* trad-core.c: Pass the u.u_ar0 value as the negative of the
authorJohn Gilmore <gnu@cygnus>
Wed, 16 Oct 1991 18:56:07 +0000 (18:56 +0000)
committerJohn Gilmore <gnu@cygnus>
Wed, 16 Oct 1991 18:56:07 +0000 (18:56 +0000)
virtual-memory-address of the .reg section.  We can't just make a
section for "all the regs and nothing else" because only GDB knows
exactly where the regs are (scattered around the upage and stack).
Clean up memory allocation.  Remove big- and little-endian
vectors, replace with single vector; this only runs on the host,
in host byte order.  Replace byteswap routines with aborts in case
anyone calls them.
* targets.c:  There's only one trad_core_vec now.
* aoutf1.h (sunos_core_file_p):  VMA of .reg* now needs to be 0.

bfd/trad-core.c

index 74426668b2b43535c0d1e1f52446d6854a70874e..cd64383f07b6441f3952eab1b187ee2dafc8f0b8 100644 (file)
@@ -21,17 +21,17 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 /* To use this file on a particular host, configure the host with these
    parameters in the config/h-HOST file:
 
-       HDEFINES=-DHOST_SYS=WHATEVER_SYS -DTRAD_CORE
+       HDEFINES=-DTRAD_CORE
        HDEPFILES=trad-core.o
 
  */
 
-#include <sysdep.h>
 #include "bfd.h"
-#include <stdio.h>
+#include "sysdep.h"
 #include "libbfd.h"
 #include "libaout.h"           /* BFD a.out internal data structures */
 
+#include <stdio.h>
 #include <sys/types.h>
 #include <sys/param.h>
 #include <sys/dir.h>
@@ -57,20 +57,22 @@ struct core_data {
 #define core_stacksec(bfd) (((struct core_data*)((bfd)->tdata))->stack_section)
 #define core_regsec(bfd) (((struct core_data *) ((bfd)->tdata))->reg_section)
 
+/* Handle 4.2-style (and perhaps also sysV-style) core dump file.  */
+
 /* ARGSUSED */
 bfd_target *
 trad_unix_core_file_p (abfd)
      bfd *abfd;
 {
-#if HOST_SYS == SUN4_SYS
-  return 0;
-#else
   int val;
-  char *rawptr;
   struct user u;
   unsigned int reg_offset, fp_reg_offset;
-
-  /* 4.2-style (and perhaps also sysV-style) core dump file.  */
+  /* This struct is just for allocating two things with one zalloc, so
+     they will be freed together, without violating alignment constraints. */
+  struct core_user {
+       struct core_data        coredata;
+       struct user             u;
+  } *rawptr;
 
   val = bfd_read ((void *)&u, 1, sizeof u, abfd);
   if (val != sizeof u)
@@ -87,18 +89,18 @@ trad_unix_core_file_p (abfd)
 
   /* Allocate both the upage and the struct core_data at once, so
      a single free() will free them both.  */
-  rawptr = (char *)zalloc (sizeof (u) + sizeof (struct core_data));
+  rawptr = (struct core_user *)bfd_zalloc (abfd, sizeof (struct core_user));
   if (rawptr == NULL) {
     bfd_error = no_memory;
     return 0;
   }
   
-  set_tdata (abfd, (struct core_data *)rawptr);
-  core_upage (abfd) = (struct user *)(rawptr + sizeof (struct core_data));
+  set_tdata (abfd, &rawptr->coredata);
+  core_upage (abfd) = &rawptr->u;
   *core_upage (abfd) = u;              /* Save that upage! */
 
-  /* create the sections.  This is raunchy, but bfd_close wants to reclaim
-     them */
+  /* Create the sections.  This is raunchy, but bfd_close wants to free
+     them separately.  */
   core_stacksec (abfd) = (asection *) zalloc (sizeof (asection));
   if (core_stacksec (abfd) == NULL) {
 loser:
@@ -139,7 +141,21 @@ loser2:
   core_datasec (abfd)->vma = HOST_TEXT_START_ADDR + (NBPG * u.u_tsize);
 #endif
   core_stacksec (abfd)->vma = HOST_STACK_END_ADDR - (NBPG * u.u_ssize);
-  core_regsec (abfd)->vma = -1;
+  /* This is tricky.  As the "register section", we give them the entire
+     upage and stack.  u.u_ar0 points to where "register 0" is stored.
+     There are two tricks with this, though.  One is that the rest of the
+     registers might be at positive or negative (or both) displacements
+     from *u_ar0.  The other is that u_ar0 is sometimes an absolute address
+     in kernel memory, and on other systems it is an offset from the beginning
+     of the `struct user'.
+
+     As a practical matter, we don't know where the registers actually are,
+     so we have to pass the whole area to GDB.  We encode the value of u_ar0
+     by setting the .regs section up so that its virtual memory address
+     0 is at the place pointed to by u_ar0 (by setting the vma of the start
+     of the section to -u_ar0).  GDB uses this info to locate the regs,
+     using minor trickery to get around the offset-or-absolute-addr problem. */
+  core_regsec (abfd)->vma = 0 - (int) u.u_ar0;
 
   core_datasec (abfd)->filepos = NBPG * UPAGES;
   core_stacksec (abfd)->filepos = (NBPG * UPAGES) + NBPG * u.u_dsize;
@@ -156,7 +172,6 @@ loser2:
   abfd->section_count = 3;
 
   return abfd->xvec;
-#endif
 }
 
 char *
@@ -231,10 +246,18 @@ trad_unix_core_file_matches_executable_p  (core_bfd, exec_bfd)
 #define trad_unix_bfd_debug_info_accumulate    (PROTO (void, (*),      \
        (bfd *, struct sec *))) bfd_void
 
+/* If somebody calls any byte-swapping routines, shoot them.  */
+void
+swap_abort()
+{
+  abort(); /* This way doesn't require any declaration for ANSI to fuck up */
+}
+#define        NO_GET  ((PROTO(bfd_vma, (*), (         bfd_byte *))) swap_abort )
+#define        NO_PUT  ((PROTO(void,    (*), (bfd_vma, bfd_byte *))) swap_abort )
 
-bfd_target trad_core_big_vec =
+bfd_target trad_core_vec =
   {
-    "trad-core-big",
+    "trad-core",
     bfd_target_unknown_flavour,
     true,                      /* target byte order */
     true,                      /* target headers byte order */
@@ -245,41 +268,15 @@ bfd_target trad_core_big_vec =
     ' ',                                                  /* ar_pad_char */
     16,                                                           /* ar_max_namelen */
     3,                                                    /* minimum alignment power */
-    _do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* data */
-    _do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* hdrs */
-
-      {_bfd_dummy_target, _bfd_dummy_target,
-       _bfd_dummy_target, trad_unix_core_file_p},
-      {bfd_false, bfd_false,   /* bfd_create_object */
-       bfd_false, bfd_false},
-      {bfd_false, bfd_false,   /* bfd_write_contents */
-       bfd_false, bfd_false},
+    NO_GET, NO_PUT, NO_GET, NO_PUT, NO_GET, NO_PUT, /* data */
+    NO_GET, NO_PUT, NO_GET, NO_PUT, NO_GET, NO_PUT, /* hdrs */
+
+    {_bfd_dummy_target, _bfd_dummy_target,
+     _bfd_dummy_target, trad_unix_core_file_p},
+    {bfd_false, bfd_false,     /* bfd_create_object */
+     bfd_false, bfd_false},
+    {bfd_false, bfd_false,     /* bfd_write_contents */
+     bfd_false, bfd_false},
     
     JUMP_TABLE(trad_unix)
 };
-
-bfd_target trad_core_little_vec =
-{
-  "trad-core-little",
-  bfd_target_unknown_flavour,
-  false,                       /* target byte order */
-  false,                       /* target headers byte order */
-  (HAS_RELOC | EXEC_P |        /* object flags */
-   HAS_LINENO | HAS_DEBUG |
-   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-  ' ',                         /* ar_pad_char */
-  16,                          /* ar_max_namelen */
-  3,                           /* minimum alignment power */
-  _do_getl64, _do_putl64, _do_getl32, _do_putl32, _do_getl16, _do_putb16,
-  _do_getl64, _do_putl64, _do_getl32, _do_putl32, _do_getl16, _do_putl16,
-  
-  {_bfd_dummy_target, _bfd_dummy_target,
-   _bfd_dummy_target, trad_unix_core_file_p},
-  {bfd_false, bfd_false,       /* bfd_create_object */
-   bfd_false, bfd_false},
-  {bfd_false, bfd_false,       /* bfd_write_contents */
-   bfd_false, bfd_false},
-  
-  JUMP_TABLE(trad_unix)
-};
This page took 0.028554 seconds and 4 git commands to generate.