Definition: There is one reg region describing the port
configuration registers.
+- fsl,fman-10g-port
+ Usage: optional
+ Value type: boolean
+ Definition: The default port rate is 1G.
+ If this property exists, the port is s 10G port.
+
+- fsl,fman-best-effort-port
+ Usage: optional
+ Value type: boolean
+ Definition: Can be defined only if 10G-support is set.
+ This property marks a best-effort 10G port (10G port that
+ may not be capable of line rate).
+
EXAMPLE
port@a8000 {
- compatible : Should define the compatible device type for
global-utilities.
+ Possible compatibles:
+ "fsl,qoriq-device-config-1.0"
+ "fsl,qoriq-device-config-2.0"
+ "fsl,<chip>-device-config"
+ "fsl,<chip>-guts"
- reg : Offset and length of the register set for the device.
Recommended properties:
For additional details about the PAMU/LIODN binding(s) see pamu.txt
-- fsl,qman-channel-id
+- cell-index
Usage: Required
Value type: <u32>
Definition: The hardware index of the channel. This can also be
reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <106 2 0 0>;
fsl,liodn = <3 4>;
- fsl,qman-channel-id = <1>;
+ cell-index = <1>;
fman0 {
fsl,liodn = <0x22>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
};
-/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
- compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
+ compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen",
+ "fsl,qoriq-clockgen-2.0";
};
rcpm: global-utilities@e2000 {
};
};
+&qportals {
+ qportal14: qman-portal@38000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+ interrupts = <132 0x2 0 0>;
+ cell-index = <0xe>;
+ };
+ qportal15: qman-portal@3c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+ interrupts = <134 0x2 0 0>;
+ cell-index = <0xf>;
+ };
+ qportal16: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+ interrupts = <136 0x2 0 0>;
+ cell-index = <0x10>;
+ };
+ qportal17: qman-portal@44000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+ interrupts = <138 0x2 0 0>;
+ cell-index = <0x11>;
+ };
+ qportal18: qman-portal@48000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+ interrupts = <140 0x2 0 0>;
+ cell-index = <0x12>;
+ };
+ qportal19: qman-portal@4c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+ interrupts = <142 0x2 0 0>;
+ cell-index = <0x13>;
+ };
+ qportal20: qman-portal@50000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+ interrupts = <144 0x2 0 0>;
+ cell-index = <0x14>;
+ };
+ qportal21: qman-portal@54000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+ interrupts = <146 0x2 0 0>;
+ cell-index = <0x15>;
+ };
+ qportal22: qman-portal@58000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+ interrupts = <148 0x2 0 0>;
+ cell-index = <0x16>;
+ };
+ qportal23: qman-portal@5c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+ interrupts = <150 0x2 0 0>;
+ cell-index = <0x17>;
+ };
+ qportal24: qman-portal@60000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+ interrupts = <152 0x2 0 0>;
+ cell-index = <0x18>;
+ };
+};
+
&soc {
ddr2: memory-controller@9000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
};
-/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
- compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
+ compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen",
+ "fsl,qoriq-clockgen-2.0";
};
rcpm: global-utilities@e2000 {
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&ifc {
#address-cells = <2>;
#size-cells = <1>;
};
};
+&qportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <104 0x2 0 0>;
+ cell-index = <0x0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <106 0x2 0 0>;
+ cell-index = <0x1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <108 0x2 0 0>;
+ cell-index = <0x2>;
+ };
+ qportal3: qman-portal@c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <110 0x2 0 0>;
+ cell-index = <0x3>;
+ };
+ qportal4: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <112 0x2 0 0>;
+ cell-index = <0x4>;
+ };
+ qportal5: qman-portal@14000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <114 0x2 0 0>;
+ cell-index = <0x5>;
+ };
+ qportal6: qman-portal@18000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+ interrupts = <116 0x2 0 0>;
+ cell-index = <0x6>;
+ };
+ qportal7: qman-portal@1c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+ interrupts = <118 0x2 0 0>;
+ cell-index = <0x7>;
+ };
+ qportal8: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+ interrupts = <120 0x2 0 0>;
+ cell-index = <0x8>;
+ };
+ qportal9: qman-portal@24000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+ interrupts = <122 0x2 0 0>;
+ cell-index = <0x9>;
+ };
+ qportal10: qman-portal@28000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+ interrupts = <124 0x2 0 0>;
+ cell-index = <0xa>;
+ };
+ qportal11: qman-portal@2c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+ interrupts = <126 0x2 0 0>;
+ cell-index = <0xb>;
+ };
+ qportal12: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+ interrupts = <128 0x2 0 0>;
+ cell-index = <0xc>;
+ };
+ qportal13: qman-portal@34000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+ interrupts = <130 0x2 0 0>;
+ cell-index = <0xd>;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,liodn-bits = <12>;
};
+/include/ "qoriq-clockgen2.dtsi"
clockgen: global-utilities@e1000 {
compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
reg = <0xe1000 0x1000>;
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux0";
+ };
};
rcpm: global-utilities@e2000 {
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-sec5.3-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+ qman: qman@318000 {
+ interrupts = <16 2 1 28>;
+ };
+
/include/ "qoriq-bman1.dtsi"
bman: bman@31a000 {
interrupts = <16 2 1 29>;
alloc-ranges = <0 0 0x10 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
&lbc {
#address-cells = <2>;
#size-cells = <1>;
};
};
+&qportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x100000 0x1000>;
+ interrupts = <29 2 0 0>;
+ cell-index = <0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x101000 0x1000>;
+ interrupts = <31 2 0 0>;
+ cell-index = <1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x102000 0x1000>;
+ interrupts = <33 2 0 0>;
+ cell-index = <2>;
+ };
+};
+
&bportals {
#address-cells = <1>;
#size-cells = <1>;
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
+ qman: qman@88000 {
+ compatible = "fsl,qman";
+ reg = <0x88000 0x1000>;
+ interrupts = <16 2 0 0>;
+ fsl,qman-portals = <&qportals>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+ };
+
bman: bman@8a000 {
compatible = "fsl,bman";
reg = <0x8a000 0x1000>;
alloc-ranges = <0 0 0x10 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
&lbc {
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
/include/ "qoriq-bman1-portals.dtsi"
+/include/ "qoriq-qman1-portals.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,iommu-parent = <&pamu1>;
};
+/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
};
alloc-ranges = <0 0 0x10 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
&lbc {
compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
/include/ "qoriq-bman1-portals.dtsi"
+/include/ "qoriq-qman1-portals.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,iommu-parent = <&pamu1>;
};
+/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
};
alloc-ranges = <0 0 0x10 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10 0>;
+};
+
&lbc {
compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
/include/ "qoriq-bman1-portals.dtsi"
+/include/ "qoriq-qman1-portals.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,iommu-parent = <&pamu1>;
};
+/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
};
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&lbc {
compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
/include/ "qoriq-bman1-portals.dtsi"
+/include/ "qoriq-qman1-portals.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,iommu-parent = <&pamu1>;
};
+/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-raid1.0-0.dtsi"
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&lbc {
compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
/include/ "qoriq-bman1-portals.dtsi"
+/include/ "qoriq-qman1-portals.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,iommu-parent = <&pamu4>;
};
+/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
};
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x100000 0x1000>;
interrupts = <104 2 0 0>;
- fsl,qman-channel-id = <0x0>;
+ cell-index = <0x0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <106 2 0 0>;
- fsl,qman-channel-id = <1>;
+ cell-index = <1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x102000 0x1000>;
interrupts = <108 2 0 0>;
- fsl,qman-channel-id = <2>;
+ cell-index = <2>;
};
qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x103000 0x1000>;
interrupts = <110 2 0 0>;
- fsl,qman-channel-id = <3>;
+ cell-index = <3>;
};
qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x104000 0x1000>;
interrupts = <112 2 0 0>;
- fsl,qman-channel-id = <4>;
+ cell-index = <4>;
};
qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x105000 0x1000>;
interrupts = <114 2 0 0>;
- fsl,qman-channel-id = <5>;
+ cell-index = <5>;
};
qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x106000 0x1000>;
interrupts = <116 2 0 0>;
- fsl,qman-channel-id = <6>;
+ cell-index = <6>;
};
qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x107000 0x1000>;
interrupts = <118 2 0 0>;
- fsl,qman-channel-id = <7>;
+ cell-index = <7>;
};
qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x108000 0x1000>;
interrupts = <120 2 0 0>;
- fsl,qman-channel-id = <8>;
+ cell-index = <8>;
};
qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x109000 0x1000>;
interrupts = <122 2 0 0>;
- fsl,qman-channel-id = <9>;
+ cell-index = <9>;
};
};
--- /dev/null
+/*
+ * T1023 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+ compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <20 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <20 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+&pci1 {
+ compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ interrupts = <21 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <21 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&pci2 {
+ compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <22 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <22 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
+ reg = <0x1000 0x1000 0x1002000 0x10000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0x1A000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-snpc@30000 {
+ compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x30000 0x1000 0x1022000 0x10000>;
+ };
+ dcsr-snpc@31000 {
+ compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x31000 0x1000 0x1042000 0x10000>;
+ };
+ dcsr-cpu-sb-proxy@100000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x100000 0x1000 0x101000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@108000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x108000 0x1000 0x109000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <16>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v5.0",
+ "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,t1023-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x1000>;
+ ranges = <0 0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <128 1>;
+ fsl,secondary-cache-geometry = <32 2>;
+ };
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ fsl,liodn-bits = <12>;
+ };
+
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
+ compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 4>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>;
+ clock-names = "pll0_0", "pll0_1";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 4>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>;
+ clock-names = "pll0_0", "pll0_1";
+ clock-output-names = "cmux1";
+ };
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,t1023-sfp";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,t1023-serdes";
+ reg = <0xea000 0x4000>;
+ };
+
+ scfg: global-utilities@fc000 {
+ compatible = "fsl,t1023-scfg";
+ reg = <0xfc000 0x1000>;
+ };
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ compatible = "fsl,t1023-esdhc", "fsl,esdhc";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+ sdhci,auto-cmd12;
+ no-1-8-v;
+ };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
+/include/ "qoriq-sec5.0-0.dtsi"
+};
--- /dev/null
+/*
+ * T1024 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1023si-post.dtsi"
+
+/ {
+ aliases {
+ vga = &display;
+ display = &display;
+ };
+
+ qe:qe@ffe140000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ };
+};
+
+&soc {
+ display:display@180000 {
+ compatible = "fsl,t1024-diu", "fsl,diu";
+ reg = <0x180000 1000>;
+ interrupts = <74 2 0 0>;
+ };
+};
+
+&qe {
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * T1024/T1023 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ dma0 = &dma0;
+ dma1 = &dma1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ sdhc = &sdhc;
+
+ crypto = &crypto;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&mux0>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&mux1>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&ifc {
#address-cells = <2>;
#size-cells = <1>;
};
};
+&qportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <104 0x2 0 0>;
+ cell-index = <0x0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <106 0x2 0 0>;
+ cell-index = <0x1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <108 0x2 0 0>;
+ cell-index = <0x2>;
+ };
+ qportal3: qman-portal@c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <110 0x2 0 0>;
+ cell-index = <0x3>;
+ };
+ qportal4: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <112 0x2 0 0>;
+ cell-index = <0x4>;
+ };
+ qportal5: qman-portal@14000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <114 0x2 0 0>;
+ cell-index = <0x5>;
+ };
+ qportal6: qman-portal@18000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+ interrupts = <116 0x2 0 0>;
+ cell-index = <0x6>;
+ };
+ qportal7: qman-portal@1c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+ interrupts = <118 0x2 0 0>;
+ cell-index = <0x7>;
+ };
+ qportal8: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+ interrupts = <120 0x2 0 0>;
+ cell-index = <0x8>;
+ };
+ qportal9: qman-portal@24000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+ interrupts = <122 0x2 0 0>;
+ cell-index = <0x9>;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
};
/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
};
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&ifc {
#address-cells = <2>;
#size-cells = <1>;
};
};
+&qportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <104 0x2 0 0>;
+ cell-index = <0x0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <106 0x2 0 0>;
+ cell-index = <0x1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <108 0x2 0 0>;
+ cell-index = <0x2>;
+ };
+ qportal3: qman-portal@c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <110 0x2 0 0>;
+ cell-index = <0x3>;
+ };
+ qportal4: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <112 0x2 0 0>;
+ cell-index = <0x4>;
+ };
+ qportal5: qman-portal@14000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <114 0x2 0 0>;
+ cell-index = <0x5>;
+ };
+ qportal6: qman-portal@18000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+ interrupts = <116 0x2 0 0>;
+ cell-index = <0x6>;
+ };
+ qportal7: qman-portal@1c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+ interrupts = <118 0x2 0 0>;
+ cell-index = <0x7>;
+ };
+ qportal8: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+ interrupts = <120 0x2 0 0>;
+ cell-index = <0x8>;
+ };
+ qportal9: qman-portal@24000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+ interrupts = <122 0x2 0 0>;
+ cell-index = <0x9>;
+ };
+ qportal10: qman-portal@28000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+ interrupts = <124 0x2 0 0>;
+ cell-index = <0xa>;
+ };
+ qportal11: qman-portal@2c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+ interrupts = <126 0x2 0 0>;
+ cell-index = <0xb>;
+ };
+ qportal12: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+ interrupts = <128 0x2 0 0>;
+ cell-index = <0xc>;
+ };
+ qportal13: qman-portal@34000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+ interrupts = <130 0x2 0 0>;
+ cell-index = <0xd>;
+ };
+ qportal14: qman-portal@38000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+ interrupts = <132 0x2 0 0>;
+ cell-index = <0xe>;
+ };
+ qportal15: qman-portal@3c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+ interrupts = <134 0x2 0 0>;
+ cell-index = <0xf>;
+ };
+ qportal16: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+ interrupts = <136 0x2 0 0>;
+ cell-index = <0x10>;
+ };
+ qportal17: qman-portal@44000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+ interrupts = <138 0x2 0 0>;
+ cell-index = <0x11>;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux1";
};
phy_type = "utmi";
};
/include/ "qoriq-sec5.2-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
L2_1: l2-cache-controller@c20000 {
alloc-ranges = <0 0 0x10000 0>;
};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&ifc {
#address-cells = <2>;
#size-cells = <1>;
};
};
+&qportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <104 0x2 0 0>;
+ cell-index = <0x0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <106 0x2 0 0>;
+ cell-index = <0x1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <108 0x2 0 0>;
+ cell-index = <0x2>;
+ };
+ qportal3: qman-portal@c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <110 0x2 0 0>;
+ cell-index = <0x3>;
+ };
+ qportal4: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <112 0x2 0 0>;
+ cell-index = <0x4>;
+ };
+ qportal5: qman-portal@14000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <114 0x2 0 0>;
+ cell-index = <0x5>;
+ };
+ qportal6: qman-portal@18000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+ interrupts = <116 0x2 0 0>;
+ cell-index = <0x6>;
+ };
+ qportal7: qman-portal@1c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+ interrupts = <118 0x2 0 0>;
+ cell-index = <0x7>;
+ };
+ qportal8: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+ interrupts = <120 0x2 0 0>;
+ cell-index = <0x8>;
+ };
+ qportal9: qman-portal@24000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+ interrupts = <122 0x2 0 0>;
+ cell-index = <0x9>;
+ };
+ qportal10: qman-portal@28000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+ interrupts = <124 0x2 0 0>;
+ cell-index = <0xa>;
+ };
+ qportal11: qman-portal@2c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+ interrupts = <126 0x2 0 0>;
+ cell-index = <0xb>;
+ };
+ qportal12: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+ interrupts = <128 0x2 0 0>;
+ cell-index = <0xc>;
+ };
+ qportal13: qman-portal@34000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+ interrupts = <130 0x2 0 0>;
+ cell-index = <0xd>;
+ };
+ qportal14: qman-portal@38000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+ interrupts = <132 0x2 0 0>;
+ cell-index = <0xe>;
+ };
+ qportal15: qman-portal@3c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+ interrupts = <134 0x2 0 0>;
+ cell-index = <0xf>;
+ };
+ qportal16: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+ interrupts = <136 0x2 0 0>;
+ cell-index = <0x10>;
+ };
+ qportal17: qman-portal@44000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+ interrupts = <138 0x2 0 0>;
+ cell-index = <0x11>;
+ };
+ qportal18: qman-portal@48000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+ interrupts = <140 0x2 0 0>;
+ cell-index = <0x12>;
+ };
+ qportal19: qman-portal@4c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+ interrupts = <142 0x2 0 0>;
+ cell-index = <0x13>;
+ };
+ qportal20: qman-portal@50000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+ interrupts = <144 0x2 0 0>;
+ cell-index = <0x14>;
+ };
+ qportal21: qman-portal@54000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+ interrupts = <146 0x2 0 0>;
+ cell-index = <0x15>;
+ };
+ qportal22: qman-portal@58000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+ interrupts = <148 0x2 0 0>;
+ cell-index = <0x16>;
+ };
+ qportal23: qman-portal@5c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+ interrupts = <150 0x2 0 0>;
+ cell-index = <0x17>;
+ };
+ qportal24: qman-portal@60000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+ interrupts = <152 0x2 0 0>;
+ cell-index = <0x18>;
+ };
+ qportal25: qman-portal@64000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+ interrupts = <154 0x2 0 0>;
+ cell-index = <0x19>;
+ };
+ qportal26: qman-portal@68000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+ interrupts = <156 0x2 0 0>;
+ cell-index = <0x1a>;
+ };
+ qportal27: qman-portal@6c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+ interrupts = <158 0x2 0 0>;
+ cell-index = <0x1b>;
+ };
+ qportal28: qman-portal@70000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+ interrupts = <160 0x2 0 0>;
+ cell-index = <0x1c>;
+ };
+ qportal29: qman-portal@74000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+ interrupts = <162 0x2 0 0>;
+ cell-index = <0x1d>;
+ };
+ qportal30: qman-portal@78000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+ interrupts = <164 0x2 0 0>;
+ cell-index = <0x1e>;
+ };
+ qportal31: qman-portal@7c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+ interrupts = <166 0x2 0 0>;
+ cell-index = <0x1f>;
+ };
+ qportal32: qman-portal@80000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+ interrupts = <168 0x2 0 0>;
+ cell-index = <0x20>;
+ };
+ qportal33: qman-portal@84000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+ interrupts = <170 0x2 0 0>;
+ cell-index = <0x21>;
+ };
+ qportal34: qman-portal@88000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+ interrupts = <172 0x2 0 0>;
+ cell-index = <0x22>;
+ };
+ qportal35: qman-portal@8c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+ interrupts = <174 0x2 0 0>;
+ cell-index = <0x23>;
+ };
+ qportal36: qman-portal@90000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+ interrupts = <384 0x2 0 0>;
+ cell-index = <0x24>;
+ };
+ qportal37: qman-portal@94000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+ interrupts = <386 0x2 0 0>;
+ cell-index = <0x25>;
+ };
+ qportal38: qman-portal@98000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+ interrupts = <388 0x2 0 0>;
+ cell-index = <0x26>;
+ };
+ qportal39: qman-portal@9c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+ interrupts = <390 0x2 0 0>;
+ cell-index = <0x27>;
+ };
+ qportal40: qman-portal@a0000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+ interrupts = <392 0x2 0 0>;
+ cell-index = <0x28>;
+ };
+ qportal41: qman-portal@a4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+ interrupts = <394 0x2 0 0>;
+ cell-index = <0x29>;
+ };
+ qportal42: qman-portal@a8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+ interrupts = <396 0x2 0 0>;
+ cell-index = <0x2a>;
+ };
+ qportal43: qman-portal@ac000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+ interrupts = <398 0x2 0 0>;
+ cell-index = <0x2b>;
+ };
+ qportal44: qman-portal@b0000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+ interrupts = <400 0x2 0 0>;
+ cell-index = <0x2c>;
+ };
+ qportal45: qman-portal@b4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+ interrupts = <402 0x2 0 0>;
+ cell-index = <0x2d>;
+ };
+ qportal46: qman-portal@b8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+ interrupts = <404 0x2 0 0>;
+ cell-index = <0x2e>;
+ };
+ qportal47: qman-portal@bc000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+ interrupts = <406 0x2 0 0>;
+ cell-index = <0x2f>;
+ };
+ qportal48: qman-portal@c0000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+ interrupts = <408 0x2 0 0>;
+ cell-index = <0x30>;
+ };
+ qportal49: qman-portal@c4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+ interrupts = <410 0x2 0 0>;
+ cell-index = <0x31>;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
L2_1: l2-cache-controller@c20000 {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
+ qportals: qman-portals@ff000000 {
+ ranges = <0x0 0xf 0xff000000 0x200000>;
};
bportals: bman-portals@ff200000 {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
--- /dev/null
+/*
+ * T1023 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+ model = "fsl,T1023RDB";
+ compatible = "fsl,T1023RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 1 0 0xf 0xff800000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s";
+ reg = <0>;
+ spi-max-frequency = <10000000>; /* input clk */
+ };
+ };
+
+ i2c@118000 {
+ eeprom@50 {
+ compatible = "st,m24256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ interrupts = <0x5 0x1 0 0>;
+ };
+ };
+
+ i2c@118100 {
+ };
+ };
+
+ pci0: pcie@ffe240000 {
+ reg = <0xf 0xfe240000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe250000 {
+ reg = <0xf 0xfe250000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe260000 {
+ reg = <0xf 0xfe260000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "fsl/t1023si-post.dtsi"
--- /dev/null
+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+ model = "fsl,T1024QDS";
+ compatible = "fsl,T1024QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xff800000 0x00010000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+ reg = <3 0 0x300>;
+ ranges = <0 3 0 0x300>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11"; /* 16MB */
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25wf040"; /* 512KB */
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "eon,en25s64"; /* 8MB */
+ reg = <2>;
+ spi-max-frequency = <10000000>;
+ };
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ };
+
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ };
+ };
+
+ i2c@118000 {
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7461@4c {
+ /* Thermal Monitor */
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+ };
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x5 0x1 0 0>;
+ };
+ };
+ };
+
+ pci0: pcie@ffe240000 {
+ reg = <0xf 0xfe240000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe250000 {
+ reg = <0xf 0xfe250000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe260000 {
+ reg = <0xf 0xfe260000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "fsl/t1024si-post.dtsi"
--- /dev/null
+/*
+ * T1024 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+ model = "fsl,T1024RDB";
+ compatible = "fsl,T1024RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xff800000 0x00010000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ board-control@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,t1024-cpld";
+ reg = <3 0 0x300>;
+ ranges = <0 3 0 0x300>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q512ax3";
+ reg = <0>;
+ spi-max-frequency = <10000000>; /* input clk */
+ };
+
+ slic@1 {
+ compatible = "maxim,ds26522";
+ reg = <1>;
+ spi-max-frequency = <2000000>;
+ };
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ };
+ };
+
+ i2c@118000 {
+ adt7461@4c {
+ /* Thermal Monitor */
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ };
+
+ i2c@118100 {
+ pca9546@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ pci0: pcie@ffe240000 {
+ reg = <0xf 0xfe240000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe250000 {
+ reg = <0xf 0xfe250000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe260000 {
+ reg = <0xf 0xfe260000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "fsl/t1024si-post.dtsi"
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
ifc: localbus@ffe124000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
ifc: localbus@ffe124000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
ifc: localbus@ffe124000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
ifc: localbus@ffe124000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
};
dcsr: dcsr@f00000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
CONFIG_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1760=y
CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_USE_TB)
-#define CPU_FTRS_8XX (CPU_FTR_USE_TB)
+#define CPU_FTRS_8XX (CPU_FTR_USE_TB | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_440x6 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
#define MI_Ks 0x80000000 /* Should not be set */
#define MI_Kp 0x40000000 /* Should always be set */
+/*
+ * All pages' PP exec bits are set to 000, which means Execute for Supervisor
+ * and no Execute for User.
+ * Then we use the APG to say whether accesses are according to Page rules,
+ * "all Supervisor" rules (Exec for all) and "all User" rules (Exec for noone)
+ * Therefore, we define 4 APG groups. msb is _PAGE_EXEC, lsb is _PAGE_USER
+ * 0 (00) => Not User, no exec => 11 (all accesses performed as user)
+ * 1 (01) => User but no exec => 11 (all accesses performed as user)
+ * 2 (10) => Not User, exec => 01 (rights according to page definition)
+ * 3 (11) => User, exec => 00 (all accesses performed as supervisor)
+ */
+#define MI_APG_INIT 0xf4ffffff
+
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MI_RPN is written, bits in
* this register are used to create the TLB entry.
#define MD_Ks 0x80000000 /* Should not be set */
#define MD_Kp 0x40000000 /* Should always be set */
+/*
+ * All pages' PP data bits are set to either 000 or 011, which means
+ * respectively RW for Supervisor and no access for User, or RO for
+ * Supervisor and no access for user.
+ * Then we use the APG to say whether accesses are according to Page rules or
+ * "all Supervisor" rules (Access to all)
+ * Therefore, we define 2 APG groups. lsb is _PAGE_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor
+ * according to page definition)
+ */
+#define MD_APG_INIT 0x4fffffff
+
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MD_RPN is written, bits in
* this register are used to create the TLB entry.
} mm_context_t;
#endif /* !__ASSEMBLY__ */
+#if (PAGE_SHIFT == 12)
#define mmu_virtual_psize MMU_PAGE_4K
+#elif (PAGE_SHIFT == 14)
+#define mmu_virtual_psize MMU_PAGE_16K
+#else
+#error "Unsupported PAGE_SIZE"
+#endif
+
#define mmu_linear_psize MMU_PAGE_8M
#endif /* _ASM_POWERPC_MMU_8XX_H_ */
#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
-#ifdef CONFIG_PPC_8xx
- unsigned long tmp2;
-
- __asm__ __volatile__("\
-1: lwarx %0,0,%4\n\
- andc %1,%0,%5\n\
- or %1,%1,%6\n\
- /* 0x200 == Extended encoding, bit 22 */ \
- /* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
- rlwimi %1,%1,32-1,0x200\n /* get _PAGE_RO */ \
- rlwinm %3,%1,32-2,0x200\n /* get _PAGE_USER */ \
- andc %1,%1,%3\n\
- stwcx. %1,0,%4\n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2)
- : "r" (p), "r" (clr), "r" (set), "m" (*p)
- : "cc" );
-#else /* CONFIG_PPC_8xx */
__asm__ __volatile__("\
1: lwarx %0,0,%3\n\
andc %1,%0,%4\n\
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
-#endif /* CONFIG_PPC_8xx */
#else /* PTE_ATOMIC_UPDATES */
unsigned long old = pte_val(*p);
*p = __pte((old & ~clr) | set);
#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
#define _PAGE_DIRTY 0x0100 /* C: page changed */
-/* These 4 software bits must be masked out when the entry is loaded
- * into the TLB, 1 SW bit left(0x0080).
+/* These 4 software bits must be masked out when the L2 entry is loaded
+ * into the TLB.
*/
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_ACCESSED 0x0020 /* software: page referenced */
-#define _PAGE_WRITETHRU 0x0040 /* software: caching is write through */
+#define _PAGE_GUARDED 0x0010 /* Copied to L1 G entry in DTLB */
+#define _PAGE_USER 0x0020 /* Copied to L1 APG lsb */
+#define _PAGE_EXEC 0x0040 /* Copied to L1 APG */
+#define _PAGE_WRITETHRU 0x0080 /* software: caching is write through */
+#define _PAGE_ACCESSED 0x0800 /* software: page referenced */
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_RO 0x0400 /* lsb PP bits */
-#define _PAGE_USER 0x0800 /* msb PP bits */
-/* set when _PAGE_USER is unset and _PAGE_RO is set */
-#define _PAGE_KNLRO 0x0200
+#define _PAGE_RO 0x0600 /* Supervisor RO, User no access */
#define _PMD_PRESENT 0x0001
#define _PMD_BAD 0x0ff0
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-#define _PTE_NONE_MASK _PAGE_KNLRO
-
/* Until my rework is finished, 8xx still needs atomic PTE updates */
#define PTE_ATOMIC_UPDATES 1
/* We need to add _PAGE_SHARED to kernel pages */
-#define _PAGE_KERNEL_RO (_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO)
-#define _PAGE_KERNEL_ROX (_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO)
+#define _PAGE_KERNEL_RO (_PAGE_SHARED | _PAGE_RO)
+#define _PAGE_KERNEL_ROX (_PAGE_SHARED | _PAGE_RO | _PAGE_EXEC)
+#define _PAGE_KERNEL_RW (_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
+ _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RWX (_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
+ _PAGE_HWWRITE | _PAGE_EXEC)
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PTE_8xx_H */
mtspr spr, reg
#endif
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000
+#define IS_KERNEL(tmp, addr) \
+ andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label) beq label
+#else
+#define IS_KERNEL(tmp, addr) \
+ rlwinm tmp, addr, 16, 16, 31; \
+ cmpli cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label) blt label
+#endif
+
+
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
*/
#define EXCEPTION_PROLOG \
EXCEPTION_PROLOG_0; \
+ mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
#define EXCEPTION_PROLOG_0 \
mtspr SPRN_SPRG_SCRATCH0,r10; \
- mtspr SPRN_SPRG_SCRATCH1,r11; \
- mfcr r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
#define EXCEPTION_PROLOG_1 \
mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
* Exception exit code.
*/
#define EXCEPTION_EPILOG_0 \
- mtcr r10; \
mfspr r10,SPRN_SPRG_SCRATCH0; \
mfspr r11,SPRN_SPRG_SCRATCH1
* We have to use the MD_xxx registers for the tablewalk because the
* equivalent MI_xxx registers only perform the attribute functions.
*/
+
+#ifdef CONFIG_8xx_CPU15
+#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr) \
+ addi tmp, addr, PAGE_SIZE; \
+ tlbie tmp; \
+ addi tmp, addr, -PAGE_SIZE; \
+ tlbie tmp
+#else
+#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)
+#endif
+
InstructionTLBMiss:
#ifdef CONFIG_8xx_CPU6
- mtspr SPRN_DAR, r3
+ mtspr SPRN_SPRG_SCRATCH2, r3
#endif
EXCEPTION_PROLOG_0
- mtspr SPRN_SPRG_SCRATCH2, r10
- mfspr r10, SPRN_SRR0 /* Get effective address of fault */
-#ifdef CONFIG_8xx_CPU15
- addi r11, r10, PAGE_SIZE
- tlbie r11
- addi r11, r10, -PAGE_SIZE
- tlbie r11
-#endif
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
#ifdef CONFIG_MODULES
/* Only modules will cause ITLB Misses as we always
* pin the first 8MB of kernel memory */
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
-#endif
+ mfspr r11, SPRN_SRR0 /* Get effective address of fault */
+ INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11)
+ mfcr r10
+ IS_KERNEL(r11, r11)
mfspr r11, SPRN_M_TW /* Get level 1 table */
-#ifdef CONFIG_MODULES
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
+ mtcr r10
+ mfspr r10, SPRN_SRR0 /* Get effective address of fault */
+#else
+ mfspr r10, SPRN_SRR0 /* Get effective address of fault */
+ INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10)
+ mfspr r11, SPRN_M_TW /* Get level 1 table base address */
#endif
/* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
- /* Load the MI_TWC with the attributes for this "segment." */
- MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
- rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */
/* Extract level 2 index */
rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
- lwzx r10, r10, r11 /* Get the pte */
+ rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */
+ lwz r10, 0(r10) /* Get the pte */
+
+ /* Insert the APG into the TWC from the Linux PTE. */
+ rlwimi r11, r10, 0, 25, 26
+ /* Load the MI_TWC with the attributes for this "segment." */
+ MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
#ifdef CONFIG_SWAP
rlwinm r11, r10, 32-5, _PAGE_PRESENT
#endif
li r11, RPN_PATTERN
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21 and 28 must be clear.
+ * Software indicator bits 20-23 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
- rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */
+ rlwimi r10, r11, 0, 0x0ff8 /* Set 24-27, clear 20-23,28 */
MTSPR_CPU6(SPRN_MI_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */
#ifdef CONFIG_8xx_CPU6
- mfspr r3, SPRN_DAR
- mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r3, SPRN_SPRG_SCRATCH2
#endif
- mfspr r10, SPRN_SPRG_SCRATCH2
EXCEPTION_EPILOG_0
rfi
. = 0x1200
DataStoreTLBMiss:
#ifdef CONFIG_8xx_CPU6
- mtspr SPRN_DAR, r3
+ mtspr SPRN_SPRG_SCRATCH2, r3
#endif
EXCEPTION_PROLOG_0
- mtspr SPRN_SPRG_SCRATCH2, r10
- mfspr r10, SPRN_MD_EPN
+ mfcr r10
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
+ mfspr r11, SPRN_MD_EPN
+ IS_KERNEL(r11, r11)
mfspr r11, SPRN_M_TW /* Get level 1 table */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
+ mtcr r10
+ mfspr r10, SPRN_MD_EPN
+
/* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */
lwz r10, 0(r10) /* Get the pte */
- /* Insert the Guarded flag into the TWC from the Linux PTE.
- * It is bit 27 of both the Linux PTE and the TWC (at least
+ /* Insert the Guarded flag and APG into the TWC from the Linux PTE.
+ * It is bit 26-27 of both the Linux PTE and the TWC (at least
* I got that right :-). It will be better when we can put
* this into the Linux pgd/pmd and load it in the operation
* above.
*/
- rlwimi r11, r10, 0, 27, 27
+ rlwimi r11, r10, 0, 26, 27
/* Insert the WriteThru flag into the TWC from the Linux PTE.
* It is bit 25 in the Linux PTE and bit 30 in the TWC
*/
*/
li r11, RPN_PATTERN
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
+ rlwimi r10, r11, 0, 20, 20 /* clear 20 */
MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */
#ifdef CONFIG_8xx_CPU6
- mfspr r3, SPRN_DAR
+ mfspr r3, SPRN_SPRG_SCRATCH2
#endif
mtspr SPRN_DAR, r11 /* Tag DAR */
- mfspr r10, SPRN_SPRG_SCRATCH2
EXCEPTION_EPILOG_0
rfi
. = 0x1400
DataTLBError:
EXCEPTION_PROLOG_0
+ mfcr r10
mfspr r11, SPRN_DAR
cmpwi cr0, r11, RPN_PATTERN
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
ori r8, r8, MI_EVALID /* Mark it valid */
mtspr SPRN_MI_EPN, r8
mtspr SPRN_MD_EPN, r8
- li r8, MI_PS8MEG /* Set 8M byte page */
+ li r8, MI_PS8MEG | (2 << 5) /* Set 8M byte page, APG 2 */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MI_TWC, r8
+ li r8, MI_PS8MEG /* Set 8M byte page, APG 0 */
+ ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8
li r8, MI_BOOTINIT /* Create RPN for address 0 */
mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
mtspr SPRN_MD_RPN, r8
- lis r8, MI_Kp@h /* Set the protection mode */
+ lis r8, MI_APG_INIT@h /* Set protection modes */
+ ori r8, r8, MI_APG_INIT@l
mtspr SPRN_MI_AP, r8
+ lis r8, MD_APG_INIT@h
+ ori r8, r8, MD_APG_INIT@l
mtspr SPRN_MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor
mtlr r0
lis r3,HID0_NAP@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-BEGIN_FTR_SECTION
- msync
- li r7,L2CSR0_L2FL@l
- mtspr SPRN_L2CSR0,r7
-2:
- mfspr r7,SPRN_L2CSR0
- andi. r4,r7,L2CSR0_L2FL@l
- bne 2b
-END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
1:
/* Go to NAP or DOZE now */
mfspr r4,SPRN_HID0
*/
int devmem_is_allowed(unsigned long pfn)
{
- if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+ if (iomem_is_exclusive(PFN_PHYS(pfn)))
return 0;
if (!page_is_ram(pfn))
return 1;
rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpdi cr0,r14,0
- bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */
+ bge tlb_miss_huge_e6500 /* Bad pgd entry or hugepage; bail */
ldx r14,r14,r15 /* grab pud entry */
rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpdi cr0,r14,0
- bge tlb_miss_fault_e6500
+ bge tlb_miss_huge_e6500
ldx r14,r14,r15 /* Grab pmd entry */
mfspr r10,SPRN_MAS0
cmpdi cr0,r14,0
- bge tlb_miss_fault_e6500
+ bge tlb_miss_huge_e6500
/* Now we build the MAS for a 2M indirect page:
*
clrrdi r15,r16,21 /* make EA 2M-aligned */
mtspr SPRN_MAS2,r15
+tlb_miss_huge_done_e6500:
lbz r15,TCD_ESEL_NEXT(r11)
lbz r16,TCD_ESEL_MAX(r11)
lbz r14,TCD_ESEL_FIRST(r11)
tlb_epilog_bolted
rfi
+tlb_miss_huge_e6500:
+ beq tlb_miss_fault_e6500
+ li r10,1
+ andi. r15,r14,HUGEPD_SHIFT_MASK@l /* r15 = psize */
+ rldimi r14,r10,63,0 /* Set PD_HUGE */
+ xor r14,r14,r15 /* Clear size bits */
+ ldx r14,0,r14
+
+ /*
+ * Now we build the MAS for a huge page.
+ *
+ * MAS 0 : ESEL needs to be filled by software round-robin
+ * - can be handled by indirect code
+ * MAS 1 : Need to clear IND and set TSIZE
+ * MAS 2,3+7: Needs to be redone similar to non-tablewalk handler
+ */
+
+ subi r15,r15,10 /* Convert psize to tsize */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,~MAS1_IND
+ rlwimi r10,r15,MAS1_TSIZE_SHIFT,MAS1_TSIZE_MASK
+ mtspr SPRN_MAS1,r10
+
+ li r10,-0x400
+ sld r15,r10,r15 /* Generate mask based on size */
+ and r10,r16,r15
+ rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ rlwimi r10,r14,32-19,27,31 /* Insert WIMGE */
+ clrldi r15,r15,PAGE_SHIFT /* Clear crap at the top */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ mtspr SPRN_MAS2,r10
+ andi. r10,r14,_PAGE_DIRTY
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ bne 1f
+ li r10,MAS3_SW|MAS3_UW
+ andc r15,r15,r10
+1:
+ mtspr SPRN_MAS7_MAS3,r15
+
+ mfspr r10,SPRN_MAS0
+ b tlb_miss_huge_done_e6500
+
tlb_miss_kernel_e6500:
ld r14,PACA_KERNELPGD(r13)
cmpldi cr1,r15,8 /* Check for vmalloc region */
For 64bit kernel, the following boards are supported:
T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
The following boards are supported for both 32bit and 64bit kernel:
- P5020 DS, P5040 DS and T104xQDS/RDB
+ P5020 DS, P5040 DS, T102x QDS/RDB, T104x QDS/RDB
endif # FSL_SOC_BOOKE
"fsl,B4860QDS",
"fsl,B4420QDS",
"fsl,B4220QDS",
+ "fsl,T1023RDB",
+ "fsl,T1024QDS",
+ "fsl,T1024RDB",
"fsl,T1040QDS",
"fsl,T1042QDS",
"fsl,T1040RDB",
local_irq_disable();
if (secondary) {
+ __flush_disable_L1();
atomic_inc(&kexec_down_cpus);
/* loop forever */
while (1);
ppc_md.kexec_cpu_down(0,1);
}
-static void map_and_flush(unsigned long paddr)
-{
- struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
- unsigned long kaddr = (unsigned long)kmap_atomic(page);
-
- flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
- kunmap_atomic((void *)kaddr);
-}
-
-/**
- * Before we reset the other cores, we need to flush relevant cache
- * out to memory so we don't get anything corrupted, some of these flushes
- * are performed out of an overabundance of caution as interrupts are not
- * disabled yet and we can switch cores
- */
-static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image)
-{
- kimage_entry_t *ptr, entry;
- unsigned long paddr;
- int i;
-
- if (image->type == KEXEC_TYPE_DEFAULT) {
- /* normal kexec images are stored in temporary pages */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (entry & IND_INDIRECTION) ?
- phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
- if (!(entry & IND_DESTINATION)) {
- map_and_flush(entry);
- }
- }
- /* flush out last IND_DONE page */
- map_and_flush(entry);
- } else {
- /* crash type kexec images are copied to the crash region */
- for (i = 0; i < image->nr_segments; i++) {
- struct kexec_segment *seg = &image->segment[i];
- for (paddr = seg->mem; paddr < seg->mem + seg->memsz;
- paddr += PAGE_SIZE) {
- map_and_flush(paddr);
- }
- }
- }
-
- /* also flush the kimage struct to be passed in as well */
- flush_dcache_range((unsigned long)image,
- (unsigned long)image + sizeof(*image));
-}
-
static void mpc85xx_smp_machine_kexec(struct kimage *image)
{
int timeout = INT_MAX;
int i, num_cpus = num_present_cpus();
- mpc85xx_smp_flush_dcache_kexec(image);
-
if (image->type == KEXEC_TYPE_DEFAULT)
smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
mpc85xx_qe_init();
mpc85xx_qe_par_io_init();
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+#if IS_ENABLED(CONFIG_UCC_GETH) || IS_ENABLED(CONFIG_SERIAL_QE)
if (machine_is(twr_p1025)) {
struct ccsr_guts __iomem *guts;
MPC85xx_PMUXCR_QE(12));
iounmap(guts);
-#if defined(CONFIG_SERIAL_QE)
+#if IS_ENABLED(CONFIG_SERIAL_QE)
/* On P1025TWR board, the UCC7 acted as UART port.
* However, The UCC7's CTS pin is low level in default,
* it will impact the transmission in full duplex
projects / deliverable / linux.git / commitdiff
