clk: hisilicon: add CRG driver for hi3519 soc
authorJiancheng Xue <xuejiancheng@hisilicon.com>
Sat, 23 Apr 2016 07:40:30 +0000 (15:40 +0800)
committerStephen Boyd <sboyd@codeaurora.org>
Fri, 6 May 2016 18:13:32 +0000 (11:13 -0700)
The CRG(Clock and Reset Generator) block provides clock
and reset signals for other modules in hi3519 soc.

Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Documentation/devicetree/bindings/clock/hi3519-crg.txt [new file with mode: 0644]
drivers/clk/hisilicon/Kconfig
drivers/clk/hisilicon/Makefile
drivers/clk/hisilicon/clk-hi3519.c [new file with mode: 0644]
include/dt-bindings/clock/hi3519-clock.h [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
new file mode 100644 (file)
index 0000000..acd1f23
--- /dev/null
@@ -0,0 +1,46 @@
+* Hisilicon Hi3519 Clock and Reset Generator(CRG)
+
+The Hi3519 CRG module provides clock and reset signals to various
+controllers within the SoC.
+
+This binding uses the following bindings:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+    Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller@12010000 {
+       compatible = "hisilicon,hi3519-crg";
+       reg = <0x12010000 0x10000>;
+       #clock-cells = <1>;
+       #reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@12110000 {
+       compatible = "hisilicon,hi3519-i2c";
+       reg = <0x12110000 0x1000>;
+       clocks = <&CRG HI3519_I2C0_RST>;
+       resets = <&CRG 0xe4 0>;
+};
index 3cd349c728e944ca6b19daa13ae4f09e4b65fb1d..3f537a04c6a633b10fb29e0cb390bcd3a54be976 100644 (file)
@@ -1,3 +1,11 @@
+config COMMON_CLK_HI3519
+       tristate "Hi3519 Clock Driver"
+       depends on ARCH_HISI || COMPILE_TEST
+       select RESET_HISI
+       default ARCH_HISI
+       help
+         Build the clock driver for hi3519.
+
 config COMMON_CLK_HI6220
        bool "Hi6220 Clock Driver"
        depends on ARCH_HISI || COMPILE_TEST
index c03775350e63c92bc0aff0c5a4c0dd6c159b2de4..e169ec7da0239426c9f26455b479167b1d125642 100644 (file)
@@ -7,6 +7,7 @@ obj-y   += clk.o clkgate-separated.o clkdivider-hi6220.o
 obj-$(CONFIG_ARCH_HI3xxx)      += clk-hi3620.o
 obj-$(CONFIG_ARCH_HIP04)       += clk-hip04.o
 obj-$(CONFIG_ARCH_HIX5HD2)     += clk-hix5hd2.o
+obj-$(CONFIG_COMMON_CLK_HI3519)        += clk-hi3519.o
 obj-$(CONFIG_COMMON_CLK_HI6220)        += clk-hi6220.o
 obj-$(CONFIG_RESET_HISI)       += reset.o
 obj-$(CONFIG_STUB_CLK_HI6220)  += clk-hi6220-stub.o
diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
new file mode 100644 (file)
index 0000000..715c730
--- /dev/null
@@ -0,0 +1,131 @@
+/*
+ * Hi3519 Clock Driver
+ *
+ * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include "clk.h"
+#include "reset.h"
+
+#define HI3519_INNER_CLK_OFFSET        64
+#define HI3519_FIXED_24M       65
+#define HI3519_FIXED_50M       66
+#define HI3519_FIXED_75M       67
+#define HI3519_FIXED_125M      68
+#define HI3519_FIXED_150M      69
+#define HI3519_FIXED_200M      70
+#define HI3519_FIXED_250M      71
+#define HI3519_FIXED_300M      72
+#define HI3519_FIXED_400M      73
+#define HI3519_FMC_MUX         74
+
+#define HI3519_NR_CLKS         128
+
+static const struct hisi_fixed_rate_clock hi3519_fixed_rate_clks[] = {
+       { HI3519_FIXED_24M, "24m", NULL, 0, 24000000, },
+       { HI3519_FIXED_50M, "50m", NULL, 0, 50000000, },
+       { HI3519_FIXED_75M, "75m", NULL, 0, 75000000, },
+       { HI3519_FIXED_125M, "125m", NULL, 0, 125000000, },
+       { HI3519_FIXED_150M, "150m", NULL, 0, 150000000, },
+       { HI3519_FIXED_200M, "200m", NULL, 0, 200000000, },
+       { HI3519_FIXED_250M, "250m", NULL, 0, 250000000, },
+       { HI3519_FIXED_300M, "300m", NULL, 0, 300000000, },
+       { HI3519_FIXED_400M, "400m", NULL, 0, 400000000, },
+};
+
+static const char *const fmc_mux_p[] = {
+               "24m", "75m", "125m", "150m", "200m", "250m", "300m", "400m", };
+static u32 fmc_mux_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+static const struct hisi_mux_clock hi3519_mux_clks[] = {
+       { HI3519_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
+               CLK_SET_RATE_PARENT, 0xc0, 2, 3, 0, fmc_mux_table, },
+};
+
+static const struct hisi_gate_clock hi3519_gate_clks[] = {
+       { HI3519_FMC_CLK, "clk_fmc", "fmc_mux",
+               CLK_SET_RATE_PARENT, 0xc0, 1, 0, },
+       { HI3519_UART0_CLK, "clk_uart0", "24m",
+               CLK_SET_RATE_PARENT, 0xe4, 20, 0, },
+       { HI3519_UART1_CLK, "clk_uart1", "24m",
+               CLK_SET_RATE_PARENT, 0xe4, 21, 0, },
+       { HI3519_UART2_CLK, "clk_uart2", "24m",
+               CLK_SET_RATE_PARENT, 0xe4, 22, 0, },
+       { HI3519_UART3_CLK, "clk_uart3", "24m",
+               CLK_SET_RATE_PARENT, 0xe4, 23, 0, },
+       { HI3519_UART4_CLK, "clk_uart4", "24m",
+               CLK_SET_RATE_PARENT, 0xe4, 24, 0, },
+       { HI3519_SPI0_CLK, "clk_spi0", "50m",
+               CLK_SET_RATE_PARENT, 0xe4, 16, 0, },
+       { HI3519_SPI1_CLK, "clk_spi1", "50m",
+               CLK_SET_RATE_PARENT, 0xe4, 17, 0, },
+       { HI3519_SPI2_CLK, "clk_spi2", "50m",
+               CLK_SET_RATE_PARENT, 0xe4, 18, 0, },
+};
+
+static int hi3519_clk_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       struct hisi_clock_data *clk_data;
+       struct hisi_reset_controller *rstc;
+
+       rstc = hisi_reset_init(np);
+       if (!rstc)
+               return -ENOMEM;
+
+       clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
+       if (!clk_data) {
+               hisi_reset_exit(rstc);
+               return -ENODEV;
+       }
+
+       hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
+                                    ARRAY_SIZE(hi3519_fixed_rate_clks),
+                                    clk_data);
+       hisi_clk_register_mux(hi3519_mux_clks, ARRAY_SIZE(hi3519_mux_clks),
+                                       clk_data);
+       hisi_clk_register_gate(hi3519_gate_clks,
+                       ARRAY_SIZE(hi3519_gate_clks), clk_data);
+
+       return 0;
+}
+
+static const struct of_device_id hi3519_clk_match_table[] = {
+       { .compatible = "hisilicon,hi3519-crg" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, hi3519_clk_match_table);
+
+static struct platform_driver hi3519_clk_driver = {
+       .probe          = hi3519_clk_probe,
+       .driver         = {
+               .name   = "hi3519-clk",
+               .of_match_table = hi3519_clk_match_table,
+       },
+};
+
+static int __init hi3519_clk_init(void)
+{
+       return platform_driver_register(&hi3519_clk_driver);
+}
+core_initcall(hi3519_clk_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("HiSilicon Hi3519 Clock Driver");
diff --git a/include/dt-bindings/clock/hi3519-clock.h b/include/dt-bindings/clock/hi3519-clock.h
new file mode 100644 (file)
index 0000000..14f4d21
--- /dev/null
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DTS_HI3519_CLOCK_H
+#define __DTS_HI3519_CLOCK_H
+
+#define HI3519_FMC_CLK                 1
+#define HI3519_SPI0_CLK                        2
+#define HI3519_SPI1_CLK                        3
+#define HI3519_SPI2_CLK                        4
+#define HI3519_UART0_CLK               5
+#define HI3519_UART1_CLK               6
+#define HI3519_UART2_CLK               7
+#define HI3519_UART3_CLK               8
+#define HI3519_UART4_CLK               9
+#define HI3519_PWM_CLK                 10
+#define HI3519_DMA_CLK                 11
+#define HI3519_IR_CLK                  12
+#define HI3519_ETH_PHY_CLK             13
+#define HI3519_ETH_MAC_CLK             14
+#define HI3519_ETH_MACIF_CLK           15
+#define HI3519_USB2_BUS_CLK            16
+#define HI3519_USB2_PORT_CLK           17
+#define HI3519_USB3_CLK                        18
+
+#endif /* __DTS_HI3519_CLOCK_H */
This page took 0.027922 seconds and 5 git commands to generate.