#include "target.h"
#include "i386-low.h"
+/* Support for hardware watchpoints and breakpoints using the i386
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
/* Support for 8-byte wide hw watchpoints. */
#ifndef TARGET_HAS_DR_LEN_8
/* NOTE: sizeof (long) == 4 on win64. */
state->dr_status_mirror = 0;
}
-/* Print the values of the mirrored debug registers. This is enabled via
- the "set debug-hw-points 1" monitor command. */
+/* Print the values of the mirrored debug registers. */
static void
i386_show_dr (struct i386_debug_reg_state *state,
/* Insert a watchpoint to watch a memory region which starts at
address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE_FROM_PACKET. Return 0 on success, -1 on failure. */
+ of the type TYPE. Return 0 on success, -1 on failure. */
int
i386_low_insert_watchpoint (struct i386_debug_reg_state *state,
}
/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return true.
- Otherwise, return false. */
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
int
i386_low_stopped_data_address (struct i386_debug_reg_state *state,
return rc;
}
-/* Return true if the inferior has some watchpoint that triggered.
- Otherwise return false. */
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
int
i386_low_stopped_by_watchpoint (struct i386_debug_reg_state *state)
The functions below implement debug registers sharing by reference
counts, and allow to watch regions up to 16 bytes long. */
+/* Low-level function vector. */
struct i386_dr_low_type i386_dr_low;
/* Support for 8-byte wide hw watchpoints. */
i386_forget_process (ptid_get_pid (inferior_ptid));
}
-/* Print the values of the mirrored debug registers. This is called
- when maint_show_dr is non-zero. To set that up, type "maint
- show-debug-regs" at GDB's prompt. */
+/* Print the values of the mirrored debug registers. */
static void
i386_show_dr (struct i386_debug_reg_state *state,
&& state->dr_mirror[i] == addr
&& I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
{
- if (--state->dr_ref_count[i] == 0) /* no longer in use? */
+ if (--state->dr_ref_count[i] == 0) /* No longer in use? */
{
/* Reset our mirror. */
state->dr_mirror[i] = 0;
return nregs <= DR_NADDR ? 1 : 0;
}
-/* If the inferior has some watchpoint that triggered, set the
- address associated with that watchpoint and return non-zero.
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
Otherwise, return zero. */
static int
unsigned control = 0;
/* In non-stop/async, threads can be running while we change the
- STATE (and friends). Say, we set a watchpoint, and let threads
- resume. Now, say you delete the watchpoint, or add/remove
- watchpoints such that STATE changes while threads are running.
- On targets that support non-stop, inserting/deleting watchpoints
- updates the STATE only. It does not update the real thread's
- debug registers; that's only done prior to resume. Instead, if
- threads are running when the mirror changes, a temporary and
- transparent stop on all threads is forced so they can get their
- copy of the debug registers updated on re-resume. Now, say,
- a thread hit a watchpoint before having been updated with the new
- STATE contents, and we haven't yet handled the corresponding
- SIGTRAP. If we trusted STATE below, we'd mistake the real
- trapped address (from the last time we had updated debug
- registers in the thread) with whatever was currently in STATE.
- So to fix this, STATE always represents intention, what we _want_
- threads to have in debug registers. To get at the address and
- cause of the trap, we need to read the state the thread still has
- in its debug registers.
+ global dr_mirror (and friends). Say, we set a watchpoint, and
+ let threads resume. Now, say you delete the watchpoint, or
+ add/remove watchpoints such that dr_mirror changes while threads
+ are running. On targets that support non-stop,
+ inserting/deleting watchpoints updates the global dr_mirror only.
+ It does not update the real thread's debug registers; that's only
+ done prior to resume. Instead, if threads are running when the
+ mirror changes, a temporary and transparent stop on all threads
+ is forced so they can get their copy of the debug registers
+ updated on re-resume. Now, say, a thread hit a watchpoint before
+ having been updated with the new dr_mirror contents, and we
+ haven't yet handled the corresponding SIGTRAP. If we trusted
+ dr_mirror below, we'd mistake the real trapped address (from the
+ last time we had updated debug registers in the thread) with
+ whatever was currently in dr_mirror. So to fix this, dr_mirror
+ always represents intention, what we _want_ threads to have in
+ debug registers. To get at the address and cause of the trap, we
+ need to read the state the thread still has in its debug
+ registers.
In sum, always get the current debug register values the current
thread has, instead of trusting the global mirror. If the thread
return rc;
}
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
static int
i386_stopped_by_watchpoint (struct target_ops *ops)
{
projects / deliverable / binutils-gdb.git / commitdiff
