mmc: mxs-mmc: use global stmp_device functionality

Use global stmp_device functionality to reduce mach-dependency.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index bb03ddda481d659bb8aeee6d348bf5a33908e7c3..2ea53613c794e9bdb6b757f7bf95a5f71f203d70 100644 (file)
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -40,9 +40,9 @@
 #include <linux/module.h>
 #include <linux/fsl/mxs-dma.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/stmp_device.h>
 
 #include <mach/mxs.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 
 #define DRIVER_NAME    "mxs-mmc"
@@ -191,7 +191,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
 {
        u32 ctrl0, ctrl1;
 
-       mxs_reset_block(host->base);
+       stmp_reset_block(host->base);
 
        ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
        ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
@@ -279,7 +279,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 
        stat = readl(host->base + HW_SSP_CTRL1);
        writel(stat & MXS_MMC_IRQ_BITS,
-              host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
+              host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
 
        if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
                mmc_signal_sdio_irq(host->mmc);
@@ -637,18 +637,18 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
        if (enable) {
                writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
-                      host->base + HW_SSP_CTRL0 + MXS_SET_ADDR);
+                      host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
                writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
-                      host->base + HW_SSP_CTRL1 + MXS_SET_ADDR);
+                      host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_SET);
 
                if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
                        mmc_signal_sdio_irq(host->mmc);
 
        } else {
                writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
-                      host->base + HW_SSP_CTRL0 + MXS_CLR_ADDR);
+                      host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
                writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
-                      host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
+                      host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
        }
 
        spin_unlock_irqrestore(&host->lock, flags);