)
.globl sys32_mmap2
sys32_mmap2:
/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
/*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
- .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+ .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate
+/*130*/ .word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
*/
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", tsk->comm);
- if (from_user)
- do_group_exit(SIGKILL);
+ if (from_user) {
+ pagefault_out_of_memory();
+ return;
+ }
goto no_context;
do_sigbus:
out_of_memory:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", current->comm);
- if (!(regs->tstate & TSTATE_PRIV))
- do_group_exit(SIGKILL);
+ if (!(regs->tstate & TSTATE_PRIV)) {
+ pagefault_out_of_memory();
+ return;
+ }
goto handle_kernel_fault;
intr_or_no_mm:
cmp_p64, NULL);
}
-unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES /
+ sizeof(unsigned long)];
EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
/* Kernel physical address base and size in bytes. */
* memory list again, and make sure it provides at least as much
* memory as 'pavail' does.
*/
-static void __init setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap)
{
int i;
if (new_start <= old_start &&
new_end >= (old_start + PAGE_SIZE)) {
- set_bit(old_start >> 22,
- sparc64_valid_addr_bitmap);
+ set_bit(old_start >> 22, bitmap);
goto do_next_page;
}
}
}
}
+static void __init patch_tlb_miss_handler_bitmap(void)
+{
+ extern unsigned int valid_addr_bitmap_insn[];
+ extern unsigned int valid_addr_bitmap_patch[];
+
+ valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1];
+ mb();
+ valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0];
+ flushi(&valid_addr_bitmap_insn[0]);
+}
+
void __init mem_init(void)
{
unsigned long codepages, datapages, initpages;
unsigned long addr, last;
- int i;
-
- i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
- i += 1;
- sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
- if (sparc64_valid_addr_bitmap == NULL) {
- prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
- prom_halt();
- }
- memset(sparc64_valid_addr_bitmap, 0, i << 3);
addr = PAGE_OFFSET + kern_base;
last = PAGE_ALIGN(kern_size) + addr;
addr += PAGE_SIZE;
}
- setup_valid_addr_bitmap_from_pavail();
+ setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap);
+ patch_tlb_miss_handler_bitmap();
high_memory = __va(last_valid_pfn << PAGE_SHIFT);
#ifdef CONFIG_NEED_MULTIPLE_NODES
- for_each_online_node(i) {
- if (NODE_DATA(i)->node_spanned_pages != 0) {
- totalram_pages +=
- free_all_bootmem_node(NODE_DATA(i));
+ {
+ int i;
+ for_each_online_node(i) {
+ if (NODE_DATA(i)->node_spanned_pages != 0) {
+ totalram_pages +=
+ free_all_bootmem_node(NODE_DATA(i));
+ }
}
}
#else
* marked non-static so that assembler code can get at them.
*/
-#define MAX_PHYS_ADDRESS (1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
+#define MAX_PHYS_ADDRESS (1UL << 41UL)
+#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
#define KPTE_BITMAP_BYTES \
((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#define VALID_ADDR_BITMAP_CHUNK_SZ (4UL * 1024UL * 1024UL)
+#define VALID_ADDR_BITMAP_BYTES \
+ ((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
extern unsigned long kern_linear_pte_xor[2];
extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
#define _ASM_X86_PGTABLE_H
#include <asm/page.h>
+#include <asm/e820.h>
#include <asm/pgtable_types.h>
#define canon_pgprot(p) __pgprot(massage_pgprot(p))
-static inline int is_new_memtype_allowed(unsigned long flags,
- unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+ unsigned long flags,
+ unsigned long new_flags)
{
+ /*
+ * PAT type is always WB for ISA. So no need to check.
+ */
+ if (is_ISA_range(paddr, paddr + size - 1))
+ return 1;
+
/*
* Certain new memtypes are not allowed with certain
* requested memtype:
NULL,
};
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
}
+ if (is_vsmp_box()) {
+ /* need to update phys_pkg_id */
+ apic->phys_pkg_id = apicid_phys_pkg_id;
+ }
+
/*
* Now that apic routing model is selected, configure the
* fault handling for intr remapping.
CFLAGS_REMOVE_common.o = -pg
endif
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o := $(nostackp)
+
obj-y := intel_cacheinfo.o addon_cpuid_features.o
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o
* which will be freed later
*/
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
#ifdef CONFIG_SMP
ENTRY(startup_32_smp)
#endif
iret
-#ifndef CONFIG_HOTPLUG_CPU
- __CPUINITDATA
-#else
__REFDATA
-#endif
.align 4
ENTRY(initial_code)
.long i386_start_kernel
if (!cpumask_test_cpu(cpu, c1e_mask)) {
cpumask_set_cpu(cpu, c1e_mask);
/*
- * Force broadcast so ACPI can not interfere. Needs
- * to run with interrupts enabled as it uses
- * smp_function_call.
+ * Force broadcast so ACPI can not interfere.
*/
- local_irq_enable();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
cpu);
- local_irq_disable();
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
data PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(7); /* RWE */
#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
+ init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
__stop___ex_table = .;
} :text = 0x9090
- RODATA
+ RO_DATA(PAGE_SIZE)
/* Data */
- . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
- DATA_DATA
- CONSTRUCTORS
- } :data
+
+ /* init_task */
+ INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
- /* 32 bit has nosave before _edata */
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
+ /* 32 bit has nosave before _edata */
+ NOSAVE_DATA
#endif
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data.idt)
- }
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
- .data.cacheline_aligned :
- AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
+ CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
- /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ DATA_DATA
+ CONSTRUCTORS
+
+ /* rarely changed data like cpu maps */
+ READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
- }
+ } :data
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
#endif /* CONFIG_X86_64 */
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
}
-#ifdef CONFIG_X86_64
- :data.init
-#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
- * smp_locks might be freed after init
- * start/end must be page aligned
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - .init.text - should
+ * start another segment - init.
*/
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- }
+ PERCPU_VADDR(0, :percpu)
+#endif
- /* Init code and data - will be freed after init */
- . = ALIGN(PAGE_SIZE);
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .; /* paired with __init_end */
_sinittext = .;
INIT_TEXT
_einittext = .;
}
+#ifdef CONFIG_X86_64
+ :init
+#endif
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
__init_end = .;
}
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2
- /* use another section data.init2, see PERCPU_VADDR() above */
+ NOSAVE_DATA
+ }
#endif
/* BSS */
return ret;
#else
- reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+ reserve_bootmem(phys, len, flags);
#endif
if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
return ret;
if (flags != want_flags) {
- if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+ if (strict_prot ||
+ !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
free_memtype(paddr, paddr + size);
printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
" for %Lx-%Lx, got %s\n",
CFLAGS_REMOVE_irq.o = -pg
endif
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o := $(nostackp)
+
obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
(1 << X86_FEATURE_ACPI)); /* disable ACPI */
ax = 1;
+ cx = 0;
xen_cpuid(&ax, &bx, &cx, &dx);
/* cpuid claims we support xsave; try enabling it to see what happens */
xen_domain_type = XEN_PV_DOMAIN;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
- xen_setup_features();
-
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
- xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+ /*
+ * Setup percpu state. We only need to do this for 64-bit
+ * because 32-bit already has %fs set properly.
+ */
+ load_percpu_segment(0);
+#endif
+ xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
set_xen_basic_apic_ops();
#endif
+ xen_setup_features();
+
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
machine_ops = xen_machine_ops;
-#ifdef CONFIG_X86_64
- /*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
- */
- load_percpu_segment(0);
-#endif
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
+ new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a buffer by now */
buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a string by now */
buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
{
int result = 0;
+ if (acpi_disabled)
+ return 0;
+
memset(&errata, 0, sizeof(errata));
#ifdef CONFIG_SMP
static void __exit acpi_processor_exit(void)
{
+ if (acpi_disabled)
+ return;
+
acpi_processor_ppc_exit();
acpi_thermal_cpufreq_exit();
pr->power.timer_broadcast_on_state = state;
}
-static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(void *arg)
{
+ struct acpi_processor *pr = (struct acpi_processor *) arg;
unsigned long reason;
reason = pr->power.timer_broadcast_on_state < INT_MAX ?
working++;
}
- lapic_timer_propagate_broadcast(pr);
+ smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
+ pr, 1);
return (working);
}
if (pr->limit.thermal.tx > tx)
tx = pr->limit.thermal.tx;
- result = acpi_processor_set_throttling(pr, tx);
+ result = acpi_processor_set_throttling(pr, tx, false);
if (result)
goto end;
}
if (state <= max_pstate) {
if (pr->flags.throttling && pr->throttling.state)
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
cpufreq_set_cur_state(pr->id, state);
} else {
cpufreq_set_cur_state(pr->id, max_pstate);
result = acpi_processor_set_throttling(pr,
- state - max_pstate);
+ state - max_pstate, false);
}
return result;
}
#define THROTTLING_POSTCHANGE (2)
static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
static int acpi_processor_update_tsd_coord(void)
{
*/
target_state = throttling_limit;
}
- return acpi_processor_set_throttling(pr, target_state);
+ return acpi_processor_set_throttling(pr, target_state, false);
}
/*
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
- ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset"));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Invalid throttling state, reset\n"));
state = 0;
- ret = acpi_processor_set_throttling(pr, state);
+ ret = acpi_processor_set_throttling(pr, state, true);
if (ret)
return ret;
}
}
static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
u32 value = 0;
u32 duty_mask = 0;
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
}
static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
int ret;
acpi_integer value;
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
return 0;
}
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force)
{
cpumask_var_t saved_mask;
int ret = 0;
/* FIXME: use work_on_cpu() */
set_cpus_allowed_ptr(current, cpumask_of(pr->id));
ret = p_throttling->acpi_processor_set_throttling(pr,
- t_state.target_state);
+ t_state.target_state, force);
} else {
/*
* When the T-state coordination is SW_ALL or HW_ALL,
set_cpus_allowed_ptr(current, cpumask_of(i));
ret = match_pr->throttling.
acpi_processor_set_throttling(
- match_pr, t_state.target_state);
+ match_pr, t_state.target_state, force);
}
}
/*
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Disabling throttling (was T%d)\n",
pr->throttling.state));
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
if (result)
goto end;
}
if (strcmp(tmpbuf, charp) != 0)
return -EINVAL;
- result = acpi_processor_set_throttling(pr, state_val);
+ result = acpi_processor_set_throttling(pr, state_val, false);
if (result)
return result;
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- sysfs_remove_link(&device->backlight->dev.kobj, "device");
- backlight_device_unregister(device->backlight);
+ if (device->backlight) {
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
+ backlight_device_unregister(device->backlight);
+ device->backlight = NULL;
+ }
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
"thermal_cooling");
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(piix_lock);
+
/**
* piix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&piix_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
}
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&piix_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
if (ap->udma_mask)
pci_read_config_byte(dev, 0x48, &udma_enable);
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
* be obtained while the delayed work queue halt ensures that no more
* data is fed to the ldisc.
*
- * In order to wait for any existing references to complete see
- * tty_ldisc_wait_idle.
+ * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
+ * in order to make sure any currently executing ldisc work is also
+ * flushed.
*/
static int tty_ldisc_halt(struct tty_struct *tty)
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* Make sure the old ldisc is quiescent */
+ tty_ldisc_halt(tty);
+ flush_scheduled_work();
+
/* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
- tty_ldisc_halt(tty);
tty_ldisc_reinit(tty);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
*/
struct list_head inactive_list;
+ /** LRU list of objects with fence regs on them. */
+ struct list_head fence_list;
+
/**
* List of breadcrumbs associated with GPU requests currently
* outstanding.
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
+ /** This object's place on the fenced object LRU */
+ struct list_head fence_list;
+
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
uint32_t read_domains = args->read_domains;
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+ /* Update the LRU on the fence for the CPU access that's
+ * about to occur.
+ */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list,
+ &dev_priv->mm.fence_list);
+ }
+
/* Silently promote "you're not bound, there was nothing to do"
* to success, since the client was just asking us to
* make sure everything was done.
}
/* Need a new fence register? */
- if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret) {
mutex_unlock(&dev->struct_mutex);
struct drm_i915_gem_object *old_obj_priv = NULL;
int i, ret, avail;
+ /* Just update our place in the LRU if our fence is getting used. */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+ return 0;
+ }
+
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
WARN(1, "allocating a fence for non-tiled object?\n");
}
/* First try to find a free reg */
-try_again:
avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- uint32_t seqno = dev_priv->mm.next_gem_seqno;
+ struct drm_gem_object *old_obj = NULL;
if (avail == 0)
return -ENOSPC;
- for (i = dev_priv->fence_reg_start;
- i < dev_priv->num_fence_regs; i++) {
- uint32_t this_seqno;
+ list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+ fence_list) {
+ old_obj = old_obj_priv->obj;
- reg = &dev_priv->fence_regs[i];
- old_obj_priv = reg->obj->driver_private;
+ reg = &dev_priv->fence_regs[old_obj_priv->fence_reg];
if (old_obj_priv->pin_count)
continue;
+ /* Take a reference, as otherwise the wait_rendering
+ * below may cause the object to get freed out from
+ * under us.
+ */
+ drm_gem_object_reference(old_obj);
+
/* i915 uses fences for GPU access to tiled buffers */
if (IS_I965G(dev) || !old_obj_priv->active)
break;
- /* find the seqno of the first available fence */
- this_seqno = old_obj_priv->last_rendering_seqno;
- if (this_seqno != 0 &&
- reg->obj->write_domain == 0 &&
- i915_seqno_passed(seqno, this_seqno))
- seqno = this_seqno;
- }
-
- /*
- * Now things get ugly... we have to wait for one of the
- * objects to finish before trying again.
- */
- if (i == dev_priv->num_fence_regs) {
- if (seqno == dev_priv->mm.next_gem_seqno) {
- i915_gem_flush(dev,
- I915_GEM_GPU_DOMAINS,
- I915_GEM_GPU_DOMAINS);
- seqno = i915_add_request(dev, NULL,
- I915_GEM_GPU_DOMAINS);
- if (seqno == 0)
- return -ENOMEM;
- }
-
- ret = i915_wait_request(dev, seqno);
- if (ret)
+ /* This brings the object to the head of the LRU if it
+ * had been written to. The only way this should
+ * result in us waiting longer than the expected
+ * optimal amount of time is if there was a
+ * fence-using buffer later that was read-only.
+ */
+ i915_gem_object_flush_gpu_write_domain(old_obj);
+ ret = i915_gem_object_wait_rendering(old_obj);
+ if (ret != 0)
return ret;
- goto try_again;
+ break;
}
/*
* for this object next time we need it.
*/
i915_gem_release_mmap(reg->obj);
+ i = old_obj_priv->fence_reg;
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&old_obj_priv->fence_list);
+ drm_gem_object_unreference(old_obj);
}
obj_priv->fence_reg = i;
+ list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
reg->obj = obj;
if (IS_I965G(dev))
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&obj_priv->fence_list);
}
/**
* Pre-965 chips need a fence register set up in order to
* properly handle tiled surfaces.
*/
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
obj_priv->obj = obj;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
+ INIT_LIST_HEAD(&obj_priv->fence_list);
return 0;
}
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.request_list);
+ INIT_LIST_HEAD(&dev_priv->mm.fence_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
return NULL;
}
+static u16
+get_blocksize(void *p)
+{
+ u16 *block_ptr, block_size;
+
+ block_ptr = (u16 *)((char *)p - 2);
+ block_size = *block_ptr;
+ return block_size;
+}
+
static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
struct lvds_dvo_timing *dvo_timing)
}
}
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_general_definitions *general;
+ const int crt_bus_map_table[] = {
+ GPIOB,
+ GPIOA,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ };
+
+ /* Set sensible defaults in case we can't find the general block
+ or it is the wrong chipset */
+ dev_priv->crt_ddc_bus = -1;
+
+ general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+ if (general) {
+ u16 block_size = get_blocksize(general);
+ if (block_size >= sizeof(*general)) {
+ int bus_pin = general->crt_ddc_gmbus_pin;
+ DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+ if ((bus_pin >= 1) && (bus_pin <= 6)) {
+ dev_priv->crt_ddc_bus =
+ crt_bus_map_table[bus_pin-1];
+ }
+ } else {
+ DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+ block_size);
+ }
+ }
+}
+
static void
parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
struct bdb_general_definitions *p_defs;
struct child_device_config *p_child;
int i, child_device_num, count;
- u16 block_size, *block_ptr;
+ u16 block_size;
p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (!p_defs) {
return;
}
/* get the block size of general definitions */
- block_ptr = (u16 *)((char *)p_defs - 2);
- block_size = *block_ptr;
+ block_size = get_blocksize(p_defs);
/* get the number of child device */
child_device_num = (block_size - sizeof(*p_defs)) /
sizeof(*p_child);
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
+ parse_general_definitions(dev_priv, bdb);
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
{
struct drm_connector *connector;
struct intel_output *intel_output;
+ struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
/* Set up the DDC bus. */
if (IS_IGDNG(dev))
i2c_reg = PCH_GPIOA;
- else
+ else {
i2c_reg = GPIOA;
+ /* Use VBT information for CRT DDC if available */
+ if (dev_priv->crt_ddc_bus != -1)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }
intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
}
intel_output->type = INTEL_OUTPUT_ANALOG;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
intel_clock_t clock;
int err = target;
- if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
(I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
if (is_sdvo) {
dpll |= DPLL_DVO_HIGH_SPEED;
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- if (IS_I945G(dev) || IS_I945GM(dev))
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
- if (type_mask & (1 << intel_output->type))
+ if (type_mask & intel_output->clone_mask)
index_mask |= (1 << entry);
entry++;
}
intel_dp_init(dev, PCH_DP_D);
} else if (IS_I9XX(dev)) {
- int found;
- u32 reg;
+ bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+
if (!found && SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (IS_G4X(dev))
- reg = SDVOC;
- else
- reg = SDVOB;
- if (I915_READ(reg) & SDVO_DETECTED) {
+ if (I915_READ(SDVOB) & SDVO_DETECTED)
found = intel_sdvo_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+ if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+ if (SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_C);
}
+
if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D);
} else
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
struct drm_encoder *encoder = &intel_output->enc;
- int crtc_mask = 0, clone_mask = 0;
- /* valid crtcs */
- switch(intel_output->type) {
- case INTEL_OUTPUT_HDMI:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_HDMI));
- break;
- case INTEL_OUTPUT_DVO:
- case INTEL_OUTPUT_SDVO:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_ANALOG:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_LVDS:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_LVDS);
- break;
- case INTEL_OUTPUT_TVOUT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_TVOUT);
- break;
- case INTEL_OUTPUT_DISPLAYPORT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
- break;
- case INTEL_OUTPUT_EDP:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_EDP);
- break;
- }
- encoder->possible_crtcs = crtc_mask;
- encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+ encoder->possible_crtcs = intel_output->crtc_mask;
+ encoder->possible_clones = intel_connector_clones(dev,
+ intel_output->clone_mask);
}
}
else
intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+ if (output_reg == DP_B)
+ intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+ else if (output_reg == DP_C)
+ intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+ else if (output_reg == DP_D)
+ intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+ if (IS_eDP(intel_output)) {
+ intel_output->crtc_mask = (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_OUTPUT_EDP);
+ } else
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_OUTPUT_EDP 8
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
bool needs_tv_clock;
void *dev_priv;
void (*hot_plug)(struct intel_output *);
+ int crtc_mask;
+ int clone_mask;
};
struct intel_crtc {
continue;
intel_output->type = INTEL_OUTPUT_DVO;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_TMDS_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_LVDS_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
/* Set up the DDC bus. */
- if (sdvox_reg == SDVOB)
+ if (sdvox_reg == SDVOB) {
+ intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
- else if (sdvox_reg == SDVOC)
+ } else if (sdvox_reg == SDVOC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
- else if (sdvox_reg == HDMIB)
+ } else if (sdvox_reg == HDMIB) {
+ intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
- else if (sdvox_reg == HDMIC)
+ } else if (sdvox_reg == HDMIC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
- else if (sdvox_reg == HDMID)
+ } else if (sdvox_reg == HDMID) {
+ intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
-
+ }
if (!intel_output->ddc_bus)
goto err_connector;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
+ intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
caps++;
if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
caps++;
if (sdvo_priv->caps.output_flags &
(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
intel_sdvo_set_colorimetry(intel_output,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ intel_output->clone_mask =
+ (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
}
} else if (flags & SDVO_OUTPUT_SVID0) {
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
intel_output->needs_tv_clock = true;
+ intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_RGB0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_RGB1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else {
unsigned char bytes[2];
bytes[0], bytes[1]);
ret = false;
}
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
if (ret && registered)
ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
if (!intel_output) {
return;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
tv_priv = (struct intel_tv_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_TVOUT;
+ intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
intel_output->dev_priv = tv_priv;
}
robj = gobj->driver_private;
r = radeon_object_busy_domain(robj, &cur_placement);
- if (cur_placement == TTM_PL_VRAM)
+ switch (cur_placement) {
+ case TTM_PL_VRAM:
args->domain = RADEON_GEM_DOMAIN_VRAM;
- if (cur_placement == TTM_PL_FLAG_TT)
+ break;
+ case TTM_PL_TT:
args->domain = RADEON_GEM_DOMAIN_GTT;
- if (cur_placement == TTM_PL_FLAG_SYSTEM)
+ break;
+ case TTM_PL_SYSTEM:
args->domain = RADEON_GEM_DOMAIN_CPU;
+ default:
+ break;
+ }
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(gobj);
mutex_unlock(&dev->struct_mutex);
unsigned int cmd, void __user *argp)
{
struct input_dev *dev = joydev->handle.dev;
+ size_t len;
int i, j;
+ const char *name;
+ /* Process fixed-sized commands. */
switch (cmd) {
case JS_SET_CAL:
return copy_to_user(argp, joydev->corr,
sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
- case JSIOCSAXMAP:
- if (copy_from_user(joydev->abspam, argp,
- sizeof(__u8) * (ABS_MAX + 1)))
+ }
+
+ /*
+ * Process variable-sized commands (the axis and button map commands
+ * are considered variable-sized to decouple them from the values of
+ * ABS_MAX and KEY_MAX).
+ */
+ switch (cmd & ~IOCSIZE_MASK) {
+
+ case (JSIOCSAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ /*
+ * FIXME: we should not copy into our axis map before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->abspam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
}
return 0;
- case JSIOCGAXMAP:
- return copy_to_user(argp, joydev->abspam,
- sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0;
-
- case JSIOCSBTNMAP:
- if (copy_from_user(joydev->keypam, argp,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)))
+ case (JSIOCGAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0;
+
+ case (JSIOCSBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ /*
+ * FIXME: we should not copy into our keymap before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->keypam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nkey; i++) {
return 0;
- case JSIOCGBTNMAP:
- return copy_to_user(argp, joydev->keypam,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0;
+ case (JSIOCGBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0;
- default:
- if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
- int len;
- const char *name = dev->name;
-
- if (!name)
- return 0;
- len = strlen(name) + 1;
- if (len > _IOC_SIZE(cmd))
- len = _IOC_SIZE(cmd);
- if (copy_to_user(argp, name, len))
- return -EFAULT;
- return len;
- }
+ case JSIOCGNAME(0):
+ name = dev->name;
+ if (!name)
+ return 0;
+
+ len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1);
+ return copy_to_user(argp, name, len) ? -EFAULT : len;
}
+
return -EINVAL;
}
{ 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
+ { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce },
{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //?
{ USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */
{ USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */
{ USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */
+ { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */
{ USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */
{ USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */
{ USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */
return result;
}
+static int wacom_query_tablet_data(struct usb_interface *intf)
+{
+ unsigned char *rep_data;
+ int limit = 0;
+ int error;
+
+ rep_data = kmalloc(2, GFP_KERNEL);
+ if (!rep_data)
+ return -ENOMEM;
+
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+
+ kfree(rep_data);
+
+ return error < 0 ? error : 0;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
- char rep_data[2], limit = 0;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
- * Repeat until it succeeds
+ * Note that if query fails it is not a hard failure.
*/
- if (wacom_wac->features->type != TABLETPC) {
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- 2, rep_data, 2);
- if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, 2,
- rep_data, 2);
- } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
- }
+ if (wacom_wac->features->type != TABLETPC)
+ wacom_query_tablet_data(intf);
usb_set_intfdata(intf, wacom);
return 0;
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX) {
+ if (isr & UCB_IE_TSPX)
ucb1400_ts_irq_disable(ucb->ac97);
- enable_irq(ucb->irq);
- } else
- printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ else
+ dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
static int ucb1400_ts_probe(struct platform_device *dev)
{
int error, x_res, y_res;
+ u16 fcsr;
struct ucb1400_ts *ucb = dev->dev.platform_data;
ucb->ts_idev = input_allocate_device();
ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ /*
+ * Enable ADC filter to prevent horrible jitter on Colibri.
+ * This also further reduces jitter on boards where ADCSYNC
+ * pin is connected.
+ */
+ fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+ ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
gpio_data->inverted = !!inverted;
+ /* After inverting, we need to update the LED. */
+ schedule_work(&gpio_data->work);
+
return n;
}
static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
return -EINVAL;
}
+ if (gpio_data->gpio == gpio)
+ return n;
+
if (!gpio) {
- free_irq(gpio_to_irq(gpio_data->gpio), led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = 0;
return n;
}
- if (gpio_data->gpio > 0 && gpio_data->gpio != gpio)
- free_irq(gpio_to_irq(gpio_data->gpio), led);
-
- gpio_data->gpio = gpio;
ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
IRQF_SHARED | IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
- if (ret)
+ if (ret) {
dev_err(dev, "request_irq failed with error %d\n", ret);
+ } else {
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ }
return ret ? ret : n;
}
device_remove_file(led->dev, &dev_attr_inverted);
device_remove_file(led->dev, &dev_attr_desired_brightness);
flush_work(&gpio_data->work);
- free_irq(gpio_to_irq(gpio_data->gpio),led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
kfree(gpio_data);
}
}
}
/* This could be BAD... when the ADB controller doesn't respond
* for this long, it's probably not coming back :-( */
- if(count >= 50) /* Hopefully shouldn't happen */
+ if (count > 50) /* Hopefully shouldn't happen */
printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
}
# Siano Mobile Silicon Digital TV device configuration
#
-config DVB_SIANO_SMS1XXX
- tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB && INPUT
+config SMS_SIANO_MDTV
+ tristate "Siano SMS1xxx based MDTV receiver"
+ depends on DVB_CORE && INPUT
---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+ Choose Y or M here if you have MDTV receiver with a Siano chipset.
- To compile this driver as a module, choose M here: the
- module will be called sms1xxx.
+ To compile this driver as a module, choose M here
+ (The module will be called smsmdtv).
-config DVB_SIANO_SMS1XXX_SMS_IDS
- bool "Enable support for Siano Mobile Silicon default USB IDs"
- depends on DVB_SIANO_SMS1XXX
- default y
- ---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset
- that uses Siano Mobile Silicon's default usb vid:pid.
+ Further documentation on this driver can be found on the WWW
+ at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
- Choose N here if you would prefer to use Siano's external driver.
+# Hardware interfaces support
- Further documentation on this driver can be found on the WWW at
- <http://www.siano-ms.com/>.
+config SMS_USB_DRV
+ tristate "USB interface support"
+ depends on DVB_CORE && USB
+ ---help---
+ Choose if you would like to have Siano's support for USB interface
+config SMS_SDIO_DRV
+ tristate "SDIO interface support"
+ depends on DVB_CORE && MMC
+ ---help---
+ Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
0 : -ETIME;
}
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+ if (client->fe_status & FE_HAS_LOCK)
+ return sms_board_led_feedback(client->coredev,
+ (client->sms_stat_dvb.ReceptionData.BER
+ == 0) ? SMS_LED_HI : SMS_LED_LO);
+ else
+ return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct smsdvb_client_t *client;
*stat = client->fe_status;
+ led_feedback(client);
+
return 0;
}
*ber = client->sms_stat_dvb.ReceptionData.BER;
+ led_feedback(client);
+
return 0;
}
(client->sms_stat_dvb.ReceptionData.InBandPwr
+ 95) * 3 / 2;
+ led_feedback(client);
+
return 0;
}
*snr = client->sms_stat_dvb.ReceptionData.SNR;
+ led_feedback(client);
+
return 0;
}
*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
+ led_feedback(client);
+
return 0;
}
u32 Data[3];
} Msg;
+ int ret;
+
client->fe_status = FE_HAS_SIGNAL;
client->event_fe_state = -1;
client->event_unc_state = -1;
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default: return -EINVAL;
}
+ /* Disable LNA, if any. An error is returned if no LNA is present */
+ ret = sms_board_lna_control(client->coredev, 0);
+ if (ret == 0) {
+ fe_status_t status;
+
+ /* tune with LNA off at first */
+ ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+
+ smsdvb_read_status(fe, &status);
+
+ if (status & FE_HAS_LOCK)
+ return ret;
+
+ /* previous tune didnt lock - enable LNA and tune again */
+ sms_board_lna_control(client->coredev, 1);
+ }
return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
&client->tune_done);
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_power(client->coredev, 1);
+
sms_board_dvb3_event(client, DVB3_EVENT_INIT);
return 0;
}
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+ sms_board_power(client->coredev, 0);
+
sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
return 0;
#define SMSSDIO_DATA 0x00
#define SMSSDIO_INT 0x04
+#define SMSSDIO_BLOCK_SIZE 128
static const struct sdio_device_id smssdio_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
sdio_claim_host(smsdev->func);
while (size >= smsdev->func->cur_blksize) {
- ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, smsdev->func->cur_blksize);
if (ret)
goto out;
}
if (size) {
- ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
- buffer, size);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, size);
}
out:
*/
isr = sdio_readb(func, SMSSDIO_INT, &ret);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Unable to read interrupt register!\n");
+ sms_err("Unable to read interrupt register!\n");
return;
}
if (smsdev->split_cb == NULL) {
cb = smscore_getbuffer(smsdev->coredev);
if (!cb) {
- dev_err(&smsdev->func->dev,
- "Unable to allocate data buffer!\n");
+ sms_err("Unable to allocate data buffer!\n");
return;
}
- ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ cb->p,
+ SMSSDIO_DATA,
+ SMSSDIO_BLOCK_SIZE);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Error %d reading initial block!\n", ret);
+ sms_err("Error %d reading initial block!\n", ret);
return;
}
return;
}
- size = hdr->msgLength - smsdev->func->cur_blksize;
+ if (hdr->msgLength > smsdev->func->cur_blksize)
+ size = hdr->msgLength - smsdev->func->cur_blksize;
+ else
+ size = 0;
} else {
cb = smsdev->split_cb;
hdr = cb->p;
smsdev->split_cb = NULL;
}
- if (hdr->msgLength > smsdev->func->cur_blksize) {
+ if (size) {
void *buffer;
- size = ALIGN(size, 128);
- buffer = cb->p + hdr->msgLength;
+ buffer = cb->p + (hdr->msgLength - size);
+ size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
- BUG_ON(smsdev->func->cur_blksize != 128);
+ BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
/*
* First attempt to transfer all of it in one go...
*/
- ret = sdio_read_blocks(smsdev->func, buffer,
- SMSSDIO_DATA, size / 128);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer,
+ SMSSDIO_DATA,
+ size);
if (ret && ret != -EINVAL) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading data from card!\n", ret);
+ sms_err("Error %d reading data from card!\n", ret);
return;
}
*/
if (ret == -EINVAL) {
while (size) {
- ret = sdio_read_blocks(smsdev->func,
- buffer, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer, SMSSDIO_DATA,
+ smsdev->func->cur_blksize);
if (ret) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading "
+ sms_err("Error %d reading "
"data from card!\n", ret);
return;
}
if (ret)
goto release;
- ret = sdio_set_block_size(func, 128);
+ ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
if (ret)
goto disable;
EM28XX_I2C_FREQ_100_KHZ;
}
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
+
/* FIXME: Should be replaced by a proper mt9m001 driver */
static int em28xx_initialize_mt9m001(struct em28xx *dev)
{
/* HINT method: webcam I2C chips
*
- * This method work for webcams with Micron sensors
+ * This method works for webcams with Micron sensors
*/
static int em28xx_hint_sensor(struct em28xx *dev)
{
dev->vinctl = 0x00;
break;
+
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m111";
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ em28xx_initialize_mt9m111(dev);
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
em28xx_set_model(dev);
break;
default:
- printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
+ printk("Unknown Micron Sensor 0x%04x\n", version);
return -EINVAL;
}
}
em28xx_tuner_setup(dev);
- em28xx_ir_init(dev);
+
+ if(!disable_ir)
+ em28xx_ir_init(dev);
}
EM28XX_NOSENSOR = 0,
EM28XX_MT9V011,
EM28XX_MT9M001,
+ EM28XX_MT9M111,
};
enum em28xx_adecoder {
config USB_GSPCA_SN9C20X_EVDEV
bool "Enable evdev support"
- depends on USB_GSPCA_SN9C20X
+ depends on USB_GSPCA_SN9C20X && INPUT
---help---
Say Y here in order to enable evdev support for sn9c20x webcam button.
for (i = 0; i < 2; i++) {
err =
send_control_msg(udev, 1, init[cam->method][i].value,
- 0, init[i][cam->method].bytes,
+ 0, init[cam->method][i].bytes,
init[cam->method][i].size);
if (err < 0) {
dev_err(&udev->dev, "error during release sequence\n");
buf64 = (uint64_t *)buf;
while (i < len/8) {
uint64_t x;
- asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+ asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
i *= 8;
tristate "Micrel KSZ8842"
depends on HAS_IOMEM
help
- This platform driver is for Micrel KSZ8842 chip.
+ This platform driver is for Micrel KSZ8842 / KS8842
+ 2-port ethernet switch chip (managed, VLAN, QoS).
config KS8851
tristate "Micrel KS8851 SPI"
depends on SPI
select MII
+ select CRC32
help
SPI driver for Micrel KS8851 SPI attached network chip.
.probe = w90p910_ether_probe,
.remove = __devexit_p(w90p910_ether_remove),
.driver = {
- .name = "w90p910-emc",
+ .name = "nuc900-emc",
.owner = THIS_MODULE,
},
};
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 MAC driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-emc");
+MODULE_ALIAS("platform:nuc900-emc");
nic->ru_running = RU_SUSPENDED;
pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_FROMDEVICE);
return -ENODATA;
}
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
struct bcom_fec_bd *bd;
+ unsigned long flags;
if (bcom_queue_full(priv->tx_dmatsk)) {
if (net_ratelimit())
return NETDEV_TX_BUSY;
}
- spin_lock_irq(&priv->lock);
+ spin_lock_irqsave(&priv->lock, flags);
dev->trans_start = jiffies;
bd = (struct bcom_fec_bd *)
netif_stop_queue(dev);
}
- spin_unlock_irq(&priv->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
return NETDEV_TX_OK;
}
free_irq(dev->emac_irq, dev);
+ netif_carrier_off(ndev);
+
return 0;
}
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
.ndo_start_xmit = au1k_irda_hard_xmit,
.ndo_tx_timeout = au1k_tx_timeout,
.ndo_do_ioctl = au1k_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int au1k_irda_net_init(struct net_device *dev)
.ndo_stop = pxa_irda_stop,
.ndo_start_xmit = pxa_irda_hard_xmit,
.ndo_do_ioctl = pxa_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int pxa_irda_probe(struct platform_device *pdev)
if (!dev)
goto err_mem_3;
+ SET_NETDEV_DEV(dev, &pdev->dev);
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
.ndo_stop = sa1100_irda_stop,
.ndo_start_xmit = sa1100_irda_hard_xmit,
.ndo_do_ioctl = sa1100_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int sa1100_irda_probe(struct platform_device *pdev)
struct ixpdev_priv *ip = netdev_priv(dev);
struct ixpdev_tx_desc *desc;
int entry;
+ unsigned long flags;
if (unlikely(skb->len > PAGE_SIZE)) {
/* @@@ Count drops. */
dev->trans_start = jiffies;
- local_irq_disable();
+ local_irq_save(flags);
ip->tx_queue_entries++;
if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
netif_stop_queue(dev);
- local_irq_enable();
+ local_irq_restore(flags);
return 0;
}
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
+ unsigned long flags;
#ifdef DEBUG
int i;
#endif
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev->trans_start = jiffies;
{
struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+ unsigned long flags;
/* If we don't have a pending timer, set one up to catch our recent
post in case the interface becomes idle */
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock_irq(&ring->comp_lock)) {
+ if (spin_trylock_irqsave(&ring->comp_lock, flags)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock_irq(&ring->comp_lock);
+ spin_unlock_irqrestore(&ring->comp_lock, flags);
}
}
/* this enables an interrupt in the interrupt mask register */
#define SMC_ENABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_enable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_enable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask |= (x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
} while (0)
/* this disables an interrupt from the interrupt mask register */
#define SMC_DISABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_disable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_disable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask &= ~(x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
} while (0)
/*
* any other concurrent access and C would always interrupt B. But life
* isn't that easy in a SMP world...
*/
-#define smc_special_trylock(lock) \
+#define smc_special_trylock(lock, flags) \
({ \
int __ret; \
- local_irq_disable(); \
+ local_irq_save(flags); \
__ret = spin_trylock(lock); \
if (!__ret) \
- local_irq_enable(); \
+ local_irq_restore(flags); \
__ret; \
})
-#define smc_special_lock(lock) spin_lock_irq(lock)
-#define smc_special_unlock(lock) spin_unlock_irq(lock)
+#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags)
+#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
#else
-#define smc_special_trylock(lock) (1)
-#define smc_special_lock(lock) do { } while (0)
-#define smc_special_unlock(lock) do { } while (0)
+#define smc_special_trylock(lock, flags) (1)
+#define smc_special_lock(lock, flags) do { } while (0)
+#define smc_special_unlock(lock, flags) do { } while (0)
#endif
/*
struct sk_buff *skb;
unsigned int packet_no, len;
unsigned char *buf;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
- if (!smc_special_trylock(&lp->lock)) {
+ if (!smc_special_trylock(&lp->lock, flags)) {
netif_stop_queue(dev);
tasklet_schedule(&lp->tx_task);
return;
skb = lp->pending_tx_skb;
if (unlikely(!skb)) {
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
return;
}
lp->pending_tx_skb = NULL;
printk("%s: Memory allocation failed.\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
goto done;
}
/* queue the packet for TX */
SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
dev->trans_start = jiffies;
dev->stats.tx_packets++;
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
unsigned int numPages, poll_count, status;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
return 0;
}
- smc_special_lock(&lp->lock);
+ smc_special_lock(&lp->lock, flags);
/* now, try to allocate the memory */
SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
}
} while (--poll_count);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
lp->pending_tx_skb = skb;
if (!poll_count) {
struct sk_buff_head recv;
struct sk_buff_head send;
+ /* Work struct for refilling if we run low on memory. */
+ struct delayed_work refill;
+
/* Chain pages by the private ptr. */
struct page *pages;
};
dev_kfree_skb(skb);
}
-static void try_fill_recv_maxbufs(struct virtnet_info *vi)
+static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[2+MAX_SKB_FRAGS];
int num, err, i;
+ bool oom = false;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
for (;;) {
struct virtio_net_hdr *hdr;
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, MAX_PACKET_LEN);
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
skb_frag_t *f = &skb_shinfo(skb)->frags[i];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page)
break;
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
-static void try_fill_recv(struct virtnet_info *vi)
+/* Returns false if we couldn't fill entirely (OOM). */
+static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[1];
int err;
+ bool oom = false;
- if (!vi->mergeable_rx_bufs) {
- try_fill_recv_maxbufs(vi);
- return;
- }
+ if (!vi->mergeable_rx_bufs)
+ return try_fill_recv_maxbufs(vi, gfp);
for (;;) {
skb_frag_t *f;
skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
f = &skb_shinfo(skb)->frags[0];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page) {
+ oom = true;
kfree_skb(skb);
break;
}
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
static void skb_recv_done(struct virtqueue *rvq)
}
}
+static void refill_work(struct work_struct *work)
+{
+ struct virtnet_info *vi;
+ bool still_empty;
+
+ vi = container_of(work, struct virtnet_info, refill.work);
+ napi_disable(&vi->napi);
+ try_fill_recv(vi, GFP_KERNEL);
+ still_empty = (vi->num == 0);
+ napi_enable(&vi->napi);
+
+ /* In theory, this can happen: if we don't get any buffers in
+ * we will *never* try to fill again. */
+ if (still_empty)
+ schedule_delayed_work(&vi->refill, HZ/2);
+}
+
static int virtnet_poll(struct napi_struct *napi, int budget)
{
struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
received++;
}
- /* FIXME: If we oom and completely run out of inbufs, we need
- * to start a timer trying to fill more. */
- if (vi->num < vi->max / 2)
- try_fill_recv(vi);
+ if (vi->num < vi->max / 2) {
+ if (!try_fill_recv(vi, GFP_ATOMIC))
+ schedule_delayed_work(&vi->refill, 0);
+ }
/* Out of packets? */
if (received < budget) {
vi->vdev = vdev;
vdev->priv = vi;
vi->pages = NULL;
+ INIT_DELAYED_WORK(&vi->refill, refill_work);
/* If they give us a callback when all buffers are done, we don't need
* the timer. */
}
/* Last of all, set up some receive buffers. */
- try_fill_recv(vi);
+ try_fill_recv(vi, GFP_KERNEL);
/* If we didn't even get one input buffer, we're useless. */
if (vi->num == 0) {
unregister:
unregister_netdev(dev);
+ cancel_delayed_work_sync(&vi->refill);
free_vqs:
vdev->config->del_vqs(vdev);
free:
BUG_ON(vi->num != 0);
unregister_netdev(vi->dev);
+ cancel_delayed_work_sync(&vi->refill);
vdev->config->del_vqs(vi->vdev);
int err = 0;
u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
- if ((key < 0) || (key > 4))
+ if ((key < 0) || (key >= 4))
return -EINVAL;
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
+ /* ENEDCA flag must always be set, transmit issues? */
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
return 0;
}
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
info->bssid[i]);
+ if (priv->is_rtl8187b)
+ reg = RTL818X_MSR_ENEDCA;
+ else
+ reg = 0;
+
if (is_valid_ether_addr(info->bssid)) {
- reg = RTL818X_MSR_INFRA;
- if (priv->is_rtl8187b)
- reg |= RTL818X_MSR_ENEDCA;
+ reg |= RTL818X_MSR_INFRA;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
} else {
- reg = RTL818X_MSR_NO_LINK;
+ reg |= RTL818X_MSR_NO_LINK;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
static int yellowfin_open(struct net_device *dev);
static void yellowfin_timer(unsigned long data);
static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
static int yellowfin_rx(struct net_device *dev);
{
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- int i;
+ int i, ret;
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
- if (i) return i;
+ ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+ if (ret)
+ return ret;
if (yellowfin_debug > 1)
printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
dev->name, dev->irq);
- yellowfin_init_ring(dev);
+ ret = yellowfin_init_ring(dev);
+ if (ret) {
+ free_irq(dev->irq, dev);
+ return ret;
+ }
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
- int i;
+ int i, j;
yp->tx_full = 0;
yp->cur_rx = yp->cur_tx = 0;
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
}
+ if (i != RX_RING_SIZE) {
+ for (j = 0; j < i; j++)
+ dev_kfree_skb(yp->rx_skbuff[j]);
+ return -ENOMEM;
+ }
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
#else
{
- int j;
-
/* Tx ring needs a pair of descriptors, the second for the status. */
for (i = 0; i < TX_RING_SIZE; i++) {
j = 2*i;
}
#endif
yp->tx_tail_desc = &yp->tx_status[0];
- return;
+ return 0;
}
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
return error;
}
- return pci_dev->state_saved ? pci_restore_state(pci_dev) : 0;
+ return pci_restore_state(pci_dev);
}
static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
int i;
u32 val;
+ if (!dev->state_saved)
+ return 0;
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
if (hci_result != HCI_SUCCESS) {
/* Can't do anything useful */
mutex_unlock(&dev->mutex);
+ return;
}
new_rfk_state = value;
acpi_status status;
struct acpi_object_list input;
union acpi_object params[3];
- char method[4] = "WM";
+ char method[5] = "WM";
if (!find_guid(guid_string, &wblock))
return AE_ERROR;
acpi_status status, wc_status = AE_ERROR;
struct acpi_object_list input, wc_input;
union acpi_object wc_params[1], wq_params[1];
- char method[4];
- char wc_method[4] = "WC";
+ char method[5];
+ char wc_method[5] = "WC";
if (!guid_string || !out)
return AE_BAD_PARAMETER;
acpi_handle handle;
struct acpi_object_list input;
union acpi_object params[2];
- char method[4] = "WS";
+ char method[5] = "WS";
if (!guid_string || !in)
return AE_BAD_DATA;
}
pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL,
"pps%d", pps->id);
- if (err)
+ if (IS_ERR(pps->dev))
goto del_cdev;
dev_set_drvdata(pps->dev, pps);
struct dasd_device *base;
block = bdev->bd_disk->private_data;
- base = block->base;
if (!block)
return -ENODEV;
+ base = block->base;
if (!base->discipline ||
!base->discipline->fill_geometry)
cdev = io_subchannel_allocate_dev(sch);
if (!IS_ERR(cdev)) {
ret = io_subchannel_initialize_dev(sch, cdev);
- if (ret) {
- kfree(cdev);
+ if (ret)
cdev = ERR_PTR(ret);
- }
}
return cdev;
}
}
if (temp_index != 0 && fan_index != 0) {
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
- if (IS_ERR(kenvctrld_task))
- return PTR_ERR(kenvctrld_task);
+ if (IS_ERR(kenvctrld_task)) {
+ int err = PTR_ERR(kenvctrld_task);
+
+ kenvctrld_task = NULL;
+ return err;
+ }
}
return 0;
struct bbc_cpu_temperature *tp, *tpos;
struct bbc_fan_control *fp, *fpos;
- kthread_stop(kenvctrld_task);
+ if (kenvctrld_task)
+ kthread_stop(kenvctrld_task);
list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
list_del(&tp->bp_list);
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}
+/**
+ * mpt2sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ if (ioc->fault_reset_work_q)
+ return;
+
+ /* initialize fault polling */
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+ snprintf(ioc->fault_reset_work_q_name,
+ sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ ioc->fault_reset_work_q =
+ create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+ if (!ioc->fault_reset_work_q) {
+ printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ wq = ioc->fault_reset_work_q;
+ ioc->fault_reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work(&ioc->fault_reset_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
return;
+ /* each nexus loss loginfo */
+ if (log_info == 0x31170000)
+ return;
+
/* eat the loginfos associated with task aborts */
if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
}
}
- pci_set_drvdata(pdev, ioc->shost);
_base_mask_interrupts(ioc);
r = _base_enable_msix(ioc);
if (r)
ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return r;
}
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return;
}
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
int r, i;
- unsigned long flags;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
if (r)
return r;
+ pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (r)
goto out_free_resources;
if (r)
goto out_free_resources;
- /* initialize fault polling */
- INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
- snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
- ioc->fault_reset_work_q =
- create_singlethread_workqueue(ioc->fault_reset_work_q_name);
- if (!ioc->fault_reset_work_q) {
- printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
- ioc->name, __func__, __LINE__);
- goto out_free_resources;
- }
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->fault_reset_work_q)
- queue_delayed_work(ioc->fault_reset_work_q,
- &ioc->fault_reset_work,
- msecs_to_jiffies(FAULT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
ioc->remove_host = 1;
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->config_cmds.reply);
void
mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
{
- unsigned long flags;
- struct workqueue_struct *wq;
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- wq = ioc->fault_reset_work_q;
- ioc->fault_reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
- if (!cancel_delayed_work(&ioc->fault_reset_work))
- flush_workqueue(wq);
- destroy_workqueue(wq);
-
+ mpt2sas_base_stop_watchdog(ioc);
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->base_cmds.reply);
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "01.100.03.00"
+#define MPT2SAS_DRIVER_VERSION "01.100.04.00"
#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 03
+#define MPT2SAS_BUILD_VERSION 04
#define MPT2SAS_RELEASE_VERSION 00
/*
/* base shared API */
extern struct list_head mpt2sas_ioc_list;
+void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count;
- u8 issue_reset;
+ u8 issue_host_reset = 0;
u16 wait_state_count;
+ mutex_lock(&ioc->config_cmds.mutex);
if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
ioc->name, __func__);
+ mutex_unlock(&ioc->config_cmds.mutex);
return -EAGAIN;
}
retry_count = 0;
retry_config:
+ if (retry_count) {
+ if (retry_count > 2) /* attempt only 2 retries */
+ return -EFAULT;
+ printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
+ ioc->name, __func__, retry_count);
+ }
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EFAULT;
+ r = -EFAULT;
+ goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EAGAIN;
+ r = -EAGAIN;
+ goto out;
}
r = 0;
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2ConfigRequest_t)/4);
- if (!(ioc->config_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ retry_count++;
+ if (ioc->config_cmds.smid == smid)
+ mpt2sas_base_free_smid(ioc, smid);
+ if ((ioc->shost_recovery) ||
+ (ioc->config_cmds.status & MPT2_CMD_RESET))
+ goto retry_config;
+ issue_host_reset = 1;
+ r = -EFAULT;
+ goto out;
}
if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
memcpy(mpi_reply, ioc->config_cmds.reply,
if (retry_count)
printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n",
ioc->name, __func__);
+out:
ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return r;
-
- issue_host_reset:
- if (issue_reset)
+ mutex_unlock(&ioc->config_cmds.mutex);
+ if (issue_host_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- if (!retry_count) {
- printk(MPT2SAS_INFO_FMT "%s: attempting retry\n",
- ioc->name, __func__);
- retry_count++;
- goto retry_config;
- }
- return -EFAULT;
+ return r;
}
/**
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage2_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage3_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOCPage8_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t config_page;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigRequest_t mpi_request;
int r;
struct config_request mem;
-
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
*num_pds = 0;
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sz);
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
char *desc_ioc_state = NULL;
char *desc_scsi_status = NULL;
char *desc_scsi_state = ioc->tmp_string;
+ u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+
+ if (log_info == 0x31170000)
+ return;
switch (ioc_status) {
case MPI2_IOCSTATUS_SUCCESS:
__le64 sas_address;
int i;
unsigned long flags;
- struct _sas_port *mpt2sas_port;
+ struct _sas_port *mpt2sas_port = NULL;
int rc = 0;
if (!handle)
&expander_pg1, i, handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
- continue;
+ rc = -1;
+ goto out_fail;
}
sas_expander->phy[i].handle = handle;
sas_expander->phy[i].phy_id = i;
- mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
- expander_pg1, sas_expander->parent_dev);
+
+ if ((mpt2sas_transport_add_expander_phy(ioc,
+ &sas_expander->phy[i], expander_pg1,
+ sas_expander->parent_dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -1;
+ goto out_fail;
+ }
}
if (sas_expander->enclosure_handle) {
out_fail:
- if (sas_expander)
- kfree(sas_expander->phy);
+ if (mpt2sas_port)
+ mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+ sas_expander->parent_handle);
kfree(sas_expander);
return rc;
}
sas_device->hidden_raid_component = is_pd;
/* get enclosure_logical_id */
- if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
- MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_device->enclosure_handle))) {
+ if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
+ ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_device->enclosure_handle)))
sas_device->enclosure_logical_id =
le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
- }
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
u16 handle = le16_to_cpu(element->VolDevHandle);
int rc;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
if (!wwid) {
printk(MPT2SAS_ERR_FMT
unsigned long flags;
struct MPT2SAS_TARGET *sas_target_priv_data;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
struct _sas_device *sas_device;
unsigned long flags;
u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
{
Mpi2EventIrConfigElement_t *element;
int i;
+ u8 foreign_config;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
+ foreign_config = (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
switch (element->ReasonCode) {
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
case MPI2_EVENT_IR_CHANGE_RC_ADDED:
- _scsih_sas_volume_add(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_add(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
- _scsih_sas_volume_delete(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_delete(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
_scsih_sas_pd_hide(ioc, element);
u32 state;
struct _sas_device *sas_device;
unsigned long flags;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
switch (state) {
-#if 0
- case MPI2_RAID_PD_STATE_OFFLINE:
- if (sas_device)
- _scsih_remove_device(ioc, handle);
- break;
-#endif
case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED:
case MPI2_RAID_PD_STATE_REBUILDING:
case MPI2_RAID_PD_STATE_OPTIMAL:
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
+
break;
+ case MPI2_RAID_PD_STATE_OFFLINE:
case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
case MPI2_RAID_PD_STATE_HOT_SPARE:
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
u32 device_state;
+ mpt2sas_base_stop_watchdog(ioc);
flush_scheduled_work();
scsi_block_requests(shost);
device_state = pci_choose_state(pdev, state);
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
scsi_unblock_requests(shost);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
}
#endif /* CONFIG_PM */
static void ks8695uart_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
- disable_irq(KS8695_IRQ_UART_TX);
+ /* use disable_irq_nosync() and not disable_irq() to avoid self
+ * imposed deadlock by not waiting for irq handler to end,
+ * since this ks8695uart_stop_tx() is called from interrupt context.
+ */
+ disable_irq_nosync(KS8695_IRQ_UART_TX);
tx_enable(port, 0);
}
}
mutex_lock(&tz->lock);
- tz->ops->get_temp(tz, &temp);
+ if (tz->ops->get_temp(tz, &temp)) {
+ /* get_temp failed - retry it later */
+ printk(KERN_WARNING PREFIX "failed to read out thermal zone "
+ "%d\n", tz->id);
+ goto leave;
+ }
for (count = 0; count < tz->trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
THERMAL_TRIPS_NONE);
tz->last_temperature = temp;
+
+ leave:
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
xenfb_init_shared_page(info, fb_info);
+ ret = xenfb_connect_backend(dev, info);
+ if (ret < 0)
+ goto error;
+
ret = register_framebuffer(fb_info);
if (ret) {
fb_deferred_io_cleanup(fb_info);
}
info->fb_info = fb_info;
- ret = xenfb_connect_backend(dev, info);
- if (ret < 0)
- goto error;
-
xenfb_make_preferred_console();
return 0;
#include <linux/uaccess.h>
#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
+#include <asm/mach-ar7/ar7.h>
#define DRVNAME "ar7_wdt"
#define LONGNAME "TI AR7 Watchdog Timer"
* Return 0 upon success, -ERRNO upon failure.
*/
-static int v9fs_parse_options(struct v9fs_session_info *v9ses)
+static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
{
char *options;
substring_t args[MAX_OPT_ARGS];
v9ses->debug = 0;
v9ses->cache = 0;
- if (!v9ses->options)
+ if (!opts)
return 0;
- options = kstrdup(v9ses->options, GFP_KERNEL);
+ options = kstrdup(opts, GFP_KERNEL);
if (!options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
v9ses->uid = ~0;
v9ses->dfltuid = V9FS_DEFUID;
v9ses->dfltgid = V9FS_DEFGID;
- if (data) {
- v9ses->options = kstrdup(data, GFP_KERNEL);
- if (!v9ses->options) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option string\n");
- retval = -ENOMEM;
- goto error;
- }
- }
- rc = v9fs_parse_options(v9ses);
+ rc = v9fs_parse_options(v9ses, data);
if (rc < 0) {
retval = rc;
goto error;
}
- v9ses->clnt = p9_client_create(dev_name, v9ses->options);
-
+ v9ses->clnt = p9_client_create(dev_name, data);
if (IS_ERR(v9ses->clnt)) {
retval = PTR_ERR(v9ses->clnt);
v9ses->clnt = NULL;
__putname(v9ses->uname);
__putname(v9ses->aname);
- kfree(v9ses->options);
}
/**
unsigned int afid;
unsigned int cache;
- char *options; /* copy of mount options */
char *uname; /* user name to mount as */
char *aname; /* name of remote hierarchy being mounted */
unsigned int maxdata; /* max data for client interface */
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
- * @v9ses: 9P session info (for determining extended mode)
* @wstat: structure to initialize
*
*/
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
+ int err;
struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
P9_DPRINTK(P9_DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
inode = new_inode(sb);
- if (inode) {
- inode->i_mode = mode;
- inode->i_uid = current_fsuid();
- inode->i_gid = current_fsgid();
- inode->i_blocks = 0;
- inode->i_rdev = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_mapping->a_ops = &v9fs_addr_operations;
-
- switch (mode & S_IFMT) {
- case S_IFIFO:
- case S_IFBLK:
- case S_IFCHR:
- case S_IFSOCK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "special files without extended mode\n");
- return ERR_PTR(-EINVAL);
- }
- init_special_inode(inode, inode->i_mode,
- inode->i_rdev);
- break;
- case S_IFREG:
- inode->i_op = &v9fs_file_inode_operations;
- inode->i_fop = &v9fs_file_operations;
- break;
- case S_IFLNK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "extended modes used w/o 9P2000.u\n");
- return ERR_PTR(-EINVAL);
- }
- inode->i_op = &v9fs_symlink_inode_operations;
- break;
- case S_IFDIR:
- inc_nlink(inode);
- if (v9fs_extended(v9ses))
- inode->i_op = &v9fs_dir_inode_operations_ext;
- else
- inode->i_op = &v9fs_dir_inode_operations;
- inode->i_fop = &v9fs_dir_operations;
- break;
- default:
- P9_DPRINTK(P9_DEBUG_ERROR,
- "BAD mode 0x%x S_IFMT 0x%x\n",
- mode, mode & S_IFMT);
- return ERR_PTR(-EINVAL);
- }
- } else {
+ if (!inode) {
P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n");
return ERR_PTR(-ENOMEM);
}
+
+ inode->i_mode = mode;
+ inode->i_uid = current_fsuid();
+ inode->i_gid = current_fsgid();
+ inode->i_blocks = 0;
+ inode->i_rdev = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ inode->i_mapping->a_ops = &v9fs_addr_operations;
+
+ switch (mode & S_IFMT) {
+ case S_IFIFO:
+ case S_IFBLK:
+ case S_IFCHR:
+ case S_IFSOCK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "special files without extended mode\n");
+ err = -EINVAL;
+ goto error;
+ }
+ init_special_inode(inode, inode->i_mode, inode->i_rdev);
+ break;
+ case S_IFREG:
+ inode->i_op = &v9fs_file_inode_operations;
+ inode->i_fop = &v9fs_file_operations;
+ break;
+ case S_IFLNK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "extended modes used w/o 9P2000.u\n");
+ err = -EINVAL;
+ goto error;
+ }
+ inode->i_op = &v9fs_symlink_inode_operations;
+ break;
+ case S_IFDIR:
+ inc_nlink(inode);
+ if (v9fs_extended(v9ses))
+ inode->i_op = &v9fs_dir_inode_operations_ext;
+ else
+ inode->i_op = &v9fs_dir_inode_operations;
+ inode->i_fop = &v9fs_dir_operations;
+ break;
+ default:
+ P9_DPRINTK(P9_DEBUG_ERROR, "BAD mode 0x%x S_IFMT 0x%x\n",
+ mode, mode & S_IFMT);
+ err = -EINVAL;
+ goto error;
+ }
+
return inode;
+
+error:
+ iput(inode);
+ return ERR_PTR(err);
}
/*
ret = NULL;
st = p9_client_stat(fid);
- if (IS_ERR(st)) {
- err = PTR_ERR(st);
- st = NULL;
- goto error;
- }
+ if (IS_ERR(st))
+ return ERR_CAST(st);
umode = p9mode2unixmode(v9ses, st->mode);
ret = v9fs_get_inode(sb, umode);
if (IS_ERR(ret)) {
err = PTR_ERR(ret);
- ret = NULL;
goto error;
}
v9fs_stat2inode(st, ret, sb);
ret->i_ino = v9fs_qid2ino(&st->qid);
+ p9stat_free(st);
kfree(st);
return ret;
error:
+ p9stat_free(st);
kfree(st);
- if (ret)
- iput(ret);
-
return ERR_PTR(err);
}
* @v9ses: session information
* @dir: directory that dentry is being created in
* @dentry: dentry that is being created
+ * @extension: 9p2000.u extension string to support devices, etc.
* @perm: create permissions
* @mode: open mode
- * @extension: 9p2000.u extension string to support devices, etc.
*
*/
static struct p9_fid *
dentry->d_op = &v9fs_dentry_operations;
d_instantiate(dentry, inode);
- v9fs_fid_add(dentry, fid);
+ err = v9fs_fid_add(dentry, fid);
+ if (err < 0)
+ goto error;
+
return ofid;
error:
static void
v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
- int flags)
+ int flags, void *data)
{
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
MS_NOATIME;
+
+ save_mount_options(sb, data);
}
/**
struct v9fs_session_info *v9ses = NULL;
struct p9_wstat *st = NULL;
int mode = S_IRWXUGO | S_ISVTX;
- uid_t uid = current_fsuid();
- gid_t gid = current_fsgid();
struct p9_fid *fid;
int retval = 0;
P9_DPRINTK(P9_DEBUG_VFS, " \n");
- st = NULL;
v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL);
if (!v9ses)
return -ENOMEM;
retval = PTR_ERR(sb);
goto free_stat;
}
- v9fs_fill_super(sb, v9ses, flags);
+ v9fs_fill_super(sb, v9ses, flags, data);
inode = v9fs_get_inode(sb, S_IFDIR | mode);
if (IS_ERR(inode)) {
goto release_sb;
}
- inode->i_uid = uid;
- inode->i_gid = gid;
-
root = d_alloc_root(inode);
if (!root) {
iput(inode);
simple_set_mnt(mnt, sb);
return 0;
-release_sb:
- deactivate_locked_super(sb);
-
free_stat:
+ p9stat_free(st);
kfree(st);
clunk_fid:
close_session:
v9fs_session_close(v9ses);
kfree(v9ses);
+ return retval;
+release_sb:
+ p9stat_free(st);
+ kfree(st);
+ deactivate_locked_super(sb);
return retval;
}
v9fs_session_close(v9ses);
kfree(v9ses);
+ s->s_fs_info = NULL;
P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n");
}
-/**
- * v9fs_show_options - Show mount options in /proc/mounts
- * @m: seq_file to write to
- * @mnt: mount descriptor
- *
- */
-
-static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
-{
- struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info;
-
- seq_printf(m, "%s", v9ses->options);
- return 0;
-}
-
static void
v9fs_umount_begin(struct super_block *sb)
{
static const struct super_operations v9fs_super_ops = {
.statfs = simple_statfs,
.clear_inode = v9fs_clear_inode,
- .show_options = v9fs_show_options,
+ .show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
inode = page->mapping->host;
- ASSERT(file != NULL);
- key = file->private_data;
- ASSERT(key != NULL);
+ if (file) {
+ key = file->private_data;
+ ASSERT(key != NULL);
+ } else {
+ key = afs_request_key(AFS_FS_S(inode->i_sb)->volume->cell);
+ if (IS_ERR(key)) {
+ ret = PTR_ERR(key);
+ goto error_nokey;
+ }
+ }
_enter("{%x},{%lu},{%lu}", key_serial(key), inode->i_ino, page->index);
unlock_page(page);
}
+ if (!file)
+ key_put(key);
_leave(" = 0");
return 0;
error:
SetPageError(page);
unlock_page(page);
+ if (!file)
+ key_put(key);
+error_nokey:
_leave(" = %d", ret);
return ret;
}
}
/* Update the expiry counter if fs is busy */
- if (!may_umount_tree(mnt)) {
+ if (!may_umount_tree(path.mnt)) {
struct autofs_info *ino = autofs4_dentry_ino(top);
ino->last_used = jiffies;
goto done;
}
EXPORT_SYMBOL(open_exec);
-int kernel_read(struct file *file, unsigned long offset,
- char *addr, unsigned long count)
+int kernel_read(struct file *file, loff_t offset,
+ char *addr, unsigned long count)
{
mm_segment_t old_fs;
loff_t pos = offset;
module will be called ext3.
config EXT3_DEFAULTS_TO_ORDERED
- bool "Default to 'data=ordered' in ext3 (legacy option)"
+ bool "Default to 'data=ordered' in ext3"
depends on EXT3_FS
help
- If a filesystem does not explicitly specify a data ordering
- mode, and the journal capability allowed it, ext3 used to
- historically default to 'data=ordered'.
-
- That was a rather unfortunate choice, because it leads to all
- kinds of latency problems, and the 'data=writeback' mode is more
- appropriate these days.
-
- You should probably always answer 'n' here, and if you really
- want to use 'data=ordered' mode, set it in the filesystem itself
- with 'tune2fs -o journal_data_ordered'.
-
- But if you really want to enable the legacy default, you can do
- so by answering 'y' to this question.
+ The journal mode options for ext3 have different tradeoffs
+ between when data is guaranteed to be on disk and
+ performance. The use of "data=writeback" can cause
+ unwritten data to appear in files after an system crash or
+ power failure, which can be a security issue. However,
+ "data=ordered" mode can also result in major performance
+ problems, including seconds-long delays before an fsync()
+ call returns. For details, see:
+
+ http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
+
+ If you have been historically happy with ext3's performance,
+ data=ordered mode will be a safe choice and you should
+ answer 'y' here. If you understand the reliability and data
+ privacy issues of data=writeback and are willing to make
+ that trade off, answer 'n'.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
#endif
}
+static char *data_mode_string(unsigned long mode)
+{
+ switch (mode) {
+ case EXT3_MOUNT_JOURNAL_DATA:
+ return "journal";
+ case EXT3_MOUNT_ORDERED_DATA:
+ return "ordered";
+ case EXT3_MOUNT_WRITEBACK_DATA:
+ return "writeback";
+ }
+ return "unknown";
+}
+
/*
* Show an option if
* - it's set to a non-default value OR
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
+ seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS));
if (test_opt(sb, DATA_ERR_ABORT))
seq_puts(seq, ",data_err=abort");
datacheck:
if (is_remount) {
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
- != data_opt) {
- printk(KERN_ERR
- "EXT3-fs: cannot change data "
- "mode on remount\n");
- return 0;
- }
+ == data_opt)
+ break;
+ printk(KERN_ERR
+ "EXT3-fs (device %s): Cannot change "
+ "data mode on remount. The filesystem "
+ "is mounted in data=%s mode and you "
+ "try to remount it in data=%s mode.\n",
+ sb->s_id,
+ data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS),
+ data_mode_string(data_opt));
+ return 0;
} else {
sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
sbi->s_mount_opt |= data_opt;
return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
+struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
+ struct user_struct **user)
{
int error = -ENOMEM;
- int unlock_shm = 0;
struct file *file;
struct inode *inode;
struct dentry *dentry, *root;
struct qstr quick_string;
- struct user_struct *user = current_user();
+ *user = NULL;
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
if (!can_do_hugetlb_shm()) {
- if (user_shm_lock(size, user)) {
- unlock_shm = 1;
+ *user = current_user();
+ if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
"Using mlock ulimits for SHM_HUGETLB deprecated\n");
- } else
+ } else {
+ *user = NULL;
return ERR_PTR(-EPERM);
+ }
}
root = hugetlbfs_vfsmount->mnt_root;
out_dentry:
dput(dentry);
out_shm_unlock:
- if (unlock_shm)
- user_shm_unlock(size, user);
+ if (*user) {
+ user_shm_unlock(size, *user);
+ *user = NULL;
+ }
return ERR_PTR(error);
}
continue;
}
/* Initialize or reset the session */
- if (nfs4_has_session(clp) &&
- test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+ if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)
+ && nfs4_has_session(clp)) {
if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
status = nfs4_initialize_session(clp);
else
return send;
}
+/*
+ * This is NEVER supposed to be called. Inotify marks should either have been
+ * removed from the idr when the watch was removed or in the
+ * fsnotify_destroy_mark_by_group() call when the inotify instance was being
+ * torn down. This is only called if the idr is about to be freed but there
+ * are still marks in it.
+ */
static int idr_callback(int id, void *p, void *data)
{
- BUG();
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *ientry;
+ static bool warned = false;
+
+ if (warned)
+ return 0;
+
+ warned = false;
+ entry = p;
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+ WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+ "idr. Probably leaking memory\n", id, p, data);
+
+ /*
+ * I'm taking the liberty of assuming that the mark in question is a
+ * valid address and I'm dereferencing it. This might help to figure
+ * out why we got here and the panic is no worse than the original
+ * BUG() that was here.
+ */
+ if (entry)
+ printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
+ entry->group, entry->inode, ientry->wd);
return 0;
}
static void inotify_free_group_priv(struct fsnotify_group *group)
{
/* ideally the idr is empty and we won't hit the BUG in teh callback */
- idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+ idr_for_each(&group->inotify_data.idr, idr_callback, group);
idr_remove_all(&group->inotify_data.idr);
idr_destroy(&group->inotify_data.idr);
}
static struct vfsmount *inotify_mnt __read_mostly;
-/* this just sits here and wastes global memory. used to just pad userspace messages with zeros */
-static struct inotify_event nul_inotify_event;
-
/* these are configurable via /proc/sys/fs/inotify/ */
static int inotify_max_user_instances __read_mostly;
static int inotify_max_queued_events __read_mostly;
event = fsnotify_peek_notify_event(group);
- event_size += roundup(event->name_len, event_size);
+ if (event->name_len)
+ event_size += roundup(event->name_len + 1, event_size);
if (event_size > count)
return ERR_PTR(-EINVAL);
struct fsnotify_event_private_data *fsn_priv;
struct inotify_event_private_data *priv;
size_t event_size = sizeof(struct inotify_event);
- size_t name_len;
+ size_t name_len = 0;
/* we get the inotify watch descriptor from the event private data */
spin_lock(&event->lock);
inotify_free_event_priv(fsn_priv);
}
- /* round up event->name_len so it is a multiple of event_size */
- name_len = roundup(event->name_len, event_size);
+ /*
+ * round up event->name_len so it is a multiple of event_size
+ * plus an extra byte for the terminating '\0'.
+ */
+ if (event->name_len)
+ name_len = roundup(event->name_len + 1, event_size);
inotify_event.len = name_len;
inotify_event.mask = inotify_mask_to_arg(event->mask);
return -EFAULT;
buf += event->name_len;
- /* fill userspace with 0's from nul_inotify_event */
- if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+ /* fill userspace with 0's */
+ if (clear_user(buf, len_to_zero))
return -EFAULT;
buf += len_to_zero;
event_size += name_len;
list_for_each_entry(holder, &group->notification_list, event_list) {
event = holder->event;
send_len += sizeof(struct inotify_event);
- send_len += roundup(event->name_len,
- sizeof(struct inotify_event));
+ if (event->name_len)
+ send_len += roundup(event->name_len + 1,
+ sizeof(struct inotify_event));
}
mutex_unlock(&group->notification_mutex);
ret = put_user(send_len, (int __user *) p);
return error;
}
+/*
+ * Remove the mark from the idr (if present) and drop the reference
+ * on the mark because it was in the idr.
+ */
static void inotify_remove_from_idr(struct fsnotify_group *group,
struct inotify_inode_mark_entry *ientry)
{
struct idr *idr;
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *found_ientry;
+ int wd;
spin_lock(&group->inotify_data.idr_lock);
idr = &group->inotify_data.idr;
- idr_remove(idr, ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
+ wd = ientry->wd;
+
+ if (wd == -1)
+ goto out;
+
+ entry = idr_find(&group->inotify_data.idr, wd);
+ if (unlikely(!entry))
+ goto out;
+
+ found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ if (unlikely(found_ientry != ientry)) {
+ /* We found an entry in the idr with the right wd, but it's
+ * not the entry we were told to remove. eparis seriously
+ * fucked up somewhere. */
+ WARN_ON(1);
+ ientry->wd = -1;
+ goto out;
+ }
+
+ /* One ref for being in the idr, one ref held by the caller */
+ BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+ idr_remove(idr, wd);
ientry->wd = -1;
+
+ /* removed from the idr, drop that ref */
+ fsnotify_put_mark(entry);
+out:
+ spin_unlock(&group->inotify_data.idr_lock);
}
+
/*
- * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
- * internal reference help on the mark because it is in the idr.
+ * Send IN_IGNORED for this wd, remove this wd from the idr.
*/
void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
struct fsnotify_group *group)
/* remove this entry from the idr */
inotify_remove_from_idr(group, ientry);
- /* removed from idr, drop that reference */
- fsnotify_put_mark(entry);
-
atomic_dec(&group->inotify_data.user->inotify_watches);
}
kmem_cache_free(inotify_inode_mark_cachep, ientry);
}
-static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+static int inotify_update_existing_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
{
- struct fsnotify_mark_entry *entry = NULL;
+ struct fsnotify_mark_entry *entry;
struct inotify_inode_mark_entry *ientry;
- struct inotify_inode_mark_entry *tmp_ientry;
- int ret = 0;
- int add = (arg & IN_MASK_ADD);
- __u32 mask;
__u32 old_mask, new_mask;
+ __u32 mask;
+ int add = (arg & IN_MASK_ADD);
+ int ret;
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
if (unlikely(!mask))
return -EINVAL;
- tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!tmp_ientry))
- return -ENOMEM;
- /* we set the mask at the end after attaching it */
- fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
- tmp_ientry->wd = -1;
-
-find_entry:
spin_lock(&inode->i_lock);
entry = fsnotify_find_mark_entry(group, inode);
spin_unlock(&inode->i_lock);
- if (entry) {
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- } else {
- ret = -ENOSPC;
- if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
- goto out_err;
-retry:
- ret = -ENOMEM;
- if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
- goto out_err;
-
- spin_lock(&group->inotify_data.idr_lock);
- ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd,
- &tmp_ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
- if (ret) {
- if (ret == -EAGAIN)
- goto retry;
- goto out_err;
- }
-
- ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
- if (ret) {
- inotify_remove_from_idr(group, tmp_ientry);
- if (ret == -EEXIST)
- goto find_entry;
- goto out_err;
- }
-
- /* tmp_ientry has been added to the inode, so we are all set up.
- * now we just need to make sure tmp_ientry doesn't get freed and
- * we need to set up entry and ientry so the generic code can
- * do its thing. */
- ientry = tmp_ientry;
- entry = &ientry->fsn_entry;
- tmp_ientry = NULL;
-
- atomic_inc(&group->inotify_data.user->inotify_watches);
-
- /* update the idr hint */
- group->inotify_data.last_wd = ientry->wd;
-
- /* we put the mark on the idr, take a reference */
- fsnotify_get_mark(entry);
- }
+ if (!entry)
+ return -ENOENT;
- ret = ientry->wd;
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
spin_lock(&entry->lock);
fsnotify_recalc_group_mask(group);
}
- /* this either matches fsnotify_find_mark_entry, or init_mark_entry
- * depending on which path we took... */
+ /* return the wd */
+ ret = ientry->wd;
+
+ /* match the get from fsnotify_find_mark_entry() */
fsnotify_put_mark(entry);
+ return ret;
+}
+
+static int inotify_new_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
+{
+ struct inotify_inode_mark_entry *tmp_ientry;
+ __u32 mask;
+ int ret;
+
+ /* don't allow invalid bits: we don't want flags set */
+ mask = inotify_arg_to_mask(arg);
+ if (unlikely(!mask))
+ return -EINVAL;
+
+ tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_ientry))
+ return -ENOMEM;
+
+ fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+ tmp_ientry->fsn_entry.mask = mask;
+ tmp_ientry->wd = -1;
+
+ ret = -ENOSPC;
+ if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
+ goto out_err;
+retry:
+ ret = -ENOMEM;
+ if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+ goto out_err;
+
+ spin_lock(&group->inotify_data.idr_lock);
+ ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+ group->inotify_data.last_wd,
+ &tmp_ientry->wd);
+ spin_unlock(&group->inotify_data.idr_lock);
+ if (ret) {
+ /* idr was out of memory allocate and try again */
+ if (ret == -EAGAIN)
+ goto retry;
+ goto out_err;
+ }
+
+ /* we put the mark on the idr, take a reference */
+ fsnotify_get_mark(&tmp_ientry->fsn_entry);
+
+ /* we are on the idr, now get on the inode */
+ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ if (ret) {
+ /* we failed to get on the inode, get off the idr */
+ inotify_remove_from_idr(group, tmp_ientry);
+ goto out_err;
+ }
+
+ /* update the idr hint, who cares about races, it's just a hint */
+ group->inotify_data.last_wd = tmp_ientry->wd;
+
+ /* increment the number of watches the user has */
+ atomic_inc(&group->inotify_data.user->inotify_watches);
+
+ /* return the watch descriptor for this new entry */
+ ret = tmp_ientry->wd;
+
+ /* match the ref from fsnotify_init_markentry() */
+ fsnotify_put_mark(&tmp_ientry->fsn_entry);
+
+ /* if this mark added a new event update the group mask */
+ if (mask & ~group->mask)
+ fsnotify_recalc_group_mask(group);
+
out_err:
- /* could be an error, could be that we found an existing mark */
- if (tmp_ientry) {
- /* on the idr but didn't make it on the inode */
- if (tmp_ientry->wd != -1)
- inotify_remove_from_idr(group, tmp_ientry);
+ if (ret < 0)
kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
- }
+
+ return ret;
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+ int ret = 0;
+
+retry:
+ /* try to update and existing watch with the new arg */
+ ret = inotify_update_existing_watch(group, inode, arg);
+ /* no mark present, try to add a new one */
+ if (ret == -ENOENT)
+ ret = inotify_new_watch(group, inode, arg);
+ /*
+ * inotify_new_watch could race with another thread which did an
+ * inotify_new_watch between the update_existing and the add watch
+ * here, go back and try to update an existing mark again.
+ */
+ if (ret == -EEXIST)
+ goto retry;
return ret;
}
}
status = 0;
bail:
-
+ brelse(last_eb_bh);
mlog_exit(status);
return status;
}
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
spin_unlock(&dlm->ast_lock);
- if (in_use) {
+ if (in_use && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
res->lockname.name);
spin_lock(&res->spinlock);
if (res->state & DLM_LOCK_RES_IN_PROGRESS) {
- if (master_node) {
+ if (master_node && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres in progress!\n");
spin_unlock(&res->spinlock);
return DLM_FORWARD;
[OCFS2_LOCK_TYPE_OPEN] = "Open",
[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+ [OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync",
[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
};
#include "sysfile.h"
#include "dlmglue.h"
#include "uptodate.h"
+#include "super.h"
#include "quota.h"
static struct workqueue_struct *ocfs2_quota_wq = NULL;
int rc = 0;
struct buffer_head *tmp = *bh;
+ if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) {
+ ocfs2_error(inode->i_sb,
+ "Quota file %llu is probably corrupted! Requested "
+ "to read block %Lu but file has size only %Lu\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno,
+ (unsigned long long)v_block,
+ (unsigned long long)i_size_read(inode));
+ return -EIO;
+ }
rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0,
ocfs2_validate_quota_block);
if (rc)
{
struct ocfs2_super *osb = OCFS2_SB(sb);
+ /* Failed mount? */
+ if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED)
+ goto out;
+
/* Prevent further queueing of inode drop events */
spin_lock(&dentry_list_lock);
ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
spin_unlock(&dentry_list_lock);
/* Wait for work to finish and/or remove it */
cancel_work_sync(&osb->dentry_lock_work);
-
+out:
kill_block_super(sb);
}
cpumask_var_t shared_cpu_map;
int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
- int state);
+ int state, bool force);
u32 address;
u8 duty_offset;
/* in processor_throttling.c */
int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
-extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+extern int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
extern const struct file_operations acpi_processor_throttling_fops;
extern void acpi_processor_throttling_init(void);
/* in processor_idle.c */
struct {
int element_size;
int total_nr_elements;
- struct flex_array_part *parts[0];
+ struct flex_array_part *parts[];
};
/*
* This little trick makes sure that
.total_nr_elements = (total), \
} } }
-struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
-int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags);
void flex_array_free(struct flex_array *fa);
void flex_array_free_parts(struct flex_array *fa);
-int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
gfp_t flags);
-void *flex_array_get(struct flex_array *fa, int element_nr);
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
#endif /* _FLEX_ARRAY_H */
int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
-extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
extern struct file * open_exec(const char *);
/* fs/dcache.c -- generic fs support functions */
#include <asm/tlbflush.h>
struct ctl_table;
+struct user_struct;
int PageHuge(struct page *page);
extern const struct file_operations hugetlbfs_file_operations;
extern struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, size_t, int);
+struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
+ struct user_struct **user);
int hugetlb_get_quota(struct address_space *mapping, long delta);
void hugetlb_put_quota(struct address_space *mapping, long delta);
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acctflag) ERR_PTR(-ENOSYS)
+#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS)
#endif /* !CONFIG_HUGETLBFS */
extern u64 __init __lmb_alloc_base(u64 size,
u64 align, u64 max_addr);
extern u64 __init lmb_phys_mem_size(void);
-extern u64 __init lmb_end_of_DRAM(void);
+extern u64 lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
extern int lmb_find(struct lmb_property *res);
#define UCB_ADC_DATA 0x68
#define UCB_ADC_DAT_VALID (1 << 15)
+
+#define UCB_FCSR 0x6c
+#define UCB_FCSR_AVE (1 << 12)
+
#define UCB_ADC_DAT_MASK 0x3ff
#define UCB_ID 0x7e
}
struct qdisc_watchdog {
- struct hrtimer timer;
- struct Qdisc *qdisc;
+ struct tasklet_hrtimer timer;
+ struct Qdisc *qdisc;
};
extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc);
int initcall_debug;
core_param(initcall_debug, initcall_debug, bool, 0644);
+static char msgbuf[64];
+static struct boot_trace_call call;
+static struct boot_trace_ret ret;
+
int do_one_initcall(initcall_t fn)
{
int count = preempt_count();
ktime_t calltime, delta, rettime;
- char msgbuf[64];
- struct boot_trace_call call;
- struct boot_trace_ret ret;
if (initcall_debug) {
call.caller = task_pid_nr(current);
shm_unlock(shp);
if (!is_file_hugepages(shp->shm_file))
shmem_lock(shp->shm_file, 0, shp->mlock_user);
- else
+ else if (shp->mlock_user)
user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
shp->mlock_user);
fput (shp->shm_file);
/* hugetlb_file_setup applies strict accounting */
if (shmflg & SHM_NORESERVE)
acctflag = VM_NORESERVE;
- file = hugetlb_file_setup(name, size, acctflag);
- shp->mlock_user = current_user();
+ file = hugetlb_file_setup(name, size, acctflag,
+ &shp->mlock_user);
} else {
/*
* Do not allow no accounting for OVERCOMMIT_NEVER, even
return error;
no_id:
+ if (shp->mlock_user) /* shmflg & SHM_HUGETLB case */
+ user_shm_unlock(size, shp->mlock_user);
fput(file);
no_file:
security_shm_free(shp);
{
struct signal_struct *sig;
- if (clone_flags & CLONE_THREAD) {
- atomic_inc(¤t->signal->count);
- atomic_inc(¤t->signal->live);
+ if (clone_flags & CLONE_THREAD)
return 0;
- }
sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
tsk->signal = sig;
kmem_cache_free(signal_cachep, sig);
}
-static void cleanup_signal(struct task_struct *tsk)
-{
- struct signal_struct *sig = tsk->signal;
-
- atomic_dec(&sig->live);
-
- if (atomic_dec_and_test(&sig->count))
- __cleanup_signal(sig);
-}
-
static void copy_flags(unsigned long clone_flags, struct task_struct *p)
{
unsigned long new_flags = p->flags;
}
if (clone_flags & CLONE_THREAD) {
+ atomic_inc(¤t->signal->count);
+ atomic_inc(¤t->signal->live);
p->group_leader = current->group_leader;
list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
}
if (p->mm)
mmput(p->mm);
bad_fork_cleanup_signal:
- cleanup_signal(p);
+ if (!(clone_flags & CLONE_THREAD))
+ __cleanup_signal(p->signal);
bad_fork_cleanup_sighand:
__cleanup_sighand(p->sighand);
bad_fork_cleanup_fs:
}
EXPORT_SYMBOL(__symbol_put);
+/* Note this assumes addr is a function, which it currently always is. */
void symbol_put_addr(void *addr)
{
struct module *modaddr;
+ unsigned long a = (unsigned long)dereference_function_descriptor(addr);
- if (core_kernel_text((unsigned long)addr))
+ if (core_kernel_text(a))
return;
/* module_text_address is safe here: we're supposed to have reference
* to module from symbol_get, so it can't go away. */
- modaddr = __module_text_address((unsigned long)addr);
+ modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
}
struct module_notes_attrs *notes_attrs;
struct bin_attribute *nattr;
+ /* failed to create section attributes, so can't create notes */
+ if (!mod->sect_attrs)
+ return;
+
/* Count notes sections and allocate structures. */
notes = 0;
for (i = 0; i < nsect; i++)
size += err;
list_for_each_entry(sub, &leader->sibling_list, list_entry) {
- err = perf_counter_read_entry(counter, read_format,
+ err = perf_counter_read_entry(sub, read_format,
buf + size);
if (err < 0)
return err;
*/
int clockevents_register_notifier(struct notifier_block *nb)
{
+ unsigned long flags;
int ret;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
ret = raw_notifier_chain_register(&clockevents_chain, nb);
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
return ret;
}
*/
void clockevents_register_device(struct clock_event_device *dev)
{
+ unsigned long flags;
+
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
BUG_ON(!dev->cpumask);
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
list_add(&dev->list, &clockevent_devices);
clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev);
clockevents_notify_released();
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
void clockevents_notify(unsigned long reason, void *arg)
{
struct list_head *node, *tmp;
+ unsigned long flags;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
clockevents_do_notify(reason, arg);
switch (reason) {
default:
break;
}
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_notify);
#endif
* Powerstate information: The system enters/leaves a state, where
* affected devices might stop
*/
-static void tick_do_broadcast_on_off(void *why)
+static void tick_do_broadcast_on_off(unsigned long *reason)
{
struct clock_event_device *bc, *dev;
struct tick_device *td;
- unsigned long flags, *reason = why;
+ unsigned long flags;
int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
printk(KERN_ERR "tick-broadcast: ignoring broadcast for "
"offline CPU #%d\n", *oncpu);
else
- smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
- &reason, 1);
+ tick_do_broadcast_on_off(&reason);
}
/*
{
struct proc_dir_entry *pe;
- pe = proc_create("timer_list", 0644, NULL, &timer_list_fops);
+ pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
if (!pe)
return -ENOMEM;
return 0;
read++;
cnt--;
- if (!(iter->flags & ~FTRACE_ITER_CONT)) {
+ /*
+ * If the parser haven't finished with the last write,
+ * continue reading the user input without skipping spaces.
+ */
+ if (!(iter->flags & FTRACE_ITER_CONT)) {
/* skip white space */
while (cnt && isspace(ch)) {
ret = get_user(ch, ubuf++);
cnt--;
}
+ /* only spaces were written */
if (isspace(ch)) {
- file->f_pos += read;
+ *ppos += read;
ret = read;
goto out;
}
if (ret)
goto out;
iter->buffer_idx = 0;
- } else
+ } else {
iter->flags |= FTRACE_ITER_CONT;
+ iter->buffer[iter->buffer_idx++] = ch;
+ }
-
- file->f_pos += read;
-
+ *ppos += read;
ret = read;
out:
mutex_unlock(&ftrace_regex_lock);
if (ret < 0)
return ret;
- switch (val) {
- case 0:
- trace_flags &= ~(1 << index);
- break;
- case 1:
- trace_flags |= 1 << index;
- break;
-
- default:
+ if (val != 0 && val != 1)
return -EINVAL;
- }
+ set_tracer_flags(1 << index, val);
*ppos += cnt;
return true;
/* driver filter on and initialized */
- if (current_driver && dev->driver == current_driver)
+ if (current_driver && dev && dev->driver == current_driver)
return true;
+ /* driver filter on, but we can't filter on a NULL device... */
+ if (!dev)
+ return false;
+
if (current_driver || !current_driver_name[0])
return false;
return ret;
}
-#define err_printk(dev, entry, format, arg...) do { \
- error_count += 1; \
- if (driver_filter(dev) && \
- (show_all_errors || show_num_errors > 0)) { \
- WARN(1, "%s %s: " format, \
- dev_driver_string(dev), \
- dev_name(dev) , ## arg); \
- dump_entry_trace(entry); \
- } \
- if (!show_all_errors && show_num_errors > 0) \
- show_num_errors -= 1; \
+#define err_printk(dev, entry, format, arg...) do { \
+ error_count += 1; \
+ if (driver_filter(dev) && \
+ (show_all_errors || show_num_errors > 0)) { \
+ WARN(1, "%s %s: " format, \
+ dev ? dev_driver_string(dev) : "NULL", \
+ dev ? dev_name(dev) : "NULL", ## arg); \
+ dump_entry_trace(entry); \
+ } \
+ if (!show_all_errors && show_num_errors > 0) \
+ show_num_errors -= 1; \
} while (0);
/*
* capacity in the base structure. Also note that no effort is made
* to efficiently pack objects across page boundaries.
*/
-struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags)
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags)
{
struct flex_array *ret;
int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
return ret;
}
-static int fa_element_to_part_nr(struct flex_array *fa, int element_nr)
+static int fa_element_to_part_nr(struct flex_array *fa,
+ unsigned int element_nr)
{
return element_nr / __elements_per_part(fa->element_size);
}
/**
* flex_array_free_parts - just free the second-level pages
- * @src: address of data to copy into the array
- * @element_nr: index of the position in which to insert
- * the new element.
*
* This is to be used in cases where the base 'struct flex_array'
* has been statically allocated and should not be free.
kfree(fa);
}
-static int fa_index_inside_part(struct flex_array *fa, int element_nr)
+static unsigned int index_inside_part(struct flex_array *fa,
+ unsigned int element_nr)
{
- return element_nr % __elements_per_part(fa->element_size);
-}
+ unsigned int part_offset;
-static int index_inside_part(struct flex_array *fa, int element_nr)
-{
- int part_offset = fa_index_inside_part(fa, element_nr);
+ part_offset = element_nr % __elements_per_part(fa->element_size);
return part_offset * fa->element_size;
}
*
* Locking must be provided by the caller.
*/
-int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags)
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+ gfp_t flags)
{
int part_nr = fa_element_to_part_nr(fa, element_nr);
struct flex_array_part *part;
return -ENOSPC;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
- else
+ else {
part = __fa_get_part(fa, part_nr, flags);
- if (!part)
- return -ENOMEM;
+ if (!part)
+ return -ENOMEM;
+ }
dst = &part->elements[index_inside_part(fa, element_nr)];
memcpy(dst, src, fa->element_size);
return 0;
*
* Locking must be provided by the caller.
*/
-int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags)
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags)
{
int start_part;
int end_part;
*
* Locking must be provided by the caller.
*/
-void *flex_array_get(struct flex_array *fa, int element_nr)
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
{
int part_nr = fa_element_to_part_nr(fa, element_nr);
struct flex_array_part *part;
if (element_nr >= fa->total_nr_elements)
return NULL;
- if (!fa->parts[part_nr])
- return NULL;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
- else
+ else {
part = fa->parts[part_nr];
+ if (!part)
+ return NULL;
+ }
return &part->elements[index_inside_part(fa, element_nr)];
}
return lmb.memory.size;
}
-u64 __init lmb_end_of_DRAM(void)
+u64 lmb_end_of_DRAM(void)
{
int idx = lmb.memory.cnt - 1;
*/
if (vma->vm_flags & VM_LOCKED) {
*mapcount = 1; /* break early from loop */
+ *vm_flags |= VM_LOCKED;
goto out_unmap;
}
referenced = page_referenced(page, 1,
sc->mem_cgroup, &vm_flags);
- /* In active use or really unfreeable? Activate it. */
+ /*
+ * In active use or really unfreeable? Activate it.
+ * If page which have PG_mlocked lost isoltation race,
+ * try_to_unmap moves it to unevictable list
+ */
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
- referenced && page_mapping_inuse(page))
+ referenced && page_mapping_inuse(page)
+ && !(vm_flags & VM_LOCKED))
goto activate_locked;
/*
p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...);
/**
- * v9fs_parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @v9ses: existing v9fs session information
+ * parse_options - parse mount options into client structure
+ * @opts: options string passed from mount
+ * @clnt: existing v9fs client information
*
* Return 0 upon success, -ERRNO upon failure
*/
/**
* p9_tag_init - setup tags structure and contents
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This initializes the tags structure for each client instance.
*
/**
* p9_tag_cleanup - cleans up tags structure and reclaims resources
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This frees resources associated with the tags structure
*
if (c->dotu)
err = -ecode;
- if (!err) {
+ if (!err || !IS_ERR_VALUE(err))
err = p9_errstr2errno(ename, strlen(ename));
- /* string match failed */
- if (!err)
- err = -ESERVERFAULT;
- }
-
P9_DPRINTK(P9_DEBUG_9P, "<<< RERROR (%d) %s\n", -ecode, ename);
kfree(ename);
/**
* p9_client_flush - flush (cancel) a request
- * c: client state
- * req: request to cancel
+ * @c: client state
+ * @oldreq: request to cancel
*
* This sents a flush for a particular requests and links
* the flush request to the original request. The current
errstr[len] = 0;
printk(KERN_ERR "%s: server reported unknown error %s\n",
__func__, errstr);
- errno = 1;
+ errno = ESERVERFAULT;
}
return -errno;
* @wpos: write position for current frame
* @wsize: amount of data to write for current frame
* @wbuf: current write buffer
+ * @poll_pending_link: pending links to be polled per conn
* @poll_wait: array of wait_q's for various worker threads
- * @poll_waddr: ????
* @pt: poll state
* @rq: current read work
* @wq: current write work
}
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into p9_fd_opts structure
+ * @params: options string passed from mount
+ * @opts: fd transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
* @pd: Protection Domain pointer
* @qp: Queue Pair pointer
* @cq: Completion Queue pointer
+ * @dm_mr: DMA Memory Region pointer
* @lkey: The local access only memory region key
* @timeout: Number of uSecs to wait for connection management events
* @sq_depth: The depth of the Send Queue
* @sq_sem: Semaphore for the SQ
* @rq_depth: The depth of the Receive Queue.
+ * @rq_count: Count of requests in the Receive Queue.
* @addr: The remote peer's address
* @req_lock: Protects the active request list
- * @send_wait: Wait list when the SQ fills up
* @cm_done: Completion event for connection management tracking
*/
struct p9_trans_rdma {
};
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into rdma options structure
+ * @params: options string passed from mount
+ * @opts: rdma transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
* @initialized: whether the channel is initialized
* @inuse: whether the channel is in use
* @lock: protects multiple elements within this structure
+ * @client: client instance
* @vdev: virtio dev associated with this channel
* @vq: virtio queue associated with this channel
- * @tagpool: accounting for tag ids (and request slots)
- * @reqs: array of request slots
- * @max_tag: current number of request_slots allocated
* @sg: scatter gather list which is used to pack a request (protected?)
*
* We keep all per-channel information in a structure.
/**
* p9_virtio_close - reclaim resources of a channel
- * @trans: transport state
+ * @client: client instance
*
* This reclaims a channel by freeing its resources and
* reseting its inuse flag.
/**
* p9_virtio_request - issue a request
- * @t: transport state
- * @tc: &p9_fcall request to transmit
- * @rc: &p9_fcall to put reponse into
+ * @client: client instance issuing the request
+ * @req: request to be issued
*
*/
udelay(USEC_PER_POLL);
}
+
+ WARN_ONCE(!irqs_disabled(),
+ "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
+ dev->name, ops->ndo_start_xmit);
+
local_irq_restore(flags);
}
inet->cork.addr = ipc->addr;
}
rt = *rtp;
+ if (unlikely(!rt))
+ return -EFAULT;
/*
* We steal reference to this route, caller should not release it
*/
v4addr != htonl(INADDR_ANY) &&
chk_addr_ret != RTN_LOCAL &&
chk_addr_ret != RTN_MULTICAST &&
- chk_addr_ret != RTN_BROADCAST)
+ chk_addr_ret != RTN_BROADCAST) {
+ err = -EADDRNOTAVAIL;
goto out;
+ }
} else {
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
struct llc_sock *llc = llc_sk(sk);
int rc = 0;
+ memset(&sllc, 0, sizeof(sllc));
lock_sock(sk);
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
*
* @key: key to add to do item for
* @flag: todo flag(s)
+ *
+ * Must be called with IRQs or softirqs disabled.
*/
static void add_todo(struct ieee80211_key *key, u32 flag)
{
ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
if (!ret) {
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP)
if (!key || !key->local->ops->set_key)
return;
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
return;
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
sta = get_sta_for_key(key);
sdata = key->sdata;
wiphy_name(key->local->hw.wiphy),
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
__ieee80211_key_replace(sdata, sta, old_key, key);
- spin_unlock_irqrestore(&sdata->local->key_lock, flags);
-
/* free old key later */
add_todo(old_key, KEY_FLAG_TODO_DELETE);
add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
if (netif_running(sdata->dev))
add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
+
+ spin_unlock_irqrestore(&sdata->local->key_lock, flags);
}
static void __ieee80211_key_free(struct ieee80211_key *key)
*/
synchronize_rcu();
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
while (!list_empty(&todo_list)) {
key = list_first_entry(&todo_list, struct ieee80211_key, todo);
list_del_init(&key->todo);
KEY_FLAG_TODO_HWACCEL_REMOVE |
KEY_FLAG_TODO_DELETE);
key->flags &= ~todoflags;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
work_done = false;
WARN_ON(!work_done);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
void ieee80211_key_todo(void)
q->master = kmalloc(sizeof(*q->master), GFP_KERNEL);
if (q->master == NULL)
- return -ENOMEM;
+ return false;
q->master->quota = q->quota;
return true;
static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer)
{
struct qdisc_watchdog *wd = container_of(timer, struct qdisc_watchdog,
- timer);
+ timer.timer);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
__netif_schedule(qdisc_root(wd->qdisc));
void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc)
{
- hrtimer_init(&wd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
- wd->timer.function = qdisc_watchdog;
+ tasklet_hrtimer_init(&wd->timer, qdisc_watchdog,
+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
wd->qdisc = qdisc;
}
EXPORT_SYMBOL(qdisc_watchdog_init);
wd->qdisc->flags |= TCQ_F_THROTTLED;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(expires));
- hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
}
EXPORT_SYMBOL(qdisc_watchdog_schedule);
void qdisc_watchdog_cancel(struct qdisc_watchdog *wd)
{
- hrtimer_cancel(&wd->timer);
+ tasklet_hrtimer_cancel(&wd->timer);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
}
EXPORT_SYMBOL(qdisc_watchdog_cancel);
psched_time_t now_rt; /* Cached real time */
unsigned pmask;
- struct hrtimer delay_timer;
+ struct tasklet_hrtimer delay_timer;
struct qdisc_watchdog watchdog; /* Watchdog timer,
started when CBQ has
backlog, but cannot
cl->undertime = q->now + delay;
if (delay > 0) {
+ struct hrtimer *ht;
+
sched += delay + cl->penalty;
cl->penalized = sched;
cl->cpriority = TC_CBQ_MAXPRIO;
expires = ktime_set(0, 0);
expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched));
- if (hrtimer_try_to_cancel(&q->delay_timer) &&
- ktime_to_ns(ktime_sub(
- hrtimer_get_expires(&q->delay_timer),
- expires)) > 0)
- hrtimer_set_expires(&q->delay_timer, expires);
- hrtimer_restart(&q->delay_timer);
+ ht = &q->delay_timer.timer;
+ if (hrtimer_try_to_cancel(ht) &&
+ ktime_to_ns(ktime_sub(hrtimer_get_expires(ht),
+ expires)) > 0)
+ hrtimer_set_expires(ht, expires);
+ hrtimer_restart(ht);
cl->delayed = 1;
cl->xstats.overactions++;
return;
static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
{
struct cbq_sched_data *q = container_of(timer, struct cbq_sched_data,
- delay_timer);
+ delay_timer.timer);
struct Qdisc *sch = q->watchdog.qdisc;
psched_time_t now;
psched_tdiff_t delay = 0;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
- hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
}
sch->flags &= ~TCQ_F_THROTTLED;
q->tx_class = NULL;
q->tx_borrowed = NULL;
qdisc_watchdog_cancel(&q->watchdog);
- hrtimer_cancel(&q->delay_timer);
+ tasklet_hrtimer_cancel(&q->delay_timer);
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
q->now_rt = q->now;
q->link.minidle = -0x7FFFFFFF;
qdisc_watchdog_init(&q->watchdog, sch);
- hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_init(&q->delay_timer, cbq_undelay,
+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
q->delay_timer.function = cbq_undelay;
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
rpc_task_force_reencode(struct rpc_task *task)
{
task->tk_rqstp->rq_snd_buf.len = 0;
+ task->tk_rqstp->rq_bytes_sent = 0;
}
static inline void
{
struct hash_desc desc;
struct scatterlist sg[1];
- loff_t i_size;
+ loff_t i_size, offset = 0;
char *rbuf;
- int rc, offset = 0;
+ int rc;
rc = init_desc(&desc);
if (rc != 0)
rc = rbuf_len;
break;
}
+ if (rbuf_len == 0)
+ break;
offset += rbuf_len;
sg_init_one(sg, rbuf, rbuf_len);
else if (mask & (MAY_READ | MAY_EXEC))
iint->readcount--;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
/*
if (file->f_mode & FMODE_WRITE)
iint->writecount++;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
EXPORT_SYMBOL_GPL(ima_counts_get);
int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask)
{
unsigned int k;
- int changed = 0;
+ struct snd_interval list_range;
if (!count) {
i->empty = 1;
return -EINVAL;
}
+ snd_interval_any(&list_range);
+ list_range.min = UINT_MAX;
+ list_range.max = 0;
for (k = 0; k < count; k++) {
if (mask && !(mask & (1 << k)))
continue;
- if (i->min == list[k] && !i->openmin)
- goto _l1;
- if (i->min < list[k]) {
- i->min = list[k];
- i->openmin = 0;
- changed = 1;
- goto _l1;
- }
- }
- i->empty = 1;
- return -EINVAL;
- _l1:
- for (k = count; k-- > 0;) {
- if (mask && !(mask & (1 << k)))
+ if (!snd_interval_test(i, list[k]))
continue;
- if (i->max == list[k] && !i->openmax)
- goto _l2;
- if (i->max > list[k]) {
- i->max = list[k];
- i->openmax = 0;
- changed = 1;
- goto _l2;
- }
+ list_range.min = min(list_range.min, list[k]);
+ list_range.max = max(list_range.max, list[k]);
}
- i->empty = 1;
- return -EINVAL;
- _l2:
- if (snd_interval_checkempty(i)) {
- i->empty = 1;
- return -EINVAL;
- }
- return changed;
+ return snd_interval_refine(i, &list_range);
}
EXPORT_SYMBOL(snd_interval_list);
unsigned int res;
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
res = snd_ali_5451_peek(codec,port);
if (!(res & 0x8000))
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_ali_5451_poke(codec, port, res & ~0x8000);
snd_printdd("ali_codec_ready: codec is not ready.\n ");
return -EIO;
unsigned long dwChk1,dwChk2;
dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
- dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
-
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
if (dwChk2 != dwChk1)
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
return -EIO;
}
};
/*
- * 6ch mode
+ * 4ch mode
*/
-static struct hda_verb alc885_mbp_ch6_init[] = {
+static struct hda_verb alc885_mbp_ch4_init[] = {
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
{ } /* end */
};
-static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
+static struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
{ 2, alc885_mbp_ch2_init },
- { 6, alc885_mbp_ch6_init },
+ { 4, alc885_mbp_ch4_init },
};
/*
};
static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* HP Pin: output 0 (0x0d) */
+ /* HP Pin: output 0 (0x0e) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
.mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
.init_verbs = { alc885_mbp3_init_verbs,
alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .num_dacs = 2,
.dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes),
+ .hp_nid = 0x04,
+ .channel_mode = alc885_mbp_4ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
.input_mux = &alc882_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708_capture_mixer;
spec->num_mixers++;
}
struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
return -EINVAL;
if (ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
return -EINVAL;
mutex_lock(&_chip->mixer_mutex);
if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
static char default_sort_order[] = "comm,symbol";
static char *sort_order = default_sort_order;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
exit(-1);
}
+ if (!force && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ exit(-1);
+ }
+
if (!stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
"input file name"),
OPT_STRING('s', "symbol", &sym_hist_filter, "symbol",
"symbol to annotate"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
static struct strlist *dso_list, *comm_list, *sym_list;
static char *field_sep;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
exit(-1);
}
+ if (!force && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ exit(-1);
+ }
+
if (!stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('m', "modules", &modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
projects / deliverable / linux.git / commitdiff
