cpufreq: sh: move cpufreq driver to drivers/cpufreq
authorViresh Kumar <viresh.kumar@linaro.org>
Thu, 4 Apr 2013 12:54:22 +0000 (12:54 +0000)
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>
Wed, 10 Apr 2013 11:19:25 +0000 (13:19 +0200)
This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
arch/sh/Kconfig
arch/sh/kernel/Makefile
arch/sh/kernel/cpufreq.c [deleted file]
drivers/cpufreq/Kconfig
drivers/cpufreq/Makefile
drivers/cpufreq/sh-cpufreq.c [new file with mode: 0644]

index 5e859633ce69f13c9d2b1d1c1a5727ad986a9fab..06e3163bdc11b3b4371b28bf87866edb729942aa 100644 (file)
@@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY
 endmenu
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-       tristate "SuperH CPU Frequency driver"
-       depends on CPU_FREQ
-       select CPU_FREQ_TABLE
-       help
-         This adds the cpufreq driver for SuperH. Any CPU that supports
-         clock rate rounding through the clock framework can use this
-         driver. While it will make the kernel slightly larger, this is
-         harmless for CPUs that don't support rate rounding. The driver
-         will also generate a notice in the boot log before disabling
-         itself if the CPU in question is not capable of rate rounding.
-
-         For details, take a look at <file:Documentation/cpu-freq>.
-
-         If unsure, say N.
-
 endmenu
 
 source "arch/sh/drivers/Kconfig"
index f259b37874e907176dfe8ee3a50cde1cef9fdc72..261c8bfd75ce8340c5054957d4a219f005cdd17a 100644 (file)
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL)                += vsyscall/
 obj-$(CONFIG_SMP)              += smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
 obj-$(CONFIG_KGDB)             += kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)      += cpufreq.o
 obj-$(CONFIG_MODULES)          += sh_ksyms_$(BITS).o module.o
 obj-$(CONFIG_KEXEC)            += machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)       += crash_dump.o
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
deleted file mode 100644 (file)
index 88c8fee..0000000
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/sh/kernel/cpufreq.c
- *
- * cpufreq driver for the SuperH processors.
- *
- * Copyright (C) 2002 - 2012 Paul Mundt
- * Copyright (C) 2002 M. R. Brown
- *
- * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
- *
- *   Copyright (C) 2004-2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "cpufreq: " fmt
-
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/cpumask.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/sched.h>       /* set_cpus_allowed() */
-#include <linux/clk.h>
-#include <linux/percpu.h>
-#include <linux/sh_clk.h>
-
-static DEFINE_PER_CPU(struct clk, sh_cpuclk);
-
-static unsigned int sh_cpufreq_get(unsigned int cpu)
-{
-       return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
-                            unsigned int target_freq,
-                            unsigned int relation)
-{
-       unsigned int cpu = policy->cpu;
-       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-       cpumask_t cpus_allowed;
-       struct cpufreq_freqs freqs;
-       struct device *dev;
-       long freq;
-
-       cpus_allowed = current->cpus_allowed;
-       set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-       BUG_ON(smp_processor_id() != cpu);
-
-       dev = get_cpu_device(cpu);
-
-       /* Convert target_freq from kHz to Hz */
-       freq = clk_round_rate(cpuclk, target_freq * 1000);
-
-       if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
-               return -EINVAL;
-
-       dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
-
-       freqs.old       = sh_cpufreq_get(cpu);
-       freqs.new       = (freq + 500) / 1000;
-       freqs.flags     = 0;
-
-       cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-       set_cpus_allowed_ptr(current, &cpus_allowed);
-       clk_set_rate(cpuclk, freq);
-       cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-       dev_dbg(dev, "set frequency %lu Hz\n", freq);
-
-       return 0;
-}
-
-static int sh_cpufreq_verify(struct cpufreq_policy *policy)
-{
-       struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
-       struct cpufreq_frequency_table *freq_table;
-
-       freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
-       if (freq_table)
-               return cpufreq_frequency_table_verify(policy, freq_table);
-
-       cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-                                    policy->cpuinfo.max_freq);
-
-       policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-       policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-
-       cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-                                    policy->cpuinfo.max_freq);
-
-       return 0;
-}
-
-static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-       unsigned int cpu = policy->cpu;
-       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-       struct cpufreq_frequency_table *freq_table;
-       struct device *dev;
-
-       dev = get_cpu_device(cpu);
-
-       cpuclk = clk_get(dev, "cpu_clk");
-       if (IS_ERR(cpuclk)) {
-               dev_err(dev, "couldn't get CPU clk\n");
-               return PTR_ERR(cpuclk);
-       }
-
-       policy->cur = sh_cpufreq_get(cpu);
-
-       freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
-       if (freq_table) {
-               int result;
-
-               result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-               if (!result)
-                       cpufreq_frequency_table_get_attr(freq_table, cpu);
-       } else {
-               dev_notice(dev, "no frequency table found, falling back "
-                          "to rate rounding.\n");
-
-               policy->min = policy->cpuinfo.min_freq =
-                       (clk_round_rate(cpuclk, 1) + 500) / 1000;
-               policy->max = policy->cpuinfo.max_freq =
-                       (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-       }
-
-       policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
-       dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
-              "Maximum %u.%03u MHz.\n",
-              policy->min / 1000, policy->min % 1000,
-              policy->max / 1000, policy->max % 1000);
-
-       return 0;
-}
-
-static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-       unsigned int cpu = policy->cpu;
-       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-
-       cpufreq_frequency_table_put_attr(cpu);
-       clk_put(cpuclk);
-
-       return 0;
-}
-
-static struct freq_attr *sh_freq_attr[] = {
-       &cpufreq_freq_attr_scaling_available_freqs,
-       NULL,
-};
-
-static struct cpufreq_driver sh_cpufreq_driver = {
-       .owner          = THIS_MODULE,
-       .name           = "sh",
-       .get            = sh_cpufreq_get,
-       .target         = sh_cpufreq_target,
-       .verify         = sh_cpufreq_verify,
-       .init           = sh_cpufreq_cpu_init,
-       .exit           = sh_cpufreq_cpu_exit,
-       .attr           = sh_freq_attr,
-};
-
-static int __init sh_cpufreq_module_init(void)
-{
-       pr_notice("SuperH CPU frequency driver.\n");
-       return cpufreq_register_driver(&sh_cpufreq_driver);
-}
-
-static void __exit sh_cpufreq_module_exit(void)
-{
-       cpufreq_unregister_driver(&sh_cpufreq_driver);
-}
-
-module_init(sh_cpufreq_module_init);
-module_exit(sh_cpufreq_module_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("cpufreq driver for SuperH");
-MODULE_LICENSE("GPL");
index 5030df5cd3eb23ff7c42d190d92c05dafb93825e..602d5dbc434599eca6a443eb709eab3c5a6d05c8 100644 (file)
@@ -258,5 +258,23 @@ depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
 endmenu
 
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+       tristate "SuperH CPU Frequency driver"
+       select CPU_FREQ_TABLE
+       help
+         This adds the cpufreq driver for SuperH. Any CPU that supports
+         clock rate rounding through the clock framework can use this
+         driver. While it will make the kernel slightly larger, this is
+         harmless for CPUs that don't support rate rounding. The driver
+         will also generate a notice in the boot log before disabling
+         itself if the CPU in question is not capable of rate rounding.
+
+         For details, take a look at <file:Documentation/cpu-freq>.
+
+         If unsure, say N.
+endmenu
+
 endif
 endmenu
index 9659cbbad25e5b40dd1e08e8341c64856609759d..3930d2e6a664bcaaff767e06ccb2d75177134678 100644 (file)
@@ -83,3 +83,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3)               += cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)                  += cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)                += ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)                += loongson2_cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ)              += sh-cpufreq.o
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
new file mode 100644 (file)
index 0000000..73adb64
--- /dev/null
@@ -0,0 +1,189 @@
+/*
+ * cpufreq driver for the SuperH processors.
+ *
+ * Copyright (C) 2002 - 2012 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown
+ *
+ * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
+ *
+ *   Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "cpufreq: " fmt
+
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/sched.h>       /* set_cpus_allowed() */
+#include <linux/clk.h>
+#include <linux/percpu.h>
+#include <linux/sh_clk.h>
+
+static DEFINE_PER_CPU(struct clk, sh_cpuclk);
+
+static unsigned int sh_cpufreq_get(unsigned int cpu)
+{
+       return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
+}
+
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int sh_cpufreq_target(struct cpufreq_policy *policy,
+                            unsigned int target_freq,
+                            unsigned int relation)
+{
+       unsigned int cpu = policy->cpu;
+       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+       cpumask_t cpus_allowed;
+       struct cpufreq_freqs freqs;
+       struct device *dev;
+       long freq;
+
+       cpus_allowed = current->cpus_allowed;
+       set_cpus_allowed_ptr(current, cpumask_of(cpu));
+
+       BUG_ON(smp_processor_id() != cpu);
+
+       dev = get_cpu_device(cpu);
+
+       /* Convert target_freq from kHz to Hz */
+       freq = clk_round_rate(cpuclk, target_freq * 1000);
+
+       if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
+               return -EINVAL;
+
+       dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
+
+       freqs.old       = sh_cpufreq_get(cpu);
+       freqs.new       = (freq + 500) / 1000;
+       freqs.flags     = 0;
+
+       cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+       set_cpus_allowed_ptr(current, &cpus_allowed);
+       clk_set_rate(cpuclk, freq);
+       cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+       dev_dbg(dev, "set frequency %lu Hz\n", freq);
+
+       return 0;
+}
+
+static int sh_cpufreq_verify(struct cpufreq_policy *policy)
+{
+       struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
+       struct cpufreq_frequency_table *freq_table;
+
+       freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
+       if (freq_table)
+               return cpufreq_frequency_table_verify(policy, freq_table);
+
+       cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+                                    policy->cpuinfo.max_freq);
+
+       policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
+       policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
+
+       cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+                                    policy->cpuinfo.max_freq);
+
+       return 0;
+}
+
+static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+       unsigned int cpu = policy->cpu;
+       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+       struct cpufreq_frequency_table *freq_table;
+       struct device *dev;
+
+       dev = get_cpu_device(cpu);
+
+       cpuclk = clk_get(dev, "cpu_clk");
+       if (IS_ERR(cpuclk)) {
+               dev_err(dev, "couldn't get CPU clk\n");
+               return PTR_ERR(cpuclk);
+       }
+
+       policy->cur = sh_cpufreq_get(cpu);
+
+       freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
+       if (freq_table) {
+               int result;
+
+               result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+               if (!result)
+                       cpufreq_frequency_table_get_attr(freq_table, cpu);
+       } else {
+               dev_notice(dev, "no frequency table found, falling back "
+                          "to rate rounding.\n");
+
+               policy->min = policy->cpuinfo.min_freq =
+                       (clk_round_rate(cpuclk, 1) + 500) / 1000;
+               policy->max = policy->cpuinfo.max_freq =
+                       (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
+       }
+
+       policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+       dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
+              "Maximum %u.%03u MHz.\n",
+              policy->min / 1000, policy->min % 1000,
+              policy->max / 1000, policy->max % 1000);
+
+       return 0;
+}
+
+static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+       unsigned int cpu = policy->cpu;
+       struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+
+       cpufreq_frequency_table_put_attr(cpu);
+       clk_put(cpuclk);
+
+       return 0;
+}
+
+static struct freq_attr *sh_freq_attr[] = {
+       &cpufreq_freq_attr_scaling_available_freqs,
+       NULL,
+};
+
+static struct cpufreq_driver sh_cpufreq_driver = {
+       .owner          = THIS_MODULE,
+       .name           = "sh",
+       .get            = sh_cpufreq_get,
+       .target         = sh_cpufreq_target,
+       .verify         = sh_cpufreq_verify,
+       .init           = sh_cpufreq_cpu_init,
+       .exit           = sh_cpufreq_cpu_exit,
+       .attr           = sh_freq_attr,
+};
+
+static int __init sh_cpufreq_module_init(void)
+{
+       pr_notice("SuperH CPU frequency driver.\n");
+       return cpufreq_register_driver(&sh_cpufreq_driver);
+}
+
+static void __exit sh_cpufreq_module_exit(void)
+{
+       cpufreq_unregister_driver(&sh_cpufreq_driver);
+}
+
+module_init(sh_cpufreq_module_init);
+module_exit(sh_cpufreq_module_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("cpufreq driver for SuperH");
+MODULE_LICENSE("GPL");
This page took 0.031049 seconds and 5 git commands to generate.