#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */
#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */
-#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */
+#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status
+ * Register
+ */
#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */
#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */
-#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */
+#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification
+ * Number
+ */
/* MEMORY MAP FOR ELECTRABUZZ ASIC */
#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */
-#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */
+#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning
+ * register
+ */
#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */
#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */
-#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */
+#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status
+ * register
+ */
#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */
-#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */
+#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect
+ * Data Register
+ */
#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */
/* MEMORY MAP FOR MAGNEMITE */
-#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */
-#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */
-#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */
+#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data
+ * Register (32-bits)
+ */
+#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data
+ * Register low-word (16-bits)
+ */
+#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register
+ * high-word (16-bits)
+ */
#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */
#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */
-#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */
-#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */
-#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */
-#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */
-#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */
-#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */
-#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */
+#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register
+ * (32-bits)
+ */
+#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register
+ * low-word (16-bits)
+ */
+#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register
+ * high-word (16-bits)
+ */
+#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status
+ * Register
+ */
+#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect
+ * Data Register (32-bits)
+ */
+#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect
+ * Data Register low-word (16-bits)
+ */
+#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data
+ * Register high-word (16-bits)
+ */
#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
#define FT1000_REG_MAG_VERSION 0x0030 /* LLC Version */
#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */
#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */
#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */
-#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */
+#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request
+ * to reset dsp
+ */
#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */
#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */
#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */
#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */
/* Reserved Dual Port RAM offsets for Magnemite */
-#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */
-#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */
+#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card
+ * Messaging Area
+ */
+#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host
+ * Messaging Area
+ */
-#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */
+#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP
+ * FIFO tracking
+ */
#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */
#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */
#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */
-#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */
-#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */
+#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for
+ * PAD device
+ */
+#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for
+ * PAD device
+ */
#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */
#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */
-#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */
-#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */
-#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */
+#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready
+ * indicator
+ */
+#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready
+ * indicator
+ */
+#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from
+ * Basestation
+ */
#define FT1000_MAG_DSP_TIMER0_INDX 0x1
-#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from
+ * Basestation
+ */
#define FT1000_MAG_DSP_TIMER1_INDX 0x0
-#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from
+ * Basestation
+ */
#define FT1000_MAG_DSP_TIMER2_INDX 0x1
-#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from
+ * Basestation
+ */
#define FT1000_MAG_DSP_TIMER3_INDX 0x0
#define FT1000_MAG_TOTAL_LEN 0x200
#define FT1000_MAG_TOTAL_LEN_INDX 0x1
#define HOST_INTF_BE 0x1 /* Host interface big endian mode */
/* FT1000 to Host Doorbell assignments */
-#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */
+#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP
+ * has data for host in DPRAM
+ */
#define FT1000_DB_DNLD_RX 0x0002 /* Downloader handshake doorbell */
-#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */
-#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */
+#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to
+ * reset the ASIC
+ */
+#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that
+ * it will reset the ASIC
+ */
#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */
/* Host to FT1000 Doorbell assignments */
-#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */
+#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host
+ * has data for DSP in DPRAM.
+ */
#define FT1000_DB_DNLD_TX 0x0200 /* Downloader handshake doorbell */
#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */
-#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */
+#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a
+ * heartbeat message for DSP.
+ */
#define hi 0x6869 /* PC Card heartbeat values */
#define ho 0x686f /* PC Card heartbeat values */
/* Magnemite specific defines */
-#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */
-#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */
+#define hi_mag 0x6968 /* Byte swap hi to avoid
+ * additional system call
+ */
+#define ho_mag 0x6f68 /* Byte swap ho to avoid
+ * additional system call
+ */
/* Bit field definitions for Host Interrupt Status Register */
/* Indicate the cause of an interrupt. */
#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */
#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */
#define ISR_MASK_ALL 0xffff /* Mask all interrupts */
-/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */
+/* Default interrupt mask
+ * (Enable Doorbell pending and Packet available interrupts)
+ */
#define ISR_DEFAULT_MASK 0x7ff9
/* Bit field definition for Host Control Register */
-#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */
+#define DSP_RESET_BIT 0x0001 /* Bit field to control
+ * dsp reset state
+ */
/* (0 = out of reset 1 = reset) */
-#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */
+#define ASIC_RESET_BIT 0x0002 /* Bit field to control
+ * ASIC reset state
+ */
/* (0 = out of reset 1 = reset) */
#define DSP_UNENCRYPTED 0x0004
#define DSP_ENCRYPTED 0x0008
unsigned char source; /* hardware source id */
/* Host = 0x10 */
/* Dsp = 0x20 */
- unsigned char destination; /* hardware destination id (refer to source) */
+ unsigned char destination; /* hardware destination id
+ * (refer to source)
+ */
unsigned char portdest; /* software destination port id */
/* Host = 0x00 */
/* Applicaton Broadcast = 0x10 */
/* Dsp Airlink = 0x90 */
/* Dsp Loader = 0xa0 */
/* Dsp MIP = 0xb0 */
- unsigned char portsrc; /* software source port id (refer to portdest) */
+ unsigned char portsrc; /* software source port id
+ * (refer to portdest)
+ */
unsigned short sh_str_id; /* not used */
unsigned char control; /* not used */
unsigned char rsvd1;
projects / deliverable / linux.git / commitdiff
