#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <35>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
#size-cells = <0>;
#gpio-cells = <3>;
+ pwm0_pins_a: pwm0@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ pwm1_pins_a: pwm1@0 {
+ allwinner,pins = "PI3";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
};
timer@01c20c00 {
interrupts = <24>;
};
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun4i-a10-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
i2c0: i2c@01c2ac00 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
i2c1: i2c@01c2b000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
i2c2: i2c@01c2b400 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
};
i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
timer@01c60000 {
<1 10 0xf08>;
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ interrupts = <0 120 4>,
+ <0 121 4>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 33 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
#size-cells = <0>;
#gpio-cells = <3>;
+ pwm0_pins_a: pwm0@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ pwm1_pins_a: pwm1@0 {
+ allwinner,pins = "PI3";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3@0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
interrupts = <0 24 4>;
};
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c3: i2c@01c2b800 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c4: i2c@01c2c000 {
- compatible = "allwinner,sun4i-i2c";
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
gmac: ethernet@01c50000 {
config I2C_EG20T
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
as well as the STA2X11 PCIe I/O HUB.
- config I2C_NUC900
- tristate "NUC900 I2C Driver"
- depends on ARCH_W90X900
- help
- Say Y here to include support for I2C controller in the
- Winbond/Nuvoton NUC900 based System-on-Chip devices.
-
config I2C_OCORES
tristate "OpenCores I2C Controller"
help
help
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+config I2C_CROS_EC_TUNNEL
+ tristate "ChromeOS EC tunnel I2C bus"
+ depends on MFD_CROS_EC
+ help
+ If you say yes here you get an I2C bus that will tunnel i2c commands
+ through to the other side of the ChromeOS EC to the i2c bus
+ connected there. This will work whatever the interface used to
+ talk to the EC (SPI, I2C or LPC).
+
config SCx200_I2C
tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
depends on SCx200_GPIO
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
- obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
+obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o