{
struct em28xx *dev = *devhandle;
int retval;
- int errCode;
dev->udev = udev;
mutex_init(&dev->ctrl_urb_lock);
}
if (dev->is_audio_only) {
- errCode = em28xx_audio_setup(dev);
- if (errCode)
+ retval = em28xx_audio_setup(dev);
+ if (retval)
return -ENODEV;
em28xx_add_into_devlist(dev);
em28xx_init_extension(dev);
/* Resets I2C speed */
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req failed!"
+ em28xx_errdev("%s: em28xx_write_reg failed!"
" retval [%d]\n",
__func__, retval);
return retval;
}
/* register i2c bus */
- errCode = em28xx_i2c_register(dev);
- if (errCode < 0) {
- v4l2_device_unregister(&dev->v4l2_dev);
- em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_i2c_register(dev);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
+ __func__, retval);
+ goto unregister_dev;
}
/*
em28xx_card_setup(dev);
/* Configure audio */
- errCode = em28xx_audio_setup(dev);
- if (errCode < 0) {
- v4l2_device_unregister(&dev->v4l2_dev);
- em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
- __func__, errCode);
+ retval = em28xx_audio_setup(dev);
+ if (retval < 0) {
+ em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
+ __func__, retval);
+ goto fail;
}
/* wake i2c devices */
if (dev->board.has_msp34xx) {
/* Send a reset to other chips via gpio */
- errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
- if (errCode < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req - "
- "msp34xx(1) failed! errCode [%d]\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - "
+ "msp34xx(1) failed! error [%d]\n",
+ __func__, retval);
+ goto fail;
}
msleep(3);
- errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
- if (errCode < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req - "
- "msp34xx(2) failed! errCode [%d]\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - "
+ "msp34xx(2) failed! error [%d]\n",
+ __func__, retval);
+ goto fail;
}
msleep(3);
}
- em28xx_add_into_devlist(dev);
-
retval = em28xx_register_analog_devices(dev);
if (retval < 0) {
- em28xx_release_resources(dev);
- goto fail_reg_devices;
+ goto fail;
}
em28xx_init_extension(dev);
return 0;
-fail_reg_devices:
+fail:
+ em28xx_i2c_unregister(dev);
+
+unregister_dev:
+ v4l2_device_unregister(&dev->v4l2_dev);
+
return retval;
}
mutex_unlock(&em28xx_devlist_mutex);
};
-void em28xx_add_into_devlist(struct em28xx *dev)
-{
- mutex_lock(&em28xx_devlist_mutex);
- list_add_tail(&dev->devlist, &em28xx_devlist);
- mutex_unlock(&em28xx_devlist_mutex);
-};
-
/*
* Extension interface
*/
void em28xx_init_extension(struct em28xx *dev)
{
- struct em28xx_ops *ops = NULL;
+ const struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
- if (!list_empty(&em28xx_extension_devlist)) {
- list_for_each_entry(ops, &em28xx_extension_devlist, next) {
- if (ops->init)
- ops->init(dev);
- }
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ list_for_each_entry(ops, &em28xx_extension_devlist, next) {
+ if (ops->init)
+ ops->init(dev);
}
mutex_unlock(&em28xx_devlist_mutex);
}