ARM: at91/dt: at91sam9n12: use slow clock where necessary

The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.
The LCD PWM will be handled later.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 5c2a8c8c8bd4853ebd49196fb5c8cb6a28bce6b8..345186f91422d271d8d651f5e353052cb46ac387 100644 (file)
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -376,6 +376,7 @@
                        rstc@fffffe00 {
                                compatible = "atmel,at91sam9g45-rstc";
                                reg = <0xfffffe00 0x10>;
+                               clocks = <&clk32k>;
                        };
 
                        pit: timer@fffffe30 {
@@ -388,6 +389,7 @@
                        shdwc@fffffe10 {
                                compatible = "atmel,at91sam9x5-shdwc";
                                reg = <0xfffffe10 0x10>;
+                               clocks = <&clk32k>;
                        };
 
                        sckc@fffffe50 {
@@ -431,16 +433,16 @@
                                compatible = "atmel,at91sam9x5-tcb";
                                reg = <0xf8008000 0x100>;
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&tcb_clk>;
-                               clock-names = "t0_clk";
+                               clocks = <&tcb_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "slow_clk";
                        };
 
                        tcb1: timer@f800c000 {
                                compatible = "atmel,at91sam9x5-tcb";
                                reg = <0xf800c000 0x100>;
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&tcb_clk>;
-                               clock-names = "t0_clk";
+                               clocks = <&tcb_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "slow_clk";
                        };
 
                        dma: dma-controller@ffffec00 {
@@ -891,6 +893,7 @@
                                compatible = "atmel,at91sam9260-wdt";
                                reg = <0xfffffe40 0x10>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
                                atmel,watchdog-type = "hardware";
                                atmel,reset-type = "all";
                                atmel,dbg-halt;
@@ -901,6 +904,7 @@
                                compatible = "atmel,at91rm9200-rtc";
                                reg = <0xfffffeb0 0x40>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
                                status = "disabled";
                        };