regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9

The documentation lists both 1.8V and 3.3V for this regulator output,
but 3.3V is mentioned more often and also matches what JZ4770 and
JZ4780 expect as an input.

Note that the voltage of REG9 is not programmable, so this commit only
changes the voltage reported in sysfs and debugfs, not the actual
output voltage of the hardware.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 1994795407c54ad58f35f7609d4574bf1951f6e7..000d566e32a4e106744ee652dd25967a02fcb190 100644 (file)
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = {
                .ops = &act8865_ldo_ops,
                .type = REGULATOR_VOLTAGE,
                .n_voltages = 1,
-               .fixed_uV = 1800000,
+               .fixed_uV = 3300000,
                .enable_reg = ACT8600_LDO910_CTRL,
                .enable_mask = ACT8865_ENA,
                .owner = THIS_MODULE,