* lib/gdb.exp (skip_stl_tests): New.
(gdb_compile): Symbian needs -ldl.
(shlib_target_file): New.
(shlib_symbol_file): New.
(gdb_load_shlibs): Use shlib_target_file.
* lib/mi-support.exp (mi_load_shlibs): Use shlib_target_file.
* gdb.cp/exception.exp: Use skip_stl_tests.
* gdb.cp/bs15503.exp: Use skip_stl_tests. Use untested.
* gdb.cp/try_catch.exp: Use skip_stl_tests.
* gdb.cp/mb-templates.exp: Ditto.
* gdb.base/commands.exp: Relax regexes.
* gdb.base/watchpoint-solib.exp: Don't skip on symbian. Use
shlib_target_file and shlib_symbol_file.
* gdb.base/maint.exp: Allow lowercase t. Allow .rodata in
sections.
* gdb.base/ending-run.exp: Accept E32Main for symbian.
* gdb.base/solib-disc.exp: Use
shlib_target_file and shlib_symbol_file.
* gdb.base/unload.exp: Don't skip on symbian. Use
shlib_target_file and shlib_symbol_file.
* gdb.base/list.exp: Check use_gdb_stub instead of is_remote.
+2010-03-12 Daniel Jacobowitz <dan@codesourcery.com>
+
+ gdb/testsuite/
+ * lib/gdb.exp (skip_stl_tests): New.
+ (gdb_compile): Symbian needs -ldl.
+ (shlib_target_file): New.
+ (shlib_symbol_file): New.
+ (gdb_load_shlibs): Use shlib_target_file.
+ * lib/mi-support.exp (mi_load_shlibs): Use shlib_target_file.
+ * gdb.cp/exception.exp: Use skip_stl_tests.
+ * gdb.cp/bs15503.exp: Use skip_stl_tests. Use untested.
+ * gdb.cp/try_catch.exp: Use skip_stl_tests.
+ * gdb.cp/mb-templates.exp: Ditto.
+ * gdb.base/commands.exp: Relax regexes.
+ * gdb.base/watchpoint-solib.exp: Don't skip on symbian. Use
+ shlib_target_file and shlib_symbol_file.
+ * gdb.base/maint.exp: Allow lowercase t. Allow .rodata in
+ sections.
+ * gdb.base/ending-run.exp: Accept E32Main for symbian.
+ * gdb.base/solib-disc.exp: Use
+ shlib_target_file and shlib_symbol_file.
+ * gdb.base/unload.exp: Don't skip on symbian. Use
+ shlib_target_file and shlib_symbol_file.
+ * gdb.base/list.exp: Check use_gdb_stub instead of is_remote.
+
2010-03-12 Pedro Alves <pedro@codesourcery.com>
* gdb.trace/backtrace.exp: Adjust for x86 and x86_64.
gdb_run_cmd
gdb_expect {
- -re ".*factorial command-list executed.*1.*$gdb_prompt $" {
+ -re ".*factorial command-list executed.*$gdb_prompt $" {
pass "run factorial until breakpoint"
}
-re ".*$gdb_prompt $" {
gdb_run_cmd
gdb_expect {
- -re ".*factorial tbreak commands executed.*1.*$gdb_prompt $" {
+ -re ".*factorial tbreak commands executed.*$gdb_prompt $" {
pass "run factorial until temporary breakpoint"
}
timeout { fail "(timeout) run factorial until temporary breakpoint" }
# another `next' is necessary.
gdb_test "next" ".*in start_l ().*" "step out of main"
}
+ -re "E32Main (.*).*$gdb_prompt $" {
+ # On SymbianOS there's a different function which calls main.
+ pass "step out of main"
+ }
-re ".*in.*currently asm.*$gdb_prompt $" {
pass "step out of main"
}
# list the lines there instead of main, so we skip this test for remote targets.
# The second case is for optimized code, it is still correct.
- if [is_remote target] {
+ if [target_info exists use_gdb_stub] {
runto_main;
unsupported "list default lines around main";
} else {
{
send_gdb "shell grep factorial msymbols_output\n"
gdb_expect {
- -re "\\\[ *$decimal\\\] T\[ \t\]+$hex factorial.*$gdb_prompt $"\
+ -re "\\\[ *$decimal\\\] \[tT\]\[ \t\]+$hex factorial.*$gdb_prompt $"\
{ pass "maint print msymbols" }
-re ".*$gdb_prompt $" { fail "maint print msymbols" }
timeout { fail "(timeout) maint print msymbols" }
gdb_test_multiple "shell ls msymbols_output2" "maint print msymbols" {
-re "msymbols_output2\r\n$gdb_prompt $" {
gdb_test_multiple "shell grep factorial msymbols_output2" "maint print msymbols" {
- -re "\\\[ *$decimal\\\] T\[ \t\]+$hex factorial.*$gdb_prompt $" {
+ -re "\\\[ *$decimal\\\] \[tT\]\[ \t\]+$hex factorial.*$gdb_prompt $" {
pass "maint print msymbols"
}
-re ".*$gdb_prompt $" {
gdb_expect {
-re ".* \\.text .*$gdb_prompt $" { fail "maint info sections DATA" }
-re ".* \\.data .*$gdb_prompt $" { pass "maint info sections DATA" }
+ -re ".* .rodata .*$gdb_prompt $" { pass "maint info sections DATA" }
-re ".*$gdb_prompt $" { fail "maint info sections DATA" }
timeout { fail "(timeout) maint info sections DATA" }
}
set libname "${libfile}.so"
set libobj "${objdir}/${subdir}/${libname}"
set execsrc "${srcdir}/${subdir}/${srcfile}"
+set lib_dlopen [shlib_target_file ${libname}]
+set lib_syms [shlib_symbol_file ${libname}]
remote_exec build "rm -f ${binfile}"
return -1
}
-set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${libname}\"]
+set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${lib_dlopen}\"]
if { [gdb_compile_shlib $libsrc $libobj {debug}] != ""
|| [gdb_compile $execsrc ${binfile} executable $exec_opts] != "" } {
return 0
}
-# TODO: Use LoadLibrary on this target instead of dlopen.
-if {[istarget arm*-*-symbianelf*]} {
- return 0
-}
-
set testfile "unload"
set libfile "unloadshr"
set libfile2 "unloadshr2"
set libsrc2 $srcdir/$subdir/$libfile2.c
set lib_sl $objdir/$subdir/$libname
set lib_sl2 $objdir/$subdir/$libname2
+set lib_dlopen [shlib_target_file ${libname}]
+set lib_dlopen2 [shlib_target_file ${libname2}]
+set lib_syms [shlib_symbol_file ${libname}]
+set lib_syms2 [shlib_symbol_file ${libname2}]
if [get_compiler_info ${binfile}] {
return -1
}
set lib_opts debug
-set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${libname}\" additional_flags=-DSHLIB_NAME2\=\"${libname2}\"]
+set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${lib_dlopen}\" additional_flags=-DSHLIB_NAME2\=\"${lib_dlopen2}\"]
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""
gdb_breakpoint "$testfile.c:[gdb_get_line_number "y-set-1" $testfile.c]" temporary
gdb_test "continue" \
-"Continuing.*warning: Temporarily disabling breakpoints for.*${libname}.*y-set-1.*" \
+"Continuing.*warning: Temporarily disabling breakpoints for.*${lib_syms}.*y-set-1.*" \
"continuing to unloaded libfile"
gdb_test "print y" " = 10" "print y from libfile"
gdb_breakpoint "$testfile.c:[gdb_get_line_number "y-set-1" $testfile.c]" temporary
gdb_test "continue" \
-"Continuing.*warning: Temporarily disabling breakpoints for.*${libname}.*y-set-1.*" \
+"Continuing.*warning: Temporarily disabling breakpoints for.*${lib_syms}.*y-set-1.*" \
"continuing to unloaded libfile"
set unloadshr_line2 [gdb_get_line_number "unloadshr2 break" ${libsrcfile2}]
gdb_breakpoint "$testfile.c:[gdb_get_line_number "y-set-2" $testfile.c]"
gdb_test "continue" \
-"Continuing.*warning: Temporarily disabling breakpoints for.*${libname2}.*y-set-2.*" \
+"Continuing.*warning: Temporarily disabling breakpoints for.*${lib_syms2}.*y-set-2.*" \
"continuing to unloaded libfile2"
gdb_test "print y" " = 200" "print y from libfile2"
return 0
}
-# TODO: Use LoadLibrary on this target instead of dlopen.
-if {[istarget arm*-*-symbianelf*]} {
- return 0
-}
-
set testfile "watchpoint-solib"
set libfile "watchpoint-solib-shr"
set libname "${libfile}.sl"
set shlibdir ${objdir}/${subdir}
set libsrc $srcdir/$subdir/$libfile.c
set lib_sl $objdir/$subdir/$libname
+set lib_dlopen [shlib_target_file ${libname}]
+set lib_syms [shlib_symbol_file ${libname}]
if [get_compiler_info ${binfile}] {
return -1
}
set lib_opts debug
-set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${libname}\"]
+set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME\=\"${lib_dlopen}\"]
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcfile $binfile executable $exec_opts] != ""} {
strace $tracelevel
}
-if { [skip_cplus_tests] } { continue }
+if { [skip_stl_tests] } { continue }
# On SPU this test fails because the executable exceeds local storage size.
if { [istarget "spu*-*-*"] } {
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable "debug c++"] != "" } {
- perror "Couldn't compile ${srcfile}"
+ untested bs15503.exp
return -1
}
strace $tracelevel
}
-if { [skip_cplus_tests] } { continue }
+if { [skip_stl_tests] } { continue }
# On SPU this test fails because the executable exceeds local storage size.
if { [istarget "spu*-*-*"] } {
strace $tracelevel
}
-if { [skip_cplus_tests] } { continue }
+if { [skip_stl_tests] } { continue }
# On SPU this test fails because the executable exceeds local storage size.
if { [istarget "spu*-*-*"] } {
strace $tracelevel
}
-if { [skip_cplus_tests] } { continue }
+if { [skip_stl_tests] } { continue }
#
# test running programs
strace $tracelevel
}
-if { [skip_cplus_tests] } { continue }
+if { [skip_stl_tests] } { continue }
# On SPU this test fails because the executable exceeds local storage size.
if { [istarget "spu*-*-*"] } {
return 0
}
+# Return a 1 for configurations for which don't have both C++ and the STL.
+
+proc skip_stl_tests {} {
+ # Symbian supports the C++ language, but the STL is missing
+ # (both headers and libraries).
+ if { [istarget "arm*-*-symbianelf*"] } {
+ return 1
+ }
+
+ return [skip_cplus_tests]
+}
+
# Return a 1 if I don't even want to try to test FORTRAN.
proc skip_fortran_tests {} {
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*]
- || [istarget arm*-*-symbianelf*]
|| [istarget hppa*-*-hpux*])} {
# Do not need anything.
} elseif { [istarget *-*-openbsd*] } {
lappend new_options "additional_flags=-Wl,-rpath,${outdir}"
+ } elseif { [istarget arm*-*-symbianelf*] } {
+ if { $shlib_load } {
+ lappend new_options "libs=-ldl"
+ }
} else {
if { $shlib_load } {
lappend new_options "libs=-ldl"
return -1
}
+# Return the filename to download to the target and load on the target
+# for this shared library. Normally just LIBNAME, unless shared libraries
+# for this target have separate link and load images.
+
+proc shlib_target_file { libname } {
+ return $libname
+}
+
+# Return the filename GDB will load symbols from when debugging this
+# shared library. Normally just LIBNAME, unless shared libraries for
+# this target have separate link and load images.
+
+proc shlib_symbol_file { libname } {
+ return $libname
+}
+
# gdb_download
#
# Copy a file to the remote target and return its target filename.
}
foreach file $args {
- gdb_download $file
+ gdb_download [shlib_target_file $file]
}
# Even if the target supplies full paths for shared libraries,
}
}
+# Download shared libraries to the target.
proc mi_load_shlibs { args } {
if {![is_remote target]} {
return
}
foreach file $args {
- gdb_download $file
+ gdb_download [shlib_target_file $file]
}
# Even if the target supplies full paths for shared libraries,
projects / deliverable / binutils-gdb.git / commitdiff
