+Sun Sep 8 15:14:00 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * blockframe.c (inside_main_func): Cleanup slightly. Move
+ mainsym def into the block it's used in.
+ * configure.in configure: Allow NATDEPFILES to be recognized in
+ .mh files regardless of whitespace.
+
+ * cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to
+ keep downloads from hanging.
+
+ * remote-wiggler.c: Add support for flash upgrades.
+ * (wiggler_error): Fix message format. Add new error code.
+ * (wiggler_write_byets): Error code is hex. Report errors with
+ proper routine name.
+ * (wiggler_read_byets): Report errors with proper routine name.
+ * (get_packet): Add support for new flash commands.
+ * (wiggler_load): Call clear_symtab_users() to reset things
+ properly after download.
+ * (flash_xfer_memory bdm_update_flash_command): New funxtions to
+ support flash upgrades for Wiggler.
+ * (_initialize_remote_wiggler): Add `bdm update-flash' command.
+
Fri Sep 6 13:14:13 1996 Geoffrey Noer <noer@cygnus.com>
* ser-tcp.c: don't include netinet/tcp.h if __CYGWIN32__
#define WIGGLER_WRITE_INT_MEM 0x81 /* Write Internal Memory */
#define WIGGLER_JUMP 0x82 /* Jump to Subroutine */
+#define WIGGLER_ERASE_FLASH 0x90 /* Erase flash memory */
+#define WIGGLER_PROGRAM_FLASH 0x91 /* Write flash memory */
+#define WIGGLER_EXIT_MON 0x93 /* Exit the flash programming monitor */
+#define WIGGLER_ENTER_MON 0x94 /* Enter the flash programming monitor */
+
#define WIGGLER_SET_STATUS 0x0a /* Set status */
#define WIGGLER_FLAG_STOP 0x0 /* Stop the target, enter BDM */
#define WIGGLER_FLAG_START 0x01 /* Start the target at PC */
char buf[100];
fputs_filtered (s, gdb_stderr);
+ fputs_filtered (" ", gdb_stderr);
switch (error_code)
{
case 0x14: s = "Parameter error"; break;
case 0x15: s = "Internal error"; break;
case 0x16: s = "Register buffer error"; break;
+ case 0x80: s = "Flash erase error"; break;
default:
sprintf (buf, "Unknown error code %d", error_code);
s = buf;
int status, error_code;
numbytes = min (len, 256 - 8);
-/* numbytes = min (len, 40);*/
buf[1] = memaddr >> 24;
buf[2] = memaddr >> 16;
status = p[1];
error_code = p[2];
- if (error_code == 11) /* Got a bus error? */
+ if (error_code == 0x11) /* Got a bus error? */
{
CORE_ADDR error_address;
break;
}
else if (error_code != 0)
- wiggler_error ("wiggler_store_registers:", error_code);
+ wiggler_error ("wiggler_write_bytes:", error_code);
len -= numbytes;
memaddr += numbytes;
break;
}
else if (error_code != 0)
- wiggler_error ("wiggler_store_registers:", error_code);
+ wiggler_error ("wiggler_read_bytes:", error_code);
memcpy (myaddr, &p[4], numbytes);
/* ARGSUSED */
static int
-wiggler_xfer_memory(memaddr, myaddr, len, should_write, target)
+wiggler_xfer_memory (memaddr, myaddr, len, should_write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
case WIGGLER_MOVE_MEM: /* Move Memory */
case WIGGLER_WRITE_INT_MEM: /* Write Internal Memory */
case WIGGLER_JUMP: /* Jump to Subroutine */
+ case WIGGLER_ERASE_FLASH: /* Erase flash memory */
+ case WIGGLER_PROGRAM_FLASH: /* Write flash memory */
+ case WIGGLER_EXIT_MON: /* Exit the flash programming monitor */
+ case WIGGLER_ENTER_MON: /* Enter the flash programming monitor */
len = 0;
break;
case WIGGLER_GET_VERSION: /* Get Version */
int from_tty;
{
generic_load (args, from_tty);
+
inferior_pid = 0;
+
+/* This is necessary because many things were based on the PC at the time that
+ we attached to the monitor, which is no longer valid now that we have loaded
+ new code (and just changed the PC). Another way to do this might be to call
+ normal_stop, except that the stack may not be valid, and things would get
+ horribly confused... */
+
+ clear_symtab_users ();
}
/* BDM (at least on CPU32) uses a different breakpoint */
wait_for_inferior ();
normal_stop ();
}
+
+static int
+flash_xfer_memory (memaddr, myaddr, len, should_write, target)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ int len;
+ int should_write;
+ struct target_ops *target; /* ignored */
+{
+ char buf[256 + 10];
+ unsigned char *p;
+ int origlen;
+
+ if (!should_write)
+ abort ();
+
+ origlen = len;
+
+ buf[0] = WIGGLER_PROGRAM_FLASH;
+
+ while (len > 0)
+ {
+ int numbytes;
+ int pktlen;
+ int status, error_code;
+
+ numbytes = min (len, 256 - 6);
+
+ buf[1] = memaddr >> 24;
+ buf[2] = memaddr >> 16;
+ buf[3] = memaddr >> 8;
+ buf[4] = memaddr;
+
+ buf[5] = numbytes;
+
+ memcpy (&buf[6], myaddr, numbytes);
+ put_packet (buf, 6 + numbytes);
+ p = get_packet (WIGGLER_PROGRAM_FLASH, &pktlen, remote_timeout);
+ if (pktlen < 3)
+ error ("Truncated response packet from Wiggler");
+
+ status = p[1];
+ error_code = p[2];
+
+ if (error_code != 0)
+ wiggler_error ("flash_xfer_memory:", error_code);
+
+ len -= numbytes;
+ memaddr += numbytes;
+ myaddr += numbytes;
+ }
+
+ return origlen - len;
+}
+
+static void
+bdm_update_flash_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int status, pktlen;
+ struct cleanup *old_chain;
+
+ if (!wiggler_desc)
+ error ("Not connected to wiggler.");
+
+ if (!args)
+ error ("Must specify file containing new Wiggler code.");
+
+/* old_chain = make_cleanup (flash_cleanup, 0);*/
+
+ do_command (WIGGLER_ENTER_MON, &status, &pktlen);
+
+ do_command (WIGGLER_ERASE_FLASH, &status, &pktlen);
+
+ wiggler_ops.to_xfer_memory = flash_xfer_memory;
+
+ generic_load (args, from_tty);
+
+ wiggler_ops.to_xfer_memory = wiggler_xfer_memory;
+
+ do_command (WIGGLER_EXIT_MON, &status, &pktlen);
+
+/* discard_cleanups (old_chain);*/
+}
\f
/* Define the target subroutine names */
add_cmd ("reset", class_obscure, bdm_reset_command, "", &bdm_cmd_list);
add_cmd ("restart", class_obscure, bdm_restart_command, "", &bdm_cmd_list);
+ add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &bdm_cmd_list);
}
projects / deliverable / binutils-gdb.git / commitdiff
