# Object file lists.
obj-y := mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
--- /dev/null
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+ u32 min_pre, temp_pre, old_err, err;
+
+ if (div >= 512) {
+ *pre = 8;
+ *post = 64;
+ } else if (div >= 64) {
+ min_pre = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+ err = div % temp_pre;
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+ err = temp_pre - err;
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+ *post = (div + *pre - 1) / *pre;
+ } else if (div <= 8) {
+ *pre = div;
+ *post = 1;
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+
+static struct clk mcu_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+
+static int cgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ if (!clk->enable_reg)
+ return 0;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 3 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void cgr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ if (!clk->enable_reg)
+ return;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+
+ /* special case for EMI clock */
+ if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+ reg |= (1 << clk->enable_shift);
+
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long pll_ref_get_rate(void)
+{
+ unsigned long ccmr;
+ unsigned int prcs;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+ prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+ if (prcs == 0x1)
+ return CKIL_CLK_FREQ * 1024;
+ else
+ return clk_get_rate(&ckih_clk);
+}
+
+static unsigned long usb_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_UPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_SRPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long mcu_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg, ccmr;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+
+ if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+ return clk_get_rate(&ckih_clk);
+
+ reg = __raw_readl(MXC_CCM_MPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static int usb_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void usb_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int serial_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void serial_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long mcu_main_get_rate(struct clk *clk)
+{
+ u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+ if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+ return clk_get_rate(&serial_pll_clk);
+ else
+ return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long ahb_get_rate(struct clk *clk)
+{
+ unsigned long max_pdf;
+
+ max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+ MXC_CCM_PDR0_MAX_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long ipg_get_rate(struct clk *clk)
+{
+ unsigned long ipg_pdf;
+
+ ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+ MXC_CCM_PDR0_IPG_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long nfc_get_rate(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+
+ nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+ MXC_CCM_PDR0_NFC_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long hsp_get_rate(struct clk *clk)
+{
+ unsigned long hsp_pdf;
+
+ hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+ MXC_CCM_PDR0_HSP_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long usb_get_rate(struct clk *clk)
+{
+ unsigned long usb_pdf, usb_prepdf;
+
+ usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+ MXC_CCM_PDR1_USB_PODF_OFFSET);
+ usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+ MXC_CCM_PDR1_USB_PRDF_OFFSET);
+ return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long csi_get_rate(struct clk *clk)
+{
+ u32 reg, pre, post;
+
+ reg = __raw_readl(MXC_CCM_PDR0);
+ pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+ MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ pre++;
+ post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+ MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ post++;
+ return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post, parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+}
+
+static int csi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set CSI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR0) &
+ ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+ reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR0);
+
+ return 0;
+}
+
+static unsigned long ssi1_get_rate(struct clk *clk)
+{
+ unsigned long ssi1_pdf, ssi1_prepdf;
+
+ ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+ ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long ssi2_get_rate(struct clk *clk)
+{
+ unsigned long ssi2_pdf, ssi2_prepdf;
+
+ ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+ ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long firi_get_rate(struct clk *clk)
+{
+ unsigned long firi_pdf, firi_prepdf;
+
+ firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+ firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post;
+ u32 parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+
+}
+
+static int firi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set FIRI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR1) &
+ ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+ reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+ reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR1);
+
+ return 0;
+}
+
+static unsigned long mbx_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long mstick1_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+ MXC_CCM_PDR2_MST1_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long mstick2_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+ MXC_CCM_PDR2_MST2_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+ return ckih_rate;
+}
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
+static struct clk ckih_clk = {
+ .get_rate = clk_ckih_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = mcu_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+ .parent = &mcu_pll_clk,
+ .get_rate = mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = serial_pll_get_rate,
+ .enable = serial_pll_enable,
+ .disable = serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = usb_pll_get_rate,
+ .enable = usb_pll_enable,
+ .disable = usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+ .parent = &mcu_main_clk,
+ .get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = getsetround##_get_rate, \
+ .set_rate = getsetround##_set_rate, \
+ .round_rate = getsetround##_round_rate, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK(NULL, "firi", firi_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "rng", rng_clk)
+ _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+ _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+ _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+ _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+ _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+ u32 reg;
+ int i;
+
+ ckih_rate = fref;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* change the csi_clk parent if necessary */
+ reg = __raw_readl(MXC_CCM_CCMR);
+ if (!(reg & MXC_CCM_CCMR_CSCS))
+ if (clk_set_parent(&csi_clk, &usb_pll_clk))
+ pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
+ /* Turn off all possible clocks */
+ __raw_writel((3 << 4), MXC_CCM_CGR0);
+ __raw_writel(0, MXC_CCM_CGR1);
+ __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
+ 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+ MX32, but still required to be set */
+ MXC_CCM_CGR2);
+
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
+ usb_pll_disable(&usb_pll_clk);
+
+ pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+ clk_enable(&gpt_clk);
+ clk_enable(&emi_clk);
+ clk_enable(&iim_clk);
+
+ clk_enable(&serial_pll_clk);
+
+ mx31_read_cpu_rev();
+
+ if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+ reg = __raw_readl(MXC_CCM_PMCR1);
+ /* No PLL restart on DVFS switch; enable auto EMI handshake */
+ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+ __raw_writel(reg, MXC_CCM_PMCR1);
+ }
+
+ mxc_timer_init(&ipg_clk, IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
+
+ return 0;
+}
+
+++ /dev/null
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crm_regs.h"
-
-#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- min_pre = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = (div + *pre - 1) / *pre;
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
-
- /* special case for EMI clock */
- if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
- reg |= (1 << clk->enable_shift);
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
- unsigned long ccmr;
- unsigned int prcs;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
- prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
- if (prcs == 0x1)
- return CKIL_CLK_FREQ * 1024;
- else
- return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_UPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_SRPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
- unsigned long reg, ccmr;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
-
- if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
- return clk_get_rate(&ckih_clk);
-
- reg = __raw_readl(MXC_CCM_MPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
- u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
- if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
- return clk_get_rate(&serial_pll_clk);
- else
- return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
- unsigned long max_pdf;
-
- max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
- MXC_CCM_PDR0_MAX_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
- unsigned long ipg_pdf;
-
- ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
- MXC_CCM_PDR0_IPG_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
- unsigned long nfc_pdf;
-
- nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
- MXC_CCM_PDR0_NFC_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
- unsigned long hsp_pdf;
-
- hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
- MXC_CCM_PDR0_HSP_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
- unsigned long usb_pdf, usb_prepdf;
-
- usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
- MXC_CCM_PDR1_USB_PODF_OFFSET);
- usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
- MXC_CCM_PDR1_USB_PRDF_OFFSET);
- return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
- u32 reg, pre, post;
-
- reg = __raw_readl(MXC_CCM_PDR0);
- pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
- MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- pre++;
- post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
- MXC_CCM_PDR0_CSI_PODF_OFFSET;
- post++;
- return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post, parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set CSI clock divider */
- reg = __raw_readl(MXC_CCM_PDR0) &
- ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
- reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
- reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR0);
-
- return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
- unsigned long ssi1_pdf, ssi1_prepdf;
-
- ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PODF_OFFSET);
- ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
- unsigned long ssi2_pdf, ssi2_prepdf;
-
- ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PODF_OFFSET);
- ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
- unsigned long firi_pdf, firi_prepdf;
-
- firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PODF_OFFSET);
- firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post;
- u32 parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set FIRI clock divider */
- reg = __raw_readl(MXC_CCM_PDR1) &
- ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
- reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
- reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR1);
-
- return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
- MXC_CCM_PDR2_MST1_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
- MXC_CCM_PDR2_MST2_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
- .parent = &mcu_pll_clk,
- .get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = serial_pll_get_rate,
- .enable = serial_pll_enable,
- .disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = usb_pll_get_rate,
- .enable = usb_pll_enable,
- .disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
- .parent = &mcu_main_clk,
- .get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = getsetround##_get_rate, \
- .set_rate = getsetround##_set_rate, \
- .round_rate = getsetround##_round_rate, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "epit", epit1_clk)
- _REGISTER_CLOCK(NULL, "epit", epit2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
- _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
- _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
- _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
- _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
- u32 reg;
- int i;
-
- ckih_rate = fref;
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
-
- /* change the csi_clk parent if necessary */
- reg = __raw_readl(MXC_CCM_CCMR);
- if (!(reg & MXC_CCM_CCMR_CSCS))
- if (clk_set_parent(&csi_clk, &usb_pll_clk))
- pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
- /* Turn off all possible clocks */
- __raw_writel((3 << 4), MXC_CCM_CGR0);
- __raw_writel(0, MXC_CCM_CGR1);
- __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
- 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
- MX32, but still required to be set */
- MXC_CCM_CGR2);
-
- /*
- * Before turning off usb_pll make sure ipg_per_clk is generated
- * by ipg_clk and not usb_pll.
- */
- __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
- usb_pll_disable(&usb_pll_clk);
-
- pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
- clk_enable(&gpt_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
-
- clk_enable(&serial_pll_clk);
-
- mx31_read_cpu_rev();
-
- if (mx31_revision() >= MX31_CHIP_REV_2_0) {
- reg = __raw_readl(MXC_CCM_PMCR1);
- /* No PLL restart on DVFS switch; enable auto EMI handshake */
- reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
- __raw_writel(reg, MXC_CCM_PMCR1);
- }
-
- mxc_timer_init(&ipg_clk, IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
-
- return 0;
-}
-
--- /dev/null
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
+#define IOMUXGPR (IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+ u32 field, l, mode, ret = 0;
+ void __iomem *reg;
+
+ reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+ field = pin_mode & 0x3;
+ mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0xff << (field * 8));
+ l |= mode << (field * 8);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+ u32 field, l;
+ void __iomem *reg;
+
+ pin &= IOMUX_PADNUM_MASK;
+ reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+ field = (pin + 2) % 3;
+
+ pr_debug("%s: reg offset = 0x%x, field = %d\n",
+ __func__, (pin + 2) / 3, field);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0x1ff << (field * 10));
+ l |= config << (field * 10);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EBUSY;
+ }
+ mxc_iomux_mode(pin);
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+ u32 l;
+
+ spin_lock(&gpio_mux_lock);
+ l = __raw_readl(IOMUXGPR);
+ if (en)
+ l |= gp;
+ else
+ l &= ~gp;
+
+ __raw_writel(l, IOMUXGPR);
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
+++ /dev/null
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mx3.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
-#define IOMUXGPR (IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 field, l, mode, ret = 0;
- void __iomem *reg;
-
- reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
- field = pin_mode & 0x3;
- mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 field, l;
- void __iomem *reg;
-
- pin &= IOMUX_PADNUM_MASK;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin);
-
- return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
- const char *label)
-{
- unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(const unsigned int pin)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
-{
- unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
- u32 l;
-
- spin_lock(&gpio_mux_lock);
- l = __raw_readl(IOMUXGPR);
- if (en)
- l |= gp;
- else
- l &= ~gp;
-
- __raw_writel(l, IOMUXGPR);
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
projects / deliverable / linux.git / commitdiff
