device, like 'tty1'.
The file supports poll() to detect virtual
console switches.
+
+What: /sys/class/tty/ttyS0/uartclk
+Date: Sep 2012
+Contact: Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+ Shows the current uartclk value associated with the
+ UART port in serial_core, that is bound to TTY like ttyS0.
+ uartclk = 16 * baud_base
+
- S3C2410 GPIO Control
+ S3C24XX GPIO Control
====================
Introduction
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
- See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+ See Documentation/arm/Samsung/GPIO.txt for the core implementation.
GPIOLIB
GPIOLIB conversion
------------------
-If you need to convert your board or driver to use gpiolib from the exiting
-s3c2410 api, then here are some notes on the process.
+If you need to convert your board or driver to use gpiolib from the phased
+out s3c2410 API, then here are some notes on the process.
1) If your board is exclusively using an GPIO, say to control peripheral
power, then it will require to claim the gpio with gpio_request() before
as they have the same arguments, and can either take the pin specific
values, or the more generic special-function-number arguments.
-3) s3c2410_gpio_pullup() changs have the problem that whilst the
+3) s3c2410_gpio_pullup() changes have the problem that whilst the
s3c2410_gpio_pullup(x, 1) can be easily translated to the
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
are not so easy.
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
would return the value the pin is supposed to be outputting).
-6) s3c2410_gpio_getirq() should be directly replacable with the
+6) s3c2410_gpio_getirq() should be directly replaceable with the
gpio_to_irq() call.
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
-----------
Each pin has an unique number associated with it in regs-gpio.h,
- eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
+ e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
With the conversion to gpiolib, there is no longer a direct conversion
The following function allows the configuration of a given pin to
be changed.
- void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+ void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
- Eg:
+ e.g.:
- s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
- s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+ s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
+ s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
- The s3c_gpio_cfgpin() call is a functional replacement for this call.
-
Reading the current configuration
---------------------------------
- The current configuration of a pin can be read by using:
+ The current configuration of a pin can be read by using standard
+ gpiolib function:
- s3c2410_gpio_getcfg(unsigned int pin);
+ s3c_gpio_getcfg(unsigned int pin);
The return value will be from the same set of values which can be
- passed to s3c2410_gpio_cfgpin().
-
- The s3c_gpio_getcfg() call should be a functional replacement for
- this call.
+ passed to s3c_gpio_cfgpin().
Configuring a pull-up resistor
pull-up resistors enabled. This can be configured by the following
function:
- void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
- Where the to value is zero to set the pull-up off, and 1 to enable
- the specified pull-up. Any other values are currently undefined.
-
- The s3c_gpio_setpull() offers similar functionality, but with the
- ability to encode whether the pull is up or down. Currently there
- is no 'just on' state, so up or down must be selected.
-
-
-Getting the state of a PIN
---------------------------
-
- The state of a pin can be read by using the function:
-
- unsigned int s3c2410_gpio_getpin(unsigned int pin);
+ void s3c_gpio_setpull(unsigned int pin, unsigned int to);
- This will return either zero or non-zero. Do not count on this
- function returning 1 if the pin is set.
+ Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
+ and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
+ values are currently undefined.
- This call is now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-
-Setting the state of a PIN
---------------------------
-
- The value an pin is outputing can be modified by using the following:
- void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+Getting and setting the state of a PIN
+--------------------------------------
- Which sets the given pin to the value. Use 0 to write 0, and 1 to
- set the output to 1.
-
- This call is now implemented by the relevant gpiolib calls, convert
+ These calls are now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Getting the IRQ number associated with a PIN
--------------------------------------------
- The following function can map the given pin number to an IRQ
+ A standard gpiolib function can map the given pin number to an IRQ
number to pass to the IRQ system.
- int s3c2410_gpio_getirq(unsigned int pin);
+ int gpio_to_irq(unsigned int pin);
Note, not all pins have an IRQ.
- This call is now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-Authour
+Author
-------
-
Ben Dooks, 03 October 2004
Copyright 2004 Ben Dooks, Simtec Electronics
------------
This outlines the Samsung GPIO implementation and the architecture
-specific calls provided alongisde the drivers/gpio core.
+specific calls provided alongside the drivers/gpio core.
S3C24XX (Legacy)
----------------
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
-about these devices. Their implementation is being brought into line
+about these devices. Their implementation has been brought into line
with the core samsung implementation described in this document.
PIN configuration
-----------------
-Pin configuration is specific to the Samsung architecutre, with each SoC
+Pin configuration is specific to the Samsung architecture, with each SoC
registering the necessary information for the core gpio configuration
implementation to configure pins as necessary.
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
on these functions.
-
-
ff000000 ffbfffff Reserved for future expansion of DMA
mapping region.
+fee00000 feffffff Mapping of PCI I/O space. This is a static
+ mapping within the vmalloc space.
+
VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
Memory returned by vmalloc/ioremap will
be dynamically placed in this region.
--- /dev/null
+Broadcom BCM2835 device tree bindings
+-------------------------------------------
+
+Boards with the BCM2835 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm2835";
--- /dev/null
+* Marvell Tauros2 Cache
+
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+ tauros2 cache.
+ The features including
+ CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+ CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+ The definition can be found at
+ arch/arm/include/asm/hardware/cache-tauros2.h
+
+Example:
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
--- /dev/null
+* MSM Timer
+
+Properties:
+
+- compatible : Should at least contain "qcom,msm-timer". More specific
+ properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
+ purpose timer and a debug timer respectively.
+
+- interrupts : Interrupt indicating a match event.
+
+- reg : Specifies the base address of the timer registers. The second region
+ specifies an optional register used to configure the clock divider.
+
+- clock-frequency : The frequency of the timer in Hz.
+
+Optional:
+
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+ CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+
+Example:
+
+ timer@200a004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 2 0x301>;
+ reg = <0x0200a004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ timer@200a024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 3 0x301>;
+ reg = <0x0200a024 0x10>,
+ <0x0200a034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x40000>;
+ };
- OMAP3 BeagleBoard : Low cost community board
compatible = "ti,omap3-beagle", "ti,omap3"
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+
- OMAP4 SDP : Software Developement Board
compatible = "ti,omap4-sdp", "ti,omap4430"
Required properties:
- compatible : should be one of
+ "arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
+ "arm,cortex-a7-pmu"
+ "arm,cortex-a5-pmu"
+ "arm,arm11mpcore-pmu"
"arm,arm1176-pmu"
"arm,arm1136-pmu"
- interrupts : 1 combined interrupt or 1 per core.
--- /dev/null
+* Clock bindings for Freescale i.MX23
+
+Required properties:
+- compatible: Should be "fsl,imx23-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX23
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_pwr 41
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 32 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
+ clocks = <&clks 32>;
+ status = "disabled";
+};
--- /dev/null
+* Clock bindings for Freescale i.MX28
+
+Required properties:
+- compatible: Should be "fsl,imx28-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX28
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_pwr 62
+ usb1_pwr 63
+ enet_out 64
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 45 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ clocks = <&clks 45>;
+ status = "disabled";
+};
--- /dev/null
+* Clock bindings for Freescale i.MX6 Quad
+
+Required properties:
+- compatible: Should be "fsl,imx6q-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ ckil 1
+ ckih 2
+ osc 3
+ pll2_pfd0_352m 4
+ pll2_pfd1_594m 5
+ pll2_pfd2_396m 6
+ pll3_pfd0_720m 7
+ pll3_pfd1_540m 8
+ pll3_pfd2_508m 9
+ pll3_pfd3_454m 10
+ pll2_198m 11
+ pll3_120m 12
+ pll3_80m 13
+ pll3_60m 14
+ twd 15
+ step 16
+ pll1_sw 17
+ periph_pre 18
+ periph2_pre 19
+ periph_clk2_sel 20
+ periph2_clk2_sel 21
+ axi_sel 22
+ esai_sel 23
+ asrc_sel 24
+ spdif_sel 25
+ gpu2d_axi 26
+ gpu3d_axi 27
+ gpu2d_core_sel 28
+ gpu3d_core_sel 29
+ gpu3d_shader_sel 30
+ ipu1_sel 31
+ ipu2_sel 32
+ ldb_di0_sel 33
+ ldb_di1_sel 34
+ ipu1_di0_pre_sel 35
+ ipu1_di1_pre_sel 36
+ ipu2_di0_pre_sel 37
+ ipu2_di1_pre_sel 38
+ ipu1_di0_sel 39
+ ipu1_di1_sel 40
+ ipu2_di0_sel 41
+ ipu2_di1_sel 42
+ hsi_tx_sel 43
+ pcie_axi_sel 44
+ ssi1_sel 45
+ ssi2_sel 46
+ ssi3_sel 47
+ usdhc1_sel 48
+ usdhc2_sel 49
+ usdhc3_sel 50
+ usdhc4_sel 51
+ enfc_sel 52
+ emi_sel 53
+ emi_slow_sel 54
+ vdo_axi_sel 55
+ vpu_axi_sel 56
+ cko1_sel 57
+ periph 58
+ periph2 59
+ periph_clk2 60
+ periph2_clk2 61
+ ipg 62
+ ipg_per 63
+ esai_pred 64
+ esai_podf 65
+ asrc_pred 66
+ asrc_podf 67
+ spdif_pred 68
+ spdif_podf 69
+ can_root 70
+ ecspi_root 71
+ gpu2d_core_podf 72
+ gpu3d_core_podf 73
+ gpu3d_shader 74
+ ipu1_podf 75
+ ipu2_podf 76
+ ldb_di0_podf 77
+ ldb_di1_podf 78
+ ipu1_di0_pre 79
+ ipu1_di1_pre 80
+ ipu2_di0_pre 81
+ ipu2_di1_pre 82
+ hsi_tx_podf 83
+ ssi1_pred 84
+ ssi1_podf 85
+ ssi2_pred 86
+ ssi2_podf 87
+ ssi3_pred 88
+ ssi3_podf 89
+ uart_serial_podf 90
+ usdhc1_podf 91
+ usdhc2_podf 92
+ usdhc3_podf 93
+ usdhc4_podf 94
+ enfc_pred 95
+ enfc_podf 96
+ emi_podf 97
+ emi_slow_podf 98
+ vpu_axi_podf 99
+ cko1_podf 100
+ axi 101
+ mmdc_ch0_axi_podf 102
+ mmdc_ch1_axi_podf 103
+ arm 104
+ ahb 105
+ apbh_dma 106
+ asrc 107
+ can1_ipg 108
+ can1_serial 109
+ can2_ipg 110
+ can2_serial 111
+ ecspi1 112
+ ecspi2 113
+ ecspi3 114
+ ecspi4 115
+ ecspi5 116
+ enet 117
+ esai 118
+ gpt_ipg 119
+ gpt_ipg_per 120
+ gpu2d_core 121
+ gpu3d_core 122
+ hdmi_iahb 123
+ hdmi_isfr 124
+ i2c1 125
+ i2c2 126
+ i2c3 127
+ iim 128
+ enfc 129
+ ipu1 130
+ ipu1_di0 131
+ ipu1_di1 132
+ ipu2 133
+ ipu2_di0 134
+ ldb_di0 135
+ ldb_di1 136
+ ipu2_di1 137
+ hsi_tx 138
+ mlb 139
+ mmdc_ch0_axi 140
+ mmdc_ch1_axi 141
+ ocram 142
+ openvg_axi 143
+ pcie_axi 144
+ pwm1 145
+ pwm2 146
+ pwm3 147
+ pwm4 148
+ per1_bch 149
+ gpmi_bch_apb 150
+ gpmi_bch 151
+ gpmi_io 152
+ gpmi_apb 153
+ sata 154
+ sdma 155
+ spba 156
+ ssi1 157
+ ssi2 158
+ ssi3 159
+ uart_ipg 160
+ uart_serial 161
+ usboh3 162
+ usdhc1 163
+ usdhc2 164
+ usdhc3 165
+ usdhc4 166
+ vdo_axi 167
+ vpu_axi 168
+ cko1 169
+ pll1_sys 170
+ pll2_bus 171
+ pll3_usb_otg 172
+ pll4_audio 173
+ pll5_video 174
+ pll6_mlb 175
+ pll7_usb_host 176
+ pll8_enet 177
+ ssi1_ipg 178
+ ssi2_ipg 179
+ ssi3_ipg 180
+ rom 181
+ usbphy1 182
+ usbphy2 183
+ ldb_di0_div_3_5 184
+ ldb_di1_div_3_5 185
+
+Examples:
+
+clks: ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@02020000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
#gpio-cells = <4>;
gpio-controller;
};
+
+
+Samsung S3C24XX GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [flags and pull up/down]
+
+ Values for gpio specifier:
+ - Pin number: depending on the controller a number from 0 up to 15.
+ - Mux function: Depending on the SoC and the gpio bank the gpio can be set
+ as input, output or a special function
+ - Flags and Pull Up/Down: the values to use differ for the individual SoCs
+ example S3C2416/S3C2450:
+ 0 - Pull Up/Down Disabled.
+ 1 - Pull Down Enabled.
+ 2 - Pull Up Enabled.
+ Bit 16 (0x00010000) - Input is active low.
+ Consult the user manual for the correct values of Mux and Pull Up/Down.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+ gpa: gpio-controller@56000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,s3c24xx-gpio";
+ reg = <0x56000000 0x10>;
+ #gpio-cells = <3>;
+ gpio-controller;
+ };
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
Example:
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ ti,use-leds;
};
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
ti,tsc2003 I2C Touch-Screen Controller
+ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
--- /dev/null
+BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
+
+The BCM2835 contains a custom top-level interrupt controller, which supports
+72 interrupt sources using a 2-level register scheme. The interrupt
+controller, or the HW block containing it, is referred to occasionally
+as "armctrl" in the SoC documentation, hence naming of this binding.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-armctrl-ic.txt"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+
+ The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+ pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+ 1/2" register.
+
+ The 2nd cell contains the interrupt number within the bank. Valid values
+ are 0..7 for bank 0, and 0..31 for bank 1.
+
+The interrupt sources are as follows:
+
+Bank 0:
+0: ARM_TIMER
+1: ARM_MAILBOX
+2: ARM_DOORBELL_0
+3: ARM_DOORBELL_1
+4: VPU0_HALTED
+5: VPU1_HALTED
+6: ILLEGAL_TYPE0
+7: ILLEGAL_TYPE1
+
+Bank 1:
+0: TIMER0
+1: TIMER1
+2: TIMER2
+3: TIMER3
+4: CODEC0
+5: CODEC1
+6: CODEC2
+7: VC_JPEG
+8: ISP
+9: VC_USB
+10: VC_3D
+11: TRANSPOSER
+12: MULTICORESYNC0
+13: MULTICORESYNC1
+14: MULTICORESYNC2
+15: MULTICORESYNC3
+16: DMA0
+17: DMA1
+18: VC_DMA2
+19: VC_DMA3
+20: DMA4
+21: DMA5
+22: DMA6
+23: DMA7
+24: DMA8
+25: DMA9
+26: DMA10
+27: DMA11
+28: DMA12
+29: AUX
+30: ARM
+31: VPUDMA
+
+Bank 2:
+0: HOSTPORT
+1: VIDEOSCALER
+2: CCP2TX
+3: SDC
+4: DSI0
+5: AVE
+6: CAM0
+7: CAM1
+8: HDMI0
+9: HDMI1
+10: PIXELVALVE1
+11: I2CSPISLV
+12: DSI1
+13: PWA0
+14: PWA1
+15: CPR
+16: SMI
+17: GPIO0
+18: GPIO1
+19: GPIO2
+20: GPIO3
+21: VC_I2C
+22: VC_SPI
+23: VC_I2SPCM
+24: VC_SDIO
+25: VC_UART
+26: SLIMBUS
+27: VEC
+28: CPG
+29: RNG
+30: VC_ARASANSDIO
+31: AVSPMON
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "brcm,bcm2835-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
--- /dev/null
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+};
--- /dev/null
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+ "jedec,lpddr2-s4"
+
+ "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+
+ "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+
+ "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+
+- density : <u32> representing density in Mb (Mega bits)
+
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+ "lpddr2-timings" provides AC timing parameters of the device for
+ a given speed-bin. The user may provide the timings for as many
+ speed-bins as is required. Please see Documentation/devicetree/
+ bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+
+Example:
+
+elpida_ECB240ABACN : lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+}
--- /dev/null
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+
+Required properties:
+- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+ is the IP revision of the specific EMIF instance.
+
+- phy-type : <u32> indicating the DDR phy type. Following are the
+ allowed values
+ <1> : Attila PHY
+ <2> : Intelli PHY
+
+- device-handle : phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods : For TI hwmods processing and omap device creation
+ the value shall be "emif<n>" where <n> is the number of the EMIF
+ instance with base 1.
+
+Optional properties:
+- cs1-used : Have this property if CS1 of this EMIF
+ instance has a memory part attached to it. If there is a memory
+ part attached to CS1, it should be the same type as the one on CS0,
+ so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs : Have this property if the board has one
+ calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+ supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+ supports dll calibration control
+
+- hw-caps-ll-interface : Have this property if the controller
+ has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert : Have this property if the controller
+ has capability for generating SDRAM temperature alerts
+
+Example:
+
+emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ device-handle = <&elpida_ECB240ABACN>;
+ cs1-used;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+};
--- /dev/null
+PXA3xx NAND DT bindings
+
+Required properties:
+
+ - compatible: Should be "marvell,pxa3xx-nand"
+ - reg: The register base for the controller
+ - interrupts: The interrupt to map
+ - #address-cells: Set to <1> if the node includes partitions
+
+Optional properties:
+
+ - marvell,nand-enable-arbiter: Set to enable the bus arbiter
+ - marvell,nand-keep-config: Set to keep the NAND controller config as set
+ by the bootloader
+ - num-cs: Number of chipselect lines to usw
+
+Example:
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ #address-cells = <1>;
+
+ marvell,nand-enable-arbiter;
+ marvell,nand-keep-config;
+ num-cs = <1>;
+
+ /* partitions (optional) */
+ };
+
- gpio-controller: mark the device as a GPIO controller
- regulators: list of regulators provided by this controller, must have
property "regulator-compatible" to match their hardware counterparts:
- sm[0-2], ldo[0-9] and ldo_rtc
+ sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
- vin-sm0-supply: The input supply for the SM0.
- vin-sm1-supply: The input supply for the SM1.
- vin-sm2-supply: The input supply for the SM2.
Each regulator is defined using the standard binding for regulators.
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+ take care of making proper parent child relationship.
+
Example:
pmu: tps6586x@34 {
#gpio-cells = <2>;
gpio-controller;
+ sys-supply = <&some_reg>;
vin-sm0-supply = <&some_reg>;
vin-sm1-supply = <&some_reg>;
vin-sm2-supply = <&some_reg>;
#address-cells = <1>;
#size-cells = <0>;
- sm0_reg: regulator@0 {
+ sys_reg: regulator@0 {
reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: regulator@1 {
+ reg = <1>;
regulator-compatible = "sm0";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
- sm1_reg: regulator@1 {
- reg = <1>;
+ sm1_reg: regulator@2 {
+ reg = <2>;
regulator-compatible = "sm1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
- sm2_reg: regulator@2 {
- reg = <2>;
+ sm2_reg: regulator@3 {
+ reg = <3>;
regulator-compatible = "sm2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <4550000>;
regulator-always-on;
};
- ldo0_reg: regulator@3 {
- reg = <3>;
+ ldo0_reg: regulator@4 {
+ reg = <4>;
regulator-compatible = "ldo0";
regulator-name = "PCIE CLK";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo1_reg: regulator@4 {
- reg = <4>;
+ ldo1_reg: regulator@5 {
+ reg = <5>;
regulator-compatible = "ldo1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo2_reg: regulator@5 {
- reg = <5>;
+ ldo2_reg: regulator@6 {
+ reg = <6>;
regulator-compatible = "ldo2";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo3_reg: regulator@6 {
- reg = <6>;
+ ldo3_reg: regulator@7 {
+ reg = <7>;
regulator-compatible = "ldo3";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo4_reg: regulator@7 {
- reg = <7>;
+ ldo4_reg: regulator@8 {
+ reg = <8>;
regulator-compatible = "ldo4";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2475000>;
};
- ldo5_reg: regulator@8 {
- reg = <8>;
+ ldo5_reg: regulator@9 {
+ reg = <9>;
regulator-compatible = "ldo5";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo6_reg: regulator@9 {
- reg = <9>;
+ ldo6_reg: regulator@10 {
+ reg = <10>;
regulator-compatible = "ldo6";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo7_reg: regulator@10 {
- reg = <10>;
+ ldo7_reg: regulator@11 {
+ reg = <11>;
regulator-compatible = "ldo7";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo8_reg: regulator@11 {
- reg = <11>;
+ ldo8_reg: regulator@12 {
+ reg = <12>;
regulator-compatible = "ldo8";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo9_reg: regulator@12 {
- reg = <12>;
+ ldo9_reg: regulator@13 {
+ reg = <13>;
regulator-compatible = "ldo9";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
--- /dev/null
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+};
--- /dev/null
+BCM2835 System Timer
+
+The System Timer peripheral provides four 32-bit timer channels and a
+single 64-bit free running counter. Each channel has an output compare
+register, which is compared against the 32 least significant bits of the
+free running counter values, and generates an interrupt.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-system-timer.txt"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupt sinks; one per timer channel.
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7e003000 0x1000>;
+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ clock-frequency = <1000000>;
+};
--- /dev/null
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+ uart1: serial@40014000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40014000 0x1000>;
+ interrupts = <26 0>;
+ };
accesses to the UART (e.g. TI davinci).
- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+ test mode
Example:
arm ARM Ltd.
atmel Atmel Corporation
bosch Bosch Sensortec GmbH
+brcm Broadcom Corporation
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
cortina Cortina Systems, Inc.
* Intel DH89xxCC (PCH)
* Intel Panther Point (PCH)
* Intel Lynx Point (PCH)
+ * Intel Lynx Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
- this file.
README.cycladesZ
- info on Cyclades-Z firmware loading.
-computone.txt
- - info on Computone Intelliport II/Plus Multiport Serial Driver.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
hayes-esp.txt
+++ /dev/null
-NOTE: This is an unmaintained driver. It is not guaranteed to work due to
-changes made in the tty layer in 2.6. If you wish to take over maintenance of
-this driver, contact Michael Warfield <mhw@wittsend.com>.
-
-Changelog:
-----------
-11-01-2001: Original Document
-
-10-29-2004: Minor misspelling & format fix, update status of driver.
- James Nelson <james4765@gmail.com>
-
-Computone Intelliport II/Plus Multiport Serial Driver
------------------------------------------------------
-
-Release Notes For Linux Kernel 2.2 and higher.
-These notes are for the drivers which have already been integrated into the
-kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4.
-
-Version: 1.2.14
-Date: 11/01/2001
-Historical Author: Andrew Manison <amanison@america.net>
-Primary Author: Doug McNash
-
-This file assumes that you are using the Computone drivers which are
-integrated into the kernel sources. For updating the drivers or installing
-drivers into kernels which do not already have Computone drivers, please
-refer to the instructions in the README.computone file in the driver patch.
-
-
-1. INTRODUCTION
-
-This driver supports the entire family of Intelliport II/Plus controllers
-with the exception of the MicroChannel controllers. It does not support
-products previous to the Intelliport II.
-
-This driver was developed on the v2.0.x Linux tree and has been tested up
-to v2.4.14; it will probably not work with earlier v1.X kernels,.
-
-
-2. QUICK INSTALLATION
-
-Hardware - If you have an ISA card, find a free interrupt and io port.
- List those in use with `cat /proc/interrupts` and
- `cat /proc/ioports`. Set the card dip switches to a free
- address. You may need to configure your BIOS to reserve an
- irq for an ISA card. PCI and EISA parameters are set
- automagically. Insert card into computer with the power off
- before or after drivers installation.
-
- Note the hardware address from the Computone ISA cards installed into
- the system. These are required for editing ip2.c or editing
- /etc/modprobe.d/*.conf, or for specification on the modprobe
- command line.
-
- Note that the /etc/modules.conf should be used for older (pre-2.6)
- kernels.
-
-Software -
-
-Module installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
- Select (m) module for CONFIG_COMPUTONE under character
- devices. CONFIG_PCI and CONFIG_MODULES also may need to be set.
-c) Set address on ISA cards then:
- edit /usr/src/linux/drivers/char/ip2.c if needed
- or
- edit config file in /etc/modprobe.d/ if needed (module).
- or both to match this setting.
-d) Run "make modules"
-e) Run "make modules_install"
-f) Run "/sbin/depmod -a"
-g) install driver using `modprobe ip2 <options>` (options listed below)
-h) run ip2mkdev (either the script below or the binary version)
-
-
-Kernel installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
- Select (y) kernel for CONFIG_COMPUTONE under character
- devices. CONFIG_PCI may need to be set if you have PCI bus.
-c) Set address on ISA cards then:
- edit /usr/src/linux/drivers/char/ip2.c
- (Optional - may be specified on kernel command line now)
-d) Run "make zImage" or whatever target you prefer.
-e) mv /usr/src/linux/arch/x86/boot/zImage to /boot.
-f) Add new config for this kernel into /etc/lilo.conf, run "lilo"
- or copy to a floppy disk and boot from that floppy disk.
-g) Reboot using this kernel
-h) run ip2mkdev (either the script below or the binary version)
-
-Kernel command line options:
-
-When compiling the driver into the kernel, io and irq may be
-compiled into the driver by editing ip2.c and setting the values for
-io and irq in the appropriate array. An alternative is to specify
-a command line parameter to the kernel at boot up.
-
- ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
-
-Note that this order is very different from the specifications for the
-modload parameters which have separate IRQ and IO specifiers.
-
-The io port also selects PCI (1) and EISA (2) boards.
-
- io=0 No board
- io=1 PCI board
- io=2 EISA board
- else ISA board io address
-
-You only need to specify the boards which are present.
-
- Examples:
-
- 2 PCI boards:
-
- ip2=1,0,1,0
-
- 1 ISA board at 0x310 irq 5:
-
- ip2=0x310,5
-
-This can be added to and "append" option in lilo.conf similar to this:
-
- append="ip2=1,0,1,0"
-
-
-3. INSTALLATION
-
-Previously, the driver sources were packaged with a set of patch files
-to update the character drivers' makefile and configuration file, and other
-kernel source files. A build script (ip2build) was included which applies
-the patches if needed, and build any utilities needed.
-What you receive may be a single patch file in conventional kernel
-patch format build script. That form can also be applied by
-running patch -p1 < ThePatchFile. Otherwise run ip2build.
-
-The driver can be installed as a module (recommended) or built into the
-kernel. This is selected as for other drivers through the `make config`
-command from the root of the Linux source tree. If the driver is built
-into the kernel you will need to edit the file ip2.c to match the boards
-you are installing. See that file for instructions. If the driver is
-installed as a module the configuration can also be specified on the
-modprobe command line as follows:
-
- modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4
-
-where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11,
-12,15) and addr1-4 are the base addresses for up to four controllers. If
-the irqs are not specified the driver uses the default in ip2.c (which
-selects polled mode). If no base addresses are specified the defaults in
-ip2.c are used. If you are autoloading the driver module with kerneld or
-kmod the base addresses and interrupt number must also be set in ip2.c
-and recompile or just insert and options line in /etc/modprobe.d/*.conf or both.
-The options line is equivalent to the command line and takes precedence over
-what is in ip2.c.
-
-config sample to put /etc/modprobe.d/*.conf:
- options ip2 io=1,0x328 irq=1,10
- alias char-major-71 ip2
- alias char-major-72 ip2
- alias char-major-73 ip2
-
-The equivalent in ip2.c:
-
-static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 };
-
-The equivalent for the kernel command line (in lilo.conf):
-
- append="ip2=1,1,0x328,10"
-
-
-Note: Both io and irq should be updated to reflect YOUR system. An "io"
- address of 1 or 2 indicates a PCI or EISA card in the board table.
- The PCI or EISA irq will be assigned automatically.
-
-Specifying an invalid or in-use irq will default the driver into
-running in polled mode for that card. If all irq entries are 0 then
-all cards will operate in polled mode.
-
-If you select the driver as part of the kernel run :
-
- make zlilo (or whatever you do to create a bootable kernel)
-
-If you selected a module run :
-
- make modules && make modules_install
-
-The utility ip2mkdev (see 5 and 7 below) creates all the device nodes
-required by the driver. For a device to be created it must be configured
-in the driver and the board must be installed. Only devices corresponding
-to real IntelliPort II ports are created. With multiple boards and expansion
-boxes this will leave gaps in the sequence of device names. ip2mkdev uses
-Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
-cuf0 - cuf255 for callout devices.
-
-
-4. USING THE DRIVERS
-
-As noted above, the driver implements the ports in accordance with Linux
-conventions, and the devices should be interchangeable with the standard
-serial devices. (This is a key point for problem reporting: please make
-sure that what you are trying do works on the ttySx/cuax ports first; then
-tell us what went wrong with the ip2 ports!)
-
-Higher speeds can be obtained using the setserial utility which remaps
-38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed.
-Intelliport II installations using the PowerPort expansion module can
-use the custom speed setting to select the highest speeds: 153,600 bps,
-230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for
-custom baud rate configuration is fixed at 921,600 for cards/expansion
-modules with ST654's and 115200 for those with Cirrus CD1400's. This
-corresponds to the maximum bit rates those chips are capable.
-For example if the baud base is 921600 and the baud divisor is 18 then
-the custom rate is 921600/18 = 51200 bps. See the setserial man page for
-complete details. Of course if stty accepts the higher rates now you can
-use that as well as the standard ioctls().
-
-
-5. ip2mkdev and assorted utilities...
-
-Several utilities, including the source for a binary ip2mkdev utility are
-available under .../drivers/char/ip2. These can be build by changing to
-that directory and typing "make" after the kernel has be built. If you do
-not wish to compile the binary utilities, the shell script below can be
-cut out and run as "ip2mkdev" to create the necessary device files. To
-use the ip2mkdev script, you must have procfs enabled and the proc file
-system mounted on /proc.
-
-
-6. NOTES
-
-This is a release version of the driver, but it is impossible to test it
-in all configurations of Linux. If there is any anomalous behaviour that
-does not match the standard serial port's behaviour please let us know.
-
-
-7. ip2mkdev shell script
-
-Previously, this script was simply attached here. It is now attached as a
-shar archive to make it easier to extract the script from the documentation.
-To create the ip2mkdev shell script change to a convenient directory (/tmp
-works just fine) and run the following command:
-
- unshar Documentation/serial/computone.txt
- (This file)
-
-You should now have a file ip2mkdev in your current working directory with
-permissions set to execute. Running that script with then create the
-necessary devices for the Computone boards, interfaces, and ports which
-are present on you system at the time it is run.
-
-
-#!/bin/sh
-# This is a shell archive (produced by GNU sharutils 4.2.1).
-# To extract the files from this archive, save it to some FILE, remove
-# everything before the `!/bin/sh' line above, then type `sh FILE'.
-#
-# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>.
-# Source directory was `/home2/src/tmp'.
-#
-# Existing files will *not* be overwritten unless `-c' is specified.
-#
-# This shar contains:
-# length mode name
-# ------ ---------- ------------------------------------------
-# 4251 -rwxr-xr-x ip2mkdev
-#
-save_IFS="${IFS}"
-IFS="${IFS}:"
-gettext_dir=FAILED
-locale_dir=FAILED
-first_param="$1"
-for dir in $PATH
-do
- if test "$gettext_dir" = FAILED && test -f $dir/gettext \
- && ($dir/gettext --version >/dev/null 2>&1)
- then
- set `$dir/gettext --version 2>&1`
- if test "$3" = GNU
- then
- gettext_dir=$dir
- fi
- fi
- if test "$locale_dir" = FAILED && test -f $dir/shar \
- && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
- then
- locale_dir=`$dir/shar --print-text-domain-dir`
- fi
-done
-IFS="$save_IFS"
-if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
-then
- echo=echo
-else
- TEXTDOMAINDIR=$locale_dir
- export TEXTDOMAINDIR
- TEXTDOMAIN=sharutils
- export TEXTDOMAIN
- echo="$gettext_dir/gettext -s"
-fi
-if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then
- shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
-elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
- shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
-elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then
- shar_touch='touch -am $3$4$5$6$2 "$8"'
-else
- shar_touch=:
- echo
- $echo 'WARNING: not restoring timestamps. Consider getting and'
- $echo "installing GNU \`touch', distributed in GNU File Utilities..."
- echo
-fi
-rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
-#
-if mkdir _sh17581; then
- $echo 'x -' 'creating lock directory'
-else
- $echo 'failed to create lock directory'
- exit 1
-fi
-# ============= ip2mkdev ==============
-if test -f 'ip2mkdev' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
-else
- $echo 'x -' extracting 'ip2mkdev' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
-#!/bin/sh -
-#
-# ip2mkdev
-#
-# Make or remove devices as needed for Computone Intelliport drivers
-#
-# First rule! If the dev file exists and you need it, don't mess
-# with it. That prevents us from screwing up open ttys, ownership
-# and permissions on a running system!
-#
-# This script will NOT remove devices that no longer exist if their
-# board or interface box has been removed. If you want to get rid
-# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*"
-# before running this script. Running this script will then recreate
-# all the valid devices.
-#
-# Michael H. Warfield
-# /\/\|=mhw=|\/\/
-# mhw@wittsend.com
-#
-# Updated 10/29/2000 for version 1.2.13 naming convention
-# under devfs. /\/\|=mhw=|\/\/
-#
-# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/
-#
-X
-if test -d /dev/ip2 ; then
-# This is devfs mode... We don't do anything except create symlinks
-# from the real devices to the old names!
-X cd /dev
-X echo "Creating symbolic links to devfs devices"
-X for i in `ls ip2` ; do
-X if test ! -L ip2$i ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f ip2$i
-X ln -s ip2/$i ip2$i
-X fi
-X done
-X for i in `( cd tts ; ls F* )` ; do
-X if test ! -L tty$i ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f tty$i
-X ln -s tts/$i tty$i
-X fi
-X done
-X for i in `( cd cua ; ls F* )` ; do
-X DEVNUMBER=`expr $i : 'F\(.*\)'`
-X if test ! -L cuf$DEVNUMBER ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f cuf$DEVNUMBER
-X ln -s cua/$i cuf$DEVNUMBER
-X fi
-X done
-X exit 0
-fi
-X
-if test ! -f /proc/tty/drivers
-then
-X echo "\
-Unable to check driver status.
-Make sure proc file system is mounted."
-X
-X exit 255
-fi
-X
-if test ! -f /proc/tty/driver/ip2
-then
-X echo "\
-Unable to locate ip2 proc file.
-Attempting to load driver"
-X
-X if /sbin/insmod ip2
-X then
-X if test ! -f /proc/tty/driver/ip2
-X then
-X echo "\
-Unable to locate ip2 proc file after loading driver.
-Driver initialization failure or driver version error.
-"
-X exit 255
-X fi
-X else
-X echo "Unable to load ip2 driver."
-X exit 255
-X fi
-fi
-X
-# Ok... So we got the driver loaded and we can locate the procfs files.
-# Next we need our major numbers.
-X
-TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
-CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
-BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2`
-X
-echo "\
-TTYMAJOR = $TTYMAJOR
-CUAMAJOR = $CUAMAJOR
-BRDMAJOR = $BRDMAJOR
-"
-X
-# Ok... Now we should know our major numbers, if appropriate...
-# Now we need our boards and start the device loops.
-X
-grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
-do
-X # The test for blank "type" will catch the stats lead-in lines
-X # if they exist in the file
-X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
-X then
-X continue
-X fi
-X
-X BOARDNO=`expr "$number" : '\([0-9]\):'`
-X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
-X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
-X
-X if test "$BOARDNO" = "" -o "$PORTS" = ""
-X then
-# This may be a bug. We should at least get this much information
-X echo "Unable to process board line"
-X continue
-X fi
-X
-X if test "$MINORS" = ""
-X then
-# Silently skip this one. This board seems to have no boxes
-X continue
-X fi
-X
-X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
-X
-X if test "$BRDMAJOR" != ""
-X then
-X BRDMINOR=`expr $BOARDNO \* 4`
-X STSMINOR=`expr $BRDMINOR + 1`
-X if test ! -c /dev/ip2ipl$BOARDNO ; then
-X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
-X fi
-X if test ! -c /dev/ip2stat$BOARDNO ; then
-X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
-X fi
-X fi
-X
-X if test "$TTYMAJOR" != ""
-X then
-X PORTNO=$BOARDBASE
-X
-X for PORTNO in $MINORS
-X do
-X if test ! -c /dev/ttyF$PORTNO ; then
-X # We got the hardware but no device - make it
-X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
-X fi
-X done
-X fi
-X
-X if test "$CUAMAJOR" != ""
-X then
-X PORTNO=$BOARDBASE
-X
-X for PORTNO in $MINORS
-X do
-X if test ! -c /dev/cuf$PORTNO ; then
-X # We got the hardware but no device - make it
-X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
-X fi
-X done
-X fi
-done
-X
-Xexit 0
-SHAR_EOF
- (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") &&
- chmod 0755 'ip2mkdev' ||
- $echo 'restore of' 'ip2mkdev' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'ip2mkdev:' 'MD5 check failed'
-cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
- test 4251 -eq "$shar_count" ||
- $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!"
- fi
-fi
-rm -fr _sh17581
-exit 0
#include <linux/gpio.h>
#include <linux/spi/spi.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/spi-ep93xx.h>
/* this is our GPIO line used for chip select */
#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9
S: Maintained
F: arch/arm/kernel/perf_event*
F: arch/arm/oprofile/common.c
-F: arch/arm/kernel/pmu.c
F: arch/arm/include/asm/pmu.h
F: arch/arm/kernel/hw_breakpoint.c
F: arch/arm/include/asm/hw_breakpoint.h
S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
+BROADCOM BCM2835 ARM ARCHICTURE
+M: Stephen Warren <swarren@wwwdotorg.org>
+L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+S: Maintained
+F: arch/arm/mach-bcm2835/
+F: arch/arm/boot/dts/bcm2835*
+F: arch/arm/configs/bcm2835_defconfig
+F: drivers/*/*bcm2835*
+
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.fluff.org/bjdooks/linux.git
+T: git git://git.pengutronix.de/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
VERSION = 3
PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
driver->subtype = SYSTEM_TYPE_SYSCONS;
driver->init_termios = tty_std_termios;
tty_set_operations(driver, &srmcons_ops);
+ tty_port_link_device(&srmcons_singleton.port, driver, 0);
err = tty_register_driver(driver);
if (err) {
put_tty_driver(driver);
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_GPIO_H
+ bool
+ help
+ Select this when mach/gpio.h is required to provide special
+ definitions for this platform. The need for mach/gpio.h should
+ be avoided when possible.
+
config NEED_MACH_IO_H
bool
help
#
choice
prompt "ARM system type"
- default ARCH_VERSATILE
+ default ARCH_MULTIPLATFORM
-config ARCH_SOCFPGA
- bool "Altera SOCFPGA family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_GIC
- select CACHE_L2X0
- select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+ bool "Allow multiple platforms to be selected"
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
select COMMON_CLK
- select CPU_V7
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GPIO_PL061 if GPIOLIB
- select HAVE_ARM_SCU
+ select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
- help
- This enables support for Altera SOCFPGA Cyclone V platform
+ depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
select COMMON_CLK
- select CLK_VERSATILE
+ select COMMON_CLK_VERSATILE
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
- select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
- select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
help
This enables support for ARM Ltd Versatile board.
-config ARCH_VEXPRESS
- bool "ARM Ltd. Versatile Express family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select HAVE_PATA_PLATFORM
- select ICST
- select NO_IOPORT
- select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- This enables support for the ARM Ltd Versatile Express boards.
-
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
help
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
-config ARCH_BCMRING
- bool "Broadcom BCMRING"
- depends on MMU
- select CPU_V6
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V6
select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
help
- Support for Broadcom's BCMRing platform.
+ This enables support for the Broadcom BCM2835 SoC. This SoC is
+ use in the Raspberry Pi, and Roku 2 devices.
-config ARCH_HIGHBANK
- bool "Calxeda Highbank-based"
- select ARCH_WANT_OPTIONAL_GPIOLIB
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
select ARM_AMBA
- select ARM_GIC
select ARM_TIMER_SP804
- select CACHE_L2X0
select CLKDEV_LOOKUP
- select COMMON_CLK
- select CPU_V7
select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU
- select HAVE_SMP
- select SPARSE_IRQ
- select USE_OF
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
- Support for the Calxeda Highbank SoC based boards.
+ Support for Broadcom's BCMRing platform.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
help
Support for the Cortina Systems Gemini family SoCs
-config ARCH_PRIMA2
- bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
- select CPU_V7
+config ARCH_SIRF
+ bool "CSR SiRF"
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_SIRF
select USE_OF
- select ZONE_DMA
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFprimaII/Marco/Polo platforms
config ARCH_EBSA110
bool "EBSA-110"
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
- select NEED_MACH_IO_H
+ select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
- select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
help
Support for Intel's IXP4XX (XScale) family of processors.
-config ARCH_MVEBU
- bool "Marvell SOCs with Device Tree support"
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- select CLKSRC_MMIO
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- select COMMON_CLK
- help
- Support for the Marvell SoC Family with device tree support
-
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
- select NEED_MACH_IO_H
select PLAT_ORION
select USB_ARCH_HAS_EHCI
help
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Kirkwood series SoCs:
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell MV78xx0 series SoCs:
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
select PLAT_PXA
select SPARSE_IRQ
select GENERIC_ALLOCATOR
+ select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
bool "Micrel/Kendin KS8695"
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
select USE_OF
+ select COMMON_CLK
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
-config ARCH_PICOXCELL
- bool "Picochip picoXcell"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
- select ARM_VIC
- select CPU_V6K
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
- select HAVE_TCM
- select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
- help
- This enables support for systems based on the Picochip picoXcell
- family of Femtocell devices. The picoxcell support requires device tree
- for all boards.
-
-config ARCH_PNX4008
- bool "Philips Nexperia PNX4008 Mobile"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- select ARCH_USES_GETTIMEOFFSET
- help
- This enables support for Philips PNX4008 mobile platform.
-
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select MULTI_IRQ_HANDLER
select ARM_CPU_SUSPEND if PM
select HAVE_IDE
+ select NEED_MACH_GPIO_H
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S3C64XX series based systems
select GENERIC_CLOCKEVENTS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
+ select NEED_MACH_GPIO_H
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
select PCI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
- select NEED_MACH_IO_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
select COMMON_CLK
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select SPARSE_IRQ
help
Support for ST-Ericsson U300 series mobile platforms.
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's DaVinci platform.
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
+menu "Multiple platform selection"
+ depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+ bool "ARMv4 based platforms (FA526, StrongARM)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4T
+ bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V5
+ bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4_V5
+ bool
+
+config ARCH_MULTI_V6
+ bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ select CPU_V6
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V7
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ select CPU_V7
+ select ARCH_VEXPRESS
+ default y
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V6_V7
+ bool
+
+config ARCH_MULTI_CPU_AUTO
+ def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+ select ARCH_MULTI_V5
+
+endmenu
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-highbank/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-picoxcell/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/mach-socfpga/Kconfig"
+
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
+source "arch/arm/mach-prima2/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
depends on CPU_XSCALE
default y
-config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
- (!ARCH_OMAP3 || OMAP3_EMU)
- default y
- bool
-
config MULTI_IRQ_HANDLER
bool
help
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU
+ depends on PERF_EVENTS
default y
help
Enable hardware performance counter support for perf events. If
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM && !ARM_LPAE
+ depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_MVEBU_UART
+ bool "Kernel low-level debugging messages via MVEBU UART"
+ depends on ARCH_MVEBU
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms.
+
+ config DEBUG_PICOXCELL_UART
+ depends on ARCH_PICOXCELL
+ bool "Use PicoXcell UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on PicoXcell based platforms.
+
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_SOCFPGA_UART
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA based platforms.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
+ depends on !ARCH_MULTIPLATFORM
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
- bool "Kernel low-level debug output via semihosting I"
+ bool "Kernel low-level debug output via semihosting I/O"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
- simple SVC calls. The host debugger or emulator must have
+ simple SVC call. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
- This is known to work with OpenOCD, as wellas
+ This is known to work with OpenOCD, as well as
ARM's Fast Models, or any other controlling environment
that implements semihosting.
endchoice
+config DEBUG_LL_INCLUDE
+ string
+ default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+ default "debug/mvebu.S" if DEBUG_MVEBU_UART
+ default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+ default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+ default "mach/debug-macro.S"
+
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AT91) := at91
-machine-$(CONFIG_ARCH_BCMRING) := bcmring
-machine-$(CONFIG_ARCH_CLPS711X) := clps711x
-machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI) := davinci
-machine-$(CONFIG_ARCH_DOVE) := dove
-machine-$(CONFIG_ARCH_EBSA110) := ebsa110
-machine-$(CONFIG_ARCH_EP93XX) := ep93xx
-machine-$(CONFIG_ARCH_GEMINI) := gemini
-machine-$(CONFIG_ARCH_H720X) := h720x
-machine-$(CONFIG_ARCH_HIGHBANK) := highbank
-machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
-machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
-machine-$(CONFIG_ARCH_IOP32X) := iop32x
-machine-$(CONFIG_ARCH_IOP33X) := iop33x
-machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
-machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
-machine-$(CONFIG_ARCH_MMP) := mmp
-machine-$(CONFIG_ARCH_MSM) := msm
-machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
-machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MXS) := mxs
-machine-$(CONFIG_ARCH_MVEBU) := mvebu
-machine-$(CONFIG_ARCH_NETX) := netx
-machine-$(CONFIG_ARCH_NOMADIK) := nomadik
-machine-$(CONFIG_ARCH_OMAP1) := omap1
-machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
-machine-$(CONFIG_ARCH_ORION5X) := orion5x
-machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
-machine-$(CONFIG_ARCH_PNX4008) := pnx4008
-machine-$(CONFIG_ARCH_PRIMA2) := prima2
-machine-$(CONFIG_ARCH_PXA) := pxa
-machine-$(CONFIG_ARCH_REALVIEW) := realview
-machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
-machine-$(CONFIG_ARCH_S5PC100) := s5pc100
-machine-$(CONFIG_ARCH_S5PV210) := s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4) := exynos
-machine-$(CONFIG_ARCH_EXYNOS5) := exynos
-machine-$(CONFIG_ARCH_SA1100) := sa1100
-machine-$(CONFIG_ARCH_SHARK) := shark
-machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TEGRA) := tegra
-machine-$(CONFIG_ARCH_U300) := u300
-machine-$(CONFIG_ARCH_U8500) := ux500
-machine-$(CONFIG_ARCH_VERSATILE) := versatile
-machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
-machine-$(CONFIG_ARCH_VT8500) := vt8500
-machine-$(CONFIG_ARCH_W90X900) := w90x900
-machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_SOCFPGA) := socfpga
-machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
-machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
-machine-$(CONFIG_MACH_SPEAR300) := spear3xx
-machine-$(CONFIG_MACH_SPEAR310) := spear3xx
-machine-$(CONFIG_MACH_SPEAR320) := spear3xx
-machine-$(CONFIG_MACH_SPEAR600) := spear6xx
-machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_BCM2835) += bcm2835
+machine-$(CONFIG_ARCH_BCMRING) += bcmring
+machine-$(CONFIG_ARCH_CLPS711X) += clps711x
+machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
+machine-$(CONFIG_ARCH_DAVINCI) += davinci
+machine-$(CONFIG_ARCH_DOVE) += dove
+machine-$(CONFIG_ARCH_EBSA110) += ebsa110
+machine-$(CONFIG_ARCH_EP93XX) += ep93xx
+machine-$(CONFIG_ARCH_GEMINI) += gemini
+machine-$(CONFIG_ARCH_H720X) += h720x
+machine-$(CONFIG_ARCH_HIGHBANK) += highbank
+machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
+machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
+machine-$(CONFIG_ARCH_IOP32X) += iop32x
+machine-$(CONFIG_ARCH_IOP33X) += iop33x
+machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
+machine-$(CONFIG_ARCH_KS8695) += ks8695
+machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
+machine-$(CONFIG_ARCH_MMP) += mmp
+machine-$(CONFIG_ARCH_MSM) += msm
+machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
+machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MXS) += mxs
+machine-$(CONFIG_ARCH_MVEBU) += mvebu
+machine-$(CONFIG_ARCH_NETX) += netx
+machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_OMAP1) += omap1
+machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
+machine-$(CONFIG_ARCH_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
+machine-$(CONFIG_ARCH_PRIMA2) += prima2
+machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_REALVIEW) += realview
+machine-$(CONFIG_ARCH_RPC) += rpc
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
+machine-$(CONFIG_ARCH_S5PC100) += s5pc100
+machine-$(CONFIG_ARCH_S5PV210) += s5pv210
+machine-$(CONFIG_ARCH_EXYNOS) += exynos
+machine-$(CONFIG_ARCH_SA1100) += sa1100
+machine-$(CONFIG_ARCH_SHARK) += shark
+machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_TEGRA) += tegra
+machine-$(CONFIG_ARCH_U300) += u300
+machine-$(CONFIG_ARCH_U8500) += ux500
+machine-$(CONFIG_ARCH_VERSATILE) += versatile
+machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
+machine-$(CONFIG_ARCH_VT8500) += vt8500
+machine-$(CONFIG_ARCH_W90X900) += w90x900
+machine-$(CONFIG_FOOTBRIDGE) += footbridge
+machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
+machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
+machine-$(CONFIG_MACH_SPEAR600) += spear6xx
+machine-$(CONFIG_ARCH_ZYNQ) += zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC) := mxc
-plat-$(CONFIG_ARCH_OMAP) := omap
-plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_ZYNQ) := versatile
-plat-$(CONFIG_PLAT_IOP) := iop
-plat-$(CONFIG_PLAT_NOMADIK) := nomadik
-plat-$(CONFIG_PLAT_ORION) := orion
-plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P) := samsung
-plat-$(CONFIG_PLAT_SPEAR) := spear
-plat-$(CONFIG_PLAT_VERSATILE) := versatile
+plat-$(CONFIG_ARCH_MXC) += mxc
+plat-$(CONFIG_ARCH_OMAP) += omap
+plat-$(CONFIG_ARCH_S3C64XX) += samsung
+plat-$(CONFIG_ARCH_ZYNQ) += versatile
+plat-$(CONFIG_PLAT_IOP) += iop
+plat-$(CONFIG_PLAT_NOMADIK) += nomadik
+plat-$(CONFIG_PLAT_ORION) += orion
+plat-$(CONFIG_PLAT_PXA) += pxa
+plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P) += samsung
+plat-$(CONFIG_PLAT_SPEAR) += spear
+plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
else
MACHINE :=
endif
+ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+MACHINE :=
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
+endif
export TEXT_OFFSET GZFLAGS MMUEXT
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb:
+%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-dtbs:
+dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
include $(srctree)/$(MACHINE)/Makefile.boot
endif
+include $(srctree)/arch/arm/boot/dts/Makefile
+
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
+ mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
+ bic r6, r6, #1 << 31 @ 32-bit translation system
+ bic r6, r6, #3 << 0 @ use only ttbr0
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
#endif
mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
static void putstr(const char *ptr);
extern void error(char *x);
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
#include <mach/uncompress.h>
+#endif
#ifdef CONFIG_DEBUG_ICEDCC
--- /dev/null
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+ at91sam9263ek.dtb \
+ at91sam9g20ek_2mmc.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9m10g45ek.dtb \
+ at91sam9n12ek.dtb \
+ ethernut5.dtb \
+ evk-pro3.dtb \
+ kizbox.dtb \
+ tny_a9260.dtb \
+ tny_a9263.dtb \
+ tny_a9g20.dtb \
+ usb_a9260.dtb \
+ usb_a9263.dtb \
+ usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
+ exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dreamplug.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-ib62x0.dtb \
+ kirkwood-iconnect.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-ts219-6281.dtb \
+ kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+ msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+ armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
+ imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+ imx23-olinuxino.dtb \
+ imx23-stmp378x_devb.dtb \
+ imx28-apx4devkit.dtb \
+ imx28-cfa10036.dtb \
+ imx28-cfa10049.dtb \
+ imx28-evk.dtb \
+ imx28-m28evk.dtb \
+ imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap3-beagle-xm.dtb \
+ omap3-evm.dtb \
+ omap3-tobi.dtb \
+ omap4-panda.dtb \
+ omap4-pandaES.dtb \
+ omap4-var_som.dtb \
+ omap4-sdp.dtb \
+ omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ r8a7740-armadillo800eva.dtb \
+ sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+ spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+ spear310-evb.dtb \
+ spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-medcom-wide.dtb \
+ tegra20-paz00.dtb \
+ tegra20-plutux.dtb \
+ tegra20-seaboard.dtb \
+ tegra20-tec.dtb \
+ tegra20-trimslice.dtb \
+ tegra20-ventana.dtb \
+ tegra20-whistler.dtb \
+ tegra30-cardhu-a02.dtb \
+ tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+ vexpress-v2p-ca9.dtb \
+ vexpress-v2p-ca15-tc1.dtb \
+ vexpress-v2p-ca15_a7.dtb
+
+endif
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ };
+ };
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-always-on;
+ };
+ };
};
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+ };
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-always-on;
+ };
+ };
};
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x44e07000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <96>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x4804c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <98>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ac000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ae000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <62>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ reg = <0x44e09000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <72>;
+ status = "disabled";
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ reg = <0x48022000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <73>;
+ status = "disabled";
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ reg = <0x48024000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <74>;
+ status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ reg = <0x481a6000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <44>;
+ status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ reg = <0x481a8000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <45>;
+ status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ reg = <0x481aa000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <46>;
+ status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ reg = <0x44e0b000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <70>;
+ status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <71>;
+ status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ reg = <0x4819c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+ status = "disabled";
};
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
+ reg = <0x44e35000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <91>;
};
};
};
--- /dev/null
+/dts-v1/;
+/memreserve/ 0x0c000000 0x04000000;
+/include/ "bcm2835.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-b", "brcm,bcm2835";
+ model = "Raspberry Pi Model B";
+
+ memory {
+ reg = <0 0x10000000>;
+ };
+};
--- /dev/null
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm2835";
+ model = "BCM2835";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ bootargs = "earlyprintk console=ttyAMA0";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x7e000000 0x20000000 0x02000000>;
+
+ timer {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7e003000 0x1000>;
+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ clock-frequency = <1000000>;
+ };
+
+ intc: interrupt-controller {
+ compatible = "brcm,bcm2835-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart@20201000 {
+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ reg = <0x7e201000 0x1000>;
+ interrupts = <2 25>;
+ clock-frequency = <3000000>;
+ };
+ };
+};
#size-cells = <0>;
autorepeat;
button@21 {
- label = "GPIO Key UP";
+ label = "Interrupt Key";
linux,code = <103>;
gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
};
+ key1 {
+ label = "KEY1";
+ linux,code = <1>;
+ gpios = <&pca9532 0 0>;
+ };
+ key2 {
+ label = "KEY2";
+ linux,code = <2>;
+ gpios = <&pca9532 1 0>;
+ };
+ key3 {
+ label = "KEY3";
+ linux,code = <3>;
+ gpios = <&pca9532 2 0>;
+ };
+ key4 {
+ label = "KEY4";
+ linux,code = <4>;
+ gpios = <&pca9532 3 0>;
+ };
+ joy0 {
+ label = "Joystick Key 0";
+ linux,code = <10>;
+ gpios = <&gpio 2 0 0>; /* P2.0 */
+ };
+ joy1 {
+ label = "Joystick Key 1";
+ linux,code = <11>;
+ gpios = <&gpio 2 1 0>; /* P2.1 */
+ };
+ joy2 {
+ label = "Joystick Key 2";
+ linux,code = <12>;
+ gpios = <&gpio 2 2 0>; /* P2.2 */
+ };
+ joy3 {
+ label = "Joystick Key 3";
+ linux,code = <13>;
+ gpios = <&gpio 2 3 0>; /* P2.3 */
+ };
+ joy4 {
+ label = "Joystick Key 4";
+ linux,code = <14>;
+ gpios = <&gpio 2 4 0>; /* P2.4 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* LEDs on OEM Board */
+
+ led1 {
+ gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio 2 10 1>; /* P2.10, active low */
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio 2 11 1>; /* P2.11, active low */
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio 2 12 1>; /* P2.12, active low */
+ default-state = "off";
+ };
+
+ /* LEDs on Base Board */
+
+ lede1 {
+ gpios = <&pca9532 8 0>;
+ default-state = "off";
+ };
+ lede2 {
+ gpios = <&pca9532 9 0>;
+ default-state = "off";
+ };
+ lede3 {
+ gpios = <&pca9532 10 0>;
+ default-state = "off";
+ };
+ lede4 {
+ gpios = <&pca9532 11 0>;
+ default-state = "off";
+ };
+ lede5 {
+ gpios = <&pca9532 12 0>;
+ default-state = "off";
+ };
+ lede6 {
+ gpios = <&pca9532 13 0>;
+ default-state = "off";
+ };
+ lede7 {
+ gpios = <&pca9532 14 0>;
+ default-state = "off";
+ };
+ lede8 {
+ gpios = <&pca9532 15 0>;
+ default-state = "off";
+ };
};
};
--- /dev/null
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
bus-width = <4>;
status = "okay";
};
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+ 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
};
apbx@80040000 {
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ auart0: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+ gpio = <&gpio0 17 0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "green";
+ gpios = <&gpio2 1 0>;
+ linux,default-trigger = "default-on";
};
};
};
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 0x2000>;
+ clocks = <&clks 15>;
};
ecc@80008000 {
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 34>;
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15 14>;
+ clocks = <&clks 33>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
fsl,pull-up = <0>;
};
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+ 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
- 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,drive-strength = <1>;
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 0x2000>;
+ clocks = <&clks 16>;
};
dcp@80028000 {
compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
interrupts = <46 45>;
+ clocks = <&clks 38>;
status = "disabled";
};
ssp1: ssp@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2 20>;
+ clocks = <&clks 33>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
reg = <0x80040000 0x40000>;
ranges;
- clkctl@80040000 {
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
- status = "disabled";
+ #clock-cells = <1>;
};
saif0: saif@80042000 {
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
+ clocks = <&clks 30>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
+ clocks = <&clks 32>;
status = "disabled";
};
compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <59 60 58>;
+ clocks = <&clks 32>;
status = "disabled";
};
compatible = "arm,pl011", "arm,primecell";
reg = <0x80070000 0x2000>;
interrupts = <0>;
+ clocks = <&clks 32>, <&clks 16>;
+ clock-names = "uart", "apb_pclk";
status = "disabled";
};
- usbphy@8007c000 {
+ usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
+ clocks = <&clks 41>;
status = "disabled";
};
};
reg = <0x80080000 0x80000>;
ranges;
- usbctrl@80080000 {
+ usb0: usb@80080000 {
+ compatible = "fsl,imx23-usb", "fsl,imx27-usb";
reg = <0x80080000 0x40000>;
+ interrupts = <11>;
+ fsl,usbphy = <&usbphy0>;
+ clocks = <&clks 40>;
status = "disabled";
};
};
soc {
aipi@10000000 { /* aipi */
- wdog@10002000 {
- status = "okay";
- };
-
serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
i2c@1001d000 {
clock-frequency = <400000>;
status = "okay";
- at24@4c {
+ at24@52 {
compatible = "at,24c32";
pagesize = <32>;
reg = <0x52>;
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x4000>;
interrupts = <27>;
- status = "disabled";
};
uart1: serial@1000a000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
--- /dev/null
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10049 Board";
+ compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ spi3_pins_cfa10049: spi3-cfa10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+
+ ssp3: ssp@80016000 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins_cfa10049>;
+ status = "okay";
+
+ gpio5: gpio5@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+
+ gpio6: gpio6@1 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <1>;
+ registers-number = <4>;
+ spi-max-frequency = <100000>;
+ };
+
+ };
+ };
+
+ apbx@80040000 {
+ i2c1: i2c@8005a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+};
wp-gpios = <&gpio0 28 0>;
};
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
status = "okay";
};
+ lradc@80050000 {
+ status = "okay";
+ };
+
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
VDDIO-supply = <®_3p3v>;
};
+
+ at24@51 {
+ compatible = "at24,24c32";
+ pagesize = <32>;
+ reg = <0x51>;
+ };
};
pwm: pwm@80064000 {
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
&mmc0_cd_cfg
&mmc0_sck_cfg>;
bus-width = <8>;
- wp-gpios = <&gpio3 10 1>;
+ wp-gpios = <&gpio3 10 0>;
+ vmmc-supply = <®_vddio_sd0>;
status = "okay";
};
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+ 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+ 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
};
};
+ lradc@80050000 {
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
- auart0: serial@8006a000 {
- pinctrl-names = "default";
- pinctrl-0 = <&auart0_2pins_a>;
+ usbphy0: usbphy@8007c000 {
status = "okay";
};
- auart3: serial@80070000 {
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
pinctrl-names = "default";
- pinctrl-0 = <&auart3_pins_a>;
+ pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy0_pins_a>;
+ status = "okay";
+ };
+
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy1_pins_a>;
+ status = "okay";
+ };
+
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio3 11 0>;
status = "okay";
};
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 12 0>;
+ };
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 13 0>;
+ };
};
sound {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ mac0_pins_gpio: mac0-gpio-mode@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+ 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+ 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+ 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+ 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+ 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+ 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+ 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+ 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio_mode";
pinctrl-0 = <&mac0_pins_a>;
+ pinctrl-1 = <&mac0_pins_gpio>;
status = "okay";
};
};
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
};
cpus {
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 0x2000>;
+ clocks = <&clks 25>;
};
perfmon@80006000 {
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 50>;
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80010000 0x2000>;
interrupts = <96 82>;
+ clocks = <&clks 46>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80012000 0x2000>;
interrupts = <97 83>;
+ clocks = <&clks 47>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80014000 0x2000>;
interrupts = <98 84>;
+ clocks = <&clks 48>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80016000 0x2000>;
interrupts = <99 85>;
+ clocks = <&clks 49>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
fsl,pull-up = <1>;
};
+ i2c0_pins_b: i2c0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+ 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+ 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids = <
fsl,pull-up = <0>;
};
+ pwm4_pins_a: pwm4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+ 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+ 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+ 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ usbphy0_pins_a: usbphy0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ usbphy0_pins_b: usbphy0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ usbphy1_pins_a: usbphy1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
digctl@8001c000 {
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 0x2000>;
+ clocks = <&clks 26>;
};
dcp@80028000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 0x2000>;
interrupts = <38 86>;
+ clocks = <&clks 55>;
status = "disabled";
};
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80032000 0x2000>;
interrupts = <8>;
+ clocks = <&clks 58>, <&clks 58>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80034000 0x2000>;
interrupts = <9>;
+ clocks = <&clks 59>, <&clks 59>;
+ clock-names = "ipg", "per";
status = "disabled";
};
reg = <0x80040000 0x40000>;
ranges;
- clkctl@80040000 {
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
- status = "disabled";
+ #clock-cells = <1>;
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
+ clocks = <&clks 53>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
compatible = "fsl,imx28-saif";
reg = <0x80046000 0x2000>;
interrupts = <58 81>;
+ clocks = <&clks 54>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
+ compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
+ interrupts = <10 14 15 16 17 18 19
+ 20 21 22 23 24 25>;
status = "disabled";
};
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
+ clocks = <&clks 44>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
+ clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
+ clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
+ clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
+ clocks = <&clks 45>;
status = "disabled";
};
compatible = "arm,pl011", "arm,primecell";
reg = <0x80074000 0x1000>;
interrupts = <47>;
+ clocks = <&clks 45>, <&clks 26>;
+ clock-names = "uart", "apb_pclk";
status = "disabled";
};
usbphy0: usbphy@8007c000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
+ clocks = <&clks 62>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
+ clocks = <&clks 63>;
status = "disabled";
};
};
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
interrupts = <93>;
+ clocks = <&clks 60>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
interrupts = <92>;
+ clocks = <&clks 61>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
compatible = "fsl,imx28-fec";
reg = <0x800f4000 0x4000>;
interrupts = <102>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
uart3: serial@7000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@70010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
};
};
- wdog@73f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@73fa8000 {
- compatible = "fsl,imx51-iomuxc-babbage";
- reg = <0x73fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
+ 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
+ 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
+ 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
+ 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
+ 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+ 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+ >;
+ };
+ };
};
uart1: serial@73fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
fsl,uart-has-rtscts;
status = "okay";
};
uart2: serial@73fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@80000000 { /* aips-2 */
- sdma@83fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
- };
-
i2c@83fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
};
audmux@83fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@83fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "mii";
status = "okay";
};
};
};
+ usb@73f80000 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@73f80200 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@73f80400 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@73f80600 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f84000 0x4000>;
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@73f9c000 { /* WDOG2 */
status = "disabled";
};
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc";
+ reg = <0x73fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+ 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+ 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+ 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */
+ 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+ 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+ 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+ 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */
+ 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */
+ 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */
+ 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+ 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+ 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+ 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+ 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */
+ 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+ 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+ 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+ 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+ 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+ 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */
+ 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */
+ 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+ 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+ 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+ 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */
+ 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */
+ 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+ 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+ 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+ 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */
+ 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */
+ 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */
+ 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */
+ 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */
+ 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */
+ 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */
+ 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */
+ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
cspi@83fc0000 {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-ard";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
+ 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
+ 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
+ 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
+ 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+ 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+ 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+ 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+ 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+ 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+ 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+ 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+ 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+ 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+ 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+ 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+ 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+ 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+ 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+ 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+ 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+ 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+ 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+ 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+ 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+ 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+ 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+ 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+ 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+ 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+ 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+ 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+ 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+ 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
};
-
- aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
- };
};
eim-cs1@f4000000 {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-evk";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-qsb";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+ 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
};
audmux@63fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
esdhc@50008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
uart3: serial@5000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-smd";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
uart2: serial@53fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
+ usb@53f80000 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@53f80200 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@53f80400 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@53f80600 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@53f9c000 { /* WDOG2 */
status = "disabled";
};
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+ 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+ 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+ 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
+ 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
+ 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+ 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+ 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+ 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+ 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+ 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+ 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+ 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+ 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
+ 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+
+ pinctrl_esdhc1_2: esdhc1grp-2 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+ 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+ 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+ 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+ 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+ 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+ 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+ 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+ 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+ >;
+ };
+ };
+
+ esdhc3 {
+ pinctrl_esdhc3_1: esdhc3grp-1 {
+ fsl,pins = <
+ 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+ 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+ 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+ 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+ 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+ 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+ 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+ 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+ 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+ 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+ 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
+ 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+ 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+ >;
+ };
+
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+ 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+ 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+ 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+ 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
+ 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
status = "disabled";
};
+ can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ status = "disabled";
+ };
+
+ can2: can@53fcc000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <83>;
+ status = "disabled";
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi@63fc0000 {
status = "disabled"; /* gpmi nand conflicts with SD */
};
+ aips-bus@02000000 { /* AIPS1 */
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+ >;
+ };
+ };
+ };
+ };
+
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
};
uart4: serial@021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
};
iomuxc@020e0000 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_hog>;
+ pinctrl-0 = <&pinctrl_hog>;
- gpios {
- pinctrl_gpio_hog: gpiohog {
+ hog {
+ pinctrl_hog: hoggrp {
fsl,pins = <
- 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
- 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
- 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
- >;
+ 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+ 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+ 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+ 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+ >;
};
};
};
aips-bus@02100000 { /* AIPS2 */
usb@02184000 { /* USB OTG */
vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
status = "okay";
};
};
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
vmmc-supply = <®_3p3v>;
};
usdhc@0219c000 { /* uSDHC4 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_2>;
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
vmmc-supply = <®_3p3v>;
uart2: serial@021e8000 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2_1>;
+ pinctrl-0 = <&pinctrl_uart2_1>;
};
i2c@021a0000 { /* I2C1 */
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ clocks = <&clks 169>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
};
soc {
-
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
uart1: serial@02020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
+
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+ 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+ >;
+ };
+ };
+ };
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02194000 { /* uSDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_1>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
+ clocks = <&clks 106>;
};
gpmi-nand@00112000 {
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
- fsl,gpmi-dma-channel = <0>;
- status = "disabled";
+ compatible = "fsl,imx6q-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <0 13 0x04>, <0 15 0x04>;
+ interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+ <&clks 150>, <&clks 149>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ fsl,gpmi-dma-channel = <0>;
+ status = "disabled";
};
timer@00a00600 {
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 0x04>;
+ clocks = <&clks 112>, <&clks 112>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 0x04>;
+ clocks = <&clks 113>, <&clks 113>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 0x04>;
+ clocks = <&clks 114>, <&clks 114>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 0x04>;
+ clocks = <&clks 115>, <&clks 115>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
+ clocks = <&clks 116>, <&clks 116>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
+ clocks = <&clks 178>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
+ clocks = <&clks 179>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
+ clocks = <&clks 180>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
- status = "disabled";
+ clocks = <&clks 0>;
};
wdog@020c0000 { /* WDOG2 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
+ clocks = <&clks 0>;
status = "disabled";
};
- ccm@020c4000 {
+ clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
};
anatop@020c8000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
+ clocks = <&clks 182>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
+ clocks = <&clks 183>;
};
snvs@020cc000 {
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
- fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
- 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
- 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
- 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ fsl,pins = <
+ 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+ 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+ 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+ 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+ 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+ 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
+ };
+
+ pinctrl_enet_2: enetgrp-2 {
+ fsl,pins = <
+ 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+ 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
};
};
gpmi-nand {
pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
- 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
- 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
- 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
- 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
- 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
- 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
- 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
- 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
- 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
- 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
- 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
- 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
- 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
- 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
- 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
- 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
- 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
- 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+ fsl,pins = <
+ 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+ 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+ 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+ 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+ 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+ 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+ 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+ 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+ 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+ 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+ 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+ 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+ 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+ 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+ 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+ 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+ 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+ 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+ 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+ >;
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
- 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ fsl,pins = <
+ 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+ 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+ 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+ >;
};
};
- serial2 {
- pinctrl_serial2_1: serial2grp-1 {
- fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
- 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
+ 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ >;
+ };
+ };
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */
+ 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+ >;
+ };
+ };
+
+ usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+ fsl,pins = <
+ 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+ 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+ 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+ 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+ 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+ 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+ 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+ 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+ 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+ 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+ >;
};
};
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
- 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
- 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
- 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
- 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
- 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
- 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
- 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
- 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
- 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+ 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ >;
+ };
+
+ pinctrl_usdhc3_2: usdhc3grp-2 {
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ >;
};
};
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
- fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
- 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
- 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
- 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
- 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
- 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
- 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
- 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
- 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
- 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ >;
};
- };
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
- 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
- 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ pinctrl_usdhc4_2: usdhc4grp-2 {
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ >;
};
};
};
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
+ clocks = <&clks 155>, <&clks 155>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
};
};
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
+ clocks = <&clks 162>;
fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
+ clocks = <&clks 162>;
fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks 162>;
+ };
+
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
+ clocks = <&clks 117>, <&clks 117>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
+ clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
+ clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
+ clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
+ clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
+ clocks = <&clks 125>;
status = "disabled";
};
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
+ clocks = <&clks 126>;
status = "disabled";
};
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
+ clocks = <&clks 127>;
status = "disabled";
};
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
};
interrupt-parent = <&intc>;
ranges;
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
+
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
compatible = "qcom,msm8660-surf", "qcom,msm8660";
interrupt-parent = <&intc>;
- intc: interrupt-controller@02080000 {
+ intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
< 0x02081000 0x1000 >;
};
+ timer@2000004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 1 0x301>;
+ reg = <0x02000004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ timer@2000024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 0 0x301>;
+ reg = <0x02000024 0x10>,
+ <0x02000034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x40000>;
+ };
+
serial@19c400000 {
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
--- /dev/null
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8960 CDP";
+ compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 2 0x301>;
+ reg = <0x0200a004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ timer@200a024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 1 0x301>;
+ reg = <0x0200a024 0x10>,
+ <0x0200a034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x80000>;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ };
+};
*/
/dts-v1/;
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
/ {
model = "TI OMAP2420 H4 board";
--- /dev/null
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2420", "ti,omap2";
+
+ ocp {
+ omap2420_pmx: pinmux@48000030 {
+ compatible = "ti,omap2420-padconf", "pinctrl-single";
+ reg = <0x48000030 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp2";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2";
+
+ ocp {
+ omap2430_pmx: pinmux@49002030 {
+ compatible = "ti,omap2430-padconf", "pinctrl-single";
+ reg = <0x49002030 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <64>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>, /* RX interrupt */
+ <61>; /* RX overflow interrupt */
+ interrupt-names = "common", "tx", "rx", "rx_overflow";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@4808c000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808c000 0xff>;
+ reg-names = "mpu";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@4808e000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808e000 0xff>;
+ reg-names = "mpu";
+ interrupts = <18>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <19>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap36xx.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard xM";
+ compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ };
+
+ heartbeat {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
+++ /dev/null
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
- model = "TI OMAP3 BeagleBoard";
- compatible = "ti,omap3-beagle", "ti,omap3";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- vsim: regulator@10 {
- compatible = "ti,twl4030-vsim";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-};
-
-/include/ "twl4030.dtsi"
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
};
&i2c1 {
reg = <0x5c>;
};
};
+
+&twl_gpio {
+ ti,use-leds;
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ overo {
+ label = "overo:blue:COM";
+ gpios = <&twl_gpio 19 0>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+ status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+ bus-width = <4>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+ model = "TI OMAP3 Gumstix Overo on Tobi";
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
- serial3 = &uart4;
};
cpus {
reg = <0x48200000 0x1000>;
};
+ omap3_pmx_core: pinmux@48002030 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002030 0x05cc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap3_pmx_wkup: pinmux@0x48002a58 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002a58 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
ti,hwmods = "gpio1";
clock-frequency = <48000000>;
};
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
-
i2c1: i2c@48070000 {
compatible = "ti,omap3-i2c";
#address-cells = <1>;
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@49022000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49022000 0xff>,
+ <0x49028000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>, /* RX interrupt */
+ <4>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <1280>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@49024000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49024000 0xff>,
+ <0x4902a000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <22>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>, /* RX interrupt */
+ <5>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@49026000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49026000 0xff>;
+ reg-names = "mpu";
+ interrupts = <23>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <27>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
};
};
--- /dev/null
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ ocp {
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+ };
+};
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
ti,non-removable;
bus-width = <4>;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- vdd_eth: fixedregulator@0 {
+ vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-boot-on;
};
- vbat: fixedregulator@2 {
+ vbat: fixedregulator-vbat {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
};
};
+&omap4_pmx_core {
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+ 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
+ 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+ 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+ 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+ 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+ 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
+ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ >;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
bus-width = <4>;
ti,non-removable;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00000012 /* KEY_E */
+ 0x00010013 /* KEY_R */
+ 0x00020014 /* KEY_T */
+ 0x00030066 /* KEY_HOME */
+ 0x0004003f /* KEY_F5 */
+ 0x000500f0 /* KEY_UNKNOWN */
+ 0x00060017 /* KEY_I */
+ 0x0007002a /* KEY_LEFTSHIFT */
+ 0x01000020 /* KEY_D*/
+ 0x01010021 /* KEY_F */
+ 0x01020022 /* KEY_G */
+ 0x010300e7 /* KEY_SEND */
+ 0x01040040 /* KEY_F6 */
+ 0x010500f0 /* KEY_UNKNOWN */
+ 0x01060025 /* KEY_K */
+ 0x0107001c /* KEY_ENTER */
+ 0x0200002d /* KEY_X */
+ 0x0201002e /* KEY_C */
+ 0x0202002f /* KEY_V */
+ 0x0203006b /* KEY_END */
+ 0x02040041 /* KEY_F7 */
+ 0x020500f0 /* KEY_UNKNOWN */
+ 0x02060034 /* KEY_DOT */
+ 0x0207003a /* KEY_CAPSLOCK */
+ 0x0300002c /* KEY_Z */
+ 0x0301004e /* KEY_KPLUS */
+ 0x03020030 /* KEY_B */
+ 0x0303003b /* KEY_F1 */
+ 0x03040042 /* KEY_F8 */
+ 0x030500f0 /* KEY_UNKNOWN */
+ 0x03060018 /* KEY_O */
+ 0x03070039 /* KEY_SPACE */
+ 0x04000011 /* KEY_W */
+ 0x04010015 /* KEY_Y */
+ 0x04020016 /* KEY_U */
+ 0x0403003c /* KEY_F2 */
+ 0x04040073 /* KEY_VOLUMEUP */
+ 0x040500f0 /* KEY_UNKNOWN */
+ 0x04060026 /* KEY_L */
+ 0x04070069 /* KEY_LEFT */
+ 0x0500001f /* KEY_S */
+ 0x05010023 /* KEY_H */
+ 0x05020024 /* KEY_J */
+ 0x0503003d /* KEY_F3 */
+ 0x05040043 /* KEY_F9 */
+ 0x05050072 /* KEY_VOLUMEDOWN */
+ 0x05060032 /* KEY_M */
+ 0x0507006a /* KEY_RIGHT */
+ 0x06000010 /* KEY_Q */
+ 0x0601001e /* KEY_A */
+ 0x06020031 /* KEY_N */
+ 0x0603009e /* KEY_BACK */
+ 0x0604000e /* KEY_BACKSPACE */
+ 0x060500f0 /* KEY_UNKNOWN */
+ 0x06060019 /* KEY_P */
+ 0x06070067 /* KEY_UP */
+ 0x07000094 /* KEY_PROG1 */
+ 0x07010095 /* KEY_PROG2 */
+ 0x070200ca /* KEY_PROG3 */
+ 0x070300cb /* KEY_PROG4 */
+ 0x0704003e /* KEY_F4 */
+ 0x070500f0 /* KEY_UNKNOWN */
+ 0x07060160 /* KEY_OK */
+ 0x0707006c>; /* KEY_DOWN */
+ linux,input-no-autorepeat;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
};
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+
+ L2: l2-cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@0x48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
- *
- * MPU -+-- MPU_PRIVATE - GIC, L2
- * |
- * +----------------+----------+
- * | | |
- * + +- EMIF - DDR |
- * | | |
- * | + +--------+
- * | | |
- * | +- L4_ABE - AESS, MCBSP, TIMERs...
- * | |
- * +- L3_MAIN --+- L4_CORE - IPs...
- * |
- * +- L4_PER - IPs...
- * |
- * +- L4_CFG -+- L4_WKUP - IPs...
- * | |
- * | +- IPs...
- * +- IPU ----+
- * | |
- * +- DSP ----+
- * | |
- * +- DSS ----+
- *
* Since that will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- gic: interrupt-controller@48241000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x48241000 0x1000>,
- <0x48240100 0x0100>;
+ omap4_pmx_core: pinmux@4a100040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ omap4_pmx_wkup: pinmux@4a31e040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a31e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4a310000 0x200>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48055000 0x200>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48057000 0x200>;
+ interrupts = <0 31 0x4>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48059000 0x200>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805b000 0x200>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805d000 0x200>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48070000 0x100>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48072000 0x100>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48060000 0x100>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48350000 0x100>;
+ interrupts = <0 62 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x48098000 0x200>;
+ interrupts = <0 65 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x4809a000 0x200>;
+ interrupts = <0 66 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480b8000 0x200>;
+ interrupts = <0 91 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ interrupts = <0 83 0x4>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480b4000 0x400>;
+ interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480ad000 0x400>;
+ interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d1000 0x400>;
+ interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d5000 0x400>;
+ interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x4a314000 0x80>;
+ interrupts = <0 80 0x4>;
ti,hwmods = "wd_timer2";
};
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@48096000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x48096000 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ interrupts = <0 16 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ keypad: keypad@4a31c000 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x4a31c000 0x80>;
+ interrupts = <0 120 0x4>;
+ reg-names = "mpu";
+ ti,hwmods = "kbd";
+ };
+
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4c000000 0x100>;
+ interrupts = <0 110 0x4>;
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@4d000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4d000000 0x100>;
+ interrupts = <0 111 0x4>;
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ /* Pressure Sensor */
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /* Temperature Sensor */
+ tmp102@48{
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ };
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x02020073 /* VOLUP */
+ 0x02030072 /* VOLDOWM */
+ 0x020400e7 /* SEND */
+ 0x02050066 /* HOME */
+ 0x0206006b /* END */
+ 0x020700d9>; /* SEARCH */
+ linux,input-no-autorepeat;
};
#interrupt-cells = <1>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@4807A000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
+
+ i2c5: i2c@4807C000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c5";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ };
+
+ mmc4: mmc@480d1000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc4";
+ ti,needs-special-reset;
+ };
+
+ mmc5: mmc@480d5000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc5";
+ ti,needs-special-reset;
+ };
+
+ keypad: keypad@4ae1c000 {
+ compatible = "ti,omap4-keypad";
+ ti,hwmods = "kbd";
+ };
+
+ mcpdm: mcpdm@40132000 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x40132000 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 112 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "mcpdm";
+ };
+
+ dmic: dmic@4012e000 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x4012e000 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 114 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "dmic";
+ };
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
};
};
ssp0: ssp@20084000 {
#address-cells = <1>;
#size-cells = <0>;
- pl022,num-chipselects = <1>;
+ num-cs = <1>;
cs-gpios = <&gpio 3 5 0>;
eeprom: at25@0 {
- pl022,hierarchy = <0>;
pl022,interface = <0>;
- pl022,slave-tx-disable = <0>;
pl022,com-mode = <0>;
pl022,rx-level-trig = <1>;
pl022,tx-level-trig = <1>;
+++ /dev/null
-/dts-v1/;
-/ {
- model = "SiRF Prima2 eVB";
- compatible = "sirf,prima2-cb", "sirf,prima2";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
- linux,stdout-path = &uart1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- /* from bootloader */
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- axi {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x40000000 0x40000000 0x80000000>;
-
- l2-cache-controller@80040000 {
- compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
- reg = <0x80040000 0x1000>;
- interrupts = <59>;
- arm,tag-latency = <1 1 1>;
- arm,data-latency = <1 1 1>;
- arm,filter-ranges = <0 0x40000000>;
- };
-
- intc: interrupt-controller@80020000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "sirf,prima2-intc";
- reg = <0x80020000 0x1000>;
- };
-
- sys-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x88000000 0x88000000 0x40000>;
-
- clock-controller@88000000 {
- compatible = "sirf,prima2-clkc";
- reg = <0x88000000 0x1000>;
- interrupts = <3>;
- };
-
- reset-controller@88010000 {
- compatible = "sirf,prima2-rstc";
- reg = <0x88010000 0x1000>;
- };
-
- rsc-controller@88020000 {
- compatible = "sirf,prima2-rsc";
- reg = <0x88020000 0x1000>;
- };
- };
-
- mem-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x90000000 0x90000000 0x10000>;
-
- memory-controller@90000000 {
- compatible = "sirf,prima2-memc";
- reg = <0x90000000 0x10000>;
- interrupts = <27>;
- };
- };
-
- disp-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x90010000 0x90010000 0x30000>;
-
- display@90010000 {
- compatible = "sirf,prima2-lcd";
- reg = <0x90010000 0x20000>;
- interrupts = <30>;
- };
-
- vpp@90020000 {
- compatible = "sirf,prima2-vpp";
- reg = <0x90020000 0x10000>;
- interrupts = <31>;
- };
- };
-
- graphics-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x98000000 0x98000000 0x8000000>;
-
- graphics@98000000 {
- compatible = "powervr,sgx531";
- reg = <0x98000000 0x8000000>;
- interrupts = <6>;
- };
- };
-
- multimedia-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xa0000000 0xa0000000 0x8000000>;
-
- multimedia@a0000000 {
- compatible = "sirf,prima2-video-codec";
- reg = <0xa0000000 0x8000000>;
- interrupts = <5>;
- };
- };
-
- dsp-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xa8000000 0xa8000000 0x2000000>;
-
- dspif@a8000000 {
- compatible = "sirf,prima2-dspif";
- reg = <0xa8000000 0x10000>;
- interrupts = <9>;
- };
-
- gps@a8010000 {
- compatible = "sirf,prima2-gps";
- reg = <0xa8010000 0x10000>;
- interrupts = <7>;
- };
-
- dsp@a9000000 {
- compatible = "sirf,prima2-dsp";
- reg = <0xa9000000 0x1000000>;
- interrupts = <8>;
- };
- };
-
- peri-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xb0000000 0xb0000000 0x180000>;
-
- timer@b0020000 {
- compatible = "sirf,prima2-tick";
- reg = <0xb0020000 0x1000>;
- interrupts = <0>;
- };
-
- nand@b0030000 {
- compatible = "sirf,prima2-nand";
- reg = <0xb0030000 0x10000>;
- interrupts = <41>;
- };
-
- audio@b0040000 {
- compatible = "sirf,prima2-audio";
- reg = <0xb0040000 0x10000>;
- interrupts = <35>;
- };
-
- uart0: uart@b0050000 {
- cell-index = <0>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0050000 0x10000>;
- interrupts = <17>;
- };
-
- uart1: uart@b0060000 {
- cell-index = <1>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0060000 0x10000>;
- interrupts = <18>;
- };
-
- uart2: uart@b0070000 {
- cell-index = <2>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0070000 0x10000>;
- interrupts = <19>;
- };
-
- usp0: usp@b0080000 {
- cell-index = <0>;
- compatible = "sirf,prima2-usp";
- reg = <0xb0080000 0x10000>;
- interrupts = <20>;
- };
-
- usp1: usp@b0090000 {
- cell-index = <1>;
- compatible = "sirf,prima2-usp";
- reg = <0xb0090000 0x10000>;
- interrupts = <21>;
- };
-
- usp2: usp@b00a0000 {
- cell-index = <2>;
- compatible = "sirf,prima2-usp";
- reg = <0xb00a0000 0x10000>;
- interrupts = <22>;
- };
-
- dmac0: dma-controller@b00b0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-dmac";
- reg = <0xb00b0000 0x10000>;
- interrupts = <12>;
- };
-
- dmac1: dma-controller@b0160000 {
- cell-index = <1>;
- compatible = "sirf,prima2-dmac";
- reg = <0xb0160000 0x10000>;
- interrupts = <13>;
- };
-
- vip@b00C0000 {
- compatible = "sirf,prima2-vip";
- reg = <0xb00C0000 0x10000>;
- };
-
- spi0: spi@b00d0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-spi";
- reg = <0xb00d0000 0x10000>;
- interrupts = <15>;
- };
-
- spi1: spi@b0170000 {
- cell-index = <1>;
- compatible = "sirf,prima2-spi";
- reg = <0xb0170000 0x10000>;
- interrupts = <16>;
- };
-
- i2c0: i2c@b00e0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-i2c";
- reg = <0xb00e0000 0x10000>;
- interrupts = <24>;
- };
-
- i2c1: i2c@b00f0000 {
- cell-index = <1>;
- compatible = "sirf,prima2-i2c";
- reg = <0xb00f0000 0x10000>;
- interrupts = <25>;
- };
-
- tsc@b0110000 {
- compatible = "sirf,prima2-tsc";
- reg = <0xb0110000 0x10000>;
- interrupts = <33>;
- };
-
- gpio: gpio-controller@b0120000 {
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- compatible = "sirf,prima2-gpio-pinmux";
- reg = <0xb0120000 0x10000>;
- gpio-controller;
- interrupt-controller;
- };
-
- pwm@b0130000 {
- compatible = "sirf,prima2-pwm";
- reg = <0xb0130000 0x10000>;
- };
-
- efusesys@b0140000 {
- compatible = "sirf,prima2-efuse";
- reg = <0xb0140000 0x10000>;
- };
-
- pulsec@b0150000 {
- compatible = "sirf,prima2-pulsec";
- reg = <0xb0150000 0x10000>;
- interrupts = <48>;
- };
-
- pci-iobg {
- compatible = "sirf,prima2-pciiobg", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x56000000 0x56000000 0x1b00000>;
-
- sd0: sdhci@56000000 {
- cell-index = <0>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56000000 0x100000>;
- interrupts = <38>;
- };
-
- sd1: sdhci@56100000 {
- cell-index = <1>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56100000 0x100000>;
- interrupts = <38>;
- };
-
- sd2: sdhci@56200000 {
- cell-index = <2>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56200000 0x100000>;
- interrupts = <23>;
- };
-
- sd3: sdhci@56300000 {
- cell-index = <3>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56300000 0x100000>;
- interrupts = <23>;
- };
-
- sd4: sdhci@56400000 {
- cell-index = <4>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56400000 0x100000>;
- interrupts = <39>;
- };
-
- sd5: sdhci@56500000 {
- cell-index = <5>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56500000 0x100000>;
- interrupts = <39>;
- };
-
- pci-copy@57900000 {
- compatible = "sirf,prima2-pcicp";
- reg = <0x57900000 0x100000>;
- interrupts = <40>;
- };
-
- rom-interface@57a00000 {
- compatible = "sirf,prima2-romif";
- reg = <0x57a00000 0x100000>;
- };
- };
- };
-
- rtc-iobg {
- compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x80030000 0x10000>;
-
- gpsrtc@1000 {
- compatible = "sirf,prima2-gpsrtc";
- reg = <0x1000 0x1000>;
- interrupts = <55 56 57>;
- };
-
- sysrtc@2000 {
- compatible = "sirf,prima2-sysrtc";
- reg = <0x2000 0x1000>;
- interrupts = <52 53 54>;
- };
-
- pwrc@3000 {
- compatible = "sirf,prima2-pwrc";
- reg = <0x3000 0x1000>;
- interrupts = <32>;
- };
- };
-
- uus-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xb8000000 0xb8000000 0x40000>;
-
- usb0: usb@b00e0000 {
- compatible = "chipidea,ci13611a-prima2";
- reg = <0xb8000000 0x10000>;
- interrupts = <10>;
- };
-
- usb1: usb@b00f0000 {
- compatible = "chipidea,ci13611a-prima2";
- reg = <0xb8010000 0x10000>;
- interrupts = <11>;
- };
-
- sata@b00f0000 {
- compatible = "synopsys,dwc-ahsata";
- reg = <0xb8020000 0x10000>;
- interrupts = <37>;
- };
-
- security@b00f0000 {
- compatible = "sirf,prima2-security";
- reg = <0xb8030000 0x10000>;
- interrupts = <42>;
- };
- };
- };
-};
--- /dev/null
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+ model = "CSR SiRFprimaII Evaluation Board";
+ compatible = "sirf,prima2", "sirf,prima2-cb";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ axi {
+ peri-iobg {
+ uart@b0060000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ };
+ spi@b00d0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ };
+ spi@b0170000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+ compatible = "sirf,prima2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ /* from bootloader */
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x40000000 0x40000000 0x80000000>;
+
+ l2-cache-controller@80040000 {
+ compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+ reg = <0x80040000 0x1000>;
+ interrupts = <59>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
+ arm,filter-ranges = <0 0x40000000>;
+ };
+
+ intc: interrupt-controller@80020000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "sirf,prima2-intc";
+ reg = <0x80020000 0x1000>;
+ };
+
+ sys-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x88000000 0x88000000 0x40000>;
+
+ clock-controller@88000000 {
+ compatible = "sirf,prima2-clkc";
+ reg = <0x88000000 0x1000>;
+ interrupts = <3>;
+ };
+
+ reset-controller@88010000 {
+ compatible = "sirf,prima2-rstc";
+ reg = <0x88010000 0x1000>;
+ };
+
+ rsc-controller@88020000 {
+ compatible = "sirf,prima2-rsc";
+ reg = <0x88020000 0x1000>;
+ };
+ };
+
+ mem-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90000000 0x90000000 0x10000>;
+
+ memory-controller@90000000 {
+ compatible = "sirf,prima2-memc";
+ reg = <0x90000000 0x10000>;
+ interrupts = <27>;
+ };
+ };
+
+ disp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90010000 0x90010000 0x30000>;
+
+ display@90010000 {
+ compatible = "sirf,prima2-lcd";
+ reg = <0x90010000 0x20000>;
+ interrupts = <30>;
+ };
+
+ vpp@90020000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x90020000 0x10000>;
+ interrupts = <31>;
+ };
+ };
+
+ graphics-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x98000000 0x98000000 0x8000000>;
+
+ graphics@98000000 {
+ compatible = "powervr,sgx531";
+ reg = <0x98000000 0x8000000>;
+ interrupts = <6>;
+ };
+ };
+
+ multimedia-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+ multimedia@a0000000 {
+ compatible = "sirf,prima2-video-codec";
+ reg = <0xa0000000 0x8000000>;
+ interrupts = <5>;
+ };
+ };
+
+ dsp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+ dspif@a8000000 {
+ compatible = "sirf,prima2-dspif";
+ reg = <0xa8000000 0x10000>;
+ interrupts = <9>;
+ };
+
+ gps@a8010000 {
+ compatible = "sirf,prima2-gps";
+ reg = <0xa8010000 0x10000>;
+ interrupts = <7>;
+ };
+
+ dsp@a9000000 {
+ compatible = "sirf,prima2-dsp";
+ reg = <0xa9000000 0x1000000>;
+ interrupts = <8>;
+ };
+ };
+
+ peri-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0xb0000000 0x180000>;
+
+ timer@b0020000 {
+ compatible = "sirf,prima2-tick";
+ reg = <0xb0020000 0x1000>;
+ interrupts = <0>;
+ };
+
+ nand@b0030000 {
+ compatible = "sirf,prima2-nand";
+ reg = <0xb0030000 0x10000>;
+ interrupts = <41>;
+ };
+
+ audio@b0040000 {
+ compatible = "sirf,prima2-audio";
+ reg = <0xb0040000 0x10000>;
+ interrupts = <35>;
+ };
+
+ uart0: uart@b0050000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0050000 0x10000>;
+ interrupts = <17>;
+ };
+
+ uart1: uart@b0060000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0060000 0x10000>;
+ interrupts = <18>;
+ };
+
+ uart2: uart@b0070000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0070000 0x10000>;
+ interrupts = <19>;
+ };
+
+ usp0: usp@b0080000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0080000 0x10000>;
+ interrupts = <20>;
+ };
+
+ usp1: usp@b0090000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0090000 0x10000>;
+ interrupts = <21>;
+ };
+
+ usp2: usp@b00a0000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb00a0000 0x10000>;
+ interrupts = <22>;
+ };
+
+ dmac0: dma-controller@b00b0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb00b0000 0x10000>;
+ interrupts = <12>;
+ };
+
+ dmac1: dma-controller@b0160000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb0160000 0x10000>;
+ interrupts = <13>;
+ };
+
+ vip@b00C0000 {
+ compatible = "sirf,prima2-vip";
+ reg = <0xb00C0000 0x10000>;
+ };
+
+ spi0: spi@b00d0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb00d0000 0x10000>;
+ interrupts = <15>;
+ };
+
+ spi1: spi@b0170000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb0170000 0x10000>;
+ interrupts = <16>;
+ };
+
+ i2c0: i2c@b00e0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+ };
+
+ i2c1: i2c@b00f0000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00f0000 0x10000>;
+ interrupts = <25>;
+ };
+
+ tsc@b0110000 {
+ compatible = "sirf,prima2-tsc";
+ reg = <0xb0110000 0x10000>;
+ interrupts = <33>;
+ };
+
+ gpio: pinctrl@b0120000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,prima2-pinctrl";
+ reg = <0xb0120000 0x10000>;
+ interrupts = <43 44 45 46 47>;
+ gpio-controller;
+ interrupt-controller;
+
+ lcd_16pins_a: lcd0@0 {
+ lcd {
+ sirf,pins = "lcd_16bitsgrp";
+ sirf,function = "lcd_16bits";
+ };
+ };
+ lcd_18pins_a: lcd0@1 {
+ lcd {
+ sirf,pins = "lcd_18bitsgrp";
+ sirf,function = "lcd_18bits";
+ };
+ };
+ lcd_24pins_a: lcd0@2 {
+ lcd {
+ sirf,pins = "lcd_24bitsgrp";
+ sirf,function = "lcd_24bits";
+ };
+ };
+ lcdrom_pins_a: lcdrom0@0 {
+ lcd {
+ sirf,pins = "lcdromgrp";
+ sirf,function = "lcdrom";
+ };
+ };
+ uart0_pins_a: uart0@0 {
+ uart {
+ sirf,pins = "uart0grp";
+ sirf,function = "uart0";
+ };
+ };
+ uart1_pins_a: uart1@0 {
+ uart {
+ sirf,pins = "uart1grp";
+ sirf,function = "uart1";
+ };
+ };
+ uart2_pins_a: uart2@0 {
+ uart {
+ sirf,pins = "uart2grp";
+ sirf,function = "uart2";
+ };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+ uart {
+ sirf,pins = "uart2_nostreamctrlgrp";
+ sirf,function = "uart2_nostreamctrl";
+ };
+ };
+ spi0_pins_a: spi0@0 {
+ spi {
+ sirf,pins = "spi0grp";
+ sirf,function = "spi0";
+ };
+ };
+ spi1_pins_a: spi1@0 {
+ spi {
+ sirf,pins = "spi1grp";
+ sirf,function = "spi1";
+ };
+ };
+ i2c0_pins_a: i2c0@0 {
+ i2c {
+ sirf,pins = "i2c0grp";
+ sirf,function = "i2c0";
+ };
+ };
+ i2c1_pins_a: i2c1@0 {
+ i2c {
+ sirf,pins = "i2c1grp";
+ sirf,function = "i2c1";
+ };
+ };
+ pwm0_pins_a: pwm0@0 {
+ pwm {
+ sirf,pins = "pwm0grp";
+ sirf,function = "pwm0";
+ };
+ };
+ pwm1_pins_a: pwm1@0 {
+ pwm {
+ sirf,pins = "pwm1grp";
+ sirf,function = "pwm1";
+ };
+ };
+ pwm2_pins_a: pwm2@0 {
+ pwm {
+ sirf,pins = "pwm2grp";
+ sirf,function = "pwm2";
+ };
+ };
+ pwm3_pins_a: pwm3@0 {
+ pwm {
+ sirf,pins = "pwm3grp";
+ sirf,function = "pwm3";
+ };
+ };
+ gps_pins_a: gps@0 {
+ gps {
+ sirf,pins = "gpsgrp";
+ sirf,function = "gps";
+ };
+ };
+ vip_pins_a: vip@0 {
+ vip {
+ sirf,pins = "vipgrp";
+ sirf,function = "vip";
+ };
+ };
+ sdmmc0_pins_a: sdmmc0@0 {
+ sdmmc0 {
+ sirf,pins = "sdmmc0grp";
+ sirf,function = "sdmmc0";
+ };
+ };
+ sdmmc1_pins_a: sdmmc1@0 {
+ sdmmc1 {
+ sirf,pins = "sdmmc1grp";
+ sirf,function = "sdmmc1";
+ };
+ };
+ sdmmc2_pins_a: sdmmc2@0 {
+ sdmmc2 {
+ sirf,pins = "sdmmc2grp";
+ sirf,function = "sdmmc2";
+ };
+ };
+ sdmmc3_pins_a: sdmmc3@0 {
+ sdmmc3 {
+ sirf,pins = "sdmmc3grp";
+ sirf,function = "sdmmc3";
+ };
+ };
+ sdmmc4_pins_a: sdmmc4@0 {
+ sdmmc4 {
+ sirf,pins = "sdmmc4grp";
+ sirf,function = "sdmmc4";
+ };
+ };
+ sdmmc5_pins_a: sdmmc5@0 {
+ sdmmc5 {
+ sirf,pins = "sdmmc5grp";
+ sirf,function = "sdmmc5";
+ };
+ };
+ i2s_pins_a: i2s@0 {
+ i2s {
+ sirf,pins = "i2sgrp";
+ sirf,function = "i2s";
+ };
+ };
+ ac97_pins_a: ac97@0 {
+ ac97 {
+ sirf,pins = "ac97grp";
+ sirf,function = "ac97";
+ };
+ };
+ nand_pins_a: nand@0 {
+ nand {
+ sirf,pins = "nandgrp";
+ sirf,function = "nand";
+ };
+ };
+ usp0_pins_a: usp0@0 {
+ usp0 {
+ sirf,pins = "usp0grp";
+ sirf,function = "usp0";
+ };
+ };
+ usp1_pins_a: usp1@0 {
+ usp1 {
+ sirf,pins = "usp1grp";
+ sirf,function = "usp1";
+ };
+ };
+ usp2_pins_a: usp2@0 {
+ usp2 {
+ sirf,pins = "usp2grp";
+ sirf,function = "usp2";
+ };
+ };
+ usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+ usb0_utmi_drvbus {
+ sirf,pins = "usb0_utmi_drvbusgrp";
+ sirf,function = "usb0_utmi_drvbus";
+ };
+ };
+ usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+ usb1_utmi_drvbus {
+ sirf,pins = "usb1_utmi_drvbusgrp";
+ sirf,function = "usb1_utmi_drvbus";
+ };
+ };
+ warm_rst_pins_a: warm_rst@0 {
+ warm_rst {
+ sirf,pins = "warm_rstgrp";
+ sirf,function = "warm_rst";
+ };
+ };
+ pulse_count_pins_a: pulse_count@0 {
+ pulse_count {
+ sirf,pins = "pulse_countgrp";
+ sirf,function = "pulse_count";
+ };
+ };
+ cko0_rst_pins_a: cko0_rst@0 {
+ cko0_rst {
+ sirf,pins = "cko0_rstgrp";
+ sirf,function = "cko0_rst";
+ };
+ };
+ cko1_rst_pins_a: cko1_rst@0 {
+ cko1_rst {
+ sirf,pins = "cko1_rstgrp";
+ sirf,function = "cko1_rst";
+ };
+ };
+ };
+
+ pwm@b0130000 {
+ compatible = "sirf,prima2-pwm";
+ reg = <0xb0130000 0x10000>;
+ };
+
+ efusesys@b0140000 {
+ compatible = "sirf,prima2-efuse";
+ reg = <0xb0140000 0x10000>;
+ };
+
+ pulsec@b0150000 {
+ compatible = "sirf,prima2-pulsec";
+ reg = <0xb0150000 0x10000>;
+ interrupts = <48>;
+ };
+
+ pci-iobg {
+ compatible = "sirf,prima2-pciiobg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x56000000 0x56000000 0x1b00000>;
+
+ sd0: sdhci@56000000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56000000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd1: sdhci@56100000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56100000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd2: sdhci@56200000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56200000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd3: sdhci@56300000 {
+ cell-index = <3>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56300000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd4: sdhci@56400000 {
+ cell-index = <4>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56400000 0x100000>;
+ interrupts = <39>;
+ };
+
+ sd5: sdhci@56500000 {
+ cell-index = <5>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56500000 0x100000>;
+ interrupts = <39>;
+ };
+
+ pci-copy@57900000 {
+ compatible = "sirf,prima2-pcicp";
+ reg = <0x57900000 0x100000>;
+ interrupts = <40>;
+ };
+
+ rom-interface@57a00000 {
+ compatible = "sirf,prima2-romif";
+ reg = <0x57a00000 0x100000>;
+ };
+ };
+ };
+
+ rtc-iobg {
+ compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80030000 0x10000>;
+
+ gpsrtc@1000 {
+ compatible = "sirf,prima2-gpsrtc";
+ reg = <0x1000 0x1000>;
+ interrupts = <55 56 57>;
+ };
+
+ sysrtc@2000 {
+ compatible = "sirf,prima2-sysrtc";
+ reg = <0x2000 0x1000>;
+ interrupts = <52 53 54>;
+ };
+
+ pwrc@3000 {
+ compatible = "sirf,prima2-pwrc";
+ reg = <0x3000 0x1000>;
+ interrupts = <32>;
+ };
+ };
+
+ uus-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb8000000 0xb8000000 0x40000>;
+
+ usb0: usb@b00e0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8000000 0x10000>;
+ interrupts = <10>;
+ };
+
+ usb1: usb@b00f0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8010000 0x10000>;
+ interrupts = <11>;
+ };
+
+ sata@b00f0000 {
+ compatible = "synopsys,dwc-ahsata";
+ reg = <0xb8020000 0x10000>;
+ interrupts = <37>;
+ };
+
+ security@b00f0000 {
+ compatible = "sirf,prima2-security";
+ reg = <0xb8030000 0x10000>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
--- /dev/null
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+ model = "Marvell PXA27x familiy SoC";
+ compatible = "marvell,pxa27x";
+
+ pxabus {
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <34>;
+ };
+ };
+};
--- /dev/null
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Marvell PXA2xx family SoC";
+ compatible = "marvell,pxa2xx";
+ interrupt-parent = <&pxairq>;
+
+ aliases {
+ serial0 = &ffuart;
+ serial1 = &btuart;
+ serial2 = &stuart;
+ serial3 = &hwuart;
+ i2c0 = &pwri2c;
+ i2c1 = &pxai2c1;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,xscale";
+ };
+ };
+
+ pxabus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pxairq: interrupt-controller@40d00000 {
+ #interrupt-cells = <1>;
+ compatible = "marvell,pxa-intc";
+ interrupt-controller;
+ interrupt-parent;
+ marvell,intc-nr-irqs = <32>;
+ reg = <0x40d00000 0xd0>;
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "mrvl,pxa-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x40e00000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupts = <10>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ ranges;
+
+ gcb0: gpio@40e00000 {
+ reg = <0x40e00000 0x4>;
+ };
+
+ gcb1: gpio@40e00004 {
+ reg = <0x40e00004 0x4>;
+ };
+
+ gcb2: gpio@40e00008 {
+ reg = <0x40e00008 0x4>;
+ };
+ gcb3: gpio@40e0000c {
+ reg = <0x40e0000c 0x4>;
+ };
+ };
+
+ ffuart: uart@40100000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40100000 0x30>;
+ interrupts = <22>;
+ status = "disabled";
+ };
+
+ btuart: uart@40200000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40200000 0x30>;
+ interrupts = <21>;
+ status = "disabled";
+ };
+
+ stuart: uart@40700000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40700000 0x30>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ hwuart: uart@41100000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x41100000 0x30>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ pxai2c1: i2c@40301680 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40301680 0x30>;
+ interrupts = <18>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usb0: ohci@4c000000 {
+ compatible = "mrvl,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@41100000 {
+ compatible = "mrvl,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ status = "disabled";
+ };
+
+ rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+ };
+ };
+};
--- /dev/null
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+ model = "Marvell PXA3xx familiy SoC";
+ compatible = "marvell,pxa3xx";
+
+ pxabus {
+ pwri2c: i2c@40f500c0 {
+ compatible = "mrvl,pwri2c";
+ reg = <0x40f500c0 0x30>;
+ interrupts = <6>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <56>;
+ };
+ };
+};
interrupt-parent = <&intc>;
ranges;
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
+
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo0";
+ regulator-name = "vdd_ldo0,vddio_pex_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
pmc {
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&pmic 2 0>;
+ enable-active-high;
+ /* Hack until board-harmony-pcie.c is removed */
+ status = "disabled";
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 22 0>; /* gpio PC6 */
+ enable-active-high;
+ };
+
+ regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-harmony",
"nvidia,tegra-audio-wm8903";
--- /dev/null
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Medcom-Wide board";
+ compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-wm8903-medcom-wide",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Medcom-Wide";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
status = "okay";
clock-frequency = <400000>;
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&p5valw_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "+1.2vs_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "+1.0vs_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "+3.7vs_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "+1.1vs_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "+1.2vs_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "+3.3vs_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "+2.85vs_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ /*
+ * Research indicates this should be
+ * 1.8v; other boards that use this
+ * rail for the same purpose need it
+ * set to 1.8v. The schematic signal
+ * name is incorrect; perhaps copied
+ * from an incorrect NVIDIA reference.
+ */
+ regulator-name = "+2.85vs_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "+3.3vs_rtc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
usb@c5000000 {
status = "okay";
};
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p5valw_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+5valw";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-alc5632-paz00",
"nvidia,tegra-audio-alc5632";
--- /dev/null
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Plutux board";
+ compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-plutux",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Plutux";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
status = "okay";
clock-frequency = <400000>;
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
temperature-sensor@4c {
compatible = "nct1008";
reg = <0x4c>;
};
};
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
memory-controller@0x7000f400 {
emc-table@190000 {
reg = <190000>;
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-seaboard",
"nvidia,tegra-audio-wm8903";
--- /dev/null
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten SOM";
+ compatible = "ad,tamonten", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+ "spia", "spib", "spic";
+ nvidia,function = "gmi";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ dta {
+ nvidia,pins = "dta", "dtd";
+ nvidia,function = "sdio2";
+ };
+ dtb {
+ nvidia,pins = "dtb", "dtc", "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv", "slxa", "slxk";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint", "pta";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uarta";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+ "ld3", "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11", "ld12",
+ "ld13", "ld14", "ld15", "ld16", "ld17",
+ "ldc", "ldi", "lhp0", "lhp1", "lhp2",
+ "lhs", "lm0", "lm1", "lpp", "lpw0",
+ "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+ "lsda", "lsdi", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd";
+ nvidia,function = "pwm";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ slxc {
+ nvidia,pins = "slxc", "slxd";
+ nvidia,function = "spdif";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+ "cdev1", "cdev2", "dap1", "dtb", "gma",
+ "gmb", "gmc", "gmd", "gme", "gpu7",
+ "gpv", "i2cp", "pta", "rm", "slxa",
+ "slxk", "spia", "spib", "uac";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_csus {
+ nvidia,pins = "csus", "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+ "dtc", "dte", "dtf", "gpu", "sdio1",
+ "slxc", "slxd", "spdi", "spdo", "spig",
+ "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_ddc {
+ nvidia,pins = "ddc", "dta", "dtd", "kbca",
+ "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+ "sdc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsc1", "lsck", "lsda", "lsdi",
+ "lvp0", "owc", "sdb";
+ nvidia,tristate = <1>;
+ };
+ conf_irrx {
+ nvidia,pins = "irrx", "irtx", "sdd", "spic",
+ "spie", "spih", "uaa", "uab", "uad",
+ "uca", "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <2>;
+ };
+ conf_ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+ "lvs", "pmc";
+ nvidia,tristate = <0>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sys_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sys_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sys_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo0";
+ regulator-name = "vdd_ldo0,vddio_pex_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000600 {
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten Evaluation Carrier";
+ compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-wm8903-tec",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design TEC";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
};
usb@c5000000 {
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 22 0>; /* gpio PC6 */
+ enable-active-high;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-ventana",
"nvidia,tegra-audio-wm8903";
gpio-controller;
#gpio-cells = <2>;
};
+
+ max8907@3c {
+ compatible = "maxim,max8907";
+ reg = <0x3c>;
+ interrupts = <0 86 0x4>;
+
+ maxim,system-power-controller;
+
+ mbatt-supply = <&usb0_vbus_reg>;
+ in-v1-supply = <&mbatt_reg>;
+ in-v2-supply = <&mbatt_reg>;
+ in-v3-supply = <&mbatt_reg>;
+ in1-supply = <&mbatt_reg>;
+ in2-supply = <&nvvdd_sv3_reg>;
+ in3-supply = <&mbatt_reg>;
+ in4-supply = <&mbatt_reg>;
+ in5-supply = <&mbatt_reg>;
+ in6-supply = <&mbatt_reg>;
+ in7-supply = <&mbatt_reg>;
+ in8-supply = <&mbatt_reg>;
+ in9-supply = <&mbatt_reg>;
+ in10-supply = <&mbatt_reg>;
+ in11-supply = <&mbatt_reg>;
+ in12-supply = <&mbatt_reg>;
+ in13-supply = <&mbatt_reg>;
+ in14-supply = <&mbatt_reg>;
+ in15-supply = <&mbatt_reg>;
+ in16-supply = <&mbatt_reg>;
+ in17-supply = <&nvvdd_sv3_reg>;
+ in18-supply = <&nvvdd_sv3_reg>;
+ in19-supply = <&mbatt_reg>;
+ in20-supply = <&mbatt_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mbatt_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "mbatt";
+ regulator-name = "vbat_pmu";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sd1";
+ regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sd2";
+ regulator-name = "nvvdd_sv2,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ nvvdd_sv3_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sd3";
+ regulator-name = "nvvdd_sv3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-name = "nvvdd_ldo2,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo3";
+ regulator-name = "nvvdd_ldo3,vcom_1v8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-name = "nvvdd_ldo4,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-name = "nvvdd_ldo7,avddio_audio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo9";
+ regulator-name = "nvvdd_ldo9,avdd_cam*";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo10";
+ regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo11";
+ regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@15 {
+ reg = <15>;
+ regulator-compatible = "ldo12";
+ regulator-name = "nvvdd_ldo12,vddio_sdio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@16 {
+ reg = <16>;
+ regulator-compatible = "ldo13";
+ regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@17 {
+ reg = <17>;
+ regulator-compatible = "ldo14";
+ regulator-name = "nvvdd_ldo14,avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@18 {
+ reg = <18>;
+ regulator-compatible = "ldo15";
+ regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@19 {
+ reg = <19>;
+ regulator-compatible = "ldo16";
+ regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ regulator@20 {
+ reg = <20>;
+ regulator-compatible = "ldo17";
+ regulator-name = "nvvdd_ldo17,vddio_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@21 {
+ reg = <21>;
+ regulator-compatible = "ldo18";
+ regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@22 {
+ reg = <22>;
+ regulator-compatible = "ldo19";
+ regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@23 {
+ reg = <23>;
+ regulator-compatible = "ldo20";
+ regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@24 {
+ reg = <24>;
+ regulator-compatible = "out5v";
+ regulator-name = "usb0_vbus_reg";
+ };
+
+ regulator@25 {
+ reg = <25>;
+ regulator-compatible = "out33v";
+ regulator-name = "pmu_out3v3";
+ };
+
+ regulator@26 {
+ reg = <26>;
+ regulator-compatible = "bbat";
+ regulator-name = "pmu_bbat";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2400000>;
+ regulator-always-on;
+ };
+
+ regulator@27 {
+ reg = <27>;
+ regulator-compatible = "sdby";
+ regulator-name = "vdd_aon";
+ regulator-always-on;
+ };
+
+ regulator@28 {
+ reg = <28>;
+ regulator-compatible = "vrtc";
+ regulator-name = "vrtc,pmu_vccadc";
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
};
usb@c5000000 {
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb0_vbus_reg: regulator {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
--- /dev/null
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+ compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 0>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 0>;
+ };
+
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ reg = <104>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 2 0>;
+ };
+
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ reg = <105>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 83 0>; /* GPIO PK3 */
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+ compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "ddr";
+ reg = <100>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 0>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 0>;
+ };
+
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 238 0>; /* GPIO PDD6 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 236 0>; /* GPIO PDD4 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ reg = <104>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 8 0>;
+ };
+
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ reg = <105>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 234 0>; /* GPIO PDD2 */
+ };
+
+ vdd_bl2_reg: regulator@106 {
+ compatible = "regulator-fixed";
+ reg = <106>;
+ regulator-name = "vdd_bl2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 232 0>; /* GPIO PDD0 */
+ };
+ };
+};
+++ /dev/null
-/dts-v1/;
-
-/include/ "tegra30.dtsi"
-
-/ {
- model = "NVIDIA Tegra30 Cardhu evaluation board";
- compatible = "nvidia,cardhu", "nvidia,tegra30";
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- sdmmc1_clk_pz0 {
- nvidia,pins = "sdmmc1_clk_pz0";
- nvidia,function = "sdmmc1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc1_cmd_pz1 {
- nvidia,pins = "sdmmc1_cmd_pz1",
- "sdmmc1_dat0_py7",
- "sdmmc1_dat1_py6",
- "sdmmc1_dat2_py5",
- "sdmmc1_dat3_py4";
- nvidia,function = "sdmmc1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- "sdmmc4_rst_n_pcc3";
- nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
- nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- dap2_fs_pa2 {
- nvidia,pins = "dap2_fs_pa2",
- "dap2_sclk_pa3",
- "dap2_din_pa4",
- "dap2_dout_pa5";
- nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- };
- };
-
- serial@70006000 {
- status = "okay";
- clock-frequency = <408000000>;
- };
-
- i2c@7000c000 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000c500 {
- status = "okay";
- clock-frequency = <100000>;
-
- /* ALS and Proximity sensor */
- isl29028@44 {
- compatible = "isil,isl29028";
- reg = <0x44>;
- interrupt-parent = <&gpio>;
- interrupts = <88 0x04>; /*gpio PL0 */
- };
- };
-
- i2c@7000c700 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <100000>;
-
- wm8903: wm8903@1a {
- compatible = "wlf,wm8903";
- reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <179 0x04>; /* gpio PW3 */
-
- gpio-controller;
- #gpio-cells = <2>;
-
- micdet-cfg = <0>;
- micdet-delay = <100>;
- gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
- };
-
- tps62361 {
- compatible = "ti,tps62361";
- reg = <0x60>;
-
- regulator-name = "tps62361-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- };
- };
-
- ahub {
- i2s@70080400 {
- status = "okay";
- };
- };
-
- sdhci@78000000 {
- status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
- bus-width = <4>;
- };
-
- sdhci@78000600 {
- status = "okay";
- bus-width = <8>;
- };
-
- sound {
- compatible = "nvidia,tegra-audio-wm8903-cardhu",
- "nvidia,tegra-audio-wm8903";
- nvidia,model = "NVIDIA Tegra Cardhu";
-
- nvidia,audio-routing =
- "Headphone Jack", "HPOUTR",
- "Headphone Jack", "HPOUTL",
- "Int Spk", "ROP",
- "Int Spk", "RON",
- "Int Spk", "LOP",
- "Int Spk", "LON",
- "Mic Jack", "MICBIAS",
- "IN1L", "Mic Jack";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&wm8903>;
-
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
- };
-};
--- /dev/null
+/include/ "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu evaluation board";
+ compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ dap2_fs_pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <408000000>;
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* ALS and Proximity sensor */
+ isl29028@44 {
+ compatible = "isil,isl29028";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <88 0x04>; /*gpio PL0 */
+ };
+ };
+
+ i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <179 0x04>; /* gpio PW3 */
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+ };
+
+ tps62361 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <0 86 0x4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_ac_bat_reg>;
+ vcc2-supply = <&vdd_ac_bat_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v0_reg>;
+ vcc5-supply = <&vdd_ac_bat_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_ac_bat_reg>;
+ vccio-supply = <&vdd_ac_bat_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vdd1";
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vdd2";
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vddctrl";
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vio";
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
+ pmc {
+ status = "okay";
+ nvidia,invert-interrupt;
+ };
+
+ sdhci@78000000 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ bus-width = <4>;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ cam_1v8_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "cam_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio 220 0>; /* gpio PBB4 */
+ vin-supply = <&vio_reg>;
+ };
+
+ cp_5v_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "cp_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+ };
+
+ emmc_3v3_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "emmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 25 0>; /* gpio PD1 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ modem_3v3_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "modem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 30 0>; /* gpio PD6 */
+ };
+
+ pex_hvdd_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "pex_hvdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 95 0>; /* gpio PL7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam1_ldo_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vdd_cam1_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio 142 0>; /* gpio PR6 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam2_ldo_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vdd_cam2_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio 143 0>; /* gpio PR7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam3_ldo_reg: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "vdd_cam3_ldo";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 144 0>; /* gpio PS0 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_com_reg: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "vdd_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 24 0>; /* gpio PD0 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_fuse_3v3_reg: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "vdd_fuse_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 94 0>; /* gpio PL6 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_pnl1_reg: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "vdd_pnl1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 92 0>; /* gpio PL4 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_vid_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "vddio_vid";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 152 0>; /* GPIO PT0 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-cardhu",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Cardhu";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65910";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vrtc_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vrtc";
+ };
+
+ vio_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vio";
+ };
+
+ vdd1_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vdd1";
+ };
+
+ vdd2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vdd2";
+ };
+
+ vdd3_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "vdd3";
+ };
+
+ vdig1_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "vdig1";
+ };
+
+ vdig2_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "vdig2";
+ };
+
+ vpll_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "vpll";
+ };
+
+ vdac_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "vdac";
+ };
+
+ vaux1_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "vaux1";
+ };
+
+ vaux2_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "vaux2";
+ };
+
+ vaux33_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "vaux33";
+ };
+
+ vmmc_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "vmmc";
+ };
+ };
+};
interrupts = <11>;
};
- vdac: regulator@0 {
+ vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vpll2: regulator@1 {
+ vpll2: regulator-vpll2 {
compatible = "ti,twl4030-vpll2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vmmc1: regulator@2 {
+ vmmc1: regulator-vmmc1 {
compatible = "ti,twl4030-vmmc1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
interrupts = <11>;
};
- vaux1: regulator@0 {
+ vaux1: regulator-vaux1 {
compatible = "ti,twl6030-vaux1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vaux2: regulator@1 {
+ vaux2: regulator-vaux2 {
compatible = "ti,twl6030-vaux2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
};
- vaux3: regulator@2 {
+ vaux3: regulator-vaux3 {
compatible = "ti,twl6030-vaux3";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vmmc: regulator@3 {
+ vmmc: regulator-vmmc {
compatible = "ti,twl6030-vmmc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
};
- vpp: regulator@4 {
+ vpp: regulator-vpp {
compatible = "ti,twl6030-vpp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
};
- vusim: regulator@5 {
+ vusim: regulator-vusim {
compatible = "ti,twl6030-vusim";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2900000>;
};
- vdac: regulator@6 {
+ vdac: regulator-vdac {
compatible = "ti,twl6030-vdac";
};
- vana: regulator@7 {
+ vana: regulator-vana {
compatible = "ti,twl6030-vana";
};
- vcxio: regulator@8 {
+ vcxio: regulator-vcxio {
compatible = "ti,twl6030-vcxio";
regulator-always-on;
};
- vusb: regulator@9 {
+ vusb: regulator-vusb {
compatible = "ti,twl6030-vusb";
};
- v1v8: regulator@10 {
+ v1v8: regulator-v1v8 {
compatible = "ti,twl6030-v1v8";
regulator-always-on;
};
- v2v1: regulator@11 {
+ v2v1: regulator-v2v1 {
compatible = "ti,twl6030-v2v1";
regulator-always-on;
};
- clk32kg: regulator@12 {
+ clk32kg: regulator-clk32kg {
compatible = "ti,twl6030-clk32kg";
};
};
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_CLEANCACHE=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_TEST_KSTRTOX=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_SMP=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_ARCH_PRIMA2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_SIRF=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_KEXEC=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
.size \name , . - \name
.endm
+ .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+ adds \tmp, \addr, #\size - 1
+ sbcccs \tmp, \tmp, \limit
+ bcs \bad
+#endif
+ .endm
+
#endif /* __ASM_ASSEMBLER_H__ */
#endif
/* not all ARM platforms necessarily support this API ... */
+#ifdef CONFIG_NEED_MACH_GPIO_H
#include <mach/gpio.h>
+#endif
#ifndef __ARM_GPIOLIB_COMPLEX
/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
* warranty of any kind, whether express or implied.
*/
-extern void __init tauros2_init(void);
+#define CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+#define CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+
+extern void __init tauros2_init(unsigned int features);
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
-#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA 0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\
- IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\
- IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
- IOP3XX_PCI_LOWER_IO_PA) +\
- IOP3XX_PCI_LOWER_IO_VA)
-
+#define IOP3XX_PCI_LOWER_IO_BA 0x00000000
#ifndef __ASSEMBLY__
#define __iowmb() do { } while (0)
#endif
+/* PCI fixed i/o mapping */
+#define PCI_IO_VIRT_BASE 0xfee00000
+
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+
/*
* Now, pick up the machine-defined IO definitions
*/
#ifdef CONFIG_NEED_MACH_IO_H
#include <mach/io.h>
+#elif defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT ((resource_size_t)0xfffff)
+#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
#else
#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT)
#endif
struct meminfo;
struct sys_timer;
struct pt_regs;
+struct smp_operations;
+#ifdef CONFIG_SMP
+#define smp_ops(ops) (&(ops))
+#else
+#define smp_ops(ops) (struct smp_operations *)NULL
+#endif
struct machine_desc {
unsigned int nr; /* architecture number */
unsigned char reserve_lp1 :1; /* never has lp1 */
unsigned char reserve_lp2 :1; /* never has lp2 */
char restart_mode; /* default restart mode */
+ struct smp_operations *smp; /* SMP operations */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */
*
* Page table mapping constructs and function prototypes
*/
+#ifndef __ASM_MACH_MAP_H
+#define __ASM_MACH_MAP_H
+
#include <asm/io.h>
struct map_desc {
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
+extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
+ void *caller);
struct mem_type;
extern const struct mem_type *get_mem_type(unsigned int type);
const struct mem_type *mtype);
#else
#define iotable_init(map,num) do { } while (0)
+#define vm_reserve_area_early(a,s,c) do { } while (0)
+#endif
+
#endif
#ifndef __ASM_MACH_PCI_H
#define __ASM_MACH_PCI_H
+#include <linux/ioport.h>
+
struct pci_sys_data;
struct pci_ops;
struct pci_bus;
unsigned long io_offset; /* bus->cpu IO mapping offset */
struct pci_bus *bus; /* PCI bus */
struct list_head resources; /* root bus resources (apertures) */
+ struct resource io_res;
+ char io_res_name[12];
/* Bridge swizzling */
u8 (*swizzle)(struct pci_dev *, u8 *);
/* IRQ mapping */
*/
void pci_common_init(struct hw_pci *);
+/*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
/*
* PCI controllers
*/
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
#endif
+#endif /* __ASSEMBLY__ */
#ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
#endif
#endif
+#ifndef __ASSEMBLY__
+
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
-/* Nothing to see here... */
+/*
+ * The ARMv7 CPU PMU supports up to 32 event counters.
+ */
+#define ARMPMU_MAX_HWEVENTS 32
+
+#define HW_OP_UNSUPPORTED 0xFFFF
+#define C(_x) PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED 0xFFFF
#endif /* __ARM_PERF_EVENT_H__ */
#include <linux/interrupt.h>
#include <linux/perf_event.h>
-/*
- * Types of PMUs that can be accessed directly and require mutual
- * exclusion between profiling tools.
- */
-enum arm_pmu_type {
- ARM_PMU_DEVICE_CPU = 0,
- ARM_NUM_PMU_DEVICES,
-};
-
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
- * @enable_irq: an optional handler which will be called after
- * request_irq and be used to handle some platform specific
- * irq enablement
- * @disable_irq: an optional handler which will be called before
- * free_irq and be used to handle some platform specific
- * irq disablement
+ * @runtime_resume: an optional handler which will be called by the
+ * runtime PM framework following a call to pm_runtime_get().
+ * Note that if pm_runtime_get() is called more than once in
+ * succession this handler will only be called once.
+ * @runtime_suspend: an optional handler which will be called by the
+ * runtime PM framework following a call to pm_runtime_put().
+ * Note that if pm_runtime_get() is called more than once in
+ * succession this handler will only be called following the
+ * final call to pm_runtime_put() that actually disables the
+ * hardware.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
- void (*enable_irq)(int irq);
- void (*disable_irq)(int irq);
+ int (*runtime_resume)(struct device *dev);
+ int (*runtime_suspend)(struct device *dev);
};
-#ifdef CONFIG_CPU_HAS_PMU
-
-/**
- * reserve_pmu() - reserve the hardware performance counters
- *
- * Reserve the hardware performance counters in the system for exclusive use.
- * Returns 0 on success or -EBUSY if the lock is already held.
- */
-extern int
-reserve_pmu(enum arm_pmu_type type);
-
-/**
- * release_pmu() - Relinquish control of the performance counters
- *
- * Release the performance counters and allow someone else to use them.
- */
-extern void
-release_pmu(enum arm_pmu_type type);
-
-#else /* CONFIG_CPU_HAS_PMU */
-
-#include <linux/err.h>
-
-static inline int
-reserve_pmu(enum arm_pmu_type type)
-{
- return -ENODEV;
-}
-
-static inline void
-release_pmu(enum arm_pmu_type type) { }
-
-#endif /* CONFIG_CPU_HAS_PMU */
-
#ifdef CONFIG_HW_PERF_EVENTS
/* The events for a given PMU register set. */
struct arm_pmu {
struct pmu pmu;
- enum arm_pmu_type type;
cpumask_t active_irqs;
char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*start)(void);
void (*stop)(void);
void (*reset)(void *);
+ int (*request_irq)(irq_handler_t handler);
+ void (*free_irq)(void);
int (*map_event)(struct perf_event *event);
int num_events;
atomic_t active_events;
#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+extern const struct dev_pm_ops armpmu_dev_pm_ops;
+
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type);
u64 armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
struct hw_perf_event *hwc,
int idx);
+int armpmu_map_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask);
+
#endif /* CONFIG_HW_PERF_EVENTS */
#endif /* __ARM_PMU_H__ */
*/
asmlinkage void secondary_start_kernel(void);
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
/*
* Initial data for bringing up a secondary CPU.
void *stack;
};
extern struct secondary_data secondary_data;
+extern volatile int pen_release;
extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void);
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+struct smp_operations {
+#ifdef CONFIG_SMP
+ /*
+ * Setup the set of possible CPUs (via set_cpu_possible)
+ */
+ void (*smp_init_cpus)(void);
+ /*
+ * Initialize cpu_possible map, and enable coherency
+ */
+ void (*smp_prepare_cpus)(unsigned int max_cpus);
+
+ /*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+ void (*smp_secondary_init)(unsigned int cpu);
+ /*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+ int (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
+#ifdef CONFIG_HOTPLUG_CPU
+ int (*cpu_kill)(unsigned int cpu);
+ void (*cpu_die)(unsigned int cpu);
+ int (*cpu_disable)(unsigned int cpu);
+#endif
+#endif
+};
+
+/*
+ * set platform specific SMP operations
+ */
+extern void smp_set_ops(struct smp_operations *);
+
#endif /* ifndef __ASM_ARM_SMP_H */
#define _ASMARM_TIMEX_H
#include <asm/arch_timer.h>
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+#define CLOCK_TICK_RATE 1000000
+#else
#include <mach/timex.h>
+#endif
typedef unsigned long cycles_t;
{
pgtable_page_dtor(pte);
+#ifdef CONFIG_ARM_LPAE
+ tlb_add_flush(tlb, addr);
+#else
/*
* With the classic ARM MMU, a pte page has two corresponding pmd
* entries, each covering 1MB.
addr &= PMD_MASK;
tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
tlb_add_flush(tlb, addr + SZ_1M);
+#endif
tlb_remove_page(tlb, pte);
}
extern int __get_user_2(void *);
extern int __get_user_4(void *);
-#define __get_user_x(__r2,__p,__e,__s,__i...) \
+#define __GUP_CLOBBER_1 "lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2 "ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4 "lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%1", "r2") \
+ __asmeq("%3", "r1") \
"bl __get_user_" #__s \
: "=&r" (__e), "=r" (__r2) \
- : "0" (__p) \
- : __i, "cc")
+ : "0" (__p), "r" (__l) \
+ : __GUP_CLOBBER_##__s)
-#define get_user(x,p) \
+#define __get_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
register unsigned long __r2 asm("r2"); \
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __get_user_x(__r2, __p, __e, 1, "lr"); \
- break; \
+ __get_user_x(__r2, __p, __e, __l, 1); \
+ break; \
case 2: \
- __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __get_user_x(__r2, __p, __e, 4, "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 4); \
break; \
default: __e = __get_user_bad(); break; \
} \
__e; \
})
+#define get_user(x,p) \
+ ({ \
+ might_fault(); \
+ __get_user_check(x,p); \
+ })
+
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
-#define __put_user_x(__r2,__p,__e,__s) \
+#define __put_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
+ __asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
+ : "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc")
-#define put_user(x,p) \
+#define __put_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __r2 asm("r2") = (x); \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __put_user_x(__r2, __p, __e, 1); \
+ __put_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
- __put_user_x(__r2, __p, __e, 2); \
+ __put_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __put_user_x(__r2, __p, __e, 4); \
+ __put_user_x(__r2, __p, __e, __l, 4); \
break; \
case 8: \
- __put_user_x(__r2, __p, __e, 8); \
+ __put_user_x(__r2, __p, __e, __l, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
+#define put_user(x,p) \
+ ({ \
+ might_fault(); \
+ __put_user_check(x,p); \
+ })
+
#else /* CONFIG_MMU */
/*
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
unsigned long __pu_addr = (unsigned long)(ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
--- /dev/null
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart,rp,rv,tmp
+ ldr \rv, =0xfee36000
+ ldr \rp, =0xfff36000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
--- /dev/null
+/*
+ * arch/arm/include/debug/icedcc.S
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ @@ debug using ARM EmbeddedICE DCC channel
+
+ .macro addruart, rp, rv, tmp
+ .endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ bne 1001b
+1002:
+ .endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
+#else
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c1, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ beq 1001b
+
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ bne 1001b
+1002:
+ .endm
+
+#endif /* CONFIG_CPU_V6 */
--- /dev/null
+/*
+ * Early serial output macro for Marvell SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
+ ldr \rv, =ARMADA_370_XP_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
--- /dev/null
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+
+#define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+ ldr \rp, =PICOXCELL_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
--- /dev/null
+/*
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rp, rv, tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rp, \rp, #0x00c00000
+ orr \rv, \rp, #0xfe000000 @ virtual base
+ orr \rp, \rp, #0xff000000 @ physical base
+ .endm
+
--- /dev/null
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG_LL_PHYS_BASE 0x10000000
+#define DEBUG_LL_UART_OFFSET 0x00009000
+
+#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
+#define DEBUG_LL_UART_OFFSET_RS1 0x00090000
+
+#define DEBUG_LL_VIRT_BASE 0xf8000000
+
+#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
+
+ .macro addruart,rp,rv,tmp
+
+ @ Make an educated guess regarding the memory map:
+ @ - the original A9 core tile, which has MPCore peripherals
+ @ located at 0x1e000000, should use UART at 0x10009000
+ @ - all other (RS1 complaint) tiles use UART mapped
+ @ at 0x1c090000
+ mrc p15, 4, \tmp, c15, c0, 0
+ cmp \tmp, #0x1e000000
+
+ @ Original memory map
+ moveq \rp, #DEBUG_LL_UART_OFFSET
+ orreq \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orreq \rp, \rp, #DEBUG_LL_PHYS_BASE
+
+ @ RS1 memory map
+ movne \rp, #DEBUG_LL_UART_OFFSET_RS1
+ orrne \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
+
+ .macro addruart,rp,rv,tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orr \rp, \rp, #DEBUG_LL_PHYS_BASE
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
+
+ .macro addruart,rp,rv,tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET_RS1
+ orr \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#else /* CONFIG_DEBUG_LL_UART_NONE */
+
+ .macro addruart, rp, rv, tmp
+ /* Safe dummy values */
+ mov \rp, #0
+ mov \rv, #DEBUG_LL_VIRT_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
+
+#endif
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
-obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
#include <linux/io.h>
#include <asm/mach-types.h>
+#include <asm/mach/map.h>
#include <asm/mach/pci.h>
static int debug_pci;
return irq;
}
+static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+{
+ int ret;
+ struct pci_host_bridge_window *window;
+
+ if (list_empty(&sys->resources)) {
+ pci_add_resource_offset(&sys->resources,
+ &iomem_resource, sys->mem_offset);
+ }
+
+ list_for_each_entry(window, &sys->resources, list) {
+ if (resource_type(window->res) == IORESOURCE_IO)
+ return 0;
+ }
+
+ sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io;
+ sys->io_res.end = (busnr + 1) * SZ_64K - 1;
+ sys->io_res.flags = IORESOURCE_IO;
+ sys->io_res.name = sys->io_res_name;
+ sprintf(sys->io_res_name, "PCI%d I/O", busnr);
+
+ ret = request_resource(&ioport_resource, &sys->io_res);
+ if (ret) {
+ pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
+ return ret;
+ }
+ pci_add_resource_offset(&sys->resources, &sys->io_res,
+ sys->io_offset);
+
+ return 0;
+}
+
static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
{
struct pci_sys_data *sys = NULL;
ret = hw->setup(nr, sys);
if (ret > 0) {
- if (list_empty(&sys->resources)) {
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
- pci_add_resource_offset(&sys->resources,
- &iomem_resource, sys->mem_offset);
+ ret = pcibios_init_resources(nr, sys);
+ if (ret) {
+ kfree(sys);
+ break;
}
if (hw->scan)
return 0;
}
+
+void __init pci_map_io_early(unsigned long pfn)
+{
+ struct map_desc pci_io_desc = {
+ .virtual = PCI_IO_VIRT_BASE,
+ .type = MT_DEVICE,
+ .length = SZ_64K,
+ };
+
+ pci_io_desc.pfn = pfn;
+ iotable_init(&pci_io_desc, 1);
+}
* references to these in a production kernel!
*/
-#if defined(CONFIG_DEBUG_ICEDCC)
- @@ debug using ARM EmbeddedICE DCC channel
-
- .macro addruart, rp, rv, tmp
- .endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c0, c5, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- bne 1001b
-1002:
- .endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c8, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x10000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- bne 1001b
-1002:
- .endm
-
-#else
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c1, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- beq 1001b
-
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- bne 1001b
-1002:
- .endm
-
-#endif /* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif /* CONFIG_DEBUG_ICEDCC */
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
#include <asm/thread_info.h>
#include <asm/pgtable.h>
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
#endif
/*
arch >= ARM_DEBUG_ARCH_V7_1;
}
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+ return 0;
+}
+
/* Determine number of WRP registers available. */
static int get_num_wrp_resources(void)
{
/* Aligned */
break;
case 1:
- /* Allow single byte watchpoint. */
- if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
- break;
case 2:
/* Allow halfword watchpoints and breakpoints. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
+ case 3:
+ /* Allow single byte watchpoint. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
default:
ret = -EINVAL;
goto out;
info->address &= ~alignment_mask;
info->ctrl.len <<= offset;
- /*
- * Currently we rely on an overflow handler to take
- * care of single-stepping the breakpoint when it fires.
- * In the case of userspace breakpoints on a core with V7 debug,
- * we can use the mismatch feature as a poor-man's hardware
- * single-step, but this only works for per-task breakpoints.
- */
- if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
- !core_has_mismatch_brps() || !bp->hw.bp_target)) {
- pr_warning("overflow handler required but none found\n");
- ret = -EINVAL;
+ if (!bp->overflow_handler) {
+ /*
+ * Mismatch breakpoints are required for single-stepping
+ * breakpoints.
+ */
+ if (!core_has_mismatch_brps())
+ return -EINVAL;
+
+ /* We don't allow mismatch breakpoints in kernel space. */
+ if (arch_check_bp_in_kernelspace(bp))
+ return -EPERM;
+
+ /*
+ * Per-cpu breakpoints are not supported by our stepping
+ * mechanism.
+ */
+ if (!bp->hw.bp_target)
+ return -EINVAL;
+
+ /*
+ * We only support specific access types if the fsr
+ * reports them.
+ */
+ if (!debug_exception_updates_fsr() &&
+ (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+ info->ctrl.type == ARM_BREAKPOINT_STORE))
+ return -EINVAL;
}
+
out:
return ret;
}
goto unlock;
/* Check that the access type matches. */
- access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
- HW_BREAKPOINT_R;
- if (!(access & hw_breakpoint_type(wp)))
- goto unlock;
+ if (debug_exception_updates_fsr()) {
+ access = (fsr & ARM_FSR_ACCESS_MASK) ?
+ HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+ }
/* We have a winner. */
info->trigger = addr;
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
-#include <linux/bitmap.h>
-#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/perf_event.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
#include <linux/uaccess.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <asm/stacktrace.h>
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
- * another platform that supports more, we need to increase this to be the
- * largest of all platforms.
- *
- * ARMv7 supports up to 32 events:
- * cycle counter CCNT + 31 events counters CNT0..30.
- * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
- */
-#define ARMPMU_MAX_HWEVENTS 32
-
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *cpu_pmu;
-
-const char *perf_pmu_name(void)
-{
- if (!cpu_pmu)
- return NULL;
-
- return cpu_pmu->pmu.name;
-}
-EXPORT_SYMBOL_GPL(perf_pmu_name);
-
-int perf_num_counters(void)
-{
- int max_events = 0;
-
- if (cpu_pmu != NULL)
- max_events = cpu_pmu->num_events;
-
- return max_events;
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-#define HW_OP_UNSUPPORTED 0xFFFF
-
-#define C(_x) \
- PERF_COUNT_HW_CACHE_##_x
-
-#define CACHE_OP_UNSUPPORTED 0xFFFF
-
static int
armpmu_map_cache_event(const unsigned (*cache_map)
[PERF_COUNT_HW_CACHE_MAX]
}
static int
-armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
+armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
int mapping = (*event_map)[config];
return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
return (int)(config & raw_event_mask);
}
-static int map_cpu_event(struct perf_event *event,
- const unsigned (*event_map)[PERF_COUNT_HW_MAX],
- const unsigned (*cache_map)
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX],
- u32 raw_event_mask)
+int
+armpmu_map_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask)
{
u64 config = event->attr.config;
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
- return armpmu_map_event(event_map, config);
+ return armpmu_map_hw_event(event_map, config);
case PERF_TYPE_HW_CACHE:
return armpmu_map_cache_event(cache_map, config);
case PERF_TYPE_RAW:
*/
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
- barrier(); /* why? */
armpmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
return 0;
}
-static irqreturn_t armpmu_platform_irq(int irq, void *dev)
+static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
{
struct arm_pmu *armpmu = (struct arm_pmu *) dev;
struct platform_device *plat_device = armpmu->plat_device;
struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
- return plat->handle_irq(irq, dev, armpmu->handle_irq);
+ if (plat && plat->handle_irq)
+ return plat->handle_irq(irq, dev, armpmu->handle_irq);
+ else
+ return armpmu->handle_irq(irq, dev);
}
static void
armpmu_release_hardware(struct arm_pmu *armpmu)
{
- int i, irq, irqs;
- struct platform_device *pmu_device = armpmu->plat_device;
- struct arm_pmu_platdata *plat =
- dev_get_platdata(&pmu_device->dev);
-
- irqs = min(pmu_device->num_resources, num_possible_cpus());
-
- for (i = 0; i < irqs; ++i) {
- if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
- continue;
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0) {
- if (plat && plat->disable_irq)
- plat->disable_irq(irq);
- free_irq(irq, armpmu);
- }
- }
-
- release_pmu(armpmu->type);
+ armpmu->free_irq();
+ pm_runtime_put_sync(&armpmu->plat_device->dev);
}
static int
armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
- struct arm_pmu_platdata *plat;
- irq_handler_t handle_irq;
- int i, err, irq, irqs;
+ int err;
struct platform_device *pmu_device = armpmu->plat_device;
if (!pmu_device)
return -ENODEV;
- err = reserve_pmu(armpmu->type);
+ pm_runtime_get_sync(&pmu_device->dev);
+ err = armpmu->request_irq(armpmu_dispatch_irq);
if (err) {
- pr_warning("unable to reserve pmu\n");
+ armpmu_release_hardware(armpmu);
return err;
}
- plat = dev_get_platdata(&pmu_device->dev);
- if (plat && plat->handle_irq)
- handle_irq = armpmu_platform_irq;
- else
- handle_irq = armpmu->handle_irq;
-
- irqs = min(pmu_device->num_resources, num_possible_cpus());
- if (irqs < 1) {
- pr_err("no irqs for PMUs defined\n");
- return -ENODEV;
- }
-
- for (i = 0; i < irqs; ++i) {
- err = 0;
- irq = platform_get_irq(pmu_device, i);
- if (irq < 0)
- continue;
-
- /*
- * If we have a single PMU interrupt that we can't shift,
- * assume that we're running on a uniprocessor machine and
- * continue. Otherwise, continue without this interrupt.
- */
- if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, i);
- continue;
- }
-
- err = request_irq(irq, handle_irq,
- IRQF_DISABLED | IRQF_NOBALANCING,
- "arm-pmu", armpmu);
- if (err) {
- pr_err("unable to request IRQ%d for ARM PMU counters\n",
- irq);
- armpmu_release_hardware(armpmu);
- return err;
- } else if (plat && plat->enable_irq)
- plat->enable_irq(irq);
-
- cpumask_set_cpu(i, &armpmu->active_irqs);
- }
-
return 0;
}
armpmu->stop();
}
+#ifdef CONFIG_PM_RUNTIME
+static int armpmu_runtime_resume(struct device *dev)
+{
+ struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+ if (plat && plat->runtime_resume)
+ return plat->runtime_resume(dev);
+
+ return 0;
+}
+
+static int armpmu_runtime_suspend(struct device *dev)
+{
+ struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+ if (plat && plat->runtime_suspend)
+ return plat->runtime_suspend(dev);
+
+ return 0;
+}
+#endif
+
+const struct dev_pm_ops armpmu_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL)
+};
+
static void __init armpmu_init(struct arm_pmu *armpmu)
{
atomic_set(&armpmu->active_events, 0);
};
}
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type)
{
armpmu_init(armpmu);
+ pr_info("enabled with %s PMU driver, %d counters available\n",
+ armpmu->name, armpmu->num_events);
return perf_pmu_register(&armpmu->pmu, name, type);
}
-/* Include the PMU-specific implementations. */
-#include "perf_event_xscale.c"
-#include "perf_event_v6.c"
-#include "perf_event_v7.c"
-
-/*
- * Ensure the PMU has sane values out of reset.
- * This requires SMP to be available, so exists as a separate initcall.
- */
-static int __init
-cpu_pmu_reset(void)
-{
- if (cpu_pmu && cpu_pmu->reset)
- return on_each_cpu(cpu_pmu->reset, NULL, 1);
- return 0;
-}
-arch_initcall(cpu_pmu_reset);
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static struct of_device_id armpmu_of_device_ids[] = {
- {.compatible = "arm,cortex-a9-pmu"},
- {.compatible = "arm,cortex-a8-pmu"},
- {.compatible = "arm,arm1136-pmu"},
- {.compatible = "arm,arm1176-pmu"},
- {},
-};
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
- {.name = "arm-pmu"},
- {},
-};
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
- if (!cpu_pmu)
- return -ENODEV;
-
- cpu_pmu->plat_device = pdev;
- return 0;
-}
-
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
- .id_table = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
- return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-static struct pmu_hw_events *armpmu_get_cpu_events(void)
-{
- return &__get_cpu_var(cpu_hw_events);
-}
-
-static void __init cpu_pmu_init(struct arm_pmu *armpmu)
-{
- int cpu;
- for_each_possible_cpu(cpu) {
- struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
- events->events = per_cpu(hw_events, cpu);
- events->used_mask = per_cpu(used_mask, cpu);
- raw_spin_lock_init(&events->pmu_lock);
- }
- armpmu->get_hw_events = armpmu_get_cpu_events;
- armpmu->type = ARM_PMU_DEVICE_CPU;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
- unsigned long action, void *hcpu)
-{
- if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
- return NOTIFY_DONE;
-
- if (cpu_pmu && cpu_pmu->reset)
- cpu_pmu->reset(NULL);
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
- .notifier_call = pmu_cpu_notify,
-};
-
-/*
- * CPU PMU identification and registration.
- */
-static int __init
-init_hw_perf_events(void)
-{
- unsigned long cpuid = read_cpuid_id();
- unsigned long implementor = (cpuid & 0xFF000000) >> 24;
- unsigned long part_number = (cpuid & 0xFFF0);
-
- /* ARM Ltd CPUs. */
- if (0x41 == implementor) {
- switch (part_number) {
- case 0xB360: /* ARM1136 */
- case 0xB560: /* ARM1156 */
- case 0xB760: /* ARM1176 */
- cpu_pmu = armv6pmu_init();
- break;
- case 0xB020: /* ARM11mpcore */
- cpu_pmu = armv6mpcore_pmu_init();
- break;
- case 0xC080: /* Cortex-A8 */
- cpu_pmu = armv7_a8_pmu_init();
- break;
- case 0xC090: /* Cortex-A9 */
- cpu_pmu = armv7_a9_pmu_init();
- break;
- case 0xC050: /* Cortex-A5 */
- cpu_pmu = armv7_a5_pmu_init();
- break;
- case 0xC0F0: /* Cortex-A15 */
- cpu_pmu = armv7_a15_pmu_init();
- break;
- case 0xC070: /* Cortex-A7 */
- cpu_pmu = armv7_a7_pmu_init();
- break;
- }
- /* Intel CPUs [xscale]. */
- } else if (0x69 == implementor) {
- part_number = (cpuid >> 13) & 0x7;
- switch (part_number) {
- case 1:
- cpu_pmu = xscale1pmu_init();
- break;
- case 2:
- cpu_pmu = xscale2pmu_init();
- break;
- }
- }
-
- if (cpu_pmu) {
- pr_info("enabled with %s PMU driver, %d counters available\n",
- cpu_pmu->name, cpu_pmu->num_events);
- cpu_pmu_init(cpu_pmu);
- register_cpu_notifier(&pmu_cpu_notifier);
- armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
- } else {
- pr_info("no hardware support available\n");
- }
-
- return 0;
-}
-early_initcall(init_hw_perf_events);
-
/*
* Callchain handling code.
*/
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+#define pr_fmt(fmt) "CPU PMU: " fmt
+
+#include <linux/bitmap.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <asm/cputype.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+
+/* Set at runtime when we know what CPU type we are. */
+static struct arm_pmu *cpu_pmu;
+
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
+
+/*
+ * Despite the names, these two functions are CPU-specific and are used
+ * by the OProfile/perf code.
+ */
+const char *perf_pmu_name(void)
+{
+ if (!cpu_pmu)
+ return NULL;
+
+ return cpu_pmu->pmu.name;
+}
+EXPORT_SYMBOL_GPL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+ int max_events = 0;
+
+ if (cpu_pmu != NULL)
+ max_events = cpu_pmu->num_events;
+
+ return max_events;
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
+
+static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
+{
+ return &__get_cpu_var(cpu_hw_events);
+}
+
+static void cpu_pmu_free_irq(void)
+{
+ int i, irq, irqs;
+ struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+ for (i = 0; i < irqs; ++i) {
+ if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
+ continue;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq >= 0)
+ free_irq(irq, cpu_pmu);
+ }
+}
+
+static int cpu_pmu_request_irq(irq_handler_t handler)
+{
+ int i, err, irq, irqs;
+ struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+ if (!pmu_device)
+ return -ENODEV;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+ if (irqs < 1) {
+ pr_err("no irqs for PMUs defined\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < irqs; ++i) {
+ err = 0;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq < 0)
+ continue;
+
+ /*
+ * If we have a single PMU interrupt that we can't shift,
+ * assume that we're running on a uniprocessor machine and
+ * continue. Otherwise, continue without this interrupt.
+ */
+ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, i);
+ continue;
+ }
+
+ err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu",
+ cpu_pmu);
+ if (err) {
+ pr_err("unable to request IRQ%d for ARM PMU counters\n",
+ irq);
+ return err;
+ }
+
+ cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+ }
+
+ return 0;
+}
+
+static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+{
+ int cpu;
+ for_each_possible_cpu(cpu) {
+ struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+ events->events = per_cpu(hw_events, cpu);
+ events->used_mask = per_cpu(used_mask, cpu);
+ raw_spin_lock_init(&events->pmu_lock);
+ }
+
+ cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events;
+ cpu_pmu->request_irq = cpu_pmu_request_irq;
+ cpu_pmu->free_irq = cpu_pmu_free_irq;
+
+ /* Ensure the PMU has sane values out of reset. */
+ if (cpu_pmu && cpu_pmu->reset)
+ on_each_cpu(cpu_pmu->reset, NULL, 1);
+}
+
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
+ unsigned long action, void *hcpu)
+{
+ if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+ return NOTIFY_DONE;
+
+ if (cpu_pmu && cpu_pmu->reset)
+ cpu_pmu->reset(NULL);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+ .notifier_call = cpu_pmu_notify,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+ {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init},
+ {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init},
+ {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init},
+ {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init},
+ {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init},
+ {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init},
+ {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init},
+ {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init},
+ {},
+};
+
+static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+ {.name = "arm-pmu"},
+ {},
+};
+
+/*
+ * CPU PMU identification and probing.
+ */
+static struct arm_pmu *__devinit probe_current_pmu(void)
+{
+ struct arm_pmu *pmu = NULL;
+ int cpu = get_cpu();
+ unsigned long cpuid = read_cpuid_id();
+ unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+ unsigned long part_number = (cpuid & 0xFFF0);
+
+ pr_info("probing PMU on CPU %d\n", cpu);
+
+ /* ARM Ltd CPUs. */
+ if (0x41 == implementor) {
+ switch (part_number) {
+ case 0xB360: /* ARM1136 */
+ case 0xB560: /* ARM1156 */
+ case 0xB760: /* ARM1176 */
+ pmu = armv6pmu_init();
+ break;
+ case 0xB020: /* ARM11mpcore */
+ pmu = armv6mpcore_pmu_init();
+ break;
+ case 0xC080: /* Cortex-A8 */
+ pmu = armv7_a8_pmu_init();
+ break;
+ case 0xC090: /* Cortex-A9 */
+ pmu = armv7_a9_pmu_init();
+ break;
+ case 0xC050: /* Cortex-A5 */
+ pmu = armv7_a5_pmu_init();
+ break;
+ case 0xC0F0: /* Cortex-A15 */
+ pmu = armv7_a15_pmu_init();
+ break;
+ case 0xC070: /* Cortex-A7 */
+ pmu = armv7_a7_pmu_init();
+ break;
+ }
+ /* Intel CPUs [xscale]. */
+ } else if (0x69 == implementor) {
+ part_number = (cpuid >> 13) & 0x7;
+ switch (part_number) {
+ case 1:
+ pmu = xscale1pmu_init();
+ break;
+ case 2:
+ pmu = xscale2pmu_init();
+ break;
+ }
+ }
+
+ put_cpu();
+ return pmu;
+}
+
+static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id;
+ struct arm_pmu *(*init_fn)(void);
+ struct device_node *node = pdev->dev.of_node;
+
+ if (cpu_pmu) {
+ pr_info("attempt to register multiple PMU devices!");
+ return -ENOSPC;
+ }
+
+ if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) {
+ init_fn = of_id->data;
+ cpu_pmu = init_fn();
+ } else {
+ cpu_pmu = probe_current_pmu();
+ }
+
+ if (!cpu_pmu)
+ return -ENODEV;
+
+ cpu_pmu->plat_device = pdev;
+ cpu_pmu_init(cpu_pmu);
+ register_cpu_notifier(&cpu_pmu_hotplug_notifier);
+ armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
+
+ return 0;
+}
+
+static struct platform_driver cpu_pmu_driver = {
+ .driver = {
+ .name = "arm-pmu",
+ .pm = &armpmu_dev_pm_ops,
+ .of_match_table = cpu_pmu_of_device_ids,
+ },
+ .probe = cpu_pmu_device_probe,
+ .id_table = cpu_pmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+ return platform_driver_register(&cpu_pmu_driver);
+}
+device_initcall(register_pmu_driver);
static int armv6_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv6_perf_map,
+ return armpmu_map_event(event, &armv6_perf_map,
&armv6_perf_cache_map, 0xFF);
}
.max_period = (1LLU << 32) - 1,
};
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
{
return &armv6pmu;
}
static int armv6mpcore_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv6mpcore_perf_map,
+ return armpmu_map_event(event, &armv6mpcore_perf_map,
&armv6mpcore_perf_cache_map, 0xFF);
}
.max_period = (1LLU << 32) - 1,
};
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
{
return NULL;
}
static int armv7_a8_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv7_a8_perf_map,
+ return armpmu_map_event(event, &armv7_a8_perf_map,
&armv7_a8_perf_cache_map, 0xFF);
}
static int armv7_a9_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv7_a9_perf_map,
+ return armpmu_map_event(event, &armv7_a9_perf_map,
&armv7_a9_perf_cache_map, 0xFF);
}
static int armv7_a5_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv7_a5_perf_map,
+ return armpmu_map_event(event, &armv7_a5_perf_map,
&armv7_a5_perf_cache_map, 0xFF);
}
static int armv7_a15_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv7_a15_perf_map,
+ return armpmu_map_event(event, &armv7_a15_perf_map,
&armv7_a15_perf_cache_map, 0xFF);
}
static int armv7_a7_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &armv7_a7_perf_map,
+ return armpmu_map_event(event, &armv7_a7_perf_map,
&armv7_a7_perf_cache_map, 0xFF);
}
.max_period = (1LLU << 32) - 1,
};
-static u32 __init armv7_read_num_pmnc_events(void)
+static u32 __devinit armv7_read_num_pmnc_events(void)
{
u32 nb_cnt;
return nb_cnt + 1;
}
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
{
armv7pmu.name = "ARMv7 Cortex-A8";
armv7pmu.map_event = armv7_a8_map_event;
return &armv7pmu;
}
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
{
armv7pmu.name = "ARMv7 Cortex-A9";
armv7pmu.map_event = armv7_a9_map_event;
return &armv7pmu;
}
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
{
armv7pmu.name = "ARMv7 Cortex-A5";
armv7pmu.map_event = armv7_a5_map_event;
return &armv7pmu;
}
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
{
armv7pmu.name = "ARMv7 Cortex-A15";
armv7pmu.map_event = armv7_a15_map_event;
return &armv7pmu;
}
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
{
armv7pmu.name = "ARMv7 Cortex-A7";
armv7pmu.map_event = armv7_a7_map_event;
return &armv7pmu;
}
#else
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
{
return NULL;
}
static int xscale_map_event(struct perf_event *event)
{
- return map_cpu_event(event, &xscale_perf_map,
+ return armpmu_map_event(event, &xscale_perf_map,
&xscale_perf_cache_map, 0xFF);
}
.max_period = (1LLU << 32) - 1,
};
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
{
return &xscale1pmu;
}
.max_period = (1LLU << 32) - 1,
};
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
{
return NULL;
}
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
{
return NULL;
}
+++ /dev/null
-/*
- * linux/arch/arm/kernel/pmu.c
- *
- * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- * Copyright (C) 2010 ARM Ltd, Will Deacon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/pmu.h>
-
-/*
- * PMU locking to ensure mutual exclusion between different subsystems.
- */
-static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-
-int
-reserve_pmu(enum arm_pmu_type type)
-{
- return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
-}
-EXPORT_SYMBOL_GPL(reserve_pmu);
-
-void
-release_pmu(enum arm_pmu_type type)
-{
- clear_bit_unlock(type, pmu_lock);
-}
-EXPORT_SYMBOL_GPL(release_pmu);
unflatten_device_tree();
#ifdef CONFIG_SMP
- if (is_smp())
+ if (is_smp()) {
+ smp_set_ops(mdesc->smp);
smp_init_cpus();
+ }
#endif
reserve_crashkernel();
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
-#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/completion.h>
#include <linux/atomic.h>
+#include <asm/smp.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
+#include <asm/mach/arch.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
*/
struct secondary_data secondary_data;
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
enum ipi_msg_type {
IPI_TIMER = 2,
IPI_RESCHEDULE,
static DECLARE_COMPLETION(cpu_running);
+static struct smp_operations smp_ops;
+
+void __init smp_set_ops(struct smp_operations *ops)
+{
+ if (ops)
+ smp_ops = *ops;
+};
+
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
return ret;
}
+/* platform specific SMP operations */
+void __init smp_init_cpus(void)
+{
+ if (smp_ops.smp_init_cpus)
+ smp_ops.smp_init_cpus();
+}
+
+static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ if (smp_ops.smp_prepare_cpus)
+ smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ if (smp_ops.smp_secondary_init)
+ smp_ops.smp_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (smp_ops.smp_boot_secondary)
+ return smp_ops.smp_boot_secondary(cpu, idle);
+ return -ENOSYS;
+}
+
#ifdef CONFIG_HOTPLUG_CPU
static void percpu_timer_stop(void);
+static int platform_cpu_kill(unsigned int cpu)
+{
+ if (smp_ops.cpu_kill)
+ return smp_ops.cpu_kill(cpu);
+ return 1;
+}
+
+static void platform_cpu_die(unsigned int cpu)
+{
+ if (smp_ops.cpu_die)
+ smp_ops.cpu_die(cpu);
+}
+
+static int platform_cpu_disable(unsigned int cpu)
+{
+ if (smp_ops.cpu_disable)
+ return smp_ops.cpu_disable(cpu);
+
+ /*
+ * By default, allow disabling all CPUs except the first one,
+ * since this is special on a lot of platforms, e.g. because
+ * of clock tick interrupts.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
/*
* __cpu_disable runs on the processor to be shutdown.
*/
-int __cpu_disable(void)
+int __cpuinit __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
int ret;
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
-void __cpu_die(unsigned int cpu)
+void __cpuinit __cpu_die(unsigned int cpu)
{
if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
pr_err("CPU%u: cpu didn't die\n", cpu);
#endif
instr = *(u32 *) pc;
} else if (thumb_mode(regs)) {
- get_user(instr, (u16 __user *)pc);
+ if (get_user(instr, (u16 __user *)pc))
+ goto die_sig;
if (is_wide_instruction(instr)) {
unsigned int instr2;
- get_user(instr2, (u16 __user *)pc+1);
+ if (get_user(instr2, (u16 __user *)pc+1))
+ goto die_sig;
instr <<= 16;
instr |= instr2;
}
- } else {
- get_user(instr, (u32 __user *)pc);
+ } else if (get_user(instr, (u32 __user *)pc)) {
+ goto die_sig;
}
if (call_undef_hook(regs, instr) == 0)
return;
+die_sig:
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
{
pr_info("Switching to timer-based delay loop\n");
lpj_fine = freq / HZ;
+ loops_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
* __get_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* Outputs: r0 is the error code
- * r2, r3 contains the zero-extended value
+ * r2 contains the zero-extended value
* lr corrupted
*
* No other registers must be altered. (see <asm/uaccess.h>
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
+ check_uaccess r0, 1, r1, r2, __get_user_bad
1: TUSER(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb) r2, [r0]
-3: TUSER(ldrb) r3, [r0, #1]
+ check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb .req ip
+2: ldrbt r2, [r0], #1
+3: ldrbt rb, [r0], #0
#else
-2: TUSER(ldrb) r2, [r0], #1
-3: TUSER(ldrb) r3, [r0]
+rb .req r0
+2: ldrb r2, [r0]
+3: ldrb rb, [r0, #1]
#endif
#ifndef __ARMEB__
- orr r2, r2, r3, lsl #8
+ orr r2, r2, rb, lsl #8
#else
- orr r2, r3, r2, lsl #8
+ orr r2, rb, r2, lsl #8
#endif
mov r0, #0
mov pc, lr
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
+ check_uaccess r0, 4, r1, r2, __get_user_bad
4: TUSER(ldr) r2, [r0]
mov r0, #0
mov pc, lr
* __put_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* r2, r3 contains the value
* Outputs: r0 is the error code
* lr corrupted
* Note also that it is intended that __put_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__put_user_1)
+ check_uaccess r0, 1, r1, ip, __put_user_bad
1: TUSER(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
ENTRY(__put_user_2)
+ check_uaccess r0, 2, r1, ip, __put_user_bad
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
+ check_uaccess r0, 4, r1, ip, __put_user_bad
4: TUSER(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
+ check_uaccess r0, 8, r1, ip, __put_user_bad
#ifdef CONFIG_THUMB2_KERNEL
5: TUSER(str) r2, [r0]
6: TUSER(str) r3, [r0, #4]
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <media/atmel-isi.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include "generic.h"
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+ __raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
cpu_do_idle();
}
#include <mach/at91_tc.h>
#define at91_tc_read(field) \
- __raw_readl(AT91_TC + field)
+ __raw_readl(AT91_IO_P2V(AT91_TC) + field)
#define at91_tc_write(field, value) \
- __raw_writel(value, AT91_TC + field);
+ __raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
/*
* 3 counter/timer units present.
+++ /dev/null
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
- unsigned int nr_channels;
- dma_cap_mask_t cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @cfg: Platform-specific initializer for the CFG register
- */
-struct at_dma_slave {
- struct device *dma_dev;
- u32 cfg;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
-#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
-#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
-#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
-#define ATC_SRC_H2SEL_SW (0x0 << 9)
-#define ATC_SRC_H2SEL_HW (0x1 << 9)
-#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
-#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
-#define ATC_DST_H2SEL_SW (0x0 << 13)
-#define ATC_DST_H2SEL_HW (0x1 << 13)
-#define ATC_SOD (0x1 << 16) /* Stop On Done */
-#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
-#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
-#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
-#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
-#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
-#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
-#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
-#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
-#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
-#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
-
-
-#endif /* AT_HDMAC_H */
#ifndef __MACH_ATMEL_MCI_H
#define __MACH_ATMEL_MCI_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
/**
* struct mci_dma_data - DMA data for MCI interface
* to 0xFEF78000 .. 0xFF000000. (544Kb)
*/
#define AT91_IO_PHYS_BASE 0xFFF78000
-#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
+#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE)
#else
/*
* Identity mapping for the non MMU case.
*/
#define AT91_IO_PHYS_BASE AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE
+#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE)
#endif
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
0,
};
-static inline const u32* decomp_soc_detect(u32 dbgu_base)
+static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
{
u32 cidr, socid;
int i = 0;
const u32* usarts;
- usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+ usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
if (!usarts)
- usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+ usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
if (!usarts) {
at91_uart = NULL;
return;
{
struct map_desc *desc = &sram_desc[bank];
- desc->virtual = AT91_IO_VIRT_BASE - length;
+ desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length;
if (bank > 0)
desc->virtual -= sram_desc[bank - 1].length;
}
static struct map_desc at91_io_desc __initdata = {
- .virtual = AT91_VA_BASE_SYS,
+ .virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
--- /dev/null
+obj-y += bcm2835.o
--- /dev/null
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irqchip/bcm2835.h>
+#include <linux/of_platform.h>
+#include <linux/bcm2835_timer.h>
+#include <linux/clk/bcm2835.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/bcm2835_soc.h>
+
+static struct map_desc io_map __initdata = {
+ .virtual = BCM2835_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
+ .length = BCM2835_PERIPH_SIZE,
+ .type = MT_DEVICE
+};
+
+void __init bcm2835_map_io(void)
+{
+ iotable_init(&io_map, 1);
+}
+
+void __init bcm2835_init(void)
+{
+ int ret;
+
+ bcm2835_init_clocks();
+
+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ NULL);
+ if (ret) {
+ pr_err("of_platform_populate failed: %d\n", ret);
+ BUG();
+ }
+}
+
+static const char * const bcm2835_compat[] = {
+ "brcm,bcm2835",
+ NULL
+};
+
+DT_MACHINE_START(BCM2835, "BCM2835")
+ .map_io = bcm2835_map_io,
+ .init_irq = bcm2835_init_irq,
+ .handle_irq = bcm2835_handle_irq,
+ .init_machine = bcm2835_init,
+ .timer = &bcm2835_timer,
+ .dt_compat = bcm2835_compat
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * Derived from code:
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_BCM2835_BCM2835_SOC_H__
+#define __MACH_BCM2835_BCM2835_SOC_H__
+
+#include <asm/sizes.h>
+
+#define BCM2835_PERIPH_PHYS 0x20000000
+#define BCM2835_PERIPH_VIRT 0xf0000000
+#define BCM2835_PERIPH_SIZE SZ_16M
+#define BCM2835_DEBUG_PHYS 0x20201000
+#define BCM2835_DEBUG_VIRT 0xf0201000
+
+#endif
--- /dev/null
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/bcm2835_soc.h>
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =BCM2835_DEBUG_PHYS
+ ldr \rv, =BCM2835_DEBUG_VIRT
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
--- /dev/null
+/*
+ * BCM2835 system clock frequency
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE (1000000)
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/bcm2835_soc.h>
+
+#define UART0_BASE BCM2835_DEBUG_PHYS
+
+#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
+#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
+#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
+
+static inline void putc(int c)
+{
+ while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
+ barrier();
+
+ __raw_writel(c, BCM2835_UART_DR);
+}
+
+static inline void flush(void)
+{
+ int fr;
+
+ do {
+ fr = __raw_readl(BCM2835_UART_FR);
+ barrier();
+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
-#include <asm/pmu.h>
#include <asm/mach/arch.h>
#include <mach/dma.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include "core.h"
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.resource = &pmu_resource,
.num_resources = 1,
};
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include "clock.h"
-#include <csp/secHw.h>
#include <mach/csp/secHw_def.h>
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/export.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/reg.h>
-#include <csp/delay.h>
+#include <mach/csp/reg.h>
+#include <linux/delay.h>
/* ---- Private Constants and Types --------------------------------------- */
/****************************************************************************/
chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
) {
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
- volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
+ uint32_t __iomem *pDependentClock = NULL;
uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
uint32_t dependentClockType = 0;
uint32_t vcoHz = 0;
/* Get VCO frequencies */
- if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
uint64_t adjustFreq = 0;
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
} else {
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
}
vcoFreqPll2Hz =
chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
switch (clock) {
if (pPLLReg) {
/* Obtain PLL clock frequency */
- if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ if (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
/* Return crystal clock frequency when bypassed */
return chipcHw_XTAL_FREQ_Hz;
} else if (clock == chipcHw_CLOCK_DDR) {
/* DDR frequency is configured in PLLDivider register */
- return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ return chipcHw_divide (vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256));
} else {
/* From chip revision number B0, LCD clock is internally divided by 2 */
if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
vcoHz >>= 1;
}
/* Obtain PLL clock frequency using VCO dividers */
- return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ return chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
}
} else if (pClockCtrl) {
/* Obtain divider clock frequency */
uint32_t div;
uint32_t freq = 0;
- if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ if (readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
/* Return crystal clock frequency when bypassed */
return chipcHw_XTAL_FREQ_Hz;
} else if (pDependentClock) {
/* Identify the dependent clock frequency */
switch (dependentClockType) {
case PLL_CLOCK:
- if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ if (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
/* Use crystal clock frequency when dependent PLL clock is bypassed */
freq = chipcHw_XTAL_FREQ_Hz;
} else {
/* Obtain PLL clock frequency using VCO dividers */
- div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+ div = readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
freq = div ? chipcHw_divide(vcoHz, div) : 0;
}
break;
case NON_PLL_CLOCK:
- if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ if (pDependentClock == &pChipcHw->ACLKClock) {
freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
} else {
- if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ if (readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
/* Use crystal clock frequency when dependent divider clock is bypassed */
freq = chipcHw_XTAL_FREQ_Hz;
} else {
/* Obtain divider clock frequency using XTAL dividers */
- div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
}
}
freq = chipcHw_XTAL_FREQ_Hz;
}
- div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ div = readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
return chipcHw_divide(freq, (div ? div : 256));
}
return 0;
chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
uint32_t freq /* [ IN ] Clock frequency in Hz */
) {
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
- volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
+ uint32_t __iomem *pDependentClock = NULL;
uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */
uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
uint32_t desVcoHz = 0;
/* Get VCO frequencies */
- if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
uint64_t adjustFreq = 0;
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
/* Desired VCO frequency */
desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ (((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
} else {
vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
}
vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
switch (clock) {
{
REG_LOCAL_IRQ_SAVE;
/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
- pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
- << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ writel((readl(&pChipcHw->DDRClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->DDRClock);
REG_LOCAL_IRQ_RESTORE;
}
pPLLReg = &pChipcHw->DDRClock;
/* Configure the VPM:BUS ratio settings */
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
- << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->VPMClock);
REG_LOCAL_IRQ_RESTORE;
}
pPLLReg = &pChipcHw->VPMClock;
/* For DDR settings use only the PLL divider clock */
if (pPLLReg == &pChipcHw->DDRClock) {
/* Set M1DIV for PLL1, which controls the DDR clock */
- reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+ reg32_write(&pChipcHw->PLLDivider, (readl(&pChipcHw->PLLDivider) & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
/* Calculate expected frequency */
- freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ freq = chipcHw_divide(vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256));
} else {
/* From chip revision number B0, LCD clock is internally divided by 2 */
if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
/* Calculate expected frequency */
- freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ freq = chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
}
/* Wait for for atleast 200ns as per the protocol to change frequency */
udelay(1);
if (pDependentClock) {
switch (dependentClockType) {
case PLL_CLOCK:
- divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+ divider = chipcHw_divide(chipcHw_divide (desVcoHz, (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
break;
case NON_PLL_CLOCK:
{
uint32_t sourceClock = 0;
- if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ if (pDependentClock == &pChipcHw->ACLKClock) {
sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
} else {
- uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ uint32_t div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
}
divider = chipcHw_divide(sourceClock, freq);
if (divider) {
REG_LOCAL_IRQ_SAVE;
/* Set the divider to obtain the required frequency */
- *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+ writel((readl(pClockCtrl) & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK), pClockCtrl);
REG_LOCAL_IRQ_RESTORE;
return freq;
}
int count = 0;
for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
- phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+ phaseControl = (readl(&pChipcHw->VPMClock) & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
phaseValue = 0;
prevPhaseComp = 0;
/* Step 1: Look for falling PH_COMP transition */
/* Read the contents of VPM Clock resgister */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
do {
/* Store previous value of phase comparator */
prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Read the contents of VPM Clock resgister. */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
phaseControl = (0x3F & (phaseControl - 1));
for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
phaseControl = (0x3F & (phaseControl + 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
phaseControl = (0x3F & (phaseControl - 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
for (count = 0; (count < 5); count++) {
phaseControl = (0x3F & (phaseControl - 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
/* Store previous value of phase comparator */
prevPhaseComp = phaseValue;
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^=
- chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Read the contents of VPM Clock resgister. */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
phaseControl = (0x3F & (phaseControl - 1));
}
/* For VPM Phase should be perfectly aligned. */
- phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+ phaseControl = (((readl(&pChipcHw->VPMClock) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+ writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT), &pChipcHw->VPMClock);
/* Load new phase value */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
REG_LOCAL_IRQ_RESTORE;
}
int adjustCount = 0;
/* Disable VPM access */
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
/* Disable HW VPM phase alignment */
chipcHw_vpmHwPhaseAlignDisable();
/* Enable SW VPM phase alignment */
phaseControl--;
} else {
/* Enable VPM access */
- pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
/* Return adjust count */
return adjustCount;
}
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Count adjustment */
adjustCount++;
}
}
/* Disable VPM access */
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
return -1;
}
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/export.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/reg.h>
-#include <csp/delay.h>
+#include <mach/csp/reg.h>
+#include <linux/delay.h>
/* ---- Private Constants and Types --------------------------------------- */
/*
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig2 =
- chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET,
+ &pChipcHw->PLLConfig2);
pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
/* Enable CHIPC registers to control the PLL */
- pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+ writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
/* Set pre divider to get desired VCO frequency */
- pChipcHw->PLLPreDivider2 = pllPreDivider2;
+ writel(pllPreDivider2, &pChipcHw->PLLPreDivider2);
/* Set NDIV Frac */
- pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2);
/* This has to be removed once the default values are fixed for PLL2. */
- pChipcHw->PLLControl12 = 0x38000700;
- pChipcHw->PLLControl22 = 0x00000015;
+ writel(0x38000700, &pChipcHw->PLLControl12);
+ writel(0x00000015, &pChipcHw->PLLControl22);
/* Reset PLL2 */
if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
chipcHw_REG_PLL_CONFIG_A_RESET |
chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
} else {
- pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
chipcHw_REG_PLL_CONFIG_A_RESET |
chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
}
REG_LOCAL_IRQ_RESTORE;
}
{
REG_LOCAL_IRQ_SAVE;
/* Remove analog reset and Power on the PLL */
- pChipcHw->PLLConfig2 &=
+ writel(readl(&pChipcHw->PLLConfig2) &
~(chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN),
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
/* Wait until PLL is locked */
- while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
;
{
REG_LOCAL_IRQ_SAVE;
/* Remove digital reset */
- pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ writel(readl(&pChipcHw->PLLConfig2) &
+ ~chipcHw_REG_PLL_CONFIG_D_RESET,
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig =
- chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET,
+ &pChipcHw->PLLConfig);
/* Setting VCO frequency */
if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
pllPreDivider =
}
/* Enable CHIPC registers to control the PLL */
- pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+ writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
/* Set pre divider to get desired VCO frequency */
- pChipcHw->PLLPreDivider = pllPreDivider;
+ writel(pllPreDivider, &pChipcHw->PLLPreDivider);
/* Set NDIV Frac */
if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
- pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
- chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+ writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider);
} else {
- pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
- chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider);
}
/* Reset PLL1 */
if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
} else {
- pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
}
REG_LOCAL_IRQ_RESTORE;
{
REG_LOCAL_IRQ_SAVE;
/* Remove analog reset and Power on the PLL */
- pChipcHw->PLLConfig &=
- ~(chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
/* Wait until PLL is locked */
- while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
- || !(pChipcHw->
- PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED)
+ || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
;
/* Remove digital reset */
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
}
chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
- pChipcHw->ACLKClock =
- (pChipcHw->
- ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
- armBusRatio &
- chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+ writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock);
/* Set various core component frequencies. The order in which this is done is important for some. */
/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
*****************************************************************************/
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
+#include <linux/types.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/intcHw.h>
-#include <csp/cache.h>
+#include <mach/csp/intcHw_reg.h>
+#include <asm/cacheflush.h>
/* ---- Private Constants and Types --------------------------------------- */
/* ---- Private Variables ------------------------------------------------- */
chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
/* Bypass the PLL clocks before reboot */
- pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
- pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+ writel(readl(&pChipcHw->UARTClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT,
+ &pChipcHw->UARTClock);
+ writel(readl(&pChipcHw->SPIClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT,
+ &pChipcHw->SPIClock);
/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
do {
- ((uint32_t *) MM_IO_BASE_ARAM)[i] =
- ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+ writel(((uint32_t *) &chipcHw_reset_run_from_aram)[i], ((uint32_t __iomem *) MM_IO_BASE_ARAM) + i);
i++;
- } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
+ } while (readl(((uint32_t __iomem*) MM_IO_BASE_ARAM) + i - 1) != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
- CSP_CACHE_FLUSH_ALL;
+ flush_cache_all();
/* run the function from ARAM */
runFunc();
/****************************************************************************/
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/string.h>
-#include <stddef.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/stddef.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/csp/dmacHw_reg.h>
#include <mach/csp/dmacHw_priv.h>
#include <mach/csp/chipcHw_inline.h>
) {
uint32_t val = 0;
dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
- dmacHw_MISC_t *pMiscReg =
- (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+ dmacHw_MISC_t __iomem *pMiscReg = (void __iomem *)dmacHw_REG_MISC_BASE(pCblk->module);
switch (pCblk->channel) {
case 0:
- val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm2.lo) & 0x70000000) >> 28;
break;
case 1:
- val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm3.hi) & 0x70000000) >> 28;
break;
case 2:
- val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm3.lo) & 0x70000000) >> 28;
break;
case 3:
- val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm4.hi) & 0x70000000) >> 28;
break;
case 4:
- val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm4.lo) & 0x70000000) >> 28;
break;
case 5:
- val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm5.hi) & 0x70000000) >> 28;
break;
case 6:
- val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm5.lo) & 0x70000000) >> 28;
break;
case 7:
- val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm6.hi) & 0x70000000) >> 28;
break;
}
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <stddef.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/csp/dmacHw_reg.h>
#include <mach/csp/dmacHw_priv.h>
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
+#include <linux/errno.h>
+#include <linux/types.h>
-#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw.h>
#include <mach/csp/tmrHw_reg.h>
#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0
+++ /dev/null
-#ifndef _CFG_GLOBAL_H_
-#define _CFG_GLOBAL_H_
-
-#include <cfg_global_defines.h>
-
-#define CFG_GLOBAL_CHIP BCM11107
-#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
-#define CFG_GLOBAL_CHIP_REV 0xB0
-#define CFG_GLOBAL_RAM_SIZE 0x10000000
-#define CFG_GLOBAL_RAM_BASE 0x00000000
-#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
-
-#endif /* _CFG_GLOBAL_H_ */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CFG_GLOBAL_DEFINES_H
-#define CFG_GLOBAL_DEFINES_H
-
-/* CHIP */
-#define BCM1103 1
-
-#define BCM1191 4
-#define BCM2153 5
-#define BCM2820 6
-
-#define BCM2826 8
-#define FPGA11107 9
-#define BCM11107 10
-#define BCM11109 11
-#define BCM11170 12
-#define BCM11110 13
-#define BCM11211 14
-
-/* CFG_GLOBAL_CHIP_FAMILY types */
-#define CFG_GLOBAL_CHIP_FAMILY_NONE 0
-#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2
-#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4
-#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8
-
-#define IMAGE_HEADER_SIZE_CHECKSUM 4
-#endif
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_CACHE_H
-#define CSP_CACHE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <asm/cacheflush.h>
-
-#define CSP_CACHE_FLUSH_ALL flush_cache_all()
-
-#else
-
-#define CSP_CACHE_FLUSH_ALL
-
-#endif
-
-#endif /* CSP_CACHE_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_DELAY_H
-#define CSP_DELAY_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-/* Some CSP routines require use of the following delay routines. Use the OS */
-/* version if available, otherwise use a CSP specific definition. */
-/* void udelay(unsigned long usecs); */
-/* void mdelay(unsigned long msecs); */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
- #include <linux/delay.h>
-#else
- #include <mach/csp/delay.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_DELAY_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file dmacHw.h
-*
-* @brief API definitions for low level DMA controller driver
-*
-*/
-/****************************************************************************/
-#ifndef _DMACHW_H
-#define _DMACHW_H
-
-#include <stddef.h>
-
-#include <csp/stdint.h>
-#include <mach/csp/dmacHw_reg.h>
-
-/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
-
- System specific channel ID should be defined as follows
-
- For example:
-
- #include <dmacHw.h>
- ...
- #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
- #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
- #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
- #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
- #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
- ...
- #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
- #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
- #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
- ...
-*/
-#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
-
-typedef enum {
- dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
- dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
- dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
- dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
- dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
- dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
- dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
- dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
-} dmacHw_CHANNEL_PRIORITY_e;
-
-/* Source destination master interface */
-typedef enum {
- dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
- dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
- dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
- dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
-} dmacHw_MASTER_INTERFACE_e;
-
-typedef enum {
- dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
- dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
- dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
- dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
- dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
- dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
- dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
- dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
-} dmacHw_TRANSACTION_WIDTH_e;
-
-typedef enum {
- dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
- dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
- dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
- dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
- dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
- dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
- dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
- dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-} dmacHw_BURST_WIDTH_e;
-
-typedef enum {
- dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
- dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
- dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
- dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
-} dmacHw_TRANSFER_TYPE_e;
-
-typedef enum {
- dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
- dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
- dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
-} dmacHw_TRANSFER_MODE_e;
-
-typedef enum {
- dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
- dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
- dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
- dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
- dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
- dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
-} dmacHw_ADDRESS_UPDATE_MODE_e;
-
-typedef enum {
- dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
- dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
-} dmacHw_FLOW_CONTROL_e;
-
-typedef enum {
- dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
- dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
- dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
-} dmacHw_TRANSFER_STATUS_e;
-
-typedef enum {
- dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
- dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
-} dmacHw_INTERRUPT_e;
-
-typedef enum {
- dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
- dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
- dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
- dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
-} dmacHw_INTERRUPT_STATUS_e;
-
-typedef enum {
- dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
- dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
- dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
- dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
- dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
-} dmacHw_CONTROLLER_ATTRIB_e;
-
-typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
-typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
- "dmacHw_MAKE_CHANNEL_ID" macro
- */
-/* DMA channel configuration parameters */
-typedef struct {
- uint32_t srcPeripheralPort; /* Source peripheral port */
- uint32_t dstPeripheralPort; /* Destination peripheral port */
- uint32_t srcStatusRegisterAddress; /* Source status register address */
- uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
-
- uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
- uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
- uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
- uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
- uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
- 0 = Maximum possible.
- */
-
- dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
- dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
- dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
- dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
- dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
- dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
- dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
- dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
- dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
- dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
- dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
- dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
- dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
- dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
- dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
-} dmacHw_CONFIG_t;
-
-/****************************************************************************/
-/**
-* @brief Initializes DMA
-*
-* This function initializes DMA CSP driver
-*
-* @note
-* Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void);
-
-/****************************************************************************/
-/**
-* @brief Exit function for DMA
-*
-* This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void);
-
-/****************************************************************************/
-/**
-* @brief Gets a handle to a DMA channel
-*
-* This function returns a handle, representing a control block of a particular DMA channel
-*
-* @return -1 - On Failure
-* handle - On Success, representing a channel control block
-*
-* @note
-* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
- );
-
-/****************************************************************************/
-/**
-* @brief Initializes a DMA channel for use
-*
-* This function initializes and resets a DMA channel for use
-*
-* @return -1 - On Failure
-* 0 - On Success
-*
-* @note
-* None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-* @return On failure : -1
-* On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
- void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
- size_t dataLen /* [ IN ] Data length in bytes */
- );
-
-/****************************************************************************/
-/**
-* @brief Initializes descriptor ring
-*
-* This function will initializes the descriptor ring of a DMA channel
-*
-*
-* @return -1 - On failure
-* 0 - On success
-* @note
-* - "len" parameter should be obtained from "dmacHw_descriptorLen"
-* - Descriptor buffer MUST be 32 bit aligned and uncached as it
-* is accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
- uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
- uint32_t len, /* [ IN ] Size of the pBuf */
- uint32_t num /* [ IN ] Number of descriptor in the ring */
- );
-
-/****************************************************************************/
-/**
-* @brief Finds amount of memory required to form a descriptor ring
-*
-*
-* @return Number of bytes required to form a descriptor ring
-*
-*
-* @note
-* None
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
- );
-
-/****************************************************************************/
-/**
-* @brief Configure DMA channel
-*
-* @return 0 : On success
-* -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
- );
-
-/****************************************************************************/
-/**
-* @brief Set descriptors for known data length
-*
-* When DMA has to work as a flow controller, this function prepares the
-* descriptor chain to transfer data
-*
-* from:
-* - Memory to memory
-* - Peripheral to memory
-* - Memory to Peripheral
-* - Peripheral to Peripheral
-*
-* @return -1 - On failure
-* 0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
- void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
- size_t dataLen /* [ IN ] Length in bytes */
- );
-
-/****************************************************************************/
-/**
-* @brief Indicates whether DMA transfer is in progress or completed
-*
-* @return DMA transfer status
-* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
-* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
-* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Set descriptor carrying control information
-*
-* This function will be used to send specific control information to the device
-* using the DMA channel
-*
-*
-* @return -1 - On failure
-* 0 - On success
-*
-* @note
-* None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- uint32_t ctlAddress, /* [ IN ] Address of the device control register */
- uint32_t control /* [ IN ] Device control information */
- );
-
-/****************************************************************************/
-/**
-* @brief Read data DMA transferred to memory
-*
-* This function will read data that has been DMAed to memory while transferring from:
-* - Memory to memory
-* - Peripheral to memory
-*
-* @return 0 - No more data is available to read
-* 1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- void **ppBbuf, /* [ OUT ] Data received */
- size_t *pLlen /* [ OUT ] Length of the data received */
- );
-
-/****************************************************************************/
-/**
-* @brief Prepares descriptor ring, when source peripheral working as a flow controller
-*
-* This function will form the descriptor ring by allocating buffers, when source peripheral
-* has to work as a flow controller to transfer data from:
-* - Peripheral to memory.
-*
-* @return -1 - On failure
-* 0 - On success
-*
-*
-* @note
-* None
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- uint32_t srcAddr, /* [ IN ] Source peripheral address */
- void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
- int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
- int num /* [ IN ] Number of descriptor to set */
- );
-
-/****************************************************************************/
-/**
-* @brief Program channel register to initiate transfer
-*
-* @return void
-*
-*
-* @note
-* - Descriptor buffer MUST ALWAYS be flushed before calling this function
-* - This function should also be called from ISR to program the channel with
-* pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor /* [ IN ] Descriptor buffer */
- );
-
-/****************************************************************************/
-/**
-* @brief Resets descriptor control information
-*
-* @return void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
- );
-
-/****************************************************************************/
-/**
-* @brief Program channel register to stop transfer
-*
-* Ensures the channel is not doing any transfer after calling this function
-*
-* @return void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Check the existence of pending descriptor
-*
-* This function confirmes if there is any pending descriptor in the chain
-* to program the channel
-*
-* @return 1 : Channel need to be programmed with pending descriptor
-* 0 : No more pending descriptor to programe the channel
-*
-* @note
-* - This function should be called from ISR in case there are pending
-* descriptor to program the channel.
-*
-* Example:
-*
-* dmac_isr ()
-* {
-* ...
-* if (dmacHw_descriptorPending (handle))
-* {
-* dmacHw_initiateTransfer (handle);
-* }
-* }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- void *pDescriptor /* [ IN ] Descriptor buffer */
- );
-
-/****************************************************************************/
-/**
-* @brief Deallocates source or destination memory, allocated
-*
-* This function can be called to deallocate data memory that was DMAed successfully
-*
-* @return -1 - On failure
-* 0 - On success
-*
-* @note
-* This function will be called ONLY, when source OR destination address is pointing
-* to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
- );
-
-/****************************************************************************/
-/**
-* @brief Clears the interrupt
-*
-* This function clears the DMA channel specific interrupt
-*
-* @return N/A
-*
-* @note
-* Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Returns the cause of channel specific DMA interrupt
-*
-* This function returns the cause of interrupt
-*
-* @return Interrupt status, each bit representing a specific type of interrupt
-* of type dmacHw_INTERRUPT_STATUS_e
-* @note
-* This function should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Indentifies a DMA channel causing interrupt
-*
-* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-* @return NULL : No channel causing DMA interrupt
-* ! NULL : Handle to a channel causing DMA interrupt
-* @note
-* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-* @brief Sets channel specific user data
-*
-* This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- void *userData /* [ IN ] User data */
- );
-
-/****************************************************************************/
-/**
-* @brief Gets channel specific user data
-*
-* This function returns user data specific to a DMA channel
-*
-* @return user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
- );
-
-/****************************************************************************/
-/**
-* @brief Displays channel specific registers and other control parameters
-*
-*
-* @return void
-*
-* @note
-* None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- void *pDescriptor, /* [ IN ] Descriptor buffer */
- int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
- );
-
-/****************************************************************************/
-/**
-* @brief Provides DMA controller attributes
-*
-*
-* @return DMA controller attributes
-*
-* @note
-* None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
- );
-
-#endif /* _DMACHW_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_ERRNO_H
-#define CSP_ERRNO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if defined(__KERNEL__)
-#include <linux/errno.h>
-#elif defined(CSP_SIMULATION)
-#include <asm-generic/errno.h>
-#else
-#include <errno.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_ERRNO_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-/****************************************************************************/
-/**
-* @file intcHw.h
-*
-* @brief generic interrupt controller API
-*
-* @note
-* None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_H
-#define _INTCHW_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/intcHw_reg.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask);
-static inline void intcHw_irq_enable(void *basep, uint32_t mask);
-
-#endif /* _INTCHW_H */
-
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_MODULE_H
-#define CSP_MODULE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
- #include <linux/module.h>
-#else
- #define EXPORT_SYMBOL(symbol)
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_MODULE_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file reg.h
-*
-* @brief Generic register definitions used in CSP
-*/
-/****************************************************************************/
-
-#ifndef CSP_REG_H
-#define CSP_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define __REG32(x) (*((volatile uint32_t *)(x)))
-#define __REG16(x) (*((volatile uint16_t *)(x)))
-#define __REG8(x) (*((volatile uint8_t *) (x)))
-
-/* Macros used to define a sequence of reserved registers. The start / end */
-/* are byte offsets in the particular register definition, with the "end" */
-/* being the offset of the next un-reserved register. E.g. if offsets */
-/* 0x10 through to 0x1f are reserved, then this reserved area could be */
-/* specified as follows. */
-/* typedef struct */
-/* { */
-/* uint32_t reg1; offset 0x00 */
-/* uint32_t reg2; offset 0x04 */
-/* uint32_t reg3; offset 0x08 */
-/* uint32_t reg4; offset 0x0c */
-/* REG32_RSVD(0x10, 0x20); */
-/* uint32_t reg5; offset 0x20 */
-/* ... */
-/* } EXAMPLE_REG_t; */
-#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
-#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
-#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
-/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */
-/* flags variable to be declared locally. */
-/* e.g. */
-/* statement1; */
-/* { */
-/* REG_LOCAL_IRQ_SAVE; */
-/* <multiple statements here> */
-/* REG_LOCAL_IRQ_RESTORE; */
-/* } */
-/* statement2; */
-/* */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <mach/hardware.h>
-#include <linux/interrupt.h>
-
-#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \
- unsigned long flags; HW_IRQ_SAVE(reg32, flags)
-
-#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags)
-
-#else
-
-#define REG_LOCAL_IRQ_SAVE
-#define REG_LOCAL_IRQ_RESTORE
-
-#endif
-
-static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
-{
- REG_LOCAL_IRQ_SAVE;
- *reg &= value;
- REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
-{
- REG_LOCAL_IRQ_SAVE;
- *reg |= value;
- REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
- uint32_t value)
-{
- REG_LOCAL_IRQ_SAVE;
- *reg = (*reg & mask) | value;
- REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
-{
- *reg = value;
-}
-
-#endif /* CSP_REG_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file secHw.h
-*
-* @brief Definitions for accessing low level security features
-*
-*/
-/****************************************************************************/
-#ifndef SECHW_H
-#define SECHW_H
-
-typedef void (*secHw_FUNC_t) (void);
-
-typedef enum {
- secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */
- secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */
-} secHw_MODE;
-
-/****************************************************************************/
-/**
-* @brief Requesting to execute the function in secure mode
-*
-* This function requests the given function to run in secure mode
-*
-*/
-/****************************************************************************/
-void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */
- );
-
-/****************************************************************************/
-/**
-* @brief Sets the mode
-*
-* his function sets the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_SetMode(secHw_MODE /* Processor mode */
- );
-
-/****************************************************************************/
-/**
-* @brief Get the current mode
-*
-* This function retieves the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_GetMode(secHw_MODE *);
-
-#endif /* SECHW_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_STDINT_H
-#define CSP_STDINT_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_STDINT_H */
+++ /dev/null
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-
-#ifndef CSP_STRING_H
-#define CSP_STRING_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
- #include <linux/string.h>
-#else
- #include <string.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_STRING_H */
-
+++ /dev/null
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file tmrHw.h
-*
-* @brief API definitions for low level Timer driver
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_H
-#define _TMRHW_H
-
-#include <csp/stdint.h>
-
-typedef uint32_t tmrHw_ID_t; /* Timer ID */
-typedef uint32_t tmrHw_COUNT_t; /* Timer count */
-typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */
-typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */
-
-typedef enum {
- tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */
- tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */
-} tmrHw_INTERRUPT_STATUS_e;
-
-typedef enum {
- tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
- tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */
-} tmrHw_CAPABILITY_e;
-
-/****************************************************************************/
-/**
-* @brief Get timer capability
-*
-* This function returns various capabilities/attributes of a timer
-*
-* @return Numeric capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
- tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
-);
-
-/****************************************************************************/
-/**
-* @brief Configures a periodic timer in terms of timer interrupt rate
-*
-* This function initializes a periodic timer to generate specific number of
-* timer interrupt per second
-*
-* @return On success: Effective timer frequency
-* On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
- tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
-);
-
-/****************************************************************************/
-/**
-* @brief Configures a periodic timer to generate timer interrupt after
-* certain time interval
-*
-* This function initializes a periodic timer to generate timer interrupt
-* after every time interval in millisecond
-*
-* @return On success: Effective interval set in mili-second
-* On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
- tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-* @brief Configures a periodic timer to generate timer interrupt just once
-* after certain time interval
-*
-* This function initializes a periodic timer to generate a single ticks after
-* certain time interval in millisecond
-*
-* @return On success: Effective interval set in mili-second
-* On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
- tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-* @brief Configures a timer to run as a free running timer
-*
-* This function initializes a timer to run as a free running timer
-*
-* @return Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
- uint32_t divider /* [ IN ] Dividing the clock frequency */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-* @brief Starts a timer
-*
-* This function starts a preconfigured timer
-*
-* @return -1 - On Failure
-* 0 - On Success
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-* @brief Stops a timer
-*
-* This function stops a running timer
-*
-* @return -1 - On Failure
-* 0 - On Success
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-* @brief Gets current timer count
-*
-* This function returns the current timer value
-*
-* @return Current downcounting timer value
-*
-*/
-/****************************************************************************/
-tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-* @brief Gets timer count rate
-*
-* This function returns the number of counts per second
-*
-* @return Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-* @brief Enables timer interrupt
-*
-* This function enables the timer interrupt
-*
-* @return N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-* @brief Disables timer interrupt
-*
-* This function disable the timer interrupt
-*
-* @return N/A
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-* @brief Clears the interrupt
-*
-* This function clears the timer interrupt
-*
-* @return N/A
-*
-* @note
-* Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-* @brief Gets the interrupt status
-*
-* This function returns timer interrupt status
-*
-* @return Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-* @brief Indentifies a timer causing interrupt
-*
-* This functions returns a timer causing interrupt
-*
-* @return 0xFFFFFFFF : No timer causing an interrupt
-* ! 0xFFFFFFFF : timer causing an interrupt
-* @note
-* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-* @brief Displays specific timer registers
-*
-*
-* @return void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
- int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
-);
-
-/****************************************************************************/
-/**
-* @brief Use a timer to perform a busy wait delay for a number of usecs.
-*
-* @return N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
- unsigned long usecs /* [ IN ] usec to delay */
-) __attribute__ ((section(".aramtext")));
-
-#endif /* _TMRHW_H */
--- /dev/null
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107 10
+#define BCM11109 11
+#define BCM11170 12
+#define BCM11110 13
+#define BCM11211 14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE 0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM 4
+#endif
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#define CFG_GLOBAL_CHIP BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV 0xB0
+#define CFG_GLOBAL_RAM_SIZE 0x10000000
+#define CFG_GLOBAL_RAM_BASE 0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
/* ---- Include Files ---------------------------------------------------- */
#include <mach/csp/cap.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
/* ---- Public Constants and Types --------------------------------------- */
#define CAP_CONFIG0_VPM_DIS 0x00000001
/* ---- Include Files ----------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/errno.h>
-#include <csp/reg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <mach/csp/reg.h>
#include <mach/csp/chipcHw_reg.h>
/* ---- Public Constants and Types ---------------------------------------- */
/* ---- Include Files ----------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/reg.h>
+#include <linux/errno.h>
+#include <mach/csp/reg.h>
#include <mach/csp/chipcHw_reg.h>
#include <mach/csp/chipcHw_def.h>
/****************************************************************************/
static inline uint32_t chipcHw_getChipId(void)
{
- return pChipcHw->ChipId;
+ return readl(&pChipcHw->ChipId);
}
/****************************************************************************/
/****************************************************************************/
static inline void chipcHw_enableSpreadSpectrum(void)
{
- if ((pChipcHw->
- PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ if ((readl(&pChipcHw->
+ PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
- ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
- (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ writel((0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
(ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
- ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
- ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
- ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT),
+ &ddrcReg_PHY_ADDR_CTL_REGP->ssCfg);
+ writel(readl(&ddrcReg_PHY_ADDR_CTL_REGP->ssCtl) |
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE,
+ &ddrcReg_PHY_ADDR_CTL_REGP->ssCtl);
}
}
/****************************************************************************/
static inline uint32_t chipcHw_getChipProductId(void)
{
- return (pChipcHw->
- ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ return (readl(&pChipcHw->
+ ChipId) & chipcHw_REG_CHIPID_BASE_MASK) >>
chipcHw_REG_CHIPID_BASE_SHIFT;
}
/****************************************************************************/
static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
{
- return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+ return readl(&pChipcHw->ChipId) & chipcHw_REG_CHIPID_REV_MASK;
}
/****************************************************************************/
/****************************************************************************/
static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
{
- return pChipcHw->BusIntfClock;
+ return readl(&pChipcHw->BusIntfClock);
}
/****************************************************************************/
/* Deassert module soft reset */
REG_LOCAL_IRQ_SAVE;
- pChipcHw->SoftReset1 ^= ctrl1;
- pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ writel(readl(&pChipcHw->SoftReset1) ^ ctrl1, &pChipcHw->SoftReset1);
+ writel(readl(&pChipcHw->SoftReset2) ^ (ctrl2 &
+ (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2);
REG_LOCAL_IRQ_RESTORE;
}
uint32_t unhold = 0;
REG_LOCAL_IRQ_SAVE;
- pChipcHw->SoftReset1 |= ctrl1;
+ writel(readl(&pChipcHw->SoftReset1) | ctrl1, &pChipcHw->SoftReset1);
/* Mask out unhold request bits */
- pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ writel(readl(&pChipcHw->SoftReset2) | (ctrl2 &
+ (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2);
/* Process unhold requests */
if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
if (unhold) {
/* Make sure unhold request is effective */
- pChipcHw->SoftReset1 &= ~unhold;
+ writel(readl(&pChipcHw->SoftReset1) & ~unhold, &pChipcHw->SoftReset1);
}
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
static inline uint32_t chipcHw_getStickyBits(void)
{
- return pChipcHw->Sticky;
+ return readl(&pChipcHw->Sticky);
}
/****************************************************************************/
bits |= chipcHw_REG_STICKY_POR_BROM;
} else {
uint32_t sticky;
- sticky = pChipcHw->Sticky;
+ sticky = readl(pChipcHw->Sticky);
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_5;
}
}
- pChipcHw->Sticky = bits;
+ writel(bits, pChipcHw->Sticky);
REG_LOCAL_IRQ_RESTORE;
}
(chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
- uint32_t sticky = pChipcHw->Sticky;
+ uint32_t sticky = readl(&pChipcHw->Sticky);
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
mask &= ~chipcHw_REG_STICKY_GENERAL_5;
}
}
- pChipcHw->Sticky = bits | mask;
+ writel(bits | mask, &pChipcHw->Sticky);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
static inline uint32_t chipcHw_getSoftStraps(void)
{
- return pChipcHw->SoftStraps;
+ return readl(&pChipcHw->SoftStraps);
}
/****************************************************************************/
/****************************************************************************/
static inline uint32_t chipcHw_getPinStraps(void)
{
- return pChipcHw->PinStraps;
+ return readl(&pChipcHw->PinStraps);
}
/****************************************************************************/
/****************************************************************************/
static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
{
- return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ return (readl(chipcHw_REG_GPIO_MUX(pin))) &
(chipcHw_REG_GPIO_MUX_MASK <<
- chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin)) >>
chipcHw_REG_GPIO_MUX_POSITION(pin);
}
static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
chipcHw_OPTYPE_e type, int mode)
{
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
switch (clock) {
case chipcHw_CLOCK_DDR:
/****************************************************************************/
static inline int chipcHw_isSoftwareStrapsEnable(void)
{
- return pChipcHw->SoftStraps & 0x00000001;
+ return readl(&pChipcHw->SoftStraps) & 0x00000001;
}
/****************************************************************************/
/****************************************************************************/
static inline int chipcHw_isPllTestEnable(void)
{
- return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+ return readl(&pChipcHw->PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
/****************************************************************************/
static inline int chipcHw_isPll2TestEnable(void)
{
- return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+ return readl(&pChipcHw->PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
/****************************************************************************/
static inline uint8_t chipcHw_getPllTestSelected(void)
{
- return (uint8_t) ((pChipcHw->
- PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ return (uint8_t) ((readl(&pChipcHw->
+ PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
/****************************************************************************/
static inline uint8_t chipcHw_getPll2TestSelected(void)
{
- return (uint8_t) ((pChipcHw->
- PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ return (uint8_t) ((readl(&pChipcHw->
+ PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
static inline void chipcHw_pll1Disable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(readl(&pChipcHw->PLLConfig) | chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_pll2Disable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(readl(&pChipcHw->PLLConfig2) | chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE,
+ &pChipcHw->Spare1);
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE,
+ &pChipcHw->Spare1);
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_vpmSwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ writel(readl(&pChipcHw->VPMPhaseCtrl1) | chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE,
+ &pChipcHw->VPMPhaseCtrl1);
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_vpmHwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ writel(readl(&pChipcHw->VPMPhaseCtrl1) & ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE,
+ &pChipcHw->VPMPhaseCtrl1);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
/****************************************************************************/
static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
/****************************************************************************/
static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
}
/****************************************************************************/
static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
}
/****************************************************************************/
static inline uint32_t chipcHw_getDdrPhaseControl(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
}
/****************************************************************************/
static inline uint32_t chipcHw_getVpmPhaseControl(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
}
#define CHIPCHW_REG_H
#include <mach/csp/mm_io.h>
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/csp/ddrcReg.h>
#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
} chipcHw_REG_t;
-#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
-#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+#define pChipcHw ((chipcHw_REG_t __iomem *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical (MM_ADDR_IO_CHIPC)
#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
#define chipcHw_REG_CHIPID_BASE_SHIFT 12
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <csp/stdint.h>
+#include <mach/csp/reg.h>
+#include <linux/types.h>
#include <mach/csp/mm_io.h>
} ddrcReg_PHY_ADDR_CTL_REG_t;
#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
-#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t __iomem*) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
/* @todo These SS definitions are duplicates of ones below */
--- /dev/null
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.h
+*
+* @brief API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <linux/stddef.h>
+
+#include <linux/types.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+ System specific channel ID should be defined as follows
+
+ For example:
+
+ #include <dmacHw.h>
+ ...
+ #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
+ #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
+ #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
+ #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
+ #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
+ ...
+ #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
+ #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
+ #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
+ ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
+
+typedef enum {
+ dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
+ dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
+ dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
+ dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
+ dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
+ dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
+ dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
+ dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+ dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
+ dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
+ dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
+ dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+ dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+ dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
+ dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
+ dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+ dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
+ dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
+ dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+ dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
+ dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+ dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
+ dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
+ dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
+ dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
+ dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
+ dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
+ "dmacHw_MAKE_CHANNEL_ID" macro
+ */
+/* DMA channel configuration parameters */
+typedef struct {
+ uint32_t srcPeripheralPort; /* Source peripheral port */
+ uint32_t dstPeripheralPort; /* Destination peripheral port */
+ uint32_t srcStatusRegisterAddress; /* Source status register address */
+ uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
+
+ uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
+ uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+ uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
+ uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
+ uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
+ 0 = Maximum possible.
+ */
+
+ dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+ dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+ dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
+ dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
+ dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
+ dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
+ dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
+ dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
+ dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
+ dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
+ dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
+ dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
+ dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
+ dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
+ dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it
+* is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ );
+
+/****************************************************************************/
+/**
+* @brief Read data DMA transferred to memory
+*
+* This function will read data that has been DMAed to memory while transferring from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ );
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will form the descriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Check the existence of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+* of type dmacHw_INTERRUPT_STATUS_e
+* @note
+* This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specific DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ );
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+*
+* @return void
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ );
+
+#endif /* _DMACHW_H */
#ifndef _DMACHW_PRIV_H
#define _DMACHW_PRIV_H
-#include <csp/stdint.h>
+#include <linux/types.h>
/* Data type for DMA Link List Item */
typedef struct {
#ifndef _DMACHW_REG_H
#define _DMACHW_REG_H
-#include <csp/stdint.h>
+#include <linux/types.h>
#include <mach/csp/mm_io.h>
/* Data type for 64 bit little endian register */
} dmacHw_MISC_t;
/* Base registers */
-#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
-#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+#define dmacHw_0_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
extern uint32_t dmaChannelCount_0;
extern uint32_t dmaChannelCount_1;
/* Define channel specific registers */
-#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t __iomem*) ((char __iomem*)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
/* Raw interrupt status registers */
-#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
-#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
-#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
-#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
-#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
-#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+#define dmacHw_REG_INT_RAW_BASE(module) ((char __iomem *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
/* Interrupt status registers */
-#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
-#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
-#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
-#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
-#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
-#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+#define dmacHw_REG_INT_STAT_BASE(module) ((char __iomem*)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
/* Interrupt status registers */
-#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
-#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
-#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
-#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
-#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
-#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+#define dmacHw_REG_INT_MASK_BASE(module) ((char __iomem*)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
/* Interrupt clear registers */
-#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
-#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
-#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
-#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
-#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
-#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
-#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char __iomem*)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
/* Software handshaking registers */
-#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
-#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+#define dmacHw_REG_SW_HS_BASE(module) ((char __iomem*)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
/* Miscellaneous registers */
-#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
-#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
-#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
-#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
-#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
-#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
-#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
-#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
-#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
-#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
-#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
-#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
-#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
-#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
-#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+#define dmacHw_REG_MISC_BASE(module) ((char __iomem*)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
/* Channel control registers */
#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
/* ---- Include Files ---------------------------------------------------- */
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include <mach/csp/cap_inline.h>
#if defined(__KERNEL__)
#define _INTCHW_REG_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/reg.h>
+#include <linux/types.h>
+#include <mach/csp/reg.h>
#include <mach/csp/mm_io.h>
/* ---- Public Constants and Types --------------------------------------- */
#define INTCHW_NUM_INTC 3
/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
-#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0)
-#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1)
-#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC)
+#define INTCHW_INTC0 (MM_IO_BASE_INTC0)
+#define INTCHW_INTC1 (MM_IO_BASE_INTC1)
+#define INTCHW_SINTC (MM_IO_BASE_SINTC)
/* INTC0 - interrupt controller 0 */
#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */
/* ---- Public Variable Externs ------------------------------------------ */
/* ---- Public Function Prototypes --------------------------------------- */
/* Clear one or more IRQ interrupts. */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+static inline void intcHw_irq_disable(void __iomem *basep, uint32_t mask)
{
- __REG32(basep + INTCHW_INTENCLEAR) = mask;
+ writel(mask, basep + INTCHW_INTENCLEAR);
}
/* Enables one or more IRQ interrupts. */
-static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+static inline void intcHw_irq_enable(void __iomem *basep, uint32_t mask)
{
- __REG32(basep + INTCHW_INTENABLE) = mask;
+ writel(mask, basep + INTCHW_INTENABLE);
}
#endif /* _INTCHW_REG_H */
/* ---- Include Files ---------------------------------------------------- */
#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#endif
/* ---- Public Constants and Types --------------------------------------- */
#include <mach/csp/mm_addr.h>
#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#endif
/* ---- Public Constants and Types --------------------------------------- */
#ifdef __ASSEMBLY__
#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
#else
-#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+#define MM_IO_PHYS_TO_VIRT(phys) (void __iomem *)(((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
#endif
#endif
#ifdef __ASSEMBLY__
#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
#else
-#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
- ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#define MM_IO_VIRT_TO_PHYS(virt) (((unsigned long)(virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+ ((((unsigned long)(virt) & 0x0F000000) << 4) | ((unsigned long)(virt) & 0xFFFFFF)))
#endif
#endif
--- /dev/null
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file reg.h
+*
+* @brief Generic register definitions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x) (*((volatile uint32_t __iomem *)(x)))
+#define __REG16(x) (*((volatile uint16_t __iomem *)(x)))
+#define __REG8(x) (*((volatile uint8_t __iomem *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/* typedef struct */
+/* { */
+/* uint32_t reg1; offset 0x00 */
+/* uint32_t reg2; offset 0x04 */
+/* uint32_t reg3; offset 0x08 */
+/* uint32_t reg4; offset 0x0c */
+/* REG32_RSVD(0x10, 0x20); */
+/* uint32_t reg5; offset 0x20 */
+/* ... */
+/* } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */
+/* flags variable to be declared locally. */
+/* e.g. */
+/* statement1; */
+/* { */
+/* REG_LOCAL_IRQ_SAVE; */
+/* <multiple statements here> */
+/* REG_LOCAL_IRQ_RESTORE; */
+/* } */
+/* statement2; */
+/* */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \
+ unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t __iomem *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ __raw_writel(__raw_readl(reg) & value, reg);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t __iomem *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ __raw_writel(__raw_readl(reg) | value, reg);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t __iomem *reg, uint32_t mask,
+ uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ __raw_writel((__raw_readl(reg) & mask) | value, reg);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t __iomem *reg, uint32_t value)
+{
+ __raw_writel(value, reg);
+}
+
+#endif /* CSP_REG_H */
/****************************************************************************/
static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
) {
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
if (mask & 0x0000FFFF) {
regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
/****************************************************************************/
static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
) {
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
if (mask & 0x0000FFFF) {
- regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ writel(mask & 0x0000FFFF, ®p->reg[secHw_IDX_LS].setUnsecure);
}
if (mask & 0xFFFF0000) {
- regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ writel(mask >> 16, ®p->reg[secHw_IDX_MS].setUnsecure);
}
}
/****************************************************************************/
static inline uint32_t secHw_getStatus(void)
{
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
return (regp->reg[1].status << 16) + regp->reg[0].status;
}
--- /dev/null
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.h
+*
+* @brief API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <linux/types.h>
+
+typedef uint32_t tmrHw_ID_t; /* Timer ID */
+typedef uint32_t tmrHw_COUNT_t; /* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */
+typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */
+
+typedef enum {
+ tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */
+ tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
+ tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in millisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in millisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
#include <linux/kernel.h>
#include <linux/semaphore.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/timer.h>
/* ---- Constants and Types ---------------------------------------------- */
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include <mach/csp/mm_io.h>
/* Hardware addresses of major areas.
#define __ASM_ARCH_REG_NAND_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/reg_umi.h>
/* ---- Constants and Types ---------------------------------------------- */
#define __ASM_ARCH_REG_UMI_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/csp/mm_io.h>
/* ---- Constants and Types ---------------------------------------------- */
#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018
/* location within a page (512 byte) */
#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0
-#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
+#define REG_UMI_BCH_ERR_LOC_ADDR(index) (readl(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
#endif
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
-#define IO_DESC(va, sz) { .virtual = va, \
+#define IO_DESC(va, sz) { .virtual = (unsigned long)va, \
.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
.length = sz, \
.type = MT_DEVICE }
-#define MEM_DESC(va, sz) { .virtual = va, \
+#define MEM_DESC(va, sz) { .virtual = (unsigned long)va, \
.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
.length = sz, \
.type = MT_MEMORY }
#include <linux/types.h>
#include <linux/module.h>
-#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw.h>
#include <mach/timer.h>
/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
#include <linux/module.h>
#include <linux/time.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
/* Timing value configuration */
#include <mach/cp_intc.h>
#include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <mach/mux.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <media/tvp514x.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include <mach/common.h>
#include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include "clock.h"
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#define MITYOMAPL138_PHY_ID ""
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <asm/mach/flash.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <linux/spi/spi.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <mach/hardware.h>
#include <media/davinci/vpfe_capture.h>
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
#include "davinci.h"
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
+++ /dev/null
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET 0x00
-#define AWCCR_OFFSET 0x04
-#define A1CR_OFFSET 0x10
-
-#define ACR_ASIZE_MASK 0x3
-#define ACR_EW_MASK BIT(30)
-#define ACR_SS_MASK BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
- u8 wsetup;
- u8 wstrobe;
- u8 whold;
-
- u8 rsetup;
- u8 rstrobe;
- u8 rhold;
-
- u8 ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs);
-#endif
#include <mach/serial.h>
#include <mach/edma.h>
-#include <mach/i2c.h>
#include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
+++ /dev/null
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
- unsigned int bus_freq; /* standard bus frequency (kHz) */
- unsigned int bus_delay; /* post-transaction delay (usec) */
- unsigned int sda_pin; /* GPIO pin ID to use for SDA */
- unsigned int scl_pin; /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
+++ /dev/null
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
- DAVINCI_KEYSCAN_MATRIX_4X4,
- DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
- int (*device_enable)(struct device *dev);
- unsigned short *keymap;
- u32 keymapsize;
- u8 rep:1;
- u8 strobe;
- u8 interval;
- u8 matrix_type;
-};
-
-#endif
-
+++ /dev/null
-/*
- * Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
- /* get_cd()/get_wp() may sleep */
- int (*get_cd)(int module);
- int (*get_ro)(int module);
-
- void (*set_power)(int module, bool on);
-
- /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
- u8 wires;
-
- u32 max_freq;
-
- /* any additional host capabilities: OR'd in to mmc->f_caps */
- u32 caps;
-
- /* Version of the MMC/SD controller */
- u8 version;
-
- /* Number of sg segments */
- u8 nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
- MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
- MMC_CTLR_VERSION_2, /* DA830 */
-};
-
-#endif
+++ /dev/null
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- * Sander Huijsen <Shuijsen@optelecom-nkf.com>
- * Troy Kisky <troy.kisky@boundarydevices.com>
- * Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET 0x60
-#define NANDFSR_OFFSET 0x64
-#define NANDF1ECC_OFFSET 0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc
-#define NAND_4BIT_ECC1_OFFSET 0xc0
-#define NAND_4BIT_ECC2_OFFSET 0xc4
-#define NAND_4BIT_ECC3_OFFSET 0xc8
-#define NAND_4BIT_ECC4_OFFSET 0xcc
-#define NAND_ERR_ADD1_OFFSET 0xd0
-#define NAND_ERR_ADD2_OFFSET 0xd4
-#define NAND_ERR_ERRVAL1_OFFSET 0xd8
-#define NAND_ERR_ERRVAL2_OFFSET 0xdc
-
-/* NOTE: boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define MASK_ALE 0x08
-#define MASK_CLE 0x10
-
-struct davinci_nand_pdata { /* platform_data */
- uint32_t mask_ale;
- uint32_t mask_cle;
-
- /* for packages using two chipselects */
- uint32_t mask_chipsel;
-
- /* board's default static partition info */
- struct mtd_partition *parts;
- unsigned nr_parts;
-
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
- *
- * All DaVinci-family chips support 1-bit hardware ECC.
- * Newer ones also support 4-bit ECC, but are awkward
- * using it with large page chips.
- */
- nand_ecc_modes_t ecc_mode;
- u8 ecc_bits;
-
- /* e.g. NAND_BUSWIDTH_16 */
- unsigned options;
- /* e.g. NAND_BBT_USE_FLASH */
- unsigned bbt_options;
-
- /* Main and mirror bbt descriptor overrides */
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
-
- /* Access timings */
- struct davinci_aemif_timing *timing;
-};
-
-#endif /* __ARCH_ARM_DAVINCI_NAND_H */
+++ /dev/null
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS 0xFF
-
-enum {
- SPI_VERSION_1, /* For DM355/DM365/DM6467 */
- SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version: version of the SPI IP. Different DaVinci devices have slightly
- * varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
- * controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
- * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- * to populate if all chip-selects are internal.
- * @cshold_bug: set this to true if the SPI controller on your chip requires
- * a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- * device on the bus.
- */
-struct davinci_spi_platform_data {
- u8 version;
- u8 num_chipselect;
- u8 intr_line;
- u8 *chip_sel;
- bool cshold_bug;
- enum dma_event_q dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay: amount of delay between transmissions. Measured in number of
- * SPI module clocks.
- * @odd_parity: polarity of parity flag at the end of transmit data stream.
- * 0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- * data stream.
- * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
- * in number of SPI clocks.
- * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
- * number of SPI clocks.
- */
-struct davinci_spi_config {
- u8 wdelay;
- u8 odd_parity;
- u8 parity_enable;
-#define SPI_IO_TYPE_INTR 0
-#define SPI_IO_TYPE_POLL 1
-#define SPI_IO_TYPE_DMA 2
- u8 io_type;
- u8 timer_disable;
- u8 c2tdelay;
- u8 t2cdelay;
- u8 t2edelay;
- u8 c2edelay;
-};
-
-#endif /* __ARCH_ARM_DAVINCI_SPI_H */
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/ti_ssp.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/serial.h>
struct tnetv107x_device_info {
+++ /dev/null
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD (1 << 17)
-#define CFGCHIP2_VBUSSENSE (1 << 16)
-#define CFGCHIP2_RESET (1 << 15)
-#define CFGCHIP2_OTGMODE (3 << 13)
-#define CFGCHIP2_NO_OVERRIDE (0 << 13)
-#define CFGCHIP2_FORCE_HOST (1 << 13)
-#define CFGCHIP2_FORCE_DEVICE (2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
-#define CFGCHIP2_PHYPWRDN (1 << 10)
-#define CFGCHIP2_OTGPWRDN (1 << 9)
-#define CFGCHIP2_DATPOL (1 << 8)
-#define CFGCHIP2_USB1SUSPENDM (1 << 7)
-#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
-#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
-#define CFGCHIP2_REFFREQ (0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
-
-struct da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
- unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct da8xx_ohci_root_hub {
- /* Switch the port power on/off */
- int (*set_power)(unsigned port, int on);
- /* Read the port power status */
- int (*get_power)(unsigned port);
- /* Read the port over-current indicator */
- int (*get_oci)(unsigned port);
- /* Over-current indicator change notification (pass NULL to disable) */
- int (*ocic_notify)(da8xx_ocic_handler_t handler);
-
- /* Time from power on to power good (in 2 ms units) */
- u8 potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif /* ifndef __ASM_ARCH_USB_H */
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
-#include <plat/irq.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = DOVE_PCIE0_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
- .length = DOVE_PCIE0_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = DOVE_PCIE1_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
- .length = DOVE_PCIE1_IO_SIZE,
- .type = MT_DEVICE,
},
};
(dove_tclk + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init();
+ tauros2_init(0);
#endif
dove_setup_cpu_mbus();
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
-#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
-#define DOVE_PCIE0_IO_SIZE SZ_1M
+#define DOVE_PCIE0_IO_SIZE SZ_64K
#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
-#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
-#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
-#define DOVE_PCIE1_IO_SIZE SZ_1M
+#define DOVE_PCIE1_IO_BUS_BASE 0x00010000
+#define DOVE_PCIE1_IO_SIZE SZ_64K
/*
* Dove Core Registers Map
+++ /dev/null
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
+++ /dev/null
-/*
- * arch/arm/mach-dove/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "dove.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
- DOVE_PCIE0_IO_VIRT_BASE))
-
-#endif
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/dove.h>
+#include <plat/orion-gpio.h>
#include "mpp.h"
struct dove_mpp_grp {
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
- char io_space_name[16];
char mem_space_name[16];
- struct resource res[2];
+ struct resource res;
};
static struct pcie_port pcie_port[2];
orion_pcie_setup(pp->base);
- /*
- * IORESOURCE_IO
- */
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d I/O", pp->index);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- if (pp->index == 0) {
- pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
- pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
- } else {
- pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
- pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
- }
- pp->res[0].flags = IORESOURCE_IO;
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+ if (pp->index == 0)
+ pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
+ else
+ pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
/*
* IORESOURCE_MEM
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
+ pp->res.name = pp->mem_space_name;
if (pp->index == 0) {
- pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+ pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1;
} else {
- pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+ pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1;
}
- pp->res[1].flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pp->res[1]))
+ pp->res.flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
return 1;
}
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
- memset(pp->res, 0, sizeof(pp->res));
+ memset(&pp->res, 0, sizeof(pp->res));
} else {
printk(KERN_INFO "link down, ignoring\n");
}
* sparse external-decode ISAIO space
*/
{ /* IRQ_STAT/IRQ_MCLR */
- .virtual = IRQ_STAT,
+ .virtual = (unsigned long)IRQ_STAT,
.pfn = __phys_to_pfn(TRICK4_PHYS),
.length = TRICK4_SIZE,
.type = MT_DEVICE
}, { /* IRQ_MASK/IRQ_MSET */
- .virtual = IRQ_MASK,
+ .virtual = (unsigned long)IRQ_MASK,
.pfn = __phys_to_pfn(TRICK3_PHYS),
.length = TRICK3_SIZE,
.type = MT_DEVICE
}, { /* SOFT_BASE */
- .virtual = SOFT_BASE,
+ .virtual = (unsigned long)SOFT_BASE,
.pfn = __phys_to_pfn(TRICK1_PHYS),
.length = TRICK1_SIZE,
.type = MT_DEVICE
}, { /* PIT_BASE */
- .virtual = PIT_BASE,
+ .virtual = (unsigned long)PIT_BASE,
.pfn = __phys_to_pfn(TRICK0_PHYS),
.length = TRICK0_SIZE,
.type = MT_DEVICE
#define TRICK7_PHYS 0xf3c00000
/* Virtual addresses */
-#define PIT_BASE 0xfc000000 /* trick 0 */
-#define SOFT_BASE 0xfd000000 /* trick 1 */
-#define IRQ_MASK 0xfe000000 /* trick 3 - read */
-#define IRQ_MSET 0xfe000000 /* trick 3 - write */
-#define IRQ_STAT 0xff000000 /* trick 4 - read */
-#define IRQ_MCLR 0xff000000 /* trick 4 - write */
+#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
+#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
+#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
+#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
+#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
+#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
#endif
#include <linux/export.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include "soc.h"
#include <sound/cs4271.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
+++ /dev/null
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1 0
-#define EP93XX_DMA_I2S2 1
-#define EP93XX_DMA_AAC1 2
-#define EP93XX_DMA_AAC2 3
-#define EP93XX_DMA_AAC3 4
-#define EP93XX_DMA_I2S3 5
-#define EP93XX_DMA_UART1 6
-#define EP93XX_DMA_UART2 7
-#define EP93XX_DMA_UART3 8
-#define EP93XX_DMA_IRDA 9
-/* M2M channels */
-#define EP93XX_DMA_SSP 10
-#define EP93XX_DMA_IDE 11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels. For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
- int port;
- enum dma_transfer_direction direction;
- const char *name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
- const char *name;
- void __iomem *base;
- int irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
- struct ep93xx_dma_chan_data *channels;
- size_t num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
- if (!ep93xx_dma_chan_is_m2p(chan))
- return DMA_NONE;
-
- /* even channels are for TX, odd for RX */
- return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
-#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */
-#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data: pointer to &matrix_keymap_data
- * @debounce: debounce start count; terminal count is 0xff
- * @prescale: row/column counter pre-scaler load value
- * @flags: see above
- */
-struct ep93xx_keypad_platform_data {
- struct matrix_keymap_data *keymap_data;
- unsigned int debounce;
- unsigned int prescale;
- unsigned int flags;
-};
-
-#define EP93XX_MATRIX_ROWS (8)
-#define EP93XX_MATRIX_COLS (8)
-
-#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
+++ /dev/null
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- * at least one
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
- int num_chipselect;
- bool use_dma;
-};
-
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
- int (*setup)(struct spi_device *spi);
- void (*cleanup)(struct spi_device *spi);
- void (*cs_control)(struct spi_device *spi, int value);
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
-
-struct platform_device;
-struct fb_videomode;
-struct fb_info;
-
-#define EP93XXFB_USE_MODEDB 0
-
-/* VideoAttributes flags */
-#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0)
-#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1)
-#define EP93XXFB_VSYNC_ENABLE (1 << 2)
-#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3)
-#define EP93XXFB_COMPOSITE_SYNC (1 << 4)
-#define EP93XXFB_SYNC_VERT_HIGH (1 << 5)
-#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6)
-#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7)
-#define EP93XXFB_PCLK_FALLING (1 << 8)
-#define EP93XXFB_ENABLE_AC (1 << 9)
-#define EP93XXFB_ENABLE_LCD (1 << 10)
-#define EP93XXFB_ENABLE_CCIR (1 << 12)
-#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
-#define EP93XXFB_ENABLE_INTERRUPT (1 << 14)
-#define EP93XXFB_USB_INTERLACE (1 << 16)
-#define EP93XXFB_USE_EQUALIZATION (1 << 17)
-#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18)
-#define EP93XXFB_USE_DOUBLE_VERT (1 << 19)
-#define EP93XXFB_USE_BLANK_PIXEL (1 << 20)
-#define EP93XXFB_USE_SDCSN0 (0 << 21)
-#define EP93XXFB_USE_SDCSN1 (1 << 21)
-#define EP93XXFB_USE_SDCSN2 (2 << 21)
-#define EP93XXFB_USE_SDCSN3 (3 << 21)
-
-#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \
- EP93XXFB_PIXEL_CLOCK_ENABLE | \
- EP93XXFB_VSYNC_ENABLE | \
- EP93XXFB_PIXEL_DATA_ENABLE)
-
-struct ep93xxfb_mach_info {
- unsigned int num_modes;
- const struct fb_videomode *modes;
- const struct fb_videomode *default_mode;
- int bpp;
- unsigned int flags;
-
- int (*setup)(struct platform_device *pdev);
- void (*teardown)(struct platform_device *pdev);
- void (*blank)(int blank_mode, struct fb_info *info);
-};
-
-#endif /* __ASM_ARCH_EP93XXFB_H */
+++ /dev/null
-/* empty */
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <linux/mtd/nand.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
}
-static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
-}
-
static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
.name = "usbotg",
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 7),
- }, {
- .name = "gps",
- .enable = exynos5_clk_ip_gps_ctrl,
- .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
}, {
.name = "nfcon",
.enable = exynos5_clk_ip_fsys_ctrl,
extern struct sys_timer exynos4_timer;
+struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
void exynos5_init_irq(void);
#define exynos4212_register_clocks()
#endif
+extern struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_die(unsigned int cpu);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>
#include <mach/regs-pmu.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
-#define EXYNOS5_PA_SYSMMU_GPS 0x12630000
#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
+ .smp = smp_ops(exynos_smp_ops),
.map_io = exynos5250_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos5250_dt_machine_init,
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-fb.h>
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
#include <plat/cpu.h>
+#include "common.h"
+
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM5 : S5P_VA_SYSRAM)
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init exynos_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
if (!soc_is_exynos5250())
scu_enable(scu_base_addr());
__raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
}
+
+struct smp_operations exynos_smp_ops __initdata = {
+ .smp_init_cpus = exynos_smp_init_cpus,
+ .smp_prepare_cpus = exynos_smp_prepare_cpus,
+ .smp_secondary_init = exynos_secondary_init,
+ .smp_boot_secondary = exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = exynos_cpu_die,
+#endif
+};
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c3_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c4_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c5_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c6_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c7_cfg_gpio(struct platform_device *dev)
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
-
+
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "common.h"
.pfn = __phys_to_pfn(DC21285_PCI_IACK),
.length = PCIIACK_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = PCIO_BASE,
- .pfn = __phys_to_pfn(DC21285_PCI_IO),
- .length = PCIO_SIZE,
- .type = MT_DEVICE,
},
#endif
};
* Now, work out what we've got to map in addition on this
* platform.
*/
- if (footbridge_cfn_mode())
+ if (footbridge_cfn_mode()) {
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+ pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
+ }
}
void footbridge_restart(char mode, const char *cmd)
sys->mem_offset = DC21285_PCI_MEM;
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
+ pci_ioremap_io(0, DC21285_PCI_IO);
+
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
if (mem_mask >= mem_size)
- break;
+ break;
/*
* These registers need to be set up whether we're the
"PCI data parity", NULL);
if (cfn_mode) {
- static struct resource csrio;
-
- csrio.flags = IORESOURCE_IO;
- csrio.name = "Footbridge";
-
- allocate_resource(&ioport_resource, &csrio, 128,
- 0xff00, 0xffff, 128, NULL, NULL);
-
/*
* Map our SDRAM at a known address in PCI space, just in case
* the firmware had other ideas. Using a nonzero base is
* in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
*/
*CSR_PCICSRBASE = 0xf4000000;
- *CSR_PCICSRIOBASE = csrio.start;
+ *CSR_PCICSRIOBASE = 0;
*CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET);
*CSR_PCIROMBASE = 0;
*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
/* For NetWinder debugging */
.macro addruart, rp, rv, tmp
mov \rp, #0x000003f8
- orr \rv, \rp, #0xff000000 @ virtual
+ orr \rv, \rp, #0xfe000000 @ virtual
+ orr \rv, \rv, #0x00e00000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
.endm
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b) (a)
-#else
-#define MMU_IO(a, b) (b)
-#endif
-
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
-
/*
- * Translation of various region addresses to virtual addresses
+ * Translation of various i/o addresses to host addresses for !CONFIG_MMU
*/
+#define PCIO_BASE 0x7c000000
#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
#endif
--- /dev/null
+config ARCH_HIGHBANK
+ bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
static inline void highbank_lluart_map_io(void) {}
#endif
+#ifdef CONFIG_PM_SLEEP
+extern void highbank_pm_init(void);
+#else
+static inline void highbank_pm_init(void) {}
+#endif
+
extern void highbank_smc1(int fn, int arg);
+extern void highbank_cpu_die(unsigned int cpu);
+
+extern struct smp_operations highbank_smp_ops;
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
+ highbank_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
};
DT_MACHINE_START(HIGHBANK, "Highbank")
+ .smp = smp_ops(highbank_smp_ops),
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
extern void secondary_startup(void);
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * CPU0 should not be shut down via hotplug. cpu_idle can WFI
- * or a proper shutdown or hibernate should be used.
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/*
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro addruart,rp,rv,tmp
- movw \rv, #0x6000
- movt \rv, #0xfee3
- movw \rp, #0x6000
- movt \rp, #0xfff3
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
+++ /dev/null
-/* empty */
+++ /dev/null
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
+++ /dev/null
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
extern void secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit highbank_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
+
+struct smp_operations highbank_smp_ops __initdata = {
+ .smp_init_cpus = highbank_smp_init_cpus,
+ .smp_prepare_cpus = highbank_smp_prepare_cpus,
+ .smp_secondary_init = highbank_secondary_init,
+ .smp_boot_secondary = highbank_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = highbank_cpu_die,
+#endif
+};
.valid = suspend_valid_only_mem,
};
-static int __init highbank_pm_init(void)
+void __init highbank_pm_init(void)
{
suspend_set_ops(&highbank_pm_ops);
- return 0;
}
-module_init(highbank_pm_init);
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
-
-config SOC_IMX53
- bool
- select SOC_IMX5
- select ARCH_MX5
- select ARCH_MX53
- select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX51
if ARCH_IMX_V4_V5
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
- select USE_OF
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
endchoice
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
+comment "Device tree only"
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
+config SOC_IMX53
+ bool "i.MX53 support"
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
+ select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX53
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+ This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
bool "i.MX6 Quad support"
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o clk-busy.o
+ clk-pfd.o clk-busy.o clk.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
- imx53-qsb.dtb imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/clkdev.h>
#include <linux/err.h>
#include <mach/hardware.h>
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
- wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
- clk_max
+ wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
+ gpu2d_gate, clk_max
};
static struct clk *clk[clk_max];
clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+ clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
+
clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
- clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0);
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0);
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
/* i.mx35 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
static const char *emi_slow_sel[] = { "main_bus", "ahb", };
static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
enum imx5_clks {
dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
+ can_sel, can1_serial_gate, can1_ipg_gate,
clk_max
};
clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
- clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
- clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
+ mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
+ clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
+ clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+ clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
+ clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
for (i = 0; i < ARRAY_SIZE(clk); i++)
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+ clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can");
+ clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can");
+ clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can");
+ clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can");
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[esdhc_a_podf], 200000000);
};
static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, rom,
pr_err("i.MX6q clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
- clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
- clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
- clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
- clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
- clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
- clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
- clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
- clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
- clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
- clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
- clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
- clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
- clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
- clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
- clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
- clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
- clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
- clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
- clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
- clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
- clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
- clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
- clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
+ /*
+ * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+ * We can not get the 100MHz from the pll2_pfd0_352m.
+ * So choose pll2_pfd2_396m as enfc_sel's parent.
+ */
+ clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
#include <linux/err.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
+
#include "clk.h"
/**
unsigned long parent_rate)
{
struct clk_pllv1 *pll = to_clk_pllv1(hw);
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+ u32 reg;
+ unsigned long rate;
+
+ reg = readl(pll->base);
+
+ /*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can be found on i.MX1,
+ * i.MX21, i.MX27 and i,MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+
+ mfi = (reg >> 10) & 0xf;
+ mfn = reg & 0x3ff;
+ mfd = (reg >> 16) & 0x3ff;
+ pd = (reg >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+ /*
+ * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number
+ */
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ mfn_abs = 0x400 - mfn;
+
+ rate = parent_rate * 2;
+ rate /= pd + 1;
+
+ ll = (unsigned long long)rate * mfn_abs;
+
+ do_div(ll, mfd + 1);
+
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ ll = -ll;
+
+ ll = (rate * mfi) + ll;
- return mxc_decode_pll(readl(pll->base), parent_rate);
+ return ll;
}
struct clk_ops clk_pllv1_ops = {
--- /dev/null
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(imx_ccm_lock);
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
-#include <mach/clock.h>
+
+extern spinlock_t imx_ccm_lock;
struct clk *imx_clk_pllv1(const char *name, const char *parent,
void __iomem *base);
+++ /dev/null
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata) \
- imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
- imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
+++ /dev/null
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#include <asm/cp15.h>
#include <mach/common.h>
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
while (1)
;
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
{ /* sentinel */ }
};
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
- { /* sentinel */ }
-};
-
static void __init imx51_dt_init(void)
{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx51_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
of_platform_populate(NULL, of_default_bus_match_table,
imx51_auxdata_lookup, NULL);
}
};
static const char *imx51_dt_board_compat[] __initdata = {
- "fsl,imx51-babbage",
"fsl,imx51",
NULL
};
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
- OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
- OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
- { /* sentinel */ }
-};
-
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
- { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
- { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
- { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
- { /* sentinel */ }
-};
-
-static void __init imx53_qsb_init(void)
-{
- struct clk *clk;
-
- clk = clk_get_sys(NULL, "ssi_ext1");
- if (IS_ERR(clk)) {
- pr_err("failed to get clk ssi_ext1\n");
- return;
- }
-
- clk_register_clkdev(clk, NULL, "0-000a");
-}
-
-static void __init imx53_dt_init(void)
-{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx53_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
- if (of_machine_is_compatible("fsl,imx53-qsb"))
- imx53_qsb_init();
-
- of_platform_populate(NULL, of_default_bus_match_table,
- imx53_auxdata_lookup, NULL);
-}
-
-static void __init imx53_timer_init(void)
-{
- mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
- .init = imx53_timer_init,
-};
-
-static const char *imx53_dt_board_compat[] __initdata = {
- "fsl,imx53-ard",
- "fsl,imx53-evk",
- "fsl,imx53-qsb",
- "fsl,imx53-smd",
- "fsl,imx53",
- NULL
-};
-
-DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &imx53_timer,
- .init_machine = imx53_dt_init,
- .init_late = imx53_init_late,
- .dt_compat = imx53_dt_board_compat,
- .restart = mxc_restart,
-MACHINE_END
--- /dev/null
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx53_qsb_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys(NULL, "ssi_ext1");
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clk ssi_ext1\n");
+ return;
+ }
+
+ clk_register_clkdev(clk, NULL, "0-000a");
+}
+
+static void __init imx53_dt_init(void)
+{
+ if (of_machine_is_compatible("fsl,imx53-qsb"))
+ imx53_qsb_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .init_late = imx53_init_late,
+ .dt_compat = imx53_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/anatop.h>
clk_set_parent(cko1_sel, ahb);
rate = clk_round_rate(cko1, 16000000);
clk_set_rate(cko1, rate);
- clk_register_clkdev(cko1, NULL, "0-000a");
put_clk:
if (!IS_ERR(cko1_sel))
clk_put(cko1_sel);
static void __init imx6q_init_machine(void)
{
- /*
- * This should be removed when all imx6q boards have pinctrl
- * states for devices defined in device tree.
- */
- pinctrl_provide_dummies();
-
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
imx6q_sabrelite_init();
};
static const char *imx6q_dt_compat[] __initdata = {
- "fsl,imx6q-arm2",
- "fsl,imx6q-sabrelite",
- "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
- .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
- .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = CS4_CS8900_MMIO_START,
.type = MT_DEVICE
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include "devices-imx31.h"
+++ /dev/null
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
- /* board id */
- MX51_PAD_PCBID0,
- MX51_PAD_PCBID1,
- MX51_PAD_PCBID2,
-
- /* leds */
- MX51_PAD_CSI1_D9__GPIO3_13,
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
- MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
- /* power key */
- MX51_PAD_PWRKEY,
-
- /* reset */
- MX51_PAD_DI1_PIN13__GPIO3_2,
- MX51_PAD_GPIO1_4__GPIO1_4,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/* PCBID2 PCBID1 PCBID0 STATE
- 1 1 1 ER1:rev1.1
- 1 1 0 ER2:rev1.2
- 1 0 1 ER3:rev1.3
- 1 0 0 ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
- int id;
-
- /* things are taking time to settle */
- msleep(150);
-
- gpio_request(EFIKAMX_PCBID0, "pcbid0");
- gpio_direction_input(EFIKAMX_PCBID0);
- gpio_request(EFIKAMX_PCBID1, "pcbid1");
- gpio_direction_input(EFIKAMX_PCBID1);
- gpio_request(EFIKAMX_PCBID2, "pcbid2");
- gpio_direction_input(EFIKAMX_PCBID2);
-
- id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
- id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
- switch (id) {
- case 7:
- system_rev = 0x11;
- break;
- case 6:
- system_rev = 0x12;
- break;
- case 5:
- system_rev = 0x13;
- break;
- case 4:
- system_rev = 0x14;
- break;
- default:
- system_rev = 0x10;
- break;
- }
-
- if ((system_rev == 0x10)
- || (system_rev == 0x12)
- || (system_rev == 0x14)) {
- printk(KERN_WARNING
- "EfikaMX: Unsupported board revision 1.%u!\n",
- system_rev & 0xf);
- }
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
- {
- .name = "efikamx:green",
- .default_trigger = "default-on",
- .gpio = EFIKAMX_GREEN_LED,
- },
- {
- .name = "efikamx:red",
- .default_trigger = "ide-disk",
- .gpio = EFIKAMX_RED_LED,
- },
- {
- .name = "efikamx:blue",
- .default_trigger = "mmc0",
- .gpio = EFIKAMX_BLUE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikamx_leds_data __initconst = {
- .leds = mx51_efikamx_leds,
- .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKAMX_POWER_KEY,
- .type = EV_PWR,
- .desc = "Power Button (CM)",
- .wakeup = 1,
- .debounce_interval = 10, /* ms */
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
- .buttons = mx51_efikamx_powerkey,
- .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
- if (system_rev == 0x11)
- gpio_direction_output(EFIKAMX_RESET1_1, 0);
- else
- gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
- if (!IS_ERR(coincell))
- regulator_disable(coincell);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKAMX_POWEROFF, "poweroff");
- pm_power_off = mx51_efikamx_power_off;
-
- /* enable coincell charger. maybe need a small power driver ? */
- coincell = regulator_get(NULL, "coincell");
- if (!IS_ERR(coincell)) {
- regulator_set_voltage(coincell, 3000000, 3000000);
- regulator_enable(coincell);
- }
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikamx_init_late(void)
-{
- imx51_init_late();
- mx51_efikamx_power_init();
-}
-
-static void __init mx51_efikamx_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
- ARRAY_SIZE(mx51efikamx_pads));
- efika_board_common_init();
-
- mx51_efikamx_board_id();
-
- /* on < 1.2 boards both SD controllers are used */
- if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
- mx51_efikamx_leds[2].default_trigger = "mmc1";
- } else
- imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
- gpio_led_register_device(-1, &mx51_efikamx_leds_data);
- imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
- if (system_rev == 0x11) {
- gpio_request(EFIKAMX_RESET1_1, "reset");
- gpio_direction_output(EFIKAMX_RESET1_1, 1);
- } else {
- gpio_request(EFIKAMX_RESET, "reset");
- gpio_direction_output(EFIKAMX_RESET, 1);
- }
-
- /*
- * enable wifi by default only on mx
- * sb and mx have same wlan pin but the value to enable it are
- * different :/
- */
- gpio_request(EFIKA_WLAN_EN, "wlan_en");
- gpio_direction_output(EFIKA_WLAN_EN, 0);
- msleep(10);
-
- gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
- gpio_direction_output(EFIKA_WLAN_RESET, 0);
- msleep(10);
- gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
- .init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_efikamx_timer,
- .init_machine = mx51_efikamx_init,
- .init_late = mx51_efikamx_init_late,
- .restart = mx51_efikamx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
- /* USB HOST2 */
- MX51_PAD_EIM_D16__USBH2_DATA0,
- MX51_PAD_EIM_D17__USBH2_DATA1,
- MX51_PAD_EIM_D18__USBH2_DATA2,
- MX51_PAD_EIM_D19__USBH2_DATA3,
- MX51_PAD_EIM_D20__USBH2_DATA4,
- MX51_PAD_EIM_D21__USBH2_DATA5,
- MX51_PAD_EIM_D22__USBH2_DATA6,
- MX51_PAD_EIM_D23__USBH2_DATA7,
- MX51_PAD_EIM_A24__USBH2_CLK,
- MX51_PAD_EIM_A25__USBH2_DIR,
- MX51_PAD_EIM_A26__USBH2_STP,
- MX51_PAD_EIM_A27__USBH2_NXT,
-
- /* leds */
- MX51_PAD_EIM_CS0__GPIO2_25,
- MX51_PAD_GPIO1_3__GPIO1_3,
-
- /* pcb id */
- MX51_PAD_EIM_CS3__GPIO2_28,
- MX51_PAD_EIM_CS4__GPIO2_29,
-
- /* lid */
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
- /* power key*/
- MX51_PAD_PWRKEY,
-
- /* wifi/bt button */
- MX51_PAD_DI1_PIN12__GPIO3_1,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
- /* wdog reset */
- MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
- /* BT */
- MX51_PAD_EIM_A17__GPIO2_11,
-
- MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
- iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
- mxc_iomux_v3_setup_pad(usbh2gpio);
- gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
- gpio_direction_output(EFIKASB_USBH2_STP, 0);
- msleep(1);
- gpio_set_value(EFIKASB_USBH2_STP, 1);
- msleep(1);
-
- gpio_free(EFIKASB_USBH2_STP);
- mxc_iomux_v3_setup_pad(usbh2stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
- .init = initialize_usbh2_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
- usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- if (usbh2_config.otg)
- imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
- {
- .name = "efikasb:green",
- .default_trigger = "default-on",
- .gpio = EFIKASB_GREEN_LED,
- .active_low = 1,
- },
- {
- .name = "efikasb:white",
- .default_trigger = "caps",
- .gpio = EFIKASB_WHITE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikasb_leds_data __initconst = {
- .leds = mx51_efikasb_leds,
- .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKASB_PWRKEY,
- .type = EV_KEY,
- .desc = "Power Button",
- .wakeup = 1,
- .active_low = 1,
- },
- {
- .code = SW_LID,
- .gpio = EFIKASB_LID,
- .type = EV_SW,
- .desc = "Lid Switch",
- .active_low = 1,
- },
- {
- .code = KEY_RFKILL,
- .gpio = EFIKASB_RFKILL,
- .type = EV_KEY,
- .desc = "rfkill",
- .active_low = 1,
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
- .buttons = mx51_efikasb_keys,
- .nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
- .cd_gpio = EFIKASB_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
- gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKASB_POWEROFF, "poweroff");
- pm_power_off = mx51_efikasb_power_off;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikasb_init_late(void)
-{
- imx51_init_late();
- mx51_efikasb_power_init();
-}
-
-/* 01 R1.3 board
- 10 R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
- int id;
-
- gpio_request(EFIKASB_PCBID0, "pcb id0");
- gpio_direction_input(EFIKASB_PCBID0);
- gpio_request(EFIKASB_PCBID1, "pcb id1");
- gpio_direction_input(EFIKASB_PCBID1);
-
- id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
- switch (id) {
- default:
- break;
- case 1:
- system_rev = 0x13;
- break;
- case 2:
- system_rev = 0x20;
- break;
- }
-}
-
-static void __init efikasb_board_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
- ARRAY_SIZE(mx51efikasb_pads));
- efika_board_common_init();
-
- mx51_efikasb_board_id();
- mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
- imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
- gpio_led_register_device(-1, &mx51_efikasb_leds_data);
- imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
- .init = mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_machine = efikasb_board_init,
- .init_late = mx51_efikasb_init_late,
- .timer = &mx51_efikasb_timer,
- .restart = mxc_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
-#define ARD_HOME IMX_GPIO_NR(5, 10)
-#define ARD_BACK IMX_GPIO_NR(5, 11)
-#define ARD_PROG IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
- /* UART1 */
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
- /* WEIM for CS1 */
- MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
- MX53_PAD_EIM_D16__EMI_WEIM_D_16,
- MX53_PAD_EIM_D17__EMI_WEIM_D_17,
- MX53_PAD_EIM_D18__EMI_WEIM_D_18,
- MX53_PAD_EIM_D19__EMI_WEIM_D_19,
- MX53_PAD_EIM_D20__EMI_WEIM_D_20,
- MX53_PAD_EIM_D21__EMI_WEIM_D_21,
- MX53_PAD_EIM_D22__EMI_WEIM_D_22,
- MX53_PAD_EIM_D23__EMI_WEIM_D_23,
- MX53_PAD_EIM_D24__EMI_WEIM_D_24,
- MX53_PAD_EIM_D25__EMI_WEIM_D_25,
- MX53_PAD_EIM_D26__EMI_WEIM_D_26,
- MX53_PAD_EIM_D27__EMI_WEIM_D_27,
- MX53_PAD_EIM_D28__EMI_WEIM_D_28,
- MX53_PAD_EIM_D29__EMI_WEIM_D_29,
- MX53_PAD_EIM_D30__EMI_WEIM_D_30,
- MX53_PAD_EIM_D31__EMI_WEIM_D_31,
- MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
- MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
- MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
- MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
- MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
- MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
- MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
- MX53_PAD_EIM_OE__EMI_WEIM_OE,
- MX53_PAD_EIM_RW__EMI_WEIM_RW,
- MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
- /* SDHC1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
- MX53_PAD_GPIO_1__GPIO1_1,
- MX53_PAD_GPIO_9__GPIO1_9,
- /* I2C2 */
- MX53_PAD_EIM_EB2__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* I2C3 */
- MX53_PAD_GPIO_3__I2C3_SCL,
- MX53_PAD_GPIO_16__I2C3_SDA,
- /* GPIO */
- MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
- MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
- MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
- MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
- MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button ard_buttons[] = {
- GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
- GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
- GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
- GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
- .buttons = ard_buttons,
- .nbuttons = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
- {
- .start = MX53_CS1_64MB_BASE_ADDR,
- .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
- .resource = ard_smsc911x_resources,
- .dev = {
- .platform_data = &ard_smsc911x_config,
- },
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
- .cd_gpio = ARD_SD1_CD,
- .wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
- .bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
- .bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
- gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
- gpio_direction_input(ARD_ETHERNET_INT_B);
-
- gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
- gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
- u32 reg;
- void __iomem *weim_base, *iomuxc_base;
-
- weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
- if (!weim_base)
- return -ENOMEM;
-
- iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
- if (!iomuxc_base) {
- iounmap(weim_base);
- return -ENOMEM;
- }
-
- /* CS1 timings for LAN9220 */
- writel(0x20001, (weim_base + 0x18));
- writel(0x0, (weim_base + 0x1C));
- writel(0x16000202, (weim_base + 0x20));
- writel(0x00000002, (weim_base + 0x24));
- writel(0x16002082, (weim_base + 0x28));
- writel(0x00000000, (weim_base + 0x2C));
- writel(0x00000000, (weim_base + 0x90));
-
- /* specify 64 MB on CS1 and CS0 on GPR1 */
- reg = readl(iomuxc_base + 0x4);
- reg &= ~0x3F;
- reg |= 0x1B;
- writel(reg, (iomuxc_base + 0x4));
-
- iounmap(iomuxc_base);
- iounmap(weim_base);
-
- return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
- weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
- &ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
- imx53_soc_init();
- imx53_add_imx_uart(0, NULL);
-
- imx53_ard_common_init();
- mx53_ard_io_init();
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
- ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
- imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
- imx_add_gpio_keys(&ard_button_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
- .init = mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_ard_timer,
- .init_machine = mx53_ard_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- MX53_PAD_PATA_DIOR__UART2_RTS,
- MX53_PAD_PATA_INTRQ__UART2_CTS,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
- MX53_PAD_EIM_D16__ECSPI1_SCLK,
- MX53_PAD_EIM_D17__ECSPI1_MISO,
- MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
- /* ecspi chip select lines */
- MX53_PAD_EIM_EB2__GPIO2_30,
- MX53_PAD_EIM_D19__GPIO3_19,
- /* LED */
- MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = MX53EVK_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
- .leds = mx53evk_leds,
- .num_leds = ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
- imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
- "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx53_evk_spi_cs[] = {
- EVK_ECSPI1_CS0,
- EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
- .chipselect = mx53_evk_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
- imx53_soc_init();
- imx53_evk_common_init();
-
- mx53_evk_init_uart();
- mx53_evk_fec_reset();
- imx53_add_fec(&mx53_evk_fec_pdata);
-
- imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
- imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
-
- spi_register_board_info(mx53_evk_spi_board_info,
- ARRAY_SIZE(mx53_evk_spi_board_info));
- imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0);
- gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
- .init = mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_evk_timer,
- .init_machine = mx53_evk_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define LOCO_LED IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
- /* FEC */
- MX53_PAD_FEC_MDC__FEC_MDC,
- MX53_PAD_FEC_MDIO__FEC_MDIO,
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- MX53_PAD_FEC_TX_EN__FEC_TX_EN,
- MX53_PAD_FEC_TXD1__FEC_TDATA_1,
- MX53_PAD_FEC_TXD0__FEC_TDATA_0,
- /* FEC_nRST */
- MX53_PAD_PATA_DA_0__GPIO7_6,
- /* FEC_nINT */
- MX53_PAD_PATA_DATA4__GPIO2_4,
- /* AUDMUX5 */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
- /* I2C2 */
- MX53_PAD_KEY_COL3__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1_CD */
- MX53_PAD_EIM_DA13__GPIO3_13,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- /* SD3_CD */
- MX53_PAD_EIM_DA11__GPIO3_11,
- /* SD3_WP */
- MX53_PAD_EIM_DA12__GPIO3_12,
- /* VGA */
- MX53_PAD_EIM_OE__IPU_DI1_PIN7,
- MX53_PAD_EIM_RW__IPU_DI1_PIN8,
- /* DISPLB */
- MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
- MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
- MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
- MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
- /* DISP0_POWER_EN */
- MX53_PAD_EIM_D24__GPIO3_24,
- /* DISP0 DET INT */
- MX53_PAD_EIM_D31__GPIO3_31,
- /* LVDS */
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* UART1 */
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
- /* CSI0 */
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
- /* DISPLAY */
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
- /* Audio CLK*/
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
- /* PWM */
- MX53_PAD_GPIO_1__PWM2_PWMO,
- /* SPDIF */
- MX53_PAD_GPIO_7__SPDIF_PLOCK,
- MX53_PAD_GPIO_17__SPDIF_OUT1,
- /* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
- MX53_PAD_PATA_DA_2__GPIO7_8,
- MX53_PAD_PATA_DATA5__GPIO2_5,
- MX53_PAD_PATA_DATA6__GPIO2_6,
- MX53_PAD_PATA_DATA14__GPIO2_14,
- MX53_PAD_PATA_DATA15__GPIO2_15,
- MX53_PAD_PATA_INTRQ__GPIO7_2,
- MX53_PAD_EIM_WAIT__GPIO5_0,
- MX53_PAD_NANDF_WP_B__GPIO6_9,
- MX53_PAD_NANDF_RB0__GPIO6_10,
- MX53_PAD_NANDF_CS1__GPIO6_14,
- MX53_PAD_NANDF_CS2__GPIO6_15,
- MX53_PAD_NANDF_CS3__GPIO6_16,
- MX53_PAD_GPIO_5__GPIO1_5,
- MX53_PAD_GPIO_16__GPIO7_11,
- MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button loco_buttons[] = {
- GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
- GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
- .buttons = loco_buttons,
- .nbuttons = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
- .cd_gpio = LOCO_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
- .cd_gpio = LOCO_SD3_CD,
- .wp_gpio = LOCO_SD3_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(LOCO_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = LOCO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
- .leds = mx53loco_leds,
- .num_leds = ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
- {
- I2C_BOARD_INFO("mma8450", 0x1C),
- },
-};
-
-static void __init mx53_loco_board_init(void)
-{
- int ret;
- imx53_soc_init();
- imx53_qsb_common_init();
-
- imx53_add_imx_uart(0, NULL);
- mx53_loco_fec_reset();
- imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0);
-
- ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
- if (ret)
- pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
- i2c_register_board_info(0, mx53loco_i2c_devices,
- ARRAY_SIZE(mx53loco_i2c_devices));
- imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
- imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
- imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
- imx_add_gpio_keys(&loco_button_data);
- gpio_led_register_device(-1, &mx53loco_leds_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
- .init = mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_loco_timer,
- .init_machine = mx53_loco_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
- MX53_PAD_PATA_DA_1__UART3_CTS,
- MX53_PAD_PATA_DA_2__UART3_RTS,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD2 */
- MX53_PAD_SD2_CMD__ESDHC2_CMD,
- MX53_PAD_SD2_CLK__ESDHC2_CLK,
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, NULL);
- imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
- int ret;
-
- /* Enable SATA PWR */
- ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
- GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
- if (ret) {
- pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
- return;
- }
-}
-
-void __init imx53_smd_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
- imx53_soc_init();
- imx53_smd_common_init();
-
- mx53_smd_init_uart();
- mx53_smd_fec_reset();
- imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
- mx53_smd_ahci_pwr_on();
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
- .init = mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_smd_timer,
- .init_machine = mx53_smd_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
.script_addrs = &imx51_sdma_script,
};
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .app_2_mcu_addr = 683,
- .mcu_2_app_addr = 747,
- .uart_2_mcu_addr = 817,
- .shp_2_mcu_addr = 891,
- .mcu_2_shp_addr = 960,
- .uartsh_2_mcu_addr = 1032,
- .spdif_2_mcu_addr = 1100,
- .mcu_2_spdif_addr = 1134,
- .firi_2_mcu_addr = 1193,
- .mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
- .fw_name = "sdma-imx53.bin",
- .script_addrs = &imx53_sdma_script,
-};
-
static const struct resource imx50_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
};
DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
};
-static const struct resource imx53_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx35 type gpio */
ARRAY_SIZE(imx51_audmux_res));
}
-void __init imx53_soc_init(void)
-{
- /* i.mx53 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
- mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
- mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
- mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
- pinctrl_provide_dummies();
- /* i.mx53 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
- /* i.mx53 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
- ARRAY_SIZE(imx53_audmux_res));
-}
-
void __init imx51_init_late(void)
{
mx51_neon_fixup();
#include <linux/platform_device.h>
#include <linux/module.h>
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
/* IMX camera FIQ handler */
EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
+++ /dev/null
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-
-#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
-
- /* SD/MMC WP/CD */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
- MX51_PAD_GPIO1_7__SD2_WP,
- MX51_PAD_GPIO1_8__SD2_CD,
-
- /* spi */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
- MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB RESET */
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* WLAN */
- MX51_PAD_EIM_A22__GPIO2_16,
- MX51_PAD_EIM_A16__GPIO2_10,
-
- /* USB PHY RESET */
- MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- u32 v;
- void __iomem *usb_base;
- void __iomem *socregs_base;
-
- mxc_iomux_v3_setup_pad(usbh1gpio);
- gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
- gpio_direction_output(EFIKAMX_USBH1_STP, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USBH1_STP, 1);
- msleep(1);
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* The clock for the USBH1 ULPI port will come externally */
- /* from the PHY. */
- v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- socregs_base + MX51_USB_CTRL_1_OFFSET);
-
- iounmap(usb_base);
-
- gpio_free(EFIKAMX_USBH1_STP);
- mxc_iomux_v3_setup_pad(usbh1stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
- gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
- gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
- mx51_efika_hubreset();
-
- /* pulling it low, means no USB at all... */
- gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
- gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
- usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- if (usbh1_config.otg)
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- },
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
- .name = "spi_flash",
- .parts = mx51_efika_spi_nor_partitions,
- .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
- .type = "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "1-000a"),
- REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
- {
- .supply = "pwgt1",
- }
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
- {
- .supply = "pwgt2",
- }
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
- {
- .supply = "coincell",
- }
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 850000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .min_uV = 900000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 950000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data swbst_init = {
- .constraints = {
- .name = "SWBST",
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
- .consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .min_uV = 2400000,
- .max_uV = 2775000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .min_uV = 2775000,
- .max_uV = 2775000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
- .consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
- .constraints = {
- .name = "VAUDIO",
- .min_uV = 2300000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vsd_init = {
- .constraints = {
- .name = "VSD",
- .min_uV = 1800000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
- .consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- .min_uV = 1800000,
- .max_uV = 2900000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data gpo1_init = {
- .constraints = {
- .name = "GPO1",
- }
-};
-
-static struct regulator_init_data gpo2_init = {
- .constraints = {
- .name = "GPO2",
- }
-};
-
-static struct regulator_init_data gpo3_init = {
- .constraints = {
- .name = "GPO3",
- }
-};
-
-static struct regulator_init_data gpo4_init = {
- .constraints = {
- .name = "GPO4",
- }
-};
-
-static struct regulator_init_data pwgt1_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
- .consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
- .consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
- .constraints = {
- .name = "COINCELL",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
- .consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_SWBST, .init_data = &swbst_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VSD, .init_data = &vsd_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
- { .id = MC13892_GPO1, .init_data = &gpo1_init },
- { .id = MC13892_GPO2, .init_data = &gpo2_init },
- { .id = MC13892_GPO3, .init_data = &gpo3_init },
- { .id = MC13892_GPO4, .init_data = &gpo4_init },
- { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
- { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
- { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
- .regulators = mx51_efika_regulators,
- },
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &mx51_efika_spi_flash_data,
- .irq = -1,
- },
- {
- .modalias = "mc13892",
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &mx51_efika_mc13892_data,
- /* irq number is run-time assigned */
- },
-};
-
-static int mx51_efika_spi_cs[] = {
- EFIKAMX_SPI_CS0,
- EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
- .chipselect = mx51_efika_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
- ARRAY_SIZE(mx51efika_pads));
- imx51_add_imx_uart(0, &uart_pdata);
- mx51_efika_usb();
-
- /* FIXME: comes from original code. check this. */
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- sw2_init.constraints.state_mem.uV = 1100000;
- else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
- sw2_init.constraints.state_mem.uV = 1250000;
- sw1_init.constraints.state_mem.uV = 1000000;
- }
- if (machine_is_mx51_efikasb())
- vgen1_init.constraints.max_uV = 1200000;
-
- gpio_request(EFIKAMX_PMIC, "pmic irq");
- gpio_direction_input(EFIKAMX_PMIC);
- mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
- spi_register_board_info(mx51_efika_spi_board_info,
- ARRAY_SIZE(mx51_efika_spi_board_info));
- imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
- imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-}
scu_base = IMX_IO_ADDRESS(base);
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit imx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
imx_enable_cpu(cpu, true);
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init imx_smp_init_cpus(void)
{
int i, ncores;
scu_enable(scu_base);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
}
+
+struct smp_operations imx_smp_ops __initdata = {
+ .smp_init_cpus = imx_smp_init_cpus,
+ .smp_prepare_cpus = imx_smp_prepare_cpus,
+ .smp_secondary_init = imx_secondary_init,
+ .smp_boot_secondary = imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = imx_cpu_die,
+#endif
+};
* UART0 7 6
* UART1 5 4
*/
-#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS)
+#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS)
static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
{
static struct cpufreq_driver integrator_driver;
-#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
+#define CM_ID __io_address(INTEGRATOR_HDR_ID)
+#define CM_OSC __io_address(INTEGRATOR_HDR_OSC)
+#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
+#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
static const struct icst_params lclk_params = {
.ref = 24000000,
+++ /dev/null
-/*
- * arch/arm/mach-integrator/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
-#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
*/
#define PHYS_PCI_V3_BASE 0x62000000
+#define PCI_MEMORY_VADDR 0xe8000000
+#define PCI_CONFIG_VADDR 0xec000000
+#define PCI_V3_VADDR 0xed000000
+
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <plat/fpga-irq.h>
* e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
* ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
* ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k)
- * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
+ * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
* ef000000 Cache flush
* f1000000 10000000 Core module registers
* f1100000 11000000 System controller registers
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = PCI_MEMORY_VADDR,
+ .virtual = (unsigned long)PCI_MEMORY_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = PCI_CONFIG_VADDR,
+ .virtual = (unsigned long)PCI_CONFIG_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = PCI_V3_VADDR,
+ .virtual = (unsigned long)PCI_V3_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
.length = SZ_64K,
.type = MT_DEVICE
- }, {
- .virtual = PCI_IO_VADDR,
- .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE
}
};
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
vga_base = PCI_MEMORY_VADDR;
+ pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static unsigned long timer_reload;
#define INTCP_ETH_SIZE 0x10
-#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
+#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE)
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
*/
static unsigned int mmc_status(struct device *dev)
{
- unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
- writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
+ unsigned int status = readl(__io_address(0xca000000 + 4));
+ writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8));
return status & 8;
}
/*
* The V3 PCI interface chip in Integrator provides several windows from
* local bus memory into the PCI memory areas. Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse
+ * are not really enough windows for our usage, therefore we reuse
* one of the windows for access to PCI configuration space. The
* memory map is as follows:
- *
+ *
* Local Bus Memory Usage
- *
+ *
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
* 60000000 - 60FFFFFF PCI IO. 16M
* 61000000 - 61FFFFFF PCI Configuration. 16M
- *
+ *
* There are three V3 windows, each described by a pair of V3 registers.
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
* Base0 and Base1 can be used for any type of PCI memory access. Base2
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
* uses this only for PCI IO space.
- *
+ *
* Normally these spaces are mapped using the following base registers:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF
- *
+ *
* This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI
+ * When PCI configuration accesses are needed (via the uHAL PCI
* configuration space primitives) we must remap the spaces as follows:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
- *
+ *
* To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within
+ * The V3 chip translates an address by checking its range within
* each of the BASE/MAP pairs in turn (in ascending register number
* order). It will use the first matching pair. So, for example,
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from
+ * LB_BASE1/LB_MAP1, the V3 will use the translation from
* LB_BASE0/LB_MAP0.
- *
+ *
* To allow PCI Configuration space access, the code enlarges the
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
* be remapped for use by configuration cycles.
- *
- * At the end of the PCI Configuration space accesses,
+ *
+ * At the end of the PCI Configuration space accesses,
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
* reveal the now restored LB_BASE1/LB_MAP1 window.
- *
+ *
* NOTE: We do not set up I2O mapping. I suspect that this is only
* for an intelligent (target) device. Using I2O disables most of
* the mappings into PCI memory.
*
* returns: configuration address to play on the PCI bus
*
- * To generate the appropriate PCI configuration cycles in the PCI
- * configuration address space, you present the V3 with the following pattern
+ * To generate the appropriate PCI configuration cycles in the PCI
+ * configuration address space, you present the V3 with the following pattern
* (which is very nearly a type 1 (except that the lower two bits are 00 and
* not 01). In order for this mapping to work you need to set up one of
* the local to PCI aperatures to 16Mbytes in length translating to
*
* Type 0:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
*
* Type 1:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
- *
+ *
*/
static DEFINE_RAW_SPINLOCK(v3_lock);
#undef V3_LB_BASE_PREFETCH
#define V3_LB_BASE_PREFETCH 0
-static unsigned long v3_open_config_window(struct pci_bus *bus,
+static void __iomem *v3_open_config_window(struct pci_bus *bus,
unsigned int devfn, int offset)
{
unsigned int address, mapaddress, busnr;
static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
- unsigned long addr;
+ void __iomem *addr;
unsigned long flags;
u32 v;
static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
- unsigned long addr;
+ void __iomem *addr;
unsigned long flags;
raw_spin_lock_irqsave(&v3_lock, flags);
}
/*
- * the IO resource for this bus
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
* means I can't get additional information on the reason for the pm2fb
* problems. I suppose I'll just have to mind-meld with the machine. ;)
*/
-#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
+#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24)
static int
v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
unsigned int temp;
int ret;
- pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
/*
+++ /dev/null
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-
-#endif
* 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window
*
* IO MAP
- * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window
- * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window
+ * 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window
+ * 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window
*/
-#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL
#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL
#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\
- IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\
- IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- (IOP13XX_PCIX_LOWER_IO_PA\
- - IOP13XX_PCIX_LOWER_IO_VA))
#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
IOP13XX_PCIX_LOWER_MEM_BA)
/* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL
#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- (IOP13XX_PCIE_LOWER_IO_PA\
- - IOP13XX_PCIE_LOWER_IO_VA))
+#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */
#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
* IOP13XX chipset registers
*/
#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE 0xfee80000UL /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE (void __iomem *)(0xfee80000UL) /* PMMR phys. address */
#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000
#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\
IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\
IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (u32) ((u32) addr +\
- (IOP13XX_PMMR_PHYS_MEM_BASE\
- - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- (IOP13XX_PMMR_PHYS_MEM_BASE\
- - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (((addr) - IOP13XX_PMMR_VIRT_MEM_BASE)\
+ + IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (((addr) - IOP13XX_PMMR_PHYS_MEM_BASE)\
+ + IOP13XX_PMMR_VIRT_MEM_BASE)
#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_PMMR_SIZE 0x00080000
/*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
-#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002340)
+#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002340)
#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-static inline dma_addr_t __virt_to_lbus(unsigned long x)
+static inline dma_addr_t __virt_to_lbus(void __iomem *x)
{
return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
}
-static inline unsigned long __lbus_to_virt(dma_addr_t x)
+static inline void __iomem *__lbus_to_virt(dma_addr_t x)
{
return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
}
#define __arch_dma_to_virt(dev, addr) \
({ \
- unsigned long __virt; \
+ void * __virt; \
dma_addr_t __dma = addr; \
if (is_lbus_device(dev) && __is_lbus_dma(__dma)) \
__virt = __lbus_to_virt(__dma); \
else \
- __virt = __phys_to_virt(__dma); \
- (void *)__virt; \
+ __virt = (void *)__phys_to_virt(__dma); \
+ __virt; \
})
#define __arch_virt_to_dma(dev, addr) \
({ \
- unsigned long __virt = (unsigned long)addr; \
+ void * __virt = addr; \
dma_addr_t __dma; \
if (is_lbus_device(dev) && __is_lbus_virt(__virt)) \
__dma = __virt_to_lbus(__virt); \
else \
- __dma = __virt_to_phys(__virt); \
+ __dma = __virt_to_phys((unsigned long)__virt); \
__dma; \
})
#include "pci.h"
-void * __iomem __iop13xx_io(unsigned long io_addr)
-{
- void __iomem * io_virt;
-
- switch (io_addr) {
- case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
- io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
- break;
- case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
- io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
- break;
- default:
- BUG();
- }
-
- return io_virt;
-}
-EXPORT_SYMBOL(__iop13xx_io);
-
static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
size_t size, unsigned int mtype, void *caller)
{
if (unlikely(!iop13xx_atux_mem_base))
retval = NULL;
else
- retval = (void *)(iop13xx_atux_mem_base +
+ retval = (iop13xx_atux_mem_base +
(cookie - IOP13XX_PCIX_LOWER_MEM_RA));
break;
case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
if (unlikely(!iop13xx_atue_mem_base))
retval = NULL;
else
- retval = (void *)(iop13xx_atue_mem_base +
+ retval = (iop13xx_atue_mem_base +
(cookie - IOP13XX_PCIE_LOWER_MEM_RA));
break;
case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
(cookie - IOP13XX_PBI_LOWER_MEM_RA),
size, mtype, __builtin_return_address(0));
break;
- case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
- retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
- break;
- case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
- retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
- break;
case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
- retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
+ retval = IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
break;
default:
retval = __arm_ioremap_caller(cookie, size, mtype,
goto skip;
switch ((u32) addr) {
- case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
- case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
- case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
+ case (u32)IOP13XX_PMMR_VIRT_MEM_BASE ... (u32)IOP13XX_PMMR_UPPER_MEM_VA:
goto skip;
}
__iounmap(addr);
u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
static struct pci_bus *pci_bus_atux = 0;
static struct pci_bus *pci_bus_atue = 0;
-u32 iop13xx_atue_mem_base;
-u32 iop13xx_atux_mem_base;
+void __iomem *iop13xx_atue_mem_base;
+void __iomem *iop13xx_atux_mem_base;
size_t iop13xx_atue_mem_size;
size_t iop13xx_atux_mem_size;
}
if (end) {
- iop13xx_atux_mem_base =
- (u32) __arm_ioremap_pfn(
+ iop13xx_atux_mem_base = __arm_ioremap_pfn(
__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
, 0, iop13xx_atux_mem_size, MT_DEVICE);
if (!iop13xx_atux_mem_base) {
}
} else
iop13xx_atux_mem_size = 0;
- PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+ PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
__func__, atu, iop13xx_atux_mem_size,
iop13xx_atux_mem_base);
break;
}
if (end) {
- iop13xx_atue_mem_base =
- (u32) __arm_ioremap_pfn(
+ iop13xx_atue_mem_base = __arm_ioremap_pfn(
__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
, 0, iop13xx_atue_mem_size, MT_DEVICE);
if (!iop13xx_atue_mem_base) {
}
} else
iop13xx_atue_mem_size = 0;
- PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+ PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
__func__, atu, iop13xx_atue_mem_size,
iop13xx_atue_mem_base);
break;
}
- printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
+ printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
atu ? "ATUE" : "ATUX",
(atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
SZ_1M,
__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
/* Setup the Min Address for PCI memory... */
- pcibios_min_io = 0;
pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
/* if Linux is given control of an ATU
if (nr > 1)
return 0;
- res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
<< IOP13XX_ATUX_PCIXSR_FUNC_NUM;
__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
- res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
- res[0].end = IOP13XX_PCIX_UPPER_IO_PA;
- res[0].name = "IQ81340 ATUX PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
+ pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
- res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
- res[1].end = IOP13XX_PCIX_UPPER_MEM_RA;
- res[1].name = "IQ81340 ATUX PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
+ res->start = IOP13XX_PCIX_LOWER_MEM_RA;
+ res->end = IOP13XX_PCIX_UPPER_MEM_RA;
+ res->name = "IQ81340 ATUX PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
- sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
break;
case IOP13XX_INIT_ATU_ATUE:
/* Note: the function number field in the PCSR is ro */
__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
- res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
- res[0].end = IOP13XX_PCIE_UPPER_IO_PA;
- res[0].name = "IQ81340 ATUE PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
+ pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
- res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
- res[1].end = IOP13XX_PCIE_UPPER_MEM_RA;
- res[1].name = "IQ81340 ATUE PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
+ res->start = IOP13XX_PCIE_LOWER_MEM_RA;
+ res->end = IOP13XX_PCIE_UPPER_MEM_RA;
+ res->name = "IQ81340 ATUE PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
- sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
sys->map_irq = iop13xx_pcie_map_irq;
break;
default:
return 0;
}
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
+ request_resource(&iomem_resource, res);
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
#include <linux/types.h>
-extern u32 iop13xx_atue_mem_base;
-extern u32 iop13xx_atux_mem_base;
+extern void __iomem *iop13xx_atue_mem_base;
+extern void __iomem *iop13xx_atux_mem_base;
extern size_t iop13xx_atue_mem_size;
extern size_t iop13xx_atux_mem_size;
*/
static struct map_desc iop13xx_std_desc[] __initdata = {
{ /* mem mapped registers */
- .virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
+ .virtual = (unsigned long)IOP13XX_PMMR_VIRT_MEM_BASE,
.pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
.length = IOP13XX_PMMR_SIZE,
.type = MT_DEVICE,
- }, { /* PCIE IO space */
- .virtual = IOP13XX_PCIE_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
- .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
- }, { /* PCIX IO space */
- .virtual = IOP13XX_PCIX_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
- .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
},
};
static struct plat_serial8250_port iop13xx_uart0_data[] = {
{
- .membase = (char*)(IOP13XX_UART0_VIRT),
- .mapbase = (IOP13XX_UART0_PHYS),
+ .membase = IOP13XX_UART0_VIRT,
+ .mapbase = IOP13XX_UART0_PHYS,
.irq = IRQ_IOP13XX_UART0,
.uartclk = IOP13XX_UART_XTAL,
.regshift = 2,
static struct plat_serial8250_port iop13xx_uart1_data[] = {
{
- .membase = (char*)(IOP13XX_UART1_VIRT),
- .mapbase = (IOP13XX_UART1_PHYS),
+ .membase = IOP13XX_UART1_VIRT,
+ .mapbase = IOP13XX_UART1_PHYS,
.irq = IRQ_IOP13XX_UART1,
.uartclk = IOP13XX_UART_XTAL,
.regshift = 2,
static void glantank_power_off(void)
{
- __raw_writeb(0x01, 0xfe8d0004);
+ __raw_writeb(0x01, IOMEM(0xfe8d0004));
while (1)
;
+++ /dev/null
-/*
- * arch/arm/mach-iop32x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-iop33x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
*************************************************************************/
static struct map_desc ixp4xx_io_desc[] __initdata = {
{ /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
- .virtual = IXP4XX_PERIPHERAL_BASE_VIRT,
+ .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
.length = IXP4XX_PERIPHERAL_REGION_SIZE,
.type = MT_DEVICE
}, { /* Expansion Bus Config Registers */
- .virtual = IXP4XX_EXP_CFG_BASE_VIRT,
+ .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = IXP4XX_EXP_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* PCI Registers */
- .virtual = IXP4XX_PCI_CFG_BASE_VIRT,
+ .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
},
#ifdef CONFIG_DEBUG_LL
{ /* Debug UART mapping */
- .virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
+ .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
.length = IXP4XX_DEBUG_UART_REGION_SIZE,
.type = MT_DEVICE
#ifndef __ASM_ARCH_CPU_H__
#define __ASM_ARCH_CPU_H__
+#include <linux/io.h>
#include <asm/cputype.h>
/* Processor id value in CP15 Register 0 */
static inline u32 ixp4xx_read_feature_bits(void)
{
- u32 val = ~*IXP4XX_EXP_CFG2;
+ u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
if (cpu_is_ixp42x_rev_a0())
return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
static inline void ixp4xx_write_feature_bits(u32 value)
{
- *IXP4XX_EXP_CFG2 = ~value;
+ __raw_writel(~value, IXP4XX_EXP_CFG2);
}
#endif /* _ASM_ARCH_CPU_H */
+++ /dev/null
-/* empty */
-
* Expansion BUS Configuration registers
*/
#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
+#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000)
#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
/*
* PCI Config registers
*/
#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
-#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000)
+#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000)
#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
/*
* Peripheral space
*/
#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000)
#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
/*
* aligned so that it * can be used with the low-level debug code.
*/
#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000)
-#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000)
+#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000)
#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
#define IXP4XX_EXP_CS0_OFFSET 0x00
/*
* Expansion Bus Controller registers.
*/
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb
dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb
dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
/*****************************************************************************
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE1_IO_SIZE,
- .type = MT_DEVICE,
- }, {
.virtual = KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
+++ /dev/null
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
- + KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-
-#endif
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
- unsigned *addr;
- int num_addr;
- unsigned *data;
- int num_data;
- unsigned enable;
-};
-
-enum netxbig_led_mode {
- NETXBIG_LED_OFF,
- NETXBIG_LED_ON,
- NETXBIG_LED_SATA,
- NETXBIG_LED_TIMER1,
- NETXBIG_LED_TIMER2,
- NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
- unsigned long delay_on;
- unsigned long delay_off;
- enum netxbig_led_mode mode;
-};
-
-struct netxbig_led {
- const char *name;
- const char *default_trigger;
- int mode_addr;
- int *mode_val;
- int bright_addr;
-};
-
-struct netxbig_led_platform_data {
- struct netxbig_gpio_ext *gpio_ext;
- struct netxbig_led_timer *timer;
- int num_timer;
- struct netxbig_led *leds;
- int num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
- const char *name;
- const char *default_trigger;
- unsigned cmd;
- unsigned slow;
-};
-
-struct ns2_led_platform_data {
- int num_leds;
- struct ns2_led *leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
void __iomem *base;
spinlock_t conf_lock;
int irq;
- struct resource res[2];
+ struct resource res;
};
static int pcie_port_map[2];
pp->base = (void __iomem *)PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
- /*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 0 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
/*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 0 MEM";
- pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 0 MEM";
+ pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static void __init pcie1_ioresources_init(struct pcie_port *pp)
pp->base = (void __iomem *)PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
- /*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 1 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
/*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 1 MEM";
- pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 1 MEM";
+ pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
case 0:
kirkwood_enable_pcie_clk("0");
pcie0_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
break;
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
}
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe%d IO resource failed\n", index);
- if (request_resource(&iomem_resource, &pp->res[1]))
+ if (request_resource(&iomem_resource, &pp->res))
panic("Request PCIe%d Memory resource failed\n", index);
- sys->io_offset = 0;
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
/*
* Generic PCIe unit setup.
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#define RD88F6192_GPIO_USB_VBUS 10
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
static struct __initdata map_desc ks8695_io_desc[] = {
{
- .virtual = KS8695_IO_VA,
+ .virtual = (unsigned long)KS8695_IO_VA,
.pfn = __phys_to_pfn(KS8695_IO_PA),
.length = KS8695_IO_SIZE,
.type = MT_DEVICE,
* head debug code as the initial MMU setup only deals in L1 sections.
*/
#define KS8695_IO_PA 0x03F00000
-#define KS8695_IO_VA 0xF0000000
+#define KS8695_IO_VA IOMEM(0xF0000000)
#define KS8695_IO_SIZE SZ_1M
#define KS8695_PCIMEM_PA 0x60000000
+++ /dev/null
-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
-#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON (0x00) /* Timer Control Register */
-#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
-#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
-#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
-#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
-#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
-
-
-#endif
static void putc(char c)
{
- while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+ while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
barrier();
- __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+ __raw_writel(c, (void __iomem*)KS8695_UART_PA + KS8695_URTH);
}
static inline void flush(void)
{
- while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+ while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
barrier();
}
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/clockchips.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/regs-timer.h>
#include <mach/regs-irq.h>
#include "generic.h"
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
+
/*
- * Returns number of ms since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
+ * Timer registers
*/
-static unsigned long ks8695_gettimeoffset (void)
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
+#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
+
+/* Timer Control Register */
+#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
+
+static void ks8695_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- unsigned long elapsed, tick2, intpending;
+ u32 tmcon;
- /*
- * Get the current number of ticks. Note that there is a race
- * condition between us reading the timer and checking for an
- * interrupt. We solve this by ensuring that the counter has not
- * reloaded between our two reads.
- */
- elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
- do {
- tick2 = elapsed;
- intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
- elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
- } while (elapsed > tick2);
-
- /* Convert to number of ticks expired (not remaining) */
- elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
-
- /* Is interrupt pending? If so, then timer has been reloaded already. */
- if (intpending)
- elapsed += (CLOCK_TICK_RATE / HZ);
-
- /* Convert ticks to usecs */
- return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+ if (mode == CLOCK_EVT_FEAT_PERIODIC) {
+ u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+ u32 half = DIV_ROUND_CLOSEST(rate, 2);
+
+ /* Disable timer 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* Both registers need to count down */
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+ /* Re-enable timer1 */
+ tmcon |= TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+ }
}
+static int ks8695_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+
+{
+ u32 half = DIV_ROUND_CLOSEST(cycles, 2);
+ u32 tmcon;
+
+ /* Disable timer 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* Both registers need to count down */
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+ /* Re-enable timer1 */
+ tmcon |= TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+ return 0;
+}
+
+static struct clock_event_device clockevent_ks8695 = {
+ .name = "ks8695_t1tc",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .set_next_event = ks8695_set_next_event,
+ .set_mode = ks8695_set_mode,
+};
+
/*
* IRQ handler for the timer.
*/
static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *evt = &clockevent_ks8695;
+
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
static void ks8695_timer_setup(void)
{
- unsigned long tmout = CLOCK_TICK_RATE / HZ;
unsigned long tmcon;
- /* disable timer1 */
- tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
-
- __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
- __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
+ /* Disable timer 0 and 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T0EN;
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- /* re-enable timer1 */
- __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+ /*
+ * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles
+ * (one on each counter) maximum 2*2^32, but the API will only
+ * accept up to a 32bit full word (0xFFFFFFFFU).
+ */
+ clockevents_config_and_register(&clockevent_ks8695,
+ KS8695_CLOCK_RATE, 2,
+ 0xFFFFFFFFU);
}
static void __init ks8695_timer_init (void)
struct sys_timer ks8695_timer = {
.init = ks8695_timer_init,
- .offset = ks8695_gettimeoffset,
- .resume = ks8695_timer_setup,
};
void ks8695_restart(char mode, const char *cmd)
soft_restart(0);
/* disable timer0 */
- reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
/* enable watchdog mode */
- __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+ writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
/* re-enable timer0 */
- __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
}
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
static struct map_desc lpc32xx_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(LPC32XX_AHB0_START),
+ .virtual = (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),
.pfn = __phys_to_pfn(LPC32XX_AHB0_START),
.length = LPC32XX_AHB0_SIZE,
.type = MT_DEVICE
},
{
- .virtual = IO_ADDRESS(LPC32XX_AHB1_START),
+ .virtual = (unsigned long)IO_ADDRESS(LPC32XX_AHB1_START),
.pfn = __phys_to_pfn(LPC32XX_AHB1_START),
.length = LPC32XX_AHB1_SIZE,
.type = MT_DEVICE
},
{
- .virtual = IO_ADDRESS(LPC32XX_FABAPB_START),
+ .virtual = (unsigned long)IO_ADDRESS(LPC32XX_FABAPB_START),
.pfn = __phys_to_pfn(LPC32XX_FABAPB_START),
.length = LPC32XX_FABAPB_SIZE,
.type = MT_DEVICE
},
{
- .virtual = IO_ADDRESS(LPC32XX_IRAM_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(LPC32XX_IRAM_BASE),
.pfn = __phys_to_pfn(LPC32XX_IRAM_BASE),
.length = (LPC32XX_IRAM_BANK_SIZE * 2),
.type = MT_DEVICE
/*
* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
*/
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+#define IO_ADDRESS(x) IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
IO_BASE)
#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x))
case IRQ_TYPE_EDGE_RISING:
/* Rising edge sensitive */
__lpc32xx_set_irq_type(d->hwirq, 1, 1);
+ __irq_set_handler_locked(d->hwirq, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
/* Falling edge sensitive */
__lpc32xx_set_irq_type(d->hwirq, 0, 1);
+ __irq_set_handler_locked(d->hwirq, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
/* Low level sensitive */
__lpc32xx_set_irq_type(d->hwirq, 0, 0);
+ __irq_set_handler_locked(d->hwirq, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
/* High level sensitive */
__lpc32xx_set_irq_type(d->hwirq, 1, 0);
+ __irq_set_handler_locked(d->hwirq, handle_level_irq);
break;
/* Other modes are not supported */
return -EINVAL;
}
- /* Ok to use the level handler for all types */
- irq_set_handler(d->hwirq, handle_level_irq);
-
return 0;
}
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
+#include <linux/mtd/lpc32xx_slc.h>
+#include <linux/mtd/lpc32xx_mlc.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
* gather, and the MMCI driver doesn't do it this way */
};
+static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
+ .dma_filter = pl08x_filter_id,
+};
+
+static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
+ .dma_filter = pl08x_filter_id,
+};
+
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
&lpc32xx_mmci_data),
+ OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
+ &lpc32xx_slc_data),
+ OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
+ &lpc32xx_mlc_data),
{ }
};
of_platform_populate(NULL, of_default_bus_match_table,
lpc32xx_auxdata_lookup, NULL);
-
- /* Register GPIOs used on this board */
- if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
- pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
- else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
- pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
}
static char const *lpc32xx_dt_compat[] __initdata = {
config CPU_PXA168
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
+ select COMMON_CLK
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
# Makefile for Marvell's PXA168 processors line
#
-obj-y += common.o clock.o devices.o time.o irq.o
+obj-y += common.o devices.o time.o irq.o
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o
+ifeq ($(CONFIG_COMMON_CLK), )
+obj-y += clock.o
+obj-$(CONFIG_CPU_PXA168) += clock-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clock-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clock-mmp2.o
+endif
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o
obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o
#include <mach/irqs.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "common.h"
--- /dev/null
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_RTC APBC_REG(0x000)
+#define APBC_TWSI1 APBC_REG(0x004)
+#define APBC_TWSI2 APBC_REG(0x008)
+#define APBC_TWSI3 APBC_REG(0x00c)
+#define APBC_TWSI4 APBC_REG(0x010)
+#define APBC_KPC APBC_REG(0x018)
+#define APBC_UART1 APBC_REG(0x02c)
+#define APBC_UART2 APBC_REG(0x030)
+#define APBC_UART3 APBC_REG(0x034)
+#define APBC_GPIO APBC_REG(0x038)
+#define APBC_PWM0 APBC_REG(0x03c)
+#define APBC_PWM1 APBC_REG(0x040)
+#define APBC_PWM2 APBC_REG(0x044)
+#define APBC_PWM3 APBC_REG(0x048)
+#define APBC_SSP0 APBC_REG(0x04c)
+#define APBC_SSP1 APBC_REG(0x050)
+#define APBC_SSP2 APBC_REG(0x054)
+#define APBC_SSP3 APBC_REG(0x058)
+#define APBC_SSP4 APBC_REG(0x05c)
+#define APBC_SSP5 APBC_REG(0x060)
+#define APBC_TWSI5 APBC_REG(0x07c)
+#define APBC_TWSI6 APBC_REG(0x080)
+#define APBC_UART4 APBC_REG(0x088)
+
+#define APMU_USB APMU_REG(0x05c)
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_SDH0 APMU_REG(0x054)
+#define APMU_SDH1 APMU_REG(0x058)
+#define APMU_SDH2 APMU_REG(0x0e8)
+#define APMU_SDH3 APMU_REG(0x0ec)
+
+static void sdhc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst |= clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst &= ~clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+ .enable = sdhc_clk_enable,
+ .disable = sdhc_clk_disable,
+};
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 26000000);
+static APBC_CLK(uart2, UART2, 1, 26000000);
+static APBC_CLK(uart3, UART3, 1, 26000000);
+static APBC_CLK(uart4, UART4, 1, 26000000);
+static APBC_CLK(twsi1, TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, TWSI6, 0, 26000000);
+static APBC_CLK(gpio, GPIO, 0, 26000000);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
+
+static struct clk_lookup mmp2_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+ INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+ INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+ INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
+};
+
+void __init mmp2_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+}
--- /dev/null
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_UART1 APBC_REG(0x000)
+#define APBC_UART2 APBC_REG(0x004)
+#define APBC_GPIO APBC_REG(0x008)
+#define APBC_PWM1 APBC_REG(0x00c)
+#define APBC_PWM2 APBC_REG(0x010)
+#define APBC_PWM3 APBC_REG(0x014)
+#define APBC_PWM4 APBC_REG(0x018)
+#define APBC_RTC APBC_REG(0x028)
+#define APBC_TWSI0 APBC_REG(0x02c)
+#define APBC_KPC APBC_REG(0x030)
+#define APBC_TWSI1 APBC_REG(0x06c)
+#define APBC_UART3 APBC_REG(0x070)
+#define APBC_SSP1 APBC_REG(0x81c)
+#define APBC_SSP2 APBC_REG(0x820)
+#define APBC_SSP3 APBC_REG(0x84c)
+#define APBC_SSP4 APBC_REG(0x858)
+#define APBC_SSP5 APBC_REG(0x85c)
+
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_LCD APMU_REG(0x04c)
+#define APMU_ETH APMU_REG(0x0fc)
+#define APMU_USB APMU_REG(0x05c)
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 14745600);
+static APBC_CLK(uart2, UART2, 1, 14745600);
+static APBC_CLK(uart3, UART3, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(ssp1, SSP1, 4, 0);
+static APBC_CLK(ssp2, SSP2, 4, 0);
+static APBC_CLK(ssp3, SSP3, 4, 0);
+static APBC_CLK(ssp4, SSP4, 4, 0);
+static APBC_CLK(ssp5, SSP5, 4, 0);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(keypad, KPC, 0, 32000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+ INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+ INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+ INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+ INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+ INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+ INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa168_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+}
--- /dev/null
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_UART0 APBC_REG(0x000)
+#define APBC_UART1 APBC_REG(0x004)
+#define APBC_GPIO APBC_REG(0x008)
+#define APBC_PWM1 APBC_REG(0x00c)
+#define APBC_PWM2 APBC_REG(0x010)
+#define APBC_PWM3 APBC_REG(0x014)
+#define APBC_PWM4 APBC_REG(0x018)
+#define APBC_SSP1 APBC_REG(0x01c)
+#define APBC_SSP2 APBC_REG(0x020)
+#define APBC_RTC APBC_REG(0x028)
+#define APBC_TWSI0 APBC_REG(0x02c)
+#define APBC_KPC APBC_REG(0x030)
+#define APBC_SSP3 APBC_REG(0x04c)
+#define APBC_TWSI1 APBC_REG(0x06c)
+
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_USB APMU_REG(0x05c)
+
+static APBC_CLK(uart1, UART0, 1, 14745600);
+static APBC_CLK(uart2, UART1, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa910_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+}
extern void __init icu_init_irq(void);
extern void __init mmp_map_io(void);
extern void mmp_restart(char, const char *);
+extern void __init pxa168_clk_init(void);
+extern void __init pxa910_clk_init(void);
+extern void __init mmp2_clk_init(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/cputype.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
#include <mach/addr-map.h>
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_PXA168_UART1 APBC_REG(0x000)
-#define APBC_PXA168_UART2 APBC_REG(0x004)
-#define APBC_PXA168_GPIO APBC_REG(0x008)
-#define APBC_PXA168_PWM1 APBC_REG(0x00c)
-#define APBC_PXA168_PWM2 APBC_REG(0x010)
-#define APBC_PXA168_PWM3 APBC_REG(0x014)
-#define APBC_PXA168_PWM4 APBC_REG(0x018)
-#define APBC_PXA168_RTC APBC_REG(0x028)
-#define APBC_PXA168_TWSI0 APBC_REG(0x02c)
-#define APBC_PXA168_KPC APBC_REG(0x030)
-#define APBC_PXA168_TIMERS APBC_REG(0x034)
-#define APBC_PXA168_AIB APBC_REG(0x03c)
-#define APBC_PXA168_SW_JTAG APBC_REG(0x040)
-#define APBC_PXA168_ONEWIRE APBC_REG(0x048)
-#define APBC_PXA168_ASFAR APBC_REG(0x050)
-#define APBC_PXA168_ASSAR APBC_REG(0x054)
-#define APBC_PXA168_TWSI1 APBC_REG(0x06c)
-#define APBC_PXA168_UART3 APBC_REG(0x070)
-#define APBC_PXA168_AC97 APBC_REG(0x084)
-#define APBC_PXA168_SSP1 APBC_REG(0x81c)
-#define APBC_PXA168_SSP2 APBC_REG(0x820)
-#define APBC_PXA168_SSP3 APBC_REG(0x84c)
-#define APBC_PXA168_SSP4 APBC_REG(0x858)
-#define APBC_PXA168_SSP5 APBC_REG(0x85c)
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_PXA910_UART0 APBC_REG(0x000)
-#define APBC_PXA910_UART1 APBC_REG(0x004)
-#define APBC_PXA910_GPIO APBC_REG(0x008)
-#define APBC_PXA910_PWM1 APBC_REG(0x00c)
-#define APBC_PXA910_PWM2 APBC_REG(0x010)
-#define APBC_PXA910_PWM3 APBC_REG(0x014)
-#define APBC_PXA910_PWM4 APBC_REG(0x018)
-#define APBC_PXA910_SSP1 APBC_REG(0x01c)
-#define APBC_PXA910_SSP2 APBC_REG(0x020)
-#define APBC_PXA910_IPC APBC_REG(0x024)
-#define APBC_PXA910_RTC APBC_REG(0x028)
-#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
-#define APBC_PXA910_KPC APBC_REG(0x030)
-#define APBC_PXA910_TIMERS APBC_REG(0x034)
-#define APBC_PXA910_TBROT APBC_REG(0x038)
-#define APBC_PXA910_AIB APBC_REG(0x03c)
-#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
-#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
-#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
-#define APBC_PXA910_SSP3 APBC_REG(0x04c)
-#define APBC_PXA910_ASFAR APBC_REG(0x050)
-#define APBC_PXA910_ASSAR APBC_REG(0x054)
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_MMP2_RTC APBC_REG(0x000)
-#define APBC_MMP2_TWSI1 APBC_REG(0x004)
-#define APBC_MMP2_TWSI2 APBC_REG(0x008)
-#define APBC_MMP2_TWSI3 APBC_REG(0x00c)
-#define APBC_MMP2_TWSI4 APBC_REG(0x010)
-#define APBC_MMP2_ONEWIRE APBC_REG(0x014)
-#define APBC_MMP2_KPC APBC_REG(0x018)
-#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c)
-#define APBC_MMP2_SW_JTAG APBC_REG(0x020)
-#define APBC_MMP2_TIMERS APBC_REG(0x024)
-#define APBC_MMP2_UART1 APBC_REG(0x02c)
-#define APBC_MMP2_UART2 APBC_REG(0x030)
-#define APBC_MMP2_UART3 APBC_REG(0x034)
-#define APBC_MMP2_GPIO APBC_REG(0x038)
-#define APBC_MMP2_PWM0 APBC_REG(0x03c)
-#define APBC_MMP2_PWM1 APBC_REG(0x040)
-#define APBC_MMP2_PWM2 APBC_REG(0x044)
-#define APBC_MMP2_PWM3 APBC_REG(0x048)
-#define APBC_MMP2_SSP0 APBC_REG(0x04c)
-#define APBC_MMP2_SSP1 APBC_REG(0x050)
-#define APBC_MMP2_SSP2 APBC_REG(0x054)
-#define APBC_MMP2_SSP3 APBC_REG(0x058)
-#define APBC_MMP2_SSP4 APBC_REG(0x05c)
-#define APBC_MMP2_SSP5 APBC_REG(0x060)
-#define APBC_MMP2_AIB APBC_REG(0x064)
-#define APBC_MMP2_ASFAR APBC_REG(0x068)
-#define APBC_MMP2_ASSAR APBC_REG(0x06c)
-#define APBC_MMP2_USIM APBC_REG(0x070)
-#define APBC_MMP2_MPMU APBC_REG(0x074)
-#define APBC_MMP2_IPC APBC_REG(0x078)
-#define APBC_MMP2_TWSI5 APBC_REG(0x07c)
-#define APBC_MMP2_TWSI6 APBC_REG(0x080)
-#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084)
-#define APBC_MMP2_UART4 APBC_REG(0x088)
-#define APBC_MMP2_RIPC APBC_REG(0x08c)
-#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */
-#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4)
-
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
#include <mach/addr-map.h>
-/* Clock Reset Control */
-#define APMU_IRE APMU_REG(0x048)
-#define APMU_LCD APMU_REG(0x04c)
-#define APMU_CCIC APMU_REG(0x050)
-#define APMU_SDH0 APMU_REG(0x054)
-#define APMU_SDH1 APMU_REG(0x058)
-#define APMU_USB APMU_REG(0x05c)
-#define APMU_NAND APMU_REG(0x060)
-#define APMU_DMA APMU_REG(0x064)
-#define APMU_GEU APMU_REG(0x068)
-#define APMU_BUS APMU_REG(0x06c)
-#define APMU_SDH2 APMU_REG(0x0e8)
-#define APMU_SDH3 APMU_REG(0x0ec)
-#define APMU_ETH APMU_REG(0x0fc)
-
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
#define APMU_FNRST_DIS (1 << 1)
+++ /dev/null
-/*
- * linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- * SRAM Memory Management
- *
- * Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY 512
-
-enum sram_type {
- MMP_SRAM_UNDEFINED = 0,
- MMP_ASRAM,
- MMP_ISRAM,
-};
-
-struct sram_platdata {
- char *pool_name;
- int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
status = readl_relaxed(data->reg_status) & ~mask;
if (status == 0)
break;
- n = find_first_bit(&status, BITS_PER_LONG);
- while (n < BITS_PER_LONG) {
+ for_each_set_bit(n, &status, BITS_PER_LONG) {
generic_handle_irq(icu_data[i].virq_base + n);
- n = find_next_bit(&status, BITS_PER_LONG, n + 1);
}
}
}
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mmp2.h>
#include "common.h"
-#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
mmp2_init_icu();
}
-static void sdhc_clk_enable(struct clk *clk)
-{
- uint32_t clk_rst;
-
- clk_rst = __raw_readl(clk->clk_rst);
- clk_rst |= clk->enable_val;
- __raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
- uint32_t clk_rst;
-
- clk_rst = __raw_readl(clk->clk_rst);
- clk_rst &= ~clk->enable_val;
- __raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
- .enable = sdhc_clk_enable,
- .disable = sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
-static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
-static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
-static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
-static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
- INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
- INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
- INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
static int __init mmp2_init(void)
{
if (cpu_is_mmp2()) {
#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init();
+ tauros2_init(0);
#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(mmp2_addr_map);
pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
- clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+ mmp2_clk_init();
}
return 0;
}
postcore_initcall(mmp2_init);
+#define APBC_TIMERS APBC_REG(0x024)
+
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
- __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+ __raw_writel(clk_rst, APBC_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/addr-map.h>
#include <mach/cputype.h>
+#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
icu_init_irq();
}
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
-static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
-static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
-static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
-static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
-static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
-static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
-static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
-static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
-static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
- INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
- INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
- INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
- INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
- INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
- INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
- INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
- INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
- INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
- INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
static int __init pxa168_init(void)
{
if (cpu_is_pxa168()) {
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa168_mfp_addr_map);
pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
- clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+ pxa168_clk_init();
}
return 0;
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS APBC_REG(0x34)
static void __init pxa168_timer_init(void)
{
* ourselves instead of using clk_* API. Clock rate is defined
* by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
*/
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
/* 3.25MHz, bus/functional clock enabled, release reset */
- __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
timer_init(IRQ_PXA168_TIMER1);
}
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include "common.h"
-#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
icu_init_irq();
}
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
-static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
-static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
- INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
- INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
- INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
- INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
static int __init pxa910_init(void)
{
if (cpu_is_pxa910()) {
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa910_mfp_addr_map);
pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
- clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+ pxa910_clk_init();
}
return 0;
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS APBC_REG(0x34)
static void __init pxa910_timer_init(void)
{
/* reset and configure */
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
- __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
timer_init(IRQ_PXA910_AP1_TIMER1);
}
#include <linux/slab.h>
#include <linux/genalloc.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
struct sram_bank_info {
char *pool_name;
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
config ARCH_MSM8X60
bool "MSM8X60"
- select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
- && !MACH_MSM8X60_FFA)
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select USE_OF
config ARCH_MSM8960
bool "MSM8960"
select ARCH_MSM_SCORPIONMP
- select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select USE_OF
endchoice
help
Support for the Qualcomm ST1.5.
-config MACH_MSM8X60_RUMI3
- depends on ARCH_MSM8X60
- bool "MSM8x60 RUMI3"
- help
- Support for the Qualcomm MSM8x60 RUMI3 emulator.
-
-config MACH_MSM8X60_SURF
- depends on ARCH_MSM8X60
- bool "MSM8x60 SURF"
- help
- Support for the Qualcomm MSM8x60 SURF eval board.
-
-config MACH_MSM8X60_SIM
- depends on ARCH_MSM8X60
- bool "MSM8x60 Simulator"
- help
- Support for the Qualcomm MSM8x60 simulator.
-
-config MACH_MSM8X60_FFA
- depends on ARCH_MSM8X60
- bool "MSM8x60 FFA"
- help
- Support for the Qualcomm MSM8x60 FFA eval board.
-
-config MACH_MSM8960_SIM
- depends on ARCH_MSM8960
- bool "MSM8960 Simulator"
- help
- Support for the Qualcomm MSM8960 simulator.
-
-config MACH_MSM8960_RUMI3
- depends on ARCH_MSM8960
- bool "MSM8960 RUMI3"
- help
- Support for the Qualcomm MSM8960 RUMI3 emulator.
-
endmenu
config MSM_SMD_PKG3
-obj-y += io.o idle.o timer.o
+obj-y += io.o timer.o
obj-y += clock.o
obj-$(CONFIG_DEBUG_FS) += clock-debug.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
+obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
+++ /dev/null
-/* arch/arm/mach-msm/acpuclock.c
- *
- * MSM architecture clock driver
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-#include "acpuclock.h"
-
-
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-/*
- * ARM11 clock configuration for specific ACPU speeds
- */
-
-#define ACPU_PLL_TCXO -1
-#define ACPU_PLL_0 0
-#define ACPU_PLL_1 1
-#define ACPU_PLL_2 2
-#define ACPU_PLL_3 3
-
-#define PERF_SWITCH_DEBUG 0
-#define PERF_SWITCH_STEP_DEBUG 0
-
-struct clock_state
-{
- struct clkctl_acpu_speed *current_speed;
- struct mutex lock;
- uint32_t acpu_switch_time_us;
- uint32_t max_speed_delta_khz;
- uint32_t vdd_switch_time_us;
- unsigned long power_collapse_khz;
- unsigned long wait_for_irq_khz;
-};
-
-static struct clk *ebi1_clk;
-static struct clock_state drv_state = { 0 };
-
-static void __init acpuclk_init(void);
-
-/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
-enum {
- VDD_0 = 0,
- VDD_1 = 1,
- VDD_2 = 2,
- VDD_3 = 3,
- VDD_4 = 3,
- VDD_5 = 3,
- VDD_6 = 3,
- VDD_7 = 7,
- VDD_END
-};
-
-struct clkctl_acpu_speed {
- unsigned int a11clk_khz;
- int pll;
- unsigned int a11clk_src_sel;
- unsigned int a11clk_src_div;
- unsigned int ahbclk_khz;
- unsigned int ahbclk_div;
- int vdd;
- unsigned int axiclk_khz;
- unsigned long lpj; /* loops_per_jiffy */
-/* Index in acpu_freq_tbl[] for steppings. */
- short down;
- short up;
-};
-
-/*
- * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initialize loops_per_jiffy to 0.
- *
- * Table stepping up/down is optimized for 256mhz jumps while staying on the
- * same PLL.
- */
-#if (0)
-static struct clkctl_acpu_speed acpu_freq_tbl[] = {
- { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
- { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 },
- { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 },
- { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 },
- { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 },
- { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 },
- { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 },
- { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 },
- { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 },
- { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
- { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 },
- { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 },
- { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
- { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#else /* Table of freq we currently use. */
-static struct clkctl_acpu_speed acpu_freq_tbl[] = {
- { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
- { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
- { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
- { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
- { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
- { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
- { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
- { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ_TABLE
-static struct cpufreq_frequency_table freq_table[] = {
- { 0, 122880 },
- { 1, 128000 },
- { 2, 245760 },
- { 3, 384000 },
- { 4, 528000 },
- { 5, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int pc_pll_request(unsigned id, unsigned on)
-{
- int res;
- on = !!on;
-
-#if PERF_SWITCH_DEBUG
- if (on)
- printk(KERN_DEBUG "Enabling PLL %d\n", id);
- else
- printk(KERN_DEBUG "Disabling PLL %d\n", id);
-#endif
-
- res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
- if (res < 0)
- return res;
-
-#if PERF_SWITCH_DEBUG
- if (on)
- printk(KERN_DEBUG "PLL %d enabled\n", id);
- else
- printk(KERN_DEBUG "PLL %d disabled\n", id);
-#endif
- return res;
-}
-
-
-/*----------------------------------------------------------------------------
- * ARM11 'owned' clock control
- *---------------------------------------------------------------------------*/
-
-unsigned long acpuclk_power_collapse(void) {
- int ret = acpuclk_get_rate();
- ret *= 1000;
- if (ret > drv_state.power_collapse_khz)
- acpuclk_set_rate(drv_state.power_collapse_khz, 1);
- return ret;
-}
-
-unsigned long acpuclk_get_wfi_rate(void)
-{
- return drv_state.wait_for_irq_khz;
-}
-
-unsigned long acpuclk_wait_for_irq(void) {
- int ret = acpuclk_get_rate();
- ret *= 1000;
- if (ret > drv_state.wait_for_irq_khz)
- acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
- return ret;
-}
-
-static int acpuclk_set_vdd_level(int vdd)
-{
- uint32_t current_vdd;
-
- current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
- current_vdd, vdd);
-#endif
- writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
- udelay(drv_state.vdd_switch_time_us);
- if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
-#if PERF_SWITCH_DEBUG
- printk(KERN_ERR "acpuclock: VDD set failed\n");
-#endif
- return -EIO;
- }
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "acpuclock: VDD switched\n");
-#endif
- return 0;
-}
-
-/* Set proper dividers for the given clock speed. */
-static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
- uint32_t reg_clkctl, reg_clksel, clk_div;
-
- /* AHB_CLK_DIV */
- clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
- /*
- * If the new clock divider is higher than the previous, then
- * program the divider before switching the clock
- */
- if (hunt_s->ahbclk_div > clk_div) {
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~(0x3 << 1);
- reg_clksel |= (hunt_s->ahbclk_div << 1);
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
- if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
- /* SRC0 */
-
- /* Program clock source */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0x07 << 4);
- reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock divider */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~0xf;
- reg_clkctl |= hunt_s->a11clk_src_div;
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock source selection */
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- } else {
- /* SRC1 */
-
- /* Program clock source */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0x07 << 12);
- reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock divider */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0xf << 8);
- reg_clkctl |= (hunt_s->a11clk_src_div << 8);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock source selection */
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
-
- /*
- * If the new clock divider is lower than the previous, then
- * program the divider after switching the clock
- */
- if (hunt_s->ahbclk_div < clk_div) {
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~(0x3 << 1);
- reg_clksel |= (hunt_s->ahbclk_div << 1);
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
-}
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
-{
- uint32_t reg_clkctl;
- struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
- int rc = 0;
- unsigned int plls_enabled = 0, pll;
-
- strt_s = cur_s = drv_state.current_speed;
-
- WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
- if (cur_s == NULL)
- return -ENOENT;
-
- if (rate == (cur_s->a11clk_khz * 1000))
- return 0;
-
- for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
- if (tgt_s->a11clk_khz == (rate / 1000))
- break;
- }
-
- if (tgt_s->a11clk_khz == 0)
- return -EINVAL;
-
- /* Choose the highest speed speed at or below 'rate' with same PLL. */
- if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
- while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
- tgt_s--;
- }
-
- if (strt_s->pll != ACPU_PLL_TCXO)
- plls_enabled |= 1 << strt_s->pll;
-
- if (!for_power_collapse) {
- mutex_lock(&drv_state.lock);
- if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
- rc = pc_pll_request(tgt_s->pll, 1);
- if (rc < 0) {
- pr_err("PLL%d enable failed (%d)\n",
- tgt_s->pll, rc);
- goto out;
- }
- plls_enabled |= 1 << tgt_s->pll;
- }
- /* Increase VDD if needed. */
- if (tgt_s->vdd > cur_s->vdd) {
- if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
- printk(KERN_ERR "Unable to switch ACPU vdd\n");
- goto out;
- }
- }
- }
-
- /* Set wait states for CPU between frequency changes */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
- strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
-#endif
-
- while (cur_s != tgt_s) {
- /*
- * Always jump to target freq if within 256mhz, regulardless of
- * PLL. If differnece is greater, use the predefinied
- * steppings in the table.
- */
- int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
- if (d > drv_state.max_speed_delta_khz) {
- /* Step up or down depending on target vs current. */
- int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
- cur_s->up : cur_s->down;
- if (clk_index < 0) { /* This should not happen. */
- printk(KERN_ERR "cur:%u target: %u\n",
- cur_s->a11clk_khz, tgt_s->a11clk_khz);
- rc = -EINVAL;
- goto out;
- }
- cur_s = &acpu_freq_tbl[clk_index];
- } else {
- cur_s = tgt_s;
- }
-#if PERF_SWITCH_STEP_DEBUG
- printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
- __FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
-#endif
- if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
- && !(plls_enabled & (1 << cur_s->pll))) {
- rc = pc_pll_request(cur_s->pll, 1);
- if (rc < 0) {
- pr_err("PLL%d enable failed (%d)\n",
- cur_s->pll, rc);
- goto out;
- }
- plls_enabled |= 1 << cur_s->pll;
- }
-
- acpuclk_set_div(cur_s);
- drv_state.current_speed = cur_s;
- /* Re-adjust lpj for the new clock speed. */
- loops_per_jiffy = cur_s->lpj;
- udelay(drv_state.acpu_switch_time_us);
- }
-
- /* Nothing else to do for power collapse. */
- if (for_power_collapse)
- return 0;
-
- /* Disable PLLs we are not using anymore. */
- plls_enabled &= ~(1 << tgt_s->pll);
- for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
- if (plls_enabled & (1 << pll)) {
- rc = pc_pll_request(pll, 0);
- if (rc < 0) {
- pr_err("PLL%d disable failed (%d)\n", pll, rc);
- goto out;
- }
- }
-
- /* Change the AXI bus frequency if we can. */
- if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
- rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
- if (rc < 0)
- pr_err("Setting AXI min rate failed!\n");
- }
-
- /* Drop VDD level if we can. */
- if (tgt_s->vdd < strt_s->vdd) {
- if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
- printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
- }
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
-#endif
-out:
- if (!for_power_collapse)
- mutex_unlock(&drv_state.lock);
- return rc;
-}
-
-static void __init acpuclk_init(void)
-{
- struct clkctl_acpu_speed *speed;
- uint32_t div, sel;
- int rc;
-
- /*
- * Determine the rate of ACPU clock
- */
-
- if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
- /* CLK_SRC0_SEL */
- sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
- /* CLK_SRC0_DIV */
- div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
- } else {
- /* CLK_SRC1_SEL */
- sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
- /* CLK_SRC1_DIV */
- div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
- }
-
- for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
- if (speed->a11clk_src_sel == sel
- && (speed->a11clk_src_div == div))
- break;
- }
- if (speed->a11clk_khz == 0) {
- printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
- return;
- }
-
- drv_state.current_speed = speed;
-
- rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
- if (rc < 0)
- pr_err("Setting AXI min rate failed!\n");
-
- printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
-}
-
-unsigned long acpuclk_get_rate(void)
-{
- WARN_ONCE(drv_state.current_speed == NULL,
- "acpuclk_get_rate: not initialized\n");
- if (drv_state.current_speed)
- return drv_state.current_speed->a11clk_khz;
- else
- return 0;
-}
-
-uint32_t acpuclk_get_switch_time(void)
-{
- return drv_state.acpu_switch_time_us;
-}
-
-/*----------------------------------------------------------------------------
- * Clock driver initialization
- *---------------------------------------------------------------------------*/
-
-/* Initialize the lpj field in the acpu_freq_tbl. */
-static void __init lpj_init(void)
-{
- int i;
- const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
- for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
- acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
- base_clk->a11clk_khz,
- acpu_freq_tbl[i].a11clk_khz);
- }
-}
-
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
-{
- pr_info("acpu_clock_init()\n");
-
- ebi1_clk = clk_get(NULL, "ebi1_clk");
-
- mutex_init(&drv_state.lock);
- drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
- drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
- drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
- drv_state.power_collapse_khz = clkdata->power_collapse_khz;
- drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
- acpuclk_init();
- lpj_init();
-#ifdef CONFIG_CPU_FREQ_TABLE
- cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
-#endif
-}
+++ /dev/null
-/* arch/arm/mach-msm/acpuclock.h
- *
- * MSM architecture clock driver header
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
-unsigned long acpuclk_get_rate(void);
-uint32_t acpuclk_get_switch_time(void);
-unsigned long acpuclk_wait_for_irq(void);
-unsigned long acpuclk_power_collapse(void);
-unsigned long acpuclk_get_wfi_rate(void);
-
-
-#endif
-
--- /dev/null
+/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+ { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+ {}
+};
+
+static void __init msm8x60_init_irq(void)
+{
+ of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm8x60_init_late(void)
+{
+ smd_debugfs_init();
+}
+
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
+ .map_io = msm_map_msm8x60_io,
+ .init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
+ .init_machine = msm8x60_dt_init,
+ .init_late = msm8x60_init_late,
+ .timer = &msm_dt_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
--- /dev/null
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+ { .compatible = "qcom,msm-qgic2", .data = gic_of_init },
+ { }
+};
+
+static void __init msm_dt_init_irq(void)
+{
+ of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const msm8960_dt_match[] __initconst = {
+ "qcom,msm8960-cdp",
+ NULL
+};
+
+DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
+ .map_io = msm_map_msm8960_io,
+ .init_irq = msm_dt_init_irq,
+ .timer = &msm_dt_timer,
+ .init_machine = msm_dt_init,
+ .dt_compat = msm8960_dt_match,
+ .handle_irq = gic_handle_irq,
+MACHINE_END
#include <linux/mtd/partitions.h>
#include "devices.h"
+#include "common.h"
static struct resource smc91x_resources[] = {
[0] = {
&smc91x_device,
};
-extern struct sys_timer msm_timer;
-
static void __init halibut_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
.init_late = halibut_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x01_timer,
MACHINE_END
#include <mach/board.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include "board-mahimahi.h"
#include "devices.h"
+++ /dev/null
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x9C004300,
- .end = 0x9C0043ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSM_GPIO_TO_INT(132),
- .end = MSM_GPIO_TO_INT(132),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_dmov,
- &msm_device_nand,
- &smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
- if (socinfo_init() < 0)
- BUG();
-
- if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
- smc91x_resources[0].start = 0x98000300;
- smc91x_resources[0].end = 0x980003ff;
- smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
- smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
- if (gpio_tlmm_config(GPIO_CFG(85, 0,
- GPIO_INPUT,
- GPIO_PULL_DOWN,
- GPIO_2MA),
- GPIO_ENABLE)) {
- printk(KERN_ERR
- "%s: Err: Config GPIO-85 INT\n",
- __func__);
- }
- }
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
- msm_map_common_io();
- /* Technically dependent on the SoC but using machine_is
- * macros since socinfo is not available this early and there
- * are plans to restructure the code which will eliminate the
- * need for socinfo.
- */
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
- msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
- if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
- msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
- /* 7x27 has 256KB L2 cache:
- 64Kb/Way and 4-Way Associativity;
- R/W latency: 3 cycles;
- evmon/parity/share disabled. */
- l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
- }
-#endif
-}
-
-static void __init msm7x2x_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
#include "devices.h"
#include "gpiomux.h"
#include "proc_comm.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
struct meminfo *mi)
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
+++ /dev/null
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
- struct meminfo *mi)
-{
- for (; tag->hdr.size; tag = tag_next(tag))
- if (tag->hdr.tag == ATAG_MEM &&
- tag->u.mem.start == 0x40200000) {
- tag->u.mem.start = 0x40000000;
- tag->u.mem.size += SZ_2M;
- }
-}
-
-static void __init msm8960_reserve(void)
-{
- memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8960_map_io(void)
-{
- msm_map_msm8960_io();
-}
-
-static void __init msm8960_init_irq(void)
-{
- unsigned int i;
- gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
- (void *)MSM_QGIC_CPU_BASE);
-
- /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
- writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
- if (machine_is_msm8960_rumi3())
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
-}
-
-static struct platform_device *sim_devices[] __initdata = {
- &msm8960_device_uart_gsbi2,
-};
-
-static struct platform_device *rumi3_devices[] __initdata = {
- &msm8960_device_uart_gsbi5,
-};
-
-static void __init msm8960_sim_init(void)
-{
- platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-
-static void __init msm8960_rumi3_init(void)
-{
- platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-
-static void __init msm8960_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
- .fixup = msm8960_fixup,
- .reserve = msm8960_reserve,
- .map_io = msm8960_map_io,
- .init_irq = msm8960_init_irq,
- .timer = &msm_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8960_sim_init,
- .init_late = msm8960_init_late,
-MACHINE_END
-
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
- .fixup = msm8960_fixup,
- .reserve = msm8960_reserve,
- .map_io = msm8960_map_io,
- .init_irq = msm8960_init_irq,
- .timer = &msm_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8960_rumi3_init,
- .init_late = msm8960_init_late,
-MACHINE_END
-
+++ /dev/null
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
- struct meminfo *mi)
-{
- for (; tag->hdr.size; tag = tag_next(tag))
- if (tag->hdr.tag == ATAG_MEM &&
- tag->u.mem.start == 0x40200000) {
- tag->u.mem.start = 0x40000000;
- tag->u.mem.size += SZ_2M;
- }
-}
-
-static void __init msm8x60_reserve(void)
-{
- memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8x60_map_io(void)
-{
- msm_map_msm8x60_io();
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
- { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
- {}
-};
-#endif
-
-static void __init msm8x60_init_irq(void)
-{
- if (!of_have_populated_dt())
- gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
- (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
- else
- of_irq_init(msm_dt_gic_match);
-#endif
-
- /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
- writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
- /* RUMI does not adhere to GIC spec by enabling STIs by default.
- * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
- */
- if (!machine_is_msm8x60_sim())
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-
-static void __init msm8x60_init(void)
-{
-}
-
-static void __init msm8x60_init_late(void)
-{
- smd_debugfs_init();
-}
-
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
- {}
-};
-
-static void __init msm8x60_dt_init(void)
-{
- if (of_machine_is_compatible("qcom,msm8660-surf")) {
- printk(KERN_INFO "Init surf UART registers\n");
- msm8x60_init_uart12dm();
- }
-
- of_platform_populate(NULL, of_default_bus_match_table,
- msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- NULL
-};
-#endif /* CONFIG_OF */
-
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .init_machine = msm8x60_dt_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
- .dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &msm_timer,
+ .timer = &qsd8x50_timer,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &msm_timer,
+ .timer = &qsd8x50_timer,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/system.h>
#include <mach/vreg.h>
#include <mach/board.h>
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include <asm/mach-types.h>
#include <asm/system_info.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
#include "devices.h"
#include "board-trout.h"
+#include "common.h"
extern int trout_init_mmc(unsigned int);
&msm_device_i2c,
};
-extern struct sys_timer msm_timer;
-
static void __init trout_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
.init_irq = trout_init_irq,
.init_machine = trout_init,
.init_late = trout_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x01_timer,
MACHINE_END
/*
* glue for the proc_comm interface
*/
-int pc_clk_enable(unsigned id)
+static int pc_clk_enable(unsigned id)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
if (rc < 0)
return (int)id < 0 ? -EINVAL : 0;
}
-void pc_clk_disable(unsigned id)
+static void pc_clk_disable(unsigned id)
{
msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
}
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_rate(unsigned id, unsigned rate)
+static int pc_clk_set_rate(unsigned id, unsigned rate)
{
/* The rate _might_ be rounded off to the nearest KHz value by the
* remote function. So a return value of 0 doesn't necessarily mean
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_min_rate(unsigned id, unsigned rate)
+static int pc_clk_set_min_rate(unsigned id, unsigned rate)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
if (rc < 0)
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_max_rate(unsigned id, unsigned rate)
+static int pc_clk_set_max_rate(unsigned id, unsigned rate)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
if (rc < 0)
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_flags(unsigned id, unsigned flags)
+static int pc_clk_set_flags(unsigned id, unsigned flags)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
if (rc < 0)
return (int)id < 0 ? -EINVAL : 0;
}
-unsigned pc_clk_get_rate(unsigned id)
+static unsigned pc_clk_get_rate(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
return 0;
return id;
}
-unsigned pc_clk_is_enabled(unsigned id)
+static unsigned pc_clk_is_enabled(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
return 0;
return id;
}
-long pc_clk_round_rate(unsigned id, unsigned rate)
+static long pc_clk_round_rate(unsigned id, unsigned rate)
{
/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
--- /dev/null
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_COMMON_H
+#define __MACH_COMMON_H
+
+extern struct sys_timer msm7x01_timer;
+extern struct sys_timer msm7x30_timer;
+extern struct sys_timer msm_dt_timer;
+extern struct sys_timer qsd8x50_timer;
+
+extern void msm_map_common_io(void);
+extern void msm_map_msm7x30_io(void);
+extern void msm_map_msm8x60_io(void);
+extern void msm_map_msm8960_io(void);
+extern void msm_map_qsd8x50_io(void);
+
+extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+ unsigned int mtype, void *caller);
+
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
+
+#endif
--- /dev/null
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
#include "clock.h"
#include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart1[] = {
{
#include "clock-pcom.h"
#include "clock-7x30.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart2[] = {
{
+++ /dev/null
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#define MSM_GSBI2_PHYS 0x16100000
-#define MSM_UART2DM_PHYS (MSM_GSBI2_PHYS + 0x40000)
-
-#define MSM_GSBI5_PHYS 0x16400000
-#define MSM_UART5DM_PHYS (MSM_GSBI5_PHYS + 0x40000)
-
-static struct resource resources_uart_gsbi2[] = {
- {
- .start = GSBI2_UARTDM_IRQ,
- .end = GSBI2_UARTDM_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART2DM_PHYS,
- .end = MSM_UART2DM_PHYS + PAGE_SIZE - 1,
- .name = "uart_resource",
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MSM_GSBI2_PHYS,
- .end = MSM_GSBI2_PHYS + PAGE_SIZE - 1,
- .name = "gsbi_resource",
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device msm8960_device_uart_gsbi2 = {
- .name = "msm_serial",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_uart_gsbi2),
- .resource = resources_uart_gsbi2,
-};
-
-static struct resource resources_uart_gsbi5[] = {
- {
- .start = GSBI5_UARTDM_IRQ,
- .end = GSBI5_UARTDM_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART5DM_PHYS,
- .end = MSM_UART5DM_PHYS + PAGE_SIZE - 1,
- .name = "uart_resource",
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MSM_GSBI5_PHYS,
- .end = MSM_GSBI5_PHYS + PAGE_SIZE - 1,
- .name = "gsbi_resource",
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device msm8960_device_uart_gsbi5 = {
- .name = "msm_serial",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_uart_gsbi5),
- .resource = resources_uart_gsbi5,
-};
#include <asm/mach/flash.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "clock-pcom.h"
static struct resource resources_uart3[] = {
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
- list_del(&cmd->list);
- list_add_tail(&cmd->list, &active_commands[id]);
+ list_move_tail(&cmd->list, &active_commands[id]);
if (cmd->execute_func)
cmd->execute_func(cmd);
PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref msm_cpu_die(unsigned int cpu)
{
/*
* we're ready for shutdown now, so do it
*/
cpu_leave_lowpower();
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/* arch/arm/mach-msm/idle.c
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-
-static void msm_idle(void)
-{
-#ifdef CONFIG_MSM7X00A_IDLE
- asm volatile (
-
- "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
- "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
- "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
- "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
-
- "mov r0, #0 /* prepare wfi value */ \n\t"
- "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
- "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
- "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
-
- "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
-
- : : : "r0","r1" );
-#endif
-}
-
-static int __init msm_idle_init(void)
-{
- arm_pm_idle = msm_idle;
- return 0;
-}
-
-arch_initcall(msm_idle_init);
#define __ASM_ARCH_MSM_BOARD_H
#include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
/* platform device data structures */
-struct msm_acpu_clock_platform_data
-{
- uint32_t acpu_switch_time_us;
- uint32_t max_speed_delta_khz;
- uint32_t vdd_switch_time_us;
- unsigned long power_collapse_khz;
- unsigned long wait_for_irq_khz;
-};
-
struct clk_lookup;
-extern struct sys_timer msm_timer;
-
/* common init routines for use by arch/arm/mach-msm/board-*.c */
void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
void __init msm_init_irq(void);
void __init msm_init_gpio(void);
void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
int __init msm_add_sdcc(unsigned int controller,
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags);
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct msm_mmc_gpio {
- unsigned no;
- const char *name;
-};
-
-struct msm_mmc_gpio_data {
- struct msm_mmc_gpio *gpio;
- u8 size;
-};
-
-struct msm_mmc_platform_data {
- unsigned int ocr_mask; /* available voltages */
- u32 (*translate_vdd)(struct device *, unsigned int);
- unsigned int (*status)(struct device *);
- int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
- struct msm_mmc_gpio_data *gpio_data;
- void (*init_card)(struct mmc_card *card);
-};
-
-#endif
+++ /dev/null
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
- * Internal shared definitions for various MSM framebuffer parts.
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MSM_FB_H_
-#define _MSM_FB_H_
-
-#include <linux/device.h>
-
-struct mddi_info;
-
-struct msm_fb_data {
- int xres; /* x resolution in pixels */
- int yres; /* y resolution in pixels */
- int width; /* disply width in mm */
- int height; /* display height in mm */
- unsigned output_format;
-};
-
-struct msmfb_callback {
- void (*func)(struct msmfb_callback *);
-};
-
-enum {
- MSM_MDDI_PMDH_INTERFACE,
- MSM_MDDI_EMDH_INTERFACE,
- MSM_EBI2_INTERFACE,
-};
-
-#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0)
-
-struct msm_panel_data {
- /* turns off the fb memory */
- int (*suspend)(struct msm_panel_data *);
- /* turns on the fb memory */
- int (*resume)(struct msm_panel_data *);
- /* turns off the panel */
- int (*blank)(struct msm_panel_data *);
- /* turns on the panel */
- int (*unblank)(struct msm_panel_data *);
- void (*wait_vsync)(struct msm_panel_data *);
- void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
- void (*clear_vsync)(struct msm_panel_data *);
- /* from the enum above */
- unsigned interface_type;
- /* data to be passed to the fb driver */
- struct msm_fb_data *fb_data;
-
- /* capabilities supported by the panel */
- uint32_t caps;
-};
-
-struct msm_mddi_client_data {
- void (*suspend)(struct msm_mddi_client_data *);
- void (*resume)(struct msm_mddi_client_data *);
- void (*activate_link)(struct msm_mddi_client_data *);
- void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
- uint32_t reg);
- uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
- void (*auto_hibernate)(struct msm_mddi_client_data *, int);
- /* custom data that needs to be passed from the board file to a
- * particular client */
- void *private_client_data;
- struct resource *fb_resource;
- /* from the list above */
- unsigned interface_type;
-};
-
-struct msm_mddi_platform_data {
- unsigned int clk_rate;
- void (*power_client)(struct msm_mddi_client_data *, int on);
-
- /* fixup the mfr name, product id */
- void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
-
- struct resource *fb_resource; /*optional*/
- /* number of clients in the list that follows */
- int num_clients;
- /* array of client information of clients */
- struct {
- unsigned product_id; /* mfr id in top 16 bits, product id
- * in lower 16 bits
- */
- char *name; /* the device name will be the platform
- * device name registered for the client,
- * it should match the name of the associated
- * driver
- */
- unsigned id; /* id for mddi client device node, will also
- * be used as device id of panel devices, if
- * the client device will have multiple panels
- * space must be left here for them
- */
- void *client_data; /* required private client data */
- unsigned int clk_rate; /* optional: if the client requires a
- * different mddi clk rate
- */
- } client_platform_data[];
-};
-
-struct mdp_blit_req;
-struct fb_info;
-struct mdp_device {
- struct device dev;
- void (*dma)(struct mdp_device *mpd, uint32_t addr,
- uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
- uint32_t y, struct msmfb_callback *callback, int interface);
- void (*dma_wait)(struct mdp_device *mdp);
- int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
- struct mdp_blit_req *req);
- void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
-};
-
-struct class_interface;
-int register_mdp_client(struct class_interface *class_intf);
-
-/**** private client data structs go below this line ***/
-
-struct msm_mddi_bridge_platform_data {
- /* from board file */
- int (*init)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- int (*uninit)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- /* passed to panel for use by the fb driver */
- int (*blank)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- int (*unblank)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- struct msm_fb_data fb_data;
-};
-
-
-
-#endif
#define MSM_AD5_PHYS 0xAC000000
#define MSM_AD5_SIZE (SZ_1M*13)
-#ifndef __ASSEMBLY__
-
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
- unsigned int mtype, void *caller);
-
-#endif
-
#endif
#define MSM_HSUSB_PHYS 0xA3600000
#define MSM_HSUSB_SIZE SZ_1K
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
-
#endif
#define MSM8960_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x16440000
#endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
-
#endif
#define MSM_SDC4_PHYS 0xA0600000
#define MSM_SDC4_SIZE SZ_4K
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
-
#endif
#define MSM8X60_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x19C40000
#endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
-
#endif
+++ /dev/null
-/* arch/arm/mach-msm/include/mach/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* low level hardware reset hook -- for example, hitting the
- * PSHOLD line on the PMIC to hard reset the system
- */
-extern void (*msm_hw_reset_hook)(void);
#include <mach/board.h>
-#define MSM_CHIP_DEVICE(name, chip) { \
+#include "common.h"
+
+#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \
.virtual = (unsigned long) MSM_##name##_BASE, \
.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
.length = chip##_##name##_SIZE, \
- .type = MT_DEVICE_NONSHARED, \
+ .type = mem_type, \
}
+#define MSM_DEVICE_TYPE(name, mem_type) \
+ MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
+#define MSM_CHIP_DEVICE(name, chip) \
+ MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
- || defined(CONFIG_ARCH_MSM7X25)
+#if defined(CONFIG_ARCH_MSM7X00A)
static struct map_desc msm_io_desc[] __initdata = {
- MSM_DEVICE(VIC),
- MSM_CHIP_DEVICE(CSR, MSM7X00),
- MSM_DEVICE(DMOV),
- MSM_CHIP_DEVICE(GPIO1, MSM7X00),
- MSM_CHIP_DEVICE(GPIO2, MSM7X00),
- MSM_DEVICE(CLK_CTL),
+ MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
- MSM_DEVICE(DEBUG_UART),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
- MSM_DEVICE(GCC),
+ MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
#endif
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
-#include <mach/msm_iomap.h>
-
#include "scm-boot.h"
+#include "common.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
-
extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit msm_secondary_init(unsigned int cpu)
{
- /* Configure edge-triggered PPIs */
- writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
"address\n");
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
static int cold_boot_done;
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-void __init smp_init_cpus(void)
+static void __init msm_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
}
+
+struct smp_operations msm_smp_ops __initdata = {
+ .smp_init_cpus = msm_smp_init_cpus,
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/msm_iomap.h>
-#include <mach/system.h>
#include "proc_comm.h"
#include <linux/delay.h>
#include <mach/msm_smd.h>
-#include <mach/system.h>
#include "smd_private.h"
#include "proc_comm.h"
#define CONFIG_QDSP6 1
#endif
-void (*msm_hw_reset_hook)(void);
-
#define MODULE_NAME "msm_smd"
enum {
struct shared_info {
int ready;
- unsigned state;
+ void __iomem *state;
};
static unsigned dummy_state[SMSM_STATE_COUNT];
static struct shared_info smd_info = {
- .state = (unsigned) &dummy_state,
+ /* FIXME: not a real __iomem pointer */
+ .state = &dummy_state,
};
module_param_named(debug_mask, msm_smd_debug_mask,
pr_err("ARM9 has CRASHED\n");
smd_diag();
- /* hard reboot if possible */
- if (msm_hw_reset_hook)
- msm_hw_reset_hook();
-
/* in this case the modem or watchdog should reboot us */
for (;;)
;
return smem_find(id, size);
}
-void *smem_item(unsigned id, unsigned *size)
+void __iomem *smem_item(unsigned id, unsigned *size)
{
struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
struct smem_heap_entry *toc = shared->heap_toc;
if (id >= SMEM_NUM_ITEMS)
- return 0;
+ return NULL;
if (toc[id].allocated) {
*size = toc[id].size;
- return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
+ return (MSM_SHARED_RAM_BASE + toc[id].offset);
} else {
*size = 0;
}
- return 0;
+ return NULL;
}
void *smem_find(unsigned id, unsigned size_in)
int smsm_change_state(enum smsm_state_item item,
uint32_t clear_mask, uint32_t set_mask)
{
- unsigned long addr = smd_info.state + item * 4;
+ void __iomem *addr = smd_info.state + item * 4;
unsigned long flags;
unsigned state;
/* wait for essential items to be initialized */
for (;;) {
unsigned size;
- void *state;
+ void __iomem *state;
state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
- smd_info.state = (unsigned)state;
+ smd_info.state = state;
break;
}
}
/*
*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
-#include <mach/msm_iomap.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
+#include "common.h"
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0004
#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
#define TIMER_ENABLE_EN BIT(0)
#define TIMER_CLEAR 0x000C
-#define DGT_CLK_CTL 0x0034
#define DGT_CLK_CTL_DIV_4 0x3
#define GPT_HZ 32768
static union {
struct clock_event_device *evt;
- struct clock_event_device __percpu **percpu_evt;
+ struct clock_event_device * __percpu *percpu_evt;
} msm_evt;
static void __iomem *source_base;
*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
clockevents_register_device(evt);
- enable_percpu_irq(evt->irq, 0);
+ enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
return 0;
}
return msm_clocksource.read(&msm_clocksource);
}
-static void __init msm_timer_init(void)
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+ bool percpu)
{
struct clock_event_device *ce = &msm_clockevent;
struct clocksource *cs = &msm_clocksource;
int res;
- u32 dgt_hz;
-
- if (cpu_is_msm7x01()) {
- event_base = MSM_CSR_BASE;
- source_base = MSM_CSR_BASE + 0x10;
- dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
- cs->read = msm_read_timer_count_shift;
- cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
- } else if (cpu_is_msm7x30()) {
- event_base = MSM_CSR_BASE + 0x04;
- source_base = MSM_CSR_BASE + 0x24;
- dgt_hz = 24576000 / 4;
- } else if (cpu_is_qsd8x50()) {
- event_base = MSM_CSR_BASE;
- source_base = MSM_CSR_BASE + 0x10;
- dgt_hz = 19200000 / 4;
- } else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
- event_base = MSM_TMR_BASE + 0x04;
- /* Use CPU0's timer as the global clock source. */
- source_base = MSM_TMR0_BASE + 0x24;
- dgt_hz = 27000000 / 4;
- writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- } else
- BUG();
writel_relaxed(0, event_base + TIMER_ENABLE);
writel_relaxed(0, event_base + TIMER_CLEAR);
writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
ce->cpumask = cpumask_of(0);
+ ce->irq = irq;
- ce->irq = INT_GP_TIMER_EXP;
clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
- if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ if (percpu) {
msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
if (!msm_evt.percpu_evt) {
pr_err("memory allocation failed for %s\n", ce->name);
res = request_percpu_irq(ce->irq, msm_timer_interrupt,
ce->name, msm_evt.percpu_evt);
if (!res) {
- enable_percpu_irq(ce->irq, 0);
+ enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
#ifdef CONFIG_LOCAL_TIMERS
local_timer_register(&msm_local_timer_ops);
#endif
res = clocksource_register_hz(cs, dgt_hz);
if (res)
pr_err("clocksource_register failed\n");
- setup_sched_clock(msm_sched_clock_read,
- cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
+ setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
}
-struct sys_timer msm_timer = {
- .init = msm_timer_init
+#ifdef CONFIG_OF
+static const struct of_device_id msm_dgt_match[] __initconst = {
+ { .compatible = "qcom,msm-dgt" },
+ { },
+};
+
+static const struct of_device_id msm_gpt_match[] __initconst = {
+ { .compatible = "qcom,msm-gpt" },
+ { },
+};
+
+static void __init msm_dt_timer_init(void)
+{
+ struct device_node *np;
+ u32 freq;
+ int irq;
+ struct resource res;
+ u32 percpu_offset;
+ void __iomem *dgt_clk_ctl;
+
+ np = of_find_matching_node(NULL, msm_gpt_match);
+ if (!np) {
+ pr_err("Can't find GPT DT node\n");
+ return;
+ }
+
+ event_base = of_iomap(np, 0);
+ if (!event_base) {
+ pr_err("Failed to map event base\n");
+ return;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("Can't get irq\n");
+ return;
+ }
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, msm_dgt_match);
+ if (!np) {
+ pr_err("Can't find DGT DT node\n");
+ return;
+ }
+
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("Failed to parse DGT resource\n");
+ return;
+ }
+
+ source_base = ioremap(res.start + percpu_offset, resource_size(&res));
+ if (!source_base) {
+ pr_err("Failed to map source base\n");
+ return;
+ }
+
+ if (!of_address_to_resource(np, 1, &res)) {
+ dgt_clk_ctl = ioremap(res.start + percpu_offset,
+ resource_size(&res));
+ if (!dgt_clk_ctl) {
+ pr_err("Failed to map DGT control base\n");
+ return;
+ }
+ writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
+ iounmap(dgt_clk_ctl);
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ pr_err("Unknown frequency\n");
+ return;
+ }
+ of_node_put(np);
+
+ msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+
+struct sys_timer msm_dt_timer = {
+ .init = msm_dt_timer_init
+};
+#endif
+
+static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+{
+ event_base = ioremap(event, SZ_64);
+ if (!event_base) {
+ pr_err("Failed to map event base\n");
+ return 1;
+ }
+ source_base = ioremap(source, SZ_64);
+ if (!source_base) {
+ pr_err("Failed to map source base\n");
+ return 1;
+ }
+ return 0;
+}
+
+static void __init msm7x01_timer_init(void)
+{
+ struct clocksource *cs = &msm_clocksource;
+
+ if (msm_timer_map(0xc0100000, 0xc0100010))
+ return;
+ cs->read = msm_read_timer_count_shift;
+ cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+ /* 600 KHz */
+ msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+ false);
+}
+
+struct sys_timer msm7x01_timer = {
+ .init = msm7x01_timer_init
+};
+
+static void __init msm7x30_timer_init(void)
+{
+ if (msm_timer_map(0xc0100004, 0xc0100024))
+ return;
+ msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+struct sys_timer msm7x30_timer = {
+ .init = msm7x30_timer_init
+};
+
+static void __init qsd8x50_timer_init(void)
+{
+ if (msm_timer_map(0xAC100000, 0xAC100010))
+ return;
+ msm_timer_init(19200000 / 4, 32, 7, false);
+}
+
+struct sys_timer qsd8x50_timer = {
+ .init = qsd8x50_timer_init
};
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
#include "common.h"
/*
int maj, int min)
{
orion_setup_cpu_win(&addr_map_cfg, window, base, size,
- TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
+ TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
.pfn = 0,
.length = MV78XX0_CORE_REGS_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0),
- .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
- .length = MV78XX0_PCIE_IO_SIZE * 8,
- .type = MT_DEVICE,
}, {
.virtual = MV78XX0_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
+++ /dev/null
-/*
- * arch/arm/mach-mv78xx0/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
- + MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a) __io(a)
-
-#endif
*
* virt phys size
* fe400000 f102x000 16K core-specific peripheral registers
- * fe700000 f0800000 1M PCIe #0 I/O space
- * fe800000 f0900000 1M PCIe #1 I/O space
- * fe900000 f0a00000 1M PCIe #2 I/O space
- * fea00000 f0b00000 1M PCIe #3 I/O space
- * feb00000 f0c00000 1M PCIe #4 I/O space
- * fec00000 f0d00000 1M PCIe #5 I/O space
- * fed00000 f0e00000 1M PCIe #6 I/O space
- * fee00000 f0f00000 1M PCIe #7 I/O space
- * fef00000 f1000000 1M on-chip peripheral registers
+ * fee00000 f0800000 64K PCIe #0 I/O space
+ * fee10000 f0900000 64K PCIe #1 I/O space
+ * fee20000 f0a00000 64K PCIe #2 I/O space
+ * fee30000 f0b00000 64K PCIe #3 I/O space
+ * fee40000 f0c00000 64K PCIe #4 I/O space
+ * fee50000 f0d00000 64K PCIe #5 I/O space
+ * fee60000 f0e00000 64K PCIe #6 I/O space
+ * fee70000 f0f00000 64K PCIe #7 I/O space
+ * fd000000 f1000000 1M on-chip peripheral registers
*/
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
#define MV78XX0_PCIE_IO_SIZE SZ_1M
#define MV78XX0_REGS_PHYS_BASE 0xf1000000
-#define MV78XX0_REGS_VIRT_BASE 0xfef00000
+#define MV78XX0_REGS_VIRT_BASE 0xfd000000
#define MV78XX0_REGS_SIZE SZ_1M
#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "common.h"
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
#include "common.h"
struct pcie_port {
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
- char io_space_name[16];
char mem_space_name[16];
- struct resource res[2];
+ struct resource res;
};
static struct pcie_port pcie_port[8];
static int num_pcie_ports;
static struct resource pcie_io_space;
-static struct resource pcie_mem_space;
-
void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
{
*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
}
+u32 pcie_port_size[8] = {
+ 0,
+ 0x30000000,
+ 0x10000000,
+ 0x10000000,
+ 0x08000000,
+ 0x08000000,
+ 0x08000000,
+ 0x04000000,
+};
+
static void __init mv78xx0_pcie_preinit(void)
{
int i;
u32 size_each;
u32 start;
- int win;
+ int win = 0;
pcie_io_space.name = "PCIe I/O Space";
pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
pcie_io_space.end =
MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
- pcie_io_space.flags = IORESOURCE_IO;
+ pcie_io_space.flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pcie_io_space))
panic("can't allocate PCIe I/O space");
- pcie_mem_space.name = "PCIe MEM Space";
- pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
- pcie_mem_space.end =
- MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
- pcie_mem_space.flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pcie_mem_space))
- panic("can't allocate PCIe MEM space");
+ if (num_pcie_ports > 7)
+ panic("invalid number of PCIe ports");
+
+ size_each = pcie_port_size[num_pcie_ports];
+ start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d.%d I/O", pp->maj, pp->min);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
- pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d.%d MEM", pp->maj, pp->min);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
- pp->res[1].flags = IORESOURCE_MEM;
- }
-
- switch (num_pcie_ports) {
- case 0:
- size_each = 0;
- break;
-
- case 1:
- size_each = 0x30000000;
- break;
-
- case 2 ... 3:
- size_each = 0x10000000;
- break;
-
- case 4 ... 6:
- size_each = 0x08000000;
- break;
-
- case 7:
- size_each = 0x04000000;
- break;
-
- default:
- panic("invalid number of PCIe ports");
- }
-
- start = MV78XX0_PCIE_MEM_PHYS_BASE;
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
-
- pp->res[1].start = start;
- pp->res[1].end = start + size_each - 1;
+ pp->res.name = pp->mem_space_name;
+ pp->res.flags = IORESOURCE_MEM;
+ pp->res.start = start;
+ pp->res.end = start + size_each - 1;
start += size_each;
- }
-
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
- if (request_resource(&pcie_io_space, &pp->res[0]))
- panic("can't allocate PCIe I/O sub-space");
-
- if (request_resource(&pcie_mem_space, &pp->res[1]))
+ if (request_resource(&iomem_resource, &pp->res))
panic("can't allocate PCIe MEM sub-space");
- }
- win = 0;
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
+ mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
+ resource_size(&pp->res),
+ pp->maj, pp->min);
- mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
- resource_size(&pp->res[0]),
+ mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
pp->maj, pp->min);
-
- mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
- resource_size(&pp->res[1]),
- pp->maj, pp->min);
}
}
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base);
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
return 1;
}
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
- memset(pp->res, 0, sizeof(pp->res));
+ memset(&pp->res, 0, sizeof(pp->res));
} else {
printk("link down, ignoring\n");
}
+config ARCH_MVEBU
+ bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
if ARCH_MVEBU
menu "Marvell SOC with device tree"
+ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+++ /dev/null
-zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/armada-370-xp.h>
+#include "armada-370-xp.h"
#include "common.h"
static struct map_desc armada_370_xp_io_desc[] __initdata = {
--- /dev/null
+/*
+ * Generic definitions for Marvell Armada_370_XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_ARMADA_370_XP_H
+#define __MACH_ARMADA_370_XP_H
+
+#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+#define ARMADA_370_XP_REGS_SIZE SZ_1M
+
+#endif /* __MACH_ARMADA_370_XP_H */
+++ /dev/null
-/*
- * Generic definitions for Marvell Armada_370_XP SoCs
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_ARMADA_370_XP_H
-#define __MACH_ARMADA_370_XP_H
-
-#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
-#define ARMADA_370_XP_REGS_SIZE SZ_1M
-
-#endif /* __MACH_ARMADA_370_XP_H */
+++ /dev/null
-/*
- * Early serial output macro for Marvell SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/armada-370-xp.h>
-
- .macro addruart, rp, rv, tmp
- ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
- ldr \rv, =ARMADA_370_XP_REGS_VIRT_BASE
- orr \rp, \rp, #0x00012000
- orr \rv, \rv, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * Marvell Armada SoC time definitions
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
+++ /dev/null
-/*
- * Marvell Armada SoC kernel uncompression UART routines
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/armada-370-xp.h>
-
-#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12000))
-#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12014))
-
-#define LSR_THRE 0x20
-
-static void putc(const char c)
-{
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- /* Transmit fifo not full? */
- if (*UART_LSR & LSR_THRE)
- break;
- }
-
- *UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
if ARCH_MXS
-source "arch/arm/mach-mxs/devices/Kconfig"
-
config SOC_IMX23
bool
select ARM_AMBA
Include support for Freescale MXS platforms(i.MX23 and i.MX28)
using the device tree for discovery
-config MACH_STMP378X_DEVB
- bool "Support STMP378x_devb Platform"
- select SOC_IMX23
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for STMP378x-devb platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX23EVK
- bool "Support MX23EVK Platform"
- select SOC_IMX23
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for MX23EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX28EVK
- bool "Support MX28EVK Platform"
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_FLEXCAN
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
- select MXS_HAVE_PLATFORM_MXS_SAIF
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for MX28EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MODULE_TX28
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXS_PWM
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_FLEXCAN
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
-
-config MODULE_APX4
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXS_SAIF
-
-config MACH_TX28
- bool "Ka-Ro TX28 module"
- select MODULE_TX28
-
-config MACH_M28EVK
- bool "Support DENX M28EVK Platform"
- select MODULE_M28
-
-config MACH_APX4DEVKIT
- bool "Support Bluegiga APX4 Development Kit"
- select MODULE_APX4
-
endif
# Common support
-obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o timer.o mm.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28) += mach-tx28.o
-
-obj-y += devices/
zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
- imx23-olinuxino.dtb \
- imx23-stmp378x_devb.dtb \
- imx28-apx4devkit.dtb \
- imx28-cfa10036.dtb \
- imx28-evk.dtb \
- imx28-m28evk.dtb \
- imx28-tx28.dtb \
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx23_add_duart(void)
-{
- struct amba_device *d;
-
- d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
- MX23_INT_DUART, 0, 0, 0);
- return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0() mx23_add_auart(0)
-#define mx23_add_auart1() mx23_add_auart(1)
-
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata) \
- mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
- mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-
-#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx23_add_mxsfb(
- const struct mxsfb_platform_data *pdata);
-
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx28_add_duart(void)
-{
- struct amba_device *d;
-
- d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
- MX28_INT_DUART, 0, 0, 0);
- return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0() mx28_add_auart(0)
-#define mx28_add_auart1() mx28_add_auart(1)
-#define mx28_add_auart2() mx28_add_auart(2)
-#define mx28_add_auart3() mx28_add_auart(3)
-#define mx28_add_auart4() mx28_add_auart(4)
-
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
- mxs_add_fec(&mx28_fec_data[id], pdata)
-
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata) \
- mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
-
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata) \
- mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
- mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-
-#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx28_add_mxsfb(
- const struct mxsfb_platform_data *pdata);
-
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
- mxs_add_saif(&mx28_saif_data[id], pdata)
-
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
+++ /dev/null
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-struct platform_device *__init mxs_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev;
-
- pdev = platform_device_alloc(name, id);
- if (!pdev)
- goto err;
-
- if (dmamask) {
- /*
- * This memory isn't freed when the device is put,
- * I don't have a nice idea for that though. Conceptually
- * dma_mask in struct device should not be a pointer.
- * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
- */
- pdev->dev.dma_mask =
- kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask)
- /* ret is still -ENOMEM; */
- goto err;
-
- *pdev->dev.dma_mask = dmamask;
- pdev->dev.coherent_dma_mask = dmamask;
- }
-
- if (res) {
- ret = platform_device_add_resources(pdev, res, num_resources);
- if (ret)
- goto err;
- }
-
- if (data) {
- ret = platform_device_add_data(pdev, data, size_data);
- if (ret)
- goto err;
- }
-
- ret = platform_device_add(pdev);
- if (ret) {
-err:
- if (dmamask)
- kfree(pdev->dev.dma_mask);
- platform_device_put(pdev);
- return ERR_PTR(ret);
- }
-
- return pdev;
-}
-
-struct device mxs_apbh_bus = {
- .init_name = "mxs_apbh",
- .parent = &platform_bus,
-};
-
-static int __init mxs_device_init(void)
-{
- return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
+++ /dev/null
-config MXS_HAVE_AMBA_DUART
- bool
-
-config MXS_HAVE_PLATFORM_AUART
- bool
-
-config MXS_HAVE_PLATFORM_FEC
- bool
-
-config MXS_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN if CAN
- bool
-
-config MXS_HAVE_PLATFORM_GPMI_NAND
- bool
-
-config MXS_HAVE_PLATFORM_MXS_I2C
- bool
-
-config MXS_HAVE_PLATFORM_MXS_MMC
- bool
-
-config MXS_HAVE_PLATFORM_MXS_PWM
- bool
-
-config MXS_HAVE_PLATFORM_MXSFB
- bool
-
-config MXS_HAVE_PLATFORM_MXS_SAIF
- bool
-
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
- bool
+++ /dev/null
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_auart_data_entry_single(soc, _id, hwid) \
- { \
- .id = _id, \
- .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_AUART ## hwid, \
- }
-
-#define mxs_auart_data_entry(soc, _id, hwid) \
- [_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid) \
- mxs_auart_data_entry(MX23, _id, hwid)
- mx23_auart_data_entry(0, 1),
- mx23_auart_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id) \
- mxs_auart_data_entry(MX28, _id, _id)
- mx28_auart_data_entry(0),
- mx28_auart_data_entry(1),
- mx28_auart_data_entry(2),
- mx28_auart_data_entry(3),
- mx28_auart_data_entry(4),
-};
-#endif
-
-struct platform_device *__init mxs_add_auart(
- const struct mxs_auart_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device_dmamask("mxs-auart", data->id,
- res, ARRAY_SIZE(res), NULL, 0,
- DMA_BIT_MASK(32));
-}
-
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_dma(const char *devid,
- resource_size_t base)
-{
- struct resource res[] = {
- {
- .start = base,
- .end = base + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }
- };
-
- return mxs_add_platform_device_dmamask(devid, -1,
- res, ARRAY_SIZE(res), NULL, 0,
- DMA_BIT_MASK(32));
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_fec_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \
- .irq = soc ## _INT_ENET_MAC ## _id, \
- }
-
-#define mxs_fec_data_entry(soc, _id) \
- [_id] = mxs_fec_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id) \
- mxs_fec_data_entry(MX28, _id)
- mx28_fec_data_entry(0),
- mx28_fec_data_entry(1),
-};
-#endif
-
-struct platform_device *__init mxs_add_fec(
- const struct mxs_fec_data *data,
- const struct fec_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx28-fec", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
+++ /dev/null
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- * Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CAN ## _hwid, \
- }
-
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \
- [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid) \
- mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
- mx28_flexcan_data_entry(0, 0),
- mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-
-struct platform_device *__init mxs_add_flexcan(
- const struct mxs_flexcan_data *data,
- const struct flexcan_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("flexcan", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_gpio(
- char *name, int id, resource_size_t iobase, int irq)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxs_apbh_bus,
- name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
- .devid = "imx23-gpmi-nand",
- .res = {
- /* GPMI */
- DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
- GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
- GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
- /* BCH */
- DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
- GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
- GPMI_NAND_BCH_INTERRUPT_RES_NAME),
- /* DMA */
- DEFINE_RES_NAMED(MX23_DMA_GPMI0,
- MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
- GPMI_NAND_DMA_CHANNELS_RES_NAME,
- IORESOURCE_DMA),
- DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
- GPMI_NAND_DMA_INTERRUPT_RES_NAME),
- },
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
- .devid = "imx28-gpmi-nand",
- .res = {
- /* GPMI */
- DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
- GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
- GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
- /* BCH */
- DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
- GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
- GPMI_NAND_BCH_INTERRUPT_RES_NAME),
- /* DMA */
- DEFINE_RES_NAMED(MX28_DMA_GPMI0,
- MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
- GPMI_NAND_DMA_CHANNELS_RES_NAME,
- IORESOURCE_DMA),
- DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
- GPMI_NAND_DMA_INTERRUPT_RES_NAME),
- },
-};
-#endif
-
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
- const struct mxs_gpmi_nand_data *data)
-{
- return mxs_add_platform_device_dmamask(data->devid, -1,
- data->res, GPMI_NAND_RES_SIZE,
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_i2c_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \
- .errirq = soc ## _INT_I2C ## _id ## _ERROR, \
- .dmairq = soc ## _INT_I2C ## _id ## _DMA, \
- }
-
-#define mxs_i2c_data_entry(soc, _id) \
- [_id] = mxs_i2c_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
- mxs_i2c_data_entry(MX28, 0),
- mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_i2c(
- const struct mxs_mxs_i2c_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->errirq,
- .end = data->errirq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dmairq,
- .end = data->dmairq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("mxs-i2c", data->id, res,
- ARRAY_SIZE(res), NULL, 0);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
- .dma = soc ## _DMA_SSP ## hwid, \
- .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
- .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
- }
-
-#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \
- [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
-
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
- mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_mmc(
- const struct mxs_mxs_mmc_data *data,
- const struct mxs_mmc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->dma,
- .end = data->dma,
- .flags = IORESOURCE_DMA,
- }, {
- .start = data->irq_err,
- .end = data->irq_err,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq_dma,
- .end = data->irq_dma,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
- struct resource res = {
- .flags = IORESOURCE_MEM,
- };
-
- res.start = iobase + 0x10 + 0x20 * id;
- res.end = res.start + 0x1f;
-
- return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_saif_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \
- .irq = soc ## _INT_SAIF ## _id, \
- .dma = soc ## _DMA_SAIF ## _id, \
- .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \
- }
-
-#define mxs_saif_data_entry(soc, _id) \
- [_id] = mxs_saif_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
- mxs_saif_data_entry(MX28, 0),
- mxs_saif_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
- const struct mxs_saif_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dma,
- .end = data->dma,
- .flags = IORESOURCE_DMA,
- }, {
- .start = data->dmairq,
- .end = data->dmairq,
- .flags = IORESOURCE_IRQ,
- },
-
- };
-
- return mxs_add_platform_device("mxs-saif", data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
- const struct mxsfb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = MX23_LCDIF_BASE_ADDR,
- .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx23-fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
- const struct mxsfb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = MX28_LCDIF_BASE_ADDR,
- .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx28-fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
+++ /dev/null
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
- struct resource res[] = {
- {
- .start = MX23_RTC_BASE_ADDR,
- .end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX23_INT_RTC_ALARM,
- .end = MX23_INT_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
- NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
- struct resource res[] = {
- {
- .start = MX28_RTC_BASE_ADDR,
- .end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX28_INT_RTC_ALARM,
- .end = MX28_INT_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
- NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
extern void mxs_restart(char, const char *);
extern int mxs_saif_clkmux_select(unsigned int clkmux);
-extern void mx23_soc_init(void);
extern int mx23_clocks_init(void);
extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
-extern void mx28_soc_init(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
extern void icoll_init_irq(void);
-extern struct platform_device *mxs_add_dma(const char *devid,
- resource_size_t base);
-extern struct platform_device *mxs_add_gpio(char *name, int id,
- resource_size_t iobase, int irq);
-
#endif /* __MACH_MXS_COMMON_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-
-extern struct device mxs_apbh_bus;
-
-struct platform_device *mxs_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask);
-
-static inline struct platform_device *mxs_add_platform_device(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
-{
- return mxs_add_platform_device_dmamask(
- name, id, res, num_resources, data, size_data, 0);
-}
-
-/* auart */
-struct mxs_auart_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
- const struct mxs_auart_data *data);
-
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
- const struct mxs_fec_data *data,
- const struct fec_platform_data *pdata);
-
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
- const struct mxs_flexcan_data *data,
- const struct flexcan_platform_data *pdata);
-
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
- const char *devid;
- const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
- const struct mxs_gpmi_nand_data *data);
-
-/* i2c */
-struct mxs_mxs_i2c_data {
- int id;
- resource_size_t iobase;
- resource_size_t errirq;
- resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
- const struct mxs_mxs_i2c_data *data);
-
-/* mmc */
-#include <linux/mmc/mxs-mmc.h>
-struct mxs_mxs_mmc_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t dma;
- resource_size_t irq_err;
- resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
- const struct mxs_mxs_mmc_data *data,
- const struct mxs_mmc_platform_data *pdata);
-
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
- resource_size_t iobase, int id);
-
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
- resource_size_t dma;
- resource_size_t dmairq;
-};
-
-struct platform_device *__init mxs_add_saif(
- const struct mxs_saif_data *data,
- const struct mxs_saif_platform_data *pdata);
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- * BANK PIN MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- * BANK PIN MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-
-#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-
-#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-
-#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-
-#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-
-#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-
-#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX28_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK: 0..2 (3)
- * PAD_PIN: 3..7 (5)
- * PAD_MUXSEL: 8..9 (2)
- * PAD_MA: 10..11 (2)
- * PAD_MA_VALID: 12 (1)
- * PAD_VOL: 13 (1)
- * PAD_VOL_VALID: 14 (1)
- * PAD_PULL: 15 (1)
- * PAD_PULL_VALID: 16 (1)
- * RESERVED: 17..31 (15)
- */
-typedef u32 iomux_cfg_t;
-
-#define MXS_PAD_BANK_SHIFT 0
-#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT 3
-#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT 8
-#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT 10
-#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT 12
-#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT 13
-#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT 14
-#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT 15
-#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-
-#define PAD_MUXSEL_0 0
-#define PAD_MUXSEL_1 1
-#define PAD_MUXSEL_2 2
-#define PAD_MUXSEL_GPIO 3
-
-#define PAD_4MA 0
-#define PAD_8MA 1
-#define PAD_12MA 2
-#define PAD_16MA 3
-
-#define PAD_1V8 0
-#define PAD_3V3 1
-
-#define PAD_NOPULL 0
-#define PAD_PULLUP 1
-
-#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-
-#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
- MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
- MXS_PAD_VOL_VALID_MASK)
-
-#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
- MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
- MXS_PAD_PULL_VALID_MASK)
-
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
- (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
- ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
- ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
- ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
- ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
- ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
- MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-
-#endif /* __MACH_MXS_IOMUX_H__*/
+++ /dev/null
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
- u32 reg, ofs, bp, bm;
- void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-
- /* muxsel */
- ofs = 0x100;
- ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
- bp = PAD_PIN(pad) % 16 * 2;
- bm = 0x3 << bp;
- reg = __raw_readl(iomux_base + ofs);
- reg &= ~bm;
- reg |= PAD_MUXSEL(pad) << bp;
- __raw_writel(reg, iomux_base + ofs);
-
- /* drive */
- ofs = cpu_is_mx23() ? 0x200 : 0x300;
- ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
- /* mA */
- if (PAD_MA_VALID(pad)) {
- bp = PAD_PIN(pad) % 8 * 4;
- bm = 0x3 << bp;
- reg = __raw_readl(iomux_base + ofs);
- reg &= ~bm;
- reg |= PAD_MA(pad) << bp;
- __raw_writel(reg, iomux_base + ofs);
- }
- /* vol */
- if (PAD_VOL_VALID(pad)) {
- bp = PAD_PIN(pad) % 8 * 4 + 2;
- if (PAD_VOL(pad))
- __mxs_setl(1 << bp, iomux_base + ofs);
- else
- __mxs_clrl(1 << bp, iomux_base + ofs);
- }
-
- /* pull */
- if (PAD_PULL_VALID(pad)) {
- ofs = cpu_is_mx23() ? 0x400 : 0x600;
- ofs += PAD_BANK(pad) * 0x10;
- bp = PAD_PIN(pad);
- if (PAD_PULL(pad))
- __mxs_setl(1 << bp, iomux_base + ofs);
- else
- __mxs_clrl(1 << bp, iomux_base + ofs);
- }
-
- return 0;
-}
-
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
- const iomux_cfg_t *p = pad_list;
- int i;
- int ret;
-
- for (i = 0; i < count; i++) {
- ret = mxs_iomux_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
- /* duart */
- MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
- /* auart1 */
- MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
- /* auart2 */
- MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
- MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
- /* auart3 */
- MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
- /* i2c */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
- /* saif0 & saif1 */
- MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
- {
- .name = "user-led",
- .default_trigger = "heartbeat",
- .gpio = APX4DEVKIT_GPIO_USERLED,
- },
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
- .leds = apx4devkit_leds,
- .num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
- .wp_gpio = -EINVAL,
- .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
- { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
- { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
- defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("VDDA", "0-000a"),
- REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .always_on = 1,
- },
- .consumer_supplies = apx4devkit_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 1,
- .init_data = &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &apx4devkit_vdd_pdata,
- },
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
- platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
- apx4devkit_mxs_saif_pdata[] __initconst = {
- /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
- {
- .master_mode = 1,
- .master_id = 0,
- }, {
- .master_mode = 0,
- .master_id = 0,
- },
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
- phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
- return 0;
-}
-
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
- struct clk *clk;
-
- /* Enable fec phy clock */
- clk = clk_get_sys("enet_out", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-}
-
-static void __init apx4devkit_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(apx4devkit_pads,
- ARRAY_SIZE(apx4devkit_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart1();
- mx28_add_auart2();
- mx28_add_auart3();
-
- /*
- * Register fixup for the Micrel KS8031 PHY clock
- * (shares same ID with KS8051)
- */
- phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
- apx4devkit_phy_fixup);
-
- apx4devkit_fec_phy_clk_enable();
- mx28_add_fec(0, &mx28_fec_pdata);
-
- mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
- gpio_led_register_device(0, &apx4devkit_led_data);
-
- mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
- mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
- mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
- apx4devkit_add_regulators();
-
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
- ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
- mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
- .init = apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &apx4devkit_timer,
- .init_machine = apx4devkit_init,
- .restart = mxs_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
- /* duart */
- MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
- /* auart3 */
- MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
- /* fec1 */
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
- /* flexcan0 */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* flexcan1 */
- MX28_PAD_GPMI_CE2N__CAN1_TX,
- MX28_PAD_GPMI_CE3N__CAN1_RX,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* mxsfb (lcdif) */
- MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
- MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* mmc1 */
- MX28_PAD_GPMI_D00__SSP1_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D01__SSP1_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D02__SSP1_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D03__SSP1_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D04__SSP1_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D05__SSP1_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D06__SSP1_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D07__SSP1_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY1__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_WRN__SSP1_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_GPMI_RESETN__GPIO_0_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM4__GPIO_3_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
- MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
- /* nand */
- MX28_PAD_GPMI_D00__GPMI_D0 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D01__GPMI_D1 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D02__GPMI_D2 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D03__GPMI_D3 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D04__GPMI_D4 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D05__GPMI_D5 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D06__GPMI_D6 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D07__GPMI_D7 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_CE0N__GPMI_CE0N |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_RDY0__GPMI_READY0 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_ALE__GPMI_ALE |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_CLE__GPMI_CLE |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RESETN__GPMI_RESETN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
- /* Backlight */
- MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
- {
- .name = "user-led1",
- .default_trigger = "heartbeat",
- .gpio = M28EVK_GPIO_USERLED1,
- },
- {
- .name = "user-led2",
- .default_trigger = "heartbeat",
- .gpio = M28EVK_GPIO_USERLED2,
- },
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
- .leds = m28evk_leds,
- .num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
- {
- /* fec0 */
- .phy = PHY_INTERFACE_MODE_RMII,
- }, {
- /* fec1 */
- .phy = PHY_INTERFACE_MODE_RMII,
- },
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
- int i;
- u32 val;
- const u32 *ocotp = mxs_get_ocotp();
-
- if (!ocotp)
- return -ETIMEDOUT;
-
- /*
- * OCOTP only stores the last 4 octets for each mac address,
- * so hard-code DENX OUI (C0:E5:4E) here.
- */
- for (i = 0; i < 2; i++) {
- val = ocotp[i];
- mx28_fec_pdata[i].mac[0] = 0xC0;
- mx28_fec_pdata[i].mac[1] = 0xE5;
- mx28_fec_pdata[i].mac[2] = 0x4E;
- mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
- mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
- mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
- }
-
- return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
- {
- .name = "Ampire AM-800480R2TMQW-T01H",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30066, /* picosecond (33.26 MHz) */
- .left_margin = 0,
- .right_margin = 256,
- .upper_margin = 0,
- .lower_margin = 45,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
- },
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
- .mode_list = m28evk_video_modes,
- .mode_count = ARRAY_SIZE(m28evk_video_modes),
- .default_bpp = 16,
- .ld_intf_width = STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
- .byte_len = 16384,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
- {
- I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
- .platform_data = &m28evk_eeprom,
- },
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
- {
- /* mmc0 */
- .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- }, {
- /* mmc1 */
- .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- },
-};
-
-static void __init m28evk_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart3();
-
- if (!m28evk_fec_get_mac()) {
- mx28_add_fec(0, &mx28_fec_pdata[0]);
- mx28_add_fec(1, &mx28_fec_pdata[1]);
- }
-
- mx28_add_flexcan(0, NULL);
- mx28_add_flexcan(1, NULL);
-
- mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
- mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
- mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
- gpio_led_register_device(0, &m28evk_led_data);
-
- /* I2C */
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
- ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
- .init = m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &m28evk_timer,
- .init_machine = m28evk_init,
- .restart = mxs_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
- /* duart */
- MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart */
- MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
- MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
- MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
- MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
- /* mxsfb (lcdif) */
- MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
- MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
- MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
- MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
- MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
- /* LCD panel enable */
- MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
- /* backlight control */
- MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
- /* mmc */
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D08__SSP1_DATA4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D09__SSP1_DATA5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D10__SSP1_DATA6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D11__SSP1_DATA7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_CMD__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DETECT__SSP1_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_SSP1_SCK__SSP1_SCK |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX23_PAD_PWM4__GPIO_1_30 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX23_PAD_PWM3__GPIO_1_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
- {
- .name = "Samsung-LMS430HF02",
- .refresh = 60,
- .xres = 480,
- .yres = 272,
- .pixclock = 108096, /* picosecond (9.2 MHz) */
- .left_margin = 15,
- .right_margin = 8,
- .upper_margin = 12,
- .lower_margin = 4,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
- .mode_list = mx23evk_video_modes,
- .mode_count = ARRAY_SIZE(mx23evk_video_modes),
- .default_bpp = 32,
- .ld_intf_width = STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
- .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
- int ret;
-
- mx23_soc_init();
-
- mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
- mx23_add_duart();
- mx23_add_auart0();
-
- /* power on mmc slot by writing 0 to the gpio */
- ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
- "mmc0-slot-power");
- if (ret)
- pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
- ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
- if (ret)
- pr_warn("failed to request gpio lcd-enable: %d\n", ret);
- else
- gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
- ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
- if (ret)
- pr_warn("failed to request gpio bl-enable: %d\n", ret);
- else
- gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
- mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
- mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
- mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
- .init = mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .map_io = mx23_map_io,
- .init_irq = mx23_init_irq,
- .timer = &mx23evk_timer,
- .init_machine = mx23evk_init,
- .restart = mxs_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
- /* duart */
- MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
- /* auart3 */
- MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
- /* fec1 */
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
- /* phy power line */
- MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
- /* phy reset line */
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
- /* flexcan0 */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
- /* flexcan1 */
- MX28_PAD_GPMI_CE2N__CAN1_TX,
- MX28_PAD_GPMI_CE3N__CAN1_RX,
- /* transceiver power control */
- MX28_PAD_SSP1_CMD__GPIO_2_13,
-
- /* mxsfb (lcdif) */
- MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
- MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
- MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
- MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
- MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
- /* LCD panel enable */
- MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
- /* backlight control */
- MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_SSP1_SCK__GPIO_2_12 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM3__GPIO_3_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* mmc1 */
- MX28_PAD_GPMI_D00__SSP1_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D01__SSP1_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D02__SSP1_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D03__SSP1_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D04__SSP1_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D05__SSP1_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D06__SSP1_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D07__SSP1_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY1__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_WRN__SSP1_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_GPMI_RESETN__GPIO_0_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM4__GPIO_3_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_I2C0_SDA__I2C0_SDA |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
- /* saif0 & saif1 */
- MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
- {
- .name = "GPIO-LED",
- .default_trigger = "heartbeat",
- .gpio = MX28EVK_GPIO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
- .leds = mx28evk_leds,
- .num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
- struct clk *clk;
-
- /* Enable fec phy clock */
- clk = clk_get_sys("enet_out", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
- mdelay(1);
- gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
- {
- /* fec0 */
- .phy = PHY_INTERFACE_MODE_RMII,
- }, {
- /* fec1 */
- .phy = PHY_INTERFACE_MODE_RMII,
- },
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
- int i;
- u32 val;
- const u32 *ocotp = mxs_get_ocotp();
-
- if (!ocotp)
- return -ETIMEDOUT;
-
- /*
- * OCOTP only stores the last 4 octets for each mac address,
- * so hard-code Freescale OUI (00:04:9f) here.
- */
- for (i = 0; i < 2; i++) {
- val = ocotp[i];
- mx28_fec_pdata[i].mac[0] = 0x00;
- mx28_fec_pdata[i].mac[1] = 0x04;
- mx28_fec_pdata[i].mac[2] = 0x9f;
- mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
- mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
- mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
- }
-
- return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
- if (flexcan0_en || flexcan1_en)
- gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
- else
- gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
- flexcan0_en = enable;
- mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
- flexcan1_en = enable;
- mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
- mx28evk_flexcan_pdata[] __initconst = {
- {
- .transceiver_switch = mx28evk_flexcan0_switch,
- }, {
- .transceiver_switch = mx28evk_flexcan1_switch,
- }
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
- {
- .name = "Seiko-43WVF1G",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
- .mode_list = mx28evk_video_modes,
- .mode_count = ARRAY_SIZE(mx28evk_video_modes),
- .default_bpp = 32,
- .ld_intf_width = STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
- {
- /* mmc0 */
- .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- }, {
- /* mmc1 */
- .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- },
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("sgtl5000", 0x0a),
- },
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("VDDA", "0-000a"),
- REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .always_on = 1,
- },
- .consumer_supplies = mx28evk_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 1,
- .init_data = &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &mx28evk_vdd_pdata,
- },
-};
-static void __init mx28evk_add_regulators(void)
-{
- platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
- { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
- { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
- { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
- { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
- { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
- { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
- { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
- mx28evk_mxs_saif_pdata[] __initconst = {
- /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
- {
- .master_mode = 1,
- .master_id = 0,
- }, {
- .master_mode = 0,
- .master_id = 0,
- },
-};
-
-static void __init mx28evk_init(void)
-{
- int ret;
-
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart3();
-
- if (mx28evk_fec_get_mac())
- pr_warn("%s: failed on fec mac setup\n", __func__);
-
- ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
- if (ret)
- pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
- mx28evk_fec_reset();
- mx28_add_fec(0, &mx28_fec_pdata[0]);
- mx28_add_fec(1, &mx28_fec_pdata[1]);
-
- mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
- mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
- mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
- mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
- mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, mxs_i2c0_board_info,
- ARRAY_SIZE(mxs_i2c0_board_info));
-
- mx28evk_add_regulators();
-
- mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
- NULL, 0);
-
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
- mx28_add_rtc_stmp3xxx();
-
- gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
- .init = mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &mx28evk_timer,
- .init_machine = mx28evk_init,
- .restart = mxs_restart,
-MACHINE_END
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/micrel_phy.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
static struct fb_videomode mx23evk_video_modes[] = {
{
static struct mxsfb_platform_data mxsfb_pdata __initdata;
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
+
+static int flexcan0_en, flexcan1_en;
+
+static void mx28evk_flexcan_switch(void)
+{
+ if (flexcan0_en || flexcan1_en)
+ gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+ else
+ gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+
+static void mx28evk_flexcan0_switch(int enable)
+{
+ flexcan0_en = enable;
+ mx28evk_flexcan_switch();
+}
+
+static void mx28evk_flexcan1_switch(int enable)
+{
+ flexcan1_en = enable;
+ mx28evk_flexcan_switch();
+}
+
+static struct flexcan_platform_data flexcan_pdata[2];
+
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+ OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
{ /* sentinel */ }
};
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
-static void __init m28evk_init(void)
+static void __init imx28_evk_post_init(void)
{
- enable_clk_enet_out();
- update_fec_mac_prop(OUI_DENX);
+ if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+ "flexcan-switch")) {
+ flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+ flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+ }
+}
+static void __init m28evk_init(void)
+{
mxsfb_pdata.mode_list = m28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
+#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+ { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+ { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+ { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+ { ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+ { ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+ { ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+ { ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+ { ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+ { ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+ { TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+ { TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+ { TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev;
+ struct pinctrl *pctl;
+ int ret;
+
+ enable_clk_enet_out();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_err("%s: failed to find fec device\n", __func__);
+ return;
+ }
+
+ pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+ if (IS_ERR(pctl)) {
+ pr_err("%s: failed to get pinctrl state\n", __func__);
+ return;
+ }
+
+ ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+ if (ret) {
+ pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+ return;
+ }
+
+ /* Power up fec phy */
+ gpio_set_value(TX28_FEC_PHY_POWER, 1);
+ msleep(26); /* 25ms according to data sheet */
+
+ /* Mode strap pins */
+ gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+ gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+ gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+ udelay(100); /* minimum assertion time for nRST */
+
+ /* Deasserting FEC PHY RESET */
+ gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+ pinctrl_put(pctl);
+}
+
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
+
+ if (of_machine_is_compatible("karo,tx28"))
+ tx28_post_init();
+
+ if (of_machine_is_compatible("fsl,imx28-evk"))
+ imx28_evk_post_init();
}
static const char *imx23_dt_compat[] __initdata = {
- "fsl,imx23-evk",
- "fsl,stmp378x_devb"
- "olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
- "bluegiga,apx4devkit",
- "crystalfontz,cfa10036",
- "denx,m28evk",
- "fsl,imx28-evk",
- "karo,tx28",
"fsl,imx28",
NULL,
};
+++ /dev/null
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
- /* duart (extended setup missing in old boardcode, too */
- MX23_PAD_PWM0__DUART_RX,
- MX23_PAD_PWM1__DUART_TX,
-
- /* auart */
- MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
- /* mmc */
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_CMD__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DETECT__SSP1_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_SSP1_SCK__SSP1_SCK |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
- MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
- .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
- {
- .modalias = "enc28j60",
- .max_speed_hz = 6 * 1000 * 1000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = NULL,
- },
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
- int ret;
-
- mx23_soc_init();
-
- mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
- ARRAY_SIZE(stmp378x_dvb_pads));
-
- mx23_add_duart();
- mx23_add_auart0();
- mx23_add_rtc_stmp3xxx();
-
- /* power on mmc slot */
- ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
- GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
- if (ret)
- pr_warn("could not power mmc (%d)\n", ret);
-
- mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
- mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
- .init = stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
- .map_io = mx23_map_io,
- .init_irq = mx23_init_irq,
- .timer = &stmp378x_dvb_timer,
- .init_machine = stmp378x_dvb_init,
- .restart = mxs_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
- /* LED */
- MX28_PAD_ENET0_RXD3__GPIO_4_10 |
- MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
- /* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
- MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
- MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
- MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
- MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
- MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
- MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
- MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
- MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
- MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
- MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
- MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
- MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
- MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
- MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
- MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
- MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
- MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
- MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
- MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
- MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
- MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
- MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
- MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
- MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
- MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
- MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
- MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
- MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
- MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
- MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
- MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
- MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
- MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
- /* UART1 */
- MX28_PAD_AUART0_CTS__DUART_RX,
- MX28_PAD_AUART0_RTS__DUART_TX,
- MX28_PAD_AUART0_TX__DUART_RTS,
- MX28_PAD_AUART0_RX__DUART_CTS,
-
- /* UART2 */
- MX28_PAD_AUART1_RX__AUART1_RX,
- MX28_PAD_AUART1_TX__AUART1_TX,
- MX28_PAD_AUART1_RTS__AUART1_RTS,
- MX28_PAD_AUART1_CTS__AUART1_CTS,
-
- /* CAN */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* TSC2007 */
- MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
- {
- .name = "GPIO-LED",
- .default_trigger = "heartbeat",
- .gpio = TX28_STK5_GPIO_LED,
- },
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
- .leds = tx28_stk5v3_leds,
- .num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
- .mode = SPI_MODE_0,
- },
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
- {
- I2C_BOARD_INFO("ds1339", 0x68),
- },
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
- .wp_gpio = -EINVAL,
- .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
- ARRAY_SIZE(tx28_stk5v3_pads));
-
- mx28_add_duart(); /* UART1 */
- mx28_add_auart(1); /* UART2 */
-
- tx28_add_fec0();
- /* spi via ssp will be added when available */
- spi_register_board_info(tx28_spi_board_info,
- ARRAY_SIZE(tx28_spi_board_info));
- gpio_led_register_device(0, &tx28_stk5v3_led_data);
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
- ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
- mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
- mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
- .init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &tx28_timer,
- .init_machine = tx28_stk5v3_init,
- .restart = mxs_restart,
-MACHINE_END
#include <linux/mm.h>
#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/map.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
/*
* Define the MX23 memory map.
iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
}
-void __init mx23_init_irq(void)
-{
- icoll_init_irq();
-}
-
void __init mx28_map_io(void)
{
iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
}
-
-void __init mx28_init_irq(void)
-{
- icoll_init_irq();
-}
-
-void __init mx23_soc_init(void)
-{
- pinctrl_provide_dummies();
-
- mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
- mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
- mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
- mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
- mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-}
-
-void __init mx28_soc_init(void)
-{
- pinctrl_provide_dummies();
-
- mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
- mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
- mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
- mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
- mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
- mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
- mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
- /* PHY POWER */
- MX28_PAD_PWM4__GPIO_3_29 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
- /* PHY RESET */
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
- /* Mode strap pins 0-2 */
- MX28_PAD_ENET0_RXD0__GPIO_4_3 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- MX28_PAD_ENET0_RXD1__GPIO_4_4 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- /* nINT */
- MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
- MX28_PAD_ENET0_MDC__GPIO_4_0,
- MX28_PAD_ENET0_MDIO__GPIO_4_1,
- MX28_PAD_ENET0_TX_EN__GPIO_4_6,
- MX28_PAD_ENET0_TXD0__GPIO_4_7,
- MX28_PAD_ENET0_TXD1__GPIO_4_8,
- MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
- MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
- MX28_PAD_ENET0_RXD2__ENET1_RXD0,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1,
- MX28_PAD_ENET0_COL__ENET1_TX_EN,
- MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
- int i, ret;
-
- pr_debug("%s: Switching FEC PHY power off\n", __func__);
- ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
- ARRAY_SIZE(tx28_fec_gpio_pads));
- for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
- unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]));
-
- ret = gpio_request(gpio, "FEC");
- if (ret) {
- pr_err("Failed to request GPIO_%d_%d: %d\n",
- PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]), ret);
- goto free_gpios;
- }
- ret = gpio_direction_output(gpio, 0);
- if (ret) {
- pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
- gpio / 32 + 1, gpio % 32, ret);
- goto free_gpios;
- }
- }
-
- /* Power up fec phy */
- pr_debug("%s: Switching FEC PHY power on\n", __func__);
- ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
- if (ret) {
- pr_err("Failed to power on PHY: %d\n", ret);
- goto free_gpios;
- }
- mdelay(26); /* 25ms according to data sheet */
-
- /* nINT */
- gpio_direction_input(MXS_GPIO_NR(4, 5));
- /* Mode strap pins */
- gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
- gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
- gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
- udelay(100); /* minimum assertion time for nRST */
-
- pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
- gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
- ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
- ARRAY_SIZE(tx28_fec0_pads));
- if (ret) {
- pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
- __func__, ret);
- goto free_gpios;
- }
- pr_debug("%s: Registering FEC0 device\n", __func__);
- mx28_add_fec(0, &tx28_fec0_data);
- return 0;
-
-free_gpios:
- while (--i >= 0) {
- unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]));
-
- gpio_free(gpio);
- }
-
- return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
- int ret;
-
- ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
- ARRAY_SIZE(tx28_fec1_pads));
- if (ret) {
- pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
- __func__, ret);
- return ret;
- }
- pr_debug("%s: Registering FEC1 device\n", __func__);
- mx28_add_fec(1, &tx28_fec1_data);
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
+++ /dev/null
-/*
- * arch/arm/mach-netx/include/mach/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
- unsigned int xcno; /* number of xmac/xpec engine this eth uses */
-};
-
-#endif
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include "cpu-8815.h"
+++ /dev/null
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
/* used in asm code, so no casts */
-#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
/*
* Base address defination for Nomadik Onchip Logic Block
+++ /dev/null
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
- struct mtd_partition *parts;
- int nparts;
- int options;
- int (*init) (void);
- int (*exit) (void);
-};
-
-#define NAND_IO_DATA 0x40000000
-#define NAND_IO_CMD 0x40800000
-#define NAND_IO_ADDR 0x41000000
-
-#endif /* __ASM_ARCH_NAND_H */
struct amba_device;
#include <linux/amba/serial.h>
-#define NOMADIK_UART_DR 0x101FB000
-#define NOMADIK_UART_LCRH 0x101FB02c
-#define NOMADIK_UART_CR 0x101FB030
-#define NOMADIK_UART_FR 0x101FB018
+#define NOMADIK_UART_DR (void __iomem *)0x101FB000
+#define NOMADIK_UART_LCRH (void __iomem *)0x101FB02c
+#define NOMADIK_UART_CR (void __iomem *)0x101FB030
+#define NOMADIK_UART_FR (void __iomem *)0x101FB018
static void putc(const char c)
{
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
+#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
#include <linux/module.h>
#include <linux/io.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <asm/fiq.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <media/soc_camera.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board-ams-delta.h>
-#include <plat/keypad.h>
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
#include <plat/fpga.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/mux.h>
#include <mach/usb.h>
};
#endif
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
}
#endif
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
}
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-#include <plat/flash.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#include <plat/dma.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/omap7xx.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
+#include <mach/omap7xx.h>
#include <plat/mmc.h>
#include <mach/irqs.h>
break;
}
if (!tries)
- printk(KERN_WARNING "Timeout waiting for end of frame "
- "-- LCD may not be available\n");
+ pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
/* turn off DMA */
reg = omap_readw(OMAP_DMA_LCD_CCR);
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/platform_data/lcd-mipid.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/lcd_mipid.h>
+#include <mach/mux.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
static struct at24_platform_data at24c04 = {
.byte_len = SZ_4K / 8,
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
-#include <plat/flash.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
-#include <plat/irda.h>
+#include <mach/irda.h>
#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board-voiceblue.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/board-voiceblue.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/usb.h>
.pins[2] = 6,
};
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
- omap_board_config = voiceblue_config;
- omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
omap1_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
/* Clocks in the DSP domain need api_ck. Just assume bootloader
* has not enabled any DSP clocks */
if (clk->enable_reg == DSP_IDLECT2) {
- printk(KERN_INFO "Skipping reset check for DSP domain "
- "clock \"%s\"\n", clk->name);
+ pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+ clk->name);
return;
}
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
-#include <plat/board.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <mach/hardware.h>
static void __init omap1_show_rates(void)
{
- pr_notice("Clocking rate (xtal/DPLL1/MPU): "
- "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
- ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
- ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
- arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+ pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+ ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+ ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+ arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
u32 cpu_mask;
int __init omap1_clk_init(void)
{
struct omap_clk *c;
- const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
ck_dpll1_p = clk_get(NULL, "ck_dpll1");
ck_ref_p = clk_get(NULL, "ck_ref");
- info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
- if (info != NULL) {
- if (!cpu_is_omap15xx())
- crystal_type = info->system_clock_type;
- }
-
if (cpu_is_omap7xx())
ck_ref.rate = 13000000;
if (cpu_is_omap16xx() && crystal_type == 2)
ck_ref.rate = 19200000;
- pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
- "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+ pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+ omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
-#include <plat/omap7xx.h>
+#include <mach/omap7xx.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irqs.h>
+
+#include <mach/irqs.h>
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
d->chan = kzalloc(sizeof(struct omap_dma_lch) *
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&pdev->dev, "%s: Memory allocation failed"
- "for d->chan!!!\n", __func__);
+ dev_err(&pdev->dev,
+ "%s: Memory allocation failed for d->chan!\n",
+ __func__);
goto exit_release_d;
}
#include <linux/mtd/map.h>
#include <plat/tc.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
*/
#include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
void __init omap1_i2c_mux_pins(int bus_id)
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
-#include <plat/irqs.h>
-
/*
* Interrupt number used for passing control from FIQ to IRQ.
* IRQ12, described as reserved, has been selected.
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
+#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
+#define AMS_DELTA_GPIO_PIN_CONFIG 11
+#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
--- /dev/null
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL 0x2B
+
+#define SOFIA_I2C_ADDR 0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG 0x03
+
+#define SOFIA_USB_POWER 0x01
+#define SOFIA_MMC_POWER 0x04
+#define SOFIA_BLUETOOTH_POWER 0x08
+#define SOFIA_MMILIGHT_POWER 0x20
+
+#define SOFIA_POWER2_REG 0x04
+#define SOFIA_BACKLIGHT_REG 0x06
+#define SOFIA_KEYLIGHT_REG 0x07
+#define SOFIA_DIMMING_REG 0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
--- /dev/null
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /* __ASM_ARCH_VOICEBLUE_H */
+
--- /dev/null
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/
-
-#include <plat/gpio.h>
/*
* arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ * file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+#include <asm/sizes.h>
#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
? 0 : OMAP_CS3_PHYS;
}
+#endif /* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ * files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE (0xfffec700)
+#define MPU_TIMER_FREE (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
+#define MPU_TIMER_AR (1 << 1)
+#define MPU_TIMER_ST (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE (0xfffece00)
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
+#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE (0xfffe0800)
+#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
+# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
+# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
+# define SOFT_UDC_REQ (1 << 4)
+# define SOFT_USB_CLK_REQ (1 << 3)
+# define SOFT_DPLL_REQ (1 << 0)
+#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
+# define DIS_MMC2_DPLL_REQ (1 << 11)
+# define DIS_MMC1_DPLL_REQ (1 << 10)
+# define DIS_UART3_DPLL_REQ (1 << 9)
+# define DIS_UART2_DPLL_REQ (1 << 8)
+# define DIS_UART1_DPLL_REQ (1 << 7)
+# define DIS_USB_HOST_DPLL_REQ (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
+#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+
+#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET 0x00
+#define IRQ_MIR_REG_OFFSET 0x04
+#define IRQ_SIR_IRQ_REG_OFFSET 0x10
+#define IRQ_SIR_FIQ_REG_OFFSET 0x14
+#define IRQ_CONTROL_REG_OFFSET 0x18
+#define IRQ_ISR_REG_OFFSET 0x9c
+#define IRQ_ILR0_REG_OFFSET 0x1c
+#define IRQ_GMR_REG_OFFSET 0xa0
+
#endif
-#endif
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0 0xfffe1080
+#define MOD_CONF_CTRL_1 0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define PULL_DWN_CTRL_4 0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E 0xfffe1090
+#define FUNC_MUX_CTRL_F 0xfffe1094
+#define FUNC_MUX_CTRL_10 0xfffe1098
+#define FUNC_MUX_CTRL_11 0xfffe109c
+#define FUNC_MUX_CTRL_12 0xfffe10a0
+#define PU_PD_SEL_0 0xfffe10b4
+#define PU_PD_SEL_1 0xfffe10b8
+#define PU_PD_SEL_2 0xfffe10bc
+#define PU_PD_SEL_3 0xfffe10c0
+#define PU_PD_SEL_4 0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE 0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE (0xfffec900)
+#define MPUI_CTRL (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE 0xfffbd000
+#define OMAP_LPG2_BASE 0xfffbd800
+#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE 0xfffb5800
+#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/irda.h
+ *
+ * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL 1 /* Selects IrDA */
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+#define IR_MIRMODE 8
+
+struct omap_irda_config {
+ int transceiver_cap;
+ int (*transceiver_mode)(struct device *dev, int mode);
+ int (*select_irda)(struct device *dev, int state);
+ int rx_channel;
+ int tx_channel;
+ unsigned long dest_start;
+ unsigned long src_start;
+ int tx_trigger;
+ int rx_trigger;
+ int mode;
+};
+
+#endif
/*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ * arch/arm/plat-omap/include/mach/irqs.h
+ *
+ * Copyright (C) Greg Lonnon 2001
+ * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ * are different.
*/
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA 1
+#define INT_FIQ 3
+#define INT_RTDX 6
+#define INT_DSP_MMU_ABORT 7
+#define INT_HOST 8
+#define INT_ABORT 9
+#define INT_BRIDGE_PRIV 13
+#define INT_GPIO_BANK1 14
+#define INT_UART3 15
+#define INT_TIMER3 16
+#define INT_DMA_CH0_6 19
+#define INT_DMA_CH1_7 20
+#define INT_DMA_CH2_8 21
+#define INT_DMA_CH3 22
+#define INT_DMA_CH4 23
+#define INT_DMA_CH5 24
+#define INT_TIMER1 26
+#define INT_WD_TIMER 27
+#define INT_BRIDGE_PUB 28
+#define INT_TIMER2 30
+#define INT_LCD_CTRL 31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ 0
+#define INT_1510_RES2 2
+#define INT_1510_SPI_TX 4
+#define INT_1510_SPI_RX 5
+#define INT_1510_DSP_MAILBOX1 10
+#define INT_1510_DSP_MAILBOX2 11
+#define INT_1510_RES12 12
+#define INT_1510_LB_MMU 17
+#define INT_1510_RES18 18
+#define INT_1510_LOCAL_BUS 29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ 2
+#define INT_1610_McBSP2_TX 4
+#define INT_1610_McBSP2_RX 5
+#define INT_1610_DSP_MAILBOX1 10
+#define INT_1610_DSP_MAILBOX2 11
+#define INT_1610_LCD_LINE 12
+#define INT_1610_GPTIMER1 17
+#define INT_1610_GPTIMER2 18
+#define INT_1610_SSR_FIFO_0 29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ 0
+#define INT_7XX_IH2_IRQ 1
+#define INT_7XX_USB_NON_ISO 2
+#define INT_7XX_USB_ISO 3
+#define INT_7XX_ICR 4
+#define INT_7XX_EAC 5
+#define INT_7XX_GPIO_BANK1 6
+#define INT_7XX_GPIO_BANK2 7
+#define INT_7XX_GPIO_BANK3 8
+#define INT_7XX_McBSP2TX 10
+#define INT_7XX_McBSP2RX 11
+#define INT_7XX_McBSP2RX_OVF 12
+#define INT_7XX_LCD_LINE 14
+#define INT_7XX_GSM_PROTECT 15
+#define INT_7XX_TIMER3 16
+#define INT_7XX_GPIO_BANK5 17
+#define INT_7XX_GPIO_BANK6 18
+#define INT_7XX_SPGIO_WR 29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE 32
+
+#define INT_KEYBOARD (1 + IH2_BASE)
+#define INT_uWireTX (2 + IH2_BASE)
+#define INT_uWireRX (3 + IH2_BASE)
+#define INT_I2C (4 + IH2_BASE)
+#define INT_MPUIO (5 + IH2_BASE)
+#define INT_USB_HHC_1 (6 + IH2_BASE)
+#define INT_McBSP3TX (10 + IH2_BASE)
+#define INT_McBSP3RX (11 + IH2_BASE)
+#define INT_McBSP1TX (12 + IH2_BASE)
+#define INT_McBSP1RX (13 + IH2_BASE)
+#define INT_UART1 (14 + IH2_BASE)
+#define INT_UART2 (15 + IH2_BASE)
+#define INT_BT_MCSI1TX (16 + IH2_BASE)
+#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
+#define INT_USB_W2FC (20 + IH2_BASE)
+#define INT_1WIRE (21 + IH2_BASE)
+#define INT_OS_TIMER (22 + IH2_BASE)
+#define INT_MMC (23 + IH2_BASE)
+#define INT_GAUGE_32K (24 + IH2_BASE)
+#define INT_RTC_TIMER (25 + IH2_BASE)
+#define INT_RTC_ALARM (26 + IH2_BASE)
+#define INT_MEM_STICK (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
+#define INT_1610_USB_OTG (8 + IH2_BASE)
+#define INT_1610_SoSSI (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
+#define INT_1610_DSP_MMU (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
+#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
+#define INT_1610_SPI (49 + IH2_BASE)
+#define INT_1610_DMA_CH6 (53 + IH2_BASE)
+#define INT_1610_DMA_CH7 (54 + IH2_BASE)
+#define INT_1610_DMA_CH8 (55 + IH2_BASE)
+#define INT_1610_DMA_CH9 (56 + IH2_BASE)
+#define INT_1610_DMA_CH10 (57 + IH2_BASE)
+#define INT_1610_DMA_CH11 (58 + IH2_BASE)
+#define INT_1610_DMA_CH12 (59 + IH2_BASE)
+#define INT_1610_DMA_CH13 (60 + IH2_BASE)
+#define INT_1610_DMA_CH14 (61 + IH2_BASE)
+#define INT_1610_DMA_CH15 (62 + IH2_BASE)
+#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_7XX_CFCD (2 + IH2_BASE)
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
+#define INT_7XX_I2C (4 + IH2_BASE)
+#define INT_7XX_PCC (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_7XX_MCSI (16 + IH2_BASE)
+#define INT_7XX_uWireTX (17 + IH2_BASE)
+#define INT_7XX_uWireRX (18 + IH2_BASE)
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
+#define INT_7XX_UPLD (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
+#define INT_7XX_RNG (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
+#define INT_7XX_MPUIO (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
+#define INT_7XX_NAND (63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES 192
+#define IH_GPIO_BASE (128 + IH2_BASE)
+#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START 1024
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ * For example, W8_1610_MMC2_DAT0, where:
+ * - W8 = ball
+ * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
+ * - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+ .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
+ .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
+ .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+ .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
+ pull_reg, pull_bit, pull_status, \
+ pu_pd_reg, pu_pd_status, debug_status) \
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG(mux_reg, mode_offset, mode) \
+ PULL_REG(pull_reg, pull_bit, pull_status) \
+ PU_PD_REG(pu_pd_reg, pu_pd_status) \
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ * as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_7XX(mux_reg, mode_offset, mode) \
+ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+struct pin_config {
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
+
+ const unsigned char mask_offset;
+ const unsigned char mask;
+
+ const char *pull_name;
+ const unsigned int pull_reg;
+ const unsigned char pull_val;
+ const unsigned char pull_bit;
+
+ const char *pu_pd_name;
+ const unsigned int pu_pd_reg;
+ const unsigned char pu_pd_val;
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+ /* OMAP 730 keyboard */
+ E2_7XX_KBR0,
+ J7_7XX_KBR1,
+ E1_7XX_KBR2,
+ F3_7XX_KBR3,
+ D2_7XX_KBR4,
+ C2_7XX_KBC0,
+ D3_7XX_KBC1,
+ E4_7XX_KBC2,
+ F4_7XX_KBC3,
+ E3_7XX_KBC4,
+
+ /* USB */
+ AA17_7XX_USB_DM,
+ W16_7XX_USB_PU_EN,
+ W17_7XX_USB_VBUSI,
+ W18_7XX_USB_DMCK_OUT,
+ W19_7XX_USB_DCRST,
+
+ /* MMC */
+ MMC_7XX_CMD,
+ MMC_7XX_CLK,
+ MMC_7XX_DAT0,
+
+ /* I2C */
+ I2C_7XX_SCL,
+ I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
+
+ /* UART */
+ UART_7XX_1,
+ UART_7XX_2,
+};
+
+enum omap1xxx_index {
+ /* UART1 (BT_UART_GATING)*/
+ UART1_TX = 0,
+ UART1_RTS,
+
+ /* UART2 (COM_UART_GATING)*/
+ UART2_TX,
+ UART2_RX,
+ UART2_CTS,
+ UART2_RTS,
+
+ /* UART3 (GIGA_UART_GATING) */
+ UART3_TX,
+ UART3_RX,
+ UART3_CTS,
+ UART3_RTS,
+ UART3_CLKREQ,
+ UART3_BCLK, /* 12MHz clock out */
+ Y15_1610_UART3_RTS,
+
+ /* PWT & PWL */
+ PWT,
+ PWL,
+
+ /* USB master generic */
+ R18_USB_VBUS,
+ R18_1510_USB_GPIO0,
+ W4_USB_PUEN,
+ W4_USB_CLKO,
+ W4_USB_HIGHZ,
+ W4_GPIO58,
+
+ /* USB1 master */
+ USB1_SUSP,
+ USB1_SEO,
+ W13_1610_USB1_SE0,
+ USB1_TXEN,
+ USB1_TXD,
+ USB1_VP,
+ USB1_VM,
+ USB1_RCV,
+ USB1_SPEED,
+ R13_1610_USB1_SPEED,
+ R13_1710_USB1_SE0,
+
+ /* USB2 master */
+ USB2_SUSP,
+ USB2_VP,
+ USB2_TXEN,
+ USB2_VM,
+ USB2_RCV,
+ USB2_SEO,
+ USB2_TXD,
+
+ /* OMAP-1510 GPIO */
+ R18_1510_GPIO0,
+ R19_1510_GPIO1,
+ M14_1510_GPIO2,
+
+ /* OMAP1610 GPIO */
+ P18_1610_GPIO3,
+ Y15_1610_GPIO17,
+
+ /* OMAP-1710 GPIO */
+ R18_1710_GPIO0,
+ V2_1710_GPIO10,
+ N21_1710_GPIO14,
+ W15_1710_GPIO40,
+
+ /* MPUIO */
+ MPUIO2,
+ N15_1610_MPUIO2,
+ MPUIO4,
+ MPUIO5,
+ T20_1610_MPUIO5,
+ W11_1610_MPUIO6,
+ V10_1610_MPUIO7,
+ W11_1610_MPUIO9,
+ V10_1610_MPUIO10,
+ W10_1610_MPUIO11,
+ E20_1610_MPUIO13,
+ U20_1610_MPUIO14,
+ E19_1610_MPUIO15,
+
+ /* MCBSP2 */
+ MCBSP2_CLKR,
+ MCBSP2_CLKX,
+ MCBSP2_DR,
+ MCBSP2_DX,
+ MCBSP2_FSR,
+ MCBSP2_FSX,
+
+ /* MCBSP3 */
+ MCBSP3_CLKX,
+
+ /* Misc ballouts */
+ BALLOUT_V8_ARMIO3,
+ N20_HDQ,
+
+ /* OMAP-1610 MMC2 */
+ W8_1610_MMC2_DAT0,
+ V8_1610_MMC2_DAT1,
+ W15_1610_MMC2_DAT2,
+ R10_1610_MMC2_DAT3,
+ Y10_1610_MMC2_CLK,
+ Y8_1610_MMC2_CMD,
+ V9_1610_MMC2_CMDDIR,
+ V5_1610_MMC2_DATDIR0,
+ W19_1610_MMC2_DATDIR1,
+ R18_1610_MMC2_CLKIN,
+
+ /* OMAP-1610 External Trace Interface */
+ M19_1610_ETM_PSTAT0,
+ L15_1610_ETM_PSTAT1,
+ L18_1610_ETM_PSTAT2,
+ L19_1610_ETM_D0,
+ J19_1610_ETM_D6,
+ J18_1610_ETM_D7,
+
+ /* OMAP16XX GPIO */
+ P20_1610_GPIO4,
+ V9_1610_GPIO7,
+ W8_1610_GPIO9,
+ N20_1610_GPIO11,
+ N19_1610_GPIO13,
+ P10_1610_GPIO22,
+ V5_1610_GPIO24,
+ AA20_1610_GPIO_41,
+ W19_1610_GPIO48,
+ M7_1610_GPIO62,
+ V14_16XX_GPIO37,
+ R9_16XX_GPIO18,
+ L14_16XX_GPIO49,
+
+ /* OMAP-1610 uWire */
+ V19_1610_UWIRE_SCLK,
+ U18_1610_UWIRE_SDI,
+ W21_1610_UWIRE_SDO,
+ N14_1610_UWIRE_CS0,
+ P15_1610_UWIRE_CS3,
+ N15_1610_UWIRE_CS1,
+
+ /* OMAP-1610 SPI */
+ U19_1610_SPIF_SCK,
+ U18_1610_SPIF_DIN,
+ P20_1610_SPIF_DIN,
+ W21_1610_SPIF_DOUT,
+ R18_1610_SPIF_DOUT,
+ N14_1610_SPIF_CS0,
+ N15_1610_SPIF_CS1,
+ T19_1610_SPIF_CS2,
+ P15_1610_SPIF_CS3,
+
+ /* OMAP-1610 Flash */
+ L3_1610_FLASH_CS2B_OE,
+ M8_1610_FLASH_CS2B_WE,
+
+ /* First MMC */
+ MMC_CMD,
+ MMC_DAT1,
+ MMC_DAT2,
+ MMC_DAT0,
+ MMC_CLK,
+ MMC_DAT3,
+
+ /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+ M15_1710_MMC_CLKI,
+ P19_1710_MMC_CMDDIR,
+ P20_1710_MMC_DATDIR0,
+
+ /* OMAP-1610 USB0 alternate pin configuration */
+ W9_USB0_TXEN,
+ AA9_USB0_VP,
+ Y5_USB0_RCV,
+ R9_USB0_VM,
+ V6_USB0_TXD,
+ W5_USB0_SE0,
+ V9_USB0_SPEED,
+ V9_USB0_SUSP,
+
+ /* USB2 */
+ W9_USB2_TXEN,
+ AA9_USB2_VP,
+ Y5_USB2_RCV,
+ R9_USB2_VM,
+ V6_USB2_TXD,
+ W5_USB2_SE0,
+
+ /* 16XX UART */
+ R13_1610_UART1_TX,
+ V14_16XX_UART1_RX,
+ R14_1610_UART1_CTS,
+ AA15_1610_UART1_RTS,
+ R9_16XX_UART2_RX,
+ L14_16XX_UART3_RX,
+
+ /* I2C OMAP-1610 */
+ I2C_SCL,
+ I2C_SDA,
+
+ /* Keypad */
+ F18_1610_KBC0,
+ D20_1610_KBC1,
+ D19_1610_KBC2,
+ E18_1610_KBC3,
+ C21_1610_KBC4,
+ G18_1610_KBR0,
+ F19_1610_KBR1,
+ H14_1610_KBR2,
+ E20_1610_KBR3,
+ E19_1610_KBR4,
+ N19_1610_KBR5,
+
+ /* Power management */
+ T20_1610_LOW_PWR,
+
+ /* MCLK Settings */
+ V5_1710_MCLK_ON,
+ V5_1710_MCLK_OFF,
+ R10_1610_MCLK_ON,
+ R10_1610_MCLK_OFF,
+
+ /* CompactFlash controller */
+ P11_1610_CF_CD2,
+ R11_1610_CF_IOIS16,
+ V10_1610_CF_IREQ,
+ W10_1610_CF_RESET,
+ W11_1610_CF_CD1,
+
+ /* parallel camera */
+ J15_1610_CAM_LCLK,
+ J18_1610_CAM_D7,
+ J19_1610_CAM_D6,
+ J14_1610_CAM_D5,
+ K18_1610_CAM_D4,
+ K19_1610_CAM_D3,
+ K15_1610_CAM_D2,
+ K14_1610_CAM_D1,
+ L19_1610_CAM_D0,
+ L18_1610_CAM_VS,
+ L15_1610_CAM_HS,
+ M19_1610_CAM_RSTZ,
+ Y15_1610_CAM_OUTCLK,
+
+ /* serial camera */
+ H19_1610_CAM_EXCLK,
+ Y12_1610_CCP_CLKP,
+ W13_1610_CCP_CLKM,
+ W14_1610_CCP_DATAP,
+ Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+ struct pin_config *pins;
+ unsigned long size;
+ int (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
--- /dev/null
+/*
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE 0xE0000000
+#define OMAP1510_DSP_SIZE 0x28000
+#define OMAP1510_DSP_START 0xE0000000
+
+#define OMAP1510_DSPREG_BASE 0xE1000000
+#define OMAP1510_DSPREG_SIZE SZ_128K
+#define OMAP1510_DSPREG_START 0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
+#endif /* __ASM_ARCH_OMAP15XX_H */
+
--- /dev/null
+/*
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE 0xE0000000
+#define OMAP16XX_DSP_SIZE 0x28000
+#define OMAP16XX_DSP_START 0xE0000000
+
+#define OMAP16XX_DSPREG_BASE 0xE1000000
+#define OMAP16XX_DSPREG_SIZE SZ_128K
+#define OMAP16XX_DSPREG_START 0xE1000000
+
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE (0xfffe0000)
+#define OMAP_IH2_1_BASE (0xfffe0100)
+#define OMAP_IH2_2_BASE (0xfffe0200)
+#define OMAP_IH2_3_BASE (0xfffe0300)
+
+#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL 0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR (OMAP1_UART3_BASE + 0)
+#define UART3_THR (OMAP1_UART3_BASE + 0)
+#define UART3_DLL (OMAP1_UART3_BASE + 0)
+#define UART3_IER (OMAP1_UART3_BASE + 4)
+#define UART3_DLH (OMAP1_UART3_BASE + 4)
+#define UART3_IIR (OMAP1_UART3_BASE + 8)
+#define UART3_FCR (OMAP1_UART3_BASE + 8)
+#define UART3_EFR (OMAP1_UART3_BASE + 8)
+#define UART3_LCR (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)
+#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT 5
+#define WCLR_PTV_SHIFT 2
+
+#define WWPS_W_PEND_WSPR (1 << 4)
+#define WWPS_W_PEND_WTGR (1 << 3)
+#define WWPS_W_PEND_WLDR (1 << 2)
+#define WWPS_W_PEND_WCRR (1 << 1)
+#define WWPS_W_PEND_WCLR (1 << 0)
+
+#define WSPR_ENABLE_0 (0x0000bbbb)
+#define WSPR_ENABLE_1 (0x00004444)
+#define WSPR_DISABLE_0 (0x0000aaaa)
+#define WSPR_DISABLE_1 (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
+#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
+
+#endif /* __ASM_ARCH_OMAP16XX_H */
+
--- /dev/null
+/*
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE 0xE0000000
+#define OMAP7XX_DSP_SIZE 0x50000
+#define OMAP7XX_DSP_START 0xE0000000
+
+#define OMAP7XX_DSPREG_BASE 0xE1000000
+#define OMAP7XX_DSPREG_SIZE SZ_128K
+#define OMAP7XX_DSPREG_START 0xE1000000
+
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE 0xfffe1000
+#define OMAP7XX_IO_CONF_0 0xfffe1070
+#define OMAP7XX_IO_CONF_1 0xfffe1074
+#define OMAP7XX_IO_CONF_2 0xfffe1078
+#define OMAP7XX_IO_CONF_3 0xfffe107c
+#define OMAP7XX_IO_CONF_4 0xfffe1080
+#define OMAP7XX_IO_CONF_5 0xfffe1084
+#define OMAP7XX_IO_CONF_6 0xfffe1088
+#define OMAP7XX_IO_CONF_7 0xfffe108c
+#define OMAP7XX_IO_CONF_8 0xfffe1090
+#define OMAP7XX_IO_CONF_9 0xfffe1094
+#define OMAP7XX_IO_CONF_10 0xfffe1098
+#define OMAP7XX_IO_CONF_11 0xfffe109c
+#define OMAP7XX_IO_CONF_12 0xfffe10a0
+#define OMAP7XX_IO_CONF_13 0xfffe10a4
+
+#define OMAP7XX_MODE_1 0xfffe1010
+#define OMAP7XX_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0 0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0 0xfffecc50
+#define OMAP7XX_FLASH_CFG_1 0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE 0xfffbb800
+#define OMAP7XX_DSP_M_CTL 0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP7XX_H */
+
+++ /dev/null
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap15xx()) {
- printk(KERN_ERR "DMA virtual resolution is not supported "
- "in 1510 mode\n");
+ pr_err("DMA virtual resolution is not supported in 1510 mode\n");
BUG();
}
lcd_dma.vxres = vxres;
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
"LCD DMA", NULL);
if (r != 0)
- printk(KERN_ERR "unable to request IRQ for LCD DMA "
- "(error %d)\n", r);
+ pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
return r;
}
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
gpio_set_value(GPIO_IDLE, 0);
}
- __raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
+ if (fpga) {
+ __raw_writew(~0, &fpga->leds);
+ if (evt == led_halted) {
+ iounmap(fpga);
+ fpga = NULL;
+ }
}
goto done;
/*
* Actually burn the LEDs
*/
- if (led_state & LED_STATE_ENABLED)
+ if (led_state & LED_STATE_ENABLED && fpga)
__raw_writew(~hw_led_state, &fpga->leds);
done:
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "leds.h"
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
#endif
}
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+ if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+ || !arch_mux_cfg->cfg_reg) {
+ printk(KERN_ERR "Invalid pin table\n");
+ return -EINVAL;
+ }
+
+ mux_cfg = arch_mux_cfg;
+
+ return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+ struct pin_config *reg;
+
+ if (!cpu_class_is_omap1()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (mux_cfg == NULL) {
+ printk(KERN_ERR "Pin mux table not initialized\n");
+ return -ENODEV;
+ }
+
+ if (index >= mux_cfg->size) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, mux_cfg->size);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ reg = &mux_cfg->pins[index];
+
+ if (!mux_cfg->cfg_reg)
+ return -ENODEV;
+
+ return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
int __init omap1_mux_init(void)
{
if (cpu_is_omap7xx()) {
return omap_mux_register(&arch_mux_cfg);
}
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif /* CONFIG_OMAP_MUX */
+
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <asm/mach-types.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include "pm.h"
#include <asm/irq.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select HIGHMEM
+ select PINCTRL
help
Compile a kernel suitable for booting most boards
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
-omap-2-3-common = irq.o
-hwmod-common = omap_hwmod.o \
- omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+# INTCPS IP block support - XXX should be moved to drivers/
+obj-$(CONFIG_ARCH_OMAP2) += irq.o
+obj-$(CONFIG_ARCH_OMAP3) += irq.o
+obj-$(CONFIG_SOC_AM33XX) += irq.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
+# Secure monitor API support
+obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-omap-4-5-common = omap4-common.o omap-wakeupgen.o \
- sleep44xx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
-obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
+obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
+obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
endif
ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
-omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
- prcm_mpu44xx.o prminst44xx.o \
- vc44xx_data.o vp44xx_data.o
-obj-y += prm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y += prcm.o prm_common.o
+obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
+omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
+ prcm_mpu44xx.o prminst44xx.o \
+ vc44xx_data.o vp44xx_data.o \
+ prm44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
-voltagedomain-common := voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+obj-y += voltage.o vc.o vp.o
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
-obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
-powerdomain-common += powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
+obj-y += powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
# PRCM clockdomain control
-clockdomain-common += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
+obj-y += clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
+obj-y += clock.o clock_common_data.o \
+ clkt_dpll.o clkt_clksel.o
+obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
+obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
+obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
--- /dev/null
+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+#define L4_SLOW_AM33XX_BASE 0x48000000
+
+#define AM33XX_SCM_BASE 0x44E10000
+#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
+#define AM33XX_PRCM_BASE 0x44E00000
+
+#endif /* __ASM_ARCH_AM33XX_H */
#include <linux/davinci_emac.h>
#include <asm/system.h>
#include <plat/omap_device.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
--- /dev/null
+/*:
+ * Address mappings and base address for AM35XX specific interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AM35XX_H
+#define __ASM_ARCH_AM35XX_H
+
+/*
+ * Base addresses
+ * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
+ */
+#define AM35XX_IPSS_EMAC_BASE 0x5C000000
+#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000
+#define AM35XX_IPSS_HECC_BASE 0x5C050000
+#define AM35XX_IPSS_VPFE_BASE 0x5C060000
+
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET (0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000)
+#define AM35XX_HECC_RAM_OFFSET (0x3000)
+#define AM35XX_HECC_MBOX_OFFSET (0x2000)
+#define AM35XX_HECC_INT_LINE (0x0)
+#define AM35XX_HECC_VERSION (0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET (0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET (0x30000)
+#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \
+ AM35XX_EMAC_MDIO_OFFSET)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000)
+#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \
+ AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000)
+
+#endif /* __ASM_ARCH_AM35XX_H */
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_platform_data sdp2430_twldata = {
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
&sdp2430_twldata);
return 0;
}
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
-#include <plat/board.h>
#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include "board-flash.h"
#include "mux.h"
.default_device = &sdp3430_lcd_device,
};
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
}
static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(16) | BIT(17),
.setup = sdp3430_twl_gpio_setup,
int gpio_pendown;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = sdp3430_config;
- omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/board.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
.reset_gpio_port[2] = -EINVAL
};
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
- omap_board_config = sdp_config;
- omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
+#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
- .irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &sdp4430_twldata,
- &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+ &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
#include <linux/init.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#define GPIO_USB_POWER 35
#define GPIO_USB_NRESET 38
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = am3517_crane_config;
- omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
.flags = IORESOURCE_MEM,
},
{
- .start = INT_35XX_HECC0_IRQ,
- .end = INT_35XX_HECC0_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
platform_device_register(&am3517_hecc_device);
}
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
static void __init am3517_evm_init(void)
{
- omap_board_config = am3517_evm_config;
- omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();
#include <linux/smc91x.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <plat/led.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <mach/hardware.h>
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
.id = 0,
}
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = cm_t35_twl_gpio_setup,
};
static inline void cm_t3730_init_mux(void) {}
#endif
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
static void __init cm_t3x_common_init(void)
{
- omap_board_config = cm_t35_config;
- omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "mux.h"
#include "control.h"
.flags = IORESOURCE_MEM,
},
{
- .start = INT_35XX_HECC0_IRQ,
- .end = INT_35XX_HECC0_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
static inline void cm_t3517_init_nand(void) {}
#endif
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = cm_t3517_config;
- omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
cm_t3517_init_nand();
cm_t3517_init_rtc();
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <mach/id.h>
+#include "id.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
#include "sdram-micron-mt46h32m32lf-6.h"
-
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
}
static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
-#include <plat/irqs.h>
+#include <plat/cpu.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <plat/tc.h>
+#include "common.h"
#include "board-flash.h"
#define REG_FPGA_REV 0x10
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
-#include <plat/board.h>
#include "common.h"
#include "common-board-devices.h"
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = omap_gic_of_init,
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
.init_early = omap5_init_early,
.init_irq = omap_gic_of_init,
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
-#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include "debug-devices.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include "common.h"
#include "mux.h"
#include "control.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
+
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include "mux.h"
#include "hsmmc.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = IGEP2_SMSC911X_CS,
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = igep_twl_gpio_setup,
};
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
-
-#include <asm/delay.h>
#include <plat/usb.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = ldp_twl_gpio_setup,
};
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
-#include <mach/irqs.h>
-#include <plat/mcspi.h>
-#include <plat/onenand.h>
#include <plat/mmc.h>
-#include <plat/serial.h>
#include "mux.h"
ret = menelaus_set_regulator_sleep(1, val);
if (ret < 0) {
- printk(KERN_ERR "Could not set regulators to sleep on "
- "menelaus: %u\n", ret);
+ pr_err("Could not set regulators to sleep on menelaus: %u\n",
+ ret);
return ret;
}
return 0;
ret = menelaus_set_vcore_hw(1400, 1050);
if (ret < 0) {
- printk(KERN_ERR "Could not set VCORE voltage on "
- "menelaus: %u\n", ret);
+ pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
return ret;
}
return 0;
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
- .irq = INT_24XX_SYS_NIRQ,
+ .irq = 7 + OMAP_INTC_START,
.platform_data = &n8x0_menelaus_platform_data,
},
};
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
}
static struct twl4030_gpio_platform_data beagle_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
#include <linux/mmc/host.h>
#include <linux/export.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64
#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ * GEN_1 = 0x01150000
+ * GEN_2 = 0x92200000
+ */
+enum {
+ OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
+ OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
+};
+
static u8 omap3_evm_version;
u8 get_omap3_evm_rev(void)
}
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = OMAP3EVM_SMSC911X_CS,
}
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3evm_twl_gpio_setup,
};
return 0;
}
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
omap3_mux_init(obm, OMAP_PACKAGE_CBB);
- omap_board_config = omap3_evm_config;
- omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "gpmc-smsc911x.h"
+#include <plat/gpmc.h>
+#include <plat/sdrc.h>
+#include <plat/usb.h>
+
+#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc-smsc911x.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
#define OMAP3LOGIC_SMSC911X_CS 1
#define OMAP3530_LV_SOM_MMC_GPIO_CD 110
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/regulator/fixed.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
-#include <mach/hardware.h>
-#include <plat/mcspi.h>
#include <plat/usb.h>
#include <video/omapdss.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
}
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = omap3pandora_twl_gpio_setup,
};
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#define OMAP3STALKER_ETHR_START 0x2c000000
#define OMAP3STALKER_ETHR_SIZE 1024
}
static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3stalker_twl_gpio_setup,
};
#define OMAP3_STALKER_TS_GPIO 175
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_board_config = omap3_stalker_config;
- omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/system_info.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include "mux.h"
}
static struct twl4030_gpio_platform_data touchbook_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
+#include "soc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
- .irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
- &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+ &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <mach/hardware.h>
-#include <plat/nand.h>
-#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.id = 0,
}
static struct twl4030_gpio_platform_data overo_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = overo_twl_gpio_setup,
};
udelay(10);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
} else {
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_W2W_NRESET\n");
+ pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
}
ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
if (ret == 0)
gpio_export(OVERO_GPIO_USBH_CPEN, 0);
else
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_USBH_CPEN\n");
+ pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
}
MACHINE_START(OVERO, "Gumstix Overo")
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
-#include <plat/onenand.h>
+#include <plat/serial.h>
#include "mux.h"
#include "hsmmc.h"
/* TWL */
static struct twl4030_gpio_platform_data rm680_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pullups = BIT(0),
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
- omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+ omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
}
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
#include <asm/system_info.h>
-#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
}
static struct twl4030_gpio_platform_data rx51_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
| BIT(4) | BIT(5)
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
- omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+ omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
#include <asm/mach-types.h>
#include <video/omapdss.h>
#include <plat/vram.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
#include "mux.h"
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
--- /dev/null
+/*
+ * Defines for rx51 boards
+ */
+
+#ifndef _OMAP_BOARD_RX51_H
+#define _OMAP_BOARD_RX51_H
+
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_video_mem_init(void);
+
+#endif
#include <linux/kernel.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/irqs.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
.power = 500,
};
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
static void __init ti81xx_evm_init(void)
{
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = ti81xx_evm_config;
- omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
usb_musb_init(&musb_board_data);
}
#include <linux/regulator/machine.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#include <mach/board-zoom.h>
+#include "soc.h"
+#include "common.h"
+
#define ZOOM_SMSC911X_CS 7
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem"
- "for Quad UART(TL16CP754C)\n");
+ pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
return;
}
if (gpio_request_one(debug_board_detect, GPIOF_IN,
"Zoom debug board detect") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
- "board detect\n", debug_board_detect);
+ pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
+ debug_board_detect);
return 0;
}
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/spi/spi.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <mach/board-zoom.h>
+#include "common.h"
+
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
}
static struct twl4030_gpio_platform_data zoom_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom_twl_gpio_setup,
};
codec_data->hs_extmute = 1;
codec_data->set_hs_extmute = zoom2_set_hs_extmute;
}
- omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+ omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/board.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC CS0 timing params used:"
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: "
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
if (sdrc_cs1)
omap3_configure_core_dpll(
if (!clks->parent) {
/* This indicates a data problem */
- WARN(1, "clock: Could not find parent clock %s in clksel array "
- "of clock %s\n", src_clk->name, clk->name);
+ WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
+ clk->name, src_clk->name);
return NULL;
}
if (max_div == 0) {
/* This indicates an error in the clksel data */
- WARN(1, "clock: Could not find divisor for clock %s parent %s"
- "\n", clk->name, src_clk->parent->name);
+ WARN(1, "clock: %s: could not find divisor for parent %s\n",
+ clk->name, src_clk->parent->name);
return 0;
}
if (!clkr->div) {
/* This indicates a data error */
- WARN(1, "clock: Could not find fieldval %d for clock %s parent "
- "%s\n", field_val, clk->name, clk->parent->name);
+ WARN(1, "clock: %s: could not find fieldval %d parent %s\n",
+ clk->name, field_val, clk->parent->name);
return 0;
}
}
if (!clkr->div) {
- pr_err("clock: Could not find divisor %d for clock %s parent "
- "%s\n", div, clk->name, clk->parent->name);
+ pr_err("clock: %s: could not find divisor %d parent %s\n",
+ clk->name, div, clk->parent->name);
return ~0;
}
/* Sanity check */
if (clkr->div <= last_div)
- pr_err("clock: clksel_rate table not sorted "
- "for clock %s", clk->name);
+ pr_err("clock: %s: clksel_rate table not sorted",
+ clk->name);
last_div = clkr->div;
}
if (!clkr->div) {
- pr_err("clock: Could not find divisor for target "
- "rate %ld for clock %s parent %s\n", target_rate,
- clk->name, clk->parent->name);
+ pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n",
+ clk->name, target_rate, clk->parent->name);
return ~0;
}
if (clkr->val == r) {
if (clk->parent != clks->parent) {
- pr_debug("clock: inited %s parent "
- "to %s (was %s)\n",
+ pr_debug("clock: %s: inited parent to %s (was %s)\n",
clk->name, clks->parent->name,
((clk->parent) ?
clk->parent->name : "NULL"));
#include <asm/div64.h>
#include <plat/clock.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
}
if (fint < fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, "
- "lowering max_divider\n", n);
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
} else if (fint > fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, "
- "boosting min_divider\n", n);
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
- } else if (cpu_is_omap44xx()) {
+ } else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return dd->clk_bypass->rate;
- } else if (cpu_is_omap44xx()) {
+ } else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <trace/events/power.h>
#include <asm/cpu.h>
+
#include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <trace/events/power.h>
+
+#include "soc.h"
+#include "clockdomain.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
clk->name, clk->clkdm_name);
clk->clkdm = clkdm;
} else {
- pr_debug("clock: could not associate clk %s to "
- "clkdm %s\n", clk->name, clk->clkdm_name);
+ pr_debug("clock: could not associate clk %s to clkdm %s\n",
+ clk->name, clk->clkdm_name);
}
}
* 'Independent' here refers to a clock which is not
* controlled by its parent.
*/
- printk(KERN_ERR "clock: clk_disable called on independent "
- "clock %s which has no enable_reg\n", clk->name);
+ pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
return;
}
void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount == 0) {
- WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
- "already 0?", clk->name);
+ WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
return;
}
if (clkdm_control && clk->clkdm) {
ret = clkdm_clk_enable(clk->clkdm, clk);
if (ret) {
- WARN(1, "clock: %s: could not enable clockdomain %s: "
- "%d\n", clk->name, clk->clkdm->name, ret);
+ WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
+ clk->name, clk->clkdm->name, ret);
goto oce_err2;
}
}
hfclkin_rate = clk_get_rate(hfclkin_ck);
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (hfclkin_rate / 1000000),
- ((hfclkin_rate / 100000) % 10),
+ pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+ (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X),
+ CLK("twl", "fck", &osc_ck, CK_243X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
+ CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX),
CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
+ CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX),
CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX),
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
- CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX),
- CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX),
- CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX),
- CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX),
- CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX),
- CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX),
- CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX),
+ CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
+ CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
+ CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
+ CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
+ CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
+ CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
+ CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
#include "prm2xxx_3xxx.h"
* on DPLL4.
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
- pr_err("clock: DPLL4 cannot change rate due to "
- "silicon 'Limitation 2.5' on 3430ES1.\n");
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
#include <linux/list.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
+ CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
if (IS_ERR(autodep->clkdm.ptr))
continue;
- pr_debug("clockdomain: adding %s sleepdep/wkdep for "
- "clkdm %s\n", autodep->clkdm.ptr->name,
- clkdm->name);
+ pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
+ clkdm->name, autodep->clkdm.ptr->name);
clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
if (IS_ERR(autodep->clkdm.ptr))
continue;
- pr_debug("clockdomain: removing %s sleepdep/wkdep for "
- "clkdm %s\n", autodep->clkdm.ptr->name,
- clkdm->name);
+ pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
+ clkdm->name, autodep->clkdm.ptr->name);
clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
- pr_debug("clockdomain: hardware will wake up %s when %s wakes "
- "up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
}
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
- pr_debug("clockdomain: hardware will no longer wake up %s "
- "after %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
}
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
- pr_debug("clockdomain: will prevent %s from sleeping if %s "
- "is active\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
}
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
- pr_debug("clockdomain: will no longer prevent %s from "
- "sleeping if %s is active\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
}
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- pr_debug("clockdomain: %s does not support forcing "
- "sleep via software\n", clkdm->name);
+ pr_debug("clockdomain: %s does not support forcing sleep via software\n",
+ clkdm->name);
return -EINVAL;
}
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- pr_debug("clockdomain: %s does not support forcing "
- "wakeup via software\n", clkdm->name);
+ pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
+ clkdm->name);
return -EINVAL;
}
return;
if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
- pr_debug("clock: automatic idle transitions cannot be enabled "
- "on clockdomain %s\n", clkdm->name);
+ pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
+ clkdm->name);
return;
}
return;
if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
- pr_debug("clockdomain: automatic idle transitions cannot be "
- "disabled on %s\n", clkdm->name);
+ pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
+ clkdm->name);
return;
}
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
- pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+ pr_debug("clockdomain: %s: enabled\n", clkdm->name);
return 0;
}
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
- pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+ pr_debug("clockdomain: %s: disabled\n", clkdm->name);
return 0;
}
_clkdm_del_autodeps(clkdm);
}
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_add_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_del_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_wakeup = omap3_clkdm_wakeup,
.clkdm_allow_idle = omap3_clkdm_allow_idle,
.clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_MASK (1 << 0)
/* CM_IDLEST_PLL_IVA2 */
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <plat/mcspi.h>
-#include <plat/nand.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include "common.h"
#include "common-board-devices.h"
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
}
if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
+ pr_info("NAND: Unable to find configuration in GPMC\n");
return;
}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
#include <plat/clock.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "sdrc.h"
#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
#ifndef __ASSEMBLER__
+#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
-#include <plat/common.h>
+
#include <asm/proc-fns.h>
+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+
+#define OMAP_INTC_START NR_IRQS
+
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
#else
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
+
+extern void omap4_cpu_die(unsigned int cpu);
+
+extern struct smp_operations omap4_smp_ops;
+
extern void omap5_secondary_startup(void);
#endif
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include "ctrl_module_core_44xx.h"
+#include "ctrl_module_wkup_44xx.h"
+#include "ctrl_module_pad_core_44xx.h"
+#include "ctrl_module_pad_wkup_44xx.h"
-#include <plat/am33xx.h>
+#include "am33xx.h"
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
#include <linux/cpu_pm.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
--- /dev/null
+/*
+ * OMAP44xx CTRL_MODULE_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_CORE 0x4a002000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
+#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
+#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
+#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
+#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
+#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
+#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
+#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
+#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
+#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT 30
+#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT 16
+#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT 11
+#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT 8
+#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT 6
+#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT 0
+#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT 0
+#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
+
+/* STD_FUSE_DIE_ID_0 */
+#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
+#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
+
+/* ID_CODE */
+#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
+#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_1 */
+#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
+#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_2 */
+#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
+#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_3 */
+#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
+#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_0 */
+#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
+#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_1 */
+#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
+#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
+
+/* STD_FUSE_USB_CONF */
+#define OMAP4_USB_PROD_ID_SHIFT 16
+#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
+#define OMAP4_USB_VENDOR_ID_SHIFT 0
+#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
+
+/* STD_FUSE_OPP_VDD_WKUP */
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
+
+/* STD_FUSE_OPP_BGAP */
+#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
+#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_0 */
+#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
+#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_1 */
+#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
+#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
+
+/* STATUS */
+#define OMAP4_ATTILA_CONF_SHIFT 11
+#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
+#define OMAP4_DEVICE_TYPE_SHIFT 8
+#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
+#define OMAP4_SYS_BOOT_SHIFT 0
+#define OMAP4_SYS_BOOT_MASK (0xff << 0)
+
+/* DEV_CONF */
+#define OMAP4_DEV_CONF_SHIFT 1
+#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
+#define OMAP4_USBPHY_PD_SHIFT 0
+#define OMAP4_USBPHY_PD_MASK (1 << 0)
+
+/* LDOVBB_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
+
+/* LDOVBB_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
+
+/* LDOSRAM_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
+
+/* LDOSRAM_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
+
+/* LDOSRAM_CORE_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
+
+/* TEMP_SENSOR */
+#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
+#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
+#define OMAP4_BGAP_TSHUT_SHIFT 11
+#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
+
+/* DPLL_NWELL_TRIM_0 */
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
+#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
+#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
+#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
+
+/* DPLL_NWELL_TRIM_1 */
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
+#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
+#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
+
+/* USBOTGHS_CONTROL */
+#define OMAP4_DISCHRGVBUS_SHIFT 8
+#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
+#define OMAP4_CHRGVBUS_SHIFT 7
+#define OMAP4_CHRGVBUS_MASK (1 << 7)
+#define OMAP4_DRVVBUS_SHIFT 6
+#define OMAP4_DRVVBUS_MASK (1 << 6)
+#define OMAP4_IDPULLUP_SHIFT 5
+#define OMAP4_IDPULLUP_MASK (1 << 5)
+#define OMAP4_IDDIG_SHIFT 4
+#define OMAP4_IDDIG_MASK (1 << 4)
+#define OMAP4_SESSEND_SHIFT 3
+#define OMAP4_SESSEND_MASK (1 << 3)
+#define OMAP4_VBUSVALID_SHIFT 2
+#define OMAP4_VBUSVALID_MASK (1 << 2)
+#define OMAP4_BVALID_SHIFT 1
+#define OMAP4_BVALID_MASK (1 << 1)
+#define OMAP4_AVALID_SHIFT 0
+#define OMAP4_AVALID_MASK (1 << 0)
+
+/* DSS_CONTROL */
+#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
+#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
+
+/* HWOBS_CONTROL */
+#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
+#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
+#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
+#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
+#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
+#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
+#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
+#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
+
+/* DEBOBS_FINAL_MUX_SEL */
+#define OMAP4_SELECT_SHIFT 0
+#define OMAP4_SELECT_MASK (0xffffffff << 0)
+
+/* DEBOBS_MMR_MPU */
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
+
+/* CONF_SDMA_REQ_SEL0 */
+#define OMAP4_MULT_SHIFT 0
+#define OMAP4_MULT_MASK (0x7f << 0)
+
+/* CONF_CLK_SEL0 */
+#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
+#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
+
+/* CONF_CLK_SEL1 */
+#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
+#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
+
+/* CONF_CLK_SEL2 */
+#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
+#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
+
+/* CONF_DPLL_FREQLOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
+
+/* CONF_DPLL_TINITZ_SEL */
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
+
+/* CONF_DPLL_PHASELOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_MODE_SHIFT 0
+#define OMAP4_MODE_MASK (0xf << 0)
+
+#endif
--- /dev/null
+/*
+ * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT 30
+#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT 16
+#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT 11
+#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT 8
+#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT 6
+#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT 0
+#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT 0
+#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_1 */
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_2 */
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_3 */
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_4 */
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_5 */
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* PADCONF_WAKEUPEVENT_6 */
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* CONTROL_PADCONF_GLOBAL */
+#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
+#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_BANK0_SHIFT 31
+#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
+#define OMAP4_VDDS_DV_BANK1_SHIFT 30
+#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
+#define OMAP4_VDDS_DV_BANK3_SHIFT 29
+#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
+#define OMAP4_VDDS_DV_BANK4_SHIFT 28
+#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
+#define OMAP4_VDDS_DV_BANK5_SHIFT 27
+#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
+#define OMAP4_VDDS_DV_BANK6_SHIFT 26
+#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
+#define OMAP4_VDDS_DV_C2C_SHIFT 25
+#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
+#define OMAP4_VDDS_DV_CAM_SHIFT 24
+#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
+#define OMAP4_VDDS_DV_GPMC_SHIFT 23
+#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
+#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
+#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
+
+/* CONTROL_SMART1IO_PADCONF_0 */
+#define OMAP4_ABE_DR0_SC_SHIFT 30
+#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
+#define OMAP4_CAM_DR0_SC_SHIFT 28
+#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
+#define OMAP4_FREF_DR2_SC_SHIFT 26
+#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
+#define OMAP4_FREF_DR3_SC_SHIFT 24
+#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
+#define OMAP4_GPIO_DR8_SC_SHIFT 22
+#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
+#define OMAP4_GPIO_DR9_SC_SHIFT 20
+#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
+#define OMAP4_GPMC_DR2_SC_SHIFT 18
+#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
+#define OMAP4_GPMC_DR3_SC_SHIFT 16
+#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
+#define OMAP4_GPMC_DR6_SC_SHIFT 14
+#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
+#define OMAP4_HDMI_DR0_SC_SHIFT 12
+#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
+#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
+#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
+#define OMAP4_UART1_DR0_SC_SHIFT 8
+#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
+#define OMAP4_UART3_DR0_SC_SHIFT 6
+#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
+#define OMAP4_UART3_DR1_SC_SHIFT 4
+#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
+#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
+#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
+#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
+#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
+
+/* CONTROL_SMART1IO_PADCONF_1 */
+#define OMAP4_ABE_DR0_LB_SHIFT 30
+#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
+#define OMAP4_CAM_DR0_LB_SHIFT 28
+#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
+#define OMAP4_FREF_DR2_LB_SHIFT 26
+#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
+#define OMAP4_FREF_DR3_LB_SHIFT 24
+#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
+#define OMAP4_GPIO_DR8_LB_SHIFT 22
+#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
+#define OMAP4_GPIO_DR9_LB_SHIFT 20
+#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
+#define OMAP4_GPMC_DR2_LB_SHIFT 18
+#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
+#define OMAP4_GPMC_DR3_LB_SHIFT 16
+#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
+#define OMAP4_GPMC_DR6_LB_SHIFT 14
+#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
+#define OMAP4_HDMI_DR0_LB_SHIFT 12
+#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
+#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
+#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
+#define OMAP4_UART1_DR0_LB_SHIFT 8
+#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
+#define OMAP4_UART3_DR0_LB_SHIFT 6
+#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
+#define OMAP4_UART3_DR1_LB_SHIFT 4
+#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
+#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
+#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
+#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
+#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
+
+/* CONTROL_SMART2IO_PADCONF_0 */
+#define OMAP4_C2C_DR0_LB_SHIFT 31
+#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
+#define OMAP4_DPM_DR1_LB_SHIFT 30
+#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
+#define OMAP4_DPM_DR2_LB_SHIFT 29
+#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
+#define OMAP4_DPM_DR3_LB_SHIFT 28
+#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
+#define OMAP4_GPIO_DR0_LB_SHIFT 27
+#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
+#define OMAP4_GPIO_DR1_LB_SHIFT 26
+#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
+#define OMAP4_GPIO_DR10_LB_SHIFT 25
+#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
+#define OMAP4_GPIO_DR2_LB_SHIFT 24
+#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
+#define OMAP4_GPMC_DR0_LB_SHIFT 23
+#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
+#define OMAP4_GPMC_DR1_LB_SHIFT 22
+#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
+#define OMAP4_GPMC_DR4_LB_SHIFT 21
+#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
+#define OMAP4_GPMC_DR5_LB_SHIFT 20
+#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
+#define OMAP4_GPMC_DR7_LB_SHIFT 19
+#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
+#define OMAP4_HSI2_DR0_LB_SHIFT 18
+#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
+#define OMAP4_HSI2_DR1_LB_SHIFT 17
+#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
+#define OMAP4_HSI2_DR2_LB_SHIFT 16
+#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
+#define OMAP4_KPD_DR0_LB_SHIFT 15
+#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
+#define OMAP4_KPD_DR1_LB_SHIFT 14
+#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
+#define OMAP4_PDM_DR0_LB_SHIFT 13
+#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
+#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
+#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
+#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
+#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
+#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
+#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
+#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
+#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
+#define OMAP4_SPI3_DR0_LB_SHIFT 8
+#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
+#define OMAP4_SPI3_DR1_LB_SHIFT 7
+#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
+#define OMAP4_UART3_DR2_LB_SHIFT 6
+#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
+#define OMAP4_UART3_DR3_LB_SHIFT 5
+#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
+#define OMAP4_UART3_DR4_LB_SHIFT 4
+#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
+#define OMAP4_UART3_DR5_LB_SHIFT 3
+#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
+#define OMAP4_USBA0_DR1_LB_SHIFT 2
+#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
+#define OMAP4_USBA_DR2_LB_SHIFT 1
+#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
+
+/* CONTROL_SMART2IO_PADCONF_1 */
+#define OMAP4_USBB1_DR0_LB_SHIFT 31
+#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
+#define OMAP4_USBB2_DR0_LB_SHIFT 30
+#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
+#define OMAP4_USBA0_DR0_LB_SHIFT 29
+#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
+
+/* CONTROL_SMART3IO_PADCONF_0 */
+#define OMAP4_DMIC_DR0_MB_SHIFT 30
+#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
+#define OMAP4_GPIO_DR3_MB_SHIFT 28
+#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
+#define OMAP4_GPIO_DR4_MB_SHIFT 26
+#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
+#define OMAP4_GPIO_DR5_MB_SHIFT 24
+#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
+#define OMAP4_GPIO_DR6_MB_SHIFT 22
+#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
+#define OMAP4_HSI_DR1_MB_SHIFT 20
+#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
+#define OMAP4_HSI_DR2_MB_SHIFT 18
+#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
+#define OMAP4_HSI_DR3_MB_SHIFT 16
+#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
+#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
+#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
+#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
+#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
+#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
+#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
+#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
+#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
+#define OMAP4_SPI2_DR0_MB_SHIFT 0
+#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
+
+/* CONTROL_SMART3IO_PADCONF_1 */
+#define OMAP4_SPI2_DR1_MB_SHIFT 30
+#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
+#define OMAP4_SPI2_DR2_MB_SHIFT 28
+#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
+#define OMAP4_UART2_DR0_MB_SHIFT 26
+#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
+#define OMAP4_UART2_DR1_MB_SHIFT 24
+#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
+#define OMAP4_UART4_DR0_MB_SHIFT 22
+#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
+#define OMAP4_HSI_DR0_MB_SHIFT 20
+#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
+
+/* CONTROL_SMART3IO_PADCONF_2 */
+#define OMAP4_DMIC_DR0_LB_SHIFT 31
+#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
+#define OMAP4_GPIO_DR3_LB_SHIFT 30
+#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
+#define OMAP4_GPIO_DR4_LB_SHIFT 29
+#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
+#define OMAP4_GPIO_DR5_LB_SHIFT 28
+#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
+#define OMAP4_GPIO_DR6_LB_SHIFT 27
+#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
+#define OMAP4_HSI_DR1_LB_SHIFT 26
+#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
+#define OMAP4_HSI_DR2_LB_SHIFT 25
+#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
+#define OMAP4_HSI_DR3_LB_SHIFT 24
+#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
+#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
+#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
+#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
+#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
+#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
+#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
+#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
+#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
+#define OMAP4_SPI2_DR0_LB_SHIFT 16
+#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
+#define OMAP4_SPI2_DR1_LB_SHIFT 15
+#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
+#define OMAP4_SPI2_DR2_LB_SHIFT 14
+#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
+#define OMAP4_UART2_DR0_LB_SHIFT 13
+#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
+#define OMAP4_UART2_DR1_LB_SHIFT 12
+#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
+#define OMAP4_UART4_DR0_LB_SHIFT 11
+#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
+#define OMAP4_HSI_DR0_LB_SHIFT 10
+#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
+
+/* CONTROL_USBB_HSIC */
+#define OMAP4_USBB2_DR1_SR_SHIFT 30
+#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
+#define OMAP4_USBB2_DR1_I_SHIFT 27
+#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
+#define OMAP4_USBB1_DR1_SR_SHIFT 25
+#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
+#define OMAP4_USBB1_DR1_I_SHIFT 22
+#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
+#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
+#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
+#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
+#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
+#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
+#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
+#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
+#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
+
+/* CONTROL_SLIMBUS */
+#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
+#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
+#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
+#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
+#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
+#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
+#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
+#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
+#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
+#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
+#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
+#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
+#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
+#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
+#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
+#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
+
+/* CONTROL_PBIASLITE */
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
+#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
+#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
+#define OMAP4_MMC1_PWRDNZ_SHIFT 26
+#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
+#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
+#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
+
+/* CONTROL_I2C_0 */
+#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
+#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
+#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
+#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
+#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
+#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
+#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
+#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
+#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
+#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
+#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
+#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
+#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
+#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
+#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
+#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
+#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
+#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
+#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
+#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
+#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
+#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
+#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
+#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
+#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
+#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
+#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
+#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
+#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
+#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
+#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
+#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
+#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
+#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
+#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
+#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
+#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
+#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
+#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
+#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
+#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
+#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
+#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
+#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
+#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
+#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
+#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
+#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
+
+/* CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
+
+/* CONTROL_AVDAC */
+#define OMAP4_AVDAC_ACEN_SHIFT 31
+#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
+#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
+#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
+#define OMAP4_AVDAC_INPUTINV_SHIFT 29
+#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
+#define OMAP4_AVDAC_CTL_SHIFT 13
+#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
+#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
+#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
+
+/* CONTROL_HDMI_TX_PHY */
+#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
+#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
+#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
+#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
+
+/* CONTROL_MMC2 */
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
+
+/* CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT 29
+#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT 24
+#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT 19
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT 14
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+
+/* CONTROL_MCBSPLP */
+#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
+#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
+#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
+#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
+#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
+#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
+
+/* CONTROL_USB2PHYCORE */
+#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
+#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
+#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
+#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
+#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
+#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
+#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
+#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
+#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
+#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
+#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
+#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
+#define OMAP4_USB2PHY_DATADET_SHIFT 18
+#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
+#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
+#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
+#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
+#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
+#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
+#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
+#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
+#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
+#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
+#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
+#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
+#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
+#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
+#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
+#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
+#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
+#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
+#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
+#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
+#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
+#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
+#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
+#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
+#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
+
+/* CONTROL_I2C_1 */
+#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
+#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
+#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
+#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
+#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
+#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
+#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
+#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
+#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
+#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
+#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
+#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
+
+/* CONTROL_MMC1 */
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
+#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
+#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
+#define OMAP4_USB_FD_CDEN_SHIFT 23
+#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
+
+/* CONTROL_HSI */
+#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
+#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
+#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
+#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
+#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
+#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
+#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
+#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
+
+/* CONTROL_USB */
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
+
+/* CONTROL_HDQ */
+#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
+#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
+
+/* CONTROL_LPDDR2IO1_0 */
+#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
+#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
+#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
+#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
+#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
+#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
+#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
+#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
+#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
+#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
+#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
+#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
+#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_1 */
+#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
+#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
+#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
+#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
+#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
+#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
+#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
+#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
+#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
+#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
+#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
+#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
+#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_2 */
+#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
+#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
+#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
+#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
+#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
+#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
+#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
+#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
+#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
+#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
+
+/* CONTROL_LPDDR2IO1_3 */
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
+#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
+#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
+#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
+#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
+
+/* CONTROL_LPDDR2IO2_0 */
+#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
+#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
+#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
+#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
+#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
+#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
+#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
+#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
+#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
+#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
+#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
+#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
+#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_1 */
+#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
+#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
+#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
+#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
+#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
+#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
+#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
+#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
+#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
+#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
+#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
+#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
+#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_2 */
+#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
+#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
+#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
+#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
+#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
+#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
+#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
+#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
+#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
+#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
+
+/* CONTROL_LPDDR2IO2_3 */
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
+#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
+#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
+#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
+#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
+
+/* CONTROL_BUS_HOLD */
+#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
+#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
+#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
+#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
+
+/* CONTROL_C2C */
+#define OMAP4_MIRROR_MODE_EN_SHIFT 31
+#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
+#define OMAP4_C2C_SPARE_SHIFT 24
+#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
+
+/* CORE_CONTROL_SPARE_RW */
+#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
+#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R */
+#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
+#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R_C0 */
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
+
+/* CONTROL_EFUSE_1 */
+#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
+#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
+#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
+#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
+#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
+#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
+#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
+#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
+
+/* CONTROL_EFUSE_2 */
+#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
+#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
+#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
+#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
+#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
+#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
+#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
+#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
+#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
+#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
+#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
+#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
+#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
+#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
+#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
+#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
+#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
+#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
+#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
+#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
+#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
+#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
+#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
+#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
+#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
+#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
+#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
+#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
+#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
+#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
+#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
+#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
+#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
+#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
+#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
+#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
+
+/* CONTROL_EFUSE_3 */
+#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
+#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
+#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
+#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
+#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
+
+/* CONTROL_EFUSE_4 */
+#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
+#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
+#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
+#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
+#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
+
+#endif
--- /dev/null
+/*
+ * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
+#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT 30
+#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT 16
+#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT 11
+#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT 8
+#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT 6
+#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT 0
+#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT 0
+#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_0 */
+#define OMAP4_FREF_DR0_SC_SHIFT 30
+#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
+#define OMAP4_FREF_DR1_SC_SHIFT 28
+#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
+#define OMAP4_FREF_DR4_SC_SHIFT 26
+#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
+#define OMAP4_FREF_DR5_SC_SHIFT 24
+#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
+#define OMAP4_FREF_DR6_SC_SHIFT 22
+#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
+#define OMAP4_FREF_DR7_SC_SHIFT 20
+#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
+#define OMAP4_GPIO_DR7_SC_SHIFT 18
+#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
+#define OMAP4_DPM_DR0_SC_SHIFT 14
+#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
+#define OMAP4_SIM_DR0_SC_SHIFT 12
+#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_1 */
+#define OMAP4_FREF_DR0_LB_SHIFT 30
+#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
+#define OMAP4_FREF_DR1_LB_SHIFT 28
+#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
+#define OMAP4_FREF_DR4_LB_SHIFT 26
+#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
+#define OMAP4_FREF_DR5_LB_SHIFT 24
+#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
+#define OMAP4_FREF_DR6_LB_SHIFT 22
+#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
+#define OMAP4_FREF_DR7_LB_SHIFT 20
+#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
+#define OMAP4_GPIO_DR7_LB_SHIFT 18
+#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
+#define OMAP4_DPM_DR0_LB_SHIFT 14
+#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
+#define OMAP4_SIM_DR0_LB_SHIFT 12
+#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_FREF_SHIFT 31
+#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
+#define OMAP4_VDDS_DV_BANK2_SHIFT 30
+#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
+
+/* CONTROL_XTAL_OSCILLATOR */
+#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
+#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
+#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
+#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
+
+/* CONTROL_USIMIO */
+#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
+#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
+#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
+#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
+#define OMAP4_USIM_PWRDNZ_SHIFT 28
+#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
+
+/* CONTROL_I2C_2 */
+#define OMAP4_SR_SDA_GLFENB_SHIFT 31
+#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
+#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
+#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
+#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
+#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
+#define OMAP4_SR_SCL_GLFENB_SHIFT 27
+#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
+#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
+#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
+#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
+#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
+
+/* CONTROL_JTAG */
+#define OMAP4_JTAG_NTRST_EN_SHIFT 31
+#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
+#define OMAP4_JTAG_TCK_EN_SHIFT 30
+#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
+#define OMAP4_JTAG_RTCK_EN_SHIFT 29
+#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
+#define OMAP4_JTAG_TDI_EN_SHIFT 28
+#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
+#define OMAP4_JTAG_TDO_EN_SHIFT 27
+#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
+
+/* CONTROL_SYS */
+#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
+#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
+
+/* WKUP_CONTROL_SPARE_RW */
+#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
+#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R */
+#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
+#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R_C0 */
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
+
+#endif
--- /dev/null
+/*
+ * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_WKUP 0x4a30c000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION 0x0000
+#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO 0x0004
+#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG 0x0010
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0 0x0460
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1 0x0464
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2 0x0468
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3 0x046c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4 0x0470
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5 0x0474
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6 0x0478
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7 0x047c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8 0x0480
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9 0x0484
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10 0x0488
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11 0x048c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12 0x0490
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13 0x0494
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14 0x0498
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15 0x049c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16 0x04a0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17 0x04a4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18 0x04a8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19 0x04ac
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20 0x04b0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21 0x04b4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22 0x04b8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23 0x04bc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24 0x04c0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25 0x04c4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26 0x04c8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27 0x04cc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28 0x04d0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29 0x04d4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30 0x04d8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31 0x04dc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT 30
+#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT 16
+#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT 11
+#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT 8
+#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT 6
+#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT 0
+#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT 0
+#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_WKUP_MODE_SHIFT 0
+#define OMAP4_WKUP_MODE_MASK (1 << 0)
+
+#endif
--- /dev/null
+#ifndef _OMAP_DEBUG_DEVICES_H
+#define _OMAP_DEBUG_DEVICES_H
+
+#include <linux/types.h>
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/pmu.h>
#include "iomap.h"
-#include <plat/board.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
+#include "soc.h"
+#include "common.h"
#include "mux.h"
#include "control.h"
#include "devices.h"
.flags = IORESOURCE_MEM,
},
{
- .start = INT_24XX_CAM_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
.flags = IORESOURCE_MEM,
},
{
- .start = INT_34XX_CAM_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
#endif
static struct resource omap2_pmu_resource = {
- .start = 3,
- .end = 3,
+ .start = 3 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
};
static struct resource omap3_pmu_resource = {
- .start = INT_34XX_BENCH_MPU_EMUL,
- .end = INT_34XX_BENCH_MPU_EMUL,
+ .start = 3 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
};
static struct platform_device omap_pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = 1,
};
.flags = IORESOURCE_MEM,
},
{
- .start = INT_24XX_SHA1MD5,
+ .start = 51 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
.flags = IORESOURCE_MEM,
},
{
- .start = INT_34XX_SHA1MD52_IRQ,
+ .start = 49 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
{
static int __init omap2_init_devices(void)
{
+ /* Enable dummy states for those platforms without pinctrl support */
+ if (!of_have_populated_dt())
+ pinctrl_provide_dummies();
+
/*
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
* Set jitter correction. No jitter correction for OMAP4 and 3630
* since freqsel field is no longer present
*/
- if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+ if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
v = __raw_readl(dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
return -EINVAL;
/* No freqsel on OMAP4 and OMAP3630 */
- if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+ if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
if (!freqsel)
while (pclk && !pclk->dpll_data)
pclk = pclk->parent;
- /* clk does not have a DPLL as a parent? */
- WARN_ON(!pclk);
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return 0;
+ }
dd = pclk->dpll_data;
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock44xx.h"
#include "cm-regbits-44xx.h"
#include <plat/omap-pm.h>
#endif
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
static struct platform_device *omap_dsp_pdev;
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
MODULE_LICENSE("GPL");
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
+ kfree(pdata);
return -ENOMEM;
}
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach/flash.h>
-#include <plat/cpu.h>
-#include <plat/nand.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
-static struct resource gpmc_nand_resource = {
- .flags = IORESOURCE_MEM,
+#include "soc.h"
+
+static struct resource gpmc_nand_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device gpmc_nand_device = {
.name = "omap2-nand",
.id = 0,
- .num_resources = 1,
- .resource = &gpmc_nand_resource,
+ .num_resources = ARRAY_SIZE(gpmc_nand_resource),
+ .resource = gpmc_nand_resource,
};
static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
gpmc_cs_configure(gpmc_nand_data->cs,
GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+ gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
- &gpmc_nand_data->phys_base);
+ (unsigned long *)&gpmc_nand_resource[0].start);
if (err < 0) {
dev_err(dev, "Cannot request GPMC CS\n");
return err;
}
+ gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+ NAND_IO_SIZE - 1;
+
+ gpmc_nand_resource[1].start =
+ gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+ gpmc_nand_resource[2].start =
+ gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
/* Set timings in GPMC */
err = omap2_nand_gpmc_retime(gpmc_nand_data);
if (err < 0) {
gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
}
+ gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
#include <linux/platform_device.h>
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/mach/flash.h>
-#include <plat/cpu.h>
-#include <plat/onenand.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
+#include "soc.h"
+
+#define ONENAND_IO_SIZE SZ_128K
+
static struct omap_onenand_platform_data *gpmc_onenand_data;
+static struct resource gpmc_onenand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
static struct platform_device gpmc_onenand_device = {
.name = "omap2-onenand",
.id = -1,
+ .num_resources = 1,
+ .resource = &gpmc_onenand_resource,
};
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
{
+ int err;
+
gpmc_onenand_data = _onenand_data;
gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
+ err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+ (unsigned long *)&gpmc_onenand_resource.start);
+ if (err < 0) {
+ pr_err("%s: Cannot request GPMC CS\n", __func__);
+ return;
+ }
+
+ gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+ ONENAND_IO_SIZE - 1;
+
if (platform_device_register(&gpmc_onenand_device) < 0) {
- printk(KERN_ERR "Unable to register OneNAND device\n");
+ pr_err("%s: Unable to register OneNAND device\n", __func__);
+ gpmc_cs_free(gpmc_onenand_data->cs);
return;
}
}
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
+
+#include "soc.h"
static struct omap_smc91x_platform_data *gpmc_cfg;
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct resource gpmc_smsc911x_resources[] = {
[0] = {
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+ int id;
+ int cs;
+ int gpio_irq;
+ int gpio_reset;
+ u32 flags;
+};
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
#include <asm/mach-types.h>
#include <plat/gpmc.h>
+#include <plat/cpu.h>
+#include <plat/gpmc.h>
#include <plat/sdrc.h>
+#include "soc.h"
+#include "common.h"
+
/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE 2
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define GPMC_NR_IRQ 2
+
+struct gpmc_client_irq {
+ unsigned irq;
+ u32 bitmask;
+};
+
/* Structure to save gpmc cs context */
struct gpmc_cs_config {
u32 config1;
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
};
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
+
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
div = gpmc_cs_calc_divider(cs, t->sync_clk);
if (div < 0)
- return -1;
+ return div;
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
}
EXPORT_SYMBOL(gpmc_prefetch_reset);
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+ reg->gpmc_status = gpmc_base + GPMC_STATUS;
+ reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+ reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+ reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+ reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+ reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+ reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+ reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+ reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+ reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+ reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+ int i;
+
+ if (hweight32(irq_config) > 1)
+ return 0;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (gpmc_client_irq[i].bitmask & irq_config)
+ return gpmc_client_irq[i].irq;
+
+ return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+ int i;
+ u32 regval;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (irq == gpmc_client_irq[i].irq) {
+ regval = gpmc_read_reg(GPMC_IRQENABLE);
+ if (endis)
+ regval |= gpmc_client_irq[i].bitmask;
+ else
+ regval &= ~gpmc_client_irq[i].bitmask;
+ gpmc_write_reg(GPMC_IRQENABLE, regval);
+ break;
+ }
+
+ return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(int gpmc_irq)
+{
+ int i;
+ u32 regval;
+
+ if (!gpmc_irq)
+ return -EINVAL;
+
+ gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+ if (IS_ERR_VALUE(gpmc_irq_start)) {
+ pr_err("irq_alloc_descs failed\n");
+ return gpmc_irq_start;
+ }
+
+ gpmc_irq_chip.name = "gpmc";
+ gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+ gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+ gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+ gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+ gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+ gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+ gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+ gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+ gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++) {
+ gpmc_client_irq[i].irq = gpmc_irq_start + i;
+ irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+ &gpmc_irq_chip, handle_simple_irq);
+ set_irq_flags(gpmc_client_irq[i].irq,
+ IRQF_VALID | IRQF_NOAUTOEN);
+ }
+
+ /* Disable interrupts */
+ gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+ /* clear interrupts */
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+ return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
static void __init gpmc_mem_init(void)
{
int cs;
static int __init gpmc_init(void)
{
- u32 l, irq;
- int cs, ret = -EINVAL;
+ u32 l;
+ int ret = -EINVAL;
int gpmc_irq;
char *ck = NULL;
l = OMAP2420_GPMC_BASE;
else
l = OMAP34XX_GPMC_BASE;
- gpmc_irq = INT_34XX_GPMC_IRQ;
+ gpmc_irq = 20 + OMAP_INTC_START;
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
- gpmc_irq = INT_34XX_GPMC_IRQ;
+ gpmc_irq = 20 + OMAP_INTC_START;
} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
/* Base address and irq number are same for OMAP4/5 */
ck = "gpmc_ck";
l = OMAP44XX_GPMC_BASE;
- gpmc_irq = OMAP44XX_IRQ_GPMC;
+ gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
}
if (WARN_ON(!ck))
gpmc_write_reg(GPMC_SYSCONFIG, l);
gpmc_mem_init();
- /* initalize the irq_chained */
- irq = OMAP_GPMC_IRQ_BASE;
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
- irq_set_chip_and_handler(irq, &dummy_irq_chip,
- handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- irq++;
- }
-
- ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
+ ret = gpmc_setup_irq(gpmc_irq);
if (ret)
pr_err("gpmc: irq-%d could not claim: err %d\n",
gpmc_irq, ret);
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
{
- u8 cs;
+ int i;
+ u32 regval;
+
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+ if (!regval)
+ return IRQ_NONE;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (regval & gpmc_client_irq[i].bitmask)
+ generic_handle_irq(gpmc_client_irq[i].irq);
- /* check cs to invoke the irq */
- cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
- if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
- generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
return IRQ_HANDLED;
}
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include <plat/hdq1w.h>
+#include "hdq1w.h"
#include "common.h"
--- /dev/null
+/*
+ * Shared macros and function prototypes for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
+#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * XXX A future cleanup patch should modify
+ * drivers/w1/masters/omap_hdq.c to use these macros
+ */
+#define HDQ_CTRL_STATUS_OFFSET 0x0c
+#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT 5
+
+
+extern int omap_hdq1w_reset(struct omap_hwmod *oh);
+
+#endif
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <plat/mmc.h>
#include <plat/omap-pm.h>
-#include <plat/mux.h>
#include <plat/omap_device.h>
#include "mux.h"
*
*/
-#include <plat/cpu.h>
#include <plat/i2c.h>
#include "common.h"
#include <plat/omap_hwmod.h>
#include <asm/cputype.h>
#include "common.h"
-#include <plat/cpu.h>
-#include <mach/id.h>
+#include "id.h"
+#include "soc.h"
#include "control.h"
static unsigned int omap_revision;
}
if (j == ARRAY_SIZE(omap_ids)) {
- printk(KERN_ERR "Unknown OMAP device type. "
- "Handling it as OMAP%04x\n",
- omap_ids[i].type >> 16);
+ pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
+ omap_ids[i].type >> 16);
j = i;
}
--- /dev/null
+/*
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP2_ARCH_ID_H
+#define OMAP2_ARCH_ID_H
+
+struct omap_die_id {
+ u32 id_0;
+ u32 id_1;
+ u32 id_2;
+ u32 id_3;
+};
+
+void omap_get_die_id(struct omap_die_id *odi);
+
+#endif
+++ /dev/null
-/*:
- * Address mappings and base address for AM35XX specific interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Sriramakrishnan <srk@ti.com>
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AM35XX_H
-#define __ASM_ARCH_AM35XX_H
-
-/*
- * Base addresses
- * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
- */
-#define AM35XX_IPSS_EMAC_BASE 0x5C000000
-#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000
-#define AM35XX_IPSS_HECC_BASE 0x5C050000
-#define AM35XX_IPSS_VPFE_BASE 0x5C060000
-
-
-/* HECC module specifc offset definitions */
-#define AM35XX_HECC_SCC_HECC_OFFSET (0x0)
-#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000)
-#define AM35XX_HECC_RAM_OFFSET (0x3000)
-#define AM35XX_HECC_MBOX_OFFSET (0x2000)
-#define AM35XX_HECC_INT_LINE (0x0)
-#define AM35XX_HECC_VERSION (0x1)
-
-#define AM35XX_EMAC_CNTRL_OFFSET (0x10000)
-#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0)
-#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000)
-#define AM35XX_EMAC_MDIO_OFFSET (0x30000)
-#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \
- AM35XX_EMAC_MDIO_OFFSET)
-#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000)
-#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \
- AM3517_EMAC_CNTRL_RAM_OFFSET)
-#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000)
-
-#endif /* __ASM_ARCH_AM35XX_H */
+++ /dev/null
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
+++ /dev/null
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE 0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
-#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT 16
-#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT 0
-#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT 11
-#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT 8
-#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT 0
-#define OMAP4_SYS_BOOT_MASK (0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT 1
-#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT 0
-#define OMAP4_USBPHY_PD_MASK (1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
-#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT 11
-#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT 8
-#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT 7
-#define OMAP4_CHRGVBUS_MASK (1 << 7)
-#define OMAP4_DRVVBUS_SHIFT 6
-#define OMAP4_DRVVBUS_MASK (1 << 6)
-#define OMAP4_IDPULLUP_SHIFT 5
-#define OMAP4_IDPULLUP_MASK (1 << 5)
-#define OMAP4_IDDIG_SHIFT 4
-#define OMAP4_IDDIG_MASK (1 << 4)
-#define OMAP4_SESSEND_SHIFT 3
-#define OMAP4_SESSEND_MASK (1 << 3)
-#define OMAP4_VBUSVALID_SHIFT 2
-#define OMAP4_VBUSVALID_MASK (1 << 2)
-#define OMAP4_BVALID_SHIFT 1
-#define OMAP4_BVALID_MASK (1 << 1)
-#define OMAP4_AVALID_SHIFT 0
-#define OMAP4_AVALID_MASK (1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
-#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT 0
-#define OMAP4_SELECT_MASK (0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT 0
-#define OMAP4_MULT_MASK (0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT 0
-#define OMAP4_MODE_MASK (0xf << 0)
-
-#endif
+++ /dev/null
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
-#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT 31
-#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT 30
-#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT 29
-#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT 28
-#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT 27
-#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT 26
-#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT 25
-#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT 24
-#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT 23
-#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
-#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT 30
-#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT 28
-#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT 26
-#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT 24
-#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT 22
-#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT 20
-#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT 18
-#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT 16
-#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT 14
-#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT 12
-#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
-#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT 8
-#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT 6
-#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT 4
-#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
-#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
-#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT 30
-#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT 28
-#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT 26
-#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT 24
-#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT 22
-#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT 20
-#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT 18
-#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT 16
-#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT 14
-#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT 12
-#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
-#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT 8
-#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT 6
-#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT 4
-#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
-#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
-#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT 31
-#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT 30
-#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT 29
-#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT 28
-#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT 27
-#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT 26
-#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT 25
-#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT 24
-#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT 23
-#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT 22
-#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT 21
-#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT 20
-#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT 19
-#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT 18
-#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT 17
-#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT 16
-#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT 15
-#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT 14
-#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT 13
-#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
-#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
-#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
-#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
-#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT 8
-#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT 7
-#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT 6
-#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT 5
-#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT 4
-#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT 3
-#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT 2
-#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT 1
-#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT 31
-#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT 30
-#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT 29
-#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT 30
-#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT 28
-#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT 26
-#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT 24
-#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT 22
-#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT 20
-#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT 18
-#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT 16
-#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
-#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
-#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
-#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
-#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT 0
-#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT 30
-#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT 28
-#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT 26
-#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT 24
-#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT 22
-#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT 20
-#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT 31
-#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT 30
-#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT 29
-#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT 28
-#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT 27
-#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT 26
-#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT 25
-#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT 24
-#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
-#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
-#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
-#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT 16
-#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT 15
-#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT 14
-#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT 13
-#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT 12
-#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT 11
-#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT 10
-#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT 30
-#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT 27
-#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT 25
-#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT 22
-#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT 26
-#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
-#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
-#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
-#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
-#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
-#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
-#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
-#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
-#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT 31
-#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT 29
-#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT 13
-#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
-#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
-#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT 29
-#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT 24
-#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
-#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
-#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
-#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
-#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT 18
-#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
-#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
-#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
-#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT 23
-#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
-#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
-#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
-#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT 31
-#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT 24
-#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
-#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
-#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
-#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
-#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
-#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
-#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
-#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
-#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
-#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
-#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
-
-#endif
+++ /dev/null
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT 30
-#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT 28
-#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT 26
-#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT 24
-#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT 22
-#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT 20
-#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT 18
-#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT 14
-#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT 12
-#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT 30
-#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT 28
-#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT 26
-#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT 24
-#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT 22
-#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT 20
-#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT 18
-#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT 14
-#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT 12
-#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT 31
-#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT 30
-#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
-#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
-#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT 31
-#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT 27
-#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT 31
-#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT 30
-#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT 29
-#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT 28
-#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT 27
-#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-#endif
+++ /dev/null
-/*
- * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_WKUP 0x4a30c000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0 0x0460
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1 0x0464
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2 0x0468
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3 0x046c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4 0x0470
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5 0x0474
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6 0x0478
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7 0x047c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8 0x0480
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9 0x0484
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10 0x0488
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11 0x048c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12 0x0490
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13 0x0494
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14 0x0498
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15 0x049c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16 0x04a0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17 0x04a4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18 0x04a8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19 0x04ac
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20 0x04b0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21 0x04b4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22 0x04b8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23 0x04bc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24 0x04c0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25 0x04c4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26 0x04c8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27 0x04cc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28 0x04d0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29 0x04d4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30 0x04d8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31 0x04dc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_WKUP_MODE_SHIFT 0
-#define OMAP4_WKUP_MODE_MASK (1 << 0)
-
-#endif
/*
* arch/arm/mach-omap2/include/mach/gpio.h
*/
-
-#include <plat/gpio.h>
/*
* arch/arm/mach-omap2/include/mach/hardware.h
*/
-
-#include <plat/hardware.h>
+++ /dev/null
-/*
- * OMAP2 CPU identification code
- *
- * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP2_ARCH_ID_H
-#define OMAP2_ARCH_ID_H
-
-struct omap_die_id {
- u32 id_0;
- u32 id_1;
- u32 id_2;
- u32 id_3;
-};
-
-void omap_get_die_id(struct omap_die_id *odi);
-
-#endif
/*
* arch/arm/mach-omap2/include/mach/irqs.h
*/
-
-#include <plat/irqs.h>
+++ /dev/null
-/*
- * omap-secure.h: OMAP Secure infrastructure header.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP_SECURE_H
-#define OMAP_ARCH_OMAP_SECURE_H
-
-/* Monitor error code */
-#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE
-#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF
-
-/* HAL API error codes */
-#define API_HAL_RET_VALUE_OK 0x00
-#define API_HAL_RET_VALUE_FAIL 0x01
-
-/* Secure HAL API flags */
-#define FLAG_START_CRITICAL 0x4
-#define FLAG_IRQFIQ_MASK 0x3
-#define FLAG_IRQ_ENABLE 0x2
-#define FLAG_FIQ_ENABLE 0x1
-#define NO_FLAG 0x0
-
-/* Maximum Secure memory storage size */
-#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
-
-/* Secure low power HAL API index */
-#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
-#define OMAP4_HAL_SAVEHW_INDEX 0x1b
-#define OMAP4_HAL_SAVEALL_INDEX 0x1c
-#define OMAP4_HAL_SAVEGIC_INDEX 0x1d
-
-/* Secure Monitor mode APIs */
-#define OMAP4_MON_SCU_PWR_INDEX 0x108
-#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100
-#define OMAP4_MON_L2X0_CTRL_INDEX 0x102
-#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
-#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
-
-/* Secure PPA(Primary Protected Application) APIs */
-#define OMAP4_PPA_L2_POR_INDEX 0x23
-#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
-
-#ifndef __ASSEMBLER__
-
-extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
- u32 arg1, u32 arg2, u32 arg3, u32 arg4);
-extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
-extern phys_addr_t omap_secure_ram_mempool_base(void);
-
-#endif /* __ASSEMBLER__ */
-#endif /* OMAP_ARCH_OMAP_SECURE_H */
+++ /dev/null
-/*
- * OMAP WakeupGen header file
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_WAKEUPGEN_H
-#define OMAP_ARCH_WAKEUPGEN_H
-
-/* OMAP4 and OMAP5 has same base address */
-#define OMAP_WKUPGEN_BASE 0x48281000
-
-#define OMAP_WKG_CONTROL_0 0x00
-#define OMAP_WKG_ENB_A_0 0x10
-#define OMAP_WKG_ENB_B_0 0x14
-#define OMAP_WKG_ENB_C_0 0x18
-#define OMAP_WKG_ENB_D_0 0x1c
-#define OMAP_WKG_ENB_E_0 0x20
-#define OMAP_WKG_ENB_A_1 0x410
-#define OMAP_WKG_ENB_B_1 0x414
-#define OMAP_WKG_ENB_C_1 0x418
-#define OMAP_WKG_ENB_D_1 0x41c
-#define OMAP_WKG_ENB_E_1 0x420
-#define OMAP_AUX_CORE_BOOT_0 0x800
-#define OMAP_AUX_CORE_BOOT_1 0x804
-#define OMAP_PTMSYNCREQ_MASK 0xc00
-#define OMAP_PTMSYNCREQ_EN 0xc04
-#define OMAP_TIMESTAMPCYCLELO 0xc08
-#define OMAP_TIMESTAMPCYCLEHI 0xc0c
-
-extern int __init omap_wakeupgen_init(void);
-extern void __iomem *omap_get_wakeupgen_base(void);
-extern int omap_secure_apis_support(void);
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-omap2/include/mach/smp.h
- */
-
-#include <plat/smp.h>
#include <plat/multi.h>
#include <plat/dma.h>
+#include "soc.h"
#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
+ am33xx_hwmod_init();
+ omap_hwmod_init_postsetup();
am33xx_clk_init();
}
#endif
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS 3
+#define INTCPS_NR_IRQS 96
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
unsigned long tmp;
tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
- printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
- "(revision %ld.%ld) with %d interrupts\n",
- bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+ pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n",
+ bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS 8
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+
+/* L3 Initiator IDs */
+/* Display Sub system (DSS) */
+#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION 21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
+#define OMAP3_L4_CORE_FW_I2C2_REGION 23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
+#define OMAP3_L4_CORE_FW_I2C3_REGION 73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
+
+/* Display Sub system (DSS) */
+#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2
+
+#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104
+#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3
+#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5
+#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6
+#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7
+#endif
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
+
#include <plat/mailbox.h>
-#include <mach/irqs.h>
+
+#include "soc.h"
#define MAILBOX_REVISION 0x000
#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <mach/irqs.h>
#include <plat/dma.h>
-#include <plat/cpu.h>
-#include <plat/mcbsp.h>
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
#include <linux/kernel.h>
#include <linux/err.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
#include "common.h"
#include "powerdomain.h"
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
-void __ref platform_cpu_die(unsigned int cpu)
+void __ref omap4_cpu_die(unsigned int cpu)
{
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
#include <linux/platform_device.h>
#include <plat/iommu.h>
-#include <plat/irqs.h>
+
+#include "soc.h"
+#include "common.h"
struct iommu_device {
resource_size_t base;
static struct iommu_device omap3_devices[] = {
{
.base = 0x480bd400,
- .irq = 24,
+ .irq = 24 + OMAP_INTC_START,
.pdata = {
.name = "isp",
.nr_tlb_entries = 8,
#if defined(CONFIG_OMAP_IOMMU_IVA2)
{
.base = 0x5d000000,
- .irq = 28,
+ .irq = 28 + OMAP_INTC_START,
.pdata = {
.name = "iva2",
.nr_tlb_entries = 32,
static struct iommu_device omap4_devices[] = {
{
.base = OMAP4_MMU1_BASE,
- .irq = OMAP44XX_IRQ_DUCATI_MMU,
+ .irq = 100 + OMAP44XX_IRQ_GIC_START,
.pdata = {
.name = "ducati",
.nr_tlb_entries = 32,
},
{
.base = OMAP4_MMU2_BASE,
- .irq = OMAP44XX_IRQ_TESLA_MMU,
+ .irq = 28 + OMAP44XX_IRQ_GIC_START,
.pdata = {
.name = "tesla",
.nr_tlb_entries = 32,
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
-
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#include "pm.h"
#include "prcm_mpu44xx.h"
#include <asm/memblock.h>
#include <plat/omap-secure.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
static phys_addr_t omap_secure_memblock_base;
--- /dev/null
+/*
+ * omap-secure.h: OMAP Secure infrastructure header.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP_SECURE_H
+#define OMAP_ARCH_OMAP_SECURE_H
+
+/* Monitor error code */
+#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE
+#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF
+
+/* HAL API error codes */
+#define API_HAL_RET_VALUE_OK 0x00
+#define API_HAL_RET_VALUE_FAIL 0x01
+
+/* Secure HAL API flags */
+#define FLAG_START_CRITICAL 0x4
+#define FLAG_IRQFIQ_MASK 0x3
+#define FLAG_IRQ_ENABLE 0x2
+#define FLAG_FIQ_ENABLE 0x1
+#define NO_FLAG 0x0
+
+/* Maximum Secure memory storage size */
+#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
+
+/* Secure low power HAL API index */
+#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
+#define OMAP4_HAL_SAVEHW_INDEX 0x1b
+#define OMAP4_HAL_SAVEALL_INDEX 0x1c
+#define OMAP4_HAL_SAVEGIC_INDEX 0x1d
+
+/* Secure Monitor mode APIs */
+#define OMAP4_MON_SCU_PWR_INDEX 0x108
+#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100
+#define OMAP4_MON_L2X0_CTRL_INDEX 0x102
+#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
+#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
+
+/* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_L2_POR_INDEX 0x23
+#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
+
+#ifndef __ASSEMBLER__
+
+extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern phys_addr_t omap_secure_ram_mempool_base(void);
+
+#endif /* __ASSEMBLER__ */
+#endif /* OMAP_ARCH_OMAP_SECURE_H */
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
-#include <mach/hardware.h>
-#include <mach/omap-secure.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-secure.h"
+#include "omap-wakeupgen.h"
#include <asm/cputype.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
return scu_base;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit omap4_secondary_init(unsigned int cpu)
{
/*
* Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init omap4_smp_init_cpus(void)
{
unsigned int i = 0, ncores = 1, cpu_id;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
/*
scu_enable(scu_base);
wakeup_secondary();
}
+
+struct smp_operations omap4_smp_ops __initdata = {
+ .smp_init_cpus = omap4_smp_init_cpus,
+ .smp_prepare_cpus = omap4_smp_prepare_cpus,
+ .smp_secondary_init = omap4_secondary_init,
+ .smp_boot_secondary = omap4_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = omap4_cpu_die,
+#endif
+};
#include <asm/hardware/gic.h>
-#include <mach/omap-wakeupgen.h>
-#include <mach/omap-secure.h>
+#include "omap-wakeupgen.h"
+#include "omap-secure.h"
+#include "soc.h"
#include "omap4-sar-layout.h"
#include "common.h"
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = MAX_NR_REG_BANKS;
static unsigned int max_irqs = MAX_IRQS;
static unsigned int omap_secure_apis;
--- /dev/null
+/*
+ * OMAP WakeupGen header file
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_WAKEUPGEN_H
+#define OMAP_ARCH_WAKEUPGEN_H
+
+/* OMAP4 and OMAP5 has same base address */
+#define OMAP_WKUPGEN_BASE 0x48281000
+
+#define OMAP_WKG_CONTROL_0 0x00
+#define OMAP_WKG_ENB_A_0 0x10
+#define OMAP_WKG_ENB_B_0 0x14
+#define OMAP_WKG_ENB_C_0 0x18
+#define OMAP_WKG_ENB_D_0 0x1c
+#define OMAP_WKG_ENB_E_0 0x20
+#define OMAP_WKG_ENB_A_1 0x410
+#define OMAP_WKG_ENB_B_1 0x414
+#define OMAP_WKG_ENB_C_1 0x418
+#define OMAP_WKG_ENB_D_1 0x41c
+#define OMAP_WKG_ENB_E_1 0x420
+#define OMAP_AUX_CORE_BOOT_0 0x800
+#define OMAP_AUX_CORE_BOOT_1 0x804
+#define OMAP_PTMSYNCREQ_MASK 0xc00
+#define OMAP_PTMSYNCREQ_EN 0xc04
+#define OMAP_TIMESTAMPCYCLELO 0xc08
+#define OMAP_TIMESTAMPCYCLEHI 0xc0c
+
+extern int __init omap_wakeupgen_init(void);
+extern void __iomem *omap_get_wakeupgen_base(void);
+extern int omap_secure_apis_support(void);
+#endif
--- /dev/null
+/*
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE 0x48000000
+#define L4_WK_243X_BASE 0x49000000
+#define L3_24XX_BASE 0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE 0x40000000
+
+#define OMAP242X_CTRL_BASE L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE 0x68008000
+#define OMAP2420_GPMC_BASE 0x6800a000
+
+#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE 0x6C000000
+#define OMAP243X_SDRC_BASE 0x6D000000
+#define OMAP243X_GPMC_BASE 0x6E000000
+#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE 0x58000000
+#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE 0x5C000000
+#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
+
+#endif /* __ASM_ARCH_OMAP2_H */
+
--- /dev/null
+/*
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE 0x48000000
+#define L4_WK_34XX_BASE 0x48300000
+#define L4_PER_34XX_BASE 0x49000000
+#define L4_EMU_34XX_BASE 0x54000000
+#define L3_34XX_BASE 0x68000000
+
+#define L4_WK_AM33XX_BASE 0x44C00000
+
+#define OMAP3430_32KSYNCT_BASE 0x48320000
+#define OMAP3430_CM_BASE 0x48004800
+#define OMAP3430_PRM_BASE 0x48306800
+#define OMAP343X_SMS_BASE 0x6C000000
+#define OMAP343X_SDRC_BASE 0x6D000000
+#define OMAP34XX_GPMC_BASE 0x6E000000
+#define OMAP343X_SCM_BASE 0x48002000
+#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE 0x48200000
+
+#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0)
+#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00)
+#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70)
+#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0)
+
+#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
+#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
+#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF)
+#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7)
+#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047)
+#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F)
+#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F)
+#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
+#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
+#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
+#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
+#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
+#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
+#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
+
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE 0x480C9000
+#define OMAP34XX_SR2_BASE 0x480CB000
+
+#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
+
+/* Security */
+#define OMAP34XX_SEC_BASE (L4_34XX_BASE + 0xA0000)
+#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000)
+#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000)
+
+#endif /* __ASM_ARCH_OMAP3_H */
+
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <plat/irqs.h>
#include <plat/sram.h>
#include <plat/omap-secure.h>
#include <plat/mmc.h>
-#include <mach/hardware.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
+#include "soc.h"
#include "common.h"
#include "hsmmc.h"
#include "omap4-sar-layout.h"
-#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
/* Enable PL310 L2 Cache controller */
omap_smc1(0x102, 0x1);
- l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
+ if (of_have_populated_dt())
+ l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+ else
+ l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
/*
* Override default outer_cache.disable with a OMAP4
--- /dev/null
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+struct omap_board_data;
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+ struct omap_board_data *);
+#endif
--- /dev/null
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP44XX_EMIF1_BASE 0x4c000000
+#define OMAP44XX_EMIF2_BASE 0x4d000000
+#define OMAP44XX_DMM_BASE 0x4e000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM1_BASE 0x4a004000
+#define OMAP4430_CM_BASE OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE 0x4a008000
+#define OMAP4430_PRM_BASE 0x4a306000
+#define OMAP4430_PRCM_MPU_BASE 0x48243000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE 0x4a100000
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_IRQ_GIC_START 32
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_L2CACHE_BASE 0x48242000
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_MCPDM_BASE 0x40132000
+#define OMAP44XX_SAR_RAM_BASE 0x4a326000
+
+#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
+
+#define OMAP4_MMU1_BASE 0x55082000
+#define OMAP4_MMU2_BASE 0x4A066000
+
+#define OMAP44XX_USBTLL_BASE (L4_44XX_BASE + 0x62000)
+#define OMAP44XX_UHH_CONFIG_BASE (L4_44XX_BASE + 0x64000)
+#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
+#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
--- /dev/null
+/*:
+ * Address mappings and base address for OMAP5 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SOC_OMAP54XX_H
+#define __ASM_SOC_OMAP54XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_54XX_BASE 0x4a000000
+#define L4_WK_54XX_BASE 0x4ae00000
+#define L4_PER_54XX_BASE 0x48000000
+#define L3_54XX_BASE 0x44000000
+#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
+#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
+#define OMAP54XX_CM_CORE_BASE 0x4a008000
+#define OMAP54XX_PRM_BASE 0x4ae06000
+#define OMAP54XX_PRCM_MPU_BASE 0x48243000
+#define OMAP54XX_SCM_BASE 0x4a002000
+#define OMAP54XX_CTRL_BASE 0x4a002800
+
+#endif /* __ASM_SOC_OMAP555554XX_H */
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include "common.h"
-#include <plat/cpu.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
+#include "soc.h"
+#include "common.h"
+#include "clockdomain.h"
+#include "powerdomain.h"
#include "cm2xxx_3xxx.h"
#include "cminst44xx.h"
+#include "cm33xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
+#include "prm33xx.h"
#include "prminst44xx.h"
#include "mux.h"
#include "pm.h"
oh->prcm.omap4.clkctrl_offs);
}
+/**
+ * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Enables the PRCM module mode related to the hwmod @oh.
+ * No return value.
+ */
+static void _am33xx_enable_module(struct omap_hwmod *oh)
+{
+ if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+ return;
+
+ pr_debug("omap_hwmod: %s: %s: %d\n",
+ oh->name, __func__, oh->prcm.omap4.modulemode);
+
+ am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
/**
* _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
* @oh: struct omap_hwmod *
oh->prcm.omap4.clkctrl_offs);
}
+/**
+ * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to enter slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully enters
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_idle() function.
+ */
+static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ return 0;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
* Return the bit position of the reset line that match the
* input name. Return -ENOENT if not found.
*/
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
- struct omap_hwmod_rst_info *ohri)
+static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
+ struct omap_hwmod_rst_info *ohri)
{
int i;
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
ret = soc_ops.assert_hardreset(oh, &ohri);
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
return soc_ops.is_hardreset_asserted(oh, &ohri);
return 0;
}
+/**
+ * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
+ */
+static int _am33xx_disable_module(struct omap_hwmod *oh)
+{
+ int v;
+
+ if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+ return -EINVAL;
+
+ pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+
+ am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
+
+ v = _am33xx_wait_target_disable(oh);
+ if (v)
+ pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+ oh->name);
+
+ return 0;
+}
+
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
- pr_warning("omap_hwmod: %s: reset can only be entered from "
- "enabled state\n", oh->name);
+ pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
+ oh->name);
return -EINVAL;
}
_enable_sysc(oh);
}
} else {
+ _omap4_disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
oh->prcm.omap4.clkctrl_offs);
}
+/**
+ * _am33xx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh || !oh->clkdm)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status */
+
+ return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
/**
* _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to assert hardreset
oh->prcm.omap4.rstctrl_offs);
}
+/**
+ * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_assert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri. Only
+ * intended for use as an soc_ops function pointer. Passes along the
+ * return value from am33xx_prminst_assert_hardreset(). XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+
+{
+ return am33xx_prm_assert_hardreset(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_deassert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri. Only
+ * intended for use as an soc_ops function pointer. Passes along the
+ * return value from am33xx_prminst_deassert_hardreset(). XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ if (ohri->st_shift)
+ pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+ oh->name, ohri->name);
+
+ return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs,
+ oh->prcm.omap4.rstst_offs);
+}
+
+/**
+ * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_is_hardreset_asserted() with parameters
+ * extracted from the hwmod @oh and the hardreset line data @ohri.
+ * Only intended for use as an soc_ops function pointer. Passes along
+ * the return value from am33xx_prminst_is_hardreset_asserted(). XXX
+ * This function is scheduled for removal when the PRM code is moved
+ * into drivers/.
+ */
+static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
+}
+
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
return r;
}
+/**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh. Intended to be called by code that registers
+ * omap_devices. See also omap_hwmod_count_resources(). Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+ int i, sdma_reqs_cnt;
+ int r = 0;
+
+ sdma_reqs_cnt = _count_sdma_reqs(oh);
+ for (i = 0; i < sdma_reqs_cnt; i++) {
+ (res + r)->name = (oh->sdma_reqs + i)->name;
+ (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->end = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->flags = IORESOURCE_DMA;
+ r++;
+ }
+
+ return r;
+}
+
/**
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
* @oh: struct omap_hwmod * to operate on
soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
+ } else if (soc_is_am33xx()) {
+ soc_ops.enable_module = _am33xx_enable_module;
+ soc_ops.disable_module = _am33xx_disable_module;
+ soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+ soc_ops.assert_hardreset = _am33xx_assert_hardreset;
+ soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+ soc_ops.init_clkdm = _init_clkdm;
} else {
WARN(1, "omap_hwmod: unknown SoC type\n");
}
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcspi.h>
#include <plat/dmtimer.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
/* mailbox */
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
- { .name = "dsp", .irq = 26 },
- { .name = "iva", .irq = 34 },
- { .irq = -1 }
+ { .name = "dsp", .irq = 26 + OMAP_INTC_START, },
+ { .name = "iva", .irq = 34 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mailbox_hwmod = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp2_hwmod = {
/* msdi1 */
static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
- { .irq = 83 },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
#include <plat/dmtimer.h>
#include <plat/mmc.h>
-#include <plat/l3_2xxx.h>
+#include "l3_2xxx.h"
+#include "soc.h"
#include "omap_hwmod_common_data.h"
-
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "wd_timer.h"
/* gpio5 */
static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
- { .irq = -1 }
+ { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_gpio5_hwmod = {
/* mailbox */
static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+ { .irq = 26 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mailbox_hwmod = {
/* mcspi3 */
static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
- { .irq = 91 },
- { .irq = -1 }
+ { .irq = 91 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
+ { .name = "mc", .irq = 92 + OMAP_INTC_START, },
+ { .name = "dma", .irq = 93 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_usbhsotg_hwmod = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .name = "ovr", .irq = 61 },
- { .name = "common", .irq = 64 },
- { .irq = -1 }
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .name = "ovr", .irq = 61 + OMAP_INTC_START, },
+ { .name = "common", .irq = 64 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .name = "common", .irq = 16 },
- { .irq = -1 }
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .name = "common", .irq = 16 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp2_hwmod = {
/* mcbsp3 */
static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .name = "common", .irq = 17 },
- { .irq = -1 }
+ { .name = "tx", .irq = 89 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 90 + OMAP_INTC_START, },
+ { .name = "common", .irq = 17 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp3_hwmod = {
/* mcbsp4 */
static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .name = "common", .irq = 18 },
- { .irq = -1 }
+ { .name = "tx", .irq = 54 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 55 + OMAP_INTC_START, },
+ { .name = "common", .irq = 18 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
/* mcbsp5 */
static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .name = "common", .irq = 19 },
- { .irq = -1 }
+ { .name = "tx", .irq = 81 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 82 + OMAP_INTC_START, },
+ { .name = "common", .irq = 19 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
/* MMC/SD/SDIO1 */
static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
- { .irq = 83 },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
/* MMC/SD/SDIO2 */
static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
- { .irq = 86 },
- { .irq = -1 }
+ { .irq = 86 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
#include <plat/serial.h>
#include <plat/dma.h>
#include <plat/common.h>
-#include <plat/hdq1w.h>
-
-#include <mach/irqs.h>
+#include "hdq1w.h"
#include "omap_hwmod_common_data.h"
/* Common MPU IRQ line data */
struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
- { .irq = 37, },
- { .irq = -1 }
+ { .irq = 37 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
- { .irq = 38, },
- { .irq = -1 }
+ { .irq = 38 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
- { .irq = 39, },
- { .irq = -1 }
+ { .irq = 39 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
- { .irq = 40, },
- { .irq = -1 }
+ { .irq = 40 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
- { .irq = 41, },
- { .irq = -1 }
+ { .irq = 41 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
- { .irq = 42, },
- { .irq = -1 }
+ { .irq = 42 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
- { .irq = 43, },
- { .irq = -1 }
+ { .irq = 43 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
- { .irq = 44, },
- { .irq = -1 }
+ { .irq = 44 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
- { .irq = 45, },
- { .irq = -1 }
+ { .irq = 45 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
- { .irq = 46, },
- { .irq = -1 }
+ { .irq = 46 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
- { .irq = 47, },
- { .irq = -1 }
+ { .irq = 47 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
- { .irq = INT_24XX_UART1_IRQ, },
- { .irq = -1 }
+ { .irq = 72 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
- { .irq = INT_24XX_UART2_IRQ, },
- { .irq = -1 }
+ { .irq = 73 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
- { .irq = INT_24XX_UART3_IRQ, },
- { .irq = -1 }
+ { .irq = 74 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
- { .irq = 25 },
- { .irq = -1 }
+ { .irq = 25 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
- { .irq = INT_24XX_I2C1_IRQ, },
- { .irq = -1 }
+ { .irq = 56 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
- { .irq = INT_24XX_I2C2_IRQ, },
- { .irq = -1 }
+ { .irq = 57 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
- { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
- { .irq = -1 }
+ { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
- { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
- { .irq = -1 }
+ { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
- { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
- { .irq = -1 }
+ { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
- { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
- { .irq = -1 }
+ { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
- { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
- { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
- { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
- { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
- { .irq = -1 }
+ { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
+ { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
+ { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
+ { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
- { .irq = 65 },
- { .irq = -1 }
+ { .irq = 65 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
- { .irq = 66 },
- { .irq = -1 }
+ { .irq = 66 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
};
struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
- { .irq = 58, },
- { .irq = -1 }
+ { .irq = 58 + OMAP_INTC_START, },
+ { .irq = -1 },
};
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
#include "omap_hwmod_common_data.h"
*/
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
-#include <plat/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
-#include <plat/mcspi.h>
-
-#include <mach/irqs.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "wd_timer.h"
struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
- { .irq = 48, },
- { .irq = -1 }
+ { .irq = 48 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
--- /dev/null
+/*
+ * omap_hwmod_33xx_data.c: Hardware modules present on the AM33XX chips
+ *
+ * Copyright (C) {2012} Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <plat/dma.h>
+#include <plat/mmc.h>
+#include <plat/i2c.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "control.h"
+#include "cm33xx.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/*
+ * IP blocks
+ */
+
+/*
+ * 'emif_fw' class
+ * instance(s): emif_fw
+ */
+static struct omap_hwmod_class am33xx_emif_fw_hwmod_class = {
+ .name = "emif_fw",
+};
+
+/* emif_fw */
+static struct omap_hwmod am33xx_emif_fw_hwmod = {
+ .name = "emif_fw",
+ .class = &am33xx_emif_fw_hwmod_class,
+ .clkdm_name = "l4fw_clkdm",
+ .main_clk = "l4fw_gclk",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'emif' class
+ * instance(s): emif
+ */
+static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
+ .rev_offs = 0x0000,
+};
+
+static struct omap_hwmod_class am33xx_emif_hwmod_class = {
+ .name = "emif",
+ .sysc = &am33xx_emif_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_emif_irqs[] = {
+ { .name = "ddrerr0", .irq = 101 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+/* emif */
+static struct omap_hwmod am33xx_emif_hwmod = {
+ .name = "emif",
+ .class = &am33xx_emif_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = am33xx_emif_irqs,
+ .main_clk = "dpll_ddr_m2_div2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'l3' class
+ * instance(s): l3_main, l3_s, l3_instr
+ */
+static struct omap_hwmod_class am33xx_l3_hwmod_class = {
+ .name = "l3",
+};
+
+/* l3_main (l3_fast) */
+static struct omap_hwmod_irq_info am33xx_l3_main_irqs[] = {
+ { .name = "l3debug", .irq = 9 + OMAP_INTC_START, },
+ { .name = "l3appint", .irq = 10 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_l3_main_hwmod = {
+ .name = "l3_main",
+ .class = &am33xx_l3_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = am33xx_l3_main_irqs,
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_L3_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* l3_s */
+static struct omap_hwmod am33xx_l3_s_hwmod = {
+ .name = "l3_s",
+ .class = &am33xx_l3_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+};
+
+/* l3_instr */
+static struct omap_hwmod am33xx_l3_instr_hwmod = {
+ .name = "l3_instr",
+ .class = &am33xx_l3_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
+ */
+static struct omap_hwmod_class am33xx_l4_hwmod_class = {
+ .name = "l4",
+};
+
+/* l4_ls */
+static struct omap_hwmod am33xx_l4_ls_hwmod = {
+ .name = "l4_ls",
+ .class = &am33xx_l4_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* l4_hs */
+static struct omap_hwmod am33xx_l4_hs_hwmod = {
+ .name = "l4_hs",
+ .class = &am33xx_l4_hwmod_class,
+ .clkdm_name = "l4hs_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .main_clk = "l4hs_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+
+/* l4_wkup */
+static struct omap_hwmod am33xx_l4_wkup_hwmod = {
+ .name = "l4_wkup",
+ .class = &am33xx_l4_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* l4_fw */
+static struct omap_hwmod am33xx_l4_fw_hwmod = {
+ .name = "l4_fw",
+ .class = &am33xx_l4_hwmod_class,
+ .clkdm_name = "l4fw_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'mpu' class
+ */
+static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
+ .name = "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod_irq_info am33xx_mpu_irqs[] = {
+ { .name = "emuint", .irq = 0 + OMAP_INTC_START, },
+ { .name = "commtx", .irq = 1 + OMAP_INTC_START, },
+ { .name = "commrx", .irq = 2 + OMAP_INTC_START, },
+ { .name = "bench", .irq = 3 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_mpu_hwmod = {
+ .name = "mpu",
+ .class = &am33xx_mpu_hwmod_class,
+ .clkdm_name = "mpu_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = am33xx_mpu_irqs,
+ .main_clk = "dpll_mpu_m2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'wakeup m3' class
+ * Wakeup controller sub-system under wakeup domain
+ */
+static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
+ .name = "wkup_m3",
+};
+
+static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
+ { .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
+};
+
+static struct omap_hwmod_irq_info am33xx_wkup_m3_irqs[] = {
+ { .name = "txev", .irq = 78 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+/* wkup_m3 */
+static struct omap_hwmod am33xx_wkup_m3_hwmod = {
+ .name = "wkup_m3",
+ .class = &am33xx_wkup_m3_hwmod_class,
+ .clkdm_name = "l4_wkup_aon_clkdm",
+ .flags = HWMOD_INIT_NO_RESET, /* Keep hardreset asserted */
+ .mpu_irqs = am33xx_wkup_m3_irqs,
+ .main_clk = "dpll_core_m4_div2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET,
+ .rstctrl_offs = AM33XX_RM_WKUP_RSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .rst_lines = am33xx_wkup_m3_resets,
+ .rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets),
+};
+
+/*
+ * 'pru-icss' class
+ * Programmable Real-Time Unit and Industrial Communication Subsystem
+ */
+static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
+ .name = "pruss",
+};
+
+static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
+ { .name = "pruss", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_irq_info am33xx_pruss_irqs[] = {
+ { .name = "evtout0", .irq = 20 + OMAP_INTC_START, },
+ { .name = "evtout1", .irq = 21 + OMAP_INTC_START, },
+ { .name = "evtout2", .irq = 22 + OMAP_INTC_START, },
+ { .name = "evtout3", .irq = 23 + OMAP_INTC_START, },
+ { .name = "evtout4", .irq = 24 + OMAP_INTC_START, },
+ { .name = "evtout5", .irq = 25 + OMAP_INTC_START, },
+ { .name = "evtout6", .irq = 26 + OMAP_INTC_START, },
+ { .name = "evtout7", .irq = 27 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+/* pru-icss */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod am33xx_pruss_hwmod = {
+ .name = "pruss",
+ .class = &am33xx_pruss_hwmod_class,
+ .clkdm_name = "pruss_ocp_clkdm",
+ .mpu_irqs = am33xx_pruss_irqs,
+ .main_clk = "pruss_ocp_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET,
+ .rstctrl_offs = AM33XX_RM_PER_RSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .rst_lines = am33xx_pruss_resets,
+ .rst_lines_cnt = ARRAY_SIZE(am33xx_pruss_resets),
+};
+
+/* gfx */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
+ .name = "gfx",
+};
+
+static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
+ { .name = "gfx", .rst_shift = 0 },
+};
+
+static struct omap_hwmod_irq_info am33xx_gfx_irqs[] = {
+ { .name = "gfxint", .irq = 37 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gfx_hwmod = {
+ .name = "gfx",
+ .class = &am33xx_gfx_hwmod_class,
+ .clkdm_name = "gfx_l3_clkdm",
+ .mpu_irqs = am33xx_gfx_irqs,
+ .main_clk = "gfx_fck_div_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET,
+ .rstctrl_offs = AM33XX_RM_GFX_RSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .rst_lines = am33xx_gfx_resets,
+ .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (whole prcm infrastructure)
+ */
+static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
+ .name = "prcm",
+};
+
+/* prcm */
+static struct omap_hwmod am33xx_prcm_hwmod = {
+ .name = "prcm",
+ .class = &am33xx_prcm_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+};
+
+/*
+ * 'adc/tsc' class
+ * TouchScreen Controller (Anolog-To-Digital Converter)
+ */
+static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x10,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = {
+ .name = "adc_tsc",
+ .sysc = &am33xx_adc_tsc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_adc_tsc_irqs[] = {
+ { .irq = 16 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_adc_tsc_hwmod = {
+ .name = "adc_tsc",
+ .class = &am33xx_adc_tsc_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = am33xx_adc_tsc_irqs,
+ .main_clk = "adc_tsc_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * Modules omap_hwmod structures
+ *
+ * The following IPs are excluded for the moment because:
+ * - They do not need an explicit SW control using omap_hwmod API.
+ * - They still need to be validated with the driver
+ * properly adapted to omap_hwmod / omap_device
+ *
+ * - cEFUSE (doesn't fall under any ocp_if)
+ * - clkdiv32k
+ * - debugss
+ * - ocmc ram
+ * - ocp watch point
+ * - aes0
+ * - sha0
+ */
+#if 0
+/*
+ * 'cefuse' class
+ */
+static struct omap_hwmod_class am33xx_cefuse_hwmod_class = {
+ .name = "cefuse",
+};
+
+static struct omap_hwmod am33xx_cefuse_hwmod = {
+ .name = "cefuse",
+ .class = &am33xx_cefuse_hwmod_class,
+ .clkdm_name = "l4_cefuse_clkdm",
+ .main_clk = "cefuse_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'clkdiv32k' class
+ */
+static struct omap_hwmod_class am33xx_clkdiv32k_hwmod_class = {
+ .name = "clkdiv32k",
+};
+
+static struct omap_hwmod am33xx_clkdiv32k_hwmod = {
+ .name = "clkdiv32k",
+ .class = &am33xx_clkdiv32k_hwmod_class,
+ .clkdm_name = "clk_24mhz_clkdm",
+ .main_clk = "clkdiv32k_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'debugss' class
+ * debug sub system
+ */
+static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
+ .name = "debugss",
+};
+
+static struct omap_hwmod am33xx_debugss_hwmod = {
+ .name = "debugss",
+ .class = &am33xx_debugss_hwmod_class,
+ .clkdm_name = "l3_aon_clkdm",
+ .main_clk = "debugss_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ocmcram */
+static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
+ .name = "ocmcram",
+};
+
+static struct omap_hwmod am33xx_ocmcram_hwmod = {
+ .name = "ocmcram",
+ .class = &am33xx_ocmcram_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ocpwp */
+static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = {
+ .name = "ocpwp",
+};
+
+static struct omap_hwmod am33xx_ocpwp_hwmod = {
+ .name = "ocpwp",
+ .class = &am33xx_ocpwp_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'aes' class
+ */
+static struct omap_hwmod_class am33xx_aes_hwmod_class = {
+ .name = "aes",
+};
+
+static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = {
+ { .irq = 102 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_aes0_hwmod = {
+ .name = "aes0",
+ .class = &am33xx_aes_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_aes0_irqs,
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* sha0 */
+static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
+ .name = "sha0",
+};
+
+static struct omap_hwmod_irq_info am33xx_sha0_irqs[] = {
+ { .irq = 108 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_sha0_hwmod = {
+ .name = "sha0",
+ .class = &am33xx_sha0_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_sha0_irqs,
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+#endif
+
+/* 'smartreflex' class */
+static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
+ .name = "smartreflex",
+};
+
+/* smartreflex0 */
+static struct omap_hwmod_irq_info am33xx_smartreflex0_irqs[] = {
+ { .irq = 120 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_smartreflex0_hwmod = {
+ .name = "smartreflex0",
+ .class = &am33xx_smartreflex_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = am33xx_smartreflex0_irqs,
+ .main_clk = "smartreflex0_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* smartreflex1 */
+static struct omap_hwmod_irq_info am33xx_smartreflex1_irqs[] = {
+ { .irq = 121 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_smartreflex1_hwmod = {
+ .name = "smartreflex1",
+ .class = &am33xx_smartreflex_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = am33xx_smartreflex1_irqs,
+ .main_clk = "smartreflex1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'control' module class
+ */
+static struct omap_hwmod_class am33xx_control_hwmod_class = {
+ .name = "control",
+};
+
+static struct omap_hwmod_irq_info am33xx_control_irqs[] = {
+ { .irq = 8 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_control_hwmod = {
+ .name = "control",
+ .class = &am33xx_control_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = am33xx_control_irqs,
+ .main_clk = "dpll_core_m4_div2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'cpgmac' class
+ * cpsw/cpgmac sub system
+ */
+static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x8,
+ .syss_offs = 0x4,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+ MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
+ .name = "cpgmac0",
+ .sysc = &am33xx_cpgmac_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_cpgmac0_irqs[] = {
+ { .name = "c0_rx_thresh_pend", .irq = 40 + OMAP_INTC_START, },
+ { .name = "c0_rx_pend", .irq = 41 + OMAP_INTC_START, },
+ { .name = "c0_tx_pend", .irq = 42 + OMAP_INTC_START, },
+ { .name = "c0_misc_pend", .irq = 43 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_cpgmac0_hwmod = {
+ .name = "cpgmac0",
+ .class = &am33xx_cpgmac0_hwmod_class,
+ .clkdm_name = "cpsw_125mhz_clkdm",
+ .mpu_irqs = am33xx_cpgmac0_irqs,
+ .main_clk = "cpsw_125mhz_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * dcan class
+ */
+static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
+ .name = "d_can",
+};
+
+/* dcan0 */
+static struct omap_hwmod_irq_info am33xx_dcan0_irqs[] = {
+ { .name = "d_can_ms", .irq = 52 + OMAP_INTC_START, },
+ { .name = "d_can_mo", .irq = 53 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_dcan0_hwmod = {
+ .name = "d_can0",
+ .class = &am33xx_dcan_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_dcan0_irqs,
+ .main_clk = "dcan0_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* dcan1 */
+static struct omap_hwmod_irq_info am33xx_dcan1_irqs[] = {
+ { .name = "d_can_ms", .irq = 55 + OMAP_INTC_START, },
+ { .name = "d_can_mo", .irq = 56 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+static struct omap_hwmod am33xx_dcan1_hwmod = {
+ .name = "d_can1",
+ .class = &am33xx_dcan_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_dcan1_irqs,
+ .main_clk = "dcan1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* elm */
+static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_elm_hwmod_class = {
+ .name = "elm",
+ .sysc = &am33xx_elm_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_elm_irqs[] = {
+ { .irq = 4 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_elm_hwmod = {
+ .name = "elm",
+ .class = &am33xx_elm_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_elm_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_ELM_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'epwmss' class: ecap0,1,2, ehrpwm0,1,2
+ */
+static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x4,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
+ .name = "epwmss",
+ .sysc = &am33xx_epwmss_sysc,
+};
+
+/* ehrpwm0 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm0_irqs[] = {
+ { .name = "int", .irq = 86 + OMAP_INTC_START, },
+ { .name = "tzint", .irq = 58 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm0_hwmod = {
+ .name = "ehrpwm0",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_ehrpwm0_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ehrpwm1 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm1_irqs[] = {
+ { .name = "int", .irq = 87 + OMAP_INTC_START, },
+ { .name = "tzint", .irq = 59 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm1_hwmod = {
+ .name = "ehrpwm1",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_ehrpwm1_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ehrpwm2 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm2_irqs[] = {
+ { .name = "int", .irq = 39 + OMAP_INTC_START, },
+ { .name = "tzint", .irq = 60 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
+ .name = "ehrpwm2",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_ehrpwm2_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ecap0 */
+static struct omap_hwmod_irq_info am33xx_ecap0_irqs[] = {
+ { .irq = 31 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap0_hwmod = {
+ .name = "ecap0",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_ecap0_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ecap1 */
+static struct omap_hwmod_irq_info am33xx_ecap1_irqs[] = {
+ { .irq = 47 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap1_hwmod = {
+ .name = "ecap1",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_ecap1_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* ecap2 */
+static struct omap_hwmod_irq_info am33xx_ecap2_irqs[] = {
+ { .irq = 61 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap2_hwmod = {
+ .name = "ecap2",
+ .mpu_irqs = am33xx_ecap2_irqs,
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'gpio' class: for gpio 0,1,2,3
+ */
+static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0114,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+ .name = "gpio",
+ .sysc = &am33xx_gpio_sysc,
+ .rev = 2,
+};
+
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+ .bank_width = 32,
+ .dbck_flag = true,
+};
+
+/* gpio0 */
+static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio0_dbclk" },
+};
+
+static struct omap_hwmod_irq_info am33xx_gpio0_irqs[] = {
+ { .irq = 96 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gpio0_hwmod = {
+ .name = "gpio1",
+ .class = &am33xx_gpio_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = am33xx_gpio0_irqs,
+ .main_clk = "dpll_core_m4_div2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = gpio0_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks),
+ .dev_attr = &gpio_dev_attr,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info am33xx_gpio1_irqs[] = {
+ { .irq = 98 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio1_hwmod = {
+ .name = "gpio2",
+ .class = &am33xx_gpio_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = am33xx_gpio1_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = gpio1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
+ .dev_attr = &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info am33xx_gpio2_irqs[] = {
+ { .irq = 32 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio2_hwmod = {
+ .name = "gpio3",
+ .class = &am33xx_gpio_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = am33xx_gpio2_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = gpio2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
+ .dev_attr = &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info am33xx_gpio3_irqs[] = {
+ { .irq = 62 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio3_hwmod = {
+ .name = "gpio4",
+ .class = &am33xx_gpio_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = am33xx_gpio3_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = gpio3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
+ .dev_attr = &gpio_dev_attr,
+};
+
+/* gpmc */
+static struct omap_hwmod_class_sysconfig gpmc_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
+ .name = "gpmc",
+ .sysc = &gpmc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_gpmc_irqs[] = {
+ { .irq = 100 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gpmc_hwmod = {
+ .name = "gpmc",
+ .class = &am33xx_gpmc_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = am33xx_gpmc_irqs,
+ .main_clk = "l3s_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'i2c' class */
+static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0090,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+ .name = "i2c",
+ .sysc = &am33xx_i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_2,
+ .reset = &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+};
+
+/* i2c1 */
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+ { .irq = 70 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info i2c1_edma_reqs[] = {
+ { .name = "tx", .dma_req = 0, },
+ { .name = "rx", .dma_req = 0, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_i2c1_hwmod = {
+ .name = "i2c1",
+ .class = &i2c_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = i2c1_mpu_irqs,
+ .sdma_reqs = i2c1_edma_reqs,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .main_clk = "dpll_per_m2_div4_wkupdm_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &i2c_dev_attr,
+};
+
+/* i2c1 */
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+ { .irq = 71 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info i2c2_edma_reqs[] = {
+ { .name = "tx", .dma_req = 0, },
+ { .name = "rx", .dma_req = 0, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_i2c2_hwmod = {
+ .name = "i2c2",
+ .class = &i2c_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = i2c2_mpu_irqs,
+ .sdma_reqs = i2c2_edma_reqs,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &i2c_dev_attr,
+};
+
+/* i2c3 */
+static struct omap_hwmod_dma_info i2c3_edma_reqs[] = {
+ { .name = "tx", .dma_req = 0, },
+ { .name = "rx", .dma_req = 0, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
+ { .irq = 30 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_i2c3_hwmod = {
+ .name = "i2c3",
+ .class = &i2c_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = i2c3_mpu_irqs,
+ .sdma_reqs = i2c3_edma_reqs,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &i2c_dev_attr,
+};
+
+
+/* lcdc */
+static struct omap_hwmod_class_sysconfig lcdc_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x54,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_lcdc_hwmod_class = {
+ .name = "lcdc",
+ .sysc = &lcdc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_lcdc_irqs[] = {
+ { .irq = 36 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_lcdc_hwmod = {
+ .name = "lcdc",
+ .class = &am33xx_lcdc_hwmod_class,
+ .clkdm_name = "lcdc_clkdm",
+ .mpu_irqs = am33xx_lcdc_irqs,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+ .main_clk = "lcd_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
+ .name = "mailbox",
+ .sysc = &am33xx_mailbox_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_mailbox_irqs[] = {
+ { .irq = 77 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_mailbox_hwmod = {
+ .name = "mailbox",
+ .class = &am33xx_mailbox_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_mailbox_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'mcasp' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x4,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
+ .name = "mcasp",
+ .sysc = &am33xx_mcasp_sysc,
+};
+
+/* mcasp0 */
+static struct omap_hwmod_irq_info am33xx_mcasp0_irqs[] = {
+ { .name = "ax", .irq = 80 + OMAP_INTC_START, },
+ { .name = "ar", .irq = 81 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcasp0_edma_reqs[] = {
+ { .name = "tx", .dma_req = 8, },
+ { .name = "rx", .dma_req = 9, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_mcasp0_hwmod = {
+ .name = "mcasp0",
+ .class = &am33xx_mcasp_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .mpu_irqs = am33xx_mcasp0_irqs,
+ .sdma_reqs = am33xx_mcasp0_edma_reqs,
+ .main_clk = "mcasp0_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* mcasp1 */
+static struct omap_hwmod_irq_info am33xx_mcasp1_irqs[] = {
+ { .name = "ax", .irq = 82 + OMAP_INTC_START, },
+ { .name = "ar", .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcasp1_edma_reqs[] = {
+ { .name = "tx", .dma_req = 10, },
+ { .name = "rx", .dma_req = 11, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_mcasp1_hwmod = {
+ .name = "mcasp1",
+ .class = &am33xx_mcasp_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .mpu_irqs = am33xx_mcasp1_irqs,
+ .sdma_reqs = am33xx_mcasp1_edma_reqs,
+ .main_clk = "mcasp1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'mmc' class */
+static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
+ .rev_offs = 0x1fc,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
+ .name = "mmc",
+ .sysc = &am33xx_mmc_sysc,
+};
+
+/* mmc0 */
+static struct omap_hwmod_irq_info am33xx_mmc0_irqs[] = {
+ { .irq = 64 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc0_edma_reqs[] = {
+ { .name = "tx", .dma_req = 24, },
+ { .name = "rx", .dma_req = 25, },
+ { .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+ .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod am33xx_mmc0_hwmod = {
+ .name = "mmc1",
+ .class = &am33xx_mmc_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_mmc0_irqs,
+ .sdma_reqs = am33xx_mmc0_edma_reqs,
+ .main_clk = "mmc_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &am33xx_mmc0_dev_attr,
+};
+
+/* mmc1 */
+static struct omap_hwmod_irq_info am33xx_mmc1_irqs[] = {
+ { .irq = 28 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc1_edma_reqs[] = {
+ { .name = "tx", .dma_req = 2, },
+ { .name = "rx", .dma_req = 3, },
+ { .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+ .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod am33xx_mmc1_hwmod = {
+ .name = "mmc2",
+ .class = &am33xx_mmc_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_mmc1_irqs,
+ .sdma_reqs = am33xx_mmc1_edma_reqs,
+ .main_clk = "mmc_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &am33xx_mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_hwmod_irq_info am33xx_mmc2_irqs[] = {
+ { .irq = 29 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc2_edma_reqs[] = {
+ { .name = "tx", .dma_req = 64, },
+ { .name = "rx", .dma_req = 65, },
+ { .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+ .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+static struct omap_hwmod am33xx_mmc2_hwmod = {
+ .name = "mmc3",
+ .class = &am33xx_mmc_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .mpu_irqs = am33xx_mmc2_irqs,
+ .sdma_reqs = am33xx_mmc2_edma_reqs,
+ .main_clk = "mmc_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &am33xx_mmc2_dev_attr,
+};
+
+/*
+ * 'rtc' class
+ * rtc subsystem
+ */
+static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
+ .rev_offs = 0x0074,
+ .sysc_offs = 0x0078,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO |
+ SIDLE_SMART | SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
+ .name = "rtc",
+ .sysc = &am33xx_rtc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_rtc_irqs[] = {
+ { .name = "rtcint", .irq = 75 + OMAP_INTC_START, },
+ { .name = "rtcalarmint", .irq = 76 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_rtc_hwmod = {
+ .name = "rtc",
+ .class = &am33xx_rtc_hwmod_class,
+ .clkdm_name = "l4_rtc_clkdm",
+ .mpu_irqs = am33xx_rtc_irqs,
+ .main_clk = "clk_32768_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'spi' class */
+static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0110,
+ .syss_offs = 0x0114,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_spi_hwmod_class = {
+ .name = "mcspi",
+ .sysc = &am33xx_mcspi_sysc,
+ .rev = OMAP4_MCSPI_REV,
+};
+
+/* spi0 */
+static struct omap_hwmod_irq_info am33xx_spi0_irqs[] = {
+ { .irq = 65 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcspi0_edma_reqs[] = {
+ { .name = "rx0", .dma_req = 17 },
+ { .name = "tx0", .dma_req = 16 },
+ { .name = "rx1", .dma_req = 19 },
+ { .name = "tx1", .dma_req = 18 },
+ { .dma_req = -1 }
+};
+
+static struct omap2_mcspi_dev_attr mcspi_attrib = {
+ .num_chipselect = 2,
+};
+static struct omap_hwmod am33xx_spi0_hwmod = {
+ .name = "spi0",
+ .class = &am33xx_spi_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_spi0_irqs,
+ .sdma_reqs = am33xx_mcspi0_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &mcspi_attrib,
+};
+
+/* spi1 */
+static struct omap_hwmod_irq_info am33xx_spi1_irqs[] = {
+ { .irq = 125 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcspi1_edma_reqs[] = {
+ { .name = "rx0", .dma_req = 43 },
+ { .name = "tx0", .dma_req = 42 },
+ { .name = "rx1", .dma_req = 45 },
+ { .name = "tx1", .dma_req = 44 },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_spi1_hwmod = {
+ .name = "spi1",
+ .class = &am33xx_spi_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_spi1_irqs,
+ .sdma_reqs = am33xx_mcspi1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &mcspi_attrib,
+};
+
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the
+ * processes running on multiple processors
+ */
+static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
+ .name = "spinlock",
+};
+
+static struct omap_hwmod am33xx_spinlock_hwmod = {
+ .name = "spinlock",
+ .class = &am33xx_spinlock_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'timer 2-7' class */
+static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_timer_hwmod_class = {
+ .name = "timer",
+ .sysc = &am33xx_timer_sysc,
+};
+
+/* timer1 1ms */
+static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
+ .name = "timer",
+ .sysc = &am33xx_timer1ms_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_timer1_irqs[] = {
+ { .irq = 67 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer1_hwmod = {
+ .name = "timer1",
+ .class = &am33xx_timer1ms_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = am33xx_timer1_irqs,
+ .main_clk = "timer1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer2_irqs[] = {
+ { .irq = 68 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer2_hwmod = {
+ .name = "timer2",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer2_irqs,
+ .main_clk = "timer2_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer3_irqs[] = {
+ { .irq = 69 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer3_hwmod = {
+ .name = "timer3",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer3_irqs,
+ .main_clk = "timer3_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer4_irqs[] = {
+ { .irq = 92 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer4_hwmod = {
+ .name = "timer4",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer4_irqs,
+ .main_clk = "timer4_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer5_irqs[] = {
+ { .irq = 93 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer5_hwmod = {
+ .name = "timer5",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer5_irqs,
+ .main_clk = "timer5_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer6_irqs[] = {
+ { .irq = 94 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer6_hwmod = {
+ .name = "timer6",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer6_irqs,
+ .main_clk = "timer6_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_timer7_irqs[] = {
+ { .irq = 95 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer7_hwmod = {
+ .name = "timer7",
+ .class = &am33xx_timer_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_timer7_irqs,
+ .main_clk = "timer7_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* tpcc */
+static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
+ .name = "tpcc",
+};
+
+static struct omap_hwmod_irq_info am33xx_tpcc_irqs[] = {
+ { .name = "edma0", .irq = 12 + OMAP_INTC_START, },
+ { .name = "edma0_mperr", .irq = 13 + OMAP_INTC_START, },
+ { .name = "edma0_err", .irq = 14 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tpcc_hwmod = {
+ .name = "tpcc",
+ .class = &am33xx_tpcc_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_tpcc_irqs,
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+/* 'tptc' class */
+static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
+ .name = "tptc",
+ .sysc = &am33xx_tptc_sysc,
+};
+
+/* tptc0 */
+static struct omap_hwmod_irq_info am33xx_tptc0_irqs[] = {
+ { .irq = 112 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc0_hwmod = {
+ .name = "tptc0",
+ .class = &am33xx_tptc_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_tptc0_irqs,
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* tptc1 */
+static struct omap_hwmod_irq_info am33xx_tptc1_irqs[] = {
+ { .irq = 113 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc1_hwmod = {
+ .name = "tptc1",
+ .class = &am33xx_tptc_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_tptc1_irqs,
+ .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* tptc2 */
+static struct omap_hwmod_irq_info am33xx_tptc2_irqs[] = {
+ { .irq = 114 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc2_hwmod = {
+ .name = "tptc2",
+ .class = &am33xx_tptc_hwmod_class,
+ .clkdm_name = "l3_clkdm",
+ .mpu_irqs = am33xx_tptc2_irqs,
+ .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+ .main_clk = "l3_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'uart' class */
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+ .rev_offs = 0x50,
+ .sysc_offs = 0x54,
+ .syss_offs = 0x58,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+ .name = "uart",
+ .sysc = &uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod_dma_info uart1_edma_reqs[] = {
+ { .name = "tx", .dma_req = 26, },
+ { .name = "rx", .dma_req = 27, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info am33xx_uart1_irqs[] = {
+ { .irq = 72 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart1_hwmod = {
+ .name = "uart1",
+ .class = &uart_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .mpu_irqs = am33xx_uart1_irqs,
+ .sdma_reqs = uart1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_wkupdm_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
+ { .irq = 73 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart2_hwmod = {
+ .name = "uart2",
+ .class = &uart_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_uart2_irqs,
+ .sdma_reqs = uart1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_UART1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* uart3 */
+static struct omap_hwmod_dma_info uart3_edma_reqs[] = {
+ { .name = "tx", .dma_req = 30, },
+ { .name = "rx", .dma_req = 31, },
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info am33xx_uart3_irqs[] = {
+ { .irq = 74 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart3_hwmod = {
+ .name = "uart3",
+ .class = &uart_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_uart3_irqs,
+ .sdma_reqs = uart3_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_UART2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_uart4_irqs[] = {
+ { .irq = 44 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart4_hwmod = {
+ .name = "uart4",
+ .class = &uart_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_uart4_irqs,
+ .sdma_reqs = uart1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_UART3_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_uart5_irqs[] = {
+ { .irq = 45 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart5_hwmod = {
+ .name = "uart5",
+ .class = &uart_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_uart5_irqs,
+ .sdma_reqs = uart1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_UART4_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_irq_info am33xx_uart6_irqs[] = {
+ { .irq = 46 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart6_hwmod = {
+ .name = "uart6",
+ .class = &uart_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_uart6_irqs,
+ .sdma_reqs = uart1_edma_reqs,
+ .main_clk = "dpll_per_m2_div4_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_UART5_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* 'wd_timer' class */
+static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
+ .name = "wd_timer",
+};
+
+/*
+ * XXX: device.c file uses hardcoded name for watchdog timer
+ * driver "wd_timer2, so we are also using same name as of now...
+ */
+static struct omap_hwmod am33xx_wd_timer1_hwmod = {
+ .name = "wd_timer2",
+ .class = &am33xx_wd_timer_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .main_clk = "wdt1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'usb_otg' class
+ * high-speed on-the-go universal serial bus (usb_otg) controller
+ */
+static struct omap_hwmod_class_sysconfig am33xx_usbhsotg_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_usbotg_class = {
+ .name = "usbotg",
+ .sysc = &am33xx_usbhsotg_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
+ { .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
+ { .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
+ { .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
+ { .irq = -1 + OMAP_INTC_START, },
+};
+
+static struct omap_hwmod am33xx_usbss_hwmod = {
+ .name = "usb_otg_hs",
+ .class = &am33xx_usbotg_class,
+ .clkdm_name = "l3s_clkdm",
+ .mpu_irqs = am33xx_usbss_mpu_irqs,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+ .main_clk = "usbotg_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_USB0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+
+/*
+ * Interfaces
+ */
+
+/* l4 fw -> emif fw */
+static struct omap_hwmod_ocp_if am33xx_l4_fw__emif_fw = {
+ .master = &am33xx_l4_fw_hwmod,
+ .slave = &am33xx_emif_fw_hwmod,
+ .clk = "l4fw_gclk",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_emif_addrs[] = {
+ {
+ .pa_start = 0x4c000000,
+ .pa_end = 0x4c000fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+/* l3 main -> emif */
+static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_emif_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .addr = am33xx_emif_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
+ .master = &am33xx_mpu_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "dpll_mpu_m2_ck",
+ .user = OCP_USER_MPU,
+};
+
+/* l3 main -> l4 hs */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_l4_hs_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 s */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_l3_s_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 per/ls */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_l4_ls_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 wkup */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_l4_wkup_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 fw */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_fw = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_l4_fw_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 instr */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_l3_instr_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> prcm */
+static struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
+ .master = &am33xx_mpu_hwmod,
+ .slave = &am33xx_prcm_hwmod,
+ .clk = "dpll_mpu_m2_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l3 main*/
+static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3s_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* pru-icss -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
+ .master = &am33xx_pruss_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* wkup m3 -> l4 wkup */
+static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
+ .master = &am33xx_wkup_m3_hwmod,
+ .slave = &am33xx_l4_wkup_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gfx -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
+ .master = &am33xx_gfx_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> wkup m3 */
+static struct omap_hwmod_addr_space am33xx_wkup_m3_addrs[] = {
+ {
+ .name = "umem",
+ .pa_start = 0x44d00000,
+ .pa_end = 0x44d00000 + SZ_16K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "dmem",
+ .pa_start = 0x44d80000,
+ .pa_end = 0x44d80000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_wkup_m3_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_wkup_m3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 hs -> pru-icss */
+static struct omap_hwmod_addr_space am33xx_pruss_addrs[] = {
+ {
+ .pa_start = 0x4a300000,
+ .pa_end = 0x4a300000 + SZ_512K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
+ .master = &am33xx_l4_hs_hwmod,
+ .slave = &am33xx_pruss_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .addr = am33xx_pruss_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> gfx */
+static struct omap_hwmod_addr_space am33xx_gfx_addrs[] = {
+ {
+ .pa_start = 0x56000000,
+ .pa_end = 0x56000000 + SZ_16M - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_gfx_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .addr = am33xx_gfx_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> smartreflex0 */
+static struct omap_hwmod_addr_space am33xx_smartreflex0_addrs[] = {
+ {
+ .pa_start = 0x44e37000,
+ .pa_end = 0x44e37000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex0 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_smartreflex0_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_smartreflex0_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> smartreflex1 */
+static struct omap_hwmod_addr_space am33xx_smartreflex1_addrs[] = {
+ {
+ .pa_start = 0x44e39000,
+ .pa_end = 0x44e39000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex1 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_smartreflex1_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_smartreflex1_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> control */
+static struct omap_hwmod_addr_space am33xx_control_addrs[] = {
+ {
+ .pa_start = 0x44e10000,
+ .pa_end = 0x44e10000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_control_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_control_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> rtc */
+static struct omap_hwmod_addr_space am33xx_rtc_addrs[] = {
+ {
+ .pa_start = 0x44e3e000,
+ .pa_end = 0x44e3e000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_rtc_hwmod,
+ .clk = "clkdiv32k_ick",
+ .addr = am33xx_rtc_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per/ls -> DCAN0 */
+static struct omap_hwmod_addr_space am33xx_dcan0_addrs[] = {
+ {
+ .pa_start = 0x481CC000,
+ .pa_end = 0x481CC000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_dcan0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_dcan0_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> DCAN1 */
+static struct omap_hwmod_addr_space am33xx_dcan1_addrs[] = {
+ {
+ .pa_start = 0x481D0000,
+ .pa_end = 0x481D0000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_dcan1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_dcan1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> GPIO2 */
+static struct omap_hwmod_addr_space am33xx_gpio1_addrs[] = {
+ {
+ .pa_start = 0x4804C000,
+ .pa_end = 0x4804C000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_gpio1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_gpio1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio3 */
+static struct omap_hwmod_addr_space am33xx_gpio2_addrs[] = {
+ {
+ .pa_start = 0x481AC000,
+ .pa_end = 0x481AC000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_gpio2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_gpio2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio4 */
+static struct omap_hwmod_addr_space am33xx_gpio3_addrs[] = {
+ {
+ .pa_start = 0x481AE000,
+ .pa_end = 0x481AE000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_gpio3_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_gpio3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> I2C1 */
+static struct omap_hwmod_addr_space am33xx_i2c1_addr_space[] = {
+ {
+ .pa_start = 0x44E0B000,
+ .pa_end = 0x44E0B000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_i2c1_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_i2c1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* L4 WKUP -> GPIO1 */
+static struct omap_hwmod_addr_space am33xx_gpio0_addrs[] = {
+ {
+ .pa_start = 0x44E07000,
+ .pa_end = 0x44E07000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_gpio0_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_gpio0_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> ADC_TSC */
+static struct omap_hwmod_addr_space am33xx_adc_tsc_addrs[] = {
+ {
+ .pa_start = 0x44E0D000,
+ .pa_end = 0x44E0D000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_adc_tsc_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_adc_tsc_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_cpgmac0_addr_space[] = {
+ /* cpsw ss */
+ {
+ .pa_start = 0x4a100000,
+ .pa_end = 0x4a100000 + SZ_2K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ /* cpsw wr */
+ {
+ .pa_start = 0x4a101200,
+ .pa_end = 0x4a101200 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
+ .master = &am33xx_l4_hs_hwmod,
+ .slave = &am33xx_cpgmac0_hwmod,
+ .clk = "cpsw_125mhz_gclk",
+ .addr = am33xx_cpgmac0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
+ {
+ .pa_start = 0x48080000,
+ .pa_end = 0x48080000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_elm_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_elm_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm0_addr_space[] = {
+ {
+ .pa_start = 0x48300000,
+ .pa_end = 0x48300000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48300200,
+ .pa_end = 0x48300200 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ehrpwm0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ehrpwm0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm1_addr_space[] = {
+ {
+ .pa_start = 0x48302000,
+ .pa_end = 0x48302000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48302200,
+ .pa_end = 0x48302200 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ehrpwm1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ehrpwm1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm2_addr_space[] = {
+ {
+ .pa_start = 0x48304000,
+ .pa_end = 0x48304000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48304200,
+ .pa_end = 0x48304200 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ehrpwm2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ehrpwm2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = {
+ {
+ .pa_start = 0x48300000,
+ .pa_end = 0x48300000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48300100,
+ .pa_end = 0x48300100 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ecap0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ecap0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap1_addr_space[] = {
+ {
+ .pa_start = 0x48302000,
+ .pa_end = 0x48302000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48302100,
+ .pa_end = 0x48302100 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ecap1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ecap1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap2_addr_space[] = {
+ {
+ .pa_start = 0x48304000,
+ .pa_end = 0x48304000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48304100,
+ .pa_end = 0x48304100 + SZ_256 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_ecap2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_ecap2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3s cfg -> gpmc */
+static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
+ {
+ .pa_start = 0x50000000,
+ .pa_end = 0x50000000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_gpmc_hwmod,
+ .clk = "l3s_gclk",
+ .addr = am33xx_gpmc_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* i2c2 */
+static struct omap_hwmod_addr_space am33xx_i2c2_addr_space[] = {
+ {
+ .pa_start = 0x4802A000,
+ .pa_end = 0x4802A000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_i2c2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_i2c2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_i2c3_addr_space[] = {
+ {
+ .pa_start = 0x4819C000,
+ .pa_end = 0x4819C000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_i2c3_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_i2c3_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
+ {
+ .pa_start = 0x4830E000,
+ .pa_end = 0x4830E000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_lcdc_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .addr = am33xx_lcdc_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
+ {
+ .pa_start = 0x480C8000,
+ .pa_end = 0x480C8000 + (SZ_4K - 1),
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4 ls -> mailbox */
+static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_mailbox_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mailbox_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> spinlock */
+static struct omap_hwmod_addr_space am33xx_spinlock_addrs[] = {
+ {
+ .pa_start = 0x480Ca000,
+ .pa_end = 0x480Ca000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_spinlock_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_spinlock_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp0 */
+static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
+ {
+ .pa_start = 0x48038000,
+ .pa_end = 0x48038000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_mcasp0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mcasp0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 s -> mcasp0 data */
+static struct omap_hwmod_addr_space am33xx_mcasp0_data_addr_space[] = {
+ {
+ .pa_start = 0x46000000,
+ .pa_end = 0x46000000 + SZ_4M - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mcasp0_data = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_mcasp0_hwmod,
+ .clk = "l3s_gclk",
+ .addr = am33xx_mcasp0_data_addr_space,
+ .user = OCP_USER_SDMA,
+};
+
+/* l4 ls -> mcasp1 */
+static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
+ {
+ .pa_start = 0x4803C000,
+ .pa_end = 0x4803C000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_mcasp1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mcasp1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 s -> mcasp1 data */
+static struct omap_hwmod_addr_space am33xx_mcasp1_data_addr_space[] = {
+ {
+ .pa_start = 0x46400000,
+ .pa_end = 0x46400000 + SZ_4M - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mcasp1_data = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_mcasp1_hwmod,
+ .clk = "l3s_gclk",
+ .addr = am33xx_mcasp1_data_addr_space,
+ .user = OCP_USER_SDMA,
+};
+
+/* l4 ls -> mmc0 */
+static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
+ {
+ .pa_start = 0x48060100,
+ .pa_end = 0x48060100 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_mmc0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mmc0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc1 */
+static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
+ {
+ .pa_start = 0x481d8100,
+ .pa_end = 0x481d8100 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_mmc1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mmc1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 s -> mmc2 */
+static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
+ {
+ .pa_start = 0x47810100,
+ .pa_end = 0x47810100 + SZ_64K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_mmc2_hwmod,
+ .clk = "l3s_gclk",
+ .addr = am33xx_mmc2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi0 */
+static struct omap_hwmod_addr_space am33xx_mcspi0_addr_space[] = {
+ {
+ .pa_start = 0x48030000,
+ .pa_end = 0x48030000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_spi0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mcspi0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi1 */
+static struct omap_hwmod_addr_space am33xx_mcspi1_addr_space[] = {
+ {
+ .pa_start = 0x481A0000,
+ .pa_end = 0x481A0000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_spi1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_mcspi1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> timer1 */
+static struct omap_hwmod_addr_space am33xx_timer1_addr_space[] = {
+ {
+ .pa_start = 0x44E31000,
+ .pa_end = 0x44E31000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_timer1_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_timer1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer2 */
+static struct omap_hwmod_addr_space am33xx_timer2_addr_space[] = {
+ {
+ .pa_start = 0x48040000,
+ .pa_end = 0x48040000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer3 */
+static struct omap_hwmod_addr_space am33xx_timer3_addr_space[] = {
+ {
+ .pa_start = 0x48042000,
+ .pa_end = 0x48042000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer3_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer3_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer4 */
+static struct omap_hwmod_addr_space am33xx_timer4_addr_space[] = {
+ {
+ .pa_start = 0x48044000,
+ .pa_end = 0x48044000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer4_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer4_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer5 */
+static struct omap_hwmod_addr_space am33xx_timer5_addr_space[] = {
+ {
+ .pa_start = 0x48046000,
+ .pa_end = 0x48046000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer5_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer5_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer6 */
+static struct omap_hwmod_addr_space am33xx_timer6_addr_space[] = {
+ {
+ .pa_start = 0x48048000,
+ .pa_end = 0x48048000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer6_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer6_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 per -> timer7 */
+static struct omap_hwmod_addr_space am33xx_timer7_addr_space[] = {
+ {
+ .pa_start = 0x4804A000,
+ .pa_end = 0x4804A000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_timer7_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_timer7_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc */
+static struct omap_hwmod_addr_space am33xx_tpcc_addr_space[] = {
+ {
+ .pa_start = 0x49000000,
+ .pa_end = 0x49000000 + SZ_32K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_tpcc_hwmod,
+ .clk = "l3_gclk",
+ .addr = am33xx_tpcc_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc0 */
+static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
+ {
+ .pa_start = 0x49800000,
+ .pa_end = 0x49800000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_tptc0_hwmod,
+ .clk = "l3_gclk",
+ .addr = am33xx_tptc0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc1 */
+static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
+ {
+ .pa_start = 0x49900000,
+ .pa_end = 0x49900000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_tptc1_hwmod,
+ .clk = "l3_gclk",
+ .addr = am33xx_tptc1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc2 */
+static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
+ {
+ .pa_start = 0x49a00000,
+ .pa_end = 0x49a00000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am33xx_tptc2_hwmod,
+ .clk = "l3_gclk",
+ .addr = am33xx_tptc2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> uart1 */
+static struct omap_hwmod_addr_space am33xx_uart1_addr_space[] = {
+ {
+ .pa_start = 0x44E09000,
+ .pa_end = 0x44E09000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_uart1_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_uart1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> uart2 */
+static struct omap_hwmod_addr_space am33xx_uart2_addr_space[] = {
+ {
+ .pa_start = 0x48022000,
+ .pa_end = 0x48022000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_uart2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_uart2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> uart3 */
+static struct omap_hwmod_addr_space am33xx_uart3_addr_space[] = {
+ {
+ .pa_start = 0x48024000,
+ .pa_end = 0x48024000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_uart3_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_uart3_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> uart4 */
+static struct omap_hwmod_addr_space am33xx_uart4_addr_space[] = {
+ {
+ .pa_start = 0x481A6000,
+ .pa_end = 0x481A6000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_uart4_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_uart4_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> uart5 */
+static struct omap_hwmod_addr_space am33xx_uart5_addr_space[] = {
+ {
+ .pa_start = 0x481A8000,
+ .pa_end = 0x481A8000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_uart5_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_uart5_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 ls -> uart6 */
+static struct omap_hwmod_addr_space am33xx_uart6_addr_space[] = {
+ {
+ .pa_start = 0x481aa000,
+ .pa_end = 0x481aa000 + SZ_8K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_uart6_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_uart6_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/* l4 wkup -> wd_timer1 */
+static struct omap_hwmod_addr_space am33xx_wd_timer1_addrs[] = {
+ {
+ .pa_start = 0x44e35000,
+ .pa_end = 0x44e35000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am33xx_wd_timer1_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .addr = am33xx_wd_timer1_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* usbss */
+/* l3 s -> USBSS interface */
+static struct omap_hwmod_addr_space am33xx_usbss_addr_space[] = {
+ {
+ .name = "usbss",
+ .pa_start = 0x47400000,
+ .pa_end = 0x47400000 + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "musb0",
+ .pa_start = 0x47401000,
+ .pa_end = 0x47401000 + SZ_2K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "musb1",
+ .pa_start = 0x47401800,
+ .pa_end = 0x47401800 + SZ_2K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
+ .master = &am33xx_l3_s_hwmod,
+ .slave = &am33xx_usbss_hwmod,
+ .clk = "l3s_gclk",
+ .addr = am33xx_usbss_addr_space,
+ .user = OCP_USER_MPU,
+ .flags = OCPIF_SWSUP_IDLE,
+};
+
+static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
+ &am33xx_l4_fw__emif_fw,
+ &am33xx_l3_main__emif,
+ &am33xx_mpu__l3_main,
+ &am33xx_mpu__prcm,
+ &am33xx_l3_s__l4_ls,
+ &am33xx_l3_s__l4_wkup,
+ &am33xx_l3_s__l4_fw,
+ &am33xx_l3_main__l4_hs,
+ &am33xx_l3_main__l3_s,
+ &am33xx_l3_main__l3_instr,
+ &am33xx_l3_main__gfx,
+ &am33xx_l3_s__l3_main,
+ &am33xx_pruss__l3_main,
+ &am33xx_wkup_m3__l4_wkup,
+ &am33xx_gfx__l3_main,
+ &am33xx_l4_wkup__wkup_m3,
+ &am33xx_l4_wkup__control,
+ &am33xx_l4_wkup__smartreflex0,
+ &am33xx_l4_wkup__smartreflex1,
+ &am33xx_l4_wkup__uart1,
+ &am33xx_l4_wkup__timer1,
+ &am33xx_l4_wkup__rtc,
+ &am33xx_l4_wkup__i2c1,
+ &am33xx_l4_wkup__gpio0,
+ &am33xx_l4_wkup__adc_tsc,
+ &am33xx_l4_wkup__wd_timer1,
+ &am33xx_l4_hs__pruss,
+ &am33xx_l4_per__dcan0,
+ &am33xx_l4_per__dcan1,
+ &am33xx_l4_per__gpio1,
+ &am33xx_l4_per__gpio2,
+ &am33xx_l4_per__gpio3,
+ &am33xx_l4_per__i2c2,
+ &am33xx_l4_per__i2c3,
+ &am33xx_l4_per__mailbox,
+ &am33xx_l4_ls__mcasp0,
+ &am33xx_l3_s__mcasp0_data,
+ &am33xx_l4_ls__mcasp1,
+ &am33xx_l3_s__mcasp1_data,
+ &am33xx_l4_ls__mmc0,
+ &am33xx_l4_ls__mmc1,
+ &am33xx_l3_s__mmc2,
+ &am33xx_l4_ls__timer2,
+ &am33xx_l4_ls__timer3,
+ &am33xx_l4_ls__timer4,
+ &am33xx_l4_ls__timer5,
+ &am33xx_l4_ls__timer6,
+ &am33xx_l4_ls__timer7,
+ &am33xx_l3_main__tpcc,
+ &am33xx_l4_ls__uart2,
+ &am33xx_l4_ls__uart3,
+ &am33xx_l4_ls__uart4,
+ &am33xx_l4_ls__uart5,
+ &am33xx_l4_ls__uart6,
+ &am33xx_l4_ls__spinlock,
+ &am33xx_l4_ls__elm,
+ &am33xx_l4_ls__ehrpwm0,
+ &am33xx_l4_ls__ehrpwm1,
+ &am33xx_l4_ls__ehrpwm2,
+ &am33xx_l4_ls__ecap0,
+ &am33xx_l4_ls__ecap1,
+ &am33xx_l4_ls__ecap2,
+ &am33xx_l3_s__gpmc,
+ &am33xx_l3_main__lcdc,
+ &am33xx_l4_ls__mcspi0,
+ &am33xx_l4_ls__mcspi1,
+ &am33xx_l3_main__tptc0,
+ &am33xx_l3_main__tptc1,
+ &am33xx_l3_main__tptc2,
+ &am33xx_l3_s__usbss,
+ &am33xx_l4_hs__cpgmac0,
+ NULL,
+};
+
+int __init am33xx_hwmod_init(void)
+{
+ omap_hwmod_init();
+ return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs);
+}
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <linux/power/smartreflex.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
-#include <plat/l3_3xxx.h>
-#include <plat/l4_3xxx.h>
+#include "l3_3xxx.h"
+#include "l4_3xxx.h"
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/mmc.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat/dmtimer.h>
+#include "am35xx.h"
+
+#include "soc.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
-#include <mach/am35xx.h>
/*
* OMAP3xxx hardware module integration data
/* L3 */
static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
- { .irq = INT_34XX_L3_DBG_IRQ },
- { .irq = INT_34XX_L3_APP_IRQ },
- { .irq = -1 }
+ { .irq = 9 + OMAP_INTC_START, },
+ { .irq = 10 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_l3_main_hwmod = {
/* IVA2 (IVA2) */
static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
- { .name = "logic", .rst_shift = 0 },
- { .name = "seq0", .rst_shift = 1 },
- { .name = "seq1", .rst_shift = 2 },
+ { .name = "logic", .rst_shift = 0, .st_shift = 8 },
+ { .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+ { .name = "seq1", .rst_shift = 2, .st_shift = 10 },
};
static struct omap_hwmod omap3xxx_iva_hwmod = {
.rst_lines = omap3xxx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
.main_clk = "iva2_ck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430_IVA2_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+ }
+ },
};
/* timer class */
/* timer12 */
static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
- { .irq = 95, },
- { .irq = -1 }
+ { .irq = 95 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_timer12_hwmod = {
/* UART4 */
static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
- { .irq = INT_36XX_UART4_IRQ, },
- { .irq = -1 }
+ { .irq = 80 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
};
static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
- { .irq = INT_35XX_UART4_IRQ, },
- { .irq = -1 }
+ { .irq = 84 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
};
static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
- { .irq = 25 },
- { .irq = -1 }
+ { .irq = 25 + OMAP_INTC_START, },
+ { .irq = -1 },
};
/* dss_dsi1 */
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
- { .irq = INT_34XX_I2C3_IRQ, },
- { .irq = -1 }
+ { .irq = 61 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
/* gpio5 */
static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
- { .irq = -1 }
+ { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
+ { .irq = -1 },
};
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
/* gpio6 */
static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
- { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
- { .irq = -1 }
+ { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
+ { .irq = -1 },
};
static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
- { .name = "common", .irq = 16 },
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
+ { .name = "common", .irq = 16 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
- { .name = "common", .irq = 17 },
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
+ { .name = "common", .irq = 17 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
/* mcbsp3 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
- { .name = "common", .irq = 22 },
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .irq = -1 }
+ { .name = "common", .irq = 22 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 89 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 90 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
/* mcbsp4 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
- { .name = "common", .irq = 23 },
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .irq = -1 }
+ { .name = "common", .irq = 23 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 54 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 55 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
/* mcbsp5 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
- { .name = "common", .irq = 27 },
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .irq = -1 }
+ { .name = "common", .irq = 27 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 81 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 82 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
/* mcbsp2_sidetone */
static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
- { .name = "irq", .irq = 4 },
- { .irq = -1 }
+ { .name = "irq", .irq = 4 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
/* mcbsp3_sidetone */
static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
- { .name = "irq", .irq = 5 },
- { .irq = -1 }
+ { .name = "irq", .irq = 5 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
};
static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
- { .irq = 18 },
- { .irq = -1 }
+ { .irq = 18 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
};
static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
- { .irq = 19 },
- { .irq = -1 }
+ { .irq = 19 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
};
static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+ { .irq = 26 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mailbox_hwmod = {
/* mcspi3 */
static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
- { .name = "irq", .irq = 91 }, /* 91 */
- { .irq = -1 }
+ { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
/* mcspi4 */
static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
- { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
- { .irq = -1 }
+ { .name = "irq", .irq = 48 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
+ { .name = "mc", .irq = 92 + OMAP_INTC_START, },
+ { .name = "dma", .irq = 93 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 71 },
- { .irq = -1 }
+ { .name = "mc", .irq = 71 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_class am35xx_usbotg_class = {
/* MMC/SD/SDIO1 */
static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
- { .irq = 83, },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
/* MMC/SD/SDIO2 */
static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
- { .irq = INT_24XX_MMC2_IRQ, },
- { .irq = -1 }
+ { .irq = 86 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
/* MMC/SD/SDIO3 */
static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
- { .irq = 94, },
- { .irq = -1 }
+ { .irq = 94 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
};
static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
- { .name = "ohci-irq", .irq = 76 },
- { .name = "ehci-irq", .irq = 77 },
- { .irq = -1 }
+ { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
+ { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
};
static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
- { .name = "tll-irq", .irq = 78 },
- { .irq = -1 }
+ { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
};
static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
- { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
- { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
- { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
- { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
- { .irq = -1 }
+ { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, },
+ { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, },
+ { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START },
+ { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START },
+ { .irq = -1 },
};
static struct omap_hwmod_class am35xx_emac_class = {
*/
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/dma.h>
-#include <plat/mcspi.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/mmc.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
};
/* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
.master = &omap44xx_dsp_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
};
/* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
.master = &omap44xx_iva_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
};
/* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "l3_div_ck",
&omap44xx_l4_abe__dmic,
&omap44xx_l4_abe__dmic_dma,
&omap44xx_dsp__iva,
- &omap44xx_dsp__sl2if,
+ /* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
&omap44xx_l3_main_2__dss,
&omap44xx_l4_per__dss,
&omap44xx_l4_per__i2c4,
&omap44xx_l3_main_2__ipu,
&omap44xx_l3_main_2__iss,
- &omap44xx_iva__sl2if,
+ /* &omap44xx_iva__sl2if, */
&omap44xx_l3_main_2__iva,
&omap44xx_l4_wkup__kbd,
&omap44xx_l4_cfg__mailbox,
&omap44xx_l4_cfg__cm_core,
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
- &omap44xx_l3_main_2__sl2if,
+ /* &omap44xx_l3_main_2__sl2if, */
&omap44xx_l4_abe__slimbus1,
&omap44xx_l4_abe__slimbus1_dma,
&omap44xx_l4_per__slimbus2,
#include <plat/omap_hwmod.h>
+#include "common.h"
#include "display.h"
/* Common address space across OMAP2xxx */
#include <linux/kernel.h>
#include <linux/slab.h>
+#include "soc.h"
#include "omap_l3_noc.h"
/*
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ 9 + OMAP44XX_IRQ_GIC_START);
goto err3;
}
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ 10 + OMAP44XX_IRQ_GIC_START);
goto err4;
}
#include <linux/usb.h>
#include <plat/usb.h>
+
+#include "soc.h"
#include "control.h"
/* OMAP control module register for UTMI PHY */
}
oh = omap_hwmod_lookup(opp_def->hwmod_name);
if (!oh || !oh->od) {
- pr_debug("%s: no hwmod or odev for %s, [%d] "
- "cannot add OPPs.\n", __func__,
- opp_def->hwmod_name, i);
+ pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
+ __func__, opp_def->hwmod_name, i);
continue;
}
dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
- dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
- "result=%d\n",
- __func__, opp_def->freq,
- opp_def->hwmod_name, i, r);
+ dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
+ __func__, opp_def->freq,
+ opp_def->hwmod_name, i, r);
} else {
if (!opp_def->default_available)
r = opp_disable(dev, opp_def->freq);
if (r)
- dev_err(dev, "%s: disable %ld failed for %s "
- "[%d] result=%d\n",
+ dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
__func__, opp_def->freq,
opp_def->hwmod_name, i, r);
}
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
-#include <plat/hardware.h>
+#include <linux/kernel.h>
#include "opp2xxx.h"
#include "sdrc.h"
* This is technically part of the OMAP2xxx clock code.
*/
-#include <plat/hardware.h>
+#include <linux/kernel.h>
#include "opp2xxx.h"
#include "sdrc.h"
*/
#include <linux/module.h>
-#include <plat/cpu.h>
-
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
*/
#include <linux/module.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
#include <linux/slab.h>
#include <plat/clock.h>
-#include <plat/board.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
bootup_volt = opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
- pr_err("%s: unable to find voltage corresponding "
- "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+ pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
+ __func__, vdd_name);
goto exit;
}
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/dma.h>
-#include <plat/board.h>
-
-#include <mach/irqs.h>
#include "common.h"
#include "prm2xxx_3xxx.h"
prcm_setup_regs();
- /* Hack to prevent MPU retention when STI console is enabled. */
- {
- const struct omap_sti_console_config *sti;
-
- sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
- struct omap_sti_console_config);
- if (sti != NULL && sti->enable)
- sti_console_enabled = 1;
- }
-
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <trace/events/power.h>
#include <asm/suspend.h>
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
- pr_info("Powerdomain (%s) didn't enter "
- "target state %d\n",
- pwrst->pwrdm->name, pwrst->next_state);
+ pr_info("Powerdomain (%s) didn't enter target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
omap3_secure_ram_storage =
kmalloc(0x803F, GFP_KERNEL);
if (!omap3_secure_ram_storage)
- pr_err("Memory allocation failed when "
- "allocating for secure sram context\n");
+ pr_err("Memory allocation failed when allocating for secure sram context\n");
local_irq_disable();
local_fiq_disable();
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
- pr_info("Powerdomain (%s) didn't enter "
- "target state %d\n",
- pwrst->pwrdm->name, pwrst->next_state);
+ pr_info("Powerdomain (%s) didn't enter target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
- pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
- "wakeup dependency\n");
+ pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
goto err2;
}
#include "prm44xx.h"
#include <asm/cpu.h>
-#include <plat/cpu.h>
+
+#include <plat/prcm.h>
+
#include "powerdomain.h"
#include "clockdomain.h"
-#include <plat/prcm.h>
+#include "soc.h"
#include "pm.h"
#define PWRDM_TRACE_STATES_FLAG (1<<31)
if (!pwrdm || !clkdm)
return -EINVAL;
- pr_debug("powerdomain: associating clockdomain %s with powerdomain "
- "%s\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: associating clockdomain %s\n",
+ pwrdm->name, clkdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
if (!pwrdm->pwrdm_clkdms[i])
}
if (i == PWRDM_MAX_CLKDMS) {
- pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
- "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+ pr_debug("powerdomain: %s: increase PWRDM_MAX_CLKDMS for clkdm %s\n",
+ pwrdm->name, clkdm->name);
WARN_ON(1);
ret = -ENOMEM;
goto pac_exit;
if (!pwrdm || !clkdm)
return -EINVAL;
- pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
- "%s\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: dissociating clockdomain %s\n",
+ pwrdm->name, clkdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
if (pwrdm->pwrdm_clkdms[i] == clkdm)
break;
if (i == PWRDM_MAX_CLKDMS) {
- pr_debug("powerdomain: clkdm %s not associated with pwrdm "
- "%s ?!\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: clkdm %s not associated?!\n",
+ pwrdm->name, clkdm->name);
ret = -ENOENT;
goto pdc_exit;
}
if (!(pwrdm->pwrsts & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+ pr_debug("powerdomain: %s: setting next powerstate to %0x\n",
pwrdm->name, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+ pr_debug("powerdomain: %s: setting next logic powerstate to %0x\n",
pwrdm->name, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next memory powerstate for domain %s "
- "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+ pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-ON to %0x\n",
+ pwrdm->name, bank, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next memory powerstate for domain %s "
- "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+ pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-RET to %0x\n",
+ pwrdm->name, bank, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
* warn & fail if it is not ON.
*/
- pr_debug("powerdomain: clearing previous power state reg for %s\n",
+ pr_debug("powerdomain: %s: clearing previous power state reg\n",
pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return ret;
- pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
- pwrdm->name);
+ pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return ret;
- pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
- pwrdm->name);
+ pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
- printk(KERN_ERR "powerdomain: waited too long for "
- "powerdomain %s to complete transition\n", pwrdm->name);
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
return -EAGAIN;
}
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
- printk(KERN_ERR "powerdomain: waited too long for "
- "powerdomain %s to complete transition\n", pwrdm->name);
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
return -EAGAIN;
}
#include <linux/init.h>
#include <linux/bug.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
-
#include "prcm-common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "common.h"
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "clock.h"
#include "clock2xxx.h"
MAX_MODULE_ENABLE_WAIT, i);
if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("cm: Module associated with clock %s ready after %d "
- "loops\n", name, i);
+ pr_debug("cm: Module associated with clock %s ready after %d loops\n",
+ name, i);
else
- pr_err("cm: Module associated with clock %s didn't enable in "
- "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+ pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
};
#include <linux/io.h>
#include <linux/irq.h>
-#include "common.h"
-#include <plat/cpu.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
+#include "soc.h"
+#include "common.h"
#include "vp.h"
#include "prm2xxx_3xxx.h"
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
- .irq = INT_34XX_PRCM_MPU_IRQ,
+ .irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/irqs.h>
#include <plat/prcm.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "vp.h"
.nr_regs = 2,
.irqs = omap4_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
- .irq = OMAP44XX_IRQ_PRCM,
+ .irq = 11 + OMAP44XX_IRQ_GIC_START,
.read_pending_irqs = &omap44xx_prm_read_pending_irqs,
.ocp_barrier = &omap44xx_prm_ocp_barrier,
.save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
#include <plat/common.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include <plat/omap-serial.h>
#include "common.h"
-#include <plat/board.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
+#include <plat/serial.h>
#include "prm2xxx_3xxx.h"
#include "pm.h"
};
#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
if (!od)
* in Smartidle Mode When Configured for DMA Operations.
* WA: configure uart in force idle mode.
*/
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
}
#else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
if (console_loglevel >= 10) {
uart_debug = true;
- pr_info("%s used as console in debug mode"
- " uart%d clocks will not be"
- " gated", uart_name, uart->num);
+ pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
+ uart_name, uart->num);
}
if (cmdline_find_option("no_console_suspend"))
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
+ omap_up.DTR_gpio = info->DTR_gpio;
+ omap_up.DTR_inverted = info->DTR_inverted;
+ omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
NULL, 0, false);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
- name, oh->name);
+ if (IS_ERR(pdev)) {
+ WARN(1, "Could not build omap_device for %s: %s.\n", name,
+ oh->name);
+ return;
+ }
if ((console_uart_id == bdata->id) && no_console_suspend)
omap_device_disable_idle_on_suspend(pdev);
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <plat/omap24xx.h>
-
+#include "omap24xx.h"
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
#include <asm/assembler.h>
-#include <plat/hardware.h>
#include <plat/sram.h>
+#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include <asm/memory.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
--- /dev/null
+#include <plat/cpu.h>
+#include "omap24xx.h"
+#include "omap34xx.h"
+#include "omap44xx.h"
+#include "ti81xx.h"
+#include "am33xx.h"
+#include "omap54xx.h"
sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
if (!sr_data) {
- pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
- __func__, oh->name);
+ pr_err("%s: Unable to allocate memory for %s sr_data\n",
+ __func__, oh->name);
return -ENOMEM;
}
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
- pr_err("%s: No voltage domain specified for %s."
- "Cannot initialize\n", __func__,
- oh->name);
+ pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+ __func__, oh->name);
goto exit;
}
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
- pr_warning("%s: No Voltage table registered fo VDD%d."
- "Something really wrong\n\n", __func__, i + 1);
+ pr_err("%s: No Voltage table registered for VDD%d\n",
+ __func__, i + 1);
goto exit;
}
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
#include "cm2xxx_3xxx.h"
--- /dev/null
+/*
+ * This file contains the address data for various TI81XX modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI81XX_H
+#define __ASM_ARCH_TI81XX_H
+
+#define L4_SLOW_TI81XX_BASE 0x48000000
+
+#define TI81XX_SCM_BASE 0x48140000
+#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
+#define TI81XX_PRCM_BASE 0x48180000
+
+#define TI81XX_ARM_INTC_BASE 0x48200000
+
+#endif /* __ASM_ARCH_TI81XX_H */
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <asm/mach/time.h>
-#include <plat/dmtimer.h>
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include "common.h"
+
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/dmtimer.h>
#include <plat/omap-pm.h>
+#include "soc.h"
+#include "common.h"
#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = (void *)&clkev;
+ omap2_gp_timer_irq.dev_id = &clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
return 0;
}
+#ifdef CONFIG_OMAP_32K_TIMER
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
{
return ret;
}
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+ return -ENODEV;
+}
+#endif
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
const char *fck_source)
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- OMAP44XX_LOCAL_TWD_BASE,
- OMAP44XX_IRQ_LOCALTIMER);
+ OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
#endif
static void __init omap4_timer_init(void)
if (omap_rev() != OMAP4430_REV_ES1_0) {
int err;
+ if (of_have_populated_dt()) {
+ twd_local_timer_of_register();
+ return;
+ }
+
err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
#include <plat/i2c.h>
#include <plat/usb.h>
+#include "soc.h"
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
- omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+ omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START;
omap4_i2c1_board_info[0].platform_data = pmic_data;
/* TWL6040 audio IC part */
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
-#include <plat/irqs.h>
+#include "common.h"
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
- omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+ omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
}
static inline void omap3_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
- omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+ omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
#include <asm/io.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
-
#include <linux/usb/musb.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/am35xx.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
+
+#include "am35xx.h"
+
#include "mux.h"
static struct musb_hdrc_config musb_config = {
#include <linux/init.h>
#include <linux/bug.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "voltage.h"
#include "vc.h"
#include "prm-regbits-34xx.h"
}
if (!voltdm->pmic->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, voltdm->name);
+ pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n",
+ __func__, voltdm->name);
return -ENODATA;
}
return &voltdm->volt_data[i];
}
- pr_notice("%s: Unable to match the current voltage with the voltage"
- "table for vdd_%s\n", __func__, voltdm->name);
+ pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n",
+ __func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
voltdm->scale = omap_vc_bypass_scale;
return;
default:
- pr_warning("%s: Trying to change the method of voltage scaling"
- "to an unsupported one!\n", __func__);
+ pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n",
+ __func__);
}
}
if (!voltdm || !pwrdm)
return -EINVAL;
- pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
- "%s\n", pwrdm->name, voltdm->name);
+ pr_debug("voltagedomain: %s: associating powerdomain %s\n",
+ voltdm->name, pwrdm->name);
list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
#include <linux/err.h>
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
#include "vc.h"
#include "vp.h"
#include <linux/err.h>
#include <linux/init.h>
+#include "soc.h"
#include "common.h"
-#include <plat/cpu.h>
-
#include "prm-regbits-34xx.h"
#include "omap_opp_data.h"
#include "voltage.h"
udelay(1);
}
if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, voltdm->name);
+ pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted",
+ __func__, voltdm->name);
return -ETIMEDOUT;
}
omap_test_timeout(vp->common->ops->check_txdone(vp->id),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, voltdm->name);
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
}
if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
+ pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",
__func__, voltdm->name);
/* Clear force bit */
/* If VP is already disabled, do nothing. Return */
if (!vp->enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
+ pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",
+ __func__, voltdm->name);
return;
}
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
.pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
.length = ORION5X_REGS_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = ORION5X_PCIE_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
- .length = ORION5X_PCIE_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ORION5X_PCI_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
- .length = ORION5X_PCI_IO_SIZE,
- .type = MT_DEVICE,
}, {
.virtual = ORION5X_PCIE_WA_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/pci.h>
#include <asm/system_info.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <mach/orion5x.h>
-#include <asm/sizes.h>
-
-#define IO_SPACE_LIMIT SZ_2M
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-#endif
* fc000000 device bus mappings (cs0/cs1)
*
* virt phys size
- * fdd00000 f1000000 1M on-chip peripheral registers
- * fde00000 f2000000 1M PCIe I/O space
- * fdf00000 f2100000 1M PCI I/O space
- * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
+ * fe000000 f1000000 1M on-chip peripheral registers
+ * fee00000 f2000000 64K PCIe I/O space
+ * fee10000 f2100000 64K PCI I/O space
+ * fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
****************************************************************************/
#define ORION5X_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_VIRT_BASE 0xfdd00000
+#define ORION5X_REGS_VIRT_BASE 0xfe000000
#define ORION5X_REGS_SIZE SZ_1M
#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000
#define ORION5X_PCIE_IO_BUS_BASE 0x00000000
-#define ORION5X_PCIE_IO_SIZE SZ_1M
+#define ORION5X_PCIE_IO_SIZE SZ_64K
#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE 0x00100000
-#define ORION5X_PCI_IO_SIZE SZ_1M
+#define ORION5X_PCI_IO_BUS_BASE 0x00010000
+#define ORION5X_PCI_IO_SIZE SZ_64K
#define ORION5X_SRAM_PHYS_BASE (0xf2200000)
#define ORION5X_SRAM_SIZE SZ_8K
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
+#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000
#define ORION5X_PCIE_WA_SIZE SZ_16M
#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
pcie_ops.read = pcie_rd_conf_wa;
}
+ pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+
/*
* Request resources.
*/
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("pcie_setup unable to alloc resources");
- /*
- * IORESOURCE_IO
- */
- sys->io_offset = 0;
- res[0].name = "PCIe I/O Space";
- res[0].flags = IORESOURCE_IO;
- res[0].start = ORION5X_PCIE_IO_BUS_BASE;
- res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
- if (request_resource(&ioport_resource, &res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
/*
* IORESOURCE_MEM
*/
- res[1].name = "PCIe Memory Space";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
- res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
- if (request_resource(&iomem_resource, &res[1]))
+ res->name = "PCIe Memory Space";
+ res->flags = IORESOURCE_MEM;
+ res->start = ORION5X_PCIE_MEM_PHYS_BASE;
+ res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, res))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
*/
orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+ pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+
/*
* Request resources
*/
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("pci_setup unable to alloc resources");
- /*
- * IORESOURCE_IO
- */
- sys->io_offset = 0;
- res[0].name = "PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
- res[0].start = ORION5X_PCI_IO_BUS_BASE;
- res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
- if (request_resource(&ioport_resource, &res[0]))
- panic("Request PCI IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
/*
* IORESOURCE_MEM
*/
- res[1].name = "PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
- res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
- if (request_resource(&iomem_resource, &res[1]))
+ res->name = "PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
+ res->start = ORION5X_PCI_MEM_PHYS_BASE;
+ res->end = res->start + ORION5X_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, res))
panic("Request PCI Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
--- /dev/null
+config ARCH_PICOXCELL
+ bool "Picochip PicoXcell" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_TCM
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
#include "common.h"
-#define WDT_CTRL_REG_EN_MASK (1 << 0)
-#define WDT_CTRL_REG_OFFS (0x00)
-#define WDT_TIMEOUT_REG_OFFS (0x04)
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+
+#define WDT_CTRL_REG_EN_MASK (1 << 0)
+#define WDT_CTRL_REG_OFFS (0x00)
+#define WDT_TIMEOUT_REG_OFFS (0x04)
static void __iomem *wdt_regs;
/*
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
- */
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#define UART_SHIFT 2
-
- .macro addruart, rp, rv, tmp
- ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
- ldr \rp, =PICOXCELL_UART1_BASE
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_TX << UART_SHIFT]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1002b
- .endm
-
- /* The UART's don't have any flow control IO's wired up. */
- .macro waituart,rd,rx
- .endm
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/picoxcell_soc.h>
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_MAP_H__
-#define __PICOXCELL_MAP_H__
-
-#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
-
-#ifdef __ASSEMBLY__
-#define IO_ADDRESS(x) PHYS_TO_IO((x))
-#else
-#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
-#endif
-
-#endif /* __PICOXCELL_MAP_H__ */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE 0x80230000
-#define PICOXCELL_PERIPH_BASE 0x80000000
-#define PICOXCELL_PERIPH_LENGTH SZ_4M
-#define PICOXCELL_VIC0_BASE 0x80060000
-#define PICOXCELL_VIC1_BASE 0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __TIMEX_H__
-#define __TIMEX_H__
-
-/* Bogus value to allow the kernel to compile. */
-#define CLOCK_TICK_RATE 1000000
-
-#endif /* __TIMEX_H__ */
-
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m :=
-obj-n :=
-obj- :=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
+++ /dev/null
- zreladdr-y += 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
-
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Generic clock management functions are partially based on:
- * linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
- local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
- local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
- struct clk *tmp_clk;
-
- tmp_clk = clk;
- while (tmp_clk->propagate_next) {
- tmp_clk = tmp_clk->propagate_next;
- local_set_rate(tmp_clk, tmp_clk->user_rate);
- }
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
- if (clk->enable_reg)
- __raw_writel(__raw_readl(clk->enable_reg) &
- ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
- if (clk->enable_reg)
- __raw_writel(__raw_readl(clk->enable_reg) |
- (1 << clk->enable_shift), clk->enable_reg);
- return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
- if (clk->enable_reg1)
- __raw_writel(__raw_readl(clk->enable_reg1) &
- ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
- if (clk->enable_reg1)
- __raw_writel(__raw_readl(clk->enable_reg1) |
- (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
- int i;
- i = 0;
- while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */
-
- if (!(__raw_readl(clk->scale_reg) & 1)) {
- printk(KERN_ERR
- "%s ERROR: failed to lock, scale reg data: %x\n",
- clk->name, __raw_readl(clk->scale_reg));
- return -1;
- }
- return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
- int i;
- int ret;
- u32 tmp_reg;
-
- ret = 0;
-
- if (!clk->rate)
- clk_reg_enable1(clk);
-
- tmp_reg = __raw_readl(clk->parent_switch_reg);
- /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
- if (!(tmp_reg & 1)) {
- tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */
- __raw_writel(tmp_reg, clk->parent_switch_reg);
- i = 0;
- while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */
-
- if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
- printk(KERN_ERR
- "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
- clk->name, __raw_readl(clk->parent_switch_reg));
- ret = -1;
- }
- }
-
- if (!clk->rate)
- clk_reg_disable1(clk);
-
- return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
- int i;
- int ret;
- u32 tmp_reg;
-
- ret = 0;
-
- if (!clk->rate)
- clk_reg_enable1(clk);
-
- tmp_reg = __raw_readl(clk->parent_switch_reg);
- /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
- if (tmp_reg & 1) {
- tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */
- __raw_writel(tmp_reg, clk->parent_switch_reg);
- i = 0;
- while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */
-
- if (__raw_readl(clk->parent_switch_reg) & 1) {
- printk(KERN_ERR
- "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
- clk->name, __raw_readl(clk->parent_switch_reg));
- ret = -1;
- }
- }
-
- if (!clk->rate)
- clk_reg_disable1(clk);
-
- return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
-
- if (parent == &ck_13MHz)
- ret = switch_to_clean_13mhz(clk);
- else if (parent == &ck_pll1)
- ret = switch_to_dirty_13mhz(clk);
-
- return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp_reg, tmp_m, tmp_2p, i;
- u32 parent_rate;
- int ret = -EINVAL;
-
- parent_rate = clk->parent->rate;
-
- if (!parent_rate)
- goto out;
-
- /* set direct run for ARM or disable output for others */
- clk_reg_disable(clk);
-
- /* disable source input as well (ignored for ARM) */
- clk_reg_disable1(clk);
-
- tmp_reg = __raw_readl(clk->scale_reg);
- tmp_reg &= ~0x1ffff; /*clear all settings, power down */
- __raw_writel(tmp_reg, clk->scale_reg);
-
- rate -= rate % parent_rate; /*round down the input */
-
- if (rate > PLL160_MAX_FCCO)
- rate = PLL160_MAX_FCCO;
-
- if (!rate) {
- clk->rate = 0;
- ret = 0;
- goto out;
- }
-
- clk_reg_enable1(clk);
- tmp_reg = __raw_readl(clk->scale_reg);
-
- if (rate == parent_rate) {
- /*enter direct bypass mode */
- tmp_reg |= ((1 << 14) | (1 << 15));
- __raw_writel(tmp_reg, clk->scale_reg);
- clk->rate = parent_rate;
- clk_reg_enable(clk);
- ret = 0;
- goto out;
- }
-
- i = 0;
- for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
- if (rate * tmp_2p >= PLL160_MIN_FCCO)
- break;
- i++;
- }
-
- if (tmp_2p > 1)
- tmp_reg |= ((i - 1) << 11);
- else
- tmp_reg |= (1 << 14); /*direct mode, no divide */
-
- tmp_m = rate * tmp_2p;
- tmp_m /= parent_rate;
-
- tmp_reg |= (tmp_m - 1) << 1; /*calculate M */
- tmp_reg |= (1 << 16); /*power up PLL */
- __raw_writel(tmp_reg, clk->scale_reg);
-
- if (clk_wait_for_pll_lock(clk) < 0) {
- clk_reg_disable(clk);
- clk_reg_disable1(clk);
-
- tmp_reg = __raw_readl(clk->scale_reg);
- tmp_reg &= ~0x1ffff; /*clear all settings, power down */
- __raw_writel(tmp_reg, clk->scale_reg);
- clk->rate = 0;
- ret = -EFAULT;
- goto out;
- }
-
- clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
-
- clk_reg_enable(clk);
- ret = 0;
-
-out:
- return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp;
-
- tmp = __raw_readl(clk->scale_reg);
- tmp &= ~(0x1f << 2);
- tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
- __raw_writel(tmp, clk->scale_reg);
- clk->rate = rate;
- return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp;
- tmp = __raw_readl(clk->scale_reg);
- tmp = tmp & ~0x3;
- switch (rate) {
- case 1:
- break;
- case 2:
- tmp |= 1;
- break;
- case 4:
- tmp |= 2;
- break;
- }
-
- __raw_writel(tmp, clk->scale_reg);
- clk->rate = rate;
- return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
- switch (rate) {
- case 1:
- case 4:
- return rate;
- }
- return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
- return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_enable(clk);
- clk->rate = 1;
- } else {
- clk_reg_disable(clk);
- clk->rate = 0;
- }
- return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- clk->rate = 1;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
- return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
- if (rate > CLK_RATE_208MHZ)
- rate = CLK_RATE_208MHZ;
- if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
- rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
- return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
- if (rate > CLK_RATE_208MHZ)
- rate = CLK_RATE_208MHZ;
- return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- udelay(500);
- clk->rate = CLK_RATE_13MHZ;
- ck_1MHz.rate = CLK_RATE_1MHZ;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- ck_1MHz.rate = 0;
- }
- return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- if (!clk_wait_for_pll_lock(clk)) {
- clk->rate = CLK_RATE_13MHZ;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
-
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
-#endif
- return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
- .name = "osc_13MHz",
- .flags = FIXED_RATE,
- .rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
- .name = "ck_13MHz",
- .parent = &osc_13MHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &ck_13MHz_round_rate,
- .set_rate = &ck_13MHz_set_rate,
- .enable_reg = OSC13CTRL_REG,
- .enable_shift = 0,
- .rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
- .name = "osc_32KHz",
- .flags = FIXED_RATE,
- .rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
- .name = "ck_1MHz",
- .flags = FIXED_RATE | PARENT_SET_RATE,
- .parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
- .name = "ck_pll1",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &ck_13MHz_round_rate,
- .set_rate = &pll1_set_rate,
- .enable_reg = PLLCTRL_REG,
- .enable_shift = 1,
- .scale_reg = PLLCTRL_REG,
- .rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
- .name = "ck_pll4",
- .parent = &ck_pll1,
- .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
- .propagate_next = &per_ck,
- .round_rate = &pll4_round_rate,
- .set_rate = &pll160_set_rate,
- .rate = CLK_RATE_208MHZ,
- .scale_reg = HCLKPLLCTRL_REG,
- .enable_reg = PWRCTRL_REG,
- .enable_shift = 2,
- .parent_switch_reg = SYSCLKCTRL_REG,
- .set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
- .name = "ck_pll5",
- .parent = &ck_1MHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &pll5_round_rate,
- .set_rate = &pll160_set_rate,
- .scale_reg = USBCTRL_REG,
- .enable_reg = USBCTRL_REG,
- .enable_shift = 18,
- .enable_reg1 = USBCTRL_REG,
- .enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
- .name = "ck_pll3",
- .parent = &ck_pll1,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &pll3_round_rate,
- .set_rate = &pll160_set_rate,
- .scale_reg = DSPPLLCTRL_REG,
- .enable_reg = DSPCLKCTRL_REG,
- .enable_shift = 3,
- .enable_reg1 = DSPCLKCTRL_REG,
- .enable_shift1 = 2,
- .parent_switch_reg = DSPCLKCTRL_REG,
- .set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
- .name = "hclk_ck",
- .parent = &ck_pll4,
- .flags = PARENT_SET_RATE,
- .set_rate = &hclk_set_rate,
- .round_rate = &hclk_round_rate,
- .scale_reg = HCLKDIVCTRL_REG,
- .rate = 2,
- .user_rate = 2,
-};
-
-static struct clk per_ck = {
- .name = "per_ck",
- .parent = &ck_pll4,
- .flags = FIXED_RATE,
- .propagate_next = &hclk_ck,
- .set_rate = &per_clk_set_rate,
- .round_rate = &per_clk_round_rate,
- .scale_reg = HCLKDIVCTRL_REG,
- .rate = CLK_RATE_13MHZ,
- .user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
- .name = "m2hclk_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_inv_set_rate,
- .rate = 1,
- .enable_shift = 6,
- .enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
- .name = "vfp9_ck",
- .parent = &ck_pll4,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 4,
- .enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
- .name = "keyscan_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
- .name = "touch_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
- .name = "pwm1_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
- .name = "pwm2_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 2,
- .enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
- .name = "jpeg_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
- .name = "ms_ck",
- .parent = &ck_pll4,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 5,
- .enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
- .name = "dum_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
- .name = "flash_ck",
- .parent = &hclk_ck,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 1, /* Only MLC clock supported */
- .enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
- .name = "i2c0_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 0,
- .enable_reg = I2CCLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
- .name = "i2c1_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 1,
- .enable_reg = I2CCLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
- .name = "i2c2_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 2,
- .enable_reg = USB_OTG_CLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
- .name = "spi0_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
- .name = "spi1_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 4,
- .enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
- .name = "dma_ck",
- .parent = &hclk_ck,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
- .name = "uart3_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 0,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
- .name = "uart4_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 1,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
- .name = "uart5_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 2,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
- .name = "uart6_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 3,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
- .name = "wdt_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .enable_shift = 0,
- .enable_reg = TIMCLKCTRL_REG,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
- &ck_13MHz,
- &ck_pll1,
- &ck_pll4,
- &ck_pll5,
- &ck_pll3,
- &vfp9_ck,
- &m2hclk_ck,
- &hclk_ck,
- &dma_ck,
- &flash_ck,
- &dum_ck,
- &keyscan_ck,
- &pwm1_ck,
- &pwm2_ck,
- &jpeg_ck,
- &ms_ck,
- &touch_ck,
- &i2c0_ck,
- &i2c1_ck,
- &i2c2_ck,
- &spi0_ck,
- &spi1_ck,
- &uart3_ck,
- &uart4_ck,
- &uart5_ck,
- &uart6_ck,
- &wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
- { .clk = &ck_13MHz, .con_id = "ck_13MHz" },
- { .clk = &ck_pll1, .con_id = "ck_pll1" },
- { .clk = &ck_pll4, .con_id = "ck_pll4" },
- { .clk = &ck_pll5, .con_id = "ck_pll5" },
- { .clk = &ck_pll3, .con_id = "ck_pll3" },
- { .clk = &vfp9_ck, .con_id = "vfp9_ck" },
- { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" },
- { .clk = &hclk_ck, .con_id = "hclk_ck" },
- { .clk = &dma_ck, .con_id = "dma_ck" },
- { .clk = &flash_ck, .con_id = "flash_ck" },
- { .clk = &dum_ck, .con_id = "dum_ck" },
- { .clk = &keyscan_ck, .con_id = "keyscan_ck" },
- { .clk = &pwm1_ck, .con_id = "pwm1_ck" },
- { .clk = &pwm2_ck, .con_id = "pwm2_ck" },
- { .clk = &jpeg_ck, .con_id = "jpeg_ck" },
- { .clk = &ms_ck, .con_id = "ms_ck" },
- { .clk = &touch_ck, .con_id = "touch_ck" },
- { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" },
- { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" },
- { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" },
- { .clk = &spi0_ck, .con_id = "spi0_ck" },
- { .clk = &spi1_ck, .con_id = "spi1_ck" },
- { .clk = &uart3_ck, .con_id = "uart3_ck" },
- { .clk = &uart4_ck, .con_id = "uart4_ck" },
- { .clk = &uart5_ck, .con_id = "uart5_ck" },
- { .clk = &uart6_ck, .con_id = "uart6_ck" },
- { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
- if (WARN_ON(clk->usecount == 0))
- return;
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
- clk->set_rate(clk, 0);
- if (clk->parent)
- local_clk_disable(clk->parent);
- }
-}
-
-static int local_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount == 0) {
- if (clk->parent) {
- ret = local_clk_enable(clk->parent);
- if (ret != 0)
- goto out;
- }
-
- if (clk->enable)
- ret = clk->enable(clk);
- else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
- && clk->user_rate)
- ret = clk->set_rate(clk, clk->user_rate);
-
- if (ret != 0 && clk->parent) {
- local_clk_disable(clk->parent);
- goto out;
- }
-
- clk->usecount++;
- }
-out:
- return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
- int ret = -EINVAL;
- if (clk->set_rate) {
-
- if (clk->user_rate == clk->rate && clk->parent->rate) {
- /* if clock enabled or rate not set */
- clk->user_rate = clk->round_rate(clk, rate);
- ret = clk->set_rate(clk, clk->user_rate);
- } else
- clk->user_rate = clk->round_rate(clk, rate);
- ret = 0;
- }
- return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk->flags & FIXED_RATE)
- goto out;
-
- clock_lock();
- if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
- clk->user_rate = clk->round_rate(clk, rate);
- /* parent clock needs to be refreshed
- for the setting to take effect */
- } else {
- ret = local_set_rate(clk, rate);
- }
- ret = 0;
- clock_unlock();
-
-out:
- return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long ret;
- clock_lock();
- ret = clk->rate;
- clock_unlock();
- return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
- int ret;
-
- clock_lock();
- ret = local_clk_enable(clk);
- clock_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- clock_lock();
- local_clk_disable(clk);
- clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- long ret;
- clock_lock();
- if (clk->round_rate)
- ret = clk->round_rate(clk, rate);
- else
- ret = clk->rate;
- clock_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -ENODEV;
- if (!clk->set_parent)
- goto out;
-
- clock_lock();
- ret = clk->set_parent(clk, parent);
- if (!ret)
- clk->parent = parent;
- clock_unlock();
-
-out:
- return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
- struct clk **clkp;
-
- /* Disable autoclocking, as it doesn't seem to work */
- __raw_writel(0xff, AUTOCLK_CTRL);
-
- for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
- clkp++) {
- struct clk *clk = *clkp;
- if (clk->flags & NEEDS_INITIALIZATION) {
- if (clk->set_rate) {
- clk->user_rate = clk->rate;
- local_set_rate(clk, clk->user_rate);
- if (clk->set_parent)
- clk->set_parent(clk, clk->parent);
- }
- if (clk->enable && clk->usecount)
- clk->enable(clk);
- if (clk->disable && !clk->usecount)
- clk->disable(clk);
- }
- pr_debug("%s: clock %s, rate %ld\n",
- __func__, clk->name, clk->rate);
- }
-
- local_clk_enable(&ck_pll4);
-
- /* if ck_13MHz is not used, disable it. */
- if (ck_13MHz.usecount == 0)
- local_clk_disable(&ck_13MHz);
-
- /* Disable autoclocking */
- __raw_writeb(0xff, AUTOCLK_CTRL);
-
- clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
- return 0;
-}
-
-arch_initcall(clk_init);
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
- const char *name;
- struct clk *parent;
- struct clk *propagate_next;
- u32 rate;
- u32 user_rate;
- s8 usecount;
- u32 flags;
- u32 scale_reg;
- u8 enable_shift;
- u32 enable_reg;
- u8 enable_shift1;
- u32 enable_reg1;
- u32 parent_switch_reg;
- u32(*round_rate) (struct clk *, u32);
- int (*set_rate) (struct clk *, u32);
- int (*set_parent) (struct clk * clk, struct clk * parent);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE (1<<2)
-#define FIXED_RATE (1<<3)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
- {
- .start = PNX4008_SPI1_BASE,
- .end = PNX4008_SPI1_BASE + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = PER_SPI1_REC_XMIT,
- .flags = IORESOURCE_DMA,
- }, {
- .start = SPI1_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .flags = 0,
- },
-};
-
-struct resource spipnx_1_resources[] = {
- {
- .start = PNX4008_SPI2_BASE,
- .end = PNX4008_SPI2_BASE + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = PER_SPI2_REC_XMIT,
- .flags = IORESOURCE_DMA,
- }, {
- .start = SPI2_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .flags = 0,
- }
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- },
-};
-
-static struct platform_device spipnx_1 = {
- .name = "spipnx",
- .id = 1,
- .num_resources = ARRAY_SIZE(spipnx_0_resources),
- .resource = spipnx_0_resources,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-static struct platform_device spipnx_2 = {
- .name = "spipnx",
- .id = 2,
- .num_resources = ARRAY_SIZE(spipnx_1_resources),
- .resource = spipnx_1_resources,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
- {
- .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
- .mapbase = (unsigned long)PNX4008_UART5_BASE,
- .irq = IIR5_INT,
- .uartclk = PNX4008_UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
- },
- {
- .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
- .mapbase = (unsigned long)PNX4008_UART3_BASE,
- .irq = IIR3_INT,
- .uartclk = PNX4008_UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
- },
- {}
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = &platform_serial_ports,
- },
-};
-
-static struct platform_device nand_flash_device = {
- .name = "pnx4008-flash",
- .id = -1,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
- {
- .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
- .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
- .flags = IORESOURCE_MEM,
- }, {
- .start = USB_HOST_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ohci_device = {
- .name = "pnx4008-usb-ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(ohci_resources),
- .resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
- .name = "pnx4008-sdum",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device rgbfb_device = {
- .name = "pnx4008-rgbfb",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- }
-};
-
-struct resource watchdog_resources[] = {
- {
- .start = PNX4008_WDOG_BASE,
- .end = PNX4008_WDOG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device watchdog_device = {
- .name = "pnx4008-watchdog",
- .id = -1,
- .num_resources = ARRAY_SIZE(watchdog_resources),
- .resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &spipnx_1,
- &spipnx_2,
- &serial_device,
- &ohci_device,
- &nand_flash_device,
- &sdum_device,
- &rgbfb_device,
- &watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
- /*disable all START interrupt sources,
- and clear all START interrupt flags */
- __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
- __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- /* Switch on the UART clocks */
- pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
- {
- .virtual = IO_ADDRESS(PNX4008_IRAM_BASE),
- .pfn = __phys_to_pfn(PNX4008_IRAM_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
- .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
- .length = SZ_1M - SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
- .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
- .length = SZ_128K * 3,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
- .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE),
- .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-void __init pnx4008_map_io(void)
-{
- iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
- soft_restart(0);
-}
-
-#ifdef CONFIG_PM
-extern int pnx4008_pm_init(void);
-#else
-static inline int pnx4008_pm_init(void) { return 0; }
-#endif
-
-void __init pnx4008_init_late(void)
-{
- pnx4008_pm_init();
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
- /* Maintainer: MontaVista Software Inc. */
- .atag_offset = 0x100,
- .map_io = pnx4008_map_io,
- .init_irq = pnx4008_init_irq,
- .init_machine = pnx4008_init,
- .init_late = pnx4008_init_late,
- .timer = &pnx4008_timer,
- .restart = pnx4008_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-pnx4008/dma.c
- *
- * PNX4008 DMA registration and IRQ dispatching
- *
- * Author: Vitaly Wool
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * Based on the code from Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
- char *name;
- void (*irq_handler) (int, int, void *);
- void *data;
- struct pnx4008_dma_ll *ll;
- u32 ll_dma;
- void *target_addr;
- int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
- void *vaddr;
- void *cur;
- dma_addr_t dma_addr;
- int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
- struct pnx4008_dma_ll *ll = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&ll_lock, flags);
- if (ll_pool.count > 4) { /* can give one more */
- ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
- *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
- *(void **)ll_pool.cur = **(void ***)ll_pool.cur;
- memset(ll, 0, sizeof(*ll));
- ll_pool.count--;
- }
- spin_unlock_irqrestore(&ll_lock, flags);
-
- return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
- unsigned long flags;
-
- if (ll) {
- if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
- printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
- BUG();
- }
-
- if (ll->flags & DMA_BUFFER_ALLOCATED)
- ll->free(ll->alloc_data);
-
- spin_lock_irqsave(&ll_lock, flags);
- *(long *)ll = *(long *)ll_pool.cur;
- *(long *)ll_pool.cur = (long)ll;
- ll_pool.count++;
- spin_unlock_irqrestore(&ll_lock, flags);
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
- struct pnx4008_dma_ll *ptr;
- u32 dma;
-
- while (ll) {
- dma = ll->next_dma;
- ptr = ll->next;
- pnx4008_free_ll_entry(ll, ll_dma);
-
- ll_dma = dma;
- ll = ptr;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
- if (!dma_channels_requested++) {
- struct clk *clk = clk_get(0, "dma_ck");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 1);
- clk_put(clk);
- }
- pnx4008_config_dma(-1, -1, 1);
- }
-}
-static inline void dma_decrement_usage(void)
-{
- if (!--dma_channels_requested) {
- struct clk *clk = clk_get(0, "dma_ck");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 0);
- clk_put(clk);
- }
- pnx4008_config_dma(-1, -1, 0);
-
- }
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
- spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
- spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
- void (*irq_handler) (int, int, void *), void *data)
-{
- int i, found = 0;
-
- /* basic sanity checks */
- if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
- return -EINVAL;
-
- pnx4008_dma_lock();
-
- /* try grabbing a DMA channel with the requested priority */
- for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
- if (!dma_channels[i].name && (ch == -1 || ch == i)) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- dma_increment_usage();
- dma_channels[i].name = name;
- dma_channels[i].irq_handler = irq_handler;
- dma_channels[i].data = data;
- dma_channels[i].ll = NULL;
- dma_channels[i].ll_dma = 0;
- } else {
- printk(KERN_WARNING "No more available DMA channels for %s\n",
- name);
- i = -ENODEV;
- }
-
- pnx4008_dma_unlock();
- return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
- if (!dma_channels[ch].name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, ch);
- return;
- }
-
- pnx4008_dma_lock();
- pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
- dma_channels[ch].ll = NULL;
- dma_decrement_usage();
-
- dma_channels[ch].name = NULL;
- pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
- unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
- switch (ahb_m1_be) {
- case 0:
- dma_cfg &= ~(1 << 1);
- break;
- case 1:
- dma_cfg |= (1 << 1);
- break;
- default:
- break;
- }
-
- switch (ahb_m2_be) {
- case 0:
- dma_cfg &= ~(1 << 2);
- break;
- case 1:
- dma_cfg |= (1 << 2);
- break;
- default:
- break;
- }
-
- switch (enable) {
- case 0:
- dma_cfg &= ~(1 << 0);
- break;
- case 1:
- dma_cfg |= (1 << 0);
- break;
- default:
- break;
- }
-
- pnx4008_dma_lock();
- __raw_writel(dma_cfg, DMAC_CONFIG);
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
- unsigned long *ctrl)
-{
- int i = 0, dbsize, sbsize, err = 0;
-
- if (!ctrl || !ch_ctrl) {
- err = -EINVAL;
- goto out;
- }
-
- *ctrl = 0;
-
- switch (ch_ctrl->tc_mask) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 31);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
-
- switch (ch_ctrl->cacheable) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 30);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->bufferable) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 29);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->priv_mode) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 28);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->di) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 27);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->si) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 26);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->dest_ahb1) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 25);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->src_ahb1) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 24);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->dwidth) {
- case WIDTH_BYTE:
- *ctrl &= ~(7 << 21);
- break;
- case WIDTH_HWORD:
- *ctrl &= ~(7 << 21);
- *ctrl |= (1 << 21);
- break;
- case WIDTH_WORD:
- *ctrl &= ~(7 << 21);
- *ctrl |= (2 << 21);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->swidth) {
- case WIDTH_BYTE:
- *ctrl &= ~(7 << 18);
- break;
- case WIDTH_HWORD:
- *ctrl &= ~(7 << 18);
- *ctrl |= (1 << 18);
- break;
- case WIDTH_WORD:
- *ctrl &= ~(7 << 18);
- *ctrl |= (2 << 18);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- dbsize = ch_ctrl->dbsize;
- while (!(dbsize & 1)) {
- i++;
- dbsize >>= 1;
- }
- if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
- err = -EINVAL;
- goto out;
- } else if (i > 1)
- i--;
- *ctrl &= ~(7 << 15);
- *ctrl |= (i << 15);
-
- sbsize = ch_ctrl->sbsize;
- while (!(sbsize & 1)) {
- i++;
- sbsize >>= 1;
- }
- if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
- err = -EINVAL;
- goto out;
- } else if (i > 1)
- i--;
- *ctrl &= ~(7 << 12);
- *ctrl |= (i << 12);
-
- if (ch_ctrl->tr_size > 0x7ff) {
- err = -E2BIG;
- goto out;
- }
- *ctrl &= ~0x7ff;
- *ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
- struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
- int err = 0;
-
- if (!ch_ctrl) {
- err = -EINVAL;
- goto out;
- }
-
- ch_ctrl->tr_size = ctrl & 0x7ff;
- ctrl >>= 12;
-
- ch_ctrl->sbsize = 1 << (ctrl & 7);
- if (ch_ctrl->sbsize > 1)
- ch_ctrl->sbsize <<= 1;
- ctrl >>= 3;
-
- ch_ctrl->dbsize = 1 << (ctrl & 7);
- if (ch_ctrl->dbsize > 1)
- ch_ctrl->dbsize <<= 1;
- ctrl >>= 3;
-
- switch (ctrl & 7) {
- case 0:
- ch_ctrl->swidth = WIDTH_BYTE;
- break;
- case 1:
- ch_ctrl->swidth = WIDTH_HWORD;
- break;
- case 2:
- ch_ctrl->swidth = WIDTH_WORD;
- break;
- default:
- err = -EINVAL;
- goto out;
- }
- ctrl >>= 3;
-
- switch (ctrl & 7) {
- case 0:
- ch_ctrl->dwidth = WIDTH_BYTE;
- break;
- case 1:
- ch_ctrl->dwidth = WIDTH_HWORD;
- break;
- case 2:
- ch_ctrl->dwidth = WIDTH_WORD;
- break;
- default:
- err = -EINVAL;
- goto out;
- }
- ctrl >>= 3;
-
- ch_ctrl->src_ahb1 = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->dest_ahb1 = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->si = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->di = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->priv_mode = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->bufferable = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->cacheable = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->tc_mask = ctrl & 1;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
- unsigned long *cfg)
-{
- int err = 0;
-
- if (!cfg || !ch_cfg) {
- err = -EINVAL;
- goto out;
- }
-
- *cfg = 0;
-
- switch (ch_cfg->halt) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 18);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->active) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 17);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->lock) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 16);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->itc) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 15);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->ie) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 14);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->flow_cntrl) {
- case FC_MEM2MEM_DMA:
- *cfg &= ~(7 << 11);
- break;
- case FC_MEM2PER_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (1 << 11);
- break;
- case FC_PER2MEM_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (2 << 11);
- break;
- case FC_PER2PER_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (3 << 11);
- break;
- case FC_PER2PER_DPER:
- *cfg &= ~(7 << 11);
- *cfg |= (4 << 11);
- break;
- case FC_MEM2PER_PER:
- *cfg &= ~(7 << 11);
- *cfg |= (5 << 11);
- break;
- case FC_PER2MEM_PER:
- *cfg &= ~(7 << 11);
- *cfg |= (6 << 11);
- break;
- case FC_PER2PER_SPER:
- *cfg |= (7 << 11);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- *cfg &= ~(0x1f << 6);
- *cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
- *cfg &= ~(0x1f << 1);
- *cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
- struct pnx4008_dma_ch_config * ch_cfg)
-{
- int err = 0;
-
- if (!ch_cfg) {
- err = -EINVAL;
- goto out;
- }
-
- cfg >>= 1;
-
- ch_cfg->src_per = cfg & 0x1f;
- cfg >>= 5;
-
- ch_cfg->dest_per = cfg & 0x1f;
- cfg >>= 5;
-
- switch (cfg & 7) {
- case 0:
- ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
- break;
- case 1:
- ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
- break;
- case 2:
- ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
- break;
- case 3:
- ch_cfg->flow_cntrl = FC_PER2PER_DMA;
- break;
- case 4:
- ch_cfg->flow_cntrl = FC_PER2PER_DPER;
- break;
- case 5:
- ch_cfg->flow_cntrl = FC_MEM2PER_PER;
- break;
- case 6:
- ch_cfg->flow_cntrl = FC_PER2MEM_PER;
- break;
- case 7:
- ch_cfg->flow_cntrl = FC_PER2PER_SPER;
- }
- cfg >>= 3;
-
- ch_cfg->ie = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->itc = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->lock = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->active = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->halt = cfg & 1;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
- struct pnx4008_dma_ch_ctrl * ctrl)
-{
- int new_len = ctrl->tr_size, num_entries = 0;
- int old_len = new_len;
- int src_width, dest_width, count = 1;
-
- switch (ctrl->swidth) {
- case WIDTH_BYTE:
- src_width = 1;
- break;
- case WIDTH_HWORD:
- src_width = 2;
- break;
- case WIDTH_WORD:
- src_width = 4;
- break;
- default:
- return;
- }
-
- switch (ctrl->dwidth) {
- case WIDTH_BYTE:
- dest_width = 1;
- break;
- case WIDTH_HWORD:
- dest_width = 2;
- break;
- case WIDTH_WORD:
- dest_width = 4;
- break;
- default:
- return;
- }
-
- while (new_len > 0x7FF) {
- num_entries++;
- new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
- }
- if (num_entries != 0) {
- struct pnx4008_dma_ll *ll = NULL;
- config->ch_ctrl &= ~0x7ff;
- config->ch_ctrl |= new_len;
- if (!config->is_ll) {
- config->is_ll = 1;
- while (num_entries) {
- if (!ll) {
- config->ll =
- pnx4008_alloc_ll_entry(&config->
- ll_dma);
- ll = config->ll;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- config->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = config->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- config->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = config->dest_addr;
- ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- } else {
- struct pnx4008_dma_ll *ll_old = config->ll;
- unsigned long ll_dma_old = config->ll_dma;
- while (num_entries) {
- if (!ll) {
- config->ll =
- pnx4008_alloc_ll_entry(&config->
- ll_dma);
- ll = config->ll;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- config->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = config->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- config->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = config->dest_addr;
- ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- ll->next_dma = ll_dma_old;
- ll->next = ll_old;
- }
- /* adjust last length/tc */
- ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
- ll->ch_ctrl |= old_len - new_len * (count - 1);
- config->ch_ctrl &= 0x7fffffff;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
- struct pnx4008_dma_ch_ctrl * ctrl)
-{
- int new_len = ctrl->tr_size, num_entries = 0;
- int old_len = new_len;
- int src_width, dest_width, count = 1;
-
- switch (ctrl->swidth) {
- case WIDTH_BYTE:
- src_width = 1;
- break;
- case WIDTH_HWORD:
- src_width = 2;
- break;
- case WIDTH_WORD:
- src_width = 4;
- break;
- default:
- return;
- }
-
- switch (ctrl->dwidth) {
- case WIDTH_BYTE:
- dest_width = 1;
- break;
- case WIDTH_HWORD:
- dest_width = 2;
- break;
- case WIDTH_WORD:
- dest_width = 4;
- break;
- default:
- return;
- }
-
- while (new_len > 0x7FF) {
- num_entries++;
- new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
- }
- if (num_entries != 0) {
- struct pnx4008_dma_ll *ll = NULL;
- cur_ll->ch_ctrl &= ~0x7ff;
- cur_ll->ch_ctrl |= new_len;
- if (!cur_ll->next) {
- while (num_entries) {
- if (!ll) {
- cur_ll->next =
- pnx4008_alloc_ll_entry(&cur_ll->
- next_dma);
- ll = cur_ll->next;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- cur_ll->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = cur_ll->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- cur_ll->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = cur_ll->dest_addr;
- ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- } else {
- struct pnx4008_dma_ll *ll_old = cur_ll->next;
- unsigned long ll_dma_old = cur_ll->next_dma;
- while (num_entries) {
- if (!ll) {
- cur_ll->next =
- pnx4008_alloc_ll_entry(&cur_ll->
- next_dma);
- ll = cur_ll->next;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- cur_ll->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = cur_ll->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- cur_ll->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = cur_ll->dest_addr;
- ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
-
- ll->next_dma = ll_dma_old;
- ll->next = ll_old;
- }
- /* adjust last length/tc */
- ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
- ll->ch_ctrl |= old_len - new_len * (count - 1);
- cur_ll->ch_ctrl &= 0x7fffffff;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
- __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
- if (config->is_ll)
- __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
- else
- __raw_writel(0, DMAC_Cx_LLI(ch));
-
- __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
- __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
- return -EINVAL;
-
- pnx4008_dma_lock();
- config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
- config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
- config->is_ll = config->ll_dma ? 1 : 0;
-
- config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
- config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- ch_cfg |= 1;
- __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- ch_cfg &= ~1;
- __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i;
- unsigned long dint = __raw_readl(DMAC_INT_STAT);
- unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
- unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
- unsigned long i_bit;
-
- for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
- i_bit = 1 << i;
- if (dint & i_bit) {
- struct dma_channel *channel = &dma_channels[i];
-
- if (channel->name && channel->irq_handler) {
- int cause = 0;
-
- if (eint & i_bit)
- cause |= DMA_ERR_INT;
- if (tcint & i_bit)
- cause |= DMA_TC_INT;
- channel->irq_handler(i, cause, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- if (tcint & i_bit)
- __raw_writel(i_bit, DMAC_INT_TC_CLEAR);
- if (eint & i_bit)
- __raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
- int ret, i;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- goto out;
- }
-
- ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
- ll_pool.cur = ll_pool.vaddr =
- dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
- &ll_pool.dma_addr, GFP_KERNEL);
-
- if (!ll_pool.vaddr) {
- ret = -ENOMEM;
- free_irq(DMA_INT, NULL);
- goto out;
- }
-
- for (i = 0; i < ll_pool.count - 1; i++) {
- void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
- *addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
- }
- *(long *)(ll_pool.vaddr +
- (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
- (long)ll_pool.vaddr;
-
- __raw_writel(1, DMAC_CONFIG);
-
-out:
- return ret;
-}
-arch_initcall(pnx4008_dma_init);
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE (0x00U)
-#define PIO_OUTP_SET (0x04U)
-#define PIO_OUTP_CLR (0x08U)
-#define PIO_OUTP_STATE (0x0CU)
-#define PIO_DRV_SET (0x10U)
-#define PIO_DRV_CLR (0x14U)
-#define PIO_DRV_STATE (0x18U)
-#define PIO_SDINP_STATE (0x1CU)
-#define PIO_SDOUTP_SET (0x20U)
-#define PIO_SDOUTP_CLR (0x24U)
-#define PIO_MUX_SET (0x28U)
-#define PIO_MUX_CLR (0x2CU)
-#define PIO_MUX_STATE (0x30U)
-
-static inline void gpio_lock(void)
-{
- local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
- local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
- u32 bit, val;
- int ret = -EFAULT;
-
- if (gpio < 0)
- goto out;
-
- bit = GPIO_BIT(gpio);
- if (bit) {
- val = __raw_readl(PIO_VA_BASE + reg);
- ret = (val & bit) ? 1 : 0;
- }
-out:
- return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
- u32 bit, val;
- int ret = -EFAULT;
-
- if (gpio < 0)
- goto out;
-
- bit = GPIO_BIT(gpio);
- if (bit) {
- val = __raw_readl(PIO_VA_BASE + reg);
- val |= bit;
- __raw_writel(val, PIO_VA_BASE + reg);
- ret = 0;
- }
-out:
- return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX 0
-#define OUTP_INDEX 1
-#define GPIO_INDEX 2
-#define MUX_INDEX 3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
- -1, -1, -1, 6, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, 2, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
- unsigned long bit = GPIO_BIT(pin);
- int ret = -EBUSY; /* Already in use */
-
- gpio_lock();
-
- if (GPIO_ISBID(pin)) {
- if (access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] |= bit;
-
- } else if (GPIO_ISRAM(pin)) {
- if (access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] |= bit;
-
- } else if (GPIO_ISMUX(pin)) {
- if (access_map[MUX_INDEX] & bit)
- goto out;
- access_map[MUX_INDEX] |= bit;
-
- } else if (GPIO_ISOUT(pin)) {
- if (access_map[OUTP_INDEX] & bit)
- goto out;
- access_map[OUTP_INDEX] |= bit;
-
- } else if (GPIO_ISIN(pin)) {
- if (access_map[INP_INDEX] & bit)
- goto out;
- access_map[INP_INDEX] |= bit;
- } else
- goto out;
- ret = 0;
-
-out:
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
- unsigned long bit = GPIO_BIT(pin);
- int ret = -EFAULT; /* Not registered */
-
- gpio_lock();
-
- if (GPIO_ISBID(pin)) {
- if (~access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] &= ~bit;
- } else if (GPIO_ISRAM(pin)) {
- if (~access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] &= ~bit;
- } else if (GPIO_ISMUX(pin)) {
- if (~access_map[MUX_INDEX] & bit)
- goto out;
- access_map[MUX_INDEX] &= ~bit;
- } else if (GPIO_ISOUT(pin)) {
- if (~access_map[OUTP_INDEX] & bit)
- goto out;
- access_map[OUTP_INDEX] &= ~bit;
- } else if (GPIO_ISIN(pin)) {
- if (~access_map[INP_INDEX] & bit)
- goto out;
- access_map[INP_INDEX] &= ~bit;
- } else
- goto out;
- ret = 0;
-
-out:
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
- unsigned long ret = -EFAULT;
- int gpio = GPIO_BIT_MASK(pin);
- gpio_lock();
- if (GPIO_ISOUT(pin)) {
- ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
- } else if (GPIO_ISRAM(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
- ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
- }
- } else if (GPIO_ISBID(pin)) {
- ret = gpio_read_bit(PIO_DRV_STATE, gpio);
- if (ret > 0)
- ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
- else if (ret == 0)
- ret =
- gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
- } else if (GPIO_ISIN(pin)) {
- ret = gpio_read_bit(PIO_INP_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISOUT(pin)) {
- printk( "writing '%x' to '%x'\n",
- gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
- ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
- } else if (GPIO_ISRAM(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
- ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
- PIO_SDOUTP_CLR, gpio);
- } else if (GPIO_ISBID(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
- ret = gpio_set_bit(output ? PIO_OUTP_SET :
- PIO_OUTP_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
- ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
- ret = gpio_read_bit(PIO_DRV_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin)) {
- ret =
- gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
- gpio_to_mux_map[gpio]);
- } else if (GPIO_ISOUT(pin)) {
- ret =
- gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
- outp_to_mux_map[gpio]);
- } else if (GPIO_ISMUX(pin)) {
- ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
- } else if (GPIO_ISOUT(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
- } else if (GPIO_ISMUX(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
+++ /dev/null
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@gmail.com>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-static struct resource i2c0_resources[] = {
- {
- .start = PNX4008_I2C1_BASE,
- .end = PNX4008_I2C1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = I2C_1_INT,
- .end = I2C_1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c1_resources[] = {
- {
- .start = PNX4008_I2C2_BASE,
- .end = PNX4008_I2C2_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = I2C_2_INT,
- .end = I2C_2_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c2_resources[] = {
- {
- .start = PNX4008_USB_CONFIG_BASE + 0x300,
- .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = USB_I2C_INT,
- .end = USB_I2C_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c0_device = {
- .name = "pnx-i2c.0",
- .id = 0,
- .resource = i2c0_resources,
- .num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
- .name = "pnx-i2c.1",
- .id = 1,
- .resource = i2c1_resources,
- .num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
- .name = "pnx-i2c.2",
- .id = 2,
- .resource = i2c2_resources,
- .num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
- &i2c0_device,
- &i2c1_device,
- &i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
+++ /dev/null
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x00090000
- add \rv, \rp, #0xf4000000 @ virtual
- add \rp, \rp, #0x40000000 @ physical
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/dma.h
- *
- * PNX4008 DMA header file
- *
- * Author: Vitaly Wool
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS 8
-
-#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT (DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024)
-#define DMAC_CONFIG (DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
- WIDTH_BYTE = 0,
- WIDTH_HWORD,
- WIDTH_WORD
-};
-
-enum {
- FC_MEM2MEM_DMA,
- FC_MEM2PER_DMA,
- FC_PER2MEM_DMA,
- FC_PER2PER_DMA,
- FC_PER2PER_DPER,
- FC_MEM2PER_PER,
- FC_PER2MEM_PER,
- FC_PER2PER_SPER
-};
-
-enum {
- DMA_INT_UNKNOWN = 0,
- DMA_ERR_INT = 1,
- DMA_TC_INT = 2,
-};
-
-enum {
- DMA_BUFFER_ALLOCATED = 1,
- DMA_HAS_LL = 2,
-};
-
-enum {
- PER_CAM_DMA_1 = 0,
- PER_NDF_FLASH = 1,
- PER_MBX_SLAVE_FIFO = 2,
- PER_SPI2_REC_XMIT = 3,
- PER_MS_SD_RX_XMIT = 4,
- PER_HS_UART_1_XMIT = 5,
- PER_HS_UART_1_RX = 6,
- PER_HS_UART_2_XMIT = 7,
- PER_HS_UART_2_RX = 8,
- PER_HS_UART_7_XMIT = 9,
- PER_HS_UART_7_RX = 10,
- PER_SPI1_REC_XMIT = 11,
- PER_MLC_NDF_SREC = 12,
- PER_CAM_DMA_2 = 13,
- PER_PRNG_INFIFO = 14,
- PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
- int tc_mask;
- int cacheable;
- int bufferable;
- int priv_mode;
- int di;
- int si;
- int dest_ahb1;
- int src_ahb1;
- int dwidth;
- int swidth;
- int dbsize;
- int sbsize;
- int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
- int halt;
- int active;
- int lock;
- int itc;
- int ie;
- int flow_cntrl;
- int dest_per;
- int src_per;
-};
-
-struct pnx4008_dma_ll {
- unsigned long src_addr;
- unsigned long dest_addr;
- u32 next_dma;
- unsigned long ch_ctrl;
- struct pnx4008_dma_ll *next;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
- int is_ll;
- unsigned long src_addr;
- unsigned long dest_addr;
- unsigned long ch_ctrl;
- unsigned long ch_cfg;
- struct pnx4008_dma_ll *ll;
- u32 ll_dma;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
- void (*)(int, int, void *),
- void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
- unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
- struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
- unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
- struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
- struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
- struct pnx4008_dma_ch_ctrl *);
-
-#endif /* _ASM_ARCH_DMA_H */
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE 0xF0000000
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK 0x00
-#define INTRC_RAW_STAT 0x04
-#define INTRC_STAT 0x08
-#define INTRC_POLAR 0x0C
-#define INTRC_ACT_TYPE 0x10
-#define INTRC_TYPE 0x14
-
-#define SIC1_BASE_INT 32
-#define SIC2_BASE_INT 64
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
- ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
- ldr \irqstat, [\base, #INTRC_STAT]
-
- cmp \irqstat,#1<<16
- movhs \irqnr,#16
- movlo \irqnr,#0
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
- teq \irqstat,#0
- beq 1003f
-
-/* and now check for extended IRQ reasons */
- cmp \irqnr,#1
- bls 1003f
- cmp \irqnr,#30
- blo 1002f
-
-/* IRQ 31,30 : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- moveq \irqnr,#SIC1_BASE_INT
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- movne \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- and \irqstat,\irqstat,\tmp
- b 1004f
-
-1003:
-/* IRQ 1,0 : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number */
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- movne \irqnr,#SIC1_BASE_INT
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- moveq \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- bic \irqstat,\irqstat,\tmp
-
-1004:
-
- cmp \irqstat,#1<<16
- addhs \irqnr,\irqnr,#16
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
- teq \irqstat,#0
-1003:
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN (0)
-#define GPIO_OUT (0x100)
-#define GPIO_BID (0x200)
-#define GPIO_RAM (0x300)
-#define GPIO_MUX (0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00 (GPIO_IN | 0)
-#define GPI_01 (GPIO_IN | 1)
-#define GPI_02 (GPIO_IN | 2)
-#define GPI_03 (GPIO_IN | 3)
-#define GPI_04 (GPIO_IN | 4)
-#define GPI_05 (GPIO_IN | 5)
-#define GPI_06 (GPIO_IN | 6)
-#define GPI_07 (GPIO_IN | 7)
-#define GPI_08 (GPIO_IN | 8)
-#define GPI_09 (GPIO_IN | 9)
-#define U1_RX (GPIO_IN | 15)
-#define U2_HTCS (GPIO_IN | 16)
-#define U2_RX (GPIO_IN | 17)
-#define U3_RX (GPIO_IN | 18)
-#define U4_RX (GPIO_IN | 19)
-#define U5_RX (GPIO_IN | 20)
-#define U6_IRRX (GPIO_IN | 21)
-#define U7_HCTS (GPIO_IN | 22)
-#define U7_RX (GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN (GPIO_IN | 25)
-#define DISP_SYNC (GPIO_IN | 26)
-#define SPI2_DATIN (GPIO_IN | 27)
-#define GPI_11 (GPIO_IN | 28)
-
-#define GPIO_IN_MASK 0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00 (GPIO_OUT | 0)
-#define GPO_01 (GPIO_OUT | 1)
-#define GPO_02 (GPIO_OUT | 2)
-#define GPO_03 (GPIO_OUT | 3)
-#define GPO_04 (GPIO_OUT | 4)
-#define GPO_05 (GPIO_OUT | 5)
-#define GPO_06 (GPIO_OUT | 6)
-#define GPO_07 (GPIO_OUT | 7)
-#define GPO_08 (GPIO_OUT | 8)
-#define GPO_09 (GPIO_OUT | 9)
-#define GPO_10 (GPIO_OUT | 10)
-#define GPO_11 (GPIO_OUT | 11)
-#define GPO_12 (GPIO_OUT | 12)
-#define GPO_13 (GPIO_OUT | 13)
-#define GPO_14 (GPIO_OUT | 14)
-#define GPO_15 (GPIO_OUT | 15)
-#define GPO_16 (GPIO_OUT | 16)
-#define GPO_17 (GPIO_OUT | 17)
-#define GPO_18 (GPIO_OUT | 18)
-#define GPO_19 (GPIO_OUT | 19)
-#define GPO_20 (GPIO_OUT | 20)
-#define GPO_21 (GPIO_OUT | 21)
-#define GPO_22 (GPIO_OUT | 22)
-#define GPO_23 (GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK 0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19 (GPIO_RAM | 0)
-#define RAM_D20 (GPIO_RAM | 1)
-#define RAM_D21 (GPIO_RAM | 2)
-#define RAM_D22 (GPIO_RAM | 3)
-#define RAM_D23 (GPIO_RAM | 4)
-#define RAM_D24 (GPIO_RAM | 5)
-#define RAM_D25 (GPIO_RAM | 6)
-#define RAM_D26 (GPIO_RAM | 7)
-#define RAM_D27 (GPIO_RAM | 8)
-#define RAM_D28 (GPIO_RAM | 9)
-#define RAM_D29 (GPIO_RAM | 10)
-#define RAM_D30 (GPIO_RAM | 11)
-#define RAM_D31 (GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK 0x1fff
-
-/* I/O pins */
-#define GPIO_00 (GPIO_BID | 25)
-#define GPIO_01 (GPIO_BID | 26)
-#define GPIO_02 (GPIO_BID | 27)
-#define GPIO_03 (GPIO_BID | 28)
-#define GPIO_04 (GPIO_BID | 29)
-#define GPIO_05 (GPIO_BID | 30)
-
-#define GPIO_BID_MASK 0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK 0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-#define SE_USB_OTG_ATX_INT_N 19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT 17
-#define SE_KEY_IRQ 16
-#define SE_DSP_SLAVEPORT_INT 15
-#define SE_DSP_GPIO1_INT 14
-#define SE_DSP_GPIO0_INT 13
-#define SE_DSP_AHB_INT 12
-/*11-6 unused*/
-#define SE_GPIO_05_INT 5
-#define SE_GPIO_04_INT 4
-#define SE_GPIO_03_INT 3
-#define SE_GPIO_02_INT 2
-#define SE_GPIO_01_INT 1
-#define SE_GPIO_00_INT 0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
- __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif /* _PNX4008_GPIO_H_ */
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE 0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS 96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT 64
-
-#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
-#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
-#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
-#define GPI_06_INT 92
-#define GPI_05_INT 91
-#define GPI_04_INT 90
-#define GPI_03_INT 89
-#define GPI_02_INT 88
-#define GPI_01_INT 87
-#define GPI_00_INT 86
-#define BT_CLKREQ_INT 85
-#define SPI1_DATIN_INT 84
-#define U5_RX_INT 83
-#define SDIO_INT_N 82
-#define CAM_HS_INT 81
-#define CAM_VS_INT 80
-#define GPI_07_INT 79
-#define DISP_SYNC_INT 78
-#define DSP_INT8 77
-#define U7_HCTS_INT 76
-#define GPI_10_INT 75
-#define GPI_09_INT 74
-#define GPI_08_INT 73
-#define DSP_INT7 72
-#define U2_HCTS_INT 71
-#define SPI2_DATIN_INT 70
-#define GPIO_05_INT 69
-#define GPIO_04_INT 68
-#define GPIO_03_INT 67
-#define GPIO_02_INT 66
-#define GPIO_01_INT 65
-#define GPIO_00_INT 64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT 32
-
-#define USB_I2C_INT 63
-#define USB_DEV_HP_INT 62
-#define USB_DEV_LP_INT 61
-#define USB_DEV_DMA_INT 60
-#define USB_HOST_INT 59
-#define USB_OTG_ATX_INT_N 58
-#define USB_OTG_TIMER_INT 57
-#define SW_INT 56
-#define SPI1_INT 55
-#define KEY_IRQ 54
-#define DSP_M_INT 53
-#define RTC_INT 52
-#define I2C_1_INT 51
-#define I2C_2_INT 50
-#define PLL1_LOCK_INT 49
-#define PLL2_LOCK_INT 48
-#define PLL3_LOCK_INT 47
-#define PLL4_LOCK_INT 46
-#define PLL5_LOCK_INT 45
-#define SPI2_INT 44
-#define DSP_INT1 43
-#define DSP_INT2 42
-#define DSP_TDM_INT2 41
-#define TS_AUX_INT 40
-#define TS_IRQ 39
-#define TS_P_INT 38
-#define UOUT1_TO_PAD_INT 37
-#define GPI_11_INT 36
-#define DSP_INT4 35
-#define JTAG_COMM_RX_INT 34
-#define JTAG_COMM_TX_INT 33
-#define DSP_INT3 32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT 0
-
-#define SUB2_FIQ_N 31 /*active low */
-#define SUB1_FIQ_N 30 /*active low */
-#define JPEG_INT 29
-#define DMA_INT 28
-#define MSTIMER_INT 27
-#define IIR1_INT 26
-#define IIR2_INT 25
-#define IIR7_INT 24
-#define DSP_TDM_INT0 23
-#define DSP_TDM_INT1 22
-#define DSP_P_INT 21
-#define DSP_INT0 20
-#define DUM_INT 19
-#define UOUT0_TO_PAD_INT 18
-#define MP4_ENC_INT 17
-#define MP4_DEC_INT 16
-#define SD0_INT 15
-#define MBX_INT 14
-#define SD1_INT 13
-#define MS_INT_N 12
-#define FLASH_INT 11 /*NAND*/
-#define IIR6_INT 10
-#define IIR5_INT 9
-#define IIR4_INT 8
-#define IIR3_INT 7
-#define WATCH_INT 6
-#define HSTIMER_INT 5
-#define ARCH_TIMER_IRQ HSTIMER_INT
-#define CAM_INT 4
-#define PRNG_INT 3
-#define CRYPTO_INT 2
-#define SUB2_IRQ_N 1 /*active low */
-#define SUB1_IRQ_N 0 /*active low */
-
-#define PNX4008_IRQ_TYPES \
-{ /*IRQ #'s: */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-
-#endif /* __PNX4008_IRQS_h__ */
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/param.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define HZ 100
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE 0x08000000
-#define PNX4008_IRAM_SIZE 0x00010000
-#define PNX4008_YUV_SLAVE_BASE 0x10000000
-#define PNX4008_DUM_SLAVE_BASE 0x18000000
-#define PNX4008_NDF_FLASH_BASE 0x20020000
-#define PNX4008_SPI1_BASE 0x20088000
-#define PNX4008_SPI2_BASE 0x20090000
-#define PNX4008_SD_CONFIG_BASE 0x20098000
-#define PNX4008_FLASH_DATA 0x200B0000
-#define PNX4008_MLC_FLASH_BASE 0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE 0x300A0000
-#define PNX4008_DMA_CONFIG_BASE 0x31000000
-#define PNX4008_USB_CONFIG_BASE 0x31020000
-#define PNX4008_SDRAM_CFG_BASE 0x31080000
-#define PNX4008_AHB2FAB_BASE 0x40000000
-#define PNX4008_PWRMAN_BASE 0x40004000
-#define PNX4008_INTCTRLMIC_BASE 0x40008000
-#define PNX4008_INTCTRLSIC1_BASE 0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE 0x40010000
-#define PNX4008_HSUART1_BASE 0x40014000
-#define PNX4008_HSUART2_BASE 0x40018000
-#define PNX4008_HSUART7_BASE 0x4001C000
-#define PNX4008_RTC_BASE 0x40024000
-#define PNX4008_PIO_BASE 0x40028000
-#define PNX4008_MSTIMER_BASE 0x40034000
-#define PNX4008_HSTIMER_BASE 0x40038000
-#define PNX4008_WDOG_BASE 0x4003C000
-#define PNX4008_DEBUG_BASE 0x40040000
-#define PNX4008_TOUCH1_BASE 0x40048000
-#define PNX4008_KEYSCAN_BASE 0x40050000
-#define PNX4008_UARTCTRL_BASE 0x40054000
-#define PNX4008_PWM_BASE 0x4005C000
-#define PNX4008_UART3_BASE 0x40080000
-#define PNX4008_UART4_BASE 0x40088000
-#define PNX4008_UART5_BASE 0x40090000
-#define PNX4008_UART6_BASE 0x40098000
-#define PNX4008_I2C1_BASE 0x400A0000
-#define PNX4008_I2C2_BASE 0x400A8000
-#define PNX4008_MAGICGATE_BASE 0x400B0000
-#define PNX4008_DUMCONF_BASE 0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE 0x400BC000
-#define PNX4008_DSP_BASE 0x400C0000
-#define PNX4008_PROFCOUNTER_BASE 0x400C8000
-#define PNX4008_CRYPTO_BASE 0x400D0000
-#define PNX4008_CAMIFCONF_BASE 0x400D8000
-#define PNX4008_YUV2RGB_BASE 0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE 0x400E8000
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_PNX4008_PM_H */
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
- while (UART5_FR & (1 << 5))
- barrier();
-
- UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq)); /* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */
- __raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq)); /* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */
- irq_set_handler(d->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_EDGE_FALLING:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */
- irq_set_handler(d->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */
- irq_set_handler(d->irq, handle_level_irq);
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */
- irq_set_handler(d->irq, handle_level_irq);
- break;
-
- /* IRQ_TYPE_EDGE_BOTH is not supported */
- default:
- printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
- return -1;
- }
- return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
- .irq_ack = pnx4008_mask_ack_irq,
- .irq_mask = pnx4008_mask_irq,
- .irq_unmask = pnx4008_unmask_irq,
- .irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
- unsigned int i;
-
- /* configure IRQ's */
- for (i = 0; i < NR_IRQS; i++) {
- set_irq_flags(i, IRQF_VALID);
- irq_set_chip(i, &pnx4008_irq_chip);
- pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
- }
-
- /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
- pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
- pnx4008_irq_type[SUB1_IRQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
- pnx4008_irq_type[SUB2_IRQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
- pnx4008_irq_type[SUB1_FIQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
- pnx4008_irq_type[SUB2_FIQ_N]);
-
- /* mask all others */
- __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
- (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
- INTC_ER(MAIN_BASE_INT));
- __raw_writel(0, INTC_ER(SIC1_BASE_INT));
- __raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
- void (*pnx4008_cpu_standby_ptr) (void);
-
- local_irq_disable();
- local_fiq_disable();
-
- clk_disable(pll4_clk);
-
- /*saving portion of SRAM to be used by suspend function. */
- memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
- /*make sure SRAM copy gets physically written into SDRAM.
- SDRAM will be placed into self-refresh during power down */
- flush_cache_all();
-
- /*copy suspend function into SRAM */
- memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
- /*do suspend */
- pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
- pnx4008_cpu_standby_ptr();
-
- /*restoring portion of SRAM that was used by suspend function */
- memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
- clk_enable(pll4_clk);
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
- void (*pnx4008_cpu_suspend_ptr) (void);
-
- local_irq_disable();
- local_fiq_disable();
-
- clk_disable(pll4_clk);
-
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
- /*saving portion of SRAM to be used by suspend function. */
- memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
- /*make sure SRAM copy gets physically written into SDRAM.
- SDRAM will be placed into self-refresh during power down */
- flush_cache_all();
-
- /*copy suspend function into SRAM */
- memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
- /*do suspend */
- pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
- pnx4008_cpu_suspend_ptr();
-
- /*restoring portion of SRAM that was used by suspend function */
- memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
- clk_enable(pll4_clk);
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- pnx4008_standby();
- break;
- case PM_SUSPEND_MEM:
- pnx4008_suspend();
- break;
- }
- return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
- return (state == PM_SUSPEND_STANDBY) ||
- (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
- .enter = pnx4008_pm_enter,
- .valid = pnx4008_pm_valid,
-};
-
-int __init pnx4008_pm_init(void)
-{
- u32 sram_size_to_allocate;
-
- pll4_clk = clk_get(0, "ck_pll4");
- if (IS_ERR(pll4_clk)) {
- printk(KERN_ERR
- "PM Suspend cannot acquire ARM(PLL4) clock control\n");
- return PTR_ERR(pll4_clk);
- }
-
- if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
- sram_size_to_allocate = pnx4008_cpu_standby_sz;
- else
- sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
- saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
- if (!saved_sram) {
- printk(KERN_ERR
- "PM Suspend: cannot allocate memory to save portion of SRAM\n");
- clk_put(pll4_clk);
- return -ENOMEM;
- }
-
- suspend_set_ops(&pnx4008_pm_ops);
- return 0;
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-pnx4008/serial.c
- *
- * PNX4008 UART initialization
- *
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3 0
-#define UART_4 1
-#define UART_5 2
-#define UART_6 3
-#define UART_UNKNOWN (-1)
-
-#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET 8
-#define UART_FIFO_SIZE 64
-
-void pnx4008_uart_init(void)
-{
- u32 tmp;
- int i = UART_FIFO_SIZE;
-
- __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
- __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
- /* Send a NULL to fix the UART HW bug */
- __raw_writel(0x00, UART5_BASE_VA);
- __raw_writel(0x00, UART3_BASE_VA);
-
- while (i--) {
- tmp = __raw_readl(UART5_BASE_VA);
- tmp = __raw_readl(UART3_BASE_VA);
- }
- __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
- __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
- /* setup wakeup interrupt */
- start_int_set_rising_edge(SE_U3_RX_INT);
- start_int_ack(SE_U3_RX_INT);
- start_int_umask(SE_U3_RX_INT);
-
- start_int_set_rising_edge(SE_U5_RX_INT);
- start_int_ack(SE_U5_RX_INT);
- start_int_umask(SE_U5_RX_INT);
-}
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
- .text
-
-ENTRY(pnx4008_cpu_suspend)
- @this function should be entered in Direct run mode.
-
- @ save registers on stack
- stmfd sp!, {r0 - r6, lr}
-
- @ setup Power Manager base address in r4
- @ and put it's value in r5
- mov r4, #(PWRMAN_VA_BASE & 0xff000000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
- ldr r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ setup SDRAM controller base address in r2
- @ and put it's value in r3
- mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
- ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do save current bit settings in r1
- mov r1, r5
-
- @ set SDRAM self-refresh bit
- orr r5, r5, #(1 << 9)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get into self-refresh mode
-2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #(1 << 2)
- beq 2b
-
- @ to prepare SDRAM to get out of self-refresh mode after wakeup
- orr r5, r5, #(1 << 7)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do enter stop mode
- orr r5, r5, #(1 << 0)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- @ sleeping now...
-
- @ coming out of STOP mode into Direct Run mode
- @ clear STOP mode and SDRAM self-refresh bits
- str r1, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get out self-refresh mode
-3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #5
- bne 3b
-
- @ restore regs and return
- ldmfd sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
- .word . - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
- @ save registers on stack
- stmfd sp!, {r0 - r6, lr}
-
- @ setup Power Manager base address in r4
- @ and put it's value in r5
- mov r4, #(PWRMAN_VA_BASE & 0xff000000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
- ldr r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ setup SDRAM controller base address in r2
- @ and put it's value in r3
- mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
- ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do save current bit settings in r1
- mov r1, r5
-
- @ set SDRAM self-refresh bit
- orr r5, r5, #(1 << 9)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get into self-refresh mode
-2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #(1 << 2)
- beq 2b
-
- @ set 'get out of self-refresh mode after wakeup' bit
- orr r5, r5, #(1 << 7)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now...
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get out self-refresh mode
-3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #5
- bne 3b
-
- @ restore regs and return
- ldmfd sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
- .word . - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
- stmfd sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
-#else
-1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
- bne 1b
-#endif
- ldmfd sp!, {r0 - r6, pc}
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
- u32 ticks_to_match =
- __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
- u32 elapsed = LATCH - ticks_to_match;
- return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
- if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
- do {
- timer_tick();
-
- /*
- * this algorithm takes care of possible delay
- * for this interrupt handling longer than a normal
- * timer period
- */
- __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
- HSTIM_MATCH0);
- __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */
-
- /*
- * The goal is to keep incrementing HSTIM_MATCH0
- * register until HSTIM_MATCH0 indicates time after
- * what HSTIM_COUNTER indicates.
- */
- } while ((signed)
- (__raw_readl(HSTIM_MATCH0) -
- __raw_readl(HSTIM_COUNTER)) < 0);
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
- .name = "PNX4008 Tick Timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
- __raw_writel(RESET_COUNT, MSTIM_CTRL);
- while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
- __raw_writel(0, MSTIM_CTRL); /* stop the timer */
- __raw_writel(0, MSTIM_MCTRL);
-
- __raw_writel(RESET_COUNT, HSTIM_CTRL);
- while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
- __raw_writel(0, HSTIM_CTRL);
- __raw_writel(0, HSTIM_MCTRL);
- __raw_writel(0, HSTIM_CCR);
- __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */
- __raw_writel(LATCH, HSTIM_MATCH0);
- __raw_writel(MR0_INT, HSTIM_MCTRL);
-
- setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
- __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN 1
-#define TIMER_CLK_EN 2 /* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
- timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
- __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
- __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
- .init = pnx4008_setup_timer,
- .offset = pnx4008_gettimeoffset,
- .suspend = pnx4008_timer_suspend,
- .resume = pnx4008_timer_resume,
-};
-
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x) (x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT 1
-#define RESET_COUNT0 (1<<1)
-#define STOP_COUNT0 (1<<2)
-#define MR1_INT (1<<3)
-#define RESET_COUNT1 (1<<4)
-#define STOP_COUNT1 (1<<5)
-#define MR2_INT (1<<6)
-#define RESET_COUNT2 (1<<7)
-#define STOP_COUNT2 (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB 1
-#define RESET_COUNT (1<<1)
-#define DEBUG_EN (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT 1
-#define MATCH1_INT (1<<1)
-#define MATCH2_INT (1<<2)
-#define RTC_TICK0 (1<<4)
-#define RTC_TICK1 (1<<5)
-
-#endif
--- /dev/null
+if ARCH_SIRF
+
+menu "CSR SiRF primaII/Marco/Polo Specific Features"
+
+config ARCH_PRIMA2
+ bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
+ default y
+ select CPU_V7
+ select ZONE_DMA
+ select SIRF_IRQ
+ help
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
+
+endmenu
+
+config SIRF_IRQ
+ bool
+
+endif
obj-y := timer.o
-obj-y += irq.o
-obj-y += clock.o
obj-y += rstc.o
-obj-y += prima2.o
+obj-y += common.o
obj-y += rtciobrg.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_SIRF_IRQ) += irq.o
+++ /dev/null
-/*
- * Clock tree for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-
-#define SIRFSOC_CLKC_CLK_EN0 0x0000
-#define SIRFSOC_CLKC_CLK_EN1 0x0004
-#define SIRFSOC_CLKC_REF_CFG 0x0014
-#define SIRFSOC_CLKC_CPU_CFG 0x0018
-#define SIRFSOC_CLKC_MEM_CFG 0x001c
-#define SIRFSOC_CLKC_SYS_CFG 0x0020
-#define SIRFSOC_CLKC_IO_CFG 0x0024
-#define SIRFSOC_CLKC_DSP_CFG 0x0028
-#define SIRFSOC_CLKC_GFX_CFG 0x002c
-#define SIRFSOC_CLKC_MM_CFG 0x0030
-#define SIRFSOC_LKC_LCD_CFG 0x0034
-#define SIRFSOC_CLKC_MMC_CFG 0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
-
-#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000)
-
-#define KHZ 1000
-#define MHZ (KHZ * KHZ)
-
-struct clk_ops {
- unsigned long (*get_rate)(struct clk *clk);
- long (*round_rate)(struct clk *clk, unsigned long rate);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*enable)(struct clk *clk);
- int (*disable)(struct clk *clk);
- struct clk *(*get_parent)(struct clk *clk);
- int (*set_parent)(struct clk *clk, struct clk *parent);
-};
-
-struct clk {
- struct clk *parent; /* parent clk */
- unsigned long rate; /* clock rate in Hz */
- signed char usage; /* clock enable count */
- signed char enable_bit; /* enable bit: 0 ~ 63 */
- unsigned short regofs; /* register offset */
- struct clk_ops *ops; /* clock operation */
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static inline unsigned long clkc_readl(unsigned reg)
-{
- return readl(SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-static inline void clkc_writel(u32 val, unsigned reg)
-{
- writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-/*
- * osc_rtc - real time oscillator - 32.768KHz
- * osc_sys - high speed oscillator - 26MHz
- */
-
-static struct clk clk_rtc = {
- .rate = 32768,
-};
-
-static struct clk clk_osc = {
- .rate = 26 * MHZ,
-};
-
-/*
- * std pll
- */
-static unsigned long std_pll_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
- SIRFSOC_CLKC_PLL1_CFG0;
-
- if (clkc_readl(regcfg2) & BIT(2)) {
- /* pll bypass mode */
- clk->rate = fin;
- } else {
- /* fout = fin * nf / nr / od */
- u32 cfg0 = clkc_readl(clk->regofs);
- u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
- u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
- u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
- WARN_ON(fin % MHZ);
- clk->rate = fin / MHZ * nf / nr / od * MHZ;
- }
-
- return clk->rate;
-}
-
-static int std_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin, nf, nr, od, reg;
-
- /*
- * fout = fin * nf / (nr * od);
- * set od = 1, nr = fin/MHz, so fout = nf * MHz
- */
-
- nf = rate / MHZ;
- if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
- return -EINVAL;
-
- fin = clk_get_rate(clk->parent);
- BUG_ON(fin < MHZ);
-
- nr = fin / MHZ;
- BUG_ON((fin % MHZ) || nr > BIT(6));
-
- od = 1;
-
- reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
- clkc_writel(reg, clk->regofs);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
- clkc_writel((nf >> 1) - 1, reg);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
- while (!(clkc_readl(reg) & BIT(6)))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
- return 0;
-}
-
-static struct clk_ops std_pll_ops = {
- .get_rate = std_pll_get_rate,
- .set_rate = std_pll_set_rate,
-};
-
-static struct clk clk_pll1 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL1_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll2 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL2_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll3 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL3_CFG0,
- .ops = &std_pll_ops,
-};
-
-/*
- * clock domains - cpu, mem, sys/io
- */
-
-static struct clk clk_mem;
-
-static struct clk *dmn_get_parent(struct clk *clk)
-{
- struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- WARN_ON((cfg & (BIT(3) - 1)) > 4);
- return clks[cfg & (BIT(3) - 1)];
-}
-
-static int dmn_set_parent(struct clk *clk, struct clk *parent)
-{
- const struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- int i;
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (clks[i] == parent) {
- cfg &= ~(BIT(3) - 1);
- clkc_writel(cfg | i, clk->regofs);
- /* BIT(3) - switching status: 1 - busy, 0 - done */
- while (clkc_readl(clk->regofs) & BIT(3))
- cpu_relax();
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static unsigned long dmn_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 cfg = clkc_readl(clk->regofs);
- if (cfg & BIT(24)) {
- /* fcd bypass mode */
- clk->rate = fin;
- } else {
- /*
- * wait count: bit[19:16], hold count: bit[23:20]
- */
- u32 wait = (cfg >> 16) & (BIT(4) - 1);
- u32 hold = (cfg >> 20) & (BIT(4) - 1);
-
- clk->rate = fin / (wait + hold + 2);
- }
-
- return clk->rate;
-}
-
-static int dmn_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin;
- unsigned ratio, wait, hold, reg;
- unsigned bits = (clk == &clk_mem) ? 3 : 4;
-
- fin = clk_get_rate(clk->parent);
- ratio = fin / rate;
-
- if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
- return -EINVAL;
-
- WARN_ON(fin % rate);
-
- wait = (ratio >> 1) - 1;
- hold = ratio - wait - 2;
-
- reg = clkc_readl(clk->regofs);
- reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
- reg |= (wait << 16) | (hold << 20) | BIT(25);
- clkc_writel(reg, clk->regofs);
-
- /* waiting FCD been effective */
- while (clkc_readl(clk->regofs) & BIT(25))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return 0;
-}
-
-/*
- * cpu clock has no FCD register in Prima2, can only change pll
- */
-static int cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret1, ret2;
- struct clk *cur_parent, *tmp_parent;
-
- cur_parent = dmn_get_parent(clk);
- BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
-
- /* switch to tmp pll before setting parent clock's rate */
- tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
- ret1 = dmn_set_parent(clk, tmp_parent);
- BUG_ON(ret1);
-
- ret2 = clk_set_rate(cur_parent, rate);
-
- ret1 = dmn_set_parent(clk, cur_parent);
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return ret2 ? ret2 : ret1;
-}
-
-static struct clk_ops cpu_ops = {
- .get_parent = dmn_get_parent,
- .set_parent = dmn_set_parent,
- .set_rate = cpu_set_rate,
-};
-
-static struct clk clk_cpu = {
- .parent = &clk_pll1,
- .regofs = SIRFSOC_CLKC_CPU_CFG,
- .ops = &cpu_ops,
-};
-
-
-static struct clk_ops msi_ops = {
- .set_rate = dmn_set_rate,
- .get_rate = dmn_get_rate,
- .set_parent = dmn_set_parent,
- .get_parent = dmn_get_parent,
-};
-
-static struct clk clk_mem = {
- .parent = &clk_pll2,
- .regofs = SIRFSOC_CLKC_MEM_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_sys = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_SYS_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_io = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_IO_CFG,
- .ops = &msi_ops,
-};
-
-/*
- * on-chip clock sets
- */
-static struct clk_lookup onchip_clks[] = {
- {
- .dev_id = "rtc",
- .clk = &clk_rtc,
- }, {
- .dev_id = "osc",
- .clk = &clk_osc,
- }, {
- .dev_id = "pll1",
- .clk = &clk_pll1,
- }, {
- .dev_id = "pll2",
- .clk = &clk_pll2,
- }, {
- .dev_id = "pll3",
- .clk = &clk_pll3,
- }, {
- .dev_id = "cpu",
- .clk = &clk_cpu,
- }, {
- .dev_id = "mem",
- .clk = &clk_mem,
- }, {
- .dev_id = "sys",
- .clk = &clk_sys,
- }, {
- .dev_id = "io",
- .clk = &clk_io,
- },
-};
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (clk->parent)
- clk_enable(clk->parent);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (!clk->usage++ && clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return;
-
- WARN_ON(!clk->usage);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->usage == 0 && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- if (clk->parent)
- clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->rate)
- return clk->rate;
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->ops && clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_rate)
- return -EINVAL;
-
- return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret;
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_parent)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->ops->set_parent(clk, parent);
- if (!ret) {
- parent->usage += clk->usage;
- clk->parent->usage -= clk->usage;
- BUG_ON(clk->parent->usage < 0);
- clk->parent = parent;
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return NULL;
-
- if (!clk->ops || !clk->ops->get_parent)
- return clk->parent;
-
- spin_lock_irqsave(&clocks_lock, flags);
- clk->parent = clk->ops->get_parent(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static void __init sirfsoc_clk_init(void)
-{
- clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
-}
-
-static struct of_device_id clkc_ids[] = {
- { .compatible = "sirf,prima2-clkc" },
- {},
-};
-
-void __init sirfsoc_of_clk_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct map_desc sirfsoc_clkc_iodesc = {
- .virtual = SIRFSOC_CLOCK_VA_BASE,
- .type = MT_DEVICE,
- };
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- panic("unable to find compatible clkc node in dtb\n");
-
- if (of_address_to_resource(np, 0, &res))
- panic("unable to find clkc range in dtb");
- of_node_put(np);
-
- sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
- sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
-
- iotable_init(&sirfsoc_clkc_iodesc, 1);
-
- sirfsoc_clk_init();
-}
--- /dev/null
+/*
+ * Defines machines for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/sizes.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include "common.h"
+
+static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+void __init sirfsoc_mach_init(void)
+{
+ of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
+}
+
+void __init sirfsoc_init_late(void)
+{
+ sirfsoc_pm_init();
+}
+
+#ifdef CONFIG_ARCH_PRIMA2
+static const char *prima2_dt_match[] __initdata = {
+ "sirf,prima2",
+ NULL
+};
+
+DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
+ /* Maintainer: Barry Song <baohua.song@csr.com> */
+ .map_io = sirfsoc_map_lluart,
+ .init_irq = sirfsoc_of_irq_init,
+ .timer = &sirfsoc_timer,
+ .dma_zone_size = SZ_256M,
+ .init_machine = sirfsoc_mach_init,
+ .init_late = sirfsoc_init_late,
+ .dt_compat = prima2_dt_match,
+ .restart = sirfsoc_restart,
+MACHINE_END
+#endif
* during kernel decompression, all mappings are flat:
* virt_addr == phys_addr
*/
- while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
+ while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
& SIRFSOC_UART1_TXFIFO_FULL)
barrier();
- __raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
+ __raw_writel(c, (void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
}
static inline void flush(void)
np = of_find_matching_node(NULL, intc_ids);
if (!np)
- panic("unable to find compatible intc node in dtb\n");
+ return;
sirfsoc_intc_base = of_iomap(np, 0);
if (!sirfsoc_intc_base)
+++ /dev/null
-/*
- * Defines machines for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include "common.h"
-
-static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
- { .compatible = "simple-bus", },
- {},
-};
-
-void __init sirfsoc_mach_init(void)
-{
- of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
-}
-
-void __init sirfsoc_init_late(void)
-{
- sirfsoc_pm_init();
-}
-
-static const char *prima2cb_dt_match[] __initdata = {
- "sirf,prima2-cb",
- NULL
-};
-
-MACHINE_START(PRIMA2_EVB, "prima2cb")
- /* Maintainer: Barry Song <baohua.song@csr.com> */
- .atag_offset = 0x100,
- .init_early = sirfsoc_of_clk_init,
- .map_io = sirfsoc_map_lluart,
- .init_irq = sirfsoc_of_irq_init,
- .timer = &sirfsoc_timer,
- .dma_zone_size = SZ_256M,
- .init_machine = sirfsoc_mach_init,
- .init_late = sirfsoc_init_late,
- .dt_compat = prima2cb_dt_match,
- .restart = sirfsoc_restart,
-MACHINE_END
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
+#include "common.h"
+
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
static void __init sirfsoc_timer_init(void)
{
unsigned long rate;
+ struct clk *clk;
+
+ /* initialize clocking early, we want to set the OS timer */
+ sirfsoc_of_clk_init();
/* timer's input clock is io clock */
- struct clk *clk = clk_get_sys("io", NULL);
+ clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_PXA3XX_DT
+ bool "Support PXA3xx platforms from device tree"
+ select PXA3xx
+ select CPU_PXA300
+ select POWER_SUPPLY
+ select HAVE_PWM
+ select USE_OF
+ help
+ Include support for Marvell PXA3xx based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA3XX_DT is enabled.
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
# NOTE: keep the order of boards in accordance to their order in Kconfig
+# Device Tree support
+obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
+
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/balloon3.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
#include "devices.h"
if (clk->cken < 32)
CKENA |= mask;
- else
+ else if (clk->cken < 64)
CKENB |= mask;
+ else
+ CKENC |= mask;
}
void clk_pxa3xx_cken_disable(struct clk *clk)
if (clk->cken < 32)
CKENA &= ~mask;
- else
+ else if (clk->cken < 64)
CKENB &= ~mask;
+ else
+ CKENC &= ~mask;
}
const struct clkops clk_pxa3xx_cken_ops = {
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include "generic.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa300.h>
#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/audio.h>
#include "generic.h"
#include <mach/pxa320.h>
#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/i2c/pxa-i2c.h>
-#include <asm/pmu.h>
#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
struct platform_device pxa_device_pmu = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.resource = &pxa_resource_pmu,
.num_resources = 1,
};
static u64 pxaficp_dmamask = ~(u32)0;
+static struct resource pxa_ir_resources[] = {
+ [0] = {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_ICP,
+ .end = IRQ_ICP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
struct platform_device pxa_device_ficp = {
.name = "pxa2xx-ir",
.id = -1,
+ .num_resources = ARRAY_SIZE(pxa_ir_resources),
+ .resource = pxa_ir_resources,
.dev = {
.dma_mask = &pxaficp_dmamask,
.coherent_dma_mask = 0xffffffff,
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/eseries-gpio.h>
#include <mach/eseries-irq.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/flash.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
#include <mach/pxa27x.h>
#include <mach/hx4700.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/bitfield.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include "devices.h"
+++ /dev/null
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
- int cd_gpio;
- int rdy_gpio;
- int pwr_gpio;
- void (*reset)(int state);
-};
-
-#endif
+++ /dev/null
-/*
- camera.h - PXA camera driver header file
-
- Copyright (C) 2003, Intel Corporation
- Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER 1
-#define PXA_CAMERA_DATAWIDTH_4 2
-#define PXA_CAMERA_DATAWIDTH_5 4
-#define PXA_CAMERA_DATAWIDTH_8 8
-#define PXA_CAMERA_DATAWIDTH_9 0x10
-#define PXA_CAMERA_DATAWIDTH_10 0x20
-#define PXA_CAMERA_PCLK_EN 0x40
-#define PXA_CAMERA_MCLK_EN 0x80
-#define PXA_CAMERA_PCP 0x100
-#define PXA_CAMERA_HSP 0x200
-#define PXA_CAMERA_VSP 0x400
-
-struct pxacamera_platform_data {
- unsigned long flags;
- unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
+++ /dev/null
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF 1
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-
-struct pxaficp_platform_data {
- int transceiver_cap;
- void (*transceiver_mode)(struct device *dev, int mode);
- int (*startup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
- bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
- unsigned int ocr_mask; /* available voltages */
- unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
- int (*init)(struct device *, irq_handler_t , void *);
- int (*get_ro)(struct device *);
- void (*setpower)(struct device *, unsigned int);
- void (*exit)(struct device *, void *);
- int gpio_card_detect; /* gpio detecting card insertion */
- int gpio_card_ro; /* gpio detecting read only toggle */
- bool gpio_card_ro_invert; /* gpio ro is inverted */
- int gpio_power; /* gpio powering up MMC bus */
- bool gpio_power_invert; /* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-
- unsigned long flags;
-#define ENABLE_PORT1 (1 << 0)
-#define ENABLE_PORT2 (1 << 1)
-#define ENABLE_PORT3 (1 << 2)
-#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW (1 << 3)
-#define POWER_CONTROL_LOW (1 << 4)
-#define NO_OC_PROTECTION (1 << 5)
-#define OC_MODE_GLOBAL (0 << 6)
-#define OC_MODE_PERPORT (1 << 6)
-
- int power_on_delay; /* Power On to Power Good time - in ms
- * HCD must wait for this duration before
- * accessing a powered on port
- */
- int port_mode;
-#define PMM_NPS_MODE 1
-#define PMM_GLOBAL_MODE 2
-#define PMM_PERPORT_MODE 3
-
- int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
+++ /dev/null
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
- int jack_gpio;
-};
-
-#endif
+++ /dev/null
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_PATA_PXA_H__
-#define __MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
- /* PXA DMA DREQ<0:2> pin */
- uint32_t dma_dreq;
- /* Register shift */
- uint32_t reg_shift;
- /* IRQ flags */
- uint32_t irq_flags;
-};
-
-#endif /* __MACH_PATA_PXA_H__ */
#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define CKENC __REG(0x41340024) /* C Clock Enable Register */
#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
+++ /dev/null
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN (1 << 0)
-#define ULPI_SER_3PIN (1 << 1)
- unsigned int ulpi_mode;
-
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
- int up_key;
- int down_key;
- int rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
- int x_filter;
- int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
+++ /dev/null
-/*
- * arch/arm/mach-pxa/include/mach/pxafb.h
- *
- * Support for the xscale frame buffer.
- *
- * Author: Jean-Frederic Clere
- * Created: Sep 22, 2003
- * Copyright: jfclere@sinix.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- * STN - for passive matrix
- * DSTN - for dual scan passive matrix
- * TFT - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit 18 : for output enable polarity
- * bit 19 : for pixel clock edge
- * bit 20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK 0xf
-#define LCD_TYPE_UNKNOWN 0
-#define LCD_TYPE_MONO_STN 1
-#define LCD_TYPE_MONO_DSTN 2
-#define LCD_TYPE_COLOR_STN 3
-#define LCD_TYPE_COLOR_DSTN 4
-#define LCD_TYPE_COLOR_TFT 5
-#define LCD_TYPE_SMART_PANEL 6
-#define LCD_TYPE_MAX 7
-
-#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
-#define LCD_BIAS_ACTIVE_LOW (1 << 18)
-#define LCD_PCLK_EDGE_RISE (0 << 19)
-#define LCD_PCLK_EDGE_FALL (1 << 19)
-#define LCD_ALTERNATE_MAPPING (1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_char bpp;
- u_int cmap_greyscale:1,
- depth:8,
- transparency:1,
- unused:22;
-
- /* Parallel Mode Timing */
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
-
- /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
- * Note:
- * 1. all parameters in nanosecond (ns)
- * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
- * in pxa27x and pxa3xx, initialize them to the same value or
- * the larger one will be used
- * 3. same to {rd,wr}_pulse_width
- *
- * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
- * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
- * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
- */
- unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
- unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
- unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
- unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
- unsigned cmd_inh_time; /* Command Inhibit time between two writes */
- unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
- struct pxafb_mode_info *modes;
- unsigned int num_modes;
-
- unsigned int lcd_conn;
- unsigned long video_mem_size;
-
- u_int fixed_modes:1,
- cmap_inverse:1,
- cmap_static:1,
- acceleration_enabled:1,
- unused:28;
-
- /* The following should be defined in LCCR0
- * LCCR0_Act or LCCR0_Pas Active or Passive
- * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
- * LCCR0_Mono or LCCR0_Color Mono/Color
- * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
- * LCCR0_DMADel(Tcpu) (optional) DMA request delay
- *
- * The following should not be defined in LCCR0:
- * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
- * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
- */
- u_int lccr0;
- /* The following should be defined in LCCR3
- * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
- * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
- * LCCR3_Acb(X) AB Bias pin frequency
- * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
- *
- * The following should not be defined in LCCR3
- * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
- */
- u_int lccr3;
- /* The following should be defined in LCCR4
- * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
- *
- * All other bits in LCCR4 should be left alone.
- */
- u_int lccr4;
- void (*pxafb_backlight_power)(int);
- void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
- void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
- uint16_t *cmds, int n)
-{
- return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-#endif
#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/exception.h>
#include "generic.h"
-#define IRQ_BASE io_p2v(0x40d00000)
-
#define ICIP (0x000)
#define ICMR (0x004)
#define ICLR (0x008)
* This is for peripheral IRQs internal to the PXA chip.
*/
+static void __iomem *pxa_irq_base;
static int pxa_internal_irq_nr;
-
-static inline int cpu_has_ipr(void)
-{
- return !cpu_is_pxa25x();
-}
+static bool cpu_has_ipr;
static inline void __iomem *irq_base(int i)
{
- static unsigned long phys_base[] = {
- 0x40d00000,
- 0x40d0009c,
- 0x40d00130,
+ static unsigned long phys_base_offset[] = {
+ 0x0,
+ 0x9c,
+ 0x130,
};
- return io_p2v(phys_base[i]);
+ return pxa_irq_base + phys_base_offset[i];
}
void pxa_mask_irq(struct irq_data *d)
uint32_t icip, icmr, mask;
do {
- icip = __raw_readl(IRQ_BASE + ICIP);
- icmr = __raw_readl(IRQ_BASE + ICMR);
+ icip = __raw_readl(pxa_irq_base + ICIP);
+ icmr = __raw_readl(pxa_irq_base + ICMR);
mask = icip & icmr;
if (mask == 0)
BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
pxa_internal_irq_nr = irq_nr;
+ cpu_has_ipr = !cpu_is_pxa25x();
+ pxa_irq_base = io_p2v(0x40d00000);
for (n = 0; n < irq_nr; n += 32) {
void __iomem *base = irq_base(n >> 5);
__raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
/* initialize interrupt priority */
- if (cpu_has_ipr())
- __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+ if (cpu_has_ipr)
+ __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i));
irq = PXA_IRQ(i);
irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
__raw_writel(0, base + ICMR);
}
- if (cpu_has_ipr()) {
+ if (cpu_has_ipr) {
for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
+ saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i));
}
return 0;
__raw_writel(0, base + ICLR);
}
- if (cpu_has_ipr())
+ if (cpu_has_ipr)
for (i = 0; i < pxa_internal_irq_nr; i++)
- __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+ __raw_writel(saved_ipr[i], pxa_irq_base + IPR(i));
- __raw_writel(1, IRQ_BASE + ICCR);
+ __raw_writel(1, pxa_irq_base + ICCR);
}
#else
#define pxa_irq_suspend NULL
.suspend = pxa_irq_suspend,
.resume = pxa_irq_resume,
};
+
+#ifdef CONFIG_OF
+static struct irq_domain *pxa_irq_domain;
+
+static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ void __iomem *base = irq_base(hw / 32);
+
+ /* initialize interrupt priority */
+ if (cpu_has_ipr)
+ __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw));
+
+ irq_set_chip_and_handler(hw, &pxa_internal_irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(hw, base);
+ set_irq_flags(hw, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops pxa_irq_ops = {
+ .map = pxa_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static const struct of_device_id intc_ids[] __initconst = {
+ { .compatible = "marvell,pxa-intc", },
+ {}
+};
+
+void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ struct pxa_intc_conf *conf;
+ struct resource res;
+ int n, ret;
+
+ node = of_find_matching_node(NULL, intc_ids);
+ if (!node) {
+ pr_err("Failed to find interrupt controller in arch-pxa\n");
+ return;
+ }
+ of_id = of_match_node(intc_ids, node);
+ conf = of_id->data;
+
+ ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
+ &pxa_internal_irq_nr);
+ if (ret) {
+ pr_err("Not found marvell,intc-nr-irqs property\n");
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("No registers defined for node\n");
+ return;
+ }
+ pxa_irq_base = io_p2v(res.start);
+
+ if (of_find_property(node, "marvell,intc-priority", NULL))
+ cpu_has_ipr = 1;
+
+ ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
+ if (ret < 0) {
+ pr_err("Failed to allocate IRQ numbers\n");
+ return;
+ }
+
+ pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0,
+ &pxa_irq_ops, NULL);
+ if (!pxa_irq_domain)
+ panic("Unable to add PXA IRQ domain\n");
+
+ irq_set_default_host(pxa_irq_domain);
+
+ for (n = 0; n < pxa_internal_irq_nr; n += 32) {
+ void __iomem *base = irq_base(n >> 5);
+
+ __raw_writel(0, base + ICMR); /* disable all IRQs */
+ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
+ }
+
+ /* only unmasked interrupts kick us out of idle */
+ __raw_writel(1, irq_base(0) + ICCR);
+
+ pxa_internal_irq_chip.irq_set_wake = fn;
+}
+#endif /* CONFIG_OF */
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pm.h>
#include <mach/smemc.h>
#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <media/soc_camera.h>
#include <linux/gpio.h>
#include <linux/i2c/pxa-i2c.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa320.h>
#include <mach/mxm8x10.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include <mach/pm.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <media/soc_camera.h>
#include <media/soc_camera.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/pxa-dt.c
+ *
+ * Copyright (C) 2012 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/pxa3xx.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PXA3xx
+extern void __init pxa3xx_dt_init_irq(void);
+
+static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL),
+ OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL),
+ OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL),
+ {}
+};
+
+static void __init pxa3xx_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ pxa3xx_auxdata_lookup, NULL);
+}
+
+static const char *pxa3xx_dt_board_compat[] __initdata = {
+ "marvell,pxa300",
+ "marvell,pxa310",
+ "marvell,pxa320",
+ NULL,
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+ .map_io = pxa3xx_map_io,
+ .init_irq = pxa3xx_dt_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .timer = &pxa_timer,
+ .restart = pxa_restart,
+ .init_machine = pxa3xx_dt_init,
+ .dt_compat = pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
#include <mach/irqs.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
#include <mach/hardware.h>
#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
struct pxa3xx_u2d_ulpi {
struct clk *clk;
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
pxa_ext_wakeup_chip.irq_set_wake = fn;
}
-void __init pxa3xx_init_irq(void)
+static void __init __pxa3xx_init_irq(void)
{
/* enable CP6 access */
u32 value;
value |= (1 << 6);
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
- pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
}
+void __init pxa3xx_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_init_irq(56, pxa3xx_set_wake);
+}
+
+#ifdef CONFIG_OF
+void __init pxa3xx_dt_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_dt_irq_init(pxa3xx_set_wake);
+}
+#endif /* CONFIG_OF */
+
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (!of_have_populated_dt())
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;
#include <asm/mach/arch.h>
#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/flash.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
{
- int ret;
+ int ret, irq;
if (!pdev->dev.platform_data)
return -EINVAL;
gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
+ if (request_irq(irq, sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
+ if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
led_trigger_unregister_simple(sharpsl_charge_led_trigger);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->batfull_irq)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
gpio_free(sharpsl_pm.machinfo->gpio_batlock);
gpio_free(sharpsl_pm.machinfo->gpio_batfull);
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/audio.h>
#include <mach/pxa27x.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/viper.h>
#include <asm/setup.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x.h>
#include <mach/mfp-pxa27x.h>
#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/pm.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/pm.h>
#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/zeus.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
.cd_invert = true,
};
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
- .ref = 24000000,
- .vco_max = ICST307_VCO_MAX,
- .vco_min = ICST307_VCO_MIN,
- .vd_min = 4 + 8,
- .vd_max = 511 + 8,
- .rd_min = 1 + 2,
- .rd_max = 127 + 2,
- .s2div = icst307_s2div,
- .idx2s = icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
- void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, sys_lock);
- writel(val, clk->vcoreg);
- writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
- .ops = &oscvco_clk_ops,
- .params = &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
- .rate = 24000000,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* UART0 */
- .dev_id = "dev:uart0",
- .clk = &ref24_clk,
- }, { /* UART1 */
- .dev_id = "dev:uart1",
- .clk = &ref24_clk,
- }, { /* UART2 */
- .dev_id = "dev:uart2",
- .clk = &ref24_clk,
- }, { /* UART3 */
- .dev_id = "fpga:uart3",
- .clk = &ref24_clk,
- }, { /* UART3 is on the dev chip in PB1176 */
- .dev_id = "dev:uart3",
- .clk = &ref24_clk,
- }, { /* UART4 only exists in PB1176 */
- .dev_id = "fpga:uart4",
- .clk = &ref24_clk,
- }, { /* KMI0 */
- .dev_id = "fpga:kmi0",
- .clk = &ref24_clk,
- }, { /* KMI1 */
- .dev_id = "fpga:kmi1",
- .clk = &ref24_clk,
- }, { /* MMC0 */
- .dev_id = "fpga:mmc0",
- .clk = &ref24_clk,
- }, { /* CLCD is in the PB1176 and EB DevChip */
- .dev_id = "dev:clcd",
- .clk = &oscvco_clk,
- }, { /* PB:CLCD */
- .dev_id = "issp:clcd",
- .clk = &oscvco_clk,
- }, { /* SSP */
- .dev_id = "dev:ssp0",
- .clk = &ref24_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
void __init realview_init_early(void)
{
void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
- if (machine_is_realview_pb1176())
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
- else
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
}
extern void realview_fixup(struct tag *tags, char **from,
struct meminfo *meminfo);
+extern struct smp_operations realview_smp_ops;
+extern void realview_cpu_die(unsigned int cpu);
+
#endif
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref realview_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- const struct icst_params *params;
- void __iomem *vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
+++ /dev/null
-/* empty */
#include <mach/board-pb11mp.h>
#include <mach/board-pbx.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
static void __iomem *scu_base_addr(void)
{
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init realview_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
__raw_writel(virt_to_phys(versatile_secondary_startup),
__io_address(REALVIEW_SYS_FLAGSSET));
}
+
+struct smp_operations realview_smp_ops __initdata = {
+ .smp_init_cpus = realview_smp_init_cpus,
+ .smp_prepare_cpus = realview_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = realview_cpu_die,
+#endif
+};
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/pmu.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
else
timer_irq = IRQ_EB_TIMER0_1;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(timer_irq);
realview_eb_twd_init();
}
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/pmu.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = 1,
.resource = &pmu_resource,
};
timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
realview_timer_init(IRQ_DC1176_TIMER0);
}
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/pmu.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_TC11MP_TIMER0_1);
realview_pb11mp_twd_init();
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/pmu.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = 1,
.resource = &pmu_resource,
};
timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/pmu.h>
#include <asm/smp_twd.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBX_TIMER0_1);
realview_pbx_twd_init();
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
#include <asm/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
.remove = h1940bt_remove,
};
-
-static int __init h1940bt_init(void)
-{
- return platform_driver_register(&h1940bt_driver);
-}
-
-static void __exit h1940bt_exit(void)
-{
- platform_driver_unregister(&h1940bt_driver);
-}
-
-module_init(h1940bt_init);
-module_exit(h1940bt_exit);
+module_platform_driver(h1940bt_driver);
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
-
-struct s3c24xx_led_platdata {
- unsigned int gpio;
- unsigned int flags;
-
- char *name;
- char *def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/gpio-cfg.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
}
}
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include "common.h"
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <linux/mtd/mtd.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
#include <mach/regs-gpio.h>
#include <mach/fb.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <mach/regs-mem.h>
#include <mach/hardware.h>
#include <mach/gta02.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include "common.h"
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
#include <asm/mach/irq.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
static struct map_desc jive_iodesc[] __initdata = {
};
{
printk(KERN_INFO "powering system down...\n");
- s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
- s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPC(5));
}
static void __init jive_machine_init(void)
gpio_request(S3C2410_GPB(7), "jive spi");
gpio_direction_output(S3C2410_GPB(7), 1);
- s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
- s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPB(6));
- s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
- s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPG(8));
/* initialise the WM8750 spi */
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
gpio_free(S3C2410_GPG(4));
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+ gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
- s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
- s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+ gpio_free(S3C2410_GPB(1));
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include "common.h"
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c2410.h>
static void __init nexcoder_sensorboard_init(void)
{
- // Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
- s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
- s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
- // Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
- s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
- s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+ /* Initialize SCCB bus */
+ gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(14)); /* IICSCL */
+ gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(15)); /* IICSDA */
+
+ /* Power up the sensor board */
+ gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
}
static void __init nexcoder_map_io(void)
},
};
-static int __init osiris_dvs_init(void)
-{
- return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
- platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
+module_platform_driver(osiris_dvs_driver);
MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(21));
return 0;
}
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
#include "common.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <mach/fb.h>
#include <plat/clock.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
#include <mach/regs-s3c2443-clock.h>
#include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <plat/regs-fb-v4.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2443.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
struct platform_device;
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/devs.h>
#include "simtec.h"
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/devs.h>
#include "simtec.h"
#include <mach/dma.h>
#include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
static const char *rclksrc[] = {
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <mach/crag6410.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/keypad.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include "common.h"
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
#include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include "common.h"
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
void s3c64xx_ide_setup_gpio(void)
{
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/adc.h>
#include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s5p-time.h>
#include "common.h"
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/assabet.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/mach/serial_sa1100.h>
#include <mach/cerf.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
+++ /dev/null
-/*
- * arch/arm/mach-sa1100/include/mach/mcp.h
- *
- * Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
- u32 mccr0;
- u32 mccr1;
- unsigned int sclk_rate;
- void *codec_pdata;
-};
-
-#endif
#define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22)
#define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23)
-#define CS3_BASE 0xf1000000
+#define CS3_BASE IOMEM(0xf1000000)
long simpad_get_cs3_ro(void);
long simpad_get_cs3_shadow(void);
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/shannon.h>
#include <mach/irqs.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/simpad.h>
#include <mach/irqs.h>
.length = 0x00800000,
.type = MT_DEVICE
}, { /* Simpad CS3 */
- .virtual = CS3_BASE,
+ .virtual = (unsigned long)CS3_BASE,
.pfn = __phys_to_pfn(SA1100_CS3_PHYS),
.length = 0x00100000,
.type = MT_DEVICE
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#define IO_BASE 0xe0000000
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
extern void shark_init_irq(void);
-static struct map_desc shark_io_desc[] __initdata = {
- {
- .virtual = IO_BASE,
- .pfn = __phys_to_pfn(IO_START),
- .length = IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init shark_map_io(void)
-{
- iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
-}
-
#define IRQ_TIMER 0
#define HZ_TIME ((1193180 + HZ/2) / HZ)
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
- .map_io = shark_map_io,
.init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
*/
.macro addruart, rp, rv, tmp
- mov \rp, #0xe0000000
- orr \rp, \rp, #0x000003f8
- mov \rv, \rp
+ mov \rp, #0x3f8
+ orr \rv, \rp, #0xfe000000
+ orr \rv, \rv, #0x00e00000
+ orr \rp, \rp, #0x40000000
.endm
.macro senduart,rd,rx
* warranty of any kind, whether express or implied.
*/
.macro get_irqnr_preamble, base, tmp
- mov \base, #0xe0000000
+ mov \base, #0xfe000000
+ orr \base, \base, #0x00e00000
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(0xe0000000 + (a)))
-
-#endif
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#define IO_START 0x40000000
+
static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->number == 0)
pcibios_min_mem = 0x50000000;
vga_base = 0xe8000000;
+ pci_ioremap_io(0, IO_START);
+
pci_common_init(&shark_pci);
return 0;
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
-#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
}
MACHINE_START(AG5EVM, "ag5evm")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
return;
/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+ __raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008));
}
static struct r8a66597_platdata usb1_host_data = {
};
-#define GPIO_PORT9CR 0xE6051009
-#define GPIO_PORT10CR 0xE605100A
-#define USCCR1 0xE6058144
+#define GPIO_PORT9CR IOMEM(0xE6051009)
+#define GPIO_PORT10CR IOMEM(0xE605100A)
+#define USCCR1 IOMEM(0xE6058144)
static void __init ap4evb_init(void)
{
u32 srcr4;
gpio_request(GPIO_FN_OVCN2_1, NULL);
/* setup USB phy */
- __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+ __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_HDMI_CEC, NULL);
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-#define SRCR4 0xe61580bc
+#define SRCR4 IOMEM(0xe61580bc)
srcr4 = __raw_readl(SRCR4);
__raw_writel(srcr4 | (1 << 13), SRCR4);
udelay(50);
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "sh-gpio.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
* usbhsf_power_ctrl()
*/
#define IRQ7 evt2irq(0x02e0)
-#define USBCR1 0xe605810a
+#define USBCR1 IOMEM(0xe605810a)
#define USBH 0xC6700000
#define USBH_USBCTR 0x10834
/*
* board init
*/
-#define GPIO_PORT7CR 0xe6050007
-#define GPIO_PORT8CR 0xe6050008
+#define GPIO_PORT7CR IOMEM(0xe6050007)
+#define GPIO_PORT8CR IOMEM(0xe6050008)
static void __init eva_init(void)
{
struct platform_device *usb = NULL;
#define FPGA_ETH_IRQ (FPGA_IRQ0 + 15)
static u16 bonito_fpga_read(u32 offset)
{
- return __raw_readw(0xf0003000 + offset);
+ return __raw_readw(IOMEM(0xf0003000) + offset);
}
static void bonito_fpga_write(u32 offset, u16 val)
{
- __raw_writew(val, 0xf0003000 + offset);
+ __raw_writew(val, IOMEM(0xf0003000) + offset);
}
static void bonito_fpga_irq_disable(struct irq_data *data)
#define BIT_ON(sw, bit) (sw & (1 << bit))
#define BIT_OFF(sw, bit) (!(sw & (1 << bit)))
-#define VCCQ1CR 0xE6058140
-#define VCCQ1LCDCR 0xE6058186
+#define VCCQ1CR IOMEM(0xE6058140)
+#define VCCQ1LCDCR IOMEM(0xE6058186)
static void __init bonito_init(void)
{
return;
/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
- __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+ __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
}
static struct r8a66597_platdata usb_host_data = {
gpio_request(GPIO_FN_IDIN, NULL);
/* setup USB phy */
- __raw_writew(0x0300, 0xe605810a); /* USBCR1 */
- __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
- __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
- __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+ __raw_writew(0x0300, IOMEM(0xe605810a)); /* USBCR1 */
+ __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */
+ __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */
+ __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */
/* KEYSC @ CN7 */
gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
/* FOE, FCDE, FSC on dedicated pins */
- __raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+ __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048));
/* IrDA */
gpio_request(GPIO_FN_IRDA_OUT, NULL);
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "sh-gpio.h"
+
/*
* SDHI
*
return;
/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
- __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+ __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
}
static struct r8a66597_platdata usb_host_data = {
&sdhi1_device,
};
-#define GPIO_SDHID0_D0 0xe60520fc
-#define GPIO_SDHID0_D1 0xe60520fd
-#define GPIO_SDHID0_D2 0xe60520fe
-#define GPIO_SDHID0_D3 0xe60520ff
-#define GPIO_SDHICMD0 0xe6052100
+#define GPIO_SDHID0_D0 IOMEM(0xe60520fc)
+#define GPIO_SDHID0_D1 IOMEM(0xe60520fd)
+#define GPIO_SDHID0_D2 IOMEM(0xe60520fe)
+#define GPIO_SDHID0_D3 IOMEM(0xe60520ff)
+#define GPIO_SDHICMD0 IOMEM(0xe6052100)
-#define GPIO_SDHID1_D0 0xe6052103
-#define GPIO_SDHID1_D1 0xe6052104
-#define GPIO_SDHID1_D2 0xe6052105
-#define GPIO_SDHID1_D3 0xe6052106
-#define GPIO_SDHICMD1 0xe6052107
+#define GPIO_SDHID1_D0 IOMEM(0xe6052103)
+#define GPIO_SDHID1_D1 IOMEM(0xe6052104)
+#define GPIO_SDHID1_D2 IOMEM(0xe6052105)
+#define GPIO_SDHID1_D3 IOMEM(0xe6052106)
+#define GPIO_SDHICMD1 IOMEM(0xe6052107)
static void __init g4evm_init(void)
{
gpio_request(GPIO_FN_IDIN, NULL);
/* setup USB phy */
- __raw_writew(0x0200, 0xe605810a); /* USBCR1 */
- __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
- __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
- __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+ __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */
+ __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */
+ __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */
+ __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */
/* KEYSC @ CN31 */
gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
}
MACHINE_START(KOTA2, "kota2")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
};
DT_MACHINE_START(KZM9D_DT, "kzm9d")
+ .smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
/* USB Func CN17 */
struct usbhs_private {
- unsigned int phy;
- unsigned int cr2;
+ void __iomem *phy;
+ void __iomem *cr2;
struct renesas_usbhs_platform_info info;
};
};
static struct usbhs_private usbhs_private = {
- .phy = 0xe60781e0, /* USBPHYINT */
- .cr2 = 0xe605810c, /* USBCR2 */
+ .phy = IOMEM(0xe60781e0), /* USBPHYINT */
+ .cr2 = IOMEM(0xe605810c), /* USBCR2 */
.info = {
.platform_callback = {
.hardware_init = usbhs_hardware_init,
platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
}
+static void kzm9g_restart(char mode, const char *cmd)
+{
+#define RESCNT2 0xe6188020
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
static const char *kzm9g_boards_compat_dt[] __initdata = {
"renesas,kzm9g",
NULL,
};
DT_MACHINE_START(KZM9G_DT, "kzm9g")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
+ .restart = kzm9g_restart,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
#define USBHS0_POLL_INTERVAL (HZ * 5)
struct usbhs_private {
- unsigned int usbphyaddr;
- unsigned int usbcrcaddr;
+ void __iomem *usbphyaddr;
+ void __iomem *usbcrcaddr;
struct renesas_usbhs_platform_info info;
struct delayed_work work;
struct platform_device *pdev;
}
static struct usbhs_private usbhs0_private = {
- .usbcrcaddr = 0xe605810c, /* USBCR2 */
+ .usbcrcaddr = IOMEM(0xe605810c), /* USBCR2 */
.info = {
.platform_callback = {
.hardware_init = usbhs0_hardware_init,
};
static struct usbhs_private usbhs1_private = {
- .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
- .usbcrcaddr = 0xe6058130, /* USBCR4 */
+ .usbphyaddr = IOMEM(0xe60581e2), /* USBPHY1INTAP */
+ .usbcrcaddr = IOMEM(0xe6058130), /* USBCR4 */
.info = {
.platform_callback = {
.hardware_init = usbhs1_hardware_init,
},
};
-#define GPIO_PORT9CR 0xE6051009
-#define GPIO_PORT10CR 0xE605100A
-#define GPIO_PORT167CR 0xE60520A7
-#define GPIO_PORT168CR 0xE60520A8
-#define SRCR4 0xe61580bc
-#define USCCR1 0xE6058144
+#define GPIO_PORT9CR IOMEM(0xE6051009)
+#define GPIO_PORT10CR IOMEM(0xE605100A)
+#define GPIO_PORT167CR IOMEM(0xE60520A7)
+#define GPIO_PORT168CR IOMEM(0xE60520A8)
+#define SRCR4 IOMEM(0xe61580bc)
+#define USCCR1 IOMEM(0xE6058144)
static void __init mackerel_init(void)
{
u32 srcr4;
}
MACHINE_START(MARZEN, "marzen")
+ .smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = r8a7779_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
*/
/* CPG registers */
-#define FRQCRA 0xe6150000
-#define FRQCRB 0xe6150004
-#define VCLKCR1 0xE6150008
-#define VCLKCR2 0xE615000c
-#define FRQCRC 0xe61500e0
-#define FSIACKCR 0xe6150018
-#define PLLC01CR 0xe6150028
-
-#define SUBCKCR 0xe6150080
-#define USBCKCR 0xe615008c
-
-#define MSTPSR0 0xe6150030
-#define MSTPSR1 0xe6150038
-#define MSTPSR2 0xe6150040
-#define MSTPSR3 0xe6150048
-#define MSTPSR4 0xe615004c
-#define FSIBCKCR 0xe6150090
-#define HDMICKCR 0xe6150094
-#define SMSTPCR0 0xe6150130
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR4 0xe6150140
+#define FRQCRA IOMEM(0xe6150000)
+#define FRQCRB IOMEM(0xe6150004)
+#define VCLKCR1 IOMEM(0xE6150008)
+#define VCLKCR2 IOMEM(0xE615000c)
+#define FRQCRC IOMEM(0xe61500e0)
+#define FSIACKCR IOMEM(0xe6150018)
+#define PLLC01CR IOMEM(0xe6150028)
+
+#define SUBCKCR IOMEM(0xe6150080)
+#define USBCKCR IOMEM(0xe615008c)
+
+#define MSTPSR0 IOMEM(0xe6150030)
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR4 IOMEM(0xe615004c)
+#define FSIBCKCR IOMEM(0xe6150090)
+#define HDMICKCR IOMEM(0xe6150094)
+#define SMSTPCR0 IOMEM(0xe6150130)
+#define SMSTPCR1 IOMEM(0xe6150134)
+#define SMSTPCR2 IOMEM(0xe6150138)
+#define SMSTPCR3 IOMEM(0xe615013c)
+#define SMSTPCR4 IOMEM(0xe6150140)
/* Fixed 32 KHz root clock from EXTALR pin */
static struct clk extalr_clk = {
0x0300, CLK_ENABLE_ON_INIT),
};
-enum { MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
+enum { MSTP323, MSTP322, MSTP321, MSTP320,
+ MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015, MSTP014,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
+ [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
+ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
+ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
};
void __init r8a7779_clock_init(void)
#include <mach/common.h>
/* SH7367 registers */
-#define RTFRQCR 0xe6150000
-#define SYFRQCR 0xe6150004
-#define CMFRQCR 0xe61500E0
-#define VCLKCR1 0xe6150008
-#define VCLKCR2 0xe615000C
-#define VCLKCR3 0xe615001C
-#define SCLKACR 0xe6150010
-#define SCLKBCR 0xe6150014
-#define SUBUSBCKCR 0xe6158080
-#define SPUCKCR 0xe6150084
-#define MSUCKCR 0xe6150088
-#define MVI3CKCR 0xe6150090
-#define VOUCKCR 0xe6150094
-#define MFCK1CR 0xe6150098
-#define MFCK2CR 0xe615009C
-#define PLLC1CR 0xe6150028
-#define PLLC2CR 0xe615002C
-#define RTMSTPCR0 0xe6158030
-#define RTMSTPCR2 0xe6158038
-#define SYMSTPCR0 0xe6158040
-#define SYMSTPCR2 0xe6158048
-#define CMMSTPCR0 0xe615804c
+#define RTFRQCR IOMEM(0xe6150000)
+#define SYFRQCR IOMEM(0xe6150004)
+#define CMFRQCR IOMEM(0xe61500E0)
+#define VCLKCR1 IOMEM(0xe6150008)
+#define VCLKCR2 IOMEM(0xe615000C)
+#define VCLKCR3 IOMEM(0xe615001C)
+#define SCLKACR IOMEM(0xe6150010)
+#define SCLKBCR IOMEM(0xe6150014)
+#define SUBUSBCKCR IOMEM(0xe6158080)
+#define SPUCKCR IOMEM(0xe6150084)
+#define MSUCKCR IOMEM(0xe6150088)
+#define MVI3CKCR IOMEM(0xe6150090)
+#define VOUCKCR IOMEM(0xe6150094)
+#define MFCK1CR IOMEM(0xe6150098)
+#define MFCK2CR IOMEM(0xe615009C)
+#define PLLC1CR IOMEM(0xe6150028)
+#define PLLC2CR IOMEM(0xe615002C)
+#define RTMSTPCR0 IOMEM(0xe6158030)
+#define RTMSTPCR2 IOMEM(0xe6158038)
+#define SYMSTPCR0 IOMEM(0xe6158040)
+#define SYMSTPCR2 IOMEM(0xe6158048)
+#define CMMSTPCR0 IOMEM(0xe615804c)
/* Fixed 32 KHz root clock from EXTALR pin */
static struct clk r_clk = {
#include <mach/common.h>
/* SH7372 registers */
-#define FRQCRA 0xe6150000
-#define FRQCRB 0xe6150004
-#define FRQCRC 0xe61500e0
-#define FRQCRD 0xe61500e4
-#define VCLKCR1 0xe6150008
-#define VCLKCR2 0xe615000c
-#define VCLKCR3 0xe615001c
-#define FMSICKCR 0xe6150010
-#define FMSOCKCR 0xe6150014
-#define FSIACKCR 0xe6150018
-#define FSIBCKCR 0xe6150090
-#define SUBCKCR 0xe6150080
-#define SPUCKCR 0xe6150084
-#define VOUCKCR 0xe6150088
-#define HDMICKCR 0xe6150094
-#define DSITCKCR 0xe6150060
-#define DSI0PCKCR 0xe6150064
-#define DSI1PCKCR 0xe6150098
-#define PLLC01CR 0xe6150028
-#define PLLC2CR 0xe615002c
-#define RMSTPCR0 0xe6150110
-#define RMSTPCR1 0xe6150114
-#define RMSTPCR2 0xe6150118
-#define RMSTPCR3 0xe615011c
-#define RMSTPCR4 0xe6150120
-#define SMSTPCR0 0xe6150130
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR4 0xe6150140
+#define FRQCRA IOMEM(0xe6150000)
+#define FRQCRB IOMEM(0xe6150004)
+#define FRQCRC IOMEM(0xe61500e0)
+#define FRQCRD IOMEM(0xe61500e4)
+#define VCLKCR1 IOMEM(0xe6150008)
+#define VCLKCR2 IOMEM(0xe615000c)
+#define VCLKCR3 IOMEM(0xe615001c)
+#define FMSICKCR IOMEM(0xe6150010)
+#define FMSOCKCR IOMEM(0xe6150014)
+#define FSIACKCR IOMEM(0xe6150018)
+#define FSIBCKCR IOMEM(0xe6150090)
+#define SUBCKCR IOMEM(0xe6150080)
+#define SPUCKCR IOMEM(0xe6150084)
+#define VOUCKCR IOMEM(0xe6150088)
+#define HDMICKCR IOMEM(0xe6150094)
+#define DSITCKCR IOMEM(0xe6150060)
+#define DSI0PCKCR IOMEM(0xe6150064)
+#define DSI1PCKCR IOMEM(0xe6150098)
+#define PLLC01CR IOMEM(0xe6150028)
+#define PLLC2CR IOMEM(0xe615002c)
+#define RMSTPCR0 IOMEM(0xe6150110)
+#define RMSTPCR1 IOMEM(0xe6150114)
+#define RMSTPCR2 IOMEM(0xe6150118)
+#define RMSTPCR3 IOMEM(0xe615011c)
+#define RMSTPCR4 IOMEM(0xe6150120)
+#define SMSTPCR0 IOMEM(0xe6150130)
+#define SMSTPCR1 IOMEM(0xe6150134)
+#define SMSTPCR2 IOMEM(0xe6150138)
+#define SMSTPCR3 IOMEM(0xe615013c)
+#define SMSTPCR4 IOMEM(0xe6150140)
#define FSIDIVA 0xFE1F8000
#define FSIDIVB 0xFE1F8008
#include <mach/common.h>
/* SH7377 registers */
-#define RTFRQCR 0xe6150000
-#define SYFRQCR 0xe6150004
-#define CMFRQCR 0xe61500E0
-#define VCLKCR1 0xe6150008
-#define VCLKCR2 0xe615000C
-#define VCLKCR3 0xe615001C
-#define FMSICKCR 0xe6150010
-#define FMSOCKCR 0xe6150014
-#define FSICKCR 0xe6150018
-#define PLLC1CR 0xe6150028
-#define PLLC2CR 0xe615002C
-#define SUBUSBCKCR 0xe6150080
-#define SPUCKCR 0xe6150084
-#define MSUCKCR 0xe6150088
-#define MVI3CKCR 0xe6150090
-#define HDMICKCR 0xe6150094
-#define MFCK1CR 0xe6150098
-#define MFCK2CR 0xe615009C
-#define DSITCKCR 0xe6150060
-#define DSIPCKCR 0xe6150064
-#define SMSTPCR0 0xe6150130
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013C
-#define SMSTPCR4 0xe6150140
+#define RTFRQCR IOMEM(0xe6150000)
+#define SYFRQCR IOMEM(0xe6150004)
+#define CMFRQCR IOMEM(0xe61500E0)
+#define VCLKCR1 IOMEM(0xe6150008)
+#define VCLKCR2 IOMEM(0xe615000C)
+#define VCLKCR3 IOMEM(0xe615001C)
+#define FMSICKCR IOMEM(0xe6150010)
+#define FMSOCKCR IOMEM(0xe6150014)
+#define FSICKCR IOMEM(0xe6150018)
+#define PLLC1CR IOMEM(0xe6150028)
+#define PLLC2CR IOMEM(0xe615002C)
+#define SUBUSBCKCR IOMEM(0xe6150080)
+#define SPUCKCR IOMEM(0xe6150084)
+#define MSUCKCR IOMEM(0xe6150088)
+#define MVI3CKCR IOMEM(0xe6150090)
+#define HDMICKCR IOMEM(0xe6150094)
+#define MFCK1CR IOMEM(0xe6150098)
+#define MFCK2CR IOMEM(0xe615009C)
+#define DSITCKCR IOMEM(0xe6150060)
+#define DSIPCKCR IOMEM(0xe6150064)
+#define SMSTPCR0 IOMEM(0xe6150130)
+#define SMSTPCR1 IOMEM(0xe6150134)
+#define SMSTPCR2 IOMEM(0xe6150138)
+#define SMSTPCR3 IOMEM(0xe615013C)
+#define SMSTPCR4 IOMEM(0xe6150140)
/* Fixed 32 KHz root clock from EXTALR pin */
static struct clk r_clk = {
#include <linux/clkdev.h>
#include <mach/common.h>
-#define FRQCRA 0xe6150000
-#define FRQCRB 0xe6150004
-#define FRQCRD 0xe61500e4
-#define VCLKCR1 0xe6150008
-#define VCLKCR2 0xe615000C
-#define VCLKCR3 0xe615001C
-#define ZBCKCR 0xe6150010
-#define FLCKCR 0xe6150014
-#define SD0CKCR 0xe6150074
-#define SD1CKCR 0xe6150078
-#define SD2CKCR 0xe615007C
-#define FSIACKCR 0xe6150018
-#define FSIBCKCR 0xe6150090
-#define SUBCKCR 0xe6150080
-#define SPUACKCR 0xe6150084
-#define SPUVCKCR 0xe6150094
-#define MSUCKCR 0xe6150088
-#define HSICKCR 0xe615008C
-#define MFCK1CR 0xe6150098
-#define MFCK2CR 0xe615009C
-#define DSITCKCR 0xe6150060
-#define DSI0PCKCR 0xe6150064
-#define DSI1PCKCR 0xe6150068
+#define FRQCRA IOMEM(0xe6150000)
+#define FRQCRB IOMEM(0xe6150004)
+#define FRQCRD IOMEM(0xe61500e4)
+#define VCLKCR1 IOMEM(0xe6150008)
+#define VCLKCR2 IOMEM(0xe615000C)
+#define VCLKCR3 IOMEM(0xe615001C)
+#define ZBCKCR IOMEM(0xe6150010)
+#define FLCKCR IOMEM(0xe6150014)
+#define SD0CKCR IOMEM(0xe6150074)
+#define SD1CKCR IOMEM(0xe6150078)
+#define SD2CKCR IOMEM(0xe615007C)
+#define FSIACKCR IOMEM(0xe6150018)
+#define FSIBCKCR IOMEM(0xe6150090)
+#define SUBCKCR IOMEM(0xe6150080)
+#define SPUACKCR IOMEM(0xe6150084)
+#define SPUVCKCR IOMEM(0xe6150094)
+#define MSUCKCR IOMEM(0xe6150088)
+#define HSICKCR IOMEM(0xe615008C)
+#define MFCK1CR IOMEM(0xe6150098)
+#define MFCK2CR IOMEM(0xe615009C)
+#define DSITCKCR IOMEM(0xe6150060)
+#define DSI0PCKCR IOMEM(0xe6150064)
+#define DSI1PCKCR IOMEM(0xe6150068)
#define DSI0PHYCR 0xe615006C
#define DSI1PHYCR 0xe6150070
-#define PLLECR 0xe61500d0
-#define PLL0CR 0xe61500d8
-#define PLL1CR 0xe6150028
-#define PLL2CR 0xe615002c
-#define PLL3CR 0xe61500dc
-#define SMSTPCR0 0xe6150130
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR4 0xe6150140
-#define SMSTPCR5 0xe6150144
-#define CKSCR 0xe61500c0
+#define PLLECR IOMEM(0xe61500d0)
+#define PLL0CR IOMEM(0xe61500d8)
+#define PLL1CR IOMEM(0xe6150028)
+#define PLL2CR IOMEM(0xe615002c)
+#define PLL3CR IOMEM(0xe61500dc)
+#define SMSTPCR0 IOMEM(0xe6150130)
+#define SMSTPCR1 IOMEM(0xe6150134)
+#define SMSTPCR2 IOMEM(0xe6150138)
+#define SMSTPCR3 IOMEM(0xe615013c)
+#define SMSTPCR4 IOMEM(0xe6150140)
+#define SMSTPCR5 IOMEM(0xe6150144)
+#define CKSCR IOMEM(0xe61500c0)
/* Fixed 32 KHz root clock from EXTALR pin */
static struct clk r_clk = {
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <mach/common.h>
+#include <mach/r8a7779.h>
+#include <mach/emev2.h>
#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
static cpumask_t dead_cpus;
-int platform_cpu_kill(unsigned int cpu)
-{
- int k;
-
- /* this function is running on another CPU than the offline target,
- * here we need wait for shutdown code in platform_cpu_die() to
- * finish before asking SoC-specific code to power off the CPU core.
- */
- for (k = 0; k < 1000; k++) {
- if (cpumask_test_cpu(cpu, &dead_cpus))
- return shmobile_platform_cpu_kill(cpu);
-
- mdelay(1);
- }
-
- return 0;
-}
-
-void platform_cpu_die(unsigned int cpu)
+void shmobile_cpu_die(unsigned int cpu)
{
/* hardware shutdown code running on the CPU that is being offlined */
flush_cache_all();
}
}
-int platform_cpu_disable(unsigned int cpu)
+int shmobile_cpu_disable(unsigned int cpu)
{
cpumask_clear_cpu(cpu, &dead_cpus);
/*
*/
return cpu == 0 ? -EPERM : 0;
}
+
+int shmobile_cpu_is_dead(unsigned int cpu)
+{
+ return cpumask_test_cpu(cpu, &dead_cpus);
+}
extern void shmobile_earlytimer_init(void);
extern struct sys_timer shmobile_timer;
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div);
+ unsigned int mult, unsigned int div);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
-extern int shmobile_platform_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
-extern unsigned int sh73a0_get_core_count(void);
-extern void sh73a0_secondary_init(unsigned int cpu);
-extern int sh73a0_boot_secondary(unsigned int cpu);
-extern void sh73a0_smp_prepare_cpus(void);
-
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7779_pm_init(void);
extern void r8a7740_meram_workaround(void);
-extern unsigned int r8a7779_get_core_count(void);
-extern int r8a7779_platform_cpu_kill(unsigned int cpu);
-extern void r8a7779_secondary_init(unsigned int cpu);
-extern int r8a7779_boot_secondary(unsigned int cpu);
-extern void r8a7779_smp_prepare_cpus(void);
extern void r8a7779_register_twd(void);
extern void shmobile_init_late(void);
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
+extern void shmobile_cpu_die(unsigned int cpu);
+extern int shmobile_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int shmobile_cpu_is_dead(unsigned int cpu);
+#else
+static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
+#endif
+
+extern void shmobile_smp_init_cpus(unsigned int ncores);
+
#endif /* __ARCH_MACH_COMMON_H */
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
extern void emev2_set_boot_vector(unsigned long value);
-extern unsigned int emev2_get_core_count(void);
-extern int emev2_platform_cpu_kill(unsigned int cpu);
-extern void emev2_secondary_init(unsigned int cpu);
-extern int emev2_boot_secondary(unsigned int cpu);
-extern void emev2_smp_prepare_cpus(void);
#define EMEV2_GPIO_BASE 200
#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
+extern struct smp_operations emev2_smp_ops;
+
#endif /* __ASM_EMEV2_H__ */
+++ /dev/null
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sh_pfc.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(u32 addr)
-{
- __raw_writeb(0x00, addr);
-}
-
-static inline void __init gpio_request_pullup(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xC0;
- __raw_writeb(data, addr);
-}
-
-static inline void __init gpio_request_pulldown(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xA0;
-
- __raw_writeb(data, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
#define r8a7779_add_device_to_domain(pd, pdev) do { } while (0)
#endif /* CONFIG_PM */
+extern struct smp_operations r8a7779_smp_ops;
+
#endif /* __ASM_R8A7779_H__ */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
+extern struct smp_operations sh73a0_smp_ops;
+
#endif /* __ASM_SH73A0_H__ */
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#define INT2SMSKCR0 0xfe7822a0
-#define INT2SMSKCR1 0xfe7822a4
-#define INT2SMSKCR2 0xfe7822a8
-#define INT2SMSKCR3 0xfe7822ac
-#define INT2SMSKCR4 0xfe7822b0
+#define INT2SMSKCR0 IOMEM(0xfe7822a0)
+#define INT2SMSKCR1 IOMEM(0xfe7822a4)
+#define INT2SMSKCR2 IOMEM(0xfe7822a8)
+#define INT2SMSKCR3 IOMEM(0xfe7822ac)
+#define INT2SMSKCR4 IOMEM(0xfe7822b0)
-#define INT2NTSR0 0xfe700060
-#define INT2NTSR1 0xfe700064
+#define INT2NTSR0 IOMEM(0xfe700060)
+#define INT2NTSR1 IOMEM(0xfe700064)
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
__raw_writeb(ffd5[k], intcs_ffd5 + k);
}
+#define E694_BASE IOMEM(0xe6940000)
+#define E695_BASE IOMEM(0xe6950000)
+
static unsigned short e694[0x200];
static unsigned short e695[0x200];
int k;
for (k = 0x00; k <= 0x38; k += 4)
- e694[k] = __raw_readw(0xe6940000 + k);
+ e694[k] = __raw_readw(E694_BASE + k);
for (k = 0x80; k <= 0xb4; k += 4)
- e694[k] = __raw_readb(0xe6940000 + k);
+ e694[k] = __raw_readb(E694_BASE + k);
for (k = 0x180; k <= 0x1b4; k += 4)
- e694[k] = __raw_readb(0xe6940000 + k);
+ e694[k] = __raw_readb(E694_BASE + k);
for (k = 0x00; k <= 0x50; k += 4)
- e695[k] = __raw_readw(0xe6950000 + k);
+ e695[k] = __raw_readw(E695_BASE + k);
for (k = 0x80; k <= 0xa8; k += 4)
- e695[k] = __raw_readb(0xe6950000 + k);
+ e695[k] = __raw_readb(E695_BASE + k);
for (k = 0x180; k <= 0x1a8; k += 4)
- e695[k] = __raw_readb(0xe6950000 + k);
+ e695[k] = __raw_readb(E695_BASE + k);
}
void sh7372_intca_resume(void)
int k;
for (k = 0x00; k <= 0x38; k += 4)
- __raw_writew(e694[k], 0xe6940000 + k);
+ __raw_writew(e694[k], E694_BASE + k);
for (k = 0x80; k <= 0xb4; k += 4)
- __raw_writeb(e694[k], 0xe6940000 + k);
+ __raw_writeb(e694[k], E694_BASE + k);
for (k = 0x180; k <= 0x1b4; k += 4)
- __raw_writeb(e694[k], 0xe6940000 + k);
+ __raw_writeb(e694[k], E694_BASE + k);
for (k = 0x00; k <= 0x50; k += 4)
- __raw_writew(e695[k], 0xe6950000 + k);
+ __raw_writew(e695[k], E695_BASE + k);
for (k = 0x80; k <= 0xa8; k += 4)
- __raw_writeb(e695[k], 0xe6950000 + k);
+ __raw_writeb(e695[k], E695_BASE + k);
for (k = 0x180; k <= 0x1a8; k += 4)
- __raw_writeb(e695[k], 0xe6950000 + k);
+ __raw_writeb(e695[k], E695_BASE + k);
}
static struct irqaction sh73a0_irq_pin_cascade[32];
-#define PINTER0 0xe69000a0
-#define PINTER1 0xe69000a4
-#define PINTRR0 0xe69000d0
-#define PINTRR1 0xe69000d4
+#define PINTER0_PHYS 0xe69000a0
+#define PINTER1_PHYS 0xe69000a4
+#define PINTER0_VIRT IOMEM(0xe69000a0)
+#define PINTER1_VIRT IOMEM(0xe69000a4)
+#define PINTRR0 IOMEM(0xe69000d0)
+#define PINTRR1 IOMEM(0xe69000d4)
#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0", \
+INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0", \
INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ), \
INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ), \
INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1", \
+INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1", \
INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE, \
INTC_PINT_V_NONE, INTC_PINT_V_NONE, \
static struct irqaction sh73a0_pint0_cascade;
static struct irqaction sh73a0_pint1_cascade;
-static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
+static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
{
unsigned long value = ioread32(rr) & ioread32(er);
int k;
static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
{
- pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
+ pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
return IRQ_HANDLED;
}
static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
{
- pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
+ pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
return IRQ_HANDLED;
}
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/r8a7740.h>
#include <mach/irqs.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <linux/ioport.h>
#include <mach/r8a7779.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7367.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7377.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh73a0.h>
#include <mach/irqs.h>
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/of.h>
#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#ifdef CONFIG_ARCH_SH73A0
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
- of_machine_is_compatible("renesas,sh73a0"))
-#else
-#define is_sh73a0() (0)
-#endif
-
-#define is_r8a7779() machine_is_marzen()
-
-#ifdef CONFIG_ARCH_EMEV2
-#define is_emev2() of_machine_is_compatible("renesas,emev2")
-#else
-#define is_emev2() (0)
-#endif
-
-static unsigned int __init shmobile_smp_get_core_count(void)
-{
- if (is_sh73a0())
- return sh73a0_get_core_count();
-
- if (is_r8a7779())
- return r8a7779_get_core_count();
-
- if (is_emev2())
- return emev2_get_core_count();
-
- return 1;
-}
-
-static void __init shmobile_smp_prepare_cpus(void)
-{
- if (is_sh73a0())
- sh73a0_smp_prepare_cpus();
-
- if (is_r8a7779())
- r8a7779_smp_prepare_cpus();
-
- if (is_emev2())
- emev2_smp_prepare_cpus();
-}
-
-int shmobile_platform_cpu_kill(unsigned int cpu)
-{
- if (is_r8a7779())
- return r8a7779_platform_cpu_kill(cpu);
-
- if (is_emev2())
- return emev2_platform_cpu_kill(cpu);
-
- return 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __init shmobile_smp_init_cpus(unsigned int ncores)
{
- trace_hardirqs_off();
-
- if (is_sh73a0())
- sh73a0_secondary_init(cpu);
-
- if (is_r8a7779())
- r8a7779_secondary_init(cpu);
-
- if (is_emev2())
- emev2_secondary_init(cpu);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- if (is_sh73a0())
- return sh73a0_boot_secondary(cpu);
-
- if (is_r8a7779())
- return r8a7779_boot_secondary(cpu);
-
- if (is_emev2())
- return emev2_boot_secondary(cpu);
-
- return -ENOSYS;
-}
-
-void __init smp_init_cpus(void)
-{
- unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
if (ncores > nr_cpu_ids) {
set_smp_cross_call(gic_raise_softirq);
}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
- shmobile_smp_prepare_cpus();
-}
#include <mach/pm-rmobile.h>
/* SYSC */
-#define SPDCR 0xe6180008
-#define SWUCR 0xe6180014
-#define PSTR 0xe6180080
+#define SPDCR IOMEM(0xe6180008)
+#define SWUCR IOMEM(0xe6180014)
+#define PSTR IOMEM(0xe6180080)
#define PSTR_RETRIES 100
#define PSTR_DELAY_US 10
#include <mach/pm-rmobile.h>
/* DBG */
-#define DBGREG1 0xe6100020
-#define DBGREG9 0xe6100040
+#define DBGREG1 IOMEM(0xe6100020)
+#define DBGREG9 IOMEM(0xe6100040)
/* CPGA */
-#define SYSTBCR 0xe6150024
-#define MSTPSR0 0xe6150030
-#define MSTPSR1 0xe6150038
-#define MSTPSR2 0xe6150040
-#define MSTPSR3 0xe6150048
-#define MSTPSR4 0xe615004c
-#define PLLC01STPCR 0xe61500c8
+#define SYSTBCR IOMEM(0xe6150024)
+#define MSTPSR0 IOMEM(0xe6150030)
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR4 IOMEM(0xe615004c)
+#define PLLC01STPCR IOMEM(0xe61500c8)
/* SYSC */
-#define SBAR 0xe6180020
-#define WUPRMSK 0xe6180028
-#define WUPSMSK 0xe618002c
-#define WUPSMSK2 0xe6180048
-#define WUPSFAC 0xe6180098
-#define IRQCR 0xe618022c
-#define IRQCR2 0xe6180238
-#define IRQCR3 0xe6180244
-#define IRQCR4 0xe6180248
-#define PDNSEL 0xe6180254
+#define SBAR IOMEM(0xe6180020)
+#define WUPRMSK IOMEM(0xe6180028)
+#define WUPSMSK IOMEM(0xe618002c)
+#define WUPSMSK2 IOMEM(0xe6180048)
+#define WUPSFAC IOMEM(0xe6180098)
+#define IRQCR IOMEM(0xe618022c)
+#define IRQCR2 IOMEM(0xe6180238)
+#define IRQCR3 IOMEM(0xe6180244)
+#define IRQCR4 IOMEM(0xe6180248)
+#define PDNSEL IOMEM(0xe6180254)
/* INTC */
-#define ICR1A 0xe6900000
-#define ICR2A 0xe6900004
-#define ICR3A 0xe6900008
-#define ICR4A 0xe690000c
-#define INTMSK00A 0xe6900040
-#define INTMSK10A 0xe6900044
-#define INTMSK20A 0xe6900048
-#define INTMSK30A 0xe690004c
+#define ICR1A IOMEM(0xe6900000)
+#define ICR2A IOMEM(0xe6900004)
+#define ICR3A IOMEM(0xe6900008)
+#define ICR4A IOMEM(0xe690000c)
+#define INTMSK00A IOMEM(0xe6900040)
+#define INTMSK10A IOMEM(0xe6900044)
+#define INTMSK20A IOMEM(0xe6900048)
+#define INTMSK30A IOMEM(0xe690004c)
/* MFIS */
+/* FIXME: pointing where? */
#define SMFRAM 0xe6a70000
/* AP-System Core */
-#define APARMBAREA 0xe6f10020
+#define APARMBAREA IOMEM(0xe6f10020)
#ifdef CONFIG_PM
},
};
+static struct resource pmu_resources[] = {
+ [0] = {
+ .start = 152,
+ .end = 152,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = 153,
+ .end = 153,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pmu_device = {
+ .name = "arm-pmu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pmu_resources),
+ .resource = pmu_resources,
+};
+
static struct platform_device *emev2_early_devices[] __initdata = {
&uart0_device,
&uart1_device,
&gio2_device,
&gio3_device,
&gio4_device,
+ &pmu_device,
};
void __init emev2_add_standard_devices(void)
}
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+ .smp = smp_ops(emev2_smp_ops),
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = emev2_init_irq_dt,
shmobile_earlytimer_init();
}
-#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2 IOMEM(0xe6158048)
#define SYMSTPCR2_CMT1 (1 << 29)
void __init sh7367_add_early_devices(void)
shmobile_earlytimer_init();
}
-#define SMSTPCR3 0xe615013c
+#define SMSTPCR3 IOMEM(0xe615013c)
#define SMSTPCR3_CMT1 (1 << 29)
void __init sh7377_add_early_devices(void)
},
};
+static struct resource pmu_resources[] = {
+ [0] = {
+ .start = gic_spi(55),
+ .end = gic_spi(55),
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = gic_spi(56),
+ .end = gic_spi(56),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pmu_device = {
+ .name = "arm-pmu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pmu_resources),
+ .resource = pmu_resources,
+};
+
static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&i2c4_device,
&dma0_device,
&mpdma0_device,
+ &pmu_device,
};
-#define SRCR2 0xe61580b0
+#define SRCR2 IOMEM(0xe61580b0)
void __init sh73a0_add_standard_devices(void)
{
--- /dev/null
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+/*
+ * FIXME !!
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static inline void __init gpio_direction_none(void __iomem * addr)
+{
+ __raw_writeb(0x00, addr);
+}
+
+static inline void __init gpio_request_pullup(void __iomem * addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
+static inline void __init gpio_request_pulldown(void __iomem * addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xA0;
+
+ __raw_writeb(data, addr);
+}
+
+#endif /* __ASM_ARCH_GPIO_H */
}
-unsigned int __init emev2_get_core_count(void)
+static unsigned int __init emev2_get_core_count(void)
{
if (!scu_base) {
scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
return scu_base ? scu_get_core_count(scu_base) : 1;
}
-int emev2_platform_cpu_kill(unsigned int cpu)
+static int emev2_platform_cpu_kill(unsigned int cpu)
{
return 0; /* not supported yet */
}
-void __cpuinit emev2_secondary_init(unsigned int cpu)
+static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return emev2_platform_cpu_kill(cpu);
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit emev2_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit emev2_boot_secondary(unsigned int cpu)
+static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
return 0;
}
-void __init emev2_smp_prepare_cpus(void)
+static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init emev2_smp_init_cpus(void)
+{
+ unsigned int ncores = emev2_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations emev2_smp_ops __initdata = {
+ .smp_init_cpus = emev2_smp_init_cpus,
+ .smp_prepare_cpus = emev2_smp_prepare_cpus,
+ .smp_secondary_init = emev2_secondary_init,
+ .smp_boot_secondary = emev2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = emev2_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init r8a7779_get_core_count(void)
+static unsigned int __init r8a7779_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-int r8a7779_platform_cpu_kill(unsigned int cpu)
+static int r8a7779_platform_cpu_kill(unsigned int cpu)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
return ret ? ret : 1;
}
-void __cpuinit r8a7779_secondary_init(unsigned int cpu)
+static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return r8a7779_platform_cpu_kill(cpu);
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
+static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
return ret;
}
-void __init r8a7779_smp_prepare_cpus(void)
+static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
r8a7779_platform_cpu_kill(2);
r8a7779_platform_cpu_kill(3);
}
+
+static void __init r8a7779_smp_init_cpus(void)
+{
+ unsigned int ncores = r8a7779_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations r8a7779_smp_ops __initdata = {
+ .smp_init_cpus = r8a7779_smp_init_cpus,
+ .smp_prepare_cpus = r8a7779_smp_prepare_cpus,
+ .smp_secondary_init = r8a7779_secondary_init,
+ .smp_boot_secondary = r8a7779_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = r8a7779_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <asm/smp_plat.h>
+#include <mach/sh73a0.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init sh73a0_get_core_count(void)
+static unsigned int __init sh73a0_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-void __cpuinit sh73a0_secondary_init(unsigned int cpu)
+static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
+static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
return 0;
}
-void __init sh73a0_smp_prepare_cpus(void)
+static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init sh73a0_smp_init_cpus(void)
+{
+ unsigned int ncores = sh73a0_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return 1;
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+struct smp_operations sh73a0_smp_ops __initdata = {
+ .smp_init_cpus = sh73a0_smp_init_cpus,
+ .smp_prepare_cpus = sh73a0_smp_prepare_cpus,
+ .smp_secondary_init = sh73a0_secondary_init,
+ .smp_boot_secondary = sh73a0_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = sh73a0_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
--- /dev/null
+config ARCH_SOCFPGA
+ bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select HAVE_ARM_SCU
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
+++ /dev/null
-/*
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro addruart, rp, rv, tmp
- mov \rp, #DEBUG_LL_UART_OFFSET
- orr \rp, \rp, #0x00c00000
- orr \rv, \rp, #0xfe000000 @ virtual base
- orr \rp, \rp, #0xff000000 @ physical base
- .endm
-
+++ /dev/null
-/*
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
+++ /dev/null
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
: "cc");
}
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
{
for (;;) {
wfi();
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void __cpuinit platform_cpu_die(unsigned int cpu)
+void __ref spear13xx_cpu_die(unsigned int cpu)
{
int spurious = 0;
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
- platform_do_lowpower(cpu, &spurious);
+ spear13xx_do_lowpower(cpu, &spurious);
/*
* bring this CPU back into the world of cache
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
bool dw_dma_filter(struct dma_chan *chan, void *slave);
void spear_restart(char, const char *);
void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
#ifdef CONFIG_MACH_SPEAR1310
void __init spear1310_clk_init(void);
+++ /dev/null
-/*
- * arch/arm/mach-spear13xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
#include <asm/memory.h>
#define PERIP_GRP2_BASE UL(0xB3000000)
-#define VA_PERIP_GRP2_BASE UL(0xFE000000)
+#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000)
#define MCIF_SDHCI_BASE UL(0xB3000000)
#define SYSRAM0_BASE UL(0xB3800000)
-#define VA_SYSRAM0_BASE UL(0xFE800000)
+#define VA_SYSRAM0_BASE IOMEM(0xFE800000)
#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
#define PERIP_GRP1_BASE UL(0xE0000000)
-#define VA_PERIP_GRP1_BASE UL(0xFD000000)
+#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000)
#define UART_BASE UL(0xE0000000)
-#define VA_UART_BASE UL(0xFD000000)
+#define VA_UART_BASE IOMEM(0xFD000000)
#define SSP_BASE UL(0xE0100000)
#define MISC_BASE UL(0xE0700000)
-#define VA_MISC_BASE IOMEM(UL(0xFD700000))
+#define VA_MISC_BASE IOMEM(0xFD700000)
#define A9SM_AND_MPMC_BASE UL(0xEC000000)
-#define VA_A9SM_AND_MPMC_BASE UL(0xFC000000)
+#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000)
/* A9SM peripheral offsets */
#define A9SM_PERIP_BASE UL(0xEC800000)
-#define VA_A9SM_PERIP_BASE UL(0xFC800000)
+#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000)
#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00)
#define L2CC_BASE UL(0xED000000)
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
+#include <mach/generic.h>
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
-extern void spear13xx_secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init spear13xx_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base);
*/
__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
}
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+ .smp_init_cpus = spear13xx_smp_init_cpus,
+ .smp_prepare_cpus = spear13xx_smp_prepare_cpus,
+ .smp_secondary_init = spear13xx_secondary_init,
+ .smp_boot_secondary = spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = spear13xx_cpu_die,
+#endif
+};
}
DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear1310_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
};
DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear13xx_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
*/
struct map_desc spear13xx_io_desc[] __initdata = {
{
- .virtual = VA_PERIP_GRP2_BASE,
+ .virtual = (unsigned long)VA_PERIP_GRP2_BASE,
.pfn = __phys_to_pfn(PERIP_GRP2_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_PERIP_GRP1_BASE,
+ .virtual = (unsigned long)VA_PERIP_GRP1_BASE,
.pfn = __phys_to_pfn(PERIP_GRP1_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_A9SM_AND_MPMC_BASE,
+ .virtual = (unsigned long)VA_A9SM_AND_MPMC_BASE,
.pfn = __phys_to_pfn(A9SM_AND_MPMC_BASE),
.length = SZ_16M,
.type = MT_DEVICE
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
+++ /dev/null
-/*
- * arch/arm/mach-spear3xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb
+++ /dev/null
-/*
- * arch/arm/mach-spear6xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
- select USE_OF
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
comment "Tegra board type"
-config MACH_HARMONY
- bool "Harmony board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for nVidia Harmony development platform
-
-config MACH_PAZ00
- bool "Paz00 board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for the Toshiba AC100/Dynabook AZ netbook
-
-config MACH_TRIMSLICE
- bool "TrimSlice board"
- depends on ARCH_TEGRA_2x_SOC
- select TEGRA_PCI
- help
- Support for CompuLab TrimSlice platform
-
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
endchoice
-config TEGRA_SYSTEM_DMA
- bool "Enable system DMA driver for NVIDIA Tegra SoCs"
- default y
- help
- Adds system DMA functionality for NVIDIA Tegra SoCs, used by
- several Tegra device drivers
-
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"
obj-y += apbio.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_IDLE) += sleep.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o
-obj-$(CONFIG_MACH_PAZ00) += board-paz00.o
-obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o
-
-obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o
-obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
#include "apbio.h"
-#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA)
+#if defined(CONFIG_TEGRA20_APB_DMA)
static DEFINE_MUTEX(tegra_apb_dma_lock);
static u32 *tegra_apb_bb;
static dma_addr_t tegra_apb_bb_phys;
static u32 tegra_apb_readl_direct(unsigned long offset);
static void tegra_apb_writel_direct(u32 value, unsigned long offset);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static struct tegra_dma_channel *tegra_apb_dma;
-
-bool tegra_apb_init(void)
-{
- struct tegra_dma_channel *ch;
-
- mutex_lock(&tegra_apb_dma_lock);
-
- /* Check to see if we raced to setup */
- if (tegra_apb_dma)
- goto out;
-
- ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
- TEGRA_DMA_SHARED);
-
- if (!ch)
- goto out_fail;
-
- tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
- &tegra_apb_bb_phys, GFP_KERNEL);
- if (!tegra_apb_bb) {
- pr_err("%s: can not allocate bounce buffer\n", __func__);
- tegra_dma_free_channel(ch);
- goto out_fail;
- }
-
- tegra_apb_dma = ch;
-out:
- mutex_unlock(&tegra_apb_dma_lock);
- return true;
-
-out_fail:
- mutex_unlock(&tegra_apb_dma_lock);
- return false;
-}
-
-static void apb_dma_complete(struct tegra_dma_req *req)
-{
- complete(&tegra_apb_wait);
-}
-
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
-{
- struct tegra_dma_req req;
- int ret;
-
- if (!tegra_apb_dma && !tegra_apb_init())
- return tegra_apb_readl_direct(offset);
-
- mutex_lock(&tegra_apb_dma_lock);
- req.complete = apb_dma_complete;
- req.to_memory = 1;
- req.dest_addr = tegra_apb_bb_phys;
- req.dest_bus_width = 32;
- req.dest_wrap = 1;
- req.source_addr = offset;
- req.source_bus_width = 32;
- req.source_wrap = 4;
- req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
- req.size = 4;
-
- INIT_COMPLETION(tegra_apb_wait);
-
- tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb read dma timed out")) {
- tegra_dma_dequeue_req(tegra_apb_dma, &req);
- *(u32 *)tegra_apb_bb = 0;
- }
-
- mutex_unlock(&tegra_apb_dma_lock);
- return *((u32 *)tegra_apb_bb);
-}
-
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
-{
- struct tegra_dma_req req;
- int ret;
-
- if (!tegra_apb_dma && !tegra_apb_init()) {
- tegra_apb_writel_direct(value, offset);
- return;
- }
-
- mutex_lock(&tegra_apb_dma_lock);
- *((u32 *)tegra_apb_bb) = value;
- req.complete = apb_dma_complete;
- req.to_memory = 0;
- req.dest_addr = offset;
- req.dest_wrap = 4;
- req.dest_bus_width = 32;
- req.source_addr = tegra_apb_bb_phys;
- req.source_bus_width = 32;
- req.source_wrap = 1;
- req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
- req.size = 4;
-
- INIT_COMPLETION(tegra_apb_wait);
-
- tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb write dma timed out"))
- tegra_dma_dequeue_req(tegra_apb_dma, &req);
-
- mutex_unlock(&tegra_apb_dma_lock);
-}
-
-#else
static struct dma_chan *tegra_apb_dma_chan;
static struct dma_slave_config dma_sconfig;
pr_err("error in writing offset 0x%08lx using dma\n", offset);
mutex_unlock(&tegra_apb_dma_lock);
}
-#endif
#else
#define tegra_apb_readl_using_dma tegra_apb_readl_direct
#define tegra_apb_writel_using_dma tegra_apb_writel_direct
static u32 tegra_apb_readl_direct(unsigned long offset)
{
- return readl(IO_TO_VIRT(offset));
+ return readl(IO_ADDRESS(offset));
}
static void tegra_apb_writel_direct(u32 value, unsigned long offset)
{
- writel(value, IO_TO_VIRT(offset));
+ writel(value, IO_ADDRESS(offset));
}
void tegra_apb_io_init(void)
#include <mach/irqs.h>
#include "board.h"
-#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
+#include "common.h"
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
+ { "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
tegra20_auxdata_lookup, NULL);
}
-#ifdef CONFIG_MACH_TRIMSLICE
static void __init trimslice_init(void)
{
+#ifdef CONFIG_TEGRA_PCI
int ret;
ret = tegra_pcie_init(true, true);
if (ret)
pr_err("tegra_pci_init() failed: %d\n", ret);
-}
#endif
+}
-#ifdef CONFIG_MACH_HARMONY
static void __init harmony_init(void)
{
+#ifdef CONFIG_TEGRA_PCI
int ret;
- ret = harmony_regulator_init();
- if (ret) {
- pr_err("harmony_regulator_init() failed: %d\n", ret);
- return;
- }
-
ret = harmony_pcie_init();
if (ret)
pr_err("harmony_pcie_init() failed: %d\n", ret);
-}
#endif
+}
-#ifdef CONFIG_MACH_PAZ00
static void __init paz00_init(void)
{
tegra_paz00_wifikill_init();
}
-#endif
static struct {
char *machine;
void (*init)(void);
} board_init_funcs[] = {
-#ifdef CONFIG_MACH_TRIMSLICE
{ "compulab,trimslice", trimslice_init },
-#endif
-#ifdef CONFIG_MACH_HARMONY
{ "nvidia,harmony", harmony_init },
-#endif
-#ifdef CONFIG_MACH_PAZ00
{ "compal,paz00", paz00_init },
-#endif
};
static void __init tegra_dt_init_late(void)
DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.map_io = tegra_map_common_io,
+ .smp = smp_ops(tegra_smp_ops),
.init_early = tegra20_init_early,
.init_irq = tegra_dt_init_irq,
.handle_irq = gic_handle_irq,
#include "board.h"
#include "clock.h"
+#include "common.h"
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
};
DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
+ .smp = smp_ops(tegra_smp_ops),
.map_io = tegra_map_common_io,
.init_early = tegra30_init_early,
.init_irq = tegra_dt_init_irq,
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/err.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <asm/mach-types.h>
#include "board.h"
-#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
int __init harmony_pcie_init(void)
{
+ struct device_node *np;
+ int en_vdd_1v05;
struct regulator *regulator = NULL;
int err;
- err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
- if (err)
+ np = of_find_node_by_path("/regulators/regulator@3");
+ if (!np) {
+ pr_err("%s: of_find_node_by_path failed\n", __func__);
+ return -ENODEV;
+ }
+
+ en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
+ if (en_vdd_1v05 < 0) {
+ pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
+ en_vdd_1v05);
+ return en_vdd_1v05;
+ }
+
+ err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
+ if (err) {
+ pr_err("%s: gpio_request failed: %d\n", __func__, err);
return err;
+ }
- gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(en_vdd_1v05, 1);
- regulator = regulator_get(NULL, "pex_clk");
- if (IS_ERR_OR_NULL(regulator))
+ regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
+ if (IS_ERR_OR_NULL(regulator)) {
+ pr_err("%s: regulator_get failed: %d\n", __func__,
+ (int)PTR_ERR(regulator));
goto err_reg;
+ }
regulator_enable(regulator);
err = tegra_pcie_init(true, true);
- if (err)
+ if (err) {
+ pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
goto err_pcie;
+ }
return 0;
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
+ gpio_free(en_vdd_1v05);
return err;
}
-static int __init harmony_pcie_initcall(void)
-{
- if (!machine_is_harmony())
- return 0;
-
- return harmony_pcie_init();
-}
-
-/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_initcall);
-
#endif
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-harmony-pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-harmony.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map harmony_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, driven),
- TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, tristate),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uarta", up, tristate),
- TEGRA_MAP_MUXCONF("irtx", "uarta", up, tristate),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", na, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate),
- TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, tristate),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("spib", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("uad", "irda", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = harmony_map,
- .map_count = ARRAY_SIZE(harmony_map),
-};
-
-void harmony_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 NVIDIA, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/tps6586x.h>
-#include <linux/of.h>
-#include <linux/of_i2c.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-
-#include "board-harmony.h"
-
-static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
- REGULATOR_SUPPLY("pex_clk", NULL),
-};
-
-static struct regulator_init_data ldo0_data = {
- .supply_regulator = "vdd_sm2",
- .constraints = {
- .name = "vdd_ldo0",
- .min_uV = 3300 * 1000,
- .max_uV = 3300 * 1000,
- .valid_modes_mask = (REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_STANDBY),
- .valid_ops_mask = (REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_VOLTAGE),
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
- .consumer_supplies = tps658621_ldo0_supply,
-};
-
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\
- static struct regulator_init_data _id##_data = { \
- .supply_regulator = _supply, \
- .constraints = { \
- .name = _name, \
- .min_uV = (_minmv)*1000, \
- .max_uV = (_maxmv)*1000, \
- .valid_modes_mask = (REGULATOR_MODE_NORMAL | \
- REGULATOR_MODE_STANDBY), \
- .valid_ops_mask = (REGULATOR_CHANGE_MODE | \
- REGULATOR_CHANGE_STATUS | \
- REGULATOR_CHANGE_VOLTAGE), \
- .always_on = _on, \
- }, \
- }
-
-HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1);
-
-#define TPS_REG(_id, _data) \
- { \
- .id = TPS6586X_ID_##_id, \
- .name = "tps6586x-regulator", \
- .platform_data = _data, \
- }
-
-static struct tps6586x_subdev_info tps_devs[] = {
- TPS_REG(SM_0, &sm0_data),
- TPS_REG(SM_1, &sm1_data),
- TPS_REG(SM_2, &sm2_data),
- TPS_REG(LDO_0, &ldo0_data),
- TPS_REG(LDO_1, &ldo1_data),
- TPS_REG(LDO_2, &ldo2_data),
- TPS_REG(LDO_3, &ldo3_data),
- TPS_REG(LDO_4, &ldo4_data),
- TPS_REG(LDO_5, &ldo5_data),
- TPS_REG(LDO_6, &ldo6_data),
- TPS_REG(LDO_7, &ldo7_data),
- TPS_REG(LDO_8, &ldo8_data),
- TPS_REG(LDO_9, &ldo9_data),
-};
-
-static struct tps6586x_platform_data tps_platform = {
- .irq_base = TEGRA_NR_IRQS,
- .num_subdevs = ARRAY_SIZE(tps_devs),
- .subdevs = tps_devs,
- .gpio_base = HARMONY_GPIO_TPS6586X(0),
-};
-
-static struct i2c_board_info __initdata harmony_regulators[] = {
- {
- I2C_BOARD_INFO("tps6586x", 0x34),
- .irq = INT_EXTERNAL_PMU,
- .platform_data = &tps_platform,
- },
-};
-
-int __init harmony_regulator_init(void)
-{
- regulator_register_always_on(0, "vdd_sys",
- NULL, 0, 5000000);
-
- if (machine_is_harmony()) {
- i2c_register_board_info(3, harmony_regulators, 1);
- } else { /* Harmony, booted using device tree */
- struct device_node *np;
- struct i2c_adapter *adapter;
-
- np = of_find_node_by_path("/i2c@7000d000");
- if (np == NULL) {
- pr_err("Could not find device_node for DVC I2C\n");
- return -ENODEV;
- }
-
- adapter = of_find_i2c_adapter_by_node(np);
- if (!adapter) {
- pr_err("Could not find i2c_adapter for DVC I2C\n");
- return -ENODEV;
- }
-
- i2c_new_device(adapter, harmony_regulators);
- }
-
- return 0;
-}
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-harmony.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <sound/wm8903.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/tegra_wm8903_pdata.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-
-static struct tegra_wm8903_platform_data harmony_audio_pdata = {
- .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
- .gpio_hp_det = TEGRA_GPIO_HP_DET,
- .gpio_hp_mute = -1,
- .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN,
- .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN,
-};
-
-static struct platform_device harmony_audio_device = {
- .name = "tegra-snd-wm8903",
- .id = 0,
- .dev = {
- .platform_data = &harmony_audio_pdata,
- },
-};
-
-static struct wm8903_platform_data harmony_wm8903_pdata = {
- .irq_active_low = 0,
- .micdet_cfg = 0,
- .micdet_delay = 100,
- .gpio_base = HARMONY_GPIO_WM8903(0),
- .gpio_cfg = {
- 0,
- 0,
- WM8903_GPIO_CONFIG_ZERO,
- 0,
- 0,
- },
-};
-
-static struct i2c_board_info __initdata wm8903_board_info = {
- I2C_BOARD_INFO("wm8903", 0x1a),
- .platform_data = &harmony_wm8903_pdata,
-};
-
-static void __init harmony_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
- platform_device_register(&tegra_i2c_device4);
-
- wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
- i2c_register_board_info(0, &wm8903_board_info, 1);
-}
-
-static struct platform_device *harmony_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device1,
- &tegra_sdhci_device2,
- &tegra_sdhci_device4,
- &tegra_ehci3_device,
- &tegra_i2s_device1,
- &tegra_das_device,
- &harmony_audio_device,
-};
-
-static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 2;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
- mi->bank[1].start = SZ_512M;
- mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
- /* name parent rate enabled */
- { "uartd", "pll_p", 216000000, true },
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { "usb3", "clk_m", 12000000, true },
- { NULL, NULL, 0, 0},
-};
-
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
- .cd_gpio = TEGRA_GPIO_SD2_CD,
- .wp_gpio = TEGRA_GPIO_SD2_WP,
- .power_gpio = TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TEGRA_GPIO_SD4_CD,
- .wp_gpio = TEGRA_GPIO_SD4_WP,
- .power_gpio = TEGRA_GPIO_SD4_POWER,
- .is_8bit = 1,
-};
-
-static void __init tegra_harmony_init(void)
-{
- tegra_clk_init_from_table(harmony_clk_init_table);
-
- harmony_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
- harmony_i2c_init();
- harmony_regulator_init();
-}
-
-MACHINE_START(HARMONY, "harmony")
- .atag_offset = 0x100,
- .fixup = tegra_harmony_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_harmony_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-harmony.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_HARMONY_H
-#define _MACH_TEGRA_BOARD_HARMONY_H
-
-#include <mach/gpio-tegra.h>
-
-#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
-#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6
-#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN HARMONY_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
-#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
-#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
-#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
-
-void harmony_pinmux_init(void);
-int harmony_regulator_init(void);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-paz00-pinmux.c
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-paz00.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map paz00_map[] = {
- TEGRA_MAP_MUXCONF("ata", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, driven),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "pllc_out1", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "rsvd1", up, tristate),
- TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "rsvd1", up, tristate),
- TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmc", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uarta", up, driven),
- TEGRA_MAP_MUXCONF("irtx", "uarta", up, driven),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "owr", up, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate),
- TEGRA_MAP_MUXCONF("sdc", "twc", up, tristate),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, tristate),
- TEGRA_MAP_MUXCONF("slxc", "spi4", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spi4", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spia", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spib", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, driven),
- TEGRA_MAP_MUXCONF("spid", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "rsvd4", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, driven),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uac", "rsvd4", none, driven),
- TEGRA_MAP_MUXCONF("uad", "spdif", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = paz00_map,
- .map_count = ARRAY_SIZE(paz00_map),
-};
-
-void paz00_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
*
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio_keys.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/rfkill-gpio.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
#include "board.h"
#include "board-paz00.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- /* serial port on JP1 */
- .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
- .mapbase = TEGRA_UARTA_BASE,
- .irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- /* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
- .mapbase = TEGRA_UARTC_BASE,
- .irq = INT_UARTC,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
.name = "wifi_rfkill",
},
};
-static struct gpio_led gpio_leds[] = {
- {
- .name = "wifi-led",
- .default_trigger = "rfkill0",
- .gpio = TEGRA_WIFI_LED,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = TEGRA_GPIO_POWERKEY,
- .active_low = 1,
- .desc = "Power",
- .type = EV_KEY,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data paz00_gpio_keys = {
- .buttons = paz00_gpio_keys_buttons,
- .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &paz00_gpio_keys,
- },
-};
-
-static struct platform_device *paz00_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device4,
- &tegra_sdhci_device1,
- &leds_gpio,
- &gpio_keys_device,
-};
-
-static void paz00_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device4);
-}
-
-static void paz00_usb_init(void)
-{
- tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
-
- platform_device_register(&tegra_ehci2_device);
- platform_device_register(&tegra_ehci3_device);
-}
-
-static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
-}
-
-static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
- /* name parent rate enabled */
- { "uarta", "pll_p", 216000000, true },
- { "uartc", "pll_p", 216000000, true },
-
- { "usbd", "clk_m", 12000000, false },
- { "usb2", "clk_m", 12000000, false },
- { "usb3", "clk_m", 12000000, false },
-
- { NULL, NULL, 0, 0},
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = TEGRA_GPIO_SD1_CD,
- .wp_gpio = TEGRA_GPIO_SD1_WP,
- .power_gpio = TEGRA_GPIO_SD1_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
- .is_8bit = 1,
-};
-
void __init tegra_paz00_wifikill_init(void)
{
platform_device_register(&wifi_rfkill_device);
}
-
-static void __init tegra_paz00_init(void)
-{
- tegra_clk_init_from_table(paz00_clk_init_table);
-
- paz00_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
- tegra_paz00_wifikill_init();
-
- paz00_i2c_init();
- paz00_usb_init();
-}
-
-MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .atag_offset = 0x100,
- .fixup = tegra_paz00_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_paz00_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
-#include <mach/gpio-tegra.h>
+#include "gpio-names.h"
-/* SDCARD */
-#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
-
-/* ULPI */
-#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
-
-/* WIFI */
#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
-#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
-
-/* WakeUp */
-#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7
-
-void paz00_pinmux_init(void);
#endif
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-trimslice-pinmux.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/kernel.h>
-
-#include "board-trimslice.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map trimslice_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, tristate),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, tristate),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtb", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtc", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dte", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", up, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "nand", none, tristate),
- TEGRA_MAP_MUXCONF("gmc", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("gme", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("gpu", "uarta", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, tristate),
- TEGRA_MAP_MUXCONF("irrx", "uartb", up, tristate),
- TEGRA_MAP_MUXCONF("irtx", "uartb", up, tristate),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", up, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, tristate),
- TEGRA_MAP_MUXCONF("pta", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("rm", "i2c1", up, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, driven),
- TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("slxc", "sdio3", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "sdio3", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "spi2", down, tristate),
- TEGRA_MAP_MUXCONF("spib", "spi2", down, tristate),
- TEGRA_MAP_MUXCONF("spic", "spi2", up, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("uad", "irda", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = trimslice_map,
- .map_count = ARRAY_SIZE(trimslice_map),
-};
-
-void trimslice_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-trimslice.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-#include "board-trimslice.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
- .mapbase = TEGRA_UARTA_BASE,
- .irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TRIMSLICE_GPIO_SD4_CD,
- .wp_gpio = TRIMSLICE_GPIO_SD4_WP,
- .power_gpio = -1,
-};
-
-static struct platform_device trimslice_audio_device = {
- .name = "tegra-snd-trimslice",
- .id = 0,
-};
-
-static struct platform_device *trimslice_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device1,
- &tegra_sdhci_device4,
- &tegra_i2s_device1,
- &tegra_das_device,
- &trimslice_audio_device,
-};
-
-static struct i2c_board_info trimslice_i2c3_board_info[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
- {
- I2C_BOARD_INFO("em3027", 0x56),
- },
-};
-
-static void trimslice_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
-
- i2c_register_board_info(2, trimslice_i2c3_board_info,
- ARRAY_SIZE(trimslice_i2c3_board_info));
-}
-
-static void trimslice_usb_init(void)
-{
- struct tegra_ehci_platform_data *pdata;
-
- pdata = tegra_ehci1_device.dev.platform_data;
- pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
-
- tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
-
- platform_device_register(&tegra_ehci3_device);
- platform_device_register(&tegra_ehci2_device);
- platform_device_register(&tegra_ehci1_device);
-}
-
-static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 2;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
- mi->bank[1].start = SZ_512M;
- mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
- /* name parent rate enabled */
- { "uarta", "pll_p", 216000000, true },
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { NULL, NULL, 0, 0},
-};
-
-static int __init tegra_trimslice_pci_init(void)
-{
- if (!machine_is_trimslice())
- return 0;
-
- return tegra_pcie_init(true, true);
-}
-subsys_initcall(tegra_trimslice_pci_init);
-
-static void __init tegra_trimslice_init(void)
-{
- tegra_clk_init_from_table(trimslice_clk_init_table);
-
- trimslice_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
-
- trimslice_i2c_init();
- trimslice_usb_init();
-}
-
-MACHINE_START(TRIMSLICE, "trimslice")
- .atag_offset = 0x100,
- .fixup = tegra_trimslice_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_trimslice_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-trimslice.h
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
-#define _MACH_TEGRA_BOARD_TRIMSLICE_H
-
-#include <mach/gpio-tegra.h>
-
-#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
-#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
-
-#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */
-#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */
-
-void trimslice_pinmux_init(void);
-
-#endif
/*
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include "board.h"
#include "clock.h"
+#include "tegra_cpu_car.h"
+
+/* Global data of Tegra CPU CAR ops */
+struct tegra_cpu_car_ops *tegra_cpu_car_ops;
/*
* Locking:
*
- * Each struct clk has a spinlock.
- *
- * To avoid AB-BA locking problems, locks must always be traversed from child
- * clock to parent clock. For example, when enabling a clock, the clock's lock
- * is taken, and then clk_enable is called on the parent, which take's the
- * parent clock's lock. There is one exceptions to this ordering: When dumping
- * the clock tree through debugfs. In this case, clk_lock_all is called,
- * which attemps to iterate through the entire list of clocks and take every
- * clock lock. If any call to spin_trylock fails, all locked clocks are
- * unlocked, and the process is retried. When all the locks are held,
- * the only clock operation that can be called is clk_get_rate_all_locked.
- *
- * Within a single clock, no clock operation can call another clock operation
- * on itself, except for clk_get_rate_locked and clk_set_rate_locked. Any
- * clock operation can call any other clock operation on any of it's possible
- * parents.
- *
* An additional mutex, clock_list_lock, is used to protect the list of all
* clocks.
*
- * The clock operations must lock internally to protect against
- * read-modify-write on registers that are shared by multiple clocks
*/
static DEFINE_MUTEX(clock_list_lock);
static LIST_HEAD(clocks);
-struct clk *tegra_get_clock_by_name(const char *name)
-{
- struct clk *c;
- struct clk *ret = NULL;
- mutex_lock(&clock_list_lock);
- list_for_each_entry(c, &clocks, node) {
- if (strcmp(c->name, name) == 0) {
- ret = c;
- break;
- }
- }
- mutex_unlock(&clock_list_lock);
- return ret;
-}
-
-/* Must be called with c->spinlock held */
-static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p)
-{
- u64 rate;
-
- rate = clk_get_rate(p);
-
- if (c->mul != 0 && c->div != 0) {
- rate *= c->mul;
- rate += c->div - 1; /* round up */
- do_div(rate, c->div);
- }
-
- return rate;
-}
-
-/* Must be called with c->spinlock held */
-unsigned long clk_get_rate_locked(struct clk *c)
-{
- unsigned long rate;
-
- if (c->parent)
- rate = clk_predict_rate_from_parent(c, c->parent);
- else
- rate = c->rate;
-
- return rate;
-}
-
-unsigned long clk_get_rate(struct clk *c)
+void tegra_clk_add(struct clk *clk)
{
- unsigned long flags;
- unsigned long rate;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- rate = clk_get_rate_locked(c);
-
- spin_unlock_irqrestore(&c->spinlock, flags);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_reparent(struct clk *c, struct clk *parent)
-{
- c->parent = parent;
- return 0;
-}
-
-void clk_init(struct clk *c)
-{
- spin_lock_init(&c->spinlock);
-
- if (c->ops && c->ops->init)
- c->ops->init(c);
-
- if (!c->ops || !c->ops->enable) {
- c->refcnt++;
- c->set = true;
- if (c->parent)
- c->state = c->parent->state;
- else
- c->state = ON;
- }
+ struct clk_tegra *c = to_clk_tegra(__clk_get_hw(clk));
mutex_lock(&clock_list_lock);
list_add(&c->node, &clocks);
mutex_unlock(&clock_list_lock);
}
-int clk_enable(struct clk *c)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- if (c->refcnt == 0) {
- if (c->parent) {
- ret = clk_enable(c->parent);
- if (ret)
- goto out;
- }
-
- if (c->ops && c->ops->enable) {
- ret = c->ops->enable(c);
- if (ret) {
- if (c->parent)
- clk_disable(c->parent);
- goto out;
- }
- c->state = ON;
- c->set = true;
- }
- }
- c->refcnt++;
-out:
- spin_unlock_irqrestore(&c->spinlock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *c)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- if (c->refcnt == 0) {
- WARN(1, "Attempting to disable clock %s with refcnt 0", c->name);
- spin_unlock_irqrestore(&c->spinlock, flags);
- return;
- }
- if (c->refcnt == 1) {
- if (c->ops && c->ops->disable)
- c->ops->disable(c);
-
- if (c->parent)
- clk_disable(c->parent);
-
- c->state = OFF;
- }
- c->refcnt--;
-
- spin_unlock_irqrestore(&c->spinlock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_set_parent(struct clk *c, struct clk *parent)
-{
- int ret;
- unsigned long flags;
- unsigned long new_rate;
- unsigned long old_rate;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- if (!c->ops || !c->ops->set_parent) {
- ret = -ENOSYS;
- goto out;
- }
-
- new_rate = clk_predict_rate_from_parent(c, parent);
- old_rate = clk_get_rate_locked(c);
-
- ret = c->ops->set_parent(c, parent);
- if (ret)
- goto out;
-
-out:
- spin_unlock_irqrestore(&c->spinlock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *c)
-{
- return c->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_rate_locked(struct clk *c, unsigned long rate)
-{
- long new_rate;
-
- if (!c->ops || !c->ops->set_rate)
- return -ENOSYS;
-
- if (rate > c->max_rate)
- rate = c->max_rate;
-
- if (c->ops && c->ops->round_rate) {
- new_rate = c->ops->round_rate(c, rate);
-
- if (new_rate < 0)
- return new_rate;
-
- rate = new_rate;
- }
-
- return c->ops->set_rate(c, rate);
-}
-
-int clk_set_rate(struct clk *c, unsigned long rate)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- ret = clk_set_rate_locked(c, rate);
-
- spin_unlock_irqrestore(&c->spinlock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-
-/* Must be called with clocks lock and all indvidual clock locks held */
-unsigned long clk_get_rate_all_locked(struct clk *c)
+struct clk *tegra_get_clock_by_name(const char *name)
{
- u64 rate;
- int mul = 1;
- int div = 1;
- struct clk *p = c;
-
- while (p) {
- c = p;
- if (c->mul != 0 && c->div != 0) {
- mul *= c->mul;
- div *= c->div;
+ struct clk_tegra *c;
+ struct clk *ret = NULL;
+ mutex_lock(&clock_list_lock);
+ list_for_each_entry(c, &clocks, node) {
+ if (strcmp(__clk_get_name(c->hw.clk), name) == 0) {
+ ret = c->hw.clk;
+ break;
}
- p = c->parent;
- }
-
- rate = c->rate;
- rate *= mul;
- do_div(rate, div);
-
- return rate;
-}
-
-long clk_round_rate(struct clk *c, unsigned long rate)
-{
- unsigned long flags;
- long ret;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- if (!c->ops || !c->ops->round_rate) {
- ret = -ENOSYS;
- goto out;
}
-
- if (rate > c->max_rate)
- rate = c->max_rate;
-
- ret = c->ops->round_rate(c, rate);
-
-out:
- spin_unlock_irqrestore(&c->spinlock, flags);
+ mutex_unlock(&clock_list_lock);
return ret;
}
-EXPORT_SYMBOL(clk_round_rate);
static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
{
struct clk *c;
struct clk *p;
+ struct clk *parent;
int ret = 0;
c = tegra_get_clock_by_name(table->name);
if (!c) {
- pr_warning("Unable to initialize clock %s\n",
+ pr_warn("Unable to initialize clock %s\n",
table->name);
return -ENODEV;
}
+ parent = clk_get_parent(c);
+
if (table->parent) {
p = tegra_get_clock_by_name(table->parent);
if (!p) {
- pr_warning("Unable to find parent %s of clock %s\n",
+ pr_warn("Unable to find parent %s of clock %s\n",
table->parent, table->name);
return -ENODEV;
}
- if (c->parent != p) {
+ if (parent != p) {
ret = clk_set_parent(c, p);
if (ret) {
- pr_warning("Unable to set parent %s of clock %s: %d\n",
+ pr_warn("Unable to set parent %s of clock %s: %d\n",
table->parent, table->name, ret);
return -EINVAL;
}
if (table->rate && table->rate != clk_get_rate(c)) {
ret = clk_set_rate(c, table->rate);
if (ret) {
- pr_warning("Unable to set clock %s to rate %lu: %d\n",
+ pr_warn("Unable to set clock %s to rate %lu: %d\n",
table->name, table->rate, ret);
return -EINVAL;
}
}
if (table->enabled) {
- ret = clk_enable(c);
+ ret = clk_prepare_enable(c);
if (ret) {
- pr_warning("Unable to enable clock %s: %d\n",
+ pr_warn("Unable to enable clock %s: %d\n",
table->name, ret);
return -EINVAL;
}
for (; table->name; table++)
tegra_clk_init_one_from_table(table);
}
-EXPORT_SYMBOL(tegra_clk_init_from_table);
void tegra_periph_reset_deassert(struct clk *c)
{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, false);
+ struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
+ BUG_ON(!clk->reset);
+ clk->reset(__clk_get_hw(c), false);
}
EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, true);
+ struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
+ BUG_ON(!clk->reset);
+ clk->reset(__clk_get_hw(c), true);
}
EXPORT_SYMBOL(tegra_periph_reset_assert);
int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
{
int ret = 0;
- unsigned long flags;
+ struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
- spin_lock_irqsave(&c->spinlock, flags);
-
- if (!c->ops || !c->ops->clk_cfg_ex) {
+ if (!clk->clk_cfg_ex) {
ret = -ENOSYS;
goto out;
}
- ret = c->ops->clk_cfg_ex(c, p, setting);
+ ret = clk->clk_cfg_ex(__clk_get_hw(c), p, setting);
out:
- spin_unlock_irqrestore(&c->spinlock, flags);
-
return ret;
}
-
-#ifdef CONFIG_DEBUG_FS
-
-static int __clk_lock_all_spinlocks(void)
-{
- struct clk *c;
-
- list_for_each_entry(c, &clocks, node)
- if (!spin_trylock(&c->spinlock))
- goto unlock_spinlocks;
-
- return 0;
-
-unlock_spinlocks:
- list_for_each_entry_continue_reverse(c, &clocks, node)
- spin_unlock(&c->spinlock);
-
- return -EAGAIN;
-}
-
-static void __clk_unlock_all_spinlocks(void)
-{
- struct clk *c;
-
- list_for_each_entry_reverse(c, &clocks, node)
- spin_unlock(&c->spinlock);
-}
-
-/*
- * This function retries until it can take all locks, and may take
- * an arbitrarily long time to complete.
- * Must be called with irqs enabled, returns with irqs disabled
- * Must be called with clock_list_lock held
- */
-static void clk_lock_all(void)
-{
- int ret;
-retry:
- local_irq_disable();
-
- ret = __clk_lock_all_spinlocks();
- if (ret)
- goto failed_spinlocks;
-
- /* All locks taken successfully, return */
- return;
-
-failed_spinlocks:
- local_irq_enable();
- yield();
- goto retry;
-}
-
-/*
- * Unlocks all clocks after a clk_lock_all
- * Must be called with irqs disabled, returns with irqs enabled
- * Must be called with clock_list_lock held
- */
-static void clk_unlock_all(void)
-{
- __clk_unlock_all_spinlocks();
-
- local_irq_enable();
-}
-
-static struct dentry *clk_debugfs_root;
-
-
-static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
-{
- struct clk *child;
- const char *state = "uninit";
- char div[8] = {0};
-
- if (c->state == ON)
- state = "on";
- else if (c->state == OFF)
- state = "off";
-
- if (c->mul != 0 && c->div != 0) {
- if (c->mul > c->div) {
- int mul = c->mul / c->div;
- int mul2 = (c->mul * 10 / c->div) % 10;
- int mul3 = (c->mul * 10) % c->div;
- if (mul2 == 0 && mul3 == 0)
- snprintf(div, sizeof(div), "x%d", mul);
- else if (mul3 == 0)
- snprintf(div, sizeof(div), "x%d.%d", mul, mul2);
- else
- snprintf(div, sizeof(div), "x%d.%d..", mul, mul2);
- } else {
- snprintf(div, sizeof(div), "%d%s", c->div / c->mul,
- (c->div % c->mul) ? ".5" : "");
- }
- }
-
- seq_printf(s, "%*s%c%c%-*s %-6s %-3d %-8s %-10lu\n",
- level * 3 + 1, "",
- c->rate > c->max_rate ? '!' : ' ',
- !c->set ? '*' : ' ',
- 30 - level * 3, c->name,
- state, c->refcnt, div, clk_get_rate_all_locked(c));
-
- list_for_each_entry(child, &clocks, node) {
- if (child->parent != c)
- continue;
-
- clock_tree_show_one(s, child, level + 1);
- }
-}
-
-static int clock_tree_show(struct seq_file *s, void *data)
-{
- struct clk *c;
- seq_printf(s, " clock state ref div rate\n");
- seq_printf(s, "--------------------------------------------------------------\n");
-
- mutex_lock(&clock_list_lock);
-
- clk_lock_all();
-
- list_for_each_entry(c, &clocks, node)
- if (c->parent == NULL)
- clock_tree_show_one(s, c, 0);
-
- clk_unlock_all();
-
- mutex_unlock(&clock_list_lock);
- return 0;
-}
-
-static int clock_tree_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clock_tree_show, inode->i_private);
-}
-
-static const struct file_operations clock_tree_fops = {
- .open = clock_tree_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int possible_parents_show(struct seq_file *s, void *data)
-{
- struct clk *c = s->private;
- int i;
-
- for (i = 0; c->inputs[i].input; i++) {
- char *first = (i == 0) ? "" : " ";
- seq_printf(s, "%s%s", first, c->inputs[i].input->name);
- }
- seq_printf(s, "\n");
- return 0;
-}
-
-static int possible_parents_open(struct inode *inode, struct file *file)
-{
- return single_open(file, possible_parents_show, inode->i_private);
-}
-
-static const struct file_operations possible_parents_fops = {
- .open = possible_parents_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- struct dentry *d;
-
- d = debugfs_create_dir(c->name, clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u8("refcnt", S_IRUGO, c->dent, (u8 *)&c->refcnt);
- if (!d)
- goto err_out;
-
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d)
- goto err_out;
-
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d)
- goto err_out;
-
- if (c->inputs) {
- d = debugfs_create_file("possible_parents", S_IRUGO, c->dent,
- c, &possible_parents_fops);
- if (!d)
- goto err_out;
- }
-
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return -ENOMEM;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-int __init tegra_clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err = -ENOMEM;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
- &clock_tree_fops);
- if (!d)
- goto err_out;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-
-#endif
* arch/arm/mach-tegra/include/mach/clock.h
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
#ifndef __MACH_TEGRA_CLOCK_H
#define __MACH_TEGRA_CLOCK_H
+#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/list.h>
-#include <linux/spinlock.h>
#include <mach/clk.h>
#define ENABLE_ON_INIT (1 << 28)
#define PERIPH_ON_APB (1 << 29)
-struct clk;
+struct clk_tegra;
+#define to_clk_tegra(_hw) container_of(_hw, struct clk_tegra, hw)
struct clk_mux_sel {
struct clk *input;
u8 cpcon;
};
-struct clk_ops {
- void (*init)(struct clk *);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
- int (*set_parent)(struct clk *, struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*reset)(struct clk *, bool);
- int (*clk_cfg_ex)(struct clk *,
- enum tegra_clk_ex_param, u32);
-};
-
enum clk_state {
UNINITIALIZED = 0,
ON,
OFF,
};
-struct clk {
+struct clk_tegra {
/* node for master clocks list */
- struct list_head node; /* node for list of all clocks */
+ struct list_head node; /* node for list of all clocks */
struct clk_lookup lookup;
+ struct clk_hw hw;
-#ifdef CONFIG_DEBUG_FS
- struct dentry *dent;
-#endif
bool set;
- struct clk_ops *ops;
- unsigned long rate;
+ unsigned long fixed_rate;
unsigned long max_rate;
unsigned long min_rate;
u32 flags;
const char *name;
- u32 refcnt;
enum clk_state state;
- struct clk *parent;
u32 div;
u32 mul;
- const struct clk_mux_sel *inputs;
u32 reg;
u32 reg_shift;
} shared_bus_user;
} u;
- spinlock_t spinlock;
+ void (*reset)(struct clk_hw *, bool);
+ int (*clk_cfg_ex)(struct clk_hw *, enum tegra_clk_ex_param, u32);
};
struct clk_duplicate {
bool enabled;
};
+void tegra_clk_add(struct clk *c);
void tegra2_init_clocks(void);
void tegra30_init_clocks(void);
-void clk_init(struct clk *clk);
struct clk *tegra_get_clock_by_name(const char *name);
-int clk_reparent(struct clk *c, struct clk *parent);
void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
-unsigned long clk_get_rate_locked(struct clk *c);
-int clk_set_rate_locked(struct clk *c, unsigned long rate);
#endif
#include "board.h"
#include "clock.h"
+#include "common.h"
#include "fuse.h"
#include "pmc.h"
#include "apbio.h"
+#include "sleep.h"
/*
* Storage for debug-macro.S's state.
tegra_init_cache(0x331, 0x441);
tegra_pmc_init();
tegra_powergate_init();
+ tegra20_hotplug_init();
}
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
tegra_init_cache(0x441, 0x551);
tegra_pmc_init();
tegra_powergate_init();
+ tegra30_hotplug_init();
}
#endif
void __init tegra_init_late(void)
{
- tegra_clk_debugfs_init();
tegra_powergate_debugfs_init();
}
--- /dev/null
+extern struct smp_operations tegra_smp_ops;
+
+extern void tegra_cpu_die(unsigned int cpu);
+extern int tegra_cpu_disable(unsigned int cpu);
#define NUM_CPUS 2
static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
static struct clk *emc_clk;
static unsigned long target_cpu_speed[NUM_CPUS];
return rate;
}
+static int tegra_cpu_clk_set_rate(unsigned long rate)
+{
+ int ret;
+
+ /*
+ * Take an extra reference to the main pll so it doesn't turn
+ * off when we move the cpu off of it
+ */
+ clk_prepare_enable(pll_x_clk);
+
+ ret = clk_set_parent(cpu_clk, pll_p_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_p\n");
+ goto out;
+ }
+
+ if (rate == clk_get_rate(pll_p_clk))
+ goto out;
+
+ ret = clk_set_rate(pll_x_clk, rate);
+ if (ret) {
+ pr_err("Failed to change pll_x to %lu\n", rate);
+ goto out;
+ }
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_x\n");
+ goto out;
+ }
+
+out:
+ clk_disable_unprepare(pll_x_clk);
+ return ret;
+}
+
static int tegra_update_cpu_speed(unsigned long rate)
{
int ret = 0;
freqs.old, freqs.new);
#endif
- ret = clk_set_rate(cpu_clk, freqs.new * 1000);
+ ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
if (ret) {
pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
freqs.new);
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
+ pll_x_clk = clk_get_sys(NULL, "pll_x");
+ if (IS_ERR(pll_x_clk))
+ return PTR_ERR(pll_x_clk);
+
+ pll_p_clk = clk_get_sys(NULL, "pll_p");
+ if (IS_ERR(pll_p_clk))
+ return PTR_ERR(pll_p_clk);
+
emc_clk = clk_get_sys("cpu", "emc");
if (IS_ERR(emc_clk)) {
clk_put(cpu_clk);
#include <linux/fsl_devices.h>
#include <linux/serial_8250.h>
#include <linux/i2c-tegra.h>
-#include <asm/pmu.h>
#include <mach/irqs.h>
#include <mach/iomap.h>
#include <mach/dma.h>
struct platform_device tegra_pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(tegra_pmu_resources),
.resource = tegra_pmu_resources,
};
+++ /dev/null
-/*
- * arch/arm/mach-tegra/dma.c
- *
- * System DMA driver for NVIDIA Tegra SoCs
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "apbio.h"
-
-#define APB_DMA_GEN 0x000
-#define GEN_ENABLE (1<<31)
-
-#define APB_DMA_CNTRL 0x010
-
-#define APB_DMA_IRQ_MASK 0x01c
-
-#define APB_DMA_IRQ_MASK_SET 0x020
-
-#define APB_DMA_CHAN_CSR 0x000
-#define CSR_ENB (1<<31)
-#define CSR_IE_EOC (1<<30)
-#define CSR_HOLD (1<<29)
-#define CSR_DIR (1<<28)
-#define CSR_ONCE (1<<27)
-#define CSR_FLOW (1<<21)
-#define CSR_REQ_SEL_SHIFT 16
-#define CSR_WCOUNT_SHIFT 2
-#define CSR_WCOUNT_MASK 0xFFFC
-
-#define APB_DMA_CHAN_STA 0x004
-#define STA_BUSY (1<<31)
-#define STA_ISE_EOC (1<<30)
-#define STA_HALT (1<<29)
-#define STA_PING_PONG (1<<28)
-#define STA_COUNT_SHIFT 2
-#define STA_COUNT_MASK 0xFFFC
-
-#define APB_DMA_CHAN_AHB_PTR 0x010
-
-#define APB_DMA_CHAN_AHB_SEQ 0x014
-#define AHB_SEQ_INTR_ENB (1<<31)
-#define AHB_SEQ_BUS_WIDTH_SHIFT 28
-#define AHB_SEQ_BUS_WIDTH_MASK (0x7<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_8 (0<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_16 (1<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_32 (2<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_64 (3<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_128 (4<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_DATA_SWAP (1<<27)
-#define AHB_SEQ_BURST_MASK (0x7<<24)
-#define AHB_SEQ_BURST_1 (4<<24)
-#define AHB_SEQ_BURST_4 (5<<24)
-#define AHB_SEQ_BURST_8 (6<<24)
-#define AHB_SEQ_DBL_BUF (1<<19)
-#define AHB_SEQ_WRAP_SHIFT 16
-#define AHB_SEQ_WRAP_MASK (0x7<<AHB_SEQ_WRAP_SHIFT)
-
-#define APB_DMA_CHAN_APB_PTR 0x018
-
-#define APB_DMA_CHAN_APB_SEQ 0x01c
-#define APB_SEQ_BUS_WIDTH_SHIFT 28
-#define APB_SEQ_BUS_WIDTH_MASK (0x7<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_8 (0<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_16 (1<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_32 (2<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_64 (3<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_128 (4<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_DATA_SWAP (1<<27)
-#define APB_SEQ_WRAP_SHIFT 16
-#define APB_SEQ_WRAP_MASK (0x7<<APB_SEQ_WRAP_SHIFT)
-
-#define TEGRA_SYSTEM_DMA_CH_NR 16
-#define TEGRA_SYSTEM_DMA_AVP_CH_NUM 4
-#define TEGRA_SYSTEM_DMA_CH_MIN 0
-#define TEGRA_SYSTEM_DMA_CH_MAX \
- (TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1)
-
-#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-
-static const unsigned int ahb_addr_wrap_table[8] = {
- 0, 32, 64, 128, 256, 512, 1024, 2048
-};
-
-static const unsigned int apb_addr_wrap_table[8] = {
- 0, 1, 2, 4, 8, 16, 32, 64
-};
-
-static const unsigned int bus_width_table[5] = {
- 8, 16, 32, 64, 128
-};
-
-#define TEGRA_DMA_NAME_SIZE 16
-struct tegra_dma_channel {
- struct list_head list;
- int id;
- spinlock_t lock;
- char name[TEGRA_DMA_NAME_SIZE];
- void __iomem *addr;
- int mode;
- int irq;
- int req_transfer_count;
-};
-
-#define NV_DMA_MAX_CHANNELS 32
-
-static bool tegra_dma_initialized;
-static DEFINE_MUTEX(tegra_dma_lock);
-static DEFINE_SPINLOCK(enable_lock);
-
-static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
-static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-static void tegra_dma_stop(struct tegra_dma_channel *ch);
-
-void tegra_dma_flush(struct tegra_dma_channel *ch)
-{
-}
-EXPORT_SYMBOL(tegra_dma_flush);
-
-void tegra_dma_dequeue(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
-
- if (tegra_dma_is_empty(ch))
- return;
-
- req = list_entry(ch->list.next, typeof(*req), node);
-
- tegra_dma_dequeue_req(ch, req);
- return;
-}
-
-static void tegra_dma_stop(struct tegra_dma_channel *ch)
-{
- u32 csr;
- u32 status;
-
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_IE_EOC;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- csr &= ~CSR_ENB;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- if (status & STA_ISE_EOC)
- writel(status, ch->addr + APB_DMA_CHAN_STA);
-}
-
-static int tegra_dma_cancel(struct tegra_dma_channel *ch)
-{
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- while (!list_empty(&ch->list))
- list_del(ch->list.next);
-
- tegra_dma_stop(ch);
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return 0;
-}
-
-static unsigned int get_channel_status(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req, bool is_stop_dma)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- unsigned int status;
-
- if (is_stop_dma) {
- /*
- * STOP the DMA and get the transfer count.
- * Getting the transfer count is tricky.
- * - Globally disable DMA on all channels
- * - Read the channel's status register to know the number
- * of pending bytes to be transfered.
- * - Stop the dma channel
- * - Globally re-enable DMA to resume other transfers
- */
- spin_lock(&enable_lock);
- writel(0, addr + APB_DMA_GEN);
- udelay(20);
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- tegra_dma_stop(ch);
- writel(GEN_ENABLE, addr + APB_DMA_GEN);
- spin_unlock(&enable_lock);
- if (status & STA_ISE_EOC) {
- pr_err("Got Dma Int here clearing");
- writel(status, ch->addr + APB_DMA_CHAN_STA);
- }
- req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
- } else {
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- }
- return status;
-}
-
-/* should be called with the channel lock held */
-static unsigned int dma_active_count(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req, unsigned int status)
-{
- unsigned int to_transfer;
- unsigned int req_transfer_count;
- unsigned int bytes_transferred;
-
- to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
- req_transfer_count = ch->req_transfer_count + 1;
- bytes_transferred = req_transfer_count;
- if (status & STA_BUSY)
- bytes_transferred -= to_transfer;
- /*
- * In continuous transfer mode, DMA only tracks the count of the
- * half DMA buffer. So, if the DMA already finished half the DMA
- * then add the half buffer to the completed count.
- */
- if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
- bytes_transferred += req_transfer_count;
- if (status & STA_ISE_EOC)
- bytes_transferred += req_transfer_count;
- }
- bytes_transferred *= 4;
- return bytes_transferred;
-}
-
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *_req)
-{
- unsigned int status;
- struct tegra_dma_req *req = NULL;
- int found = 0;
- unsigned long irq_flags;
- int stop = 0;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
-
- if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
- stop = 1;
-
- list_for_each_entry(req, &ch->list, node) {
- if (req == _req) {
- list_del(&req->node);
- found = 1;
- break;
- }
- }
- if (!found) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return 0;
- }
-
- if (!stop)
- goto skip_stop_dma;
-
- status = get_channel_status(ch, req, true);
- req->bytes_transferred = dma_active_count(ch, req, status);
-
- if (!list_empty(&ch->list)) {
- /* if the list is not empty, queue the next request */
- struct tegra_dma_req *next_req;
- next_req = list_entry(ch->list.next,
- typeof(*next_req), node);
- tegra_dma_update_hw(ch, next_req);
- }
-
-skip_stop_dma:
- req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-
- /* Callback should be called without any lock */
- req->complete(req);
- return 0;
-}
-EXPORT_SYMBOL(tegra_dma_dequeue_req);
-
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch)
-{
- unsigned long irq_flags;
- bool is_empty;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list))
- is_empty = true;
- else
- is_empty = false;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return is_empty;
-}
-EXPORT_SYMBOL(tegra_dma_is_empty);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
- struct tegra_dma_req *_req)
-{
- unsigned long irq_flags;
- struct tegra_dma_req *req;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- list_for_each_entry(req, &ch->list, node) {
- if (req == _req) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return true;
- }
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return false;
-}
-EXPORT_SYMBOL(tegra_dma_is_req_inflight);
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- unsigned long irq_flags;
- struct tegra_dma_req *_req;
- int start_dma = 0;
-
- if (req->size > NV_DMA_MAX_TRASFER_SIZE ||
- req->source_addr & 0x3 || req->dest_addr & 0x3) {
- pr_err("Invalid DMA request for channel %d\n", ch->id);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&ch->lock, irq_flags);
-
- list_for_each_entry(_req, &ch->list, node) {
- if (req == _req) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return -EEXIST;
- }
- }
-
- req->bytes_transferred = 0;
- req->status = 0;
- req->buffer_status = 0;
- if (list_empty(&ch->list))
- start_dma = 1;
-
- list_add_tail(&req->node, &ch->list);
-
- if (start_dma)
- tegra_dma_update_hw(ch, req);
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-
- return 0;
-}
-EXPORT_SYMBOL(tegra_dma_enqueue_req);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
-{
- int channel;
- struct tegra_dma_channel *ch = NULL;
-
- if (!tegra_dma_initialized)
- return NULL;
-
- mutex_lock(&tegra_dma_lock);
-
- /* first channel is the shared channel */
- if (mode & TEGRA_DMA_SHARED) {
- channel = TEGRA_SYSTEM_DMA_CH_MIN;
- } else {
- channel = find_first_zero_bit(channel_usage,
- ARRAY_SIZE(dma_channels));
- if (channel >= ARRAY_SIZE(dma_channels))
- goto out;
- }
- __set_bit(channel, channel_usage);
- ch = &dma_channels[channel];
- ch->mode = mode;
-
-out:
- mutex_unlock(&tegra_dma_lock);
- return ch;
-}
-EXPORT_SYMBOL(tegra_dma_allocate_channel);
-
-void tegra_dma_free_channel(struct tegra_dma_channel *ch)
-{
- if (ch->mode & TEGRA_DMA_SHARED)
- return;
- tegra_dma_cancel(ch);
- mutex_lock(&tegra_dma_lock);
- __clear_bit(ch->id, channel_usage);
- mutex_unlock(&tegra_dma_lock);
-}
-EXPORT_SYMBOL(tegra_dma_free_channel);
-
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- u32 apb_ptr;
- u32 ahb_ptr;
-
- if (req->to_memory) {
- apb_ptr = req->source_addr;
- ahb_ptr = req->dest_addr;
- } else {
- apb_ptr = req->dest_addr;
- ahb_ptr = req->source_addr;
- }
- writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
- writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
- req->status = TEGRA_DMA_REQ_INFLIGHT;
- return;
-}
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- int ahb_addr_wrap;
- int apb_addr_wrap;
- int ahb_bus_width;
- int apb_bus_width;
- int index;
-
- u32 ahb_seq;
- u32 apb_seq;
- u32 ahb_ptr;
- u32 apb_ptr;
- u32 csr;
-
- csr = CSR_IE_EOC | CSR_FLOW;
- ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1;
- apb_seq = 0;
-
- csr |= req->req_sel << CSR_REQ_SEL_SHIFT;
-
- /* One shot mode is always single buffered,
- * continuous mode is always double buffered
- * */
- if (ch->mode & TEGRA_DMA_MODE_ONESHOT) {
- csr |= CSR_ONCE;
- ch->req_transfer_count = (req->size >> 2) - 1;
- } else {
- ahb_seq |= AHB_SEQ_DBL_BUF;
-
- /* In double buffered mode, we set the size to half the
- * requested size and interrupt when half the buffer
- * is full */
- ch->req_transfer_count = (req->size >> 3) - 1;
- }
-
- csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT;
-
- if (req->to_memory) {
- apb_ptr = req->source_addr;
- ahb_ptr = req->dest_addr;
-
- apb_addr_wrap = req->source_wrap;
- ahb_addr_wrap = req->dest_wrap;
- apb_bus_width = req->source_bus_width;
- ahb_bus_width = req->dest_bus_width;
-
- } else {
- csr |= CSR_DIR;
- apb_ptr = req->dest_addr;
- ahb_ptr = req->source_addr;
-
- apb_addr_wrap = req->dest_wrap;
- ahb_addr_wrap = req->source_wrap;
- apb_bus_width = req->dest_bus_width;
- ahb_bus_width = req->source_bus_width;
- }
-
- apb_addr_wrap >>= 2;
- ahb_addr_wrap >>= 2;
-
- /* set address wrap for APB size */
- index = 0;
- do {
- if (apb_addr_wrap_table[index] == apb_addr_wrap)
- break;
- index++;
- } while (index < ARRAY_SIZE(apb_addr_wrap_table));
- BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table));
- apb_seq |= index << APB_SEQ_WRAP_SHIFT;
-
- /* set address wrap for AHB size */
- index = 0;
- do {
- if (ahb_addr_wrap_table[index] == ahb_addr_wrap)
- break;
- index++;
- } while (index < ARRAY_SIZE(ahb_addr_wrap_table));
- BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table));
- ahb_seq |= index << AHB_SEQ_WRAP_SHIFT;
-
- for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
- if (bus_width_table[index] == ahb_bus_width)
- break;
- }
- BUG_ON(index == ARRAY_SIZE(bus_width_table));
- ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT;
-
- for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
- if (bus_width_table[index] == apb_bus_width)
- break;
- }
- BUG_ON(index == ARRAY_SIZE(bus_width_table));
- apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT;
-
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
- writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ);
- writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
- writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ);
- writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
- csr |= CSR_ENB;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- req->status = TEGRA_DMA_REQ_INFLIGHT;
-}
-
-static void handle_oneshot_dma(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
-
- req = list_entry(ch->list.next, typeof(*req), node);
- if (req) {
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 2;
-
- list_del(&req->node);
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- /* Callback should be called without any lock */
- pr_debug("%s: transferred %d bytes\n", __func__,
- req->bytes_transferred);
- req->complete(req);
- spin_lock_irqsave(&ch->lock, irq_flags);
- }
-
- if (!list_empty(&ch->list)) {
- req = list_entry(ch->list.next, typeof(*req), node);
- /* the complete function we just called may have enqueued
- another req, in which case dma has already started */
- if (req->status != TEGRA_DMA_REQ_INFLIGHT)
- tegra_dma_update_hw(ch, req);
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static void handle_continuous_dma(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
-
- req = list_entry(ch->list.next, typeof(*req), node);
- if (req) {
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) {
- bool is_dma_ping_complete;
- is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA)
- & STA_PING_PONG) ? true : false;
- if (req->to_memory)
- is_dma_ping_complete = !is_dma_ping_complete;
- /* Out of sync - Release current buffer */
- if (!is_dma_ping_complete) {
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 3;
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- tegra_dma_stop(ch);
-
- if (!list_is_last(&req->node, &ch->list)) {
- struct tegra_dma_req *next_req;
-
- next_req = list_entry(req->node.next,
- typeof(*next_req), node);
- tegra_dma_update_hw(ch, next_req);
- }
-
- list_del(&req->node);
-
- /* DMA lock is NOT held when callbak is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- req->complete(req);
- return;
- }
- /* Load the next request into the hardware, if available
- * */
- if (!list_is_last(&req->node, &ch->list)) {
- struct tegra_dma_req *next_req;
-
- next_req = list_entry(req->node.next,
- typeof(*next_req), node);
- tegra_dma_update_hw_partial(ch, next_req);
- }
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- /* DMA lock is NOT held when callback is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- if (likely(req->threshold))
- req->threshold(req);
- return;
-
- } else if (req->buffer_status ==
- TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) {
- /* Callback when the buffer is completely full (i.e on
- * the second interrupt */
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 3;
-
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- list_del(&req->node);
-
- /* DMA lock is NOT held when callbak is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- req->complete(req);
- return;
-
- } else {
- BUG();
- }
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static irqreturn_t dma_isr(int irq, void *data)
-{
- struct tegra_dma_channel *ch = data;
- unsigned long status;
-
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- if (status & STA_ISE_EOC)
- writel(status, ch->addr + APB_DMA_CHAN_STA);
- else {
- pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id);
- return IRQ_HANDLED;
- }
- return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t dma_thread_fn(int irq, void *data)
-{
- struct tegra_dma_channel *ch = data;
-
- if (ch->mode & TEGRA_DMA_MODE_ONESHOT)
- handle_oneshot_dma(ch);
- else
- handle_continuous_dma(ch);
-
-
- return IRQ_HANDLED;
-}
-
-int __init tegra_dma_init(void)
-{
- int ret = 0;
- int i;
- unsigned int irq;
- void __iomem *addr;
- struct clk *c;
-
- bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS);
-
- c = clk_get_sys("tegra-apbdma", NULL);
- if (IS_ERR(c)) {
- pr_err("Unable to get clock for APB DMA\n");
- ret = PTR_ERR(c);
- goto fail;
- }
- ret = clk_prepare_enable(c);
- if (ret != 0) {
- pr_err("Unable to enable clock for APB DMA\n");
- goto fail;
- }
-
- addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- writel(GEN_ENABLE, addr + APB_DMA_GEN);
- writel(0, addr + APB_DMA_CNTRL);
- writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX),
- addr + APB_DMA_IRQ_MASK_SET);
-
- for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
- struct tegra_dma_channel *ch = &dma_channels[i];
-
- ch->id = i;
- snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i);
-
- ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- spin_lock_init(&ch->lock);
- INIT_LIST_HEAD(&ch->list);
-
- irq = INT_APB_DMA_CH0 + i;
- ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0,
- dma_channels[i].name, ch);
- if (ret) {
- pr_err("Failed to register IRQ %d for DMA %d\n",
- irq, i);
- goto fail;
- }
- ch->irq = irq;
-
- __clear_bit(i, channel_usage);
- }
- /* mark the shared channel allocated */
- __set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage);
-
- tegra_dma_initialized = true;
-
- return 0;
-fail:
- writel(0, addr + APB_DMA_GEN);
- for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
- struct tegra_dma_channel *ch = &dma_channels[i];
- if (ch->irq)
- free_irq(ch->irq, ch);
- }
- return ret;
-}
-postcore_initcall(tegra_dma_init);
-
-#ifdef CONFIG_PM
-static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3];
-
-void tegra_dma_suspend(void)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- u32 *ctx = apb_dma;
- int i;
-
- *ctx++ = readl(addr + APB_DMA_GEN);
- *ctx++ = readl(addr + APB_DMA_CNTRL);
- *ctx++ = readl(addr + APB_DMA_IRQ_MASK);
-
- for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
- addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- *ctx++ = readl(addr + APB_DMA_CHAN_CSR);
- *ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR);
- *ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ);
- *ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR);
- *ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ);
- }
-}
-
-void tegra_dma_resume(void)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- u32 *ctx = apb_dma;
- int i;
-
- writel(*ctx++, addr + APB_DMA_GEN);
- writel(*ctx++, addr + APB_DMA_CNTRL);
- writel(*ctx++, addr + APB_DMA_IRQ_MASK);
-
- for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
- addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- writel(*ctx++, addr + APB_DMA_CHAN_CSR);
- writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR);
- writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ);
- writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR);
- writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ);
- }
-}
-
-#endif
{
u32 id;
- u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+ u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
reg |= 1 << 28;
- writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+ writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
reg = tegra_fuse_readl(FUSE_SKU_INFO);
tegra_sku_id = reg & 0xFF;
#include "flowctrl.h"
#include "reset.h"
+#include "sleep.h"
#define APB_MISC_GP_HIDREV 0x804
#define PMC_SCRATCH41 0x140
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
- .macro mov32, reg, val
- movw \reg, #:lower16:\val
- movt \reg, #:upper16:\val
- .endm
-
.section ".text.head", "ax"
__CPUINIT
/*
- * linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
+ * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
-#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
-#include <asm/cp15.h>
+#include <asm/smp_plat.h>
-static inline void cpu_enter_lowpower(void)
-{
- unsigned int v;
-
- flush_cache_all();
- asm volatile(
- " mcr p15, 0, %1, c7, c5, 0\n"
- " mcr p15, 0, %1, c7, c10, 4\n"
- /*
- * Turn off coherency
- */
- " mrc p15, 0, %0, c1, c0, 1\n"
- " bic %0, %0, #0x20\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- " mrc p15, 0, %0, c1, c0, 0\n"
- " bic %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- : "=&r" (v)
- : "r" (0), "Ir" (CR_C)
- : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
- unsigned int v;
+#include "sleep.h"
+#include "tegra_cpu_car.h"
- asm volatile(
- "mrc p15, 0, %0, c1, c0, 0\n"
- " orr %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- " mrc p15, 0, %0, c1, c0, 1\n"
- " orr %0, %0, #0x20\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- : "=&r" (v)
- : "Ir" (CR_C)
- : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
- /*
- * there is no power-control hardware on this platform, so all
- * we can do is put the core into WFI; this is safe as the calling
- * code will have already disabled interrupts
- */
- for (;;) {
- /*
- * here's the WFI
- */
- asm(".word 0xe320f003\n"
- :
- :
- : "memory", "cc");
-
- /*if (pen_release == cpu) {*/
- /*
- * OK, proper wakeup, we're done
- */
- break;
- /*}*/
-
- /*
- * Getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * Just note it happening - when we're woken, we can report
- * its occurrence.
- */
- (*spurious)++;
- }
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
+static void (*tegra_hotplug_shutdown)(void);
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref tegra_cpu_die(unsigned int cpu)
{
- int spurious = 0;
+ cpu = cpu_logical_map(cpu);
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu, &spurious);
+ /* Flush the L1 data cache. */
+ flush_cache_all();
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
+ /* Shut down the current CPU. */
+ tegra_hotplug_shutdown();
- if (spurious)
- pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+ /* Clock gate the CPU */
+ tegra_wait_cpu_in_reset(cpu);
+ tegra_disable_cpu_clock(cpu);
+
+ /* Should never return here. */
+ BUG();
}
-int platform_cpu_disable(unsigned int cpu)
+int tegra_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
*/
return cpu == 0 ? -EPERM : 0;
}
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+extern void tegra20_hotplug_shutdown(void);
+void __init tegra20_hotplug_init(void)
+{
+ tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+extern void tegra30_hotplug_shutdown(void);
+void __init tegra30_hotplug_init(void)
+{
+ tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+}
+#endif
void tegra_periph_reset_deassert(struct clk *c);
void tegra_periph_reset_assert(struct clk *c);
+#ifndef CONFIG_COMMON_CLK
unsigned long clk_get_rate_all_locked(struct clk *c);
+#endif
+
void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
-enum tegra_dma_mode {
- TEGRA_DMA_SHARED = 1,
- TEGRA_DMA_MODE_CONTINOUS = 2,
- TEGRA_DMA_MODE_ONESHOT = 4,
-};
-
-enum tegra_dma_req_error {
- TEGRA_DMA_REQ_SUCCESS = 0,
- TEGRA_DMA_REQ_ERROR_ABORTED,
- TEGRA_DMA_REQ_INFLIGHT,
-};
-
-enum tegra_dma_req_buff_status {
- TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0,
- TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL,
- TEGRA_DMA_REQ_BUF_STATUS_FULL,
-};
-
-struct tegra_dma_req {
- struct list_head node;
- unsigned int modid;
- int instance;
-
- /* Called when the req is complete and from the DMA ISR context.
- * When this is called the req structure is no longer queued by
- * the DMA channel.
- *
- * State of the DMA depends on the number of req it has. If there are
- * no DMA requests queued up, then it will STOP the DMA. It there are
- * more requests in the DMA, then it will queue the next request.
- */
- void (*complete)(struct tegra_dma_req *req);
-
- /* This is a called from the DMA ISR context when the DMA is still in
- * progress and is actively filling same buffer.
- *
- * In case of continuous mode receive, this threshold is 1/2 the buffer
- * size. In other cases, this will not even be called as there is no
- * hardware support for it.
- *
- * In the case of continuous mode receive, if there is next req already
- * queued, DMA programs the HW to use that req when this req is
- * completed. If there is no "next req" queued, then DMA ISR doesn't do
- * anything before calling this callback.
- *
- * This is mainly used by the cases, where the clients has queued
- * only one req and want to get some sort of DMA threshold
- * callback to program the next buffer.
- *
- */
- void (*threshold)(struct tegra_dma_req *req);
-
- /* 1 to copy to memory.
- * 0 to copy from the memory to device FIFO */
- int to_memory;
-
- void *virt_addr;
-
- unsigned long source_addr;
- unsigned long dest_addr;
- unsigned long dest_wrap;
- unsigned long source_wrap;
- unsigned long source_bus_width;
- unsigned long dest_bus_width;
- unsigned long req_sel;
- unsigned int size;
-
- /* Updated by the DMA driver on the conpletion of the request. */
- int bytes_transferred;
- int status;
-
- /* DMA completion tracking information */
- int buffer_status;
-
- /* Client specific data */
- void *dev;
-};
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-void tegra_dma_dequeue(struct tegra_dma_channel *ch);
-void tegra_dma_flush(struct tegra_dma_channel *ch);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode);
-void tegra_dma_free_channel(struct tegra_dma_channel *ch);
-
-int __init tegra_dma_init(void);
-
#endif
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * arch/arm/mach-tegra/include/mach/io.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IO_H
-#define __MACH_TEGRA_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-#ifndef __ASSEMBLER__
-
-#ifdef CONFIG_TEGRA_PCI
-extern void __iomem *tegra_pcie_io_base;
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT);
-}
-#else
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#endif
-
-#define __io(a) __io(a)
-
-#endif
-
-#endif
#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
+#define TEGRA_PCIE_BASE 0x80000000
+#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M)
+
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst)))
+++ /dev/null
-/*
- * include/asm-arm/arch-tegra/include/mach/sdhci.h
- *
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H
-#define __ASM_ARM_ARCH_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
- int cd_gpio;
- int wp_gpio;
- int power_gpio;
- int is_8bit;
- int pm_flags;
-};
-
-#endif
* 0x90000000 - 0x9fffffff - non-prefetchable memory
* 0xa0000000 - 0xbfffffff - prefetchable memory
*/
-#define TEGRA_PCIE_BASE 0x80000000
-
#define PCIE_REGS_SZ SZ_16K
#define PCIE_CFG_OFF PCIE_REGS_SZ
#define PCIE_CFG_SZ SZ_1M
#define PCIE_EXT_CFG_SZ SZ_1M
#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-#define MMIO_BASE (TEGRA_PCIE_BASE + SZ_4M)
-#define MMIO_SIZE SZ_64K
#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M)
#define MEM_SIZE_0 SZ_128M
#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0)
bool link_up;
- char io_space_name[16];
char mem_space_name[16];
char prefetch_space_name[20];
- struct resource res[3];
+ struct resource res[2];
};
struct tegra_pcie_info {
struct clk *pll_e;
};
-static struct tegra_pcie_info tegra_pcie = {
- .res_mmio = {
- .name = "PCI IO",
- .start = MMIO_BASE,
- .end = MMIO_BASE + MMIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-void __iomem *tegra_pcie_io_base;
-EXPORT_SYMBOL(tegra_pcie_io_base);
+static struct tegra_pcie_info tegra_pcie;
static inline void afi_writel(u32 value, unsigned long offset)
{
pp = tegra_pcie.port + nr;
pp->root_bus_nr = sys->busnr;
- /*
- * IORESOURCE_IO
- */
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d I/O", pp->index);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- if (pp->index == 0) {
- pp->res[0].start = PCIBIOS_MIN_IO;
- pp->res[0].end = pp->res[0].start + SZ_32K - 1;
- } else {
- pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K;
- pp->res[0].end = IO_SPACE_LIMIT;
- }
- pp->res[0].flags = IORESOURCE_IO;
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+ pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
/*
* IORESOURCE_MEM
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
+ pp->res[0].name = pp->mem_space_name;
if (pp->index == 0) {
- pp->res[1].start = MEM_BASE_0;
- pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1;
+ pp->res[0].start = MEM_BASE_0;
+ pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
} else {
- pp->res[1].start = MEM_BASE_1;
- pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1;
+ pp->res[0].start = MEM_BASE_1;
+ pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
}
- pp->res[1].flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pp->res[1]))
+ pp->res[0].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[0]))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
/*
* IORESOURCE_MEM | IORESOURCE_PREFETCH
snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
"PCIe %d PREFETCH MEM", pp->index);
pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
- pp->res[2].name = pp->prefetch_space_name;
+ pp->res[1].name = pp->prefetch_space_name;
if (pp->index == 0) {
- pp->res[2].start = PREFETCH_MEM_BASE_0;
- pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1;
+ pp->res[1].start = PREFETCH_MEM_BASE_0;
+ pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
} else {
- pp->res[2].start = PREFETCH_MEM_BASE_1;
- pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1;
+ pp->res[1].start = PREFETCH_MEM_BASE_1;
+ pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
}
- pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if (request_resource(&iomem_resource, &pp->res[2]))
+ pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe Prefetch Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
return 1;
}
/* Bar 2: downstream IO bar */
fpci_bar = ((__u32)0xfdfc << 16);
- size = MMIO_SIZE;
- axi_address = MMIO_BASE;
+ size = SZ_128K;
+ axi_address = TEGRA_PCIE_IO_BASE;
afi_writel(axi_address, AFI_AXI_BAR2_START);
afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
afi_writel(fpci_bar, AFI_FPCI_BAR2);
static int __init tegra_pcie_get_resources(void)
{
- struct resource *res_mmio = &tegra_pcie.res_mmio;
int err;
err = tegra_pcie_clocks_get();
goto err_map_reg;
}
- err = request_resource(&iomem_resource, res_mmio);
- if (err) {
- pr_err("PCIE: Failed to request resources: %d\n", err);
- goto err_req_io;
- }
-
- tegra_pcie_io_base = ioremap_nocache(res_mmio->start,
- resource_size(res_mmio));
- if (tegra_pcie_io_base == NULL) {
- pr_err("PCIE: Failed to map IO\n");
- err = -ENOMEM;
- goto err_map_io;
- }
-
err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
IRQF_SHARED, "PCIE", &tegra_pcie);
if (err) {
pr_err("PCIE: Failed to register IRQ: %d\n", err);
- goto err_irq;
+ goto err_req_io;
}
set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
return 0;
-err_irq:
- iounmap(tegra_pcie_io_base);
-err_map_io:
- release_resource(&tegra_pcie.res_mmio);
err_req_io:
iounmap(tegra_pcie.regs);
err_map_reg:
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
+#include "tegra_cpu_car.h"
+
+#include "common.h"
extern void tegra_secondary_startup(void);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
- (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
- (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
- (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
- (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
-
-#define CPU_CLOCK(cpu) (0x1<<(8+cpu))
-#define CPU_RESET(cpu) (0x1111ul<<(cpu))
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+
+static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
static int tegra20_power_up_cpu(unsigned int cpu)
{
- u32 reg;
-
/* Enable the CPU clock. */
- reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
- writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
- barrier();
- reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ tegra_enable_cpu_clock(cpu);
/* Clear flow controller CSR. */
flowctrl_write_cpu_csr(cpu, 0);
static int tegra30_power_up_cpu(unsigned int cpu)
{
- u32 reg;
int ret, pwrgateid;
unsigned long timeout;
}
/* CPU partition is powered. Enable the CPU clock. */
- writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
- reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+ tegra_enable_cpu_clock(cpu);
udelay(10);
/* Remove I/O clamps. */
return 0;
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int status;
* via the flow controller). This will have no effect on first boot
* of the CPU since it should already be in reset.
*/
- writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
- dmb();
+ tegra_put_cpu_in_reset(cpu);
/*
* Unhalt the CPU. If the flow controller was used to power-gate the
goto done;
/* Take the CPU out of reset. */
- writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
- wmb();
+ tegra_cpu_out_of_reset(cpu);
done:
return status;
}
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init tegra_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
{
tegra_cpu_reset_handler_init();
scu_enable(scu_base);
}
+
+struct smp_operations tegra_smp_ops __initdata = {
+ .smp_init_cpus = tegra_smp_init_cpus,
+ .smp_prepare_cpus = tegra_smp_prepare_cpus,
+ .smp_secondary_init = tegra_secondary_init,
+ .smp_boot_secondary = tegra_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = tegra_cpu_die,
+ .cpu_disable = tegra_cpu_disable,
+#endif
+};
--- /dev/null
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ * Gary King <gking@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/iomap.h>
+
+#include "sleep.h"
+#include "flowctrl.h"
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra20_hotplug_shutdown(void)
+ *
+ * puts the current cpu in reset
+ * should never return
+ */
+ENTRY(tegra20_hotplug_shutdown)
+ /* Turn off SMP coherency */
+ exit_smp r4, r5
+
+ /* Put this CPU down */
+ cpu_id r0
+ bl tegra20_cpu_shutdown
+ mov pc, lr @ should never get here
+ENDPROC(tegra20_hotplug_shutdown)
+
+/*
+ * tegra20_cpu_shutdown(int cpu)
+ *
+ * r0 is cpu to reset
+ *
+ * puts the specified CPU in wait-for-event mode on the flow controller
+ * and puts the CPU in reset
+ * can be called on the current cpu or another cpu
+ * if called on the current cpu, does not return
+ * MUST NOT BE CALLED FOR CPU 0.
+ *
+ * corrupts r0-r3, r12
+ */
+ENTRY(tegra20_cpu_shutdown)
+ cmp r0, #0
+ moveq pc, lr @ must not be called for CPU 0
+
+ cpu_to_halt_reg r1, r0
+ ldr r3, =TEGRA_FLOW_CTRL_VIRT
+ mov r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME
+ str r2, [r3, r1] @ put flow controller in wait event mode
+ ldr r2, [r3, r1]
+ isb
+ dsb
+ movw r1, 0x1011
+ mov r1, r1, lsl r0
+ ldr r3, =TEGRA_CLK_RESET_VIRT
+ str r1, [r3, #0x340] @ put slave CPU in reset
+ isb
+ dsb
+ cpu_id r3
+ cmp r3, r0
+ beq .
+ mov pc, lr
+ENDPROC(tegra20_cpu_shutdown)
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/iomap.h>
+
+#include "sleep.h"
+#include "flowctrl.h"
+
+#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra30_hotplug_shutdown(void)
+ *
+ * Powergates the current CPU.
+ * Should never return.
+ */
+ENTRY(tegra30_hotplug_shutdown)
+ /* Turn off SMP coherency */
+ exit_smp r4, r5
+
+ /* Powergate this CPU */
+ mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+ bl tegra30_cpu_shutdown
+ mov pc, lr @ should never get here
+ENDPROC(tegra30_hotplug_shutdown)
+
+/*
+ * tegra30_cpu_shutdown(unsigned long flags)
+ *
+ * Puts the current CPU in wait-for-event mode on the flow controller
+ * and powergates it -- flags (in R0) indicate the request type.
+ * Must never be called for CPU 0.
+ *
+ * corrupts r0-r4, r12
+ */
+ENTRY(tegra30_cpu_shutdown)
+ cpu_id r3
+ cmp r3, #0
+ moveq pc, lr @ Must never be called for CPU 0
+
+ ldr r12, =TEGRA_FLOW_CTRL_VIRT
+ cpu_to_csr_reg r1, r3
+ add r1, r1, r12 @ virtual CSR address for this CPU
+ cpu_to_halt_reg r2, r3
+ add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
+
+ /*
+ * Clear this CPU's "event" and "interrupt" flags and power gate
+ * it when halting but not before it is in the "WFE" state.
+ */
+ movw r12, \
+ FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
+ FLOW_CTRL_CSR_ENABLE
+ mov r4, #(1 << 4)
+ orr r12, r12, r4, lsl r3
+ str r12, [r1]
+
+ /* Halt this CPU. */
+ mov r3, #0x400
+delay_1:
+ subs r3, r3, #1 @ delay as a part of wfe war.
+ bge delay_1;
+ cpsid a @ disable imprecise aborts.
+ ldr r3, [r1] @ read CSR
+ str r3, [r1] @ clear CSR
+ tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+ movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug
+ str r3, [r2]
+ ldr r0, [r2]
+ b wfe_war
+
+__cpu_reset_again:
+ dsb
+ .align 5
+ wfe @ CPU should be power gated here
+wfe_war:
+ b __cpu_reset_again
+
+ /*
+ * 38 nop's, which fills reset of wfe cache line and
+ * 4 more cachelines with nop
+ */
+ .rept 38
+ nop
+ .endr
+ b . @ should never get here
+
+ENDPROC(tegra30_cpu_shutdown)
+#endif
#include <mach/iomap.h>
#include "flowctrl.h"
+#include "sleep.h"
-#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
- + IO_PPSB_VIRT)
-
-/* returns the offset of the flow controller halt register for a cpu */
-.macro cpu_to_halt_reg rd, rcpu
- cmp \rcpu, #0
- subne \rd, \rcpu, #1
- movne \rd, \rd, lsl #3
- addne \rd, \rd, #0x14
- moveq \rd, #0
-.endm
-
-/* returns the offset of the flow controller csr register for a cpu */
-.macro cpu_to_csr_reg rd, rcpu
- cmp \rcpu, #0
- subne \rd, \rcpu, #1
- movne \rd, \rd, lsl #3
- addne \rd, \rd, #0x18
- moveq \rd, #8
-.endm
-
-/* returns the ID of the current processor */
-.macro cpu_id, rd
- mrc p15, 0, \rd, c0, c0, 5
- and \rd, \rd, #0xF
-.endm
-
-/* loads a 32-bit value into a register without a data access */
-.macro mov32, reg, val
- movw \reg, #:lower16:\val
- movt \reg, #:upper16:\val
-.endm
--- /dev/null
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_SLEEP_H
+#define __MACH_TEGRA_SLEEP_H
+
+#include <mach/iomap.h>
+
+#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+ + IO_CPU_VIRT)
+#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+ + IO_PPSB_VIRT)
+#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+ + IO_PPSB_VIRT)
+
+#ifdef __ASSEMBLY__
+/* returns the offset of the flow controller halt register for a cpu */
+.macro cpu_to_halt_reg rd, rcpu
+ cmp \rcpu, #0
+ subne \rd, \rcpu, #1
+ movne \rd, \rd, lsl #3
+ addne \rd, \rd, #0x14
+ moveq \rd, #0
+.endm
+
+/* returns the offset of the flow controller csr register for a cpu */
+.macro cpu_to_csr_reg rd, rcpu
+ cmp \rcpu, #0
+ subne \rd, \rcpu, #1
+ movne \rd, \rd, lsl #3
+ addne \rd, \rd, #0x18
+ moveq \rd, #8
+.endm
+
+/* returns the ID of the current processor */
+.macro cpu_id, rd
+ mrc p15, 0, \rd, c0, c0, 5
+ and \rd, \rd, #0xF
+.endm
+
+/* loads a 32-bit value into a register without a data access */
+.macro mov32, reg, val
+ movw \reg, #:lower16:\val
+ movt \reg, #:upper16:\val
+.endm
+
+/* Macro to exit SMP coherency. */
+.macro exit_smp, tmp1, tmp2
+ mrc p15, 0, \tmp1, c1, c0, 1 @ ACTLR
+ bic \tmp1, \tmp1, #(1<<6) | (1<<0) @ clear ACTLR.SMP | ACTLR.FW
+ mcr p15, 0, \tmp1, c1, c0, 1 @ ACTLR
+ isb
+ cpu_id \tmp1
+ mov \tmp1, \tmp1, lsl #2
+ mov \tmp2, #0xf
+ mov \tmp2, \tmp2, lsl \tmp1
+ mov32 \tmp1, TEGRA_ARM_PERIF_VIRT + 0xC
+ str \tmp2, [\tmp1] @ invalidate SCU tags for CPU
+ dsb
+.endm
+#else
+
+#ifdef CONFIG_HOTPLUG_CPU
+void tegra20_hotplug_init(void);
+void tegra30_hotplug_init(void);
+#else
+static inline void tegra20_hotplug_init(void) {}
+static inline void tegra30_hotplug_init(void) {}
+#endif
+
+#endif
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-tegra/tegra20_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+
+#include <mach/iomap.h>
+#include <mach/suspend.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra2_emc.h"
+#include "tegra_cpu_car.h"
+
+#define RST_DEVICES 0x004
+#define RST_DEVICES_SET 0x300
+#define RST_DEVICES_CLR 0x304
+#define RST_DEVICES_NUM 3
+
+#define CLK_OUT_ENB 0x010
+#define CLK_OUT_ENB_SET 0x320
+#define CLK_OUT_ENB_CLR 0x324
+#define CLK_OUT_ENB_NUM 3
+
+#define CLK_MASK_ARM 0x44
+#define MISC_CLK_ENB 0x48
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30)
+#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_FREQ_DET 0x58
+#define OSC_FREQ_DET_TRIG (1<<31)
+
+#define OSC_FREQ_DET_STATUS 0x5C
+#define OSC_FREQ_DET_BUSY (1<<31)
+#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+
+#define PERIPH_CLK_SOURCE_I2S1 0x100
+#define PERIPH_CLK_SOURCE_EMC 0x19c
+#define PERIPH_CLK_SOURCE_OSC 0x1fc
+#define PERIPH_CLK_SOURCE_NUM \
+ ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
+
+#define PERIPH_CLK_SOURCE_MASK (3<<30)
+#define PERIPH_CLK_SOURCE_SHIFT 30
+#define PERIPH_CLK_SOURCE_PWM_MASK (7<<28)
+#define PERIPH_CLK_SOURCE_PWM_SHIFT 28
+#define PERIPH_CLK_SOURCE_ENABLE (1<<28)
+#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF
+#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT 0
+
+#define SDMMC_CLK_INT_FB_SEL (1 << 23)
+#define SDMMC_CLK_INT_FB_DLY_SHIFT 16
+#define SDMMC_CLK_INT_FB_DLY_MASK (0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
+
+#define PLL_BASE 0x0
+#define PLL_BASE_BYPASS (1<<31)
+#define PLL_BASE_ENABLE (1<<30)
+#define PLL_BASE_REF_ENABLE (1<<29)
+#define PLL_BASE_OVERRIDE (1<<28)
+#define PLL_BASE_DIVP_MASK (0x7<<20)
+#define PLL_BASE_DIVP_SHIFT 20
+#define PLL_BASE_DIVN_MASK (0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT 8
+#define PLL_BASE_DIVM_MASK (0x1F)
+#define PLL_BASE_DIVM_SHIFT 0
+
+#define PLL_OUT_RATIO_MASK (0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT 8
+#define PLL_OUT_OVERRIDE (1<<2)
+#define PLL_OUT_CLKEN (1<<1)
+#define PLL_OUT_RESET_DISABLE (1<<0)
+
+#define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+
+#define PLL_MISC_DCCON_SHIFT 20
+#define PLL_MISC_CPCON_SHIFT 8
+#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT 4
+#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT 0
+#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT)
+
+#define PLLU_BASE_POST_DIV (1<<20)
+
+#define PLLD_MISC_CLKENABLE (1<<30)
+#define PLLD_MISC_DIV_RST (1<<23)
+#define PLLD_MISC_DCCON_SHIFT 12
+
+#define PLLE_MISC_READY (1 << 15)
+
+#define PERIPH_CLK_TO_ENB_REG(c) ((c->u.periph.clk_num / 32) * 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->u.periph.clk_num / 32) * 8)
+#define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->u.periph.clk_num % 32))
+
+#define SUPER_CLK_MUX 0x00
+#define SUPER_STATE_SHIFT 28
+#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT)
+#define SUPER_SOURCE_MASK 0xF
+#define SUPER_FIQ_SOURCE_SHIFT 12
+#define SUPER_IRQ_SOURCE_SHIFT 8
+#define SUPER_RUN_SOURCE_SHIFT 4
+#define SUPER_IDLE_SOURCE_SHIFT 0
+
+#define SUPER_CLK_DIVIDER 0x04
+
+#define BUS_CLK_DISABLE (1<<3)
+#define BUS_CLK_DIV_MASK 0x3
+
+#define PMC_CTRL 0x0
+ #define PMC_CTRL_BLINK_ENB (1 << 7)
+
+#define PMC_DPD_PADS_ORIDE 0x1c
+ #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20)
+
+#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0
+#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff
+#define PMC_BLINK_TIMER_ENB (1 << 15)
+#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16
+#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff
+
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344
+
+#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
+#define CPU_RESET(cpu) (0x1111ul << (cpu))
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
+
+/*
+ * Some clocks share a register with other clocks. Any clock op that
+ * non-atomically modifies a register used by another clock must lock
+ * clock_register_lock first.
+ */
+static DEFINE_SPINLOCK(clock_register_lock);
+
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
+ */
+static int tegra_periph_clk_enable_refcount[3 * 32];
+
+#define clk_writel(value, reg) \
+ __raw_writel(value, reg_clk_base + (reg))
+#define clk_readl(reg) \
+ __raw_readl(reg_clk_base + (reg))
+#define pmc_writel(value, reg) \
+ __raw_writel(value, reg_pmc_base + (reg))
+#define pmc_readl(reg) \
+ __raw_readl(reg_pmc_base + (reg))
+
+static unsigned long clk_measure_input_freq(void)
+{
+ u32 clock_autodetect;
+ clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+ do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+ clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+ if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+ return 12000000;
+ } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+ return 13000000;
+ } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+ return 19200000;
+ } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+ return 26000000;
+ } else {
+ pr_err("%s: Unexpected clock autodetect value %d",
+ __func__, clock_autodetect);
+ BUG();
+ return 0;
+ }
+}
+
+static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+ s64 divider_u71 = parent_rate * 2;
+ divider_u71 += rate - 1;
+ do_div(divider_u71, rate);
+
+ if (divider_u71 - 2 < 0)
+ return 0;
+
+ if (divider_u71 - 2 > 255)
+ return -EINVAL;
+
+ return divider_u71 - 2;
+}
+
+static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+ s64 divider_u16;
+
+ divider_u16 = parent_rate;
+ divider_u16 += rate - 1;
+ do_div(divider_u16, rate);
+
+ if (divider_u16 - 1 < 0)
+ return 0;
+
+ if (divider_u16 - 1 > 0xFFFF)
+ return -EINVAL;
+
+ return divider_u16 - 1;
+}
+
+static unsigned long tegra_clk_fixed_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra_clk_32k_ops = {
+ .recalc_rate = tegra_clk_fixed_recalc_rate,
+};
+
+/* clk_m functions */
+static unsigned long tegra20_clk_m_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ if (!to_clk_tegra(hw)->fixed_rate)
+ to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq();
+ return to_clk_tegra(hw)->fixed_rate;
+}
+
+static void tegra20_clk_m_init(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 osc_ctrl = clk_readl(OSC_CTRL);
+ u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
+
+ switch (c->fixed_rate) {
+ case 12000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+ break;
+ case 13000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+ break;
+ case 19200000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+ break;
+ case 26000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+ break;
+ default:
+ BUG();
+ }
+ clk_writel(auto_clock_control, OSC_CTRL);
+}
+
+struct clk_ops tegra_clk_m_ops = {
+ .init = tegra20_clk_m_init,
+ .recalc_rate = tegra20_clk_m_recalc_rate,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra have two-stage muxes and a clock skipping
+ * super divider. We will ignore the clock skipping divider, since we
+ * can't lower the voltage when using the clock skip, but we can if we
+ * lower the PLL frequency.
+ */
+static int tegra20_super_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ val = clk_readl(c->reg + SUPER_CLK_MUX);
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ c->state = ON;
+ return c->state;
+}
+
+static int tegra20_super_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+ return 0;
+}
+
+static void tegra20_super_clk_disable(struct clk_hw *hw)
+{
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ /* oops - don't disable the CPU clock! */
+ BUG();
+}
+
+static u8 tegra20_super_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ int val = clk_readl(c->reg + SUPER_CLK_MUX);
+ int source;
+ int shift;
+
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+ SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+ source = (val >> shift) & SUPER_SOURCE_MASK;
+ return source;
+}
+
+static int tegra20_super_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg + SUPER_CLK_MUX);
+ int shift;
+
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+ SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+ val &= ~(SUPER_SOURCE_MASK << shift);
+ val |= index << shift;
+
+ clk_writel(val, c->reg);
+
+ return 0;
+}
+
+/* FIX ME: Need to switch parents to change the source PLL rate */
+static unsigned long tegra20_super_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ return prate;
+}
+
+static long tegra20_super_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return *prate;
+}
+
+static int tegra20_super_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+struct clk_ops tegra_super_ops = {
+ .is_enabled = tegra20_super_clk_is_enabled,
+ .enable = tegra20_super_clk_enable,
+ .disable = tegra20_super_clk_disable,
+ .set_parent = tegra20_super_clk_set_parent,
+ .get_parent = tegra20_super_clk_get_parent,
+ .set_rate = tegra20_super_clk_set_rate,
+ .round_rate = tegra20_super_clk_round_rate,
+ .recalc_rate = tegra20_super_clk_recalc_rate,
+};
+
+static unsigned long tegra20_twd_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+struct clk_ops tegra_twd_ops = {
+ .recalc_rate = tegra20_twd_clk_recalc_rate,
+};
+
+static u8 tegra20_cop_clk_get_parent(struct clk_hw *hw)
+{
+ return 0;
+}
+
+struct clk_ops tegra_cop_ops = {
+ .get_parent = tegra20_cop_clk_get_parent,
+};
+
+/* virtual cop clock functions. Used to acquire the fake 'cop' clock to
+ * reset the COP block (i.e. AVP) */
+void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert)
+{
+ unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
+
+ pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert");
+ clk_writel(1 << 1, reg);
+}
+
+/* bus clock functions */
+static int tegra20_bus_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+
+ c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
+ return c->state;
+}
+
+static int tegra20_bus_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&clock_register_lock, flags);
+
+ val = clk_readl(c->reg);
+ val &= ~(BUS_CLK_DISABLE << c->reg_shift);
+ clk_writel(val, c->reg);
+
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+
+ return 0;
+}
+
+static void tegra20_bus_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&clock_register_lock, flags);
+
+ val = clk_readl(c->reg);
+ val |= BUS_CLK_DISABLE << c->reg_shift;
+ clk_writel(val, c->reg);
+
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+}
+
+static unsigned long tegra20_bus_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+ u64 rate = prate;
+
+ c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
+ c->mul = 1;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+ return rate;
+}
+
+static int tegra20_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ int ret = -EINVAL;
+ unsigned long flags;
+ u32 val;
+ int i;
+
+ spin_lock_irqsave(&clock_register_lock, flags);
+
+ val = clk_readl(c->reg);
+ for (i = 1; i <= 4; i++) {
+ if (rate == parent_rate / i) {
+ val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
+ val |= (i - 1) << c->reg_shift;
+ clk_writel(val, c->reg);
+ c->div = i;
+ c->mul = 1;
+ ret = 0;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+
+ return ret;
+}
+
+static long tegra20_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ s64 divider;
+
+ if (rate >= parent_rate)
+ return rate;
+
+ divider = parent_rate;
+ divider += rate - 1;
+ do_div(divider, rate);
+
+ if (divider < 0)
+ return divider;
+
+ if (divider > 4)
+ divider = 4;
+ do_div(parent_rate, divider);
+
+ return parent_rate;
+}
+
+struct clk_ops tegra_bus_ops = {
+ .is_enabled = tegra20_bus_clk_is_enabled,
+ .enable = tegra20_bus_clk_enable,
+ .disable = tegra20_bus_clk_disable,
+ .set_rate = tegra20_bus_clk_set_rate,
+ .round_rate = tegra20_bus_clk_round_rate,
+ .recalc_rate = tegra20_bus_clk_recalc_rate,
+};
+
+/* Blink output functions */
+static int tegra20_blink_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ val = pmc_readl(PMC_CTRL);
+ c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
+ return c->state;
+}
+
+static unsigned long tegra20_blink_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = prate;
+ u32 val;
+
+ c->mul = 1;
+ val = pmc_readl(c->reg);
+
+ if (val & PMC_BLINK_TIMER_ENB) {
+ unsigned int on_off;
+
+ on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+ PMC_BLINK_TIMER_DATA_ON_MASK;
+ val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+ val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+ on_off += val;
+ /* each tick in the blink timer is 4 32KHz clocks */
+ c->div = on_off * 4;
+ } else {
+ c->div = 1;
+ }
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+ return rate;
+}
+
+static int tegra20_blink_clk_enable(struct clk_hw *hw)
+{
+ u32 val;
+
+ val = pmc_readl(PMC_DPD_PADS_ORIDE);
+ pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+
+ val = pmc_readl(PMC_CTRL);
+ pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+ return 0;
+}
+
+static void tegra20_blink_clk_disable(struct clk_hw *hw)
+{
+ u32 val;
+
+ val = pmc_readl(PMC_CTRL);
+ pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+ val = pmc_readl(PMC_DPD_PADS_ORIDE);
+ pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+}
+
+static int tegra20_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ if (rate >= parent_rate) {
+ c->div = 1;
+ pmc_writel(0, c->reg);
+ } else {
+ unsigned int on_off;
+ u32 val;
+
+ on_off = DIV_ROUND_UP(parent_rate / 8, rate);
+ c->div = on_off * 8;
+
+ val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
+ PMC_BLINK_TIMER_DATA_ON_SHIFT;
+ on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+ on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+ val |= on_off;
+ val |= PMC_BLINK_TIMER_ENB;
+ pmc_writel(val, c->reg);
+ }
+
+ return 0;
+}
+
+static long tegra20_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int div;
+ int mul;
+ long round_rate = *prate;
+
+ mul = 1;
+
+ if (rate >= *prate) {
+ div = 1;
+ } else {
+ div = DIV_ROUND_UP(*prate / 8, rate);
+ div *= 8;
+ }
+
+ round_rate *= mul;
+ round_rate += div - 1;
+ do_div(round_rate, div);
+
+ return round_rate;
+}
+
+struct clk_ops tegra_blink_clk_ops = {
+ .is_enabled = tegra20_blink_clk_is_enabled,
+ .enable = tegra20_blink_clk_enable,
+ .disable = tegra20_blink_clk_disable,
+ .set_rate = tegra20_blink_clk_set_rate,
+ .round_rate = tegra20_blink_clk_round_rate,
+ .recalc_rate = tegra20_blink_clk_recalc_rate,
+};
+
+/* PLL Functions */
+static int tegra20_pll_clk_wait_for_lock(struct clk_tegra *c)
+{
+ udelay(c->u.pll.lock_delay);
+ return 0;
+}
+
+static int tegra20_pll_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg + PLL_BASE);
+
+ c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+ return c->state;
+}
+
+static unsigned long tegra20_pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg + PLL_BASE);
+ u64 rate = prate;
+
+ if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+ const struct clk_pll_freq_table *sel;
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == prate &&
+ sel->output_rate == c->u.pll.fixed_rate) {
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+ break;
+ }
+ }
+ pr_err("Clock %s has unknown fixed frequency\n",
+ __clk_get_name(hw->clk));
+ BUG();
+ } else if (val & PLL_BASE_BYPASS) {
+ c->mul = 1;
+ c->div = 1;
+ } else {
+ c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+ c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+ if (c->flags & PLLU)
+ c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+ else
+ c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
+ }
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+ return rate;
+}
+
+static int tegra20_pll_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ val = clk_readl(c->reg + PLL_BASE);
+ val &= ~PLL_BASE_BYPASS;
+ val |= PLL_BASE_ENABLE;
+ clk_writel(val, c->reg + PLL_BASE);
+
+ tegra20_pll_clk_wait_for_lock(c);
+
+ return 0;
+}
+
+static void tegra20_pll_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ val = clk_readl(c->reg);
+ val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ clk_writel(val, c->reg);
+}
+
+static int tegra20_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long input_rate = parent_rate;
+ const struct clk_pll_freq_table *sel;
+ u32 val;
+
+ pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+ if (c->flags & PLL_FIXED) {
+ int ret = 0;
+ if (rate != c->u.pll.fixed_rate) {
+ pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
+ __func__, __clk_get_name(hw->clk),
+ c->u.pll.fixed_rate, rate);
+ ret = -EINVAL;
+ }
+ return ret;
+ }
+
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == input_rate && sel->output_rate == rate) {
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+
+ val = clk_readl(c->reg + PLL_BASE);
+ if (c->flags & PLL_FIXED)
+ val |= PLL_BASE_OVERRIDE;
+ val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
+ PLL_BASE_DIVM_MASK);
+ val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
+ (sel->n << PLL_BASE_DIVN_SHIFT);
+ BUG_ON(sel->p < 1 || sel->p > 2);
+ if (c->flags & PLLU) {
+ if (sel->p == 1)
+ val |= PLLU_BASE_POST_DIV;
+ } else {
+ if (sel->p == 2)
+ val |= 1 << PLL_BASE_DIVP_SHIFT;
+ }
+ clk_writel(val, c->reg + PLL_BASE);
+
+ if (c->flags & PLL_HAS_CPCON) {
+ val = clk_readl(c->reg + PLL_MISC(c));
+ val &= ~PLL_MISC_CPCON_MASK;
+ val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
+ clk_writel(val, c->reg + PLL_MISC(c));
+ }
+
+ if (c->state == ON)
+ tegra20_pll_clk_enable(hw);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static long tegra20_pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ const struct clk_pll_freq_table *sel;
+ unsigned long input_rate = *prate;
+ u64 output_rate = *prate;
+ int mul;
+ int div;
+
+ if (c->flags & PLL_FIXED)
+ return c->u.pll.fixed_rate;
+
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++)
+ if (sel->input_rate == input_rate && sel->output_rate == rate) {
+ mul = sel->n;
+ div = sel->m * sel->p;
+ break;
+ }
+
+ if (sel->input_rate == 0)
+ return -EINVAL;
+
+ output_rate *= mul;
+ output_rate += div - 1; /* round up */
+ do_div(output_rate, div);
+
+ return output_rate;
+}
+
+struct clk_ops tegra_pll_ops = {
+ .is_enabled = tegra20_pll_clk_is_enabled,
+ .enable = tegra20_pll_clk_enable,
+ .disable = tegra20_pll_clk_disable,
+ .set_rate = tegra20_pll_clk_set_rate,
+ .recalc_rate = tegra20_pll_clk_recalc_rate,
+ .round_rate = tegra20_pll_clk_round_rate,
+};
+
+static void tegra20_pllx_clk_init(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ if (tegra_sku_id == 7)
+ c->max_rate = 750000000;
+}
+
+struct clk_ops tegra_pllx_ops = {
+ .init = tegra20_pllx_clk_init,
+ .is_enabled = tegra20_pll_clk_is_enabled,
+ .enable = tegra20_pll_clk_enable,
+ .disable = tegra20_pll_clk_disable,
+ .set_rate = tegra20_pll_clk_set_rate,
+ .recalc_rate = tegra20_pll_clk_recalc_rate,
+ .round_rate = tegra20_pll_clk_round_rate,
+};
+
+static int tegra20_plle_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ mdelay(1);
+
+ val = clk_readl(c->reg + PLL_BASE);
+ if (!(val & PLLE_MISC_READY))
+ return -EBUSY;
+
+ val = clk_readl(c->reg + PLL_BASE);
+ val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
+ clk_writel(val, c->reg + PLL_BASE);
+
+ return 0;
+}
+
+struct clk_ops tegra_plle_ops = {
+ .is_enabled = tegra20_pll_clk_is_enabled,
+ .enable = tegra20_plle_clk_enable,
+ .set_rate = tegra20_pll_clk_set_rate,
+ .recalc_rate = tegra20_pll_clk_recalc_rate,
+ .round_rate = tegra20_pll_clk_round_rate,
+};
+
+/* Clock divider ops */
+static int tegra20_pll_div_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+
+ val >>= c->reg_shift;
+ c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+ if (!(val & PLL_OUT_RESET_DISABLE))
+ c->state = OFF;
+ return c->state;
+}
+
+static unsigned long tegra20_pll_div_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = prate;
+ u32 val = clk_readl(c->reg);
+ u32 divu71;
+
+ val >>= c->reg_shift;
+
+ if (c->flags & DIV_U71) {
+ divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+ c->div = (divu71 + 2);
+ c->mul = 2;
+ } else if (c->flags & DIV_2) {
+ c->div = 2;
+ c->mul = 1;
+ } else {
+ c->div = 1;
+ c->mul = 1;
+ }
+
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+
+ return rate;
+}
+
+static int tegra20_pll_div_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ u32 new_val;
+ u32 val;
+
+ pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
+
+ if (c->flags & DIV_U71) {
+ spin_lock_irqsave(&clock_register_lock, flags);
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+
+ new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel(val, c->reg);
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+ return 0;
+ } else if (c->flags & DIV_2) {
+ BUG_ON(!(c->flags & PLLD));
+ spin_lock_irqsave(&clock_register_lock, flags);
+ val = clk_readl(c->reg);
+ val &= ~PLLD_MISC_DIV_RST;
+ clk_writel(val, c->reg);
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void tegra20_pll_div_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ u32 new_val;
+ u32 val;
+
+ pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
+
+ if (c->flags & DIV_U71) {
+ spin_lock_irqsave(&clock_register_lock, flags);
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+
+ new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel(val, c->reg);
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+ } else if (c->flags & DIV_2) {
+ BUG_ON(!(c->flags & PLLD));
+ spin_lock_irqsave(&clock_register_lock, flags);
+ val = clk_readl(c->reg);
+ val |= PLLD_MISC_DIV_RST;
+ clk_writel(val, c->reg);
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+ }
+}
+
+static int tegra20_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ int divider_u71;
+ u32 new_val;
+ u32 val;
+
+ pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+ if (c->flags & DIV_U71) {
+ divider_u71 = clk_div71_get_divider(parent_rate, rate);
+ if (divider_u71 >= 0) {
+ spin_lock_irqsave(&clock_register_lock, flags);
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+ if (c->flags & DIV_U71_FIXED)
+ new_val |= PLL_OUT_OVERRIDE;
+ new_val &= ~PLL_OUT_RATIO_MASK;
+ new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel(val, c->reg);
+ c->div = divider_u71 + 2;
+ c->mul = 2;
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+ return 0;
+ }
+ } else if (c->flags & DIV_2) {
+ if (parent_rate == rate * 2)
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static long tegra20_pll_div_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long parent_rate = *prate;
+ int divider;
+
+ pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(parent_rate, rate);
+ if (divider < 0)
+ return divider;
+ return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+ } else if (c->flags & DIV_2) {
+ return DIV_ROUND_UP(parent_rate, 2);
+ }
+ return -EINVAL;
+}
+
+struct clk_ops tegra_pll_div_ops = {
+ .is_enabled = tegra20_pll_div_clk_is_enabled,
+ .enable = tegra20_pll_div_clk_enable,
+ .disable = tegra20_pll_div_clk_disable,
+ .set_rate = tegra20_pll_div_clk_set_rate,
+ .round_rate = tegra20_pll_div_clk_round_rate,
+ .recalc_rate = tegra20_pll_div_clk_recalc_rate,
+};
+
+/* Periph clk ops */
+
+static int tegra20_periph_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ c->state = ON;
+
+ if (!c->u.periph.clk_num)
+ goto out;
+
+ if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+ PERIPH_CLK_TO_ENB_BIT(c)))
+ c->state = OFF;
+
+ if (!(c->flags & PERIPH_NO_RESET))
+ if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
+ PERIPH_CLK_TO_ENB_BIT(c))
+ c->state = OFF;
+
+out:
+ return c->state;
+}
+
+static int tegra20_periph_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+ u32 val;
+
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ if (!c->u.periph.clk_num)
+ return 0;
+
+ tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+ if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
+ return 0;
+
+ spin_lock_irqsave(&clock_register_lock, flags);
+
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+ if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+ if (c->flags & PERIPH_EMC_ENB) {
+ /* The EMC peripheral clock has 2 extra enable bits */
+ /* FIXME: Do they need to be disabled? */
+ val = clk_readl(c->reg);
+ val |= 0x3 << 24;
+ clk_writel(val, c->reg);
+ }
+
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+
+ return 0;
+}
+
+static void tegra20_periph_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long flags;
+
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+ if (!c->u.periph.clk_num)
+ return;
+
+ tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+ if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0)
+ return;
+
+ spin_lock_irqsave(&clock_register_lock, flags);
+
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+
+ spin_unlock_irqrestore(&clock_register_lock, flags);
+}
+
+void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
+
+ pr_debug("%s %s on clock %s\n", __func__,
+ assert ? "assert" : "deassert", __clk_get_name(hw->clk));
+
+ BUG_ON(!c->u.periph.clk_num);
+
+ if (!(c->flags & PERIPH_NO_RESET))
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ base + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+static int tegra20_periph_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+ u32 mask;
+ u32 shift;
+
+ pr_debug("%s: %s %d\n", __func__, __clk_get_name(hw->clk), index);
+
+ if (c->flags & MUX_PWM) {
+ shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+ mask = PERIPH_CLK_SOURCE_PWM_MASK;
+ } else {
+ shift = PERIPH_CLK_SOURCE_SHIFT;
+ mask = PERIPH_CLK_SOURCE_MASK;
+ }
+
+ val = clk_readl(c->reg);
+ val &= ~mask;
+ val |= (index) << shift;
+
+ clk_writel(val, c->reg);
+
+ return 0;
+}
+
+static u8 tegra20_periph_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+ u32 mask;
+ u32 shift;
+
+ if (c->flags & MUX_PWM) {
+ shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+ mask = PERIPH_CLK_SOURCE_PWM_MASK;
+ } else {
+ shift = PERIPH_CLK_SOURCE_SHIFT;
+ mask = PERIPH_CLK_SOURCE_MASK;
+ }
+
+ if (c->flags & MUX)
+ return (val & mask) >> shift;
+ else
+ return 0;
+}
+
+static unsigned long tegra20_periph_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long rate = prate;
+ u32 val = clk_readl(c->reg);
+
+ if (c->flags & DIV_U71) {
+ u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+ c->div = divu71 + 2;
+ c->mul = 2;
+ } else if (c->flags & DIV_U16) {
+ u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+ c->div = divu16 + 1;
+ c->mul = 1;
+ } else {
+ c->div = 1;
+ c->mul = 1;
+ return rate;
+ }
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+static int tegra20_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+ int divider;
+
+ val = clk_readl(c->reg);
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(parent_rate, rate);
+
+ if (divider >= 0) {
+ val = clk_readl(c->reg);
+ val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
+ val |= divider;
+ clk_writel(val, c->reg);
+ c->div = divider + 2;
+ c->mul = 2;
+ return 0;
+ }
+ } else if (c->flags & DIV_U16) {
+ divider = clk_div16_get_divider(parent_rate, rate);
+ if (divider >= 0) {
+ val = clk_readl(c->reg);
+ val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
+ val |= divider;
+ clk_writel(val, c->reg);
+ c->div = divider + 1;
+ c->mul = 1;
+ return 0;
+ }
+ } else if (parent_rate <= rate) {
+ c->div = 1;
+ c->mul = 1;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static long tegra20_periph_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long *prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+ int divider;
+
+ pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+ if (prate)
+ parent_rate = *prate;
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(parent_rate, rate);
+ if (divider < 0)
+ return divider;
+
+ return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+ } else if (c->flags & DIV_U16) {
+ divider = clk_div16_get_divider(parent_rate, rate);
+ if (divider < 0)
+ return divider;
+ return DIV_ROUND_UP(parent_rate, divider + 1);
+ }
+ return -EINVAL;
+}
+
+struct clk_ops tegra_periph_clk_ops = {
+ .is_enabled = tegra20_periph_clk_is_enabled,
+ .enable = tegra20_periph_clk_enable,
+ .disable = tegra20_periph_clk_disable,
+ .set_parent = tegra20_periph_clk_set_parent,
+ .get_parent = tegra20_periph_clk_get_parent,
+ .set_rate = tegra20_periph_clk_set_rate,
+ .round_rate = tegra20_periph_clk_round_rate,
+ .recalc_rate = tegra20_periph_clk_recalc_rate,
+};
+
+/* External memory controller clock ops */
+static void tegra20_emc_clk_init(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ c->max_rate = __clk_get_rate(hw->clk);
+}
+
+static long tegra20_emc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ long emc_rate;
+ long clk_rate;
+
+ /*
+ * The slowest entry in the EMC clock table that is at least as
+ * fast as rate.
+ */
+ emc_rate = tegra_emc_round_rate(rate);
+ if (emc_rate < 0)
+ return c->max_rate;
+
+ /*
+ * The fastest rate the PLL will generate that is at most the
+ * requested rate.
+ */
+ clk_rate = tegra20_periph_clk_round_rate(hw, emc_rate, NULL);
+
+ /*
+ * If this fails, and emc_rate > clk_rate, it's because the maximum
+ * rate in the EMC tables is larger than the maximum rate of the EMC
+ * clock. The EMC clock's max rate is the rate it was running when the
+ * kernel booted. Such a mismatch is probably due to using the wrong
+ * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
+ */
+ WARN_ONCE(emc_rate != clk_rate,
+ "emc_rate %ld != clk_rate %ld",
+ emc_rate, clk_rate);
+
+ return emc_rate;
+}
+
+static int tegra20_emc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int ret;
+
+ /*
+ * The Tegra2 memory controller has an interlock with the clock
+ * block that allows memory shadowed registers to be updated,
+ * and then transfer them to the main registers at the same
+ * time as the clock update without glitches.
+ */
+ ret = tegra_emc_set_rate(rate);
+ if (ret < 0)
+ return ret;
+
+ ret = tegra20_periph_clk_set_rate(hw, rate, parent_rate);
+ udelay(1);
+
+ return ret;
+}
+
+struct clk_ops tegra_emc_clk_ops = {
+ .init = tegra20_emc_clk_init,
+ .is_enabled = tegra20_periph_clk_is_enabled,
+ .enable = tegra20_periph_clk_enable,
+ .disable = tegra20_periph_clk_disable,
+ .set_parent = tegra20_periph_clk_set_parent,
+ .get_parent = tegra20_periph_clk_get_parent,
+ .set_rate = tegra20_emc_clk_set_rate,
+ .round_rate = tegra20_emc_clk_round_rate,
+ .recalc_rate = tegra20_periph_clk_recalc_rate,
+};
+
+/* Clock doubler ops */
+static int tegra20_clk_double_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ c->state = ON;
+
+ if (!c->u.periph.clk_num)
+ goto out;
+
+ if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+ PERIPH_CLK_TO_ENB_BIT(c)))
+ c->state = OFF;
+
+out:
+ return c->state;
+};
+
+static unsigned long tegra20_clk_double_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = prate;
+
+ c->mul = 2;
+ c->div = 1;
+
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+
+ return rate;
+}
+
+static long tegra20_clk_double_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long output_rate = *prate;
+
+ do_div(output_rate, 2);
+ return output_rate;
+}
+
+static int tegra20_clk_double_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ if (rate != 2 * parent_rate)
+ return -EINVAL;
+ return 0;
+}
+
+struct clk_ops tegra_clk_double_ops = {
+ .is_enabled = tegra20_clk_double_is_enabled,
+ .enable = tegra20_periph_clk_enable,
+ .disable = tegra20_periph_clk_disable,
+ .set_rate = tegra20_clk_double_set_rate,
+ .recalc_rate = tegra20_clk_double_recalc_rate,
+ .round_rate = tegra20_clk_double_round_rate,
+};
+
+/* Audio sync clock ops */
+static int tegra20_audio_sync_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+
+ c->state = (val & (1<<4)) ? OFF : ON;
+ return c->state;
+}
+
+static int tegra20_audio_sync_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ clk_writel(0, c->reg);
+ return 0;
+}
+
+static void tegra20_audio_sync_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ clk_writel(1, c->reg);
+}
+
+static u8 tegra20_audio_sync_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+ int source;
+
+ source = val & 0xf;
+ return source;
+}
+
+static int tegra20_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ val = clk_readl(c->reg);
+ val &= ~0xf;
+ val |= index;
+
+ clk_writel(val, c->reg);
+
+ return 0;
+}
+
+struct clk_ops tegra_audio_sync_clk_ops = {
+ .is_enabled = tegra20_audio_sync_clk_is_enabled,
+ .enable = tegra20_audio_sync_clk_enable,
+ .disable = tegra20_audio_sync_clk_disable,
+ .set_parent = tegra20_audio_sync_clk_set_parent,
+ .get_parent = tegra20_audio_sync_clk_get_parent,
+};
+
+/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */
+
+static int tegra20_cdev_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ /* We could un-tristate the cdev1 or cdev2 pingroup here; this is
+ * currently done in the pinmux code. */
+ c->state = ON;
+
+ BUG_ON(!c->u.periph.clk_num);
+
+ if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+ PERIPH_CLK_TO_ENB_BIT(c)))
+ c->state = OFF;
+ return c->state;
+}
+
+static int tegra20_cdev_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ BUG_ON(!c->u.periph.clk_num);
+
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+ return 0;
+}
+
+static void tegra20_cdev_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ BUG_ON(!c->u.periph.clk_num);
+
+ clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+ CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+static unsigned long tegra20_cdev_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra_cdev_clk_ops = {
+ .is_enabled = tegra20_cdev_clk_is_enabled,
+ .enable = tegra20_cdev_clk_enable,
+ .disable = tegra20_cdev_clk_disable,
+ .recalc_rate = tegra20_cdev_recalc_rate,
+};
+
+/* Tegra20 CPU clock and reset control functions */
+static void tegra20_wait_cpu_in_reset(u32 cpu)
+{
+ unsigned int reg;
+
+ do {
+ reg = readl(reg_clk_base +
+ TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ cpu_relax();
+ } while (!(reg & (1 << cpu))); /* check CPU been reset or not */
+
+ return;
+}
+
+static void tegra20_put_cpu_in_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ dmb();
+}
+
+static void tegra20_cpu_out_of_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+ wmb();
+}
+
+static void tegra20_enable_cpu_clock(u32 cpu)
+{
+ unsigned int reg;
+
+ reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg & ~CPU_CLOCK(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ barrier();
+ reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static void tegra20_disable_cpu_clock(u32 cpu)
+{
+ unsigned int reg;
+
+ reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg | CPU_CLOCK(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static struct tegra_cpu_car_ops tegra20_cpu_car_ops = {
+ .wait_for_reset = tegra20_wait_cpu_in_reset,
+ .put_in_reset = tegra20_put_cpu_in_reset,
+ .out_of_reset = tegra20_cpu_out_of_reset,
+ .enable_clock = tegra20_enable_cpu_clock,
+ .disable_clock = tegra20_disable_cpu_clock,
+};
+
+void __init tegra20_cpu_car_ops_init(void)
+{
+ tegra_cpu_car_ops = &tegra20_cpu_car_ops;
+}
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA20_CLOCK_H
+#define __MACH_TEGRA20_CLOCK_H
+
+extern struct clk_ops tegra_clk_32k_ops;
+extern struct clk_ops tegra_pll_ops;
+extern struct clk_ops tegra_clk_m_ops;
+extern struct clk_ops tegra_pll_div_ops;
+extern struct clk_ops tegra_pllx_ops;
+extern struct clk_ops tegra_plle_ops;
+extern struct clk_ops tegra_clk_double_ops;
+extern struct clk_ops tegra_cdev_clk_ops;
+extern struct clk_ops tegra_audio_sync_clk_ops;
+extern struct clk_ops tegra_super_ops;
+extern struct clk_ops tegra_cpu_ops;
+extern struct clk_ops tegra_twd_ops;
+extern struct clk_ops tegra_cop_ops;
+extern struct clk_ops tegra_bus_ops;
+extern struct clk_ops tegra_blink_clk_ops;
+extern struct clk_ops tegra_emc_clk_ops;
+extern struct clk_ops tegra_periph_clk_ops;
+extern struct clk_ops tegra_clk_shared_bus_ops;
+
+void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert);
+void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert);
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-tegra/tegra2_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-private.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/iomap.h>
+#include <mach/suspend.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra2_emc.h"
+#include "tegra20_clocks.h"
+#include "tegra_cpu_car.h"
+
+/* Clock definitions */
+
+#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags, \
+ _parent_names, _parents, _parent) \
+ static struct clk tegra_##_name = { \
+ .hw = &tegra_##_name##_hw.hw, \
+ .name = #_name, \
+ .rate = _rate, \
+ .ops = _ops, \
+ .flags = _flags, \
+ .parent_names = _parent_names, \
+ .parents = _parents, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .parent = _parent, \
+ };
+
+static struct clk tegra_clk_32k;
+static struct clk_tegra tegra_clk_32k_hw = {
+ .hw = {
+ .clk = &tegra_clk_32k,
+ },
+ .fixed_rate = 32768,
+};
+
+static struct clk tegra_clk_32k = {
+ .name = "clk_32k",
+ .rate = 32768,
+ .ops = &tegra_clk_32k_ops,
+ .hw = &tegra_clk_32k_hw.hw,
+ .flags = CLK_IS_ROOT,
+};
+
+static struct clk tegra_clk_m;
+static struct clk_tegra tegra_clk_m_hw = {
+ .hw = {
+ .clk = &tegra_clk_m,
+ },
+ .flags = ENABLE_ON_INIT,
+ .reg = 0x1fc,
+ .reg_shift = 28,
+ .max_rate = 26000000,
+ .fixed_rate = 0,
+};
+
+static struct clk tegra_clk_m = {
+ .name = "clk_m",
+ .ops = &tegra_clk_m_ops,
+ .hw = &tegra_clk_m_hw.hw,
+ .flags = CLK_IS_ROOT,
+};
+
+#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min, \
+ _input_max, _cf_min, _cf_max, _vco_min, \
+ _vco_max, _freq_table, _lock_delay, _ops, \
+ _fixed_rate, _parent) \
+ static const char *tegra_##_name##_parent_names[] = { \
+ #_parent, \
+ }; \
+ static struct clk *tegra_##_name##_parents[] = { \
+ &tegra_##_parent, \
+ }; \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .flags = _flags, \
+ .reg = _reg, \
+ .max_rate = _max_rate, \
+ .u.pll = { \
+ .input_min = _input_min, \
+ .input_max = _input_max, \
+ .cf_min = _cf_min, \
+ .cf_max = _cf_max, \
+ .vco_min = _vco_min, \
+ .vco_max = _vco_max, \
+ .freq_table = _freq_table, \
+ .lock_delay = _lock_delay, \
+ .fixed_rate = _fixed_rate, \
+ }, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent = &tegra_##_parent, \
+ .parent_names = tegra_##_name##_parent_names, \
+ .parents = tegra_##_name##_parents, \
+ .num_parents = 1, \
+ };
+
+#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift, \
+ _max_rate, _ops, _parent, _clk_flags) \
+ static const char *tegra_##_name##_parent_names[] = { \
+ #_parent, \
+ }; \
+ static struct clk *tegra_##_name##_parents[] = { \
+ &tegra_##_parent, \
+ }; \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .flags = _flags, \
+ .reg = _reg, \
+ .max_rate = _max_rate, \
+ .reg_shift = _reg_shift, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &tegra_pll_div_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent = &tegra_##_parent, \
+ .parent_names = tegra_##_name##_parent_names, \
+ .parents = tegra_##_name##_parents, \
+ .num_parents = 1, \
+ .flags = _clk_flags, \
+ };
+
+
+static struct clk_pll_freq_table tegra_pll_s_freq_table[] = {
+ {32768, 12000000, 366, 1, 1, 0},
+ {32768, 13000000, 397, 1, 1, 0},
+ {32768, 19200000, 586, 1, 1, 0},
+ {32768, 26000000, 793, 1, 1, 0},
+ {0, 0, 0, 0, 0, 0},
+};
+
+DEFINE_PLL(pll_s, PLL_ALT_MISC_REG, 0xf0, 26000000, 32768, 32768, 0,
+ 0, 12000000, 26000000, tegra_pll_s_freq_table, 300,
+ tegra_pll_ops, 0, clk_32k);
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+ { 12000000, 600000000, 600, 12, 1, 8 },
+ { 13000000, 600000000, 600, 13, 1, 8 },
+ { 19200000, 600000000, 500, 16, 1, 6 },
+ { 26000000, 600000000, 600, 26, 1, 8 },
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 600000000, 2000000, 31000000, 1000000,
+ 6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300,
+ tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 600000000,
+ tegra_pll_div_ops, pll_c, 0);
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+ { 12000000, 666000000, 666, 12, 1, 8},
+ { 13000000, 666000000, 666, 13, 1, 8},
+ { 19200000, 666000000, 555, 16, 1, 8},
+ { 26000000, 666000000, 666, 26, 1, 8},
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_m, PLL_HAS_CPCON, 0x90, 800000000, 2000000, 31000000, 1000000,
+ 6000000, 20000000, 1200000000, tegra_pll_m_freq_table, 300,
+ tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000,
+ tegra_pll_div_ops, pll_m, 0);
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+ { 12000000, 216000000, 432, 12, 2, 8},
+ { 13000000, 216000000, 432, 13, 2, 8},
+ { 19200000, 216000000, 90, 4, 2, 1},
+ { 26000000, 216000000, 432, 26, 2, 8},
+ { 12000000, 432000000, 432, 12, 1, 8},
+ { 13000000, 432000000, 432, 13, 1, 8},
+ { 19200000, 432000000, 90, 4, 1, 1},
+ { 26000000, 432000000, 432, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+
+DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000,
+ 2000000, 31000000, 1000000, 6000000, 20000000, 1400000000,
+ tegra_pll_p_freq_table, 300, tegra_pll_ops, 216000000, clk_m);
+
+DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 0,
+ 432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 16,
+ 432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 0,
+ 432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 16,
+ 432000000, tegra_pll_div_ops, pll_p, 0);
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+ { 28800000, 56448000, 49, 25, 1, 1},
+ { 28800000, 73728000, 64, 25, 1, 1},
+ { 28800000, 24000000, 5, 6, 1, 1},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 73728000, 2000000, 31000000, 1000000,
+ 6000000, 20000000, 1400000000, tegra_pll_a_freq_table, 300,
+ tegra_pll_ops, 0, pll_p_out1);
+
+DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 73728000,
+ tegra_pll_div_ops, pll_a, 0);
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+ { 12000000, 216000000, 216, 12, 1, 4},
+ { 13000000, 216000000, 216, 13, 1, 4},
+ { 19200000, 216000000, 135, 12, 1, 3},
+ { 26000000, 216000000, 216, 26, 1, 4},
+
+ { 12000000, 594000000, 594, 12, 1, 8},
+ { 13000000, 594000000, 594, 13, 1, 8},
+ { 19200000, 594000000, 495, 16, 1, 8},
+ { 26000000, 594000000, 594, 26, 1, 8},
+
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000,
+ 1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table,
+ 1000, tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000,
+ tegra_pll_div_ops, pll_d, CLK_SET_RATE_PARENT);
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+ { 12000000, 480000000, 960, 12, 2, 0},
+ { 13000000, 480000000, 960, 13, 2, 0},
+ { 19200000, 480000000, 200, 4, 2, 0},
+ { 26000000, 480000000, 960, 26, 2, 0},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_u, PLLU, 0xc0, 480000000, 2000000, 40000000, 1000000, 6000000,
+ 48000000, 960000000, tegra_pll_u_freq_table, 1000,
+ tegra_pll_ops, 0, clk_m);
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+ /* 1 GHz */
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ /* 912 MHz */
+ { 12000000, 912000000, 912, 12, 1, 12},
+ { 13000000, 912000000, 912, 13, 1, 12},
+ { 19200000, 912000000, 760, 16, 1, 8},
+ { 26000000, 912000000, 912, 26, 1, 12},
+
+ /* 816 MHz */
+ { 12000000, 816000000, 816, 12, 1, 12},
+ { 13000000, 816000000, 816, 13, 1, 12},
+ { 19200000, 816000000, 680, 16, 1, 8},
+ { 26000000, 816000000, 816, 26, 1, 12},
+
+ /* 760 MHz */
+ { 12000000, 760000000, 760, 12, 1, 12},
+ { 13000000, 760000000, 760, 13, 1, 12},
+ { 19200000, 760000000, 950, 24, 1, 8},
+ { 26000000, 760000000, 760, 26, 1, 12},
+
+ /* 750 MHz */
+ { 12000000, 750000000, 750, 12, 1, 12},
+ { 13000000, 750000000, 750, 13, 1, 12},
+ { 19200000, 750000000, 625, 16, 1, 8},
+ { 26000000, 750000000, 750, 26, 1, 12},
+
+ /* 608 MHz */
+ { 12000000, 608000000, 608, 12, 1, 12},
+ { 13000000, 608000000, 608, 13, 1, 12},
+ { 19200000, 608000000, 380, 12, 1, 8},
+ { 26000000, 608000000, 608, 26, 1, 12},
+
+ /* 456 MHz */
+ { 12000000, 456000000, 456, 12, 1, 12},
+ { 13000000, 456000000, 456, 13, 1, 12},
+ { 19200000, 456000000, 380, 16, 1, 8},
+ { 26000000, 456000000, 456, 26, 1, 12},
+
+ /* 312 MHz */
+ { 12000000, 312000000, 312, 12, 1, 12},
+ { 13000000, 312000000, 312, 13, 1, 12},
+ { 19200000, 312000000, 260, 16, 1, 8},
+ { 26000000, 312000000, 312, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG, 0xe0, 1000000000, 2000000,
+ 31000000, 1000000, 6000000, 20000000, 1200000000,
+ tegra_pll_x_freq_table, 300, tegra_pllx_ops, 0, clk_m);
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+ { 12000000, 100000000, 200, 24, 1, 0 },
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 12000000, 12000000, 0, 0,
+ 0, 0, tegra_pll_e_freq_table, 0, tegra_plle_ops, 0, clk_m);
+
+static const char *tegra_common_parent_names[] = {
+ "clk_m",
+};
+
+static struct clk *tegra_common_parents[] = {
+ &tegra_clk_m,
+};
+
+static struct clk tegra_clk_d;
+static struct clk_tegra tegra_clk_d_hw = {
+ .hw = {
+ .clk = &tegra_clk_d,
+ },
+ .flags = PERIPH_NO_RESET,
+ .reg = 0x34,
+ .reg_shift = 12,
+ .max_rate = 52000000,
+ .u.periph = {
+ .clk_num = 90,
+ },
+};
+
+static struct clk tegra_clk_d = {
+ .name = "clk_d",
+ .hw = &tegra_clk_d_hw.hw,
+ .ops = &tegra_clk_double_ops,
+ .parent = &tegra_clk_m,
+ .parent_names = tegra_common_parent_names,
+ .parents = tegra_common_parents,
+ .num_parents = ARRAY_SIZE(tegra_common_parent_names),
+};
+
+static struct clk tegra_cdev1;
+static struct clk_tegra tegra_cdev1_hw = {
+ .hw = {
+ .clk = &tegra_cdev1,
+ },
+ .fixed_rate = 26000000,
+ .u.periph = {
+ .clk_num = 94,
+ },
+};
+static struct clk tegra_cdev1 = {
+ .name = "cdev1",
+ .hw = &tegra_cdev1_hw.hw,
+ .ops = &tegra_cdev_clk_ops,
+ .flags = CLK_IS_ROOT,
+};
+
+/* dap_mclk2, belongs to the cdev2 pingroup. */
+static struct clk tegra_cdev2;
+static struct clk_tegra tegra_cdev2_hw = {
+ .hw = {
+ .clk = &tegra_cdev2,
+ },
+ .fixed_rate = 26000000,
+ .u.periph = {
+ .clk_num = 93,
+ },
+};
+static struct clk tegra_cdev2 = {
+ .name = "cdev2",
+ .hw = &tegra_cdev2_hw.hw,
+ .ops = &tegra_cdev_clk_ops,
+ .flags = CLK_IS_ROOT,
+};
+
+/* initialized before peripheral clocks */
+static struct clk_mux_sel mux_audio_sync_clk[8+1];
+static const struct audio_sources {
+ const char *name;
+ int value;
+} mux_audio_sync_clk_sources[] = {
+ { .name = "spdif_in", .value = 0 },
+ { .name = "i2s1", .value = 1 },
+ { .name = "i2s2", .value = 2 },
+ { .name = "pll_a_out0", .value = 4 },
+#if 0 /* FIXME: not implemented */
+ { .name = "ac97", .value = 3 },
+ { .name = "ext_audio_clk2", .value = 5 },
+ { .name = "ext_audio_clk1", .value = 6 },
+ { .name = "ext_vimclk", .value = 7 },
+#endif
+ { NULL, 0 }
+};
+
+static const char *audio_parent_names[] = {
+ "spdif_in",
+ "i2s1",
+ "i2s2",
+ "dummy",
+ "pll_a_out0",
+ "dummy",
+ "dummy",
+ "dummy",
+};
+
+static struct clk *audio_parents[] = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+};
+
+static struct clk tegra_audio;
+static struct clk_tegra tegra_audio_hw = {
+ .hw = {
+ .clk = &tegra_audio,
+ },
+ .reg = 0x38,
+ .max_rate = 73728000,
+};
+DEFINE_CLK_TEGRA(audio, 0, &tegra_audio_sync_clk_ops, 0, audio_parent_names,
+ audio_parents, NULL);
+
+static const char *audio_2x_parent_names[] = {
+ "audio",
+};
+
+static struct clk *audio_2x_parents[] = {
+ &tegra_audio,
+};
+
+static struct clk tegra_audio_2x;
+static struct clk_tegra tegra_audio_2x_hw = {
+ .hw = {
+ .clk = &tegra_audio_2x,
+ },
+ .flags = PERIPH_NO_RESET,
+ .max_rate = 48000000,
+ .reg = 0x34,
+ .reg_shift = 8,
+ .u.periph = {
+ .clk_num = 89,
+ },
+};
+DEFINE_CLK_TEGRA(audio_2x, 0, &tegra_clk_double_ops, 0, audio_2x_parent_names,
+ audio_2x_parents, &tegra_audio);
+
+static struct clk_lookup tegra_audio_clk_lookups[] = {
+ { .con_id = "audio", .clk = &tegra_audio },
+ { .con_id = "audio_2x", .clk = &tegra_audio_2x }
+};
+
+/* This is called after peripheral clocks are initialized, as the
+ * audio_sync clock depends on some of the peripheral clocks.
+ */
+
+static void init_audio_sync_clock_mux(void)
+{
+ int i;
+ struct clk_mux_sel *sel = mux_audio_sync_clk;
+ const struct audio_sources *src = mux_audio_sync_clk_sources;
+ struct clk_lookup *lookup;
+
+ for (i = 0; src->name; i++, sel++, src++) {
+ sel->input = tegra_get_clock_by_name(src->name);
+ if (!sel->input)
+ pr_err("%s: could not find clk %s\n", __func__,
+ src->name);
+ audio_parents[src->value] = sel->input;
+ sel->value = src->value;
+ }
+
+ lookup = tegra_audio_clk_lookups;
+ for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
+ struct clk *c = lookup->clk;
+ struct clk_tegra *clk = to_clk_tegra(c->hw);
+ __clk_init(NULL, c);
+ INIT_LIST_HEAD(&clk->shared_bus_list);
+ clk->lookup.con_id = lookup->con_id;
+ clk->lookup.clk = c;
+ clkdev_add(&clk->lookup);
+ tegra_clk_add(c);
+ }
+}
+
+static const char *mux_cclk[] = {
+ "clk_m",
+ "pll_c",
+ "clk_32k",
+ "pll_m",
+ "pll_p",
+ "pll_p_out4",
+ "pll_p_out3",
+ "clk_d",
+ "pll_x",
+};
+
+
+static struct clk *mux_cclk_p[] = {
+ &tegra_clk_m,
+ &tegra_pll_c,
+ &tegra_clk_32k,
+ &tegra_pll_m,
+ &tegra_pll_p,
+ &tegra_pll_p_out4,
+ &tegra_pll_p_out3,
+ &tegra_clk_d,
+ &tegra_pll_x,
+};
+
+static const char *mux_sclk[] = {
+ "clk_m",
+ "pll_c_out1",
+ "pll_p_out4",
+ "pllp_p_out3",
+ "pll_p_out2",
+ "clk_d",
+ "clk_32k",
+ "pll_m_out1",
+};
+
+static struct clk *mux_sclk_p[] = {
+ &tegra_clk_m,
+ &tegra_pll_c_out1,
+ &tegra_pll_p_out4,
+ &tegra_pll_p_out3,
+ &tegra_pll_p_out2,
+ &tegra_clk_d,
+ &tegra_clk_32k,
+ &tegra_pll_m_out1,
+};
+
+static struct clk tegra_cclk;
+static struct clk_tegra tegra_cclk_hw = {
+ .hw = {
+ .clk = &tegra_cclk,
+ },
+ .reg = 0x20,
+ .max_rate = 1000000000,
+};
+DEFINE_CLK_TEGRA(cclk, 0, &tegra_super_ops, 0, mux_cclk,
+ mux_cclk_p, NULL);
+
+static const char *mux_twd[] = {
+ "cclk",
+};
+
+static struct clk *mux_twd_p[] = {
+ &tegra_cclk,
+};
+
+static struct clk tegra_clk_twd;
+static struct clk_tegra tegra_clk_twd_hw = {
+ .hw = {
+ .clk = &tegra_clk_twd,
+ },
+ .max_rate = 1000000000,
+ .mul = 1,
+ .div = 4,
+};
+
+static struct clk tegra_clk_twd = {
+ .name = "twd",
+ .ops = &tegra_twd_ops,
+ .hw = &tegra_clk_twd_hw.hw,
+ .parent = &tegra_cclk,
+ .parent_names = mux_twd,
+ .parents = mux_twd_p,
+ .num_parents = ARRAY_SIZE(mux_twd),
+};
+
+static struct clk tegra_sclk;
+static struct clk_tegra tegra_sclk_hw = {
+ .hw = {
+ .clk = &tegra_sclk,
+ },
+ .reg = 0x28,
+ .max_rate = 240000000,
+ .min_rate = 120000000,
+};
+DEFINE_CLK_TEGRA(sclk, 0, &tegra_super_ops, 0, mux_sclk,
+ mux_sclk_p, NULL);
+
+static const char *tegra_cop_parent_names[] = {
+ "tegra_sclk",
+};
+
+static struct clk *tegra_cop_parents[] = {
+ &tegra_sclk,
+};
+
+static struct clk tegra_cop;
+static struct clk_tegra tegra_cop_hw = {
+ .hw = {
+ .clk = &tegra_cop,
+ },
+ .max_rate = 240000000,
+ .reset = &tegra2_cop_clk_reset,
+};
+DEFINE_CLK_TEGRA(cop, 0, &tegra_cop_ops, CLK_SET_RATE_PARENT,
+ tegra_cop_parent_names, tegra_cop_parents, &tegra_sclk);
+
+static const char *tegra_hclk_parent_names[] = {
+ "tegra_sclk",
+};
+
+static struct clk *tegra_hclk_parents[] = {
+ &tegra_sclk,
+};
+
+static struct clk tegra_hclk;
+static struct clk_tegra tegra_hclk_hw = {
+ .hw = {
+ .clk = &tegra_hclk,
+ },
+ .flags = DIV_BUS,
+ .reg = 0x30,
+ .reg_shift = 4,
+ .max_rate = 240000000,
+};
+DEFINE_CLK_TEGRA(hclk, 0, &tegra_bus_ops, 0, tegra_hclk_parent_names,
+ tegra_hclk_parents, &tegra_sclk);
+
+static const char *tegra_pclk_parent_names[] = {
+ "tegra_hclk",
+};
+
+static struct clk *tegra_pclk_parents[] = {
+ &tegra_hclk,
+};
+
+static struct clk tegra_pclk;
+static struct clk_tegra tegra_pclk_hw = {
+ .hw = {
+ .clk = &tegra_pclk,
+ },
+ .flags = DIV_BUS,
+ .reg = 0x30,
+ .reg_shift = 0,
+ .max_rate = 120000000,
+};
+DEFINE_CLK_TEGRA(pclk, 0, &tegra_bus_ops, 0, tegra_pclk_parent_names,
+ tegra_pclk_parents, &tegra_hclk);
+
+static const char *tegra_blink_parent_names[] = {
+ "clk_32k",
+};
+
+static struct clk *tegra_blink_parents[] = {
+ &tegra_clk_32k,
+};
+
+static struct clk tegra_blink;
+static struct clk_tegra tegra_blink_hw = {
+ .hw = {
+ .clk = &tegra_blink,
+ },
+ .reg = 0x40,
+ .max_rate = 32768,
+};
+DEFINE_CLK_TEGRA(blink, 0, &tegra_blink_clk_ops, 0, tegra_blink_parent_names,
+ tegra_blink_parents, &tegra_clk_32k);
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+ "pll_m",
+ "pll_c",
+ "pll_p",
+ "pll_a_out0",
+};
+
+static struct clk *mux_pllm_pllc_pllp_plla_p[] = {
+ &tegra_pll_m,
+ &tegra_pll_c,
+ &tegra_pll_p,
+ &tegra_pll_a_out0,
+};
+
+static const char *mux_pllm_pllc_pllp_clkm[] = {
+ "pll_m",
+ "pll_c",
+ "pll_p",
+ "clk_m",
+};
+
+static struct clk *mux_pllm_pllc_pllp_clkm_p[] = {
+ &tegra_pll_m,
+ &tegra_pll_c,
+ &tegra_pll_p,
+ &tegra_clk_m,
+};
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+ "pll_p",
+ "pll_c",
+ "pll_m",
+ "clk_m",
+};
+
+static struct clk *mux_pllp_pllc_pllm_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_pll_m,
+ &tegra_clk_m,
+};
+
+static const char *mux_pllaout0_audio2x_pllp_clkm[] = {
+ "pll_a_out0",
+ "audio_2x",
+ "pll_p",
+ "clk_m",
+};
+
+static struct clk *mux_pllaout0_audio2x_pllp_clkm_p[] = {
+ &tegra_pll_a_out0,
+ &tegra_audio_2x,
+ &tegra_pll_p,
+ &tegra_clk_m,
+};
+
+static const char *mux_pllp_plld_pllc_clkm[] = {
+ "pllp",
+ "pll_d_out0",
+ "pll_c",
+ "clk_m",
+};
+
+static struct clk *mux_pllp_plld_pllc_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_d_out0,
+ &tegra_pll_c,
+ &tegra_clk_m,
+};
+
+static const char *mux_pllp_pllc_audio_clkm_clk32[] = {
+ "pll_p",
+ "pll_c",
+ "audio",
+ "clk_m",
+ "clk_32k",
+};
+
+static struct clk *mux_pllp_pllc_audio_clkm_clk32_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_audio,
+ &tegra_clk_m,
+ &tegra_clk_32k,
+};
+
+static const char *mux_pllp_pllc_pllm[] = {
+ "pll_p",
+ "pll_c",
+ "pll_m"
+};
+
+static struct clk *mux_pllp_pllc_pllm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_pll_m,
+};
+
+static const char *mux_clk_m[] = {
+ "clk_m",
+};
+
+static struct clk *mux_clk_m_p[] = {
+ &tegra_clk_m,
+};
+
+static const char *mux_pllp_out3[] = {
+ "pll_p_out3",
+};
+
+static struct clk *mux_pllp_out3_p[] = {
+ &tegra_pll_p_out3,
+};
+
+static const char *mux_plld[] = {
+ "pll_d",
+};
+
+static struct clk *mux_plld_p[] = {
+ &tegra_pll_d,
+};
+
+static const char *mux_clk_32k[] = {
+ "clk_32k",
+};
+
+static struct clk *mux_clk_32k_p[] = {
+ &tegra_clk_32k,
+};
+
+static const char *mux_pclk[] = {
+ "pclk",
+};
+
+static struct clk *mux_pclk_p[] = {
+ &tegra_pclk,
+};
+
+static struct clk tegra_emc;
+static struct clk_tegra tegra_emc_hw = {
+ .hw = {
+ .clk = &tegra_emc,
+ },
+ .reg = 0x19c,
+ .max_rate = 800000000,
+ .flags = MUX | DIV_U71 | PERIPH_EMC_ENB,
+ .reset = &tegra2_periph_clk_reset,
+ .u.periph = {
+ .clk_num = 57,
+ },
+};
+DEFINE_CLK_TEGRA(emc, 0, &tegra_emc_clk_ops, 0, mux_pllm_pllc_pllp_clkm,
+ mux_pllm_pllc_pllp_clkm_p, NULL);
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, \
+ _max, _inputs, _flags) \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ .reg = _reg, \
+ .flags = _flags, \
+ .max_rate = _max, \
+ .u.periph = { \
+ .clk_num = _clk_num, \
+ }, \
+ .reset = tegra2_periph_clk_reset, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &tegra_periph_clk_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent_names = _inputs, \
+ .parents = _inputs##_p, \
+ .num_parents = ARRAY_SIZE(_inputs), \
+ };
+
+PERIPH_CLK(apbdma, "tegra-apbdma", NULL, 34, 0, 108000000, mux_pclk, 0);
+PERIPH_CLK(rtc, "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET);
+PERIPH_CLK(timer, "timer", NULL, 5, 0, 26000000, mux_clk_m, 0);
+PERIPH_CLK(i2s1, "tegra20-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(i2s2, "tegra20-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(spdif_out, "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(spdif_in, "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71);
+PERIPH_CLK(pwm, "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71 | MUX_PWM);
+PERIPH_CLK(spi, "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(xio, "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(twc, "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sbc1, "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sbc2, "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sbc3, "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sbc4, "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(ide, "ide", NULL, 25, 0x144, 100000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(ndflash, "tegra_nand", NULL, 13, 0x160, 164000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vfir, "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sdmmc1, "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc2, "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc3, "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc4, "sdhci-tegra.3", NULL, 15, 0x164, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vcp, "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(bsea, "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(bsev, "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(vde, "tegra-avp", "vde", 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(csite, "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* max rate ??? */
+/* FIXME: what is la? */
+PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(dvc, "tegra-i2c.3", NULL, 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c1_i2c, "tegra-i2c.0", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(i2c2_i2c, "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(i2c3_i2c, "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(dvc_i2c, "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
+PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
+PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
+PERIPH_CLK(uartd, "tegra-uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
+PERIPH_CLK(uarte, "tegra-uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
+PERIPH_CLK(3d, "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET); /* scales with voltage and process_id */
+PERIPH_CLK(2d, "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(vi, "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(vi_sensor, "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET); /* scales with voltage and process_id */
+PERIPH_CLK(epp, "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(mpe, "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(host1x, "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(cve, "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvo, "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(hdmi, "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvdac, "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(disp1, "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
+PERIPH_CLK(disp2, "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
+PERIPH_CLK(usbd, "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(usb2, "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(usb3, "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(dsi, "dsi", NULL, 48, 0, 500000000, mux_plld, 0); /* scales with voltage */
+PERIPH_CLK(csi, "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(isp, "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0); /* same frequency as VI */
+PERIPH_CLK(csus, "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET);
+PERIPH_CLK(pex, NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET);
+PERIPH_CLK(afi, NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET);
+PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET);
+
+static struct clk *tegra_list_clks[] = {
+ &tegra_apbdma,
+ &tegra_rtc,
+ &tegra_i2s1,
+ &tegra_i2s2,
+ &tegra_spdif_out,
+ &tegra_spdif_in,
+ &tegra_pwm,
+ &tegra_spi,
+ &tegra_xio,
+ &tegra_twc,
+ &tegra_sbc1,
+ &tegra_sbc2,
+ &tegra_sbc3,
+ &tegra_sbc4,
+ &tegra_ide,
+ &tegra_ndflash,
+ &tegra_vfir,
+ &tegra_sdmmc1,
+ &tegra_sdmmc2,
+ &tegra_sdmmc3,
+ &tegra_sdmmc4,
+ &tegra_vcp,
+ &tegra_bsea,
+ &tegra_bsev,
+ &tegra_vde,
+ &tegra_csite,
+ &tegra_la,
+ &tegra_owr,
+ &tegra_nor,
+ &tegra_mipi,
+ &tegra_i2c1,
+ &tegra_i2c2,
+ &tegra_i2c3,
+ &tegra_dvc,
+ &tegra_i2c1_i2c,
+ &tegra_i2c2_i2c,
+ &tegra_i2c3_i2c,
+ &tegra_dvc_i2c,
+ &tegra_uarta,
+ &tegra_uartb,
+ &tegra_uartc,
+ &tegra_uartd,
+ &tegra_uarte,
+ &tegra_3d,
+ &tegra_2d,
+ &tegra_vi,
+ &tegra_vi_sensor,
+ &tegra_epp,
+ &tegra_mpe,
+ &tegra_host1x,
+ &tegra_cve,
+ &tegra_tvo,
+ &tegra_hdmi,
+ &tegra_tvdac,
+ &tegra_disp1,
+ &tegra_disp2,
+ &tegra_usbd,
+ &tegra_usb2,
+ &tegra_usb3,
+ &tegra_dsi,
+ &tegra_csi,
+ &tegra_isp,
+ &tegra_csus,
+ &tegra_pex,
+ &tegra_afi,
+ &tegra_pcie_xclk,
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con) \
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ }
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration. List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+static struct clk_duplicate tegra_clk_duplicates[] = {
+ CLK_DUPLICATE("uarta", "serial8250.0", NULL),
+ CLK_DUPLICATE("uartb", "serial8250.1", NULL),
+ CLK_DUPLICATE("uartc", "serial8250.2", NULL),
+ CLK_DUPLICATE("uartd", "serial8250.3", NULL),
+ CLK_DUPLICATE("uarte", "serial8250.4", NULL),
+ CLK_DUPLICATE("usbd", "utmip-pad", NULL),
+ CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+ CLK_DUPLICATE("usbd", "tegra-otg", NULL),
+ CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
+ CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
+ CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
+ CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
+ CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
+ CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
+ CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"),
+ CLK_DUPLICATE("cop", "tegra-avp", "cop"),
+ CLK_DUPLICATE("vde", "tegra-aes", "vde"),
+ CLK_DUPLICATE("cclk", NULL, "cpu"),
+ CLK_DUPLICATE("twd", "smp_twd", NULL),
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }
+
+static struct clk *tegra_ptr_clks[] = {
+ &tegra_clk_32k,
+ &tegra_pll_s,
+ &tegra_clk_m,
+ &tegra_pll_m,
+ &tegra_pll_m_out1,
+ &tegra_pll_c,
+ &tegra_pll_c_out1,
+ &tegra_pll_p,
+ &tegra_pll_p_out1,
+ &tegra_pll_p_out2,
+ &tegra_pll_p_out3,
+ &tegra_pll_p_out4,
+ &tegra_pll_a,
+ &tegra_pll_a_out0,
+ &tegra_pll_d,
+ &tegra_pll_d_out0,
+ &tegra_pll_u,
+ &tegra_pll_x,
+ &tegra_pll_e,
+ &tegra_cclk,
+ &tegra_clk_twd,
+ &tegra_sclk,
+ &tegra_hclk,
+ &tegra_pclk,
+ &tegra_clk_d,
+ &tegra_cdev1,
+ &tegra_cdev2,
+ &tegra_blink,
+ &tegra_cop,
+ &tegra_emc,
+};
+
+static void tegra2_init_one_clock(struct clk *c)
+{
+ struct clk_tegra *clk = to_clk_tegra(c->hw);
+ int ret;
+
+ ret = __clk_init(NULL, c);
+ if (ret)
+ pr_err("clk init failed %s\n", __clk_get_name(c));
+
+ INIT_LIST_HEAD(&clk->shared_bus_list);
+ if (!clk->lookup.dev_id && !clk->lookup.con_id)
+ clk->lookup.con_id = c->name;
+ clk->lookup.clk = c;
+ clkdev_add(&clk->lookup);
+ tegra_clk_add(c);
+}
+
+void __init tegra2_init_clocks(void)
+{
+ int i;
+ struct clk *c;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+ tegra2_init_one_clock(tegra_ptr_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+ tegra2_init_one_clock(tegra_list_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+ c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+ if (!c) {
+ pr_err("%s: Unknown duplicate clock %s\n", __func__,
+ tegra_clk_duplicates[i].name);
+ continue;
+ }
+
+ tegra_clk_duplicates[i].lookup.clk = c;
+ clkdev_add(&tegra_clk_duplicates[i].lookup);
+ }
+
+ init_audio_sync_clock_mux();
+ tegra20_cpu_car_ops_init();
+}
+++ /dev/null
-/*
- * arch/arm/mach-tegra/tegra2_clocks.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "clock.h"
-#include "fuse.h"
-#include "tegra2_emc.h"
-
-#define RST_DEVICES 0x004
-#define RST_DEVICES_SET 0x300
-#define RST_DEVICES_CLR 0x304
-#define RST_DEVICES_NUM 3
-
-#define CLK_OUT_ENB 0x010
-#define CLK_OUT_ENB_SET 0x320
-#define CLK_OUT_ENB_CLR 0x324
-#define CLK_OUT_ENB_NUM 3
-
-#define CLK_MASK_ARM 0x44
-#define MISC_CLK_ENB 0x48
-
-#define OSC_CTRL 0x50
-#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
-#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30)
-#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30)
-#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30)
-#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_FREQ_DET 0x58
-#define OSC_FREQ_DET_TRIG (1<<31)
-
-#define OSC_FREQ_DET_STATUS 0x5C
-#define OSC_FREQ_DET_BUSY (1<<31)
-#define OSC_FREQ_DET_CNT_MASK 0xFFFF
-
-#define PERIPH_CLK_SOURCE_I2S1 0x100
-#define PERIPH_CLK_SOURCE_EMC 0x19c
-#define PERIPH_CLK_SOURCE_OSC 0x1fc
-#define PERIPH_CLK_SOURCE_NUM \
- ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
-
-#define PERIPH_CLK_SOURCE_MASK (3<<30)
-#define PERIPH_CLK_SOURCE_SHIFT 30
-#define PERIPH_CLK_SOURCE_PWM_MASK (7<<28)
-#define PERIPH_CLK_SOURCE_PWM_SHIFT 28
-#define PERIPH_CLK_SOURCE_ENABLE (1<<28)
-#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF
-#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
-#define PERIPH_CLK_SOURCE_DIV_SHIFT 0
-
-#define SDMMC_CLK_INT_FB_SEL (1 << 23)
-#define SDMMC_CLK_INT_FB_DLY_SHIFT 16
-#define SDMMC_CLK_INT_FB_DLY_MASK (0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
-
-#define PLL_BASE 0x0
-#define PLL_BASE_BYPASS (1<<31)
-#define PLL_BASE_ENABLE (1<<30)
-#define PLL_BASE_REF_ENABLE (1<<29)
-#define PLL_BASE_OVERRIDE (1<<28)
-#define PLL_BASE_DIVP_MASK (0x7<<20)
-#define PLL_BASE_DIVP_SHIFT 20
-#define PLL_BASE_DIVN_MASK (0x3FF<<8)
-#define PLL_BASE_DIVN_SHIFT 8
-#define PLL_BASE_DIVM_MASK (0x1F)
-#define PLL_BASE_DIVM_SHIFT 0
-
-#define PLL_OUT_RATIO_MASK (0xFF<<8)
-#define PLL_OUT_RATIO_SHIFT 8
-#define PLL_OUT_OVERRIDE (1<<2)
-#define PLL_OUT_CLKEN (1<<1)
-#define PLL_OUT_RESET_DISABLE (1<<0)
-
-#define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
-
-#define PLL_MISC_DCCON_SHIFT 20
-#define PLL_MISC_CPCON_SHIFT 8
-#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT)
-#define PLL_MISC_LFCON_SHIFT 4
-#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT)
-#define PLL_MISC_VCOCON_SHIFT 0
-#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT)
-
-#define PLLU_BASE_POST_DIV (1<<20)
-
-#define PLLD_MISC_CLKENABLE (1<<30)
-#define PLLD_MISC_DIV_RST (1<<23)
-#define PLLD_MISC_DCCON_SHIFT 12
-
-#define PLLE_MISC_READY (1 << 15)
-
-#define PERIPH_CLK_TO_ENB_REG(c) ((c->u.periph.clk_num / 32) * 4)
-#define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->u.periph.clk_num / 32) * 8)
-#define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->u.periph.clk_num % 32))
-
-#define SUPER_CLK_MUX 0x00
-#define SUPER_STATE_SHIFT 28
-#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT)
-#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT)
-#define SUPER_SOURCE_MASK 0xF
-#define SUPER_FIQ_SOURCE_SHIFT 12
-#define SUPER_IRQ_SOURCE_SHIFT 8
-#define SUPER_RUN_SOURCE_SHIFT 4
-#define SUPER_IDLE_SOURCE_SHIFT 0
-
-#define SUPER_CLK_DIVIDER 0x04
-
-#define BUS_CLK_DISABLE (1<<3)
-#define BUS_CLK_DIV_MASK 0x3
-
-#define PMC_CTRL 0x0
- #define PMC_CTRL_BLINK_ENB (1 << 7)
-
-#define PMC_DPD_PADS_ORIDE 0x1c
- #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20)
-
-#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0
-#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff
-#define PMC_BLINK_TIMER_ENB (1 << 15)
-#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16
-#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff
-
-static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-/*
- * Some clocks share a register with other clocks. Any clock op that
- * non-atomically modifies a register used by another clock must lock
- * clock_register_lock first.
- */
-static DEFINE_SPINLOCK(clock_register_lock);
-
-/*
- * Some peripheral clocks share an enable bit, so refcount the enable bits
- * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
- */
-static int tegra_periph_clk_enable_refcount[3 * 32];
-
-#define clk_writel(value, reg) \
- __raw_writel(value, reg_clk_base + (reg))
-#define clk_readl(reg) \
- __raw_readl(reg_clk_base + (reg))
-#define pmc_writel(value, reg) \
- __raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
- __raw_readl(reg_pmc_base + (reg))
-
-static unsigned long clk_measure_input_freq(void)
-{
- u32 clock_autodetect;
- clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
- do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
- clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
- if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
- return 12000000;
- } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
- return 13000000;
- } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
- return 19200000;
- } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
- return 26000000;
- } else {
- pr_err("%s: Unexpected clock autodetect value %d", __func__, clock_autodetect);
- BUG();
- return 0;
- }
-}
-
-static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
-{
- s64 divider_u71 = parent_rate * 2;
- divider_u71 += rate - 1;
- do_div(divider_u71, rate);
-
- if (divider_u71 - 2 < 0)
- return 0;
-
- if (divider_u71 - 2 > 255)
- return -EINVAL;
-
- return divider_u71 - 2;
-}
-
-static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
-{
- s64 divider_u16;
-
- divider_u16 = parent_rate;
- divider_u16 += rate - 1;
- do_div(divider_u16, rate);
-
- if (divider_u16 - 1 < 0)
- return 0;
-
- if (divider_u16 - 1 > 255)
- return -EINVAL;
-
- return divider_u16 - 1;
-}
-
-/* clk_m functions */
-static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c)
-{
- u32 auto_clock_control = clk_readl(OSC_CTRL) & ~OSC_CTRL_OSC_FREQ_MASK;
-
- c->rate = clk_measure_input_freq();
- switch (c->rate) {
- case 12000000:
- auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
- break;
- case 13000000:
- auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
- break;
- case 19200000:
- auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
- break;
- case 26000000:
- auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
- break;
- default:
- pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
- BUG();
- }
- clk_writel(auto_clock_control, OSC_CTRL);
- return c->rate;
-}
-
-static void tegra2_clk_m_init(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
- tegra2_clk_m_autodetect_rate(c);
-}
-
-static int tegra2_clk_m_enable(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
- return 0;
-}
-
-static void tegra2_clk_m_disable(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
- BUG();
-}
-
-static struct clk_ops tegra_clk_m_ops = {
- .init = tegra2_clk_m_init,
- .enable = tegra2_clk_m_enable,
- .disable = tegra2_clk_m_disable,
-};
-
-/* super clock functions */
-/* "super clocks" on tegra have two-stage muxes and a clock skipping
- * super divider. We will ignore the clock skipping divider, since we
- * can't lower the voltage when using the clock skip, but we can if we
- * lower the PLL frequency.
- */
-static void tegra2_super_clk_init(struct clk *c)
-{
- u32 val;
- int source;
- int shift;
- const struct clk_mux_sel *sel;
- val = clk_readl(c->reg + SUPER_CLK_MUX);
- c->state = ON;
- BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
- ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
- shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
- SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
- source = (val >> shift) & SUPER_SOURCE_MASK;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->value == source)
- break;
- }
- BUG_ON(sel->input == NULL);
- c->parent = sel->input;
-}
-
-static int tegra2_super_clk_enable(struct clk *c)
-{
- clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
- return 0;
-}
-
-static void tegra2_super_clk_disable(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- /* oops - don't disable the CPU clock! */
- BUG();
-}
-
-static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p)
-{
- u32 val;
- const struct clk_mux_sel *sel;
- int shift;
-
- val = clk_readl(c->reg + SUPER_CLK_MUX);
- BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
- ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
- shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
- SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- val &= ~(SUPER_SOURCE_MASK << shift);
- val |= sel->value << shift;
-
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel(val, c->reg);
-
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
-
- clk_reparent(c, p);
- return 0;
- }
- }
- return -EINVAL;
-}
-
-/*
- * Super clocks have "clock skippers" instead of dividers. Dividing using
- * a clock skipper does not allow the voltage to be scaled down, so instead
- * adjust the rate of the parent clock. This requires that the parent of a
- * super clock have no other children, otherwise the rate will change
- * underneath the other children.
- */
-static int tegra2_super_clk_set_rate(struct clk *c, unsigned long rate)
-{
- return clk_set_rate(c->parent, rate);
-}
-
-static struct clk_ops tegra_super_ops = {
- .init = tegra2_super_clk_init,
- .enable = tegra2_super_clk_enable,
- .disable = tegra2_super_clk_disable,
- .set_parent = tegra2_super_clk_set_parent,
- .set_rate = tegra2_super_clk_set_rate,
-};
-
-/* virtual cpu clock functions */
-/* some clocks can not be stopped (cpu, memory bus) while the SoC is running.
- To change the frequency of these clocks, the parent pll may need to be
- reprogrammed, so the clock must be moved off the pll, the pll reprogrammed,
- and then the clock moved back to the pll. To hide this sequence, a virtual
- clock handles it.
- */
-static void tegra2_cpu_clk_init(struct clk *c)
-{
-}
-
-static int tegra2_cpu_clk_enable(struct clk *c)
-{
- return 0;
-}
-
-static void tegra2_cpu_clk_disable(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- /* oops - don't disable the CPU clock! */
- BUG();
-}
-
-static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate)
-{
- int ret;
- /*
- * Take an extra reference to the main pll so it doesn't turn
- * off when we move the cpu off of it
- */
- clk_enable(c->u.cpu.main);
-
- ret = clk_set_parent(c->parent, c->u.cpu.backup);
- if (ret) {
- pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name);
- goto out;
- }
-
- if (rate == clk_get_rate(c->u.cpu.backup))
- goto out;
-
- ret = clk_set_rate(c->u.cpu.main, rate);
- if (ret) {
- pr_err("Failed to change cpu pll to %lu\n", rate);
- goto out;
- }
-
- ret = clk_set_parent(c->parent, c->u.cpu.main);
- if (ret) {
- pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name);
- goto out;
- }
-
-out:
- clk_disable(c->u.cpu.main);
- return ret;
-}
-
-static struct clk_ops tegra_cpu_ops = {
- .init = tegra2_cpu_clk_init,
- .enable = tegra2_cpu_clk_enable,
- .disable = tegra2_cpu_clk_disable,
- .set_rate = tegra2_cpu_clk_set_rate,
-};
-
-/* virtual cop clock functions. Used to acquire the fake 'cop' clock to
- * reset the COP block (i.e. AVP) */
-static void tegra2_cop_clk_reset(struct clk *c, bool assert)
-{
- unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
- pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert");
- clk_writel(1 << 1, reg);
-}
-
-static struct clk_ops tegra_cop_ops = {
- .reset = tegra2_cop_clk_reset,
-};
-
-/* bus clock functions */
-static void tegra2_bus_clk_init(struct clk *c)
-{
- u32 val = clk_readl(c->reg);
- c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
- c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
- c->mul = 1;
-}
-
-static int tegra2_bus_clk_enable(struct clk *c)
-{
- u32 val;
- unsigned long flags;
-
- spin_lock_irqsave(&clock_register_lock, flags);
-
- val = clk_readl(c->reg);
- val &= ~(BUS_CLK_DISABLE << c->reg_shift);
- clk_writel(val, c->reg);
-
- spin_unlock_irqrestore(&clock_register_lock, flags);
-
- return 0;
-}
-
-static void tegra2_bus_clk_disable(struct clk *c)
-{
- u32 val;
- unsigned long flags;
-
- spin_lock_irqsave(&clock_register_lock, flags);
-
- val = clk_readl(c->reg);
- val |= BUS_CLK_DISABLE << c->reg_shift;
- clk_writel(val, c->reg);
-
- spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate)
-{
- u32 val;
- unsigned long parent_rate = clk_get_rate(c->parent);
- unsigned long flags;
- int ret = -EINVAL;
- int i;
-
- spin_lock_irqsave(&clock_register_lock, flags);
-
- val = clk_readl(c->reg);
- for (i = 1; i <= 4; i++) {
- if (rate == parent_rate / i) {
- val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
- val |= (i - 1) << c->reg_shift;
- clk_writel(val, c->reg);
- c->div = i;
- c->mul = 1;
- ret = 0;
- break;
- }
- }
-
- spin_unlock_irqrestore(&clock_register_lock, flags);
-
- return ret;
-}
-
-static struct clk_ops tegra_bus_ops = {
- .init = tegra2_bus_clk_init,
- .enable = tegra2_bus_clk_enable,
- .disable = tegra2_bus_clk_disable,
- .set_rate = tegra2_bus_clk_set_rate,
-};
-
-/* Blink output functions */
-
-static void tegra2_blink_clk_init(struct clk *c)
-{
- u32 val;
-
- val = pmc_readl(PMC_CTRL);
- c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
- c->mul = 1;
- val = pmc_readl(c->reg);
-
- if (val & PMC_BLINK_TIMER_ENB) {
- unsigned int on_off;
-
- on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
- PMC_BLINK_TIMER_DATA_ON_MASK;
- val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
- val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
- on_off += val;
- /* each tick in the blink timer is 4 32KHz clocks */
- c->div = on_off * 4;
- } else {
- c->div = 1;
- }
-}
-
-static int tegra2_blink_clk_enable(struct clk *c)
-{
- u32 val;
-
- val = pmc_readl(PMC_DPD_PADS_ORIDE);
- pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-
- val = pmc_readl(PMC_CTRL);
- pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
- return 0;
-}
-
-static void tegra2_blink_clk_disable(struct clk *c)
-{
- u32 val;
-
- val = pmc_readl(PMC_CTRL);
- pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
- val = pmc_readl(PMC_DPD_PADS_ORIDE);
- pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-}
-
-static int tegra2_blink_clk_set_rate(struct clk *c, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(c->parent);
- if (rate >= parent_rate) {
- c->div = 1;
- pmc_writel(0, c->reg);
- } else {
- unsigned int on_off;
- u32 val;
-
- on_off = DIV_ROUND_UP(parent_rate / 8, rate);
- c->div = on_off * 8;
-
- val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
- PMC_BLINK_TIMER_DATA_ON_SHIFT;
- on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
- on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
- val |= on_off;
- val |= PMC_BLINK_TIMER_ENB;
- pmc_writel(val, c->reg);
- }
-
- return 0;
-}
-
-static struct clk_ops tegra_blink_clk_ops = {
- .init = &tegra2_blink_clk_init,
- .enable = &tegra2_blink_clk_enable,
- .disable = &tegra2_blink_clk_disable,
- .set_rate = &tegra2_blink_clk_set_rate,
-};
-
-/* PLL Functions */
-static int tegra2_pll_clk_wait_for_lock(struct clk *c)
-{
- udelay(c->u.pll.lock_delay);
-
- return 0;
-}
-
-static void tegra2_pll_clk_init(struct clk *c)
-{
- u32 val = clk_readl(c->reg + PLL_BASE);
-
- c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
-
- if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
- pr_warning("Clock %s has unknown fixed frequency\n", c->name);
- c->mul = 1;
- c->div = 1;
- } else if (val & PLL_BASE_BYPASS) {
- c->mul = 1;
- c->div = 1;
- } else {
- c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
- c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
- if (c->flags & PLLU)
- c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
- else
- c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
- }
-}
-
-static int tegra2_pll_clk_enable(struct clk *c)
-{
- u32 val;
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- val = clk_readl(c->reg + PLL_BASE);
- val &= ~PLL_BASE_BYPASS;
- val |= PLL_BASE_ENABLE;
- clk_writel(val, c->reg + PLL_BASE);
-
- tegra2_pll_clk_wait_for_lock(c);
-
- return 0;
-}
-
-static void tegra2_pll_clk_disable(struct clk *c)
-{
- u32 val;
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- val = clk_readl(c->reg);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
- clk_writel(val, c->reg);
-}
-
-static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate)
-{
- u32 val;
- unsigned long input_rate;
- const struct clk_pll_freq_table *sel;
-
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
- input_rate = clk_get_rate(c->parent);
- for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
- if (sel->input_rate == input_rate && sel->output_rate == rate) {
- c->mul = sel->n;
- c->div = sel->m * sel->p;
-
- val = clk_readl(c->reg + PLL_BASE);
- if (c->flags & PLL_FIXED)
- val |= PLL_BASE_OVERRIDE;
- val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
- PLL_BASE_DIVM_MASK);
- val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
- (sel->n << PLL_BASE_DIVN_SHIFT);
- BUG_ON(sel->p < 1 || sel->p > 2);
- if (c->flags & PLLU) {
- if (sel->p == 1)
- val |= PLLU_BASE_POST_DIV;
- } else {
- if (sel->p == 2)
- val |= 1 << PLL_BASE_DIVP_SHIFT;
- }
- clk_writel(val, c->reg + PLL_BASE);
-
- if (c->flags & PLL_HAS_CPCON) {
- val = clk_readl(c->reg + PLL_MISC(c));
- val &= ~PLL_MISC_CPCON_MASK;
- val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
- clk_writel(val, c->reg + PLL_MISC(c));
- }
-
- if (c->state == ON)
- tegra2_pll_clk_enable(c);
-
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_ops = {
- .init = tegra2_pll_clk_init,
- .enable = tegra2_pll_clk_enable,
- .disable = tegra2_pll_clk_disable,
- .set_rate = tegra2_pll_clk_set_rate,
-};
-
-static void tegra2_pllx_clk_init(struct clk *c)
-{
- tegra2_pll_clk_init(c);
-
- if (tegra_sku_id == 7)
- c->max_rate = 750000000;
-}
-
-static struct clk_ops tegra_pllx_ops = {
- .init = tegra2_pllx_clk_init,
- .enable = tegra2_pll_clk_enable,
- .disable = tegra2_pll_clk_disable,
- .set_rate = tegra2_pll_clk_set_rate,
-};
-
-static int tegra2_plle_clk_enable(struct clk *c)
-{
- u32 val;
-
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- mdelay(1);
-
- val = clk_readl(c->reg + PLL_BASE);
- if (!(val & PLLE_MISC_READY))
- return -EBUSY;
-
- val = clk_readl(c->reg + PLL_BASE);
- val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
- clk_writel(val, c->reg + PLL_BASE);
-
- return 0;
-}
-
-static struct clk_ops tegra_plle_ops = {
- .init = tegra2_pll_clk_init,
- .enable = tegra2_plle_clk_enable,
- .set_rate = tegra2_pll_clk_set_rate,
-};
-
-/* Clock divider ops */
-static void tegra2_pll_div_clk_init(struct clk *c)
-{
- u32 val = clk_readl(c->reg);
- u32 divu71;
- val >>= c->reg_shift;
- c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
- if (!(val & PLL_OUT_RESET_DISABLE))
- c->state = OFF;
-
- if (c->flags & DIV_U71) {
- divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
- c->div = (divu71 + 2);
- c->mul = 2;
- } else if (c->flags & DIV_2) {
- c->div = 2;
- c->mul = 1;
- } else {
- c->div = 1;
- c->mul = 1;
- }
-}
-
-static int tegra2_pll_div_clk_enable(struct clk *c)
-{
- u32 val;
- u32 new_val;
- unsigned long flags;
-
- pr_debug("%s: %s\n", __func__, c->name);
- if (c->flags & DIV_U71) {
- spin_lock_irqsave(&clock_register_lock, flags);
- val = clk_readl(c->reg);
- new_val = val >> c->reg_shift;
- new_val &= 0xFFFF;
-
- new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
-
- val &= ~(0xFFFF << c->reg_shift);
- val |= new_val << c->reg_shift;
- clk_writel(val, c->reg);
- spin_unlock_irqrestore(&clock_register_lock, flags);
- return 0;
- } else if (c->flags & DIV_2) {
- BUG_ON(!(c->flags & PLLD));
- spin_lock_irqsave(&clock_register_lock, flags);
- val = clk_readl(c->reg);
- val &= ~PLLD_MISC_DIV_RST;
- clk_writel(val, c->reg);
- spin_unlock_irqrestore(&clock_register_lock, flags);
- return 0;
- }
- return -EINVAL;
-}
-
-static void tegra2_pll_div_clk_disable(struct clk *c)
-{
- u32 val;
- u32 new_val;
- unsigned long flags;
-
- pr_debug("%s: %s\n", __func__, c->name);
- if (c->flags & DIV_U71) {
- spin_lock_irqsave(&clock_register_lock, flags);
- val = clk_readl(c->reg);
- new_val = val >> c->reg_shift;
- new_val &= 0xFFFF;
-
- new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
-
- val &= ~(0xFFFF << c->reg_shift);
- val |= new_val << c->reg_shift;
- clk_writel(val, c->reg);
- spin_unlock_irqrestore(&clock_register_lock, flags);
- } else if (c->flags & DIV_2) {
- BUG_ON(!(c->flags & PLLD));
- spin_lock_irqsave(&clock_register_lock, flags);
- val = clk_readl(c->reg);
- val |= PLLD_MISC_DIV_RST;
- clk_writel(val, c->reg);
- spin_unlock_irqrestore(&clock_register_lock, flags);
- }
-}
-
-static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
-{
- u32 val;
- u32 new_val;
- int divider_u71;
- unsigned long parent_rate = clk_get_rate(c->parent);
- unsigned long flags;
-
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
- if (c->flags & DIV_U71) {
- divider_u71 = clk_div71_get_divider(parent_rate, rate);
- if (divider_u71 >= 0) {
- spin_lock_irqsave(&clock_register_lock, flags);
- val = clk_readl(c->reg);
- new_val = val >> c->reg_shift;
- new_val &= 0xFFFF;
- if (c->flags & DIV_U71_FIXED)
- new_val |= PLL_OUT_OVERRIDE;
- new_val &= ~PLL_OUT_RATIO_MASK;
- new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
-
- val &= ~(0xFFFF << c->reg_shift);
- val |= new_val << c->reg_shift;
- clk_writel(val, c->reg);
- c->div = divider_u71 + 2;
- c->mul = 2;
- spin_unlock_irqrestore(&clock_register_lock, flags);
- return 0;
- }
- } else if (c->flags & DIV_2) {
- if (parent_rate == rate * 2)
- return 0;
- }
- return -EINVAL;
-}
-
-static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
-{
- int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
- if (c->flags & DIV_U71) {
- divider = clk_div71_get_divider(parent_rate, rate);
- if (divider < 0)
- return divider;
- return DIV_ROUND_UP(parent_rate * 2, divider + 2);
- } else if (c->flags & DIV_2) {
- return DIV_ROUND_UP(parent_rate, 2);
- }
- return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_div_ops = {
- .init = tegra2_pll_div_clk_init,
- .enable = tegra2_pll_div_clk_enable,
- .disable = tegra2_pll_div_clk_disable,
- .set_rate = tegra2_pll_div_clk_set_rate,
- .round_rate = tegra2_pll_div_clk_round_rate,
-};
-
-/* Periph clk ops */
-
-static void tegra2_periph_clk_init(struct clk *c)
-{
- u32 val = clk_readl(c->reg);
- const struct clk_mux_sel *mux = NULL;
- const struct clk_mux_sel *sel;
- u32 shift;
- u32 mask;
-
- if (c->flags & MUX_PWM) {
- shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
- mask = PERIPH_CLK_SOURCE_PWM_MASK;
- } else {
- shift = PERIPH_CLK_SOURCE_SHIFT;
- mask = PERIPH_CLK_SOURCE_MASK;
- }
-
- if (c->flags & MUX) {
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if ((val & mask) >> shift == sel->value)
- mux = sel;
- }
- BUG_ON(!mux);
-
- c->parent = mux->input;
- } else {
- c->parent = c->inputs[0].input;
- }
-
- if (c->flags & DIV_U71) {
- u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
- c->div = divu71 + 2;
- c->mul = 2;
- } else if (c->flags & DIV_U16) {
- u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
- c->div = divu16 + 1;
- c->mul = 1;
- } else {
- c->div = 1;
- c->mul = 1;
- }
-
- c->state = ON;
-
- if (!c->u.periph.clk_num)
- return;
-
- if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
- PERIPH_CLK_TO_ENB_BIT(c)))
- c->state = OFF;
-
- if (!(c->flags & PERIPH_NO_RESET))
- if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
- PERIPH_CLK_TO_ENB_BIT(c))
- c->state = OFF;
-}
-
-static int tegra2_periph_clk_enable(struct clk *c)
-{
- u32 val;
- unsigned long flags;
- int refcount;
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- if (!c->u.periph.clk_num)
- return 0;
-
- spin_lock_irqsave(&clock_register_lock, flags);
-
- refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
-
- if (refcount > 1)
- goto out;
-
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
- if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
- if (c->flags & PERIPH_EMC_ENB) {
- /* The EMC peripheral clock has 2 extra enable bits */
- /* FIXME: Do they need to be disabled? */
- val = clk_readl(c->reg);
- val |= 0x3 << 24;
- clk_writel(val, c->reg);
- }
-
-out:
- spin_unlock_irqrestore(&clock_register_lock, flags);
-
- return 0;
-}
-
-static void tegra2_periph_clk_disable(struct clk *c)
-{
- unsigned long flags;
-
- pr_debug("%s on clock %s\n", __func__, c->name);
-
- if (!c->u.periph.clk_num)
- return;
-
- spin_lock_irqsave(&clock_register_lock, flags);
-
- if (c->refcnt)
- tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
-
- if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0)
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-
- spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static void tegra2_periph_clk_reset(struct clk *c, bool assert)
-{
- unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
- pr_debug("%s %s on clock %s\n", __func__,
- assert ? "assert" : "deassert", c->name);
-
- BUG_ON(!c->u.periph.clk_num);
-
- if (!(c->flags & PERIPH_NO_RESET))
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- base + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p)
-{
- u32 val;
- const struct clk_mux_sel *sel;
- u32 mask, shift;
-
- pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
- if (c->flags & MUX_PWM) {
- shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
- mask = PERIPH_CLK_SOURCE_PWM_MASK;
- } else {
- shift = PERIPH_CLK_SOURCE_SHIFT;
- mask = PERIPH_CLK_SOURCE_MASK;
- }
-
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- val = clk_readl(c->reg);
- val &= ~mask;
- val |= (sel->value) << shift;
-
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel(val, c->reg);
-
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
-
- clk_reparent(c, p);
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
-static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate)
-{
- u32 val;
- int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
-
- if (c->flags & DIV_U71) {
- divider = clk_div71_get_divider(parent_rate, rate);
- if (divider >= 0) {
- val = clk_readl(c->reg);
- val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
- val |= divider;
- clk_writel(val, c->reg);
- c->div = divider + 2;
- c->mul = 2;
- return 0;
- }
- } else if (c->flags & DIV_U16) {
- divider = clk_div16_get_divider(parent_rate, rate);
- if (divider >= 0) {
- val = clk_readl(c->reg);
- val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
- val |= divider;
- clk_writel(val, c->reg);
- c->div = divider + 1;
- c->mul = 1;
- return 0;
- }
- } else if (parent_rate <= rate) {
- c->div = 1;
- c->mul = 1;
- return 0;
- }
- return -EINVAL;
-}
-
-static long tegra2_periph_clk_round_rate(struct clk *c,
- unsigned long rate)
-{
- int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
- if (c->flags & DIV_U71) {
- divider = clk_div71_get_divider(parent_rate, rate);
- if (divider < 0)
- return divider;
-
- return DIV_ROUND_UP(parent_rate * 2, divider + 2);
- } else if (c->flags & DIV_U16) {
- divider = clk_div16_get_divider(parent_rate, rate);
- if (divider < 0)
- return divider;
- return DIV_ROUND_UP(parent_rate, divider + 1);
- }
- return -EINVAL;
-}
-
-static struct clk_ops tegra_periph_clk_ops = {
- .init = &tegra2_periph_clk_init,
- .enable = &tegra2_periph_clk_enable,
- .disable = &tegra2_periph_clk_disable,
- .set_parent = &tegra2_periph_clk_set_parent,
- .set_rate = &tegra2_periph_clk_set_rate,
- .round_rate = &tegra2_periph_clk_round_rate,
- .reset = &tegra2_periph_clk_reset,
-};
-
-/* The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB. */
-void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
-{
- u32 reg;
- unsigned long flags;
-
- spin_lock_irqsave(&c->spinlock, flags);
-
- delay = clamp(delay, 0, 15);
- reg = clk_readl(c->reg);
- reg &= ~SDMMC_CLK_INT_FB_DLY_MASK;
- reg |= SDMMC_CLK_INT_FB_SEL;
- reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT;
- clk_writel(reg, c->reg);
-
- spin_unlock_irqrestore(&c->spinlock, flags);
-}
-
-/* External memory controller clock ops */
-static void tegra2_emc_clk_init(struct clk *c)
-{
- tegra2_periph_clk_init(c);
- c->max_rate = clk_get_rate_locked(c);
-}
-
-static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate)
-{
- long emc_rate;
- long clk_rate;
-
- /*
- * The slowest entry in the EMC clock table that is at least as
- * fast as rate.
- */
- emc_rate = tegra_emc_round_rate(rate);
- if (emc_rate < 0)
- return c->max_rate;
-
- /*
- * The fastest rate the PLL will generate that is at most the
- * requested rate.
- */
- clk_rate = tegra2_periph_clk_round_rate(c, emc_rate);
-
- /*
- * If this fails, and emc_rate > clk_rate, it's because the maximum
- * rate in the EMC tables is larger than the maximum rate of the EMC
- * clock. The EMC clock's max rate is the rate it was running when the
- * kernel booted. Such a mismatch is probably due to using the wrong
- * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
- */
- WARN_ONCE(emc_rate != clk_rate,
- "emc_rate %ld != clk_rate %ld",
- emc_rate, clk_rate);
-
- return emc_rate;
-}
-
-static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate)
-{
- int ret;
- /*
- * The Tegra2 memory controller has an interlock with the clock
- * block that allows memory shadowed registers to be updated,
- * and then transfer them to the main registers at the same
- * time as the clock update without glitches.
- */
- ret = tegra_emc_set_rate(rate);
- if (ret < 0)
- return ret;
-
- ret = tegra2_periph_clk_set_rate(c, rate);
- udelay(1);
-
- return ret;
-}
-
-static struct clk_ops tegra_emc_clk_ops = {
- .init = &tegra2_emc_clk_init,
- .enable = &tegra2_periph_clk_enable,
- .disable = &tegra2_periph_clk_disable,
- .set_parent = &tegra2_periph_clk_set_parent,
- .set_rate = &tegra2_emc_clk_set_rate,
- .round_rate = &tegra2_emc_clk_round_rate,
- .reset = &tegra2_periph_clk_reset,
-};
-
-/* Clock doubler ops */
-static void tegra2_clk_double_init(struct clk *c)
-{
- c->mul = 2;
- c->div = 1;
- c->state = ON;
-
- if (!c->u.periph.clk_num)
- return;
-
- if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
- PERIPH_CLK_TO_ENB_BIT(c)))
- c->state = OFF;
-};
-
-static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate)
-{
- if (rate != 2 * clk_get_rate(c->parent))
- return -EINVAL;
- c->mul = 2;
- c->div = 1;
- return 0;
-}
-
-static struct clk_ops tegra_clk_double_ops = {
- .init = &tegra2_clk_double_init,
- .enable = &tegra2_periph_clk_enable,
- .disable = &tegra2_periph_clk_disable,
- .set_rate = &tegra2_clk_double_set_rate,
-};
-
-/* Audio sync clock ops */
-static void tegra2_audio_sync_clk_init(struct clk *c)
-{
- int source;
- const struct clk_mux_sel *sel;
- u32 val = clk_readl(c->reg);
- c->state = (val & (1<<4)) ? OFF : ON;
- source = val & 0xf;
- for (sel = c->inputs; sel->input != NULL; sel++)
- if (sel->value == source)
- break;
- BUG_ON(sel->input == NULL);
- c->parent = sel->input;
-}
-
-static int tegra2_audio_sync_clk_enable(struct clk *c)
-{
- clk_writel(0, c->reg);
- return 0;
-}
-
-static void tegra2_audio_sync_clk_disable(struct clk *c)
-{
- clk_writel(1, c->reg);
-}
-
-static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
-{
- u32 val;
- const struct clk_mux_sel *sel;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- val = clk_readl(c->reg);
- val &= ~0xf;
- val |= sel->value;
-
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel(val, c->reg);
-
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
-
- clk_reparent(c, p);
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
-static struct clk_ops tegra_audio_sync_clk_ops = {
- .init = tegra2_audio_sync_clk_init,
- .enable = tegra2_audio_sync_clk_enable,
- .disable = tegra2_audio_sync_clk_disable,
- .set_parent = tegra2_audio_sync_clk_set_parent,
-};
-
-/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */
-
-static void tegra2_cdev_clk_init(struct clk *c)
-{
- /* We could un-tristate the cdev1 or cdev2 pingroup here; this is
- * currently done in the pinmux code. */
- c->state = ON;
-
- BUG_ON(!c->u.periph.clk_num);
-
- if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
- PERIPH_CLK_TO_ENB_BIT(c)))
- c->state = OFF;
-}
-
-static int tegra2_cdev_clk_enable(struct clk *c)
-{
- BUG_ON(!c->u.periph.clk_num);
-
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
- return 0;
-}
-
-static void tegra2_cdev_clk_disable(struct clk *c)
-{
- BUG_ON(!c->u.periph.clk_num);
-
- clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
- CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static struct clk_ops tegra_cdev_clk_ops = {
- .init = &tegra2_cdev_clk_init,
- .enable = &tegra2_cdev_clk_enable,
- .disable = &tegra2_cdev_clk_disable,
-};
-
-/* shared bus ops */
-/*
- * Some clocks may have multiple downstream users that need to request a
- * higher clock rate. Shared bus clocks provide a unique shared_bus_user
- * clock to each user. The frequency of the bus is set to the highest
- * enabled shared_bus_user clock, with a minimum value set by the
- * shared bus.
- */
-static int tegra_clk_shared_bus_update(struct clk *bus)
-{
- struct clk *c;
- unsigned long rate = bus->min_rate;
-
- list_for_each_entry(c, &bus->shared_bus_list, u.shared_bus_user.node)
- if (c->u.shared_bus_user.enabled)
- rate = max(c->u.shared_bus_user.rate, rate);
-
- if (rate == clk_get_rate_locked(bus))
- return 0;
-
- return clk_set_rate_locked(bus, rate);
-};
-
-static void tegra_clk_shared_bus_init(struct clk *c)
-{
- unsigned long flags;
-
- c->max_rate = c->parent->max_rate;
- c->u.shared_bus_user.rate = c->parent->max_rate;
- c->state = OFF;
- c->set = true;
-
- spin_lock_irqsave(&c->parent->spinlock, flags);
-
- list_add_tail(&c->u.shared_bus_user.node,
- &c->parent->shared_bus_list);
-
- spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate)
-{
- unsigned long flags;
- int ret;
- long new_rate = rate;
-
- new_rate = clk_round_rate(c->parent, new_rate);
- if (new_rate < 0)
- return new_rate;
-
- spin_lock_irqsave(&c->parent->spinlock, flags);
-
- c->u.shared_bus_user.rate = new_rate;
- ret = tegra_clk_shared_bus_update(c->parent);
-
- spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
- return ret;
-}
-
-static long tegra_clk_shared_bus_round_rate(struct clk *c, unsigned long rate)
-{
- return clk_round_rate(c->parent, rate);
-}
-
-static int tegra_clk_shared_bus_enable(struct clk *c)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&c->parent->spinlock, flags);
-
- c->u.shared_bus_user.enabled = true;
- ret = tegra_clk_shared_bus_update(c->parent);
-
- spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
- return ret;
-}
-
-static void tegra_clk_shared_bus_disable(struct clk *c)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&c->parent->spinlock, flags);
-
- c->u.shared_bus_user.enabled = false;
- ret = tegra_clk_shared_bus_update(c->parent);
- WARN_ON_ONCE(ret);
-
- spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static struct clk_ops tegra_clk_shared_bus_ops = {
- .init = tegra_clk_shared_bus_init,
- .enable = tegra_clk_shared_bus_enable,
- .disable = tegra_clk_shared_bus_disable,
- .set_rate = tegra_clk_shared_bus_set_rate,
- .round_rate = tegra_clk_shared_bus_round_rate,
-};
-
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
- .name = "clk_32k",
- .rate = 32768,
- .ops = NULL,
- .max_rate = 32768,
-};
-
-static struct clk_pll_freq_table tegra_pll_s_freq_table[] = {
- {32768, 12000000, 366, 1, 1, 0},
- {32768, 13000000, 397, 1, 1, 0},
- {32768, 19200000, 586, 1, 1, 0},
- {32768, 26000000, 793, 1, 1, 0},
- {0, 0, 0, 0, 0, 0},
-};
-
-static struct clk tegra_pll_s = {
- .name = "pll_s",
- .flags = PLL_ALT_MISC_REG,
- .ops = &tegra_pll_ops,
- .parent = &tegra_clk_32k,
- .max_rate = 26000000,
- .reg = 0xf0,
- .u.pll = {
- .input_min = 32768,
- .input_max = 32768,
- .cf_min = 0, /* FIXME */
- .cf_max = 0, /* FIXME */
- .vco_min = 12000000,
- .vco_max = 26000000,
- .freq_table = tegra_pll_s_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk_mux_sel tegra_clk_m_sel[] = {
- { .input = &tegra_clk_32k, .value = 0},
- { .input = &tegra_pll_s, .value = 1},
- { NULL , 0},
-};
-
-static struct clk tegra_clk_m = {
- .name = "clk_m",
- .flags = ENABLE_ON_INIT,
- .ops = &tegra_clk_m_ops,
- .inputs = tegra_clk_m_sel,
- .reg = 0x1fc,
- .reg_shift = 28,
- .max_rate = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
- { 12000000, 600000000, 600, 12, 1, 8 },
- { 13000000, 600000000, 600, 13, 1, 8 },
- { 19200000, 600000000, 500, 16, 1, 6 },
- { 26000000, 600000000, 600, 26, 1, 8 },
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
- .name = "pll_c",
- .flags = PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0x80,
- .parent = &tegra_clk_m,
- .max_rate = 600000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_c_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_c_out1 = {
- .name = "pll_c_out1",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_c,
- .reg = 0x84,
- .reg_shift = 0,
- .max_rate = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
- .name = "pll_m",
- .flags = PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0x90,
- .parent = &tegra_clk_m,
- .max_rate = 800000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1200000000,
- .freq_table = tegra_pll_m_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_m_out1 = {
- .name = "pll_m_out1",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_m,
- .reg = 0x94,
- .reg_shift = 0,
- .max_rate = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 19200000, 216000000, 90, 4, 2, 1},
- { 26000000, 216000000, 432, 26, 2, 8},
- { 12000000, 432000000, 432, 12, 1, 8},
- { 13000000, 432000000, 432, 13, 1, 8},
- { 19200000, 432000000, 90, 4, 1, 1},
- { 26000000, 432000000, 432, 26, 1, 8},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
- .name = "pll_p",
- .flags = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0xa0,
- .parent = &tegra_clk_m,
- .max_rate = 432000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_p_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_p_out1 = {
- .name = "pll_p_out1",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa4,
- .reg_shift = 0,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
- .name = "pll_p_out2",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa4,
- .reg_shift = 16,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
- .name = "pll_p_out3",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa8,
- .reg_shift = 0,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
- .name = "pll_p_out4",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa8,
- .reg_shift = 16,
- .max_rate = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
- .name = "pll_a",
- .flags = PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0xb0,
- .parent = &tegra_pll_p_out1,
- .max_rate = 73728000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_a_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_a_out0 = {
- .name = "pll_a_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_a,
- .reg = 0xb4,
- .reg_shift = 0,
- .max_rate = 73728000,
-};
-
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 19200000, 216000000, 135, 12, 1, 3},
- { 26000000, 216000000, 216, 26, 1, 4},
-
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
-
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
-
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
- .name = "pll_d",
- .flags = PLL_HAS_CPCON | PLLD,
- .ops = &tegra_pll_ops,
- .reg = 0xd0,
- .parent = &tegra_clk_m,
- .max_rate = 1000000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 40000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 40000000,
- .vco_max = 1000000000,
- .freq_table = tegra_pll_d_freq_table,
- .lock_delay = 1000,
- },
-};
-
-static struct clk tegra_pll_d_out0 = {
- .name = "pll_d_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_2 | PLLD,
- .parent = &tegra_pll_d,
- .max_rate = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 0},
- { 13000000, 480000000, 960, 13, 2, 0},
- { 19200000, 480000000, 200, 4, 2, 0},
- { 26000000, 480000000, 960, 26, 2, 0},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
- .name = "pll_u",
- .flags = PLLU,
- .ops = &tegra_pll_ops,
- .reg = 0xc0,
- .parent = &tegra_clk_m,
- .max_rate = 480000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 40000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 480000000,
- .vco_max = 960000000,
- .freq_table = tegra_pll_u_freq_table,
- .lock_delay = 1000,
- },
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
- /* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
-
- /* 912 MHz */
- { 12000000, 912000000, 912, 12, 1, 12},
- { 13000000, 912000000, 912, 13, 1, 12},
- { 19200000, 912000000, 760, 16, 1, 8},
- { 26000000, 912000000, 912, 26, 1, 12},
-
- /* 816 MHz */
- { 12000000, 816000000, 816, 12, 1, 12},
- { 13000000, 816000000, 816, 13, 1, 12},
- { 19200000, 816000000, 680, 16, 1, 8},
- { 26000000, 816000000, 816, 26, 1, 12},
-
- /* 760 MHz */
- { 12000000, 760000000, 760, 12, 1, 12},
- { 13000000, 760000000, 760, 13, 1, 12},
- { 19200000, 760000000, 950, 24, 1, 8},
- { 26000000, 760000000, 760, 26, 1, 12},
-
- /* 750 MHz */
- { 12000000, 750000000, 750, 12, 1, 12},
- { 13000000, 750000000, 750, 13, 1, 12},
- { 19200000, 750000000, 625, 16, 1, 8},
- { 26000000, 750000000, 750, 26, 1, 12},
-
- /* 608 MHz */
- { 12000000, 608000000, 608, 12, 1, 12},
- { 13000000, 608000000, 608, 13, 1, 12},
- { 19200000, 608000000, 380, 12, 1, 8},
- { 26000000, 608000000, 608, 26, 1, 12},
-
- /* 456 MHz */
- { 12000000, 456000000, 456, 12, 1, 12},
- { 13000000, 456000000, 456, 13, 1, 12},
- { 19200000, 456000000, 380, 16, 1, 8},
- { 26000000, 456000000, 456, 26, 1, 12},
-
- /* 312 MHz */
- { 12000000, 312000000, 312, 12, 1, 12},
- { 13000000, 312000000, 312, 13, 1, 12},
- { 19200000, 312000000, 260, 16, 1, 8},
- { 26000000, 312000000, 312, 26, 1, 12},
-
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
- .name = "pll_x",
- .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG,
- .ops = &tegra_pllx_ops,
- .reg = 0xe0,
- .parent = &tegra_clk_m,
- .max_rate = 1000000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1200000000,
- .freq_table = tegra_pll_x_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
- { 12000000, 100000000, 200, 24, 1, 0 },
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
- .name = "pll_e",
- .flags = PLL_ALT_MISC_REG,
- .ops = &tegra_plle_ops,
- .parent = &tegra_clk_m,
- .reg = 0xe8,
- .max_rate = 100000000,
- .u.pll = {
- .input_min = 12000000,
- .input_max = 12000000,
- .freq_table = tegra_pll_e_freq_table,
- },
-};
-
-static struct clk tegra_clk_d = {
- .name = "clk_d",
- .flags = PERIPH_NO_RESET,
- .ops = &tegra_clk_double_ops,
- .reg = 0x34,
- .reg_shift = 12,
- .parent = &tegra_clk_m,
- .max_rate = 52000000,
- .u.periph = {
- .clk_num = 90,
- },
-};
-
-/* dap_mclk1, belongs to the cdev1 pingroup. */
-static struct clk tegra_clk_cdev1 = {
- .name = "cdev1",
- .ops = &tegra_cdev_clk_ops,
- .rate = 26000000,
- .max_rate = 26000000,
- .u.periph = {
- .clk_num = 94,
- },
-};
-
-/* dap_mclk2, belongs to the cdev2 pingroup. */
-static struct clk tegra_clk_cdev2 = {
- .name = "cdev2",
- .ops = &tegra_cdev_clk_ops,
- .rate = 26000000,
- .max_rate = 26000000,
- .u.periph = {
- .clk_num = 93,
- },
-};
-
-/* initialized before peripheral clocks */
-static struct clk_mux_sel mux_audio_sync_clk[8+1];
-static const struct audio_sources {
- const char *name;
- int value;
-} mux_audio_sync_clk_sources[] = {
- { .name = "spdif_in", .value = 0 },
- { .name = "i2s1", .value = 1 },
- { .name = "i2s2", .value = 2 },
- { .name = "pll_a_out0", .value = 4 },
-#if 0 /* FIXME: not implemented */
- { .name = "ac97", .value = 3 },
- { .name = "ext_audio_clk2", .value = 5 },
- { .name = "ext_audio_clk1", .value = 6 },
- { .name = "ext_vimclk", .value = 7 },
-#endif
- { NULL, 0 }
-};
-
-static struct clk tegra_clk_audio = {
- .name = "audio",
- .inputs = mux_audio_sync_clk,
- .reg = 0x38,
- .max_rate = 73728000,
- .ops = &tegra_audio_sync_clk_ops
-};
-
-static struct clk tegra_clk_audio_2x = {
- .name = "audio_2x",
- .flags = PERIPH_NO_RESET,
- .max_rate = 48000000,
- .ops = &tegra_clk_double_ops,
- .reg = 0x34,
- .reg_shift = 8,
- .parent = &tegra_clk_audio,
- .u.periph = {
- .clk_num = 89,
- },
-};
-
-static struct clk_lookup tegra_audio_clk_lookups[] = {
- { .con_id = "audio", .clk = &tegra_clk_audio },
- { .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
-};
-
-/* This is called after peripheral clocks are initialized, as the
- * audio_sync clock depends on some of the peripheral clocks.
- */
-
-static void init_audio_sync_clock_mux(void)
-{
- int i;
- struct clk_mux_sel *sel = mux_audio_sync_clk;
- const struct audio_sources *src = mux_audio_sync_clk_sources;
- struct clk_lookup *lookup;
-
- for (i = 0; src->name; i++, sel++, src++) {
- sel->input = tegra_get_clock_by_name(src->name);
- if (!sel->input)
- pr_err("%s: could not find clk %s\n", __func__,
- src->name);
- sel->value = src->value;
- }
-
- lookup = tegra_audio_clk_lookups;
- for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
- clk_init(lookup->clk);
- clkdev_add(lookup);
- }
-}
-
-static struct clk_mux_sel mux_cclk[] = {
- { .input = &tegra_clk_m, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_clk_32k, .value = 2},
- { .input = &tegra_pll_m, .value = 3},
- { .input = &tegra_pll_p, .value = 4},
- { .input = &tegra_pll_p_out4, .value = 5},
- { .input = &tegra_pll_p_out3, .value = 6},
- { .input = &tegra_clk_d, .value = 7},
- { .input = &tegra_pll_x, .value = 8},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_sclk[] = {
- { .input = &tegra_clk_m, .value = 0},
- { .input = &tegra_pll_c_out1, .value = 1},
- { .input = &tegra_pll_p_out4, .value = 2},
- { .input = &tegra_pll_p_out3, .value = 3},
- { .input = &tegra_pll_p_out2, .value = 4},
- { .input = &tegra_clk_d, .value = 5},
- { .input = &tegra_clk_32k, .value = 6},
- { .input = &tegra_pll_m_out1, .value = 7},
- { NULL, 0},
-};
-
-static struct clk tegra_clk_cclk = {
- .name = "cclk",
- .inputs = mux_cclk,
- .reg = 0x20,
- .ops = &tegra_super_ops,
- .max_rate = 1000000000,
-};
-
-static struct clk tegra_clk_sclk = {
- .name = "sclk",
- .inputs = mux_sclk,
- .reg = 0x28,
- .ops = &tegra_super_ops,
- .max_rate = 240000000,
- .min_rate = 120000000,
-};
-
-static struct clk tegra_clk_virtual_cpu = {
- .name = "cpu",
- .parent = &tegra_clk_cclk,
- .ops = &tegra_cpu_ops,
- .max_rate = 1000000000,
- .u.cpu = {
- .main = &tegra_pll_x,
- .backup = &tegra_pll_p,
- },
-};
-
-static struct clk tegra_clk_cop = {
- .name = "cop",
- .parent = &tegra_clk_sclk,
- .ops = &tegra_cop_ops,
- .max_rate = 240000000,
-};
-
-static struct clk tegra_clk_hclk = {
- .name = "hclk",
- .flags = DIV_BUS,
- .parent = &tegra_clk_sclk,
- .reg = 0x30,
- .reg_shift = 4,
- .ops = &tegra_bus_ops,
- .max_rate = 240000000,
-};
-
-static struct clk tegra_clk_pclk = {
- .name = "pclk",
- .flags = DIV_BUS,
- .parent = &tegra_clk_hclk,
- .reg = 0x30,
- .reg_shift = 0,
- .ops = &tegra_bus_ops,
- .max_rate = 120000000,
-};
-
-static struct clk tegra_clk_blink = {
- .name = "blink",
- .parent = &tegra_clk_32k,
- .reg = 0x40,
- .ops = &tegra_blink_clk_ops,
- .max_rate = 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
- { .input = &tegra_pll_m, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_pll_p, .value = 2},
- { .input = &tegra_pll_a_out0, .value = 3},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
- { .input = &tegra_pll_m, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_pll_p, .value = 2},
- { .input = &tegra_clk_m, .value = 3},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
- { .input = &tegra_pll_p, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_pll_m, .value = 2},
- { .input = &tegra_clk_m, .value = 3},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
- {.input = &tegra_pll_a_out0, .value = 0},
- {.input = &tegra_clk_audio_2x, .value = 1},
- {.input = &tegra_pll_p, .value = 2},
- {.input = &tegra_clk_m, .value = 3},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_d_out0, .value = 1},
- {.input = &tegra_pll_c, .value = 2},
- {.input = &tegra_clk_m, .value = 3},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_c, .value = 1},
- {.input = &tegra_clk_audio, .value = 2},
- {.input = &tegra_clk_m, .value = 3},
- {.input = &tegra_clk_32k, .value = 4},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_c, .value = 1},
- {.input = &tegra_pll_m, .value = 2},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
- { .input = &tegra_clk_m, .value = 0},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
- { .input = &tegra_pll_p_out3, .value = 0},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_plld[] = {
- { .input = &tegra_pll_d, .value = 0},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
- { .input = &tegra_clk_32k, .value = 0},
- { NULL, 0},
-};
-
-static struct clk_mux_sel mux_pclk[] = {
- { .input = &tegra_clk_pclk, .value = 0},
- { NULL, 0},
-};
-
-static struct clk tegra_clk_emc = {
- .name = "emc",
- .ops = &tegra_emc_clk_ops,
- .reg = 0x19c,
- .max_rate = 800000000,
- .inputs = mux_pllm_pllc_pllp_clkm,
- .flags = MUX | DIV_U71 | PERIPH_EMC_ENB,
- .u.periph = {
- .clk_num = 57,
- },
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- .ops = &tegra_periph_clk_ops, \
- .reg = _reg, \
- .inputs = _inputs, \
- .flags = _flags, \
- .max_rate = _max, \
- .u.periph = { \
- .clk_num = _clk_num, \
- }, \
- }
-
-#define SHARED_CLK(_name, _dev, _con, _parent) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- .ops = &tegra_clk_shared_bus_ops, \
- .parent = _parent, \
- }
-
-static struct clk tegra_list_clks[] = {
- PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 108000000, mux_pclk, 0),
- PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET),
- PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
- PERIPH_CLK("i2s1", "tegra20-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("i2s2", "tegra20-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71),
- PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71 | MUX_PWM),
- PERIPH_CLK("spi", "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("xio", "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("twc", "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("ide", "ide", NULL, 25, 0x144, 100000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("ndflash", "tegra_nand", NULL, 13, 0x160, 164000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("vcp", "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("bsea", "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("bsev", "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("vde", "tegra-avp", "vde", 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */
- /* FIXME: what is la? */
- PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("owr", "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16),
- PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16),
- PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16),
- PERIPH_CLK("dvc", "tegra-i2c.3", NULL, 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16),
- PERIPH_CLK("i2c1_i2c", "tegra-i2c.0", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
- PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("vi", "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
- PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
- PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
- PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("dsi", "dsi", NULL, 48, 0, 500000000, mux_plld, 0), /* scales with voltage */
- PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */
- PERIPH_CLK("csus", "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET),
- PERIPH_CLK("pex", NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET),
- PERIPH_CLK("afi", NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET),
- PERIPH_CLK("pcie_xclk", NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET),
-
- SHARED_CLK("avp.sclk", "tegra-avp", "sclk", &tegra_clk_sclk),
- SHARED_CLK("avp.emc", "tegra-avp", "emc", &tegra_clk_emc),
- SHARED_CLK("cpu.emc", "cpu", "emc", &tegra_clk_emc),
- SHARED_CLK("disp1.emc", "tegradc.0", "emc", &tegra_clk_emc),
- SHARED_CLK("disp2.emc", "tegradc.1", "emc", &tegra_clk_emc),
- SHARED_CLK("hdmi.emc", "hdmi", "emc", &tegra_clk_emc),
- SHARED_CLK("host.emc", "tegra_grhost", "emc", &tegra_clk_emc),
- SHARED_CLK("usbd.emc", "fsl-tegra-udc", "emc", &tegra_clk_emc),
- SHARED_CLK("usb1.emc", "tegra-ehci.0", "emc", &tegra_clk_emc),
- SHARED_CLK("usb2.emc", "tegra-ehci.1", "emc", &tegra_clk_emc),
- SHARED_CLK("usb3.emc", "tegra-ehci.2", "emc", &tegra_clk_emc),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- }
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration. List those here to register them twice in the clock lookup
- * table under two names.
- */
-static struct clk_duplicate tegra_clk_duplicates[] = {
- CLK_DUPLICATE("uarta", "serial8250.0", NULL),
- CLK_DUPLICATE("uartb", "serial8250.1", NULL),
- CLK_DUPLICATE("uartc", "serial8250.2", NULL),
- CLK_DUPLICATE("uartd", "serial8250.3", NULL),
- CLK_DUPLICATE("uarte", "serial8250.4", NULL),
- CLK_DUPLICATE("usbd", "utmip-pad", NULL),
- CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
- CLK_DUPLICATE("usbd", "tegra-otg", NULL),
- CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
- CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
- CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
- CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
- CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
- CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
- CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"),
- CLK_DUPLICATE("cop", "tegra-avp", "cop"),
- CLK_DUPLICATE("vde", "tegra-aes", "vde"),
-};
-
-#define CLK(dev, con, ck) \
- { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }
-
-static struct clk *tegra_ptr_clks[] = {
- &tegra_clk_32k,
- &tegra_pll_s,
- &tegra_clk_m,
- &tegra_pll_m,
- &tegra_pll_m_out1,
- &tegra_pll_c,
- &tegra_pll_c_out1,
- &tegra_pll_p,
- &tegra_pll_p_out1,
- &tegra_pll_p_out2,
- &tegra_pll_p_out3,
- &tegra_pll_p_out4,
- &tegra_pll_a,
- &tegra_pll_a_out0,
- &tegra_pll_d,
- &tegra_pll_d_out0,
- &tegra_pll_u,
- &tegra_pll_x,
- &tegra_pll_e,
- &tegra_clk_cclk,
- &tegra_clk_sclk,
- &tegra_clk_hclk,
- &tegra_clk_pclk,
- &tegra_clk_d,
- &tegra_clk_cdev1,
- &tegra_clk_cdev2,
- &tegra_clk_virtual_cpu,
- &tegra_clk_blink,
- &tegra_clk_cop,
- &tegra_clk_emc,
-};
-
-static void tegra2_init_one_clock(struct clk *c)
-{
- clk_init(c);
- INIT_LIST_HEAD(&c->shared_bus_list);
- if (!c->lookup.dev_id && !c->lookup.con_id)
- c->lookup.con_id = c->name;
- c->lookup.clk = c;
- clkdev_add(&c->lookup);
-}
-
-void __init tegra2_init_clocks(void)
-{
- int i;
- struct clk *c;
-
- for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
- tegra2_init_one_clock(tegra_ptr_clks[i]);
-
- for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
- tegra2_init_one_clock(&tegra_list_clks[i]);
-
- for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
- c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
- if (!c) {
- pr_err("%s: Unknown duplicate clock %s\n", __func__,
- tegra_clk_duplicates[i].name);
- continue;
- }
-
- tegra_clk_duplicates[i].lookup.clk = c;
- clkdev_add(&tegra_clk_duplicates[i].lookup);
- }
-
- init_audio_sync_clock_mux();
-}
-
-#ifdef CONFIG_PM
-static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM +
- PERIPH_CLK_SOURCE_NUM + 22];
-
-void tegra_clk_suspend(void)
-{
- unsigned long off, i;
- u32 *ctx = clk_rst_suspend;
-
- *ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK;
- *ctx++ = clk_readl(tegra_pll_c.reg + PLL_BASE);
- *ctx++ = clk_readl(tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
- *ctx++ = clk_readl(tegra_pll_a.reg + PLL_BASE);
- *ctx++ = clk_readl(tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
- *ctx++ = clk_readl(tegra_pll_s.reg + PLL_BASE);
- *ctx++ = clk_readl(tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
- *ctx++ = clk_readl(tegra_pll_d.reg + PLL_BASE);
- *ctx++ = clk_readl(tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
- *ctx++ = clk_readl(tegra_pll_u.reg + PLL_BASE);
- *ctx++ = clk_readl(tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
-
- *ctx++ = clk_readl(tegra_pll_m_out1.reg);
- *ctx++ = clk_readl(tegra_pll_a_out0.reg);
- *ctx++ = clk_readl(tegra_pll_c_out1.reg);
-
- *ctx++ = clk_readl(tegra_clk_cclk.reg);
- *ctx++ = clk_readl(tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
- *ctx++ = clk_readl(tegra_clk_sclk.reg);
- *ctx++ = clk_readl(tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
- *ctx++ = clk_readl(tegra_clk_pclk.reg);
-
- *ctx++ = clk_readl(tegra_clk_audio.reg);
-
- for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
- off += 4) {
- if (off == PERIPH_CLK_SOURCE_EMC)
- continue;
- *ctx++ = clk_readl(off);
- }
-
- off = RST_DEVICES;
- for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
- *ctx++ = clk_readl(off);
-
- off = CLK_OUT_ENB;
- for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
- *ctx++ = clk_readl(off);
-
- *ctx++ = clk_readl(MISC_CLK_ENB);
- *ctx++ = clk_readl(CLK_MASK_ARM);
-
- BUG_ON(ctx - clk_rst_suspend != ARRAY_SIZE(clk_rst_suspend));
-}
-
-void tegra_clk_resume(void)
-{
- unsigned long off, i;
- const u32 *ctx = clk_rst_suspend;
- u32 val;
-
- val = clk_readl(OSC_CTRL) & ~OSC_CTRL_MASK;
- val |= *ctx++;
- clk_writel(val, OSC_CTRL);
-
- clk_writel(*ctx++, tegra_pll_c.reg + PLL_BASE);
- clk_writel(*ctx++, tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
- clk_writel(*ctx++, tegra_pll_a.reg + PLL_BASE);
- clk_writel(*ctx++, tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
- clk_writel(*ctx++, tegra_pll_s.reg + PLL_BASE);
- clk_writel(*ctx++, tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
- clk_writel(*ctx++, tegra_pll_d.reg + PLL_BASE);
- clk_writel(*ctx++, tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
- clk_writel(*ctx++, tegra_pll_u.reg + PLL_BASE);
- clk_writel(*ctx++, tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
- udelay(1000);
-
- clk_writel(*ctx++, tegra_pll_m_out1.reg);
- clk_writel(*ctx++, tegra_pll_a_out0.reg);
- clk_writel(*ctx++, tegra_pll_c_out1.reg);
-
- clk_writel(*ctx++, tegra_clk_cclk.reg);
- clk_writel(*ctx++, tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
- clk_writel(*ctx++, tegra_clk_sclk.reg);
- clk_writel(*ctx++, tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
- clk_writel(*ctx++, tegra_clk_pclk.reg);
-
- clk_writel(*ctx++, tegra_clk_audio.reg);
-
- /* enable all clocks before configuring clock sources */
- clk_writel(0xbffffff9ul, CLK_OUT_ENB);
- clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4);
- clk_writel(0x77f01bfful, CLK_OUT_ENB + 8);
- wmb();
-
- for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
- off += 4) {
- if (off == PERIPH_CLK_SOURCE_EMC)
- continue;
- clk_writel(*ctx++, off);
- }
- wmb();
-
- off = RST_DEVICES;
- for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
- clk_writel(*ctx++, off);
- wmb();
-
- off = CLK_OUT_ENB;
- for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
- clk_writel(*ctx++, off);
- wmb();
-
- clk_writel(*ctx++, MISC_CLK_ENB);
- clk_writel(*ctx++, CLK_MASK_ARM);
-}
-#endif
/*
* arch/arm/mach-tegra/tegra30_clocks.c
*
- * Copyright (c) 2010-2011 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "clock.h"
#include "fuse.h"
+#include "tegra_cpu_car.h"
#define USE_PLL_LOCK_BITS 0
/* FIXME: recommended safety delay after lock is detected */
#define PLL_POST_LOCK_DELAY 100
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344
+#define TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c
+#define TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
+
+#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
+#define CPU_RESET(cpu) (0x1111ul << (cpu))
+
/**
* Structure defining the fields for USB UTMI clocks Parameters.
*/
static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
#define clk_writel(value, reg) \
- __raw_writel(value, (u32)reg_clk_base + (reg))
+ __raw_writel(value, reg_clk_base + (reg))
#define clk_readl(reg) \
- __raw_readl((u32)reg_clk_base + (reg))
+ __raw_readl(reg_clk_base + (reg))
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
#define chipid_readl() \
- __raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV)
+ __raw_readl(misc_gp_hidrev_base + MISC_GP_HIDREV)
#define clk_writel_delay(value, reg) \
do { \
- __raw_writel((value), (u32)reg_clk_base + (reg)); \
+ __raw_writel((value), reg_clk_base + (reg)); \
udelay(2); \
} while (0)
-
-static inline int clk_set_div(struct clk *c, u32 n)
+static inline int clk_set_div(struct clk_tegra *c, u32 n)
{
- return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n);
+ struct clk *clk = c->hw.clk;
+
+ return clk_set_rate(clk,
+ (__clk_get_rate(__clk_get_parent(clk)) + n - 1) / n);
}
static inline u32 periph_clk_to_reg(
- struct clk *c, u32 reg_L, u32 reg_V, int offs)
+ struct clk_tegra *c, u32 reg_L, u32 reg_V, int offs)
{
u32 reg = c->u.periph.clk_num / 32;
BUG_ON(reg >= RST_DEVICES_NUM);
return divider_u16 - 1;
}
+static unsigned long tegra30_clk_fixed_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra30_clk_32k_ops = {
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
+};
+
/* clk_m functions */
-static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
+static unsigned long tegra30_clk_m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ if (!to_clk_tegra(hw)->fixed_rate)
+ to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq();
+ return to_clk_tegra(hw)->fixed_rate;
+}
+
+static void tegra30_clk_m_init(struct clk_hw *hw)
{
u32 osc_ctrl = clk_readl(OSC_CTRL);
u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
- c->rate = clk_measure_input_freq();
- switch (c->rate) {
+ switch (to_clk_tegra(hw)->fixed_rate) {
case 12000000:
auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
break;
default:
- pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+ pr_err("%s: Unexpected clock rate %ld", __func__,
+ to_clk_tegra(hw)->fixed_rate);
BUG();
}
clk_writel(auto_clock_control, OSC_CTRL);
- return c->rate;
}
-static void tegra30_clk_m_init(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
- tegra30_clk_m_autodetect_rate(c);
-}
+struct clk_ops tegra30_clk_m_ops = {
+ .init = tegra30_clk_m_init,
+ .recalc_rate = tegra30_clk_m_recalc_rate,
+};
-static int tegra30_clk_m_enable(struct clk *c)
+static unsigned long tegra30_clk_m_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- pr_debug("%s on clock %s\n", __func__, c->name);
- return 0;
-}
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
-static void tegra30_clk_m_disable(struct clk *c)
-{
- pr_debug("%s on clock %s\n", __func__, c->name);
- WARN(1, "Attempting to disable main SoC clock\n");
-}
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
-static struct clk_ops tegra_clk_m_ops = {
- .init = tegra30_clk_m_init,
- .enable = tegra30_clk_m_enable,
- .disable = tegra30_clk_m_disable,
-};
+ return rate;
+}
-static struct clk_ops tegra_clk_m_div_ops = {
- .enable = tegra30_clk_m_enable,
+struct clk_ops tegra_clk_m_div_ops = {
+ .recalc_rate = tegra30_clk_m_div_recalc_rate,
};
/* PLL reference divider functions */
-static void tegra30_pll_ref_init(struct clk *c)
+static unsigned long tegra30_pll_ref_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long rate = parent_rate;
u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
- pr_debug("%s on clock %s\n", __func__, c->name);
switch (pll_ref_div) {
case OSC_CTRL_PLL_REF_DIV_1:
BUG();
}
c->mul = 1;
- c->state = ON;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
}
-static struct clk_ops tegra_pll_ref_ops = {
- .init = tegra30_pll_ref_init,
- .enable = tegra30_clk_m_enable,
- .disable = tegra30_clk_m_disable,
+struct clk_ops tegra_pll_ref_ops = {
+ .recalc_rate = tegra30_pll_ref_recalc_rate,
};
/* super clock functions */
* only when its parent is a fixed rate PLL, since we can't change PLL rate
* in this case.
*/
-static void tegra30_super_clk_init(struct clk *c)
+static void tegra30_super_clk_init(struct clk_hw *hw)
{
- u32 val;
- int source;
- int shift;
- const struct clk_mux_sel *sel;
- val = clk_readl(c->reg + SUPER_CLK_MUX);
- c->state = ON;
- BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
- ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
- shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
- SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
- source = (val >> shift) & SUPER_SOURCE_MASK;
- if (c->flags & DIV_2)
- source |= val & SUPER_LP_DIV2_BYPASS;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->value == source)
- break;
- }
- BUG_ON(sel->input == NULL);
- c->parent = sel->input;
+ struct clk_tegra *c = to_clk_tegra(hw);
+ struct clk_tegra *p =
+ to_clk_tegra(__clk_get_hw(__clk_get_parent(hw->clk)));
+ c->state = ON;
if (c->flags & DIV_U71) {
/* Init safe 7.1 divider value (does not affect PLLX path) */
clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
c->reg + SUPER_CLK_DIVIDER);
c->mul = 2;
c->div = 2;
- if (!(c->parent->flags & PLLX))
+ if (!(p->flags & PLLX))
c->div += SUPER_CLOCK_DIV_U71_MIN;
} else
clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
}
-static int tegra30_super_clk_enable(struct clk *c)
+static u8 tegra30_super_clk_get_parent(struct clk_hw *hw)
{
- return 0;
-}
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+ int source;
+ int shift;
-static void tegra30_super_clk_disable(struct clk *c)
-{
- /* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and
- geared up g-mode super clock - mode switch may request to disable
- either of them; accept request with no affect on h/w */
+ val = clk_readl(c->reg + SUPER_CLK_MUX);
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+ SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+ source = (val >> shift) & SUPER_SOURCE_MASK;
+ if (c->flags & DIV_2)
+ source |= val & SUPER_LP_DIV2_BYPASS;
+
+ return source;
}
-static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_super_clk_set_parent(struct clk_hw *hw, u8 index)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ struct clk_tegra *p =
+ to_clk_tegra(__clk_get_hw(clk_get_parent(hw->clk)));
u32 val;
- const struct clk_mux_sel *sel;
int shift;
val = clk_readl(c->reg + SUPER_CLK_MUX);
((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- /* For LP mode super-clock switch between PLLX direct
- and divided-by-2 outputs is allowed only when other
- than PLLX clock source is current parent */
- if ((c->flags & DIV_2) && (p->flags & PLLX) &&
- ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) {
- if (c->parent->flags & PLLX)
- return -EINVAL;
- val ^= SUPER_LP_DIV2_BYPASS;
- clk_writel_delay(val, c->reg);
- }
- val &= ~(SUPER_SOURCE_MASK << shift);
- val |= (sel->value & SUPER_SOURCE_MASK) << shift;
-
- /* 7.1 divider for CPU super-clock does not affect
- PLLX path */
- if (c->flags & DIV_U71) {
- u32 div = 0;
- if (!(p->flags & PLLX)) {
- div = clk_readl(c->reg +
- SUPER_CLK_DIVIDER);
- div &= SUPER_CLOCK_DIV_U71_MASK;
- div >>= SUPER_CLOCK_DIV_U71_SHIFT;
- }
- c->div = div + 2;
- c->mul = 2;
- }
-
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel_delay(val, c->reg);
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
+ /* For LP mode super-clock switch between PLLX direct
+ and divided-by-2 outputs is allowed only when other
+ than PLLX clock source is current parent */
+ if ((c->flags & DIV_2) && (p->flags & PLLX) &&
+ ((index ^ val) & SUPER_LP_DIV2_BYPASS)) {
+ if (p->flags & PLLX)
+ return -EINVAL;
+ val ^= SUPER_LP_DIV2_BYPASS;
+ clk_writel_delay(val, c->reg);
+ }
+ val &= ~(SUPER_SOURCE_MASK << shift);
+ val |= (index & SUPER_SOURCE_MASK) << shift;
- clk_reparent(c, p);
- return 0;
+ /* 7.1 divider for CPU super-clock does not affect
+ PLLX path */
+ if (c->flags & DIV_U71) {
+ u32 div = 0;
+ if (!(p->flags & PLLX)) {
+ div = clk_readl(c->reg +
+ SUPER_CLK_DIVIDER);
+ div &= SUPER_CLOCK_DIV_U71_MASK;
+ div >>= SUPER_CLOCK_DIV_U71_SHIFT;
}
+ c->div = div + 2;
+ c->mul = 2;
}
- return -EINVAL;
+ clk_writel_delay(val, c->reg);
+
+ return 0;
}
/*
* rate of this PLL can't be changed, and it has many other children. In
* this case use 7.1 fractional divider to adjust the super clock rate.
*/
-static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_super_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
- if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) {
- int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate,
+ struct clk_tegra *c = to_clk_tegra(hw);
+ struct clk *parent = __clk_get_parent(hw->clk);
+ struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
+
+ if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
+ int div = clk_div71_get_divider(parent_rate,
rate, c->flags, ROUND_DIVIDER_DOWN);
div = max(div, SUPER_CLOCK_DIV_U71_MIN);
c->mul = 2;
return 0;
}
- return clk_set_rate(c->parent, rate);
+ return 0;
+}
+
+static unsigned long tegra30_super_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+static long tegra30_super_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ struct clk *parent = __clk_get_parent(hw->clk);
+ struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
+ int mul = 2;
+ int div;
+
+ if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
+ div = clk_div71_get_divider(*prate,
+ rate, c->flags, ROUND_DIVIDER_DOWN);
+ div = max(div, SUPER_CLOCK_DIV_U71_MIN) + 2;
+ rate = *prate * mul;
+ rate += div - 1; /* round up */
+ do_div(rate, c->div);
+
+ return rate;
+ }
+ return *prate;
}
-static struct clk_ops tegra_super_ops = {
- .init = tegra30_super_clk_init,
- .enable = tegra30_super_clk_enable,
- .disable = tegra30_super_clk_disable,
- .set_parent = tegra30_super_clk_set_parent,
- .set_rate = tegra30_super_clk_set_rate,
+struct clk_ops tegra30_super_ops = {
+ .init = tegra30_super_clk_init,
+ .set_parent = tegra30_super_clk_set_parent,
+ .get_parent = tegra30_super_clk_get_parent,
+ .recalc_rate = tegra30_super_clk_recalc_rate,
+ .round_rate = tegra30_super_clk_round_rate,
+ .set_rate = tegra30_super_clk_set_rate,
};
-static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate)
+static unsigned long tegra30_twd_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- /* The input value 'rate' is the clock rate of the CPU complex. */
- c->rate = (rate * c->mul) / c->div;
- return 0;
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
}
-static struct clk_ops tegra30_twd_ops = {
- .set_rate = tegra30_twd_clk_set_rate,
+struct clk_ops tegra30_twd_ops = {
+ .recalc_rate = tegra30_twd_clk_recalc_rate,
};
/* Blink output functions */
-
-static void tegra30_blink_clk_init(struct clk *c)
+static int tegra30_blink_clk_is_enabled(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
val = pmc_readl(PMC_CTRL);
c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
- c->mul = 1;
- val = pmc_readl(c->reg);
-
- if (val & PMC_BLINK_TIMER_ENB) {
- unsigned int on_off;
-
- on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
- PMC_BLINK_TIMER_DATA_ON_MASK;
- val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
- val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
- on_off += val;
- /* each tick in the blink timer is 4 32KHz clocks */
- c->div = on_off * 4;
- } else {
- c->div = 1;
- }
+ return c->state;
}
-static int tegra30_blink_clk_enable(struct clk *c)
+static int tegra30_blink_clk_enable(struct clk_hw *hw)
{
u32 val;
return 0;
}
-static void tegra30_blink_clk_disable(struct clk *c)
+static void tegra30_blink_clk_disable(struct clk_hw *hw)
{
u32 val;
pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
}
-static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
- unsigned long parent_rate = clk_get_rate(c->parent);
+ struct clk_tegra *c = to_clk_tegra(hw);
+
if (rate >= parent_rate) {
c->div = 1;
pmc_writel(0, c->reg);
return 0;
}
-static struct clk_ops tegra_blink_clk_ops = {
- .init = &tegra30_blink_clk_init,
- .enable = &tegra30_blink_clk_enable,
- .disable = &tegra30_blink_clk_disable,
- .set_rate = &tegra30_blink_clk_set_rate,
-};
+static unsigned long tegra30_blink_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+ u32 val;
+ u32 mul;
+ u32 div;
+ u32 on_off;
-/* PLL Functions */
-static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg,
- u32 lock_bit)
+ mul = 1;
+ val = pmc_readl(c->reg);
+
+ if (val & PMC_BLINK_TIMER_ENB) {
+ on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+ PMC_BLINK_TIMER_DATA_ON_MASK;
+ val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+ val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+ on_off += val;
+ /* each tick in the blink timer is 4 32KHz clocks */
+ div = on_off * 4;
+ } else {
+ div = 1;
+ }
+
+ if (mul != 0 && div != 0) {
+ rate *= mul;
+ rate += div - 1; /* round up */
+ do_div(rate, div);
+ }
+ return rate;
+}
+
+static long tegra30_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
{
-#if USE_PLL_LOCK_BITS
- int i;
- for (i = 0; i < c->u.pll.lock_delay; i++) {
- if (clk_readl(lock_reg) & lock_bit) {
- udelay(PLL_POST_LOCK_DELAY);
- return 0;
- }
- udelay(2); /* timeout = 2 * lock time */
+ int div;
+ int mul;
+ long round_rate = *prate;
+
+ mul = 1;
+
+ if (rate >= *prate) {
+ div = 1;
+ } else {
+ div = DIV_ROUND_UP(*prate / 8, rate);
+ div *= 8;
}
- pr_err("Timed out waiting for lock bit on pll %s", c->name);
- return -1;
-#endif
- udelay(c->u.pll.lock_delay);
- return 0;
+ round_rate *= mul;
+ round_rate += div - 1;
+ do_div(round_rate, div);
+
+ return round_rate;
}
+struct clk_ops tegra30_blink_clk_ops = {
+ .is_enabled = tegra30_blink_clk_is_enabled,
+ .enable = tegra30_blink_clk_enable,
+ .disable = tegra30_blink_clk_disable,
+ .recalc_rate = tegra30_blink_clk_recalc_rate,
+ .round_rate = tegra30_blink_clk_round_rate,
+ .set_rate = tegra30_blink_clk_set_rate,
+};
-static void tegra30_utmi_param_configure(struct clk *c)
+static void tegra30_utmi_param_configure(struct clk_hw *hw)
{
+ unsigned long main_rate =
+ __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
u32 reg;
int i;
- unsigned long main_rate =
- clk_get_rate(c->parent->parent);
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (main_rate == utmi_parameters[i].osc_frequency)
clk_writel(reg, UTMIP_PLL_CFG1);
}
-static void tegra30_pll_clk_init(struct clk *c)
+/* PLL Functions */
+static int tegra30_pll_clk_wait_for_lock(struct clk_tegra *c, u32 lock_reg,
+ u32 lock_bit)
+{
+ int ret = 0;
+
+#if USE_PLL_LOCK_BITS
+ int i;
+ for (i = 0; i < c->u.pll.lock_delay; i++) {
+ if (clk_readl(lock_reg) & lock_bit) {
+ udelay(PLL_POST_LOCK_DELAY);
+ return 0;
+ }
+ udelay(2); /* timeout = 2 * lock time */
+ }
+ pr_err("Timed out waiting for lock bit on pll %s",
+ __clk_get_name(hw->clk));
+ ret = -1;
+#else
+ udelay(c->u.pll.lock_delay);
+#endif
+ return ret;
+}
+
+static int tegra30_pll_clk_is_enabled(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = clk_readl(c->reg + PLL_BASE);
c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+ return c->state;
+}
- if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
- const struct clk_pll_freq_table *sel;
- unsigned long input_rate = clk_get_rate(c->parent);
- for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
- if (sel->input_rate == input_rate &&
- sel->output_rate == c->u.pll.fixed_rate) {
- c->mul = sel->n;
- c->div = sel->m * sel->p;
- return;
- }
- }
- pr_err("Clock %s has unknown fixed frequency\n", c->name);
- BUG();
- } else if (val & PLL_BASE_BYPASS) {
- c->mul = 1;
- c->div = 1;
- } else {
- c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
- c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
- if (c->flags & PLLU)
- c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
- else
- c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
- PLL_BASE_DIVP_SHIFT));
- if (c->flags & PLL_FIXED) {
- unsigned long rate = clk_get_rate_locked(c);
- BUG_ON(rate != c->u.pll.fixed_rate);
- }
- }
+static void tegra30_pll_clk_init(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
if (c->flags & PLLU)
- tegra30_utmi_param_configure(c);
+ tegra30_utmi_param_configure(hw);
}
-static int tegra30_pll_clk_enable(struct clk *c)
+static int tegra30_pll_clk_enable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
- pr_debug("%s on clock %s\n", __func__, c->name);
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
#if USE_PLL_LOCK_BITS
val = clk_readl(c->reg + PLL_MISC(c));
return 0;
}
-static void tegra30_pll_clk_disable(struct clk *c)
+static void tegra30_pll_clk_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
- pr_debug("%s on clock %s\n", __func__, c->name);
+ pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
val = clk_readl(c->reg);
val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
}
}
-static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val, p_div, old_base;
unsigned long input_rate;
const struct clk_pll_freq_table *sel;
struct clk_pll_freq_table cfg;
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
if (c->flags & PLL_FIXED) {
int ret = 0;
if (rate != c->u.pll.fixed_rate) {
pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
- __func__, c->name, c->u.pll.fixed_rate, rate);
+ __func__, __clk_get_name(hw->clk),
+ c->u.pll.fixed_rate, rate);
ret = -EINVAL;
}
return ret;
}
if (c->flags & PLLM) {
- if (rate != clk_get_rate_locked(c)) {
+ if (rate != __clk_get_rate(hw->clk)) {
pr_err("%s: Can not change memory %s rate in flight\n",
- __func__, c->name);
+ __func__, __clk_get_name(hw->clk));
return -EINVAL;
}
- return 0;
}
p_div = 0;
- input_rate = clk_get_rate(c->parent);
+ input_rate = parent_rate;
/* Check if the target rate is tabulated */
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
(p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
(cfg.output_rate > c->u.pll.vco_max)) {
pr_err("%s: Failed to set %s out-of-table rate %lu\n",
- __func__, c->name, rate);
+ __func__, __clk_get_name(hw->clk), rate);
return -EINVAL;
}
p_div <<= PLL_BASE_DIVP_SHIFT;
return 0;
if (c->state == ON) {
- tegra30_pll_clk_disable(c);
+ tegra30_pll_clk_disable(hw);
val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
}
clk_writel(val, c->reg + PLL_BASE);
}
if (c->state == ON)
- tegra30_pll_clk_enable(c);
-
- return 0;
-}
-
-static struct clk_ops tegra_pll_ops = {
- .init = tegra30_pll_clk_init,
- .enable = tegra30_pll_clk_enable,
- .disable = tegra30_pll_clk_disable,
- .set_rate = tegra30_pll_clk_set_rate,
-};
-
-static int
-tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
- u32 val, mask, reg;
+ tegra30_pll_clk_enable(hw);
- switch (p) {
- case TEGRA_CLK_PLLD_CSI_OUT_ENB:
- mask = PLLD_BASE_CSI_CLKENABLE;
- reg = c->reg + PLL_BASE;
- break;
- case TEGRA_CLK_PLLD_DSI_OUT_ENB:
- mask = PLLD_MISC_DSI_CLKENABLE;
- reg = c->reg + PLL_MISC(c);
- break;
- case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
- if (!(c->flags & PLL_ALT_MISC_REG)) {
- mask = PLLD_BASE_DSIB_MUX_MASK;
- reg = c->reg + PLL_BASE;
- break;
- }
- /* fall through - error since PLLD2 does not have MUX_SEL control */
- default:
- return -EINVAL;
- }
+ c->u.pll.fixed_rate = rate;
- val = clk_readl(reg);
- if (setting)
- val |= mask;
- else
- val &= ~mask;
- clk_writel(val, reg);
return 0;
}
-static struct clk_ops tegra_plld_ops = {
- .init = tegra30_pll_clk_init,
- .enable = tegra30_pll_clk_enable,
- .disable = tegra30_pll_clk_disable,
- .set_rate = tegra30_pll_clk_set_rate,
- .clk_cfg_ex = tegra30_plld_clk_cfg_ex,
-};
-
-static void tegra30_plle_clk_init(struct clk *c)
+static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long input_rate = *prate;
+ unsigned long output_rate = *prate;
+ const struct clk_pll_freq_table *sel;
+ struct clk_pll_freq_table cfg;
+ int mul;
+ int div;
+ u32 p_div;
u32 val;
- val = clk_readl(PLLE_AUX);
- c->parent = (val & PLLE_AUX_PLLP_SEL) ?
- tegra_get_clock_by_name("pll_p") :
- tegra_get_clock_by_name("pll_ref");
+ if (c->flags & PLL_FIXED)
+ return c->u.pll.fixed_rate;
- val = clk_readl(c->reg + PLL_BASE);
- c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
- c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
- c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
- c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
-}
+ if (c->flags & PLLM)
+ return __clk_get_rate(hw->clk);
-static void tegra30_plle_clk_disable(struct clk *c)
-{
- u32 val;
- pr_debug("%s on clock %s\n", __func__, c->name);
+ p_div = 0;
+ /* Check if the target rate is tabulated */
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == input_rate && sel->output_rate == rate) {
+ if (c->flags & PLLU) {
+ BUG_ON(sel->p < 1 || sel->p > 2);
+ if (sel->p == 1)
+ p_div = PLLU_BASE_POST_DIV;
+ } else {
+ BUG_ON(sel->p < 1);
+ for (val = sel->p; val > 1; val >>= 1)
+ p_div++;
+ p_div <<= PLL_BASE_DIVP_SHIFT;
+ }
+ break;
+ }
+ }
- val = clk_readl(c->reg + PLL_BASE);
- val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
- clk_writel(val, c->reg + PLL_BASE);
-}
+ if (sel->input_rate == 0) {
+ unsigned long cfreq;
+ BUG_ON(c->flags & PLLU);
+ sel = &cfg;
-static void tegra30_plle_training(struct clk *c)
+ switch (input_rate) {
+ case 12000000:
+ case 26000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
+ break;
+ case 13000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
+ break;
+ case 16800000:
+ case 19200000:
+ cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, input_rate);
+ BUG();
+ }
+
+ /* Raise VCO to guarantee 0.5% accuracy */
+ for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
+ cfg.output_rate <<= 1)
+ p_div++;
+
+ cfg.p = 0x1 << p_div;
+ cfg.m = input_rate / cfreq;
+ cfg.n = cfg.output_rate / cfreq;
+ }
+
+ mul = sel->n;
+ div = sel->m * sel->p;
+
+ output_rate *= mul;
+ output_rate += div - 1; /* round up */
+ do_div(output_rate, div);
+
+ return output_rate;
+}
+
+static unsigned long tegra30_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+ u32 val = clk_readl(c->reg + PLL_BASE);
+
+ if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+ const struct clk_pll_freq_table *sel;
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == parent_rate &&
+ sel->output_rate == c->u.pll.fixed_rate) {
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+ break;
+ }
+ }
+ pr_err("Clock %s has unknown fixed frequency\n",
+ __clk_get_name(hw->clk));
+ BUG();
+ } else if (val & PLL_BASE_BYPASS) {
+ c->mul = 1;
+ c->div = 1;
+ } else {
+ c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+ c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+ if (c->flags & PLLU)
+ c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+ else
+ c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
+ PLL_BASE_DIVP_SHIFT));
+ }
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+struct clk_ops tegra30_pll_ops = {
+ .is_enabled = tegra30_pll_clk_is_enabled,
+ .init = tegra30_pll_clk_init,
+ .enable = tegra30_pll_clk_enable,
+ .disable = tegra30_pll_clk_disable,
+ .recalc_rate = tegra30_pll_recalc_rate,
+ .round_rate = tegra30_pll_round_rate,
+ .set_rate = tegra30_pll_clk_set_rate,
+};
+
+int tegra30_plld_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val, mask, reg;
+
+ switch (p) {
+ case TEGRA_CLK_PLLD_CSI_OUT_ENB:
+ mask = PLLD_BASE_CSI_CLKENABLE;
+ reg = c->reg + PLL_BASE;
+ break;
+ case TEGRA_CLK_PLLD_DSI_OUT_ENB:
+ mask = PLLD_MISC_DSI_CLKENABLE;
+ reg = c->reg + PLL_MISC(c);
+ break;
+ case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
+ if (!(c->flags & PLL_ALT_MISC_REG)) {
+ mask = PLLD_BASE_DSIB_MUX_MASK;
+ reg = c->reg + PLL_BASE;
+ break;
+ }
+ /* fall through - error since PLLD2 does not have MUX_SEL control */
+ default:
+ return -EINVAL;
+ }
+
+ val = clk_readl(reg);
+ if (setting)
+ val |= mask;
+ else
+ val &= ~mask;
+ clk_writel(val, reg);
+ return 0;
+}
+
+static int tegra30_plle_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ val = clk_readl(c->reg + PLL_BASE);
+ c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
+ return c->state;
+}
+
+static void tegra30_plle_clk_disable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val;
+
+ val = clk_readl(c->reg + PLL_BASE);
+ val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
+ clk_writel(val, c->reg + PLL_BASE);
+}
+
+static void tegra30_plle_training(struct clk_tegra *c)
{
u32 val;
} while (!(val & PLLE_MISC_READY));
}
-static int tegra30_plle_configure(struct clk *c, bool force_training)
+static int tegra30_plle_configure(struct clk_hw *hw, bool force_training)
{
- u32 val;
+ struct clk_tegra *c = to_clk_tegra(hw);
+ struct clk *parent = __clk_get_parent(hw->clk);
const struct clk_pll_freq_table *sel;
+ u32 val;
+
unsigned long rate = c->u.pll.fixed_rate;
- unsigned long input_rate = clk_get_rate(c->parent);
+ unsigned long input_rate = __clk_get_rate(parent);
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
if (sel->input_rate == input_rate && sel->output_rate == rate)
return -ENOSYS;
/* disable PLLE, clear setup fiels */
- tegra30_plle_clk_disable(c);
+ tegra30_plle_clk_disable(hw);
val = clk_readl(c->reg + PLL_MISC(c));
val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
return 0;
}
-static int tegra30_plle_clk_enable(struct clk *c)
+static int tegra30_plle_clk_enable(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
+ return tegra30_plle_configure(hw, !c->set);
+}
+
+static unsigned long tegra30_plle_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- pr_debug("%s on clock %s\n", __func__, c->name);
- return tegra30_plle_configure(c, !c->set);
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long rate = parent_rate;
+ u32 val;
+
+ val = clk_readl(c->reg + PLL_BASE);
+ c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
+ c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
+ c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+ return rate;
}
-static struct clk_ops tegra_plle_ops = {
- .init = tegra30_plle_clk_init,
- .enable = tegra30_plle_clk_enable,
- .disable = tegra30_plle_clk_disable,
+struct clk_ops tegra30_plle_ops = {
+ .is_enabled = tegra30_plle_clk_is_enabled,
+ .enable = tegra30_plle_clk_enable,
+ .disable = tegra30_plle_clk_disable,
+ .recalc_rate = tegra30_plle_clk_recalc_rate,
};
/* Clock divider ops */
-static void tegra30_pll_div_clk_init(struct clk *c)
+static int tegra30_pll_div_clk_is_enabled(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
if (c->flags & DIV_U71) {
- u32 divu71;
u32 val = clk_readl(c->reg);
val >>= c->reg_shift;
c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
if (!(val & PLL_OUT_RESET_DISABLE))
c->state = OFF;
-
- divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
- c->div = (divu71 + 2);
- c->mul = 2;
- } else if (c->flags & DIV_2) {
- c->state = ON;
- if (c->flags & (PLLD | PLLX)) {
- c->div = 2;
- c->mul = 1;
- } else
- BUG();
} else {
c->state = ON;
- c->div = 1;
- c->mul = 1;
}
+ return c->state;
}
-static int tegra30_pll_div_clk_enable(struct clk *c)
+static int tegra30_pll_div_clk_enable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
u32 new_val;
- pr_debug("%s: %s\n", __func__, c->name);
+ pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
if (c->flags & DIV_U71) {
val = clk_readl(c->reg);
new_val = val >> c->reg_shift;
return -EINVAL;
}
-static void tegra30_pll_div_clk_disable(struct clk *c)
+static void tegra30_pll_div_clk_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
u32 new_val;
- pr_debug("%s: %s\n", __func__, c->name);
+ pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
if (c->flags & DIV_U71) {
val = clk_readl(c->reg);
new_val = val >> c->reg_shift;
}
}
-static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
u32 new_val;
int divider_u71;
- unsigned long parent_rate = clk_get_rate(c->parent);
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
if (c->flags & DIV_U71) {
divider_u71 = clk_div71_get_divider(
parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
clk_writel_delay(val, c->reg);
c->div = divider_u71 + 2;
c->mul = 2;
+ c->fixed_rate = rate;
return 0;
}
- } else if (c->flags & DIV_2)
- return clk_set_rate(c->parent, rate * 2);
+ } else if (c->flags & DIV_2) {
+ c->fixed_rate = rate;
+ return 0;
+ }
return -EINVAL;
}
-static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
+static unsigned long tegra30_pll_div_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+
+ if (c->flags & DIV_U71) {
+ u32 divu71;
+ u32 val = clk_readl(c->reg);
+ val >>= c->reg_shift;
+
+ divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+ c->div = (divu71 + 2);
+ c->mul = 2;
+ } else if (c->flags & DIV_2) {
+ if (c->flags & (PLLD | PLLX)) {
+ c->div = 2;
+ c->mul = 1;
+ } else
+ BUG();
+ } else {
+ c->div = 1;
+ c->mul = 1;
+ }
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+static long tegra30_pll_div_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long *prate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+ if (prate)
+ parent_rate = *prate;
if (c->flags & DIV_U71) {
divider = clk_div71_get_divider(
if (divider < 0)
return divider;
return DIV_ROUND_UP(parent_rate * 2, divider + 2);
- } else if (c->flags & DIV_2)
- /* no rounding - fixed DIV_2 dividers pass rate to parent PLL */
+ } else if (c->flags & DIV_2) {
+ *prate = rate * 2;
return rate;
+ }
return -EINVAL;
}
-static struct clk_ops tegra_pll_div_ops = {
- .init = tegra30_pll_div_clk_init,
- .enable = tegra30_pll_div_clk_enable,
- .disable = tegra30_pll_div_clk_disable,
- .set_rate = tegra30_pll_div_clk_set_rate,
- .round_rate = tegra30_pll_div_clk_round_rate,
+struct clk_ops tegra30_pll_div_ops = {
+ .is_enabled = tegra30_pll_div_clk_is_enabled,
+ .enable = tegra30_pll_div_clk_enable,
+ .disable = tegra30_pll_div_clk_disable,
+ .set_rate = tegra30_pll_div_clk_set_rate,
+ .recalc_rate = tegra30_pll_div_clk_recalc_rate,
+ .round_rate = tegra30_pll_div_clk_round_rate,
};
/* Periph clk ops */
-static inline u32 periph_clk_source_mask(struct clk *c)
+static inline u32 periph_clk_source_mask(struct clk_tegra *c)
{
if (c->flags & MUX8)
return 7 << 29;
return 3 << 30;
}
-static inline u32 periph_clk_source_shift(struct clk *c)
+static inline u32 periph_clk_source_shift(struct clk_tegra *c)
{
if (c->flags & MUX8)
return 29;
return 30;
}
-static void tegra30_periph_clk_init(struct clk *c)
+static int tegra30_periph_clk_is_enabled(struct clk_hw *hw)
{
- u32 val = clk_readl(c->reg);
- const struct clk_mux_sel *mux = 0;
- const struct clk_mux_sel *sel;
- if (c->flags & MUX) {
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (((val & periph_clk_source_mask(c)) >>
- periph_clk_source_shift(c)) == sel->value)
- mux = sel;
- }
- BUG_ON(!mux);
-
- c->parent = mux->input;
- } else {
- c->parent = c->inputs[0].input;
- }
-
- if (c->flags & DIV_U71) {
- u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
- if ((c->flags & DIV_U71_UART) &&
- (!(val & PERIPH_CLK_UART_DIV_ENB))) {
- divu71 = 0;
- }
- if (c->flags & DIV_U71_IDLE) {
- val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
- PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
- val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
- PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
- clk_writel(val, c->reg);
- }
- c->div = divu71 + 2;
- c->mul = 2;
- } else if (c->flags & DIV_U16) {
- u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
- c->div = divu16 + 1;
- c->mul = 1;
- } else {
- c->div = 1;
- c->mul = 1;
- }
+ struct clk_tegra *c = to_clk_tegra(hw);
c->state = ON;
if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
if (!(c->flags & PERIPH_NO_RESET))
if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
c->state = OFF;
+ return c->state;
}
-static int tegra30_periph_clk_enable(struct clk *c)
+static int tegra30_periph_clk_enable(struct clk_hw *hw)
{
- pr_debug("%s on clock %s\n", __func__, c->name);
+ struct clk_tegra *c = to_clk_tegra(hw);
tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
return 0;
}
-static void tegra30_periph_clk_disable(struct clk *c)
+static void tegra30_periph_clk_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
unsigned long val;
- pr_debug("%s on clock %s\n", __func__, c->name);
- if (c->refcnt)
- tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+ tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+ if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0)
+ return;
- if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) {
- /* If peripheral is in the APB bus then read the APB bus to
- * flush the write operation in apb bus. This will avoid the
- * peripheral access after disabling clock*/
- if (c->flags & PERIPH_ON_APB)
- val = chipid_readl();
+ /* If peripheral is in the APB bus then read the APB bus to
+ * flush the write operation in apb bus. This will avoid the
+ * peripheral access after disabling clock*/
+ if (c->flags & PERIPH_ON_APB)
+ val = chipid_readl();
- clk_writel_delay(
- PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
- }
+ clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
}
-static void tegra30_periph_clk_reset(struct clk *c, bool assert)
+void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
unsigned long val;
- pr_debug("%s %s on clock %s\n", __func__,
- assert ? "assert" : "deassert", c->name);
if (!(c->flags & PERIPH_NO_RESET)) {
if (assert) {
}
}
-static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_periph_clk_set_parent(struct clk_hw *hw, u8 index)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
- const struct clk_mux_sel *sel;
- pr_debug("%s: %s %s\n", __func__, c->name, p->name);
if (!(c->flags & MUX))
- return (p == c->parent) ? 0 : (-EINVAL);
-
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- val = clk_readl(c->reg);
- val &= ~periph_clk_source_mask(c);
- val |= (sel->value << periph_clk_source_shift(c));
+ return (index == 0) ? 0 : (-EINVAL);
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel_delay(val, c->reg);
+ val = clk_readl(c->reg);
+ val &= ~periph_clk_source_mask(c);
+ val |= (index << periph_clk_source_shift(c));
+ clk_writel_delay(val, c->reg);
+ return 0;
+}
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
+static u8 tegra30_periph_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+ int source = (val & periph_clk_source_mask(c)) >>
+ periph_clk_source_shift(c);
- clk_reparent(c, p);
- return 0;
- }
- }
+ if (!(c->flags & MUX))
+ return 0;
- return -EINVAL;
+ return source;
}
-static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
if (c->flags & DIV_U71) {
divider = clk_div71_get_divider(
return -EINVAL;
}
-static long tegra30_periph_clk_round_rate(struct clk *c,
- unsigned long rate)
+static long tegra30_periph_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
int divider;
- unsigned long parent_rate = clk_get_rate(c->parent);
- pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+ if (prate)
+ parent_rate = *prate;
if (c->flags & DIV_U71) {
divider = clk_div71_get_divider(
return -EINVAL;
}
-static struct clk_ops tegra_periph_clk_ops = {
- .init = &tegra30_periph_clk_init,
+static unsigned long tegra30_periph_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
+ u32 val = clk_readl(c->reg);
+
+ if (c->flags & DIV_U71) {
+ u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+ if ((c->flags & DIV_U71_UART) &&
+ (!(val & PERIPH_CLK_UART_DIV_ENB))) {
+ divu71 = 0;
+ }
+ if (c->flags & DIV_U71_IDLE) {
+ val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
+ PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+ val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
+ PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+ clk_writel(val, c->reg);
+ }
+ c->div = divu71 + 2;
+ c->mul = 2;
+ } else if (c->flags & DIV_U16) {
+ u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+ c->div = divu16 + 1;
+ c->mul = 1;
+ } else {
+ c->div = 1;
+ c->mul = 1;
+ }
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+ return rate;
+}
+
+struct clk_ops tegra30_periph_clk_ops = {
+ .is_enabled = tegra30_periph_clk_is_enabled,
+ .enable = tegra30_periph_clk_enable,
+ .disable = tegra30_periph_clk_disable,
+ .set_parent = tegra30_periph_clk_set_parent,
+ .get_parent = tegra30_periph_clk_get_parent,
+ .set_rate = tegra30_periph_clk_set_rate,
+ .round_rate = tegra30_periph_clk_round_rate,
+ .recalc_rate = tegra30_periph_clk_recalc_rate,
+};
+
+static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk *d = clk_get_sys(NULL, "pll_d");
+ /* The DSIB parent selection bit is in PLLD base
+ register - can not do direct r-m-w, must be
+ protected by PLLD lock */
+ tegra_clk_cfg_ex(
+ d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
+
+ return 0;
+}
+
+struct clk_ops tegra30_dsib_clk_ops = {
+ .is_enabled = tegra30_periph_clk_is_enabled,
.enable = &tegra30_periph_clk_enable,
.disable = &tegra30_periph_clk_disable,
- .set_parent = &tegra30_periph_clk_set_parent,
+ .set_parent = &tegra30_dsib_clk_set_parent,
+ .get_parent = &tegra30_periph_clk_get_parent,
.set_rate = &tegra30_periph_clk_set_rate,
.round_rate = &tegra30_periph_clk_round_rate,
- .reset = &tegra30_periph_clk_reset,
+ .recalc_rate = &tegra30_periph_clk_recalc_rate,
};
-
/* Periph extended clock configuration ops */
-static int
-tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_vi_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
if (p == TEGRA_CLK_VI_INP_SEL) {
u32 val = clk_readl(c->reg);
val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
return -EINVAL;
}
-static struct clk_ops tegra_vi_clk_ops = {
- .init = &tegra30_periph_clk_init,
- .enable = &tegra30_periph_clk_enable,
- .disable = &tegra30_periph_clk_disable,
- .set_parent = &tegra30_periph_clk_set_parent,
- .set_rate = &tegra30_periph_clk_set_rate,
- .round_rate = &tegra30_periph_clk_round_rate,
- .clk_cfg_ex = &tegra30_vi_clk_cfg_ex,
- .reset = &tegra30_periph_clk_reset,
-};
-
-static int
-tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_nand_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
u32 val = clk_readl(c->reg);
if (setting)
return -EINVAL;
}
-static struct clk_ops tegra_nand_clk_ops = {
- .init = &tegra30_periph_clk_init,
- .enable = &tegra30_periph_clk_enable,
- .disable = &tegra30_periph_clk_disable,
- .set_parent = &tegra30_periph_clk_set_parent,
- .set_rate = &tegra30_periph_clk_set_rate,
- .round_rate = &tegra30_periph_clk_round_rate,
- .clk_cfg_ex = &tegra30_nand_clk_cfg_ex,
- .reset = &tegra30_periph_clk_reset,
-};
-
-
-static int
-tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
if (p == TEGRA_CLK_DTV_INVERT) {
u32 val = clk_readl(c->reg);
if (setting)
return -EINVAL;
}
-static struct clk_ops tegra_dtv_clk_ops = {
- .init = &tegra30_periph_clk_init,
- .enable = &tegra30_periph_clk_enable,
- .disable = &tegra30_periph_clk_disable,
- .set_parent = &tegra30_periph_clk_set_parent,
- .set_rate = &tegra30_periph_clk_set_rate,
- .round_rate = &tegra30_periph_clk_round_rate,
- .clk_cfg_ex = &tegra30_dtv_clk_cfg_ex,
- .reset = &tegra30_periph_clk_reset,
-};
-
-static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p)
-{
- const struct clk_mux_sel *sel;
- struct clk *d = tegra_get_clock_by_name("pll_d");
-
- pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- if (c->refcnt)
- clk_enable(p);
-
- /* The DSIB parent selection bit is in PLLD base
- register - can not do direct r-m-w, must be
- protected by PLLD lock */
- tegra_clk_cfg_ex(
- d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value);
-
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
-
- clk_reparent(c, p);
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
-static struct clk_ops tegra_dsib_clk_ops = {
- .init = &tegra30_periph_clk_init,
- .enable = &tegra30_periph_clk_enable,
- .disable = &tegra30_periph_clk_disable,
- .set_parent = &tegra30_dsib_clk_set_parent,
- .set_rate = &tegra30_periph_clk_set_rate,
- .round_rate = &tegra30_periph_clk_round_rate,
- .reset = &tegra30_periph_clk_reset,
-};
-
-/* pciex clock support only reset function */
-static struct clk_ops tegra_pciex_clk_ops = {
- .reset = tegra30_periph_clk_reset,
-};
-
/* Output clock ops */
static DEFINE_SPINLOCK(clk_out_lock);
-static void tegra30_clk_out_init(struct clk *c)
+static int tegra30_clk_out_is_enabled(struct clk_hw *hw)
{
- const struct clk_mux_sel *mux = 0;
- const struct clk_mux_sel *sel;
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = pmc_readl(c->reg);
c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
c->mul = 1;
c->div = 1;
-
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (((val & periph_clk_source_mask(c)) >>
- periph_clk_source_shift(c)) == sel->value)
- mux = sel;
- }
- BUG_ON(!mux);
- c->parent = mux->input;
+ return c->state;
}
-static int tegra30_clk_out_enable(struct clk *c)
+static int tegra30_clk_out_enable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
unsigned long flags;
- pr_debug("%s on clock %s\n", __func__, c->name);
-
spin_lock_irqsave(&clk_out_lock, flags);
val = pmc_readl(c->reg);
val |= (0x1 << c->u.periph.clk_num);
return 0;
}
-static void tegra30_clk_out_disable(struct clk *c)
+static void tegra30_clk_out_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
unsigned long flags;
- pr_debug("%s on clock %s\n", __func__, c->name);
-
spin_lock_irqsave(&clk_out_lock, flags);
val = pmc_readl(c->reg);
val &= ~(0x1 << c->u.periph.clk_num);
spin_unlock_irqrestore(&clk_out_lock, flags);
}
-static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p)
+static int tegra30_clk_out_set_parent(struct clk_hw *hw, u8 index)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
unsigned long flags;
- const struct clk_mux_sel *sel;
-
- pr_debug("%s: %s %s\n", __func__, c->name, p->name);
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- if (c->refcnt)
- clk_enable(p);
+ spin_lock_irqsave(&clk_out_lock, flags);
+ val = pmc_readl(c->reg);
+ val &= ~periph_clk_source_mask(c);
+ val |= (index << periph_clk_source_shift(c));
+ pmc_writel(val, c->reg);
+ spin_unlock_irqrestore(&clk_out_lock, flags);
- spin_lock_irqsave(&clk_out_lock, flags);
- val = pmc_readl(c->reg);
- val &= ~periph_clk_source_mask(c);
- val |= (sel->value << periph_clk_source_shift(c));
- pmc_writel(val, c->reg);
- spin_unlock_irqrestore(&clk_out_lock, flags);
+ return 0;
+}
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
+static u8 tegra30_clk_out_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = pmc_readl(c->reg);
+ int source;
- clk_reparent(c, p);
- return 0;
- }
- }
- return -EINVAL;
+ source = (val & periph_clk_source_mask(c)) >>
+ periph_clk_source_shift(c);
+ return source;
}
-static struct clk_ops tegra_clk_out_ops = {
- .init = &tegra30_clk_out_init,
- .enable = &tegra30_clk_out_enable,
- .disable = &tegra30_clk_out_disable,
- .set_parent = &tegra30_clk_out_set_parent,
+struct clk_ops tegra_clk_out_ops = {
+ .is_enabled = tegra30_clk_out_is_enabled,
+ .enable = tegra30_clk_out_enable,
+ .disable = tegra30_clk_out_disable,
+ .set_parent = tegra30_clk_out_set_parent,
+ .get_parent = tegra30_clk_out_get_parent,
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
};
-
/* Clock doubler ops */
-static void tegra30_clk_double_init(struct clk *c)
+static int tegra30_clk_double_is_enabled(struct clk_hw *hw)
{
- u32 val = clk_readl(c->reg);
- c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
- c->div = 1;
+ struct clk_tegra *c = to_clk_tegra(hw);
+
c->state = ON;
if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
c->state = OFF;
+ return c->state;
};
-static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_clk_double_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
- unsigned long parent_rate = clk_get_rate(c->parent);
+
if (rate == parent_rate) {
val = clk_readl(c->reg) | (0x1 << c->reg_shift);
clk_writel(val, c->reg);
return -EINVAL;
}
-static struct clk_ops tegra_clk_double_ops = {
- .init = &tegra30_clk_double_init,
- .enable = &tegra30_periph_clk_enable,
- .disable = &tegra30_periph_clk_disable,
- .set_rate = &tegra30_clk_double_set_rate,
-};
+static unsigned long tegra30_clk_double_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u64 rate = parent_rate;
-/* Audio sync clock ops */
-static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate)
+ u32 val = clk_readl(c->reg);
+ c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
+ c->div = 1;
+
+ if (c->mul != 0 && c->div != 0) {
+ rate *= c->mul;
+ rate += c->div - 1; /* round up */
+ do_div(rate, c->div);
+ }
+
+ return rate;
+}
+
+static long tegra30_clk_double_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
{
- c->rate = rate;
- return 0;
+ unsigned long output_rate = *prate;
+
+ do_div(output_rate, 2);
+ return output_rate;
}
-static struct clk_ops tegra_sync_source_ops = {
- .set_rate = &tegra30_sync_source_set_rate,
+struct clk_ops tegra30_clk_double_ops = {
+ .is_enabled = tegra30_clk_double_is_enabled,
+ .enable = tegra30_periph_clk_enable,
+ .disable = tegra30_periph_clk_disable,
+ .recalc_rate = tegra30_clk_double_recalc_rate,
+ .round_rate = tegra30_clk_double_round_rate,
+ .set_rate = tegra30_clk_double_set_rate,
+};
+
+/* Audio sync clock ops */
+struct clk_ops tegra_sync_source_ops = {
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
};
-static void tegra30_audio_sync_clk_init(struct clk *c)
+static int tegra30_audio_sync_clk_is_enabled(struct clk_hw *hw)
{
- int source;
- const struct clk_mux_sel *sel;
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = clk_readl(c->reg);
c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
- source = val & AUDIO_SYNC_SOURCE_MASK;
- for (sel = c->inputs; sel->input != NULL; sel++)
- if (sel->value == source)
- break;
- BUG_ON(sel->input == NULL);
- c->parent = sel->input;
+ return c->state;
}
-static int tegra30_audio_sync_clk_enable(struct clk *c)
+static int tegra30_audio_sync_clk_enable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = clk_readl(c->reg);
clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
return 0;
}
-static void tegra30_audio_sync_clk_disable(struct clk *c)
+static void tegra30_audio_sync_clk_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = clk_readl(c->reg);
clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
}
-static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val;
- const struct clk_mux_sel *sel;
- for (sel = c->inputs; sel->input != NULL; sel++) {
- if (sel->input == p) {
- val = clk_readl(c->reg);
- val &= ~AUDIO_SYNC_SOURCE_MASK;
- val |= sel->value;
- if (c->refcnt)
- clk_enable(p);
-
- clk_writel(val, c->reg);
+ val = clk_readl(c->reg);
+ val &= ~AUDIO_SYNC_SOURCE_MASK;
+ val |= index;
- if (c->refcnt && c->parent)
- clk_disable(c->parent);
+ clk_writel(val, c->reg);
+ return 0;
+}
- clk_reparent(c, p);
- return 0;
- }
- }
+static u8 tegra30_audio_sync_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_tegra *c = to_clk_tegra(hw);
+ u32 val = clk_readl(c->reg);
+ int source;
- return -EINVAL;
+ source = val & AUDIO_SYNC_SOURCE_MASK;
+ return source;
}
-static struct clk_ops tegra_audio_sync_clk_ops = {
- .init = tegra30_audio_sync_clk_init,
- .enable = tegra30_audio_sync_clk_enable,
- .disable = tegra30_audio_sync_clk_disable,
+struct clk_ops tegra30_audio_sync_clk_ops = {
+ .is_enabled = tegra30_audio_sync_clk_is_enabled,
+ .enable = tegra30_audio_sync_clk_enable,
+ .disable = tegra30_audio_sync_clk_disable,
.set_parent = tegra30_audio_sync_clk_set_parent,
+ .get_parent = tegra30_audio_sync_clk_get_parent,
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
};
/* cml0 (pcie), and cml1 (sata) clock ops */
-static void tegra30_cml_clk_init(struct clk *c)
+static int tegra30_cml_clk_is_enabled(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
u32 val = clk_readl(c->reg);
c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
+ return c->state;
}
-static int tegra30_cml_clk_enable(struct clk *c)
+static int tegra30_cml_clk_enable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
u32 val = clk_readl(c->reg);
val |= (0x1 << c->u.periph.clk_num);
clk_writel(val, c->reg);
+
return 0;
}
-static void tegra30_cml_clk_disable(struct clk *c)
+static void tegra30_cml_clk_disable(struct clk_hw *hw)
{
+ struct clk_tegra *c = to_clk_tegra(hw);
+
u32 val = clk_readl(c->reg);
val &= ~(0x1 << c->u.periph.clk_num);
clk_writel(val, c->reg);
}
-static struct clk_ops tegra_cml_clk_ops = {
- .init = &tegra30_cml_clk_init,
- .enable = &tegra30_cml_clk_enable,
- .disable = &tegra30_cml_clk_disable,
-};
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
- .name = "clk_32k",
- .rate = 32768,
- .ops = NULL,
- .max_rate = 32768,
-};
-
-static struct clk tegra_clk_m = {
- .name = "clk_m",
- .flags = ENABLE_ON_INIT,
- .ops = &tegra_clk_m_ops,
- .reg = 0x1fc,
- .reg_shift = 28,
- .max_rate = 48000000,
-};
-
-static struct clk tegra_clk_m_div2 = {
- .name = "clk_m_div2",
- .ops = &tegra_clk_m_div_ops,
- .parent = &tegra_clk_m,
- .mul = 1,
- .div = 2,
- .state = ON,
- .max_rate = 24000000,
-};
-
-static struct clk tegra_clk_m_div4 = {
- .name = "clk_m_div4",
- .ops = &tegra_clk_m_div_ops,
- .parent = &tegra_clk_m,
- .mul = 1,
- .div = 4,
- .state = ON,
- .max_rate = 12000000,
-};
-
-static struct clk tegra_pll_ref = {
- .name = "pll_ref",
- .flags = ENABLE_ON_INIT,
- .ops = &tegra_pll_ref_ops,
- .parent = &tegra_clk_m,
- .max_rate = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
- { 12000000, 1040000000, 520, 6, 1, 8},
- { 13000000, 1040000000, 480, 6, 1, 8},
- { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
- { 19200000, 1040000000, 325, 6, 1, 6},
- { 26000000, 1040000000, 520, 13, 1, 8},
-
- { 12000000, 832000000, 416, 6, 1, 8},
- { 13000000, 832000000, 832, 13, 1, 8},
- { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
- { 19200000, 832000000, 260, 6, 1, 8},
- { 26000000, 832000000, 416, 13, 1, 8},
-
- { 12000000, 624000000, 624, 12, 1, 8},
- { 13000000, 624000000, 624, 13, 1, 8},
- { 16800000, 600000000, 520, 14, 1, 8},
- { 19200000, 624000000, 520, 16, 1, 8},
- { 26000000, 624000000, 624, 26, 1, 8},
-
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
-
- { 12000000, 520000000, 520, 12, 1, 8},
- { 13000000, 520000000, 520, 13, 1, 8},
- { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
- { 19200000, 520000000, 325, 12, 1, 6},
- { 26000000, 520000000, 520, 26, 1, 8},
-
- { 12000000, 416000000, 416, 12, 1, 8},
- { 13000000, 416000000, 416, 13, 1, 8},
- { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
- { 19200000, 416000000, 260, 12, 1, 6},
- { 26000000, 416000000, 416, 26, 1, 8},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
- .name = "pll_c",
- .flags = PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0x80,
- .parent = &tegra_pll_ref,
- .max_rate = 1400000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_c_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_c_out1 = {
- .name = "pll_c_out1",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_c,
- .reg = 0x84,
- .reg_shift = 0,
- .max_rate = 700000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 16800000, 666000000, 555, 14, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
- .name = "pll_m",
- .flags = PLL_HAS_CPCON | PLLM,
- .ops = &tegra_pll_ops,
- .reg = 0x90,
- .parent = &tegra_pll_ref,
- .max_rate = 800000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1200000000,
- .freq_table = tegra_pll_m_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_m_out1 = {
- .name = "pll_m_out1",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_m,
- .reg = 0x94,
- .reg_shift = 0,
- .max_rate = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 16800000, 216000000, 360, 14, 2, 8},
- { 19200000, 216000000, 360, 16, 2, 8},
- { 26000000, 216000000, 432, 26, 2, 8},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
- .name = "pll_p",
- .flags = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0xa0,
- .parent = &tegra_pll_ref,
- .max_rate = 432000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_p_freq_table,
- .lock_delay = 300,
- .fixed_rate = 408000000,
- },
-};
-
-static struct clk tegra_pll_p_out1 = {
- .name = "pll_p_out1",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa4,
- .reg_shift = 0,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
- .name = "pll_p_out2",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa4,
- .reg_shift = 16,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
- .name = "pll_p_out3",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa8,
- .reg_shift = 0,
- .max_rate = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
- .name = "pll_p_out4",
- .ops = &tegra_pll_div_ops,
- .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
- .parent = &tegra_pll_p,
- .reg = 0xa8,
- .reg_shift = 16,
- .max_rate = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
- { 9600000, 564480000, 294, 5, 1, 4},
- { 9600000, 552960000, 288, 5, 1, 4},
- { 9600000, 24000000, 5, 2, 1, 1},
-
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
- .name = "pll_a",
- .flags = PLL_HAS_CPCON,
- .ops = &tegra_pll_ops,
- .reg = 0xb0,
- .parent = &tegra_pll_p_out1,
- .max_rate = 700000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1400000000,
- .freq_table = tegra_pll_a_freq_table,
- .lock_delay = 300,
- },
+struct clk_ops tegra_cml_clk_ops = {
+ .is_enabled = tegra30_cml_clk_is_enabled,
+ .enable = tegra30_cml_clk_enable,
+ .disable = tegra30_cml_clk_disable,
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
};
-static struct clk tegra_pll_a_out0 = {
- .name = "pll_a_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_U71,
- .parent = &tegra_pll_a,
- .reg = 0xb4,
- .reg_shift = 0,
- .max_rate = 100000000,
+struct clk_ops tegra_pciex_clk_ops = {
+ .recalc_rate = tegra30_clk_fixed_recalc_rate,
};
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 16800000, 216000000, 180, 14, 1, 4},
- { 19200000, 216000000, 180, 16, 1, 4},
- { 26000000, 216000000, 216, 26, 1, 4},
-
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 16800000, 594000000, 495, 14, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
-
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
-
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
- .name = "pll_d",
- .flags = PLL_HAS_CPCON | PLLD,
- .ops = &tegra_plld_ops,
- .reg = 0xd0,
- .parent = &tegra_pll_ref,
- .max_rate = 1000000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 40000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 40000000,
- .vco_max = 1000000000,
- .freq_table = tegra_pll_d_freq_table,
- .lock_delay = 1000,
- },
-};
-
-static struct clk tegra_pll_d_out0 = {
- .name = "pll_d_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_2 | PLLD,
- .parent = &tegra_pll_d,
- .max_rate = 500000000,
-};
-
-static struct clk tegra_pll_d2 = {
- .name = "pll_d2",
- .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD,
- .ops = &tegra_plld_ops,
- .reg = 0x4b8,
- .parent = &tegra_pll_ref,
- .max_rate = 1000000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 40000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 40000000,
- .vco_max = 1000000000,
- .freq_table = tegra_pll_d_freq_table,
- .lock_delay = 1000,
- },
-};
-
-static struct clk tegra_pll_d2_out0 = {
- .name = "pll_d2_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_2 | PLLD,
- .parent = &tegra_pll_d2,
- .max_rate = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 12},
- { 13000000, 480000000, 960, 13, 2, 12},
- { 16800000, 480000000, 400, 7, 2, 5},
- { 19200000, 480000000, 200, 4, 2, 3},
- { 26000000, 480000000, 960, 26, 2, 12},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
- .name = "pll_u",
- .flags = PLL_HAS_CPCON | PLLU,
- .ops = &tegra_pll_ops,
- .reg = 0xc0,
- .parent = &tegra_pll_ref,
- .max_rate = 480000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 40000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 480000000,
- .vco_max = 960000000,
- .freq_table = tegra_pll_u_freq_table,
- .lock_delay = 1000,
- },
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
- /* 1.7 GHz */
- { 12000000, 1700000000, 850, 6, 1, 8},
- { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
- { 26000000, 1700000000, 850, 13, 1, 8},
-
- /* 1.6 GHz */
- { 12000000, 1600000000, 800, 6, 1, 8},
- { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
- { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
- { 19200000, 1600000000, 500, 6, 1, 8},
- { 26000000, 1600000000, 800, 13, 1, 8},
-
- /* 1.5 GHz */
- { 12000000, 1500000000, 750, 6, 1, 8},
- { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
- { 16800000, 1500000000, 625, 7, 1, 8},
- { 19200000, 1500000000, 625, 8, 1, 8},
- { 26000000, 1500000000, 750, 13, 1, 8},
-
- /* 1.4 GHz */
- { 12000000, 1400000000, 700, 6, 1, 8},
- { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
- { 16800000, 1400000000, 1000, 12, 1, 8},
- { 19200000, 1400000000, 875, 12, 1, 8},
- { 26000000, 1400000000, 700, 13, 1, 8},
-
- /* 1.3 GHz */
- { 12000000, 1300000000, 975, 9, 1, 8},
- { 13000000, 1300000000, 1000, 10, 1, 8},
- { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 26000000, 1300000000, 650, 13, 1, 8},
-
- /* 1.2 GHz */
- { 12000000, 1200000000, 1000, 10, 1, 8},
- { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
- { 16800000, 1200000000, 1000, 14, 1, 8},
- { 19200000, 1200000000, 1000, 16, 1, 8},
- { 26000000, 1200000000, 600, 13, 1, 8},
-
- /* 1.1 GHz */
- { 12000000, 1100000000, 825, 9, 1, 8},
- { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
- { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
- { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
- { 26000000, 1100000000, 550, 13, 1, 8},
-
- /* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 8},
- { 13000000, 1000000000, 1000, 13, 1, 8},
- { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 8},
-
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
- .name = "pll_x",
- .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX,
- .ops = &tegra_pll_ops,
- .reg = 0xe0,
- .parent = &tegra_pll_ref,
- .max_rate = 1700000000,
- .u.pll = {
- .input_min = 2000000,
- .input_max = 31000000,
- .cf_min = 1000000,
- .cf_max = 6000000,
- .vco_min = 20000000,
- .vco_max = 1700000000,
- .freq_table = tegra_pll_x_freq_table,
- .lock_delay = 300,
- },
-};
-
-static struct clk tegra_pll_x_out0 = {
- .name = "pll_x_out0",
- .ops = &tegra_pll_div_ops,
- .flags = DIV_2 | PLLX,
- .parent = &tegra_pll_x,
- .max_rate = 850000000,
-};
-
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
- /* PLLE special case: use cpcon field to store cml divider value */
- { 12000000, 100000000, 150, 1, 18, 11},
- { 216000000, 100000000, 200, 18, 24, 13},
- { 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
- .name = "pll_e",
- .flags = PLL_ALT_MISC_REG,
- .ops = &tegra_plle_ops,
- .reg = 0xe8,
- .max_rate = 100000000,
- .u.pll = {
- .input_min = 12000000,
- .input_max = 216000000,
- .cf_min = 12000000,
- .cf_max = 12000000,
- .vco_min = 1200000000,
- .vco_max = 2400000000U,
- .freq_table = tegra_pll_e_freq_table,
- .lock_delay = 300,
- .fixed_rate = 100000000,
- },
-};
-
-static struct clk tegra_cml0_clk = {
- .name = "cml0",
- .parent = &tegra_pll_e,
- .ops = &tegra_cml_clk_ops,
- .reg = PLLE_AUX,
- .max_rate = 100000000,
- .u.periph = {
- .clk_num = 0,
- },
-};
-
-static struct clk tegra_cml1_clk = {
- .name = "cml1",
- .parent = &tegra_pll_e,
- .ops = &tegra_cml_clk_ops,
- .reg = PLLE_AUX,
- .max_rate = 100000000,
- .u.periph = {
- .clk_num = 1,
- },
-};
-
-static struct clk tegra_pciex_clk = {
- .name = "pciex",
- .parent = &tegra_pll_e,
- .ops = &tegra_pciex_clk_ops,
- .max_rate = 100000000,
- .u.periph = {
- .clk_num = 74,
- },
-};
-
-/* Audio sync clocks */
-#define SYNC_SOURCE(_id) \
- { \
- .name = #_id "_sync", \
- .rate = 24000000, \
- .max_rate = 24000000, \
- .ops = &tegra_sync_source_ops \
- }
-static struct clk tegra_sync_source_list[] = {
- SYNC_SOURCE(spdif_in),
- SYNC_SOURCE(i2s0),
- SYNC_SOURCE(i2s1),
- SYNC_SOURCE(i2s2),
- SYNC_SOURCE(i2s3),
- SYNC_SOURCE(i2s4),
- SYNC_SOURCE(vimclk),
-};
-
-static struct clk_mux_sel mux_audio_sync_clk[] = {
- { .input = &tegra_sync_source_list[0], .value = 0},
- { .input = &tegra_sync_source_list[1], .value = 1},
- { .input = &tegra_sync_source_list[2], .value = 2},
- { .input = &tegra_sync_source_list[3], .value = 3},
- { .input = &tegra_sync_source_list[4], .value = 4},
- { .input = &tegra_sync_source_list[5], .value = 5},
- { .input = &tegra_pll_a_out0, .value = 6},
- { .input = &tegra_sync_source_list[6], .value = 7},
- { 0, 0 }
-};
-
-#define AUDIO_SYNC_CLK(_id, _index) \
- { \
- .name = #_id, \
- .inputs = mux_audio_sync_clk, \
- .reg = 0x4A0 + (_index) * 4, \
- .max_rate = 24000000, \
- .ops = &tegra_audio_sync_clk_ops \
- }
-static struct clk tegra_clk_audio_list[] = {
- AUDIO_SYNC_CLK(audio0, 0),
- AUDIO_SYNC_CLK(audio1, 1),
- AUDIO_SYNC_CLK(audio2, 2),
- AUDIO_SYNC_CLK(audio3, 3),
- AUDIO_SYNC_CLK(audio4, 4),
- AUDIO_SYNC_CLK(audio, 5), /* SPDIF */
-};
-
-#define AUDIO_SYNC_2X_CLK(_id, _index) \
- { \
- .name = #_id "_2x", \
- .flags = PERIPH_NO_RESET, \
- .max_rate = 48000000, \
- .ops = &tegra_clk_double_ops, \
- .reg = 0x49C, \
- .reg_shift = 24 + (_index), \
- .parent = &tegra_clk_audio_list[(_index)], \
- .u.periph = { \
- .clk_num = 113 + (_index), \
- }, \
- }
-static struct clk tegra_clk_audio_2x_list[] = {
- AUDIO_SYNC_2X_CLK(audio0, 0),
- AUDIO_SYNC_2X_CLK(audio1, 1),
- AUDIO_SYNC_2X_CLK(audio2, 2),
- AUDIO_SYNC_2X_CLK(audio3, 3),
- AUDIO_SYNC_2X_CLK(audio4, 4),
- AUDIO_SYNC_2X_CLK(audio, 5), /* SPDIF */
-};
+/* Tegra30 CPU clock and reset control functions */
+static void tegra30_wait_cpu_in_reset(u32 cpu)
+{
+ unsigned int reg;
-#define MUX_I2S_SPDIF(_id, _index) \
-static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = { \
- {.input = &tegra_pll_a_out0, .value = 0}, \
- {.input = &tegra_clk_audio_2x_list[(_index)], .value = 1}, \
- {.input = &tegra_pll_p, .value = 2}, \
- {.input = &tegra_clk_m, .value = 3}, \
- { 0, 0}, \
-}
-MUX_I2S_SPDIF(audio0, 0);
-MUX_I2S_SPDIF(audio1, 1);
-MUX_I2S_SPDIF(audio2, 2);
-MUX_I2S_SPDIF(audio3, 3);
-MUX_I2S_SPDIF(audio4, 4);
-MUX_I2S_SPDIF(audio, 5); /* SPDIF */
-
-/* External clock outputs (through PMC) */
-#define MUX_EXTERN_OUT(_id) \
-static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = { \
- {.input = &tegra_clk_m, .value = 0}, \
- {.input = &tegra_clk_m_div2, .value = 1}, \
- {.input = &tegra_clk_m_div4, .value = 2}, \
- {.input = NULL, .value = 3}, /* placeholder */ \
- { 0, 0}, \
-}
-MUX_EXTERN_OUT(1);
-MUX_EXTERN_OUT(2);
-MUX_EXTERN_OUT(3);
-
-static struct clk_mux_sel *mux_extern_out_list[] = {
- mux_clkm_clkm2_clkm4_extern1,
- mux_clkm_clkm2_clkm4_extern2,
- mux_clkm_clkm2_clkm4_extern3,
-};
+ do {
+ reg = readl(reg_clk_base +
+ TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+ cpu_relax();
+ } while (!(reg & (1 << cpu))); /* check CPU been reset or not */
-#define CLK_OUT_CLK(_id) \
- { \
- .name = "clk_out_" #_id, \
- .lookup = { \
- .dev_id = "clk_out_" #_id, \
- .con_id = "extern" #_id, \
- }, \
- .ops = &tegra_clk_out_ops, \
- .reg = 0x1a8, \
- .inputs = mux_clkm_clkm2_clkm4_extern##_id, \
- .flags = MUX_CLK_OUT, \
- .max_rate = 216000000, \
- .u.periph = { \
- .clk_num = (_id - 1) * 8 + 2, \
- }, \
- }
-static struct clk tegra_clk_out_list[] = {
- CLK_OUT_CLK(1),
- CLK_OUT_CLK(2),
- CLK_OUT_CLK(3),
-};
+ return;
+}
-/* called after peripheral external clocks are initialized */
-static void init_clk_out_mux(void)
+static void tegra30_put_cpu_in_reset(u32 cpu)
{
- int i;
- struct clk *c;
-
- /* output clock con_id is the name of peripheral
- external clock connected to input 3 of the output mux */
- for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) {
- c = tegra_get_clock_by_name(
- tegra_clk_out_list[i].lookup.con_id);
- if (!c)
- pr_err("%s: could not find clk %s\n", __func__,
- tegra_clk_out_list[i].lookup.con_id);
- mux_extern_out_list[i][3].input = c;
- }
+ writel(CPU_RESET(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ dmb();
}
-/* Peripheral muxes */
-static struct clk_mux_sel mux_sclk[] = {
- { .input = &tegra_clk_m, .value = 0},
- { .input = &tegra_pll_c_out1, .value = 1},
- { .input = &tegra_pll_p_out4, .value = 2},
- { .input = &tegra_pll_p_out3, .value = 3},
- { .input = &tegra_pll_p_out2, .value = 4},
- /* { .input = &tegra_clk_d, .value = 5}, - no use on tegra30 */
- { .input = &tegra_clk_32k, .value = 6},
- { .input = &tegra_pll_m_out1, .value = 7},
- { 0, 0},
-};
-
-static struct clk tegra_clk_sclk = {
- .name = "sclk",
- .inputs = mux_sclk,
- .reg = 0x28,
- .ops = &tegra_super_ops,
- .max_rate = 334000000,
- .min_rate = 40000000,
-};
-
-static struct clk tegra_clk_blink = {
- .name = "blink",
- .parent = &tegra_clk_32k,
- .reg = 0x40,
- .ops = &tegra_blink_clk_ops,
- .max_rate = 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
- { .input = &tegra_pll_m, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_pll_p, .value = 2},
- { .input = &tegra_pll_a_out0, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
- { .input = &tegra_pll_p, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_pll_m, .value = 2},
- { .input = &tegra_clk_m, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_clkm[] = {
- { .input = &tegra_pll_p, .value = 0},
- { .input = &tegra_clk_m, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_d_out0, .value = 1},
- {.input = &tegra_pll_c, .value = 2},
- {.input = &tegra_clk_m, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_m, .value = 1},
- {.input = &tegra_pll_d_out0, .value = 2},
- {.input = &tegra_pll_a_out0, .value = 3},
- {.input = &tegra_pll_c, .value = 4},
- {.input = &tegra_pll_d2_out0, .value = 5},
- {.input = &tegra_clk_m, .value = 6},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = {
- { .input = &tegra_pll_a_out0, .value = 0},
- /* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */
- { .input = &tegra_pll_p, .value = 2},
- { .input = &tegra_clk_m, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_c, .value = 1},
- {.input = &tegra_clk_32k, .value = 2},
- {.input = &tegra_clk_m, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_c, .value = 1},
- {.input = &tegra_clk_m, .value = 2},
- {.input = &tegra_clk_32k, .value = 3},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
- {.input = &tegra_pll_p, .value = 0},
- {.input = &tegra_pll_c, .value = 1},
- {.input = &tegra_pll_m, .value = 2},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
- { .input = &tegra_clk_m, .value = 0},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
- { .input = &tegra_pll_p_out3, .value = 0},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0[] = {
- { .input = &tegra_pll_d_out0, .value = 0},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0_plld2_out0[] = {
- { .input = &tegra_pll_d_out0, .value = 0},
- { .input = &tegra_pll_d2_out0, .value = 1},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
- { .input = &tegra_clk_32k, .value = 0},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = {
- { .input = &tegra_pll_a_out0, .value = 0},
- { .input = &tegra_clk_32k, .value = 1},
- { .input = &tegra_pll_p, .value = 2},
- { .input = &tegra_clk_m, .value = 3},
- { .input = &tegra_pll_e, .value = 4},
- { 0, 0},
-};
-
-static struct clk_mux_sel mux_cclk_g[] = {
- { .input = &tegra_clk_m, .value = 0},
- { .input = &tegra_pll_c, .value = 1},
- { .input = &tegra_clk_32k, .value = 2},
- { .input = &tegra_pll_m, .value = 3},
- { .input = &tegra_pll_p, .value = 4},
- { .input = &tegra_pll_p_out4, .value = 5},
- { .input = &tegra_pll_p_out3, .value = 6},
- { .input = &tegra_pll_x, .value = 8},
- { 0, 0},
-};
-
-static struct clk tegra_clk_cclk_g = {
- .name = "cclk_g",
- .flags = DIV_U71 | DIV_U71_INT,
- .inputs = mux_cclk_g,
- .reg = 0x368,
- .ops = &tegra_super_ops,
- .max_rate = 1700000000,
-};
-
-static struct clk tegra30_clk_twd = {
- .parent = &tegra_clk_cclk_g,
- .name = "twd",
- .ops = &tegra30_twd_ops,
- .max_rate = 1400000000, /* Same as tegra_clk_cpu_cmplx.max_rate */
- .mul = 1,
- .div = 2,
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- .ops = &tegra_periph_clk_ops, \
- .reg = _reg, \
- .inputs = _inputs, \
- .flags = _flags, \
- .max_rate = _max, \
- .u.periph = { \
- .clk_num = _clk_num, \
- }, \
- }
-
-#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs, \
- _flags, _ops) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- .ops = _ops, \
- .reg = _reg, \
- .inputs = _inputs, \
- .flags = _flags, \
- .max_rate = _max, \
- .u.periph = { \
- .clk_num = _clk_num, \
- }, \
- }
-
-#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- .ops = &tegra_clk_shared_bus_ops, \
- .parent = _parent, \
- .u.shared_bus_user = { \
- .client_id = _id, \
- .client_div = _div, \
- .mode = _mode, \
- }, \
- }
-struct clk tegra_list_clks[] = {
- PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 26000000, mux_clk_m, 0),
- PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
- PERIPH_CLK("kbc", "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
- PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
- PERIPH_CLK("kfuse", "kfuse-tegra", NULL, 40, 0, 26000000, mux_clk_m, 0),
- PERIPH_CLK("fuse", "fuse-tegra", "fuse", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB),
- PERIPH_CLK("fuse_burn", "fuse-tegra", "fuse_burn", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB),
- PERIPH_CLK("apbif", "tegra30-ahub", "apbif", 107, 0, 26000000, mux_clk_m, 0),
- PERIPH_CLK("i2s0", "tegra30-i2s.0", NULL, 30, 0x1d8, 26000000, mux_pllaout0_audio0_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("i2s1", "tegra30-i2s.1", NULL, 11, 0x100, 26000000, mux_pllaout0_audio1_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("i2s2", "tegra30-i2s.2", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("i2s3", "tegra30-i2s.3", NULL, 101, 0x3bc, 26000000, mux_pllaout0_audio3_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("i2s4", "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("spdif_out", "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("spdif_in", "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("d_audio", "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("dam0", "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("dam1", "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("dam2", "tegra30-dam.2", NULL, 110, 0x3e0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
- PERIPH_CLK("hda", "tegra30-hda", "hda", 125, 0x428, 108000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("hda2codec_2x", "tegra30-hda", "hda2codec", 111, 0x3e4, 48000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("hda2hdmi", "tegra30-hda", "hda2hdmi", 128, 0, 48000000, mux_clk_m, 0),
- PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sbc5", "spi_tegra.4", NULL, 104, 0x3c8, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sbc6", "spi_tegra.5", NULL, 105, 0x3cc, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sata_oob", "tegra_sata_oob", NULL, 123, 0x420, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sata", "tegra_sata", NULL, 124, 0x424, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("sata_cold", "tegra_sata_cold", NULL, 129, 0, 48000000, mux_clk_m, 0),
- PERIPH_CLK_EX("ndflash", "tegra_nand", NULL, 13, 0x160, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71, &tegra_nand_clk_ops),
- PERIPH_CLK("ndspeed", "tegra_nand_speed", NULL, 80, 0x3f8, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
- PERIPH_CLK("vcp", "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("bsea", "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("bsev", "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT),
- PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */
- PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
- PERIPH_CLK("owr", "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */
- PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("i2c4", "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("i2c5", "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK_EX("vi", "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT, &tegra_vi_clk_ops),
- PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
- PERIPH_CLK("3d2", "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
- PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE),
- PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET),
- PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
- PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
- PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 260000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
- PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK_EX("dtv", "dtv", NULL, 79, 0x1dc, 250000000, mux_clk_m, 0, &tegra_dtv_clk_ops),
- PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8 | DIV_U71),
- PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 220000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8),
- PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8),
- PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
- PERIPH_CLK("dsia", "tegradc.0", "dsia", 48, 0, 500000000, mux_plld_out0, 0),
- PERIPH_CLK_EX("dsib", "tegradc.1", "dsib", 82, 0xd0, 500000000, mux_plld_out0_plld2_out0, MUX | PLLD, &tegra_dsib_clk_ops),
- PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 102000000, mux_pllp_out3, 0),
- PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */
- PERIPH_CLK("csus", "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET),
-
- PERIPH_CLK("tsensor", "tegra-tsensor", NULL, 100, 0x3b8, 216000000, mux_pllp_pllc_clkm_clk32, MUX | DIV_U71),
- PERIPH_CLK("actmon", "actmon", NULL, 119, 0x3e8, 216000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71),
- PERIPH_CLK("extern1", "extern1", NULL, 120, 0x3ec, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
- PERIPH_CLK("extern2", "extern2", NULL, 121, 0x3f0, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
- PERIPH_CLK("extern3", "extern3", NULL, 122, 0x3f4, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
- PERIPH_CLK("i2cslow", "i2cslow", NULL, 81, 0x3fc, 26000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("pcie", "tegra-pcie", "pcie", 70, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("afi", "tegra-pcie", "afi", 72, 0, 250000000, mux_clk_m, 0),
- PERIPH_CLK("se", "se", NULL, 127, 0x42c, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con) \
- { \
- .name = _name, \
- .lookup = { \
- .dev_id = _dev, \
- .con_id = _con, \
- }, \
- }
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration. List those here to register them twice in the clock lookup
- * table under two names.
- */
-struct clk_duplicate tegra_clk_duplicates[] = {
- CLK_DUPLICATE("uarta", "serial8250.0", NULL),
- CLK_DUPLICATE("uartb", "serial8250.1", NULL),
- CLK_DUPLICATE("uartc", "serial8250.2", NULL),
- CLK_DUPLICATE("uartd", "serial8250.3", NULL),
- CLK_DUPLICATE("uarte", "serial8250.4", NULL),
- CLK_DUPLICATE("usbd", "utmip-pad", NULL),
- CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
- CLK_DUPLICATE("usbd", "tegra-otg", NULL),
- CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
- CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
- CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
- CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
- CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
- CLK_DUPLICATE("bsev", "nvavp", "bsev"),
- CLK_DUPLICATE("vde", "tegra-aes", "vde"),
- CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
- CLK_DUPLICATE("bsea", "nvavp", "bsea"),
- CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
- CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
- CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
- CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
- CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
- CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
- CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
- CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
- CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
- CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
- CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
- CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
- CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
- CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
- CLK_DUPLICATE("twd", "smp_twd", NULL),
- CLK_DUPLICATE("vcp", "nvavp", "vcp"),
- CLK_DUPLICATE("i2s0", NULL, "i2s0"),
- CLK_DUPLICATE("i2s1", NULL, "i2s1"),
- CLK_DUPLICATE("i2s2", NULL, "i2s2"),
- CLK_DUPLICATE("i2s3", NULL, "i2s3"),
- CLK_DUPLICATE("i2s4", NULL, "i2s4"),
- CLK_DUPLICATE("dam0", NULL, "dam0"),
- CLK_DUPLICATE("dam1", NULL, "dam1"),
- CLK_DUPLICATE("dam2", NULL, "dam2"),
- CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
-};
-
-struct clk *tegra_ptr_clks[] = {
- &tegra_clk_32k,
- &tegra_clk_m,
- &tegra_clk_m_div2,
- &tegra_clk_m_div4,
- &tegra_pll_ref,
- &tegra_pll_m,
- &tegra_pll_m_out1,
- &tegra_pll_c,
- &tegra_pll_c_out1,
- &tegra_pll_p,
- &tegra_pll_p_out1,
- &tegra_pll_p_out2,
- &tegra_pll_p_out3,
- &tegra_pll_p_out4,
- &tegra_pll_a,
- &tegra_pll_a_out0,
- &tegra_pll_d,
- &tegra_pll_d_out0,
- &tegra_pll_d2,
- &tegra_pll_d2_out0,
- &tegra_pll_u,
- &tegra_pll_x,
- &tegra_pll_x_out0,
- &tegra_pll_e,
- &tegra_clk_cclk_g,
- &tegra_cml0_clk,
- &tegra_cml1_clk,
- &tegra_pciex_clk,
- &tegra_clk_sclk,
- &tegra_clk_blink,
- &tegra30_clk_twd,
-};
-
-
-static void tegra30_init_one_clock(struct clk *c)
+static void tegra30_cpu_out_of_reset(u32 cpu)
{
- clk_init(c);
- INIT_LIST_HEAD(&c->shared_bus_list);
- if (!c->lookup.dev_id && !c->lookup.con_id)
- c->lookup.con_id = c->name;
- c->lookup.clk = c;
- clkdev_add(&c->lookup);
+ writel(CPU_RESET(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+ wmb();
}
-void __init tegra30_init_clocks(void)
+static void tegra30_enable_cpu_clock(u32 cpu)
{
- int i;
- struct clk *c;
+ unsigned int reg;
- for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
- tegra30_init_one_clock(tegra_ptr_clks[i]);
-
- for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
- tegra30_init_one_clock(&tegra_list_clks[i]);
+ writel(CPU_CLOCK(cpu),
+ reg_clk_base + TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+ reg = readl(reg_clk_base +
+ TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+}
- for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
- c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
- if (!c) {
- pr_err("%s: Unknown duplicate clock %s\n", __func__,
- tegra_clk_duplicates[i].name);
- continue;
- }
+static void tegra30_disable_cpu_clock(u32 cpu)
+{
- tegra_clk_duplicates[i].lookup.clk = c;
- clkdev_add(&tegra_clk_duplicates[i].lookup);
- }
+ unsigned int reg;
- for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
- tegra30_init_one_clock(&tegra_sync_source_list[i]);
- for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
- tegra30_init_one_clock(&tegra_clk_audio_list[i]);
- for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
- tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]);
+ reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg | CPU_CLOCK(cpu),
+ reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
- init_clk_out_mux();
- for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
- tegra30_init_one_clock(&tegra_clk_out_list[i]);
+static struct tegra_cpu_car_ops tegra30_cpu_car_ops = {
+ .wait_for_reset = tegra30_wait_cpu_in_reset,
+ .put_in_reset = tegra30_put_cpu_in_reset,
+ .out_of_reset = tegra30_cpu_out_of_reset,
+ .enable_clock = tegra30_enable_cpu_clock,
+ .disable_clock = tegra30_disable_cpu_clock,
+};
+void __init tegra30_cpu_car_ops_init(void)
+{
+ tegra_cpu_car_ops = &tegra30_cpu_car_ops;
}
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA30_CLOCK_H
+#define __MACH_TEGRA30_CLOCK_H
+
+extern struct clk_ops tegra30_clk_32k_ops;
+extern struct clk_ops tegra30_clk_m_ops;
+extern struct clk_ops tegra_clk_m_div_ops;
+extern struct clk_ops tegra_pll_ref_ops;
+extern struct clk_ops tegra30_pll_ops;
+extern struct clk_ops tegra30_pll_div_ops;
+extern struct clk_ops tegra_plld_ops;
+extern struct clk_ops tegra30_plle_ops;
+extern struct clk_ops tegra_cml_clk_ops;
+extern struct clk_ops tegra_pciex_clk_ops;
+extern struct clk_ops tegra_sync_source_ops;
+extern struct clk_ops tegra30_audio_sync_clk_ops;
+extern struct clk_ops tegra30_clk_double_ops;
+extern struct clk_ops tegra_clk_out_ops;
+extern struct clk_ops tegra30_super_ops;
+extern struct clk_ops tegra30_blink_clk_ops;
+extern struct clk_ops tegra30_twd_ops;
+extern struct clk_ops tegra30_periph_clk_ops;
+extern struct clk_ops tegra30_dsib_clk_ops;
+extern struct clk_ops tegra_nand_clk_ops;
+extern struct clk_ops tegra_vi_clk_ops;
+extern struct clk_ops tegra_dtv_clk_ops;
+extern struct clk_ops tegra_clk_shared_bus_ops;
+
+int tegra30_plld_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting);
+void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert);
+int tegra30_vi_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting);
+int tegra30_nand_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting);
+int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw,
+ enum tegra_clk_ex_param p, u32 setting);
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-tegra/tegra30_clocks.c
+ *
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/clk-private.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra30_clocks.h"
+#include "tegra_cpu_car.h"
+
+#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags, \
+ _parent_names, _parents, _parent) \
+ static struct clk tegra_##_name = { \
+ .hw = &tegra_##_name##_hw.hw, \
+ .name = #_name, \
+ .rate = _rate, \
+ .ops = _ops, \
+ .flags = _flags, \
+ .parent_names = _parent_names, \
+ .parents = _parents, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .parent = _parent, \
+ };
+
+static struct clk tegra_clk_32k;
+static struct clk_tegra tegra_clk_32k_hw = {
+ .hw = {
+ .clk = &tegra_clk_32k,
+ },
+ .fixed_rate = 32768,
+};
+static struct clk tegra_clk_32k = {
+ .name = "clk_32k",
+ .hw = &tegra_clk_32k_hw.hw,
+ .ops = &tegra30_clk_32k_ops,
+ .flags = CLK_IS_ROOT,
+};
+
+static struct clk tegra_clk_m;
+static struct clk_tegra tegra_clk_m_hw = {
+ .hw = {
+ .clk = &tegra_clk_m,
+ },
+ .flags = ENABLE_ON_INIT,
+ .reg = 0x1fc,
+ .reg_shift = 28,
+ .max_rate = 48000000,
+};
+static struct clk tegra_clk_m = {
+ .name = "clk_m",
+ .hw = &tegra_clk_m_hw.hw,
+ .ops = &tegra30_clk_m_ops,
+ .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
+};
+
+static const char *clk_m_div_parent_names[] = {
+ "clk_m",
+};
+
+static struct clk *clk_m_div_parents[] = {
+ &tegra_clk_m,
+};
+
+static struct clk tegra_clk_m_div2;
+static struct clk_tegra tegra_clk_m_div2_hw = {
+ .hw = {
+ .clk = &tegra_clk_m_div2,
+ },
+ .mul = 1,
+ .div = 2,
+ .max_rate = 24000000,
+};
+DEFINE_CLK_TEGRA(clk_m_div2, 0, &tegra_clk_m_div_ops, 0,
+ clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m);
+
+static struct clk tegra_clk_m_div4;
+static struct clk_tegra tegra_clk_m_div4_hw = {
+ .hw = {
+ .clk = &tegra_clk_m_div4,
+ },
+ .mul = 1,
+ .div = 4,
+ .max_rate = 12000000,
+};
+DEFINE_CLK_TEGRA(clk_m_div4, 0, &tegra_clk_m_div_ops, 0,
+ clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m);
+
+static struct clk tegra_pll_ref;
+static struct clk_tegra tegra_pll_ref_hw = {
+ .hw = {
+ .clk = &tegra_pll_ref,
+ },
+ .flags = ENABLE_ON_INIT,
+ .max_rate = 26000000,
+};
+DEFINE_CLK_TEGRA(pll_ref, 0, &tegra_pll_ref_ops, 0, clk_m_div_parent_names,
+ clk_m_div_parents, &tegra_clk_m);
+
+#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min, \
+ _input_max, _cf_min, _cf_max, _vco_min, \
+ _vco_max, _freq_table, _lock_delay, _ops, \
+ _fixed_rate, _clk_cfg_ex, _parent) \
+ static struct clk tegra_##_name; \
+ static const char *_name##_parent_names[] = { \
+ #_parent, \
+ }; \
+ static struct clk *_name##_parents[] = { \
+ &tegra_##_parent, \
+ }; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .flags = _flags, \
+ .reg = _reg, \
+ .max_rate = _max_rate, \
+ .u.pll = { \
+ .input_min = _input_min, \
+ .input_max = _input_max, \
+ .cf_min = _cf_min, \
+ .cf_max = _cf_max, \
+ .vco_min = _vco_min, \
+ .vco_max = _vco_max, \
+ .freq_table = _freq_table, \
+ .lock_delay = _lock_delay, \
+ .fixed_rate = _fixed_rate, \
+ }, \
+ .clk_cfg_ex = _clk_cfg_ex, \
+ }; \
+ DEFINE_CLK_TEGRA(_name, 0, &_ops, CLK_IGNORE_UNUSED, \
+ _name##_parent_names, _name##_parents, \
+ &tegra_##_parent);
+
+#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift, \
+ _max_rate, _ops, _parent, _clk_flags) \
+ static const char *_name##_parent_names[] = { \
+ #_parent, \
+ }; \
+ static struct clk *_name##_parents[] = { \
+ &tegra_##_parent, \
+ }; \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .flags = _flags, \
+ .reg = _reg, \
+ .max_rate = _max_rate, \
+ .reg_shift = _reg_shift, \
+ }; \
+ DEFINE_CLK_TEGRA(_name, 0, &tegra30_pll_div_ops, \
+ _clk_flags, _name##_parent_names, \
+ _name##_parents, &tegra_##_parent);
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+ { 12000000, 1040000000, 520, 6, 1, 8},
+ { 13000000, 1040000000, 480, 6, 1, 8},
+ { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
+ { 19200000, 1040000000, 325, 6, 1, 6},
+ { 26000000, 1040000000, 520, 13, 1, 8},
+
+ { 12000000, 832000000, 416, 6, 1, 8},
+ { 13000000, 832000000, 832, 13, 1, 8},
+ { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
+ { 19200000, 832000000, 260, 6, 1, 8},
+ { 26000000, 832000000, 416, 13, 1, 8},
+
+ { 12000000, 624000000, 624, 12, 1, 8},
+ { 13000000, 624000000, 624, 13, 1, 8},
+ { 16800000, 600000000, 520, 14, 1, 8},
+ { 19200000, 624000000, 520, 16, 1, 8},
+ { 26000000, 624000000, 624, 26, 1, 8},
+
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+
+ { 12000000, 520000000, 520, 12, 1, 8},
+ { 13000000, 520000000, 520, 13, 1, 8},
+ { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
+ { 19200000, 520000000, 325, 12, 1, 6},
+ { 26000000, 520000000, 520, 26, 1, 8},
+
+ { 12000000, 416000000, 416, 12, 1, 8},
+ { 13000000, 416000000, 416, 13, 1, 8},
+ { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
+ { 19200000, 416000000, 260, 12, 1, 6},
+ { 26000000, 416000000, 416, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 1400000000, 2000000, 31000000, 1000000,
+ 6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300,
+ tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 700000000,
+ tegra30_pll_div_ops, pll_c, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+ { 12000000, 666000000, 666, 12, 1, 8},
+ { 13000000, 666000000, 666, 13, 1, 8},
+ { 16800000, 666000000, 555, 14, 1, 8},
+ { 19200000, 666000000, 555, 16, 1, 8},
+ { 26000000, 666000000, 666, 26, 1, 8},
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_m, PLL_HAS_CPCON | PLLM, 0x90, 800000000, 2000000, 31000000,
+ 1000000, 6000000, 20000000, 1200000000, tegra_pll_m_freq_table,
+ 300, tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000,
+ tegra30_pll_div_ops, pll_m, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+ { 12000000, 216000000, 432, 12, 2, 8},
+ { 13000000, 216000000, 432, 13, 2, 8},
+ { 16800000, 216000000, 360, 14, 2, 8},
+ { 19200000, 216000000, 360, 16, 2, 8},
+ { 26000000, 216000000, 432, 26, 2, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000,
+ 2000000, 31000000, 1000000, 6000000, 20000000, 1400000000,
+ tegra_pll_p_freq_table, 300, tegra30_pll_ops, 408000000, NULL,
+ pll_ref);
+
+DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4,
+ 0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4,
+ 16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8,
+ 0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8,
+ 16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+ { 9600000, 564480000, 294, 5, 1, 4},
+ { 9600000, 552960000, 288, 5, 1, 4},
+ { 9600000, 24000000, 5, 2, 1, 1},
+
+ { 28800000, 56448000, 49, 25, 1, 1},
+ { 28800000, 73728000, 64, 25, 1, 1},
+ { 28800000, 24000000, 5, 6, 1, 1},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 700000000, 2000000, 31000000, 1000000,
+ 6000000, 20000000, 1400000000, tegra_pll_a_freq_table,
+ 300, tegra30_pll_ops, 0, NULL, pll_p_out1);
+
+DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 100000000, tegra30_pll_div_ops,
+ pll_a, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+ { 12000000, 216000000, 216, 12, 1, 4},
+ { 13000000, 216000000, 216, 13, 1, 4},
+ { 16800000, 216000000, 180, 14, 1, 4},
+ { 19200000, 216000000, 180, 16, 1, 4},
+ { 26000000, 216000000, 216, 26, 1, 4},
+
+ { 12000000, 594000000, 594, 12, 1, 8},
+ { 13000000, 594000000, 594, 13, 1, 8},
+ { 16800000, 594000000, 495, 14, 1, 8},
+ { 19200000, 594000000, 495, 16, 1, 8},
+ { 26000000, 594000000, 594, 26, 1, 8},
+
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000,
+ 1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table,
+ 1000, tegra30_pll_ops, 0, tegra30_plld_clk_cfg_ex, pll_ref);
+
+DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops,
+ pll_d, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+DEFINE_PLL(pll_d2, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD, 0x4b8, 1000000000,
+ 2000000, 40000000, 1000000, 6000000, 40000000, 1000000000,
+ tegra_pll_d_freq_table, 1000, tegra30_pll_ops, 0, NULL,
+ pll_ref);
+
+DEFINE_PLL_OUT(pll_d2_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops,
+ pll_d2, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+ { 12000000, 480000000, 960, 12, 2, 12},
+ { 13000000, 480000000, 960, 13, 2, 12},
+ { 16800000, 480000000, 400, 7, 2, 5},
+ { 19200000, 480000000, 200, 4, 2, 3},
+ { 26000000, 480000000, 960, 26, 2, 12},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_u, PLL_HAS_CPCON | PLLU, 0xc0, 480000000, 2000000, 40000000,
+ 1000000, 6000000, 48000000, 960000000, tegra_pll_u_freq_table,
+ 1000, tegra30_pll_ops, 0, NULL, pll_ref);
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+ /* 1.7 GHz */
+ { 12000000, 1700000000, 850, 6, 1, 8},
+ { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
+ { 26000000, 1700000000, 850, 13, 1, 8},
+
+ /* 1.6 GHz */
+ { 12000000, 1600000000, 800, 6, 1, 8},
+ { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
+ { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
+ { 19200000, 1600000000, 500, 6, 1, 8},
+ { 26000000, 1600000000, 800, 13, 1, 8},
+
+ /* 1.5 GHz */
+ { 12000000, 1500000000, 750, 6, 1, 8},
+ { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
+ { 16800000, 1500000000, 625, 7, 1, 8},
+ { 19200000, 1500000000, 625, 8, 1, 8},
+ { 26000000, 1500000000, 750, 13, 1, 8},
+
+ /* 1.4 GHz */
+ { 12000000, 1400000000, 700, 6, 1, 8},
+ { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
+ { 16800000, 1400000000, 1000, 12, 1, 8},
+ { 19200000, 1400000000, 875, 12, 1, 8},
+ { 26000000, 1400000000, 700, 13, 1, 8},
+
+ /* 1.3 GHz */
+ { 12000000, 1300000000, 975, 9, 1, 8},
+ { 13000000, 1300000000, 1000, 10, 1, 8},
+ { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 26000000, 1300000000, 650, 13, 1, 8},
+
+ /* 1.2 GHz */
+ { 12000000, 1200000000, 1000, 10, 1, 8},
+ { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
+ { 16800000, 1200000000, 1000, 14, 1, 8},
+ { 19200000, 1200000000, 1000, 16, 1, 8},
+ { 26000000, 1200000000, 600, 13, 1, 8},
+
+ /* 1.1 GHz */
+ { 12000000, 1100000000, 825, 9, 1, 8},
+ { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
+ { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
+ { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
+ { 26000000, 1100000000, 550, 13, 1, 8},
+
+ /* 1 GHz */
+ { 12000000, 1000000000, 1000, 12, 1, 8},
+ { 13000000, 1000000000, 1000, 13, 1, 8},
+ { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 8},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX, 0xe0, 1700000000,
+ 2000000, 31000000, 1000000, 6000000, 20000000, 1700000000,
+ tegra_pll_x_freq_table, 300, tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_x_out0, DIV_2 | PLLX, 0, 0, 850000000, tegra30_pll_div_ops,
+ pll_x, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ { 12000000, 100000000, 150, 1, 18, 11},
+ { 216000000, 100000000, 200, 18, 24, 13},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 2000000, 216000000,
+ 12000000, 12000000, 1200000000, 2400000000U,
+ tegra_pll_e_freq_table, 300, tegra30_plle_ops, 100000000, NULL,
+ pll_ref);
+
+static const char *mux_plle[] = {
+ "pll_e",
+};
+
+static struct clk *mux_plle_p[] = {
+ &tegra_pll_e,
+};
+
+static struct clk tegra_cml0;
+static struct clk_tegra tegra_cml0_hw = {
+ .hw = {
+ .clk = &tegra_cml0,
+ },
+ .reg = 0x48c,
+ .fixed_rate = 100000000,
+ .u.periph = {
+ .clk_num = 0,
+ },
+};
+DEFINE_CLK_TEGRA(cml0, 0, &tegra_cml_clk_ops, 0, mux_plle,
+ mux_plle_p, &tegra_pll_e);
+
+static struct clk tegra_cml1;
+static struct clk_tegra tegra_cml1_hw = {
+ .hw = {
+ .clk = &tegra_cml1,
+ },
+ .reg = 0x48c,
+ .fixed_rate = 100000000,
+ .u.periph = {
+ .clk_num = 1,
+ },
+};
+DEFINE_CLK_TEGRA(cml1, 0, &tegra_cml_clk_ops, 0, mux_plle,
+ mux_plle_p, &tegra_pll_e);
+
+static struct clk tegra_pciex;
+static struct clk_tegra tegra_pciex_hw = {
+ .hw = {
+ .clk = &tegra_pciex,
+ },
+ .reg = 0x48c,
+ .fixed_rate = 100000000,
+ .reset = tegra30_periph_clk_reset,
+ .u.periph = {
+ .clk_num = 74,
+ },
+};
+DEFINE_CLK_TEGRA(pciex, 0, &tegra_pciex_clk_ops, 0, mux_plle,
+ mux_plle_p, &tegra_pll_e);
+
+#define SYNC_SOURCE(_name) \
+ static struct clk tegra_##_name##_sync; \
+ static struct clk_tegra tegra_##_name##_sync_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name##_sync, \
+ }, \
+ .max_rate = 24000000, \
+ .fixed_rate = 24000000, \
+ }; \
+ static struct clk tegra_##_name##_sync = { \
+ .name = #_name "_sync", \
+ .hw = &tegra_##_name##_sync_hw.hw, \
+ .ops = &tegra_sync_source_ops, \
+ .flags = CLK_IS_ROOT, \
+ };
+
+SYNC_SOURCE(spdif_in);
+SYNC_SOURCE(i2s0);
+SYNC_SOURCE(i2s1);
+SYNC_SOURCE(i2s2);
+SYNC_SOURCE(i2s3);
+SYNC_SOURCE(i2s4);
+SYNC_SOURCE(vimclk);
+
+static struct clk *tegra_sync_source_list[] = {
+ &tegra_spdif_in_sync,
+ &tegra_i2s0_sync,
+ &tegra_i2s1_sync,
+ &tegra_i2s2_sync,
+ &tegra_i2s3_sync,
+ &tegra_i2s4_sync,
+ &tegra_vimclk_sync,
+};
+
+static const char *mux_audio_sync_clk[] = {
+ "spdif_in_sync",
+ "i2s0_sync",
+ "i2s1_sync",
+ "i2s2_sync",
+ "i2s3_sync",
+ "i2s4_sync",
+ "vimclk_sync",
+};
+
+#define AUDIO_SYNC_CLK(_name, _index) \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .max_rate = 24000000, \
+ .reg = 0x4A0 + (_index) * 4, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &tegra30_audio_sync_clk_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent_names = mux_audio_sync_clk, \
+ .parents = tegra_sync_source_list, \
+ .num_parents = ARRAY_SIZE(mux_audio_sync_clk), \
+ };
+
+AUDIO_SYNC_CLK(audio0, 0);
+AUDIO_SYNC_CLK(audio1, 1);
+AUDIO_SYNC_CLK(audio2, 2);
+AUDIO_SYNC_CLK(audio3, 3);
+AUDIO_SYNC_CLK(audio4, 4);
+AUDIO_SYNC_CLK(audio5, 5);
+
+static struct clk *tegra_clk_audio_list[] = {
+ &tegra_audio0,
+ &tegra_audio1,
+ &tegra_audio2,
+ &tegra_audio3,
+ &tegra_audio4,
+ &tegra_audio5, /* SPDIF */
+};
+
+#define AUDIO_SYNC_2X_CLK(_name, _index) \
+ static const char *_name##_parent_names[] = { \
+ "tegra_" #_name, \
+ }; \
+ static struct clk *_name##_parents[] = { \
+ &tegra_##_name, \
+ }; \
+ static struct clk tegra_##_name##_2x; \
+ static struct clk_tegra tegra_##_name##_2x_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name##_2x, \
+ }, \
+ .flags = PERIPH_NO_RESET, \
+ .max_rate = 48000000, \
+ .reg = 0x49C, \
+ .reg_shift = 24 + (_index), \
+ .u.periph = { \
+ .clk_num = 113 + (_index), \
+ }, \
+ }; \
+ static struct clk tegra_##_name##_2x = { \
+ .name = #_name "_2x", \
+ .ops = &tegra30_clk_double_ops, \
+ .hw = &tegra_##_name##_2x_hw.hw, \
+ .parent_names = _name##_parent_names, \
+ .parents = _name##_parents, \
+ .parent = &tegra_##_name, \
+ .num_parents = 1, \
+ };
+
+AUDIO_SYNC_2X_CLK(audio0, 0);
+AUDIO_SYNC_2X_CLK(audio1, 1);
+AUDIO_SYNC_2X_CLK(audio2, 2);
+AUDIO_SYNC_2X_CLK(audio3, 3);
+AUDIO_SYNC_2X_CLK(audio4, 4);
+AUDIO_SYNC_2X_CLK(audio5, 5); /* SPDIF */
+
+static struct clk *tegra_clk_audio_2x_list[] = {
+ &tegra_audio0_2x,
+ &tegra_audio1_2x,
+ &tegra_audio2_2x,
+ &tegra_audio3_2x,
+ &tegra_audio4_2x,
+ &tegra_audio5_2x, /* SPDIF */
+};
+
+#define MUX_I2S_SPDIF(_id) \
+static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { \
+ "pll_a_out0", \
+ #_id "_2x", \
+ "pll_p", \
+ "clk_m", \
+}; \
+static struct clk *mux_pllaout0_##_id##_2x_pllp_clkm_p[] = { \
+ &tegra_pll_a_out0, \
+ &tegra_##_id##_2x, \
+ &tegra_pll_p, \
+ &tegra_clk_m, \
+};
+
+MUX_I2S_SPDIF(audio0);
+MUX_I2S_SPDIF(audio1);
+MUX_I2S_SPDIF(audio2);
+MUX_I2S_SPDIF(audio3);
+MUX_I2S_SPDIF(audio4);
+MUX_I2S_SPDIF(audio5); /* SPDIF */
+
+static struct clk tegra_extern1;
+static struct clk tegra_extern2;
+static struct clk tegra_extern3;
+
+/* External clock outputs (through PMC) */
+#define MUX_EXTERN_OUT(_id) \
+static const char *mux_clkm_clkm2_clkm4_extern##_id[] = { \
+ "clk_m", \
+ "clk_m_div2", \
+ "clk_m_div4", \
+ "extern" #_id, \
+}; \
+static struct clk *mux_clkm_clkm2_clkm4_extern##_id##_p[] = { \
+ &tegra_clk_m, \
+ &tegra_clk_m_div2, \
+ &tegra_clk_m_div4, \
+ &tegra_extern##_id, \
+};
+
+MUX_EXTERN_OUT(1);
+MUX_EXTERN_OUT(2);
+MUX_EXTERN_OUT(3);
+
+#define CLK_OUT_CLK(_name, _index) \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .lookup = { \
+ .dev_id = #_name, \
+ .con_id = "extern" #_index, \
+ }, \
+ .flags = MUX_CLK_OUT, \
+ .fixed_rate = 216000000, \
+ .reg = 0x1a8, \
+ .u.periph = { \
+ .clk_num = (_index - 1) * 8 + 2, \
+ }, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &tegra_clk_out_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent_names = mux_clkm_clkm2_clkm4_extern##_index, \
+ .parents = mux_clkm_clkm2_clkm4_extern##_index##_p, \
+ .num_parents = ARRAY_SIZE(mux_clkm_clkm2_clkm4_extern##_index),\
+ };
+
+CLK_OUT_CLK(clk_out_1, 1);
+CLK_OUT_CLK(clk_out_2, 2);
+CLK_OUT_CLK(clk_out_3, 3);
+
+static struct clk *tegra_clk_out_list[] = {
+ &tegra_clk_out_1,
+ &tegra_clk_out_2,
+ &tegra_clk_out_3,
+};
+
+static const char *mux_sclk[] = {
+ "clk_m",
+ "pll_c_out1",
+ "pll_p_out4",
+ "pll_p_out3",
+ "pll_p_out2",
+ "dummy",
+ "clk_32k",
+ "pll_m_out1",
+};
+
+static struct clk *mux_sclk_p[] = {
+ &tegra_clk_m,
+ &tegra_pll_c_out1,
+ &tegra_pll_p_out4,
+ &tegra_pll_p_out3,
+ &tegra_pll_p_out2,
+ NULL,
+ &tegra_clk_32k,
+ &tegra_pll_m_out1,
+};
+
+static struct clk tegra_clk_sclk;
+static struct clk_tegra tegra_clk_sclk_hw = {
+ .hw = {
+ .clk = &tegra_clk_sclk,
+ },
+ .reg = 0x28,
+ .max_rate = 334000000,
+ .min_rate = 40000000,
+};
+
+static struct clk tegra_clk_sclk = {
+ .name = "sclk",
+ .ops = &tegra30_super_ops,
+ .hw = &tegra_clk_sclk_hw.hw,
+ .parent_names = mux_sclk,
+ .parents = mux_sclk_p,
+ .num_parents = ARRAY_SIZE(mux_sclk),
+};
+
+static const char *mux_blink[] = {
+ "clk_32k",
+};
+
+static struct clk *mux_blink_p[] = {
+ &tegra_clk_32k,
+};
+
+static struct clk tegra_clk_blink;
+static struct clk_tegra tegra_clk_blink_hw = {
+ .hw = {
+ .clk = &tegra_clk_blink,
+ },
+ .reg = 0x40,
+ .max_rate = 32768,
+};
+static struct clk tegra_clk_blink = {
+ .name = "blink",
+ .ops = &tegra30_blink_clk_ops,
+ .hw = &tegra_clk_blink_hw.hw,
+ .parent = &tegra_clk_32k,
+ .parent_names = mux_blink,
+ .parents = mux_blink_p,
+ .num_parents = ARRAY_SIZE(mux_blink),
+};
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+ "pll_m",
+ "pll_c",
+ "pll_p",
+ "pll_a_out0",
+};
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+ "pll_p",
+ "pll_c",
+ "pll_m",
+ "clk_m",
+};
+
+static const char *mux_pllp_clkm[] = {
+ "pll_p",
+ "dummy",
+ "dummy",
+ "clk_m",
+};
+
+static const char *mux_pllp_plld_pllc_clkm[] = {
+ "pll_p",
+ "pll_d_out0",
+ "pll_c",
+ "clk_m",
+};
+
+static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+ "pll_p",
+ "pll_m",
+ "pll_d_out0",
+ "pll_a_out0",
+ "pll_c",
+ "pll_d2_out0",
+ "clk_m",
+};
+
+static const char *mux_plla_pllc_pllp_clkm[] = {
+ "pll_a_out0",
+ "dummy",
+ "pll_p",
+ "clk_m"
+};
+
+static const char *mux_pllp_pllc_clk32_clkm[] = {
+ "pll_p",
+ "pll_c",
+ "clk_32k",
+ "clk_m",
+};
+
+static const char *mux_pllp_pllc_clkm_clk32[] = {
+ "pll_p",
+ "pll_c",
+ "clk_m",
+ "clk_32k",
+};
+
+static const char *mux_pllp_pllc_pllm[] = {
+ "pll_p",
+ "pll_c",
+ "pll_m",
+};
+
+static const char *mux_clk_m[] = {
+ "clk_m",
+};
+
+static const char *mux_pllp_out3[] = {
+ "pll_p_out3",
+};
+
+static const char *mux_plld_out0[] = {
+ "pll_d_out0",
+};
+
+static const char *mux_plld_out0_plld2_out0[] = {
+ "pll_d_out0",
+ "pll_d2_out0",
+};
+
+static const char *mux_clk_32k[] = {
+ "clk_32k",
+};
+
+static const char *mux_plla_clk32_pllp_clkm_plle[] = {
+ "pll_a_out0",
+ "clk_32k",
+ "pll_p",
+ "clk_m",
+ "pll_e",
+};
+
+static const char *mux_cclk_g[] = {
+ "clk_m",
+ "pll_c",
+ "clk_32k",
+ "pll_m",
+ "pll_p",
+ "pll_p_out4",
+ "pll_p_out3",
+ "dummy",
+ "pll_x",
+};
+
+static struct clk *mux_pllm_pllc_pllp_plla_p[] = {
+ &tegra_pll_m,
+ &tegra_pll_c,
+ &tegra_pll_p,
+ &tegra_pll_a_out0,
+};
+
+static struct clk *mux_pllp_pllc_pllm_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_pll_m,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_clkm_p[] = {
+ &tegra_pll_p,
+ NULL,
+ NULL,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_plld_pllc_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_d_out0,
+ &tegra_pll_c,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllm_plld_plla_pllc_plld2_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_m,
+ &tegra_pll_d_out0,
+ &tegra_pll_a_out0,
+ &tegra_pll_c,
+ &tegra_pll_d2_out0,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_plla_pllc_pllp_clkm_p[] = {
+ &tegra_pll_a_out0,
+ NULL,
+ &tegra_pll_p,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllc_clk32_clkm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_clk_32k,
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllc_clkm_clk32_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_clk_m,
+ &tegra_clk_32k,
+};
+
+static struct clk *mux_pllp_pllc_pllm_p[] = {
+ &tegra_pll_p,
+ &tegra_pll_c,
+ &tegra_pll_m,
+};
+
+static struct clk *mux_clk_m_p[] = {
+ &tegra_clk_m,
+};
+
+static struct clk *mux_pllp_out3_p[] = {
+ &tegra_pll_p_out3,
+};
+
+static struct clk *mux_plld_out0_p[] = {
+ &tegra_pll_d_out0,
+};
+
+static struct clk *mux_plld_out0_plld2_out0_p[] = {
+ &tegra_pll_d_out0,
+ &tegra_pll_d2_out0,
+};
+
+static struct clk *mux_clk_32k_p[] = {
+ &tegra_clk_32k,
+};
+
+static struct clk *mux_plla_clk32_pllp_clkm_plle_p[] = {
+ &tegra_pll_a_out0,
+ &tegra_clk_32k,
+ &tegra_pll_p,
+ &tegra_clk_m,
+ &tegra_pll_e,
+};
+
+static struct clk *mux_cclk_g_p[] = {
+ &tegra_clk_m,
+ &tegra_pll_c,
+ &tegra_clk_32k,
+ &tegra_pll_m,
+ &tegra_pll_p,
+ &tegra_pll_p_out4,
+ &tegra_pll_p_out3,
+ NULL,
+ &tegra_pll_x,
+};
+
+static struct clk tegra_clk_cclk_g;
+static struct clk_tegra tegra_clk_cclk_g_hw = {
+ .hw = {
+ .clk = &tegra_clk_cclk_g,
+ },
+ .flags = DIV_U71 | DIV_U71_INT,
+ .reg = 0x368,
+ .max_rate = 1700000000,
+};
+static struct clk tegra_clk_cclk_g = {
+ .name = "cclk_g",
+ .ops = &tegra30_super_ops,
+ .hw = &tegra_clk_cclk_g_hw.hw,
+ .parent_names = mux_cclk_g,
+ .parents = mux_cclk_g_p,
+ .num_parents = ARRAY_SIZE(mux_cclk_g),
+};
+
+static const char *mux_twd[] = {
+ "cclk_g",
+};
+
+static struct clk *mux_twd_p[] = {
+ &tegra_clk_cclk_g,
+};
+
+static struct clk tegra30_clk_twd;
+static struct clk_tegra tegra30_clk_twd_hw = {
+ .hw = {
+ .clk = &tegra30_clk_twd,
+ },
+ .max_rate = 1400000000,
+ .mul = 1,
+ .div = 2,
+};
+
+static struct clk tegra30_clk_twd = {
+ .name = "twd",
+ .ops = &tegra30_twd_ops,
+ .hw = &tegra30_clk_twd_hw.hw,
+ .parent = &tegra_clk_cclk_g,
+ .parent_names = mux_twd,
+ .parents = mux_twd_p,
+ .num_parents = ARRAY_SIZE(mux_twd),
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, \
+ _max, _inputs, _flags) \
+ static struct clk tegra_##_name; \
+ static struct clk_tegra tegra_##_name##_hw = { \
+ .hw = { \
+ .clk = &tegra_##_name, \
+ }, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ .reg = _reg, \
+ .flags = _flags, \
+ .max_rate = _max, \
+ .u.periph = { \
+ .clk_num = _clk_num, \
+ }, \
+ .reset = &tegra30_periph_clk_reset, \
+ }; \
+ static struct clk tegra_##_name = { \
+ .name = #_name, \
+ .ops = &tegra30_periph_clk_ops, \
+ .hw = &tegra_##_name##_hw.hw, \
+ .parent_names = _inputs, \
+ .parents = _inputs##_p, \
+ .num_parents = ARRAY_SIZE(_inputs), \
+ };
+
+PERIPH_CLK(apbdma, "tegra-apbdma", NULL, 34, 0, 26000000, mux_clk_m, 0);
+PERIPH_CLK(rtc, "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB);
+PERIPH_CLK(kbc, "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB);
+PERIPH_CLK(timer, "timer", NULL, 5, 0, 26000000, mux_clk_m, 0);
+PERIPH_CLK(kfuse, "kfuse-tegra", NULL, 40, 0, 26000000, mux_clk_m, 0);
+PERIPH_CLK(fuse, "fuse-tegra", "fuse", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB);
+PERIPH_CLK(fuse_burn, "fuse-tegra", "fuse_burn", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB);
+PERIPH_CLK(apbif, "tegra30-ahub", "apbif", 107, 0, 26000000, mux_clk_m, 0);
+PERIPH_CLK(i2s0, "tegra30-i2s.0", NULL, 30, 0x1d8, 26000000, mux_pllaout0_audio0_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s1, "tegra30-i2s.1", NULL, 11, 0x100, 26000000, mux_pllaout0_audio1_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s2, "tegra30-i2s.2", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s3, "tegra30-i2s.3", NULL, 101, 0x3bc, 26000000, mux_pllaout0_audio3_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s4, "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(spdif_out, "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio5_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(spdif_in, "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(pwm, "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(d_audio, "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(dam0, "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(dam1, "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(dam2, "tegra30-dam.2", NULL, 110, 0x3e0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71);
+PERIPH_CLK(hda, "tegra30-hda", "hda", 125, 0x428, 108000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(hda2codec_2x, "tegra30-hda", "hda2codec", 111, 0x3e4, 48000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(hda2hdmi, "tegra30-hda", "hda2hdmi", 128, 0, 48000000, mux_clk_m, 0);
+PERIPH_CLK(sbc1, "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc2, "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc3, "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc4, "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc5, "spi_tegra.4", NULL, 104, 0x3c8, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc6, "spi_tegra.5", NULL, 105, 0x3cc, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sata_oob, "tegra_sata_oob", NULL, 123, 0x420, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sata, "tegra_sata", NULL, 124, 0x424, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(sata_cold, "tegra_sata_cold", NULL, 129, 0, 48000000, mux_clk_m, 0);
+PERIPH_CLK(ndflash, "tegra_nand", NULL, 13, 0x160, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(ndspeed, "tegra_nand_speed", NULL, 80, 0x3f8, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(vfir, "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sdmmc1, "sdhci-tegra.0", NULL, 14, 0x150, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc2, "sdhci-tegra.1", NULL, 9, 0x154, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc3, "sdhci-tegra.2", NULL, 69, 0x1bc, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc4, "sdhci-tegra.3", NULL, 15, 0x164, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vcp, "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(bsea, "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(bsev, "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(vde, "vde", NULL, 61, 0x1c8, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(csite, "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* max rate ??? */
+PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
+PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */
+PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c4, "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c5, "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartd, "tegra-uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uarte, "tegra-uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(vi, "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(3d, "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET);
+PERIPH_CLK(3d2, "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET);
+PERIPH_CLK(2d, "2d", NULL, 21, 0x15c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE);
+PERIPH_CLK(vi_sensor, "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET);
+PERIPH_CLK(epp, "epp", NULL, 19, 0x16c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(mpe, "mpe", NULL, 60, 0x170, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(host1x, "host1x", NULL, 28, 0x180, 260000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(cve, "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvo, "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(dtv, "dtv", NULL, 79, 0x1dc, 250000000, mux_clk_m, 0);
+PERIPH_CLK(hdmi, "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8 | DIV_U71);
+PERIPH_CLK(tvdac, "tvdac", NULL, 53, 0x194, 220000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(disp1, "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8);
+PERIPH_CLK(disp2, "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8);
+PERIPH_CLK(usbd, "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(usb2, "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(usb3, "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
+PERIPH_CLK(dsia, "tegradc.0", "dsia", 48, 0, 500000000, mux_plld_out0, 0);
+PERIPH_CLK(csi, "tegra_camera", "csi", 52, 0, 102000000, mux_pllp_out3, 0);
+PERIPH_CLK(isp, "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0); /* same frequency as VI */
+PERIPH_CLK(csus, "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET);
+PERIPH_CLK(tsensor, "tegra-tsensor", NULL, 100, 0x3b8, 216000000, mux_pllp_pllc_clkm_clk32, MUX | DIV_U71);
+PERIPH_CLK(actmon, "actmon", NULL, 119, 0x3e8, 216000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71);
+PERIPH_CLK(extern1, "extern1", NULL, 120, 0x3ec, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71);
+PERIPH_CLK(extern2, "extern2", NULL, 121, 0x3f0, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71);
+PERIPH_CLK(extern3, "extern3", NULL, 122, 0x3f4, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71);
+PERIPH_CLK(i2cslow, "i2cslow", NULL, 81, 0x3fc, 26000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(pcie, "tegra-pcie", "pcie", 70, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(afi, "tegra-pcie", "afi", 72, 0, 250000000, mux_clk_m, 0);
+PERIPH_CLK(se, "se", NULL, 127, 0x42c, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT);
+
+static struct clk tegra_dsib;
+static struct clk_tegra tegra_dsib_hw = {
+ .hw = {
+ .clk = &tegra_dsib,
+ },
+ .lookup = {
+ .dev_id = "tegradc.1",
+ .con_id = "dsib",
+ },
+ .reg = 0xd0,
+ .flags = MUX | PLLD,
+ .max_rate = 500000000,
+ .u.periph = {
+ .clk_num = 82,
+ },
+ .reset = &tegra30_periph_clk_reset,
+};
+static struct clk tegra_dsib = {
+ .name = "dsib",
+ .ops = &tegra30_dsib_clk_ops,
+ .hw = &tegra_dsib_hw.hw,
+ .parent_names = mux_plld_out0_plld2_out0,
+ .parents = mux_plld_out0_plld2_out0_p,
+ .num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0),
+};
+
+struct clk *tegra_list_clks[] = {
+ &tegra_apbdma,
+ &tegra_rtc,
+ &tegra_kbc,
+ &tegra_kfuse,
+ &tegra_fuse,
+ &tegra_fuse_burn,
+ &tegra_apbif,
+ &tegra_i2s0,
+ &tegra_i2s1,
+ &tegra_i2s2,
+ &tegra_i2s3,
+ &tegra_i2s4,
+ &tegra_spdif_out,
+ &tegra_spdif_in,
+ &tegra_pwm,
+ &tegra_d_audio,
+ &tegra_dam0,
+ &tegra_dam1,
+ &tegra_dam2,
+ &tegra_hda,
+ &tegra_hda2codec_2x,
+ &tegra_hda2hdmi,
+ &tegra_sbc1,
+ &tegra_sbc2,
+ &tegra_sbc3,
+ &tegra_sbc4,
+ &tegra_sbc5,
+ &tegra_sbc6,
+ &tegra_sata_oob,
+ &tegra_sata,
+ &tegra_sata_cold,
+ &tegra_ndflash,
+ &tegra_ndspeed,
+ &tegra_vfir,
+ &tegra_sdmmc1,
+ &tegra_sdmmc2,
+ &tegra_sdmmc3,
+ &tegra_sdmmc4,
+ &tegra_vcp,
+ &tegra_bsea,
+ &tegra_bsev,
+ &tegra_vde,
+ &tegra_csite,
+ &tegra_la,
+ &tegra_owr,
+ &tegra_nor,
+ &tegra_mipi,
+ &tegra_i2c1,
+ &tegra_i2c2,
+ &tegra_i2c3,
+ &tegra_i2c4,
+ &tegra_i2c5,
+ &tegra_uarta,
+ &tegra_uartb,
+ &tegra_uartc,
+ &tegra_uartd,
+ &tegra_uarte,
+ &tegra_vi,
+ &tegra_3d,
+ &tegra_3d2,
+ &tegra_2d,
+ &tegra_vi_sensor,
+ &tegra_epp,
+ &tegra_mpe,
+ &tegra_host1x,
+ &tegra_cve,
+ &tegra_tvo,
+ &tegra_dtv,
+ &tegra_hdmi,
+ &tegra_tvdac,
+ &tegra_disp1,
+ &tegra_disp2,
+ &tegra_usbd,
+ &tegra_usb2,
+ &tegra_usb3,
+ &tegra_dsia,
+ &tegra_dsib,
+ &tegra_csi,
+ &tegra_isp,
+ &tegra_csus,
+ &tegra_tsensor,
+ &tegra_actmon,
+ &tegra_extern1,
+ &tegra_extern2,
+ &tegra_extern3,
+ &tegra_i2cslow,
+ &tegra_pcie,
+ &tegra_afi,
+ &tegra_se,
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con) \
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ }
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration. List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+ CLK_DUPLICATE("uarta", "serial8250.0", NULL),
+ CLK_DUPLICATE("uartb", "serial8250.1", NULL),
+ CLK_DUPLICATE("uartc", "serial8250.2", NULL),
+ CLK_DUPLICATE("uartd", "serial8250.3", NULL),
+ CLK_DUPLICATE("uarte", "serial8250.4", NULL),
+ CLK_DUPLICATE("usbd", "utmip-pad", NULL),
+ CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+ CLK_DUPLICATE("usbd", "tegra-otg", NULL),
+ CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
+ CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
+ CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
+ CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
+ CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
+ CLK_DUPLICATE("bsev", "nvavp", "bsev"),
+ CLK_DUPLICATE("vde", "tegra-aes", "vde"),
+ CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
+ CLK_DUPLICATE("bsea", "nvavp", "bsea"),
+ CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
+ CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
+ CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
+ CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
+ CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
+ CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
+ CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
+ CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
+ CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
+ CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
+ CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
+ CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
+ CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
+ CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
+ CLK_DUPLICATE("twd", "smp_twd", NULL),
+ CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+ CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+ CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+ CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+ CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+ CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+ CLK_DUPLICATE("dam0", NULL, "dam0"),
+ CLK_DUPLICATE("dam1", NULL, "dam1"),
+ CLK_DUPLICATE("dam2", NULL, "dam2"),
+ CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
+};
+
+struct clk *tegra_ptr_clks[] = {
+ &tegra_clk_32k,
+ &tegra_clk_m,
+ &tegra_clk_m_div2,
+ &tegra_clk_m_div4,
+ &tegra_pll_ref,
+ &tegra_pll_m,
+ &tegra_pll_m_out1,
+ &tegra_pll_c,
+ &tegra_pll_c_out1,
+ &tegra_pll_p,
+ &tegra_pll_p_out1,
+ &tegra_pll_p_out2,
+ &tegra_pll_p_out3,
+ &tegra_pll_p_out4,
+ &tegra_pll_a,
+ &tegra_pll_a_out0,
+ &tegra_pll_d,
+ &tegra_pll_d_out0,
+ &tegra_pll_d2,
+ &tegra_pll_d2_out0,
+ &tegra_pll_u,
+ &tegra_pll_x,
+ &tegra_pll_x_out0,
+ &tegra_pll_e,
+ &tegra_clk_cclk_g,
+ &tegra_cml0,
+ &tegra_cml1,
+ &tegra_pciex,
+ &tegra_clk_sclk,
+ &tegra_clk_blink,
+ &tegra30_clk_twd,
+};
+
+static void tegra30_init_one_clock(struct clk *c)
+{
+ struct clk_tegra *clk = to_clk_tegra(c->hw);
+ __clk_init(NULL, c);
+ INIT_LIST_HEAD(&clk->shared_bus_list);
+ if (!clk->lookup.dev_id && !clk->lookup.con_id)
+ clk->lookup.con_id = c->name;
+ clk->lookup.clk = c;
+ clkdev_add(&clk->lookup);
+ tegra_clk_add(c);
+}
+
+void __init tegra30_init_clocks(void)
+{
+ int i;
+ struct clk *c;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+ tegra30_init_one_clock(tegra_ptr_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+ tegra30_init_one_clock(tegra_list_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+ c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+ if (!c) {
+ pr_err("%s: Unknown duplicate clock %s\n", __func__,
+ tegra_clk_duplicates[i].name);
+ continue;
+ }
+
+ tegra_clk_duplicates[i].lookup.clk = c;
+ clkdev_add(&tegra_clk_duplicates[i].lookup);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
+ tegra30_init_one_clock(tegra_sync_source_list[i]);
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
+ tegra30_init_one_clock(tegra_clk_audio_list[i]);
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
+ tegra30_init_one_clock(tegra_clk_audio_2x_list[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
+ tegra30_init_one_clock(tegra_clk_out_list[i]);
+
+ tegra30_cpu_car_ops_init();
+}
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_CPU_CAR_H
+#define __MACH_TEGRA_CPU_CAR_H
+
+/*
+ * Tegra CPU clock and reset control ops
+ *
+ * wait_for_reset:
+ * keep waiting until the CPU in reset state
+ * put_in_reset:
+ * put the CPU in reset state
+ * out_of_reset:
+ * release the CPU from reset state
+ * enable_clock:
+ * CPU clock un-gate
+ * disable_clock:
+ * CPU clock gate
+ */
+struct tegra_cpu_car_ops {
+ void (*wait_for_reset)(u32 cpu);
+ void (*put_in_reset)(u32 cpu);
+ void (*out_of_reset)(u32 cpu);
+ void (*enable_clock)(u32 cpu);
+ void (*disable_clock)(u32 cpu);
+};
+
+extern struct tegra_cpu_car_ops *tegra_cpu_car_ops;
+
+static inline void tegra_wait_cpu_in_reset(u32 cpu)
+{
+ if (WARN_ON(!tegra_cpu_car_ops->wait_for_reset))
+ return;
+
+ tegra_cpu_car_ops->wait_for_reset(cpu);
+}
+
+static inline void tegra_put_cpu_in_reset(u32 cpu)
+{
+ if (WARN_ON(!tegra_cpu_car_ops->put_in_reset))
+ return;
+
+ tegra_cpu_car_ops->put_in_reset(cpu);
+}
+
+static inline void tegra_cpu_out_of_reset(u32 cpu)
+{
+ if (WARN_ON(!tegra_cpu_car_ops->out_of_reset))
+ return;
+
+ tegra_cpu_car_ops->out_of_reset(cpu);
+}
+
+static inline void tegra_enable_cpu_clock(u32 cpu)
+{
+ if (WARN_ON(!tegra_cpu_car_ops->enable_clock))
+ return;
+
+ tegra_cpu_car_ops->enable_clock(cpu);
+}
+
+static inline void tegra_disable_cpu_clock(u32 cpu)
+{
+ if (WARN_ON(!tegra_cpu_car_ops->disable_clock))
+ return;
+
+ tegra_cpu_car_ops->disable_clock(cpu);
+}
+
+void tegra20_cpu_car_ops_init(void);
+void tegra30_cpu_car_ops_init(void);
+
+#endif /* __MACH_TEGRA_CPU_CAR_H */
if ARCH_U300
-menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+menu "ST-Ericsson AB U300/U335 Platform"
comment "ST-Ericsson Mobile Platform Products"
select PINCTRL_U300
select PINCTRL_COH901
-comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
-
-choice
- prompt "U300/U330/U335/U365 system type"
- default MACH_U300_BS2X
- ---help---
- You need to select the target system, i.e. the
- U300/U330/U335/U365 board that you want to compile your kernel
- for.
-
-config MACH_U300_BS2X
- bool "S26/S26/B25/B26 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S26/S25 test products. (Also works on
- B26/B25 big boards.)
-
-config MACH_U300_BS330
- bool "S330/B330 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S330/B330 test products.
-
-config MACH_U300_BS335
- bool "S335/B335 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S335/B335 test products.
-
-config MACH_U300_BS365
- bool "S365/B365 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S365/B365 test products.
-
-endchoice
+comment "ST-Ericsson U300/U335 Feature Selections"
config U300_DEBUG
bool "Debug support for U300"
obj-n :=
obj- :=
-obj-$(CONFIG_ARCH_U300) += u300.o
obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_I2C_STU300) += i2c.o
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2010 ST-Ericsson SA
+ * Copyright (C) 2007-2012 ST-Ericsson SA
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
#include <mach/coh901318.h>
#include <mach/hardware.h>
#include <mach/syscon.h>
-#include <mach/dma_channels.h>
-#include <mach/gpio-u300.h>
+#include <mach/irqs.h>
+#include "timer.h"
#include "spi.h"
#include "i2c.h"
#include "u300-gpio.h"
+#include "dma_channels.h"
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
},
};
-void __init u300_map_io(void)
+static void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
/* We enable a real big DMA buffer if need be. */
{ IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
-#ifdef CONFIG_MACH_U300_BS335
static struct amba_pl011_data uart1_plat_data = {
#ifdef CONFIG_COH901318
.dma_filter = coh901318_filter_id,
/* Fast device at 0x7000 offset */
static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
{ IRQ_U300_UART1 }, &uart1_plat_data);
-#endif
/* AHB device at 0x4000 offset */
static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
*/
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
-#ifdef CONFIG_MACH_U300_BS335
&uart1_device,
-#endif
&pl022_device,
&pl172_device,
&mmcsd_device,
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
-#endif
-#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
.start = IRQ_U300_GPIO_PORT5,
.end = IRQ_U300_GPIO_PORT6,
.flags = IORESOURCE_IRQ,
},
-#endif /* CONFIG_MACH_U300_BS335 */
};
static struct resource keypad_resources[] = {
}
};
-#ifdef CONFIG_MACH_U300_BS335
/* points out all dma slave channels.
* Syntax is [A1, B1, A2, B2, .... ,-1,-1]
* Select all channels from A to B, end of list is marked with -1,-1
static int dma_memcpy_channels[] = {
U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
-#else /* CONFIG_MACH_U300_BS335 */
-
-static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
-static int dma_memcpy_channels[] = {
- U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
-
-#endif
-
/** register dma for memory access
*
* active 1 means dma intends to access memory
.param.ctrl_lli = flags_memcpy_lli,
.param.ctrl_lli_last = flags_memcpy_lli_last,
},
-#ifdef CONFIG_MACH_U300_BS335
{
.number = U300_DMA_UART1_TX,
.name = "UART1 TX",
.name = "UART1 RX",
.priority_high = 0,
}
-#else
- {
- .number = U300_DMA_GENERAL_PURPOSE_9,
- .name = "GENERAL 09",
- .priority_high = 0,
-
- .param.config = flags_memcpy_config,
- .param.ctrl_lli_chained = flags_memcpy_lli_chained,
- .param.ctrl_lli = flags_memcpy_lli,
- .param.ctrl_lli_last = flags_memcpy_lli_last,
- },
- {
- .number = U300_DMA_GENERAL_PURPOSE_10,
- .name = "GENERAL 10",
- .priority_high = 0,
-
- .param.config = flags_memcpy_config,
- .param.ctrl_lli_chained = flags_memcpy_lli_chained,
- .param.ctrl_lli = flags_memcpy_lli,
- .param.ctrl_lli_last = flags_memcpy_lli_last,
- }
-#endif
};
* GPIO block, with different number of ports.
*/
static struct u300_gpio_platform u300_gpio_plat = {
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
- .variant = U300_GPIO_COH901335,
- .ports = 3,
-#endif
-#ifdef CONFIG_MACH_U300_BS335
- .variant = U300_GPIO_COH901571_3_BS335,
.ports = 7,
-#endif
-#ifdef CONFIG_MACH_U300_BS365
- .variant = U300_GPIO_COH901571_3_BS365,
- .ports = 5,
-#endif
.gpio_base = 0,
.gpio_irq_base = IRQ_U300_GPIO_BASE,
.pinctrl_device = &pinctrl_device,
* together so some interrupts are connected to the first one and some
* to the second one.
*/
-void __init u300_init_irq(void)
+static void __init u300_init_irq(void)
{
u32 mask[2] = {0, 0};
struct clk *clk;
printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
"(chip ID 0x%04x)\n", chipname, val);
-#ifdef CONFIG_MACH_U300_BS330
- if ((val & 0xFF00U) != 0xd800) {
- printk(KERN_ERR "Platform configured for BS330 " \
- "with DB3200 but %s detected, expect problems!",
- chipname);
- }
-#endif
-#ifdef CONFIG_MACH_U300_BS335
if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
printk(KERN_ERR "Platform configured for BS335 " \
" with DB3350 but %s detected, expect problems!",
chipname);
}
-#endif
-#ifdef CONFIG_MACH_U300_BS365
- if ((val & 0xFF00U) != 0xe800) {
- printk(KERN_ERR "Platform configured for BS365 " \
- "with DB3210 but %s detected, expect problems!",
- chipname);
- }
-#endif
-
-
}
/*
}
}
-void __init u300_init_devices(void)
+static void __init u300_init_machine(void)
{
int i;
u16 val;
/* Forward declare this function from the watchdog */
void coh901327_watchdog_reset(void);
-void u300_restart(char mode, const char *cmd)
+static void u300_restart(char mode, const char *cmd)
{
switch (mode) {
case 's':
/* Wait for system do die/reset. */
while (1);
}
+
+MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
+ /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+ .atag_offset = 0x100,
+ .map_io = u300_map_io,
+ .nr_irqs = NR_IRQS_U300,
+ .init_irq = u300_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &u300_timer,
+ .init_machine = u300_init_machine,
+ .restart = u300_restart,
+MACHINE_END
--- /dev/null
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2012 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0 0
+#define U300_DMA_MSL_TX_1 1
+#define U300_DMA_MSL_TX_2 2
+#define U300_DMA_MSL_TX_3 3
+#define U300_DMA_MSL_TX_4 4
+#define U300_DMA_MSL_TX_5 5
+#define U300_DMA_MSL_TX_6 6
+#define U300_DMA_MSL_RX_0 7
+#define U300_DMA_MSL_RX_1 8
+#define U300_DMA_MSL_RX_2 9
+#define U300_DMA_MSL_RX_3 10
+#define U300_DMA_MSL_RX_4 11
+#define U300_DMA_MSL_RX_5 12
+#define U300_DMA_MSL_RX_6 13
+#define U300_DMA_MMCSD_RX_TX 14
+#define U300_DMA_MSPRO_TX 15
+#define U300_DMA_MSPRO_RX 16
+#define U300_DMA_UART0_TX 17
+#define U300_DMA_UART0_RX 18
+#define U300_DMA_APEX_TX 19
+#define U300_DMA_APEX_RX 20
+#define U300_DMA_PCM_I2S0_TX 21
+#define U300_DMA_PCM_I2S0_RX 22
+#define U300_DMA_PCM_I2S1_TX 23
+#define U300_DMA_PCM_I2S1_RX 24
+#define U300_DMA_XGAM_CDI 25
+#define U300_DMA_XGAM_PDI 26
+#define U300_DMA_SPI_TX 27
+#define U300_DMA_SPI_RX 28
+#define U300_DMA_GENERAL_PURPOSE_0 29
+#define U300_DMA_GENERAL_PURPOSE_1 30
+#define U300_DMA_GENERAL_PURPOSE_2 31
+#define U300_DMA_GENERAL_PURPOSE_3 32
+#define U300_DMA_GENERAL_PURPOSE_4 33
+#define U300_DMA_GENERAL_PURPOSE_5 34
+#define U300_DMA_GENERAL_PURPOSE_6 35
+#define U300_DMA_GENERAL_PURPOSE_7 36
+#define U300_DMA_GENERAL_PURPOSE_8 37
+#define U300_DMA_UART1_TX 38
+#define U300_DMA_UART1_RX 39
+
+#define U300_DMA_DEVICE_CHANNELS 32
+#define U300_DMA_CHANNELS 40
+
+
+#endif /* DMA_CHANNELS_H */
/*
* arch/arm/mach-u300/i2c.c
*
- * Copyright (C) 2009 ST-Ericsson AB
+ * Copyright (C) 2009-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
*
* Register board i2c devices
};
static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
-#ifdef CONFIG_MACH_U300_BS335
{
.type = "fwcam",
.addr = 0x10,
.type = "fwcam",
.addr = 0x5d,
},
-#else
- { },
-#endif
};
void __init u300_i2c_register_board_devices(void)
+++ /dev/null
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif
+++ /dev/null
-/*
- *
- * arch/arm/mach-u300/include/mach/dma_channels.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Map file for the U300 dma driver.
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef DMA_CHANNELS_H
-#define DMA_CHANNELS_H
-
-#define U300_DMA_MSL_TX_0 0
-#define U300_DMA_MSL_TX_1 1
-#define U300_DMA_MSL_TX_2 2
-#define U300_DMA_MSL_TX_3 3
-#define U300_DMA_MSL_TX_4 4
-#define U300_DMA_MSL_TX_5 5
-#define U300_DMA_MSL_TX_6 6
-#define U300_DMA_MSL_RX_0 7
-#define U300_DMA_MSL_RX_1 8
-#define U300_DMA_MSL_RX_2 9
-#define U300_DMA_MSL_RX_3 10
-#define U300_DMA_MSL_RX_4 11
-#define U300_DMA_MSL_RX_5 12
-#define U300_DMA_MSL_RX_6 13
-#define U300_DMA_MMCSD_RX_TX 14
-#define U300_DMA_MSPRO_TX 15
-#define U300_DMA_MSPRO_RX 16
-#define U300_DMA_UART0_TX 17
-#define U300_DMA_UART0_RX 18
-#define U300_DMA_APEX_TX 19
-#define U300_DMA_APEX_RX 20
-#define U300_DMA_PCM_I2S0_TX 21
-#define U300_DMA_PCM_I2S0_RX 22
-#define U300_DMA_PCM_I2S1_TX 23
-#define U300_DMA_PCM_I2S1_RX 24
-#define U300_DMA_XGAM_CDI 25
-#define U300_DMA_XGAM_PDI 26
-#define U300_DMA_SPI_TX 27
-#define U300_DMA_SPI_RX 28
-#define U300_DMA_GENERAL_PURPOSE_0 29
-#define U300_DMA_GENERAL_PURPOSE_1 30
-#define U300_DMA_GENERAL_PURPOSE_2 31
-#define U300_DMA_GENERAL_PURPOSE_3 32
-#define U300_DMA_GENERAL_PURPOSE_4 33
-#define U300_DMA_GENERAL_PURPOSE_5 34
-#define U300_DMA_GENERAL_PURPOSE_6 35
-#define U300_DMA_GENERAL_PURPOSE_7 36
-#define U300_DMA_GENERAL_PURPOSE_8 37
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_UART1_TX 38
-#define U300_DMA_UART1_RX 39
-#else
-#define U300_DMA_GENERAL_PURPOSE_9 38
-#define U300_DMA_GENERAL_PURPOSE_10 39
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_DEVICE_CHANNELS 32
-#else
-#define U300_DMA_DEVICE_CHANNELS 30
-#endif
-#define U300_DMA_CHANNELS 40
-
-
-#endif /* DMA_CHANNELS_H */
+++ /dev/null
-/*
- * Copyright (C) 2007-2011 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_U300_H
-#define __MACH_U300_GPIO_U300_H
-
-/**
- * enum u300_gpio_variant - the type of U300 GPIO employed
- */
-enum u300_gpio_variant {
- U300_GPIO_COH901335,
- U300_GPIO_COH901571_3_BS335,
- U300_GPIO_COH901571_3_BS365,
-};
-
-/**
- * struct u300_gpio_platform - U300 GPIO platform data
- * @variant: IP block variant
- * @ports: number of GPIO block ports
- * @gpio_base: first GPIO number for this block (use a free range)
- * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
- * @pinctrl_device: pin control device to spawn as child
- */
-struct u300_gpio_platform {
- enum u300_gpio_variant variant;
- u8 ports;
- int gpio_base;
- int gpio_irq_base;
- struct platform_device *pinctrl_device;
-};
-
-#endif /* __MACH_U300_GPIO_U300_H */
+++ /dev/null
-/* empty */
* arch/arm/mach-u300/include/mach/irqs.h
*
*
- * Copyright (C) 2006-2009 ST-Ericsson AB
+ * Copyright (C) 2006-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* IRQ channel definitions for the U300 platforms.
* Author: Linus Walleij <linus.walleij@stericsson.com>
#define IRQ_U300_XGAM_GAMCON 14
#define IRQ_U300_XGAM_CDI 15
#define IRQ_U300_XGAM_CDICON 16
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC 17
-#endif
#define IRQ_U300_XGAM_PDI 18
#define IRQ_U300_XGAM_PDICON 19
#define IRQ_U300_XGAM_GAMEACC 20
#define IRQ_U300_GPIO_PORT1 34
#define IRQ_U300_GPIO_PORT2 35
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
- defined(CONFIG_MACH_U300_BS335)
/* These are for DB3150, DB3200 and DB3350 */
#define IRQ_U300_WDOG 36
#define IRQ_U300_EVHIST 37
#define IRQ_U300_RTC 43
#define IRQ_U300_NFIF 44
#define IRQ_U300_NFIF2 45
-#endif
-
-/* DB3150 and DB3200 have only 45 IRQs */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END 46
-#endif
/* The DB3350-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS335
#define IRQ_U300_ISP_F0 46
#define IRQ_U300_ISP_F1 47
#define IRQ_U300_ISP_F2 48
#define IRQ_U300_GPIO_PORT5 55
#define IRQ_U300_GPIO_PORT6 56
#define U300_VIC_IRQS_END 57
-#endif
-
-/* The DB3210-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3 36
-#define IRQ_U300_GPIO_PORT4 37
-#define IRQ_U300_WDOG 38
-#define IRQ_U300_EVHIST 39
-#define IRQ_U300_MSPRO 40
-#define IRQ_U300_MMCSD_MCIINTR0 41
-#define IRQ_U300_MMCSD_MCIINTR1 42
-#define IRQ_U300_I2C0 43
-#define IRQ_U300_I2C1 44
-#define IRQ_U300_RTC 45
-#define IRQ_U300_NFIF 46
-#define IRQ_U300_NFIF2 47
-#define IRQ_U300_SYSCON_PLL_LOCK 48
-#define U300_VIC_IRQS_END 49
-#endif
/* Maximum 8*7 GPIO lines */
#ifdef CONFIG_PINCTRL_COH901
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
-#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
+#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
#endif
+++ /dev/null
-/*
- *
- * arch/arm/mach-u300/include/mach/platform.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic platform init and mapping functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __ASSEMBLY__
-
-void u300_map_io(void);
-void u300_init_irq(void);
-void u300_init_devices(void);
-void u300_restart(char, const char *);
-extern struct sys_timer u300_timer;
-
-#endif
* arch/arm/mach-u300/include/mach/syscon.h
*
*
- * Copyright (C) 2008 ST-Ericsson AB
+ * Copyright (C) 2008-2012 ST-Ericsson AB
*
* Author: Rickard Andersson <rickard.andersson@stericsson.com>
*/
#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
/* Reset lines for SLOW devices 16bit (R/W) */
#define U300_SYSCON_RSR (0x0014)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
-#endif
#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
/* Reset lines for FAST devices 16bit (R/W) */
#define U300_SYSCON_RFR (0x0018)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
-#endif
#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
/* Reset lines for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_RRR (0x001c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
-#endif
#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
/* Clock enable for SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CESR (0x0020)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
-#endif
#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
/* Clock enable for FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CEFR (0x0024)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
-#endif
#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
/* Clock enable for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CERR (0x0028)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
-#endif
#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
/* Single block clock enable 16bit (-/W) */
#define U300_SYSCON_SBCER (0x002c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
-#endif
#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
-#endif
#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
-#endif
#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
/* Same values as above for SBCER */
/* Clock force SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CFSR (0x003c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
-#endif
#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
/* Values not defined. Define if you want to use them. */
/* Clock force the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CFRR (0x44)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
-#endif
#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
#define PLAT_NAND_CLE (1 << 16)
#define PLAT_NAND_ALE (1 << 17)
-
/* AHB Peripherals */
#define U300_AHB_PER_PHYS_BASE 0xa0000000
#define U300_AHB_PER_VIRT_BASE 0xff010000
#define U300_BOOTROM_VIRT_BASE 0xffff0000
/* SEMI config base */
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SEMI_CONFIG_BASE 0x2FFE0000
-#else
-#define U300_SEMI_CONFIG_BASE 0x30000000
-#endif
/*
* AHB peripherals
/* SPI controller */
#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
-#ifdef CONFIG_MACH_U300_BS335
/* Fast UART1 on U335 only */
#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-#endif
/*
* SLOW peripherals
* REST peripherals
*/
-/* ISP (image signal processor) is only available in U335 */
-#ifdef CONFIG_MACH_U300_BS335
+/* ISP (image signal processor) */
#define U300_ISP_BASE (0xA0008000)
-#endif
/* DMA Controller base */
#define U300_DMAC_BASE (0xC0020000)
#define U300_APEX_BASE (0xc0030000)
/* Video Encoder Base */
-#ifdef CONFIG_MACH_U300_BS335
#define U300_VIDEOENC_BASE (0xc0080000)
-#else
-#define U300_VIDEOENC_BASE (0xc0040000)
-#endif
/* XGAM Base */
#define U300_XGAM_BASE (0xd0000000)
-/*
- * Virtual accessor macros for static devices
- */
-
#endif
#include <linux/amba/pl022.h>
#include <linux/err.h>
#include <mach/coh901318.h>
-#include <mach/dma_channels.h>
+#include "dma_channels.h"
/*
* The following is for the actual devices on the SSP/SPI bus
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
/* Generic stuff */
#include <asm/sched_clock.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
+
+#include "timer.h"
/*
* APP side special timer registers
--- /dev/null
+extern struct sys_timer u300_timer;
/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
+ * Individual pin assignments for the B335/S335.
* Notice that the actual usage of these pins depends on the
* PAD MUX settings, that is why the same number can potentially
* appear several times. In the reference design each pin is only
* used for one purpose. These were determined by inspecting the
* S365 schematic.
*/
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
#define U300_GPIO_PIN_UART_RX 0
#define U300_GPIO_PIN_UART_TX 1
#define U300_GPIO_PIN_UART_CTS 2
#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-#ifdef CONFIG_MACH_U300_BS335
-
#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
+++ /dev/null
-/*
- *
- * arch/arm/mach-u300/u300.c
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform machine definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/memblock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-
-static void __init u300_init_machine(void)
-{
- u300_init_devices();
-}
-
-#ifdef CONFIG_MACH_U300_BS2X
-#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS330
-#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
-#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
-#endif
-
-MACHINE_START(U300, MACH_U300_STRING)
- /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .atag_offset = 0x100,
- .map_io = u300_map_io,
- .init_irq = u300_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &u300_timer,
- .init_machine = u300_init_machine,
- .restart = u300_restart,
-MACHINE_END
select CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
+ select COMMON_CLK
config UX500_SOC_DB8500
bool
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o cpu.o devices.o devices-common.o \
+obj-y := cpu.o devices.o devices-common.o \
id.o usb.o timer.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
};
#endif
-#define PRCC_K_SOFTRST_SET 0x18
-#define PRCC_K_SOFTRST_CLEAR 0x1C
-static void ux500_uart0_reset(void)
-{
- void __iomem *prcc_rst_set, *prcc_rst_clr;
-
- prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_SET);
- prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_CLEAR);
-
- /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
- writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
- udelay(1);
-
- /* Release soft reset PRCC_K_SOFTRST_SET */
- writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
- udelay(1);
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .reset = ux500_uart0_reset,
};
static struct amba_pl011_data uart1_plat = {
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
{
u32 aux_val = 0x3e000000;
- if (cpu_is_u8500_family())
+ if (cpu_is_u8500_family() || cpu_is_ux540_family())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
+++ /dev/null
-/*
- * Copyright (C) 2009 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h> /* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN 0x00
-#define PRCC_PCKDIS 0x04
-#define PRCC_KCKEN 0x08
-#define PRCC_KCKDIS 0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET 0x510
-#define PRCM_YYCLKEN1_MGT_SET 0x514
-#define PRCM_YYCLKEN0_MGT_CLR 0x518
-#define PRCM_YYCLKEN1_MGT_CLR 0x51C
-#define PRCM_YYCLKEN0_MGT_VAL 0x520
-#define PRCM_YYCLKEN1_MGT_VAL 0x524
-
-#define PRCM_SVAMMDSPCLK_MGT 0x008
-#define PRCM_SIAMMDSPCLK_MGT 0x00C
-#define PRCM_SGACLK_MGT 0x014
-#define PRCM_UARTCLK_MGT 0x018
-#define PRCM_MSP02CLK_MGT 0x01C
-#define PRCM_MSP1CLK_MGT 0x288
-#define PRCM_I2CCLK_MGT 0x020
-#define PRCM_SDMMCCLK_MGT 0x024
-#define PRCM_SLIMCLK_MGT 0x028
-#define PRCM_PER1CLK_MGT 0x02C
-#define PRCM_PER2CLK_MGT 0x030
-#define PRCM_PER3CLK_MGT 0x034
-#define PRCM_PER5CLK_MGT 0x038
-#define PRCM_PER6CLK_MGT 0x03C
-#define PRCM_PER7CLK_MGT 0x040
-#define PRCM_LCDCLK_MGT 0x044
-#define PRCM_BMLCLK_MGT 0x04C
-#define PRCM_HSITXCLK_MGT 0x050
-#define PRCM_HSIRXCLK_MGT 0x054
-#define PRCM_HDMICLK_MGT 0x058
-#define PRCM_APEATCLK_MGT 0x05C
-#define PRCM_APETRACECLK_MGT 0x060
-#define PRCM_MCDECLK_MGT 0x064
-#define PRCM_IPI2CCLK_MGT 0x068
-#define PRCM_DSIALTCLK_MGT 0x06C
-#define PRCM_DMACLK_MGT 0x074
-#define PRCM_B2R2CLK_MGT 0x078
-#define PRCM_TVCLK_MGT 0x07C
-#define PRCM_TCR 0x1C8
-#define PRCM_TCR_STOPPED (1 << 16)
-#define PRCM_TCR_DOZE_MODE (1 << 17)
-#define PRCM_UNIPROCLK_MGT 0x278
-#define PRCM_SSPCLK_MGT 0x280
-#define PRCM_RNGCLK_MGT 0x284
-#define PRCM_UICCCLK_MGT 0x27C
-
-#define PRCM_MGT_ENABLE (1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
- if (clk->enabled++ == 0) {
- if (clk->parent_cluster)
- __clk_enable(clk->parent_cluster);
-
- if (clk->parent_periph)
- __clk_enable(clk->parent_periph);
-
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- }
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
- if (--clk->enabled == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- if (clk->parent_periph)
- __clk_disable(clk->parent_periph);
-
- if (clk->parent_cluster)
- __clk_disable(clk->parent_cluster);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(!clk->enabled);
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
- void __iomem *addr;
- u32 tcr;
- int mtu = (int) clk->data;
- /*
- * One of these is selected eventually
- * TODO: Replace the constant with a reference
- * to the ULP source once this is modeled.
- */
- unsigned long clk32k = 32768;
- unsigned long mturate;
- unsigned long retclk;
-
- if (cpu_is_u8500_family())
- addr = __io_address(U8500_PRCMU_BASE);
- else
- ux500_unknown_soc();
-
- /*
- * On a startup, always conifgure the TCR to the doze mode;
- * bootloaders do it for us. Do this in the kernel too.
- */
- writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
- tcr = readl(addr + PRCM_TCR);
-
- /* Get the rate from the parent as a default */
- if (clk->parent_periph)
- mturate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- mturate = clk_get_rate(clk->parent_cluster);
- else
- /* We need to be connected SOMEWHERE */
- BUG();
-
- /* Return the clock selected for this MTU */
- if (tcr & (1 << mtu))
- retclk = clk32k;
- else
- retclk = mturate;
-
- pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
- return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- /*
- * If there is a custom getrate callback for this clock,
- * it will take precedence.
- */
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- rate = clk->rate;
- if (!rate) {
- if (clk->parent_periph)
- rate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- rate = clk_get_rate(clk->parent_cluster);
- }
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- /*TODO*/
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- /*TODO*/
- return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
- void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
- void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
- .enable = clk_prcmu_enable,
- .disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
- [1] = U8500_CLKRST1_BASE,
- [2] = U8500_CLKRST2_BASE,
- [3] = U8500_CLKRST3_BASE,
- [5] = U8500_CLKRST5_BASE,
- [6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
- .enable = clk_prcc_enable,
- .disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
- .name = "clk_32khz",
- .rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
-static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL);
-static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
- .name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
- CLK(dummy_apb_pclk, NULL, "apb_pclk"),
-
- /* Peripheral Cluster #1 */
- CLK(gpio0, "gpio.0", NULL),
- CLK(gpio0, "gpio.1", NULL),
- CLK(slimbus0, "slimbus0", NULL),
- CLK(i2c2, "nmk-i2c.2", NULL),
- CLK(sdi0, "sdi0", NULL),
- CLK(msp0, "ux500-msp-i2s.0", NULL),
- CLK(i2c1, "nmk-i2c.1", NULL),
- CLK(uart1, "uart1", NULL),
- CLK(uart0, "uart0", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(gpio2, "gpio.2", NULL),
- CLK(gpio2, "gpio.3", NULL),
- CLK(gpio2, "gpio.4", NULL),
- CLK(gpio2, "gpio.5", NULL),
- CLK(sdi5, "sdi5", NULL),
- CLK(uart2, "uart2", NULL),
- CLK(ske, "ske", NULL),
- CLK(ske, "nmk-ske-keypad", NULL),
- CLK(sdi2, "sdi2", NULL),
- CLK(i2c0, "nmk-i2c.0", NULL),
- CLK(fsmc, "fsmc", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(gpio3, "gpio.8", NULL),
-
- /* Peripheral Cluster #6 */
- CLK(hash1, "hash1", NULL),
- CLK(pka, "pka", NULL),
- CLK(hash0, "hash0", NULL),
- CLK(cryp0, "cryp0", NULL),
- CLK(cryp1, "cryp1", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(svaclk, "sva", NULL),
- CLK(siaclk, "sia", NULL),
- CLK(sgaclk, "sga", NULL),
- CLK(slimclk, "slim", NULL),
- CLK(lcdclk, "lcd", NULL),
- CLK(bmlclk, "bml", NULL),
- CLK(hsitxclk, "stm-hsi.0", NULL),
- CLK(hsirxclk, "stm-hsi.1", NULL),
- CLK(hdmiclk, "hdmi", NULL),
- CLK(apeatclk, "apeat", NULL),
- CLK(apetraceclk, "apetrace", NULL),
- CLK(mcdeclk, "mcde", NULL),
- CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40.0", NULL),
- CLK(b2r2clk, "b2r2", NULL),
- CLK(tvclk, "tv", NULL),
-
- /* Peripheral Cluster #1 */
- CLK(i2c4, "nmk-i2c.4", NULL),
- CLK(spi3, "spi3", NULL),
- CLK(msp1, "ux500-msp-i2s.1", NULL),
- CLK(msp3, "ux500-msp-i2s.3", NULL),
-
- /* Peripheral Cluster #2 */
- CLK(gpio1, "gpio.6", NULL),
- CLK(gpio1, "gpio.7", NULL),
- CLK(ssitx, "ssitx", NULL),
- CLK(ssirx, "ssirx", NULL),
- CLK(spi0, "spi0", NULL),
- CLK(sdi3, "sdi3", NULL),
- CLK(sdi1, "sdi1", NULL),
- CLK(msp2, "ux500-msp-i2s.2", NULL),
- CLK(sdi4, "sdi4", NULL),
- CLK(pwl, "pwl", NULL),
- CLK(spi1, "spi1", NULL),
- CLK(spi2, "spi2", NULL),
- CLK(i2c3, "nmk-i2c.3", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(ssp1, "ssp1", NULL),
- CLK(ssp0, "ssp0", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(usb, "musb-ux500.0", "usb"),
-
- /* Peripheral Cluster #6 */
- CLK(mtu1, "mtu1", NULL),
- CLK(mtu0, "mtu0", NULL),
- CLK(cfgreg, "cfgreg", NULL),
- CLK(hash1, "hash1", NULL),
- CLK(unipro, "unipro", NULL),
- CLK(rng, "rng", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(uniproclk, "uniproclk", NULL),
- CLK(dsialtclk, "dsialt", NULL),
-
- /* Bank 1 */
- CLK(rngclk, "rng", NULL),
- CLK(uiccclk, "uicc", NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes with
- * powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
- while (num--) {
- /* Check that the clock has not been already registered */
- if (!(cl->clk->list.prev != cl->clk->list.next))
- list_add_tail(&cl->clk->list, &clk_list);
-
- cl++;
- }
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char cusecount[128];
- unsigned int len;
-
- len = sprintf(cusecount, "%u\n", clk->enabled);
- return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char crate[128];
- unsigned int rate;
- unsigned int len;
-
- rate = clk_get_rate(clk);
- len = sprintf(crate, "%u\n", rate);
- return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
- .read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
- .read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
- struct dentry *p_dentry)
-{
- struct dentry *d, *clk_d;
- const char *p = c->name;
-
- if (!p)
- p = "BUG";
-
- clk_d = debugfs_create_dir(p, p_dentry);
- if (!clk_d)
- return NULL;
-
- d = debugfs_create_file("usecount", S_IRUGO,
- clk_d, c, &usecount_fops);
- if (!d)
- goto err_out;
- d = debugfs_create_file("rate", S_IRUGO,
- clk_d, c, &set_rate_fops);
- if (!d)
- goto err_out;
- /*
- * TODO : not currently available in ux500
- * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
- * if (!d)
- * goto err_out;
- */
-
- return clk_d;
-
-err_out:
- debugfs_remove_recursive(clk_d);
- return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (!(bpa && !pa)) {
- c->dent = clk_debugfs_register_dir(c,
- pa ? pa->dent : clk_debugfs_root);
- if (!c->dent)
- return -ENOMEM;
- }
-
- if (bpa) {
- c->dent_bus = clk_debugfs_register_dir(c,
- bpa->dent_bus ? bpa->dent_bus : bpa->dent);
- if ((!c->dent_bus) && (c->dent)) {
- debugfs_remove_recursive(c->dent);
- c->dent = NULL;
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (pa && (!pa->dent && !pa->dent_bus)) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (bpa && (!bpa->dent && !bpa->dent_bus)) {
- err = clk_debugfs_register(bpa);
- if (err)
- return err;
- }
-
- if ((!c->dent) && (!c->dent_bus)) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clk_list, list) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
- return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
- .get_rate = clk_smp_twd_get_rate,
- .name = "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
- .dev_id = "smp_twd",
- .clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
- unsigned long state, void *data)
-{
- struct cpufreq_freqs *f = data;
-
- if (state == CPUFREQ_PRECHANGE) {
- /* Save frequency in simple Hz */
- clk_smp_twd_rate = (f->new * 1000) / 2;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
- .notifier_call = clk_twd_cpufreq_transition,
-};
-
-int clk_init_smp_twd_cpufreq(void)
-{
- return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#endif
-
-int __init clk_init(void)
-{
- clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
- clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable: function to enable the clock
- * @disable: function to disable the clock
- * @get_rate: function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock. All of these functions are optional. If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
- void (*enable) (struct clk *);
- void (*disable) (struct clk *);
- unsigned long (*get_rate) (struct clk *);
- int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops: pointer to clkops struct used to control this clock
- * @name: name, for debugging
- * @enabled: refcount. positive if enabled, zero if disabled
- * @get_rate: custom callback for getting the clock rate
- * @data: custom per-clock data for example for the get_rate
- * callback
- * @rate: fixed rate for clocks which don't implement
- * ops->getrate
- * @prcmu_cg_off: address offset of the combined enable/disable register
- * (used on u8500v1)
- * @prcmu_cg_bit: bit in the combined enable/disable register (used on
- * u8500v1)
- * @prcmu_cg_mgt: address of the enable/disable register (used on
- * u8500ed)
- * @cluster: peripheral cluster number
- * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
- * -1 if no kernel clock exists.
- * @parent_cluster: pointer to parent's cluster clk struct
- * @parent_periph: pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock. Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * (1) the parent cluster (bus) clock at the PRCMU level
- * (2) the parent peripheral clock (if any) at the PRCMU level
- * (3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
- const struct clkops *ops;
- const char *name;
- unsigned int enabled;
- unsigned long (*get_rate)(struct clk *);
- void *data;
-
- unsigned long rate;
- struct list_head list;
-
- /* These three are only for PRCMU clks */
-
- unsigned int prcmu_cg_off;
- unsigned int prcmu_cg_bit;
- unsigned int prcmu_cg_mgt;
-
- /* The rest are only for PRCC clks */
-
- int cluster;
- unsigned int prcc_bus;
- unsigned int prcc_kernel;
-
- struct clk *parent_cluster;
- struct clk *parent_periph;
-#if defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
- struct dentry *dent_bus; /* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .rate = _rate, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk \
- }
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk, \
- .get_rate = _callback, \
- .data = (void *) _data \
- }
-
-
-#define CLK(_clk, _devname, _conname) \
- { \
- .clk = &clk_##_clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
#include <linux/mfd/abx500/ab8500.h>
#include <asm/mach/map.h>
-#include <asm/pmu.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
- if (cpu_is_u9540())
+ if (cpu_is_ux540_family())
iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
else
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
static struct platform_device db8500_pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(db8500_pmu_resources),
.resource = db8500_pmu_resources,
.dev.platform_data = &db8500_pmu_platdata,
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include "clock.h"
-
void __iomem *_PRCMU_BASE;
/*
void __iomem *dist_base;
void __iomem *cpu_base;
- if (cpu_is_u8500_family()) {
+ if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
*/
if (cpu_is_u8500_family())
db8500_prcmu_early_init();
- clk_init();
+
+ if (cpu_is_u8500_family())
+ u8500_clk_init();
+ else if (cpu_is_u9540())
+ u9540_clk_init();
+ else if (cpu_is_u8540())
+ u8540_clk_init();
}
void __init ux500_init_late(void)
{
- clk_debugfs_init();
- clk_init_smp_twd_cpufreq();
}
static const char * __init ux500_get_machine(void)
#include <linux/sys_soc.h>
#include <linux/amba/bus.h>
#include <linux/platform_data/i2c-nomadik.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
struct spi_master_cntlr;
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include <mach/setup.h>
-static inline void platform_do_lowpower(unsigned int cpu)
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ux500_cpu_die(unsigned int cpu)
{
flush_cache_all();
- /* we put the platform to just WFI */
+ /* directly enter low power state, skipping secure registers */
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
}
}
}
-
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
- /* directly enter low power state, skipping secure registers */
- platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef _CRYPTO_UX500_H
-#define _CRYPTO_UX500_H
-#include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
-
-struct hash_platform_data {
- void *mem_to_engine;
- bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-struct cryp_platform_data {
- struct stedma40_chan_cfg mem_to_engine;
- struct stedma40_chan_cfg engine_to_mem;
-};
-
-#endif
+++ /dev/null
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
return dbx500_partnumber() == 0x8500;
}
-static inline bool __attribute_const__ cpu_is_u9540(void)
+static inline bool __attribute_const__ cpu_is_u8520(void)
{
- return dbx500_partnumber() == 0x9540;
+ return dbx500_partnumber() == 0x8520;
}
static inline bool cpu_is_u8500_family(void)
{
- return cpu_is_u8500() || cpu_is_u9540();
-}
-
-static inline bool __attribute_const__ cpu_is_u5500(void)
-{
- return dbx500_partnumber() == 0x5500;
-}
-
-/*
- * 5500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u5500v1(void)
-{
- return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
+ return cpu_is_u8500() || cpu_is_u8520();
}
-static inline bool __attribute_const__ cpu_is_u5500v2(void)
+static inline bool __attribute_const__ cpu_is_u9540(void)
{
- return (dbx500_id.revision & 0xf0) == 0xB0;
+ return dbx500_partnumber() == 0x9540;
}
-static inline bool __attribute_const__ cpu_is_u5500v20(void)
+static inline bool __attribute_const__ cpu_is_u8540(void)
{
- return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
+ return dbx500_partnumber() == 0x8540;
}
-static inline bool __attribute_const__ cpu_is_u5500v21(void)
+static inline bool cpu_is_ux540_family(void)
{
- return cpu_is_u5500() && (dbx500_revision() == 0xB1);
+ return cpu_is_u9540() || cpu_is_u8540();
}
/*
return cpu_is_u8500() && (dbx500_revision() == 0xB1);
}
+static inline bool cpu_is_u8500v22(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() == 0xB2);
+}
+
static inline bool cpu_is_u8500v20_or_later(void)
{
- /*
- * U9540 has so much in common with U8500 that is is considered a
- * U8500 variant.
- */
- return cpu_is_u9540() ||
- (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
+ return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
}
static inline bool ux500_is_svp(void)
.type = MT_MEMORY, \
}
+extern struct smp_operations ux500_smp_ops;
+extern void ux500_cpu_die(unsigned int cpu);
+
#endif /* __ASM_ARCH_SETUP_H */
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-#include <linux/dmaengine.h>
-
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
-
-struct ux500_musb_board_data {
- void **dma_rx_param_array;
- void **dma_tx_param_array;
- u32 num_rx_channels;
- u32 num_tx_channels;
- bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-void ux500_add_usb(struct device *parent, resource_size_t base,
- int irq, int *dma_rx_cfg, int *dma_tx_cfg);
-#endif
/* This is called from headsmp.S to wakeup the secondary core */
extern void u8500_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static void __iomem *scu_base_addr(void)
{
- if (cpu_is_u8500_family())
+ if (cpu_is_u8500_family() || cpu_is_ux540_family())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
{
void __iomem *backupram;
- if (cpu_is_u8500_family())
+ if (cpu_is_u8500_family() || cpu_is_ux540_family())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
wakeup_secondary();
}
+
+struct smp_operations ux500_smp_ops __initdata = {
+ .smp_init_cpus = ux500_smp_init_cpus,
+ .smp_prepare_cpus = ux500_smp_prepare_cpus,
+ .smp_secondary_init = ux500_secondary_init,
+ .smp_boot_secondary = ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = ux500_cpu_die,
+#endif
+};
void __iomem *tmp_base;
struct device_node *np;
- if (cpu_is_u8500_family()) {
+ if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
mtu_timer_base = __io_address(U8500_MTU0_BASE);
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
} else {
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- }, {
- .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = IO_SPACE_LIMIT,
- .type = MT_DEVICE
},
#endif
};
+++ /dev/null
-/* empty */
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
-#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+++ /dev/null
-/*
- * arch/arm/mach-versatile/include/mach/io.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define PCIO_BASE 0xeb000000ul
-
-#define __io(a) ((a) + PCIO_BASE)
-
-#endif
.write = versatile_write_config,
};
-static struct resource io_port = {
- .name = "PCI",
- .start = 0,
- .end = IO_SPACE_LIMIT,
- .flags = IORESOURCE_IO,
-};
-
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
"memory region (%d)\n", ret);
goto out;
}
- ret = request_resource(&ioport_resource, &io_port);
- if (ret) {
- printk(KERN_ERR "PCI: unable to allocate I/O "
- "port region (%d)\n", ret);
- goto out;
- }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
}
/*
- * the IO resource for this bus
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
goto out;
}
+ ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+ if (ret)
+ goto out;
+
if (nr == 0) {
- sys->mem_offset = 0;
- sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
void __init pci_versatile_preinit(void)
{
- pcibios_min_io = 0x44000000;
pcibios_min_mem = 0x50000000;
__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
- bool "Enable A5 and A9 only errata work-arounds"
- default y
- select ARM_ERRATA_720789
- select ARM_ERRATA_751472
- select PL310_ERRATA_753970 if CACHE_PL310
- help
- Provides common dependencies for Versatile Express platforms
- based on Cortex-A5 and Cortex-A9 processors. In order to
- build a working kernel, you must also enable relevant core
- tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_CA9X4
- bool "Versatile Express Cortex-A9x4 tile"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_VEXPRESS_DT
- bool "Device Tree support for Versatile Express platforms"
+config ARCH_VEXPRESS
+ bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
select ARM_GIC
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_PATA_PLATFORM
select HAVE_SMP
+ select ICST
select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
+ select NO_IOPORT
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- New Versatile Express platforms require Flattened Device Tree to
- be passed to the kernel.
-
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
for example:
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
- If your bootloader supports Flattened Device Tree based booting,
- say Y here.
+menu "Versatile Express platform type"
+ depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ bool "Enable A5 and A9 only errata work-arounds"
+ default y
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_751472
+ select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Provides common dependencies for Versatile Express platforms
+ based on Cortex-A5 and Cortex-A9 processors. In order to
+ build a working kernel, you must also enable relevant core
+ tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_CA9X4
+ bool "Versatile Express Cortex-A9x4 tile"
endmenu
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ -I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
+++ /dev/null
-# Those numbers are used only by the non-DT V2P-CA9 platform
-# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
- zreladdr-y += 0x60008000
-params_phys-y := 0x60000100
-initrd_phys-y := 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
- vexpress-v2p-ca9.dtb \
- vexpress-v2p-ca15-tc1.dtb \
- vexpress-v2p-ca15_a7.dtb
#define V2T_PERIPH 0xf8200000
void vexpress_dt_smp_map_io(void);
+
+extern struct smp_operations vexpress_smp_ops;
+
+extern void vexpress_cpu_die(unsigned int cpu);
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
-#include <asm/pmu.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include "core.h"
#include <mach/motherboard.h>
+#include <mach/irqs.h>
#include <plat/clcd.h>
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
#include <asm/smp_plat.h>
#include <asm/cp15.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref vexpress_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/* arch/arm/mach-realview/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define DEBUG_LL_PHYS_BASE 0x10000000
-#define DEBUG_LL_UART_OFFSET 0x00009000
-
-#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
-#define DEBUG_LL_UART_OFFSET_RS1 0x00090000
-
-#define DEBUG_LL_VIRT_BASE 0xf8000000
-
-#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
-
- .macro addruart,rp,rv,tmp
-
- @ Make an educated guess regarding the memory map:
- @ - the original A9 core tile, which has MPCore peripherals
- @ located at 0x1e000000, should use UART at 0x10009000
- @ - all other (RS1 complaint) tiles use UART mapped
- @ at 0x1c090000
- mrc p15, 4, \tmp, c15, c0, 0
- cmp \tmp, #0x1e000000
-
- @ Original memory map
- moveq \rp, #DEBUG_LL_UART_OFFSET
- orreq \rv, \rp, #DEBUG_LL_VIRT_BASE
- orreq \rp, \rp, #DEBUG_LL_PHYS_BASE
-
- @ RS1 memory map
- movne \rp, #DEBUG_LL_UART_OFFSET_RS1
- orrne \rv, \rp, #DEBUG_LL_VIRT_BASE
- orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
-
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
-
- .macro addruart,rp,rv,tmp
- mov \rp, #DEBUG_LL_UART_OFFSET
- orr \rv, \rp, #DEBUG_LL_VIRT_BASE
- orr \rp, \rp, #DEBUG_LL_PHYS_BASE
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
-
- .macro addruart,rp,rv,tmp
- mov \rp, #DEBUG_LL_UART_OFFSET_RS1
- orr \rv, \rp, #DEBUG_LL_VIRT_BASE
- orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#else /* CONFIG_DEBUG_LL_UART_NONE */
-
- .macro addruart, rp, rv, tmp
- /* Safe dummy values */
- mov \rp, #0
- mov \rv, #DEBUG_LL_VIRT_BASE
- .endm
-
- .macro senduart,rd,rx
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
- .endm
-
-#endif
+++ /dev/null
-/* empty */
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
+#ifndef CONFIG_SPARSE_IRQ
#define NR_IRQS 256
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-vexpress/include/mach/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
+++ /dev/null
-/*
- * arch/arm/mach-vexpress/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-
-#define UART_BASE 0x10009000
-#define UART_BASE_RS1 0x1c090000
-
-static unsigned long get_uart_base(void)
-{
-#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
- unsigned long mpcore_periph;
-
- /*
- * Make an educated guess regarding the memory map:
- * - the original A9 core tile, which has MPCore peripherals
- * located at 0x1e000000, should use UART at 0x10009000
- * - all other (RS1 complaint) tiles use UART mapped
- * at 0x1c090000
- */
- asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
-
- if (mpcore_periph == 0x1e000000)
- return UART_BASE;
- else
- return UART_BASE_RS1;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
- return UART_BASE;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
- return UART_BASE_RS1;
-#else
- return 0;
-#endif
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 5))
- barrier();
-
- AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
#include <mach/motherboard.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
#if defined(CONFIG_OF)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init vexpress_smp_init_cpus(void)
{
if (ct_desc)
ct_desc->init_cpu_map();
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
{
/*
* Initialise the present map, which describes the set of CPUs
*/
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
+
+struct smp_operations __initdata vexpress_smp_ops = {
+ .smp_init_cpus = vexpress_smp_init_cpus,
+ .smp_prepare_cpus = vexpress_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = vexpress_cpu_die,
+#endif
+};
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/smp.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <mach/motherboard.h>
#include <plat/sched_clock.h>
+#include <plat/platsmp.h>
#include "core.h"
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.atag_offset = 0x100,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
.restart = v2m_restart,
MACHINE_END
-#if defined(CONFIG_ARCH_VEXPRESS_DT)
-
static struct map_desc v2m_rs1_io_desc __initdata = {
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(0x1c000000),
DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
.init_irq = v2m_dt_init_irq,
.handle_irq = gic_handle_irq,
.restart = v2m_restart,
MACHINE_END
-
-#endif
#include <asm/mach/arch.h>
-#include <mach/vt8500fb.h>
+#include <linux/platform_data/video-vt8500lcdfb.h>
#include <mach/i8042.h>
#include "devices.h"
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * VT8500/WM8505 Frame Buffer platform data definitions
- *
- * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
- struct fb_videomode mode;
- u32 xres_virtual;
- u32 yres_virtual;
- u32 bpp;
- unsigned long video_mem_phys;
- void *video_mem_virt;
- unsigned long video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
#include "cpu.h"
+++ /dev/null
-/* linux/include/asm/arch-nuc900/fb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Changelog:
- *
- * 2008/08/26 vincen.zswan modify this file for LCD.
- */
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-
-
-/* LCD Controller Hardware Desc */
-struct nuc900fb_hw {
- unsigned int lcd_dccs;
- unsigned int lcd_device_ctrl;
- unsigned int lcd_mpulcd_cmd;
- unsigned int lcd_int_cs;
- unsigned int lcd_crtc_size;
- unsigned int lcd_crtc_dend;
- unsigned int lcd_crtc_hr;
- unsigned int lcd_crtc_hsync;
- unsigned int lcd_crtc_vr;
- unsigned int lcd_va_baddr0;
- unsigned int lcd_va_baddr1;
- unsigned int lcd_va_fbctrl;
- unsigned int lcd_va_scale;
- unsigned int lcd_va_test;
- unsigned int lcd_va_win;
- unsigned int lcd_va_stuff;
-};
-
-/* LCD Display Description */
-struct nuc900fb_display {
- /* LCD Image type */
- unsigned type;
-
- /* LCD Screen Size */
- unsigned short width;
- unsigned short height;
-
- /* LCD Screen Info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned long pixclock;
- unsigned short left_margin;
- unsigned short right_margin;
- unsigned short hsync_len;
- unsigned short upper_margin;
- unsigned short lower_margin;
- unsigned short vsync_len;
-
- /* hardware special register value */
- unsigned int dccs;
- unsigned int devctl;
- unsigned int fbctrl;
- unsigned int scale;
-};
-
-struct nuc900fb_mach_info {
- struct nuc900fb_display *displays;
- unsigned num_displays;
- unsigned default_display;
- /* GPIO Setting Info */
- unsigned gpio_dir;
- unsigned gpio_dir_mask;
- unsigned gpio_data;
- unsigned gpio_data_mask;
-};
-
-extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
+++ /dev/null
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
- int bus_num;
- unsigned long bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */
+++ /dev/null
-/*
- * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H
-
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-
-struct nuc900_spi_info {
- unsigned int num_cs;
- unsigned int lsb;
- unsigned int txneg;
- unsigned int rxneg;
- unsigned int divider;
- unsigned int sleep;
- unsigned int txnum;
- unsigned int txbitlen;
- int bus_num;
-};
-
-struct nuc900_spi_chip {
- unsigned char bits_per_word;
-};
-
-#endif /* __ASM_ARCH_SPI_H */
+++ /dev/null
-#ifndef __ASM_ARCH_W90P910_KEYPAD_H
-#define __ASM_ARCH_W90P910_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-extern void mfp_set_groupi(struct device *dev);
-
-struct w90p910_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
-
- unsigned int prescale;
- unsigned int debounce;
-};
-
-#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include "nuc950.h"
*/
#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/cputype.h>
#include <asm/hardware/cache-tauros2.h>
__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
}
-static void __init disable_l2_prefetch(void)
-{
- u32 u;
-
- /*
- * Read the CPU Extra Features register and verify that the
- * Disable L2 Prefetch bit is set.
- */
- u = read_extra_features();
- if (!(u & 0x01000000)) {
- printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
- write_extra_features(u | 0x01000000);
- }
-}
-
static inline int __init cpuid_scheme(void)
{
- extern int processor_id;
-
return !!((processor_id & 0x000f0000) == 0x000f0000);
}
__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
}
-void __init tauros2_init(void)
+static void enable_extra_feature(unsigned int features)
+{
+ u32 u;
+
+ u = read_extra_features();
+
+ if (features & CACHE_TAUROS2_PREFETCH_ON)
+ u &= ~0x01000000;
+ else
+ u |= 0x01000000;
+ printk(KERN_INFO "Tauros2: %s L2 prefetch.\n",
+ (features & CACHE_TAUROS2_PREFETCH_ON)
+ ? "Enabling" : "Disabling");
+
+ if (features & CACHE_TAUROS2_LINEFILL_BURST8)
+ u |= 0x00100000;
+ else
+ u &= ~0x00100000;
+ printk(KERN_INFO "Tauros2: %s line fill burt8.\n",
+ (features & CACHE_TAUROS2_LINEFILL_BURST8)
+ ? "Enabling" : "Disabling");
+
+ write_extra_features(u);
+}
+
+static void __init tauros2_internal_init(unsigned int features)
{
- extern int processor_id;
- char *mode;
+ char *mode = NULL;
- disable_l2_prefetch();
+ enable_extra_feature(features);
#ifdef CONFIG_CPU_32v5
if ((processor_id & 0xff0f0000) == 0x56050000) {
printk(KERN_INFO "Tauros2: L2 cache support initialised "
"in %s mode.\n", mode);
}
+
+#ifdef CONFIG_OF
+static const struct of_device_id tauros2_ids[] __initconst = {
+ { .compatible = "marvell,tauros2-cache"},
+ {}
+};
+#endif
+
+void __init tauros2_init(unsigned int features)
+{
+#ifdef CONFIG_OF
+ struct device_node *node;
+ int ret;
+ unsigned int f;
+
+ node = of_find_matching_node(NULL, tauros2_ids);
+ if (!node) {
+ pr_info("Not found marvell,tauros2-cache, disable it\n");
+ return;
+ }
+
+ ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+ if (ret) {
+ pr_info("Not found marvell,tauros-cache-features property, "
+ "disable extra features\n");
+ features = 0;
+ } else
+ features = f;
+#endif
+ tauros2_internal_init(features);
+}
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
- " bfi %1, %0, #0, %2\n"
- " mcr p15, 0, %1, c13, c0, 1\n"
+ " and %0, %0, %2\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
- : "I" (ASID_BITS));
+ : "I" (~ASID_MASK));
isb();
return NOTIFY_OK;
void *pool_start = pool->vaddr;
void *pool_end = pool->vaddr + pool->size;
- if (start < pool_start || start > pool_end)
+ if (start < pool_start || start >= pool_end)
return false;
if (end <= pool_end)
#include <asm/system_info.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "mm.h"
int ioremap_page(unsigned long virt, unsigned long phys,
arch_iounmap(io_addr);
}
EXPORT_SYMBOL(__arm_iounmap);
+
+#ifdef CONFIG_PCI
+int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+{
+ BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+
+ return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
+ PCI_IO_VIRT_BASE + offset + SZ_64K,
+ phys_addr,
+ __pgprot(get_mem_type(MT_DEVICE)->prot_pte));
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_io);
+#endif
/* permanent static mappings from iotable_init() */
#define VM_ARM_STATIC_MAPPING 0x40000000
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING 0x20000000
+
/* mapping type (attributes) for permanent static mappings */
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "mm.h"
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB,
.domain = DOMAIN_IO,
- },
+ },
[MT_DEVICE_WC] = { /* ioremap_wc */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
.prot_l1 = PMD_TYPE_TABLE,
create_mapping(md);
vm->addr = (void *)(md->virtual & PAGE_MASK);
vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
- vm->phys_addr = __pfn_to_phys(md->pfn);
- vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->phys_addr = __pfn_to_phys(md->pfn);
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
vm->flags |= VM_ARM_MTYPE(md->type);
vm->caller = iotable_init;
vm_area_add_early(vm++);
}
}
+void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
+ void *caller)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = size;
+ vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
+ vm->caller = caller;
+ vm_area_add_early(vm);
+}
+
#ifndef CONFIG_ARM_LPAE
/*
static void __init pmd_empty_section_gap(unsigned long addr)
{
- struct vm_struct *vm;
-
- vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
- vm->addr = (void *)addr;
- vm->size = SECTION_SIZE;
- vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
- vm->caller = pmd_empty_section_gap;
- vm_area_add_early(vm);
+ vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap);
}
static void __init fill_pmd_gaps(void)
/* we're still single threaded hence no lock needed here */
for (vm = vmlist; vm; vm = vm->next) {
- if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
continue;
addr = (unsigned long)vm->addr;
if (addr < next)
#define fill_pmd_gaps() do { } while (0)
#endif
+#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
+static void __init pci_reserve_io(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ addr &= ~(SZ_2M - 1);
+ if (addr == PCI_IO_VIRT_BASE)
+ return;
+
+ }
+ vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
+}
+#else
+#define pci_reserve_io() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
- if (__va(bank->start + bank->size) > vmalloc_min ||
- __va(bank->start + bank->size) < __va(bank->start)) {
+ if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+ __va(bank->start + bank->size - 1) <= __va(bank->start)) {
unsigned long newsize = vmalloc_min - __va(bank->start);
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",
mdesc->map_io();
fill_pmd_gaps();
+ /* Reserve fixed i/o space in VMALLOC region */
+ pci_reserve_io();
+
/*
* Finally flush the caches and tlb to ensure that we're in a
* consistent state wrt the writebuffer. This also ensures that
if (nr != 0)
return 0;
- res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- res[0].start = IOP3XX_PCI_LOWER_IO_PA;
- res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
- res[0].name = "IOP3XX PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
- request_resource(&ioport_resource, &res[0]);
-
- res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
- res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
- res[1].name = "IOP3XX PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
- request_resource(&iomem_resource, &res[1]);
+ res->start = IOP3XX_PCI_LOWER_MEM_PA;
+ res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+ res->name = "IOP3XX PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, res);
/*
* Use whatever translation is already setup.
*/
sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
- sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+ pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
return 1;
}
void __init iop3xx_pci_preinit(void)
{
- pcibios_min_io = 0;
pcibios_min_mem = 0;
iop3xx_atu_disable();
*/
#include <linux/platform_device.h>
-#include <asm/pmu.h>
#include <mach/irqs.h>
static struct resource pmu_resource = {
static struct platform_device pmu_device = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.resource = &pmu_resource,
.num_resources = 1,
};
.pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
.length = IOP3XX_PERIPHERAL_SIZE,
.type = MT_UNCACHED,
- }, { /* PCI IO space */
- .virtual = IOP3XX_PCI_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
- .length = IOP3XX_PCI_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
},
};
#
# Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := time.o devices.o cpu.o system.o irq-common.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
+++ /dev/null
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-#ifndef CONFIG_COMMON_CLK
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
- WARN_ON(!clk->usecount);
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- __clk_disable(clk->parent);
- __clk_disable(clk->secondary);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (clk->usecount++ == 0) {
- __clk_enable(clk->parent);
- __clk_enable(clk->secondary);
-
- if (clk->enable)
- clk->enable(clk);
- }
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- struct clk *old;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL ||
- IS_ERR(parent) || clk->set_parent == NULL)
- return ret;
-
- if (clk->usecount)
- clk_enable(parent);
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_parent(clk, parent);
- if (ret == 0) {
- old = clk->parent;
- clk->parent = parent;
- } else {
- old = parent;
- }
- mutex_unlock(&clocks_mutex);
-
- if (clk->usecount)
- clk_disable(old);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- struct clk *ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#else
-
-/*
- * Lock to protect the clock module (ccm) registers. Used
- * on all i.MXs
- */
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-#endif /* CONFIG_COMMON_CLK */
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- * mfi + mfn / (mfd + 1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
- long long ll;
- int mfn_abs;
- unsigned int mfi, mfn, mfd, pd;
-
- mfi = (reg_val >> 10) & 0xf;
- mfn = reg_val & 0x3ff;
- mfd = (reg_val >> 16) & 0x3ff;
- pd = (reg_val >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- mfn_abs = mfn;
-
- /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
- * 2's complements number
- */
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- mfn_abs = 0x400 - mfn;
-
- freq *= 2;
- freq /= pd + 1;
-
- ll = (unsigned long long)freq * mfn_abs;
-
- do_div(ll, mfd + 1);
-
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- ll = -ll;
-
- ll = (freq * mfi) + ll;
-
- return ll;
-}
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_imx_uart_data_entry(0, 1),
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
+++ /dev/null
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-#ifndef CONFIG_COMMON_CLK
-struct module;
-
-struct clk {
- int id;
- /* Source clock this clk depends on */
- struct clk *parent;
- /* Secondary clock to enable/disable with this clock */
- struct clk *secondary;
- /* Reference count of clock enable/disable */
- __s8 usecount;
- /* Register bit position for clock's enable/disable control. */
- u8 enable_shift;
- /* Register address for clock's enable/disable control. */
- void __iomem *enable_reg;
- u32 flags;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-#endif /* CONFIG_COMMON_CLK */
-
-extern spinlock_t imx_ccm_lock;
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
extern void imx35_soc_init(void);
extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
extern void imx51_init_late(void);
extern void imx53_init_late(void);
extern void epit_timer_init(void __iomem *base, int irq);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
+extern void imx_cpu_die(unsigned int cpu);
+
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
extern void imx51_pm_init(void);
static inline int mx51_neon_fixup(void) { return 0; }
#endif
+extern struct smp_operations imx_smp_ops;
+
#endif
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
-#include <mach/sdma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
extern struct device mxc_aips_bus;
extern struct device mxc_ahb_bus;
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
struct imx_imx21_hcd_data {
resource_size_t iobase;
resource_size_t irq;
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data);
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata);
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
int id;
resource_size_t iobase;
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata);
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
struct imx_imx_ssi_data {
int id;
resource_size_t iobase;
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata);
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
struct imx_imx_uart_3irq_data {
int id;
resource_size_t iobase;
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
struct imx_imx_udc_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
resource_size_t iobase;
resource_size_t synirq;
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
struct imx_mx1_camera_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_mx1_camera_data *data,
const struct mx1_camera_pdata *pdata);
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
resource_size_t iobasecsi;
resource_size_t iosizecsi;
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_camera_data *data);
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
struct imx_mxc_ehci_data {
int id;
resource_size_t iobase;
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata);
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
int id;
resource_size_t iobase;
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata);
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data);
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
struct imx_sdhci_esdhc_imx_data {
const char *devid;
int id;
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata);
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
struct imx_spi_imx_data {
const char *devid;
int id;
+++ /dev/null
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-/*
- * This enumerates peripheral types. Used for SDMA.
- */
-enum sdma_peripheral_type {
- IMX_DMATYPE_SSI, /* MCU domain SSI */
- IMX_DMATYPE_SSI_SP, /* Shared SSI */
- IMX_DMATYPE_MMC, /* MMC */
- IMX_DMATYPE_SDHC, /* SDHC */
- IMX_DMATYPE_UART, /* MCU domain UART */
- IMX_DMATYPE_UART_SP, /* Shared UART */
- IMX_DMATYPE_FIRI, /* FIRI */
- IMX_DMATYPE_CSPI, /* MCU domain CSPI */
- IMX_DMATYPE_CSPI_SP, /* Shared CSPI */
- IMX_DMATYPE_SIM, /* SIM */
- IMX_DMATYPE_ATA, /* ATA */
- IMX_DMATYPE_CCM, /* CCM */
- IMX_DMATYPE_EXT, /* External peripheral */
- IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */
- IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */
- IMX_DMATYPE_DSP, /* DSP */
- IMX_DMATYPE_MEMORY, /* Memory */
- IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
- IMX_DMATYPE_SPDIF, /* SPDIF */
- IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */
- IMX_DMATYPE_ASRC, /* ASRC */
- IMX_DMATYPE_ESAI, /* ESAI */
-};
-
-enum imx_dma_prio {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-};
-
-struct imx_dma_data {
- int dma_request; /* DMA request line */
- enum sdma_peripheral_type peripheral_type;
- int priority;
-};
-
-static inline int imx_dma_is_ipu(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "ipu-core");
-}
-
-static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
-{
- return strstr(dev_name(chan->device->dev), "sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx-dma");
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-enum wp_types {
- ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
- ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
- ESDHC_WP_GPIO, /* external gpio pin for WP */
-};
-
-enum cd_types {
- ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
- ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
- ESDHC_CD_GPIO, /* external gpio pin for CD */
- ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_gpio: gpio for write_protect
- * @cd_gpio: gpio for card_detect interrupt
- * @wp_type: type of write_protect method (see wp_types enum above)
- * @cd_type: type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
- unsigned int wp_gpio;
- unsigned int cd_gpio;
- enum wp_types wp_type;
- enum cd_types cd_type;
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * i2c.h - i.MX I2C driver header file
- *
- * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __ASM_ARCH_I2C_H_
-#define __ASM_ARCH_I2C_H_
-
-/**
- * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @bitrate: Bus speed measured in Hz
- *
- **/
-struct imxi2c_platform_data {
- u32 bitrate;
-};
-
-#endif /* __ASM_ARCH_I2C_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA (1<<1)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
- void (*irda_enable)(int enable);
- unsigned int irda_inv_rx:1;
- unsigned int irda_inv_tx:1;
- unsigned short transceiver_delay;
-};
-
-#endif
+++ /dev/null
-/*
- * This structure describes the machine which we are running on.
- */
-#ifndef __MACH_IMXFB_H__
-#define __MACH_IMXFB_H__
-
-#include <linux/fb.h>
-
-#define PCR_TFT (1 << 31)
-#define PCR_COLOR (1 << 30)
-#define PCR_PBSIZ_1 (0 << 28)
-#define PCR_PBSIZ_2 (1 << 28)
-#define PCR_PBSIZ_4 (2 << 28)
-#define PCR_PBSIZ_8 (3 << 28)
-#define PCR_BPIX_1 (0 << 25)
-#define PCR_BPIX_2 (1 << 25)
-#define PCR_BPIX_4 (2 << 25)
-#define PCR_BPIX_8 (3 << 25)
-#define PCR_BPIX_12 (4 << 25)
-#define PCR_BPIX_16 (5 << 25)
-#define PCR_BPIX_18 (6 << 25)
-#define PCR_PIXPOL (1 << 24)
-#define PCR_FLMPOL (1 << 23)
-#define PCR_LPPOL (1 << 22)
-#define PCR_CLKPOL (1 << 21)
-#define PCR_OEPOL (1 << 20)
-#define PCR_SCLKIDLE (1 << 19)
-#define PCR_END_SEL (1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS (1 << 16)
-#define PCR_ACD_SEL (1 << 15)
-#define PCR_ACD(x) (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL (1 << 7)
-#define PCR_SHARP (1 << 6)
-#define PCR_PCD(x) ((x) & 0x3f)
-
-#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK (1 << 15)
-#define PWMR_SCR1 (1 << 10)
-#define PWMR_SCR0 (1 << 9)
-#define PWMR_CC_EN (1 << 8)
-#define PWMR_PW(x) ((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x) (((x) & 0xf))
-
-#define DMACR_BURST (1 << 31)
-#define DMACR_HM(x) (((x) & 0xf) << 16)
-#define DMACR_TM(x) ((x) & 0xf)
-
-struct imx_fb_videomode {
- struct fb_videomode mode;
- u32 pcr;
- unsigned char bpp;
-};
-
-struct imx_fb_platform_data {
- struct imx_fb_videomode *mode;
- int num_modes;
-
- u_int cmap_greyscale:1,
- cmap_inverse:1,
- cmap_static:1,
- unused:29;
-
- u_int pwmr;
- u_int lscr1;
- u_int dmacr;
-
- u_char * fixed_screen_cpu;
- dma_addr_t fixed_screen_dma;
-
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-
- void (*lcd_power)(int);
- void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
-#endif /* ifndef __MACH_IMXFB_H__ */
#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-
-#include <mach/iomux-v3.h>
-
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_ 0x00
-
-#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
-
-
-#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \
- IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \
- IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \
- IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \
- IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \
- IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \
- IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \
- IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \
- IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \
- IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \
- IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \
- IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \
- IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX53_H__ */
+++ /dev/null
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-/* board specific SDHC data, optional.
- * If not present, a writable card with 3,3V is assumed.
- */
-struct imxmmc_platform_data {
- /* Return values for the get_ro callback should be:
- * 0 for a read/write card
- * 1 for a read-only card
- * -ENOSYS when not supported (equal to NULL callback)
- * or a negative errno value when something bad happened
- */
- int (*get_ro)(struct device *);
-
- /* board specific hook to (de)initialize the SD slot.
- * The board code can call 'handler' on a card detection
- * change giving data as argument.
- */
- int (*init)(struct device *dev, irq_handler_t handler, void *data);
- void (*exit)(struct device *dev, void *data);
-
- /* available voltages. If not given, assume
- * MMC_VDD_32_33 | MMC_VDD_33_34
- */
- unsigned int ocr_avail;
-
- /* adjust slot voltage */
- void (*setpower)(struct device *, unsigned int vdd);
-
- /* enable card detect using DAT3 */
- int dat3_card_detect;
-};
-
-#endif
+++ /dev/null
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH 1
-#define MX1_CAMERA_PCLK_RISING 2
-#define MX1_CAMERA_VSYNC_HIGH 4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz: master clock frequency in 10kHz units
- * @flags: MX1 camera platform flags
- */
-struct mx1_camera_pdata {
- unsigned long mclk_10khz;
- unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
- /* Values below as used by hardware (HWMODE register) */
- MX21_USBXCVR_TXDIF_RXDIF = 0,
- MX21_USBXCVR_TXDIF_RXSE = 1,
- MX21_USBXCVR_TXSE_RXDIF = 2,
- MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
- enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
- enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
- u16 enable_host1:1,
- enable_host2:1,
- enable_otg_host:1, /* enable "OTG" port (as host) */
- host1_xcverless:1, /* traceiverless host1 port */
- host1_txenoe:1, /* output enable host1 transmit enable */
- otg_ext_xcvr:1, /* external tranceiver for OTG port */
- unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
+++ /dev/null
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_SWAP16 (1 << 0)
-#define MX2_CAMERA_EXT_VSYNC (1 << 1)
-#define MX2_CAMERA_CCIR (1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH (1 << 4)
-#define MX2_CAMERA_GATED_CLOCK (1 << 5)
-#define MX2_CAMERA_INV_DATA (1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
- unsigned long flags;
- unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
#define MX31_ROMP_BASE_ADDR 0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT 0xfc500000
+#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000)
#define MX31_ROMP_SIZE SZ_1M
#define MX31_AVIC_BASE_ADDR 0x68000000
#define MX31_CS3_BASE_ADDR 0xb2000000
#define MX31_CS4_BASE_ADDR 0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT 0xf6000000
+#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000)
#define MX31_CS4_SIZE SZ_32M
#define MX31_CS5_BASE_ADDR 0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT 0xf8000000
+#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000)
#define MX31_CS5_SIZE SZ_32M
#define MX31_X_MEMC_BASE_ADDR 0xb8000000
+++ /dev/null
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC 1
-#define MX3_CAMERA_EXT_VSYNC 2
-#define MX3_CAMERA_DP 4
-#define MX3_CAMERA_PCP 8
-#define MX3_CAMERA_HSP 0x10
-#define MX3_CAMERA_VSP 0x20
-#define MX3_CAMERA_DATAWIDTH_4 0x40
-#define MX3_CAMERA_DATAWIDTH_8 0x80
-#define MX3_CAMERA_DATAWIDTH_10 0x100
-#define MX3_CAMERA_DATAWIDTH_15 0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
- MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags: MX3_CAMERA_* flags
- * @mclk_10khz: master clock frequency in 10kHz units
- * @dma_dev: IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
- unsigned long flags;
- unsigned long mclk_10khz;
- struct device *dma_dev;
-};
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH 0x80000000
-#define FB_SYNC_CLK_INVERT 0x40000000
-#define FB_SYNC_DATA_INVERT 0x20000000
-#define FB_SYNC_CLK_IDLE_EN 0x10000000
-#define FB_SYNC_SHARP_MODE 0x08000000
-#define FB_SYNC_SWAP_RGB 0x04000000
-#define FB_SYNC_CLK_SEL_EN 0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
- /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
- IPU_DISP_DATA_MAPPING_RGB666,
- /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
- IPU_DISP_DATA_MAPPING_RGB565,
- /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
- IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev: pointer to the dma-device, used for dma-slave connection
- * @mode: pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
- struct device *dma_dev;
- const char *name;
- const struct fb_videomode *mode;
- int num_modes;
- enum disp_data_mapping disp_data_fmt;
-};
-
-#endif
+++ /dev/null
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-#define MX5_USBOTHER_REGS_OFFSET 0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
-
-struct mxc_usbh_platform_data {
- int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
-
- unsigned int portsc;
- struct usb_phy *otg;
-};
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-#include <linux/mtd/partitions.h>
-
-struct mxc_nand_platform_data {
- unsigned int width; /* data bus width in bytes */
- unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */
- unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
- struct mtd_partition *parts; /* partition table */
- int nr_parts; /* size of parts */
-};
-#endif /* __ASM_ARCH_NAND_H */
+++ /dev/null
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
- s32 ap_2_ap_addr;
- s32 ap_2_bp_addr;
- s32 ap_2_ap_fixed_addr;
- s32 bp_2_ap_addr;
- s32 loopback_on_dsp_side_addr;
- s32 mcu_interrupt_only_addr;
- s32 firi_2_per_addr;
- s32 firi_2_mcu_addr;
- s32 per_2_firi_addr;
- s32 mcu_2_firi_addr;
- s32 uart_2_per_addr;
- s32 uart_2_mcu_addr;
- s32 per_2_app_addr;
- s32 mcu_2_app_addr;
- s32 per_2_per_addr;
- s32 uartsh_2_per_addr;
- s32 uartsh_2_mcu_addr;
- s32 per_2_shp_addr;
- s32 mcu_2_shp_addr;
- s32 ata_2_mcu_addr;
- s32 mcu_2_ata_addr;
- s32 app_2_per_addr;
- s32 app_2_mcu_addr;
- s32 shp_2_per_addr;
- s32 shp_2_mcu_addr;
- s32 mshc_2_mcu_addr;
- s32 mcu_2_mshc_addr;
- s32 spdif_2_mcu_addr;
- s32 mcu_2_spdif_addr;
- s32 asrc_2_mcu_addr;
- s32 ext_mem_2_ipu_addr;
- s32 descrambler_addr;
- s32 dptc_dvfs_addr;
- s32 utra_addr;
- s32 ram_code_start_addr;
-};
-
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name The firmware name
- * @script_addrs SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
- char *fw_name;
- struct sdma_script_start_addrs *script_addrs;
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
+++ /dev/null
-
-#ifndef __MACH_SPI_H_
-#define __MACH_SPI_H_
-
-/*
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- * pins, numbers < 0 mean internal CSPI chipselects according
- * to MXC_SPI_CS(). Normally you want to use gpio based chip
- * selects as the CSPI module tries to be intelligent about
- * when to assert the chipselect: The CSPI module deasserts the
- * chipselect once it runs out of input data. The other problem
- * is that it is not possible to mix between high active and low
- * active chipselects on one single bus using the internal
- * chipselects. Unfortunately Freescale decided to put some
- * chipselects on dedicated pins which are not usable as gpios,
- * so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
- */
-struct spi_imx_master {
- int *chipselect;
- int num_chipselect;
-};
-
-#define MXC_SPI_CS(no) ((no) - 32)
-
-#endif /* __MACH_SPI_H_*/
+++ /dev/null
-#ifndef __MACH_SSI_H
-#define __MACH_SSI_H
-
-struct snd_ac97;
-
-extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
-extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
-
-struct imx_ssi_platform_data {
- unsigned int flags;
-#define IMX_SSI_DMA (1 << 0)
-#define IMX_SSI_USE_AC97 (1 << 1)
-#define IMX_SSI_NET (1 << 2)
-#define IMX_SSI_SYN (1 << 3)
-#define IMX_SSI_USE_I2S_SLAVE (1 << 4)
- void (*ac97_reset) (struct snd_ac97 *ac97);
- void (*ac97_warm_reset)(struct snd_ac97 *ac97);
-};
-
-#endif /* __MACH_SSI_H */
-
+++ /dev/null
-/*
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
#include <linux/module.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
.global imx_ssi_fiq_rx_buffer
.global imx_ssi_fiq_tx_buffer
+/*
+ * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol
+ * using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to
+ * mark the function body so that it can be copied to the FIQ vector in
+ * the vectors page. imx_ssi_fiq_start should only be called as the result
+ * of an FIQ: calling it directly will not work.
+ */
imx_ssi_fiq_start:
- ldr r12, imx_ssi_fiq_base
+ ldr r12, .L_imx_ssi_fiq_base
/* TX */
- ldr r11, imx_ssi_fiq_tx_buffer
+ ldr r13, .L_imx_ssi_fiq_tx_buffer
/* shall we send? */
- ldr r13, [r12, #SSI_SIER]
- tst r13, #SSI_SIER_TFE0_EN
+ ldr r11, [r12, #SSI_SIER]
+ tst r11, #SSI_SIER_TFE0_EN
beq 1f
/* TX FIFO empty? */
- ldr r13, [r12, #SSI_SISR]
- tst r13, #SSI_SISR_TFE0
+ ldr r11, [r12, #SSI_SISR]
+ tst r11, #SSI_SISR_TFE0
beq 1f
mov r10, #0x10000
sub r10, #1
and r10, r10, r8 /* r10: current buffer offset */
- add r11, r11, r10
+ add r13, r13, r10
- ldrh r13, [r11]
- strh r13, [r12, #SSI_STX0]
+ ldrh r11, [r13]
+ strh r11, [r12, #SSI_STX0]
- ldrh r13, [r11, #2]
- strh r13, [r12, #SSI_STX0]
+ ldrh r11, [r13, #2]
+ strh r11, [r12, #SSI_STX0]
- ldrh r13, [r11, #4]
- strh r13, [r12, #SSI_STX0]
+ ldrh r11, [r13, #4]
+ strh r11, [r12, #SSI_STX0]
- ldrh r13, [r11, #6]
- strh r13, [r12, #SSI_STX0]
+ ldrh r11, [r13, #6]
+ strh r11, [r12, #SSI_STX0]
add r10, #8
- lsr r13, r8, #16 /* r13: buffer size */
- cmp r10, r13
- lslgt r8, r13, #16
+ lsr r11, r8, #16 /* r11: buffer size */
+ cmp r10, r11
+ lslgt r8, r11, #16
addle r8, #8
1:
/* RX */
/* shall we receive? */
- ldr r13, [r12, #SSI_SIER]
- tst r13, #SSI_SIER_RFF0_EN
+ ldr r11, [r12, #SSI_SIER]
+ tst r11, #SSI_SIER_RFF0_EN
beq 1f
/* RX FIFO full? */
- ldr r13, [r12, #SSI_SISR]
- tst r13, #SSI_SISR_RFF0
+ ldr r11, [r12, #SSI_SISR]
+ tst r11, #SSI_SISR_RFF0
beq 1f
- ldr r11, imx_ssi_fiq_rx_buffer
+ ldr r13, .L_imx_ssi_fiq_rx_buffer
mov r10, #0x10000
sub r10, #1
and r10, r10, r9 /* r10: current buffer offset */
- add r11, r11, r10
+ add r13, r13, r10
- ldr r13, [r12, #SSI_SACNT]
- tst r13, #SSI_SACNT_AC97EN
+ ldr r11, [r12, #SSI_SACNT]
+ tst r11, #SSI_SACNT_AC97EN
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11]
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #2]
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #2]
/* dummy read to skip slot 12 */
- ldrne r13, [r12, #SSI_SRX0]
+ ldrne r11, [r12, #SSI_SRX0]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #4]
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #4]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #6]
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #6]
/* dummy read to skip slot 12 */
- ldrne r13, [r12, #SSI_SRX0]
+ ldrne r11, [r12, #SSI_SRX0]
add r10, #8
- lsr r13, r9, #16 /* r13: buffer size */
- cmp r10, r13
- lslgt r9, r13, #16
+ lsr r11, r9, #16 /* r11: buffer size */
+ cmp r10, r11
+ lslgt r9, r11, #16
addle r9, #8
1:
subs pc, lr, #4
.align
+.L_imx_ssi_fiq_base:
imx_ssi_fiq_base:
.word 0x0
+.L_imx_ssi_fiq_rx_buffer:
imx_ssi_fiq_rx_buffer:
.word 0x0
+.L_imx_ssi_fiq_tx_buffer:
imx_ssi_fiq_tx_buffer:
.word 0x0
+.L_imx_ssi_fiq_end:
imx_ssi_fiq_end:
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
static void __iomem *wdog_base;
/*
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
- *
- * ux500 Scroll key and Keypad Encoder (SKE) header
- */
-
-#ifndef __SKE_H
-#define __SKE_H
-
-#include <linux/input/matrix_keypad.h>
-
-/* register definitions for SKE peripheral */
-#define SKE_CR 0x00
-#define SKE_VAL0 0x04
-#define SKE_VAL1 0x08
-#define SKE_DBCR 0x0C
-#define SKE_IMSC 0x10
-#define SKE_RIS 0x14
-#define SKE_MIS 0x18
-#define SKE_ICR 0x1C
-
-/*
- * Keypad module
- */
-
-/**
- * struct keypad_platform_data - structure for platform specific data
- * @init: pointer to keypad init function
- * @exit: pointer to keypad deinitialisation function
- * @keymap_data: matrix scan code table for keycodes
- * @krow: maximum number of rows
- * @kcol: maximum number of columns
- * @debounce_ms: platform specific debounce time
- * @no_autorepeat: flag for auto repetition
- * @wakeup_enable: allow waking up the system
- */
-struct ske_keypad_platform_data {
- int (*init)(void);
- int (*exit)(void);
- const struct matrix_keymap_data *keymap_data;
- u8 krow;
- u8 kcol;
- u8 debounce_ms;
- bool no_autorepeat;
- bool wakeup_enable;
-};
-#endif /*__SKE_KPD_H*/
bool "TI OMAP2/3/4"
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select SPARSE_IRQ
select OMAP_DM_TIMER
select USE_OF
select PROC_DEVICETREE if PROC_FS
#
# Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
#include <linux/dma-mapping.h>
#include <plat/common.h>
-#include <plat/board.h>
#include <plat/vram.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <plat/dma.h>
#include <plat/omap-secure.h>
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-struct omap_board_config_kernel *omap_board_config __initdata;
-int omap_board_config_size;
-
-static const void *__init get_config(u16 tag, size_t len,
- int skip, size_t *len_out)
-{
- struct omap_board_config_kernel *kinfo = NULL;
- int i;
-
- /* Try to find the config from the board-specific structures
- * in the kernel. */
- for (i = 0; i < omap_board_config_size; i++) {
- if (omap_board_config[i].tag == tag) {
- if (skip == 0) {
- kinfo = &omap_board_config[i];
- break;
- } else {
- skip--;
- }
- }
- }
- if (kinfo == NULL)
- return NULL;
- return kinfo->data;
-}
-
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-{
- return get_config(tag, len, nr, NULL);
-}
-
-const void *__init omap_get_var_config(u16 tag, size_t *len)
-{
- return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-
void __init omap_reserve(void)
{
omap_vram_reserve_sdram_memblock();
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/hardware.h>
#include <plat/common.h>
-#include <plat/board.h>
-
#include <plat/clock.h>
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#include <mach/hardware.h>
-#include <plat/board.h>
-
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
*/
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define OMAP_RNG_BASE 0x480A0000
-#else
-#define OMAP_RNG_BASE 0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
- {
- .start = OMAP_RNG_BASE,
- .end = OMAP_RNG_BASE + 0x4f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap_rng_device = {
- .name = "omap_rng",
- .id = -1,
- .num_resources = ARRAY_SIZE(rng_resources),
- .resource = rng_resources,
-};
-
-static void omap_init_rng(void)
-{
- (void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- * (a) Does any "standard config" pin muxing needed. Board-specific
- * code will have muxed GPIO pins and done "nonstandard" setup;
- * that code could live in the boot loader.
- * (b) Populating board-specific platform_data with the data drivers
- * rely on to handle wiring variations.
- * (c) Creating platform devices as meaningful on this board and
- * with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers. So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible. In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
- /* please keep these calls, and their implementations above,
- * in alphabetical order so they're easier to sort through.
- */
- omap_init_rng();
- return 0;
-}
-arch_initcall(omap_init_devices);
#include <linux/slab.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
-
#include <plat/tc.h>
/*
l = p->dma_read(CCR, lch);
}
if (i >= 100)
- printk(KERN_ERR "DMA drain did not complete on "
- "lch %d\n", lch);
+ pr_err("DMA drain did not complete on lch %d\n", lch);
/* Restore OCP_SYSCONFIG */
p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
} else {
if ((dma_chan[lch_head].dev_id == -1) ||
(dma_chan[lch_queue].dev_id == -1)) {
- printk(KERN_ERR "omap_dma: trying to link "
- "non requested channels\n");
+ pr_err("omap_dma: trying to link non requested channels\n");
dump_stack();
}
if (dma_chan[lch_head].next_lch != lch_queue ||
dma_chan[lch_head].next_lch == -1) {
- printk(KERN_ERR "omap_dma: trying to unlink "
- "non linked channels\n");
+ pr_err("omap_dma: trying to unlink non linked channels\n");
dump_stack();
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
- printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
- "before unlinking\n");
+ pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
dump_stack();
}
if ((csr & 0x3f) == 0)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1)) {
- printk(KERN_WARNING "Spurious interrupt from DMA channel "
- "%d (CSR %04x)\n", ch, csr);
+ pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+ ch, csr);
return 0;
}
if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
- printk(KERN_WARNING "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
+ pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
- printk(KERN_WARNING "DMA synchronization event drop occurred "
- "with device %d\n", dma_chan[ch].dev_id);
+ pr_warn("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (likely(csr & OMAP_DMA_BLOCK_IRQ))
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
if (!status) {
if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
- ch);
+ pr_warn("Spurious DMA IRQ for lch %d\n", ch);
p->dma_write(1 << ch, IRQSTATUS_L0, ch);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
if (printk_ratelimit())
- printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
- "channel %d\n", status, ch);
+ pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
+ status, ch);
return 0;
}
if (unlikely(status & OMAP_DMA_DROP_IRQ))
- printk(KERN_INFO
- "DMA synchronization event drop occurred with device "
- "%d\n", dma_chan[ch].dev_id);
+ pr_info("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
p = pdev->dev.platform_data;
if (!p) {
- dev_err(&pdev->dev, "%s: System DMA initialized without"
- "platform data\n", __func__);
+ dev_err(&pdev->dev,
+ "%s: System DMA initialized without platform data\n",
+ __func__);
return -EINVAL;
}
}
ret = setup_irq(dma_irq, &omap24xx_dma_irq);
if (ret) {
- dev_err(&pdev->dev, "set_up failed for IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
goto exit_dma_lch_fail;
}
}
/* reserve dma channels 0 and 1 in high security devices */
if (cpu_is_omap34xx() &&
(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
- "HS ROM code\n");
+ pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
}
return 0;
exit_dma_irq_fail:
- dev_err(&pdev->dev, "unable to request IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
for (irq_rel = 0; irq_rel < ch; irq_rel++) {
dma_irq = platform_get_irq(pdev, irq_rel);
free_irq(dma_irq, (void *)(irq_rel + 1));
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
-
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
#include <linux/clk.h>
#include <mach/irqs.h>
-#include <plat/mux.h>
#include <plat/i2c.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
res = pdev->resource;
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
- res[1].start = INT_I2C;
+ res[1].start = OMAP1_INT_I2C;
pdata = &i2c_pdata[bus_id - 1];
/* all OMAP1 have IP version 1 register set */
+++ /dev/null
-/*
- * This file contains the address info for various AM33XX modules.
- *
- * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_AM33XX_H
-#define __ASM_ARCH_AM33XX_H
-
-#define L4_SLOW_AM33XX_BASE 0x48000000
-
-#define AM33XX_SCM_BASE 0x44E10000
-#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
-#define AM33XX_PRCM_BASE 0x44E00000
-
-#endif /* __ASM_ARCH_AM33XX_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
-#define AMS_DELTA_GPIO_PIN_CONFIG 11
-#define AMS_DELTA_GPIO_PIN_NAND_RB 12
-
-#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
-#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
-#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
-#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
-#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
-#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
-#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
-#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
-#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
-#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
-#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
-#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
-#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
-
-#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
-#define AMS_DELTA_LATCH2_NGPIO 16
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch2_write(mask, value) \
- ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
- AMS_DELTA_LATCH2_NGPIO, (mask), (value))
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
+++ /dev/null
-/*
- * Siemens SX1 board definitions
- *
- * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
-#define __ASM_ARCH_SX1_I2C_CHIPS_H
-
-#define SOFIA_MAX_LIGHT_VAL 0x2B
-
-#define SOFIA_I2C_ADDR 0x32
-/* Sofia reg 3 bits masks */
-#define SOFIA_POWER1_REG 0x03
-
-#define SOFIA_USB_POWER 0x01
-#define SOFIA_MMC_POWER 0x04
-#define SOFIA_BLUETOOTH_POWER 0x08
-#define SOFIA_MMILIGHT_POWER 0x20
-
-#define SOFIA_POWER2_REG 0x04
-#define SOFIA_BACKLIGHT_REG 0x06
-#define SOFIA_KEYLIGHT_REG 0x07
-#define SOFIA_DIMMING_REG 0x09
-
-
-/* Function Prototypes for SX1 devices control on I2C bus */
-
-int sx1_setbacklight(u8 backlight);
-int sx1_getbacklight(u8 *backlight);
-int sx1_setkeylight(u8 keylight);
-int sx1_getkeylight(u8 *keylight);
-
-int sx1_setmmipower(u8 onoff);
-int sx1_setusbpower(u8 onoff);
-int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
-int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
-
-/* MMC prototypes */
-
-extern void sx1_mmc_init(void);
-extern void sx1_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
+++ /dev/null
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /* __ASM_ARCH_VOICEBLUE_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board.h
- *
- * Information structures for board-specific data
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <plat/gpio-switch.h>
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- * GEN_1 = 0x01150000
- * GEN_2 = 0x92200000
- */
-enum {
- OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
- OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
-};
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_STI_CONSOLE 0x4f09
-#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
-
-#define OMAP_TAG_BOOT_REASON 0x4f80
-#define OMAP_TAG_FLASH_PART 0x4f81
-#define OMAP_TAG_VERSION_STR 0x4f82
-
-struct omap_clock_config {
- /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
- u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
- u8 console_uart;
- u32 console_speed;
-};
-
-struct omap_sti_console_config {
- unsigned enable:1;
- u8 channel;
-};
-
-struct omap_camera_sensor_config {
- u16 reset_gpio;
- int (*power_on)(void * data);
- int (*power_off)(void * data);
-};
-
-struct omap_lcd_config {
- char panel_name[16];
- char ctrl_name[16];
- s16 nreset_gpio;
- u8 data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
- int default_intensity;
- int (*set_power)(struct device *dev, int state);
-};
-
-struct omap_fbmem_config {
- u32 start;
- u32 size;
-};
-
-struct omap_pwm_led_platform_data {
- const char *name;
- int intensity_timer;
- int blink_timer;
- void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-struct omap_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART1 */
- unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
- char part_table[0];
-};
-
-struct omap_boot_reason_config {
- char reason_str[12];
-};
-
-struct omap_version_config {
- char component[12];
- char version[12];
-};
-
-struct omap_board_config_entry {
- u16 tag;
- u16 len;
- u8 data[0];
-};
-
-struct omap_board_config_kernel {
- u16 tag;
- const void *data;
-};
-
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
- ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
- ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
-#endif
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+#ifndef __ASSEMBLY__
+
#include <linux/bitops.h>
#include <plat/multi.h>
OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+#endif /* __ASSEMBLY__ */
#endif
/* Move omap4 specific defines to dma-44xx.h */
#include "dma-44xx.h"
+#define INT_DMA_LCD 25
+
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
#define OMAP_DMA_MCSI1_TX 1
+++ /dev/null
-#ifndef __OMAP_DSP_H__
-#define __OMAP_DSP_H__
-
-#include <linux/types.h>
-
-struct omap_dsp_platform_data {
- void (*dsp_set_min_opp) (u8 opp_id);
- u8 (*dsp_get_opp) (void);
- void (*cpu_set_freq) (unsigned long f);
- unsigned long (*cpu_get_freq) (void);
- unsigned long mpu_speed[6];
-
- /* functions to write and read PRCM registers */
- void (*dsp_prm_write)(u32, s16 , u16);
- u32 (*dsp_prm_read)(s16 , u16);
- u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
- void (*dsp_cm_write)(u32, s16 , u16);
- u32 (*dsp_cm_read)(s16 , u16);
- u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
-
- void (*set_bootaddr)(u32);
- void (*set_bootmode)(u8);
-
- phys_addr_t phys_mempool_base;
- phys_addr_t phys_mempool_size;
-};
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-extern void omap_dsp_reserve_sdram_memblock(void);
-#else
-static inline void omap_dsp_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
+++ /dev/null
-/*
- * Flash support for OMAP1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_FLASH_H
-#define __OMAP_FLASH_H
-
-#include <linux/mtd/map.h>
-
-struct platform_device;
-extern void omap1_set_vpp(struct platform_device *pdev, int enable);
-
-#endif
+++ /dev/null
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-
-#include <linux/types.h>
-
-/* Cover:
- * high -> closed
- * low -> open
- * Connection:
- * high -> connected
- * low -> disconnected
- * Activity:
- * high -> active
- * low -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002
-
-struct omap_gpio_switch {
- const char *name;
- s16 gpio;
- unsigned flags:4;
- unsigned type:4;
-
- /* Time in ms to debounce when transitioning from
- * inactive state to active state. */
- u16 debounce_rising;
- /* Same for transition from active to inactive state. */
- u16 debounce_falling;
-
- /* notify board-specific code about state changes */
- void (* notify)(void *data, int state);
- void *notify_data;
-};
-
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
- int count);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-
-#define OMAP1_MPUIO_BASE 0xfffb5000
-
-/*
- * These are the omap15xx/16xx offsets. The omap7xx offset are
- * OMAP_MPUIO_ / 2 offsets below.
- */
-#define OMAP_MPUIO_INPUT_LATCH 0x00
-#define OMAP_MPUIO_OUTPUT 0x04
-#define OMAP_MPUIO_IO_CNTL 0x08
-#define OMAP_MPUIO_KBR_LATCH 0x10
-#define OMAP_MPUIO_KBC 0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
-#define OMAP_MPUIO_KBD_INT 0x20
-#define OMAP_MPUIO_GPIO_INT 0x24
-#define OMAP_MPUIO_KBD_MASKIT 0x28
-#define OMAP_MPUIO_GPIO_MASKIT 0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
-#define OMAP_MPUIO_LATCH 0x34
-
-#define OMAP34XX_NR_GPIOS 6
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT 0x00
-#define OMAP1510_GPIO_DATA_OUTPUT 0x04
-#define OMAP1510_GPIO_DIR_CONTROL 0x08
-#define OMAP1510_GPIO_INT_CONTROL 0x0c
-#define OMAP1510_GPIO_INT_MASK 0x10
-#define OMAP1510_GPIO_INT_STATUS 0x14
-#define OMAP1510_GPIO_PIN_CONTROL 0x18
-
-#define OMAP1510_IH_GPIO_BASE 64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION 0x0000
-#define OMAP1610_GPIO_SYSCONFIG 0x0010
-#define OMAP1610_GPIO_SYSSTATUS 0x0014
-#define OMAP1610_GPIO_IRQSTATUS1 0x0018
-#define OMAP1610_GPIO_IRQENABLE1 0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
-#define OMAP1610_GPIO_DATAIN 0x002c
-#define OMAP1610_GPIO_DATAOUT 0x0030
-#define OMAP1610_GPIO_DIRECTION 0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT 0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
-#define OMAP7XX_GPIO_DIR_CONTROL 0x08
-#define OMAP7XX_GPIO_INT_CONTROL 0x0c
-#define OMAP7XX_GPIO_INT_MASK 0x10
-#define OMAP7XX_GPIO_INT_STATUS 0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION 0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
-#define OMAP24XX_GPIO_IRQENABLE2 0x002c
-#define OMAP24XX_GPIO_IRQENABLE1 0x001c
-#define OMAP24XX_GPIO_WAKE_EN 0x0020
-#define OMAP24XX_GPIO_CTRL 0x0030
-#define OMAP24XX_GPIO_OE 0x0034
-#define OMAP24XX_GPIO_DATAIN 0x0038
-#define OMAP24XX_GPIO_DATAOUT 0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
-#define OMAP24XX_GPIO_RISINGDETECT 0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
-#define OMAP24XX_GPIO_SETWKUENA 0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
-#define OMAP24XX_GPIO_SETDATAOUT 0x0094
-
-#define OMAP4_GPIO_REVISION 0x0000
-#define OMAP4_GPIO_EOI 0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
-#define OMAP4_GPIO_IRQSTATUS0 0x002c
-#define OMAP4_GPIO_IRQSTATUS1 0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
-#define OMAP4_GPIO_IRQWAKEN0 0x0044
-#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_IRQENABLE1 0x011c
-#define OMAP4_GPIO_WAKE_EN 0x0120
-#define OMAP4_GPIO_IRQSTATUS2 0x0128
-#define OMAP4_GPIO_IRQENABLE2 0x012c
-#define OMAP4_GPIO_CTRL 0x0130
-#define OMAP4_GPIO_OE 0x0134
-#define OMAP4_GPIO_DATAIN 0x0138
-#define OMAP4_GPIO_DATAOUT 0x013c
-#define OMAP4_GPIO_LEVELDETECT0 0x0140
-#define OMAP4_GPIO_LEVELDETECT1 0x0144
-#define OMAP4_GPIO_RISINGDETECT 0x0148
-#define OMAP4_GPIO_FALLINGDETECT 0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
-#define OMAP4_GPIO_SETIRQENABLE1 0x0164
-#define OMAP4_GPIO_CLEARWKUENA 0x0180
-#define OMAP4_GPIO_SETWKUENA 0x0184
-#define OMAP4_GPIO_CLEARDATAOUT 0x0190
-#define OMAP4_GPIO_SETDATAOUT 0x0194
-
-#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
-
-struct omap_gpio_dev_attr {
- int bank_width; /* GPIO bank width */
- bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
-};
-
-struct omap_gpio_reg_offs {
- u16 revision;
- u16 direction;
- u16 datain;
- u16 dataout;
- u16 set_dataout;
- u16 clr_dataout;
- u16 irqstatus;
- u16 irqstatus2;
- u16 irqstatus_raw0;
- u16 irqstatus_raw1;
- u16 irqenable;
- u16 irqenable2;
- u16 set_irqenable;
- u16 clr_irqenable;
- u16 debounce;
- u16 debounce_en;
- u16 ctrl;
- u16 wkup_en;
- u16 leveldetect0;
- u16 leveldetect1;
- u16 risingdetect;
- u16 fallingdetect;
- u16 irqctrl;
- u16 edgectrl1;
- u16 edgectrl2;
- u16 pinctrl;
-
- bool irqenable_inv;
-};
-
-struct omap_gpio_platform_data {
- int bank_type;
- int bank_width; /* GPIO bank width */
- int bank_stride; /* Only needed for omap1 MPUIO */
- bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
- bool loses_context; /* whether the bank would ever lose context */
- bool is_mpuio; /* whether the bank is of type MPUIO */
- u32 non_wakeup_gpios;
-
- struct omap_gpio_reg_offs *regs;
-
- /* Return context loss count due to PM states changing */
- int (*get_context_loss_count)(struct device *dev);
-};
-
-extern void omap2_gpio_prepare_for_idle(int off_mode);
-extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96 (1 << 4)
-#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
- int cs;
- int gpio_irq;
- int gpio_pwrdwn;
- int gpio_reset;
- int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
- u32 flags;
- int (*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
- defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
- int id;
- int cs;
- int gpio_irq;
- int gpio_reset;
- u32 flags;
-};
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
+struct gpmc_nand_regs {
+ void __iomem *gpmc_status;
+ void __iomem *gpmc_nand_command;
+ void __iomem *gpmc_nand_address;
+ void __iomem *gpmc_nand_data;
+ void __iomem *gpmc_prefetch_config1;
+ void __iomem *gpmc_prefetch_config2;
+ void __iomem *gpmc_prefetch_control;
+ void __iomem *gpmc_prefetch_status;
+ void __iomem *gpmc_ecc_config;
+ void __iomem *gpmc_ecc_control;
+ void __iomem *gpmc_ecc_size_config;
+ void __iomem *gpmc_ecc1_result;
+ void __iomem *gpmc_bch_result0;
+};
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- * file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <plat/cpu.h>
-#endif
-#include <plat/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- * files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE (0xfffec500)
-#define OMAP_MPU_TIMER2_BASE (0xfffec600)
-#define OMAP_MPU_TIMER3_BASE (0xfffec700)
-#define MPU_TIMER_FREE (1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
-#define MPU_TIMER_AR (1 << 1)
-#define MPU_TIMER_ST (1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE (0xfffece00)
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF 1
-#define CK_IDLEF 2
-#define CK_ENABLEF 4
-#define CK_SELECTF 8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL (0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
-#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE (0xfffe0800)
-#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
-# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
-# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
-# define SOFT_UDC_REQ (1 << 4)
-# define SOFT_USB_CLK_REQ (1 << 3)
-# define SOFT_DPLL_REQ (1 << 0)
-#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
-# define DIS_MMC2_DPLL_REQ (1 << 11)
-# define DIS_MMC1_DPLL_REQ (1 << 10)
-# define DIS_UART3_DPLL_REQ (1 << 9)
-# define DIS_UART2_DPLL_REQ (1 << 8)
-# define DIS_UART1_DPLL_REQ (1 << 7)
-# define DIS_USB_HOST_DPLL_REQ (1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
-#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE 0xfffecb00
-#define OMAP_IH2_BASE 0xfffe0000
-
-#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET 0x00
-#define IRQ_MIR_REG_OFFSET 0x04
-#define IRQ_SIR_IRQ_REG_OFFSET 0x10
-#define IRQ_SIR_FIQ_REG_OFFSET 0x14
-#define IRQ_CONTROL_REG_OFFSET 0x18
-#define IRQ_ISR_REG_OFFSET 0x9c
-#define IRQ_ILR0_REG_OFFSET 0x1c
-#define IRQ_GMR_REG_OFFSET 0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0 0xfffe1080
-#define MOD_CONF_CTRL_1 0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0 0xfffe1000
-#define FUNC_MUX_CTRL_1 0xfffe1004
-#define FUNC_MUX_CTRL_2 0xfffe1008
-#define COMP_MODE_CTRL_0 0xfffe100c
-#define FUNC_MUX_CTRL_3 0xfffe1010
-#define FUNC_MUX_CTRL_4 0xfffe1014
-#define FUNC_MUX_CTRL_5 0xfffe1018
-#define FUNC_MUX_CTRL_6 0xfffe101C
-#define FUNC_MUX_CTRL_7 0xfffe1020
-#define FUNC_MUX_CTRL_8 0xfffe1024
-#define FUNC_MUX_CTRL_9 0xfffe1028
-#define FUNC_MUX_CTRL_A 0xfffe102C
-#define FUNC_MUX_CTRL_B 0xfffe1030
-#define FUNC_MUX_CTRL_C 0xfffe1034
-#define FUNC_MUX_CTRL_D 0xfffe1038
-#define PULL_DWN_CTRL_0 0xfffe1040
-#define PULL_DWN_CTRL_1 0xfffe1044
-#define PULL_DWN_CTRL_2 0xfffe1048
-#define PULL_DWN_CTRL_3 0xfffe104c
-#define PULL_DWN_CTRL_4 0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E 0xfffe1090
-#define FUNC_MUX_CTRL_F 0xfffe1094
-#define FUNC_MUX_CTRL_10 0xfffe1098
-#define FUNC_MUX_CTRL_11 0xfffe109c
-#define FUNC_MUX_CTRL_12 0xfffe10a0
-#define PU_PD_SEL_0 0xfffe10b4
-#define PU_PD_SEL_1 0xfffe10b8
-#define PU_PD_SEL_2 0xfffe10bc
-#define PU_PD_SEL_3 0xfffe10c0
-#define PU_PD_SEL_4 0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE 0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE (0xfffec900)
-#define MPUI_CTRL (MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE 0xfffbd000
-#define OMAP_LPG2_BASE 0xfffbd800
-#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE 0xfffb5800
-#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-#include <plat/omap54xx.h>
-
-#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
+++ /dev/null
-/*
- * Shared macros and function prototypes for the HDQ1W/1-wire IP block
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-
-#include <plat/omap_hwmod.h>
-
-/*
- * XXX A future cleanup patch should modify
- * drivers/w1/masters/omap_hdq.c to use these macros
- */
-#define HDQ_CTRL_STATUS_OFFSET 0x0c
-#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT 5
-
-
-extern int omap_hdq1w_reset(struct omap_hwmod *oh);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/irda.h
- *
- * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL 1 /* Selects IrDA */
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-#define IR_MIRMODE 8
-
-struct omap_irda_config {
- int transceiver_cap;
- int (*transceiver_mode)(struct device *dev, int mode);
- int (*select_irda)(struct device *dev, int state);
- int rx_channel;
- int tx_channel;
- unsigned long dest_start;
- unsigned long src_start;
- int tx_trigger;
- int rx_trigger;
- int mode;
-};
-
-#endif
+++ /dev/null
-/*
- * OMAP4 Interrupt lines definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-
-/* OMAP44XX IRQs numbers definitions */
-#define OMAP44XX_IRQ_LOCALTIMER 29
-#define OMAP44XX_IRQ_LOCALWDT 30
-
-#define OMAP44XX_IRQ_GIC_START 32
-
-#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/irqs.h
- *
- * Copyright (C) Greg Lonnon 2001
- * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- * are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/* All OMAP4 specific defines are moved to irqs-44xx.h */
-#include "irqs-44xx.h"
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA 1
-#define INT_FIQ 3
-#define INT_RTDX 6
-#define INT_DSP_MMU_ABORT 7
-#define INT_HOST 8
-#define INT_ABORT 9
-#define INT_BRIDGE_PRIV 13
-#define INT_GPIO_BANK1 14
-#define INT_UART3 15
-#define INT_TIMER3 16
-#define INT_DMA_CH0_6 19
-#define INT_DMA_CH1_7 20
-#define INT_DMA_CH2_8 21
-#define INT_DMA_CH3 22
-#define INT_DMA_CH4 23
-#define INT_DMA_CH5 24
-#define INT_DMA_LCD 25
-#define INT_TIMER1 26
-#define INT_WD_TIMER 27
-#define INT_BRIDGE_PUB 28
-#define INT_TIMER2 30
-#define INT_LCD_CTRL 31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ 0
-#define INT_1510_RES2 2
-#define INT_1510_SPI_TX 4
-#define INT_1510_SPI_RX 5
-#define INT_1510_DSP_MAILBOX1 10
-#define INT_1510_DSP_MAILBOX2 11
-#define INT_1510_RES12 12
-#define INT_1510_LB_MMU 17
-#define INT_1510_RES18 18
-#define INT_1510_LOCAL_BUS 29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ 2
-#define INT_1610_McBSP2_TX 4
-#define INT_1610_McBSP2_RX 5
-#define INT_1610_DSP_MAILBOX1 10
-#define INT_1610_DSP_MAILBOX2 11
-#define INT_1610_LCD_LINE 12
-#define INT_1610_GPTIMER1 17
-#define INT_1610_GPTIMER2 18
-#define INT_1610_SSR_FIFO_0 29
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ 0
-#define INT_7XX_IH2_IRQ 1
-#define INT_7XX_USB_NON_ISO 2
-#define INT_7XX_USB_ISO 3
-#define INT_7XX_ICR 4
-#define INT_7XX_EAC 5
-#define INT_7XX_GPIO_BANK1 6
-#define INT_7XX_GPIO_BANK2 7
-#define INT_7XX_GPIO_BANK3 8
-#define INT_7XX_McBSP2TX 10
-#define INT_7XX_McBSP2RX 11
-#define INT_7XX_McBSP2RX_OVF 12
-#define INT_7XX_LCD_LINE 14
-#define INT_7XX_GSM_PROTECT 15
-#define INT_7XX_TIMER3 16
-#define INT_7XX_GPIO_BANK5 17
-#define INT_7XX_GPIO_BANK6 18
-#define INT_7XX_SPGIO_WR 29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE 32
-
-#define INT_KEYBOARD (1 + IH2_BASE)
-#define INT_uWireTX (2 + IH2_BASE)
-#define INT_uWireRX (3 + IH2_BASE)
-#define INT_I2C (4 + IH2_BASE)
-#define INT_MPUIO (5 + IH2_BASE)
-#define INT_USB_HHC_1 (6 + IH2_BASE)
-#define INT_McBSP3TX (10 + IH2_BASE)
-#define INT_McBSP3RX (11 + IH2_BASE)
-#define INT_McBSP1TX (12 + IH2_BASE)
-#define INT_McBSP1RX (13 + IH2_BASE)
-#define INT_UART1 (14 + IH2_BASE)
-#define INT_UART2 (15 + IH2_BASE)
-#define INT_BT_MCSI1TX (16 + IH2_BASE)
-#define INT_BT_MCSI1RX (17 + IH2_BASE)
-#define INT_SOSSI_MATCH (19 + IH2_BASE)
-#define INT_USB_W2FC (20 + IH2_BASE)
-#define INT_1WIRE (21 + IH2_BASE)
-#define INT_OS_TIMER (22 + IH2_BASE)
-#define INT_MMC (23 + IH2_BASE)
-#define INT_GAUGE_32K (24 + IH2_BASE)
-#define INT_RTC_TIMER (25 + IH2_BASE)
-#define INT_RTC_ALARM (26 + IH2_BASE)
-#define INT_MEM_STICK (27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU (28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC (0 + IH2_BASE)
-#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
-#define INT_1610_USB_OTG (8 + IH2_BASE)
-#define INT_1610_SoSSI (9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
-#define INT_1610_DSP_MMU (28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
-#define INT_1610_STI (32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
-#define INT_1610_GPTIMER3 (34 + IH2_BASE)
-#define INT_1610_GPTIMER4 (35 + IH2_BASE)
-#define INT_1610_GPTIMER5 (36 + IH2_BASE)
-#define INT_1610_GPTIMER6 (37 + IH2_BASE)
-#define INT_1610_GPTIMER7 (38 + IH2_BASE)
-#define INT_1610_GPTIMER8 (39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
-#define INT_1610_MMC2 (42 + IH2_BASE)
-#define INT_1610_CF (43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
-#define INT_1610_SPI (49 + IH2_BASE)
-#define INT_1610_DMA_CH6 (53 + IH2_BASE)
-#define INT_1610_DMA_CH7 (54 + IH2_BASE)
-#define INT_1610_DMA_CH8 (55 + IH2_BASE)
-#define INT_1610_DMA_CH9 (56 + IH2_BASE)
-#define INT_1610_DMA_CH10 (57 + IH2_BASE)
-#define INT_1610_DMA_CH11 (58 + IH2_BASE)
-#define INT_1610_DMA_CH12 (59 + IH2_BASE)
-#define INT_1610_DMA_CH13 (60 + IH2_BASE)
-#define INT_1610_DMA_CH14 (61 + IH2_BASE)
-#define INT_1610_DMA_CH15 (62 + IH2_BASE)
-#define INT_1610_NAND (63 + IH2_BASE)
-#define INT_1610_SHA1MD5 (91 + IH2_BASE)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
-#define INT_7XX_CFCD (2 + IH2_BASE)
-#define INT_7XX_CFIREQ (3 + IH2_BASE)
-#define INT_7XX_I2C (4 + IH2_BASE)
-#define INT_7XX_PCC (5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
-#define INT_7XX_VLYNQ (9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
-#define INT_7XX_McBSP1TX (11 + IH2_BASE)
-#define INT_7XX_McBSP1RX (12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
-#define INT_7XX_MCSI (16 + IH2_BASE)
-#define INT_7XX_uWireTX (17 + IH2_BASE)
-#define INT_7XX_uWireRX (18 + IH2_BASE)
-#define INT_7XX_SMC_CD (19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
-#define INT_7XX_TIMER32K (22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
-#define INT_7XX_UPLD (24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
-#define INT_7XX_USB_GENI (29 + IH2_BASE)
-#define INT_7XX_USB_OTG (30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
-#define INT_7XX_RNG (32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
-#define INT_7XX_MPUIO (39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
-#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
-#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
-#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
-#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
-#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
-#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
-#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
-#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
-#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
-#define INT_7XX_NAND (63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ 7
-#define INT_24XX_SDMA_IRQ0 12
-#define INT_24XX_SDMA_IRQ1 13
-#define INT_24XX_SDMA_IRQ2 14
-#define INT_24XX_SDMA_IRQ3 15
-#define INT_24XX_CAM_IRQ 24
-#define INT_24XX_DSS_IRQ 25
-#define INT_24XX_MAIL_U0_MPU 26
-#define INT_24XX_DSP_UMA 27
-#define INT_24XX_DSP_MMU 28
-#define INT_24XX_GPIO_BANK1 29
-#define INT_24XX_GPIO_BANK2 30
-#define INT_24XX_GPIO_BANK3 31
-#define INT_24XX_GPIO_BANK4 32
-#define INT_24XX_GPIO_BANK5 33
-#define INT_24XX_MAIL_U3_MPU 34
-#define INT_24XX_GPTIMER1 37
-#define INT_24XX_GPTIMER2 38
-#define INT_24XX_GPTIMER3 39
-#define INT_24XX_GPTIMER4 40
-#define INT_24XX_GPTIMER5 41
-#define INT_24XX_GPTIMER6 42
-#define INT_24XX_GPTIMER7 43
-#define INT_24XX_GPTIMER8 44
-#define INT_24XX_GPTIMER9 45
-#define INT_24XX_GPTIMER10 46
-#define INT_24XX_GPTIMER11 47
-#define INT_24XX_GPTIMER12 48
-#define INT_24XX_SHA1MD5 51
-#define INT_24XX_MCBSP4_IRQ_TX 54
-#define INT_24XX_MCBSP4_IRQ_RX 55
-#define INT_24XX_I2C1_IRQ 56
-#define INT_24XX_I2C2_IRQ 57
-#define INT_24XX_HDQ_IRQ 58
-#define INT_24XX_MCBSP1_IRQ_TX 59
-#define INT_24XX_MCBSP1_IRQ_RX 60
-#define INT_24XX_MCBSP2_IRQ_TX 62
-#define INT_24XX_MCBSP2_IRQ_RX 63
-#define INT_24XX_SPI1_IRQ 65
-#define INT_24XX_SPI2_IRQ 66
-#define INT_24XX_UART1_IRQ 72
-#define INT_24XX_UART2_IRQ 73
-#define INT_24XX_UART3_IRQ 74
-#define INT_24XX_USB_IRQ_GEN 75
-#define INT_24XX_USB_IRQ_NISO 76
-#define INT_24XX_USB_IRQ_ISO 77
-#define INT_24XX_USB_IRQ_HGEN 78
-#define INT_24XX_USB_IRQ_HSOF 79
-#define INT_24XX_USB_IRQ_OTG 80
-#define INT_24XX_MCBSP5_IRQ_TX 81
-#define INT_24XX_MCBSP5_IRQ_RX 82
-#define INT_24XX_MMC_IRQ 83
-#define INT_24XX_MMC2_IRQ 86
-#define INT_24XX_MCBSP3_IRQ_TX 89
-#define INT_24XX_MCBSP3_IRQ_RX 90
-#define INT_24XX_SPI3_IRQ 91
-
-#define INT_243X_MCBSP2_IRQ 16
-#define INT_243X_MCBSP3_IRQ 17
-#define INT_243X_MCBSP4_IRQ 18
-#define INT_243X_MCBSP5_IRQ 19
-#define INT_243X_MCBSP1_IRQ 64
-#define INT_243X_HS_USB_MC 92
-#define INT_243X_HS_USB_DMA 93
-#define INT_243X_CARKIT_IRQ 94
-
-#define INT_34XX_BENCH_MPU_EMUL 3
-#define INT_34XX_ST_MCBSP2_IRQ 4
-#define INT_34XX_ST_MCBSP3_IRQ 5
-#define INT_34XX_SSM_ABORT_IRQ 6
-#define INT_34XX_SYS_NIRQ 7
-#define INT_34XX_D2D_FW_IRQ 8
-#define INT_34XX_L3_DBG_IRQ 9
-#define INT_34XX_L3_APP_IRQ 10
-#define INT_34XX_PRCM_MPU_IRQ 11
-#define INT_34XX_MCBSP1_IRQ 16
-#define INT_34XX_MCBSP2_IRQ 17
-#define INT_34XX_GPMC_IRQ 20
-#define INT_34XX_MCBSP3_IRQ 22
-#define INT_34XX_MCBSP4_IRQ 23
-#define INT_34XX_CAM_IRQ 24
-#define INT_34XX_MCBSP5_IRQ 27
-#define INT_34XX_GPIO_BANK1 29
-#define INT_34XX_GPIO_BANK2 30
-#define INT_34XX_GPIO_BANK3 31
-#define INT_34XX_GPIO_BANK4 32
-#define INT_34XX_GPIO_BANK5 33
-#define INT_34XX_GPIO_BANK6 34
-#define INT_34XX_USIM_IRQ 35
-#define INT_34XX_WDT3_IRQ 36
-#define INT_34XX_SPI4_IRQ 48
-#define INT_34XX_SHA1MD52_IRQ 49
-#define INT_34XX_FPKA_READY_IRQ 50
-#define INT_34XX_SHA1MD51_IRQ 51
-#define INT_34XX_RNG_IRQ 52
-#define INT_34XX_I2C3_IRQ 61
-#define INT_34XX_FPKA_ERROR_IRQ 64
-#define INT_34XX_PBIAS_IRQ 75
-#define INT_34XX_OHCI_IRQ 76
-#define INT_34XX_EHCI_IRQ 77
-#define INT_34XX_TLL_IRQ 78
-#define INT_34XX_PARTHASH_IRQ 79
-#define INT_34XX_MMC3_IRQ 94
-#define INT_34XX_GPT12_IRQ 95
-
-#define INT_36XX_UART4_IRQ 80
-
-#define INT_35XX_HECC0_IRQ 24
-#define INT_35XX_HECC1_IRQ 28
-#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
-#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
-#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
-#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
-#define INT_35XX_USBOTG_IRQ 71
-#define INT_35XX_UART4_IRQ 84
-#define INT_35XX_CCDC_VD0_IRQ 88
-#define INT_35XX_CCDC_VD1_IRQ 92
-#define INT_35XX_CCDC_VD2_IRQ 93
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES 192
-#define IH_GPIO_BASE (128 + IH2_BASE)
-#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS 24
-#else
-#define OMAP_FPGA_NR_IRQS 0
-#endif
-#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL4030_BASE_NR_IRQS 8
-#define TWL4030_PWR_NR_IRQS 8
-#else
-#define TWL4030_BASE_NR_IRQS 0
-#define TWL4030_PWR_NR_IRQS 0
-#endif
-#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
-#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
-#ifdef CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS 18
-#else
-#define TWL4030_GPIO_NR_IRQS 0
-#endif
-#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL6030_BASE_NR_IRQS 20
-#else
-#define TWL6030_BASE_NR_IRQS 0
-#endif
-#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
-
-#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END
-#ifdef CONFIG_TWL6040_CODEC
-#define TWL6040_CODEC_NR_IRQS 6
-#else
-#define TWL6040_CODEC_NR_IRQS 0
-#endif
-#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
-#define TWL_IRQ_END TWL4030_GPIO_IRQ_END
-#else
-#define TWL_IRQ_END TWL6040_CODEC_IRQ_END
-#endif
-
-/* GPMC related */
-#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END)
-#define OMAP_GPMC_NR_IRQS 8
-#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
-
-/* PRCM IRQ handler */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
-#define OMAP_PRCM_NR_IRQS 64
-#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
-#else
-#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
-#endif
-
-#define NR_IRQS OMAP_PRCM_IRQ_END
-
-#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
-
-#define INTCPS_NR_MIR_REGS 3
-#define INTCPS_NR_IRQS 96
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_FIQ
-#define FIQ_START 1024
-#endif
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/keypad.h
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-#ifndef CONFIG_ARCH_OMAP1
-#warning Please update the board to use matrix-keypad driver
-#define omap_readw(reg) 0
-#define omap_writew(val, reg) do {} while (0)
-#endif
-#include <linux/input/matrix_keypad.h>
-
-struct omap_kp_platform_data {
- int rows;
- int cols;
- const struct matrix_keymap_data *keymap_data;
- bool rep;
- unsigned long delay;
- bool dbounce;
- /* specific to OMAP242x*/
- unsigned int *row_gpios;
- unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. Two free bits, not used by neither row/col nor keynum,
- * must be available for use as group bits. The below GROUP_SHIFT
- * macro definition is based on some prior knowledge of the
- * matrix_keypad defined KEY() macro internals.
- */
-#define GROUP_SHIFT 14
-#define GROUP_0 (0 << GROUP_SHIFT)
-#define GROUP_1 (1 << GROUP_SHIFT)
-#define GROUP_2 (2 << GROUP_SHIFT)
-#define GROUP_3 (3 << GROUP_SHIFT)
-#define GROUP_MASK GROUP_3
-#if KEY_MAX & GROUP_MASK
-#error Group bits in conflict with keynum bits
-#endif
-
-
-#endif
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-
-/* L3 CONNIDs */
-/* Display Sub system (DSS) */
-#define OMAP2_L3_CORE_FW_CONNID_DSS 8
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-
-/* L3 Initiator IDs */
-/* Display Sub system (DSS) */
-#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-
-/* L4 CORE */
-/* Display Sub system (DSS) */
-#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
-#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
-#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
-#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
-#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-
-/* L4 CORE */
-#define OMAP3_L4_CORE_FW_I2C1_REGION 21
-#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
-#define OMAP3_L4_CORE_FW_I2C2_REGION 23
-#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
-#define OMAP3_L4_CORE_FW_I2C3_REGION 73
-#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
-
-/* Display Sub system (DSS) */
-#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2
-
-#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104
-#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3
-#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4
-#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4
-#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5
-#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6
-#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7
-#endif
+++ /dev/null
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
- MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
- MIPID_TEST_SUCCESS,
- MIPID_TEST_INVALID,
- MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
- int nreset_gpio;
- int data_lines;
-
- void (*shutdown)(struct mipid_platform_data *pdata);
- void (*set_bklight_level)(struct mipid_platform_data *pdata,
- int level);
- int (*get_bklight_level)(struct mipid_platform_data *pdata);
- int (*get_bklight_max)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-
-#define MCBSP_CONFIG_TYPE2 0x2
-#define MCBSP_CONFIG_TYPE3 0x3
-#define MCBSP_CONFIG_TYPE4 0x4
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
- void (*request)(unsigned int);
- void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
- struct omap_mcbsp_ops *ops;
- u16 buffer_size;
- u8 reg_size;
- u8 reg_step;
-
- /* McBSP platform and instance specific features */
- bool has_wakeup; /* Wakeup capability */
- bool has_ccr; /* Transceiver has configuration control registers */
- int (*enable_st_clock)(unsigned int, bool);
- int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
- int (*mux_signal)(struct device *dev, const char *signal, const char *src);
-};
-
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
- const char *sidetone;
-};
-
-#endif
+++ /dev/null
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
-struct omap2_mcspi_platform_config {
- unsigned short num_cs;
- unsigned int regs_offset;
-};
-
-struct omap2_mcspi_dev_attr {
- unsigned short num_chipselect;
-};
-
-struct omap2_mcspi_device_config {
- unsigned turbo_mode:1;
-};
-
-#endif
#include <linux/device.h>
#include <linux/mmc/host.h>
-#include <plat/board.h>
#include <plat/omap_hwmod.h>
#define OMAP15XX_NR_MMC 1
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- * For example, W8_1610_MMC2_DAT0, where:
- * - W8 = ball
- * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
- * - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
- .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
- .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
- .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
- .mux_reg = OMAP7XX_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
- .pull_reg = OMAP7XX_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
- .mux_reg = OMAP7XX_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
- pull_reg, pull_bit, pull_status, \
- pu_pd_reg, pu_pd_status, debug_status) \
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG(mux_reg, mode_offset, mode) \
- PULL_REG(pull_reg, pull_bit, pull_status) \
- PU_PD_REG(pu_pd_reg, pu_pd_status) \
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
- * not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- * as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
- pull_bit, pull_status, debug_status)\
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG_7XX(mux_reg, mode_offset, mode) \
- PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
- PU_PD_REG(NA, 0) \
-},
-
-struct pin_config {
- char *name;
- const unsigned int mux_reg;
- unsigned char debug;
-
- const unsigned char mask_offset;
- const unsigned char mask;
-
- const char *pull_name;
- const unsigned int pull_reg;
- const unsigned char pull_val;
- const unsigned char pull_bit;
-
- const char *pu_pd_name;
- const unsigned int pu_pd_reg;
- const unsigned char pu_pd_val;
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
- const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
- /* OMAP 730 keyboard */
- E2_7XX_KBR0,
- J7_7XX_KBR1,
- E1_7XX_KBR2,
- F3_7XX_KBR3,
- D2_7XX_KBR4,
- C2_7XX_KBC0,
- D3_7XX_KBC1,
- E4_7XX_KBC2,
- F4_7XX_KBC3,
- E3_7XX_KBC4,
-
- /* USB */
- AA17_7XX_USB_DM,
- W16_7XX_USB_PU_EN,
- W17_7XX_USB_VBUSI,
- W18_7XX_USB_DMCK_OUT,
- W19_7XX_USB_DCRST,
-
- /* MMC */
- MMC_7XX_CMD,
- MMC_7XX_CLK,
- MMC_7XX_DAT0,
-
- /* I2C */
- I2C_7XX_SCL,
- I2C_7XX_SDA,
-
- /* SPI */
- SPI_7XX_1,
- SPI_7XX_2,
- SPI_7XX_3,
- SPI_7XX_4,
- SPI_7XX_5,
- SPI_7XX_6,
-
- /* UART */
- UART_7XX_1,
- UART_7XX_2,
-};
-
-enum omap1xxx_index {
- /* UART1 (BT_UART_GATING)*/
- UART1_TX = 0,
- UART1_RTS,
-
- /* UART2 (COM_UART_GATING)*/
- UART2_TX,
- UART2_RX,
- UART2_CTS,
- UART2_RTS,
-
- /* UART3 (GIGA_UART_GATING) */
- UART3_TX,
- UART3_RX,
- UART3_CTS,
- UART3_RTS,
- UART3_CLKREQ,
- UART3_BCLK, /* 12MHz clock out */
- Y15_1610_UART3_RTS,
-
- /* PWT & PWL */
- PWT,
- PWL,
-
- /* USB master generic */
- R18_USB_VBUS,
- R18_1510_USB_GPIO0,
- W4_USB_PUEN,
- W4_USB_CLKO,
- W4_USB_HIGHZ,
- W4_GPIO58,
-
- /* USB1 master */
- USB1_SUSP,
- USB1_SEO,
- W13_1610_USB1_SE0,
- USB1_TXEN,
- USB1_TXD,
- USB1_VP,
- USB1_VM,
- USB1_RCV,
- USB1_SPEED,
- R13_1610_USB1_SPEED,
- R13_1710_USB1_SE0,
-
- /* USB2 master */
- USB2_SUSP,
- USB2_VP,
- USB2_TXEN,
- USB2_VM,
- USB2_RCV,
- USB2_SEO,
- USB2_TXD,
-
- /* OMAP-1510 GPIO */
- R18_1510_GPIO0,
- R19_1510_GPIO1,
- M14_1510_GPIO2,
-
- /* OMAP1610 GPIO */
- P18_1610_GPIO3,
- Y15_1610_GPIO17,
-
- /* OMAP-1710 GPIO */
- R18_1710_GPIO0,
- V2_1710_GPIO10,
- N21_1710_GPIO14,
- W15_1710_GPIO40,
-
- /* MPUIO */
- MPUIO2,
- N15_1610_MPUIO2,
- MPUIO4,
- MPUIO5,
- T20_1610_MPUIO5,
- W11_1610_MPUIO6,
- V10_1610_MPUIO7,
- W11_1610_MPUIO9,
- V10_1610_MPUIO10,
- W10_1610_MPUIO11,
- E20_1610_MPUIO13,
- U20_1610_MPUIO14,
- E19_1610_MPUIO15,
-
- /* MCBSP2 */
- MCBSP2_CLKR,
- MCBSP2_CLKX,
- MCBSP2_DR,
- MCBSP2_DX,
- MCBSP2_FSR,
- MCBSP2_FSX,
-
- /* MCBSP3 */
- MCBSP3_CLKX,
-
- /* Misc ballouts */
- BALLOUT_V8_ARMIO3,
- N20_HDQ,
-
- /* OMAP-1610 MMC2 */
- W8_1610_MMC2_DAT0,
- V8_1610_MMC2_DAT1,
- W15_1610_MMC2_DAT2,
- R10_1610_MMC2_DAT3,
- Y10_1610_MMC2_CLK,
- Y8_1610_MMC2_CMD,
- V9_1610_MMC2_CMDDIR,
- V5_1610_MMC2_DATDIR0,
- W19_1610_MMC2_DATDIR1,
- R18_1610_MMC2_CLKIN,
-
- /* OMAP-1610 External Trace Interface */
- M19_1610_ETM_PSTAT0,
- L15_1610_ETM_PSTAT1,
- L18_1610_ETM_PSTAT2,
- L19_1610_ETM_D0,
- J19_1610_ETM_D6,
- J18_1610_ETM_D7,
-
- /* OMAP16XX GPIO */
- P20_1610_GPIO4,
- V9_1610_GPIO7,
- W8_1610_GPIO9,
- N20_1610_GPIO11,
- N19_1610_GPIO13,
- P10_1610_GPIO22,
- V5_1610_GPIO24,
- AA20_1610_GPIO_41,
- W19_1610_GPIO48,
- M7_1610_GPIO62,
- V14_16XX_GPIO37,
- R9_16XX_GPIO18,
- L14_16XX_GPIO49,
-
- /* OMAP-1610 uWire */
- V19_1610_UWIRE_SCLK,
- U18_1610_UWIRE_SDI,
- W21_1610_UWIRE_SDO,
- N14_1610_UWIRE_CS0,
- P15_1610_UWIRE_CS3,
- N15_1610_UWIRE_CS1,
-
- /* OMAP-1610 SPI */
- U19_1610_SPIF_SCK,
- U18_1610_SPIF_DIN,
- P20_1610_SPIF_DIN,
- W21_1610_SPIF_DOUT,
- R18_1610_SPIF_DOUT,
- N14_1610_SPIF_CS0,
- N15_1610_SPIF_CS1,
- T19_1610_SPIF_CS2,
- P15_1610_SPIF_CS3,
-
- /* OMAP-1610 Flash */
- L3_1610_FLASH_CS2B_OE,
- M8_1610_FLASH_CS2B_WE,
-
- /* First MMC */
- MMC_CMD,
- MMC_DAT1,
- MMC_DAT2,
- MMC_DAT0,
- MMC_CLK,
- MMC_DAT3,
-
- /* OMAP-1710 MMC CMDDIR and DATDIR0 */
- M15_1710_MMC_CLKI,
- P19_1710_MMC_CMDDIR,
- P20_1710_MMC_DATDIR0,
-
- /* OMAP-1610 USB0 alternate pin configuration */
- W9_USB0_TXEN,
- AA9_USB0_VP,
- Y5_USB0_RCV,
- R9_USB0_VM,
- V6_USB0_TXD,
- W5_USB0_SE0,
- V9_USB0_SPEED,
- V9_USB0_SUSP,
-
- /* USB2 */
- W9_USB2_TXEN,
- AA9_USB2_VP,
- Y5_USB2_RCV,
- R9_USB2_VM,
- V6_USB2_TXD,
- W5_USB2_SE0,
-
- /* 16XX UART */
- R13_1610_UART1_TX,
- V14_16XX_UART1_RX,
- R14_1610_UART1_CTS,
- AA15_1610_UART1_RTS,
- R9_16XX_UART2_RX,
- L14_16XX_UART3_RX,
-
- /* I2C OMAP-1610 */
- I2C_SCL,
- I2C_SDA,
-
- /* Keypad */
- F18_1610_KBC0,
- D20_1610_KBC1,
- D19_1610_KBC2,
- E18_1610_KBC3,
- C21_1610_KBC4,
- G18_1610_KBR0,
- F19_1610_KBR1,
- H14_1610_KBR2,
- E20_1610_KBR3,
- E19_1610_KBR4,
- N19_1610_KBR5,
-
- /* Power management */
- T20_1610_LOW_PWR,
-
- /* MCLK Settings */
- V5_1710_MCLK_ON,
- V5_1710_MCLK_OFF,
- R10_1610_MCLK_ON,
- R10_1610_MCLK_OFF,
-
- /* CompactFlash controller */
- P11_1610_CF_CD2,
- R11_1610_CF_IOIS16,
- V10_1610_CF_IREQ,
- W10_1610_CF_RESET,
- W11_1610_CF_CD1,
-
- /* parallel camera */
- J15_1610_CAM_LCLK,
- J18_1610_CAM_D7,
- J19_1610_CAM_D6,
- J14_1610_CAM_D5,
- K18_1610_CAM_D4,
- K19_1610_CAM_D3,
- K15_1610_CAM_D2,
- K14_1610_CAM_D1,
- L19_1610_CAM_D0,
- L18_1610_CAM_VS,
- L15_1610_CAM_HS,
- M19_1610_CAM_RSTZ,
- Y15_1610_CAM_OUTCLK,
-
- /* serial camera */
- H19_1610_CAM_EXCLK,
- Y12_1610_CCP_CLKP,
- W13_1610_CCP_CLKM,
- W14_1610_CCP_DATAP,
- Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
- struct pin_config *pins;
- unsigned long size;
- int (*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/gpmc.h>
-#include <linux/mtd/partitions.h>
-
-enum nand_io {
- NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
- NAND_OMAP_POLLED, /* polled mode, without prefetch */
- NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
- NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
-};
-
-struct omap_nand_platform_data {
- int cs;
- struct mtd_partition *parts;
- struct gpmc_timings *gpmc_t;
- int nr_parts;
- bool dev_ready;
- int gpmc_irq;
- enum nand_io xfer_type;
- unsigned long phys_base;
- int devsize;
- enum omap_ecc ecc_opt;
-};
-
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE 4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
- return 0;
-}
-#endif
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
#include <linux/pm_qos.h>
-#include <plat/mux.h>
-
#define DRIVER_NAME "omap_uart"
/*
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct platform_device *);
- void (*set_noidle)(struct platform_device *);
- void (*enable_wakeup)(struct platform_device *, bool);
+ void (*set_forceidle)(struct device *);
+ void (*set_noidle)(struct device *);
+ void (*enable_wakeup)(struct device *, bool);
};
struct uart_omap_dma {
unsigned int rx_timeout;
};
-struct uart_omap_port {
- struct uart_port port;
- struct uart_omap_dma uart_dma;
- struct platform_device *pdev;
-
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char fcr;
- unsigned char efr;
- unsigned char dll;
- unsigned char dlh;
- unsigned char mdr1;
- unsigned char scr;
-
- int use_dma;
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
- unsigned int lsr_break_flag;
- unsigned char msr_saved_flags;
- char name[20];
- unsigned long port_activity;
- u32 context_loss_cnt;
- u32 errata;
- u8 wakeups_enabled;
-
- struct pm_qos_request pm_qos_request;
- u32 latency;
- u32 calc_latency;
- struct work_struct qos_work;
-};
-
#endif /* __OMAP_SERIAL_H__ */
+++ /dev/null
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE 0xE0000000
-#define OMAP1510_DSP_SIZE 0x28000
-#define OMAP1510_DSP_START 0xE0000000
-
-#define OMAP1510_DSPREG_BASE 0xE1000000
-#define OMAP1510_DSPREG_SIZE SZ_128K
-#define OMAP1510_DSPREG_START 0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE (0xfffed200)
-
-#endif /* __ASM_ARCH_OMAP15XX_H */
-
+++ /dev/null
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE 0xE0000000
-#define OMAP16XX_DSP_SIZE 0x28000
-#define OMAP16XX_DSP_START 0xE0000000
-
-#define OMAP16XX_DSPREG_BASE 0xE1000000
-#define OMAP16XX_DSPREG_SIZE SZ_128K
-#define OMAP16XX_DSPREG_START 0xE1000000
-
-#define OMAP16XX_SEC_BASE 0xFFFE4000
-#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE (0xfffe0000)
-#define OMAP_IH2_1_BASE (0xfffe0100)
-#define OMAP_IH2_2_BASE (0xfffe0200)
-#define OMAP_IH2_3_BASE (0xfffe0300)
-
-#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL 0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR (OMAP1_UART3_BASE + 0)
-#define UART3_THR (OMAP1_UART3_BASE + 0)
-#define UART3_DLL (OMAP1_UART3_BASE + 0)
-#define UART3_IER (OMAP1_UART3_BASE + 4)
-#define UART3_DLH (OMAP1_UART3_BASE + 4)
-#define UART3_IIR (OMAP1_UART3_BASE + 8)
-#define UART3_FCR (OMAP1_UART3_BASE + 8)
-#define UART3_EFR (OMAP1_UART3_BASE + 8)
-#define UART3_LCR (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)
-#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT 5
-#define WCLR_PTV_SHIFT 2
-
-#define WWPS_W_PEND_WSPR (1 << 4)
-#define WWPS_W_PEND_WTGR (1 << 3)
-#define WWPS_W_PEND_WLDR (1 << 2)
-#define WWPS_W_PEND_WCRR (1 << 1)
-#define WWPS_W_PEND_WCLR (1 << 0)
-
-#define WSPR_ENABLE_0 (0x0000bbbb)
-#define WSPR_ENABLE_1 (0x00004444)
-#define WSPR_DISABLE_0 (0x0000aaaa)
-#define WSPR_DISABLE_1 (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
-#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
-
-#endif /* __ASM_ARCH_OMAP16XX_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP2_H
-#define __ASM_ARCH_OMAP2_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE 0x48000000
-#define L4_WK_243X_BASE 0x49000000
-#define L3_24XX_BASE 0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE 0x40000000
-
-#define OMAP242X_CTRL_BASE L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE 0x68008000
-#define OMAP2420_GPMC_BASE 0x6800a000
-
-#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE 0x6C000000
-#define OMAP243X_SDRC_BASE 0x6D000000
-#define OMAP243X_GPMC_BASE 0x6E000000
-#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE 0x58000000
-#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE 0x5C000000
-#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-
-#endif /* __ASM_ARCH_OMAP2_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_OMAP3_H
-#define __ASM_ARCH_OMAP3_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE 0x48000000
-#define L4_WK_34XX_BASE 0x48300000
-#define L4_PER_34XX_BASE 0x49000000
-#define L4_EMU_34XX_BASE 0x54000000
-#define L3_34XX_BASE 0x68000000
-
-#define L4_WK_AM33XX_BASE 0x44C00000
-
-#define OMAP3430_32KSYNCT_BASE 0x48320000
-#define OMAP3430_CM_BASE 0x48004800
-#define OMAP3430_PRM_BASE 0x48306800
-#define OMAP343X_SMS_BASE 0x6C000000
-#define OMAP343X_SDRC_BASE 0x6D000000
-#define OMAP34XX_GPMC_BASE 0x6E000000
-#define OMAP343X_SCM_BASE 0x48002000
-#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE 0x48200000
-
-#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000)
-#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100)
-#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400)
-#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600)
-#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00)
-#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00)
-#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00)
-#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
-#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
-#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
-#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800)
-#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970)
-#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0)
-#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00)
-#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70)
-#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0)
-
-#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
-#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
-#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF)
-#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7)
-#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047)
-#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F)
-#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F)
-#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
-#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
-#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
-#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
-#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
-#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
-#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
-#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
-#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
-
-#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
-#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
-#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
-#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
-#define OMAP34XX_SR1_BASE 0x480C9000
-#define OMAP34XX_SR2_BASE 0x480CB000
-
-#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-
-/* Security */
-#define OMAP34XX_SEC_BASE (L4_34XX_BASE + 0xA0000)
-#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000)
-#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000)
-
-#endif /* __ASM_ARCH_OMAP3_H */
-
+++ /dev/null
-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
- struct omap_board_data *);
-#endif
+++ /dev/null
-/*:
- * Address mappings and base address for OMAP4 interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP44XX_H
-#define __ASM_ARCH_OMAP44XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-#define L4_44XX_BASE 0x4a000000
-#define L4_WK_44XX_BASE 0x4a300000
-#define L4_PER_44XX_BASE 0x48000000
-#define L4_EMU_44XX_BASE 0x54000000
-#define L3_44XX_BASE 0x44000000
-#define OMAP44XX_EMIF1_BASE 0x4c000000
-#define OMAP44XX_EMIF2_BASE 0x4d000000
-#define OMAP44XX_DMM_BASE 0x4e000000
-#define OMAP4430_32KSYNCT_BASE 0x4a304000
-#define OMAP4430_CM1_BASE 0x4a004000
-#define OMAP4430_CM_BASE OMAP4430_CM1_BASE
-#define OMAP4430_CM2_BASE 0x4a008000
-#define OMAP4430_PRM_BASE 0x4a306000
-#define OMAP4430_PRCM_MPU_BASE 0x48243000
-#define OMAP44XX_GPMC_BASE 0x50000000
-#define OMAP443X_SCM_BASE 0x4a002000
-#define OMAP443X_CTRL_BASE 0x4a100000
-#define OMAP44XX_IC_BASE 0x48200000
-#define OMAP44XX_IVA_INTC_BASE 0x40000000
-#define IRQ_SIR_IRQ 0x0040
-#define OMAP44XX_GIC_DIST_BASE 0x48241000
-#define OMAP44XX_GIC_CPU_BASE 0x48240100
-#define OMAP44XX_SCU_BASE 0x48240000
-#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
-#define OMAP44XX_L2CACHE_BASE 0x48242000
-#define OMAP44XX_WKUPGEN_BASE 0x48281000
-#define OMAP44XX_MCPDM_BASE 0x40132000
-#define OMAP44XX_MCPDM_L3_BASE 0x49032000
-#define OMAP44XX_SAR_RAM_BASE 0x4a326000
-
-#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
-#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
-
-#define OMAP4_MMU1_BASE 0x55082000
-#define OMAP4_MMU2_BASE 0x4A066000
-
-#define OMAP44XX_USBTLL_BASE (L4_44XX_BASE + 0x62000)
-#define OMAP44XX_UHH_CONFIG_BASE (L4_44XX_BASE + 0x64000)
-#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
-#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
-
-#endif /* __ASM_ARCH_OMAP44XX_H */
-
+++ /dev/null
-/*:
- * Address mappings and base address for OMAP5 interconnects
- * and peripherals.
- *
- * Copyright (C) 2012 Texas Instruments
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_SOC_OMAP54XX_H
-#define __ASM_SOC_OMAP54XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-#define L4_54XX_BASE 0x4a000000
-#define L4_WK_54XX_BASE 0x4ae00000
-#define L4_PER_54XX_BASE 0x48000000
-#define L3_54XX_BASE 0x44000000
-#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
-#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
-#define OMAP54XX_CM_CORE_BASE 0x4a008000
-#define OMAP54XX_PRM_BASE 0x4ae06000
-#define OMAP54XX_PRCM_MPU_BASE 0x48243000
-#define OMAP54XX_SCM_BASE 0x4a002000
-#define OMAP54XX_CTRL_BASE 0x4a002800
-
-#endif /* __ASM_SOC_OMAP555554XX_H */
+++ /dev/null
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE 0xE0000000
-#define OMAP7XX_DSP_SIZE 0x50000
-#define OMAP7XX_DSP_START 0xE0000000
-
-#define OMAP7XX_DSPREG_BASE 0xE1000000
-#define OMAP7XX_DSPREG_SIZE SZ_128K
-#define OMAP7XX_DSPREG_START 0xE1000000
-
-#define OMAP7XX_SPI1_BASE 0xfffc0800
-#define OMAP7XX_SPI2_BASE 0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE 0xfffe1000
-#define OMAP7XX_IO_CONF_0 0xfffe1070
-#define OMAP7XX_IO_CONF_1 0xfffe1074
-#define OMAP7XX_IO_CONF_2 0xfffe1078
-#define OMAP7XX_IO_CONF_3 0xfffe107c
-#define OMAP7XX_IO_CONF_4 0xfffe1080
-#define OMAP7XX_IO_CONF_5 0xfffe1084
-#define OMAP7XX_IO_CONF_6 0xfffe1088
-#define OMAP7XX_IO_CONF_7 0xfffe108c
-#define OMAP7XX_IO_CONF_8 0xfffe1090
-#define OMAP7XX_IO_CONF_9 0xfffe1094
-#define OMAP7XX_IO_CONF_10 0xfffe1098
-#define OMAP7XX_IO_CONF_11 0xfffe109c
-#define OMAP7XX_IO_CONF_12 0xfffe10a0
-#define OMAP7XX_IO_CONF_13 0xfffe10a4
-
-#define OMAP7XX_MODE_1 0xfffe1010
-#define OMAP7XX_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0 0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0 0xfffecc50
-#define OMAP7XX_FLASH_CFG_1 0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE 0xfffbb800
-#define OMAP7XX_DSP_M_CTL 0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP7XX_H */
-
* @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
* @_state: one of OMAP_DEVICE_STATE_* (see above)
* @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
*
* Integrates omap_hwmod data into Linux platform_device.
*
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
u32 _dev_wakeup_lat_limit;
+ unsigned long _driver_status;
u8 pm_lats_cnt;
s8 pm_lat_level;
u8 hwmods_cnt;
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);
extern int omap2430_hwmod_init(void);
extern int omap3xxx_hwmod_init(void);
extern int omap44xx_hwmod_init(void);
+extern int am33xx_hwmod_init(void);
extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define ONENAND_SYNC_READ (1 << 0)
-#define ONENAND_SYNC_READWRITE (1 << 1)
-
-struct onenand_freq_info {
- u16 maf_id;
- u16 dev_id;
- u16 ver_id;
-};
-
-struct omap_onenand_platform_data {
- int cs;
- int gpio_irq;
- struct mtd_partition *parts;
- int nr_parts;
- int (*onenand_setup)(void __iomem *, int *freq_ptr);
- int (*get_freq)(const struct onenand_freq_info *freq_info,
- bool *clk_dep);
- int dma_channel;
- u8 flags;
- u8 regulator_can_sleep;
- u8 skip_initial_unlocking;
-};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ CONFIG_OMAP_32K_TIMER_HZ
-#endif
+++ /dev/null
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- */
-struct omap_rproc_pdata {
- const char *name;
- const char *oh_name;
- const char *oh_name_opt;
- const char *firmware;
- const char *mbox_name;
- const struct rproc_ops *ops;
- int (*device_enable) (struct platform_device *pdev);
- int (*device_shutdown) (struct platform_device *pdev);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
+++ /dev/null
-/*
- * This file contains the address data for various TI81XX modules.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_TI81XX_H
-#define __ASM_ARCH_TI81XX_H
-
-#define L4_SLOW_TI81XX_BASE 0x48000000
-
-#define TI81XX_SCM_BASE 0x48140000
-#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
-#define TI81XX_PRCM_BASE 0x48180000
-
-#define TI81XX_ARM_INTC_BASE 0x48200000
-
-#endif /* __ASM_ARCH_TI81XX_H */
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
+++ /dev/null
-/*
- * OMAP Voltage Management Routines
- *
- * Copyright (C) 2011, Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
-#define __ARCH_ARM_OMAP_VOLTAGE_H
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal: The possible voltage value in uV
- * @sr_efuse_offs: The offset of the efuse register(from system
- * control module base address) from where to read
- * the n-target value for the smartreflex module.
- * @sr_errminlimit: Error min limit value for smartreflex. This value
- * differs at differnet opp and thus is linked
- * with voltage.
- * @vp_errorgain: Error gain value for the voltage processor. This
- * field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
- u32 volt_nominal;
- u32 sr_efuse_offs;
- u8 sr_errminlimit;
- u8 vp_errgain;
-};
-struct voltagedomain;
-
-struct voltagedomain *voltdm_lookup(const char *name);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt);
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
- if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
- || !arch_mux_cfg->cfg_reg) {
- printk(KERN_ERR "Invalid pin table\n");
- return -EINVAL;
- }
-
- mux_cfg = arch_mux_cfg;
-
- return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
- struct pin_config *reg;
-
- if (!cpu_class_is_omap1()) {
- printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
- index);
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (mux_cfg == NULL) {
- printk(KERN_ERR "Pin mux table not initialized\n");
- return -ENODEV;
- }
-
- if (index >= mux_cfg->size) {
- printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, mux_cfg->size);
- dump_stack();
- return -ENODEV;
- }
-
- reg = (struct pin_config *)&mux_cfg->pins[index];
-
- if (!mux_cfg->cfg_reg)
- return -ENODEV;
-
- return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x) do {} while(0)
-#endif /* CONFIG_OMAP_MUX */
};
if (t == -1)
- pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
};
if (r == 0)
- pr_debug("OMAP PM: remove min bus tput constraint: "
- "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+ pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+ dev_name(dev), agent_id);
else
- pr_debug("OMAP PM: add min bus tput constraint: "
- "dev %s for agent_id %d: rate %ld KiB\n",
+ pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
};
if (t == -1)
- pr_debug("OMAP PM: remove max device latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max device latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the device to a
};
if (t == -1)
- pr_debug("OMAP PM: remove max DMA latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max DMA latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux PM QOS params, this code should scan the
}
if (r == 0)
- pr_debug("OMAP PM: remove min clk rate constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add min clk rate constraint: "
- "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+ pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+ dev_name(dev), r);
/*
* Code in a real implementation should keep track of these
-
/*
* omap_device implementation
*
act_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, act_lat);
+ "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+ od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
dev_dbg(&od->pdev->dev,
- "new worst case activate latency "
- "%d: %llu\n",
+ "new worst case activate latency %d: %llu\n",
od->pm_lat_level, act_lat);
} else
dev_warn(&od->pdev->dev,
- "activate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "activate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, act_lat,
odpl->activate_lat);
}
deact_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, deact_lat);
+ "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+ od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
dev_dbg(&od->pdev->dev,
- "new worst case deactivate latency "
- "%d: %llu\n",
+ "new worst case deactivate latency %d: %llu\n",
od->pm_lat_level, deact_lat);
} else
dev_warn(&od->pdev->dev,
- "deactivate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "deactivate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, deact_lat,
odpl->deactivate_lat);
}
goto odbfd_exit1;
}
+ /* Fix up missing resource names */
+ for (i = 0; i < pdev->num_resources; i++) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->name == NULL)
+ r->name = dev_name(&pdev->dev);
+ }
+
if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
omap_device_disable_idle_on_suspend(pdev);
unsigned long event, void *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od;
switch (event) {
- case BUS_NOTIFY_ADD_DEVICE:
- if (pdev->dev.of_node)
- omap_device_build_from_dt(pdev);
- break;
-
case BUS_NOTIFY_DEL_DEVICE:
if (pdev->archdata.od)
omap_device_delete(pdev->archdata.od);
break;
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ /* fall through */
+ default:
+ od = to_omap_device(pdev);
+ if (od)
+ od->_driver_status = event;
}
return NOTIFY_DONE;
for (i = 0; i < od->hwmods_cnt; i++)
c += omap_hwmod_count_resources(od->hwmods[i]);
- pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+ pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+ od->pdev->name, c, od->hwmods_cnt);
return c;
}
return 0;
}
+/**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od. Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all. If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+ struct resource *res)
+{
+ int i, r;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+ res += r;
+ }
+
+ return 0;
+}
+
/**
* omap_device_alloc - allocate an omap_device
* @pdev: platform_device that will be included in this omap_device
od->hwmods = hwmods;
od->pdev = pdev;
+ res_count = omap_device_count_resources(od);
/*
- * HACK: Ideally the resources from DT should match, and hwmod
- * should just add the missing ones. Since the name is not
- * properly populated by DT, stick to hwmod resources only.
+ * DT Boot:
+ * OF framework will construct the resource structure (currently
+ * does for MEM & IRQ resource) and we should respect/use these
+ * resources, killing hwmod dependency.
+ * If pdev->num_resources > 0, we assume that MEM & IRQ resources
+ * have been allocated by OF layer already (through DTB).
+ *
+ * Non-DT Boot:
+ * Here, pdev->num_resources = 0, and we should get all the
+ * resources from hwmod.
+ *
+ * TODO: Once DMA resource is available from OF layer, we should
+ * kill filling any resources from hwmod.
*/
- if (pdev->num_resources && pdev->resource)
- dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
- __func__, pdev->num_resources);
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
- __func__, res_count);
+ if (res_count > pdev->num_resources) {
+ /* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
- omap_device_fill_resources(od, res);
+ /*
+ * If pdev->num_resources > 0, then assume that,
+ * MEM and IRQ resources will only come from DT and only
+ * fill DMA resource from hwmod layer.
+ */
+ if (pdev->num_resources && pdev->resource) {
+ dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, res_count);
+ memcpy(res, pdev->resource,
+ sizeof(struct resource) * pdev->num_resources);
+ _od_fill_dma_resources(od, &res[pdev->num_resources]);
+ } else {
+ dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+ __func__, res_count);
+ omap_device_fill_resources(od, res);
+ }
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
struct omap_device *od = to_omap_device(pdev);
int ret;
+ /* Don't attempt late suspend on a driver that is not bound */
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
+ return 0;
+
ret = pm_generic_suspend_noirq(dev);
if (!ret && !pm_runtime_status_suspended(dev)) {
return 0;
}
core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+
+ if (!od)
+ return 0;
+
+ /*
+ * If omap_device state is enabled, but has no driver bound,
+ * idle it.
+ */
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+ if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+ dev_warn(dev, "%s: enabled but no driver. Idling\n",
+ __func__);
+ omap_device_idle(pdev);
+ }
+ }
+
+ return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+ bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+ return 0;
+}
+late_initcall(omap_device_late_init);
#include <asm/mach/map.h>
#include <plat/sram.h>
-#include <plat/board.h>
#include <plat/cpu.h>
#include "sram.h"
static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
*/
static void __init omap_detect_sram(void)
{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
return;
#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
+ }
#endif
if (cpu_is_omap34xx()) {
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
- memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
/*
{
unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
- available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+ available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
if (size > available) {
pr_err("Not enough space in SRAM\n");
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <net/dsa.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <mach/bridge-regs.h>
/* Create a clkdev entry for a given device/clk */
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
/*
* GPIO unit register offsets.
+++ /dev/null
-#ifndef __PLAT_AUDIO_H
-#define __PLAT_AUDIO_H
-
-struct kirkwood_asoc_platform_data {
- int burst;
-};
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
-
-#include <linux/mbus.h>
-
-enum orion_ehci_phy_ver {
- EHCI_PHY_ORION,
- EHCI_PHY_DD,
- EHCI_PHY_KW,
- EHCI_PHY_NA,
-};
-
-struct orion_ehci_data {
- enum orion_ehci_phy_ver phy_version;
-};
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-orion/include/plat/gpio.h
- *
- * Marvell Orion SoC GPIO handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/irqdomain.h>
-/*
- * Orion-specific GPIO API extensions.
- */
-void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_blink(unsigned pin, int blink);
-int orion_gpio_led_blink_set(unsigned gpio, int state,
- unsigned long *delay_on, unsigned long *delay_off);
-
-#define GPIO_INPUT_OK (1 << 0)
-#define GPIO_OUTPUT_OK (1 << 1)
-void orion_gpio_set_valid(unsigned pin, int mode);
-
-/* Initialize gpiolib. */
-void __init orion_gpio_init(struct device_node *np,
- int gpio_base, int ngpio,
- void __iomem *base, int mask_offset,
- int secondary_irq_base,
- int irq[4]);
-
-void __init orion_gpio_of_init(int irq_gpio_base);
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-orion/include/plat/mv_xor.h
- *
- * Marvell XOR platform device data definition file.
- */
-
-#ifndef __PLAT_MV_XOR_H
-#define __PLAT_MV_XOR_H
-
-#include <linux/dmaengine.h>
-#include <linux/mbus.h>
-
-#define MV_XOR_SHARED_NAME "mv_xor_shared"
-#define MV_XOR_NAME "mv_xor"
-
-struct mv_xor_platform_data {
- struct platform_device *shared;
- int hw_id;
- dma_cap_mask_t cap_mask;
- size_t pool_size;
-};
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
-
-#include <linux/mbus.h>
-
-struct mvsdio_platform_data {
- unsigned int clock;
- int gpio_card_detect;
- int gpio_write_protect;
-};
-
-#endif
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/orion-gpio.h
+ *
+ * Marvell Orion SoC GPIO handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+/*
+ * Orion-specific GPIO API extensions.
+ */
+void orion_gpio_set_unused(unsigned pin);
+void orion_gpio_set_blink(unsigned pin, int blink);
+int orion_gpio_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off);
+
+#define GPIO_INPUT_OK (1 << 0)
+#define GPIO_OUTPUT_OK (1 << 1)
+void orion_gpio_set_valid(unsigned pin, int mode);
+
+/* Initialize gpiolib. */
+void __init orion_gpio_init(struct device_node *np,
+ int gpio_base, int ngpio,
+ void __iomem *base, int mask_offset,
+ int secondary_irq_base,
+ int irq[4]);
+
+void __init orion_gpio_of_init(int irq_gpio_base);
+#endif
+++ /dev/null
-/*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
-
-/*
- * Device bus NAND private data
- */
-struct orion_nand_data {
- struct mtd_partition *parts;
- int (*dev_ready)(struct mtd_info *mtd);
- u32 nr_parts;
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 width; /* buswidth */
- u8 chip_delay;
-};
-
-
-#endif
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <plat/irq.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
+#include <plat/orion-gpio.h>
#include <plat/mpp.h>
/* Address of the ith MPP control register */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS (8)
-#define MAX_MATRIX_KEY_COLS (8)
-#define MATRIX_ROW_SHIFT (3)
-#define MAX_DIRECT_KEY_NUM (8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- * _plus_ the number of rotary-encoder sensor inputs, this can be
- * left as 0 if only rotary encoders are enabled, the driver will
- * automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- * encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- * default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
- /* code map for the matrix keys */
- unsigned int matrix_key_rows;
- unsigned int matrix_key_cols;
- unsigned int *matrix_key_map;
- int matrix_key_map_size;
-
- /* direct keys */
- int direct_key_num;
- unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
- /* the key output may be low active */
- int direct_key_low_active;
- /* give board a chance to choose the start direct key */
- unsigned int direct_key_mask;
-
- /* rotary encoders 0 */
- int enable_rotary0;
- int rotary0_rel_code;
- int rotary0_up_key;
- int rotary0_down_key;
-
- /* rotary encoders 1 */
- int enable_rotary1;
- int rotary1_rel_code;
- int rotary1_up_key;
- int rotary1_down_key;
-
- /* key debounce interval */
- unsigned int debounce_interval;
-
- /* clear wakeup event requirement for pxa168 */
- void (*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
+++ /dev/null
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
- unsigned int tCH; /* Enable signal hold time */
- unsigned int tCS; /* Enable signal setup time */
- unsigned int tWH; /* ND_nWE high duration */
- unsigned int tWP; /* ND_nWE pulse time */
- unsigned int tRH; /* ND_nRE high duration */
- unsigned int tRP; /* ND_nRE pulse width */
- unsigned int tR; /* ND_nWE high to ND_nRE low for read */
- unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
- unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
- uint16_t read1;
- uint16_t read2;
- uint16_t program;
- uint16_t read_status;
- uint16_t read_id;
- uint16_t erase;
- uint16_t reset;
- uint16_t lock;
- uint16_t unlock;
- uint16_t lock_status;
-};
-
-struct pxa3xx_nand_flash {
- char *name;
- uint32_t chip_id;
- unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
- unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
- unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
- unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
- unsigned int num_blocks; /* Number of physical blocks in Flash */
-
- struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT (2)
-struct pxa3xx_nand_platform_data {
-
- /* the data flash bus is shared between the Static Memory
- * Controller and the Data Flash Controller, the arbiter
- * controls the ownership of the bus
- */
- int enable_arbiter;
-
- /* allow platform code to keep OBM/bootloader defined NFC config */
- int keep_config;
-
- /* indicate how many chip selects will be used */
- int num_cs;
-
- const struct mtd_partition *parts[NUM_CHIP_SELECT];
- unsigned int nr_parts[NUM_CHIP_SELECT];
-
- const struct pxa3xx_nand_flash * flash;
- size_t num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
#include <media/s5p_hdmi.h>
#include <asm/irq.h>
-#include <asm/pmu.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/fb.h>
#include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/usb-phy.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
static struct platform_device s5p_device_pmu = {
.name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
+ .id = -1,
.num_resources = ARRAY_SIZE(s5p_pmu_resource),
.resource = s5p_pmu_resource,
};
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
- void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
- unsigned int use_mpllin:1;
- unsigned int output_cdclk:1;
-
- unsigned int have_mic:1;
- unsigned int have_lout:1;
-
- int amp_gpio;
- int amp_gain[2];
-
- void (*startup)(void);
-};
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD 0
-#define S3C64XX_AC97_GPE 1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD 0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN (1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI (1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR (1 << 2)
-#define QUIRK_NEED_RSTCLR (1 << 3)
- /* Quirks of the I2S controller */
- u32 quirks;
-
- /*
- * Array of clock names that can be used to generate I2S signals.
- * Also corresponds to clocks of I2SMOD[10]
- */
- const char **src_clk;
- dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
- int (*cfg_gpio)(struct platform_device *);
- union {
- struct samsung_i2s i2s;
- } type;
-};
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
- /* 1:1 mapping between cfgpin and setcfg calls at the moment */
- s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+++ /dev/null
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
- const char *name;
- unsigned int mult;
- unsigned int div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
- struct s3c_hwmon_chcfg *in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
+++ /dev/null
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
-
-/**
- * struct s3c2410_platform_i2c - Platform data for s3c I2C.
- * @bus_num: The bus number to use (if possible).
- * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- * @slave_addr: The I2C address for the slave device (if enabled).
- * @frequency: The desired frequency in Hz of the bus. This is
- * guaranteed to not be exceeded. If the caller does
- * not care, use zero and the driver will select a
- * useful default.
- * @sda_delay: The delay (in ns) applied to SDA edges.
- * @cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
- int bus_num;
- unsigned int flags;
- unsigned int slave_addr;
- unsigned long frequency;
- unsigned int sda_delay;
-
- void (*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
+++ /dev/null
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
- unsigned int no_wprotect:1;
- unsigned int no_detect:1;
- unsigned int wprotect_invert:1;
- unsigned int detect_invert:1; /* set => detect active high */
- unsigned int use_dma:1;
-
- unsigned int gpio_detect;
- unsigned int gpio_wprotect;
- unsigned long ocr_avail;
- void (*set_power)(unsigned char power_mode,
- unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- * driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
- unsigned long clk_rate;
- u8 lanes;
- u8 alignment;
- u8 hs_settle;
- bool fixed_phy_vdd;
- int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- * false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc: Entirely disable ECC - Dangerous
- * @flash_bbt: Openmoko u-boot can create a Bad Block Table
- * Setting this flag will allow the kernel to
- * look for it at boot time and also skip the NAND
- * scan.
- * @options: Default value to set into 'struct nand_chip' options.
- * @nr_chips: Number of chips in this set
- * @nr_partitions: Number of partitions pointed to by @partitions
- * @name: Name of set (optional)
- * @nr_map: Map for low-layer logical to physical chip numbers (option)
- * @partitions: The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
- unsigned int disable_ecc:1;
- unsigned int flash_bbt:1;
-
- unsigned int options;
- int nr_chips;
- int nr_partitions;
- char *name;
- int *nr_map;
- struct mtd_partition *partitions;
- struct nand_ecclayout *ecc_layout;
-};
-
-struct s3c2410_platform_nand {
- /* timing information for controller, all times in nanoseconds */
-
- int tacls; /* time for active CLE/ALE to nWE/nOE */
- int twrph0; /* active time for nWE/nOE */
- int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
-
- unsigned int ignore_unset_ecc:1;
-
- int nr_sets;
- struct s3c2410_nand_set *sets;
-
- void (*select_chip)(struct s3c2410_nand_set *,
- int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- * Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
- u8 fb_delay;
- unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
- int src_clk_nr;
- int num_cs;
- int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- * initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
- int delay;
- int presc;
- int oversampling_shift;
- void (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * Changelog:
- * 14-Mar-2005 RTP Created file
- * 02-Aug-2005 RTP File rename
- * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
- * 18-Jan-2007 HMW Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
- S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
- S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
- S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
- void (*udc_command)(enum s3c2410_udc_cmd_e);
- void (*vbus_draw)(unsigned int ma);
-
- unsigned int pullup_pin;
- unsigned int pullup_pin_inverted;
-
- unsigned int vbus_pin;
- unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED (1)
-
-struct s3c2410_hcd_port {
- unsigned char flags;
- unsigned char power;
- unsigned char oc_status;
- unsigned char oc_changed;
-};
-
-struct s3c2410_hcd_info {
- struct usb_hcd *hcd;
- struct s3c2410_hcd_port port[2];
-
- void (*power_control)(int port, int to);
- void (*enable_oc)(struct s3c2410_hcd_info *, int on);
- void (*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
- if (info->report_oc != NULL) {
- (info->report_oc)(info, ports);
- }
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
#include <asm/mach/irq.h>
-#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
+#define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
#define CON_OFFSET 0x700
#define MASK_OFFSET 0x900
bank->chips[group - bank->start] = chip;
gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
- (void __iomem *)GPIO_BASE(chip),
+ GPIO_BASE(chip),
handle_level_irq);
if (!gc)
return -ENOMEM;
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_KEYBOARD_H
-#define __PLAT_KEYBOARD_H
-
-#include <linux/bitops.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/types.h>
-
-#define DECLARE_9x9_KEYMAP(_name) \
-int _name[] = { \
- KEY(0, 0, KEY_ESC), \
- KEY(0, 1, KEY_1), \
- KEY(0, 2, KEY_2), \
- KEY(0, 3, KEY_3), \
- KEY(0, 4, KEY_4), \
- KEY(0, 5, KEY_5), \
- KEY(0, 6, KEY_6), \
- KEY(0, 7, KEY_7), \
- KEY(0, 8, KEY_8), \
- KEY(1, 0, KEY_9), \
- KEY(1, 1, KEY_MINUS), \
- KEY(1, 2, KEY_EQUAL), \
- KEY(1, 3, KEY_BACKSPACE), \
- KEY(1, 4, KEY_TAB), \
- KEY(1, 5, KEY_Q), \
- KEY(1, 6, KEY_W), \
- KEY(1, 7, KEY_E), \
- KEY(1, 8, KEY_R), \
- KEY(2, 0, KEY_T), \
- KEY(2, 1, KEY_Y), \
- KEY(2, 2, KEY_U), \
- KEY(2, 3, KEY_I), \
- KEY(2, 4, KEY_O), \
- KEY(2, 5, KEY_P), \
- KEY(2, 6, KEY_LEFTBRACE), \
- KEY(2, 7, KEY_RIGHTBRACE), \
- KEY(2, 8, KEY_ENTER), \
- KEY(3, 0, KEY_LEFTCTRL), \
- KEY(3, 1, KEY_A), \
- KEY(3, 2, KEY_S), \
- KEY(3, 3, KEY_D), \
- KEY(3, 4, KEY_F), \
- KEY(3, 5, KEY_G), \
- KEY(3, 6, KEY_H), \
- KEY(3, 7, KEY_J), \
- KEY(3, 8, KEY_K), \
- KEY(4, 0, KEY_L), \
- KEY(4, 1, KEY_SEMICOLON), \
- KEY(4, 2, KEY_APOSTROPHE), \
- KEY(4, 3, KEY_GRAVE), \
- KEY(4, 4, KEY_LEFTSHIFT), \
- KEY(4, 5, KEY_BACKSLASH), \
- KEY(4, 6, KEY_Z), \
- KEY(4, 7, KEY_X), \
- KEY(4, 8, KEY_C), \
- KEY(5, 0, KEY_V), \
- KEY(5, 1, KEY_B), \
- KEY(5, 2, KEY_N), \
- KEY(5, 3, KEY_M), \
- KEY(5, 4, KEY_COMMA), \
- KEY(5, 5, KEY_DOT), \
- KEY(5, 6, KEY_SLASH), \
- KEY(5, 7, KEY_RIGHTSHIFT), \
- KEY(5, 8, KEY_KPASTERISK), \
- KEY(6, 0, KEY_LEFTALT), \
- KEY(6, 1, KEY_SPACE), \
- KEY(6, 2, KEY_CAPSLOCK), \
- KEY(6, 3, KEY_F1), \
- KEY(6, 4, KEY_F2), \
- KEY(6, 5, KEY_F3), \
- KEY(6, 6, KEY_F4), \
- KEY(6, 7, KEY_F5), \
- KEY(6, 8, KEY_F6), \
- KEY(7, 0, KEY_F7), \
- KEY(7, 1, KEY_F8), \
- KEY(7, 2, KEY_F9), \
- KEY(7, 3, KEY_F10), \
- KEY(7, 4, KEY_NUMLOCK), \
- KEY(7, 5, KEY_SCROLLLOCK), \
- KEY(7, 6, KEY_KP7), \
- KEY(7, 7, KEY_KP8), \
- KEY(7, 8, KEY_KP9), \
- KEY(8, 0, KEY_KPMINUS), \
- KEY(8, 1, KEY_KP4), \
- KEY(8, 2, KEY_KP5), \
- KEY(8, 3, KEY_KP6), \
- KEY(8, 4, KEY_KPPLUS), \
- KEY(8, 5, KEY_KP1), \
- KEY(8, 6, KEY_KP2), \
- KEY(8, 7, KEY_KP3), \
- KEY(8, 8, KEY_KP0), \
-}
-
-#define DECLARE_6x6_KEYMAP(_name) \
-int _name[] = { \
- KEY(0, 0, KEY_RESERVED), \
- KEY(0, 1, KEY_1), \
- KEY(0, 2, KEY_2), \
- KEY(0, 3, KEY_3), \
- KEY(0, 4, KEY_4), \
- KEY(0, 5, KEY_5), \
- KEY(1, 0, KEY_Q), \
- KEY(1, 1, KEY_W), \
- KEY(1, 2, KEY_E), \
- KEY(1, 3, KEY_R), \
- KEY(1, 4, KEY_T), \
- KEY(1, 5, KEY_Y), \
- KEY(2, 0, KEY_D), \
- KEY(2, 1, KEY_F), \
- KEY(2, 2, KEY_G), \
- KEY(2, 3, KEY_H), \
- KEY(2, 4, KEY_J), \
- KEY(2, 5, KEY_K), \
- KEY(3, 0, KEY_B), \
- KEY(3, 1, KEY_N), \
- KEY(3, 2, KEY_M), \
- KEY(3, 3, KEY_COMMA), \
- KEY(3, 4, KEY_DOT), \
- KEY(3, 5, KEY_SLASH), \
- KEY(4, 0, KEY_F6), \
- KEY(4, 1, KEY_F7), \
- KEY(4, 2, KEY_F8), \
- KEY(4, 3, KEY_F9), \
- KEY(4, 4, KEY_F10), \
- KEY(4, 5, KEY_NUMLOCK), \
- KEY(5, 0, KEY_KP2), \
- KEY(5, 1, KEY_KP3), \
- KEY(5, 2, KEY_KP0), \
- KEY(5, 3, KEY_KPDOT), \
- KEY(5, 4, KEY_RO), \
- KEY(5, 5, KEY_ZENKAKUHANKAKU), \
-}
-
-#define KEYPAD_9x9 0
-#define KEYPAD_6x6 1
-#define KEYPAD_2x2 2
-
-/**
- * struct kbd_platform_data - spear keyboard platform data
- * keymap: pointer to keymap data (table and size)
- * rep: enables key autorepeat
- * mode: choose keyboard support(9x9, 6x6, 2x2)
- * suspended_rate: rate at which keyboard would operate in suspended mode
- *
- * This structure is supposed to be used by platform code to supply
- * keymaps to drivers that implement keyboards.
- */
-struct kbd_platform_data {
- const struct matrix_keymap_data *keymap;
- bool rep;
- unsigned int mode;
- unsigned int suspended_rate;
-};
-
-#endif /* __PLAT_KEYBOARD_H */
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
--- /dev/null
+/*
+ * linux/arch/arm/plat-versatile/include/plat/platsmp.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void versatile_secondary_startup(void);
+extern void versatile_secondary_init(unsigned int cpu);
+extern int versatile_boot_secondary(unsigned int cpu, struct task_struct *idle);
#include <asm/smp_plat.h>
#include <asm/hardware/gic.h>
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __cpuinit versatile_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
stargate2 MACH_STARGATE2 STARGATE2 774
intelmote2 MACH_INTELMOTE2 INTELMOTE2 775
trizeps4 MACH_TRIZEPS4 TRIZEPS4 776
-pnx4008 MACH_PNX4008 PNX4008 782
cpuat91 MACH_CPUAT91 CPUAT91 787
iq81340sc MACH_IQ81340SC IQ81340SC 799
iq81340mc MACH_IQ81340MC IQ81340MC 801
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP
+ select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
KBUILD_AFLAGS += $(call cc-option,-mno-fdpic)
KBUILD_CFLAGS_MODULE += -mlong-calls
LDFLAGS += -m elf32bfin
-KALLSYMS += --symbol-prefix=_
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
#define raw_smp_processor_id() blackfin_core_id()
extern void bfin_relocate_coreb_l1_mem(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);
struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
-#define BFIN_IPI_TIMER 0
-#define BFIN_IPI_RESCHEDULE 1
-#define BFIN_IPI_CALL_FUNC 2
-#define BFIN_IPI_CPU_STOP 3
+enum ipi_message_type {
+ BFIN_IPI_TIMER,
+ BFIN_IPI_RESCHEDULE,
+ BFIN_IPI_CALL_FUNC,
+ BFIN_IPI_CALL_FUNC_SINGLE,
+ BFIN_IPI_CPU_STOP,
+};
struct blackfin_flush_data {
unsigned long start;
void *secondary_stack;
-
-struct smp_call_struct {
- void (*func)(void *info);
- void *info;
- int wait;
- cpumask_t *waitmask;
-};
-
static struct blackfin_flush_data smp_flush_data;
static DEFINE_SPINLOCK(stop_lock);
-struct ipi_message {
- unsigned long type;
- struct smp_call_struct call_struct;
-};
-
/* A magic number - stress test shows this is safe for common cases */
#define BFIN_IPI_MSGQ_LEN 5
/* Simple FIFO buffer, overflow leads to panic */
-struct ipi_message_queue {
- spinlock_t lock;
+struct ipi_data {
unsigned long count;
- unsigned long head; /* head of the queue */
- struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN];
+ unsigned long bits;
};
-static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue);
+static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
static void ipi_cpu_stop(unsigned int cpu)
{
blackfin_icache_flush_range(fdata->start, fdata->end);
}
-static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
-{
- int wait;
- void (*func)(void *info);
- void *info;
- func = msg->call_struct.func;
- info = msg->call_struct.info;
- wait = msg->call_struct.wait;
- func(info);
- if (wait) {
-#ifdef __ARCH_SYNC_CORE_DCACHE
- /*
- * 'wait' usually means synchronization between CPUs.
- * Invalidate D cache in case shared data was changed
- * by func() to ensure cache coherence.
- */
- resync_core_dcache();
-#endif
- cpumask_clear_cpu(cpu, msg->call_struct.waitmask);
- }
-}
-
/* Use IRQ_SUPPLE_0 to request reschedule.
* When returning from interrupt to user space,
* there is chance to reschedule */
static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
{
- struct ipi_message *msg;
- struct ipi_message_queue *msg_queue;
+ struct ipi_data *bfin_ipi_data;
unsigned int cpu = smp_processor_id();
- unsigned long flags;
+ unsigned long pending;
+ unsigned long msg;
platform_clear_ipi(cpu, IRQ_SUPPLE_1);
- msg_queue = &__get_cpu_var(ipi_msg_queue);
-
- spin_lock_irqsave(&msg_queue->lock, flags);
-
- while (msg_queue->count) {
- msg = &msg_queue->ipi_message[msg_queue->head];
- switch (msg->type) {
- case BFIN_IPI_TIMER:
- ipi_timer();
- break;
- case BFIN_IPI_RESCHEDULE:
- scheduler_ipi();
- break;
- case BFIN_IPI_CALL_FUNC:
- ipi_call_function(cpu, msg);
- break;
- case BFIN_IPI_CPU_STOP:
- ipi_cpu_stop(cpu);
- break;
- default:
- printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
- cpu, msg->type);
- break;
- }
- msg_queue->head++;
- msg_queue->head %= BFIN_IPI_MSGQ_LEN;
- msg_queue->count--;
+ bfin_ipi_data = &__get_cpu_var(bfin_ipi);
+
+ while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
+ msg = 0;
+ do {
+ msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
+ switch (msg) {
+ case BFIN_IPI_TIMER:
+ ipi_timer();
+ break;
+ case BFIN_IPI_RESCHEDULE:
+ scheduler_ipi();
+ break;
+ case BFIN_IPI_CALL_FUNC:
+ generic_smp_call_function_interrupt();
+ break;
+
+ case BFIN_IPI_CALL_FUNC_SINGLE:
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ case BFIN_IPI_CPU_STOP:
+ ipi_cpu_stop(cpu);
+ break;
+ }
+ } while (msg < BITS_PER_LONG);
+
+ smp_mb();
}
- spin_unlock_irqrestore(&msg_queue->lock, flags);
return IRQ_HANDLED;
}
-static void ipi_queue_init(void)
+static void bfin_ipi_init(void)
{
unsigned int cpu;
- struct ipi_message_queue *msg_queue;
+ struct ipi_data *bfin_ipi_data;
for_each_possible_cpu(cpu) {
- msg_queue = &per_cpu(ipi_msg_queue, cpu);
- spin_lock_init(&msg_queue->lock);
- msg_queue->count = 0;
- msg_queue->head = 0;
+ bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+ bfin_ipi_data->bits = 0;
+ bfin_ipi_data->count = 0;
}
}
-static inline void smp_send_message(cpumask_t callmap, unsigned long type,
- void (*func) (void *info), void *info, int wait)
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
{
unsigned int cpu;
- struct ipi_message_queue *msg_queue;
- struct ipi_message *msg;
- unsigned long flags, next_msg;
- cpumask_t waitmask; /* waitmask is shared by all cpus */
-
- cpumask_copy(&waitmask, &callmap);
- for_each_cpu(cpu, &callmap) {
- msg_queue = &per_cpu(ipi_msg_queue, cpu);
- spin_lock_irqsave(&msg_queue->lock, flags);
- if (msg_queue->count < BFIN_IPI_MSGQ_LEN) {
- next_msg = (msg_queue->head + msg_queue->count)
- % BFIN_IPI_MSGQ_LEN;
- msg = &msg_queue->ipi_message[next_msg];
- msg->type = type;
- if (type == BFIN_IPI_CALL_FUNC) {
- msg->call_struct.func = func;
- msg->call_struct.info = info;
- msg->call_struct.wait = wait;
- msg->call_struct.waitmask = &waitmask;
- }
- msg_queue->count++;
- } else
- panic("IPI message queue overflow\n");
- spin_unlock_irqrestore(&msg_queue->lock, flags);
+ struct ipi_data *bfin_ipi_data;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for_each_cpu(cpu, cpumask) {
+ bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+ smp_mb();
+ set_bit(msg, &bfin_ipi_data->bits);
+ bfin_ipi_data->count++;
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
}
- if (wait) {
- while (!cpumask_empty(&waitmask))
- blackfin_dcache_invalidate_range(
- (unsigned long)(&waitmask),
- (unsigned long)(&waitmask));
-#ifdef __ARCH_SYNC_CORE_DCACHE
- /*
- * Invalidate D cache in case shared data was changed by
- * other processors to ensure cache coherence.
- */
- resync_core_dcache();
-#endif
- }
+ local_irq_restore(flags);
}
-int smp_call_function(void (*func)(void *info), void *info, int wait)
+void arch_send_call_function_single_ipi(int cpu)
{
- cpumask_t callmap;
-
- preempt_disable();
- cpumask_copy(&callmap, cpu_online_mask);
- cpumask_clear_cpu(smp_processor_id(), &callmap);
- if (!cpumask_empty(&callmap))
- smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
- preempt_enable();
-
- return 0;
+ send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE);
}
-EXPORT_SYMBOL_GPL(smp_call_function);
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
- int wait)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
- unsigned int cpu = cpuid;
- cpumask_t callmap;
-
- if (cpu_is_offline(cpu))
- return 0;
- cpumask_clear(&callmap);
- cpumask_set_cpu(cpu, &callmap);
-
- smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
- return 0;
+ send_ipi(mask, BFIN_IPI_CALL_FUNC);
}
-EXPORT_SYMBOL_GPL(smp_call_function_single);
void smp_send_reschedule(int cpu)
{
- cpumask_t callmap;
- /* simply trigger an ipi */
-
- cpumask_clear(&callmap);
- cpumask_set_cpu(cpu, &callmap);
-
- smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0);
+ send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
return;
}
void smp_send_msg(const struct cpumask *mask, unsigned long type)
{
- smp_send_message(*mask, type, NULL, NULL, 0);
+ send_ipi(mask, type);
}
void smp_timer_broadcast(const struct cpumask *mask)
cpumask_copy(&callmap, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &callmap);
if (!cpumask_empty(&callmap))
- smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0);
+ send_ipi(&callmap, BFIN_IPI_CPU_STOP);
preempt_enable();
void __init smp_prepare_cpus(unsigned int max_cpus)
{
platform_prepare_cpus(max_cpus);
- ipi_queue_init();
+ bfin_ipi_init();
platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
}
{
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
}
}
/* the port is imaginary */
printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
+ tty_port_link_device(&state->port, hp_simserial_driver, 0);
retval = tty_register_driver(hp_simserial_driver);
if (retval) {
printk(KERN_ERR "Couldn't register simserial driver\n");
#include <asm/natfeat.h>
static int stderr_id;
+static struct tty_port nfcon_tty_port;
static struct tty_driver *nfcon_tty_driver;
static void nfputs(const char *str, unsigned int count)
{
int res;
+ tty_port_init(&nfcon_tty_port);
+
stderr_id = nf_get_id("NF_STDERR");
if (!stderr_id)
return -ENODEV;
nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+ tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
res = tty_register_driver(nfcon_tty_driver);
if (res) {
pr_err("failed to register nfcon tty driver\n");
{
int irq, res;
struct resource *res_mem;
- struct uart_port port;
+ struct uart_8250_port up;
/* All adaptors have an irq. */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- memset(&port, 0, sizeof(port));
+ memset(&up, 0, sizeof(up));
- port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- port.type = PORT_OCTEON;
- port.iotype = UPIO_MEM;
- port.regshift = 3;
- port.dev = &pdev->dev;
+ up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ up.port.type = PORT_OCTEON;
+ up.port.iotype = UPIO_MEM;
+ up.port.regshift = 3;
+ up.port.dev = &pdev->dev;
if (octeon_is_simulation())
/* Make simulator output fast*/
- port.uartclk = 115200 * 16;
+ up.port.uartclk = 115200 * 16;
else
- port.uartclk = octeon_get_io_clock_rate();
+ up.port.uartclk = octeon_get_io_clock_rate();
- port.serial_in = octeon_serial_in;
- port.serial_out = octeon_serial_out;
- port.irq = irq;
+ up.port.serial_in = octeon_serial_in;
+ up.port.serial_out = octeon_serial_out;
+ up.port.irq = irq;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem == NULL) {
dev_err(&pdev->dev, "found no memory resource\n");
return -ENXIO;
}
- port.mapbase = res_mem->start;
- port.membase = ioremap(res_mem->start, resource_size(res_mem));
+ up.port.mapbase = res_mem->start;
+ up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
- res = serial8250_register_port(&port);
+ res = serial8250_register_8250_port(&up);
return res >= 0 ? 0 : res;
}
}
};
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+ "in the linux-serial mailing list."
+
+/* The code bellow is a replacement of SC26XX to SCCNXP */
+#if 0
+#include <linux/platform_data/sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+ .reg_shift = 2,
+ .frequency = 3686400,
+ .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) |
+ MCTRL_SIG(RTS_OP, LINE_OP3) |
+ MCTRL_SIG(DSR_IP, LINE_IP5) |
+ MCTRL_SIG(DCD_IP, LINE_IP6),
+ .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) |
+ MCTRL_SIG(RTS_OP, LINE_OP1) |
+ MCTRL_SIG(DSR_IP, LINE_IP0) |
+ MCTRL_SIG(CTS_IP, LINE_IP1) |
+ MCTRL_SIG(DCD_IP, LINE_IP2) |
+ MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc2681_pdev = {
+ .name = "sc2681",
+ .resource = sc2xxx_rsrc,
+ .num_resources = ARRAY_SIZE(sc2xxx_rsrc),
+ .dev = {
+ .platform_data = &sccnxp_data,
+ },
+};
+#endif
+
static u32 a20r_ack_hwint(void)
{
u32 status = read_c0_status();
pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW |
TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops);
+ tty_port_link_device(&tty_port, pdc_console_tty_driver, 0);
err = tty_register_driver(pdc_console_tty_driver);
if (err) {
if (*offset)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val < oprofile_min_interval)
oprofile_hw_interval = oprofile_min_interval;
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0)
return -EINVAL;
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
line->valid = 1;
err = parse_chan_pair(new, line, n, opts, error_out);
if (!err) {
- struct device *d = tty_register_device(driver, n, NULL);
+ struct device *d = tty_port_register_device(&line->port,
+ driver, n, NULL);
if (IS_ERR(d)) {
*error_out = "Failed to register device";
err = PTR_ERR(d);
break;
case 28: /* Atom */
+ case 54: /* Cedariew */
memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
* to have an operational LBR which can freeze
* on PMU interrupt
*/
- if (boot_cpu_data.x86_mask < 10) {
+ if (boot_cpu_data.x86_model == 28
+ && boot_cpu_data.x86_mask < 10) {
pr_cont("LBR disabled due to erratum");
return;
}
if (do_microcode_update(buf, len) == 0)
ret = (ssize_t)len;
+ if (ret > 0)
+ perf_check_microcode();
+
mutex_unlock(µcode_mutex);
put_online_cpus();
if (val & 0x10) {
u8 edge_irr = s->irr & ~s->elcr;
int i;
- bool found;
+ bool found = false;
struct kvm_vcpu *vcpu;
s->init4 = val & 1;
static int alloc_apic_access_page(struct kvm *kvm)
{
+ struct page *page;
struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
if (r)
goto out;
- kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+ page = gfn_to_page(kvm, 0xfee00);
+ if (is_error_page(page)) {
+ r = -EFAULT;
+ goto out;
+ }
+
+ kvm->arch.apic_access_page = page;
out:
mutex_unlock(&kvm->slots_lock);
return r;
static int alloc_identity_pagetable(struct kvm *kvm)
{
+ struct page *page;
struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
if (r)
goto out;
- kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
- kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+ page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+ if (is_error_page(page)) {
+ r = -EFAULT;
+ goto out;
+ }
+
+ kvm->arch.ept_identity_pagetable = page;
out:
mutex_unlock(&kvm->slots_lock);
return r;
/* Exposing INVPCID only when PCID is exposed */
best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
if (vmx_invpcid_supported() &&
- best && (best->ecx & bit(X86_FEATURE_INVPCID)) &&
+ best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
guest_cpuid_has_pcid(vcpu)) {
exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
exec_control);
if (best)
- best->ecx &= ~bit(X86_FEATURE_INVPCID);
+ best->ebx &= ~bit(X86_FEATURE_INVPCID);
}
}
!kvm_event_needs_reinjection(vcpu);
}
-static void vapic_enter(struct kvm_vcpu *vcpu)
+static int vapic_enter(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
struct page *page;
if (!apic || !apic->vapic_addr)
- return;
+ return 0;
page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+ if (is_error_page(page))
+ return -EFAULT;
vcpu->arch.apic->vapic_page = page;
+ return 0;
}
static void vapic_exit(struct kvm_vcpu *vcpu)
}
vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
- vapic_enter(vcpu);
+ r = vapic_enter(vcpu);
+ if (r) {
+ srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
+ return r;
+ }
r = 1;
while (r > 0) {
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
+ tty_port_link_device(&serial_port, serial_driver, 0);
if (tty_register_driver(serial_driver))
panic("Couldn't register serial driver\n");
cryptlen += ivsize;
}
- if (sg_is_last(assoc)) {
+ if (req->assoclen && sg_is_last(assoc)) {
authenc_ahash_fn = crypto_authenc_ahash;
sg_init_table(asg, 2);
sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
cryptlen += ivsize;
}
- if (sg_is_last(assoc)) {
+ if (req->assoclen && sg_is_last(assoc)) {
authenc_ahash_fn = crypto_authenc_ahash;
sg_init_table(asg, 2);
sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
source "drivers/pwm/Kconfig"
+source "drivers/irqchip/Kconfig"
+
endmenu
# Rewritten to use lists instead of if-statements.
#
+obj-y += irqchip/
+
# GPIO must come after pinctrl as gpios may need to mux pins etc
obj-y += pinctrl/
obj-y += gpio/
} else if (result == ACPI_STATE_D3_HOT) {
result = ACPI_STATE_D3;
}
+
+ /*
+ * If we were unsure about the device parent's power state up to this
+ * point, the fact that the device is in D0 implies that the parent has
+ * to be in D0 too.
+ */
+ if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
+ && result == ACPI_STATE_D0)
+ device->parent->power.state = ACPI_STATE_D0;
+
*state = result;
out:
/* List of devices relying on this power resource */
struct acpi_power_resource_device *devices;
+ struct mutex devices_lock;
};
static struct list_head acpi_power_resource_list;
static int __acpi_power_on(struct acpi_power_resource *resource)
{
- struct acpi_power_resource_device *device_list = resource->devices;
acpi_status status = AE_OK;
status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
resource->name));
- while (device_list) {
- acpi_power_on_device(device_list->device);
-
- device_list = device_list->next;
- }
-
return 0;
}
static int acpi_power_on(acpi_handle handle)
{
int result = 0;
+ bool resume_device = false;
struct acpi_power_resource *resource = NULL;
+ struct acpi_power_resource_device *device_list;
result = acpi_power_get_context(handle, &resource);
if (result)
result = __acpi_power_on(resource);
if (result)
resource->ref_count--;
+ else
+ resume_device = true;
}
mutex_unlock(&resource->resource_lock);
+ if (!resume_device)
+ return result;
+
+ mutex_lock(&resource->devices_lock);
+
+ device_list = resource->devices;
+ while (device_list) {
+ acpi_power_on_device(device_list->device);
+ device_list = device_list->next;
+ }
+
+ mutex_unlock(&resource->devices_lock);
+
return result;
}
if (acpi_power_get_context(res_handle, &resource))
return;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
prev = NULL;
curr = resource->devices;
while (curr) {
prev = curr;
curr = curr->next;
}
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
}
/* Unlink dev from all power resources in _PR0 */
power_resource_device->device = powered_device;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
power_resource_device->next = resource->devices;
resource->devices = power_resource_device;
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
return 0;
}
return ret;
no_power_resource:
- printk(KERN_WARNING PREFIX "Invalid Power Resource to register!");
+ printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
return -ENODEV;
}
EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
resource->device = device;
mutex_init(&resource->resource_lock);
+ mutex_init(&resource->devices_lock);
strcpy(resource->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+ /* JMicron 362B and 362C have an AHCI function with IDE class code */
+ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+ { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(0x1b4b, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(0x1b4b, 0x9192),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(0x1b4b, 0x91a3),
.driver_data = board_ahci_yes_fbs },
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
/* Asmedia */
- { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
#include <linux/dmaengine.h>
#include <linux/ktime.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/platform.h>
#define DRV_NAME "ep93xx-ide"
#include <scsi/scsi_host.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include <mach/dma.h>
#define DRV_NAME "pata_pxa"
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/regs-ata.h>
#define DRV_NAME "pata_samsung_cf"
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* Apple-specific (Broadcom) devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
- { USB_DEVICE(0x0a5c, 0x21e3) },
- { USB_DEVICE(0x0a5c, 0x21e6) },
- { USB_DEVICE(0x0a5c, 0x21e8) },
- { USB_DEVICE(0x0a5c, 0x21f3) },
- { USB_DEVICE(0x0a5c, 0x21f4) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
{ USB_DEVICE(0x0489, 0xe033) },
+ /*Broadcom devices with vendor specific id */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
return status;
/* Disable Automatic RTSCTS */
- memcpy(&ktermios, tty->termios, sizeof(ktermios));
+ ktermios = tty->termios;
ktermios.c_cflag &= ~CRTSCTS;
tty_set_termios(tty, &ktermios);
static int register_serial_portandirq(unsigned int port, int irq)
{
- struct uart_port uart;
+ struct uart_8250_port uart;
switch ( port ) {
case 0x3f8:
} /* switch */
/* irq is okay */
- memset(&uart, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
- uart.uartclk = 1843200;
- uart.iobase = port;
- uart.irq = irq;
- uart.iotype = UPIO_PORT;
- uart.flags = UPF_SHARE_IRQ;
- return serial8250_register_port(&uart);
+ uart.port.uartclk = 1843200;
+ uart.port.iobase = port;
+ uart.port.irq = irq;
+ uart.port.iotype = UPIO_PORT;
+ uart.port.flags = UPF_SHARE_IRQ;
+ return serial8250_register_8250_port(&uart);
}
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
/* TODO:disable interrupts instead of reset to preserve signal states */
reset_device(info);
- if (!tty || tty->termios->c_cflag & HUPCL) {
+ if (!tty || tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
get_signals(info);
- if (info->netcount || (tty && (tty->termios->c_cflag & CREAD)))
+ if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
unsigned cflag;
int bits_per_char;
- if (!tty || !tty->termios)
+ if (!tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
if (I_IXOFF(tty))
mgslpc_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
mgslpc_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
tty->driver->name );
/* just return if nothing has changed */
- if ((tty->termios->c_cflag == old_termios->c_cflag)
- && (RELEVANT_IFLAG(tty->termios->c_iflag)
+ if ((tty->termios.c_cflag == old_termios->c_cflag)
+ && (RELEVANT_IFLAG(tty->termios.c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
#if SYNCLINK_GENERIC_HDLC
hdlcdev_init(info);
#endif
+ tty_port_register_device(&info->port, serial_driver, info->line,
+ &info->p_dev->dev);
}
static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
last->next_device = info->next_device;
else
mgslpc_device_list = info->next_device;
+ tty_unregister_device(serial_driver, info->line);
#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
.proc_fops = &mgslpc_proc_fops,
};
-static void synclink_cs_cleanup(void)
+static int __init synclink_cs_init(void)
{
int rc;
- while(mgslpc_device_list)
- mgslpc_remove_device(mgslpc_device_list);
-
- if (serial_driver) {
- if ((rc = tty_unregister_driver(serial_driver)))
- printk("%s(%d) failed to unregister tty driver err=%d\n",
- __FILE__,__LINE__,rc);
- put_tty_driver(serial_driver);
+ if (break_on_load) {
+ mgslpc_get_text_ptr();
+ BREAKPOINT();
}
- pcmcia_unregister_driver(&mgslpc_driver);
-}
-
-static int __init synclink_cs_init(void)
-{
- int rc;
-
- if (break_on_load) {
- mgslpc_get_text_ptr();
- BREAKPOINT();
- }
-
- if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
- return rc;
-
- serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
- if (!serial_driver) {
- rc = -ENOMEM;
- goto error;
- }
+ serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(serial_driver)) {
+ rc = PTR_ERR(serial_driver);
+ goto err;
+ }
- /* Initialize the tty_driver structure */
-
- serial_driver->driver_name = "synclink_cs";
- serial_driver->name = "ttySLP";
- serial_driver->major = ttymajor;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &mgslpc_ops);
-
- if ((rc = tty_register_driver(serial_driver)) < 0) {
- printk("%s(%d):Couldn't register serial driver\n",
- __FILE__,__LINE__);
- put_tty_driver(serial_driver);
- serial_driver = NULL;
- goto error;
- }
+ /* Initialize the tty_driver structure */
+ serial_driver->driver_name = "synclink_cs";
+ serial_driver->name = "ttySLP";
+ serial_driver->major = ttymajor;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_set_operations(serial_driver, &mgslpc_ops);
+
+ rc = tty_register_driver(serial_driver);
+ if (rc < 0) {
+ printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
+ __FILE__, __LINE__);
+ goto err_put_tty;
+ }
- printk("%s %s, tty major#%d\n",
- driver_name, driver_version,
- serial_driver->major);
+ rc = pcmcia_register_driver(&mgslpc_driver);
+ if (rc < 0)
+ goto err_unreg_tty;
- return 0;
+ printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
+ serial_driver->major);
-error:
- synclink_cs_cleanup();
- return rc;
+ return 0;
+err_unreg_tty:
+ tty_unregister_driver(serial_driver);
+err_put_tty:
+ put_tty_driver(serial_driver);
+err:
+ return rc;
}
static void __exit synclink_cs_exit(void)
{
- synclink_cs_cleanup();
+ pcmcia_unregister_driver(&mgslpc_driver);
+ tty_unregister_driver(serial_driver);
+ put_tty_driver(serial_driver);
}
module_init(synclink_cs_init);
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
- if (buf[i + 1] == '\n')
+ if ((i + 1) < count && buf[i + 1] == '\n')
i++;
break;
case '\n':
static int __init ttyprintk_init(void)
{
int ret = -ENOMEM;
- void *rp;
- ttyprintk_driver = alloc_tty_driver(1);
- if (!ttyprintk_driver)
- return ret;
+ tty_port_init(&tpk_port.port);
+ tpk_port.port.ops = &null_ops;
+ mutex_init(&tpk_port.port_write_mutex);
+
+ ttyprintk_driver = tty_alloc_driver(1,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_UNNUMBERED_NODE);
+ if (IS_ERR(ttyprintk_driver))
+ return PTR_ERR(ttyprintk_driver);
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
- ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+ tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0);
ret = tty_register_driver(ttyprintk_driver);
if (ret < 0) {
goto error;
}
- /* create our unnumbered device */
- rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
- ttyprintk_driver->name);
- if (IS_ERR(rp)) {
- printk(KERN_ERR "Couldn't create ttyprintk device\n");
- ret = PTR_ERR(rp);
- goto error;
- }
-
- tty_port_init(&tpk_port.port);
- tpk_port.port.ops = &null_ops;
- mutex_init(&tpk_port.port_write_mutex);
-
return 0;
error:
+ tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver);
ttyprintk_driver = NULL;
return ret;
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
+config COMMON_CLK_VERSATILE
+ bool "Clock driver for ARM Reference designs"
+ depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+ ---help---
+ Supports clocking on ARM Reference designs Integrator/AP,
+ Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+
+config COMMON_CLK_MAX77686
+ tristate "Clock driver for Maxim 77686 MFD"
+ depends on MFD_MAX77686
+ ---help---
+ This driver supports Maxim 77686 crystal oscillator clock.
+
endmenu
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
# SoCs specific
+obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
-obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
+obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_MMP) += mmp/
+endif
+obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_U8500) += ux500/
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
+obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+
+/*
+ * These are fixed clocks. They're probably not all root clocks and it may
+ * be possible to turn them on and off but until this is mapped out better
+ * it's the only way they can be used.
+ */
+void __init bcm2835_init_clocks(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT,
+ 250000000);
+ if (!clk)
+ pr_err("sys_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
+ 126000000);
+ if (!clk)
+ pr_err("apb_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
+ 3000000);
+ if (!clk)
+ pr_err("uart0_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20201000.uart");
+ if (ret)
+ pr_err("uart0_pclk alias not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
+ 125000000);
+ if (!clk)
+ pr_err("uart1_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20215000.uart");
+ if (ret)
+ pr_err("uart0_pclk alias not registered\n");
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <loongson1.h>
+
+#define OSC 33
+
+static DEFINE_SPINLOCK(_lock);
+
+static int ls1x_pll_clk_enable(struct clk_hw *hw)
+{
+ return 0;
+}
+
+static void ls1x_pll_clk_disable(struct clk_hw *hw)
+{
+}
+
+static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 pll, rate;
+
+ pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+ rate = ((12 + (pll & 0x3f)) * 1000000) +
+ ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
+ rate *= OSC;
+ rate >>= 1;
+
+ return rate;
+}
+
+static const struct clk_ops ls1x_pll_clk_ops = {
+ .enable = ls1x_pll_clk_enable,
+ .disable = ls1x_pll_clk_disable,
+ .recalc_rate = ls1x_pll_recalc_rate,
+};
+
+static struct clk * __init clk_register_pll(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags)
+{
+ struct clk_hw *hw;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the divider */
+ hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
+ if (!hw) {
+ pr_err("%s: could not allocate clk_hw\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &ls1x_pll_clk_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ hw->init = &init;
+
+ /* register the clock */
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ kfree(hw);
+
+ return clk;
+}
+
+void __init ls1x_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
+ clk_prepare_enable(clk);
+
+ clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
+ DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "cpu", NULL);
+
+ clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+ DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "dc", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+ DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "ahb", NULL);
+ clk_register_clkdev(clk, "stmmaceth", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "apb", NULL);
+ clk_register_clkdev(clk, "serial8250", NULL);
+}
--- /dev/null
+/*
+ * clk-max77686.c - Clock driver for Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/clkdev.h>
+
+enum {
+ MAX77686_CLK_AP = 0,
+ MAX77686_CLK_CP,
+ MAX77686_CLK_PMIC,
+ MAX77686_CLKS_NUM,
+};
+
+struct max77686_clk {
+ struct max77686_dev *iodev;
+ u32 mask;
+ struct clk_hw hw;
+ struct clk_lookup *lookup;
+};
+
+static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct max77686_clk, hw);
+}
+
+static int max77686_clk_prepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
+
+ return ret;
+}
+
+static void max77686_clk_unprepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return;
+
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
+}
+
+static int max77686_clk_is_enabled(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+ u32 val;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_read(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, &val);
+
+ if (ret < 0)
+ return -EINVAL;
+
+ return val & max77686->mask;
+}
+
+static struct clk_ops max77686_clk_ops = {
+ .prepare = max77686_clk_prepare,
+ .unprepare = max77686_clk_unprepare,
+ .is_enabled = max77686_clk_is_enabled,
+};
+
+static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
+ [MAX77686_CLK_AP] = {
+ .name = "32khz_ap",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_CP] = {
+ .name = "32khz_cp",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_PMIC] = {
+ .name = "32khz_pmic",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static int max77686_clk_register(struct device *dev,
+ struct max77686_clk *max77686)
+{
+ struct clk *clk;
+ struct clk_hw *hw = &max77686->hw;
+
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ return -ENOMEM;
+
+ max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
+ GFP_KERNEL);
+ if (IS_ERR(max77686->lookup))
+ return -ENOMEM;
+
+ max77686->lookup->con_id = hw->init->name;
+ max77686->lookup->clk = clk;
+
+ clkdev_add(max77686->lookup);
+
+ return 0;
+}
+
+static __devinit int max77686_clk_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_clk **max77686_clks;
+ int i, ret;
+
+ max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
+ * MAX77686_CLKS_NUM, GFP_KERNEL);
+ if (IS_ERR(max77686_clks))
+ return -ENOMEM;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct max77686_clk), GFP_KERNEL);
+ if (IS_ERR(max77686_clks[i]))
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i]->iodev = iodev;
+ max77686_clks[i]->mask = 1 << i;
+ max77686_clks[i]->hw.init = &max77686_clks_init[i];
+
+ ret = max77686_clk_register(&pdev->dev, max77686_clks[i]);
+ if (ret) {
+ switch (i) {
+ case MAX77686_CLK_AP:
+ dev_err(&pdev->dev, "Fail to register CLK_AP\n");
+ goto err_clk_ap;
+ break;
+ case MAX77686_CLK_CP:
+ dev_err(&pdev->dev, "Fail to register CLK_CP\n");
+ goto err_clk_cp;
+ break;
+ case MAX77686_CLK_PMIC:
+ dev_err(&pdev->dev, "Fail to register CLK_PMIC\n");
+ goto err_clk_pmic;
+ }
+ }
+ }
+
+ platform_set_drvdata(pdev, max77686_clks);
+
+ goto out;
+
+err_clk_pmic:
+ clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk);
+err_clk_cp:
+ clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk);
+err_clk_ap:
+out:
+ return ret;
+}
+
+static int __devexit max77686_clk_remove(struct platform_device *pdev)
+{
+ struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ clkdev_drop(max77686_clks[i]->lookup);
+ kfree(max77686_clks[i]->hw.clk);
+ }
+ return 0;
+}
+
+static const struct platform_device_id max77686_clk_id[] = {
+ { "max77686-clk", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_clk_id);
+
+static struct platform_driver max77686_clk_driver = {
+ .driver = {
+ .name = "max77686-clk",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_clk_probe,
+ .remove = __devexit_p(max77686_clk_remove),
+ .id_table = max77686_clk_id,
+};
+
+static int __init max77686_clk_init(void)
+{
+ return platform_driver_register(&max77686_clk_driver);
+}
+subsys_initcall(max77686_clk_init);
+
+static void __init max77686_clk_cleanup(void)
+{
+ platform_driver_unregister(&max77686_clk_driver);
+}
+module_exit(max77686_clk_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
+MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0014
+#define SIRFSOC_CLKC_CPU_CFG 0x0018
+#define SIRFSOC_CLKC_MEM_CFG 0x001c
+#define SIRFSOC_CLKC_SYS_CFG 0x0020
+#define SIRFSOC_CLKC_IO_CFG 0x0024
+#define SIRFSOC_CLKC_DSP_CFG 0x0028
+#define SIRFSOC_CLKC_GFX_CFG 0x002c
+#define SIRFSOC_CLKC_MM_CFG 0x0030
+#define SIRFSOC_CLKC_LCD_CFG 0x0034
+#define SIRFSOC_CLKC_MMC_CFG 0x0038
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
+#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
+#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
+#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
+#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
+#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
+#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
+
+static void *sirfsoc_clk_vbase, *sirfsoc_rsc_vbase;
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+/*
+ * SiRFprimaII clock controller
+ * - 2 oscillators: osc-26MHz, rtc-32.768KHz
+ * - 3 standard configurable plls: pll1, pll2 & pll3
+ * - 2 exclusive plls: usb phy pll and sata phy pll
+ * - 8 clock domains: cpu/cpudiv, mem/memdiv, sys/io, dsp, graphic, multimedia,
+ * display and sdphy.
+ * Each clock domain can select its own clock source from five clock sources,
+ * X_XIN, X_XINW, PLL1, PLL2 and PLL3. The domain clock is used as the source
+ * clock of the group clock.
+ * - dsp domain: gps, mf
+ * - io domain: dmac, nand, audio, uart, i2c, spi, usp, pwm, pulse
+ * - sys domain: security
+ */
+
+struct clk_pll {
+ struct clk_hw hw;
+ unsigned short regofs; /* register offset */
+};
+
+#define to_pllclk(_hw) container_of(_hw, struct clk_pll, hw)
+
+struct clk_dmn {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+ unsigned short regofs; /* register offset */
+};
+
+#define to_dmnclk(_hw) container_of(_hw, struct clk_dmn, hw)
+
+struct clk_std {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+};
+
+#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
+
+static int std_clk_is_enabled(struct clk_hw *hw);
+static int std_clk_enable(struct clk_hw *hw);
+static void std_clk_disable(struct clk_hw *hw);
+
+static inline unsigned long clkc_readl(unsigned reg)
+{
+ return readl(sirfsoc_clk_vbase + reg);
+}
+
+static inline void clkc_writel(u32 val, unsigned reg)
+{
+ writel(val, sirfsoc_clk_vbase + reg);
+}
+
+/*
+ * std pll
+ */
+
+static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long fin = parent_rate;
+ struct clk_pll *clk = to_pllclk(hw);
+ u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
+ SIRFSOC_CLKC_PLL1_CFG0;
+
+ if (clkc_readl(regcfg2) & BIT(2)) {
+ /* pll bypass mode */
+ return fin;
+ } else {
+ /* fout = fin * nf / nr / od */
+ u32 cfg0 = clkc_readl(clk->regofs);
+ u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
+ u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
+ u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
+ WARN_ON(fin % MHZ);
+ return fin / MHZ * nf / nr / od * MHZ;
+ }
+}
+
+static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin, nf, nr, od;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+ rate = rate - rate % MHZ;
+
+ nf = rate / MHZ;
+ if (nf > BIT(13))
+ nf = BIT(13);
+ if (nf < 1)
+ nf = 1;
+
+ fin = *parent_rate;
+
+ nr = fin / MHZ;
+ if (nr > BIT(6))
+ nr = BIT(6);
+ od = 1;
+
+ return fin * nf / (nr * od);
+}
+
+static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *clk = to_pllclk(hw);
+ unsigned long fin, nf, nr, od, reg;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+
+ nf = rate / MHZ;
+ if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
+ return -EINVAL;
+
+ fin = parent_rate;
+ BUG_ON(fin < MHZ);
+
+ nr = fin / MHZ;
+ BUG_ON((fin % MHZ) || nr > BIT(6));
+
+ od = 1;
+
+ reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
+ clkc_writel(reg, clk->regofs);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
+ clkc_writel((nf >> 1) - 1, reg);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
+ while (!(clkc_readl(reg) & BIT(6)))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops std_pll_ops = {
+ .recalc_rate = pll_clk_recalc_rate,
+ .round_rate = pll_clk_round_rate,
+ .set_rate = pll_clk_set_rate,
+};
+
+static const char *pll_clk_parents[] = {
+ "osc",
+};
+
+static struct clk_init_data clk_pll1_init = {
+ .name = "pll1",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll2_init = {
+ .name = "pll2",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll3_init = {
+ .name = "pll3",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_pll clk_pll1 = {
+ .regofs = SIRFSOC_CLKC_PLL1_CFG0,
+ .hw = {
+ .init = &clk_pll1_init,
+ },
+};
+
+static struct clk_pll clk_pll2 = {
+ .regofs = SIRFSOC_CLKC_PLL2_CFG0,
+ .hw = {
+ .init = &clk_pll2_init,
+ },
+};
+
+static struct clk_pll clk_pll3 = {
+ .regofs = SIRFSOC_CLKC_PLL3_CFG0,
+ .hw = {
+ .init = &clk_pll3_init,
+ },
+};
+
+/*
+ * usb uses specified pll
+ */
+
+static int usb_pll_clk_enable(struct clk_hw *hw)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg &= ~(SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ while (!(readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL) &
+ SIRFSOC_USBPHY_PLL_LOCK))
+ cpu_relax();
+
+ return 0;
+}
+
+static void usb_pll_clk_disable(struct clk_hw *clk)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg |= (SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+}
+
+static unsigned long usb_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ return (reg & SIRFSOC_USBPHY_PLL_BYPASS) ? parent_rate : 48*MHZ;
+}
+
+static struct clk_ops usb_pll_ops = {
+ .enable = usb_pll_clk_enable,
+ .disable = usb_pll_clk_disable,
+ .recalc_rate = usb_pll_clk_recalc_rate,
+};
+
+static struct clk_init_data clk_usb_pll_init = {
+ .name = "usb_pll",
+ .ops = &usb_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_hw usb_pll_clk_hw = {
+ .init = &clk_usb_pll_init,
+};
+
+/*
+ * clock domains - cpu, mem, sys/io, dsp, gfx
+ */
+
+static const char *dmn_clk_parents[] = {
+ "rtc",
+ "osc",
+ "pll1",
+ "pll2",
+ "pll3",
+};
+
+static u8 dmn_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return 4;
+
+ WARN_ON((cfg & (BIT(3) - 1)) > 4);
+
+ return cfg & (BIT(3) - 1);
+}
+
+static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return -EINVAL;
+
+ cfg &= ~(BIT(3) - 1);
+ clkc_writel(cfg | parent, clk->regofs);
+ /* BIT(3) - switching status: 1 - busy, 0 - done */
+ while (clkc_readl(clk->regofs) & BIT(3))
+ cpu_relax();
+
+ return 0;
+}
+
+static unsigned long dmn_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+
+{
+ unsigned long fin = parent_rate;
+ struct clk_dmn *clk = to_dmnclk(hw);
+
+ u32 cfg = clkc_readl(clk->regofs);
+
+ if (cfg & BIT(24)) {
+ /* fcd bypass mode */
+ return fin;
+ } else {
+ /*
+ * wait count: bit[19:16], hold count: bit[23:20]
+ */
+ u32 wait = (cfg >> 16) & (BIT(4) - 1);
+ u32 hold = (cfg >> 20) & (BIT(4) - 1);
+
+ return fin / (wait + hold + 2);
+ }
+}
+
+static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin;
+ unsigned ratio, wait, hold;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = *parent_rate;
+ ratio = fin / rate;
+
+ if (ratio < 2)
+ ratio = 2;
+ if (ratio > BIT(bits + 1))
+ ratio = BIT(bits + 1);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ return fin / (wait + hold + 2);
+}
+
+static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ unsigned long fin;
+ unsigned ratio, wait, hold, reg;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = parent_rate;
+ ratio = fin / rate;
+
+ if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
+ return -EINVAL;
+
+ WARN_ON(fin % rate);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ reg = clkc_readl(clk->regofs);
+ reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
+ reg |= (wait << 16) | (hold << 20) | BIT(25);
+ clkc_writel(reg, clk->regofs);
+
+ /* waiting FCD been effective */
+ while (clkc_readl(clk->regofs) & BIT(25))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops msi_ops = {
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_mem_init = {
+ .name = "mem",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mem = {
+ .regofs = SIRFSOC_CLKC_MEM_CFG,
+ .hw = {
+ .init = &clk_mem_init,
+ },
+};
+
+static struct clk_init_data clk_sys_init = {
+ .name = "sys",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_GATE,
+};
+
+static struct clk_dmn clk_sys = {
+ .regofs = SIRFSOC_CLKC_SYS_CFG,
+ .hw = {
+ .init = &clk_sys_init,
+ },
+};
+
+static struct clk_init_data clk_io_init = {
+ .name = "io",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_io = {
+ .regofs = SIRFSOC_CLKC_IO_CFG,
+ .hw = {
+ .init = &clk_io_init,
+ },
+};
+
+static struct clk_ops cpu_ops = {
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_cpu_init = {
+ .name = "cpu",
+ .ops = &cpu_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_PARENT,
+};
+
+static struct clk_dmn clk_cpu = {
+ .regofs = SIRFSOC_CLKC_CPU_CFG,
+ .hw = {
+ .init = &clk_cpu_init,
+ },
+};
+
+static struct clk_ops dmn_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+/* dsp, gfx, mm, lcd and vpp domain */
+
+static struct clk_init_data clk_dsp_init = {
+ .name = "dsp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_dsp = {
+ .regofs = SIRFSOC_CLKC_DSP_CFG,
+ .enable_bit = 0,
+ .hw = {
+ .init = &clk_dsp_init,
+ },
+};
+
+static struct clk_init_data clk_gfx_init = {
+ .name = "gfx",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_gfx = {
+ .regofs = SIRFSOC_CLKC_GFX_CFG,
+ .enable_bit = 8,
+ .hw = {
+ .init = &clk_gfx_init,
+ },
+};
+
+static struct clk_init_data clk_mm_init = {
+ .name = "mm",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mm = {
+ .regofs = SIRFSOC_CLKC_MM_CFG,
+ .enable_bit = 9,
+ .hw = {
+ .init = &clk_mm_init,
+ },
+};
+
+static struct clk_init_data clk_lcd_init = {
+ .name = "lcd",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_lcd = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 10,
+ .hw = {
+ .init = &clk_lcd_init,
+ },
+};
+
+static struct clk_init_data clk_vpp_init = {
+ .name = "vpp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_vpp = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 11,
+ .hw = {
+ .init = &clk_vpp_init,
+ },
+};
+
+static struct clk_init_data clk_mmc01_init = {
+ .name = "mmc01",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc01 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 59,
+ .hw = {
+ .init = &clk_mmc01_init,
+ },
+};
+
+static struct clk_init_data clk_mmc23_init = {
+ .name = "mmc23",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc23 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 60,
+ .hw = {
+ .init = &clk_mmc23_init,
+ },
+};
+
+static struct clk_init_data clk_mmc45_init = {
+ .name = "mmc45",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc45 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 61,
+ .hw = {
+ .init = &clk_mmc45_init,
+ },
+};
+
+/*
+ * peripheral controllers in io domain
+ */
+
+static int std_clk_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ return !!(clkc_readl(reg) & BIT(bit));
+}
+
+static int std_clk_enable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) | BIT(bit);
+ clkc_writel(val, reg);
+ return 0;
+}
+
+static void std_clk_disable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) & ~BIT(bit);
+ clkc_writel(val, reg);
+}
+
+static const char *std_clk_io_parents[] = {
+ "io",
+};
+
+static struct clk_ops ios_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+};
+
+static struct clk_init_data clk_dmac0_init = {
+ .name = "dmac0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac0 = {
+ .enable_bit = 32,
+ .hw = {
+ .init = &clk_dmac0_init,
+ },
+};
+
+static struct clk_init_data clk_dmac1_init = {
+ .name = "dmac1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac1 = {
+ .enable_bit = 33,
+ .hw = {
+ .init = &clk_dmac1_init,
+ },
+};
+
+static struct clk_init_data clk_nand_init = {
+ .name = "nand",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_nand = {
+ .enable_bit = 34,
+ .hw = {
+ .init = &clk_nand_init,
+ },
+};
+
+static struct clk_init_data clk_audio_init = {
+ .name = "audio",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_audio = {
+ .enable_bit = 35,
+ .hw = {
+ .init = &clk_audio_init,
+ },
+};
+
+static struct clk_init_data clk_uart0_init = {
+ .name = "uart0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart0 = {
+ .enable_bit = 36,
+ .hw = {
+ .init = &clk_uart0_init,
+ },
+};
+
+static struct clk_init_data clk_uart1_init = {
+ .name = "uart1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart1 = {
+ .enable_bit = 37,
+ .hw = {
+ .init = &clk_uart1_init,
+ },
+};
+
+static struct clk_init_data clk_uart2_init = {
+ .name = "uart2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart2 = {
+ .enable_bit = 38,
+ .hw = {
+ .init = &clk_uart2_init,
+ },
+};
+
+static struct clk_init_data clk_usp0_init = {
+ .name = "usp0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp0 = {
+ .enable_bit = 39,
+ .hw = {
+ .init = &clk_usp0_init,
+ },
+};
+
+static struct clk_init_data clk_usp1_init = {
+ .name = "usp1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp1 = {
+ .enable_bit = 40,
+ .hw = {
+ .init = &clk_usp1_init,
+ },
+};
+
+static struct clk_init_data clk_usp2_init = {
+ .name = "usp2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp2 = {
+ .enable_bit = 41,
+ .hw = {
+ .init = &clk_usp2_init,
+ },
+};
+
+static struct clk_init_data clk_vip_init = {
+ .name = "vip",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_vip = {
+ .enable_bit = 42,
+ .hw = {
+ .init = &clk_vip_init,
+ },
+};
+
+static struct clk_init_data clk_spi0_init = {
+ .name = "spi0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi0 = {
+ .enable_bit = 43,
+ .hw = {
+ .init = &clk_spi0_init,
+ },
+};
+
+static struct clk_init_data clk_spi1_init = {
+ .name = "spi1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi1 = {
+ .enable_bit = 44,
+ .hw = {
+ .init = &clk_spi1_init,
+ },
+};
+
+static struct clk_init_data clk_tsc_init = {
+ .name = "tsc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_tsc = {
+ .enable_bit = 45,
+ .hw = {
+ .init = &clk_tsc_init,
+ },
+};
+
+static struct clk_init_data clk_i2c0_init = {
+ .name = "i2c0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c0 = {
+ .enable_bit = 46,
+ .hw = {
+ .init = &clk_i2c0_init,
+ },
+};
+
+static struct clk_init_data clk_i2c1_init = {
+ .name = "i2c1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c1 = {
+ .enable_bit = 47,
+ .hw = {
+ .init = &clk_i2c1_init,
+ },
+};
+
+static struct clk_init_data clk_pwmc_init = {
+ .name = "pwmc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pwmc = {
+ .enable_bit = 48,
+ .hw = {
+ .init = &clk_pwmc_init,
+ },
+};
+
+static struct clk_init_data clk_efuse_init = {
+ .name = "efuse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_efuse = {
+ .enable_bit = 49,
+ .hw = {
+ .init = &clk_efuse_init,
+ },
+};
+
+static struct clk_init_data clk_pulse_init = {
+ .name = "pulse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pulse = {
+ .enable_bit = 50,
+ .hw = {
+ .init = &clk_pulse_init,
+ },
+};
+
+static const char *std_clk_dsp_parents[] = {
+ "dsp",
+};
+
+static struct clk_init_data clk_gps_init = {
+ .name = "gps",
+ .ops = &ios_ops,
+ .parent_names = std_clk_dsp_parents,
+ .num_parents = ARRAY_SIZE(std_clk_dsp_parents),
+};
+
+static struct clk_std clk_gps = {
+ .enable_bit = 1,
+ .hw = {
+ .init = &clk_gps_init,
+ },
+};
+
+static struct clk_init_data clk_mf_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_mf = {
+ .enable_bit = 2,
+ .hw = {
+ .init = &clk_mf_init,
+ },
+};
+
+static const char *std_clk_sys_parents[] = {
+ "sys",
+};
+
+static struct clk_init_data clk_security_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_sys_parents,
+ .num_parents = ARRAY_SIZE(std_clk_sys_parents),
+};
+
+static struct clk_std clk_security = {
+ .enable_bit = 19,
+ .hw = {
+ .init = &clk_security_init,
+ },
+};
+
+static const char *std_clk_usb_parents[] = {
+ "usb_pll",
+};
+
+static struct clk_init_data clk_usb0_init = {
+ .name = "usb0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb0 = {
+ .enable_bit = 16,
+ .hw = {
+ .init = &clk_usb0_init,
+ },
+};
+
+static struct clk_init_data clk_usb1_init = {
+ .name = "usb1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb1 = {
+ .enable_bit = 17,
+ .hw = {
+ .init = &clk_usb1_init,
+ },
+};
+
+static struct of_device_id clkc_ids[] = {
+ { .compatible = "sirf,prima2-clkc" },
+ {},
+};
+
+static struct of_device_id rsc_ids[] = {
+ { .compatible = "sirf,prima2-rsc" },
+ {},
+};
+
+void __init sirfsoc_of_clk_init(void)
+{
+ struct clk *clk;
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, clkc_ids);
+ if (!np)
+ panic("unable to find compatible clkc node in dtb\n");
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
+
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, rsc_ids);
+ if (!np)
+ panic("unable to find compatible rsc node in dtb\n");
+
+ sirfsoc_rsc_vbase = of_iomap(np, 0);
+ if (!sirfsoc_rsc_vbase)
+ panic("unable to map rsc registers\n");
+
+ of_node_put(np);
+
+
+ /* These are always available (RTC and 26MHz OSC)*/
+ clk = clk_register_fixed_rate(NULL, "rtc", NULL,
+ CLK_IS_ROOT, 32768);
+ BUG_ON(!clk);
+ clk = clk_register_fixed_rate(NULL, "osc", NULL,
+ CLK_IS_ROOT, 26000000);
+ BUG_ON(!clk);
+
+ clk = clk_register(NULL, &clk_pll1.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll2.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll3.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mem.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_sys.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_security.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b8030000.security");
+ clk = clk_register(NULL, &clk_dsp.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_gps.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a8010000.gps");
+ clk = clk_register(NULL, &clk_mf.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_io.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "io");
+ clk = clk_register(NULL, &clk_cpu.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "cpu");
+ clk = clk_register(NULL, &clk_uart0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0050000.uart");
+ clk = clk_register(NULL, &clk_uart1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0060000.uart");
+ clk = clk_register(NULL, &clk_uart2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0070000.uart");
+ clk = clk_register(NULL, &clk_tsc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0110000.tsc");
+ clk = clk_register(NULL, &clk_i2c0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.i2c");
+ clk = clk_register(NULL, &clk_i2c1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.i2c");
+ clk = clk_register(NULL, &clk_spi0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00d0000.spi");
+ clk = clk_register(NULL, &clk_spi1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0170000.spi");
+ clk = clk_register(NULL, &clk_pwmc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0130000.pwm");
+ clk = clk_register(NULL, &clk_efuse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0140000.efusesys");
+ clk = clk_register(NULL, &clk_pulse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0150000.pulsec");
+ clk = clk_register(NULL, &clk_dmac0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
+ clk = clk_register(NULL, &clk_dmac1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
+ clk = clk_register(NULL, &clk_nand.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0030000.nand");
+ clk = clk_register(NULL, &clk_audio.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0040000.audio");
+ clk = clk_register(NULL, &clk_usp0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0080000.usp");
+ clk = clk_register(NULL, &clk_usp1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0090000.usp");
+ clk = clk_register(NULL, &clk_usp2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00a0000.usp");
+ clk = clk_register(NULL, &clk_vip.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00c0000.vip");
+ clk = clk_register(NULL, &clk_gfx.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "98000000.graphics");
+ clk = clk_register(NULL, &clk_mm.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a0000000.multimedia");
+ clk = clk_register(NULL, &clk_lcd.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90010000.display");
+ clk = clk_register(NULL, &clk_vpp.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90020000.vpp");
+ clk = clk_register(NULL, &clk_mmc01.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc23.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc45.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &usb_pll_clk_hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_usb0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.usb");
+ clk = clk_register(NULL, &clk_usb1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.usb");
+}
}
EXPORT_SYMBOL_GPL(clk_enable);
-/**
- * clk_get_rate - return the rate of clk
- * @clk: the clk whose rate is being returned
- *
- * Simply returns the cached rate of the clk. Does not query the hardware. If
- * clk is NULL then returns 0.
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- mutex_lock(&prepare_lock);
- rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
-
- return rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
/**
* __clk_round_rate - round the given rate for a clk
* @clk: round the rate of this clock
__clk_recalc_rates(child, msg);
}
+/**
+ * clk_get_rate - return the rate of clk
+ * @clk: the clk whose rate is being returned
+ *
+ * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
+ * is set, which means a recalc_rate will be issued.
+ * If clk is NULL then returns 0.
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ mutex_lock(&prepare_lock);
+
+ if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
+ __clk_recalc_rates(clk, 0);
+
+ rate = __clk_get_rate(clk);
+ mutex_unlock(&prepare_lock);
+
+ return rate;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
/**
* __clk_speculate_rates
* @clk: first clk in the subtree
}
EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct clk_onecell_data *clk_data = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= clk_data->clk_num) {
+ pr_err("%s: invalid clock index %d\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clk_data->clks[idx];
+}
+EXPORT_SYMBOL_GPL(of_clk_src_onecell_get);
+
/**
* of_clk_add_provider() - Register a clock provider for a node
* @np: Device node pointer associated with clock provider
--- /dev/null
+#
+# Makefile for mmp specific clk
+#
+
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+
+obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
--- /dev/null
+/*
+ * mmp APB clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+#define APBC_POWER (1 << 7) /* Reset Generation */
+
+#define to_clk_apbc(hw) container_of(hw, struct clk_apbc, hw)
+struct clk_apbc {
+ struct clk_hw hw;
+ void __iomem *base;
+ unsigned int delay;
+ unsigned int flags;
+ spinlock_t *lock;
+};
+
+static int clk_apbc_prepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned int data;
+ unsigned long flags = 0;
+
+ /*
+ * It may share same register as MUX clock,
+ * and it will impact FNCLK enable. Spinlock is needed
+ */
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data |= APBC_POWER;
+ data |= APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data |= APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (!(apbc->flags & APBC_NO_BUS_CTRL)) {
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_RST;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+ }
+
+ return 0;
+}
+
+static void clk_apbc_unprepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data &= ~APBC_POWER;
+ data &= ~APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(10);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+}
+
+struct clk_ops clk_apbc_ops = {
+ .prepare = clk_apbc_prepare,
+ .unprepare = clk_apbc_unprepare,
+};
+
+struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name,
+ void __iomem *base, unsigned int delay,
+ unsigned int apbc_flags, spinlock_t *lock)
+{
+ struct clk_apbc *apbc;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apbc = kzalloc(sizeof(*apbc), GFP_KERNEL);
+ if (!apbc)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apbc_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apbc->base = base;
+ apbc->delay = delay;
+ apbc->flags = apbc_flags;
+ apbc->lock = lock;
+ apbc->hw.init = &init;
+
+ clk = clk_register(NULL, &apbc->hw);
+ if (IS_ERR(clk))
+ kfree(apbc);
+
+ return clk;
+}
--- /dev/null
+/*
+ * mmp AXI peripharal clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+#define to_clk_apmu(clk) (container_of(clk, struct clk_apmu, clk))
+struct clk_apmu {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 rst_mask;
+ u32 enable_mask;
+ spinlock_t *lock;
+};
+
+static int clk_apmu_enable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) | apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+
+ return 0;
+}
+
+static void clk_apmu_disable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) & ~apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+}
+
+struct clk_ops clk_apmu_ops = {
+ .enable = clk_apmu_enable,
+ .disable = clk_apmu_disable,
+};
+
+struct clk *mmp_clk_register_apmu(const char *name, const char *parent_name,
+ void __iomem *base, u32 enable_mask, spinlock_t *lock)
+{
+ struct clk_apmu *apmu;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apmu = kzalloc(sizeof(*apmu), GFP_KERNEL);
+ if (!apmu)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apmu_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apmu->base = base;
+ apmu->enable_mask = enable_mask;
+ apmu->lock = lock;
+ apmu->hw.init = &init;
+
+ clk = clk_register(NULL, &apmu->hw);
+
+ if (IS_ERR(clk))
+ kfree(apmu);
+
+ return clk;
+}
--- /dev/null
+/*
+ * mmp factor clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include "clk.h"
+/*
+ * It is M/N clock
+ *
+ * Fout from synthesizer can be given from two equations:
+ * numerator/denominator = Fin / (Fout * factor)
+ */
+
+#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw)
+struct clk_factor {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct clk_factor_masks *masks;
+ struct clk_factor_tbl *ftbl;
+ unsigned int ftbl_cnt;
+};
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ unsigned long rate = 0, prev_rate;
+ int i;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((*prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i == 0)
+ return rate;
+ else
+ return prev_rate;
+}
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ unsigned int val, num, den;
+
+ val = readl_relaxed(factor->base);
+
+ /* calculate numerator */
+ num = (val >> masks->num_shift) & masks->num_mask;
+
+ /* calculate denominator */
+ den = (val >> masks->den_shift) & masks->num_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * den) /
+ (num * factor->masks->factor)) * 10000;
+}
+
+/* Configures new clock rate*/
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ int i;
+ unsigned long val;
+ unsigned long prev_rate, rate = 0;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i > 0)
+ i--;
+
+ val = readl_relaxed(factor->base);
+
+ val &= ~(masks->num_mask << masks->num_shift);
+ val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+
+ val &= ~(masks->den_mask << masks->den_shift);
+ val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+
+ writel_relaxed(val, factor->base);
+
+ return 0;
+}
+
+static struct clk_ops clk_factor_ops = {
+ .recalc_rate = clk_factor_recalc_rate,
+ .round_rate = clk_factor_round_rate,
+ .set_rate = clk_factor_set_rate,
+};
+
+struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *base,
+ struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl,
+ unsigned int ftbl_cnt)
+{
+ struct clk_factor *factor;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!masks) {
+ pr_err("%s: must pass a clk_factor_mask\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ factor = kzalloc(sizeof(*factor), GFP_KERNEL);
+ if (!factor) {
+ pr_err("%s: could not allocate factor clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ factor->base = base;
+ factor->masks = masks;
+ factor->ftbl = ftbl;
+ factor->ftbl_cnt = ftbl_cnt;
+ factor->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_factor_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &factor->hw);
+ if (IS_ERR_OR_NULL(clk))
+ kfree(factor);
+
+ return clk;
+}
--- /dev/null
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static const char *uart_parent[] = {"uart_pll", "vctcxo"};
+static const char *ssp_parent[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
+
+void __init mmp2_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *vctcxo;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ vctcxo = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(vctcxo, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 800000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "usb_pll", NULL, CLK_IS_ROOT,
+ 480000000);
+ clk_register_clkdev(clk, "usb_pll", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll2", NULL, CLK_IS_ROOT,
+ 960000000);
+ clk_register_clkdev(clk, "pll2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_20", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 5);
+ clk_register_clkdev(clk, "pll1_20", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3", "pll1",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_2", "pll2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_4", "pll2_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_8", "pll2_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_16", "pll2_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_3", "pll2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll2_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_6", "pll2_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_12", "pll2_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_2", "vctcxo",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_4", "vctcxo_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_4", NULL);
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(clk, 14745600);
+ clk_register_clkdev(clk, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "vctcxo",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "vctcxo",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("twsi2", "vctcxo",
+ apbc_base + APBC_TWSI2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.2");
+
+ clk = mmp_clk_register_apbc("twsi3", "vctcxo",
+ apbc_base + APBC_TWSI3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.3");
+
+ clk = mmp_clk_register_apbc("twsi4", "vctcxo",
+ apbc_base + APBC_TWSI4, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.4");
+
+ clk = mmp_clk_register_apbc("twsi5", "vctcxo",
+ apbc_base + APBC_TWSI5, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.5");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "vctcxo",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "vctcxo",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "vctcxo",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "vctcxo",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "uart3_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART3, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("uart3", "uart3_mux",
+ apbc_base + APBC_UART3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.3");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp2_mux",
+ apbc_base + APBC_SSP2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp3_mux",
+ apbc_base + APBC_SSP3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "sdh_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 8, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh_mux", NULL);
+
+ clk = clk_register_divider(NULL, "sdh_div", "sdh_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_SDH0,
+ 10, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "sdh_div", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_div", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.0");
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh_div", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.1");
+
+ clk = mmp_clk_register_apmu("sdh2", "sdh_div", apmu_base + APMU_SDH2,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.2");
+
+ clk = mmp_clk_register_apmu("sdh3", "sdh_div", apmu_base + APMU_SDH3,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.3");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "disp0_div", "disp0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP0,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_div",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_divider(NULL, "disp0_sphy_div", "disp0_mux", 0,
+ apmu_base + APMU_DISP0, 15, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0_sphy", "disp0_sphy_div",
+ apmu_base + APMU_DISP0, 0x1024, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy.0", NULL);
+
+ clk = clk_register_mux(NULL, "disp1_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "disp1_div", "disp1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP1,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("disp1", "disp1_div",
+ apmu_base + APMU_DISP1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.1");
+
+ clk = mmp_clk_register_apmu("ccic_arbiter", "vctcxo",
+ apmu_base + APMU_CCIC0, 0x1800, &clk_lock);
+ clk_register_clkdev(clk, "ccic_arbiter", NULL);
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "ccic0_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 17, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic1_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "ccic1_div", "ccic1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 16, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("ccic1", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_phy", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.1");
+
+ clk = clk_register_divider(NULL, "ccic1_sphy_div", "ccic1_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_sphy", "ccic1_sphy_div",
+ apmu_base + APMU_CCIC1, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.1");
+}
--- /dev/null
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x81c
+#define APBC_SSP1 0x820
+#define APBC_SSP2 0x84c
+#define APBC_SSP3 0x858
+#define APBC_SSP4 0x85c
+#define APBC_TWSI1 0x6c
+#define APBC_UART2 0x70
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa168_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.4", NULL);
+
+ clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.4");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC,
+ 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB,
+ 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-disp.0");
+
+ clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "hclk", "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
--- /dev/null
+/*
+ * pxa910 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x18
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_SSP2 0x4c
+#define APBCP_TWSI1 0x28
+#define APBCP_UART2 0x1c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa910_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbcp_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+ if (apbcp_base == NULL) {
+ pr_err("error to ioremap APBC extension base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbcp_base + APBCP_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbcp_base + APBCP_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbcp_base + APBCP_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4",
+ apmu_base + APMU_DFC, 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux",
+ apmu_base + APMU_SDH0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux",
+ apmu_base + APMU_SDH1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll",
+ apmu_base + APMU_USB, 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll",
+ apmu_base + APMU_USB, 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
--- /dev/null
+#ifndef __MACH_MMP_CLK_H
+#define __MACH_MMP_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define APBC_NO_BUS_CTRL BIT(0)
+#define APBC_POWER_CTRL BIT(1)
+
+struct clk_factor_masks {
+ unsigned int factor;
+ unsigned int num_mask;
+ unsigned int den_mask;
+ unsigned int num_shift;
+ unsigned int den_shift;
+};
+
+struct clk_factor_tbl {
+ unsigned int num;
+ unsigned int den;
+};
+
+extern struct clk *mmp_clk_register_pll2(const char *name,
+ const char *parent_name, unsigned long flags);
+extern struct clk *mmp_clk_register_apbc(const char *name,
+ const char *parent_name, void __iomem *base,
+ unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
+extern struct clk *mmp_clk_register_apmu(const char *name,
+ const char *parent_name, void __iomem *base, u32 enable_mask,
+ spinlock_t *lock);
+extern struct clk *mmp_clk_register_factor(const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *base, struct clk_factor_masks *masks,
+ struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+#endif
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <mach/mx23.h>
#include "clk.h"
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] = {
- { .dev_id = "duart", },
- { .dev_id = "mxs-auart.0", },
- { .dev_id = "mxs-auart.1", },
- { .dev_id = "8006c000.serial", },
- { .dev_id = "8006e000.serial", },
- { .dev_id = "80070000.serial", },
-};
-
-static struct clk_lookup hbus_lookups[] = {
- { .dev_id = "imx23-dma-apbh", },
- { .dev_id = "80004000.dma-apbh", },
-};
-
-static struct clk_lookup xbus_lookups[] = {
- { .dev_id = "duart", .con_id = "apb_pclk"},
- { .dev_id = "80070000.serial", .con_id = "apb_pclk"},
- { .dev_id = "imx23-dma-apbx", },
- { .dev_id = "80024000.dma-apbx", },
-};
-
-static struct clk_lookup ssp_lookups[] = {
- { .dev_id = "imx23-mmc.0", },
- { .dev_id = "imx23-mmc.1", },
- { .dev_id = "80010000.ssp", },
- { .dev_id = "80034000.ssp", },
-};
-
-static struct clk_lookup lcdif_lookups[] = {
- { .dev_id = "imx23-fb", },
- { .dev_id = "80030000.lcdif", },
-};
-
-static struct clk_lookup gpmi_lookups[] = {
- { .dev_id = "imx23-gpmi-nand", },
- { .dev_id = "8000c000.gpmi-nand", },
-};
-
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", };
};
static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
static enum imx23_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
int __init mx23_clocks_init(void)
{
+ struct device_node *np;
int i;
clk_misc_init();
return PTR_ERR(clks[i]);
}
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+ if (np) {
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clks[clk32k], NULL, "timrot");
- clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
- clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
- clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
- clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
- clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups));
- clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
- clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <mach/mx28.h>
#include "clk.h"
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] = {
- { .dev_id = "duart", },
- { .dev_id = "mxs-auart.0", },
- { .dev_id = "mxs-auart.1", },
- { .dev_id = "mxs-auart.2", },
- { .dev_id = "mxs-auart.3", },
- { .dev_id = "mxs-auart.4", },
- { .dev_id = "8006a000.serial", },
- { .dev_id = "8006c000.serial", },
- { .dev_id = "8006e000.serial", },
- { .dev_id = "80070000.serial", },
- { .dev_id = "80072000.serial", },
- { .dev_id = "80074000.serial", },
-};
-
-static struct clk_lookup hbus_lookups[] = {
- { .dev_id = "imx28-dma-apbh", },
- { .dev_id = "80004000.dma-apbh", },
-};
-
-static struct clk_lookup xbus_lookups[] = {
- { .dev_id = "duart", .con_id = "apb_pclk"},
- { .dev_id = "80074000.serial", .con_id = "apb_pclk"},
- { .dev_id = "imx28-dma-apbx", },
- { .dev_id = "80024000.dma-apbx", },
-};
-
-static struct clk_lookup ssp0_lookups[] = {
- { .dev_id = "imx28-mmc.0", },
- { .dev_id = "80010000.ssp", },
-};
-
-static struct clk_lookup ssp1_lookups[] = {
- { .dev_id = "imx28-mmc.1", },
- { .dev_id = "80012000.ssp", },
-};
-
-static struct clk_lookup ssp2_lookups[] = {
- { .dev_id = "imx28-mmc.2", },
- { .dev_id = "80014000.ssp", },
-};
-
-static struct clk_lookup ssp3_lookups[] = {
- { .dev_id = "imx28-mmc.3", },
- { .dev_id = "80016000.ssp", },
-};
-
-static struct clk_lookup lcdif_lookups[] = {
- { .dev_id = "imx28-fb", },
- { .dev_id = "80030000.lcdif", },
-};
-
-static struct clk_lookup gpmi_lookups[] = {
- { .dev_id = "imx28-gpmi-nand", },
- { .dev_id = "8000c000.gpmi-nand", },
-};
-
-static struct clk_lookup fec_lookups[] = {
- { .dev_id = "imx28-fec.0", },
- { .dev_id = "imx28-fec.1", },
- { .dev_id = "800f0000.ethernet", },
- { .dev_id = "800f4000.ethernet", },
-};
-
-static struct clk_lookup can0_lookups[] = {
- { .dev_id = "flexcan.0", },
- { .dev_id = "80032000.can", },
-};
-
-static struct clk_lookup can1_lookups[] = {
- { .dev_id = "flexcan.1", },
- { .dev_id = "80034000.can", },
-};
-
-static struct clk_lookup saif0_lookups[] = {
- { .dev_id = "mxs-saif.0", },
- { .dev_id = "80042000.saif", },
-};
-
-static struct clk_lookup saif1_lookups[] = {
- { .dev_id = "mxs-saif.1", },
- { .dev_id = "80046000.saif", },
-};
-
static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", };
static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", };
};
static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
static enum imx28_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
int __init mx28_clocks_init(void)
{
+ struct device_node *np;
int i;
clk_misc_init();
return PTR_ERR(clks[i]);
}
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+ if (np) {
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clks[clk32k], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
- clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
- clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
- clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
- clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
- clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
- clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
- clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
- clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
- clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
- clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
- clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
- clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
- clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
- clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
- clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
- clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy");
- clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy");
- clk_register_clkdev(clks[usb0], NULL, "80080000.usb");
- clk_register_clkdev(clks[usb1], NULL, "80090000.usb");
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
--- /dev/null
+#
+# Makefile for ux500 clocks
+#
+
+# Clock types
+obj-y += clk-prcc.o
+obj-y += clk-prcmu.o
+
+# Clock definitions
+obj-y += u8500_clk.o
+obj-y += u9540_clk.o
+obj-y += u8540_clk.o
--- /dev/null
+/*
+ * PRCC clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <mach/hardware.h>
+
+#include "clk.h"
+
+#define PRCC_PCKEN 0x000
+#define PRCC_PCKDIS 0x004
+#define PRCC_KCKEN 0x008
+#define PRCC_KCKDIS 0x00C
+#define PRCC_PCKSR 0x010
+#define PRCC_KCKSR 0x014
+
+#define to_clk_prcc(_hw) container_of(_hw, struct clk_prcc, hw)
+
+struct clk_prcc {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 cg_sel;
+ int is_enabled;
+};
+
+/* PRCC clock operations. */
+
+static int clk_prcc_pclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKEN));
+ while (!(readl(clk->base + PRCC_PCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_pclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_kclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKEN));
+ while (!(readl(clk->base + PRCC_KCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_kclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+ return clk->is_enabled;
+}
+
+static struct clk_ops clk_prcc_pclk_ops = {
+ .enable = clk_prcc_pclk_enable,
+ .disable = clk_prcc_pclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk_ops clk_prcc_kclk_ops = {
+ .enable = clk_prcc_kclk_enable,
+ .disable = clk_prcc_kclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk *clk_reg_prcc(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags,
+ struct clk_ops *clk_prcc_ops)
+{
+ struct clk_prcc *clk;
+ struct clk_init_data clk_prcc_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcc: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcc), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcc: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->base = ioremap(phy_base, SZ_4K);
+ if (!clk->base)
+ goto free_clk;
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+
+ clk_prcc_init.name = name;
+ clk_prcc_init.ops = clk_prcc_ops;
+ clk_prcc_init.flags = flags;
+ clk_prcc_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcc_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcc_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto unmap_clk;
+
+ return clk_reg;
+
+unmap_clk:
+ iounmap(clk->base);
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcc: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_pclk_ops);
+}
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_kclk_ops);
+}
--- /dev/null
+/*
+ * PRCMU clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw)
+
+struct clk_prcmu {
+ struct clk_hw hw;
+ u8 cg_sel;
+ int is_enabled;
+};
+
+/* PRCMU clock operations. */
+
+static int clk_prcmu_prepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_request_clock(clk->cg_sel, true);
+}
+
+static void clk_prcmu_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ if (prcmu_request_clock(clk->cg_sel, false))
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static int clk_prcmu_enable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcmu_disable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 0;
+}
+
+static int clk_prcmu_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_enabled;
+}
+
+static unsigned long clk_prcmu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_clock_rate(clk->cg_sel);
+}
+
+static long clk_prcmu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_round_clock_rate(clk->cg_sel, rate);
+}
+
+static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_set_clock_rate(clk->cg_sel, rate);
+}
+
+static int request_ape_opp100(bool enable)
+{
+ static int reqs;
+ int err = 0;
+
+ if (enable) {
+ if (!reqs)
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ "clock", 100);
+ if (!err)
+ reqs++;
+ } else {
+ reqs--;
+ if (!reqs)
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ "clock");
+ }
+ return err;
+}
+
+static int clk_prcmu_opp_prepare(struct clk_hw *hw)
+{
+ int err;
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ err = request_ape_opp100(true);
+ if (err) {
+ pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
+ __func__, hw->init->name);
+ return err;
+ }
+
+ err = prcmu_request_clock(clk->cg_sel, true);
+ if (err)
+ request_ape_opp100(false);
+
+ return err;
+}
+
+static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ if (prcmu_request_clock(clk->cg_sel, false))
+ goto out_error;
+ if (request_ape_opp100(false))
+ goto out_error;
+ return;
+
+out_error:
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static struct clk_ops clk_prcmu_scalable_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+ .round_rate = clk_prcmu_round_rate,
+ .set_rate = clk_prcmu_set_rate,
+};
+
+static struct clk_ops clk_prcmu_gate_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_rate_ops = {
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_opp_gate_ops = {
+ .prepare = clk_prcmu_opp_prepare,
+ .unprepare = clk_prcmu_opp_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk *clk_reg_prcmu(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags,
+ struct clk_ops *clk_prcmu_ops)
+{
+ struct clk_prcmu *clk;
+ struct clk_init_data clk_prcmu_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcmu: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcmu), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcmu: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+ /* "rate" can be used for changing the initial frequency */
+ if (rate)
+ prcmu_set_clock_rate(cg_sel, rate);
+
+ clk_prcmu_init.name = name;
+ clk_prcmu_init.ops = clk_prcmu_ops;
+ clk_prcmu_init.flags = flags;
+ clk_prcmu_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcmu_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcmu_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto free_clk;
+
+ return clk_reg;
+
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcmu: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+ &clk_prcmu_scalable_ops);
+}
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_gate_ops);
+}
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_rate_ops);
+}
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_opp_gate_ops);
+}
--- /dev/null
+/*
+ * Clocks for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __UX500_CLK_H
+#define __UX500_CLK_H
+
+#include <linux/clk.h>
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+#endif /* __UX500_CLK_H */
--- /dev/null
+/*
+ * Clock definitions for u8500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8500_clk_init(void)
+{
+ struct prcmu_fw_version *fw_version;
+ const char *sgaclk_parent = NULL;
+ struct clk *clk;
+
+ /* Clock sources */
+ clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc0_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc1_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "ddr_pll", NULL);
+
+ /* FIXME: Add sys, ulp and int clocks here. */
+
+ clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+ 32768);
+ clk_register_clkdev(clk, "clk32k", NULL);
+ clk_register_clkdev(clk, NULL, "rtc-pl031");
+
+ /* PRCMU clocks */
+ fw_version = prcmu_get_fw_version();
+ if (fw_version != NULL) {
+ switch (fw_version->project) {
+ case PRCMU_FW_PROJECT_U8500_C2:
+ case PRCMU_FW_PROJECT_U8520:
+ case PRCMU_FW_PROJECT_U8420:
+ sgaclk_parent = "soc0_pll";
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (sgaclk_parent)
+ clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
+ PRCMU_SGACLK, 0);
+ else
+ clk = clk_reg_prcmu_gate("sgclk", NULL,
+ PRCMU_SGACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mali");
+
+ clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "UART");
+
+ clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP02");
+
+ clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP1");
+
+ clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "I2C");
+
+ clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "slim");
+
+ clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH1");
+
+ clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH2");
+
+ clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH3");
+
+ clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH5");
+
+ clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH6");
+
+ clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH7");
+
+ clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "lcd");
+ clk_register_clkdev(clk, "lcd", "mcde");
+
+ clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "bml");
+
+ clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "hdmi");
+ clk_register_clkdev(clk, "hdmi", "mcde");
+
+ clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apeat");
+
+ clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apetrace");
+
+ clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mcde");
+ clk_register_clkdev(clk, "mcde", "mcde");
+ clk_register_clkdev(clk, "dsisys", "dsilink.0");
+ clk_register_clkdev(clk, "dsisys", "dsilink.1");
+ clk_register_clkdev(clk, "dsisys", "dsilink.2");
+
+ clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "ipi2");
+
+ clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dsialt");
+
+ clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dma40.0");
+
+ clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "b2r2");
+ clk_register_clkdev(clk, NULL, "b2r2_core");
+ clk_register_clkdev(clk, NULL, "U8500-B2R2.0");
+
+ clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "tv");
+ clk_register_clkdev(clk, "tv", "mcde");
+
+ clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "SSP");
+
+ clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "rngclk");
+
+ clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "uicc");
+
+ /*
+ * FIXME: The MTU clocks might need some kind of "parent muxed join"
+ * and these have no K-clocks. For now, we ignore the missing
+ * connection to the corresponding P-clocks, p6_mtu0_clk and
+ * p6_mtu1_clk. Instead timclk is used which is the valid parent.
+ */
+ clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "sdmmc");
+
+
+ clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+ PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs2", "mcde");
+ clk_register_clkdev(clk, "dsihs2", "dsilink.2");
+
+
+ clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+ PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs0", "mcde");
+ clk_register_clkdev(clk, "dsihs0", "dsilink.0");
+
+ clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+ PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs1", "mcde");
+ clk_register_clkdev(clk, "dsihs1", "dsilink.1");
+
+ clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+ PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp0", "dsilink.0");
+ clk_register_clkdev(clk, "dsilp0", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+ PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp1", "dsilink.1");
+ clk_register_clkdev(clk, "dsilp1", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+ PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp2", "dsilink.2");
+ clk_register_clkdev(clk, "dsilp2", "mcde");
+
+ clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS,
+ CLK_IS_ROOT|CLK_GET_RATE_NOCACHE|
+ CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, NULL, "smp_twd");
+
+ /*
+ * FIXME: Add special handled PRCMU clocks here:
+ * 1. clk_arm, use PRCMU_ARMCLK.
+ * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+ * 3. ab9540_clkout1yuv, see clkout0yuv
+ */
+
+ /* PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
+ BIT(3), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
+ BIT(4), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
+ BIT(6), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, NULL, "spi3");
+
+ clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
+ BIT(8), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpioblock0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
+ BIT(10), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "spi2");
+
+ clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "spi1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pwl");
+
+ clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi4");
+
+ clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi1");
+
+
+ clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi3");
+
+ clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "spi0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+ clk_register_clkdev(clk, NULL, "gpio.6");
+ clk_register_clkdev(clk, NULL, "gpio.7");
+ clk_register_clkdev(clk, NULL, "gpioblock1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, NULL, "fsmc");
+
+ clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
+ BIT(1), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
+ BIT(3), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi5");
+
+ clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "gpio.4");
+ clk_register_clkdev(clk, NULL, "gpio.5");
+ clk_register_clkdev(clk, NULL, "gpioblock2");
+
+ clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "usb", "musb-ux500.0");
+
+ clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "gpio.8");
+ clk_register_clkdev(clk, NULL, "gpioblock3");
+
+ clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "cryp0");
+ clk_register_clkdev(clk, NULL, "cryp1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "hash0");
+
+ clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pka");
+
+ clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, NULL, "hash1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, NULL, "cfgreg");
+
+ clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
+ BIT(6), 0);
+ clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
+ BIT(7), 0);
+
+ /* PRCC K-clocks
+ *
+ * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
+ * by enabling just the K-clock, even if it is not a valid parent to
+ * the K-clock. Until drivers get fixed we might need some kind of
+ * "parent muxed join".
+ */
+
+ /* Periph1 */
+ clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart0");
+
+ clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart1");
+
+ clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
+ U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi0");
+
+ clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ /* FIXME: Redefinition of BIT(3). */
+ clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+
+ /* Periph2 */
+ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+ U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi4");
+
+ clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+ U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi1");
+
+ clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi3");
+
+ /* Note that rate is received from parent. */
+ clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+ U8500_CLKRST2_BASE, BIT(6),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+ clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+ U8500_CLKRST2_BASE, BIT(7),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+
+ /* Periph3 */
+ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+ U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi2");
+
+ clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+ U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+ U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart2");
+
+ clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi5");
+
+ /* Periph6 */
+ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
+ U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+}
--- /dev/null
+/*
+ * Clock definitions for u8540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8540_clk_init(void)
+{
+ /* register clocks here */
+}
--- /dev/null
+/*
+ * Clock definitions for u9540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u9540_clk_init(void)
+{
+ /* register clocks here */
+}
# Makefile for Versatile-specific clocks
obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
--- /dev/null
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(sys_vcoreg);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+static void realview_oscvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(sys_vcoreg) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, sys_lock);
+ writel(val, sys_vcoreg);
+ /* This locks the CM again */
+ writel(0, sys_lock);
+}
+
+static const struct icst_params realview_oscvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST307_VCO_MAX,
+ .vco_min = ICST307_VCO_MIN,
+ .vd_min = 4 + 8,
+ .vd_max = 511 + 8,
+ .rd_min = 1 + 2,
+ .rd_max = 127 + 2,
+ .s2div = icst307_s2div,
+ .idx2s = icst307_idx2s,
+};
+
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+ .params = &realview_oscvco_params,
+ .getvco = realview_oscvco_get,
+ .setvco = realview_oscvco_set,
+};
+
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+ struct clk *clk;
+
+ sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+ if (is_pb1176)
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+ else
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "dev:uart0");
+ clk_register_clkdev(clk, NULL, "dev:uart1");
+ clk_register_clkdev(clk, NULL, "dev:uart2");
+ clk_register_clkdev(clk, NULL, "fpga:kmi0");
+ clk_register_clkdev(clk, NULL, "fpga:kmi1");
+ clk_register_clkdev(clk, NULL, "fpga:mmc0");
+ clk_register_clkdev(clk, NULL, "dev:ssp0");
+ if (is_pb1176) {
+ /*
+ * UART3 is on the dev chip in PB1176
+ * UART4 only exists in PB1176
+ */
+ clk_register_clkdev(clk, NULL, "dev:uart3");
+ clk_register_clkdev(clk, NULL, "dev:uart4");
+ } else
+ clk_register_clkdev(clk, NULL, "fpga:uart3");
+
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock */
+ clk = icst_clk_register(NULL, &realview_icst_desc);
+ clk_register_clkdev(clk, NULL, "dev:clcd");
+ clk_register_clkdev(clk, NULL, "issp:clcd");
+}
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
+obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
--- /dev/null
+/*
+ * Copyright 2012 Simon Arlott
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/bcm2835_timer.h>
+#include <linux/bitops.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/sched_clock.h>
+#include <asm/irq.h>
+
+#define REG_CONTROL 0x00
+#define REG_COUNTER_LO 0x04
+#define REG_COUNTER_HI 0x08
+#define REG_COMPARE(n) (0x0c + (n) * 4)
+#define MAX_TIMER 3
+#define DEFAULT_TIMER 3
+
+struct bcm2835_timer {
+ void __iomem *control;
+ void __iomem *compare;
+ int match_mask;
+ struct clock_event_device evt;
+ struct irqaction act;
+};
+
+static void __iomem *system_clock __read_mostly;
+
+static u32 notrace bcm2835_sched_read(void)
+{
+ return readl_relaxed(system_clock);
+}
+
+static void bcm2835_time_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt_dev)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ default:
+ WARN(1, "%s: unhandled event mode %d\n", __func__, mode);
+ break;
+ }
+}
+
+static int bcm2835_time_set_next_event(unsigned long event,
+ struct clock_event_device *evt_dev)
+{
+ struct bcm2835_timer *timer = container_of(evt_dev,
+ struct bcm2835_timer, evt);
+ writel_relaxed(readl_relaxed(system_clock) + event,
+ timer->compare);
+ return 0;
+}
+
+static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
+{
+ struct bcm2835_timer *timer = dev_id;
+ void (*event_handler)(struct clock_event_device *);
+ if (readl_relaxed(timer->control) & timer->match_mask) {
+ writel_relaxed(timer->match_mask, timer->control);
+
+ event_handler = ACCESS_ONCE(timer->evt.event_handler);
+ if (event_handler)
+ event_handler(&timer->evt);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
+}
+
+static struct of_device_id bcm2835_time_match[] __initconst = {
+ { .compatible = "brcm,bcm2835-system-timer" },
+ {}
+};
+
+static void __init bcm2835_time_init(void)
+{
+ struct device_node *node;
+ void __iomem *base;
+ u32 freq;
+ int irq;
+ struct bcm2835_timer *timer;
+
+ node = of_find_matching_node(NULL, bcm2835_time_match);
+ if (!node)
+ panic("No bcm2835 timer node");
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("Can't remap registers");
+
+ if (of_property_read_u32(node, "clock-frequency", &freq))
+ panic("Can't read clock-frequency");
+
+ system_clock = base + REG_COUNTER_LO;
+ setup_sched_clock(bcm2835_sched_read, 32, freq);
+
+ clocksource_mmio_init(base + REG_COUNTER_LO, node->name,
+ freq, 300, 32, clocksource_mmio_readl_up);
+
+ irq = irq_of_parse_and_map(node, DEFAULT_TIMER);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ panic("Can't allocate timer struct\n");
+
+ timer->control = base + REG_CONTROL;
+ timer->compare = base + REG_COMPARE(DEFAULT_TIMER);
+ timer->match_mask = BIT(DEFAULT_TIMER);
+ timer->evt.name = node->name;
+ timer->evt.rating = 300;
+ timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->evt.set_mode = bcm2835_time_set_mode;
+ timer->evt.set_next_event = bcm2835_time_set_next_event;
+ timer->evt.cpumask = cpumask_of(0);
+ timer->act.name = node->name;
+ timer->act.flags = IRQF_TIMER | IRQF_SHARED;
+ timer->act.dev_id = timer;
+ timer->act.handler = bcm2835_time_interrupt;
+
+ if (setup_irq(irq, &timer->act))
+ panic("Can't set up timer IRQ\n");
+
+ clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
+
+ pr_info("bcm2835: system timer (irq = %d)\n", irq);
+}
+
+struct sys_timer bcm2835_timer = {
+ .init = bcm2835_time_init,
+};
return ret;
}
+EXPORT_SYMBOL(gen_split_key);
#include <plat/ste_dma40.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "cryp_p.h"
#include <crypto/scatterwalk.h>
#include <crypto/algapi.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "hash_alg.h"
#ifndef AT_HDMAC_REGS_H
#define AT_HDMAC_REGS_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#define AT_DMA_MAX_NR_CHANNELS 8
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "dmaengine.h"
#include <linux/module.h>
#include <asm/irq.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include "dmaengine.h"
#include <linux/of_device.h>
#include <asm/irq.h>
-#include <mach/sdma.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include "dmaengine.h"
#include <linux/platform_device.h>
#include <linux/device.h>
#include <mach/regs-icu.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
#include "dmaengine.h"
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/clk.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "dmaengine.h"
#include "mv_xor.h"
#include <linux/spinlock.h>
#include "virt-dma.h"
+
+#include <plat/cpu.h>
#include <plat/dma.h>
struct omap_dmadev {
}
info->dev = &pdev->dev;
info->max77693 = max77693;
- info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic,
- &max77693_muic_regmap_config);
- if (IS_ERR(info->max77693->regmap_muic)) {
- ret = PTR_ERR(info->max77693->regmap_muic);
- dev_err(max77693->dev,
- "failed to allocate register map: %d\n", ret);
- goto err_regmap;
+ if (info->max77693->regmap_muic)
+ dev_dbg(&pdev->dev, "allocate register map\n");
+ else {
+ info->max77693->regmap_muic = devm_regmap_init_i2c(
+ info->max77693->muic,
+ &max77693_muic_regmap_config);
+ if (IS_ERR(info->max77693->regmap_muic)) {
+ ret = PTR_ERR(info->max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
}
platform_set_drvdata(pdev, info);
mutex_init(&info->mutex);
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
#include <asm/mach/irq.h>
#define OFF_MODE 1
static int gpio_irq_type(struct irq_data *d, unsigned type)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned gpio;
+ unsigned gpio = 0;
int retval;
unsigned long flags;
- if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+ if (d->irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- else
+#endif
+
+ if (!gpio)
gpio = irq_to_gpio(bank, d->irq);
if (type & ~IRQ_TYPE_SENSE_MASK)
#include <linux/syscore_ops.h>
#include <linux/slab.h>
+#include <asm/mach/irq.h>
+
#include <mach/irqs.h>
/*
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
+static int irq_base;
#ifdef CONFIG_OF
static struct irq_domain *domain;
return ret;
}
-#ifdef CONFIG_ARCH_PXA
-static inline int __pxa_gpio_to_irq(int gpio)
-{
- if (gpio_is_pxa_type(gpio_type))
- return PXA_GPIO_TO_IRQ(gpio);
- return -1;
-}
-
-static inline int __pxa_irq_to_gpio(int irq)
-{
- if (gpio_is_pxa_type(gpio_type))
- return irq - PXA_GPIO_TO_IRQ(0);
- return -1;
-}
-#else
-static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
-static inline int __pxa_irq_to_gpio(int irq) { return -1; }
-#endif
-
-#ifdef CONFIG_ARCH_MMP
-static inline int __mmp_gpio_to_irq(int gpio)
-{
- if (gpio_is_mmp_type(gpio_type))
- return MMP_GPIO_TO_IRQ(gpio);
- return -1;
-}
-
-static inline int __mmp_irq_to_gpio(int irq)
-{
- if (gpio_is_mmp_type(gpio_type))
- return irq - MMP_GPIO_TO_IRQ(0);
- return -1;
-}
-#else
-static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
-static inline int __mmp_irq_to_gpio(int irq) { return -1; }
-#endif
-
static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- int gpio, ret;
-
- gpio = chip->base + offset;
- ret = __pxa_gpio_to_irq(gpio);
- if (ret >= 0)
- return ret;
- return __mmp_gpio_to_irq(gpio);
+ return chip->base + offset + irq_base;
}
int pxa_irq_to_gpio(int irq)
{
- int ret;
-
- ret = __pxa_irq_to_gpio(irq);
- if (ret >= 0)
- return ret;
- return __mmp_irq_to_gpio(irq);
+ return irq - irq_base;
}
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
struct pxa_gpio_chip *c;
int loop, gpio, gpio_base, n;
unsigned long gedr;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
do {
loop = 0;
}
}
} while (loop);
+
+ chained_irq_exit(chip, desc);
}
static void pxa_ack_muxed_gpio(struct irq_data *d)
static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
{
- int ret, nr_banks, nr_gpios, irq_base;
+ int ret, nr_banks, nr_gpios;
struct device_node *prev, *next, *np = pdev->dev.of_node;
const struct of_device_id *of_id =
of_match_device(pxa_gpio_dt_ids, &pdev->dev);
int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
ret = pxa_gpio_probe_dt(pdev);
- if (ret < 0)
+ if (ret < 0) {
pxa_last_gpio = pxa_gpio_nums();
- else
+#ifdef CONFIG_ARCH_PXA
+ if (gpio_is_pxa_type(gpio_type))
+ irq_base = PXA_GPIO_TO_IRQ(0);
+#endif
+#ifdef CONFIG_ARCH_MMP
+ if (gpio_is_mmp_type(gpio_type))
+ irq_base = MMP_GPIO_TO_IRQ(0);
+#endif
+ } else {
use_of = 1;
+ }
+
if (!pxa_last_gpio)
return -EINVAL;
s3c_gpiolib_track(chip);
}
+#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
+static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
+{
+ unsigned int pin;
+
+ if (WARN_ON(gc->of_gpio_n_cells < 3))
+ return -EINVAL;
+
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+ return -EINVAL;
+
+ if (gpiospec->args[0] > gc->ngpio)
+ return -EINVAL;
+
+ pin = gc->base + gpiospec->args[0];
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+
+ if (flags)
+ *flags = gpiospec->args[2] >> 16;
+
+ return gpiospec->args[0];
+}
+
+static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,s3c24xx-gpio", },
+ {}
+};
+
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ s3c24xx_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 3;
+ gc->of_xlate = s3c24xx_gpio_xlate;
+}
+#else
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
+
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
int nr_chips, void __iomem *base)
{
gc->direction_output = samsung_gpiolib_2bit_output;
samsung_gpiolib_add(chip);
+
+ s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
}
}
}
EXPORT_SYMBOL(s3c_gpio_getpull);
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
#include <asm/mach/irq.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
static int twl4030_gpio_irq_base;
/* genirq interfaces are not available to modules */
static int gpio_twl4030_remove(struct platform_device *pdev);
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+ struct twl4030_gpio_platform_data *omap_twl_info;
+
+ omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+ if (!omap_twl_info)
+ return NULL;
+
+ omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+ "ti,use-leds");
+
+ of_property_read_u32(dev->of_node, "ti,debounce",
+ &omap_twl_info->debounce);
+ of_property_read_u32(dev->of_node, "ti,mmc-cd",
+ (u32 *)&omap_twl_info->mmc_cd);
+ of_property_read_u32(dev->of_node, "ti,pullups",
+ &omap_twl_info->pullups);
+ of_property_read_u32(dev->of_node, "ti,pulldowns",
+ &omap_twl_info->pulldowns);
+
+ return omap_twl_info;
+}
+
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
twl_gpiochip.dev = &pdev->dev;
- if (pdata) {
- twl_gpiochip.base = pdata->gpio_base;
+ if (node)
+ pdata = of_gpio_twl4030(&pdev->dev);
- /*
- * NOTE: boards may waste power if they don't set pullups
- * and pulldowns correctly ... default for non-ULPI pins is
- * pulldown, and some other pins may have external pullups
- * or pulldowns. Careful!
- */
- ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
- if (ret)
- dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
- pdata->pullups, pdata->pulldowns,
- ret);
-
- ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
- if (ret)
- dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
- pdata->debounce, pdata->mmc_cd,
- ret);
-
- /*
- * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
- * is (still) clear if use_leds is set.
- */
- if (pdata->use_leds)
- twl_gpiochip.ngpio += 2;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "Platform data is missing\n");
+ return -ENXIO;
}
+ /*
+ * NOTE: boards may waste power if they don't set pullups
+ * and pulldowns correctly ... default for non-ULPI pins is
+ * pulldown, and some other pins may have external pullups
+ * or pulldowns. Careful!
+ */
+ ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+ if (ret)
+ dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+ pdata->pullups, pdata->pulldowns, ret);
+
+ ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+ if (ret)
+ dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+ pdata->debounce, pdata->mmc_cd, ret);
+
+ /*
+ * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+ * is (still) clear if use_leds is set.
+ */
+ if (pdata->use_leds)
+ twl_gpiochip.ngpio += 2;
+
ret = gpiochip_add(&twl_gpiochip);
if (ret < 0) {
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
twl_gpiochip.ngpio = 0;
gpio_twl4030_remove(pdev);
- } else if (pdata && pdata->setup) {
+ goto out;
+ }
+
+ twl4030_gpio_base = twl_gpiochip.base;
+
+ if (pdata && pdata->setup) {
int status;
status = pdata->setup(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status)
dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
+out:
return ret;
}
if (pdata && pdata->teardown) {
status = pdata->teardown(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status) {
dev_dbg(&pdev->dev, "teardown --> %d\n", status);
return status;
.mmap = ast_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.read = drm_read,
};
ast->cursor_cache = obj;
ast->cursor_cache_gpu_addr = gpu_addr;
- DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
+ DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
return 0;
fail:
return ret;
.unlocked_ioctl = drm_ioctl,
.mmap = cirrus_mmap,
.poll = drm_poll,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.fasync = drm_fasync,
};
static struct drm_driver driver = {
config DRM_EXYNOS_G2D
bool "Exynos DRM G2D"
- depends on DRM_EXYNOS
+ depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_G2D
help
Choose this option if you want to use Exynos G2D for DRM.
/* TODO */
}
+static int exynos_gem_dmabuf_mmap(struct dma_buf *dma_buf,
+ struct vm_area_struct *vma)
+{
+ return -ENOTTY;
+}
+
static struct dma_buf_ops exynos_dmabuf_ops = {
.map_dma_buf = exynos_gem_map_dma_buf,
.unmap_dma_buf = exynos_gem_unmap_dma_buf,
.kmap_atomic = exynos_gem_dmabuf_kmap_atomic,
.kunmap = exynos_gem_dmabuf_kunmap,
.kunmap_atomic = exynos_gem_dmabuf_kunmap_atomic,
+ .mmap = exynos_gem_dmabuf_mmap,
.release = exynos_dmabuf_release,
};
if (!file_priv)
return -ENOMEM;
- drm_prime_init_file_private(&file->prime);
file->driver_priv = file_priv;
return exynos_drm_subdrv_open(dev, file);
e->base.destroy(&e->base);
}
}
- drm_prime_destroy_file_private(&file->prime);
spin_unlock_irqrestore(&dev->event_lock, flags);
exynos_drm_subdrv_close(dev, file);
.poll = drm_poll,
.read = drm_read,
.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.release = drm_release,
};
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "failed to find registers\n");
- ret = -ENOENT;
- goto err_clk;
- }
ctx->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!ctx->regs) {
struct g2d_data {
struct device *dev;
struct clk *gate_clk;
- struct resource *regs_res;
void __iomem *regs;
int irq;
struct workqueue_struct *g2d_workq;
struct exynos_drm_subdrv *subdrv;
int ret;
- g2d = kzalloc(sizeof(*g2d), GFP_KERNEL);
+ g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL);
if (!g2d) {
dev_err(dev, "failed to allocate driver data\n");
return -ENOMEM;
g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
sizeof(struct g2d_runqueue_node), 0, 0, NULL);
- if (!g2d->runqueue_slab) {
- ret = -ENOMEM;
- goto err_free_mem;
- }
+ if (!g2d->runqueue_slab)
+ return -ENOMEM;
g2d->dev = dev;
pm_runtime_enable(dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "failed to get I/O memory\n");
- ret = -ENOENT;
- goto err_put_clk;
- }
- g2d->regs_res = request_mem_region(res->start, resource_size(res),
- dev_name(dev));
- if (!g2d->regs_res) {
- dev_err(dev, "failed to request I/O memory\n");
- ret = -ENOENT;
- goto err_put_clk;
- }
-
- g2d->regs = ioremap(res->start, resource_size(res));
+ g2d->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!g2d->regs) {
dev_err(dev, "failed to remap I/O memory\n");
ret = -ENXIO;
- goto err_release_res;
+ goto err_put_clk;
}
g2d->irq = platform_get_irq(pdev, 0);
if (g2d->irq < 0) {
dev_err(dev, "failed to get irq\n");
ret = g2d->irq;
- goto err_unmap_base;
+ goto err_put_clk;
}
- ret = request_irq(g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d);
+ ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0,
+ "drm_g2d", g2d);
if (ret < 0) {
dev_err(dev, "irq request failed\n");
- goto err_unmap_base;
+ goto err_put_clk;
}
platform_set_drvdata(pdev, g2d);
ret = exynos_drm_subdrv_register(subdrv);
if (ret < 0) {
dev_err(dev, "failed to register drm g2d device\n");
- goto err_free_irq;
+ goto err_put_clk;
}
dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n",
return 0;
-err_free_irq:
- free_irq(g2d->irq, g2d);
-err_unmap_base:
- iounmap(g2d->regs);
-err_release_res:
- release_resource(g2d->regs_res);
- kfree(g2d->regs_res);
err_put_clk:
pm_runtime_disable(dev);
clk_put(g2d->gate_clk);
destroy_workqueue(g2d->g2d_workq);
err_destroy_slab:
kmem_cache_destroy(g2d->runqueue_slab);
-err_free_mem:
- kfree(g2d);
return ret;
}
cancel_work_sync(&g2d->runqueue_work);
exynos_drm_subdrv_unregister(&g2d->subdrv);
- free_irq(g2d->irq, g2d);
while (g2d->runqueue_node) {
g2d_free_runqueue_node(g2d, g2d->runqueue_node);
g2d->runqueue_node = g2d_get_runqueue_node(g2d);
}
- iounmap(g2d->regs);
- release_resource(g2d->regs_res);
- kfree(g2d->regs_res);
-
pm_runtime_disable(&pdev->dev);
clk_put(g2d->gate_clk);
g2d_fini_cmdlist(g2d);
destroy_workqueue(g2d->g2d_workq);
kmem_cache_destroy(g2d->runqueue_slab);
- kfree(g2d);
return 0;
}
}
#endif
-SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
+static SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
struct platform_driver g2d_driver = {
.probe = g2d_probe,
__free_page(pages[i]);
drm_free_large(pages);
- return ERR_PTR(PTR_ERR(p));
+ return ERR_CAST(p);
}
static void exynos_gem_put_pages(struct drm_gem_object *obj,
*/
args->pitch = args->width * ((args->bpp + 7) / 8);
- args->size = PAGE_ALIGN(args->pitch * args->height);
+ args->size = args->pitch * args->height;
exynos_gem_obj = exynos_drm_gem_create(dev, args->flags, args->size);
if (IS_ERR(exynos_gem_obj))
DRM_DEBUG_KMS("%s\n", __FILE__);
- ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx) {
DRM_LOG_KMS("failed to alloc common hdmi context.\n");
return -ENOMEM;
DRM_DEBUG_KMS("%s\n", __FILE__);
exynos_drm_subdrv_unregister(&ctx->subdrv);
- kfree(ctx);
return 0;
}
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_NV12,
- DRM_FORMAT_NV12M,
DRM_FORMAT_NV12MT,
};
DRM_DEBUG_KMS("%s\n", __FILE__);
- ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->raw_edid = NULL;
}
- kfree(ctx);
-
return 0;
}
DRM_DEBUG_KMS("HDMI resource init\n");
- memset(res, 0, sizeof *res);
+ memset(res, 0, sizeof(*res));
/* get clocks, power */
res->hdmi = clk_get(dev, "hdmi");
clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
res->regul_bulk = kzalloc(ARRAY_SIZE(supply) *
- sizeof res->regul_bulk[0], GFP_KERNEL);
+ sizeof(res->regul_bulk[0]), GFP_KERNEL);
if (!res->regul_bulk) {
DRM_ERROR("failed to get memory for regulators\n");
goto fail;
clk_put(res->sclk_hdmi);
if (!IS_ERR_OR_NULL(res->hdmi))
clk_put(res->hdmi);
- memset(res, 0, sizeof *res);
+ memset(res, 0, sizeof(*res));
return 0;
}
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DRM_ERROR("failed to find registers\n");
- ret = -ENOENT;
- goto err_resource;
- }
hdata->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!hdata->regs) {
static void vp_default_filter(struct mixer_resources *res)
{
vp_filter_set(res, VP_POLY8_Y0_LL,
- filter_y_horiz_tap8, sizeof filter_y_horiz_tap8);
+ filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8));
vp_filter_set(res, VP_POLY4_Y0_LL,
- filter_y_vert_tap4, sizeof filter_y_vert_tap4);
+ filter_y_vert_tap4, sizeof(filter_y_vert_tap4));
vp_filter_set(res, VP_POLY4_C0_LL,
- filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4);
+ filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4));
}
static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable)
.pos = DSPAPOS,
.surf = DSPASURF,
.addr = MRST_DSPABASE,
+ .base = MRST_DSPABASE,
.status = PIPEASTAT,
.linoff = DSPALINOFF,
.tileoff = DSPATILEOFF,
.pos = DSPBPOS,
.surf = DSPBSURF,
.addr = DSPBBASE,
+ .base = DSPBBASE,
.status = PIPEBSTAT,
.linoff = DSPBLINOFF,
.tileoff = DSPBTILEOFF,
.unlocked_ioctl = drm_ioctl,
.mmap = i810_mmap_buffers,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->error_lock);
spin_lock_init(&dev_priv->rps_lock);
+ spin_lock_init(&dev_priv->dpio_lock);
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
dev_priv->num_pipe = 3;
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
} else if (INTEL_INFO(dev)->gen == 3) {
- /* IIR "flip pending" means done if this bit is set */
- I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
-
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+ WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+ && (val & DP_PIPEB_SELECT),
"IBX PCH dp port still using transcoder B\n");
}
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+ WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0
+ && (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
break;
}
- intel_dp_i2c_init(intel_dp, intel_connector, name);
-
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
- bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
- struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+ }
+
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
+ if (is_edp(intel_dp)) {
+ bool ret;
+ struct edid *edid;
ironlake_edp_panel_vdd_on(intel_dp);
ret = intel_dp_get_dpcd(intel_dp);
return val;
}
-u32 intel_panel_get_max_backlight(struct drm_device *dev)
+static u32 _intel_panel_get_max_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 max;
max = i915_read_blc_pwm_ctl(dev_priv);
- if (max == 0) {
- /* XXX add code here to query mode clock or hardware clock
- * and program max PWM appropriately.
- */
- pr_warn_once("fixme: max PWM is zero\n");
- return 1;
- }
if (HAS_PCH_SPLIT(dev)) {
max >>= 16;
max *= 0xff;
}
+ return max;
+}
+
+u32 intel_panel_get_max_backlight(struct drm_device *dev)
+{
+ u32 max;
+
+ max = _intel_panel_get_max_backlight(dev);
+ if (max == 0) {
+ /* XXX add code here to query mode clock or hardware clock
+ * and program max PWM appropriately.
+ */
+ pr_warn_once("fixme: max PWM is zero\n");
+ return 1;
+ }
+
DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
return max;
}
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
- props.max_brightness = intel_panel_get_max_backlight(dev);
+ props.max_brightness = _intel_panel_get_max_backlight(dev);
+ if (props.max_brightness == 0) {
+ DRM_ERROR("Failed to get maximum backlight value\n");
+ return -ENODEV;
+ }
dev_priv->backlight =
backlight_device_register("intel_backlight",
&connector->kdev, dev,
if (IS_PINEVIEW(dev))
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
+
+ /* IIR "flip pending" means done if this bit is set */
+ I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
}
static void i85x_init_clock_gating(struct drm_device *dev)
hotplug_mask = intel_sdvo->is_sdvob ?
SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
}
- dev_priv->hotplug_supported_mask |= hotplug_mask;
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
- /* Set up hotplug command - note paranoia about contents of reply.
- * We assume that the hardware is in a sane state, and only touch
- * the bits we think we understand.
- */
- intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
- &intel_sdvo->hotplug_active, 2);
- intel_sdvo->hotplug_active[0] &= ~0x3;
-
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
goto err;
}
+ /* Only enable the hotplug irq if we need it, to work around noisy
+ * hotplug lines.
+ */
+ if (intel_sdvo->hotplug_active[0])
+ dev_priv->hotplug_supported_mask |= hotplug_mask;
+
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
/* Set the input timing to the screen. Assume always input 0. */
.mmap = mgag200_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.read = drm_read,
};
args->size = args->pitch * args->height;
args->size = roundup(args->size, PAGE_SIZE);
- ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+ ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo);
if (ret)
return ret;
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ /* initialise gpios and routing to vbios defaults */
+ nouveau_gpio_reset(dev);
+
/* disable, and ack any pending gpio interrupts */
nv_wr32(dev, 0xe050, 0x00000000);
nv_wr32(dev, 0xe054, 0xffffffff);
case OUTPUT_DP:
if (nv_connector->base.display_info.bpc == 6) {
nv_encoder->dp.datarate = mode->clock * 18 / 8;
- syncs |= 0x00000140;
+ syncs |= 0x00000002 << 6;
} else {
nv_encoder->dp.datarate = mode->clock * 24 / 8;
- syncs |= 0x00000180;
+ syncs |= 0x00000005 << 6;
}
if (nv_encoder->dcb->sorconf.link & 1)
}
}
+/**
+ * radeon_get_pll_use_mask - look up a mask of which pplls are in use
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the mask of which PPLLs (Pixel PLLs) are in use.
+ */
+static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_crtc *test_crtc;
+ struct radeon_crtc *radeon_test_crtc;
+ u32 pll_in_use = 0;
+
+ list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+ if (crtc == test_crtc)
+ continue;
+
+ radeon_test_crtc = to_radeon_crtc(test_crtc);
+ if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+ pll_in_use |= (1 << radeon_test_crtc->pll_id);
+ }
+ return pll_in_use;
+}
+
+/**
+ * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
+ * also in DP mode. For DP, a single PPLL can be used for all DP
+ * crtcs/encoders.
+ */
+static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_encoder *test_encoder;
+ struct radeon_crtc *radeon_test_crtc;
+
+ list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+ if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+ /* for DP use the same PLL for all */
+ radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
+ if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+ return radeon_test_crtc->pll_id;
+ }
+ }
+ }
+ return ATOM_PPLL_INVALID;
+}
+
+/**
+ * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors
+ * a single PPLL can be used for all DP crtcs/encoders. For non-DP
+ * monitors a dedicated PPLL must be used. If a particular board has
+ * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
+ * as there is no need to program the PLL itself. If we are not able to
+ * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
+ * avoid messing up an existing monitor.
+ *
+ * Asic specific PLL information
+ *
+ * DCE 6.1
+ * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
+ * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
+ *
+ * DCE 6.0
+ * - PPLL0 is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 5.0
+ * - DCPLL is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 3.0/4.0/4.1
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ */
static int radeon_atom_pick_pll(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *test_encoder;
- struct drm_crtc *test_crtc;
- uint32_t pll_in_use = 0;
+ u32 pll_in_use;
+ int pll;
if (ASIC_IS_DCE61(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if ((test_radeon_encoder->encoder_id ==
ENCODER_OBJECT_ID_INTERNAL_UNIPHY) &&
- (dig->linkb == false)) /* UNIPHY A uses PPLL2 */
+ (dig->linkb == false))
+ /* UNIPHY A uses PPLL2 */
return ATOM_PPLL2;
+ else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+ /* UNIPHY B/C/D/E/F */
+ if (rdev->clock.dp_extclk)
+ /* skip PPLL programming if using ext clock */
+ return ATOM_PPLL_INVALID;
+ else {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
+ }
+ break;
}
}
/* UNIPHY B/C/D/E/F */
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_test_crtc;
-
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if ((radeon_test_crtc->pll_id == ATOM_PPLL0) ||
- (radeon_test_crtc->pll_id == ATOM_PPLL1))
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- if (!(pll_in_use & 4))
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ if (!(pll_in_use & (1 << ATOM_PPLL0)))
return ATOM_PPLL0;
- return ATOM_PPLL1;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
+ return ATOM_PPLL1;
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
} else if (ASIC_IS_DCE4(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
* depending on the asic:
* DCE4: PPLL or ext clock
- * DCE5: DCPLL or ext clock
+ * DCE5: PPLL, DCPLL, or ext clock
+ * DCE6: PPLL, PPLL0, or ext clock
*
* Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
* PPLL/DCPLL programming and only program the DP DTO for the
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (rdev->clock.dp_extclk)
+ /* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else if (ASIC_IS_DCE6(rdev))
+ /* use PPLL0 for all DP */
return ATOM_PPLL0;
else if (ASIC_IS_DCE5(rdev))
+ /* use DCPLL for all DP */
return ATOM_DCPLL;
+ else {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
}
+ break;
}
}
-
- /* otherwise, pick one of the plls */
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_test_crtc;
-
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
- (radeon_test_crtc->pll_id <= ATOM_PPLL2))
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- if (!(pll_in_use & 1))
+ /* all other cases */
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ if (!(pll_in_use & (1 << ATOM_PPLL2)))
+ return ATOM_PPLL2;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
return ATOM_PPLL1;
- return ATOM_PPLL2;
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
} else
+ /* use PPLL1 or PPLL2 */
return radeon_crtc->crtc_id;
}
break;
}
done:
- radeon_crtc->pll_id = -1;
+ radeon_crtc->pll_id = ATOM_PPLL_INVALID;
}
static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
else
radeon_crtc->crtc_offset = 0;
}
- radeon_crtc->pll_id = -1;
+ radeon_crtc->pll_id = ATOM_PPLL_INVALID;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
*/
void radeon_fence_process(struct radeon_device *rdev, int ring)
{
- uint64_t seq, last_seq;
+ uint64_t seq, last_seq, last_emitted;
unsigned count_loop = 0;
bool wake = false;
*/
last_seq = atomic64_read(&rdev->fence_drv[ring].last_seq);
do {
+ last_emitted = rdev->fence_drv[ring].sync_seq[ring];
seq = radeon_fence_read(rdev, ring);
seq |= last_seq & 0xffffffff00000000LL;
if (seq < last_seq) {
- seq += 0x100000000LL;
+ seq &= 0xffffffff;
+ seq |= last_emitted & 0xffffffff00000000LL;
}
- if (seq == last_seq) {
+ if (seq <= last_seq || seq > last_emitted) {
break;
}
/* If we loop over we don't want to return without
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
.unlocked_ioctl = drm_ioctl,
.release = drm_release,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
This is a KMS enabled DRM driver for the VMware SVGA2
virtual hardware.
The compiled module will be called "vmwgfx.ko".
+
+config DRM_VMWGFX_FBCON
+ depends on DRM_VMWGFX
+ bool "Enable framebuffer console under vmwgfx by default"
+ help
+ Choose this option if you are shipping a new vmwgfx
+ userspace driver that supports using the kernel driver.
+
{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
{0, 0, 0}
};
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
-static int enable_fbdev;
+static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON);
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
.open = vmw_driver_open,
.preclose = vmw_preclose,
.postclose = vmw_postclose,
+
+ .dumb_create = vmw_dumb_create,
+ .dumb_map_offset = vmw_dumb_map_offset,
+ .dumb_destroy = vmw_dumb_destroy,
+
.fops = &vmwgfx_driver_fops,
.name = VMWGFX_DRIVER_NAME,
.desc = VMWGFX_DRIVER_DESC,
int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int vmw_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle,
+ uint64_t *offset);
+int vmw_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev,
+ uint32_t handle);
/**
* Overlay control - vmwgfx_overlay.c
*/
vmw_resource_unreference(&res);
return ret;
}
+
+
+int vmw_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ struct vmw_user_dma_buffer *vmw_user_bo;
+ struct ttm_buffer_object *tmp;
+ int ret;
+
+ args->pitch = args->width * ((args->bpp + 7) / 8);
+ args->size = args->pitch * args->height;
+
+ vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL);
+ if (vmw_user_bo == NULL)
+ return -ENOMEM;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (ret != 0) {
+ kfree(vmw_user_bo);
+ return ret;
+ }
+
+ ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size,
+ &vmw_vram_sys_placement, true,
+ &vmw_user_dmabuf_destroy);
+ if (ret != 0)
+ goto out_no_dmabuf;
+
+ tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
+ ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
+ &vmw_user_bo->base,
+ false,
+ ttm_buffer_type,
+ &vmw_user_dmabuf_release, NULL);
+ if (unlikely(ret != 0))
+ goto out_no_base_object;
+
+ args->handle = vmw_user_bo->base.hash.key;
+
+out_no_base_object:
+ ttm_bo_unref(&tmp);
+out_no_dmabuf:
+ ttm_read_unlock(&vmaster->lock);
+ return ret;
+}
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle,
+ uint64_t *offset)
+{
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_dma_buffer *out_buf;
+ int ret;
+
+ ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf);
+ if (ret != 0)
+ return -EINVAL;
+
+ *offset = out_buf->base.addr_space_offset;
+ vmw_dmabuf_unreference(&out_buf);
+ return 0;
+}
+
+int vmw_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev,
+ uint32_t handle)
+{
+ return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+ handle, TTM_REF_USAGE);
+}
u16 regs[INA2XX_MAX_REGISTERS];
};
-int ina2xx_read_word(struct i2c_client *client, int reg)
-{
- int val = i2c_smbus_read_word_data(client, reg);
- if (unlikely(val < 0)) {
- dev_dbg(&client->dev,
- "Failed to read register: %d\n", reg);
- return val;
- }
- return be16_to_cpu(val);
-}
-
-void ina2xx_write_word(struct i2c_client *client, int reg, int data)
-{
- i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
-}
-
static struct ina2xx_data *ina2xx_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
/* Read all registers */
for (i = 0; i < data->registers; i++) {
- int rv = ina2xx_read_word(client, i);
+ int rv = i2c_smbus_read_word_swapped(client, i);
if (rv < 0) {
ret = ERR_PTR(rv);
goto abort;
switch (data->kind) {
case ina219:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA219_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 13 in datasheet) */
- ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 40960000 / shunt);
dev_info(&client->dev,
"power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA219_REGISTERS;
break;
case ina226:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA226_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 1 in datasheet)*/
- ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 5120000 / shunt);
dev_info(&client->dev,
"power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA226_REGISTERS;
#include <linux/hwmon-sysfs.h>
#include <plat/adc.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
struct s3c_hwmon_attr {
struct sensor_device_attribute in;
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct twl4030_madc_request req;
+ struct twl4030_madc_request req = {
+ .channels = 1 << attr->index,
+ .method = TWL4030_MADC_SW2,
+ .type = TWL4030_MADC_WAIT,
+ };
long val;
- req.channels = (1 << attr->index);
- req.method = TWL4030_MADC_SW2;
- req.func_cb = NULL;
val = twl4030_madc_conversion(&req);
if (val < 0)
return val;
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
- if (pca_data->i2c_clock > 10000) {
+ if (pca_data->i2c_clock > 1000000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 4000) {
+ } else if (pca_data->i2c_clock > 400000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 1000) {
+ } else if (pca_data->i2c_clock > 100000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
DH89xxCC (PCH)
Panther Point (PCH)
Lynx Point (PCH)
+ Lynx Point-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
+config I2C_DESIGNWARE_CORE
+ tristate
+
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
config I2C_PNX
tristate "I2C bus support for Philips PNX and NXP LPC targets"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ depends on ARCH_LPC32XX
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
/* ----- global defines ----------------------------------------------- */
* ----------------------------------------------------------------------------
*
*/
+#include <linux/export.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/err.h>
dw_writel(dev, dev->master_cfg , DW_IC_CON);
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_dw_init);
/*
* Waiting for bus not busy
return ret;
}
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
u32 i2c_dw_func(struct i2c_adapter *adap)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
return dev->functionality;
}
+EXPORT_SYMBOL_GPL(i2c_dw_func);
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
{
return IRQ_HANDLED;
}
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
void i2c_dw_enable(struct dw_i2c_dev *dev)
{
/* Enable the adapter */
dw_writel(dev, 1, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
dw_writel(dev, 0, DW_IC_INTR_MASK);
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
void i2c_dw_clear_int(struct dw_i2c_dev *dev)
{
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
void i2c_dw_disable_int(struct dw_i2c_dev *dev)
{
dw_writel(dev, 0, DW_IC_INTR_MASK);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_COMP_PARAM_1);
}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
DH89xxCC (PCH) 0x2330 32 hard yes yes yes
Panther Point (PCH) 0x1e22 32 hard yes yes yes
Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
Features supported by this driver:
Software PEC no
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
struct i801_priv {
struct i2c_adapter adapter;
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
{ 0, }
};
#include <linux/pinctrl/consumer.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
*******************************************************************************/
/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
* <Peter dot Milne at D hyphen TACQ dot com>
*
- * With acknowledgements to i2c-algo-ibm_ocp.c by
+ * With acknowledgements to i2c-algo-ibm_ocp.c by
* Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
*
* And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
*
* Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
- *
+ *
* And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
*
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include "i2c-iop3xx.h"
/* global unit counter */
static int i2c_id;
-static inline unsigned char
-iic_cook_addr(struct i2c_msg *msg)
+static inline unsigned char
+iic_cook_addr(struct i2c_msg *msg)
{
unsigned char addr;
if (msg->flags & I2C_M_RD)
addr |= 1;
- return addr;
+ return addr;
}
-static void
+static void
iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
/* Follows devman 9.3 */
__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
-}
+}
-static void
+static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
- /*
+ /*
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
- gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+ gpio_set_value(7, 0);
+ gpio_set_value(6, 0);
} else {
- gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+ gpio_set_value(5, 0);
+ gpio_set_value(4, 0);
}
#endif
/* NB SR bits not same position as CR IE bits :-( */
- iop3xx_adap->SR_enabled =
+ iop3xx_adap->SR_enabled =
IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-static void
+static void
iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
-
- cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
+
+ cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-/*
- * NB: the handler has to clear the source of the interrupt!
+/*
+ * NB: the handler has to clear the source of the interrupt!
* Then it passes the SR flags of interest to BH via adap data
*/
-static irqreturn_t
-iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
+static irqreturn_t
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
}
/* check all error conditions, clear them , report most important */
-static int
+static int
iop3xx_i2c_error(u32 sr)
{
int rc = 0;
if ( !rc ) rc = -I2C_ERR_BERR;
}
if ((sr & IOP3XX_ISR_ALD)) {
- if ( !rc ) rc = -I2C_ERR_ALD;
+ if ( !rc ) rc = -I2C_ERR_ALD;
}
- return rc;
+ return rc;
}
-static inline u32
+static inline u32
iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long flags;
typedef int (* compare_func)(unsigned test, unsigned mask);
/* returns 1 on correct comparison */
-static int
-iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
unsigned flags, unsigned* status,
compare_func compare)
{
}
/*
- * Concrete compare_funcs
+ * Concrete compare_funcs
*/
-static int
+static int
all_bits_clear(unsigned test, unsigned mask)
{
return (test & mask) == 0;
}
-static int
+static int
any_bits_set(unsigned test, unsigned mask)
{
return (test & mask) != 0;
}
-static int
+static int
iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
+ return iop3xx_i2c_wait_event(
iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
}
-static int
-iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
struct i2c_msg* msg)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
}
__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
-
+
cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
return rc;
}
-static int
-iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
+static int
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
return rc;
-}
+}
-static int
-iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
+static int
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
return rc;
}
-static int
+static int
iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int ii;
int rc = 0;
- for (ii = 0; rc == 0 && ii != count; ++ii)
+ for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
return rc;
}
-static int
+static int
iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
-
+
return rc;
}
* Each transfer (i.e. a read or a write) is separated by a repeated start
* condition.
*/
-static int
-iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
+static int
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int rc;
/*
* master_xfer() - main read/write entry
*/
-static int
-iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+static int
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
int num)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
}
iop3xx_i2c_transaction_cleanup(iop3xx_adap);
-
+
if(ret)
return ret;
- return im;
+ return im;
}
-static u32
+static u32
iop3xx_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
.functionality = iop3xx_i2c_func,
};
-static int
+static int
iop3xx_i2c_remove(struct platform_device *pdev)
{
struct i2c_adapter *padapter = platform_get_drvdata(pdev);
- struct i2c_algo_iop3xx_data *adapter_data =
+ struct i2c_algo_iop3xx_data *adapter_data =
(struct i2c_algo_iop3xx_data *)padapter->algo_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
return 0;
}
-static int
+static int
iop3xx_i2c_probe(struct platform_device *pdev)
{
struct resource *res;
struct device_node *node = dev->of_node;
int ret;
- if (!node)
- return -EINVAL;
-
- i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
return err;
i2c->dev = dev;
+ i2c->speed = &mxs_i2c_95kHz_config;
- err = mxs_i2c_get_ofdata(i2c);
- if (err)
- return err;
+ if (dev->of_node) {
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+ }
platform_set_drvdata(pdev, i2c);
#include <linux/io.h>
#include <mach/mfp.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-nuc900.h>
/* nuc900 i2c registers offset */
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
+ mcntrl_drsie = 0x00000010,
+ mcntrl_rffie = 0x00000020,
+ mcntrl_daie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&alg_data->adapter.dev,
- "%s(): Write dummy data to fill Rx-fifo...\n",
- __func__);
+ /* 'Asking' is done asynchronously, e.g. dummy TX of several
+ * bytes is done before the first actual RX arrives in FIFO.
+ * Therefore, ordered bytes (via TX) are counted separately.
+ */
+ if (alg_data->mif.order) {
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
- if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
+ if (alg_data->mif.order == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
/*
- * Enable interrupt RFDAIE (data in Rx fifo),
- * and disable DRMIE (need data for Tx)
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
*/
- ctl = ioread32(I2C_REG_CTL(alg_data));
- ctl |= mcntrl_rffie | mcntrl_daie;
- ctl &= ~mcntrl_drmie;
- iowrite32(ctl, I2C_REG_CTL(alg_data));
+ iowrite32(val, I2C_REG_TX(alg_data));
+ alg_data->mif.order--;
}
-
- /*
- * Now we'll 'ask' for data:
- * For each byte we want to receive, we must
- * write a (dummy) byte to the Tx-FIFO.
- */
- iowrite32(val, I2C_REG_TX(alg_data));
-
return 0;
}
alg_data->mif.buf = pmsg->buf;
alg_data->mif.len = pmsg->len;
+ alg_data->mif.order = pmsg->len;
alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
I2C_SMBUS_READ : I2C_SMBUS_WRITE;
alg_data->mif.ret = 0;
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
+ alg_data->mif.order = 0;
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
#include <asm/irq.h>
#include <plat/regs-iic.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
#define QUIRK_S3C2440 (1 << 0)
complete(&adap->dev_released);
}
+/*
+ * This function is only needed for mutex_lock_nested, so it is never
+ * called unless locking correctness checking is enabled. Thus we
+ * make it inline to avoid a compiler warning. That's what gcc ends up
+ * doing anyway.
+ */
+static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+{
+ unsigned int depth = 0;
+
+ while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
+ depth++;
+
+ return depth;
+}
+
/*
* Let users instantiate I2C devices through sysfs. This can be used when
* platform initialization code doesn't contain the proper data for
/* Make sure the device was added through sysfs */
res = -ENOENT;
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
if (client->addr == addr) {
return res;
/* Remove devices instantiated from sysfs */
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
if (IS_ERR(st->adc_clk)) {
dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
- ret = PTR_ERR(st->clk);
+ ret = PTR_ERR(st->adc_clk);
goto error_disable_clk;
}
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ depends on ARCH_OMAP1
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the OMAP keypad.
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
/* Key scan registers */
#define DAVINCI_KEYSCAN_KEYCTRL 0x0000
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/ep93xx_keypad.h>
+#include <linux/platform_data/keypad-ep93xx.h>
/*
* Keypad Interface Register offsets
#include <linux/clk.h>
#include <linux/module.h>
-#include <plat/ske.h>
+#include <linux/platform_data/keypad-nomadik-ske.h>
/* SKE_CR bits */
#define SKE_KPMLT (0x1 << 6)
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <asm/gpio.h>
-#include <plat/keypad.h>
-#include <plat/menelaus.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <plat/mux.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
#undef NEW_BOARD_LEARNING_MODE
static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
{
- struct omap_kp *omap_kp = dev_id;
-
/* disable keyboard interrupt and schedule for handling */
- if (cpu_is_omap24xx()) {
- int i;
-
- for (i = 0; i < omap_kp->rows; i++) {
- int gpio_irq = gpio_to_irq(row_gpios[i]);
- /*
- * The interrupt which we're currently handling should
- * be disabled _nosync() to avoid deadlocks waiting
- * for this handler to complete. All others should
- * be disabled the regular way for SMP safety.
- */
- if (gpio_irq == irq)
- disable_irq_nosync(gpio_irq);
- else
- disable_irq(gpio_irq);
- }
- } else
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
tasklet_schedule(&kp_tasklet);
{
int col = 0;
- /* read the keypad status */
- if (cpu_is_omap24xx()) {
- /* read the keypad status */
- for (col = 0; col < omap_kp->cols; col++) {
- set_col_gpio_val(omap_kp, ~(1 << col));
- state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
- }
- set_col_gpio_val(omap_kp, 0);
-
- } else {
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ /* disable keyboard interrupt and schedule for handling */
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- /* read the keypad status */
- omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- for (col = 0; col < omap_kp->cols; col++) {
- omap_writew(~(1 << col) & 0xff,
- OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ /* read the keypad status */
+ omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ for (col = 0; col < omap_kp->cols; col++) {
+ omap_writew(~(1 << col) & 0xff,
+ OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(omap_kp->delay);
+ udelay(omap_kp->delay);
- state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
- OMAP_MPUIO_KBR_LATCH) & 0xff;
- }
- omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(2);
+ state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
+ OMAP_MPUIO_KBR_LATCH) & 0xff;
}
+ omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ udelay(2);
}
static void omap_kp_tasklet(unsigned long data)
mod_timer(&omap_kp_data->timer, jiffies + delay);
} else {
/* enable interrupts */
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp_data->rows; i++)
- enable_irq(gpio_to_irq(row_gpios[i]));
- } else {
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- kp_cur_group = -1;
- }
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ kp_cur_group = -1;
}
}
static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct omap_kp *omap_kp = dev_get_drvdata(dev);
int state;
if (sscanf(buf, "%u", &state) != 1)
mutex_lock(&kp_enable_mutex);
if (state != kp_enable) {
if (state)
- enable_irq(INT_KEYBOARD);
+ enable_irq(omap_kp->irq);
else
- disable_irq(INT_KEYBOARD);
+ disable_irq(omap_kp->irq);
kp_enable = state;
}
mutex_unlock(&kp_enable_mutex);
struct omap_kp *omap_kp;
struct input_dev *input_dev;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
- int i, col_idx, row_idx, irq_idx, ret;
+ int i, col_idx, row_idx, ret;
unsigned int row_shift, keycodemax;
if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
omap_kp->input = input_dev;
/* Disable the interrupt for the MPUIO keyboard */
- if (!cpu_is_omap24xx())
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
if (pdata->delay)
omap_kp->delay = pdata->delay;
omap_kp->rows = pdata->rows;
omap_kp->cols = pdata->cols;
- if (cpu_is_omap24xx()) {
- /* Cols: outputs */
- for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
- if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- col_gpios[col_idx]);
- goto err1;
- }
- gpio_direction_output(col_gpios[col_idx], 0);
- }
- /* Rows: inputs */
- for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
- if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- row_gpios[row_idx]);
- goto err2;
- }
- gpio_direction_input(row_gpios[row_idx]);
- }
- } else {
- col_idx = 0;
- row_idx = 0;
- }
+ col_idx = 0;
+ row_idx = 0;
setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
/* scan current status and enable interrupt */
omap_kp_scan_keypad(omap_kp, keypad_state);
- if (!cpu_is_omap24xx()) {
- omap_kp->irq = platform_get_irq(pdev, 0);
- if (omap_kp->irq >= 0) {
- if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
- "omap-keypad", omap_kp) < 0)
- goto err4;
- }
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- } else {
- for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
- if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
- omap_kp_interrupt,
- IRQF_TRIGGER_FALLING,
- "omap-keypad", omap_kp) < 0)
- goto err5;
- }
+ omap_kp->irq = platform_get_irq(pdev, 0);
+ if (omap_kp->irq >= 0) {
+ if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+ "omap-keypad", omap_kp) < 0)
+ goto err4;
}
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
return 0;
-err5:
- for (i = irq_idx - 1; i >=0; i--)
- free_irq(row_gpios[i], omap_kp);
+
err4:
input_unregister_device(omap_kp->input);
input_dev = NULL;
err2:
for (i = row_idx - 1; i >=0; i--)
gpio_free(row_gpios[i]);
-err1:
for (i = col_idx - 1; i >=0; i--)
gpio_free(col_gpios[i]);
/* disable keypad interrupt handling */
tasklet_disable(&kp_tasklet);
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp->cols; i++)
- gpio_free(col_gpios[i]);
- for (i = 0; i < omap_kp->rows; i++) {
- gpio_free(row_gpios[i]);
- free_irq(gpio_to_irq(row_gpios[i]), omap_kp);
- }
- } else {
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- free_irq(omap_kp->irq, omap_kp);
- }
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ free_irq(omap_kp->irq, omap_kp);
del_timer_sync(&omap_kp->timer);
tasklet_kill(&kp_tasklet);
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
/*
* Keypad Controller registers
*/
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/pxa930_rotary.h>
+#include <linux/platform_data/keyboard-pxa930_rotary.h>
#define SBCR (0x04)
#define ERCR (0x0c)
#include <linux/pm_wakeup.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <plat/keyboard.h>
+#include <linux/platform_data/keyboard-spear.h>
/* Keyboard Registers */
#define MODE_CTL_REG 0x00
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
/* Keypad Interface Control Registers */
#define KPI_CONF 0x00
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/pxa930_trkball.h>
+#include <linux/platform_data/mouse-pxa930_trkball.h>
/* Trackball Controller Register Definitions */
#define TBCR (0x000C)
x = (short) iomd_readl(IOMD_MOUSEX);
y = (short) iomd_readl(IOMD_MOUSEY);
- b = (short) (__raw_readl(0xe0310000) ^ 0x70);
+ b = (short) (__raw_readl(IOMEM(0xe0310000)) ^ 0x70);
dx = x - rpcmouse_lastx;
dy = y - rpcmouse_lasty;
#include <linux/module.h>
#include <asm/mach-types.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
#include <plat/adc.h>
#include <plat/regs-adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
--- /dev/null
+obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
--- /dev/null
+/*
+ * Copyright 2010 Broadcom
+ * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
+ *
+ * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
+ * on bank 0 is set to signify that an interrupt in bank 1 has fired, and
+ * to look in the bank 1 status register for more information.
+ *
+ * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
+ * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
+ * status register, but bank 0 bit 8 is _not_ set.
+ *
+ * Quirk 2: You can't mask the register 1/2 pending interrupts
+ *
+ * In a proper cascaded interrupt controller, the interrupt lines with
+ * cascaded interrupt controllers on them are just normal interrupt lines.
+ * You can mask the interrupts and get on with things. With this controller
+ * you can't do that.
+ *
+ * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
+ *
+ * Those interrupts that have shortcuts can only be masked/unmasked in
+ * their respective banks' enable/disable registers. Doing so in the bank 0
+ * enable/disable registers has no effect.
+ *
+ * The FIQ control register:
+ * Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
+ * Bit 7: Enable FIQ generation
+ * Bits 8+: Unused
+ *
+ * An interrupt must be disabled before configuring it for FIQ generation
+ * otherwise both handlers will fire at the same time!
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/bcm2835.h>
+
+#include <asm/exception.h>
+
+/* Put the bank and irq (32 bits) into the hwirq */
+#define MAKE_HWIRQ(b, n) ((b << 5) | (n))
+#define HWIRQ_BANK(i) (i >> 5)
+#define HWIRQ_BIT(i) BIT(i & 0x1f)
+
+#define NR_IRQS_BANK0 8
+#define BANK0_HWIRQ_MASK 0xff
+/* Shortcuts can't be disabled so any unknown new ones need to be masked */
+#define SHORTCUT1_MASK 0x00007c00
+#define SHORTCUT2_MASK 0x001f8000
+#define SHORTCUT_SHIFT 10
+#define BANK1_HWIRQ BIT(8)
+#define BANK2_HWIRQ BIT(9)
+#define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
+ | SHORTCUT1_MASK | SHORTCUT2_MASK)
+
+#define REG_FIQ_CONTROL 0x0c
+
+#define NR_BANKS 3
+#define IRQS_PER_BANK 32
+
+static int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
+static int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
+static int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
+static int bank_irqs[] __initconst = { 8, 32, 32 };
+
+static const int shortcuts[] = {
+ 7, 9, 10, 18, 19, /* Bank 1 */
+ 21, 22, 23, 24, 25, 30 /* Bank 2 */
+};
+
+struct armctrl_ic {
+ void __iomem *base;
+ void __iomem *pending[NR_BANKS];
+ void __iomem *enable[NR_BANKS];
+ void __iomem *disable[NR_BANKS];
+ struct irq_domain *domain;
+};
+
+static struct armctrl_ic intc __read_mostly;
+
+static void armctrl_mask_irq(struct irq_data *d)
+{
+ writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
+}
+
+static void armctrl_unmask_irq(struct irq_data *d)
+{
+ writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
+}
+
+static struct irq_chip armctrl_chip = {
+ .name = "ARMCTRL-level",
+ .irq_mask = armctrl_mask_irq,
+ .irq_unmask = armctrl_unmask_irq
+};
+
+static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize != 2))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[0] >= NR_BANKS))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
+ return -EINVAL;
+
+ *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static struct irq_domain_ops armctrl_ops = {
+ .xlate = armctrl_xlate
+};
+
+static int __init armctrl_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ void __iomem *base;
+ int irq, b, i;
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("%s: unable to map IC registers\n",
+ node->full_name);
+
+ intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
+ &armctrl_ops, NULL);
+ if (!intc.domain)
+ panic("%s: unable to create IRQ domain\n", node->full_name);
+
+ for (b = 0; b < NR_BANKS; b++) {
+ intc.pending[b] = base + reg_pending[b];
+ intc.enable[b] = base + reg_enable[b];
+ intc.disable[b] = base + reg_disable[b];
+
+ for (i = 0; i < bank_irqs[b]; i++) {
+ irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
+ BUG_ON(irq <= 0);
+ irq_set_chip_and_handler(irq, &armctrl_chip,
+ handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+ return 0;
+}
+
+static struct of_device_id irq_of_match[] __initconst = {
+ { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
+};
+
+void __init bcm2835_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+/*
+ * Handle each interrupt across the entire interrupt controller. This reads the
+ * status register before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+
+static void armctrl_handle_bank(int bank, struct pt_regs *regs)
+{
+ u32 stat, irq;
+
+ while ((stat = readl_relaxed(intc.pending[bank]))) {
+ irq = MAKE_HWIRQ(bank, ffs(stat) - 1);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+ }
+}
+
+static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
+ u32 stat)
+{
+ u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+}
+
+asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+ struct pt_regs *regs)
+{
+ u32 stat, irq;
+
+ while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) {
+ if (stat & BANK0_HWIRQ_MASK) {
+ irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
+ handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
+ } else if (stat & SHORTCUT1_MASK) {
+ armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK);
+ } else if (stat & SHORTCUT2_MASK) {
+ armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK);
+ } else if (stat & BANK1_HWIRQ) {
+ armctrl_handle_bank(1, regs);
+ } else if (stat & BANK2_HWIRQ) {
+ armctrl_handle_bank(2, regs);
+ } else {
+ BUG();
+ }
+ }
+}
mp->minor = minor;
- dev = tty_register_device(capinc_tty_driver, minor, NULL);
+ dev = tty_port_register_device(&mp->port, capinc_tty_driver, minor,
+ NULL);
if (IS_ERR(dev))
goto err_out2;
goto out;
}
- iflag = tty->termios->c_iflag;
- cflag = tty->termios->c_cflag;
+ iflag = tty->termios.c_iflag;
+ cflag = tty->termios.c_cflag;
old_cflag = old ? old->c_cflag : cflag;
gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
cs->minor_index, iflag, cflag, old_cflag);
tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs);
mutex_lock(&cs->mutex);
- cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL);
+ cs->tty_dev = tty_port_register_device(&cs->port, drv->tty,
+ cs->minor_index, NULL);
if (!IS_ERR(cs->tty_dev))
dev_set_drvdata(cs->tty_dev, cs);
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&fc->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modehdlc(bch, ISDN_P_NONE);
spin_unlock_irqrestore(&fc->lock, flags);
ch->protocol = ISDN_P_NONE;
printk(KERN_INFO
"HFC-E1 #%d has overlapping B-channels on fragment #%d\n",
E1_cnt + 1, pt);
+ kfree(hc);
return -EINVAL;
}
maskcheck |= hc->bmask[pt];
if ((poll >> 1) > sizeof(hc->silence_data)) {
printk(KERN_ERR "HFCMULTI error: silence_data too small, "
"please fix\n");
+ kfree(hc);
return -EINVAL;
}
for (i = 0; i < (poll >> 1); i++)
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(hx->ip->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
hscx_mode(hx, ISDN_P_NONE);
spin_unlock_irqrestore(hx->ip->hwlock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(ich->is->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modeisar(ich, ISDN_P_NONE);
spin_unlock_irqrestore(ich->is->hwlock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
mode_tiger(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
w6692_mode(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
quot;
int i;
- if (!port->tty || !port->tty->termios)
+ if (!port->tty)
return;
- cflag = port->tty->termios->c_cflag;
+ cflag = port->tty->termios.c_cflag;
quot = i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 2)
- port->tty->termios->c_cflag &= ~CBAUDEX;
+ port->tty->termios.c_cflag &= ~CBAUDEX;
else
i += 15;
}
#endif
isdn_unlock_drivers();
info->msr &= ~UART_MSR_RI;
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
isdn_tty_modem_reset_regs(info, 0);
if (!old_termios)
isdn_tty_change_speed(info);
else {
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_ispeed == old_termios->c_ispeed &&
- tty->termios->c_ospeed == old_termios->c_ospeed)
+ if (tty->termios.c_cflag == old_termios->c_cflag &&
+ tty->termios.c_ispeed == old_termios->c_ispeed &&
+ tty->termios.c_ospeed == old_termios->c_ospeed)
return;
isdn_tty_change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
+ !(tty->termios.c_cflag & CRTSCTS))
tty->hw_stopped = 0;
}
}
* ------------------------------------------------------------
*/
+static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ modem_info *info = &dev->mdm.info[tty->index];
+
+ if (isdn_tty_paranoia_check(info, tty->name, __func__))
+ return -ENODEV;
+
+ tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
static int
isdn_tty_open(struct tty_struct *tty, struct file *filp)
{
- struct tty_port *port;
- modem_info *info;
+ modem_info *info = tty->driver_data;
+ struct tty_port *port = &info->port;
int retval;
- info = &dev->mdm.info[tty->index];
- if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
- return -ENODEV;
- port = &info->port;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
port->count);
#endif
port->count++;
- tty->driver_data = info;
port->tty = tty;
- tty->port = port;
/*
* Start up serial port
*/
}
static const struct tty_operations modem_ops = {
+ .install = isdn_tty_install,
.open = isdn_tty_open,
.close = isdn_tty_close,
.write = isdn_tty_write,
m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
m->tty_modem->init_termios = tty_std_termios;
m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
m->tty_modem->driver_name = "isdn_tty";
tty_set_operations(m->tty_modem, &modem_ops);
retval = tty_register_driver(m->tty_modem);
ch->next_minlen = ch->init_minlen;
ch->maxlen = ch->init_maxlen;
ch->next_maxlen = ch->init_maxlen;
+ skb_queue_purge(&ch->rqueue);
+ ch->rcount = 0;
}
EXPORT_SYMBOL(mISDN_clear_bchannel);
-int
+void
mISDN_freebchannel(struct bchannel *ch)
{
+ cancel_work_sync(&ch->workq);
mISDN_clear_bchannel(ch);
- skb_queue_purge(&ch->rqueue);
- ch->rcount = 0;
- flush_work_sync(&ch->workq);
- return 0;
}
EXPORT_SYMBOL(mISDN_freebchannel);
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
/*
* GPIO extension bus.
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/module.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
/*
* The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
/* our context */
#include <mach/hardware.h>
#include <mach/mux.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <linux/io.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
/*
* CSI registers
#include <linux/videodev2.h>
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
#include <mach/hardware.h>
#include <asm/dma.h>
#include <media/soc_mediabus.h>
#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/dma.h>
+#include <linux/platform_data/camera-mx3.h>
+#include <linux/platform_data/dma-imx.h>
#define MX3_CAM_DRV_NAME "mx3-camera"
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/vrfb.h>
#include <video/omapdss.h>
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <plat/cpu.h>
+
#include "isp.h"
#include "ispreg.h"
#include "ispccdc.h"
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#define PXA_CAM_VERSION "0.0.6"
#define PXA_CAM_DRV_NAME "pxa27x-camera"
#include <linux/spinlock.h>
#include <linux/videodev2.h>
#include <media/v4l2-subdev.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include "mipi-csis.h"
static int debug;
ret =
mfd_add_devices(chip->dev, 0, &onkey_devs[0],
- ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0);
+ ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
rtc_devs[0].platform_data = pdata->rtc;
rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata);
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
- ARRAY_SIZE(rtc_devs), NULL, 0);
+ ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out_dev;
}
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add codec subdev\n");
goto out_codec;
bk_devs[i].resources = &bk_resources[j];
ret = mfd_add_devices(chip->dev, 0,
&bk_devs[i], 1,
- &bk_resources[j], 0);
+ &bk_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"backlight subdev\n");
led_devs[i].resources = &led_resources[j],
ret = mfd_add_devices(chip->dev, 0,
&led_devs[i], 1,
- &led_resources[j], 0);
+ &led_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"led subdev\n");
regulator_devs[i].resources = ®ulator_resources[seq];
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1,
- ®ulator_resources[seq], 0);
+ ®ulator_resources[seq], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out;
rtc_devs[0].resources = &rtc_resources[0];
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs), &rtc_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add rtc subdev\n");
}
touch_devs[0].resources = &touch_resources[0];
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs), &touch_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add touch subdev\n");
}
power_devs[0].num_resources = ARRAY_SIZE(battery_resources);
power_devs[0].resources = &battery_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1,
- &battery_resources[0], chip->irq_base);
+ &battery_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add battery subdev\n");
power_devs[1].num_resources = ARRAY_SIZE(charger_resources);
power_devs[1].resources = &charger_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1,
- &charger_resources[0], chip->irq_base);
+ &charger_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add charger subdev\n");
power_devs[2].num_resources = ARRAY_SIZE(preg_resources);
power_devs[2].resources = &preg_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1,
- &preg_resources[0], chip->irq_base);
+ &preg_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add preg subdev\n");
}
onkey_devs[0].resources = &onkey_resources[0],
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs), &onkey_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add onkey subdev\n");
}
codec_devs[0].num_resources = ARRAY_SIZE(codec_resources);
codec_devs[0].resources = &codec_resources[0],
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add codec subdev\n");
}
}
ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
- ARRAY_SIZE(aat2870_devs), NULL, 0);
+ ARRAY_SIZE(aat2870_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
goto out_disable;
}
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
- ARRAY_SIZE(ab3100_devs), NULL, 0);
+ ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
ab3100_setup_debugfs(ab3100);
ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
ARRAY_SIZE(abx500_common_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500) || is_ab8505(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs,
ARRAY_SIZE(ab9540_ab8505_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
/* Add battery management devices */
ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
ARRAY_SIZE(ab8500_bm_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
dev_err(ab8500->dev, "error adding bm devices\n");
}
}
ret = mfd_add_devices(arizona->dev, -1, early_devs,
- ARRAY_SIZE(early_devs), NULL, 0);
+ ARRAY_SIZE(early_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(dev, "Failed to add early children: %d\n", ret);
return ret;
switch (arizona->type) {
case WM5102:
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
case WM5110:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
}
if (pdata->clock_rate) {
ds1wm_pdata.clock_rate = pdata->clock_rate;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_ds1wm, 1, mem, asic->irq_base);
+ &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
if (ret < 0)
goto out;
}
if (mem_sdio && (irq >= 0)) {
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_mmc, 1, mem_sdio, irq);
+ &asic3_cell_mmc, 1, mem_sdio, irq, NULL);
if (ret < 0)
goto out;
}
asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
}
ret = mfd_add_devices(&pdev->dev, 0,
- asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0);
+ asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
}
out:
}
err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells,
- ARRAY_SIZE(cs5535_mfd_cells), NULL, 0);
+ ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL);
if (err) {
dev_err(&pdev->dev, "MFD add devices failed: %d\n", err);
goto err_disable;
dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret);
ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
- ARRAY_SIZE(da9052_subdev_info), NULL, 0);
+ ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL);
if (ret)
goto err;
cell->pdata_size = sizeof(*davinci_vc);
ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells,
- DAVINCI_VC_CELLS, NULL, 0);
+ DAVINCI_VC_CELLS, NULL, 0, NULL);
if (ret != 0) {
dev_err(&pdev->dev, "fail to register client devices\n");
goto fail4;
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+/* Functions definition */
+static void compute_armss_rate(void);
+
/* Spinlocks */
static DEFINE_SPINLOCK(prcmu_lock);
static DEFINE_SPINLOCK(clkout_lock);
}
};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
(mb1_transfer.ack.arm_opp != opp))
r = -EIO;
+ compute_armss_rate();
mutex_unlock(&mb1_transfer.lock);
return r;
if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
(val & PRCM_PLL_FREQ_DIV2EN) &&
((reg == PRCM_PLLSOC0_FREQ) ||
+ (reg == PRCM_PLLARM_FREQ) ||
(reg == PRCM_PLLDDR_FREQ))))
div *= 2;
else
return 0;
}
+static unsigned long latest_armss_rate;
+static unsigned long armss_rate(void)
+{
+ return latest_armss_rate;
+}
+
+static void compute_armss_rate(void)
+{
+ u32 r;
+ unsigned long rate;
+
+ r = readl(PRCM_ARM_CHGCLKREQ);
+
+ if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
+ /* External ARMCLKFIX clock */
+
+ rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
+
+ /* Check PRCM_ARM_CHGCLKREQ divider */
+ if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
+ rate /= 2;
+
+ /* Check PRCM_ARMCLKFIX_MGT divider */
+ r = readl(PRCM_ARMCLKFIX_MGT);
+ r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ rate /= r;
+
+ } else {/* ARM PLL */
+ rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
+ }
+
+ latest_armss_rate = rate;
+}
static unsigned long dsiclk_rate(u8 n)
{
return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLSOC1)
return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_ARMSS)
+ return armss_rate();
else if (clock == PRCMU_PLLDDR)
return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLDSI)
handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+ compute_armss_rate();
}
static void __init init_prcm_registers(void)
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
- ARRAY_SIZE(db8500_prcmu_devs), NULL, 0);
+ ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL);
if (err) {
pr_err("prcmu: Failed to add subdevices\n");
return err;
#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16)
#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
/* PRCMU clock/PLL/reset registers */
#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080)
#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088)
#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C)
#define PRCM_PLL_FREQ_D_SHIFT 0
#define PRCM_PLL_FREQ_D_MASK BITS(0, 7)
/* the first 5 PASIC3 registers control the DS1WM */
ds1wm_resources[0].end = (5 << asic->bus_shift) - 1;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &ds1wm_cell, 1, r, irq);
+ &ds1wm_cell, 1, r, irq, NULL);
if (ret < 0)
dev_warn(dev, "failed to register DS1WM\n");
}
if (pdata && pdata->led_pdata) {
led_cell.platform_data = pdata->led_pdata;
led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo);
- ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0);
+ ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r,
+ 0, NULL);
if (ret < 0)
dev_warn(dev, "failed to register LED device\n");
}
continue;
ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
- pdata->irq[i]);
+ pdata->irq[i], NULL);
if (ret)
goto fail;
}
ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
- ARRAY_SIZE(msic_other_devs), NULL, 0);
+ ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
if (ret)
goto fail;
}
return mfd_add_devices(&pdev->dev, 0, priv->cells,
- num_probed, NULL, pdev->irq);
+ num_probed, NULL, pdev->irq, NULL);
}
/*
writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
- ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base);
+ ARRAY_SIZE(jz4740_adc_cells), mem_base,
+ irq_base, NULL);
if (ret < 0)
goto err_clk_put;
lm3533_als_devs[0].platform_data = pdata->als;
lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0);
+ ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
+ 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add ALS device\n");
return ret;
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
- pdata->num_backlights, NULL, 0);
+ pdata->num_backlights, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add backlight devices\n");
return ret;
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
- pdata->num_leds, NULL, 0);
+ pdata->num_leds, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add LED devices\n");
return ret;
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
gpio_done:
if (acpi_conflict)
u32 base_addr_cfg;
u32 base_addr;
int ret;
- bool acpi_conflict = false;
struct resource *res;
/* Setup power management base register */
res = wdt_io_res(ICH_RES_IO_TCO);
res->start = base_addr + ACPIBASE_TCO_OFF;
res->end = base_addr + ACPIBASE_TCO_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
res = wdt_io_res(ICH_RES_IO_SMI);
res->start = base_addr + ACPIBASE_SMI_OFF;
res->end = base_addr + ACPIBASE_SMI_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
+
lpc_ich_enable_acpi_space(dev);
/*
res = wdt_mem_res(ICH_RES_MEM_GCS);
res->start = base_addr + ACPIBASE_GCS_OFF;
res->end = base_addr + ACPIBASE_GCS_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
}
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
wdt_done:
- if (acpi_conflict)
- pr_warn("Resource conflict(s) found affecting %s\n",
- lpc_ich_cells[LPC_WDT].name);
return ret;
}
lpc_sch_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0,
- lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
+ lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL,
+ 0, NULL);
if (ret)
goto out_dev;
tunnelcreek_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells,
- ARRAY_SIZE(tunnelcreek_cells), NULL, 0);
+ ARRAY_SIZE(tunnelcreek_cells), NULL,
+ 0, NULL);
}
return ret;
max77686_irq_init(max77686);
ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
- ARRAY_SIZE(max77686_devs), NULL, 0);
+ ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
else
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] |= irq_data->mask;
else
if (irq_src & MAX77693_IRQSRC_MUIC)
/* MUIC INT1 ~ INT3 */
- max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1,
+ max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1,
MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]);
/* Apply masking */
{
struct irq_domain *domain;
int i;
- int ret;
+ int ret = 0;
+ u8 intsrc_mask;
mutex_init(&max77693->irqlock);
&max77693_irq_domain_ops, max77693);
if (!domain) {
dev_err(max77693->dev, "could not create irq domain\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_irq;
}
max77693->irq_domain = domain;
+ /* Unmask max77693 interrupt */
+ ret = max77693_read_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to read PMIC register\n");
+ goto err_irq;
+ }
+
+ intsrc_mask &= ~(MAX77693_IRQSRC_CHG);
+ intsrc_mask &= ~(MAX77693_IRQSRC_FLASH);
+ intsrc_mask &= ~(MAX77693_IRQSRC_MUIC);
+ ret = max77693_write_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to write PMIC register\n");
+ goto err_irq;
+ }
+
ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"max77693-irq", max77693);
-
if (ret)
dev_err(max77693->dev, "Failed to request IRQ %d: %d\n",
max77693->irq, ret);
- return 0;
+err_irq:
+ return ret;
}
void max77693_irq_exit(struct max77693_dev *max77693)
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
i2c_set_clientdata(max77693->haptic, max77693);
+ /*
+ * Initialize register map for MUIC device because use regmap-muic
+ * instance of MUIC device when irq of max77693 is initialized
+ * before call max77693-muic probe() function.
+ */
+ max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
+ &max77693_regmap_config);
+ if (IS_ERR(max77693->regmap_muic)) {
+ ret = PTR_ERR(max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
+
ret = max77693_irq_init(max77693);
if (ret < 0)
goto err_irq;
pm_runtime_set_active(max77693->dev);
ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
- ARRAY_SIZE(max77693_devs), NULL, 0);
+ ARRAY_SIZE(max77693_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs),
- &rtc_resources[0], chip->irq_base);
+ &rtc_resources[0], chip->irq_base, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out;
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs),
- &onkey_resources[0], 0);
+ &onkey_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
if (pdata) {
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
ARRAY_SIZE(regulator_devs),
- ®ulator_resources[0], 0);
+ ®ulator_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out_dev;
if (pdata && pdata->backlight) {
ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0],
ARRAY_SIZE(backlight_devs),
- &backlight_resources[0], 0);
+ &backlight_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add backlight subdev\n");
goto out_dev;
if (pdata && pdata->power) {
ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
ARRAY_SIZE(power_devs),
- &power_supply_resources[0], 0);
+ &power_supply_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add power supply "
"subdev\n");
if (pdata && pdata->touch) {
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs),
- &touch_resources[0], 0);
+ &touch_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add touch subdev\n");
goto out_dev;
mfd_add_devices(max8997->dev, -1, max8997_devs,
ARRAY_SIZE(max8997_devs),
- NULL, 0);
+ NULL, 0, NULL);
/*
* TODO: enable others (flash, muic, rtc, battery, ...) and
switch (id->driver_data) {
case TYPE_LP3974:
ret = mfd_add_devices(max8998->dev, -1,
- lp3974_devs, ARRAY_SIZE(lp3974_devs),
- NULL, 0);
+ lp3974_devs, ARRAY_SIZE(lp3974_devs),
+ NULL, 0, NULL);
break;
case TYPE_MAX8998:
ret = mfd_add_devices(max8998->dev, -1,
- max8998_devs, ARRAY_SIZE(max8998_devs),
- NULL, 0);
+ max8998_devs, ARRAY_SIZE(max8998_devs),
+ NULL, 0, NULL);
break;
default:
ret = -EINVAL;
if (!cell.name)
return -ENOMEM;
- return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL);
}
static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#define DRIVER_NAME "sa11x0-mcp"
static int mfd_add_device(struct device *parent, int id,
const struct mfd_cell *cell,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
struct resource *res;
struct platform_device *pdev;
struct device_node *np = NULL;
- struct irq_domain *domain = NULL;
int ret = -ENOMEM;
int r;
for_each_child_of_node(parent->of_node, np) {
if (of_device_is_compatible(np, cell->of_compatible)) {
pdev->dev.of_node = np;
- domain = irq_find_host(parent->of_node);
break;
}
}
int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
int i;
int ret = 0;
for (i = 0; i < n_devs; i++) {
atomic_set(&cnts[i], 0);
cells[i].usage_count = &cnts[i];
- ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base);
+ ret = mfd_add_device(parent, id, cells + i, mem_base,
+ irq_base, domain);
if (ret)
break;
}
for (i = 0; i < n_clones; i++) {
cell_entry.name = clones[i];
/* don't give up if a single call fails; just report error */
- if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0))
+ if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0,
+ NULL))
dev_err(dev, "failed to create platform device '%s'\n",
clones[i]);
}
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
- NULL, regmap_irq_chip_get_base(palmas->irq_data));
+ NULL, regmap_irq_chip_get_base(palmas->irq_data),
+ NULL);
kfree(children);
if (ret < 0)
}
ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
- ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
+ ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
goto err_add_devs;
rdc321x_wdt_pdata.sb_pdev = pdev;
return mfd_add_devices(&pdev->dev, -1,
- rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
+ NULL, 0, NULL);
}
static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
switch (sec_pmic->device_type) {
case S5M8751X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
- ARRAY_SIZE(s5m8751_devs), NULL, 0);
+ ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
break;
case S5M8763X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
- ARRAY_SIZE(s5m8763_devs), NULL, 0);
+ ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
break;
case S5M8767X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
- ARRAY_SIZE(s5m8767_devs), NULL, 0);
+ ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
break;
case S2MPS11X:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
- ARRAY_SIZE(s2mps11_devs), NULL, 0);
+ ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
break;
default:
/* If this happens the probe function is problem */
sta2x11_mfd_bar0,
ARRAY_SIZE(sta2x11_mfd_bar0),
&pdev->resource[0],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err);
goto err_disable;
sta2x11_mfd_bar1,
ARRAY_SIZE(sta2x11_mfd_bar1),
&pdev->resource[1],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err);
goto err_disable;
struct mfd_cell *cell, int irq)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
- NULL, stmpe->irq_base + irq);
+ NULL, stmpe->irq_base + irq, NULL);
}
static int __devinit stmpe_devices_init(struct stmpe *stmpe)
ret = mfd_add_devices(&dev->dev, dev->id,
t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
- iomem, t7l66xb->irq_base);
+ iomem, t7l66xb->irq_base, NULL);
if (!ret)
return 0;
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
- ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_gpio), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
- ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
printk(KERN_INFO "Toshiba tc6387xb initialised\n");
ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
- ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+ ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL);
if (!ret)
return 0;
tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data);
ret = mfd_add_devices(&dev->dev, dev->id,
- tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
- iomem, tcpd->irq_base);
+ tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
+ iomem, tcpd->irq_base, NULL);
if (!ret)
return 0;
cells[id].data_size = data->pdata_size;
}
- error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
+ error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
if (error < 0) {
dev_err(dev, "cannot add mfd cells\n");
goto error_enable;
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg0,
ARRAY_SIZE(timberdale_cells_bar0_cfg0),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER1:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg1,
ARRAY_SIZE(timberdale_cells_bar0_cfg1),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER2:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg2,
ARRAY_SIZE(timberdale_cells_bar0_cfg2),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER3:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg3,
ARRAY_SIZE(timberdale_cells_bar0_cfg3),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
default:
dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n",
err = mfd_add_devices(&dev->dev, 0,
timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1),
- &dev->resource[1], msix_entries[0].vector);
+ &dev->resource[1], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) {
err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2,
ARRAY_SIZE(timberdale_cells_bar2),
- &dev->resource[2], msix_entries[0].vector);
+ &dev->resource[2], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
}
ret = mfd_add_devices(&client->dev, 0, tps6105x_cells,
- ARRAY_SIZE(tps6105x_cells), NULL, 0);
+ ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
if (ret)
goto fail;
ret = mfd_add_devices(tps6507x->dev, -1,
tps6507x_devs, ARRAY_SIZE(tps6507x_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL, 0);
+ ARRAY_SIZE(tps65090s), NULL, 0, NULL);
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
-#include <linux/regulator/of_regulator.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
+static struct mfd_cell tps65217s[] = {
+ {
+ .name = "tps65217-pmic",
+ },
+};
+
/**
* tps65217_reg_read: Read a single tps65217 register.
*
}
EXPORT_SYMBOL_GPL(tps65217_clear_bits);
-#ifdef CONFIG_OF
-static struct of_regulator_match reg_matches[] = {
- { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
- { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
- { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
- { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
- { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
- { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
- { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
-};
-
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- struct device_node *node = client->dev.of_node;
- struct tps65217_board *pdata;
- struct device_node *regs;
- int count = ARRAY_SIZE(reg_matches);
- int ret, i;
-
- regs = of_find_node_by_name(node, "regulators");
- if (!regs)
- return NULL;
-
- ret = of_regulator_match(&client->dev, regs, reg_matches, count);
- of_node_put(regs);
- if ((ret < 0) || (ret > count))
- return NULL;
-
- count = ret;
- pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- for (i = 0; i < count; i++) {
- if (!reg_matches[i].init_data || !reg_matches[i].of_node)
- continue;
-
- pdata->tps65217_init_data[i] = reg_matches[i].init_data;
- pdata->of_node[i] = reg_matches[i].of_node;
- }
-
- return pdata;
-}
-
-static struct of_device_id tps65217_of_match[] = {
- { .compatible = "ti,tps65217", },
- { },
-};
-#else
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- return NULL;
-}
-#endif
-
static struct regmap_config tps65217_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
+static const struct of_device_id tps65217_of_match[] = {
+ { .compatible = "ti,tps65217", .data = (void *)TPS65217 },
+ { /* sentinel */ },
+};
+
static int __devinit tps65217_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
- struct regulator_init_data *reg_data;
- struct tps65217_board *pdata = client->dev.platform_data;
- int i, ret;
unsigned int version;
+ unsigned int chip_id = ids->driver_data;
+ const struct of_device_id *match;
+ int ret;
- if (!pdata && client->dev.of_node)
- pdata = tps65217_parse_dt(client);
+ if (client->dev.of_node) {
+ match = of_match_device(tps65217_of_match, &client->dev);
+ if (!match) {
+ dev_err(&client->dev,
+ "Failed to find matching dt id\n");
+ return -EINVAL;
+ }
+ chip_id = (unsigned int)match->data;
+ }
+
+ if (!chip_id) {
+ dev_err(&client->dev, "id is null.\n");
+ return -ENODEV;
+ }
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
- tps->pdata = pdata;
+ i2c_set_clientdata(client, tps);
+ tps->dev = &client->dev;
+ tps->id = chip_id;
+
tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
return ret;
}
- i2c_set_clientdata(client, tps);
- tps->dev = &client->dev;
+ ret = mfd_add_devices(tps->dev, -1, tps65217s,
+ ARRAY_SIZE(tps65217s), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret);
+ return ret;
+ }
ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version);
if (ret < 0) {
(version & TPS65217_CHIPID_CHIP_MASK) >> 4,
version & TPS65217_CHIPID_REV_MASK);
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
- struct platform_device *pdev;
-
- pdev = platform_device_alloc("tps65217-pmic", i);
- if (!pdev) {
- dev_err(tps->dev, "Cannot create regulator %d\n", i);
- continue;
- }
-
- pdev->dev.parent = tps->dev;
- pdev->dev.of_node = pdata->of_node[i];
- reg_data = pdata->tps65217_init_data[i];
- platform_device_add_data(pdev, reg_data, sizeof(*reg_data));
- tps->regulator_pdev[i] = pdev;
-
- platform_device_add(pdev);
- }
-
return 0;
}
static int __devexit tps65217_remove(struct i2c_client *client)
{
struct tps65217 *tps = i2c_get_clientdata(client);
- int i;
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
- platform_device_unregister(tps->regulator_pdev[i]);
+ mfd_remove_devices(tps->dev);
return 0;
}
static const struct i2c_device_id tps65217_id_table[] = {
- {"tps65217", 0xF0},
- {/* end of list */}
+ {"tps65217", TPS65217},
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, tps65217_id_table);
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6586x.h>
#ifdef CONFIG_OF
static struct of_regulator_match tps6586x_matches[] = {
+ { .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS },
{ .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 },
{ .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 },
{ .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 },
struct tps6586x_platform_data *pdata;
struct tps6586x_subdev_info *devs;
struct device_node *regs;
+ const char *sys_rail_name = NULL;
unsigned int count;
unsigned int i, j;
int err;
return NULL;
for (i = 0, j = 0; i < num && j < count; i++) {
+ struct regulator_init_data *reg_idata;
+
if (!tps6586x_matches[i].init_data)
continue;
+ reg_idata = tps6586x_matches[i].init_data;
devs[j].name = "tps6586x-regulator";
devs[j].platform_data = tps6586x_matches[i].init_data;
devs[j].id = (int)tps6586x_matches[i].driver_data;
+ if (devs[j].id == TPS6586X_ID_SYS)
+ sys_rail_name = reg_idata->constraints.name;
+
+ if ((devs[j].id == TPS6586X_ID_LDO_5) ||
+ (devs[j].id == TPS6586X_ID_LDO_RTC))
+ reg_idata->supply_regulator = sys_rail_name;
+
devs[j].of_node = tps6586x_matches[i].of_node;
j++;
}
}
ret = mfd_add_devices(tps6586x->dev, -1,
- tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0);
+ tps6586x_cell, ARRAY_SIZE(tps6586x_cell),
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
goto err_mfd_add;
ret = mfd_add_devices(tps65910->dev, -1,
tps65910s, ARRAY_SIZE(tps65910s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
return ret;
ret = mfd_add_devices(tps65912->dev, -1,
tps65912s, ARRAY_SIZE(tps65912s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap2430())
- osc = clk_get(dev, "osc_ck");
- else
- osc = clk_get(dev, "osc_sys_ck");
-
+ osc = clk_get(dev, "fck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
rate = clk_get_rate(osc);
clk_put(osc);
-#else
- /* REVISIT for non-OMAP systems, pass the clock rate from
- * board init code, using platform_data.
- */
- osc = ERR_PTR(-EIO);
-
- printk(KERN_WARNING "Skipping twl internal clock init and "
- "using bootloader value (unknown osc rate)\n");
-
- return;
-#endif
-
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
{
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
+ struct platform_device *pdev;
int irq_base = 0;
int status;
unsigned i, num_slaves;
+ pdev = platform_device_alloc(DRIVER_NAME, -1);
+ if (!pdev) {
+ dev_err(&client->dev, "can't alloc pdev\n");
+ return -ENOMEM;
+ }
+
+ status = platform_device_add(pdev);
+ if (status) {
+ platform_device_put(pdev);
+ return status;
+ }
+
if (node && !pdata) {
/*
* XXX: Temporary pdata until the information is correctly
pdata = devm_kzalloc(&client->dev,
sizeof(struct twl4030_platform_data),
GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ if (!pdata) {
+ status = -ENOMEM;
+ goto free;
+ }
}
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
- return -EINVAL;
+ status = -EINVAL;
+ goto free;
}
+ platform_set_drvdata(pdev, pdata);
+
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
- return -EIO;
+ status = -EIO;
+ goto free;
}
if (inuse) {
dev_dbg(&client->dev, "driver is already in use\n");
- return -EBUSY;
+ status = -EBUSY;
+ goto free;
}
if ((id->driver_data) & TWL6030_CLASS) {
inuse = true;
/* setup clock framework */
- clocks_init(&client->dev, pdata->clock);
+ clocks_init(&pdev->dev, pdata->clock);
/* read TWL IDCODE Register */
if (twl_id == TWL4030_CLASS_ID) {
fail:
if (status < 0)
twl_remove(client);
+free:
+ if (status < 0)
+ platform_device_unregister(pdev);
return status;
}
if (childs)
ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells,
- childs, NULL, 0);
+ childs, NULL, 0, NULL);
else {
dev_err(&pdev->dev, "No platform data found for childs\n");
ret = -ENODEV;
}
ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
- NULL, 0);
+ NULL, 0, NULL);
if (ret)
goto mfd_err;
vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3;
ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells),
- NULL, 0);
+ NULL, 0, NULL);
/* we always return -ENODEV here in order to enable other
* drivers like old, not-yet-platform_device ported i2c-viapro */
__func__, children);
r = mfd_add_devices(&client->dev, -1, core->cells,
- children, NULL, 0);
+ children, NULL, 0, NULL);
if (r)
goto err;
case WM8310:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8310_devs, ARRAY_SIZE(wm8310_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8311:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8311_devs, ARRAY_SIZE(wm8311_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8312:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8312_devs, ARRAY_SIZE(wm8312_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8320:
case WM8326:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
default:
if (ret & WM831X_XTAL_ENA) {
ret = mfd_add_devices(wm831x->dev, wm831x_num,
rtc_devs, ARRAY_SIZE(rtc_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
goto err_irq;
/* Treat errors as non-critical */
ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
ARRAY_SIZE(backlight_devs), NULL,
- 0);
+ 0, NULL);
if (ret < 0)
dev_err(wm831x->dev, "Failed to add backlight: %d\n",
ret);
.pdata_size = sizeof(*wm8400),
};
- return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL);
}
/*
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_regulator_devs,
ARRAY_SIZE(wm8994_regulator_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err;
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_devs, ARRAY_SIZE(wm8994_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err_irq;
void ibmasm_register_uart(struct service_processor *sp)
{
- struct uart_port uport;
+ struct uart_8250_port uart;
void __iomem *iomem_base;
iomem_base = sp->base_address + SCOUT_COM_B_BASE;
return;
}
- memset(&uport, 0, sizeof(struct uart_port));
- uport.irq = sp->irq;
- uport.uartclk = 3686400;
- uport.flags = UPF_SHARE_IRQ;
- uport.iotype = UPIO_MEM;
- uport.membase = iomem_base;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.irq = sp->irq;
+ uart.port.uartclk = 3686400;
+ uart.port.flags = UPF_SHARE_IRQ;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.membase = iomem_base;
- sp->serial_line = serial8250_register_port(&uport);
+ sp->serial_line = serial8250_register_8250_port(&uart);
if (sp->serial_line < 0) {
dev_err(sp->dev, "Failed to register serial port\n");
return;
};
struct pti_dev {
- struct tty_port port;
+ struct tty_port port[PTITTY_MINOR_NUM];
unsigned long pti_addr;
unsigned long aperture_base;
void __iomem *pti_ioaddr;
*/
static DEFINE_MUTEX(alloclock);
-static struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] __devinitconst = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
{0}
};
}
EXPORT_SYMBOL_GPL(pti_writedata);
-/**
- * pti_pci_remove()- Driver exit method to remove PTI from
- * PCI bus.
- * @pdev: variable containing pci info of PTI.
- */
-static void __devexit pti_pci_remove(struct pci_dev *pdev)
-{
- struct pti_dev *drv_data;
-
- drv_data = pci_get_drvdata(pdev);
- if (drv_data != NULL) {
- pci_iounmap(pdev, drv_data->pti_ioaddr);
- pci_set_drvdata(pdev, NULL);
- kfree(drv_data);
- pci_release_region(pdev, 1);
- pci_disable_device(pdev);
- }
-}
-
/*
* for the tty_driver_*() basic function descriptions, see tty_driver.h.
* Specific header comments made for PTI-related specifics.
* also removes a locking requirement for the actual write
* procedure.
*/
- return tty_port_open(&drv_data->port, tty, filp);
+ return tty_port_open(tty->port, tty, filp);
}
/**
*/
static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp)
{
- tty_port_close(&drv_data->port, tty, filp);
+ tty_port_close(tty->port, tty, filp);
}
/**
static int __devinit pti_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ unsigned int a;
int retval = -EINVAL;
int pci_bar = 1;
__func__, __LINE__);
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
- return retval;
+ goto err;
}
retval = pci_enable_device(pdev);
dev_err(&pdev->dev,
"%s: pci_enable_device() returned error %d\n",
__func__, retval);
- return retval;
+ goto err_unreg_misc;
}
drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
-
if (drv_data == NULL) {
retval = -ENOMEM;
dev_err(&pdev->dev,
"%s(%d): kmalloc() returned NULL memory.\n",
__func__, __LINE__);
- return retval;
+ goto err_disable_pci;
}
drv_data->pti_addr = pci_resource_start(pdev, pci_bar);
dev_err(&pdev->dev,
"%s(%d): pci_request_region() returned error %d\n",
__func__, __LINE__, retval);
- kfree(drv_data);
- return retval;
+ goto err_free_dd;
}
drv_data->aperture_base = drv_data->pti_addr+APERTURE_14;
drv_data->pti_ioaddr =
ioremap_nocache((u32)drv_data->aperture_base,
APERTURE_LEN);
if (!drv_data->pti_ioaddr) {
- pci_release_region(pdev, pci_bar);
retval = -ENOMEM;
- kfree(drv_data);
- return retval;
+ goto err_rel_reg;
}
pci_set_drvdata(pdev, drv_data);
- tty_port_init(&drv_data->port);
- drv_data->port.ops = &tty_port_ops;
+ for (a = 0; a < PTITTY_MINOR_NUM; a++) {
+ struct tty_port *port = &drv_data->port[a];
+ tty_port_init(port);
+ port->ops = &tty_port_ops;
- tty_register_device(pti_tty_driver, 0, &pdev->dev);
- tty_register_device(pti_tty_driver, 1, &pdev->dev);
+ tty_port_register_device(port, pti_tty_driver, a, &pdev->dev);
+ }
register_console(&pti_console);
+ return 0;
+err_rel_reg:
+ pci_release_region(pdev, pci_bar);
+err_free_dd:
+ kfree(drv_data);
+err_disable_pci:
+ pci_disable_device(pdev);
+err_unreg_misc:
+ misc_deregister(&pti_char_driver);
+err:
return retval;
}
+/**
+ * pti_pci_remove()- Driver exit method to remove PTI from
+ * PCI bus.
+ * @pdev: variable containing pci info of PTI.
+ */
+static void __devexit pti_pci_remove(struct pci_dev *pdev)
+{
+ struct pti_dev *drv_data = pci_get_drvdata(pdev);
+
+ unregister_console(&pti_console);
+
+ tty_unregister_device(pti_tty_driver, 0);
+ tty_unregister_device(pti_tty_driver, 1);
+
+ iounmap(drv_data->pti_ioaddr);
+ pci_set_drvdata(pdev, NULL);
+ kfree(drv_data);
+ pci_release_region(pdev, 1);
+ pci_disable_device(pdev);
+
+ misc_deregister(&pti_char_driver);
+}
+
static struct pci_driver pti_pci_driver = {
.name = PCINAME,
.id_table = pci_ids,
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
- pti_tty_driver = NULL;
- return retval;
+ goto put_tty;
}
retval = pci_register_driver(&pti_pci_driver);
-
if (retval) {
pr_err("%s(%d): PCI registration failed of pti driver\n",
__func__, __LINE__);
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
-
- tty_unregister_driver(pti_tty_driver);
- pr_err("%s(%d): Unregistering TTY part of pti driver\n",
- __func__, __LINE__);
- pti_tty_driver = NULL;
- return retval;
+ goto unreg_tty;
}
+ return 0;
+unreg_tty:
+ tty_unregister_driver(pti_tty_driver);
+put_tty:
+ put_tty_driver(pti_tty_driver);
+ pti_tty_driver = NULL;
return retval;
}
*/
static void __exit pti_exit(void)
{
- int retval;
-
- tty_unregister_device(pti_tty_driver, 0);
- tty_unregister_device(pti_tty_driver, 1);
-
- retval = tty_unregister_driver(pti_tty_driver);
- if (retval) {
- pr_err("%s(%d): TTY unregistration failed of pti driver\n",
- __func__, __LINE__);
- pr_err("%s(%d): Error value returned: %d\n",
- __func__, __LINE__, retval);
- }
-
+ tty_unregister_driver(pti_tty_driver);
pci_unregister_driver(&pti_pci_driver);
-
- retval = misc_deregister(&pti_char_driver);
- if (retval) {
- pr_err("%s(%d): CHAR unregistration failed of pti driver\n",
- __func__, __LINE__);
- pr_err("%s(%d): Error value returned: %d\n",
- __func__, __LINE__, retval);
- }
-
- unregister_console(&pti_console);
- return;
+ put_tty_driver(pti_tty_driver);
}
module_init(pti_init);
if (status & UART_MSR_DCTS) {
port->icount.cts++;
tty = tty_port_tty_get(&port->port);
- if (tty && (tty->termios->c_cflag & CRTSCTS)) {
+ if (tty && (tty->termios.c_cflag & CRTSCTS)) {
int cts = (status & UART_MSR_CTS);
if (tty->hw_stopped) {
if (cts) {
port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
port->mctrl = TIOCM_OUT2;
- sdio_uart_change_speed(port, tty->termios, NULL);
+ sdio_uart_change_speed(port, &tty->termios, NULL);
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
tty->hw_stopped = 1;
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
return;
if (sdio_uart_claim_func(port) != 0)
sdio_uart_start_tx(port);
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
sdio_uart_clear_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
return;
if (sdio_uart_claim_func(port) != 0)
}
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
sdio_uart_set_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
struct ktermios *old_termios)
{
struct sdio_uart_port *port = tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
if (sdio_uart_claim_func(port) != 0)
return;
- sdio_uart_change_speed(port, tty->termios, old_termios);
+ sdio_uart_change_speed(port, &tty->termios, old_termios);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
kfree(port);
} else {
struct device *dev;
- dev = tty_register_device(sdio_uart_tty_driver,
- port->index, &func->dev);
+ dev = tty_port_register_device(&port->port,
+ sdio_uart_tty_driver, port->index, &func->dev);
if (IS_ERR(dev)) {
sdio_uart_port_remove(port);
ret = PTR_ERR(dev);
#include <linux/dma-mapping.h>
#include <linux/mmc/mmc.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
#include <mach/edma.h>
/*
#include <asm/div64.h>
#include <asm/sizes.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include <mach/clk.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "mvsdio.h"
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
#include <asm/io.h>
#include <asm/irq.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "pxamci.h"
#include <mach/regs-sdi.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
#include <asm/gpio.h>
#include <mach/gpio-tegra.h>
-#include <mach/sdhci.h>
+#include <linux/platform_data/mmc-sdhci-tegra.h>
#include "sdhci-pltfm.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <asm/io.h>
-#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <linux/gpio.h>
-#include <plat/board-ams-delta.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <mach/hardware.h>
/*
* MTD structure for E3 (Delta)
int bcm_umi_nand_inithw(void)
{
/* Configure nand timing parameters */
- REG_UMI_NAND_TCR &= ~0x7ffff;
- REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
+ writel(readl(®_UMI_NAND_TCR) & ~0x7ffff, ®_UMI_NAND_TCR);
+ writel(readl(®_UMI_NAND_TCR) | HW_CFG_NAND_TCR, ®_UMI_NAND_TCR);
#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
/* enable software control of CS */
- REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
+ writel(readl(®_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, ®_UMI_NAND_TCR);
#endif
/* keep NAND chip select asserted */
- REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
+ writel(readl(®_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, ®_UMI_NAND_RCSR);
- REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
+ writel(readl(®_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, ®_UMI_NAND_TCR);
/* enable writes to flash */
- REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
+ writel(readl(®_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, ®_UMI_MMD_ICR);
writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
nand_bcm_umi_wait_till_ready();
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
-#include <mach/nand.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
/*
* This is a device driver for the NAND flash controller found on the
#include <linux/of_mtd.h>
#include <asm/mach/flash.h>
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
#include <mach/hardware.h>
#define DRIVER_NAME "mxc_nand"
/* ---- Include Files ---------------------------------------------------- */
#include <mach/reg_umi.h>
#include <mach/reg_nand.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
/* ---- Constants and Types ---------------------------------------------- */
#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
/* Check in device is ready */
static inline int nand_bcm_umi_dev_ready(void)
{
- return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
+ return readl(®_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY;
}
/* Wait until device is ready */
static inline void nand_bcm_umi_hamming_enable_hwecc(void)
{
/* disable and reset ECC, 512 byte page */
- REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
- REG_UMI_NAND_ECC_CSR_256BYTE);
+ writel(readl(®_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
+ REG_UMI_NAND_ECC_CSR_256BYTE), ®_UMI_NAND_ECC_CSR);
/* enable ECC */
- REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
+ writel(readl(®_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE,
+ ®_UMI_NAND_ECC_CSR);
}
#if NAND_ECC_BCH
static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, ®_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Enable BCH Write ECC */
static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, ®_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Config number of BCH ECC bytes */
uint32_t numBits = numEccBytes * 8;
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
- REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
+ REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID,
+ ®_UMI_BCH_CTRL_STATUS);
/* Every correctible bit requires 13 ECC bits */
tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);
kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);
/* Write the settings */
- REG_UMI_BCH_N = nValue;
- REG_UMI_BCH_T = tValue;
- REG_UMI_BCH_K = kValue;
+ writel(nValue, ®_UMI_BCH_N);
+ writel(tValue, ®_UMI_BCH_T);
+ writel(kValue, ®_UMI_BCH_K);
}
/* Pause during ECC read calculation to skip bytes in OOB */
static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
- REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, ®_UMI_BCH_CTRL_STATUS);
}
/* Resume during ECC read calculation after skipping bytes in OOB */
static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Poll read ECC calc to check when hardware completes */
do {
/* wait for ECC to be valid */
- regVal = REG_UMI_BCH_CTRL_STATUS;
+ regVal = readl(®_UMI_BCH_CTRL_STATUS);
} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);
return regVal;
static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
{
/* wait for ECC to be valid */
- while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
+ while ((readl(®_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
== 0)
;
}
if (pageSize != NAND_DATA_ACCESS_SIZE) {
/* skip BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
while (numToRead > numEccBytes) {
/* skip free oob region */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
while (numToRead > 11) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(®_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(®_NAND_DATA8);
#endif
numToRead--;
}
if (numToRead == 11) {
/* read BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
nand_bcm_umi_bch_resume_read_ecc_calc();
while (numToRead) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(®_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(®_NAND_DATA8);
#endif
numToRead--;
}
if (pageSize == NAND_DATA_ACCESS_SIZE) {
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(®_UMI_BCH_WR_ECC_3);
/* Usually we skip CM in oob[0,1] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
eccVal & 0xff); /* ECC 12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(®_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
(eccVal >> 24) & 0xff); /* ECC11 */
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(®_UMI_BCH_WR_ECC_3);
/* Usually skip CM in oob[1,2] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
eccVal & 0xff); /* ECC12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(®_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
(eccVal >> 24) & 0xff); /* ECC11 */
eccVal & 0xff); /* ECC8 */
if (numEccBytes >= 5)
- eccVal = REG_UMI_BCH_WR_ECC_1;
+ eccVal = readl(®_UMI_BCH_WR_ECC_1);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
(eccVal >> 24) & 0xff); /* ECC7 */
eccVal & 0xff); /* ECC4 */
if (numEccBytes >= 1)
- eccVal = REG_UMI_BCH_WR_ECC_0;
+ eccVal = readl(®_UMI_BCH_WR_ECC_0);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
(eccVal >> 24) & 0xff); /* ECC3 */
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include <mtd/mtd-abi.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
#define OMAP_NAND_TIMEOUT_MS 5000
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define ECC_CONFIG_CS_SHIFT 1
+#define CS_MASK 0x7
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE1_SHIFT 22
+#define ECC1RESULTSIZE 0x1
+#define ECCCLEAR 0x100
+#define ECC1 0x1
+
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
int gpmc_cs;
unsigned long phys_base;
+ unsigned long mem_size;
struct completion comp;
struct dma_chan *dma;
- int gpmc_irq;
+ int gpmc_irq_fifo;
+ int gpmc_irq_count;
enum {
OMAP_NAND_IO_READ = 0, /* read */
OMAP_NAND_IO_WRITE, /* write */
} iomode;
u_char *buf;
int buf_len;
+ struct gpmc_nand_regs reg;
#ifdef CONFIG_MTD_NAND_OMAP_BCH
struct bch_control *bch;
#endif
};
+/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
+ unsigned int u32_count, int is_write, struct omap_nand_info *info)
+{
+ u32 val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -1;
+
+ if (readl(info->reg.gpmc_prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(u32_count, info->reg.gpmc_prefetch_config2);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
+ (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+ writel(val, info->reg.gpmc_prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(0x1, info->reg.gpmc_prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
+{
+ u32 config1;
+
+ /* check if the same module/cs is trying to reset */
+ config1 = readl(info->reg.gpmc_prefetch_config1);
+ if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs)
+ return -EINVAL;
+
+ /* Stop the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_control);
+
+ /* Reset/disable the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_config1);
+
+ return 0;
+}
+
/**
* omap_hwcontrol - hardware specific access to control-lines
* @mtd: MTD device structure
if (cmd != NAND_CMD_NONE) {
if (ctrl & NAND_CLE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd);
+ writeb(cmd, info->reg.gpmc_nand_command);
else if (ctrl & NAND_ALE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd);
+ writeb(cmd, info->reg.gpmc_nand_address);
else /* NAND_NCE */
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd);
+ writeb(cmd, info->reg.gpmc_nand_data);
}
}
iowrite8(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
iowrite16(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
omap_read_buf8(mtd, (u_char *)p, len);
} else {
do {
- r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ r_count = readl(info->reg.gpmc_prefetch_status);
+ r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
len -= r_count << 2;
} while (len);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
int i = 0, ret = 0;
u16 *p = (u16 *)buf;
unsigned long tim, limit;
+ u32 val;
/* take care of subpage writes */
if (len % 2 != 0) {
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
omap_write_buf8(mtd, (u_char *)p, len);
} else {
while (len) {
- w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ w_count = readl(info->reg.gpmc_prefetch_status);
+ w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
tim = 0;
limit = (loops_per_jiffy *
msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
unsigned long tim, limit;
unsigned n;
int ret;
+ u32 val;
if (addr >= high_memory) {
struct page *p1;
tx->callback_param = &info->comp;
dmaengine_submit(tx);
- /* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy_unmap;
wait_for_completion(&info->comp);
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
return 0;
{
struct omap_nand_info *info = (struct omap_nand_info *) dev;
u32 bytes;
- u32 irq_stat;
- irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ bytes = readl(info->reg.gpmc_prefetch_status);
+ bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
if (info->buf_len && (info->buf_len < bytes))
(u32 *)info->buf, bytes >> 2);
info->buf = info->buf + bytes;
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
}
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
return IRQ_HANDLED;
done:
complete(&info->comp);
- /* disable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
- /* clear status */
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+ disable_irq_nosync(info->gpmc_irq_fifo);
+ disable_irq_nosync(info->gpmc_irq_count);
return IRQ_HANDLED;
}
init_completion(&info->comp);
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for read to complete */
wait_for_completion(&info->comp);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
struct omap_nand_info, mtd);
int ret = 0;
unsigned long tim, limit;
+ u32 val;
if (len <= mtd->oobsize) {
omap_write_buf_pref(mtd, buf, len);
init_completion(&info->comp);
/* configure and start prefetch transfer : size=24 */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for write to complete */
wait_for_completion(&info->comp);
+
/* wait for data to flushed-out before reset the prefetch */
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
cpu_relax();
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
+ u32 val;
+
+ val = readl(info->reg.gpmc_ecc_config);
+ if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs)
+ return -EINVAL;
+
+ /* read ecc result */
+ val = readl(info->reg.gpmc_ecc1_result);
+ *ecc_code++ = val; /* P128e, ..., P1e */
+ *ecc_code++ = val >> 16; /* P128o, ..., P1o */
+ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+ return 0;
}
/**
mtd);
struct nand_chip *chip = mtd->priv;
unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ u32 val;
+
+ /* clear ecc and enable bits */
+ val = ECCCLEAR | ECC1;
+ writel(val, info->reg.gpmc_ecc_control);
+
+ /* program ecc and result sizes */
+ val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
+ ECC1RESULTSIZE);
+ writel(val, info->reg.gpmc_ecc_size_config);
- gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+ break;
+ case NAND_ECC_READSYN:
+ writel(ECCCLEAR, info->reg.gpmc_ecc_control);
+ break;
+ default:
+ dev_info(&info->pdev->dev,
+ "error: unrecognized Mode[%d]!\n", mode);
+ break;
+ }
+
+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ writel(val, info->reg.gpmc_ecc_config);
}
/**
else
timeo += (HZ * 20) / 1000;
- gpmc_nand_write(info->gpmc_cs,
- GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF));
+ writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
while (time_before(jiffies, timeo)) {
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
if (status & NAND_STATUS_READY)
break;
cond_resched();
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+ val = readl(info->reg.gpmc_status);
+
if ((val & 0x100) == 0x100) {
- /* Clear IRQ Interrupt */
- val |= 0x100;
- val &= ~(0x0);
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val);
+ return 1;
} else {
- unsigned int cnt = 0;
- while (cnt++ < 0x1FF) {
- if ((val & 0x100) == 0x100)
- return 0;
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- }
+ return 0;
}
-
- return 1;
}
#ifdef CONFIG_MTD_NAND_OMAP_BCH
int i, offset;
dma_cap_mask_t mask;
unsigned sig;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
info->pdev = pdev;
info->gpmc_cs = pdata->cs;
- info->phys_base = pdata->phys_base;
+ info->reg = pdata->reg;
info->mtd.priv = &info->nand;
info->mtd.name = dev_name(&pdev->dev);
info->nand.options = pdata->devsize;
info->nand.options |= NAND_SKIP_BBTSCAN;
- /* NAND write protect off */
- gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
+ goto out_free_info;
+ }
+
+ info->phys_base = res->start;
+ info->mem_size = resource_size(res);
- if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+ if (!request_mem_region(info->phys_base, info->mem_size,
pdev->dev.driver->name)) {
err = -EBUSY;
goto out_free_info;
}
- info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
+ info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size);
if (!info->nand.IO_ADDR_R) {
err = -ENOMEM;
goto out_release_mem_region;
break;
case NAND_OMAP_PREFETCH_IRQ:
- err = request_irq(pdata->gpmc_irq,
- omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+ info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+ if (info->gpmc_irq_fifo <= 0) {
+ dev_err(&pdev->dev, "error getting fifo irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-fifo", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
- pdata->gpmc_irq, err);
+ info->gpmc_irq_fifo, err);
+ info->gpmc_irq_fifo = 0;
+ goto out_release_mem_region;
+ }
+
+ info->gpmc_irq_count = platform_get_irq(pdev, 1);
+ if (info->gpmc_irq_count <= 0) {
+ dev_err(&pdev->dev, "error getting count irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_count, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-count", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ info->gpmc_irq_count, err);
+ info->gpmc_irq_count = 0;
goto out_release_mem_region;
- } else {
- info->gpmc_irq = pdata->gpmc_irq;
- info->nand.read_buf = omap_read_buf_irq_pref;
- info->nand.write_buf = omap_write_buf_irq_pref;
}
+
+ info->nand.read_buf = omap_read_buf_irq_pref;
+ info->nand.write_buf = omap_write_buf_irq_pref;
+
break;
default:
out_release_mem_region:
if (info->dma)
dma_release_channel(info->dma);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
+ release_mem_region(info->phys_base, info->mem_size);
out_free_info:
kfree(info);
if (info->dma)
dma_release_channel(info->dma);
- if (info->gpmc_irq)
- free_irq(info->gpmc_irq, info);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <mach/dma.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#define NAND_STOP_DELAY (2 * HZ/50)
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
struct pxa3xx_nand_host *host;
- struct nand_chip *chip;
+ struct nand_chip *chip = NULL;
struct mtd_info *mtd;
struct resource *r;
int ret, irq, cs;
}
clk_enable(info->clk);
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no resource defined for data DMA\n");
- ret = -ENXIO;
- goto fail_put_clk;
- }
- info->drcmr_dat = r->start;
+ /*
+ * This is a dirty hack to make this driver work from devicetree
+ * bindings. It can be removed once we have a prober DMA controller
+ * framework for DT.
+ */
+ if (pdev->dev.of_node && cpu_is_pxa3xx()) {
+ info->drcmr_dat = 97;
+ info->drcmr_cmd = 99;
+ } else {
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no resource defined for data DMA\n");
+ ret = -ENXIO;
+ goto fail_put_clk;
+ }
+ info->drcmr_dat = r->start;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (r == NULL) {
- dev_err(&pdev->dev, "no resource defined for command DMA\n");
- ret = -ENXIO;
- goto fail_put_clk;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no resource defined for command DMA\n");
+ ret = -ENXIO;
+ goto fail_put_clk;
+ }
+ info->drcmr_cmd = r->start;
}
- info->drcmr_cmd = r->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id pxa3xx_nand_dt_ids[] = {
+ { .compatible = "marvell,pxa3xx-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+
+ if (!of_id)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
+ pdata->enable_arbiter = 1;
+ if (of_get_property(np, "marvell,nand-keep-config", NULL))
+ pdata->keep_config = 1;
+ of_property_read_u32(np, "num-cs", &pdata->num_cs);
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
static int pxa3xx_nand_probe(struct platform_device *pdev)
{
struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_part_parser_data ppdata = {};
struct pxa3xx_nand_info *info;
int ret, cs, probe_success;
+ ret = pxa3xx_nand_probe_dt(pdev);
+ if (ret)
+ return ret;
+
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
continue;
}
+ ppdata.of_node = pdev->dev.of_node;
ret = mtd_device_parse_register(info->host[cs]->mtd, NULL,
- NULL, pdata->parts[cs],
+ &ppdata, pdata->parts[cs],
pdata->nr_parts[cs]);
if (!ret)
probe_success = 1;
static struct platform_driver pxa3xx_nand_driver = {
.driver = {
.name = "pxa3xx-nand",
+ .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids),
},
.probe = pxa3xx_nand_probe,
.remove = pxa3xx_nand_remove,
#include <asm/io.h>
#include <plat/regs-nand.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-
-#include <plat/board.h>
+#include <plat/cpu.h>
#define DRIVER_NAME "omap2-onenand"
-#define ONENAND_IO_SIZE SZ_128K
#define ONENAND_BUFRAM_SIZE (1024 * 5)
struct omap2_onenand {
struct platform_device *pdev;
int gpmc_cs;
unsigned long phys_base;
+ unsigned int mem_size;
int gpio_irq;
struct mtd_info mtd;
struct onenand_chip onenand;
struct omap2_onenand *c;
struct onenand_chip *this;
int r;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
c->gpio_irq = 0;
}
- r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
- if (r < 0) {
- dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ r = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
goto err_kfree;
}
- if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+ c->phys_base = res->start;
+ c->mem_size = resource_size(res);
+
+ if (request_mem_region(c->phys_base, c->mem_size,
pdev->dev.driver->name) == NULL) {
- dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
- "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
+ dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
+ c->phys_base, c->mem_size);
r = -EBUSY;
- goto err_free_cs;
+ goto err_kfree;
}
- c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+ c->onenand.base = ioremap(c->phys_base, c->mem_size);
if (c->onenand.base == NULL) {
r = -ENOMEM;
goto err_release_mem_region;
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
-err_free_cs:
- gpmc_cs_free(c->gpmc_cs);
+ release_mem_region(c->phys_base, c->mem_size);
err_kfree:
kfree(c);
gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ release_mem_region(c->phys_base, c->mem_size);
gpmc_cs_free(c->gpmc_cs);
kfree(c);
#define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n))
#define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94)
#define INSTRUCTION_RESET 0xC0
+#define RTS_TXB0 0x01
+#define RTS_TXB1 0x02
+#define RTS_TXB2 0x04
+#define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07))
+
/* MPC251x registers */
#define CANSTAT 0x0e
static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
int tx_buf_idx)
{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
u32 sid, eid, exide, rtr;
u8 buf[SPI_TRANSFER_BUF_LEN];
buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
- mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+ /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+ priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+ mcp251x_spi_trans(priv->spi, 1);
}
static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
prod = txdata->tx_bd_prod;
cons = txdata->tx_bd_cons;
- /* NUM_TX_RINGS = number of "next-page" entries
- It will be used as a threshold */
- used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
+ used = SUB_S16(prod, cons);
#ifdef BNX2X_STOP_ON_ERROR
WARN_ON(used < 0);
- WARN_ON(used > bp->tx_ring_size);
- WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL);
+ WARN_ON(used > txdata->tx_ring_size);
+ WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL);
#endif
- return (s16)(bp->tx_ring_size) - used;
+ return (s16)(txdata->tx_ring_size) - used;
}
static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata)
txdata->txq_index = txq_index;
txdata->tx_cons_sb = tx_cons_sb;
txdata->parent_fp = fp;
+ txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size;
DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n",
txdata->cid, txdata->txq_index);
{ 0x70000, 8, RI_ALL_ONLINE },
{ 0x70020, 8184, RI_ALL_OFFLINE },
{ 0x78000, 8192, RI_E3E3B0_OFFLINE },
- { 0x85000, 3, RI_ALL_ONLINE },
- { 0x8501c, 7, RI_ALL_ONLINE },
- { 0x85048, 1, RI_ALL_ONLINE },
- { 0x85200, 32, RI_ALL_ONLINE },
- { 0xb0000, 16384, RI_E1H_ONLINE },
+ { 0x85000, 3, RI_ALL_OFFLINE },
+ { 0x8501c, 7, RI_ALL_OFFLINE },
+ { 0x85048, 1, RI_ALL_OFFLINE },
+ { 0x85200, 32, RI_ALL_OFFLINE },
+ { 0xb0000, 16384, RI_E1H_OFFLINE },
{ 0xc1000, 7, RI_ALL_ONLINE },
{ 0xc103c, 2, RI_E2E3E3B0_ONLINE },
{ 0xc1800, 2, RI_ALL_ONLINE },
{ 0x140188, 3, RI_E1E1HE2E3_ONLINE },
{ 0x140194, 13, RI_ALL_ONLINE },
{ 0x140200, 6, RI_E1E1HE2E3_ONLINE },
- { 0x140220, 4, RI_E2E3_ONLINE },
- { 0x140240, 4, RI_E2E3_ONLINE },
{ 0x140260, 4, RI_E2E3_ONLINE },
{ 0x140280, 4, RI_E2E3_ONLINE },
- { 0x1402a0, 4, RI_E2E3_ONLINE },
- { 0x1402c0, 4, RI_E2E3_ONLINE },
{ 0x1402e0, 2, RI_E2E3_ONLINE },
{ 0x1402e8, 2, RI_E2E3E3B0_ONLINE },
{ 0x1402f0, 9, RI_E2E3_ONLINE },
{ 0x140314, 44, RI_E3B0_ONLINE },
- { 0x1403d0, 70, RI_E3B0_ONLINE },
{ 0x144000, 4, RI_E1E1H_ONLINE },
{ 0x148000, 4, RI_E1E1H_ONLINE },
{ 0x14c000, 4, RI_E1E1H_ONLINE },
{ 0x180398, 1, RI_E2E3E3B0_ONLINE },
{ 0x1803a0, 5, RI_E2E3E3B0_ONLINE },
{ 0x1803b4, 2, RI_E3E3B0_ONLINE },
- { 0x180400, 1, RI_ALL_ONLINE },
{ 0x180404, 255, RI_E1E1H_OFFLINE },
{ 0x181000, 4, RI_ALL_ONLINE },
{ 0x181010, 1020, RI_ALL_OFFLINE },
{ 0x1b905c, 1, RI_E3E3B0_ONLINE },
{ 0x1b9064, 1, RI_E3B0_ONLINE },
{ 0x1b9080, 10, RI_E3B0_ONLINE },
- { 0x1b9400, 14, RI_E2E3E3B0_ONLINE },
- { 0x1b943c, 19, RI_E2E3E3B0_ONLINE },
- { 0x1b9490, 10, RI_E2E3E3B0_ONLINE },
+ { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE },
+ { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE },
+ { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE },
{ 0x1c0000, 2, RI_ALL_ONLINE },
{ 0x200000, 65, RI_ALL_ONLINE },
{ 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE },
{ 0x200398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x200400, 1, RI_ALL_ONLINE },
{ 0x200404, 255, RI_E1E1H_OFFLINE },
{ 0x202000, 4, RI_ALL_ONLINE },
{ 0x202010, 2044, RI_ALL_OFFLINE },
{ 0x280398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x280400, 1, RI_ALL_ONLINE },
{ 0x280404, 255, RI_E1E1H_OFFLINE },
{ 0x282000, 4, RI_ALL_ONLINE },
{ 0x282010, 2044, RI_ALL_OFFLINE },
{ 0x300398, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x300400, 1, RI_ALL_ONLINE },
{ 0x300404, 255, RI_E1E1H_OFFLINE },
{ 0x302000, 4, RI_ALL_ONLINE },
{ 0x302010, 2044, RI_ALL_OFFLINE },
struct bnx2x *bp = netdev_priv(dev);
struct dump_hdr dump_hdr = {0};
- regs->version = 0;
+ regs->version = 1;
memset(p, 0, regs->len);
if (!netif_running(bp->dev))
bp->link_params.req_flow_ctrl[cfg_idx] =
BNX2X_FLOW_CTRL_AUTO;
}
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE;
+ if (epause->rx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX;
+
+ if (epause->tx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX;
}
DP(BNX2X_MSG_ETHTOOL,
return bnx2x_status;
DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");
- if (CHIP_IS_E3(bp))
- bnx2x_update_pfc_xmac(params, vars, 0);
- else {
+
+ if (CHIP_IS_E3(bp)) {
+ if (vars->mac_type == MAC_TYPE_XMAC)
+ bnx2x_update_pfc_xmac(params, vars, 0);
+ } else {
val = REG_RD(bp, MISC_REG_RESET_REG_2);
if ((val &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
switch (speed_mask) {
case GP_STATUS_10M:
vars->line_speed = SPEED_10;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_10TFD;
else
vars->link_status |= LINK_10THD;
case GP_STATUS_100M:
vars->line_speed = SPEED_100;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_100TXFD;
else
vars->link_status |= LINK_100TXHD;
case GP_STATUS_1G:
case GP_STATUS_1G_KX:
vars->line_speed = SPEED_1000;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_1000TFD;
else
vars->link_status |= LINK_1000THD;
case GP_STATUS_2_5G:
vars->line_speed = SPEED_2500;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_2500TFD;
else
vars->link_status |= LINK_2500THD;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
if (SINGLE_MEDIA_DIRECT(params)) {
+ vars->duplex = duplex;
bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status);
if (phy->req_line_speed == SPEED_AUTO_NEG)
bnx2x_xgxs_an_resolve(phy, params, vars,
LINK_STATUS_PARALLEL_DETECTION_USED;
}
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ vars->duplex = duplex;
}
}
}
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
- if (rc < 0)
+
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+ } else if (rc < 0)
BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
+
return rc;
}
dev_info.port_hw_config[port].
fcoe_wwn_node_name_lower);
} else if (!IS_MF_SD(bp)) {
- u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
-
/*
* Read the WWN info only if the FCoE feature is enabled for
* this function.
*/
- if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+ if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
bnx2x_get_ext_wwn_info(bp, func);
} else if (IS_MF_FCOE_SD(bp))
netdev_for_each_uc_addr(ha, dev) {
rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
BNX2X_UC_LIST_MAC, &ramrod_flags);
- if (rc < 0) {
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP,
+ "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+
+ } else if (rc < 0) {
+
BNX2X_ERR("Failed to schedule ADD operations: %d\n",
rc);
return rc;
if (CHIP_REV_IS_SLOW(bp))
return;
+ /* Update MCP's statistics if possible */
+ if (bp->func_stx)
+ memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
+ sizeof(bp->func_stats));
+
/* loader */
if (bp->executer_idx) {
int loader_idx = PMF_DMAE_C(bp);
} else if (bp->func_stx) {
*stats_comp = 0;
- memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
- sizeof(bp->func_stats));
bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
}
}
if (bp->port.pmf)
bnx2x_hw_stats_update(bp);
- if (bnx2x_storm_stats_update(bp) && (bp->stats_pending++ == 3)) {
- BNX2X_ERR("storm stats were not updated for 3 times\n");
- bnx2x_panic();
+ if (bnx2x_storm_stats_update(bp)) {
+ if (bp->stats_pending++ == 3) {
+ BNX2X_ERR("storm stats were not updated for 3 times\n");
+ bnx2x_panic();
+ }
return;
}
/* Only one can be built-in;-> */
static struct net_device *znet_dev;
+#define NETIDBLK_MAGIC "NETIDBLK"
+#define NETIDBLK_MAGIC_SIZE 8
+
struct netidblk {
- char magic[8]; /* The magic number (string) "NETIDBLK" */
+ char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */
unsigned char netid[8]; /* The physical station address */
char nettype, globalopt;
char vendor[8]; /* The machine vendor and product name. */
struct znet_private *znet;
struct net_device *dev;
char *p;
+ char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE);
int err = -ENOMEM;
/* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */
- for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++)
- if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0)
+ for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++)
+ if (*p == 'N' &&
+ strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0)
break;
- if (p >= (char *)phys_to_virt(0x100000)) {
+ if (p > plast) {
if (znet_debug > 1)
printk(KERN_INFO "No Z-Note ethernet adaptor found.\n");
return -ENODEV;
}
if (adapter->rx_queue.queue_addr != NULL) {
- if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
- dma_unmap_single(dev,
- adapter->rx_queue.queue_dma,
- adapter->rx_queue.queue_len,
- DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- }
- kfree(adapter->rx_queue.queue_addr);
+ dma_free_coherent(dev, adapter->rx_queue.queue_len,
+ adapter->rx_queue.queue_addr,
+ adapter->rx_queue.queue_dma);
adapter->rx_queue.queue_addr = NULL;
}
goto err_out;
}
+ dev = &adapter->vdev->dev;
+
adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) *
rxq_entries;
- adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len,
- GFP_KERNEL);
+ adapter->rx_queue.queue_addr =
+ dma_alloc_coherent(dev, adapter->rx_queue.queue_len,
+ &adapter->rx_queue.queue_dma, GFP_KERNEL);
if (!adapter->rx_queue.queue_addr) {
netdev_err(netdev, "unable to allocate rx queue pages\n");
goto err_out;
}
- dev = &adapter->vdev->dev;
-
adapter->buffer_list_dma = dma_map_single(dev,
adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
adapter->filter_list_dma = dma_map_single(dev,
adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = dma_map_single(dev,
- adapter->rx_queue.queue_addr,
- adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
- (dma_mapping_error(dev, adapter->filter_list_dma)) ||
- (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
+ (dma_mapping_error(dev, adapter->filter_list_dma))) {
netdev_err(netdev, "unable to map filter or buffer list "
"pages\n");
rc = -ENOMEM;
mlx4_info(dev, "non-primary physical function, skipping.\n");
else
mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_load_fw(dev);
if (err) {
mlx4_err(dev, "Failed to start FW, aborting.\n");
- goto unmap_bf;
+ return err;
}
mlx4_cfg.log_pg_sz_m = 1;
err = mlx4_init_slave(dev);
if (err) {
mlx4_err(dev, "Failed to initialize slave\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_slave_cap(dev);
err = mlx4_QUERY_ADAPTER(dev, &adapter);
if (err) {
mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n");
- goto err_close;
+ goto unmap_bf;
}
priv->eq_table.inta_pin = adapter.inta_pin;
return 0;
+unmap_bf:
+ unmap_bf_area(dev);
+
err_close:
mlx4_close_hca(dev);
mlx4_UNMAP_FA(dev);
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
}
-unmap_bf:
- unmap_bf_area(dev);
return err;
}
}
slave_start:
- if (mlx4_cmd_init(dev)) {
+ err = mlx4_cmd_init(dev);
+ if (err) {
mlx4_err(dev, "Failed to init command interface, aborting.\n");
goto err_sriov;
}
return err;
}
-static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 pf_num,
+static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 port,
enum mlx4_steer_type steer,
u32 qpn)
{
- struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[pf_num];
+ struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[port - 1];
struct mlx4_promisc_qp *pqp;
list_for_each_entry(pqp, &s_steer->promisc_qps[steer], list) {
/* If the given qpn is also a promisc qp,
* it should be inserted to duplicates list
*/
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (pqp) {
dqp = kmalloc(sizeof *dqp, GFP_KERNEL);
if (!dqp) {
s_steer = &mlx4_priv(dev)->steer[port - 1];
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (!pqp)
return 0; /* nothing to do */
s_steer = &mlx4_priv(dev)->steer[port - 1];
/* if qp is not promisc, it cannot be duplicated */
- if (!get_promisc_qp(dev, 0, steer, qpn))
+ if (!get_promisc_qp(dev, port, steer, qpn))
return false;
/* The qp is promisc qp so it is a duplicate on this index
members_count = be32_to_cpu(mgm->members_count) & 0xffffff;
for (i = 0; i < members_count; i++) {
qpn = be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK;
- if (!get_promisc_qp(dev, 0, steer, qpn) && qpn != tqpn) {
+ if (!get_promisc_qp(dev, port, steer, qpn) && qpn != tqpn) {
/* the qp is not promisc, the entry can't be removed */
goto out;
}
mutex_lock(&priv->mcg_table.mutex);
- if (get_promisc_qp(dev, 0, steer, qpn)) {
+ if (get_promisc_qp(dev, port, steer, qpn)) {
err = 0; /* Noting to do, already exists */
goto out_mutex;
}
s_steer = &mlx4_priv(dev)->steer[port - 1];
mutex_lock(&priv->mcg_table.mutex);
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (unlikely(!pqp)) {
mlx4_warn(dev, "QP %x is not promiscuous QP\n", qpn);
/* nothing to do */
return err;
}
-struct mlx4_net_trans_rule_hw_ctrl {
- __be32 ctrl;
- __be32 vf_vep_port;
- __be32 qpn;
- __be32 reserved;
-};
-
static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl,
struct mlx4_net_trans_rule_hw_ctrl *hw)
{
hw->qpn = cpu_to_be32(ctrl->qpn);
}
-struct mlx4_net_trans_rule_hw_ib {
- u8 size;
- u8 rsvd1;
- __be16 id;
- u32 rsvd2;
- __be32 qpn;
- __be32 qpn_mask;
- u8 dst_gid[16];
- u8 dst_gid_msk[16];
-} __packed;
-
-struct mlx4_net_trans_rule_hw_eth {
- u8 size;
- u8 rsvd;
- __be16 id;
- u8 rsvd1[6];
- u8 dst_mac[6];
- u16 rsvd2;
- u8 dst_mac_msk[6];
- u16 rsvd3;
- u8 src_mac[6];
- u16 rsvd4;
- u8 src_mac_msk[6];
- u8 rsvd5;
- u8 ether_type_enable;
- __be16 ether_type;
- __be16 vlan_id_msk;
- __be16 vlan_id;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_tcp_udp {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be16 rsvd1[3];
- __be16 dst_port;
- __be16 rsvd2;
- __be16 dst_port_msk;
- __be16 rsvd3;
- __be16 src_port;
- __be16 rsvd4;
- __be16 src_port_msk;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_ipv4 {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be32 rsvd1;
- __be32 dst_ip;
- __be32 dst_ip_msk;
- __be32 src_ip;
- __be32 src_ip_msk;
-} __packed;
-
-struct _rule_hw {
- union {
- struct {
- u8 size;
- u8 rsvd;
- __be16 id;
- };
- struct mlx4_net_trans_rule_hw_eth eth;
- struct mlx4_net_trans_rule_hw_ib ib;
- struct mlx4_net_trans_rule_hw_ipv4 ipv4;
- struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
- };
+const u16 __sw_id_hw[] = {
+ [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
+ [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
+ [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
+ [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
+ [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
+ [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
};
static int parse_trans_rule(struct mlx4_dev *dev, struct mlx4_spec_list *spec,
struct _rule_hw *rule_hw)
{
- static const u16 __sw_id_hw[] = {
- [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
- [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
- [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
- [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
- [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
- [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
- };
-
static const size_t __rule_hw_sz[] = {
[MLX4_NET_TRANS_RULE_ID_ETH] =
sizeof(struct mlx4_net_trans_rule_hw_eth),
struct list_head steer_entries[MLX4_NUM_STEERS];
};
+struct mlx4_net_trans_rule_hw_ctrl {
+ __be32 ctrl;
+ __be32 vf_vep_port;
+ __be32 qpn;
+ __be32 reserved;
+};
+
+struct mlx4_net_trans_rule_hw_ib {
+ u8 size;
+ u8 rsvd1;
+ __be16 id;
+ u32 rsvd2;
+ __be32 qpn;
+ __be32 qpn_mask;
+ u8 dst_gid[16];
+ u8 dst_gid_msk[16];
+} __packed;
+
+struct mlx4_net_trans_rule_hw_eth {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ u8 rsvd1[6];
+ u8 dst_mac[6];
+ u16 rsvd2;
+ u8 dst_mac_msk[6];
+ u16 rsvd3;
+ u8 src_mac[6];
+ u16 rsvd4;
+ u8 src_mac_msk[6];
+ u8 rsvd5;
+ u8 ether_type_enable;
+ __be16 ether_type;
+ __be16 vlan_id_msk;
+ __be16 vlan_id;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_tcp_udp {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be16 rsvd1[3];
+ __be16 dst_port;
+ __be16 rsvd2;
+ __be16 dst_port_msk;
+ __be16 rsvd3;
+ __be16 src_port;
+ __be16 rsvd4;
+ __be16 src_port_msk;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_ipv4 {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be32 rsvd1;
+ __be32 dst_ip;
+ __be32 dst_ip_msk;
+ __be32 src_ip;
+ __be32 src_ip_msk;
+} __packed;
+
+struct _rule_hw {
+ union {
+ struct {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ };
+ struct mlx4_net_trans_rule_hw_eth eth;
+ struct mlx4_net_trans_rule_hw_ib ib;
+ struct mlx4_net_trans_rule_hw_ipv4 ipv4;
+ struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
+ };
+};
+
struct mlx4_priv {
struct mlx4_dev dev;
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
#include "mlx4.h"
#include "fw.h"
return err;
}
+/*
+ * MAC validation for Flow Steering rules.
+ * VF can attach rules only with a mac address which is assigned to it.
+ */
+static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header,
+ struct list_head *rlist)
+{
+ struct mac_res *res, *tmp;
+ __be64 be_mac;
+
+ /* make sure it isn't multicast or broadcast mac*/
+ if (!is_multicast_ether_addr(eth_header->eth.dst_mac) &&
+ !is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ if (!memcmp(&be_mac, eth_header->eth.dst_mac, ETH_ALEN))
+ return 0;
+ }
+ pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n",
+ eth_header->eth.dst_mac, slave);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * In case of missing eth header, append eth header with a MAC address
+ * assigned to the VF.
+ */
+static int add_eth_header(struct mlx4_dev *dev, int slave,
+ struct mlx4_cmd_mailbox *inbox,
+ struct list_head *rlist, int header_id)
+{
+ struct mac_res *res, *tmp;
+ u8 port;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct mlx4_net_trans_rule_hw_eth *eth_header;
+ struct mlx4_net_trans_rule_hw_ipv4 *ip_header;
+ struct mlx4_net_trans_rule_hw_tcp_udp *l4_header;
+ __be64 be_mac = 0;
+ __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16);
+
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ port = be32_to_cpu(ctrl->vf_vep_port) & 0xff;
+ eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1);
+
+ /* Clear a space in the inbox for eth header */
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ ip_header =
+ (struct mlx4_net_trans_rule_hw_ipv4 *)(eth_header + 1);
+ memmove(ip_header, eth_header,
+ sizeof(*ip_header) + sizeof(*l4_header));
+ break;
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ l4_header = (struct mlx4_net_trans_rule_hw_tcp_udp *)
+ (eth_header + 1);
+ memmove(l4_header, eth_header, sizeof(*l4_header));
+ break;
+ default:
+ return -EINVAL;
+ }
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ if (port == res->port) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ break;
+ }
+ }
+ if (!be_mac) {
+ pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d .\n",
+ port);
+ return -EINVAL;
+ }
+
+ memset(eth_header, 0, sizeof(*eth_header));
+ eth_header->size = sizeof(*eth_header) >> 2;
+ eth_header->id = cpu_to_be16(__sw_id_hw[MLX4_NET_TRANS_RULE_ID_ETH]);
+ memcpy(eth_header->dst_mac, &be_mac, ETH_ALEN);
+ memcpy(eth_header->dst_mac_msk, &mac_msk, ETH_ALEN);
+
+ return 0;
+
+}
+
int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
+
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker;
+ struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct _rule_hw *rule_header;
+ int header_id;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ rule_header = (struct _rule_hw *)(ctrl + 1);
+ header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id));
+
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_ETH:
+ if (validate_eth_header_mac(slave, rule_header, rlist))
+ return -EINVAL;
+ break;
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ pr_warn("Can't attach FS rule without L2 headers, adding L2 header.\n");
+ if (add_eth_header(dev, slave, inbox, rlist, header_id))
+ return -EINVAL;
+ vhcr->in_modifier +=
+ sizeof(struct mlx4_net_trans_rule_hw_eth) >> 2;
+ break;
+ default:
+ pr_err("Corrupted mailbox.\n");
+ return -EINVAL;
+ }
+
err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param,
vhcr->in_modifier, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
#include <mach/netx-regs.h>
#include <mach/pfifo.h>
#include <mach/xc.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
/* XC Fifo Offsets */
#define EMPTY_PTR_FIFO(xcno) (0 + ((xcno) << 3)) /* Index of the empty pointer FIFO */
* The SEEQ8005 doesn't like us writing to its registers
* too quickly.
*/
-static inline void ether3_outb(int v, const void __iomem *r)
+static inline void ether3_outb(int v, void __iomem *r)
{
writeb(v, r);
udelay(1);
}
-static inline void ether3_outw(int v, const void __iomem *r)
+static inline void ether3_outw(int v, void __iomem *r)
{
writew(v, r);
udelay(1);
sp->srings = sr;
sp->rx_desc = sp->srings->rxvector;
sp->tx_desc = sp->srings->txvector;
+ spin_lock_init(&sp->tx_lock);
/* A couple calculations now, saves many cycles later. */
setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS);
{
#define COSMISC_CONSTANT 6
- struct uart_port port = {
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
-
- .membase = (unsigned char __iomem *) uart,
- .mapbase = (unsigned long) uart,
+ struct uart_8250_port port = {
+ .port = {
+ .irq = 0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
+
+ .membase = (unsigned char __iomem *) uart,
+ .mapbase = (unsigned long) uart,
+ }
};
unsigned char lcr;
uart->iu_scr = COSMISC_CONSTANT,
uart->iu_lcr = lcr;
uart->iu_lcr;
- serial8250_register_port(&port);
+ serial8250_register_8250_port(&port);
}
static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
tty = priv->tty;
mutex_lock(&tty->termios_mutex);
- old_termios = *(tty->termios);
- cflag = tty->termios->c_cflag;
+ old_termios = tty->termios;
+ cflag = tty->termios.c_cflag;
tty_encode_baud_rate(tty, speed, speed);
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
int cflag;
mutex_lock(&tty->termios_mutex);
- old_termios = *(tty->termios);
- cflag = tty->termios->c_cflag;
+ old_termios = tty->termios;
+ cflag = tty->termios.c_cflag;
if (stop)
cflag &= ~CREAD;
else
cflag |= CREAD;
- tty->termios->c_cflag = cflag;
+ tty->termios.c_cflag = cflag;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
mutex_unlock(&tty->termios_mutex);
#include <net/irda/irda_device.h>
#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/regs-uart.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/regs-ost.h>
+#include <mach/regs-uart.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
int txdma;
int rxdma;
+ int uart_irq;
+ int icp_irq;
+
struct irlap_cb *irlap;
struct qos_info qos;
si->speed = 9600;
- err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+ err = request_irq(si->uart_irq, pxa_irda_sir_irq, 0, dev->name, dev);
if (err)
goto err_irq1;
- err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+ err = request_irq(si->icp_irq, pxa_irda_fir_irq, 0, dev->name, dev);
if (err)
goto err_irq2;
/*
* The interrupt must remain disabled for now.
*/
- disable_irq(IRQ_STUART);
- disable_irq(IRQ_ICP);
+ disable_irq(si->uart_irq);
+ disable_irq(si->icp_irq);
err = -EBUSY;
si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
/*
* Now enable the interrupt and start the queue
*/
- enable_irq(IRQ_STUART);
- enable_irq(IRQ_ICP);
+ enable_irq(si->uart_irq);
+ enable_irq(si->icp_irq);
netif_start_queue(dev);
printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
err_tx_dma:
pxa_free_dma(si->rxdma);
err_rx_dma:
- free_irq(IRQ_ICP, dev);
+ free_irq(si->icp_irq, dev);
err_irq2:
- free_irq(IRQ_STUART, dev);
+ free_irq(si->uart_irq, dev);
err_irq1:
return err;
si->irlap = NULL;
}
- free_irq(IRQ_STUART, dev);
- free_irq(IRQ_ICP, dev);
+ free_irq(si->uart_irq, dev);
+ free_irq(si->icp_irq, dev);
pxa_free_dma(si->rxdma);
pxa_free_dma(si->txdma);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
+ si->uart_irq = platform_get_irq(pdev, 0);
+ si->icp_irq = platform_get_irq(pdev, 1);
+
si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
struct ktermios *old)
{
struct hso_serial *serial = tty->driver_data;
- struct ktermios *termios;
if (!serial) {
printk(KERN_ERR "%s: no tty structures", __func__);
/*
* Fix up unsupported bits
*/
- termios = tty->termios;
- termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+ tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
- termios->c_cflag &=
+ tty->termios.c_cflag &=
~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD /* clear current baud rate */
| CBAUDEX); /* clear current buad rate */
- termios->c_cflag |= CS8; /* character size 8 bits */
+ tty->termios.c_cflag |= CS8; /* character size 8 bits */
/* baud rate 115200 */
tty_encode_baud_rate(tty, 115200, 115200);
if (old)
D5("Termios called with: cflags new[%d] - old[%d]",
- tty->termios->c_cflag, old->c_cflag);
+ tty->termios.c_cflag, old->c_cflag);
/* the actual setup */
spin_lock_irqsave(&serial->serial_lock, flags);
if (serial->port.count)
_hso_serial_set_termios(tty, old);
else
- tty->termios = old;
+ tty->termios = *old;
spin_unlock_irqrestore(&serial->serial_lock, flags);
/* done */
if (minor < 0)
goto exit;
+ tty_port_init(&serial->port);
+
/* register our minor number */
- serial->parent->dev = tty_register_device(tty_drv, minor,
- &serial->parent->interface->dev);
+ serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
+ minor, &serial->parent->interface->dev);
dev = serial->parent->dev;
dev_set_drvdata(dev, serial->parent);
i = device_create_file(dev, &dev_attr_hsotype);
serial->minor = minor;
serial->magic = HSO_SERIAL_MAGIC;
spin_lock_init(&serial->serial_lock);
- tty_port_init(&serial->port);
serial->num_rx_urbs = num_urbs;
/* RX, allocate urb and initialize */
if (ret < 0)
goto err;
- if (info->subdriver && info->subdriver->suspend)
+ if (intf == info->control && info->subdriver && info->subdriver->suspend)
ret = info->subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
struct usbnet *dev = usb_get_intfdata(intf);
struct qmi_wwan_state *info = (void *)&dev->data;
int ret = 0;
+ bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume);
- if (info->subdriver && info->subdriver->resume)
+ if (callsub)
ret = info->subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
- if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend)
+ if (ret < 0 && callsub && info->subdriver->suspend)
info->subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
{QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
return -EIO;
}
- *datap = *attrdata;
+ *datap = le16_to_cpu(*attrdata);
kfree(attrdata);
return result;
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
-static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
{
struct urb *urb;
int i;
+ int ret = 0;
/* don't refill the queue all at once */
for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
urb = usb_alloc_urb(0, flags);
if (urb != NULL) {
- if (rx_submit(dev, urb, flags) == -ENOLINK)
- return;
+ ret = rx_submit(dev, urb, flags);
+ if (ret)
+ goto err;
+ } else {
+ ret = -ENOMEM;
+ goto err;
}
}
+err:
+ return ret;
}
/*-------------------------------------------------------------------------*/
int temp = dev->rxq.qlen;
if (temp < RX_QLEN(dev)) {
- rx_alloc_submit(dev, GFP_ATOMIC);
+ if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
+ return;
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
};
int training_power;
int i, val;
+ u32 am2pm_mask = ah->paprd_ratemask;
if (IS_CHAN_2GHZ(ah->curchan))
training_power = ar9003_get_training_power_2g(ah);
}
ah->paprd_training_power = training_power;
+ if (AR_SREV_9330(ah))
+ am2pm_mask = 0;
+
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK,
ah->paprd_ratemask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK,
- ah->paprd_ratemask);
+ am2pm_mask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK,
ah->paprd_ratemask_ht40);
}
EXPORT_SYMBOL(ar9003_paprd_setup_gain_table);
+static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah,
+ struct ath9k_hw_cal_data *caldata,
+ int chain)
+{
+ u32 *pa_in = caldata->pa_table[chain];
+ int capdiv_offset, quick_drop_offset;
+ int capdiv2g, quick_drop;
+ int count = 0;
+ int i;
+
+ if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah))
+ return false;
+
+ capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G);
+
+ quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP);
+
+ if (quick_drop)
+ quick_drop -= 0x40;
+
+ for (i = 0; i < NUM_BIN + 1; i++) {
+ if (pa_in[i] == 1400)
+ count++;
+ }
+
+ if (AR_SREV_9485(ah)) {
+ if (pa_in[23] < 800) {
+ capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150);
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 7) {
+ capdiv2g = 7;
+ if (pa_in[23] < 600) {
+ quick_drop++;
+ if (quick_drop > 0)
+ quick_drop = 0;
+ }
+ }
+ } else if (pa_in[23] == 1400) {
+ quick_drop_offset = min_t(int, count / 3, 2);
+ quick_drop += quick_drop_offset;
+ capdiv2g += quick_drop_offset / 2;
+
+ if (capdiv2g > 7)
+ capdiv2g = 7;
+
+ if (quick_drop > 0) {
+ quick_drop = 0;
+ capdiv2g -= quick_drop_offset;
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ }
+ } else {
+ return false;
+ }
+ } else if (AR_SREV_9330(ah)) {
+ if (pa_in[23] < 1000) {
+ capdiv_offset = (1000 - pa_in[23]) / 100;
+ capdiv2g += capdiv_offset;
+ if (capdiv_offset > 3) {
+ capdiv_offset = 1;
+ quick_drop--;
+ }
+
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 6)
+ capdiv2g = 6;
+ if (quick_drop < -4)
+ quick_drop = -4;
+ } else if (pa_in[23] == 1400) {
+ if (count > 3) {
+ quick_drop++;
+ capdiv2g -= count / 4;
+ if (quick_drop > -2)
+ quick_drop = -2;
+ } else {
+ capdiv2g--;
+ }
+
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ } else {
+ return false;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g);
+ REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+ quick_drop);
+
+ return true;
+}
+
int ar9003_paprd_create_curve(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata, int chain)
{
if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain))
status = -2;
+ if (ar9003_paprd_retrain_pa_in(ah, caldata, chain))
+ status = -EINPROGRESS;
+
REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1,
AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
#define AR_PHY_AIC_CTRL_4_B0 (AR_SM_BASE + 0x4c0)
#define AR_PHY_AIC_STAT_2_B0 (AR_SM_BASE + 0x4cc)
+#define AR_PHY_65NM_CH0_TXRF3 0x16048
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G 0x0000001e
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S 1
+
#define AR_PHY_65NM_CH0_SYNTH4 0x1608c
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002)
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1)
{
struct ath_btcoex *btcoex = &sc->btcoex;
- ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+ if (btcoex->hw_timer_enabled)
+ ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
}
u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
ah->config.spurchans[i][1] = AR_NO_SPUR;
}
- /* PAPRD needs some more work to be enabled */
- ah->config.paprd_disable = 1;
-
ah->config.rx_intr_mitigation = true;
ah->config.pcieSerDesWrite = true;
else
imr_reg |= AR_IMR_TXOK;
- if (opmode == NL80211_IFTYPE_AP)
- imr_reg |= AR_IMR_MIB;
-
ENABLE_REGWRITE_BUFFER(ah);
REG_WRITE(ah, AR_IMR, imr_reg);
/* Operating channel changed, reset channel calibration data */
memset(caldata, 0, sizeof(*caldata));
ath9k_init_nfcal_hist_buffer(ah, chan);
+ } else if (caldata) {
+ caldata->paprd_packet_sent = false;
}
ah->noise = ath9k_hw_getchan_noise(ah, chan);
pCap->tx_desc_len = sizeof(struct ar9003_txc);
pCap->txs_len = sizeof(struct ar9003_txs);
if (!ah->config.paprd_disable &&
- ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
+ ah->eep_ops->get_eeprom(ah, EEP_PAPRD) &&
+ !AR_SREV_9462(ah))
pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
} else {
pCap->tx_desc_len = sizeof(struct ath_desc);
int8_t iCoff;
int8_t qCoff;
bool rtt_done;
+ bool paprd_packet_sent;
bool paprd_done;
bool nfcal_pending;
bool nfcal_interference;
int chain_ok = 0;
int chain;
int len = 1800;
+ int ret;
- if (!caldata)
+ if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done)
return;
ath9k_ps_wakeup(sc);
continue;
chain_ok = 0;
-
- ath_dbg(common, CALIBRATE,
- "Sending PAPRD frame for thermal measurement on chain %d\n",
- chain);
- if (!ath_paprd_send_frame(sc, skb, chain))
- goto fail_paprd;
-
ar9003_paprd_setup_gain_table(ah, chain);
ath_dbg(common, CALIBRATE,
break;
}
- if (ar9003_paprd_create_curve(ah, caldata, chain)) {
+ ret = ar9003_paprd_create_curve(ah, caldata, chain);
+ if (ret == -EINPROGRESS) {
+ ath_dbg(common, CALIBRATE,
+ "PAPRD curve on chain %d needs to be re-trained\n",
+ chain);
+ break;
+ } else if (ret) {
ath_dbg(common, CALIBRATE,
"PAPRD create curve failed on chain %d\n",
chain);
ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
+ if (sc->sc_ah->caldata)
+ sc->sc_ah->caldata->paprd_packet_sent = true;
+
if (!(tx_flags & ATH_TX_ERROR))
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
else
devinfo->bus_pub.bus->dstats.tx_errors++;
- dev_kfree_skb(req->skb);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
devinfo->bus_pub.bus->dstats.rx_packets++;
} else {
devinfo->bus_pub.bus->dstats.rx_errors++;
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
return;
}
if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
brcmf_dbg(ERROR, "rx protocol error\n");
brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
devinfo->bus_pub.bus->dstats.rx_errors++;
} else {
brcmf_rx_packet(devinfo->dev, ifidx, skb);
brcmf_usb_rx_refill(devinfo, req);
}
} else {
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
return;
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
req);
- req->urb->transfer_flags |= URB_ZERO_PACKET;
req->devinfo = devinfo;
+ brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (ret == 0) {
- brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
- } else {
- dev_kfree_skb(req->skb);
+ if (ret) {
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq);
if (!req) {
+ brcmu_pkt_buf_free_skb(skb);
brcmf_dbg(ERROR, "no req to send\n");
return -ENOMEM;
}
- if (!req->urb) {
- brcmf_dbg(ERROR, "no urb for req %p\n", req);
- return -ENOBUFS;
- }
req->skb = skb;
req->devinfo = devinfo;
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
skb->data, skb->len, brcmf_usb_tx_complete, req);
req->urb->transfer_flags |= URB_ZERO_PACKET;
+ brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (!ret) {
- brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
- } else {
+ if (ret) {
+ brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n");
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
}
}
if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) {
- scb_val.val = cpu_to_le32(0);
+ memset(&scb_val, 0, sizeof(scb_val));
err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val,
sizeof(struct brcmf_scb_val_le));
- if (err)
+ if (err) {
WL_ERR("Could not get rssi (%d)\n", err);
-
- rssi = le32_to_cpu(scb_val.val);
- sinfo->filled |= STATION_INFO_SIGNAL;
- sinfo->signal = rssi;
- WL_CONN("RSSI %d dBm\n", rssi);
+ } else {
+ rssi = le32_to_cpu(scb_val.val);
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = rssi;
+ WL_CONN("RSSI %d dBm\n", rssi);
+ }
}
done:
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
+ /* If we're powered off anyway, just let the mmc layer remove the
+ * card. */
+ if (!lbs_iface_active(card->priv))
+ return -ENOSYS;
+
dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
sdio_func_id(func), flags);
cmd_code = le16_to_cpu(host_cmd->command);
cmd_size = le16_to_cpu(host_cmd->size);
- skb_trim(cmd_node->cmd_skb, cmd_size);
+ /* Adjust skb length */
+ if (cmd_node->cmd_skb->len > cmd_size)
+ /*
+ * cmd_size is less than sizeof(struct host_cmd_ds_command).
+ * Trim off the unused portion.
+ */
+ skb_trim(cmd_node->cmd_skb, cmd_size);
+ else if (cmd_node->cmd_skb->len < cmd_size)
+ /*
+ * cmd_size is larger than sizeof(struct host_cmd_ds_command)
+ * because we have appended custom IE TLV. Increase skb length
+ * accordingly.
+ */
+ skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len);
do_gettimeofday(&tstamp);
dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_BIT8, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
/*
* Initialize hw specifications.
*/
#define GPIOCSR_BIT5 FIELD32(0x00000020)
#define GPIOCSR_BIT6 FIELD32(0x00000040)
#define GPIOCSR_BIT7 FIELD32(0x00000080)
+#define GPIOCSR_BIT8 FIELD32(0x00000100)
/*
* BBPPCSR: BBP Pin control register.
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_DIR0, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
/*
* Initialize hw specifications.
*/
u16 reg;
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
- return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+ return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u16 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
+ rt2x00_set_field16(®, MAC_CSR19_BIT8, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
/*
* Initialize hw specifications.
*/
* MAC_CSR19: GPIO control register.
*/
#define MAC_CSR19 0x0426
-#define MAC_CSR19_BIT0 FIELD32(0x0001)
-#define MAC_CSR19_BIT1 FIELD32(0x0002)
-#define MAC_CSR19_BIT2 FIELD32(0x0004)
-#define MAC_CSR19_BIT3 FIELD32(0x0008)
-#define MAC_CSR19_BIT4 FIELD32(0x0010)
-#define MAC_CSR19_BIT5 FIELD32(0x0020)
-#define MAC_CSR19_BIT6 FIELD32(0x0040)
-#define MAC_CSR19_BIT7 FIELD32(0x0080)
+#define MAC_CSR19_BIT0 FIELD16(0x0001)
+#define MAC_CSR19_BIT1 FIELD16(0x0002)
+#define MAC_CSR19_BIT2 FIELD16(0x0004)
+#define MAC_CSR19_BIT3 FIELD16(0x0008)
+#define MAC_CSR19_BIT4 FIELD16(0x0010)
+#define MAC_CSR19_BIT5 FIELD16(0x0020)
+#define MAC_CSR19_BIT6 FIELD16(0x0040)
+#define MAC_CSR19_BIT7 FIELD16(0x0080)
+#define MAC_CSR19_BIT8 FIELD16(0x0100)
/*
* MAC_CSR20: LED control register.
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
msleep(1);
rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
}
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
/*
* Initialize hw specifications.
*/
skb_pull(entry->skb, RXINFO_DESC_SIZE);
/*
- * FIXME: we need to check for rx_pkt_len validity
+ * Check for rx_pkt_len validity. Return if invalid, leaving
+ * rxdesc->size zeroed out by the upper level.
*/
+ if (unlikely(rx_pkt_len == 0 ||
+ rx_pkt_len > entry->queue->data_size)) {
+ ERROR(entry->queue->rt2x00dev,
+ "Bad frame size %d, forcing to 0\n", rx_pkt_len);
+ return;
+ }
+
rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
/*
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
/*
* Initialize hw specifications.
*/
{ USB_DEVICE(0x1690, 0x0744) },
{ USB_DEVICE(0x1690, 0x0761) },
{ USB_DEVICE(0x1690, 0x0764) },
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x179d) },
/* Cisco */
{ USB_DEVICE(0x167b, 0x4001) },
/* EnGenius */
{ USB_DEVICE(0x0b05, 0x1760) },
{ USB_DEVICE(0x0b05, 0x1761) },
{ USB_DEVICE(0x0b05, 0x1790) },
- { USB_DEVICE(0x0b05, 0x179d) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3262) },
{ USB_DEVICE(0x13d3, 0x3284) },
*/
if (unlikely(rxdesc.size == 0 ||
rxdesc.size > entry->queue->data_size)) {
- WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+ ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
rxdesc.size, entry->queue->data_size);
dev_kfree_skb(entry->skb);
goto renew_skb;
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Disable power saving.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT13, 1);
+ rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
/*
* Initialize hw specifications.
*/
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
/*
* MAC_CSR14: LED control register.
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT15, 0);
+ rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
/*
* Initialize hw specifications.
*/
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
+#define MAC_CSR13_BIT14 FIELD32(0x00004000)
+#define MAC_CSR13_BIT15 FIELD32(0x00008000)
/*
* MAC_CSR14: LED control register.
if (!parport_SPP_supported (p)) {
/* No port. */
kfree (priv);
+ kfree(ops);
return NULL;
}
parport_PS2_supported (p);
timedia_9079a,
timedia_9079b,
timedia_9079c,
+ wch_ch353_2s1p,
};
/* each element directly indexed from enum list, above */
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
};
static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
-
+ /* WCH CARDS */
+ { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
.base_baud = 921600,
.uart_offset = 8,
},
+ [wch_ch353_2s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
};
struct parport_serial_private {
#include <asm/io.h>
#include <asm/sizes.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <asm/irq.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2011 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
- * This can driver either of the two basic GPIO cores
- * available in the U300 platforms:
- * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
* Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
#include <linux/slab.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h>
-#include <mach/gpio-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
#include "pinctrl-coh901.h"
+#define U300_GPIO_PORT_STRIDE (0x30)
/*
- * Register definitions for COH 901 335 variant
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
*/
-#define U300_335_PORT_STRIDE (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_335_PXPDIR (0x00)
-#define U300_335_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_335_PXPCR (0x04)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_CR (0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+#define U300_GPIO_PXPDIR (0x04)
+#define U300_GPIO_PXPDOR (0x08)
+#define U300_GPIO_PXPCR (0x0C)
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_335_PXIEV (0x08)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_335_PXIEN (0x0C)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_335_PXIFR (0x10)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_335_PXICR (0x14)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER (0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+#define U300_GPIO_PXIEV (0x14)
+#define U300_GPIO_PXIEN (0x18)
+#define U300_GPIO_PXIFR (0x1C)
+#define U300_GPIO_PXICR (0x20)
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_335_PXPER (0x18)
-/* This register layout is the same in both blocks */
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_335_CR (0x54)
-#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-
-/*
- * Register definitions for COH 901 571 / 3 variant
- */
-#define U300_571_PORT_STRIDE (0x30)
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_571_CR (0x00)
-#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-/*
- * These registers have the same layout and function as the corresponding
- * COH 901 335 registers, just at different offset.
- */
-#define U300_571_PXPDIR (0x04)
-#define U300_571_PXPDOR (0x08)
-#define U300_571_PXPCR (0x0C)
-#define U300_571_PXPER (0x10)
-#define U300_571_PXIEV (0x14)
-#define U300_571_PXIEN (0x18)
-#define U300_571_PXIFR (0x1C)
-#define U300_571_PXICR (0x20)
/* 8 bits per port, no version has more than 7 ports */
#define U300_GPIO_PINS_PER_PORT 8
/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
#define BS335_GPIO_NUM_PORTS 7
-/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
-#define BS365_GPIO_NUM_PORTS 5
#define U300_FLOATING_INPUT { \
.bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \
.outval = 1, \
}
-
/* Initial configuration */
static const struct __initconst u300_gpio_confdata
bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
}
};
-static const struct __initconst u300_gpio_confdata
-bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
- /* Port 0, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_FLOATING_INPUT,
- },
- /* Port 1, pins 0-7 */
- {
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_FLOATING_INPUT,
- U300_OUTPUT_HIGH,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- },
- /* Port 2, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_PULL_UP_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 3, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 4, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- /* These 4 pins doesn't exist on DB3210 */
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- }
-};
-
/**
* to_u300_gpio() - get the pointer to u300_gpio
* @chip: the gpio chip member of the structure u300_gpio
const struct u300_gpio_confdata *conf;
int offset = (i*8) + j;
- if (plat->variant == U300_GPIO_COH901571_3_BS335)
- conf = &bs335_gpio_config[i][j];
- else if (plat->variant == U300_GPIO_COH901571_3_BS365)
- conf = &bs365_gpio_config[i][j];
- else
- break;
-
+ conf = &bs335_gpio_config[i][j];
u300_gpio_init_pin(gpio, offset, conf);
}
}
goto err_no_ioremap;
}
- if (plat->variant == U300_GPIO_COH901335) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 335\n");
- gpio->stride = U300_335_PORT_STRIDE;
- gpio->pcr = U300_335_PXPCR;
- gpio->dor = U300_335_PXPDOR;
- gpio->dir = U300_335_PXPDIR;
- gpio->per = U300_335_PXPER;
- gpio->icr = U300_335_PXICR;
- gpio->ien = U300_335_PXIEN;
- gpio->iev = U300_335_PXIEV;
- ifr = U300_335_PXIFR;
-
- /* Turn on the GPIO block */
- writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
- gpio->base + U300_335_CR);
- } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 571/3\n");
- gpio->stride = U300_571_PORT_STRIDE;
- gpio->pcr = U300_571_PXPCR;
- gpio->dor = U300_571_PXPDOR;
- gpio->dir = U300_571_PXPDIR;
- gpio->per = U300_571_PXPER;
- gpio->icr = U300_571_PXICR;
- gpio->ien = U300_571_PXIEN;
- gpio->iev = U300_571_PXIEV;
- ifr = U300_571_PXIFR;
-
- val = readl(gpio->base + U300_571_CR);
- dev_info(gpio->dev, "COH901571/3 block version: %d, " \
- "number of cores: %d totalling %d pins\n",
- ((val & 0x000001FC) >> 2),
- ((val & 0x0000FE00) >> 9),
- ((val & 0x0000FE00) >> 9) * 8);
- writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
- gpio->base + U300_571_CR);
- u300_gpio_init_coh901571(gpio, plat);
- } else {
- dev_err(gpio->dev, "unknown block variant\n");
- err = -ENODEV;
- goto err_unknown_variant;
- }
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_GPIO_PORT_STRIDE;
+ gpio->pcr = U300_GPIO_PXPCR;
+ gpio->dor = U300_GPIO_PXPDOR;
+ gpio->dir = U300_GPIO_PXPDIR;
+ gpio->per = U300_GPIO_PXPER;
+ gpio->icr = U300_GPIO_PXICR;
+ gpio->ien = U300_GPIO_PXIEN;
+ gpio->iev = U300_GPIO_PXIEV;
+ ifr = U300_GPIO_PXIFR;
+
+ val = readl(gpio->base + U300_GPIO_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_GPIO_CR);
+ u300_gpio_init_coh901571(gpio, plat);
/* Add each port with its IRQ separately */
INIT_LIST_HEAD(&gpio->port_list);
err_no_chip:
err_no_port:
u300_gpio_free_ports(gpio);
-err_unknown_variant:
iounmap(gpio->base);
err_no_ioremap:
release_mem_region(gpio->memres->start, resource_size(gpio->memres));
static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
struct u300_gpio *gpio = platform_get_drvdata(pdev);
int err;
/* Turn off the GPIO block */
- if (plat->variant == U300_GPIO_COH901335)
- writel(0x00000000U, gpio->base + U300_335_CR);
- if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365)
- writel(0x00000000U, gpio->base + U300_571_CR);
+ writel(0x00000000U, gpio->base + U300_GPIO_CR);
err = gpiochip_remove(&gpio->chip);
if (err < 0) {
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
seq_printf(s, " " DRIVER_NAME);
}
+static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev);
+ struct device_node *np;
+ struct property *prop;
+ const char *function, *group;
+ int ret, index = 0, count = 0;
+
+ /* calculate number of maps required */
+ for_each_child_of_node(np_config, np) {
+ ret = of_property_read_string(np, "sirf,function", &function);
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_count_strings(np, "sirf,pins");
+ if (ret < 0)
+ return ret;
+
+ count += ret;
+ }
+
+ if (!count) {
+ dev_err(spmx->dev, "No child nodes passed via DT\n");
+ return -ENODEV;
+ }
+
+ *map = kzalloc(sizeof(**map) * count, GFP_KERNEL);
+ if (!*map)
+ return -ENOMEM;
+
+ for_each_child_of_node(np_config, np) {
+ of_property_read_string(np, "sirf,function", &function);
+ of_property_for_each_string(np, "sirf,pins", prop, group) {
+ (*map)[index].type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)[index].data.mux.group = group;
+ (*map)[index].data.mux.function = function;
+ index++;
+ }
+ }
+
+ *num_maps = count;
+
+ return 0;
+}
+
+static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ kfree(map);
+}
+
static struct pinctrl_ops sirfsoc_pctrl_ops = {
.get_groups_count = sirfsoc_get_groups_count,
.get_group_name = sirfsoc_get_group_name,
.get_group_pins = sirfsoc_get_group_pins,
.pin_dbg_show = sirfsoc_pin_dbg_show,
+ .dt_node_to_map = sirfsoc_dt_node_to_map,
+ .dt_free_map = sirfsoc_dt_free_map,
};
struct sirfsoc_pmx_func {
}
static const struct of_device_id pinmux_ids[] __devinitconst = {
- { .compatible = "sirf,prima2-gpio-pinmux" },
+ { .compatible = "sirf,prima2-pinctrl" },
{}
};
interface->capability &= ~ACER_CAP_BRIGHTNESS;
pr_info("Brightness must be controlled by acpi video driver\n");
} else {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
}
if (wmi_has_guid(WMID_GUID3)) {
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
- outb(tmpval, port + i);
+ outb(tmpval, gmux_data->iostart + port + i);
}
}
u8 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inb(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
u32 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inl(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE);
if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) {
if (gmux_is_indexed(gmux_data)) {
+ u32 version;
mutex_init(&gmux_data->index_lock);
gmux_data->indexed = true;
+ version = gmux_read32(gmux_data,
+ GMUX_PORT_VERSION_MAJOR);
+ ver_major = (version >> 24) & 0xff;
+ ver_minor = (version >> 16) & 0xff;
+ ver_release = (version >> 8) & 0xff;
} else {
pr_info("gmux device not present\n");
ret = -ENODEV;
goto err_release;
}
- pr_info("Found indexed gmux\n");
- } else {
- pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor,
- ver_release);
}
+ pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
+ ver_release, (gmux_data->indexed ? "indexed" : "classic"));
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
* Disable the other backlight choices.
*/
acpi_video_dmi_promote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_unregister();
-#endif
apple_bl_unregister();
gmux_data->power_state = VGA_SWITCHEROO_ON;
kfree(gmux_data);
acpi_video_dmi_demote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_register();
-#endif
apple_bl_register();
}
static char *bled_type = "unknown";
module_param(wled_type, charp, 0444);
-MODULE_PARM_DESC(wlan_status, "Set the wled type on boot "
+MODULE_PARM_DESC(wled_type, "Set the wled type on boot "
"(unknown, led or rfkill). "
"default is unknown");
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp);
+ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "HRWS value : %#x\n",
+ len += sprintf(page + len, "HWRS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* The significance of others is yet to be found.
*/
status =
- acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result);
+ acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
if (!ACPI_FAILURE(status))
- pr_notice(" HRWS returned %x", (int)hwrs_result);
+ pr_notice(" HWRS returned %x", (int)hwrs_result);
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
#include "asus-wmi.h"
if (asus->driver->quirks->wmi_backlight_power)
acpi_video_dmi_promote_vendor();
if (!acpi_video_backlight_support()) {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
err = asus_wmi_backlight_init(asus);
if (err && err != -ENODEV)
goto fail_backlight;
if (!bus) {
pr_warn("Unable to find PCI bus 1?\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
pr_err("Unable to read PCI config space?\n");
- goto out_unlock;
+ goto out_put_dev;
}
absent = (l == 0xffffffff);
absent ? "absent" : "present");
pr_warn("skipped wireless hotplug as probably "
"inappropriate for this model\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (!blocked) {
if (dev) {
/* Device already present */
pci_dev_put(dev);
- goto out_unlock;
+ goto out_put_dev;
}
dev = pci_scan_single_device(bus, 0);
if (dev) {
pci_dev_put(dev);
}
}
+out_put_dev:
+ pci_dev_put(port);
}
out_unlock:
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/ctype.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
/*
* This driver is needed because a number of Samsung laptops do not hook
samsung->handle_backlight = false;
} else if (samsung->quirks->broken_acpi_video) {
pr_info("Disabling ACPI video driver\n");
-#ifdef CONFIG_ACPI_VIDEO
acpi_video_unregister();
-#endif
}
#endif
*/
static int acpi_evalf(acpi_handle handle,
- void *res, char *method, char *fmt, ...)
+ int *res, char *method, char *fmt, ...)
{
char *fmt0 = fmt;
struct acpi_object_list params;
success = (status == AE_OK &&
out_obj.type == ACPI_TYPE_INTEGER);
if (success && res)
- *(int *)res = out_obj.integer.value;
+ *res = out_obj.integer.value;
break;
case 'v': /* void */
success = status == AE_OK;
* Add TPACPI_FAN_RD_ACPI_FANS ? */
switch (fan_status_access_mode) {
- case TPACPI_FAN_RD_ACPI_GFAN:
+ case TPACPI_FAN_RD_ACPI_GFAN: {
/* 570, 600e/x, 770e, 770x */
+ int res;
- if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ if (unlikely(!acpi_evalf(gfan_handle, &res, NULL, "d")))
return -EIO;
if (likely(status))
- *status = s & 0x07;
+ *status = res & 0x07;
break;
-
+ }
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
#include <linux/pm_runtime.h>
#include <linux/power/smartreflex.h>
+#include <plat/cpu.h>
+
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
writel(period_cycles, pc->mmio_base + CAP3);
}
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ reg_val = readw(pc->mmio_base + ECCTL2);
+ /* Disable APWM mode to put APWM output Low */
+ reg_val &= ~ECCTL2_APWM_MODE;
+ writew(reg_val, pc->mmio_base + ECCTL2);
+ }
+
pm_runtime_put_sync(pc->chip.dev);
return 0;
}
struct pwm_chip chip;
unsigned int clk_rate;
void __iomem *mmio_base;
+ unsigned long period_cycles[NUM_PWM_CHANNEL];
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned short ps_divval, tb_divval;
+ int i;
if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
return -ERANGE;
duty_cycles = (unsigned long)c;
}
+ /*
+ * Period values should be same for multiple PWM channels as IP uses
+ * same period register for multiple channels.
+ */
+ for (i = 0; i < NUM_PWM_CHANNEL; i++) {
+ if (pc->period_cycles[i] &&
+ (pc->period_cycles[i] != period_cycles)) {
+ /*
+ * Allow channel to reconfigure period if no other
+ * channels being configured.
+ */
+ if (i == pwm->hwpwm)
+ continue;
+
+ dev_err(chip->dev, "Period value conflicts with channel %d\n",
+ i);
+ return -EINVAL;
+ }
+ }
+
+ pc->period_cycles[pwm->hwpwm] = period_cycles;
+
/* Configure clock prescaler to support Low frequency PWM wave */
if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
&tb_divval)) {
static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
+
+ /* set period value to zero on free */
+ pc->period_cycles[pwm->hwpwm] = 0;
}
static const struct pwm_ops ehrpwm_pwm_ops = {
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65217.h>
NULL),
};
+#ifdef CONFIG_OF
+static struct of_regulator_match reg_matches[] = {
+ { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
+ { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
+ { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
+ { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
+ { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
+ { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
+ { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
+};
+
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *node = tps->dev->of_node;
+ struct tps65217_board *pdata;
+ struct device_node *regs;
+ int i, count;
+
+ regs = of_find_node_by_name(node, "regulators");
+ if (!regs)
+ return NULL;
+
+ count = of_regulator_match(pdev->dev.parent, regs,
+ reg_matches, TPS65217_NUM_REGULATOR);
+ of_node_put(regs);
+ if ((count < 0) || (count > TPS65217_NUM_REGULATOR))
+ return NULL;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; i < count; i++) {
+ if (!reg_matches[i].init_data || !reg_matches[i].of_node)
+ continue;
+
+ pdata->tps65217_init_data[i] = reg_matches[i].init_data;
+ pdata->of_node[i] = reg_matches[i].of_node;
+ }
+
+ return pdata;
+}
+#else
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit tps65217_regulator_probe(struct platform_device *pdev)
{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct tps65217_board *pdata = dev_get_platdata(tps->dev);
+ struct regulator_init_data *reg_data;
struct regulator_dev *rdev;
- struct tps65217 *tps;
- struct tps_info *info = &tps65217_pmic_regs[pdev->id];
struct regulator_config config = { };
+ int i, ret;
- /* Already set by core driver */
- tps = dev_to_tps65217(pdev->dev.parent);
- tps->info[pdev->id] = info;
+ if (tps->dev->of_node)
+ pdata = tps65217_parse_dt(pdev);
- config.dev = &pdev->dev;
- config.of_node = pdev->dev.of_node;
- config.init_data = pdev->dev.platform_data;
- config.driver_data = tps;
+ if (!pdata) {
+ dev_err(&pdev->dev, "Platform data not found\n");
+ return -EINVAL;
+ }
- rdev = regulator_register(®ulators[pdev->id], &config);
- if (IS_ERR(rdev))
- return PTR_ERR(rdev);
+ if (tps65217_chip_id(tps) != TPS65217) {
+ dev_err(&pdev->dev, "Invalid tps chip version\n");
+ return -ENODEV;
+ }
- platform_set_drvdata(pdev, rdev);
+ platform_set_drvdata(pdev, tps);
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
+
+ reg_data = pdata->tps65217_init_data[i];
+
+ /*
+ * Regulator API handles empty constraints but not NULL
+ * constraints
+ */
+ if (!reg_data)
+ continue;
+
+ /* Register the regulators */
+ tps->info[i] = &tps65217_pmic_regs[i];
+
+ config.dev = tps->dev;
+ config.init_data = reg_data;
+ config.driver_data = tps;
+ config.regmap = tps->regmap;
+ if (tps->dev->of_node)
+ config.of_node = pdata->of_node[i];
+
+ rdev = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(tps->dev, "failed to register %s regulator\n",
+ pdev->name);
+ ret = PTR_ERR(rdev);
+ goto err_unregister_regulator;
+ }
+
+ /* Save regulator for cleanup */
+ tps->rdev[i] = rdev;
+ }
return 0;
+
+err_unregister_regulator:
+ while (--i >= 0)
+ regulator_unregister(tps->rdev[i]);
+
+ return ret;
}
static int __devexit tps65217_regulator_remove(struct platform_device *pdev)
{
- struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ struct tps65217 *tps = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
+ regulator_unregister(tps->rdev[i]);
platform_set_drvdata(pdev, NULL);
- regulator_unregister(rdev);
return 0;
}
.disable = tps6586x_regulator_disable,
};
+static struct regulator_ops tps6586x_sys_regulator_ops = {
+};
+
static const unsigned int tps6586x_ldo0_voltages[] = {
1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
};
TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
}
+#define TPS6586X_SYS_REGULATOR() \
+{ \
+ .desc = { \
+ .supply_name = "sys", \
+ .name = "REG-SYS", \
+ .ops = &tps6586x_sys_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = TPS6586X_ID_SYS, \
+ .owner = THIS_MODULE, \
+ }, \
+}
+
static struct tps6586x_regulator tps6586x_regulator[] = {
+ TPS6586X_SYS_REGULATOR(),
TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
- TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+ TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
+ TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
#include <linux/remoteproc.h>
#include <plat/mailbox.h>
-#include <plat/remoteproc.h>
+#include <linux/platform_data/remoteproc-omap.h>
#include "omap_remoteproc.h"
#include "remoteproc_internal.h"
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <mach/hardware.h>
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id pxa_rtc_dt_ids[] = {
+ { .compatible = "marvell,pxa-rtc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pxa_rtc_dt_ids);
+#endif
+
#ifdef CONFIG_PM
static int pxa_rtc_suspend(struct device *dev)
{
.remove = __exit_p(pxa_rtc_remove),
.driver = {
.name = "pxa-rtc",
+ .of_match_table = of_match_ptr(pxa_rtc_dt_ids),
#ifdef CONFIG_PM
.pm = &pxa_rtc_pm_ops,
#endif
static void raw3215_remove (struct ccw_device *cdev)
{
struct raw3215_info *raw;
+ unsigned int line;
ccw_device_set_offline(cdev);
raw = dev_get_drvdata(&cdev->dev);
if (raw) {
+ spin_lock(&raw3215_device_lock);
+ for (line = 0; line < NR_3215; line++)
+ if (raw3215[line] == raw)
+ break;
+ raw3215[line] = NULL;
+ spin_unlock(&raw3215_device_lock);
dev_set_drvdata(&cdev->dev, NULL);
raw3215_free_info(raw);
}
console_initcall(con3215_init);
#endif
+static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct raw3215_info *raw;
+
+ raw = raw3215[tty->index];
+ if (raw == NULL)
+ return -ENODEV;
+
+ tty->driver_data = raw;
+
+ return tty_port_install(&raw->port, driver, tty);
+}
+
/*
* tty3215_open
*
*/
static int tty3215_open(struct tty_struct *tty, struct file * filp)
{
- struct raw3215_info *raw;
+ struct raw3215_info *raw = tty->driver_data;
int retval;
- raw = raw3215[tty->index];
- if (raw == NULL)
- return -ENODEV;
-
- tty->driver_data = raw;
tty_port_tty_set(&raw->port, tty);
tty->low_latency = 0; /* don't use bottom half for pushing chars */
}
static const struct tty_operations tty3215_ops = {
+ .install = tty3215_install,
.open = tty3215_open,
.close = tty3215_close,
.write = tty3215_write,
driver->init_termios.c_lflag = ISIG | ECHO;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &sclp_ops);
+ tty_port_link_device(&sclp_port, driver, 0);
rc = tty_register_driver(driver);
if (rc) {
put_tty_driver(driver);
driver->init_termios = tty_std_termios;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &sclp_vt220_ops);
+ tty_port_link_device(&sclp_vt220_port, driver, 0);
rc = tty_register_driver(driver);
if (rc)
};
/*
- * This routine is called whenever a 3270 tty is opened.
+ * This routine is called whenever a 3270 tty is opened first time.
*/
-static int
-tty3270_open(struct tty_struct *tty, struct file * filp)
+static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct raw3270_view *view;
struct tty3270 *tp;
int i, rc;
- if (tty->count > 1)
- return 0;
/* Check if the tty3270 is already there. */
view = raw3270_find_view(&tty3270_fn,
tty->index + RAW3270_FIRSTMINOR);
/* why to reassign? */
tty_port_tty_set(&tp->port, tty);
tp->inattr = TF_INPUT;
- return 0;
+ return tty_port_install(&tp->port, driver, tty);
}
if (tty3270_max_index < tty->index + 1)
tty3270_max_index = tty->index + 1;
tty_port_tty_set(&tp->port, tty);
tty->low_latency = 0;
- tty->driver_data = tp;
tty->winsize.ws_row = tp->view.rows - 2;
tty->winsize.ws_col = tp->view.cols;
kbd_ascebc(tp->kbd, tp->view.ascebc);
raw3270_activate_view(&tp->view);
+
+ rc = tty_port_install(&tp->port, driver, tty);
+ if (rc) {
+ raw3270_put_view(&tp->view);
+ return rc;
+ }
+
+ tty->driver_data = tp;
+
return 0;
}
if (tp) {
tty->driver_data = NULL;
tty_port_tty_set(&tp->port, NULL);
- raw3270_put_view(&tp->view);
}
}
+static void tty3270_cleanup(struct tty_struct *tty)
+{
+ struct tty3270 *tp = tty->driver_data;
+
+ if (tp)
+ raw3270_put_view(&tp->view);
+}
+
/*
* We always have room.
*/
#endif
static const struct tty_operations tty3270_ops = {
- .open = tty3270_open,
+ .install = tty3270_install,
+ .cleanup = tty3270_cleanup,
.close = tty3270_close,
.write = tty3270_write,
.put_char = tty3270_put_char,
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
- driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV;
+ driver->flags = TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(driver, &tty3270_ops);
ret = tty_register_driver(driver);
if (ret) {
driver = tty3270_driver;
tty3270_driver = NULL;
tty_unregister_driver(driver);
+ put_tty_driver(driver);
tty3270_del_views();
}
{
const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
- const void __iomem *reg_dmadata = base + EESOX_DMADATA;
+ void __iomem *reg_dmadata = base + EESOX_DMADATA;
do {
unsigned int status;
spin_lock_init(&instance->cmd_pool_lock);
spin_lock_init(&instance->hba_lock);
spin_lock_init(&instance->completion_lock);
- spin_lock_init(&poll_aen_lock);
mutex_init(&instance->aen_mutex);
mutex_init(&instance->reset_mutex);
printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
MEGASAS_EXT_VERSION);
+ spin_lock_init(&poll_aen_lock);
+
support_poll_for_event = 2;
support_device_change = 1;
}
/* command line tunables for max controller queue depth */
- if (max_queue_depth != -1)
- max_request_credit = (max_queue_depth < facts->RequestCredit)
- ? max_queue_depth : facts->RequestCredit;
- else
+ if (max_queue_depth != -1 && max_queue_depth != 0) {
+ max_request_credit = min_t(u16, max_queue_depth +
+ ioc->hi_priority_depth + ioc->internal_depth,
+ facts->RequestCredit);
+ if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+ max_request_credit = MAX_HBA_QUEUE_DEPTH;
+ } else
max_request_credit = min_t(u16, facts->RequestCredit,
MAX_HBA_QUEUE_DEPTH);
/* set the scsi host can_queue depth
* with some internal commands that could be outstanding
*/
- ioc->shost->can_queue = ioc->scsiio_depth - (2);
+ ioc->shost->can_queue = ioc->scsiio_depth;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
"can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
#include <trace/events/scsi.h>
+static void scsi_eh_done(struct scsi_cmnd *scmd);
+
#define SENSE_TIMEOUT (10*HZ)
/*
if (! scsi_command_normalize_sense(scmd, &sshdr))
return FAILED; /* no valid sense data */
+ if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+ /*
+ * nasty: for mid-layer issued TURs, we need to return the
+ * actual sense data without any recovery attempt. For eh
+ * issued ones, we need to try to recover and interpret
+ */
+ return SUCCESS;
+
if (scsi_sense_is_deferred(&sshdr))
return NEEDS_RETRY;
}
if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
- req->errors = result;
if (result) {
if (sense_valid && req->sense) {
/*
if (!sense_deferred)
error = __scsi_error_from_host_byte(cmd, result);
}
+ /*
+ * __scsi_error_from_host_byte may have reset the host_byte
+ */
+ req->errors = cmd->result;
req->resid_len = scsi_get_resid(cmd);
sdev->model = (char *) (sdev->inquiry + 16);
sdev->rev = (char *) (sdev->inquiry + 32);
+ if (strncmp(sdev->vendor, "ATA ", 8) == 0) {
+ /*
+ * sata emulation layer device. This is a hack to work around
+ * the SATL power management specifications which state that
+ * when the SATL detects the device has gone into standby
+ * mode, it shall respond with NOT READY.
+ */
+ sdev->allow_restart = 1;
+ }
+
if (*bflags & BLIST_ISROM) {
sdev->type = TYPE_ROM;
sdev->removable = 1;
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sh_pfc.h>
struct sh_pfc_chip {
struct sh_pfc *pfc;
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
- depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
+ depends on ARCH_TEGRA && TEGRA20_APB_DMA
help
SPI driver for NVidia Tegra SoCs
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/edma.h>
#define SPI_NO_RESOURCE ((resource_size_t)-1)
#include <linux/scatterlist.h>
#include <linux/spi/spi.h>
-#include <mach/dma.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/dma-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#define SSPCR0 0x0000
#define SSPCR0_MODE_SHIFT 6
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
#define DRIVER_NAME "spi_imx"
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
/* usi registers offset */
#define USI_CNT 0x00
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
-#include <plat/omap7xx.h> /* OMAP7XX_IO_CONF registers */
+#include <mach/mux.h>
+
+#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
/* FIXME address is now a platform device resource,
#include <linux/spi/spi.h>
#include <plat/clock.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
#define SPI_AUTOSUSPEND_TIMEOUT 2000
#include <linux/of_gpio.h>
#include <mach/dma.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#define MAX_SPI_PORTS 3
* for the generic case.
*/
int dma_req_len;
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- struct tegra_dma_req rx_dma_req;
- struct tegra_dma_channel *rx_dma;
-#else
struct dma_chan *rx_dma;
struct dma_slave_config sconfig;
struct dma_async_tx_descriptor *rx_dma_desc;
dma_cookie_t rx_cookie;
-#endif
u32 *rx_bb;
dma_addr_t rx_bb_phys;
};
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
static void tegra_spi_rx_dma_complete(void *args);
-#endif
-
static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi,
unsigned long reg)
{
val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN;
val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1);
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.size = tspi->dma_req_len;
- tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req);
-#else
tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma,
tspi->rx_bb_phys, tspi->dma_req_len,
DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
tspi->rx_dma_desc->callback_param = tspi;
tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc);
dma_async_issue_pending(tspi->rx_dma);
-#endif
val |= SLINK_DMA_EN;
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
spin_unlock_irqrestore(&tspi->lock, flags);
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
-{
- struct spi_tegra_data *tspi = req->dev;
- handle_spi_rx_dma_complete(tspi);
-}
-#else
+
static void tegra_spi_rx_dma_complete(void *args)
{
struct spi_tegra_data *tspi = args;
handle_spi_rx_dma_complete(tspi);
}
-#endif
static int spi_tegra_setup(struct spi_device *spi)
{
struct spi_tegra_data *tspi;
struct resource *r;
int ret;
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
dma_cap_mask_t mask;
-#endif
master = spi_alloc_master(&pdev->dev, sizeof *tspi);
if (master == NULL) {
INIT_LIST_HEAD(&tspi->queue);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
- if (!tspi->rx_dma) {
- dev_err(&pdev->dev, "can not allocate rx dma channel\n");
- ret = -ENODEV;
- goto err3;
- }
-#else
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
tspi->rx_dma = dma_request_channel(mask, NULL, NULL);
goto err3;
}
-#endif
-
tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
&tspi->rx_bb_phys, GFP_KERNEL);
if (!tspi->rx_bb) {
goto err4;
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete;
- tspi->rx_dma_req.to_memory = 1;
- tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys;
- tspi->rx_dma_req.dest_bus_width = 32;
- tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO;
- tspi->rx_dma_req.source_bus_width = 32;
- tspi->rx_dma_req.source_wrap = 4;
- tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id];
- tspi->rx_dma_req.dev = tspi;
-#else
/* Dmaengine Dma slave config */
tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO;
ret);
goto err4;
}
-#endif
master->dev.of_node = pdev->dev.of_node;
ret = spi_register_master(master);
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
err4:
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
err3:
clk_put(tspi->clk);
err2:
tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
-
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
#define ANDROID_ALARM_WAIT _IO('a', 1)
#define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size)
+#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size)
+
/* Set alarm */
#define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec)
#define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec)
#define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec)
#define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0)))
#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4)
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in dio200_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via dio200_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return dio200_pci_common_attach(dev, pci_dev);
}
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc236_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc236_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc236_pci_common_attach(dev, pci_dev);
}
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc263_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc263_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc263_pci_common_attach(dev, pci_dev);
}
DRIVER_NAME ": BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci224_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci224_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci224_attach_common(dev, pci_dev, NULL);
}
"amplc_pci230: BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci230_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci230_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci230_attach_common(dev, pci_dev);
}
int chan;
lsb = data[0] & 0xff;
- msb = (data[0] >> 8) & 0xf;
+ msb = (data[0] >> 8) & 0xff;
chan = CR_CHAN(insn->chanspec);
.ai = das08_ai_rinsn,
.ai_nbits = 16,
.ai_pg = das08_pg_none,
- .ai_encoding = das08_encode12,
+ .ai_encoding = das08_encode16,
.ao = das08jr_ao_winsn,
.ao_nbits = 16,
.di = das08jr_di_rbits,
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in das08_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via das08_attach()
+ * has been removed.
+ */
+ pci_dev_get(pdev);
return das08_pci_attach_common(dev, pdev);
}
if (rx_array == NULL)
return -ENOMEM;
ret = lis3l02dq_read_all(indio_dev, rx_array);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(rx_array);
return ret;
+ }
for (i = 0; i < scan_count; i++)
data[i] = combine_8_to_16(rx_array[i*4+1],
rx_array[i*4+3]);
ret = strict_strtoul(buf, 10, &lval);
if (ret)
return ret;
+ if (lval == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (iio_buffer_enabled(indio_dev)) {
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (spi_get_device_id(st->us)) {
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ipoctal->pointer_read[i] = 0;
ipoctal->pointer_write[i] = 0;
ipoctal->nb_bytes[i] = 0;
- tty_register_device(tty, i, NULL);
+ tty_port_register_device(&ipoctal->tty_port[i], tty, i, NULL);
/*
* Enable again the RX. TX will be enabled when
struct ipoctal *ipoctal = tty->driver_data;
speed_t baud;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Disable and reset everything before change the setup */
ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
default:
mr1 |= MR1_CHRL_8_BITS;
/* By default, select CS8 */
- tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+ tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
break;
}
mr1 |= MR1_PARITY_OFF;
/* Mark or space parity is not supported */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
/* Set stop bits */
if (cflag & CSTOPB)
}
baud = tty_get_baud_rate(tty);
- tty_termios_encode_baud_rate(tty->termios, baud, baud);
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
/* Set baud rate */
- switch (tty->termios->c_ospeed) {
+ switch (baud) {
case 75:
csr |= TX_CLK_75 | RX_CLK_75;
break;
default:
csr |= TX_CLK_38400 | RX_CLK_38400;
/* In case of default, we establish 38400 bps */
- tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+ tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
break;
}
}
ret = mfd_add_devices(nvec->dev, -1, nvec_devices,
- ARRAY_SIZE(nvec_devices), base, 0);
+ ARRAY_SIZE(nvec_devices), base, 0, NULL);
if (ret)
dev_err(nvec->dev, "error adding subdevices\n");
mode->vsync_end = mode->vsync_start + timings->vsw;
mode->vtotal = mode->vsync_end + timings->vbp;
- /* note: whether or not it is interlaced, +/- h/vsync, etc,
- * which should be set in the mode flags, is not exposed in
- * the omap_video_timings struct.. but hdmi driver tracks
- * those separately so all we have to have to set the mode
- * is the way to recover these timings values, and the
- * omap_dss_driver would do the rest.
- */
+ mode->flags = 0;
+
+ if (timings->interlace)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+ if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
}
static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
timings->vfp = mode->vsync_start - mode->vdisplay;
timings->vsw = mode->vsync_end - mode->vsync_start;
timings->vbp = mode->vtotal - mode->vsync_end;
+
+ timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+ timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
}
static void omap_connector_dpms(struct drm_connector *connector, int mode)
}
} else {
struct drm_display_mode *mode = drm_mode_create(dev);
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
dssdrv->get_timings(dssdev, &timings);
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev = omap_connector->dssdev;
struct omap_dss_driver *dssdrv = dssdev->driver;
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
copy_timings_drm_to_omap(&timings, mode);
#include <linux/cdev.h>
#include <linux/uaccess.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include "ozconfig.h"
if (old_pd)
oz_pd_put(old_pd);
} else {
- if (!memcmp(addr, "\0\0\0\0\0\0", sizeof(addr))) {
+ if (is_zero_ether_addr(addr)) {
spin_lock_bh(&g_cdev.lock);
pd = g_cdev.active_pd;
g_cdev.active_pd = 0;
if (skb == NULL)
goto _recv_indicatepkt_drop;
skb->data = precv_frame->u.hdr.rx_data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail -
- precv_frame->u.hdr.rx_head);
-#else
- skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail;
-#endif
skb->len = precv_frame->u.hdr.len;
+ skb_set_tail_pointer(skb, skb->len);
if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
}
tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dbg("%s - bad tty pointer - exiting", __func__);
+ if (!tty)
return;
- }
data = urb->transfer_buffer;
goto exit;
}
- if (tty && RxCount) {
+ if (RxCount) {
flag_data = 0;
for (i = 0; i < RxCount; ++i) {
/* Look ahead code here */
dbg("%s - failed resubmitting read urb, error %d",
__func__, result);
else {
- if (tty && RxCount) {
+ if (RxCount) {
tty_flip_buffer_push(tty);
tty_schedule_flip(tty);
}
* Put this here to make it responsive to stty and defaults set by
* the tty layer
*/
- /* FIXME: is this needed? */
- /* qt_set_termios(tty, port, NULL); */
/* Check to see if we've set up our endpoint info yet */
if (port0->open_ports == 1) {
struct usb_serial_port *port,
struct ktermios *old_termios)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned char new_LCR = 0;
unsigned int cflag = termios->c_cflag;
unsigned int index;
index = tty->index - port->serial->minor;
- switch (cflag) {
+ switch (cflag & CSIZE) {
case CS5:
new_LCR |= SERIAL_5_DATA;
break;
new_LCR |= SERIAL_7_DATA;
break;
default:
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
case CS8:
new_LCR |= SERIAL_8_DATA;
break;
dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
}
- tty->termios->c_cflag &= ~CMSPAR;
+ termios->c_cflag &= ~CMSPAR;
/* FIXME: Error cases should be returning the actual bits changed only */
}
#ifndef _SPEAKUP_SERIAL_H
#define _SPEAKUP_SERIAL_H
-#include <linux/serial.h> /* for rs_table, serial constants &
- serial_uart_config */
+#include <linux/serial.h> /* for rs_table, serial constants */
#include <linux/serial_reg.h> /* for more serial constants */
#ifndef __sparc__
#include <asm/serial.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "synaptics_i2c_rmi4.h"
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
#include <plat/dmtimer.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
/* ----------------------------------- Host OS */
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
#include <dspbridge/host_os.h>
-#define OMAP34XX_WDT3_BASE (L4_PER_34XX_BASE + 0x30000)
+#define INT_34XX_WDT3_IRQ (36 + NR_IRQS)
static struct dsp_wdt_setting dsp_wdt;
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
#include <linux/platform_device.h>
} else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
cbHeaderSize += 6;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
- if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
(*pwType == cpu_to_le16(0xF380))) {
cbHeaderSize -= 8;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
// 802.1H
if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
if (pDevice->dwDiagRefCount == 0) {
- if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
(psEthHeader->wType == cpu_to_le16(0xF380))) {
memcpy((PBYTE) (pbyPayloadHead),
abySNAP_Bridgetunnel, 6);
Packet_Type = skb->data[ETH_HLEN+1];
Descriptor_type = skb->data[ETH_HLEN+1+1+2];
Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- /* 802.1x OR eapol-key challenge frame transfer */
- if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
- (Packet_Type == 3)) {
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ /* 802.1x OR eapol-key challenge frame transfer */
+ if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
+ (Packet_Type == 3)) {
bTxeapol_key = TRUE;
if(!(Key_info & BIT3) && //WPA or RSN group-key challenge
(Key_info & BIT8) && (Key_info & BIT9)) { //send 2/2 key
}
}
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- if (pDevice->byBBType != BB_TYPE_11A) {
- pDevice->wCurrentRate = RATE_1M;
- pDevice->byACKRate = RATE_1M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- } else {
- pDevice->wCurrentRate = RATE_6M;
- pDevice->byACKRate = RATE_6M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- }
- }
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ if (pDevice->byBBType != BB_TYPE_11A) {
+ pDevice->wCurrentRate = RATE_1M;
+ pDevice->byACKRate = RATE_1M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ } else {
+ pDevice->wCurrentRate = RATE_6M;
+ pDevice->byACKRate = RATE_6M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ }
+ }
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n",
if (bNeedEncryption == TRUE) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
- if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+ if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
bNeedEncryption = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
return result;
}
-int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_scan_request *request)
+int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
{
+ struct net_device *dev = request->wdev->netdev;
struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
wlandevice_t *wlandev = dev->ml_priv;
struct p80211msg_dot11req_scan msg1;
void *pampd, struct tmem_pool *pool,
struct tmem_oid *oid, uint32_t index)
{
- int ret = 0;
-
BUG_ON(!is_ephemeral(pool));
- zbud_decompress((struct page *)(data), pampd);
+ if (zbud_decompress((struct page *)(data), pampd) < 0)
+ return -EINVAL;
zbud_free_and_delist((struct zbud_hdr *)pampd);
atomic_dec(&zcache_curr_eph_pampd_count);
- return ret;
+ return 0;
}
/*
{
struct iscsi_session *sess = NULL;
struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf;
+ int ret;
sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL);
if (!sess) {
return -ENOMEM;
}
spin_lock(&sess_idr_lock);
- idr_get_new(&sess_idr, NULL, &sess->session_index);
+ ret = idr_get_new(&sess_idr, NULL, &sess->session_index);
spin_unlock(&sess_idr_lock);
+ if (ret < 0) {
+ pr_err("idr_get_new() for sess_idr failed\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_NO_RESOURCES);
+ kfree(sess);
+ return -ENOMEM;
+ }
+
sess->creation_time = get_jiffies_64();
spin_lock_init(&sess->session_stats_lock);
/*
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
}
+ if (cmd->data_length < 4) {
+ pr_warn("SET TARGET PORT GROUPS parameter list length %u too"
+ " small\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
unsigned char *buf;
u32 lun_count = 0, offset = 8, i;
+ if (se_cmd->data_length < 16) {
+ pr_warn("REPORT LUNS allocation length %u too small\n",
+ se_cmd->data_length);
+ se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(se_cmd);
if (!buf)
return -ENOMEM;
struct iblock_dev *ibd = dev->dev_ptr;
unsigned char *buf, *ptr = NULL;
sector_t lba;
- int size = cmd->data_length;
+ int size;
u32 range;
int ret = 0;
int dl, bd_dl;
+ if (cmd->data_length < 8) {
+ pr_warn("UNMAP parameter list length %u too small\n",
+ cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
dl = get_unaligned_be16(&buf[0]);
bd_dl = get_unaligned_be16(&buf[2]);
- size = min(size - 8, bd_dl);
+ size = cmd->data_length - 8;
+ if (bd_dl > size)
+ pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n",
+ cmd->data_length, bd_dl);
+ else
+ size = bd_dl;
+
if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) {
cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
ret = -EINVAL;
tidh_new->dest_local_nexus = 1;
list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+ if (cmd->data_length < 28) {
+ pr_warn("SPC-PR: Received PR OUT parameter list"
+ " length too small: %u\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ ret = -EINVAL;
+ goto out;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
* For a PERSISTENT RESERVE OUT specify initiator ports payload,
kfree(pdv);
}
-static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg)
+static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
+ unsigned char *sense_buffer)
{
struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr;
struct scsi_device *sd = pdv->pdv_sd;
* not been allocated because TCM is handling the emulation directly.
*/
if (!pt)
- return 0;
+ return;
cdb = &pt->pscsi_cdb[0];
result = pt->pscsi_result;
* Hack to make sure that Write-Protect modepage is set if R/O mode is
* forced.
*/
+ if (!cmd->se_deve || !cmd->data_length)
+ goto after_mode_sense;
+
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
(status_byte(result) << 1) == SAM_STAT_GOOD) {
- if (!cmd->se_deve)
- goto after_mode_sense;
-
if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) {
unsigned char *buf = transport_kmap_data_sg(cmd);
}
after_mode_sense:
- if (sd->type != TYPE_TAPE)
+ if (sd->type != TYPE_TAPE || !cmd->data_length)
goto after_mode_select;
/*
}
after_mode_select:
- if (status_byte(result) & CHECK_CONDITION)
- return 1;
-
- return 0;
+ if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) {
+ memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER);
+ cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ }
}
enum {
return -ENOMEM;
}
-static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd)
-{
- struct pscsi_plugin_task *pt = cmd->priv;
-
- return pt->pscsi_sense;
-}
-
/* pscsi_get_device_rev():
*
*
.check_configfs_dev_params = pscsi_check_configfs_dev_params,
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
- .get_sense_buffer = pscsi_get_sense_buffer,
.get_device_rev = pscsi_get_device_rev,
.get_device_type = pscsi_get_device_type,
.get_blocks = pscsi_get_blocks,
static int spc_emulate_request_sense(struct se_cmd *cmd)
{
unsigned char *cdb = cmd->t_task_cdb;
- unsigned char *buf;
+ unsigned char *rbuf;
u8 ua_asc = 0, ua_ascq = 0;
- int err = 0;
+ unsigned char buf[SE_SENSE_BUF];
+
+ memset(buf, 0, SE_SENSE_BUF);
if (cdb[1] & 0x01) {
pr_err("REQUEST_SENSE description emulation not"
return -ENOSYS;
}
- buf = transport_kmap_data_sg(cmd);
-
- if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
+ rbuf = transport_kmap_data_sg(cmd);
+ if (cmd->scsi_sense_reason != 0) {
+ /*
+ * Out of memory. We will fail with CHECK CONDITION, so
+ * we must not clear the unit attention condition.
+ */
+ target_complete_cmd(cmd, CHECK_CONDITION);
+ return 0;
+ } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
/*
* CURRENT ERROR, UNIT ATTENTION
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* The Additional Sense Code (ASC) from the UNIT ATTENTION
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* NO ADDITIONAL SENSE INFORMATION
*/
buf[7] = 0x0A;
}
-end:
- transport_kunmap_data_sg(cmd);
+ if (rbuf) {
+ memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length));
+ transport_kunmap_data_sg(cmd);
+ }
+
target_complete_cmd(cmd, GOOD);
return 0;
}
transport_generic_request_failure(cmd);
}
+/*
+ * Used when asking transport to copy Sense Data from the underlying
+ * Linux/SCSI struct scsi_cmnd
+ */
+static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd)
+{
+ unsigned char *buffer = cmd->sense_buffer;
+ struct se_device *dev = cmd->se_dev;
+ u32 offset = 0;
+
+ WARN_ON(!cmd->se_lun);
+
+ if (!dev)
+ return NULL;
+
+ if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION)
+ return NULL;
+
+ offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
+
+ /* Automatically padded */
+ cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
+
+ pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n",
+ dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
+ return &buffer[offset];
+}
+
void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
{
struct se_device *dev = cmd->se_dev;
cmd->transport_state &= ~CMD_T_BUSY;
if (dev && dev->transport->transport_complete) {
- if (dev->transport->transport_complete(cmd,
- cmd->t_data_sg) != 0) {
- cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ dev->transport->transport_complete(cmd,
+ cmd->t_data_sg,
+ transport_get_sense_buffer(cmd));
+ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)
success = 1;
- }
}
/*
/* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
goto out_invalid_cdb_field;
}
-
+ /*
+ * For the overflow case keep the existing fabric provided
+ * ->data_length. Otherwise for the underflow case, reset
+ * ->data_length to the smaller SCSI expected data transfer
+ * length.
+ */
if (size > cmd->data_length) {
cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
cmd->residual_count = (size - cmd->data_length);
} else {
cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
cmd->residual_count = (cmd->data_length - size);
+ cmd->data_length = size;
}
- cmd->data_length = size;
}
return 0;
}
EXPORT_SYMBOL(target_execute_cmd);
-/*
- * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd
- */
-static int transport_get_sense_data(struct se_cmd *cmd)
-{
- unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL;
- struct se_device *dev = cmd->se_dev;
- unsigned long flags;
- u32 offset = 0;
-
- WARN_ON(!cmd->se_lun);
-
- if (!dev)
- return 0;
-
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return 0;
- }
-
- if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE))
- goto out;
-
- if (!dev->transport->get_sense_buffer) {
- pr_err("dev->transport->get_sense_buffer is NULL\n");
- goto out;
- }
-
- sense_buffer = dev->transport->get_sense_buffer(cmd);
- if (!sense_buffer) {
- pr_err("ITT 0x%08x cmd %p: Unable to locate"
- " sense buffer for task with sense\n",
- cmd->se_tfo->get_task_tag(cmd), cmd);
- goto out;
- }
-
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
-
- memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER);
-
- /* Automatically padded */
- cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
-
- pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n",
- dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
- return 0;
-
-out:
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return -1;
-}
-
/*
* Process all commands up to the last received ORDERED task attribute which
* requires another blocking boundary
static void target_complete_ok_work(struct work_struct *work)
{
struct se_cmd *cmd = container_of(work, struct se_cmd, work);
- int reason = 0, ret;
+ int ret;
/*
* Check if we need to move delayed/dormant tasks from cmds on the
schedule_work(&cmd->se_dev->qf_work_queue);
/*
- * Check if we need to retrieve a sense buffer from
+ * Check if we need to send a sense buffer from
* the struct se_cmd in question.
*/
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) {
- if (transport_get_sense_data(cmd) < 0)
- reason = TCM_NON_EXISTENT_LUN;
-
- if (cmd->scsi_status) {
- ret = transport_send_check_condition_and_sense(
- cmd, reason, 1);
- if (ret == -EAGAIN || ret == -ENOMEM)
- goto queue_full;
+ WARN_ON(!cmd->scsi_status);
+ ret = transport_send_check_condition_and_sense(
+ cmd, 0, 1);
+ if (ret == -EAGAIN || ret == -ENOMEM)
+ goto queue_full;
- transport_lun_remove_cmd(cmd);
- transport_cmd_check_stop_to_fabric(cmd);
- return;
- }
+ transport_lun_remove_cmd(cmd);
+ transport_cmd_check_stop_to_fabric(cmd);
+ return;
}
/*
* Check for a callback, used by amongst other things
struct page **pages;
int i;
- BUG_ON(!sg);
/*
* We need to take into account a possible offset here for fabrics like
* tcm_loop who may be using a contig buffer from the SCSI midlayer for
*/
if (!cmd->t_data_nents)
return NULL;
- else if (cmd->t_data_nents == 1)
+
+ BUG_ON(!sg);
+ if (cmd->t_data_nents == 1)
return kmap(sg_page(sg)) + sg->offset;
/* >1 page. use vmap */
pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL);
- if (!pages)
+ if (!pages) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
/* convert sg[] to pages[] */
for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) {
cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL);
kfree(pages);
- if (!cmd->t_data_vmap)
+ if (!cmd->t_data_vmap) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
return cmd->t_data_vmap + cmd->t_data_sg[0].offset;
}
* into the fabric for data transfers, go ahead and complete it right
* away.
*/
- if (!cmd->data_length) {
+ if (!cmd->data_length &&
+ cmd->t_task_cdb[0] != REQUEST_SENSE &&
+ cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) {
spin_lock_irq(&cmd->t_state_lock);
cmd->t_state = TRANSPORT_COMPLETE;
cmd->transport_state |= CMD_T_ACTIVE;
spin_unlock_irq(&cmd->t_state_lock);
- if (cmd->t_task_cdb[0] == REQUEST_SENSE) {
- u8 ua_asc = 0, ua_ascq = 0;
-
- core_scsi3_ua_clear_for_request_sense(cmd,
- &ua_asc, &ua_ascq);
- }
-
INIT_WORK(&cmd->work, target_complete_ok_work);
queue_work(target_completion_wq, &cmd->work);
return 0;
tty_hangup(port->tty);
}
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (port->tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
custom.adkcon = AC_UARTBRK;
mb();
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
info->MCR &= ~(SER_DTR|SER_RTS);
rtsdtr_ctrl(info->MCR);
int bits;
unsigned long flags;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Byte size is always 8 bits plus parity bit if requested */
/* If the quotient is zero refuse the change */
if (!quot && old_termios) {
/* FIXME: Will need updating for new tty in the end */
- tty->termios->c_cflag &= ~CBAUD;
- tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+ tty->termios.c_cflag &= ~CBAUD;
+ tty->termios.c_cflag |= (old_termios->c_cflag & CBAUD);
baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600;
if (I_IXOFF(tty))
rs_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
info->MCR &= ~SER_RTS;
local_irq_save(flags);
else
rs_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
info->MCR |= SER_RTS;
local_irq_save(flags);
rtsdtr_ctrl(info->MCR);
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tty_lock();
+ tty_lock(tty);
tmp.line = tty->index;
tmp.port = state->port;
tmp.flags = state->tport.flags;
tmp.close_delay = state->tport.close_delay;
tmp.closing_wait = state->tport.closing_wait;
tmp.custom_divisor = state->custom_divisor;
- tty_unlock();
+ tty_unlock(tty);
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
- tty_lock();
+ tty_lock(tty);
change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
new_serial.custom_divisor != state->custom_divisor;
if (new_serial.irq || new_serial.port != state->port ||
new_serial.xmit_fifo_size != state->xmit_fifo_size) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
- tty_unlock();
+ tty_unlock(tty);
return -EPERM;
}
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
}
if (new_serial.baud_base < 9600) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
}
} else
retval = startup(tty, state);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
{
struct serial_state *info = tty->driver_data;
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
change_speed(tty, info, old_termios);
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
info->MCR |= SER_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->MCR |= SER_RTS;
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
+ (tty->termios.c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
}
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
- error = tty_register_driver(serial_driver);
- if (error)
- goto fail_put_tty_driver;
-
state = rs_table;
state->port = (int)&custom.serdatr; /* Just to give it a value */
state->custom_divisor = 0;
state->icount.overrun = state->icount.brk = 0;
tty_port_init(&state->tport);
state->tport.ops = &amiga_port_ops;
+ tty_port_link_device(&state->tport, serial_driver, 0);
+
+ error = tty_register_driver(serial_driver);
+ if (error)
+ goto fail_put_tty_driver;
printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL;
bfin_jc_driver->init_termios = tty_std_termios;
tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+ tty_port_link_device(&port, bfin_jc_driver, 0);
ret = tty_register_driver(bfin_jc_driver);
if (ret)
else
tty_hangup(tty);
}
- if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+ if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (mdm_status & CyCTS) {
/* cy_start isn't used
info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
free_page((unsigned long)temp);
}
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
tty_port_lower_dtr_rts(&info->port);
set_bit(TTY_IO_ERROR, &tty->flags);
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->port.close_wait,
+ wait_event_interruptible_tty(tty, info->port.close_wait,
!(info->port.flags & ASYNC_CLOSING));
return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
int baud, baud_rate = 0;
int i;
- if (!tty->termios) /* XXX can this happen at all? */
- return;
-
if (info->line == -1)
return;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/*
* Set up the tty->alt_speed kludge
cy_set_line_char(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
cy_start(tty);
}
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
+ (tty->termios.c_cflag & CLOCAL))
wake_up_interruptible(&info->port.open_wait);
#endif
} /* cy_set_termios */
info->throttle = 1;
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
cyy_change_rts_dtr(info, 0, TIOCM_RTS);
cy_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
card = info->card;
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
static int __init cy_detect_isa(void)
{
#ifdef CONFIG_ISA
+ struct cyclades_card *card;
unsigned short cy_isa_irq, nboard;
void __iomem *cy_isa_address;
- unsigned short i, j, cy_isa_nchan;
+ unsigned short i, j, k, cy_isa_nchan;
int isparam = 0;
nboard = 0;
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
- if (cy_card[j].base_addr == NULL)
+ card = &cy_card[j];
+ if (card->base_addr == NULL)
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
/* allocate IRQ */
if (request_irq(cy_isa_irq, cyy_interrupt,
- 0, "Cyclom-Y", &cy_card[j])) {
+ 0, "Cyclom-Y", card)) {
printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
"could not allocate IRQ#%d.\n",
(unsigned long)cy_isa_address, cy_isa_irq);
}
/* set cy_card */
- cy_card[j].base_addr = cy_isa_address;
- cy_card[j].ctl_addr.p9050 = NULL;
- cy_card[j].irq = (int)cy_isa_irq;
- cy_card[j].bus_index = 0;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
- cy_card[j].nports = cy_isa_nchan;
- if (cy_init_card(&cy_card[j])) {
- cy_card[j].base_addr = NULL;
- free_irq(cy_isa_irq, &cy_card[j]);
+ card->base_addr = cy_isa_address;
+ card->ctl_addr.p9050 = NULL;
+ card->irq = (int)cy_isa_irq;
+ card->bus_index = 0;
+ card->first_line = cy_next_channel;
+ card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+ card->nports = cy_isa_nchan;
+ if (cy_init_card(card)) {
+ card->base_addr = NULL;
+ free_irq(cy_isa_irq, card);
iounmap(cy_isa_address);
continue;
}
(unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
cy_isa_irq, cy_isa_nchan, cy_next_channel);
- for (j = cy_next_channel;
- j < cy_next_channel + cy_isa_nchan; j++)
- tty_register_device(cy_serial_driver, j, NULL);
+ for (k = 0, j = cy_next_channel;
+ j < cy_next_channel + cy_isa_nchan; j++, k++)
+ tty_port_register_device(&card->ports[k].port,
+ cy_serial_driver, j, NULL);
cy_next_channel += cy_isa_nchan;
}
return nboard;
static int __devinit cy_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ struct cyclades_card *card;
void __iomem *addr0 = NULL, *addr2 = NULL;
char *card_name = NULL;
u32 uninitialized_var(mailbox);
- unsigned int device_id, nchan = 0, card_no, i;
+ unsigned int device_id, nchan = 0, card_no, i, j;
unsigned char plx_ver;
int retval, irq;
}
/* fill the next cy_card structure available */
for (card_no = 0; card_no < NR_CARDS; card_no++) {
- if (cy_card[card_no].base_addr == NULL)
+ card = &cy_card[card_no];
+ if (card->base_addr == NULL)
break;
}
if (card_no == NR_CARDS) { /* no more cy_cards available */
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
/* allocate IRQ */
retval = request_irq(irq, cyy_interrupt,
- IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]);
+ IRQF_SHARED, "Cyclom-Y", card);
if (retval) {
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
}
- cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
+ card->num_chips = nchan / CyPORTS_PER_CHIP;
} else {
struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
struct ZFW_CTRL __iomem *zfw_ctrl;
zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- cy_card[card_no].hw_ver = mailbox;
- cy_card[card_no].num_chips = (unsigned int)-1;
- cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
+ card->hw_ver = mailbox;
+ card->num_chips = (unsigned int)-1;
+ card->board_ctrl = &zfw_ctrl->board_ctrl;
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
if (irq != 0 && irq != 255) {
retval = request_irq(irq, cyz_interrupt,
- IRQF_SHARED, "Cyclades-Z",
- &cy_card[card_no]);
+ IRQF_SHARED, "Cyclades-Z", card);
if (retval) {
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
}
/* set cy_card */
- cy_card[card_no].base_addr = addr2;
- cy_card[card_no].ctl_addr.p9050 = addr0;
- cy_card[card_no].irq = irq;
- cy_card[card_no].bus_index = 1;
- cy_card[card_no].first_line = cy_next_channel;
- cy_card[card_no].nports = nchan;
- retval = cy_init_card(&cy_card[card_no]);
+ card->base_addr = addr2;
+ card->ctl_addr.p9050 = addr0;
+ card->irq = irq;
+ card->bus_index = 1;
+ card->first_line = cy_next_channel;
+ card->nports = nchan;
+ retval = cy_init_card(card);
if (retval)
goto err_null;
- pci_set_drvdata(pdev, &cy_card[card_no]);
+ pci_set_drvdata(pdev, card);
if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
"port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
- for (i = cy_next_channel; i < cy_next_channel + nchan; i++)
- tty_register_device(cy_serial_driver, i, &pdev->dev);
+ for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++)
+ tty_port_register_device(&card->ports[j].port,
+ cy_serial_driver, i, &pdev->dev);
cy_next_channel += nchan;
return 0;
err_null:
- cy_card[card_no].base_addr = NULL;
- free_irq(irq, &cy_card[card_no]);
+ card->base_addr = NULL;
+ free_irq(irq, card);
err_unmap:
iounmap(addr0);
if (addr2)
goto error;
}
- bc->dev = tty_register_device(ehv_bc_driver, i, &pdev->dev);
+ tty_port_init(&bc->port);
+ bc->port.ops = &ehv_bc_tty_port_ops;
+
+ bc->dev = tty_port_register_device(&bc->port, ehv_bc_driver, i,
+ &pdev->dev);
if (IS_ERR(bc->dev)) {
ret = PTR_ERR(bc->dev);
dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret);
goto error;
}
- tty_port_init(&bc->port);
- bc->port.ops = &ehv_bc_tty_port_ops;
-
dev_set_drvdata(&pdev->dev, bc);
dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n",
hvc_kick();
}
+static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct hvc_struct *hp;
+ int rc;
+
+ /* Auto increments kref reference if found. */
+ if (!(hp = hvc_get_by_index(tty->index)))
+ return -ENODEV;
+
+ tty->driver_data = hp;
+
+ rc = tty_port_install(&hp->port, driver, tty);
+ if (rc)
+ tty_port_put(&hp->port);
+ return rc;
+}
+
/*
* The TTY interface won't be used until after the vio layer has exposed the vty
* adapter to the kernel.
*/
static int hvc_open(struct tty_struct *tty, struct file * filp)
{
- struct hvc_struct *hp;
+ struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
int rc = 0;
- /* Auto increments kref reference if found. */
- if (!(hp = hvc_get_by_index(tty->index)))
- return -ENODEV;
-
spin_lock_irqsave(&hp->port.lock, flags);
/* Check and then increment for fast path open. */
if (hp->port.count++ > 0) {
} /* else count == 0 */
spin_unlock_irqrestore(&hp->port.lock, flags);
- tty->driver_data = hp;
tty_port_tty_set(&hp->port, tty);
if (hp->ops->notifier_add)
hp->vtermno, hp->port.count);
spin_unlock_irqrestore(&hp->port.lock, flags);
}
+}
+
+static void hvc_cleanup(struct tty_struct *tty)
+{
+ struct hvc_struct *hp = tty->driver_data;
tty_port_put(&hp->port);
}
#endif
static const struct tty_operations hvc_ops = {
+ .install = hvc_install,
.open = hvc_open,
.close = hvc_close,
+ .cleanup = hvc_cleanup,
.write = hvc_write,
.hangup = hvc_hangup,
.unthrottle = hvc_unthrottle,
return NULL;
}
-/*
- * This is invoked via the tty_open interface when a user app connects to the
- * /dev node.
- */
-static int hvcs_open(struct tty_struct *tty, struct file *filp)
+static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct hvcs_struct *hvcsd;
- int rc, retval = 0;
- unsigned long flags;
- unsigned int irq;
struct vio_dev *vdev;
- unsigned long unit_address;
-
- if (tty->driver_data)
- goto fast_open;
+ unsigned long unit_address, flags;
+ unsigned int irq;
+ int retval;
/*
* Is there a vty-server that shares the same index?
* This function increments the kref index.
*/
- if (!(hvcsd = hvcs_get_by_index(tty->index))) {
+ hvcsd = hvcs_get_by_index(tty->index);
+ if (!hvcsd) {
printk(KERN_WARNING "HVCS: open failed, no device associated"
" with tty->index %d.\n", tty->index);
return -ENODEV;
spin_lock_irqsave(&hvcsd->lock, flags);
- if (hvcsd->connected == 0)
- if ((retval = hvcs_partner_connect(hvcsd)))
- goto error_release;
+ if (hvcsd->connected == 0) {
+ retval = hvcs_partner_connect(hvcsd);
+ if (retval) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_WARNING "HVCS: partner connect failed.\n");
+ goto err_put;
+ }
+ }
- hvcsd->port.count = 1;
+ hvcsd->port.count = 0;
hvcsd->port.tty = tty;
tty->driver_data = hvcsd;
* This must be done outside of the spinlock because it requests irqs
* and will grab the spinlock and free the connection if it fails.
*/
- if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
- tty_port_put(&hvcsd->port);
+ retval = hvcs_enable_device(hvcsd, unit_address, irq, vdev);
+ if (retval) {
printk(KERN_WARNING "HVCS: enable device failed.\n");
- return rc;
+ goto err_put;
}
- goto open_success;
+ retval = tty_port_install(&hvcsd->port, driver, tty);
+ if (retval)
+ goto err_irq;
-fast_open:
- hvcsd = tty->driver_data;
+ return 0;
+err_irq:
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_disable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ free_irq(irq, hvcsd);
+err_put:
+ tty_port_put(&hvcsd->port);
+
+ return retval;
+}
+
+/*
+ * This is invoked via the tty_open interface when a user app connects to the
+ * /dev node.
+ */
+static int hvcs_open(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned long flags;
spin_lock_irqsave(&hvcsd->lock, flags);
- tty_port_get(&hvcsd->port);
hvcsd->port.count++;
hvcsd->todo_mask |= HVCS_SCHED_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
-open_success:
hvcs_kick();
printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n",
hvcsd->vdev->unit_address );
return 0;
-
-error_release:
- spin_unlock_irqrestore(&hvcsd->lock, flags);
- tty_port_put(&hvcsd->port);
-
- printk(KERN_WARNING "HVCS: partner connect failed.\n");
- return retval;
}
static void hvcs_close(struct tty_struct *tty, struct file *filp)
tty->driver_data = NULL;
free_irq(irq, hvcsd);
- tty_port_put(&hvcsd->port);
return;
} else if (hvcsd->port.count < 0) {
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
}
spin_unlock_irqrestore(&hvcsd->lock, flags);
+}
+
+static void hvcs_cleanup(struct tty_struct * tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+
tty_port_put(&hvcsd->port);
}
}
static const struct tty_operations hvcs_ops = {
+ .install = hvcs_install,
.open = hvcs_open,
.close = hvcs_close,
+ .cleanup = hvcs_cleanup,
.hangup = hvcs_hangup,
.write = hvcs_write,
.write_room = hvcs_write_room,
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
+ tty_port_link_device(&hp->port, hvsi_driver, i);
+
ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
spin_unlock_irqrestore(&hp->lock, flags);
/* Clear our own DTR */
- if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL))
+ if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL))
hvsilib_write_mctrl(pv, 0);
/* Tear down the connection */
mutex_init(&ttys[j]->ipw_tty_mutex);
tty_port_init(&ttys[j]->port);
- tty_register_device(ipw_tty_driver, j, NULL);
+ tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL);
ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
if (secondary_channel_idx != -1)
port->status &= ~ISI_DCD;
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (header & ISI_CTS) {
port->port.tty->hw_stopped = 0;
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- tty->termios->c_cflag &= ~CBAUDEX;
+ tty->termios.c_cflag &= ~CBAUDEX;
else
baud += 15;
}
if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
return;
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_iflag == old_termios->c_iflag)
+ if (tty->termios.c_cflag == old_termios->c_cflag &&
+ tty->termios.c_iflag == old_termios->c_iflag)
return;
spin_lock_irqsave(&port->card->card_lock, flags);
spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
isicom_start(tty);
}
goto errunri;
for (index = 0; index < board->port_count; index++)
- tty_register_device(isicom_normal, board->index * 16 + index,
+ tty_port_register_device(&board->ports[index].port,
+ isicom_normal, board->index * 16 + index,
&pdev->dev);
return 0;
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
+static struct tty_port moxa_service_port;
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
tmp.dcd = 1;
ttyp = tty_port_tty_get(&p->port);
- if (!ttyp || !ttyp->termios)
+ if (!ttyp)
tmp.cflag = p->cflag;
else
- tmp.cflag = ttyp->termios->c_cflag;
+ tmp.cflag = ttyp->termios.c_cflag;
tty_kref_put(ttyp);
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp)))
const struct firmware *fw;
const char *file;
struct moxa_port *p;
- unsigned int i;
+ unsigned int i, first_idx;
int ret;
brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
mod_timer(&moxaTimer, jiffies + HZ / 50);
spin_unlock_bh(&moxa_lock);
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (i = 0; i < brd->numPorts; i++)
+ tty_port_register_device(&brd->ports[i].port, moxaDriver,
+ first_idx + i, dev);
+
return 0;
err_free:
kfree(brd->ports);
static void moxa_board_deinit(struct moxa_board_conf *brd)
{
- unsigned int a, opened;
+ unsigned int a, opened, first_idx;
mutex_lock(&moxa_openlock);
spin_lock_bh(&moxa_lock);
mutex_lock(&moxa_openlock);
}
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (a = 0; a < brd->numPorts; a++)
+ tty_unregister_device(moxaDriver, first_idx + a);
+
iounmap(brd->basemem);
brd->basemem = NULL;
kfree(brd->ports);
board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
if (board->basemem == NULL) {
dev_err(&pdev->dev, "can't remap io space 2\n");
+ retval = -ENOMEM;
goto err_reg;
}
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
- moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
- if (!moxaDriver)
- return -ENOMEM;
+
+ tty_port_init(&moxa_service_port);
+
+ moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(moxaDriver))
+ return PTR_ERR(moxaDriver);
moxaDriver->name = "ttyMX";
moxaDriver->major = ttymajor;
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
moxaDriver->init_termios.c_ispeed = 9600;
moxaDriver->init_termios.c_ospeed = 9600;
- moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
+ /* Having one more port only for ioctls is ugly */
+ tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
if (tty_register_driver(moxaDriver)) {
printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
mutex_lock(&ch->port.mutex);
if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
- moxa_set_tty_param(tty, tty->termios);
+ moxa_set_tty_param(tty, &tty->termios);
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
MoxaSetFifo(ch, ch->type == PORT_16550A);
static void moxa_close(struct tty_struct *tty, struct file *filp)
{
struct moxa_port *ch = tty->driver_data;
- ch->cflag = tty->termios->c_cflag;
+ ch->cflag = tty->termios.c_cflag;
tty_port_close(&ch->port, tty, filp);
}
static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
{
- register struct ktermios *ts = tty->termios;
+ register struct ktermios *ts = &tty->termios;
struct moxa_port *ch = tty->driver_data;
int rts, cts, txflow, rxflow, xany, baud;
int ret = 0;
unsigned char status;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
if (!info->ioaddr)
return ret;
wake_up_interruptible(&port->port.open_wait);
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
tty->hw_stopped = 0;
tty = tty_port_tty_get(port);
- if (!tty || !tty->termios)
+ if (!tty)
ms.cflag = ip->normal_termios.c_cflag;
else
- ms.cflag = tty->termios->c_cflag;
+ ms.cflag = tty->termios.c_cflag;
tty_kref_put(tty);
spin_lock_irq(&ip->slock);
status = inb(ip->ioaddr + UART_MSR);
tty = tty_port_tty_get(&ip->port);
- if (!tty || !tty->termios) {
+ if (!tty) {
cflag = ip->normal_termios.c_cflag;
iflag = ip->normal_termios.c_iflag;
me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
} else {
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
me->baudrate[p] = tty_get_baud_rate(tty);
}
tty_kref_put(tty);
}
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
}
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mxser_start(tty);
}
/* Handle sw stopped */
if ((old_termios->c_iflag & IXON) &&
- !(tty->termios->c_iflag & IXON)) {
+ !(tty->termios.c_iflag & IXON)) {
tty->stopped = 0;
if (info->board->chip_flag) {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
+static bool allow_overlapping_vector;
+module_param(allow_overlapping_vector, bool, S_IRUGO);
+MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
+
+static bool mxser_overlapping_vector(struct mxser_board *brd)
+{
+ return allow_overlapping_vector &&
+ brd->vector >= brd->ports[0].ioaddr &&
+ brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
+}
+
+static int mxser_request_vector(struct mxser_board *brd)
+{
+ if (mxser_overlapping_vector(brd))
+ return 0;
+ return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
+}
+
+static void mxser_release_vector(struct mxser_board *brd)
+{
+ if (mxser_overlapping_vector(brd))
+ return;
+ release_region(brd->vector, 1);
+}
+
static void mxser_release_ISA_res(struct mxser_board *brd)
{
free_irq(brd->irq, brd);
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
+ mxser_release_vector(brd);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
{
- int id, i, bits;
+ int id, i, bits, ret;
unsigned short regs[16], irq;
unsigned char scratch, scratch2;
8 * brd->info->nports - 1);
return -EIO;
}
- if (!request_region(brd->vector, 1, "mxser(vector)")) {
+
+ ret = mxser_request_vector(brd);
+ if (ret) {
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
printk(KERN_ERR "mxser: can't request interrupt vector region: "
"0x%.8lx-0x%.8lx\n",
brd->ports[0].ioaddr, brd->ports[0].ioaddr +
8 * brd->info->nports - 1);
- return -EIO;
+ return ret;
}
return brd->info->nports;
goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
- tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+ tty_port_register_device(&brd->ports[i].port, mxvar_sdriver,
+ brd->idx + i, &pdev->dev);
pci_set_drvdata(pdev, brd);
brd->idx = m * MXSER_PORTS_PER_BOARD;
for (i = 0; i < brd->info->nports; i++)
- tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
+ tty_port_register_device(&brd->ports[i].port,
+ mxvar_sdriver, brd->idx + i, NULL);
m++;
}
*/
struct gsm_msg {
- struct gsm_msg *next;
+ struct list_head list;
u8 addr; /* DLCI address + flags */
u8 ctrl; /* Control byte + flags */
unsigned int len; /* Length of data block (can be zero) */
unsigned int tx_bytes; /* TX data outstanding */
#define TX_THRESH_HI 8192
#define TX_THRESH_LO 2048
- struct gsm_msg *tx_head; /* Pending data packets */
- struct gsm_msg *tx_tail;
+ struct list_head tx_list; /* Pending data packets */
/* Control messages */
struct timer_list t2_timer; /* Retransmit timer for commands */
m->len = len;
m->addr = addr;
m->ctrl = ctrl;
- m->next = NULL;
+ INIT_LIST_HEAD(&m->list);
return m;
}
*
* The tty device has called us to indicate that room has appeared in
* the transmit queue. Ram more data into the pipe if we have any
+ * If we have been flow-stopped by a CMD_FCOFF, then we can only
+ * send messages on DLCI0 until CMD_FCON
*
* FIXME: lock against link layer control transmissions
*/
static void gsm_data_kick(struct gsm_mux *gsm)
{
- struct gsm_msg *msg = gsm->tx_head;
+ struct gsm_msg *msg, *nmsg;
int len;
int skip_sof = 0;
- /* FIXME: We need to apply this solely to data messages */
- if (gsm->constipated)
- return;
-
- while (gsm->tx_head != NULL) {
- msg = gsm->tx_head;
+ list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
+ if (gsm->constipated && msg->addr)
+ continue;
if (gsm->encoding != 0) {
gsm->txframe[0] = GSM1_SOF;
len = gsm_stuff_frame(msg->data,
len - skip_sof) < 0)
break;
/* FIXME: Can eliminate one SOF in many more cases */
- gsm->tx_head = msg->next;
- if (gsm->tx_head == NULL)
- gsm->tx_tail = NULL;
gsm->tx_bytes -= msg->len;
- kfree(msg);
/* For a burst of frames skip the extra SOF within the
burst */
skip_sof = 1;
+
+ list_del(&msg->list);
+ kfree(msg);
}
}
msg->data = dp;
/* Add to the actual output queue */
- if (gsm->tx_tail)
- gsm->tx_tail->next = msg;
- else
- gsm->tx_head = msg;
- gsm->tx_tail = msg;
+ list_add_tail(&msg->list, &gsm->tx_list);
gsm->tx_bytes += msg->len;
gsm_data_kick(gsm);
}
/* dlci->skb is locked by tx_lock */
if (dlci->skb == NULL) {
- dlci->skb = skb_dequeue(&dlci->skb_list);
+ dlci->skb = skb_dequeue_tail(&dlci->skb_list);
if (dlci->skb == NULL)
return 0;
first = 1;
if (len > gsm->mtu) {
if (dlci->adaption == 3) {
/* Over long frame, bin it */
- kfree_skb(dlci->skb);
+ dev_kfree_skb_any(dlci->skb);
dlci->skb = NULL;
return 0;
}
/* FIXME: need a timer or something to kick this so it can't
get stuck with no work outstanding and no buffer free */
- if (msg == NULL)
+ if (msg == NULL) {
+ skb_queue_tail(&dlci->skb_list, dlci->skb);
+ dlci->skb = NULL;
return -ENOMEM;
+ }
dp = msg->data;
if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
skb_pull(dlci->skb, len);
__gsm_data_queue(dlci, msg);
if (last) {
- kfree_skb(dlci->skb);
+ dev_kfree_skb_any(dlci->skb);
dlci->skb = NULL;
}
return size;
static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
{
unsigned long flags;
+ int sweep;
+
+ if (dlci->constipated)
+ return;
spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
/* If we have nothing running then we need to fire up */
+ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
if (dlci->gsm->tx_bytes == 0) {
if (dlci->net)
gsm_dlci_data_output_framed(dlci->gsm, dlci);
else
gsm_dlci_data_output(dlci->gsm, dlci);
- } else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
- gsm_dlci_data_sweep(dlci->gsm);
+ }
+ if (sweep)
+ gsm_dlci_data_sweep(dlci->gsm);
spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
}
{
int mlines = 0;
u8 brk = 0;
+ int fc;
/* The modem status command can either contain one octet (v.24 signals)
or two octets (v.24 signals + break signals). The length field will
else {
brk = modem & 0x7f;
modem = (modem >> 7) & 0x7f;
- };
+ }
/* Flow control/ready to communicate */
- if (modem & MDM_FC) {
+ fc = (modem & MDM_FC) || !(modem & MDM_RTR);
+ if (fc && !dlci->constipated) {
/* Need to throttle our output on this device */
dlci->constipated = 1;
- }
- if (modem & MDM_RTC) {
- mlines |= TIOCM_DSR | TIOCM_DTR;
+ } else if (!fc && dlci->constipated) {
dlci->constipated = 0;
gsm_dlci_data_kick(dlci);
}
+
/* Map modem bits */
+ if (modem & MDM_RTC)
+ mlines |= TIOCM_DSR | TIOCM_DTR;
if (modem & MDM_RTR)
mlines |= TIOCM_RTS | TIOCM_CTS;
if (modem & MDM_IC)
/* Carrier drop -> hangup */
if (tty) {
if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
- if (!(tty->termios->c_cflag & CLOCAL))
+ if (!(tty->termios.c_cflag & CLOCAL))
tty_hangup(tty);
if (brk & 0x01)
tty_insert_flip_char(tty, 0, TTY_BREAK);
u8 *data, int clen)
{
u8 buf[1];
+ unsigned long flags;
+
switch (command) {
case CMD_CLD: {
struct gsm_dlci *dlci = gsm->dlci[0];
gsm_control_reply(gsm, CMD_TEST, data, clen);
break;
case CMD_FCON:
- /* Modem wants us to STFU */
- gsm->constipated = 1;
- gsm_control_reply(gsm, CMD_FCON, NULL, 0);
- break;
- case CMD_FCOFF:
/* Modem can accept data again */
gsm->constipated = 0;
- gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
+ gsm_control_reply(gsm, CMD_FCON, NULL, 0);
/* Kick the link in case it is idling */
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ break;
+ case CMD_FCOFF:
+ /* Modem wants us to STFU */
+ gsm->constipated = 1;
+ gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
break;
case CMD_MSC:
/* Out of band modem line change indicator for a DLCI */
dlci->gsm->dlci[dlci->addr] = NULL;
kfifo_free(dlci->fifo);
while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
- kfree_skb(dlci->skb);
+ dev_kfree_skb(dlci->skb);
kfree(dlci);
}
{
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
- struct gsm_msg *txq;
+ struct gsm_msg *txq, *ntxq;
struct gsm_control *gc;
gsm->dead = 1;
if (gsm->dlci[i])
gsm_dlci_release(gsm->dlci[i]);
/* Now wipe the queues */
- for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) {
- gsm->tx_head = txq->next;
+ list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
- }
- gsm->tx_tail = NULL;
+ INIT_LIST_HEAD(&gsm->tx_list);
}
EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
}
spin_lock_init(&gsm->lock);
kref_init(&gsm->ref);
+ INIT_LIST_HEAD(&gsm->tx_list);
gsm->t1 = T1;
gsm->t2 = T2;
gsm->error(gsm, *dp, flags);
break;
default:
- WARN_ONCE("%s: unknown flag %d\n",
+ WARN_ONCE(1, "%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
/* Queue poll */
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
if (gsm->tx_bytes < TX_THRESH_LO) {
- spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_dlci_data_sweep(gsm);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
/**
.dtr_rts = gsm_dtr_rts,
};
-
-static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct gsm_mux *gsm;
struct gsm_dlci *dlci;
- struct tty_port *port;
unsigned int line = tty->index;
unsigned int mux = line >> 6;
+ bool alloc = false;
+ int ret;
line = line & 0x3F;
gsm = gsm_mux[mux];
if (gsm->dead)
return -EL2HLT;
+ /* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+ perspective as we don't have to worry about this if DLCI0 is lost */
+ if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+ return -EL2NSYNC;
dlci = gsm->dlci[line];
- if (dlci == NULL)
+ if (dlci == NULL) {
+ alloc = true;
dlci = gsm_dlci_alloc(gsm, line);
+ }
if (dlci == NULL)
return -ENOMEM;
- port = &dlci->port;
- port->count++;
+ ret = tty_port_install(&dlci->port, driver, tty);
+ if (ret) {
+ if (alloc)
+ dlci_put(dlci);
+ return ret;
+ }
+
tty->driver_data = dlci;
+
+ return 0;
+}
+
+static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ struct tty_port *port = &dlci->port;
+
+ port->count++;
dlci_get(dlci);
dlci_get(dlci->gsm->dlci[0]);
mux_get(dlci->gsm);
the RPN control message. This however rapidly gets nasty as we
then have to remap modem signals each way according to whether
our virtual cable is null modem etc .. */
- tty_termios_copy_hw(tty->termios, old);
+ tty_termios_copy_hw(&tty->termios, old);
}
static void gsmtty_throttle(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
dlci->modem_tx &= ~TIOCM_DTR;
dlci->throttled = 1;
/* Send an MSC with DTR cleared */
static void gsmtty_unthrottle(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
dlci->modem_tx |= TIOCM_DTR;
dlci->throttled = 0;
/* Send an MSC with DTR set */
/* Virtual ttys for the demux */
static const struct tty_operations gsmtty_ops = {
+ .install = gsmtty_install,
.open = gsmtty_open,
.close = gsmtty_close,
.write = gsmtty_write,
TRACE_L("read()");
- tty_lock();
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible_tty(pInfo->read_wait,
+ wait_event_interruptible_tty(tty, pInfo->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
}
ret = -EPERM;
unlock:
- tty_unlock();
+ tty_unlock(tty);
return ret;
}
pHeader->locks = 0;
pHeader->owner = NULL;
- tty_lock();
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
static void n_tty_set_room(struct tty_struct *tty)
{
- /* tty->read_cnt is not read locked ? */
- int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ int left;
int old_left;
+ /* tty->read_cnt is not read locked ? */
+ if (I_PARMRK(tty)) {
+ /* Multiply read_cnt by 3, since each byte might take up to
+ * three times as many spaces when PARMRK is set (depending on
+ * its flags, e.g. parity error). */
+ left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ } else
+ left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+
/*
* If we are doing input canonicalization, and there are no
* pending newlines, let characters through without limit, so
*/
if (tty->receive_room < TTY_THRESHOLD_THROTTLE)
tty_throttle(tty);
+
+ /* FIXME: there is a tiny race here if the receive room check runs
+ before the other work executes and empties the buffer (upping
+ the receiving room and unthrottling. We then throttle and get
+ stuck. This has been observed and traced down by Vincent Pillet/
+ We need to address this when we sort out out the rx path locking */
}
int is_ignored(int sig)
BUG_ON(!tty);
if (old)
- canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON;
+ canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
memset(&tty->read_flags, 0, sizeof tty->read_flags);
tty->canon_head = tty->read_tail;
do_it_again:
- BUG_ON(!tty->read_buf);
+ if (WARN_ON(!tty->read_buf))
+ return -EAGAIN;
c = job_control(tty, file);
if (c < 0)
if (tty->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
+ spin_lock_irqsave(&tty->read_lock, flags);
while (nr && tty->read_cnt) {
int eol;
eol = test_and_clear_bit(tty->read_tail,
tty->read_flags);
c = tty->read_buf[tty->read_tail];
- spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = ((tty->read_tail+1) &
(N_TTY_BUF_SIZE-1));
tty->read_cnt--;
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
+ spin_lock_irqsave(&tty->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
+ spin_lock_irqsave(&tty->read_lock, flags);
break;
}
+ spin_lock_irqsave(&tty->read_lock, flags);
}
+ spin_unlock_irqrestore(&tty->read_lock, flags);
if (retval)
break;
} else {
port->dc = dc;
tty_port_init(&port->port);
port->port.ops = &noz_tty_port_ops;
- tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
- &pdev->dev);
+ tty_dev = tty_port_register_device(&port->port, ntty_driver,
+ dc->index_start + i, &pdev->dev);
if (IS_ERR(tty_dev)) {
ret = PTR_ERR(tty_dev);
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
tty->packet = 0;
+ /* Review - krefs on tty_link ?? */
if (!tty->link)
return;
tty->link->packet = 0;
mutex_unlock(&devpts_mutex);
}
#endif
- tty_unlock();
+ tty_unlock(tty);
tty_vhangup(tty->link);
- tty_lock();
+ tty_lock(tty);
}
}
static void pty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
- tty->termios->c_cflag &= ~(CSIZE | PARENB);
- tty->termios->c_cflag |= (CS8 | CREAD);
+ tty->termios.c_cflag &= ~(CSIZE | PARENB);
+ tty->termios.c_cflag |= (CS8 | CREAD);
}
/**
return 0;
}
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-
-static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+/**
+ * pty_common_install - set up the pty pair
+ * @driver: the pty driver
+ * @tty: the tty being instantiated
+ * @bool: legacy, true if this is BSD style
+ *
+ * Perform the initial set up for the tty/pty pair. Called from the
+ * tty layer when the port is first opened.
+ *
+ * Locking: the caller must hold the tty_mutex
+ */
+static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
+ bool legacy)
{
struct tty_struct *o_tty;
+ struct tty_port *ports[2];
int idx = tty->index;
- int retval;
+ int retval = -ENOMEM;
o_tty = alloc_tty_struct();
if (!o_tty)
- return -ENOMEM;
+ goto err;
+ ports[0] = kmalloc(sizeof **ports, GFP_KERNEL);
+ ports[1] = kmalloc(sizeof **ports, GFP_KERNEL);
+ if (!ports[0] || !ports[1])
+ goto err_free_tty;
if (!try_module_get(driver->other->owner)) {
/* This cannot in fact currently happen */
- retval = -ENOMEM;
goto err_free_tty;
}
initialize_tty_struct(o_tty, driver->other, idx);
- /* We always use new tty termios data so we can do this
- the easy way .. */
- retval = tty_init_termios(tty);
- if (retval)
- goto err_deinit_tty;
-
- retval = tty_init_termios(o_tty);
- if (retval)
- goto err_free_termios;
+ if (legacy) {
+ /* We always use new tty termios data so we can do this
+ the easy way .. */
+ retval = tty_init_termios(tty);
+ if (retval)
+ goto err_deinit_tty;
+
+ retval = tty_init_termios(o_tty);
+ if (retval)
+ goto err_free_termios;
+
+ driver->other->ttys[idx] = o_tty;
+ driver->ttys[idx] = tty;
+ } else {
+ memset(&tty->termios_locked, 0, sizeof(tty->termios_locked));
+ tty->termios = driver->init_termios;
+ memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked));
+ o_tty->termios = driver->other->init_termios;
+ }
/*
* Everything allocated ... set up the o_tty structure.
*/
- driver->other->ttys[idx] = o_tty;
tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
+ tty_port_init(ports[0]);
+ tty_port_init(ports[1]);
+ o_tty->port = ports[0];
+ tty->port = ports[1];
tty_driver_kref_get(driver);
tty->count++;
- driver->ttys[idx] = tty;
return 0;
err_free_termios:
- tty_free_termios(tty);
+ if (legacy)
+ tty_free_termios(tty);
err_deinit_tty:
deinitialize_tty_struct(o_tty);
module_put(o_tty->driver->owner);
err_free_tty:
+ kfree(ports[0]);
+ kfree(ports[1]);
free_tty_struct(o_tty);
+err:
return retval;
}
+static void pty_cleanup(struct tty_struct *tty)
+{
+ kfree(tty->port);
+}
+
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ return pty_common_install(driver, tty, true);
+}
+
+static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct tty_struct *pair = tty->link;
+ driver->ttys[tty->index] = NULL;
+ if (pair)
+ pair->driver->ttys[pair->index] = NULL;
+}
+
static int pty_bsd_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_bsd_ioctl,
- .resize = pty_resize
+ .cleanup = pty_cleanup,
+ .resize = pty_resize,
+ .remove = pty_remove
};
static const struct tty_operations slave_pty_ops_bsd = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .resize = pty_resize
+ .cleanup = pty_cleanup,
+ .resize = pty_resize,
+ .remove = pty_remove
};
static void __init legacy_pty_init(void)
if (legacy_count <= 0)
return;
- pty_driver = alloc_tty_driver(legacy_count);
- if (!pty_driver)
+ pty_driver = tty_alloc_driver(legacy_count,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pty_driver))
panic("Couldn't allocate pty driver");
- pty_slave_driver = alloc_tty_driver(legacy_count);
- if (!pty_slave_driver)
+ pty_slave_driver = tty_alloc_driver(legacy_count,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pty_slave_driver))
panic("Couldn't allocate pty slave driver");
pty_driver->driver_name = "pty_master";
pty_driver->init_termios.c_lflag = 0;
pty_driver->init_termios.c_ispeed = 38400;
pty_driver->init_termios.c_ospeed = 38400;
- pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &master_pty_ops_bsd);
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_slave_driver->init_termios.c_ispeed = 38400;
pty_slave_driver->init_termios.c_ospeed = 38400;
- pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
return tty;
}
-static void pty_unix98_shutdown(struct tty_struct *tty)
-{
- tty_driver_remove_tty(tty->driver, tty);
- /* We have our own method as we don't use the tty index */
- kfree(tty->termios);
-}
-
/* We have no need to install and remove our tty objects as devpts does all
the work for us */
static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
- struct tty_struct *o_tty;
- int idx = tty->index;
-
- o_tty = alloc_tty_struct();
- if (!o_tty)
- return -ENOMEM;
- if (!try_module_get(driver->other->owner)) {
- /* This cannot in fact currently happen */
- goto err_free_tty;
- }
- initialize_tty_struct(o_tty, driver->other, idx);
-
- tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (tty->termios == NULL)
- goto err_free_mem;
- *tty->termios = driver->init_termios;
- tty->termios_locked = tty->termios + 1;
-
- o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (o_tty->termios == NULL)
- goto err_free_mem;
- *o_tty->termios = driver->other->init_termios;
- o_tty->termios_locked = o_tty->termios + 1;
-
- tty_driver_kref_get(driver->other);
- if (driver->subtype == PTY_TYPE_MASTER)
- o_tty->count++;
- /* Establish the links in both directions */
- tty->link = o_tty;
- o_tty->link = tty;
- /*
- * All structures have been allocated, so now we install them.
- * Failures after this point use release_tty to clean up, so
- * there's no need to null out the local pointers.
- */
- tty_driver_kref_get(driver);
- tty->count++;
- return 0;
-err_free_mem:
- deinitialize_tty_struct(o_tty);
- kfree(o_tty->termios);
- kfree(tty->termios);
- module_put(o_tty->driver->owner);
-err_free_tty:
- free_tty_struct(o_tty);
- return -ENOMEM;
-}
-
-static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
-{
+ return pty_common_install(driver, tty, false);
}
-static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
}
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
.install = pty_unix98_install,
- .remove = ptm_unix98_remove,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
- .shutdown = pty_unix98_shutdown,
- .resize = pty_resize
+ .resize = pty_resize,
+ .cleanup = pty_cleanup
};
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
.install = pty_unix98_install,
- .remove = pts_unix98_remove,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .shutdown = pty_unix98_shutdown
+ .cleanup = pty_cleanup,
};
/**
return retval;
/* find a device that is not in use. */
- tty_lock();
+ mutex_lock(&devpts_mutex);
index = devpts_new_index(inode);
- tty_unlock();
if (index < 0) {
retval = index;
goto err_file;
}
+ mutex_unlock(&devpts_mutex);
+
mutex_lock(&tty_mutex);
- mutex_lock(&devpts_mutex);
tty = tty_init_dev(ptm_driver, index);
- mutex_unlock(&devpts_mutex);
- tty_lock();
- mutex_unlock(&tty_mutex);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
goto out;
}
+ /* The tty returned here is locked so we can safely
+ drop the mutex */
+ mutex_unlock(&tty_mutex);
+
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
tty_add_file(tty, filp);
if (retval)
goto err_release;
- tty_unlock();
+ tty_unlock(tty);
return 0;
err_release:
- tty_unlock();
+ tty_unlock(tty);
tty_release(inode, filp);
return retval;
out:
+ mutex_unlock(&tty_mutex);
devpts_kill_index(inode, index);
- tty_unlock();
err_file:
+ mutex_unlock(&devpts_mutex);
tty_free_file(filp);
return retval;
}
static void __init unix98_pty_init(void)
{
- ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
- if (!ptm_driver)
+ ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_DEVPTS_MEM |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(ptm_driver))
panic("Couldn't allocate Unix98 ptm driver");
- pts_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
- if (!pts_driver)
+ pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_DEVPTS_MEM |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pts_driver))
panic("Couldn't allocate Unix98 pts driver");
ptm_driver->driver_name = "pty_master";
ptm_driver->init_termios.c_lflag = 0;
ptm_driver->init_termios.c_ispeed = 38400;
ptm_driver->init_termios.c_ospeed = 38400;
- ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
tty_set_operations(ptm_driver, &ptm_unix98_ops);
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pts_driver->init_termios.c_ispeed = 38400;
pts_driver->init_termios.c_ospeed = 38400;
- pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
tty_set_operations(pts_driver, &pty_unix98_ops);
spin_lock_init(&info->slock);
mutex_init(&info->write_mtx);
rp_table[line] = info;
- tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
- NULL);
+ tty_port_register_device(&info->port, rocket_driver, line,
+ pci_dev ? &pci_dev->dev : NULL);
}
/*
unsigned rocketMode;
int bits, baud, divisor;
CHANNEL_t *cp;
- struct ktermios *t = tty->termios;
+ struct ktermios *t = &tty->termios;
cp = &info->channel;
cflag = t->c_cflag;
tty->alt_speed = 460800;
configure_r_port(tty, info, NULL);
- if (tty->termios->c_cflag & CBAUD) {
+ if (tty->termios.c_cflag & CBAUD) {
sSetDTR(cp);
sSetRTS(cp);
}
if (rocket_paranoia_check(info, "rp_set_termios"))
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/*
* This driver doesn't support CS5 or CS6
*/
if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
- tty->termios->c_cflag =
+ tty->termios.c_cflag =
((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
/* Or CMSPAR */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
configure_r_port(tty, info, old_termios);
cp = &info->channel;
/* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) {
sClrDTR(cp);
sClrRTS(cp);
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
- if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
+ if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
+ if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS))
sSetRTS(cp);
sSetDTR(cp);
}
- if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rp_start(tty);
}
unsigned cflag;
int i;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
if (!(port = info->port))
return;
if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
return;
- info->is_cons = (tty->termios->c_line == N_TTY);
+ info->is_cons = (tty->termios.c_line == N_TTY);
printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
}
change_speed(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
+ tty->termios.c_line = N_TTY;
if (tty->ldisc.open)
(tty->ldisc.open)(tty);
}
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &rs_ops);
- if (tty_register_driver(serial_driver)) {
- put_tty_driver(serial_driver);
- printk(KERN_ERR "Couldn't register serial driver\n");
- return -ENOMEM;
- }
-
local_irq_save(flags);
for(i=0;i<NR_PORTS;i++) {
0,
"M68328_UART", info))
panic("Unable to attach 68328 serial interrupt\n");
+
+ tty_port_link_device(&info->tport, serial_driver, i);
}
local_irq_restore(flags);
+
+ if (tty_register_driver(serial_driver)) {
+ put_tty_driver(serial_driver);
+ printk(KERN_ERR "Couldn't register serial driver\n");
+ return -ENOMEM;
+ }
+
return 0;
}
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
+ int fifo_bug = 0;
switch (termios->c_cflag & CSIZE) {
case CS5:
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
+ if (termios->c_cflag & PARENB) {
cval |= UART_LCR_PARITY;
+ if (up->bugs & UART_BUG_PARITY)
+ fifo_bug = 1;
+ }
if (!(termios->c_cflag & PARODD))
cval |= UART_LCR_EPAR;
#ifdef CMSPAR
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
fcr = uart_config[port->type].fcr;
- if (baud < 2400) {
+ if (baud < 2400 || fifo_bug) {
fcr &= ~UART_FCR_TRIGGER_MASK;
fcr |= UART_FCR_TRIGGER_1;
}
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
if (cpu_is_omap1510() && is_omap_port(up)) {
if (baud == 115200) {
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
#endif
static int __devinit serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, i, irqflag = 0;
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (share_irqs)
irqflag = IRQF_SHARED;
for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.irqflags = p->irqflags;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.private_data = p->private_data;
- port.type = p->type;
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.handle_irq = p->handle_irq;
- port.handle_break = p->handle_break;
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.hub6 = p->hub6;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
"(IO%lx MEM%llx IRQ%d): %d\n", i,
static struct platform_device *serial8250_isa_devs;
/*
- * serial8250_register_port and serial8250_unregister_port allows for
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
* 16x50 serial ports to be configured at run-time, to support PCMCIA
* modems and PCI multiport cards.
*/
uart->port.regshift = up->port.regshift;
uart->port.iotype = up->port.iotype;
uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.private_data = up->port.private_data;
if (up->port.dev)
}
EXPORT_SYMBOL(serial8250_register_8250_port);
-/**
- * serial8250_register_port - register a serial port
- * @port: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
- struct uart_8250_port up;
-
- memset(&up, 0, sizeof(up));
- memcpy(&up.port, port, sizeof(*port));
- return serial8250_register_8250_port(&up);
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
/**
* serial8250_unregister_port - remove a 16x50 serial port at runtime
* @line: serial line number
#include <linux/serial_8250.h>
-struct uart_8250_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned short capabilities; /* port capabilities */
- unsigned short bugs; /* port bugs */
- unsigned int tx_loadsz; /* transmit fifo load size */
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char cur_iotype; /* Running I/O type */
-
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
-#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
- unsigned char lsr_saved_flags;
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
- unsigned char msr_saved_flags;
-
- /* 8250 specific callbacks */
- int (*dl_read)(struct uart_8250_port *);
- void (*dl_write)(struct uart_8250_port *, int);
-};
-
struct old_serial_port {
unsigned int uart;
unsigned int baud_base;
unsigned long irqflags;
};
-/*
- * This replaces serial_uart_config in include/linux/serial.h
- */
struct serial8250_config {
const char *name;
unsigned short fifo_size;
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
+#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */
#define PROBE_RSA (1 << 0)
#define PROBE_ANY (~0)
{
struct serial_card_info *info;
struct serial_card_type *type = id->data;
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long bus_addr;
unsigned int i;
ecard_set_drvdata(ec, info);
- memset(&port, 0, sizeof(struct uart_port));
- port.irq = ec->irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- port.uartclk = type->uartclk;
- port.iotype = UPIO_MEM;
- port.regshift = 2;
- port.dev = &ec->dev;
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+ uart.port.irq = ec->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = type->uartclk;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.regshift = 2;
+ uart.port.dev = &ec->dev;
for (i = 0; i < info->num_ports; i ++) {
- port.membase = info->vaddr + type->offset[i];
- port.mapbase = bus_addr + type->offset[i];
+ uart.port.membase = info->vaddr + type->offset[i];
+ uart.port.mapbase = bus_addr + type->offset[i];
- info->ports[i] = serial8250_register_port(&port);
+ info->ports[i] = serial8250_register_8250_port(&uart);
}
return 0;
static int __devinit dw8250_probe(struct platform_device *pdev)
{
- struct uart_port port = {};
+ struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct device_node *np = pdev->dev.of_node;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- port.private_data = data;
-
- spin_lock_init(&port.lock);
- port.mapbase = regs->start;
- port.irq = irq->start;
- port.handle_irq = dw8250_handle_irq;
- port.type = PORT_8250;
- port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ uart.port.private_data = data;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.mapbase = regs->start;
+ uart.port.irq = irq->start;
+ uart.port.handle_irq = dw8250_handle_irq;
+ uart.port.type = PORT_8250;
+ uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port.dev = &pdev->dev;
+ uart.port.dev = &pdev->dev;
- port.iotype = UPIO_MEM;
- port.serial_in = dw8250_serial_in;
- port.serial_out = dw8250_serial_out;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.serial_in = dw8250_serial_in;
+ uart.port.serial_out = dw8250_serial_out;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
- port.iotype = UPIO_MEM32;
- port.serial_in = dw8250_serial_in32;
- port.serial_out = dw8250_serial_out32;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.serial_in = dw8250_serial_in32;
+ uart.port.serial_out = dw8250_serial_out32;
break;
default:
dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
}
if (!of_property_read_u32(np, "reg-shift", &val))
- port.regshift = val;
+ uart.port.regshift = val;
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev, "no clock-frequency property set\n");
return -EINVAL;
}
- port.uartclk = val;
+ uart.port.uartclk = val;
- data->line = serial8250_register_port(&port);
+ data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
static int __init serial_init_chip(struct parisc_device *dev)
{
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long address;
int err;
if (dev->id.sversion != 0x8d)
address += 0x800;
- memset(&port, 0, sizeof(port));
- port.iotype = UPIO_MEM;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iotype = UPIO_MEM;
/* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
- port.uartclk = 7272727;
- port.mapbase = address;
- port.membase = ioremap_nocache(address, 16);
- port.irq = dev->irq;
- port.flags = UPF_BOOT_AUTOCONF;
- port.dev = &dev->dev;
-
- err = serial8250_register_port(&port);
+ uart.port.uartclk = 7272727;
+ uart.port.mapbase = address;
+ uart.port.membase = ioremap_nocache(address, 16);
+ uart.port.irq = dev->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF;
+ uart.port.dev = &dev->dev;
+
+ err = serial8250_register_8250_port(&uart);
if (err < 0) {
printk(KERN_WARNING
- "serial8250_register_port returned error %d\n", err);
- iounmap(port.membase);
+ "serial8250_register_8250_port returned error %d\n", err);
+ iounmap(uart.port.membase);
return err;
}
return 0;
}
#endif
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
port.iotype = UPIO_MEM;
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
port.regshift = 1;
port.dev = &d->dev;
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
- struct uart_port uport;
+ struct uart_8250_port uart;
struct hp300_port *port;
int i;
#endif
if (!port)
return -ENOMEM;
- memset(&uport, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
/* Memory mapped I/O */
- uport.iotype = UPIO_MEM;
- uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
| UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
- uport.irq = 0;
- uport.uartclk = HPAPCI_BAUD_BASE * 16;
- uport.mapbase = base;
- uport.membase = (char *)(base + DIO_VIRADDRBASE);
- uport.regshift = 2;
+ uart.port.irq = 0;
+ uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
+ uart.port.mapbase = base;
+ uart.port.membase = (char *)(base + DIO_VIRADDRBASE);
+ uart.port.regshift = 2;
- line = serial8250_register_port(&uport);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
- " %d irq %d failed\n", i, uport.irq);
+ " %d irq %d failed\n", i, uart.port.irq);
kfree(port);
continue;
}
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *,
const struct pciserial_board *,
- struct uart_port *, int);
+ struct uart_8250_port *, int);
void (*exit)(struct pci_dev *dev);
};
};
static int pci_default_setup(struct serial_private*,
- const struct pciserial_board*, struct uart_port*, int);
+ const struct pciserial_board*, struct uart_8250_port *, int);
static void moan_device(const char *str, struct pci_dev *dev)
{
}
static int
-setup_port(struct serial_private *priv, struct uart_port *port,
+setup_port(struct serial_private *priv, struct uart_8250_port *port,
int bar, int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
if (!priv->remapped_bar[bar])
return -ENOMEM;
- port->iotype = UPIO_MEM;
- port->iobase = 0;
- port->mapbase = base + offset;
- port->membase = priv->remapped_bar[bar] + offset;
- port->regshift = regshift;
+ port->port.iotype = UPIO_MEM;
+ port->port.iobase = 0;
+ port->port.mapbase = base + offset;
+ port->port.membase = priv->remapped_bar[bar] + offset;
+ port->port.regshift = regshift;
} else {
- port->iotype = UPIO_PORT;
- port->iobase = base + offset;
- port->mapbase = 0;
- port->membase = NULL;
- port->regshift = 0;
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = base + offset;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
}
return 0;
}
*/
static int addidata_apci7800_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
bar = FL_GET_BASE(board->flags);
*/
static int
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
static int
pci_hp_diva_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
static int pci_siig_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
static int
pci_timedia_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
static int
titan_400l_800l_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
static int
pci_ni8430_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
void __iomem *p;
unsigned long base, len;
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar;
return number_uarts;
}
-static int
-pci_default_setup(struct serial_private *priv,
+static int pci_asix_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
+{
+ port->bugs |= UART_BUG_PARITY;
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int pci_default_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
int ret;
ret = setup_port(priv, port, 0, 0, board->reg_shift);
- port->iotype = UPIO_MEM32;
- port->type = PORT_XSCALE;
- port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
- port->regshift = 2;
+ port->port.iotype = UPIO_MEM32;
+ port->port.type = PORT_XSCALE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->port.regshift = 2;
return ret;
}
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
}
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_NO_TXEN_TEST;
+ port->port.flags |= UPF_NO_TXEN_TEST;
printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
"[%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor,
static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_BUG_THRE;
- port->serial_in = kt_serial_in;
- port->handle_break = kt_handle_break;
+ port->port.flags |= UPF_BUG_THRE;
+ port->port.serial_in = kt_serial_in;
+ port->port.handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
+{
+ port->port.flags |= UPF_EXAR_EFR;
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int
+pci_wch_ch353_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_EXAR_EFR;
+ port->port.flags |= UPF_FIXED_TYPE;
+ port->port.type = PORT_16550A;
return pci_default_setup(priv, board, port, idx);
}
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
+#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
+#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
+#define PCI_VENDOR_ID_AGESTAR 0x5372
+#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
+#define PCI_VENDOR_ID_ASIX 0x9710
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_omegapci_setup,
- },
+ },
+ /* WCH CH353 2S1P card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /* WCH CH353 4S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /* WCH CH353 2S1PF card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /*
+ * ASIX devices with FIFO bug
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ASIX,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_asix_setup,
+ },
/*
* Default "match everything" terminator entry
*/
pbn_panacom,
pbn_panacom2,
pbn_panacom4,
- pbn_exsys_4055,
pbn_plx_romulus,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
.reg_shift = 7,
},
- [pbn_exsys_4055] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
/* I think this entry is broken - the first_offset looks wrong --rmk */
[pbn_plx_romulus] = {
.flags = FL_BASE2,
},
};
-static const struct pci_device_id softmodem_blacklist[] = {
+static const struct pci_device_id blacklist[] = {
+ /* softmodems */
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
+
+ /* multi-io cards handled by parport_serial */
+ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
};
/*
static int __devinit
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{
- const struct pci_device_id *blacklist;
+ const struct pci_device_id *bldev;
int num_iomem, num_port, first_port = -1, i;
/*
/*
* Do not access blacklisted devices that are known not to
- * feature serial ports.
+ * feature serial ports or are handled by other modules.
*/
- for (blacklist = softmodem_blacklist;
- blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
- blacklist++) {
- if (dev->vendor == blacklist->vendor &&
- dev->device == blacklist->device)
+ for (bldev = blacklist;
+ bldev < blacklist + ARRAY_SIZE(blacklist);
+ bldev++) {
+ if (dev->vendor == bldev->vendor &&
+ dev->device == bldev->device)
return -ENODEV;
}
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
- struct uart_port serial_port;
+ struct uart_8250_port uart;
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
priv->dev = dev;
priv->quirk = quirk;
- memset(&serial_port, 0, sizeof(struct uart_port));
- serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- serial_port.uartclk = board->base_baud * 16;
- serial_port.irq = get_pci_irq(dev, board);
- serial_port.dev = &dev->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = board->base_baud * 16;
+ uart.port.irq = get_pci_irq(dev, board);
+ uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
- if (quirk->setup(priv, board, &serial_port, i))
+ if (quirk->setup(priv, board, &uart, i))
break;
#ifdef SERIAL_DEBUG_PCI
printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- serial_port.iobase, serial_port.irq, serial_port.iotype);
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
#endif
- priv->line[i] = serial8250_register_port(&serial_port);
+ priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
break;
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS,
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
- pbn_exsys_4055 },
+ pbn_b2_4_115200 },
/*
* Megawolf Romulus PCI Serial Card, from Mike Hudson
* (Exoray@isys.ca)
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_omegapci },
+ /*
+ * AgeStar as-prs2-009
+ */
+ { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ /*
+ * WCH CH353 series devices: The 2S1P is handled by parport_serial
+ * so not listed here.
+ */
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_4_115200 },
+
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
static int __devinit
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
if (flags & UNKNOWN_DEV) {
return ret;
}
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
- port.irq = pnp_irq(dev, 0);
+ uart.port.irq = pnp_irq(dev, 0);
if (pnp_port_valid(dev, 0)) {
- port.iobase = pnp_port_start(dev, 0);
- port.iotype = UPIO_PORT;
+ uart.port.iobase = pnp_port_start(dev, 0);
+ uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
- port.mapbase = pnp_mem_start(dev, 0);
- port.iotype = UPIO_MEM;
- port.flags = UPF_IOREMAP;
+ uart.port.mapbase = pnp_mem_start(dev, 0);
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_IOREMAP;
} else
return -ENODEV;
#ifdef SERIAL_DEBUG_PNP
printk(KERN_DEBUG
"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- port.iobase, port.mapbase, port.irq, port.iotype);
+ uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
#endif
- port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- port.flags |= UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &dev->dev;
+ uart.port.flags |= UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &dev->dev;
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0)
return -ENODEV;
unsigned int prodid;
int multi; /* 1 = multifunction, > 1 = # ports */
void (*config)(struct pcmcia_device *);
- void (*setup)(struct pcmcia_device *, struct uart_port *);
+ void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
void (*wakeup)(struct pcmcia_device *);
int (*post)(struct pcmcia_device *);
};
* Elan VPU16551 UART with 14.7456MHz oscillator
* manfid 0x015D, 0x4C45
*/
-static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
{
- port->uartclk = 14745600;
+ uart->port.uartclk = 14745600;
}
static int quirk_post_ibm(struct pcmcia_device *link)
static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
unsigned int iobase, int irq)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;
- memset(&port, 0, sizeof (struct uart_port));
- port.iobase = iobase;
- port.irq = irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &handle->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iobase = iobase;
+ uart.port.irq = irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &handle->dev;
if (buggy_uart)
- port.flags |= UPF_BUGGY_UART;
+ uart.port.flags |= UPF_BUGGY_UART;
if (info->quirk && info->quirk->setup)
- info->quirk->setup(handle, &port);
+ info->quirk->setup(handle, &uart);
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
- printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
- "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
+ (unsigned long)iobase, irq);
return -EINVAL;
}
help
MAX3100 chip support
-config SERIAL_MAX3107
- tristate "MAX3107 support"
+config SERIAL_MAX310X
+ bool "MAX310X support"
depends on SPI
select SERIAL_CORE
+ select REGMAP_SPI if SPI
+ default n
help
- MAX3107 chip support
+ This selects support for an advanced UART from Maxim (Dallas).
+ Supported ICs are MAX3107, MAX3108.
+ Each IC contains 128 words each of receive and transmit FIFO
+ that can be controlled through I2C or high-speed SPI.
+
+ Say Y here if you want to support this ICs.
config SERIAL_DZ
bool "DECstation DZ serial driver"
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
and you want to use serial console, say Y. Otherwise, say N.
+config SERIAL_HS_LPC32XX
+ tristate "LPC32XX high speed serial port support"
+ depends on ARCH_LPC32XX && OF
+ select SERIAL_CORE
+ help
+ Support for the LPC32XX high speed serial ports (up to 900kbps).
+ Those are UARTs completely different from the Standard UARTs on the
+ LPC32XX SoC.
+ Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+ bool "Enable LPC32XX high speed UART serial console"
+ depends on SERIAL_HS_LPC32XX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you would like to be able to use one of the high speed serial
+ ports on the LPC32XX as the console, you can do so by answering
+ Y to this option.
+
config SERIAL_CORE
tristate
help
Support for Console on SC2681/SC2692 serial ports.
+config SERIAL_SCCNXP
+ bool "SCCNXP serial port support"
+ depends on !SERIAL_SC26XX
+ select SERIAL_CORE
+ default n
+ help
+ This selects support for an advanced UART from NXP (Philips).
+ Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
+ SC28L202, SCC68681 and SCC68692.
+ Positioned as a replacement for the driver SC26XX.
+
+config SERIAL_SCCNXP_CONSOLE
+ bool "Console on SCCNXP serial port"
+ depends on SERIAL_SCCNXP
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for console on SCCNXP serial ports.
+
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART"
depends on BLACKFIN
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
-obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
+obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
port->ops = &altera_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
- dev_set_drvdata(&pdev->dev, port);
+ platform_set_drvdata(pdev, port);
uart_add_one_port(&altera_uart_driver, port);
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
- struct uart_port *port = dev_get_drvdata(&pdev->dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
if (port) {
uart_remove_one_port(&altera_uart_driver, port);
- dev_set_drvdata(&pdev->dev, NULL);
+ platform_set_drvdata(pdev, NULL);
port->mapbase = 0;
}
struct uart_amba_port *uap = (struct uart_amba_port *)port;
int retval;
- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;
uap->port.uartclk = clk_get_rate(uap->clk);
return 0;
clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
}
static void
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
unsigned int lcrh_tx;
unsigned int lcrh_rx;
bool oversampling;
- bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
bool cts_event_workaround;
};
.lcrh_tx = ST_UART011_LCRH_TX,
.lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
- .interrupt_may_hang = true,
.dma_threshold = true,
.cts_event_workaround = true,
};
unsigned int old_cr; /* state during shutdown */
bool autorts;
char type[12];
- bool interrupt_may_hang; /* vendor-specific */
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
bool using_tx_dma;
return IRQ_RETVAL(handled);
}
-static unsigned int pl01x_tx_empty(struct uart_port *port)
+static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status = readw(uap->port.membase + UART01x_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
-static unsigned int pl01x_get_mctrl(struct uart_port *port)
+static unsigned int pl011_get_mctrl(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int result = 0;
}
#ifdef CONFIG_CONSOLE_POLL
-static int pl010_get_poll_char(struct uart_port *port)
+static int pl011_get_poll_char(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status;
return readw(uap->port.membase + UART01x_DR);
}
-static void pl010_put_poll_char(struct uart_port *port,
+static void pl011_put_poll_char(struct uart_port *port,
unsigned char ch)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
"could not set default pins\n");
}
- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;
uap->port.uartclk = clk_get_rate(uap->clk);
return 0;
clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
/* Optionally let pins go into sleep states */
if (!IS_ERR(uap->pins_sleep)) {
retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
/*
* Release the memory region(s) being used by 'port'
*/
-static void pl010_release_port(struct uart_port *port)
+static void pl011_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, SZ_4K);
}
/*
* Request the memory region(s) being used by 'port'
*/
-static int pl010_request_port(struct uart_port *port)
+static int pl011_request_port(struct uart_port *port)
{
return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
!= NULL ? 0 : -EBUSY;
/*
* Configure/autoconfigure the port.
*/
-static void pl010_config_port(struct uart_port *port, int flags)
+static void pl011_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_AMBA;
- pl010_request_port(port);
+ pl011_request_port(port);
}
}
/*
* verify the new serial_struct (for TIOCSSERIAL).
*/
-static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
}
static struct uart_ops amba_pl011_pops = {
- .tx_empty = pl01x_tx_empty,
+ .tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
- .get_mctrl = pl01x_get_mctrl,
+ .get_mctrl = pl011_get_mctrl,
.stop_tx = pl011_stop_tx,
.start_tx = pl011_start_tx,
.stop_rx = pl011_stop_rx,
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl010_release_port,
- .request_port = pl010_request_port,
- .config_port = pl010_config_port,
- .verify_port = pl010_verify_port,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = pl010_get_poll_char,
- .poll_put_char = pl010_put_poll_char,
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
#endif
};
.cons = AMBA_CONSOLE,
};
+static int pl011_probe_dt_alias(int index, struct device *dev)
+{
+ struct device_node *np;
+ static bool seen_dev_with_alias = false;
+ static bool seen_dev_without_alias = false;
+ int ret = index;
+
+ if (!IS_ENABLED(CONFIG_OF))
+ return ret;
+
+ np = dev->of_node;
+ if (!np)
+ return ret;
+
+ ret = of_alias_get_id(np, "serial");
+ if (IS_ERR_VALUE(ret)) {
+ seen_dev_without_alias = true;
+ ret = index;
+ } else {
+ seen_dev_with_alias = true;
+ if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+ dev_warn(dev, "requested serial port %d not available.\n", ret);
+ ret = index;
+ }
+ }
+
+ if (seen_dev_with_alias && seen_dev_without_alias)
+ dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
+
+ return ret;
+}
+
static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
goto out;
}
+ i = pl011_probe_dt_alias(i, &dev->dev);
+
base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
uap->fifosize = vendor->fifosize;
- uap->interrupt_may_hang = vendor->interrupt_may_hang;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
* To avoid losting RX interrupt, we reset IR function
* before sending data.
*/
- if (tty->termios->c_line == N_IRDA)
+ if (tty->termios.c_line == N_IRDA)
bfin_serial_reset_irda(port);
#ifdef CONFIG_SERIAL_BFIN_DMA
/* Calculate the chartime depending on baudrate, numbor of bits etc. */
static void update_char_time(struct e100_serial * info)
{
- tcflag_t cflags = info->port.tty->termios->c_cflag;
+ tcflag_t cflags = info->port.tty->termios.c_cflag;
int bits;
/* calc. number of bits / data byte */
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
- if (tty->termios->c_iflag & IXON ) {
+ if (tty->termios.c_iflag & IXON ) {
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
info->xmit.tail,SERIAL_XMIT_SIZE)));
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (tty->termios->c_iflag & IXON ) {
+ if (tty->termios.c_iflag & IXON ) {
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
descr[i].buf = 0;
}
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
/* hang up DTR and RTS if HUPCL is enabled */
e100_dtr(info, 0);
e100_rts(info, 0); /* could check CRTSCTS before doing this */
unsigned long flags;
/* first some safety checks */
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (!info->ioport)
return;
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* possibly, the tx/rx should be disabled first to do this safely */
info->ioport[REG_REC_CTRL] = info->rx_ctrl;
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (info->port.tty->termios->c_iflag & IXON ) {
+ if (info->port.tty->termios.c_iflag & IXON ) {
DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
STOP_CHAR(info->port.tty)));
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
/* Turn off RTS line */
e100_rts(info, 0);
}
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
/* Assert RTS line */
e100_rts(info, 1);
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
* separate termios for callout and dialin.
*/
if (info->flags & ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
+ info->normal_termios = tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
return 0;
}
- if (tty->termios->c_cflag & CLOCAL) {
+ if (tty->termios.c_cflag & CLOCAL) {
do_clocal = 1;
}
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
}
if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
- *tty->termios = info->normal_termios;
+ tty->termios = info->normal_termios;
change_speed(info);
}
B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
driver->init_termios.c_ispeed = 115200;
driver->init_termios.c_ospeed = 115200;
- driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &rs_ops);
serial_driver = driver;
- if (tty_register_driver(driver))
- panic("Couldn't register serial driver\n");
- /* do some initializing for the separate ports */
+ /* do some initializing for the separate ports */
for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
if (info->enabled) {
if (cris_request_io_interface(info->io_if,
printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
serial_driver->name, info->line, info->ioport);
}
+ tty_port_link_device(&info->port, driver, i);
}
+
+ if (tty_register_driver(driver))
+ panic("Couldn't register serial driver\n");
+
#ifdef CONFIG_ETRAX_FAST_TIMER
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
memset(fast_timers, 0, sizeof(fast_timers));
tty_port_init(pport);
pport->ops = &ifx_tty_port_ops;
ifx_dev->minor = IFX_SPI_TTY_ID;
- ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
- &ifx_dev->spi_dev->dev);
+ ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv,
+ ifx_dev->minor, &ifx_dev->spi_dev->dev);
if (IS_ERR(ifx_dev->tty_dev)) {
dev_dbg(&ifx_dev->spi_dev->dev,
"%s: registering tty device failed", __func__);
#include <asm/io.h>
#include <asm/irq.h>
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
/* Register definitions */
#define URXD0 0x0 /* Receiver Register */
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
unsigned short trcv_delay; /* transceiver delay */
struct clk *clk_ipg;
struct clk *clk_per;
- struct imx_uart_data *devdata;
+ const struct imx_uart_data *devdata;
};
struct imx_port_ucrs {
static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
{
unsigned int val;
- unsigned int ufcr_rfdiv;
-
- /* set receiver / transmitter trigger level.
- * RFDIV is set such way to satisfy requested uartclk value
- */
- val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
- / sport->port.uartclk;
-
- if(!ufcr_rfdiv)
- ufcr_rfdiv = 1;
-
- val |= UFCR_RFDIV_REG(ufcr_rfdiv);
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= TXTL << UFCR_TXTL_SHF | RXTL;
writel(val, sport->port.membase + UFCR);
-
return 0;
}
}
}
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
*/
/*
* Enable modem status interrupts
*/
- spin_lock_irqsave(&sport->port.lock,flags);
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock,flags);
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ unsigned long flags;
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
* Disable all interrupts, port and break condition.
*/
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
if (USE_IRDA(sport))
temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
struct imx_port *sport = imx_ports[co->index];
struct imx_port_ucrs old_ucr;
unsigned int ucr1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* First, save UCR1/2/3 and then disable interrupts
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
+ dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret);
goto unmap;
}
sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(sport->clk_ipg)) {
ret = PTR_ERR(sport->clk_ipg);
+ dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
goto unmap;
}
sport->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(sport->clk_per)) {
ret = PTR_ERR(sport->clk_per);
+ dev_err(&pdev->dev, "failed to get per clk: %d\n", ret);
goto unmap;
}
struct ioc3_port *port = get_ioc3_port(the_port);
struct ring *inring;
struct ring_entry *entry;
- struct port_hooks *hooks = port->ip_hooks;
+ struct port_hooks *hooks;
int byte_num;
char *sc;
int loop_counter;
BUG_ON(!(len >= 0));
BUG_ON(!port);
+ hooks = port->ip_hooks;
/* There is a nasty timing issue in the IOC3. When the rx_timer
* expires or the rx_high condition arises, we take an interrupt.
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, state->port.tty->termios,
+ ioc4_change_speed(the_port, &state->port.tty->termios,
(struct ktermios *)0);
return 0;
struct ioc4_port *port = get_ioc4_port(the_port, 0);
struct ring *inring;
struct ring_entry *entry;
- struct hooks *hooks = port->ip_hooks;
+ struct hooks *hooks;
int byte_num;
char *sc;
int loop_counter;
BUG_ON(!(len >= 0));
BUG_ON(!port);
+ hooks = port->ip_hooks;
/* There is a nasty timing issue in the IOC4. When the rx_timer
* expires or the rx_high condition arises, we take an interrupt.
struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- termios = port->state->port.tty->termios;
+ termios = &port->state->port.tty->termios;
if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- termios = port->state->port.tty->termios;
+ termios = &port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
channel->ch_c_oflag = termios->c_oflag;
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = port->state->port.tty->termios;
+ ts = &port->state->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
*input data and return immediately.
*/
if (!tp ||
- !(tp->termios->c_cflag & CREAD) ) {
+ !(tp->termios.c_cflag & CREAD) ) {
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
--- /dev/null
+/*
+ * High Speed Serial Ports on NXP LPC32xx SoC
+ *
+ * Authors: Kevin Wells <kevin.wells@nxp.com>
+ * Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/nmi.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/*
+ * High Speed UART register offsets
+ */
+#define LPC32XX_HSUART_FIFO(x) ((x) + 0x00)
+#define LPC32XX_HSUART_LEVEL(x) ((x) + 0x04)
+#define LPC32XX_HSUART_IIR(x) ((x) + 0x08)
+#define LPC32XX_HSUART_CTRL(x) ((x) + 0x0C)
+#define LPC32XX_HSUART_RATE(x) ((x) + 0x10)
+
+#define LPC32XX_HSU_BREAK_DATA (1 << 10)
+#define LPC32XX_HSU_ERROR_DATA (1 << 9)
+#define LPC32XX_HSU_RX_EMPTY (1 << 8)
+
+#define LPC32XX_HSU_TX_LEV(n) (((n) >> 8) & 0xFF)
+#define LPC32XX_HSU_RX_LEV(n) ((n) & 0xFF)
+
+#define LPC32XX_HSU_TX_INT_SET (1 << 6)
+#define LPC32XX_HSU_RX_OE_INT (1 << 5)
+#define LPC32XX_HSU_BRK_INT (1 << 4)
+#define LPC32XX_HSU_FE_INT (1 << 3)
+#define LPC32XX_HSU_RX_TIMEOUT_INT (1 << 2)
+#define LPC32XX_HSU_RX_TRIG_INT (1 << 1)
+#define LPC32XX_HSU_TX_INT (1 << 0)
+
+#define LPC32XX_HSU_HRTS_INV (1 << 21)
+#define LPC32XX_HSU_HRTS_TRIG_8B (0x0 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_16B (0x1 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_32B (0x2 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_48B (0x3 << 19)
+#define LPC32XX_HSU_HRTS_EN (1 << 18)
+#define LPC32XX_HSU_TMO_DISABLED (0x0 << 16)
+#define LPC32XX_HSU_TMO_INACT_4B (0x1 << 16)
+#define LPC32XX_HSU_TMO_INACT_8B (0x2 << 16)
+#define LPC32XX_HSU_TMO_INACT_16B (0x3 << 16)
+#define LPC32XX_HSU_HCTS_INV (1 << 15)
+#define LPC32XX_HSU_HCTS_EN (1 << 14)
+#define LPC32XX_HSU_OFFSET(n) ((n) << 9)
+#define LPC32XX_HSU_BREAK (1 << 8)
+#define LPC32XX_HSU_ERR_INT_EN (1 << 7)
+#define LPC32XX_HSU_RX_INT_EN (1 << 6)
+#define LPC32XX_HSU_TX_INT_EN (1 << 5)
+#define LPC32XX_HSU_RX_TL1B (0x0 << 2)
+#define LPC32XX_HSU_RX_TL4B (0x1 << 2)
+#define LPC32XX_HSU_RX_TL8B (0x2 << 2)
+#define LPC32XX_HSU_RX_TL16B (0x3 << 2)
+#define LPC32XX_HSU_RX_TL32B (0x4 << 2)
+#define LPC32XX_HSU_RX_TL48B (0x5 << 2)
+#define LPC32XX_HSU_TX_TLEMPTY (0x0 << 0)
+#define LPC32XX_HSU_TX_TL0B (0x0 << 0)
+#define LPC32XX_HSU_TX_TL4B (0x1 << 0)
+#define LPC32XX_HSU_TX_TL8B (0x2 << 0)
+#define LPC32XX_HSU_TX_TL16B (0x3 << 0)
+
+#define MODNAME "lpc32xx_hsuart"
+
+struct lpc32xx_hsuart_port {
+ struct uart_port port;
+};
+
+#define FIFO_READ_LIMIT 128
+#define MAX_PORTS 3
+#define LPC32XX_TTY_NAME "ttyTX"
+static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE
+static void wait_for_xmit_empty(struct uart_port *port)
+{
+ unsigned int timeout = 10000;
+
+ do {
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+ port->membase))) == 0)
+ break;
+ if (--timeout == 0)
+ break;
+ udelay(1);
+ } while (1);
+}
+
+static void wait_for_xmit_ready(struct uart_port *port)
+{
+ unsigned int timeout = 10000;
+
+ while (1) {
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+ port->membase))) < 32)
+ break;
+ if (--timeout == 0)
+ break;
+ udelay(1);
+ }
+}
+
+static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmit_ready(port);
+ writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index];
+ unsigned long flags;
+ int locked = 1;
+
+ touch_nmi_watchdog();
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&up->port.lock);
+ else
+ spin_lock(&up->port.lock);
+
+ uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
+ wait_for_xmit_empty(&up->port);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static int __init lpc32xx_hsuart_console_setup(struct console *co,
+ char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= MAX_PORTS)
+ co->index = 0;
+
+ port = &lpc32xx_hs_ports[co->index].port;
+ if (!port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver lpc32xx_hsuart_reg;
+static struct console lpc32xx_hsuart_console = {
+ .name = LPC32XX_TTY_NAME,
+ .write = lpc32xx_hsuart_console_write,
+ .device = uart_console_device,
+ .setup = lpc32xx_hsuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lpc32xx_hsuart_reg,
+};
+
+static int __init lpc32xx_hsuart_console_init(void)
+{
+ register_console(&lpc32xx_hsuart_console);
+ return 0;
+}
+console_initcall(lpc32xx_hsuart_console_init);
+
+#define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console)
+#else
+#define LPC32XX_HSUART_CONSOLE NULL
+#endif
+
+static struct uart_driver lpc32xx_hs_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = MODNAME,
+ .dev_name = LPC32XX_TTY_NAME,
+ .nr = MAX_PORTS,
+ .cons = LPC32XX_HSUART_CONSOLE,
+};
+static int uarts_registered;
+
+static unsigned int __serial_get_clock_div(unsigned long uartclk,
+ unsigned long rate)
+{
+ u32 div, goodrate, hsu_rate, l_hsu_rate, comprate;
+ u32 rate_diff;
+
+ /* Find the closest divider to get the desired clock rate */
+ div = uartclk / rate;
+ goodrate = hsu_rate = (div / 14) - 1;
+ if (hsu_rate != 0)
+ hsu_rate--;
+
+ /* Tweak divider */
+ l_hsu_rate = hsu_rate + 3;
+ rate_diff = 0xFFFFFFFF;
+
+ while (hsu_rate < l_hsu_rate) {
+ comprate = uartclk / ((hsu_rate + 1) * 14);
+ if (abs(comprate - rate) < rate_diff) {
+ goodrate = hsu_rate;
+ rate_diff = abs(comprate - rate);
+ }
+
+ hsu_rate++;
+ }
+ if (hsu_rate > 0xFF)
+ hsu_rate = 0xFF;
+
+ return goodrate;
+}
+
+static void __serial_uart_flush(struct uart_port *port)
+{
+ u32 tmp;
+ int cnt = 0;
+
+ while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
+ (cnt++ < FIFO_READ_LIMIT))
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void __serial_lpc32xx_rx(struct uart_port *port)
+{
+ unsigned int tmp, flag;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+ if (!tty) {
+ /* Discard data: no tty available */
+ while (!(readl(LPC32XX_HSUART_FIFO(port->membase)) &
+ LPC32XX_HSU_RX_EMPTY))
+ ;
+
+ return;
+ }
+
+ /* Read data from FIFO and push into terminal */
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+ while (!(tmp & LPC32XX_HSU_RX_EMPTY)) {
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (tmp & LPC32XX_HSU_ERROR_DATA) {
+ /* Framing error */
+ writel(LPC32XX_HSU_FE_INT,
+ LPC32XX_HSUART_IIR(port->membase));
+ port->icount.frame++;
+ flag = TTY_FRAME;
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+ }
+
+ tty_insert_flip_char(tty, (tmp & 0xFF), flag);
+
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+ }
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void __serial_lpc32xx_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int tmp;
+
+ if (port->x_char) {
+ writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ goto exit_tx;
+
+ /* Transfer data */
+ while (LPC32XX_HSU_TX_LEV(readl(
+ LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
+ writel((u32) xmit->buf[xmit->tail],
+ LPC32XX_HSUART_FIFO(port->membase));
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+exit_tx:
+ if (uart_circ_empty(xmit)) {
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+ }
+}
+
+static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+ u32 status;
+
+ spin_lock(&port->lock);
+
+ /* Read UART status and clear latched interrupts */
+ status = readl(LPC32XX_HSUART_IIR(port->membase));
+
+ if (status & LPC32XX_HSU_BRK_INT) {
+ /* Break received */
+ writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase));
+ port->icount.brk++;
+ uart_handle_break(port);
+ }
+
+ /* Framing error */
+ if (status & LPC32XX_HSU_FE_INT)
+ writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase));
+
+ if (status & LPC32XX_HSU_RX_OE_INT) {
+ /* Receive FIFO overrun */
+ writel(LPC32XX_HSU_RX_OE_INT,
+ LPC32XX_HSUART_IIR(port->membase));
+ port->icount.overrun++;
+ if (tty) {
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ tty_schedule_flip(tty);
+ }
+ }
+
+ /* Data received? */
+ if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) {
+ __serial_lpc32xx_rx(port);
+ if (tty)
+ tty_flip_buffer_push(tty);
+ }
+
+ /* Transmit data request? */
+ if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) {
+ writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase));
+ __serial_lpc32xx_tx(port);
+ }
+
+ spin_unlock(&port->lock);
+ tty_kref_put(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port)
+{
+ unsigned int ret = 0;
+
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0)
+ ret = TIOCSER_TEMT;
+
+ return ret;
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_set_mctrl(struct uart_port *port,
+ unsigned int mctrl)
+{
+ /* No signals are supported on HS UARTs */
+}
+
+/* port->lock is held by caller and interrupts are disabled. */
+static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port)
+{
+ /* No signals are supported on HS UARTs */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_stop_tx(struct uart_port *port)
+{
+ u32 tmp;
+
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_start_tx(struct uart_port *port)
+{
+ u32 tmp;
+
+ __serial_lpc32xx_tx(port);
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp |= LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_stop_rx(struct uart_port *port)
+{
+ u32 tmp;
+
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT |
+ LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_enable_ms(struct uart_port *port)
+{
+ /* Modem status is not supported */
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_break_ctl(struct uart_port *port,
+ int break_state)
+{
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&port->lock, flags);
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ if (break_state != 0)
+ tmp |= LPC32XX_HSU_BREAK;
+ else
+ tmp &= ~LPC32XX_HSU_BREAK;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+ int bit;
+ u32 tmp;
+
+ switch (mapbase) {
+ case LPC32XX_HS_UART1_BASE:
+ bit = 0;
+ break;
+ case LPC32XX_HS_UART2_BASE:
+ bit = 1;
+ break;
+ case LPC32XX_HS_UART7_BASE:
+ bit = 6;
+ break;
+ default:
+ WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+ return;
+ }
+
+ tmp = readl(LPC32XX_UARTCTL_CLOOP);
+ if (state)
+ tmp |= (1 << bit);
+ else
+ tmp &= ~(1 << bit);
+ writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+
+/* port->lock is not held. */
+static int serial_lpc32xx_startup(struct uart_port *port)
+{
+ int retval;
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ __serial_uart_flush(port);
+
+ writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+ LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+ LPC32XX_HSUART_IIR(port->membase));
+
+ writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+ /*
+ * Set receiver timeout, HSU offset of 20, no break, no interrupts,
+ * and default FIFO trigger levels
+ */
+ tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ retval = request_irq(port->irq, serial_lpc32xx_interrupt,
+ 0, MODNAME, port);
+ if (!retval)
+ writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN),
+ LPC32XX_HSUART_CTRL(port->membase));
+
+ return retval;
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_shutdown(struct uart_port *port)
+{
+ u32 tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, quot;
+ u32 tmp;
+
+ /* Always 8-bit, no parity, 1 stop bit */
+ termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+ termios->c_cflag |= CS8;
+
+ termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS);
+
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk / 14);
+
+ quot = __serial_get_clock_div(port->uartclk, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Ignore characters? */
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ if ((termios->c_cflag & CREAD) == 0)
+ tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+ else
+ tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ writel(quot, LPC32XX_HSUART_RATE(port->membase));
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *serial_lpc32xx_type(struct uart_port *port)
+{
+ return MODNAME;
+}
+
+static void serial_lpc32xx_release_port(struct uart_port *port)
+{
+ if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, SZ_4K);
+ }
+}
+
+static int serial_lpc32xx_request_port(struct uart_port *port)
+{
+ int ret = -ENODEV;
+
+ if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+ ret = 0;
+
+ if (!request_mem_region(port->mapbase, SZ_4K, MODNAME))
+ ret = -EBUSY;
+ else if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, SZ_4K);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, SZ_4K);
+ ret = -ENOMEM;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static void serial_lpc32xx_config_port(struct uart_port *port, int uflags)
+{
+ int ret;
+
+ ret = serial_lpc32xx_request_port(port);
+ if (ret < 0)
+ return;
+ port->type = PORT_UART00;
+ port->fifosize = 64;
+
+ __serial_uart_flush(port);
+
+ writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+ LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+ LPC32XX_HSUART_IIR(port->membase));
+
+ writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+ /* Set receiver timeout, HSU offset of 20, no break, no interrupts,
+ and default FIFO trigger levels */
+ writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B,
+ LPC32XX_HSUART_CTRL(port->membase));
+}
+
+static int serial_lpc32xx_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UART00)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+static struct uart_ops serial_lpc32xx_pops = {
+ .tx_empty = serial_lpc32xx_tx_empty,
+ .set_mctrl = serial_lpc32xx_set_mctrl,
+ .get_mctrl = serial_lpc32xx_get_mctrl,
+ .stop_tx = serial_lpc32xx_stop_tx,
+ .start_tx = serial_lpc32xx_start_tx,
+ .stop_rx = serial_lpc32xx_stop_rx,
+ .enable_ms = serial_lpc32xx_enable_ms,
+ .break_ctl = serial_lpc32xx_break_ctl,
+ .startup = serial_lpc32xx_startup,
+ .shutdown = serial_lpc32xx_shutdown,
+ .set_termios = serial_lpc32xx_set_termios,
+ .type = serial_lpc32xx_type,
+ .release_port = serial_lpc32xx_release_port,
+ .request_port = serial_lpc32xx_request_port,
+ .config_port = serial_lpc32xx_config_port,
+ .verify_port = serial_lpc32xx_verify_port,
+};
+
+/*
+ * Register a set of serial devices attached to a platform device
+ */
+static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
+ int ret = 0;
+ struct resource *res;
+
+ if (uarts_registered >= MAX_PORTS) {
+ dev_err(&pdev->dev,
+ "Error: Number of possible ports exceeded (%d)!\n",
+ uarts_registered + 1);
+ return -ENXIO;
+ }
+
+ memset(p, 0, sizeof(*p));
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Error getting mem resource for HS UART port %d\n",
+ uarts_registered);
+ return -ENXIO;
+ }
+ p->port.mapbase = res->start;
+ p->port.membase = NULL;
+
+ p->port.irq = platform_get_irq(pdev, 0);
+ if (p->port.irq < 0) {
+ dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
+ uarts_registered);
+ return p->port.irq;
+ }
+
+ p->port.iotype = UPIO_MEM32;
+ p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
+ p->port.regshift = 2;
+ p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+ p->port.dev = &pdev->dev;
+ p->port.ops = &serial_lpc32xx_pops;
+ p->port.line = uarts_registered++;
+ spin_lock_init(&p->port.lock);
+
+ /* send port to loopback mode by default */
+ lpc32xx_loopback_set(p->port.mapbase, 1);
+
+ ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port);
+
+ platform_set_drvdata(pdev, p);
+
+ return ret;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int serial_hs_lpc32xx_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_suspend_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+
+static int serial_hs_lpc32xx_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_resume_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+#else
+#define serial_hs_lpc32xx_suspend NULL
+#define serial_hs_lpc32xx_resume NULL
+#endif
+
+static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = {
+ { .compatible = "nxp,lpc3220-hsuart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
+
+static struct platform_driver serial_hs_lpc32xx_driver = {
+ .probe = serial_hs_lpc32xx_probe,
+ .remove = __devexit_p(serial_hs_lpc32xx_remove),
+ .suspend = serial_hs_lpc32xx_suspend,
+ .resume = serial_hs_lpc32xx_resume,
+ .driver = {
+ .name = MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = serial_hs_lpc32xx_dt_ids,
+ },
+};
+
+static int __init lpc32xx_hsuart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&lpc32xx_hs_reg);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&serial_hs_lpc32xx_driver);
+ if (ret)
+ uart_unregister_driver(&lpc32xx_hs_reg);
+
+ return ret;
+}
+
+static void __exit lpc32xx_hsuart_exit(void)
+{
+ platform_driver_unregister(&serial_hs_lpc32xx_driver);
+ uart_unregister_driver(&lpc32xx_hs_reg);
+}
+
+module_init(lpc32xx_hsuart_init);
+module_exit(lpc32xx_hsuart_exit);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver");
+MODULE_LICENSE("GPL");
#include <asm/io.h>
#include <asm/irq.h>
-#define PORT_M32R_BASE PORT_M32R_SIO
-#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
#define BAUD_RATE 115200
#include <linux/serial_core.h>
static struct irq_info irq_lists[NR_IRQS];
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
- [PORT_INDEX(PORT_M32R_SIO)] = {
- .name = "M32RSIO",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
-};
-
#ifdef CONFIG_SERIAL_M32R_PLDSIO
#define __sio_in(x) inw((unsigned long)(x))
spin_lock_irqsave(&up->port.lock, flags);
- up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
- up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+ up->port.fifosize = 1;
spin_unlock_irqrestore(&up->port.lock, flags);
}
static int
m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config))
+ if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
return -EINVAL;
return 0;
}
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
static struct uart_ops m32r_sio_pops = {
.tx_empty = m32r_sio_tx_empty,
.set_mctrl = m32r_sio_set_mctrl,
.shutdown = m32r_sio_shutdown,
.set_termios = m32r_sio_set_termios,
.pm = m32r_sio_pm,
- .type = m32r_sio_type,
.release_port = m32r_sio_release_port,
.request_port = m32r_sio_request_port,
.config_port = m32r_sio_config_port,
.resume = max3100_resume,
};
-static int __init max3100_init(void)
-{
- return spi_register_driver(&max3100_driver);
-}
-module_init(max3100_init);
-
-static void __exit max3100_exit(void)
-{
- spi_unregister_driver(&max3100_driver);
-}
-module_exit(max3100_exit);
+module_spi_driver(max3100_driver);
MODULE_DESCRIPTION("MAX3100 driver");
MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+++ /dev/null
-/*
- * max3107.c - spi uart protocol driver for Maxim 3107
- * Based on max3100.c
- * by Christian Pellegrin <chripell@evolware.org>
- * and max3110.c
- * by Feng Tang <feng.tang@intel.com>
- *
- * Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/module.h>
-#include "max3107.h"
-
-static const struct baud_table brg26_ext[] = {
- { 300, MAX3107_BRG26_B300 },
- { 600, MAX3107_BRG26_B600 },
- { 1200, MAX3107_BRG26_B1200 },
- { 2400, MAX3107_BRG26_B2400 },
- { 4800, MAX3107_BRG26_B4800 },
- { 9600, MAX3107_BRG26_B9600 },
- { 19200, MAX3107_BRG26_B19200 },
- { 57600, MAX3107_BRG26_B57600 },
- { 115200, MAX3107_BRG26_B115200 },
- { 230400, MAX3107_BRG26_B230400 },
- { 460800, MAX3107_BRG26_B460800 },
- { 921600, MAX3107_BRG26_B921600 },
- { 0, 0 }
-};
-
-static const struct baud_table brg13_int[] = {
- { 300, MAX3107_BRG13_IB300 },
- { 600, MAX3107_BRG13_IB600 },
- { 1200, MAX3107_BRG13_IB1200 },
- { 2400, MAX3107_BRG13_IB2400 },
- { 4800, MAX3107_BRG13_IB4800 },
- { 9600, MAX3107_BRG13_IB9600 },
- { 19200, MAX3107_BRG13_IB19200 },
- { 57600, MAX3107_BRG13_IB57600 },
- { 115200, MAX3107_BRG13_IB115200 },
- { 230400, MAX3107_BRG13_IB230400 },
- { 460800, MAX3107_BRG13_IB460800 },
- { 921600, MAX3107_BRG13_IB921600 },
- { 0, 0 }
-};
-
-static u32 get_new_brg(int baud, struct max3107_port *s)
-{
- int i;
- const struct baud_table *baud_tbl = s->baud_tbl;
-
- for (i = 0; i < 13; i++) {
- if (baud == baud_tbl[i].baud)
- return baud_tbl[i].new_brg;
- }
-
- return 0;
-}
-
-/* Perform SPI transfer for write/read of device register(s) */
-int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
-{
- struct spi_message spi_msg;
- struct spi_transfer spi_xfer;
-
- /* Initialize SPI ,message */
- spi_message_init(&spi_msg);
-
- /* Initialize SPI transfer */
- memset(&spi_xfer, 0, sizeof spi_xfer);
- spi_xfer.len = len;
- spi_xfer.tx_buf = tx;
- spi_xfer.rx_buf = rx;
- spi_xfer.speed_hz = MAX3107_SPI_SPEED;
-
- /* Add SPI transfer to SPI message */
- spi_message_add_tail(&spi_xfer, &spi_msg);
-
-#ifdef DBG_TRACE_SPI_DATA
- {
- int i;
- pr_info("tx len %d:\n", spi_xfer.len);
- for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
- pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
- pr_info("\n");
- }
-#endif
-
- /* Perform synchronous SPI transfer */
- if (spi_sync(s->spi, &spi_msg)) {
- dev_err(&s->spi->dev, "spi_sync failure\n");
- return -EIO;
- }
-
-#ifdef DBG_TRACE_SPI_DATA
- if (spi_xfer.rx_buf) {
- int i;
- pr_info("rx len %d:\n", spi_xfer.len);
- for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
- pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
- pr_info("\n");
- }
-#endif
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_rw);
-
-/* Puts received data to circular buffer */
-static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
- int len)
-{
- struct uart_port *port = &s->port;
- struct tty_struct *tty;
-
- if (!port->state)
- return;
-
- tty = port->state->port.tty;
- if (!tty)
- return;
-
- /* Insert received data */
- tty_insert_flip_string(tty, data, len);
- /* Update RX counter */
- port->icount.rx += len;
-}
-
-/* Handle data receiving */
-static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
-{
- int i;
- int j;
- int len; /* SPI transfer buffer length */
- u16 *buf;
- u8 *valid_str;
-
- if (!s->rx_enabled)
- /* RX is disabled */
- return;
-
- if (rxlvl == 0) {
- /* RX fifo is empty */
- return;
- } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
- dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
- /* Ensure sanity of RX level */
- rxlvl = MAX3107_RX_FIFO_SIZE;
- }
- if ((s->rxbuf == 0) || (s->rxstr == 0)) {
- dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
- return;
- }
- buf = s->rxbuf;
- valid_str = s->rxstr;
- while (rxlvl) {
- pr_debug("rxlvl %d\n", rxlvl);
- /* Clear buffer */
- memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
- len = 0;
- if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
- /* First disable RX FIFO interrupt */
- pr_debug("Disabling RX INT\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
- buf[0] |= s->irqen_reg;
- len++;
- }
- /* Just increase the length by amount of words in FIFO since
- * buffer was zeroed and SPI transfer of 0x0000 means reading
- * from RX FIFO
- */
- len += rxlvl;
- /* Append RX level query */
- buf[len] = MAX3107_RXFIFOLVL_REG;
- len++;
-
- /* Perform the SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
- dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
- return;
- }
-
- /* Skip RX FIFO interrupt disabling word if it was added */
- j = ((len - 1) - rxlvl);
- /* Read received words */
- for (i = 0; i < rxlvl; i++, j++)
- valid_str[i] = (u8)buf[j];
- put_data_to_circ_buf(s, valid_str, rxlvl);
- /* Get new RX level */
- rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
- }
-
- if (s->rx_enabled) {
- /* RX still enabled, re-enable RX FIFO interrupt */
- pr_debug("Enabling RX INT\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
- buf[0] |= s->irqen_reg;
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
- }
-
- /* Push the received data to receivers */
- if (s->port.state->port.tty)
- tty_flip_buffer_push(s->port.state->port.tty);
-}
-
-
-/* Handle data sending */
-static void max3107_handletx(struct max3107_port *s)
-{
- struct circ_buf *xmit = &s->port.state->xmit;
- int i;
- unsigned long flags;
- int len; /* SPI transfer buffer length */
- u16 *buf;
-
- if (!s->tx_fifo_empty)
- /* Don't send more data before previous data is sent */
- return;
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
- /* No data to send or TX is stopped */
- return;
-
- if (!s->txbuf) {
- dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
- return;
- }
- buf = s->txbuf;
- /* Get length of data pending in circular buffer */
- len = uart_circ_chars_pending(xmit);
- if (len) {
- /* Limit to size of TX FIFO */
- if (len > MAX3107_TX_FIFO_SIZE)
- len = MAX3107_TX_FIFO_SIZE;
-
- pr_debug("txlen %d\n", len);
-
- /* Update TX counter */
- s->port.icount.tx += len;
-
- /* TX FIFO will no longer be empty */
- s->tx_fifo_empty = 0;
-
- i = 0;
- if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
- /* First disable TX empty interrupt */
- pr_debug("Disabling TE INT\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
- buf[i] |= s->irqen_reg;
- i++;
- len++;
- }
- /* Add data to send */
- spin_lock_irqsave(&s->port.lock, flags);
- for ( ; i < len ; i++) {
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
- buf[i] |= ((u16)xmit->buf[xmit->tail] &
- MAX3107_SPI_TX_DATA_MASK);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- }
- spin_unlock_irqrestore(&s->port.lock, flags);
- if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
- /* Enable TX empty interrupt */
- pr_debug("Enabling TE INT\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
- buf[i] |= s->irqen_reg;
- i++;
- len++;
- }
- if (!s->tx_enabled) {
- /* Enable TX */
- pr_debug("Enable TX\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
- buf[i] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
- s->tx_enabled = 1;
- i++;
- len++;
- }
-
- /* Perform the SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
- dev_err(&s->spi->dev,
- "SPI transfer TX handling failed\n");
- return;
- }
- }
-
- /* Indicate wake up if circular buffer is getting low on data */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&s->port);
-
-}
-
-/* Handle interrupts
- * Also reads and returns current RX FIFO level
- */
-static u16 handle_interrupt(struct max3107_port *s)
-{
- u16 buf[4]; /* Buffer for SPI transfers */
- u8 irq_status;
- u16 rx_level;
- unsigned long flags;
-
- /* Read IRQ status register */
- buf[0] = MAX3107_IRQSTS_REG;
- /* Read status IRQ status register */
- buf[1] = MAX3107_STS_IRQSTS_REG;
- /* Read LSR IRQ status register */
- buf[2] = MAX3107_LSR_IRQSTS_REG;
- /* Query RX level */
- buf[3] = MAX3107_RXFIFOLVL_REG;
-
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
- dev_err(&s->spi->dev,
- "SPI transfer for INTR handling failed\n");
- return 0;
- }
-
- irq_status = (u8)buf[0];
- pr_debug("IRQSTS %x\n", irq_status);
- rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
-
- if (irq_status & MAX3107_IRQ_LSR_BIT) {
- /* LSR interrupt */
- if (buf[2] & MAX3107_LSR_RXTO_BIT)
- /* RX timeout interrupt,
- * handled by normal RX handling
- */
- pr_debug("RX TO INT\n");
- }
-
- if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
- /* Tx empty interrupt,
- * disable TX and set tx_fifo_empty flag
- */
- pr_debug("TE INT, disabling TX\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
- buf[0] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
- s->tx_enabled = 0;
- s->tx_fifo_empty = 1;
- }
-
- if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
- /* RX FIFO interrupt,
- * handled by normal RX handling
- */
- pr_debug("RFIFO INT\n");
-
- /* Return RX level */
- return rx_level;
-}
-
-/* Trigger work thread*/
-static void max3107_dowork(struct max3107_port *s)
-{
- if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
- queue_work(s->workqueue, &s->work);
- else
- dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
-}
-
-/* Work thread */
-static void max3107_work(struct work_struct *w)
-{
- struct max3107_port *s = container_of(w, struct max3107_port, work);
- u16 rxlvl = 0;
- int len; /* SPI transfer buffer length */
- u16 buf[5]; /* Buffer for SPI transfers */
- unsigned long flags;
-
- /* Start by reading current RX FIFO level */
- buf[0] = MAX3107_RXFIFOLVL_REG;
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
- rxlvl = 0;
- } else {
- rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
- }
-
- do {
- pr_debug("rxlvl %d\n", rxlvl);
-
- /* Handle RX */
- max3107_handlerx(s, rxlvl);
- rxlvl = 0;
-
- if (s->handle_irq) {
- /* Handle pending interrupts
- * We also get new RX FIFO level since new data may
- * have been received while pushing received data to
- * receivers
- */
- s->handle_irq = 0;
- rxlvl = handle_interrupt(s);
- }
-
- /* Handle TX */
- max3107_handletx(s);
-
- /* Handle configuration changes */
- len = 0;
- spin_lock_irqsave(&s->data_lock, flags);
- if (s->mode1_commit) {
- pr_debug("mode1_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- buf[len++] |= s->mode1_reg;
- s->mode1_commit = 0;
- }
- if (s->lcr_commit) {
- pr_debug("lcr_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
- buf[len++] |= s->lcr_reg;
- s->lcr_commit = 0;
- }
- if (s->brg_commit) {
- pr_debug("brg_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
- buf[len++] |= ((s->brg_cfg >> 16) &
- MAX3107_SPI_TX_DATA_MASK);
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
- buf[len++] |= ((s->brg_cfg >> 8) &
- MAX3107_SPI_TX_DATA_MASK);
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
- buf[len++] |= ((s->brg_cfg) & 0xff);
- s->brg_commit = 0;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- if (len > 0) {
- if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
- dev_err(&s->spi->dev,
- "SPI transfer config failed\n");
- }
-
- /* Reloop if interrupt handling indicated data in RX FIFO */
- } while (rxlvl);
-
-}
-
-/* Set sleep mode */
-static void max3107_set_sleep(struct max3107_port *s, int mode)
-{
- u16 buf[1]; /* Buffer for SPI transfer */
- unsigned long flags;
- pr_debug("enter, mode %d\n", mode);
-
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- switch (mode) {
- case MAX3107_DISABLE_FORCED_SLEEP:
- s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
- break;
- case MAX3107_ENABLE_FORCED_SLEEP:
- s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
- break;
- case MAX3107_DISABLE_AUTOSLEEP:
- s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
- break;
- case MAX3107_ENABLE_AUTOSLEEP:
- s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
- break;
- default:
- spin_unlock_irqrestore(&s->data_lock, flags);
- dev_warn(&s->spi->dev, "invalid sleep mode\n");
- return;
- }
- buf[0] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
-
- if (mode == MAX3107_DISABLE_AUTOSLEEP ||
- mode == MAX3107_DISABLE_FORCED_SLEEP)
- msleep(MAX3107_WAKEUP_DELAY);
-}
-
-/* Perform full register initialization */
-static void max3107_register_init(struct max3107_port *s)
-{
- u16 buf[11]; /* Buffer for SPI transfers */
-
- /* 1. Configure baud rate, 9600 as default */
- s->baud = 9600;
- /* the below is default*/
- if (s->ext_clk) {
- s->brg_cfg = MAX3107_BRG26_B9600;
- s->baud_tbl = (struct baud_table *)brg26_ext;
- } else {
- s->brg_cfg = MAX3107_BRG13_IB9600;
- s->baud_tbl = (struct baud_table *)brg13_int;
- }
-
- if (s->pdata->init)
- s->pdata->init(s);
-
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
- | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
- | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
- buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
- | ((s->brg_cfg) & 0xff);
-
- /* 2. Configure LCR register, 8N1 mode by default */
- s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
- buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
- | s->lcr_reg;
-
- /* 3. Configure MODE 1 register */
- s->mode1_reg = 0;
- /* Enable IRQ pin */
- s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
- /* Disable TX */
- s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
- s->tx_enabled = 0;
- /* RX is enabled */
- s->rx_enabled = 1;
- buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
- | s->mode1_reg;
-
- /* 4. Configure MODE 2 register */
- buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
- if (s->loopback) {
- /* Enable loopback */
- buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
- }
- /* Reset FIFOs */
- buf[5] |= MAX3107_MODE2_FIFORST_BIT;
- s->tx_fifo_empty = 1;
-
- /* 5. Configure FIFO trigger level register */
- buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
- /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
- buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
-
- /* 6. Configure flow control levels */
- buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
- /* Flow control halt level 96, resume level 48 */
- buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
-
- /* 7. Configure flow control */
- buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
- /* Enable auto CTS and auto RTS flow control */
- buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
-
- /* 8. Configure RX timeout register */
- buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
- /* Timeout after 48 character intervals */
- buf[9] |= 0x0030;
-
- /* 9. Configure LSR interrupt enable register */
- buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
- /* Enable RX timeout interrupt */
- buf[10] |= MAX3107_LSR_RXTO_BIT;
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 22))
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
- /* 10. Clear IRQ status register by reading it */
- buf[0] = MAX3107_IRQSTS_REG;
-
- /* 11. Configure interrupt enable register */
- /* Enable LSR interrupt */
- s->irqen_reg = MAX3107_IRQ_LSR_BIT;
- /* Enable RX FIFO interrupt */
- s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
- | s->irqen_reg;
-
- /* 12. Clear FIFO reset that was set in step 6 */
- buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
- if (s->loopback) {
- /* Keep loopback enabled */
- buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
- }
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
-}
-
-/* IRQ handler */
-static irqreturn_t max3107_irq(int irqno, void *dev_id)
-{
- struct max3107_port *s = dev_id;
-
- if (irqno != s->spi->irq) {
- /* Unexpected IRQ */
- return IRQ_NONE;
- }
-
- /* Indicate irq */
- s->handle_irq = 1;
-
- /* Trigger work thread */
- max3107_dowork(s);
-
- return IRQ_HANDLED;
-}
-
-/* HW suspension function
- *
- * Currently autosleep is used to decrease current consumption, alternative
- * approach would be to set the chip to reset mode if UART is not being
- * used but that would mess the GPIOs
- *
- */
-void max3107_hw_susp(struct max3107_port *s, int suspend)
-{
- pr_debug("enter, suspend %d\n", suspend);
-
- if (suspend) {
- /* Suspend requested,
- * enable autosleep to decrease current consumption
- */
- s->suspended = 1;
- max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
- } else {
- /* Resume requested,
- * disable autosleep
- */
- s->suspended = 0;
- max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
- }
-}
-EXPORT_SYMBOL_GPL(max3107_hw_susp);
-
-/* Modem status IRQ enabling */
-static void max3107_enable_ms(struct uart_port *port)
-{
- /* Modem status not supported */
-}
-
-/* Data send function */
-static void max3107_start_tx(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- /* Trigger work thread for sending data */
- max3107_dowork(s);
-}
-
-/* Function for checking that there is no pending transfers */
-static unsigned int max3107_tx_empty(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- pr_debug("returning %d\n",
- (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
- return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
-}
-
-/* Function for stopping RX */
-static void max3107_stop_rx(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- unsigned long flags;
-
- /* Set RX disabled in MODE 1 register */
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
- s->mode1_commit = 1;
- spin_unlock_irqrestore(&s->data_lock, flags);
- /* Set RX disabled */
- s->rx_enabled = 0;
- /* Trigger work thread for doing the actual configuration change */
- max3107_dowork(s);
-}
-
-/* Function for returning control pin states */
-static unsigned int max3107_get_mctrl(struct uart_port *port)
-{
- /* DCD and DSR are not wired and CTS/RTS is handled automatically
- * so just indicate DSR and CAR asserted
- */
- return TIOCM_DSR | TIOCM_CAR;
-}
-
-/* Function for setting control pin states */
-static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
- * so do nothing
- */
-}
-
-/* Function for configuring UART parameters */
-static void max3107_set_termios(struct uart_port *port,
- struct ktermios *termios,
- struct ktermios *old)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- struct tty_struct *tty;
- int baud;
- u16 new_lcr = 0;
- u32 new_brg = 0;
- unsigned long flags;
-
- if (!port->state)
- return;
-
- tty = port->state->port.tty;
- if (!tty)
- return;
-
- /* Get new LCR register values */
- /* Word size */
- if ((termios->c_cflag & CSIZE) == CS7)
- new_lcr |= MAX3107_LCR_WORD_LEN_7;
- else
- new_lcr |= MAX3107_LCR_WORD_LEN_8;
-
- /* Parity */
- if (termios->c_cflag & PARENB) {
- new_lcr |= MAX3107_LCR_PARITY_BIT;
- if (!(termios->c_cflag & PARODD))
- new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
- }
-
- /* Stop bits */
- if (termios->c_cflag & CSTOPB) {
- /* 2 stop bits */
- new_lcr |= MAX3107_LCR_STOPLEN_BIT;
- }
-
- /* Mask termios capabilities we don't support */
- termios->c_cflag &= ~CMSPAR;
-
- /* Set status ignore mask */
- s->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
-
- /* Set low latency to immediately handle pushed data */
- s->port.state->port.tty->low_latency = 1;
-
- /* Get new baud rate generator configuration */
- baud = tty_get_baud_rate(tty);
-
- spin_lock_irqsave(&s->data_lock, flags);
- new_brg = get_new_brg(baud, s);
- /* if can't find the corrent config, use previous */
- if (!new_brg) {
- baud = s->baud;
- new_brg = s->brg_cfg;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
- tty_termios_encode_baud_rate(termios, baud, baud);
- s->baud = baud;
-
- /* Update timeout according to new baud rate */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- spin_lock_irqsave(&s->data_lock, flags);
- if (s->lcr_reg != new_lcr) {
- s->lcr_reg = new_lcr;
- s->lcr_commit = 1;
- }
- if (s->brg_cfg != new_brg) {
- s->brg_cfg = new_brg;
- s->brg_commit = 1;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- /* Trigger work thread for doing the actual configuration change */
- max3107_dowork(s);
-}
-
-/* Port shutdown function */
-static void max3107_shutdown(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- if (s->suspended && s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Free the interrupt */
- free_irq(s->spi->irq, s);
-
- if (s->workqueue) {
- /* Flush and destroy work queue */
- flush_workqueue(s->workqueue);
- destroy_workqueue(s->workqueue);
- s->workqueue = NULL;
- }
-
- /* Suspend HW */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 1);
-}
-
-/* Port startup function */
-static int max3107_startup(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- /* Initialize work queue */
- s->workqueue = create_freezable_workqueue("max3107");
- if (!s->workqueue) {
- dev_err(&s->spi->dev, "Workqueue creation failed\n");
- return -EBUSY;
- }
- INIT_WORK(&s->work, max3107_work);
-
- /* Setup IRQ */
- if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
- "max3107", s)) {
- dev_err(&s->spi->dev, "IRQ reguest failed\n");
- destroy_workqueue(s->workqueue);
- s->workqueue = NULL;
- return -EBUSY;
- }
-
- /* Resume HW */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Init registers */
- max3107_register_init(s);
-
- return 0;
-}
-
-/* Port type function */
-static const char *max3107_type(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- return s->spi->modalias;
-}
-
-/* Port release function */
-static void max3107_release_port(struct uart_port *port)
-{
- /* Do nothing */
-}
-
-/* Port request function */
-static int max3107_request_port(struct uart_port *port)
-{
- /* Do nothing */
- return 0;
-}
-
-/* Port config function */
-static void max3107_config_port(struct uart_port *port, int flags)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- s->port.type = PORT_MAX3107;
-}
-
-/* Port verify function */
-static int max3107_verify_port(struct uart_port *port,
- struct serial_struct *ser)
-{
- if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
- return 0;
-
- return -EINVAL;
-}
-
-/* Port stop TX function */
-static void max3107_stop_tx(struct uart_port *port)
-{
- /* Do nothing */
-}
-
-/* Port break control function */
-static void max3107_break_ctl(struct uart_port *port, int break_state)
-{
- /* We don't support break control, do nothing */
-}
-
-
-/* Port functions */
-static struct uart_ops max3107_ops = {
- .tx_empty = max3107_tx_empty,
- .set_mctrl = max3107_set_mctrl,
- .get_mctrl = max3107_get_mctrl,
- .stop_tx = max3107_stop_tx,
- .start_tx = max3107_start_tx,
- .stop_rx = max3107_stop_rx,
- .enable_ms = max3107_enable_ms,
- .break_ctl = max3107_break_ctl,
- .startup = max3107_startup,
- .shutdown = max3107_shutdown,
- .set_termios = max3107_set_termios,
- .type = max3107_type,
- .release_port = max3107_release_port,
- .request_port = max3107_request_port,
- .config_port = max3107_config_port,
- .verify_port = max3107_verify_port,
-};
-
-/* UART driver data */
-static struct uart_driver max3107_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = "ttyMAX",
- .dev_name = "ttyMAX",
- .nr = 1,
-};
-
-static int driver_registered = 0;
-
-
-
-/* 'Generic' platform data */
-static struct max3107_plat generic_plat_data = {
- .loopback = 0,
- .ext_clk = 1,
- .hw_suspend = max3107_hw_susp,
- .polled_mode = 0,
- .poll_time = 0,
-};
-
-
-/*******************************************************************/
-
-/**
- * max3107_probe - SPI bus probe entry point
- * @spi: the spi device
- *
- * SPI wants us to probe this device and if appropriate claim it.
- * Perform any platform specific requirements and then initialise
- * the device.
- */
-
-int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
-{
- struct max3107_port *s;
- u16 buf[2]; /* Buffer for SPI transfers */
- int retval;
-
- pr_info("enter max3107 probe\n");
-
- /* Allocate port structure */
- s = kzalloc(sizeof(*s), GFP_KERNEL);
- if (!s) {
- pr_err("Allocating port structure failed\n");
- return -ENOMEM;
- }
-
- s->pdata = pdata;
-
- /* SPI Rx buffer
- * +2 for RX FIFO interrupt
- * disabling and RX level query
- */
- s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
- if (!s->rxbuf) {
- pr_err("Allocating RX buffer failed\n");
- retval = -ENOMEM;
- goto err_free4;
- }
- s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
- if (!s->rxstr) {
- pr_err("Allocating RX buffer failed\n");
- retval = -ENOMEM;
- goto err_free3;
- }
- /* SPI Tx buffer
- * SPI transfer buffer
- * +3 for TX FIFO empty
- * interrupt disabling and
- * enabling and TX enabling
- */
- s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
- if (!s->txbuf) {
- pr_err("Allocating TX buffer failed\n");
- retval = -ENOMEM;
- goto err_free2;
- }
- /* Initialize shared data lock */
- spin_lock_init(&s->data_lock);
-
- /* SPI intializations */
- dev_set_drvdata(&spi->dev, s);
- spi->mode = SPI_MODE_0;
- spi->dev.platform_data = pdata;
- spi->bits_per_word = 16;
- s->ext_clk = pdata->ext_clk;
- s->loopback = pdata->loopback;
- spi_setup(spi);
- s->spi = spi;
-
- /* Check REV ID to ensure we are talking to what we expect */
- buf[0] = MAX3107_REVID_REG;
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
- retval = -EIO;
- goto err_free1;
- }
- if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
- (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
- dev_err(&s->spi->dev, "REVID %x does not match\n",
- (buf[0] & MAX3107_SPI_RX_DATA_MASK));
- retval = -ENODEV;
- goto err_free1;
- }
-
- /* Disable all interrupts */
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
- buf[0] |= 0x0000;
-
- /* Configure clock source */
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
- if (s->ext_clk) {
- /* External clock */
- buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
- }
-
- /* PLL bypass ON */
- buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
- retval = -EIO;
- goto err_free1;
- }
-
- /* Register UART driver */
- if (!driver_registered) {
- retval = uart_register_driver(&max3107_uart_driver);
- if (retval) {
- dev_err(&s->spi->dev, "Registering UART driver failed\n");
- goto err_free1;
- }
- driver_registered = 1;
- }
-
- /* Initialize UART port data */
- s->port.fifosize = 128;
- s->port.ops = &max3107_ops;
- s->port.line = 0;
- s->port.dev = &spi->dev;
- s->port.uartclk = 9600;
- s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
- s->port.irq = s->spi->irq;
- s->port.type = PORT_MAX3107;
-
- /* Add UART port */
- retval = uart_add_one_port(&max3107_uart_driver, &s->port);
- if (retval < 0) {
- dev_err(&s->spi->dev, "Adding UART port failed\n");
- goto err_free1;
- }
-
- if (pdata->configure) {
- retval = pdata->configure(s);
- if (retval < 0)
- goto err_free1;
- }
-
- /* Go to suspend mode */
- if (pdata->hw_suspend)
- pdata->hw_suspend(s, 1);
-
- return 0;
-
-err_free1:
- kfree(s->txbuf);
-err_free2:
- kfree(s->rxstr);
-err_free3:
- kfree(s->rxbuf);
-err_free4:
- kfree(s);
- return retval;
-}
-EXPORT_SYMBOL_GPL(max3107_probe);
-
-/* Driver remove function */
-int max3107_remove(struct spi_device *spi)
-{
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_info("enter max3107 remove\n");
-
- /* Remove port */
- if (uart_remove_one_port(&max3107_uart_driver, &s->port))
- dev_warn(&s->spi->dev, "Removing UART port failed\n");
-
-
- /* Free TxRx buffer */
- kfree(s->rxbuf);
- kfree(s->rxstr);
- kfree(s->txbuf);
-
- /* Free port structure */
- kfree(s);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_remove);
-
-/* Driver suspend function */
-int max3107_suspend(struct spi_device *spi, pm_message_t state)
-{
-#ifdef CONFIG_PM
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_debug("enter suspend\n");
-
- /* Suspend UART port */
- uart_suspend_port(&max3107_uart_driver, &s->port);
-
- /* Go to suspend mode */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 1);
-#endif /* CONFIG_PM */
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_suspend);
-
-/* Driver resume function */
-int max3107_resume(struct spi_device *spi)
-{
-#ifdef CONFIG_PM
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_debug("enter resume\n");
-
- /* Resume from suspend */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Resume UART port */
- uart_resume_port(&max3107_uart_driver, &s->port);
-#endif /* CONFIG_PM */
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_resume);
-
-static int max3107_probe_generic(struct spi_device *spi)
-{
- return max3107_probe(spi, &generic_plat_data);
-}
-
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
- .driver = {
- .name = "max3107",
- .owner = THIS_MODULE,
- },
- .probe = max3107_probe_generic,
- .remove = __devexit_p(max3107_remove),
- .suspend = max3107_suspend,
- .resume = max3107_resume,
-};
-
-/* Driver init function */
-static int __init max3107_init(void)
-{
- pr_info("enter max3107 init\n");
- return spi_register_driver(&max3107_driver);
-}
-
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
- pr_info("enter max3107 exit\n");
- /* Unregister UART driver */
- if (driver_registered)
- uart_unregister_driver(&max3107_uart_driver);
- spi_unregister_driver(&max3107_driver);
-}
-
-module_init(max3107_init);
-module_exit(max3107_exit);
-
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:max3107");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-/*
- * max3107.h - spi uart protocol driver header for Maxim 3107
- *
- * Copyright (C) Aavamobile 2009
- * Based on serial_max3100.h by Christian Pellegrin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _MAX3107_H
-#define _MAX3107_H
-
-/* Serial error status definitions */
-#define MAX3107_PARITY_ERROR 1
-#define MAX3107_FRAME_ERROR 2
-#define MAX3107_OVERRUN_ERROR 4
-#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \
- MAX3107_FRAME_ERROR | \
- MAX3107_OVERRUN_ERROR)
-
-/* GPIO definitions */
-#define MAX3107_GPIO_BASE 88
-#define MAX3107_GPIO_COUNT 4
-
-
-/* GPIO connected to chip's reset pin */
-#define MAX3107_RESET_GPIO 87
-
-
-/* Chip reset delay */
-#define MAX3107_RESET_DELAY 10
-
-/* Chip wakeup delay */
-#define MAX3107_WAKEUP_DELAY 50
-
-
-/* Sleep mode definitions */
-#define MAX3107_DISABLE_FORCED_SLEEP 0
-#define MAX3107_ENABLE_FORCED_SLEEP 1
-#define MAX3107_DISABLE_AUTOSLEEP 2
-#define MAX3107_ENABLE_AUTOSLEEP 3
-
-
-/* Definitions for register access with SPI transfers
- *
- * SPI transfer format:
- *
- * Master to slave bits xzzzzzzzyyyyyyyy
- * Slave to master bits aaaaaaaabbbbbbbb
- *
- * where:
- * x = 0 for reads, 1 for writes
- * z = register address
- * y = new register value if write, 0 if read
- * a = unspecified
- * b = register value if read, unspecified if write
- */
-
-/* SPI speed */
-#define MAX3107_SPI_SPEED (3125000 * 2)
-
-/* Write bit */
-#define MAX3107_WRITE_BIT (1 << 15)
-
-/* SPI TX data mask */
-#define MAX3107_SPI_RX_DATA_MASK (0x00ff)
-
-/* SPI RX data mask */
-#define MAX3107_SPI_TX_DATA_MASK (0x00ff)
-
-/* Register access masks */
-#define MAX3107_RHR_REG (0x0000) /* RX FIFO */
-#define MAX3107_THR_REG (0x0000) /* TX FIFO */
-#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */
-#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */
-#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */
-#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */
-#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */
-#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */
-#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */
-#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */
-#define MAX3107_MODE1_REG (0x0900) /* MODE1 */
-#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */
-#define MAX3107_LCR_REG (0x0b00) /* LCR */
-#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */
-#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */
-#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */
-#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */
-#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */
-#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */
-#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */
-#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */
-#define MAX3107_XON1_REG (0x1400) /* XON1 character */
-#define MAX3107_XON2_REG (0x1500) /* XON2 character */
-#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */
-#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */
-#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */
-#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */
-#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */
-#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */
-#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */
-#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */
-#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */
-#define MAX3107_REVID_REG (0x1f00) /* Revision identification */
-
-/* IRQ register bits */
-#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
-#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
-#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */
-#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
-#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
-#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
-#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
-#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
-
-/* LSR register bits */
-#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */
-#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
-#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
-#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */
-#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */
-#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
-#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */
-
-/* Special character register bits */
-#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
-#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
-#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
-#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
-#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */
-#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
-#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Status register bits */
-#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
-#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
-#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
-#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
-#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */
-#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
-#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
-#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* MODE1 register bits */
-#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
-#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
-#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
-#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
-#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
-#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
-#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
-#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
-
-/* MODE2 register bits */
-#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */
-#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
-#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
-#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
-#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
-#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
-#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
-#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
-
-/* LCR register bits */
-#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
-#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
- *
- * Word length bits table:
- * 00 -> 5 bit words
- * 01 -> 6 bit words
- * 10 -> 7 bit words
- * 11 -> 8 bit words
- */
-#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
- *
- * STOP length bit table:
- * 0 -> 1 stop bit
- * 1 -> 1-1.5 stop bits if
- * word length is 5,
- * 2 stop bits otherwise
- */
-#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
-#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
-#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
-#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
-#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */
-#define MAX3107_LCR_WORD_LEN_5 (0x0000)
-#define MAX3107_LCR_WORD_LEN_6 (0x0001)
-#define MAX3107_LCR_WORD_LEN_7 (0x0002)
-#define MAX3107_LCR_WORD_LEN_8 (0x0003)
-
-
-/* IRDA register bits */
-#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
-#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
-#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
-#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
-#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
-#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
-#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Flow control trigger level register masks */
-#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
-#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
-#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f)
-#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4)
-
-/* FIFO interrupt trigger level register masks */
-#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f)
-#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4)
-
-/* Flow control register bits */
-#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
- * are used in conjunction with
- * XOFF2 for definition of
- * special character */
-#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
-#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
-#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
- *
- * SWFLOW bits 1 & 0 table:
- * 00 -> no transmitter flow
- * control
- * 01 -> receiver compares
- * XON2 and XOFF2
- * and controls
- * transmitter
- * 10 -> receiver compares
- * XON1 and XOFF1
- * and controls
- * transmitter
- * 11 -> receiver compares
- * XON1, XON2, XOFF1 and
- * XOFF2 and controls
- * transmitter
- */
-#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
-#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
- *
- * SWFLOW bits 3 & 2 table:
- * 00 -> no received flow
- * control
- * 01 -> transmitter generates
- * XON2 and XOFF2
- * 10 -> transmitter generates
- * XON1 and XOFF1
- * 11 -> transmitter generates
- * XON1, XON2, XOFF1 and
- * XOFF2
- */
-
-/* GPIO configuration register bits */
-#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
-#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
-#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
-#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
-#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
-#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
-#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
-#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
-
-/* GPIO DATA register bits */
-#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
-#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
-#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
-#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
-#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
-#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
-#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
-#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
-
-/* PLL configuration register masks */
-#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */
-#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */
-
-/* Baud rate generator configuration register masks and bits */
-#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of
- * Baud rate generator divisor
- */
-#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
-#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
-#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Clock source register bits */
-#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */
-#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
-#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
-#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
-#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
-#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */
-#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
-
-
-/* HW definitions */
-#define MAX3107_RX_FIFO_SIZE 128
-#define MAX3107_TX_FIFO_SIZE 128
-#define MAX3107_REVID1 0x00a0
-#define MAX3107_REVID2 0x00a1
-
-
-/* Baud rate generator configuration values for external clock 13MHz */
-#define MAX3107_BRG13_B300 (0x0A9400 | 0x05)
-#define MAX3107_BRG13_B600 (0x054A00 | 0x03)
-#define MAX3107_BRG13_B1200 (0x02A500 | 0x01)
-#define MAX3107_BRG13_B2400 (0x015200 | 0x09)
-#define MAX3107_BRG13_B4800 (0x00A900 | 0x04)
-#define MAX3107_BRG13_B9600 (0x005400 | 0x0A)
-#define MAX3107_BRG13_B19200 (0x002A00 | 0x05)
-#define MAX3107_BRG13_B38400 (0x001500 | 0x03)
-#define MAX3107_BRG13_B57600 (0x000E00 | 0x02)
-#define MAX3107_BRG13_B115200 (0x000700 | 0x01)
-#define MAX3107_BRG13_B230400 (0x000300 | 0x08)
-#define MAX3107_BRG13_B460800 (0x000100 | 0x0c)
-#define MAX3107_BRG13_B921600 (0x000100 | 0x1c)
-
-/* Baud rate generator configuration values for external clock 26MHz */
-#define MAX3107_BRG26_B300 (0x152800 | 0x0A)
-#define MAX3107_BRG26_B600 (0x0A9400 | 0x05)
-#define MAX3107_BRG26_B1200 (0x054A00 | 0x03)
-#define MAX3107_BRG26_B2400 (0x02A500 | 0x01)
-#define MAX3107_BRG26_B4800 (0x015200 | 0x09)
-#define MAX3107_BRG26_B9600 (0x00A900 | 0x04)
-#define MAX3107_BRG26_B19200 (0x005400 | 0x0A)
-#define MAX3107_BRG26_B38400 (0x002A00 | 0x05)
-#define MAX3107_BRG26_B57600 (0x001C00 | 0x03)
-#define MAX3107_BRG26_B115200 (0x000E00 | 0x02)
-#define MAX3107_BRG26_B230400 (0x000700 | 0x01)
-#define MAX3107_BRG26_B460800 (0x000300 | 0x08)
-#define MAX3107_BRG26_B921600 (0x000100 | 0x0C)
-
-/* Baud rate generator configuration values for internal clock */
-#define MAX3107_BRG13_IB300 (0x008000 | 0x00)
-#define MAX3107_BRG13_IB600 (0x004000 | 0x00)
-#define MAX3107_BRG13_IB1200 (0x002000 | 0x00)
-#define MAX3107_BRG13_IB2400 (0x001000 | 0x00)
-#define MAX3107_BRG13_IB4800 (0x000800 | 0x00)
-#define MAX3107_BRG13_IB9600 (0x000400 | 0x00)
-#define MAX3107_BRG13_IB19200 (0x000200 | 0x00)
-#define MAX3107_BRG13_IB38400 (0x000100 | 0x00)
-#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B)
-#define MAX3107_BRG13_IB115200 (0x000000 | 0x05)
-#define MAX3107_BRG13_IB230400 (0x000000 | 0x03)
-#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
-#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
-
-
-struct baud_table {
- int baud;
- u32 new_brg;
-};
-
-struct max3107_port {
- /* UART port structure */
- struct uart_port port;
-
- /* SPI device structure */
- struct spi_device *spi;
-
-#if defined(CONFIG_GPIOLIB)
- /* GPIO chip structure */
- struct gpio_chip chip;
-#endif
-
- /* Workqueue that does all the magic */
- struct workqueue_struct *workqueue;
- struct work_struct work;
-
- /* Lock for shared data */
- spinlock_t data_lock;
-
- /* Device configuration */
- int ext_clk; /* 1 if external clock used */
- int loopback; /* Current loopback mode state */
- int baud; /* Current baud rate */
-
- /* State flags */
- int suspended; /* Indicates suspend mode */
- int tx_fifo_empty; /* Flag for TX FIFO state */
- int rx_enabled; /* Flag for receiver state */
- int tx_enabled; /* Flag for transmitter state */
-
- u16 irqen_reg; /* Current IRQ enable register value */
- /* Shared data */
- u16 mode1_reg; /* Current mode1 register value*/
- int mode1_commit; /* Flag for setting new mode1 register value */
- u16 lcr_reg; /* Current LCR register value */
- int lcr_commit; /* Flag for setting new LCR register value */
- u32 brg_cfg; /* Current Baud rate generator config */
- int brg_commit; /* Flag for setting new baud rate generator
- * config
- */
- struct baud_table *baud_tbl;
- int handle_irq; /* Indicates that IRQ should be handled */
-
- /* Rx buffer and str*/
- u16 *rxbuf;
- u8 *rxstr;
- /* Tx buffer*/
- u16 *txbuf;
-
- struct max3107_plat *pdata; /* Platform data */
-};
-
-/* Platform data structure */
-struct max3107_plat {
- /* Loopback mode enable */
- int loopback;
- /* External clock enable */
- int ext_clk;
- /* Called during the register initialisation */
- void (*init)(struct max3107_port *s);
- /* Called when the port is found and configured */
- int (*configure)(struct max3107_port *s);
- /* HW suspend function */
- void (*hw_suspend) (struct max3107_port *s, int suspend);
- /* Polling mode enable */
- int polled_mode;
- /* Polling period if polling mode enabled */
- int poll_time;
-};
-
-extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
-extern void max3107_hw_susp(struct max3107_port *s, int suspend);
-extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
-extern int max3107_remove(struct spi_device *spi);
-extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
-extern int max3107_resume(struct spi_device *spi);
-
-#endif /* _LINUX_SERIAL_MAX3107_H */
--- /dev/null
+/*
+ * Maxim (Dallas) MAX3107/8 serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ * Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ * Based on max3107.c, by Aavamobile
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* TODO: MAX3109 support (Dual) */
+/* TODO: MAX14830 support (Quad) */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/max310x.h>
+
+#define MAX310X_MAJOR 204
+#define MAX310X_MINOR 209
+
+/* MAX310X register definitions */
+#define MAX310X_RHR_REG (0x00) /* RX FIFO */
+#define MAX310X_THR_REG (0x00) /* TX FIFO */
+#define MAX310X_IRQEN_REG (0x01) /* IRQ enable */
+#define MAX310X_IRQSTS_REG (0x02) /* IRQ status */
+#define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */
+#define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */
+#define MAX310X_SPCHR_IRQEN_REG (0x05) /* Special char IRQ enable */
+#define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */
+#define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */
+#define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */
+#define MAX310X_MODE1_REG (0x09) /* MODE1 */
+#define MAX310X_MODE2_REG (0x0a) /* MODE2 */
+#define MAX310X_LCR_REG (0x0b) /* LCR */
+#define MAX310X_RXTO_REG (0x0c) /* RX timeout */
+#define MAX310X_HDPIXDELAY_REG (0x0d) /* Auto transceiver delays */
+#define MAX310X_IRDA_REG (0x0e) /* IRDA settings */
+#define MAX310X_FLOWLVL_REG (0x0f) /* Flow control levels */
+#define MAX310X_FIFOTRIGLVL_REG (0x10) /* FIFO IRQ trigger levels */
+#define MAX310X_TXFIFOLVL_REG (0x11) /* TX FIFO level */
+#define MAX310X_RXFIFOLVL_REG (0x12) /* RX FIFO level */
+#define MAX310X_FLOWCTRL_REG (0x13) /* Flow control */
+#define MAX310X_XON1_REG (0x14) /* XON1 character */
+#define MAX310X_XON2_REG (0x15) /* XON2 character */
+#define MAX310X_XOFF1_REG (0x16) /* XOFF1 character */
+#define MAX310X_XOFF2_REG (0x17) /* XOFF2 character */
+#define MAX310X_GPIOCFG_REG (0x18) /* GPIO config */
+#define MAX310X_GPIODATA_REG (0x19) /* GPIO data */
+#define MAX310X_PLLCFG_REG (0x1a) /* PLL config */
+#define MAX310X_BRGCFG_REG (0x1b) /* Baud rate generator conf */
+#define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */
+#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */
+#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */
+/* Only present in MAX3107 */
+#define MAX3107_REVID_REG (0x1f) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
+#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
+#define MAX310X_IRQ_STS_BIT (1 << 2) /* Status interrupt */
+#define MAX310X_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
+#define MAX310X_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
+#define MAX310X_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
+#define MAX310X_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
+#define MAX310X_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX310X_LSR_RXTO_BIT (1 << 0) /* RX timeout */
+#define MAX310X_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
+#define MAX310X_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
+#define MAX310X_LSR_FRERR_BIT (1 << 3) /* Frame error */
+#define MAX310X_LSR_RXBRK_BIT (1 << 4) /* RX break */
+#define MAX310X_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
+#define MAX310X_LSR_CTS_BIT (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX310X_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
+#define MAX310X_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
+#define MAX310X_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
+#define MAX310X_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
+#define MAX310X_SPCHR_BREAK_BIT (1 << 4) /* RX break */
+#define MAX310X_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
+
+/* Status register bits */
+#define MAX310X_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
+#define MAX310X_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
+#define MAX310X_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
+#define MAX310X_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
+#define MAX310X_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
+#define MAX310X_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
+
+/* MODE1 register bits */
+#define MAX310X_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
+#define MAX310X_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
+#define MAX310X_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
+#define MAX310X_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
+#define MAX310X_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
+#define MAX310X_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
+#define MAX310X_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
+#define MAX310X_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX310X_MODE2_RST_BIT (1 << 0) /* Chip reset */
+#define MAX310X_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
+#define MAX310X_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
+#define MAX310X_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
+#define MAX310X_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
+#define MAX310X_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
+#define MAX310X_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
+#define MAX310X_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX310X_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define MAX310X_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define MAX310X_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define MAX310X_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define MAX310X_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define MAX310X_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define MAX310X_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define MAX310X_LCR_RTS_BIT (1 << 7) /* RTS pin control */
+#define MAX310X_LCR_WORD_LEN_5 (0x00)
+#define MAX310X_LCR_WORD_LEN_6 (0x01)
+#define MAX310X_LCR_WORD_LEN_7 (0x02)
+#define MAX310X_LCR_WORD_LEN_8 (0x03)
+
+/* IRDA register bits */
+#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
+#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
+#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
+#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
+#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
+#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
+
+/* Flow control trigger level register masks */
+#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
+#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f)
+#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f)
+#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4)
+
+/* Flow control register bits */
+#define MAX310X_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
+ * are used in conjunction with
+ * XOFF2 for definition of
+ * special character */
+#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
+#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
+ *
+ * SWFLOW bits 1 & 0 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * and controls
+ * transmitter
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * and controls
+ * transmitter
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2 and controls
+ * transmitter
+ */
+#define MAX310X_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
+#define MAX310X_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* GPIO configuration register bits */
+#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
+#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
+#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
+#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
+#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
+#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
+#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
+#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
+#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
+#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
+#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
+#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */
+#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register bits */
+#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
+#define MAX310X_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
+
+/* Clock source register bits */
+#define MAX310X_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
+#define MAX310X_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
+#define MAX310X_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
+#define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
+#define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
+
+/* Misc definitions */
+#define MAX310X_FIFO_SIZE (128)
+
+/* MAX3107 specific */
+#define MAX3107_REV_ID (0xa0)
+#define MAX3107_REV_MASK (0xfe)
+
+/* IRQ status bits definitions */
+#define MAX310X_IRQ_TX (MAX310X_IRQ_TXFIFO_BIT | \
+ MAX310X_IRQ_TXEMPTY_BIT)
+#define MAX310X_IRQ_RX (MAX310X_IRQ_RXFIFO_BIT | \
+ MAX310X_IRQ_RXEMPTY_BIT)
+
+/* Supported chip types */
+enum {
+ MAX310X_TYPE_MAX3107 = 3107,
+ MAX310X_TYPE_MAX3108 = 3108,
+};
+
+struct max310x_port {
+ struct uart_driver uart;
+ struct uart_port port;
+
+ const char *name;
+ int uartclk;
+
+ unsigned int nr_gpio;
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+#endif
+
+ struct regmap *regmap;
+ struct regmap_config regcfg;
+
+ struct workqueue_struct *wq;
+ struct work_struct tx_work;
+
+ struct mutex max310x_mutex;
+
+ struct max310x_pdata *pdata;
+};
+
+static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_LSR_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ case MAX310X_TXFIFOLVL_REG:
+ case MAX310X_RXFIFOLVL_REG:
+ case MAX3107_REVID_REG: /* Only available on MAX3107 */
+ return false;
+ default:
+ break;
+ }
+
+ return true;
+}
+
+static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_RHR_REG:
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_LSR_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ case MAX310X_TXFIFOLVL_REG:
+ case MAX310X_RXFIFOLVL_REG:
+ case MAX310X_GPIODATA_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static bool max310x_reg_precious(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_RHR_REG:
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static void max310x_set_baud(struct max310x_port *s, int baud)
+{
+ unsigned int mode = 0, div = s->uartclk / baud;
+
+ if (!(div / 16)) {
+ /* Mode x2 */
+ mode = MAX310X_BRGCFG_2XMODE_BIT;
+ div = (s->uartclk * 2) / baud;
+ }
+
+ if (!(div / 16)) {
+ /* Mode x4 */
+ mode = MAX310X_BRGCFG_4XMODE_BIT;
+ div = (s->uartclk * 4) / baud;
+ }
+
+ regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG,
+ ((div / 16) >> 8) & 0xff);
+ regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff);
+ regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode);
+}
+
+static void max310x_wait_pll(struct max310x_port *s)
+{
+ int tryes = 1000;
+
+ /* Wait for PLL only if crystal is used */
+ if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) {
+ unsigned int sts = 0;
+
+ while (tryes--) {
+ regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts);
+ if (sts & MAX310X_STS_CLKREADY_BIT)
+ break;
+ }
+ }
+}
+
+static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
+{
+ /* Use baudrate 115200 for calculate error */
+ long err = f % (115200 * 16);
+
+ if ((*besterr < 0) || (*besterr > err)) {
+ *besterr = err;
+ return 0;
+ }
+
+ return 1;
+}
+
+static int __devinit max310x_set_ref_clk(struct max310x_port *s)
+{
+ unsigned int div, clksrc, pllcfg = 0;
+ long besterr = -1;
+ unsigned long fdiv, fmul, bestfreq = s->pdata->frequency;
+
+ /* First, update error without PLL */
+ max310x_update_best_err(s->pdata->frequency, &besterr);
+
+ /* Try all possible PLL dividers */
+ for (div = 1; (div <= 63) && besterr; div++) {
+ fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div);
+
+ /* Try multiplier 6 */
+ fmul = fdiv * 6;
+ if ((fdiv >= 500000) && (fdiv <= 800000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (0 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 48 */
+ fmul = fdiv * 48;
+ if ((fdiv >= 850000) && (fdiv <= 1200000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (1 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 96 */
+ fmul = fdiv * 96;
+ if ((fdiv >= 425000) && (fdiv <= 1000000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (2 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 144 */
+ fmul = fdiv * 144;
+ if ((fdiv >= 390000) && (fdiv <= 667000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (3 << 6) | div;
+ bestfreq = fmul;
+ }
+ }
+
+ /* Configure clock source */
+ if (s->pdata->driver_flags & MAX310X_EXT_CLK)
+ clksrc = MAX310X_CLKSRC_EXTCLK_BIT;
+ else
+ clksrc = MAX310X_CLKSRC_CRYST_BIT;
+
+ /* Configure PLL */
+ if (pllcfg) {
+ clksrc |= MAX310X_CLKSRC_PLL_BIT;
+ regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg);
+ } else
+ clksrc |= MAX310X_CLKSRC_PLLBYP_BIT;
+
+ regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
+
+ if (pllcfg)
+ max310x_wait_pll(s);
+
+ dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq);
+
+ return (int)bestfreq;
+}
+
+static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen)
+{
+ unsigned int sts = 0, ch = 0, flag;
+ struct tty_struct *tty = tty_port_tty_get(&s->port.state->port);
+
+ if (!tty)
+ return;
+
+ if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) {
+ dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen);
+ /* Ensure sanity of RX level */
+ rxlen = MAX310X_FIFO_SIZE;
+ }
+
+ dev_dbg(s->port.dev, "RX Len = %u\n", rxlen);
+
+ while (rxlen--) {
+ regmap_read(s->regmap, MAX310X_RHR_REG, &ch);
+ regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts);
+
+ sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT |
+ MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT;
+
+ s->port.icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(sts)) {
+ if (sts & MAX310X_LSR_RXBRK_BIT) {
+ s->port.icount.brk++;
+ if (uart_handle_break(&s->port))
+ continue;
+ } else if (sts & MAX310X_LSR_RXPAR_BIT)
+ s->port.icount.parity++;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ s->port.icount.frame++;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ s->port.icount.overrun++;
+
+ sts &= s->port.read_status_mask;
+ if (sts & MAX310X_LSR_RXBRK_BIT)
+ flag = TTY_BREAK;
+ else if (sts & MAX310X_LSR_RXPAR_BIT)
+ flag = TTY_PARITY;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ flag = TTY_FRAME;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ flag = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(s->port, ch))
+ continue;
+
+ if (sts & s->port.ignore_status_mask)
+ continue;
+
+ uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT,
+ ch, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+}
+
+static void max310x_handle_tx(struct max310x_port *s)
+{
+ struct circ_buf *xmit = &s->port.state->xmit;
+ unsigned int txlen = 0, to_send;
+
+ if (unlikely(s->port.x_char)) {
+ regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char);
+ s->port.icount.tx++;
+ s->port.x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+ return;
+
+ /* Get length of data pending in circular buffer */
+ to_send = uart_circ_chars_pending(xmit);
+ if (likely(to_send)) {
+ /* Limit to size of TX FIFO */
+ regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen);
+ txlen = MAX310X_FIFO_SIZE - txlen;
+ to_send = (to_send > txlen) ? txlen : to_send;
+
+ dev_dbg(s->port.dev, "TX Len = %u\n", to_send);
+
+ /* Add data to send */
+ s->port.icount.tx += to_send;
+ while (to_send--) {
+ regmap_write(s->regmap, MAX310X_THR_REG,
+ xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ };
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+}
+
+static irqreturn_t max310x_ist(int irq, void *dev_id)
+{
+ struct max310x_port *s = (struct max310x_port *)dev_id;
+ unsigned int ists = 0, lsr = 0, rxlen = 0;
+
+ mutex_lock(&s->max310x_mutex);
+
+ for (;;) {
+ /* Read IRQ status & RX FIFO level */
+ regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists);
+ regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr);
+ regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen);
+ if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen)
+ break;
+
+ dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists);
+
+ if (rxlen)
+ max310x_handle_rx(s, rxlen);
+ if (ists & MAX310X_IRQ_TX)
+ max310x_handle_tx(s);
+ if (ists & MAX310X_IRQ_CTS_BIT)
+ uart_handle_cts_change(&s->port,
+ !!(lsr & MAX310X_LSR_CTS_BIT));
+ }
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void max310x_wq_proc(struct work_struct *ws)
+{
+ struct max310x_port *s = container_of(ws, struct max310x_port, tx_work);
+
+ mutex_lock(&s->max310x_mutex);
+ max310x_handle_tx(s);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_start_tx(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ queue_work(s->wq, &s->tx_work);
+}
+
+static void max310x_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void max310x_stop_rx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static unsigned int max310x_tx_empty(struct uart_port *port)
+{
+ unsigned int val = 0;
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val);
+ mutex_unlock(&s->max310x_mutex);
+
+ return val ? 0 : TIOCSER_TEMT;
+}
+
+static void max310x_enable_ms(struct uart_port *port)
+{
+ /* Modem status not supported */
+}
+
+static unsigned int max310x_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+ * so do nothing
+ */
+}
+
+static void max310x_break_ctl(struct uart_port *port, int break_state)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_update_bits(s->regmap, MAX310X_LCR_REG,
+ MAX310X_LCR_TXBREAK_BIT,
+ break_state ? MAX310X_LCR_TXBREAK_BIT : 0);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+ unsigned int lcr, flow = 0;
+ int baud;
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~IXANY;
+
+ /* Word size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = MAX310X_LCR_WORD_LEN_5;
+ break;
+ case CS6:
+ lcr = MAX310X_LCR_WORD_LEN_6;
+ break;
+ case CS7:
+ lcr = MAX310X_LCR_WORD_LEN_7;
+ break;
+ case CS8:
+ default:
+ lcr = MAX310X_LCR_WORD_LEN_8;
+ break;
+ }
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ lcr |= MAX310X_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= MAX310X_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */
+
+ /* Update LCR register */
+ regmap_write(s->regmap, MAX310X_LCR_REG, lcr);
+
+ /* Set read status mask */
+ port->read_status_mask = MAX310X_LSR_RXOVR_BIT;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= MAX310X_LSR_RXPAR_BIT |
+ MAX310X_LSR_FRERR_BIT;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= MAX310X_LSR_RXBRK_BIT;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNBRK)
+ port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT |
+ MAX310X_LSR_RXOVR_BIT |
+ MAX310X_LSR_FRERR_BIT |
+ MAX310X_LSR_RXBRK_BIT;
+
+ /* Configure flow control */
+ regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]);
+ regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]);
+ if (termios->c_cflag & CRTSCTS)
+ flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT |
+ MAX310X_FLOWCTRL_AUTORTS_BIT;
+ if (termios->c_iflag & IXON)
+ flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT |
+ MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+ if (termios->c_iflag & IXOFF)
+ flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT |
+ MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+ regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow);
+
+ /* Get baud rate generator configuration */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 4);
+
+ /* Setup baudrate generator */
+ max310x_set_baud(s, baud);
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_startup(struct uart_port *port)
+{
+ unsigned int val, line = port->line;
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(0);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Configure baud rate, 9600 as default */
+ max310x_set_baud(s, 9600);
+
+ /* Configure LCR register, 8N1 mode by default */
+ val = MAX310X_LCR_WORD_LEN_8;
+ regmap_write(s->regmap, MAX310X_LCR_REG, val);
+
+ /* Configure MODE1 register */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_TRNSCVCTRL_BIT,
+ (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL)
+ ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0);
+
+ /* Configure MODE2 register */
+ val = MAX310X_MODE2_RXEMPTINV_BIT;
+ if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK)
+ val |= MAX310X_MODE2_LOOPBACK_BIT;
+ if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS)
+ val |= MAX310X_MODE2_ECHOSUPR_BIT;
+
+ /* Reset FIFOs */
+ val |= MAX310X_MODE2_FIFORST_BIT;
+ regmap_write(s->regmap, MAX310X_MODE2_REG, val);
+
+ /* Configure FIFO trigger level register */
+ /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */
+ val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64);
+ regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val);
+
+ /* Configure flow control levels */
+ /* Flow control halt level 96, resume level 48 */
+ val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96);
+ regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val);
+
+ /* Clear timeout register */
+ regmap_write(s->regmap, MAX310X_RXTO_REG, 0);
+
+ /* Configure LSR interrupt enable register */
+ /* Enable RX timeout interrupt */
+ val = MAX310X_LSR_RXTO_BIT;
+ regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val);
+
+ /* Clear FIFO reset */
+ regmap_update_bits(s->regmap, MAX310X_MODE2_REG,
+ MAX310X_MODE2_FIFORST_BIT, 0);
+
+ /* Clear IRQ status register by reading it */
+ regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val);
+
+ /* Configure interrupt enable register */
+ /* Enable CTS change interrupt */
+ val = MAX310X_IRQ_CTS_BIT;
+ /* Enable RX, TX interrupts */
+ val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX;
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, val);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+
+static void max310x_shutdown(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ /* Disable all interrupts */
+ mutex_lock(&s->max310x_mutex);
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+ mutex_unlock(&s->max310x_mutex);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+}
+
+static const char *max310x_type(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ return (port->type == PORT_MAX310X) ? s->name : NULL;
+}
+
+static int max310x_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+static void max310x_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void max310x_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_MAX310X;
+}
+
+static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X))
+ return 0;
+ if (ser->irq == port->irq)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct uart_ops max310x_ops = {
+ .tx_empty = max310x_tx_empty,
+ .set_mctrl = max310x_set_mctrl,
+ .get_mctrl = max310x_get_mctrl,
+ .stop_tx = max310x_stop_tx,
+ .start_tx = max310x_start_tx,
+ .stop_rx = max310x_stop_rx,
+ .enable_ms = max310x_enable_ms,
+ .break_ctl = max310x_break_ctl,
+ .startup = max310x_startup,
+ .shutdown = max310x_shutdown,
+ .set_termios = max310x_set_termios,
+ .type = max310x_type,
+ .request_port = max310x_request_port,
+ .release_port = max310x_release_port,
+ .config_port = max310x_config_port,
+ .verify_port = max310x_verify_port,
+};
+
+static int max310x_suspend(struct spi_device *spi, pm_message_t state)
+{
+ int ret;
+ struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "Suspend\n");
+
+ ret = uart_suspend_port(&s->uart, &s->port);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Enable sleep mode */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_FORCESLEEP_BIT,
+ MAX310X_MODE1_FORCESLEEP_BIT);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+
+ return ret;
+}
+
+static int max310x_resume(struct spi_device *spi)
+{
+ struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "Resume\n");
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(0);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Disable sleep mode */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_FORCESLEEP_BIT,
+ 0);
+
+ max310x_wait_pll(s);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return uart_resume_port(&s->uart, &s->port);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned int val = 0;
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val);
+ mutex_unlock(&s->max310x_mutex);
+
+ return !!((val >> 4) & (1 << offset));
+}
+
+static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+ 1 << offset : 0);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+
+ regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+
+static int max310x_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+
+ regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset,
+ 1 << offset);
+ regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+ 1 << offset : 0);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+#endif
+
+/* Generic platform data */
+static struct max310x_pdata generic_plat_data = {
+ .driver_flags = MAX310X_EXT_CLK,
+ .uart_flags[0] = MAX310X_ECHO_SUPRESS,
+ .frequency = 26000000,
+};
+
+static int __devinit max310x_probe(struct spi_device *spi)
+{
+ struct max310x_port *s;
+ struct device *dev = &spi->dev;
+ int chiptype = spi_get_device_id(spi)->driver_data;
+ struct max310x_pdata *pdata = dev->platform_data;
+ unsigned int val = 0;
+ int ret;
+
+ /* Check for IRQ */
+ if (spi->irq <= 0) {
+ dev_err(dev, "No IRQ specified\n");
+ return -ENOTSUPP;
+ }
+
+ /* Alloc port structure */
+ s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(dev, s);
+
+ if (!pdata) {
+ dev_warn(dev, "No platform data supplied, using defaults\n");
+ pdata = &generic_plat_data;
+ }
+ s->pdata = pdata;
+
+ /* Individual chip settings */
+ switch (chiptype) {
+ case MAX310X_TYPE_MAX3107:
+ s->name = "MAX3107";
+ s->nr_gpio = 4;
+ s->uart.nr = 1;
+ s->regcfg.max_register = 0x1f;
+ break;
+ case MAX310X_TYPE_MAX3108:
+ s->name = "MAX3108";
+ s->nr_gpio = 4;
+ s->uart.nr = 1;
+ s->regcfg.max_register = 0x1e;
+ break;
+ default:
+ dev_err(dev, "Unsupported chip type %i\n", chiptype);
+ return -ENOTSUPP;
+ }
+
+ /* Check input frequency */
+ if ((pdata->driver_flags & MAX310X_EXT_CLK) &&
+ ((pdata->frequency < 500000) || (pdata->frequency > 35000000)))
+ goto err_freq;
+ /* Check frequency for quartz */
+ if (!(pdata->driver_flags & MAX310X_EXT_CLK) &&
+ ((pdata->frequency < 1000000) || (pdata->frequency > 4000000)))
+ goto err_freq;
+
+ mutex_init(&s->max310x_mutex);
+
+ /* Setup SPI bus */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ spi->max_speed_hz = 26000000;
+ spi_setup(spi);
+
+ /* Setup regmap */
+ s->regcfg.reg_bits = 8;
+ s->regcfg.val_bits = 8;
+ s->regcfg.read_flag_mask = 0x00;
+ s->regcfg.write_flag_mask = 0x80;
+ s->regcfg.cache_type = REGCACHE_RBTREE;
+ s->regcfg.writeable_reg = max3107_8_reg_writeable;
+ s->regcfg.volatile_reg = max310x_reg_volatile;
+ s->regcfg.precious_reg = max310x_reg_precious;
+ s->regmap = devm_regmap_init_spi(spi, &s->regcfg);
+ if (IS_ERR(s->regmap)) {
+ ret = PTR_ERR(s->regmap);
+ dev_err(dev, "Failed to initialize register map\n");
+ goto err_out;
+ }
+
+ /* Reset chip & check SPI function */
+ ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT);
+ if (ret) {
+ dev_err(dev, "SPI transfer failed\n");
+ goto err_out;
+ }
+ /* Clear chip reset */
+ regmap_write(s->regmap, MAX310X_MODE2_REG, 0);
+
+ switch (chiptype) {
+ case MAX310X_TYPE_MAX3107:
+ /* Check REV ID to ensure we are talking to what we expect */
+ regmap_read(s->regmap, MAX3107_REVID_REG, &val);
+ if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) {
+ dev_err(dev, "%s ID 0x%02x does not match\n",
+ s->name, val);
+ ret = -ENODEV;
+ goto err_out;
+ }
+ break;
+ case MAX310X_TYPE_MAX3108:
+ /* MAX3108 have not REV ID register, we just check default value
+ * from clocksource register to make sure everything works.
+ */
+ regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val);
+ if (val != (MAX310X_CLKSRC_EXTCLK_BIT |
+ MAX310X_CLKSRC_PLLBYP_BIT)) {
+ dev_err(dev, "%s not present\n", s->name);
+ ret = -ENODEV;
+ goto err_out;
+ }
+ break;
+ }
+
+ /* Board specific configure */
+ if (pdata->init)
+ pdata->init();
+ if (pdata->suspend)
+ pdata->suspend(0);
+
+ /* Calculate referecne clock */
+ s->uartclk = max310x_set_ref_clk(s);
+
+ /* Disable all interrupts */
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+
+ /* Setup MODE1 register */
+ val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */
+ if (pdata->driver_flags & MAX310X_AUTOSLEEP)
+ val = MAX310X_MODE1_AUTOSLEEP_BIT;
+ regmap_write(s->regmap, MAX310X_MODE1_REG, val);
+
+ /* Setup interrupt */
+ ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(dev), s);
+ if (ret) {
+ dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq);
+ goto err_out;
+ }
+
+ /* Register UART driver */
+ s->uart.owner = THIS_MODULE;
+ s->uart.driver_name = dev_name(dev);
+ s->uart.dev_name = "ttyMAX";
+ s->uart.major = MAX310X_MAJOR;
+ s->uart.minor = MAX310X_MINOR;
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(dev, "Registering UART driver failed\n");
+ goto err_out;
+ }
+
+ /* Initialize workqueue for start TX */
+ s->wq = create_freezable_workqueue(dev_name(dev));
+ INIT_WORK(&s->tx_work, max310x_wq_proc);
+
+ /* Initialize UART port data */
+ s->port.line = 0;
+ s->port.dev = dev;
+ s->port.irq = spi->irq;
+ s->port.type = PORT_MAX310X;
+ s->port.fifosize = MAX310X_FIFO_SIZE;
+ s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port.iotype = UPIO_PORT;
+ s->port.membase = (void __iomem *)0xffffffff; /* Bogus value */
+ s->port.uartclk = s->uartclk;
+ s->port.ops = &max310x_ops;
+ uart_add_one_port(&s->uart, &s->port);
+
+#ifdef CONFIG_GPIOLIB
+ /* Setup GPIO cotroller */
+ if (pdata->gpio_base) {
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.dev = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = max310x_gpio_direction_input;
+ s->gpio.get = max310x_gpio_get;
+ s->gpio.direction_output= max310x_gpio_direction_output;
+ s->gpio.set = max310x_gpio_set;
+ s->gpio.base = pdata->gpio_base;
+ s->gpio.ngpio = s->nr_gpio;
+ if (gpiochip_add(&s->gpio)) {
+ /* Indicate that we should not call gpiochip_remove */
+ s->gpio.base = 0;
+ }
+ } else
+ dev_info(dev, "GPIO support not enabled\n");
+#endif
+
+ /* Go to suspend mode */
+ if (pdata->suspend)
+ pdata->suspend(1);
+
+ return 0;
+
+err_freq:
+ dev_err(dev, "Frequency parameter incorrect\n");
+ ret = -EINVAL;
+
+err_out:
+ dev_set_drvdata(dev, NULL);
+
+ return ret;
+}
+
+static int __devexit max310x_remove(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct max310x_port *s = dev_get_drvdata(dev);
+ int ret = 0;
+
+ dev_dbg(dev, "Removing port\n");
+
+ devm_free_irq(dev, s->port.irq, s);
+
+ destroy_workqueue(s->wq);
+
+ uart_remove_one_port(&s->uart, &s->port);
+
+ uart_unregister_driver(&s->uart);
+
+#ifdef CONFIG_GPIOLIB
+ if (s->pdata->gpio_base) {
+ ret = gpiochip_remove(&s->gpio);
+ if (ret)
+ dev_err(dev, "Failed to remove gpio chip: %d\n", ret);
+ }
+#endif
+
+ dev_set_drvdata(dev, NULL);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+ if (s->pdata->exit)
+ s->pdata->exit();
+
+ return ret;
+}
+
+static const struct spi_device_id max310x_id_table[] = {
+ { "max3107", MAX310X_TYPE_MAX3107 },
+ { "max3108", MAX310X_TYPE_MAX3108 },
+};
+MODULE_DEVICE_TABLE(spi, max310x_id_table);
+
+static struct spi_driver max310x_driver = {
+ .driver = {
+ .name = "max310x",
+ .owner = THIS_MODULE,
+ },
+ .probe = max310x_probe,
+ .remove = __devexit_p(max310x_remove),
+ .suspend = max310x_suspend,
+ .resume = max310x_resume,
+ .id_table = max310x_id_table,
+};
+module_spi_driver(max310x_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("MAX310X serial driver");
}
if (new->c_cflag & PARENB) {
+ if (new->c_cflag & CMSPAR)
+ mr1 |= MPC52xx_PSC_MODE_PARFORCE;
+
+ /* With CMSPAR, PARODD also means high parity (same as termios) */
mr1 |= (new->c_cflag & PARODD) ?
MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
- } else
+ } else {
mr1 |= MPC52xx_PSC_MODE_PARNONE;
-
+ }
mr2 = 0;
return PTR_ERR(msm_port->clk);
if (msm_port->is_uartdm)
- clk_set_rate(msm_port->clk, 7372800);
+ clk_set_rate(msm_port->clk, 1843200);
port->uartclk = clk_get_rate(msm_port->clk);
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
return ret;
for (i = 0; i < smd_tty_channels_len; i++) {
- tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
- smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
- tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+ struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
+ tty_port_init(port);
+ port->ops = &smd_tty_port_ops;
+ tty_port_register_device(port, smd_tty_driver,
+ smd_tty_channels[i].id, NULL);
}
return 0;
ctrl &= ~AUART_CTRL2_RTSEN;
if (mctrl & TIOCM_RTS) {
- if (u->state->port.flags & ASYNC_CTS_FLOW)
+ if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
}
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
- writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
-
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR_CLR);
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+
clk_disable_unprepare(s->clk);
}
auart_port[pdev->id] = NULL;
+ put_device(s->dev);
clk_put(s->clk);
free_irq(s->irq, s);
kfree(s);
port->uartclk = clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
+
+ if (of_find_property(np, "no-loopback-test", NULL))
+ port->flags |= UPF_SKIP_TEST;
+
port->dev = &ofdev->dev;
if (type == PORT_TEGRA)
switch (port_type) {
#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
- ret = serial8250_register_port(&port);
+ {
+ /* For now the of bindings don't support the extra
+ 8250 specific bits */
+ struct uart_8250_port port8250;
+ memset(&port8250, 0, sizeof(port8250));
+ port8250.port = port;
+ ret = serial8250_register_8250_port(&port8250);
break;
+ }
#endif
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
case PORT_NWPSERIAL:
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
-#include <plat/dma.h>
-#include <plat/dmtimer.h>
#include <plat/omap-serial.h>
#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y))
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
/* FCR register bitmasks */
-#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6
#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
+#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK (0x3 << 4)
/* MVR register bitmasks */
#define OMAP_UART_MVR_SCHEME_SHIFT 30
#define OMAP_UART_MVR_MAJ_SHIFT 8
#define OMAP_UART_MVR_MIN_MASK 0x3f
+struct uart_omap_port {
+ struct uart_port port;
+ struct uart_omap_dma uart_dma;
+ struct device *dev;
+
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char fcr;
+ unsigned char efr;
+ unsigned char dll;
+ unsigned char dlh;
+ unsigned char mdr1;
+ unsigned char scr;
+
+ int use_dma;
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+ unsigned int lsr_break_flag;
+ unsigned char msr_saved_flags;
+ char name[20];
+ unsigned long port_activity;
+ u32 context_loss_cnt;
+ u32 errata;
+ u8 wakeups_enabled;
+ unsigned int irq_pending:1;
+
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_active;
+
+ struct pm_qos_request pm_qos_request;
+ u32 latency;
+ u32 calc_latency;
+ struct work_struct qos_work;
+ struct pinctrl *pins;
+};
+
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
+
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
-static void serial_omap_rxdma_poll(unsigned long uart_no);
-static int serial_omap_start_rxdma(struct uart_omap_port *up);
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
static struct workqueue_struct *serial_omap_uart_wq;
serial_out(up, UART_FCR, 0);
}
+static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->get_context_loss_count)
+ return 0;
+
+ return pdata->get_context_loss_count(up->dev);
+}
+
+static void serial_omap_set_forceidle(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->set_forceidle)
+ return;
+
+ pdata->set_forceidle(up->dev);
+}
+
+static void serial_omap_set_noidle(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->set_noidle)
+ return;
+
+ pdata->set_noidle(up->dev);
+}
+
+static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->enable_wakeup)
+ return;
+
+ pdata->enable_wakeup(up->dev, enable);
+}
+
/*
* serial_omap_get_divisor - calculate divisor value
* @port: uart port info
return port->uartclk/(baud * divisor);
}
-static void serial_omap_stop_rxdma(struct uart_omap_port *up)
-{
- if (up->uart_dma.rx_dma_used) {
- del_timer(&up->uart_dma.rx_timer);
- omap_stop_dma(up->uart_dma.rx_dma_channel);
- omap_free_dma(up->uart_dma.rx_dma_channel);
- up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
- up->uart_dma.rx_dma_used = false;
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- }
-}
-
static void serial_omap_enable_ms(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_stop_tx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
- struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (up->use_dma &&
- up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
- /*
- * Check if dma is still active. If yes do nothing,
- * return. Else stop dma
- */
- if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
- return;
- omap_stop_dma(up->uart_dma.tx_dma_channel);
- omap_free_dma(up->uart_dma.tx_dma_channel);
- up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- }
-
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
- if (!up->use_dma && pdata && pdata->set_forceidle)
- pdata->set_forceidle(up->pdev);
+ serial_omap_set_forceidle(up);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_stop_rx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- pm_runtime_get_sync(&up->pdev->dev);
- if (up->use_dma)
- serial_omap_stop_rxdma(up);
+ pm_runtime_get_sync(up->dev);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
-}
-
-static inline void receive_chars(struct uart_omap_port *up,
- unsigned int *status)
-{
- struct tty_struct *tty = up->port.state->port.tty;
- unsigned int flag, lsr = *status;
- unsigned char ch = 0;
- int max_count = 256;
-
- do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- /*
- * For statistics only
- */
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE) {
- up->port.icount.parity++;
- } else if (lsr & UART_LSR_FE) {
- up->port.icount.frame++;
- }
-
- if (lsr & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= up->port.read_status_mask;
-
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- lsr |= up->lsr_break_flag;
- }
-#endif
- if (lsr & UART_LSR_BI)
- flag = TTY_BREAK;
- else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
- uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
-ignore_char:
- lsr = serial_in(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
-static void transmit_chars(struct uart_omap_port *up)
+static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
{
struct circ_buf *xmit = &up->port.state->xmit;
int count;
+ if (!(lsr & UART_LSR_THRE))
+ return;
+
if (up->port.x_char) {
serial_out(up, UART_TX, up->port.x_char);
up->port.icount.tx++;
break;
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ spin_unlock(&up->port.lock);
uart_write_wakeup(&up->port);
+ spin_lock(&up->port.lock);
+ }
if (uart_circ_empty(xmit))
serial_omap_stop_tx(&up->port);
static void serial_omap_start_tx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
- struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
- struct circ_buf *xmit;
- unsigned int start;
- int ret = 0;
-
- if (!up->use_dma) {
- pm_runtime_get_sync(&up->pdev->dev);
- serial_omap_enable_ier_thri(up);
- if (pdata && pdata->set_noidle)
- pdata->set_noidle(up->pdev);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- return;
- }
-
- if (up->uart_dma.tx_dma_used)
- return;
-
- xmit = &up->port.state->xmit;
-
- if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
- pm_runtime_get_sync(&up->pdev->dev);
- ret = omap_request_dma(up->uart_dma.uart_dma_tx,
- "UART Tx DMA",
- (void *)uart_tx_dma_callback, up,
- &(up->uart_dma.tx_dma_channel));
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (ret < 0) {
- serial_omap_enable_ier_thri(up);
- return;
- }
- }
- spin_lock(&(up->uart_dma.tx_lock));
- up->uart_dma.tx_dma_used = true;
- spin_unlock(&(up->uart_dma.tx_lock));
-
- start = up->uart_dma.tx_buf_dma_phys +
- (xmit->tail & (UART_XMIT_SIZE - 1));
-
- up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
- /*
- * It is a circular buffer. See if the buffer has wounded back.
- * If yes it will have to be transferred in two separate dma
- * transfers
- */
- if (start + up->uart_dma.tx_buf_size >=
- up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
- up->uart_dma.tx_buf_size =
- (up->uart_dma.tx_buf_dma_phys +
- UART_XMIT_SIZE) - start;
-
- omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC, start, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.tx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_tx, 0);
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.tx_dma_channel);
+ pm_runtime_get_sync(up->dev);
+ serial_omap_enable_ier_thri(up);
+ serial_omap_set_noidle(up);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static unsigned int check_modem_status(struct uart_omap_port *up)
return status;
}
+static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
+{
+ unsigned int flag;
+
+ up->port.icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (lsr & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ return;
+
+ }
+
+ if (lsr & UART_LSR_PE) {
+ flag = TTY_PARITY;
+ up->port.icount.parity++;
+ }
+
+ if (lsr & UART_LSR_FE) {
+ flag = TTY_FRAME;
+ up->port.icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ lsr |= up->lsr_break_flag;
+ }
+#endif
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, 0, flag);
+}
+
+static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr)
+{
+ unsigned char ch = 0;
+ unsigned int flag;
+
+ if (!(lsr & UART_LSR_DR))
+ return;
+
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ return;
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+}
+
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
-static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
+static irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned int iir, lsr;
- unsigned long flags;
+ unsigned int type;
+ irqreturn_t ret = IRQ_NONE;
+ int max_count = 256;
- pm_runtime_get_sync(&up->pdev->dev);
- iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT) {
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- return IRQ_NONE;
- }
+ spin_lock(&up->port.lock);
+ pm_runtime_get_sync(up->dev);
- spin_lock_irqsave(&up->port.lock, flags);
- lsr = serial_in(up, UART_LSR);
- if (iir & UART_IIR_RLSI) {
- if (!up->use_dma) {
- if (lsr & UART_LSR_DR)
- receive_chars(up, &lsr);
- } else {
- up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- if ((serial_omap_start_rxdma(up) != 0) &&
- (lsr & UART_LSR_DR))
- receive_chars(up, &lsr);
+ do {
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ break;
+
+ ret = IRQ_HANDLED;
+ lsr = serial_in(up, UART_LSR);
+
+ /* extract IRQ type from IIR register */
+ type = iir & 0x3e;
+
+ switch (type) {
+ case UART_IIR_MSI:
+ check_modem_status(up);
+ break;
+ case UART_IIR_THRI:
+ transmit_chars(up, lsr);
+ break;
+ case UART_IIR_RX_TIMEOUT:
+ /* FALLTHROUGH */
+ case UART_IIR_RDI:
+ serial_omap_rdi(up, lsr);
+ break;
+ case UART_IIR_RLSI:
+ serial_omap_rlsi(up, lsr);
+ break;
+ case UART_IIR_CTS_RTS_DSR:
+ /* simply try again */
+ break;
+ case UART_IIR_XOFF:
+ /* FALLTHROUGH */
+ default:
+ break;
}
- }
+ } while (!(iir & UART_IIR_NO_INT) && max_count--);
- check_modem_status(up);
- if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
- transmit_chars(up);
+ spin_unlock(&up->port.lock);
- spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ tty_flip_buffer_push(tty);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
up->port_activity = jiffies;
- return IRQ_HANDLED;
+
+ return ret;
}
static unsigned int serial_omap_tx_empty(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
unsigned int ret = 0;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
return ret;
}
static unsigned int serial_omap_get_mctrl(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned int status;
unsigned int ret = 0;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
status = check_modem_status(up);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char mcr = 0;
dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
up->mcr = serial_in(up, UART_MCR);
up->mcr |= mcr;
serial_out(up, UART_MCR, up->mcr);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
+
+ if (gpio_is_valid(up->DTR_gpio) &&
+ !!(mctrl & TIOCM_DTR) != up->DTR_active) {
+ up->DTR_active = !up->DTR_active;
+ if (gpio_cansleep(up->DTR_gpio))
+ schedule_work(&up->qos_work);
+ else
+ gpio_set_value(up->DTR_gpio,
+ up->DTR_active != up->DTR_inverted);
+ }
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static int serial_omap_startup(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
int retval;
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
spin_unlock_irqrestore(&up->port.lock, flags);
up->msr_saved_flags = 0;
- if (up->use_dma) {
- free_page((unsigned long)up->port.state->xmit.buf);
- up->port.state->xmit.buf = dma_alloc_coherent(NULL,
- UART_XMIT_SIZE,
- (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
- 0);
- init_timer(&(up->uart_dma.rx_timer));
- up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
- up->uart_dma.rx_timer.data = up->port.line;
- /* Currently the buffer size is 4KB. Can increase it */
- up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
- up->uart_dma.rx_buf_size,
- (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
- }
/*
* Finally, enable interrupts. Note: Modem status interrupts
* are set via set_termios(), which will be occurring imminently
/* Enable module level wake up */
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
up->port_activity = jiffies;
return 0;
}
static void serial_omap_shutdown(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
/*
* Disable interrupts from this port
*/
*/
if (serial_in(up, UART_LSR) & UART_LSR_DR)
(void) serial_in(up, UART_RX);
- if (up->use_dma) {
- dma_free_coherent(up->port.dev,
- UART_XMIT_SIZE, up->port.state->xmit.buf,
- up->uart_dma.tx_buf_dma_phys);
- up->port.state->xmit.buf = NULL;
- serial_omap_stop_rx(port);
- dma_free_coherent(up->port.dev,
- up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
- up->uart_dma.rx_buf_dma_phys);
- up->uart_dma.rx_buf = NULL;
- }
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
free_irq(up->port.irq, up);
}
/*
* IXON Flag:
- * Enable XON/XOFF flow control on output.
- * Transmit XON1, XOFF1
+ * Flow control for OMAP.TX
+ * OMAP.RX should listen for XON/XOFF
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * Flow control for OMAP.RX
+ * OMAP.TX should send XON/XOFF
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
qos_work);
pm_qos_update_request(&up->pm_qos_request, up->latency);
+ if (gpio_is_valid(up->DTR_gpio))
+ gpio_set_value_cansleep(up->DTR_gpio,
+ up->DTR_active != up->DTR_inverted);
}
static void
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char cval = 0;
unsigned char efr = 0;
unsigned long flags = 0;
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
UART_FCR_ENABLE_FIFO;
- if (up->use_dma)
- up->fcr |= UART_FCR_DMA_SELECT;
/*
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
spin_lock_irqsave(&up->port.lock, flags);
/*
up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
- if (up->use_dma) {
- serial_out(up, UART_TI752_TLR, 0);
- up->scr |= UART_FCR_TRIGGER_4;
- } else {
- /* Set receive FIFO threshold to 1 byte */
- up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
- up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
- }
+ /* Set receive FIFO threshold to 16 characters and
+ * transmit FIFO threshold to 16 spaces
+ */
+ up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
+ up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
+ up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 |
+ UART_FCR_ENABLE_FIFO;
serial_out(up, UART_FCR, up->fcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
}
+static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
+{
+ struct uart_omap_port *up = to_uart_omap_port(port);
+
+ serial_omap_enable_wakeup(up, state);
+
+ return 0;
+}
+
static void
serial_omap_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char efr;
dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
- if (!device_may_wakeup(&up->pdev->dev)) {
+ if (!device_may_wakeup(up->dev)) {
if (!state)
- pm_runtime_forbid(&up->pdev->dev);
+ pm_runtime_forbid(up->dev);
else
- pm_runtime_allow(&up->pdev->dev);
+ pm_runtime_allow(up->dev);
}
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_release_port(struct uart_port *port)
static void serial_omap_config_port(struct uart_port *port, int flags)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
up->port.line);
static const char *
serial_omap_type(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line);
return up->name;
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static int serial_omap_poll_get_char(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned int status;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
status = serial_in(up, UART_LSR);
- if (!(status & UART_LSR_DR))
- return NO_POLL_CHAR;
+ if (!(status & UART_LSR_DR)) {
+ status = NO_POLL_CHAR;
+ goto out;
+ }
status = serial_in(up, UART_RX);
- pm_runtime_put(&up->pdev->dev);
+
+out:
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
+
return status;
}
static void serial_omap_console_putchar(struct uart_port *port, int ch)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
unsigned int ier;
int locked = 1;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
local_irq_save(flags);
if (up->port.sysrq)
if (up->msr_saved_flags)
check_modem_status(up);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
.shutdown = serial_omap_shutdown,
.set_termios = serial_omap_set_termios,
.pm = serial_omap_pm,
+ .set_wake = serial_omap_set_wake,
.type = serial_omap_type,
.release_port = serial_omap_release_port,
.request_port = serial_omap_request_port,
}
#endif
-static void serial_omap_rxdma_poll(unsigned long uart_no)
-{
- struct uart_omap_port *up = ui[uart_no];
- unsigned int curr_dma_pos, curr_transmitted_size;
- int ret = 0;
-
- curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
- if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
- (curr_dma_pos == 0)) {
- if (jiffies_to_msecs(jiffies - up->port_activity) <
- up->uart_dma.rx_timeout) {
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- } else {
- serial_omap_stop_rxdma(up);
- up->ier |= (UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- }
- return;
- }
-
- curr_transmitted_size = curr_dma_pos -
- up->uart_dma.prev_rx_dma_pos;
- up->port.icount.rx += curr_transmitted_size;
- tty_insert_flip_string(up->port.state->port.tty,
- up->uart_dma.rx_buf +
- (up->uart_dma.prev_rx_dma_pos -
- up->uart_dma.rx_buf_dma_phys),
- curr_transmitted_size);
- tty_flip_buffer_push(up->port.state->port.tty);
- up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
- if (up->uart_dma.rx_buf_size +
- up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
- ret = serial_omap_start_rxdma(up);
- if (ret < 0) {
- serial_omap_stop_rxdma(up);
- up->ier |= (UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- }
- } else {
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- }
- up->port_activity = jiffies;
-}
-
-static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
-{
- return;
-}
-
-static int serial_omap_start_rxdma(struct uart_omap_port *up)
-{
- int ret = 0;
-
- if (up->uart_dma.rx_dma_channel == -1) {
- pm_runtime_get_sync(&up->pdev->dev);
- ret = omap_request_dma(up->uart_dma.uart_dma_rx,
- "UART Rx DMA",
- (void *)uart_rx_dma_callback, up,
- &(up->uart_dma.rx_dma_channel));
- if (ret < 0)
- return ret;
-
- omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC,
- up->uart_dma.rx_buf_dma_phys, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.rx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_rx, 0);
- }
- up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.rx_dma_channel);
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- up->uart_dma.rx_dma_used = true;
- return ret;
-}
-
-static void serial_omap_continue_tx(struct uart_omap_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- unsigned int start = up->uart_dma.tx_buf_dma_phys
- + (xmit->tail & (UART_XMIT_SIZE - 1));
-
- if (uart_circ_empty(xmit))
- return;
-
- up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
- /*
- * It is a circular buffer. See if the buffer has wounded back.
- * If yes it will have to be transferred in two separate dma
- * transfers
- */
- if (start + up->uart_dma.tx_buf_size >=
- up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
- up->uart_dma.tx_buf_size =
- (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
- omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC, start, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.tx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_tx, 0);
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.tx_dma_channel);
-}
-
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
-{
- struct uart_omap_port *up = (struct uart_omap_port *)data;
- struct circ_buf *xmit = &up->port.state->xmit;
-
- xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
- (UART_XMIT_SIZE - 1);
- up->port.icount.tx += up->uart_dma.tx_buf_size;
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- if (uart_circ_empty(xmit)) {
- spin_lock(&(up->uart_dma.tx_lock));
- serial_omap_stop_tx(&up->port);
- up->uart_dma.tx_dma_used = false;
- spin_unlock(&(up->uart_dma.tx_lock));
- } else {
- omap_stop_dma(up->uart_dma.tx_dma_channel);
- serial_omap_continue_tx(up);
- }
- up->port_activity = jiffies;
- return;
-}
-
-static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up)
{
u32 mvr, scheme;
u16 revision, major, minor;
minor = (mvr & OMAP_UART_MVR_MIN_MASK);
break;
default:
- dev_warn(&up->pdev->dev,
+ dev_warn(up->dev,
"Unknown %s revision, defaulting to highest\n",
up->name);
/* highest possible revision */
}
}
-static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
{
struct omap_uart_port_info *omap_up_info;
return omap_up_info;
}
-static int serial_omap_probe(struct platform_device *pdev)
+static int __devinit serial_omap_probe(struct platform_device *pdev)
{
struct uart_omap_port *up;
- struct resource *mem, *irq, *dma_tx, *dma_rx;
+ struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
- int ret = -ENOSPC;
+ int ret;
if (pdev->dev.of_node)
omap_up_info = of_get_uart_port_info(&pdev->dev);
return -EBUSY;
}
- dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!dma_rx)
- return -ENXIO;
-
- dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!dma_tx)
- return -ENXIO;
+ if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+ omap_up_info->DTR_present) {
+ ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
+ if (ret < 0)
+ return ret;
+ ret = gpio_direction_output(omap_up_info->DTR_gpio,
+ omap_up_info->DTR_inverted);
+ if (ret < 0)
+ return ret;
+ }
up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
- up->pdev = pdev;
+ if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+ omap_up_info->DTR_present) {
+ up->DTR_gpio = omap_up_info->DTR_gpio;
+ up->DTR_inverted = omap_up_info->DTR_inverted;
+ } else
+ up->DTR_gpio = -EINVAL;
+ up->DTR_active = 0;
+
+ up->dev = &pdev->dev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
up->port.iotype = UPIO_MEM;
goto err_port_line;
}
+ up->pins = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(up->pins)) {
+ dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
+ up->port.line, PTR_ERR(up->pins));
+ up->pins = NULL;
+ }
+
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
up->port.membase = devm_ioremap(&pdev->dev, mem->start,
dev_warn(&pdev->dev, "No clock speed specified: using default:"
"%d\n", DEFAULT_CLK_SPEED);
}
- up->uart_dma.uart_base = mem->start;
-
- if (omap_up_info->dma_enabled) {
- up->uart_dma.uart_dma_tx = dma_tx->start;
- up->uart_dma.uart_dma_rx = dma_rx->start;
- up->use_dma = 1;
- up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
- up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
- up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
- spin_lock_init(&(up->uart_dma.tx_lock));
- spin_lock_init(&(up->uart_dma.rx_lock));
- up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
- up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
- }
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
serial_omap_uart_wq = create_singlethread_workqueue(up->name);
INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
+ platform_set_drvdata(pdev, up);
+ pm_runtime_enable(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
omap_up_info->autosuspend_timeout);
pm_runtime_irq_safe(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
omap_serial_fill_features_erratas(up);
if (ret != 0)
goto err_add_port;
- pm_runtime_put(&pdev->dev);
- platform_set_drvdata(pdev, up);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
return 0;
err_add_port:
return ret;
}
-static int serial_omap_remove(struct platform_device *dev)
+static int __devexit serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
- if (up) {
- pm_runtime_disable(&up->pdev->dev);
- uart_remove_one_port(&serial_omap_reg, &up->port);
- pm_qos_remove_request(&up->pm_qos_request);
- }
+ pm_runtime_put_sync(up->dev);
+ pm_runtime_disable(up->dev);
+ uart_remove_one_port(&serial_omap_reg, &up->port);
+ pm_qos_remove_request(&up->pm_qos_request);
- platform_set_drvdata(dev, NULL);
return 0;
}
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
- dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+ dev_crit(up->dev, "Errata i202: timedout %x\n",
serial_in(up, UART_LSR));
break;
}
if (!up)
return -EINVAL;
- if (!pdata || !pdata->enable_wakeup)
+ if (!pdata)
return 0;
- if (pdata->get_context_loss_count)
- up->context_loss_cnt = pdata->get_context_loss_count(dev);
+ up->context_loss_cnt = serial_omap_get_context_loss_count(up);
if (device_may_wakeup(dev)) {
if (!up->wakeups_enabled) {
- pdata->enable_wakeup(up->pdev, true);
+ serial_omap_enable_wakeup(up, true);
up->wakeups_enabled = true;
}
} else {
if (up->wakeups_enabled) {
- pdata->enable_wakeup(up->pdev, false);
+ serial_omap_enable_wakeup(up, false);
up->wakeups_enabled = false;
}
}
- /* Errata i291 */
- if (up->use_dma && pdata->set_forceidle &&
- (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
- pdata->set_forceidle(up->pdev);
-
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
schedule_work(&up->qos_work);
struct omap_uart_port_info *pdata = dev->platform_data;
if (up && pdata) {
- if (pdata->get_context_loss_count) {
- u32 loss_cnt = pdata->get_context_loss_count(dev);
+ u32 loss_cnt = serial_omap_get_context_loss_count(up);
if (up->context_loss_cnt != loss_cnt)
serial_omap_restore_context(up);
- }
-
- /* Errata i291 */
- if (up->use_dma && pdata->set_noidle &&
- (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
- pdata->set_noidle(up->pdev);
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
- .remove = serial_omap_remove,
+ .remove = __devexit_p(serial_omap_remove),
.driver = {
.name = DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
priv->tx_dma_use = 1;
priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+ if (!priv->sg_tx_p) {
+ dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
+ return 0;
+ }
sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
sg = priv->sg_tx_p;
{
struct uart_pxa_port *up = serial_pxa_ports[co->index];
unsigned int ier;
+ unsigned long flags;
+ int locked = 1;
clk_prepare_enable(up->clk);
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&up->port.lock);
+ else
+ spin_lock(&up->port.lock);
+
/*
* First save the IER then disable the interrupts
*/
wait_for_xmitr(up);
serial_out(up, UART_IER, ier);
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+
clk_disable_unprepare(up->clk);
}
static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
{
- return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+ return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
}
/*
dbg("break!\n");
port->icount.brk++;
if (uart_handle_break(port))
- goto ignore_char;
+ goto ignore_char;
}
if (uerstat & S3C2410_UERSTAT_FRAME)
s3c24xx_serial_portname(port), ourport);
if (ret != 0) {
- printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
+ dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
return ret;
}
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
+ dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
goto err;
}
ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", port->irq);
+ dev_err(port->dev, "cannot get irq %d\n", port->irq);
return ret;
}
switch (level) {
case 3:
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_disable(ourport->baudclk);
clk_disable(ourport->clk);
case 0:
clk_enable(ourport->clk);
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_enable(ourport->baudclk);
break;
default:
- printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+ dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
}
}
char clkname[MAX_CLK_NAME_LENGTH];
int calc_deviation, deviation = (1 << 30) - 1;
- *best_clk = NULL;
clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
ourport->info->def_clk_sel;
for (cnt = 0; cnt < info->num_clks; cnt++) {
sprintf(clkname, "clk_uart_baud%d", cnt);
clk = clk_get(ourport->port.dev, clkname);
- if (IS_ERR_OR_NULL(clk))
+ if (IS_ERR(clk))
continue;
rate = clk_get_rate(clk);
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct clk *clk = NULL;
+ struct clk *clk = ERR_PTR(-EINVAL);
unsigned long flags;
unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- if (!clk)
+ if (IS_ERR(clk))
return;
/* check to see if we need to change clock source */
if (ourport->baudclk != clk) {
s3c24xx_serial_setsource(port, clk_sel);
- if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+ if (!IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
- ourport->baudclk = NULL;
+ ourport->baudclk = ERR_PTR(-EINVAL);
}
clk_enable(clk);
if (tty == NULL)
goto exit;
- termios = tty->termios;
+ termios = &tty->termios;
if (termios == NULL) {
- printk(KERN_WARNING "%s: no termios?\n", __func__);
+ dev_warn(uport->dev, "%s: no termios?\n", __func__);
goto exit;
}
res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
if (res == NULL) {
- printk(KERN_ERR "failed to find memory resource for uart\n");
+ dev_err(port->dev, "failed to find memory resource for uart\n");
return -EINVAL;
}
ourport->rx_irq = ret;
ourport->tx_irq = ret + 1;
}
-
+
ret = platform_get_irq(platdev, 1);
if (ret > 0)
ourport->tx_irq = ret;
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
+ if (IS_ERR(ourport->baudclk))
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "* %s\n",
+ ourport->baudclk->name ?: "(null)");
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
return -ENODEV;
}
+ ourport->baudclk = ERR_PTR(-EINVAL);
ourport->info = ourport->drv_data->info;
ourport->cfg = (pdev->dev.platform_data) ?
(struct s3c2410_uartcfg *)pdev->dev.platform_data :
sprintf(clk_name, "clk_uart_baud%d", clk_sel);
clk = clk_get(port->dev, clk_name);
- if (!IS_ERR(clk) && clk != NULL)
+ if (!IS_ERR(clk))
rate = clk_get_rate(clk);
else
rate = 1;
ret = uart_register_driver(&s3c24xx_uart_drv);
if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
+ pr_err("Failed to register Samsung UART driver\n");
return -1;
}
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
+
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+ "in the linux-serial mailing list."
#if defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
--- /dev/null
+/*
+ * NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sccnxp.h>
+
+#define SCCNXP_NAME "uart-sccnxp"
+#define SCCNXP_MAJOR 204
+#define SCCNXP_MINOR 205
+
+#define SCCNXP_MR_REG (0x00)
+# define MR0_BAUD_NORMAL (0 << 0)
+# define MR0_BAUD_EXT1 (1 << 0)
+# define MR0_BAUD_EXT2 (5 << 0)
+# define MR0_FIFO (1 << 3)
+# define MR0_TXLVL (1 << 4)
+# define MR1_BITS_5 (0 << 0)
+# define MR1_BITS_6 (1 << 0)
+# define MR1_BITS_7 (2 << 0)
+# define MR1_BITS_8 (3 << 0)
+# define MR1_PAR_EVN (0 << 2)
+# define MR1_PAR_ODD (1 << 2)
+# define MR1_PAR_NO (4 << 2)
+# define MR2_STOP1 (7 << 0)
+# define MR2_STOP2 (0xf << 0)
+#define SCCNXP_SR_REG (0x01)
+#define SCCNXP_CSR_REG SCCNXP_SR_REG
+# define SR_RXRDY (1 << 0)
+# define SR_FULL (1 << 1)
+# define SR_TXRDY (1 << 2)
+# define SR_TXEMT (1 << 3)
+# define SR_OVR (1 << 4)
+# define SR_PE (1 << 5)
+# define SR_FE (1 << 6)
+# define SR_BRK (1 << 7)
+#define SCCNXP_CR_REG (0x02)
+# define CR_RX_ENABLE (1 << 0)
+# define CR_RX_DISABLE (1 << 1)
+# define CR_TX_ENABLE (1 << 2)
+# define CR_TX_DISABLE (1 << 3)
+# define CR_CMD_MRPTR1 (0x01 << 4)
+# define CR_CMD_RX_RESET (0x02 << 4)
+# define CR_CMD_TX_RESET (0x03 << 4)
+# define CR_CMD_STATUS_RESET (0x04 << 4)
+# define CR_CMD_BREAK_RESET (0x05 << 4)
+# define CR_CMD_START_BREAK (0x06 << 4)
+# define CR_CMD_STOP_BREAK (0x07 << 4)
+# define CR_CMD_MRPTR0 (0x0b << 4)
+#define SCCNXP_RHR_REG (0x03)
+#define SCCNXP_THR_REG SCCNXP_RHR_REG
+#define SCCNXP_IPCR_REG (0x04)
+#define SCCNXP_ACR_REG SCCNXP_IPCR_REG
+# define ACR_BAUD0 (0 << 7)
+# define ACR_BAUD1 (1 << 7)
+# define ACR_TIMER_MODE (6 << 4)
+#define SCCNXP_ISR_REG (0x05)
+#define SCCNXP_IMR_REG SCCNXP_ISR_REG
+# define IMR_TXRDY (1 << 0)
+# define IMR_RXRDY (1 << 1)
+# define ISR_TXRDY(x) (1 << ((x * 4) + 0))
+# define ISR_RXRDY(x) (1 << ((x * 4) + 1))
+#define SCCNXP_IPR_REG (0x0d)
+#define SCCNXP_OPCR_REG SCCNXP_IPR_REG
+#define SCCNXP_SOP_REG (0x0e)
+#define SCCNXP_ROP_REG (0x0f)
+
+/* Route helpers */
+#define MCTRL_MASK(sig) (0xf << (sig))
+#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
+#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
+
+/* Supported chip types */
+enum {
+ SCCNXP_TYPE_SC2681 = 2681,
+ SCCNXP_TYPE_SC2691 = 2691,
+ SCCNXP_TYPE_SC2692 = 2692,
+ SCCNXP_TYPE_SC2891 = 2891,
+ SCCNXP_TYPE_SC2892 = 2892,
+ SCCNXP_TYPE_SC28202 = 28202,
+ SCCNXP_TYPE_SC68681 = 68681,
+ SCCNXP_TYPE_SC68692 = 68692,
+};
+
+struct sccnxp_port {
+ struct uart_driver uart;
+ struct uart_port port[SCCNXP_MAX_UARTS];
+
+ const char *name;
+ int irq;
+
+ u8 imr;
+ u8 addr_mask;
+ int freq_std;
+
+ int flags;
+#define SCCNXP_HAVE_IO 0x00000001
+#define SCCNXP_HAVE_MR0 0x00000002
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+ struct console console;
+#endif
+
+ struct mutex sccnxp_mutex;
+
+ struct sccnxp_pdata pdata;
+};
+
+static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift)
+{
+ return readb(base + (reg << shift));
+}
+
+static inline void sccnxp_raw_write(void __iomem *base, u8 reg, u8 shift, u8 v)
+{
+ writeb(v, base + (reg << shift));
+}
+
+static inline u8 sccnxp_read(struct uart_port *port, u8 reg)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ return sccnxp_raw_read(port->membase, reg & s->addr_mask,
+ port->regshift);
+}
+
+static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ sccnxp_raw_write(port->membase, reg & s->addr_mask, port->regshift, v);
+}
+
+static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg)
+{
+ return sccnxp_read(port, (port->line << 3) + reg);
+}
+
+static inline void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
+{
+ sccnxp_write(port, (port->line << 3) + reg, v);
+}
+
+static int sccnxp_update_best_err(int a, int b, int *besterr)
+{
+ int err = abs(a - b);
+
+ if ((*besterr < 0) || (*besterr > err)) {
+ *besterr = err;
+ return 0;
+ }
+
+ return 1;
+}
+
+struct baud_table {
+ u8 csr;
+ u8 acr;
+ u8 mr0;
+ int baud;
+};
+
+const struct baud_table baud_std[] = {
+ { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, },
+ { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, },
+ { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, },
+ { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, },
+ { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, },
+ { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, },
+ { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, },
+ { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, },
+ { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, },
+ { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, },
+ { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, },
+ { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, },
+ { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, },
+ { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, },
+ { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, },
+ { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, },
+ { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, },
+ { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, },
+ { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, },
+ { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, },
+ { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, },
+ { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, },
+ { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, },
+ { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, },
+ { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, },
+ { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, },
+ { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, },
+ { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, },
+ { 0, 0, 0, 0 }
+};
+
+static void sccnxp_set_baud(struct uart_port *port, int baud)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ int div_std, tmp_baud, bestbaud = baud, besterr = -1;
+ u8 i, acr = 0, csr = 0, mr0 = 0;
+
+ /* Find best baud from table */
+ for (i = 0; baud_std[i].baud && besterr; i++) {
+ if (baud_std[i].mr0 && !(s->flags & SCCNXP_HAVE_MR0))
+ continue;
+ div_std = DIV_ROUND_CLOSEST(s->freq_std, baud_std[i].baud);
+ tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
+ if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
+ acr = baud_std[i].acr;
+ csr = baud_std[i].csr;
+ mr0 = baud_std[i].mr0;
+ bestbaud = tmp_baud;
+ }
+ }
+
+ if (s->flags & SCCNXP_HAVE_MR0) {
+ /* Enable FIFO, set half level for TX */
+ mr0 |= MR0_FIFO | MR0_TXLVL;
+ /* Update MR0 */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
+ }
+
+ sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
+ sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
+
+ dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
+ baud, bestbaud);
+}
+
+static void sccnxp_enable_irq(struct uart_port *port, int mask)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ s->imr |= mask << (port->line * 4);
+ sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_disable_irq(struct uart_port *port, int mask)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ s->imr &= ~(mask << (port->line * 4));
+ sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
+{
+ u8 bitmask;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
+ bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
+ if (state)
+ sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
+ else
+ sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
+ }
+}
+
+static void sccnxp_handle_rx(struct uart_port *port)
+{
+ u8 sr;
+ unsigned int ch, flag;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+ if (!tty)
+ return;
+
+ for (;;) {
+ sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+ if (!(sr & SR_RXRDY))
+ break;
+ sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
+
+ ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
+
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(sr)) {
+ if (sr & SR_BRK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & SR_PE)
+ port->icount.parity++;
+ else if (sr & SR_FE)
+ port->icount.frame++;
+ else if (sr & SR_OVR)
+ port->icount.overrun++;
+
+ sr &= port->read_status_mask;
+ if (sr & SR_BRK)
+ flag = TTY_BREAK;
+ else if (sr & SR_PE)
+ flag = TTY_PARITY;
+ else if (sr & SR_FE)
+ flag = TTY_FRAME;
+ else if (sr & SR_OVR)
+ flag = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (sr & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, sr, SR_OVR, ch, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+}
+
+static void sccnxp_handle_tx(struct uart_port *port)
+{
+ u8 sr;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (unlikely(port->x_char)) {
+ sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ /* Disable TX if FIFO is empty */
+ if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
+ sccnxp_disable_irq(port, IMR_TXRDY);
+
+ /* Set direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 0);
+ }
+ return;
+ }
+
+ while (!uart_circ_empty(xmit)) {
+ sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+ if (!(sr & SR_TXRDY))
+ break;
+
+ sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t sccnxp_ist(int irq, void *dev_id)
+{
+ int i;
+ u8 isr;
+ struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ for (;;) {
+ isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
+ isr &= s->imr;
+ if (!isr)
+ break;
+
+ dev_dbg(s->port[0].dev, "IRQ status: 0x%02x\n", isr);
+
+ for (i = 0; i < s->uart.nr; i++) {
+ if (isr & ISR_RXRDY(i))
+ sccnxp_handle_rx(&s->port[i]);
+ if (isr & ISR_TXRDY(i))
+ sccnxp_handle_tx(&s->port[i]);
+ }
+ }
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void sccnxp_start_tx(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Set direction to output */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 1);
+
+ sccnxp_enable_irq(port, IMR_TXRDY);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void sccnxp_stop_rx(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_tx_empty(struct uart_port *port)
+{
+ u8 val;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ val = sccnxp_port_read(port, SCCNXP_SR_REG);
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
+}
+
+static void sccnxp_enable_ms(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (!(s->flags & SCCNXP_HAVE_IO))
+ return;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
+ sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_get_mctrl(struct uart_port *port)
+{
+ u8 bitmask, ipr;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+
+ if (!(s->flags & SCCNXP_HAVE_IO))
+ return mctrl;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
+
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ DSR_IP);
+ mctrl &= ~TIOCM_DSR;
+ mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ CTS_IP);
+ mctrl &= ~TIOCM_CTS;
+ mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ DCD_IP);
+ mctrl &= ~TIOCM_CAR;
+ mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ RNG_IP);
+ mctrl &= ~TIOCM_RNG;
+ mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
+ }
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return mctrl;
+}
+
+static void sccnxp_break_ctl(struct uart_port *port, int break_state)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
+ CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ u8 mr1, mr2;
+ int baud;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(IXON | IXOFF | IXANY);
+
+ /* Disable RX & TX, reset break condition, status and FIFOs */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
+ CR_RX_DISABLE | CR_TX_DISABLE);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+ /* Word size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mr1 = MR1_BITS_5;
+ break;
+ case CS6:
+ mr1 = MR1_BITS_6;
+ break;
+ case CS7:
+ mr1 = MR1_BITS_7;
+ break;
+ default:
+ case CS8:
+ mr1 = MR1_BITS_8;
+ break;
+ }
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ mr1 |= MR1_PAR_ODD;
+ } else
+ mr1 |= MR1_PAR_NO;
+
+ /* Stop bits */
+ mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
+
+ /* Update desired format */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
+
+ /* Set read status mask */
+ port->read_status_mask = SR_OVR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SR_PE | SR_FE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SR_BRK;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNBRK)
+ port->ignore_status_mask |= SR_BRK;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
+
+ /* Setup baudrate */
+ baud = uart_get_baud_rate(port, termios, old, 50,
+ (s->flags & SCCNXP_HAVE_MR0) ?
+ 230400 : 38400);
+ sccnxp_set_baud(port, baud);
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* Enable RX & TX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_startup(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ if (s->flags & SCCNXP_HAVE_IO) {
+ /* Outputs are controlled manually */
+ sccnxp_write(port, SCCNXP_OPCR_REG, 0);
+ }
+
+ /* Reset break condition, status and FIFOs */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+ /* Enable RX & TX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+ /* Enable RX interrupt */
+ sccnxp_enable_irq(port, IMR_RXRDY);
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return 0;
+}
+
+static void sccnxp_shutdown(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Disable interrupts */
+ sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+
+ /* Disable TX & RX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
+
+ /* Leave direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 0);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static const char *sccnxp_type(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ return (port->type == PORT_SC26XX) ? s->name : NULL;
+}
+
+static void sccnxp_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static int sccnxp_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+static void sccnxp_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_SC26XX;
+}
+
+static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
+{
+ if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
+ return 0;
+ if (s->irq == port->irq)
+ return 0;
+
+ return -EINVAL;
+}
+
+static const struct uart_ops sccnxp_ops = {
+ .tx_empty = sccnxp_tx_empty,
+ .set_mctrl = sccnxp_set_mctrl,
+ .get_mctrl = sccnxp_get_mctrl,
+ .stop_tx = sccnxp_stop_tx,
+ .start_tx = sccnxp_start_tx,
+ .stop_rx = sccnxp_stop_rx,
+ .enable_ms = sccnxp_enable_ms,
+ .break_ctl = sccnxp_break_ctl,
+ .startup = sccnxp_startup,
+ .shutdown = sccnxp_shutdown,
+ .set_termios = sccnxp_set_termios,
+ .type = sccnxp_type,
+ .release_port = sccnxp_release_port,
+ .request_port = sccnxp_request_port,
+ .config_port = sccnxp_config_port,
+ .verify_port = sccnxp_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+static void sccnxp_console_putchar(struct uart_port *port, int c)
+{
+ int tryes = 100000;
+
+ while (tryes--) {
+ if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
+ sccnxp_port_write(port, SCCNXP_THR_REG, c);
+ break;
+ }
+ barrier();
+ }
+}
+
+static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
+{
+ struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+ struct uart_port *port = &s->port[co->index];
+
+ mutex_lock(&s->sccnxp_mutex);
+ uart_console_write(port, c, n, sccnxp_console_putchar);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_console_setup(struct console *co, char *options)
+{
+ struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+ struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
+ int baud = 9600, bits = 8, parity = 'n', flow = 'n';
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif
+
+static int __devinit sccnxp_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int chiptype = pdev->id_entry->driver_data;
+ struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
+ int i, ret, fifosize, freq_min, freq_max;
+ struct sccnxp_port *s;
+ void __iomem *membase;
+
+ if (!res) {
+ dev_err(&pdev->dev, "Missing memory resource data\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ dev_set_name(&pdev->dev, SCCNXP_NAME);
+
+ s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(&pdev->dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, s);
+
+ mutex_init(&s->sccnxp_mutex);
+
+ /* Individual chip settings */
+ switch (chiptype) {
+ case SCCNXP_TYPE_SC2681:
+ s->name = "SC2681";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2691:
+ s->name = "SC2691";
+ s->uart.nr = 1;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x07;
+ s->flags = 0;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2692:
+ s->name = "SC2692";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2891:
+ s->name = "SC2891";
+ s->uart.nr = 1;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 16;
+ freq_min = 100000;
+ freq_max = 8000000;
+ break;
+ case SCCNXP_TYPE_SC2892:
+ s->name = "SC2892";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 16;
+ freq_min = 100000;
+ freq_max = 8000000;
+ break;
+ case SCCNXP_TYPE_SC28202:
+ s->name = "SC28202";
+ s->uart.nr = 2;
+ s->freq_std = 14745600;
+ s->addr_mask = 0x7f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 256;
+ freq_min = 1000000;
+ freq_max = 50000000;
+ break;
+ case SCCNXP_TYPE_SC68681:
+ s->name = "SC68681";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC68692:
+ s->name = "SC68692";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype);
+ ret = -ENOTSUPP;
+ goto err_out;
+ }
+
+ if (!pdata) {
+ dev_warn(&pdev->dev,
+ "No platform data supplied, using defaults\n");
+ s->pdata.frequency = s->freq_std;
+ } else
+ memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
+
+ s->irq = platform_get_irq(pdev, 0);
+ if (s->irq <= 0) {
+ dev_err(&pdev->dev, "Missing irq resource data\n");
+ ret = -ENXIO;
+ goto err_out;
+ }
+
+ /* Check input frequency */
+ if ((s->pdata.frequency < freq_min) ||
+ (s->pdata.frequency > freq_max)) {
+ dev_err(&pdev->dev, "Frequency out of bounds\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!membase) {
+ dev_err(&pdev->dev, "Failed to ioremap\n");
+ ret = -EIO;
+ goto err_out;
+ }
+
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttySC";
+ s->uart.major = SCCNXP_MAJOR;
+ s->uart.minor = SCCNXP_MINOR;
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+ s->uart.cons = &s->console;
+ s->uart.cons->device = uart_console_device;
+ s->uart.cons->write = sccnxp_console_write;
+ s->uart.cons->setup = sccnxp_console_setup;
+ s->uart.cons->flags = CON_PRINTBUFFER;
+ s->uart.cons->index = -1;
+ s->uart.cons->data = s;
+ strcpy(s->uart.cons->name, "ttySC");
+#endif
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering UART driver failed\n");
+ goto err_out;
+ }
+
+ for (i = 0; i < s->uart.nr; i++) {
+ s->port[i].line = i;
+ s->port[i].dev = &pdev->dev;
+ s->port[i].irq = s->irq;
+ s->port[i].type = PORT_SC26XX;
+ s->port[i].fifosize = fifosize;
+ s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port[i].iotype = UPIO_MEM;
+ s->port[i].mapbase = res->start;
+ s->port[i].membase = membase;
+ s->port[i].regshift = s->pdata.reg_shift;
+ s->port[i].uartclk = s->pdata.frequency;
+ s->port[i].ops = &sccnxp_ops;
+ uart_add_one_port(&s->uart, &s->port[i]);
+ /* Set direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(&s->port[i], DIR_OP, 0);
+ }
+
+ /* Disable interrupts */
+ s->imr = 0;
+ sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
+
+ /* Board specific configure */
+ if (s->pdata.init)
+ s->pdata.init();
+
+ ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, sccnxp_ist,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), s);
+ if (!ret)
+ return 0;
+
+ dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
+
+err_out:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int __devexit sccnxp_remove(struct platform_device *pdev)
+{
+ int i;
+ struct sccnxp_port *s = platform_get_drvdata(pdev);
+
+ devm_free_irq(&pdev->dev, s->irq, s);
+
+ for (i = 0; i < s->uart.nr; i++)
+ uart_remove_one_port(&s->uart, &s->port[i]);
+
+ uart_unregister_driver(&s->uart);
+ platform_set_drvdata(pdev, NULL);
+
+ if (s->pdata.exit)
+ s->pdata.exit();
+
+ return 0;
+}
+
+static const struct platform_device_id sccnxp_id_table[] = {
+ { "sc2681", SCCNXP_TYPE_SC2681 },
+ { "sc2691", SCCNXP_TYPE_SC2691 },
+ { "sc2692", SCCNXP_TYPE_SC2692 },
+ { "sc2891", SCCNXP_TYPE_SC2891 },
+ { "sc2892", SCCNXP_TYPE_SC2892 },
+ { "sc28202", SCCNXP_TYPE_SC28202 },
+ { "sc68681", SCCNXP_TYPE_SC68681 },
+ { "sc68692", SCCNXP_TYPE_SC68692 },
+};
+MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
+
+static struct platform_driver sccnxp_uart_driver = {
+ .driver = {
+ .name = SCCNXP_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sccnxp_probe,
+ .remove = __devexit_p(sccnxp_remove),
+ .id_table = sccnxp_id_table,
+};
+module_platform_driver(sccnxp_uart_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("SCCNXP serial driver");
retval = uport->ops->startup(uport);
if (retval == 0) {
if (uart_console(uport) && uport->cons->cflag) {
- tty->termios->c_cflag = uport->cons->cflag;
+ tty->termios.c_cflag = uport->cons->cflag;
uport->cons->cflag = 0;
}
/*
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
tty->hw_stopped = 1;
/*
* Turn off DTR and RTS early.
*/
- if (!tty || (tty->termios->c_cflag & HUPCL))
+ if (!tty || (tty->termios.c_cflag & HUPCL))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
uart_port_shutdown(port);
* If we have no tty, termios, or the port does not exist,
* then we can't set the parameters for this port.
*/
- if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
+ if (!tty || uport->type == PORT_UNKNOWN)
return;
- termios = tty->termios;
+ termios = &tty->termios;
/*
* Set flags based on termios cflag
if (I_IXOFF(tty))
uart_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
uart_clear_mctrl(state->uart_port, TIOCM_RTS);
}
uart_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
uart_set_mctrl(port, TIOCM_RTS);
}
-static int uart_get_info(struct uart_state *state,
- struct serial_struct __user *retinfo)
+static void uart_get_info(struct tty_port *port,
+ struct uart_state *state,
+ struct serial_struct *retinfo)
{
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
- struct serial_struct tmp;
-
- memset(&tmp, 0, sizeof(tmp));
- /* Ensure the state we copy is consistent and no hardware changes
- occur as we go */
- mutex_lock(&port->mutex);
+ memset(retinfo, 0, sizeof(*retinfo));
- tmp.type = uport->type;
- tmp.line = uport->line;
- tmp.port = uport->iobase;
+ retinfo->type = uport->type;
+ retinfo->line = uport->line;
+ retinfo->port = uport->iobase;
if (HIGH_BITS_OFFSET)
- tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
- tmp.irq = uport->irq;
- tmp.flags = uport->flags;
- tmp.xmit_fifo_size = uport->fifosize;
- tmp.baud_base = uport->uartclk / 16;
- tmp.close_delay = jiffies_to_msecs(port->close_delay) / 10;
- tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+ retinfo->irq = uport->irq;
+ retinfo->flags = uport->flags;
+ retinfo->xmit_fifo_size = uport->fifosize;
+ retinfo->baud_base = uport->uartclk / 16;
+ retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10;
+ retinfo->closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
jiffies_to_msecs(port->closing_wait) / 10;
- tmp.custom_divisor = uport->custom_divisor;
- tmp.hub6 = uport->hub6;
- tmp.io_type = uport->iotype;
- tmp.iomem_reg_shift = uport->regshift;
- tmp.iomem_base = (void *)(unsigned long)uport->mapbase;
+ retinfo->custom_divisor = uport->custom_divisor;
+ retinfo->hub6 = uport->hub6;
+ retinfo->io_type = uport->iotype;
+ retinfo->iomem_reg_shift = uport->regshift;
+ retinfo->iomem_base = (void *)(unsigned long)uport->mapbase;
+}
+static int uart_get_info_user(struct uart_state *state,
+ struct serial_struct __user *retinfo)
+{
+ struct tty_port *port = &state->port;
+ struct serial_struct tmp;
+
+ /* Ensure the state we copy is consistent and no hardware changes
+ occur as we go */
+ mutex_lock(&port->mutex);
+ uart_get_info(port, state, &tmp);
mutex_unlock(&port->mutex);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return 0;
}
-static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
- struct serial_struct __user *newinfo)
+static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
+ struct uart_state *state,
+ struct serial_struct *new_info)
{
- struct serial_struct new_serial;
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
unsigned long new_port;
unsigned int change_irq, change_port, closing_wait;
unsigned int old_custom_divisor, close_delay;
upf_t old_flags, new_flags;
int retval = 0;
- if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
- return -EFAULT;
-
- new_port = new_serial.port;
+ new_port = new_info->port;
if (HIGH_BITS_OFFSET)
- new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+ new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET;
- new_serial.irq = irq_canonicalize(new_serial.irq);
- close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
- closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ new_info->irq = irq_canonicalize(new_info->irq);
+ close_delay = msecs_to_jiffies(new_info->close_delay * 10);
+ closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- msecs_to_jiffies(new_serial.closing_wait * 10);
+ msecs_to_jiffies(new_info->closing_wait * 10);
- /*
- * This semaphore protects port->count. It is also
- * very useful to prevent opens. Also, take the
- * port configuration semaphore to make sure that a
- * module insertion/removal doesn't change anything
- * under us.
- */
- mutex_lock(&port->mutex);
change_irq = !(uport->flags & UPF_FIXED_PORT)
- && new_serial.irq != uport->irq;
+ && new_info->irq != uport->irq;
/*
* Since changing the 'type' of the port changes its resource
*/
change_port = !(uport->flags & UPF_FIXED_PORT)
&& (new_port != uport->iobase ||
- (unsigned long)new_serial.iomem_base != uport->mapbase ||
- new_serial.hub6 != uport->hub6 ||
- new_serial.io_type != uport->iotype ||
- new_serial.iomem_reg_shift != uport->regshift ||
- new_serial.type != uport->type);
+ (unsigned long)new_info->iomem_base != uport->mapbase ||
+ new_info->hub6 != uport->hub6 ||
+ new_info->io_type != uport->iotype ||
+ new_info->iomem_reg_shift != uport->regshift ||
+ new_info->type != uport->type);
old_flags = uport->flags;
- new_flags = new_serial.flags;
+ new_flags = new_info->flags;
old_custom_divisor = uport->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
retval = -EPERM;
if (change_irq || change_port ||
- (new_serial.baud_base != uport->uartclk / 16) ||
+ (new_info->baud_base != uport->uartclk / 16) ||
(close_delay != port->close_delay) ||
(closing_wait != port->closing_wait) ||
- (new_serial.xmit_fifo_size &&
- new_serial.xmit_fifo_size != uport->fifosize) ||
+ (new_info->xmit_fifo_size &&
+ new_info->xmit_fifo_size != uport->fifosize) ||
(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
uport->flags = ((uport->flags & ~UPF_USR_MASK) |
(new_flags & UPF_USR_MASK));
- uport->custom_divisor = new_serial.custom_divisor;
+ uport->custom_divisor = new_info->custom_divisor;
goto check_and_exit;
}
* Ask the low level driver to verify the settings.
*/
if (uport->ops->verify_port)
- retval = uport->ops->verify_port(uport, &new_serial);
+ retval = uport->ops->verify_port(uport, new_info);
- if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
- (new_serial.baud_base < 9600))
+ if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) ||
+ (new_info->baud_base < 9600))
retval = -EINVAL;
if (retval)
uport->ops->release_port(uport);
uport->iobase = new_port;
- uport->type = new_serial.type;
- uport->hub6 = new_serial.hub6;
- uport->iotype = new_serial.io_type;
- uport->regshift = new_serial.iomem_reg_shift;
- uport->mapbase = (unsigned long)new_serial.iomem_base;
+ uport->type = new_info->type;
+ uport->hub6 = new_info->hub6;
+ uport->iotype = new_info->io_type;
+ uport->regshift = new_info->iomem_reg_shift;
+ uport->mapbase = (unsigned long)new_info->iomem_base;
/*
* Claim and map the new regions
}
if (change_irq)
- uport->irq = new_serial.irq;
+ uport->irq = new_info->irq;
if (!(uport->flags & UPF_FIXED_PORT))
- uport->uartclk = new_serial.baud_base * 16;
+ uport->uartclk = new_info->baud_base * 16;
uport->flags = (uport->flags & ~UPF_CHANGE_MASK) |
(new_flags & UPF_CHANGE_MASK);
- uport->custom_divisor = new_serial.custom_divisor;
+ uport->custom_divisor = new_info->custom_divisor;
port->close_delay = close_delay;
port->closing_wait = closing_wait;
- if (new_serial.xmit_fifo_size)
- uport->fifosize = new_serial.xmit_fifo_size;
+ if (new_info->xmit_fifo_size)
+ uport->fifosize = new_info->xmit_fifo_size;
if (port->tty)
port->tty->low_latency =
(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
} else
retval = uart_startup(tty, state, 1);
exit:
+ return retval;
+}
+
+static int uart_set_info_user(struct tty_struct *tty, struct uart_state *state,
+ struct serial_struct __user *newinfo)
+{
+ struct serial_struct new_serial;
+ struct tty_port *port = &state->port;
+ int retval;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ /*
+ * This semaphore protects port->count. It is also
+ * very useful to prevent opens. Also, take the
+ * port configuration semaphore to make sure that a
+ * module insertion/removal doesn't change anything
+ * under us.
+ */
+ mutex_lock(&port->mutex);
+ retval = uart_set_info(tty, port, state, &new_serial);
mutex_unlock(&port->mutex);
return retval;
}
*/
switch (cmd) {
case TIOCGSERIAL:
- ret = uart_get_info(state, uarg);
+ ret = uart_get_info_user(state, uarg);
break;
case TIOCSSERIAL:
- ret = uart_set_info(tty, state, uarg);
+ ret = uart_set_info_user(tty, state, uarg);
break;
case TIOCSERCONFIG:
struct uart_port *uport = state->uart_port;
if (uport->ops->set_ldisc)
- uport->ops->set_ldisc(uport, tty->termios->c_line);
+ uport->ops->set_ldisc(uport, tty->termios.c_line);
}
static void uart_set_termios(struct tty_struct *tty,
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
/*
*/
#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
if ((cflag ^ old_termios->c_cflag) == 0 &&
- tty->termios->c_ospeed == old_termios->c_ospeed &&
- tty->termios->c_ispeed == old_termios->c_ispeed &&
- RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) {
+ tty->termios.c_ospeed == old_termios->c_ospeed &&
+ tty->termios.c_ispeed == old_termios->c_ispeed &&
+ RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0) {
return;
}
/*
* If that's unset, use the tty termios setting.
*/
- if (port->tty && port->tty->termios && termios.c_cflag == 0)
- termios = *(port->tty->termios);
+ if (port->tty && termios.c_cflag == 0)
+ termios = port->tty->termios;
if (console_suspend_enabled)
uart_change_pm(state, 0);
return p->tty_driver;
}
+static ssize_t uart_get_attr_uartclk(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct tty_port *port = dev_get_drvdata(dev);
+ struct uart_state *state = container_of(port, struct uart_state, port);
+
+ mutex_lock(&state->port.mutex);
+ ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk);
+ mutex_unlock(&state->port.mutex);
+
+ return ret;
+}
+
+static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+
+static struct attribute *tty_dev_attrs[] = {
+ &dev_attr_uartclk.attr,
+ NULL,
+ };
+
+static const struct attribute_group tty_dev_attr_group = {
+ .attrs = tty_dev_attrs,
+ };
+
+static const struct attribute_group *tty_dev_attr_groups[] = {
+ &tty_dev_attr_group,
+ NULL
+ };
+
/**
* uart_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this ports parameters.
*/
- tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
+ tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+ uport->line, uport->dev, port, tty_dev_attr_groups);
if (likely(!IS_ERR(tty_dev))) {
device_set_wakeup_capable(tty_dev, 1);
} else {
uport->icount.cts++;
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
{
- .membase = (void *) KS8695_UART_VA,
- .mapbase = KS8695_UART_VA,
+ .membase = KS8695_UART_VA,
+ .mapbase = KS8695_UART_PA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
.uartclk = KS8695_CLOCK_RATE * 16,
if (res == NULL) {
dev_err(&pdev->dev, "Insufficient resources.\n");
ret = -EFAULT;
- goto irq_err;
+ goto err;
}
port->irq = res->start;
sirfport->p = pinctrl_get_select_default(&pdev->dev);
ret = IS_ERR(sirfport->p);
if (ret)
- goto pin_err;
+ goto err;
}
port->ops = &sirfsoc_uart_ops;
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
-pin_err:
-irq_err:
- devm_iounmap(&pdev->dev, port->membase);
err:
return ret;
}
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
- devm_iounmap(&pdev->dev, port->membase);
uart_remove_one_port(&sirfsoc_uart_drv, port);
return 0;
}
enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
+struct serial_uart_config {
+ char *name;
+ int dfl_xmit_fifo_size;
+ int flags;
+};
+
/*
* Here we define the default xmit fifo size used for each type of UART.
*/
-static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
+static const struct serial_uart_config uart_config[] = {
{ "unknown", 1, 0 },
{ "8250", 1, 0 },
{ "16450", 1, 0 },
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-
+
/* Disable DMAEN (Port 7, Bit 14) */
/* This disconnects the DMA request signal from the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-
+
/* Disable INTEN (Port 6, Bit12) */
/* This disconnects the IRQ request signal to the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
usc_set_serial_signals(info);
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_release_resources(info);
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
- if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+ if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
usc_start_receiver(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals &= ~SerialSignal_RTS;
usc_set_serial_signals(info);
else
mgsl_send_xchar(tty, START_CHAR(tty));
}
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals |= SerialSignal_RTS;
usc_set_serial_signals(info);
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mgsl_start(tty);
}
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
} /* end of block_til_ready() */
+static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct mgsl_struct *info;
+ int line = tty->index;
+
+ /* verify range of specified line number */
+ if (line >= mgsl_device_count) {
+ printk("%s(%d):mgsl_open with invalid line #%d.\n",
+ __FILE__, __LINE__, line);
+ return -ENODEV;
+ }
+
+ /* find the info structure for the specified line */
+ info = mgsl_device_list;
+ while (info && info->line != line)
+ info = info->next_device;
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+ return -ENODEV;
+ tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
/* mgsl_open()
*
* Called when a port is opened. Init and enable port.
*/
static int mgsl_open(struct tty_struct *tty, struct file * filp)
{
- struct mgsl_struct *info;
- int retval, line;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
+ int retval;
- /* verify range of specified line number */
- line = tty->index;
- if (line >= mgsl_device_count) {
- printk("%s(%d):mgsl_open with invalid line #%d.\n",
- __FILE__,__LINE__,line);
- return -ENODEV;
- }
-
- /* find the info structure for the specified line */
- info = mgsl_device_list;
- while(info && info->line != line)
- info = info->next_device;
- if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
- return -ENODEV;
-
- tty->driver_data = info;
info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
} /* end of mgsl_allocate_device()*/
static const struct tty_operations mgsl_ops = {
+ .install = mgsl_install,
.open = mgsl_open,
.close = mgsl_close,
.write = mgsl_write,
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->signals |= SerialSignal_RTS;
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
DBGINFO(("%s throttle\n", info->device_name));
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->signals &= ~SerialSignal_RTS;
set_signals(info);
else
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->signals |= SerialSignal_RTS;
set_signals(info);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (info->port.tty) {
if (info->port.tty->hw_stopped) {
if (info->signals & SerialSignal_CTS) {
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
get_signals(info);
if (info->netcount ||
- (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
+ (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
DBGINFO(("%s change_params\n", info->device_name));
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
port->blocked_open++;
while (1) {
- if ((tty->termios->c_cflag & CBAUD))
+ if ((tty->termios.c_cflag & CBAUD))
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
}
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
}
}
- for (i=0; i < port_count; ++i)
- tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
+ for (i = 0; i < port_count; ++i) {
+ struct slgt_info *info = port_array[i];
+ tty_port_register_device(&info->port, serial_driver, info->line,
+ &info->pdev->dev);
+ }
}
static int __devinit init_one(struct pci_dev *dev,
/* tty callbacks */
-/* Called when a port is opened. Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
+static int install(struct tty_driver *driver, struct tty_struct *tty)
{
SLMP_INFO *info;
- int retval, line;
- unsigned long flags;
+ int line = tty->index;
- line = tty->index;
if (line >= synclinkmp_device_count) {
printk("%s(%d): open with invalid line #%d.\n",
__FILE__,__LINE__,line);
}
info = synclinkmp_device_list;
- while(info && info->line != line)
+ while (info && info->line != line)
info = info->next_device;
if (sanity_check(info, tty->name, "open"))
return -ENODEV;
- if ( info->init_error ) {
+ if (info->init_error) {
printk("%s(%d):%s device is not allocated, init error=%d\n",
- __FILE__,__LINE__,info->device_name,info->init_error);
+ __FILE__, __LINE__, info->device_name,
+ info->init_error);
return -ENODEV;
}
tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
+/* Called when a port is opened. Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+ SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
+ int retval;
+
info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if ( info->port.tty ) {
if (info->port.tty->hw_stopped) {
reset_port(info);
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
get_signals(info);
- if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+ if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s change_params()\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
printk("%s(%d):%s block_til_ready() count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
}
static const struct tty_operations ops = {
+ .install = install,
.open = open,
.close = close,
.write = write,
void free_tty_struct(struct tty_struct *tty)
{
+ if (!tty)
+ return;
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
tty_buffer_free_all(tty);
+ tty->magic = 0xDEADDEAD;
kfree(tty);
}
}
spin_unlock(&redirect_lock);
- tty_lock();
+ tty_lock(tty);
/* some functions below drop BTM, so we need this bit */
set_bit(TTY_HUPPING, &tty->flags);
clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
- tty_unlock();
+ tty_unlock(tty);
if (f)
fput(f);
{
if (tty) {
mutex_lock(&tty->atomic_write_lock);
- tty_lock();
+ tty_lock(tty);
if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
- tty_unlock();
+ tty_unlock(tty);
tty->ops->write(tty, msg, strlen(msg));
} else
- tty_unlock();
+ tty_unlock(tty);
tty_write_unlock(tty);
}
return;
*/
static void tty_line_name(struct tty_driver *driver, int index, char *p)
{
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
+ strcpy(p, driver->name);
+ else
+ sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
/**
struct ktermios *tp;
int idx = tty->index;
- tp = tty->driver->termios[idx];
- if (tp == NULL) {
- tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (tp == NULL)
- return -ENOMEM;
- memcpy(tp, &tty->driver->init_termios,
- sizeof(struct ktermios));
- tty->driver->termios[idx] = tp;
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+ tty->termios = tty->driver->init_termios;
+ else {
+ /* Check for lazy saved data */
+ tp = tty->driver->termios[idx];
+ if (tp != NULL)
+ tty->termios = *tp;
+ else
+ tty->termios = tty->driver->init_termios;
}
- tty->termios = tp;
- tty->termios_locked = tp + 1;
-
/* Compatibility until drivers always set this */
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+ tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
return 0;
}
EXPORT_SYMBOL_GPL(tty_init_termios);
}
initialize_tty_struct(tty, driver, idx);
+ tty_lock(tty);
retval = tty_driver_install_tty(driver, tty);
if (retval < 0)
goto err_deinit_tty;
+ if (!tty->port)
+ tty->port = driver->ports[idx];
+
+ WARN_RATELIMIT(!tty->port,
+ "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
+ __func__, tty->driver->name);
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
retval = tty_ldisc_setup(tty, tty->link);
if (retval)
goto err_release_tty;
+ /* Return the tty locked so that it cannot vanish under the caller */
return tty;
err_deinit_tty:
+ tty_unlock(tty);
deinitialize_tty_struct(tty);
free_tty_struct(tty);
err_module_put:
/* call the tty release_tty routine to clean out this slot */
err_release_tty:
+ tty_unlock(tty);
printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
{
struct ktermios *tp;
int idx = tty->index;
- /* Kill this flag and push into drivers for locking etc */
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* FIXME: Locking on ->termios array */
- tp = tty->termios;
- tty->driver->termios[idx] = NULL;
- kfree(tp);
+
+ /* If the port is going to reset then it has no termios to save */
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+ return;
+
+ /* Stash the termios data */
+ tp = tty->driver->termios[idx];
+ if (tp == NULL) {
+ tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (tp == NULL) {
+ pr_warn("tty: no memory to save termios state.\n");
+ return;
+ }
+ tty->driver->termios[idx] = tp;
}
+ *tp = tty->termios;
}
EXPORT_SYMBOL(tty_free_termios);
-void tty_shutdown(struct tty_struct *tty)
-{
- tty_driver_remove_tty(tty->driver, tty);
- tty_free_termios(tty);
-}
-EXPORT_SYMBOL(tty_shutdown);
/**
* release_one_tty - release tty structure memory
* in use. It also gets called when setup of a device fails.
*
* Locking:
- * tty_mutex - sometimes only
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
*
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
- if (tty->ops->shutdown)
- tty->ops->shutdown(tty);
- else
- tty_shutdown(tty);
-
/* The hangup queue is now free so we can reuse it rather than
waste a chunk of memory for each port */
INIT_WORK(&tty->hangup_work, release_one_tty);
* and decrement the refcount of the backing module.
*
* Locking:
- * tty_mutex - sometimes only
+ * tty_mutex
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
- * FIXME: should we require tty_mutex is held here ??
*
*/
static void release_tty(struct tty_struct *tty, int idx)
{
/* This should always be true but check for the moment */
WARN_ON(tty->index != idx);
+ WARN_ON(!mutex_is_locked(&tty_mutex));
+ if (tty->ops->shutdown)
+ tty->ops->shutdown(tty);
+ tty_free_termios(tty);
+ tty_driver_remove_tty(tty->driver, tty);
if (tty->link)
tty_kref_put(tty->link);
__func__, idx, tty->name);
return -1;
}
- if (tty->termios != tty->driver->termios[idx]) {
- printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n",
- __func__, idx, tty->name);
- return -1;
- }
if (tty->driver->other) {
if (o_tty != tty->driver->other->ttys[idx]) {
printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
__func__, idx, tty->name);
return -1;
}
- if (o_tty->termios != tty->driver->other->termios[idx]) {
- printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n",
- __func__, idx, tty->name);
- return -1;
- }
if (o_tty->link != tty) {
printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
return -1;
if (tty_paranoia_check(tty, inode, __func__))
return 0;
- tty_lock();
+ tty_lock(tty);
check_tty_count(tty, __func__);
__tty_fasync(-1, filp, 0);
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
+ /* Review: parallel close */
o_tty = tty->link;
if (tty_release_checks(tty, o_tty, idx)) {
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
if (tty->ops->close)
tty->ops->close(tty, filp);
- tty_unlock();
+ tty_unlock(tty);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
opens on /dev/tty */
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock_pair(tty, o_tty);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
__func__, tty_name(tty, buf));
- tty_unlock();
+ tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
schedule();
}
* The closing flags are now consistent with the open counts on
* both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
+ *
+ * We must *not* drop the tty_mutex until we ensure that a further
+ * entry into tty_open can not pick up this tty.
*/
if (pty_master) {
if (--o_tty->count < 0) {
}
mutex_unlock(&tty_mutex);
+ tty_unlock_pair(tty, o_tty);
+ /* At this point the TTY_CLOSING flag should ensure a dead tty
+ cannot be re-opened by a racing opener */
/* check whether both sides are closing ... */
- if (!tty_closing || (o_tty && !o_tty_closing)) {
- tty_unlock();
+ if (!tty_closing || (o_tty && !o_tty_closing))
return 0;
- }
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
tty_ldisc_release(tty, o_tty);
/*
* The release_tty function takes care of the details of clearing
- * the slots and preserving the termios structure.
+ * the slots and preserving the termios structure. The tty_unlock_pair
+ * should be safe as we keep a kref while the tty is locked (so the
+ * unlock never unlocks a freed tty).
*/
+ mutex_lock(&tty_mutex);
release_tty(tty, idx);
+ mutex_unlock(&tty_mutex);
/* Make this pty number available for reallocation */
if (devpts)
devpts_kill_index(inode, idx);
- tty_unlock();
return 0;
}
* Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
* tty->count should protect the rest.
* ->siglock protects ->signal/->sighand
+ *
+ * Note: the tty_unlock/lock cases without a ref are only safe due to
+ * tty_mutex
*/
static int tty_open(struct inode *inode, struct file *filp)
retval = 0;
mutex_lock(&tty_mutex);
- tty_lock();
-
+ /* This is protected by the tty_mutex */
tty = tty_open_current_tty(device, filp);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
}
if (tty) {
+ tty_lock(tty);
retval = tty_reopen(tty);
- if (retval)
+ if (retval < 0) {
+ tty_unlock(tty);
tty = ERR_PTR(retval);
- } else
+ }
+ } else /* Returns with the tty_lock held for now */
tty = tty_init_dev(driver, index);
mutex_unlock(&tty_mutex);
if (driver)
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
- tty_unlock();
retval = PTR_ERR(tty);
goto err_file;
}
printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
retval, tty->name);
#endif
- tty_unlock(); /* need to call tty_release without BTM */
+ tty_unlock(tty); /* need to call tty_release without BTM */
tty_release(inode, filp);
if (retval != -ERESTARTSYS)
return retval;
/*
* Need to reset f_op in case a hangup happened.
*/
- tty_lock();
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
- tty_unlock();
goto retry_open;
}
- tty_unlock();
+ tty_unlock(tty);
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock(tty);
spin_lock_irq(¤t->sighand->siglock);
if (!noctty &&
current->signal->leader &&
tty->session == NULL)
__proc_set_tty(current, tty);
spin_unlock_irq(¤t->sighand->siglock);
- tty_unlock();
+ tty_unlock(tty);
mutex_unlock(&tty_mutex);
return 0;
err_unlock:
- tty_unlock();
mutex_unlock(&tty_mutex);
/* after locks to avoid deadlock */
if (!IS_ERR_OR_NULL(driver))
static int tty_fasync(int fd, struct file *filp, int on)
{
+ struct tty_struct *tty = file_tty(filp);
int retval;
- tty_lock();
+
+ tty_lock(tty);
retval = __tty_fasync(fd, filp, on);
- tty_unlock();
+ tty_unlock(tty);
+
return retval;
}
if (ld->ops->ioctl) {
retval = ld->ops->ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
- retval = -EINVAL;
+ retval = -ENOTTY;
}
tty_ldisc_deref(ld);
return retval;
tty->pgrp = NULL;
tty->overrun_time = jiffies;
tty_buffer_init(tty);
+ mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
struct class *tty_class;
+static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
+ unsigned int index, unsigned int count)
+{
+ /* init here, since reused cdevs cause crashes */
+ cdev_init(&driver->cdevs[index], &tty_fops);
+ driver->cdevs[index].owner = driver->owner;
+ return cdev_add(&driver->cdevs[index], dev, count);
+}
+
/**
* tty_register_device - register a tty device
* @driver: the tty driver that describes the tty device
struct device *tty_register_device(struct tty_driver *driver, unsigned index,
struct device *device)
+{
+ return tty_register_device_attr(driver, index, device, NULL, NULL);
+}
+EXPORT_SYMBOL(tty_register_device);
+
+static void tty_device_create_release(struct device *dev)
+{
+ pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
+ kfree(dev);
+}
+
+/**
+ * tty_register_device_attr - register a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
+ * @device: a struct device that is associated with this tty device.
+ * This field is optional, if there is no known struct device
+ * for this tty device it can be set to NULL safely.
+ * @drvdata: Driver data to be set to device.
+ * @attr_grp: Attribute group to be set on device.
+ *
+ * Returns a pointer to the struct device for this tty device
+ * (or ERR_PTR(-EFOO) on error).
+ *
+ * This call is required to be made to register an individual tty device
+ * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
+ * that bit is not set, this function should not be called by a tty
+ * driver.
+ *
+ * Locking: ??
+ */
+struct device *tty_register_device_attr(struct tty_driver *driver,
+ unsigned index, struct device *device,
+ void *drvdata,
+ const struct attribute_group **attr_grp)
{
char name[64];
- dev_t dev = MKDEV(driver->major, driver->minor_start) + index;
+ dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
+ struct device *dev = NULL;
+ int retval = -ENODEV;
+ bool cdev = false;
if (index >= driver->num) {
printk(KERN_ERR "Attempt to register invalid tty line number "
else
tty_line_name(driver, index, name);
- return device_create(tty_class, device, dev, NULL, name);
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ retval = tty_cdev_add(driver, devt, index, 1);
+ if (retval)
+ goto error;
+ cdev = true;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev->devt = devt;
+ dev->class = tty_class;
+ dev->parent = device;
+ dev->release = tty_device_create_release;
+ dev_set_name(dev, "%s", name);
+ dev->groups = attr_grp;
+ dev_set_drvdata(dev, drvdata);
+
+ retval = device_register(dev);
+ if (retval)
+ goto error;
+
+ return dev;
+
+error:
+ put_device(dev);
+ if (cdev)
+ cdev_del(&driver->cdevs[index]);
+ return ERR_PTR(retval);
}
-EXPORT_SYMBOL(tty_register_device);
+EXPORT_SYMBOL_GPL(tty_register_device_attr);
/**
* tty_unregister_device - unregister a tty device
{
device_destroy(tty_class,
MKDEV(driver->major, driver->minor_start) + index);
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC))
+ cdev_del(&driver->cdevs[index]);
}
EXPORT_SYMBOL(tty_unregister_device);
-struct tty_driver *__alloc_tty_driver(int lines, struct module *owner)
+/**
+ * __tty_alloc_driver -- allocate tty driver
+ * @lines: count of lines this driver can handle at most
+ * @owner: module which is repsonsible for this driver
+ * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
+ *
+ * This should not be called directly, some of the provided macros should be
+ * used instead. Use IS_ERR and friends on @retval.
+ */
+struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
+ unsigned long flags)
{
struct tty_driver *driver;
+ unsigned int cdevs = 1;
+ int err;
+
+ if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
+ return ERR_PTR(-EINVAL);
driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
- if (driver) {
- kref_init(&driver->kref);
- driver->magic = TTY_DRIVER_MAGIC;
- driver->num = lines;
- driver->owner = owner;
- /* later we'll move allocation of tables here */
+ if (!driver)
+ return ERR_PTR(-ENOMEM);
+
+ kref_init(&driver->kref);
+ driver->magic = TTY_DRIVER_MAGIC;
+ driver->num = lines;
+ driver->owner = owner;
+ driver->flags = flags;
+
+ if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
+ driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
+ GFP_KERNEL);
+ driver->termios = kcalloc(lines, sizeof(*driver->termios),
+ GFP_KERNEL);
+ if (!driver->ttys || !driver->termios) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
}
+
+ if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ driver->ports = kcalloc(lines, sizeof(*driver->ports),
+ GFP_KERNEL);
+ if (!driver->ports) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
+ cdevs = lines;
+ }
+
+ driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
+ if (!driver->cdevs) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
+
return driver;
+err_free_all:
+ kfree(driver->ports);
+ kfree(driver->ttys);
+ kfree(driver->termios);
+ kfree(driver);
+ return ERR_PTR(err);
}
-EXPORT_SYMBOL(__alloc_tty_driver);
+EXPORT_SYMBOL(__tty_alloc_driver);
static void destruct_tty_driver(struct kref *kref)
{
struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
int i;
struct ktermios *tp;
- void *p;
if (driver->flags & TTY_DRIVER_INSTALLED) {
/*
if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
tty_unregister_device(driver, i);
}
- p = driver->ttys;
proc_tty_unregister_driver(driver);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
- cdev_del(&driver->cdev);
+ if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
+ cdev_del(&driver->cdevs[0]);
}
+ kfree(driver->cdevs);
+ kfree(driver->ports);
+ kfree(driver->termios);
+ kfree(driver->ttys);
kfree(driver);
}
int error;
int i;
dev_t dev;
- void **p = NULL;
struct device *d;
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
- p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
- }
-
if (!driver->major) {
error = alloc_chrdev_region(&dev, driver->minor_start,
driver->num, driver->name);
dev = MKDEV(driver->major, driver->minor_start);
error = register_chrdev_region(dev, driver->num, driver->name);
}
- if (error < 0) {
- kfree(p);
- return error;
- }
+ if (error < 0)
+ goto err;
- if (p) {
- driver->ttys = (struct tty_struct **)p;
- driver->termios = (struct ktermios **)(p + driver->num);
- } else {
- driver->ttys = NULL;
- driver->termios = NULL;
- }
-
- cdev_init(&driver->cdev, &tty_fops);
- driver->cdev.owner = driver->owner;
- error = cdev_add(&driver->cdev, dev, driver->num);
- if (error) {
- unregister_chrdev_region(dev, driver->num);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
- return error;
+ if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
+ error = tty_cdev_add(driver, dev, 0, driver->num);
+ if (error)
+ goto err_unreg_char;
}
mutex_lock(&tty_mutex);
d = tty_register_device(driver, i, NULL);
if (IS_ERR(d)) {
error = PTR_ERR(d);
- goto err;
+ goto err_unreg_devs;
}
}
}
driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
-err:
+err_unreg_devs:
for (i--; i >= 0; i--)
tty_unregister_device(driver, i);
list_del(&driver->tty_drivers);
mutex_unlock(&tty_mutex);
+err_unreg_char:
unregister_chrdev_region(dev, driver->num);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
+err:
return error;
}
-
EXPORT_SYMBOL(tty_register_driver);
/*
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
- tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
+ tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
}
EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
speed_t tty_get_baud_rate(struct tty_struct *tty)
{
- speed_t baud = tty_termios_baud_rate(tty->termios);
+ speed_t baud = tty_termios_baud_rate(&tty->termios);
if (baud == 38400 && tty->alt_speed) {
if (!tty->warned) {
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
mutex_lock(&tty->termios_mutex);
- old_termios = *tty->termios;
- *tty->termios = *new_termios;
- unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
+ old_termios = tty->termios;
+ tty->termios = *new_termios;
+ unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
int extproc = (old_termios.c_lflag & EXTPROC) |
- (tty->termios->c_lflag & EXTPROC);
+ (tty->termios.c_lflag & EXTPROC);
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
if (tty->ops->set_termios)
(*tty->ops->set_termios)(tty, &old_termios);
else
- tty_termios_copy_hw(tty->termios, &old_termios);
+ tty_termios_copy_hw(&tty->termios, &old_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
return retval;
mutex_lock(&tty->termios_mutex);
- memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
+ tmp_termios = tty->termios;
mutex_unlock(&tty->termios_mutex);
if (opt & TERMIOS_TERMIO) {
static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
{
mutex_lock(&tty->termios_mutex);
- memcpy(kterm, tty->termios, sizeof(struct ktermios));
+ *kterm = tty->termios;
mutex_unlock(&tty->termios_mutex);
}
static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
{
mutex_lock(&tty->termios_mutex);
- memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+ *kterm = tty->termios_locked;
mutex_unlock(&tty->termios_mutex);
}
{
int flags = 0;
- if (!(tty->termios->c_lflag & ICANON)) {
- if (tty->termios->c_lflag & ISIG)
+ if (!(tty->termios.c_lflag & ICANON)) {
+ if (tty->termios.c_lflag & ISIG)
flags |= 0x02; /* cbreak */
else
flags |= 0x20; /* raw */
}
- if (tty->termios->c_lflag & ECHO)
+ if (tty->termios.c_lflag & ECHO)
flags |= 0x08; /* echo */
- if (tty->termios->c_oflag & OPOST)
- if (tty->termios->c_oflag & ONLCR)
+ if (tty->termios.c_oflag & OPOST)
+ if (tty->termios.c_oflag & ONLCR)
flags |= 0x10; /* crmod */
return flags;
}
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
- tmp.sg_ispeed = tty->termios->c_ispeed;
- tmp.sg_ospeed = tty->termios->c_ospeed;
- tmp.sg_erase = tty->termios->c_cc[VERASE];
- tmp.sg_kill = tty->termios->c_cc[VKILL];
+ tmp.sg_ispeed = tty->termios.c_ispeed;
+ tmp.sg_ospeed = tty->termios.c_ospeed;
+ tmp.sg_erase = tty->termios.c_cc[VERASE];
+ tmp.sg_kill = tty->termios.c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
mutex_unlock(&tty->termios_mutex);
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- termios = *tty->termios;
+ termios = tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
set_sgflags(&termios, tmp.sg_flags);
struct tchars tmp;
mutex_lock(&tty->termios_mutex);
- tmp.t_intrc = tty->termios->c_cc[VINTR];
- tmp.t_quitc = tty->termios->c_cc[VQUIT];
- tmp.t_startc = tty->termios->c_cc[VSTART];
- tmp.t_stopc = tty->termios->c_cc[VSTOP];
- tmp.t_eofc = tty->termios->c_cc[VEOF];
- tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
+ tmp.t_intrc = tty->termios.c_cc[VINTR];
+ tmp.t_quitc = tty->termios.c_cc[VQUIT];
+ tmp.t_startc = tty->termios.c_cc[VSTART];
+ tmp.t_stopc = tty->termios.c_cc[VSTOP];
+ tmp.t_eofc = tty->termios.c_cc[VEOF];
+ tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- tty->termios->c_cc[VINTR] = tmp.t_intrc;
- tty->termios->c_cc[VQUIT] = tmp.t_quitc;
- tty->termios->c_cc[VSTART] = tmp.t_startc;
- tty->termios->c_cc[VSTOP] = tmp.t_stopc;
- tty->termios->c_cc[VEOF] = tmp.t_eofc;
- tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
+ tty->termios.c_cc[VINTR] = tmp.t_intrc;
+ tty->termios.c_cc[VQUIT] = tmp.t_quitc;
+ tty->termios.c_cc[VSTART] = tmp.t_startc;
+ tty->termios.c_cc[VSTOP] = tmp.t_stopc;
+ tty->termios.c_cc[VEOF] = tmp.t_eofc;
+ tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return 0;
}
struct ltchars tmp;
mutex_lock(&tty->termios_mutex);
- tmp.t_suspc = tty->termios->c_cc[VSUSP];
+ tmp.t_suspc = tty->termios.c_cc[VSUSP];
/* what is dsuspc anyway? */
- tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
- tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
+ tmp.t_dsuspc = tty->termios.c_cc[VSUSP];
+ tmp.t_rprntc = tty->termios.c_cc[VREPRINT];
/* what is flushc anyway? */
- tmp.t_flushc = tty->termios->c_cc[VEOL2];
- tmp.t_werasc = tty->termios->c_cc[VWERASE];
- tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
+ tmp.t_flushc = tty->termios.c_cc[VEOL2];
+ tmp.t_werasc = tty->termios.c_cc[VWERASE];
+ tmp.t_lnextc = tty->termios.c_cc[VLNEXT];
mutex_unlock(&tty->termios_mutex);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- tty->termios->c_cc[VSUSP] = tmp.t_suspc;
+ tty->termios.c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
- tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
- tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
+ tty->termios.c_cc[VEOL2] = tmp.t_dsuspc;
+ tty->termios.c_cc[VREPRINT] = tmp.t_rprntc;
/* what is flushc anyway? */
- tty->termios->c_cc[VEOL2] = tmp.t_flushc;
- tty->termios->c_cc[VWERASE] = tmp.t_werasc;
- tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
+ tty->termios.c_cc[VEOL2] = tmp.t_flushc;
+ tty->termios.c_cc[VWERASE] = tmp.t_werasc;
+ tty->termios.c_cc[VLNEXT] = tmp.t_lnextc;
mutex_unlock(&tty->termios_mutex);
return 0;
}
struct ktermios old;
mutex_lock(&tty->termios_mutex);
- old = *tty->termios;
- tty->termios->c_cflag &= ~CLOCAL;
- tty->termios->c_cflag |= bit;
+ old = tty->termios;
+ tty->termios.c_cflag &= ~CLOCAL;
+ tty->termios.c_cflag |= bit;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old);
- if ((tty->termios->c_cflag & CLOCAL) != bit)
+ if ((tty->termios.c_cflag & CLOCAL) != bit)
ret = -EINVAL;
mutex_unlock(&tty->termios_mutex);
return ret;
(struct termios __user *) arg))
return -EFAULT;
mutex_lock(&real_tty->termios_mutex);
- memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+ real_tty->termios_locked = kterm;
mutex_unlock(&real_tty->termios_mutex);
return 0;
#else
(struct termios __user *) arg))
return -EFAULT;
mutex_lock(&real_tty->termios_mutex);
- memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+ real_tty->termios_locked = kterm;
mutex_unlock(&real_tty->termios_mutex);
return ret;
#endif
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
mutex_lock(&tty->termios_mutex);
- tty->termios->c_line = num;
+ tty->termios.c_line = num;
mutex_unlock(&tty->termios_mutex);
}
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- tty_lock();
+ tty_lock(tty);
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
*/
if (tty->ldisc->ops->num == ldisc) {
- tty_unlock();
+ tty_unlock(tty);
tty_ldisc_put(new_ldisc);
return 0;
}
- tty_unlock();
+ tty_unlock(tty);
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
tty_wait_until_sent(tty, 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/*
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
}
o_ldisc = tty->ldisc;
- tty_unlock();
+ tty_unlock(tty);
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
retval = tty_ldisc_wait_idle(tty, 5 * HZ);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* handle wait idle failure locked */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
- tty_unlock();
+ tty_unlock(tty);
return -EIO;
}
if (o_work)
schedule_work(&o_tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
static void tty_reset_termios(struct tty_struct *tty)
{
mutex_lock(&tty->termios_mutex);
- *tty->termios = tty->driver->init_termios;
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ tty->termios = tty->driver->init_termios;
+ tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+ tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
mutex_unlock(&tty->termios_mutex);
}
* need to wait for another function taking the BTM
*/
clear_bit(TTY_LDISC, &tty->flags);
- tty_unlock();
+ tty_unlock(tty);
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* At this point we have a closed ldisc and we want to
if (atomic_read(&tty->ldisc->users) != 1) {
char cur_n[TASK_COMM_LEN], tty_n[64];
long timeout = 3 * HZ;
- tty_unlock();
+ tty_unlock(tty);
while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
timeout = MAX_SCHEDULE_TIMEOUT;
if (reset == 0) {
- if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+ if (!tty_ldisc_reinit(tty, tty->termios.c_line))
err = tty_ldisc_open(tty, tty->ldisc);
else
err = 1;
tty_ldisc_enable(tty);
return 0;
}
+
+static void tty_ldisc_kill(struct tty_struct *tty)
+{
+ mutex_lock(&tty->ldisc_mutex);
+ /*
+ * Now kill off the ldisc
+ */
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ /* Force an oops if we mess this up */
+ tty->ldisc = NULL;
+
+ /* Ensure the next open requests the N_TTY ldisc */
+ tty_set_termios_ldisc(tty, N_TTY);
+ mutex_unlock(&tty->ldisc_mutex);
+}
+
/**
* tty_ldisc_release - release line discipline
* @tty: tty being shut down
* race with the set_ldisc code path.
*/
- tty_unlock();
+ tty_lock_pair(tty, o_tty);
tty_ldisc_halt(tty);
tty_ldisc_flush_works(tty);
- tty_lock();
-
- mutex_lock(&tty->ldisc_mutex);
- /*
- * Now kill off the ldisc
- */
- tty_ldisc_close(tty, tty->ldisc);
- tty_ldisc_put(tty->ldisc);
- /* Force an oops if we mess this up */
- tty->ldisc = NULL;
-
- /* Ensure the next open requests the N_TTY ldisc */
- tty_set_termios_ldisc(tty, N_TTY);
- mutex_unlock(&tty->ldisc_mutex);
+ if (o_tty) {
+ tty_ldisc_halt(o_tty);
+ tty_ldisc_flush_works(o_tty);
+ }
/* This will need doing differently if we need to lock */
+ tty_ldisc_kill(tty);
+
if (o_tty)
- tty_ldisc_release(o_tty, NULL);
+ tty_ldisc_kill(o_tty);
+ tty_unlock_pair(tty, o_tty);
/* And the memory resources remaining (buffers, termios) will be
disposed of when the kref hits zero */
}
#include <linux/semaphore.h>
#include <linux/sched.h>
-/*
- * The 'big tty mutex'
- *
- * This mutex is taken and released by tty_lock() and tty_unlock(),
- * replacing the older big kernel lock.
- * It can no longer be taken recursively, and does not get
- * released implicitly while sleeping.
- *
- * Don't use in new code.
- */
-static DEFINE_MUTEX(big_tty_mutex);
+/* Legacy tty mutex glue */
+
+enum {
+ TTY_MUTEX_NORMAL,
+ TTY_MUTEX_NESTED,
+};
/*
* Getting the big tty mutex.
*/
-void __lockfunc tty_lock(void)
+
+static void __lockfunc tty_lock_nested(struct tty_struct *tty,
+ unsigned int subclass)
{
- mutex_lock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "L Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ tty_kref_get(tty);
+ mutex_lock_nested(&tty->legacy_mutex, subclass);
+}
+
+void __lockfunc tty_lock(struct tty_struct *tty)
+{
+ return tty_lock_nested(tty, TTY_MUTEX_NORMAL);
}
EXPORT_SYMBOL(tty_lock);
-void __lockfunc tty_unlock(void)
+void __lockfunc tty_unlock(struct tty_struct *tty)
{
- mutex_unlock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "U Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ mutex_unlock(&tty->legacy_mutex);
+ tty_kref_put(tty);
}
EXPORT_SYMBOL(tty_unlock);
+
+/*
+ * Getting the big tty mutex for a pair of ttys with lock ordering
+ * On a non pty/tty pair tty2 can be NULL which is just fine.
+ */
+void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ if (tty < tty2) {
+ tty_lock(tty);
+ tty_lock_nested(tty2, TTY_MUTEX_NESTED);
+ } else {
+ if (tty2 && tty2 != tty)
+ tty_lock(tty2);
+ tty_lock_nested(tty, TTY_MUTEX_NESTED);
+ }
+}
+EXPORT_SYMBOL(tty_lock_pair);
+
+void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ tty_unlock(tty);
+ if (tty2 && tty2 != tty)
+ tty_unlock(tty2);
+}
+EXPORT_SYMBOL(tty_unlock_pair);
}
EXPORT_SYMBOL(tty_port_init);
+/**
+ * tty_port_link_device - link tty and tty_port
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ *
+ * Provide the tty layer wit ha link from a tty (specified by @index) to a
+ * tty_port (@port). Use this only if neither tty_port_register_device nor
+ * tty_port_install is used in the driver. If used, this has to be called before
+ * tty_register_driver.
+ */
+void tty_port_link_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index)
+{
+ if (WARN_ON(index >= driver->num))
+ return;
+ driver->ports[index] = port;
+}
+EXPORT_SYMBOL_GPL(tty_port_link_device);
+
+/**
+ * tty_port_register_device - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ *
+ * It is the same as tty_register_device except the provided @port is linked to
+ * a concrete tty specified by @index. Use this or tty_port_install (or both).
+ * Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device)
+{
+ tty_port_link_device(port, driver, index);
+ return tty_register_device(driver, index, device);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device);
+
+/**
+ * tty_port_register_device_attr - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ * @drvdata: Driver data to be set to device.
+ * @attr_grp: Attribute group to be set on device.
+ *
+ * It is the same as tty_register_device_attr except the provided @port is
+ * linked to a concrete tty specified by @index. Use this or tty_port_install
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device_attr(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp)
+{
+ tty_port_link_device(port, driver, index);
+ return tty_register_device_attr(driver, index, device, drvdata,
+ attr_grp);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device_attr);
+
int tty_port_alloc_xmit_buf(struct tty_port *port)
{
/* We may sleep in get_zeroed_page() */
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(port->close_wait,
+ wait_event_interruptible_tty(tty, port->close_wait,
!(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
}
if (filp->f_flags & O_NONBLOCK) {
/* Indicate we are open */
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
while (1) {
/* Indicate we are open */
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
retval = -ERESTARTSYS;
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
finish_wait(&port->open_wait, &wait);
/* Drop DTR/RTS if HUPCL is set. This causes any attached modem to
hang up the line */
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
tty_port_lower_dtr_rts(port);
/* Don't call port->drop for the last reference. Callers will want
}
EXPORT_SYMBOL(tty_port_close);
+/**
+ * tty_port_install - generic tty->ops->install handler
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @tty: tty to be installed
+ *
+ * It is the same as tty_standard_install except the provided @port is linked
+ * to a concrete tty specified by @tty. Use this or tty_port_register_device
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ tty->port = port;
+ return tty_standard_install(driver, tty);
+}
+EXPORT_SYMBOL_GPL(tty_port_install);
+
int tty_port_open(struct tty_port *port, struct tty_struct *tty,
struct file *filp)
{
static struct input_handler kbd_handler;
static DEFINE_SPINLOCK(kbd_event_lock);
+static DEFINE_SPINLOCK(led_lock);
static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */
static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */
static bool dead_key_next;
if (tty) {
tty_insert_flip_char(tty, ch, 0);
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
}
tty_insert_flip_char(tty, *cp, 0);
cp++;
}
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void applkey(struct vc_data *vc, int key, char mode)
if (!tty)
return;
tty_insert_flip_char(tty, 0, TTY_BREAK);
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void fn_scroll_forw(struct vc_data *vc)
* or (ii) whatever pattern of lights people want to show using KDSETLED,
* or (iii) specified bits of specified words in kernel memory.
*/
-unsigned char getledstate(void)
+static unsigned char getledstate(void)
{
return ledstate;
}
void setledstate(struct kbd_struct *kbd, unsigned int led)
{
unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
if (!(led & ~7)) {
ledioctl = led;
kbd->ledmode = LED_SHOW_IOCTL;
kbd->ledmode = LED_SHOW_FLAGS;
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
}
static inline unsigned char getleds(void)
*/
int vt_get_leds(int console, int flag)
{
- unsigned long flags;
struct kbd_struct * kbd = kbd_table + console;
int ret;
+ unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
ret = vc_kbd_led(kbd, flag);
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
return ret;
}
void vt_kbd_con_start(int console)
{
struct kbd_struct * kbd = kbd_table + console;
-/* unsigned long flags; */
-/* spin_lock_irqsave(&kbd_event_lock, flags); */
+ unsigned long flags;
+ spin_lock_irqsave(&led_lock, flags);
clr_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
-/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
+ spin_unlock_irqrestore(&led_lock, flags);
}
/**
*
* Handle console stop. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
- *
- * FIXME: We eventually need to hold the kbd lock here to protect
- * the LED updating. We can't do it yet because fn_hold calls stop_tty
- * and start_tty under the kbd_event_lock, while normal tty paths
- * don't hold the lock. We probably need to split out an LED lock
- * but not during an -rc release!
*/
void vt_kbd_con_stop(int console)
{
struct kbd_struct * kbd = kbd_table + console;
-/* unsigned long flags; */
-/* spin_lock_irqsave(&kbd_event_lock, flags); */
+ unsigned long flags;
+ spin_lock_irqsave(&led_lock, flags);
set_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
-/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
+ spin_unlock_irqrestore(&led_lock, flags);
}
/*
*/
static void kbd_bh(unsigned long dummy)
{
- unsigned char leds = getleds();
+ unsigned char leds;
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_lock, flags);
+ leds = getleds();
+ spin_unlock_irqrestore(&led_lock, flags);
if (leds != ledstate) {
input_handler_for_each_handle(&kbd_handler, &leds,
return -EPERM;
if (arg & ~0x77)
return -EINVAL;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
kbd->ledflagstate = (arg & 7);
kbd->default_ledflagstate = ((arg >> 4) & 7);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
return 0;
/* the ioctls below only set the lights, not the functions */
clr_vc_kbd_mode(kbd, VC_CRLF);
kbd->lockstate = 0;
kbd->slockstate = 0;
+ spin_lock(&led_lock);
kbd->ledmode = LED_SHOW_FLAGS;
kbd->ledflagstate = kbd->default_ledflagstate;
+ spin_unlock(&led_lock);
/* do not do set_leds here because this causes an endless tasklet loop
when the keyboard hasn't been initialized yet */
spin_unlock_irqrestore(&kbd_event_lock, flags);
static void insert_char(struct vc_data *vc, unsigned int nr)
{
- unsigned short *p, *q = (unsigned short *)vc->vc_pos;
+ unsigned short *p = (unsigned short *) vc->vc_pos;
- p = q + vc->vc_cols - nr - vc->vc_x;
- while (--p >= q)
- scr_writew(scr_readw(p), p + nr);
- scr_memsetw(q, vc->vc_video_erase_char, nr * 2);
+ scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x);
+ scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
vc->vc_need_wrap = 0;
- if (DO_UPDATE(vc)) {
- unsigned short oldattr = vc->vc_attr;
- vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x, vc->vc_y, vc->vc_x + nr, 1,
- vc->vc_cols - vc->vc_x - nr);
- vc->vc_attr = vc->vc_video_erase_char >> 8;
- while (nr--)
- vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y, vc->vc_x + nr);
- vc->vc_attr = oldattr;
- }
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) p,
+ (vc->vc_cols - vc->vc_x) / 2 + 1);
}
static void delete_char(struct vc_data *vc, unsigned int nr)
{
- unsigned int i = vc->vc_x;
- unsigned short *p = (unsigned short *)vc->vc_pos;
+ unsigned short *p = (unsigned short *) vc->vc_pos;
- while (++i <= vc->vc_cols - nr) {
- scr_writew(scr_readw(p+nr), p);
- p++;
- }
- scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
+ scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr);
+ scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
+ nr * 2);
vc->vc_need_wrap = 0;
- if (DO_UPDATE(vc)) {
- unsigned short oldattr = vc->vc_attr;
- vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x + nr, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x - nr);
- vc->vc_attr = vc->vc_video_erase_char >> 8;
- while (nr--)
- vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y,
- vc->vc_cols - 1 - nr);
- vc->vc_attr = oldattr;
- }
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) p,
+ (vc->vc_cols - vc->vc_x) / 2);
}
static int softcursor_original;
case 0: /* erase from cursor to end of display */
count = (vc->vc_scr_end - vc->vc_pos) >> 1;
start = (unsigned short *)vc->vc_pos;
- if (DO_UPDATE(vc)) {
- /* do in two stages */
- vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x);
- vc->vc_sw->con_clear(vc, vc->vc_y + 1, 0,
- vc->vc_rows - vc->vc_y - 1,
- vc->vc_cols);
- }
break;
case 1: /* erase from start to cursor */
count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
start = (unsigned short *)vc->vc_origin;
- if (DO_UPDATE(vc)) {
- /* do in two stages */
- vc->vc_sw->con_clear(vc, 0, 0, vc->vc_y,
- vc->vc_cols);
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_x + 1);
- }
break;
case 3: /* erase scroll-back buffer (and whole display) */
scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
vc->vc_screenbuf_size >> 1);
set_origin(vc);
- if (CON_IS_VISIBLE(vc))
- update_screen(vc);
/* fall through */
case 2: /* erase whole display */
count = vc->vc_cols * vc->vc_rows;
start = (unsigned short *)vc->vc_origin;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, 0, 0,
- vc->vc_rows,
- vc->vc_cols);
break;
default:
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) start, count);
vc->vc_need_wrap = 0;
}
case 0: /* erase from cursor to end of line */
count = vc->vc_cols - vc->vc_x;
start = (unsigned short *)vc->vc_pos;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x);
break;
case 1: /* erase from start of line to cursor */
start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
count = vc->vc_x + 1;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_x + 1);
break;
case 2: /* erase whole line */
start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
count = vc->vc_cols;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_cols);
break;
default:
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
vc->vc_need_wrap = 0;
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) start, count);
}
static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */
tty_insert_flip_char(tty, *p, 0);
p++;
}
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void cursor_report(struct vc_data *vc, struct tty_struct *tty)
/*
* Allocate the console screen memory.
*/
-static int con_open(struct tty_struct *tty, struct file *filp)
+static int con_install(struct tty_driver *driver, struct tty_struct *tty)
{
unsigned int currcons = tty->index;
- int ret = 0;
+ struct vc_data *vc;
+ int ret;
console_lock();
- if (tty->driver_data == NULL) {
- ret = vc_allocate(currcons);
- if (ret == 0) {
- struct vc_data *vc = vc_cons[currcons].d;
+ ret = vc_allocate(currcons);
+ if (ret)
+ goto unlock;
- /* Still being freed */
- if (vc->port.tty) {
- console_unlock();
- return -ERESTARTSYS;
- }
- tty->driver_data = vc;
- vc->port.tty = tty;
+ vc = vc_cons[currcons].d;
- if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
- tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
- tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
- }
- if (vc->vc_utf)
- tty->termios->c_iflag |= IUTF8;
- else
- tty->termios->c_iflag &= ~IUTF8;
- console_unlock();
- return ret;
- }
+ /* Still being freed */
+ if (vc->port.tty) {
+ ret = -ERESTARTSYS;
+ goto unlock;
}
+
+ ret = tty_port_install(&vc->port, driver, tty);
+ if (ret)
+ goto unlock;
+
+ tty->driver_data = vc;
+ vc->port.tty = tty;
+
+ if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+ tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
+ tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
+ }
+ if (vc->vc_utf)
+ tty->termios.c_iflag |= IUTF8;
+ else
+ tty->termios.c_iflag &= ~IUTF8;
+unlock:
console_unlock();
return ret;
}
+static int con_open(struct tty_struct *tty, struct file *filp)
+{
+ /* everything done in install */
+ return 0;
+}
+
+
static void con_close(struct tty_struct *tty, struct file *filp)
{
/* Nothing to do - we defer to shutdown */
console_lock();
vc->port.tty = NULL;
console_unlock();
- tty_shutdown(tty);
}
static int default_italic_color = 2; // green (ASCII)
console_initcall(con_init);
static const struct tty_operations con_ops = {
+ .install = con_install,
.open = con_open,
.close = con_close,
.write = con_write,
default y if PXA3xx
default y if ARCH_EP93XX
default y if ARCH_AT91
- default y if ARCH_PNX4008
default y if MFD_TC6393XB
default y if ARCH_W90X900
default y if ARCH_DAVINCI_DA8XX
}
/**
- * hw_device_state: enables/disables interrupts & starts/stops device (execute
- * without interruption)
+ * hw_device_state: enables/disables interrupts (execute without interruption)
* @dma: 0 => disable, !0 => enable and set dma engine
*
* This function returns an error code
/* interrupt, error, port change, reset, sleep/suspend */
hw_write(ci, OP_USBINTR, ~0,
USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
- hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
} else {
- hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
hw_write(ci, OP_USBINTR, ~0, 0);
}
return 0;
{
struct ci13xxx_req *mReq, *mReqTemp;
struct ci13xxx_ep *mEpTemp = mEp;
- int uninitialized_var(retval);
-
- if (list_empty(&mEp->qh.queue))
- return -EINVAL;
+ int retval = 0;
list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
queue) {
return -ENOTSUPP;
}
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+
+ if (is_on)
+ hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+ else
+ hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+ return 0;
+}
+
static int ci13xxx_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int ci13xxx_stop(struct usb_gadget *gadget,
static const struct usb_gadget_ops usb_gadget_ops = {
.vbus_session = ci13xxx_vbus_session,
.wakeup = ci13xxx_wakeup,
+ .pullup = ci13xxx_pullup,
.vbus_draw = ci13xxx_vbus_draw,
.udc_start = ci13xxx_start,
.udc_stop = ci13xxx_stop,
mEp->ep.name = mEp->name;
mEp->ep.ops = &usb_ep_ops;
- mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ /*
+ * for ep0: maxP defined in desc, for other
+ * eps, maxP is set by epautoconfig() called
+ * by gadget layer
+ */
+ mEp->ep.maxpacket = (unsigned short)~0;
INIT_LIST_HEAD(&mEp->qh.queue);
mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
else
ci->ep0in = mEp;
+ mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
continue;
}
return retval;
}
+static void destroy_eps(struct ci13xxx *ci)
+{
+ int i;
+
+ for (i = 0; i < ci->hw_ep_max; i++) {
+ struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+
+ dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+ }
+}
+
/**
* ci13xxx_start: register a gadget driver
* @gadget: our gadget
if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (ci->transceiver == NULL) {
retval = -ENODEV;
- goto free_pools;
+ goto destroy_eps;
}
}
remove_trans:
if (!IS_ERR_OR_NULL(ci->transceiver)) {
- otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+ otg_set_peripheral(ci->transceiver->otg, NULL);
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
put_transceiver:
if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
usb_put_phy(ci->transceiver);
+destroy_eps:
+ destroy_eps(ci);
free_pools:
dma_pool_destroy(ci->td_pool);
free_qh_pool:
*/
static void udc_stop(struct ci13xxx *ci)
{
- int i;
-
if (ci == NULL)
return;
usb_del_gadget_udc(&ci->gadget);
- for (i = 0; i < ci->hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
-
- dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
- }
+ destroy_eps(ci);
dma_pool_destroy(ci->td_pool);
dma_pool_destroy(ci->qh_pool);
struct ktermios *termios_old)
{
struct acm *acm = tty->driver_data;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
struct usb_cdc_line_coding newline;
int newctrl = acm->ctrlout;
usb_set_intfdata(data_interface, acm);
usb_get_intf(control_interface);
- tty_register_device(acm_tty_driver, minor, &control_interface->dev);
+ tty_port_register_device(&acm->port, acm_tty_driver, minor,
+ &control_interface->dev);
return 0;
alloc_fail7:
/* return intfdata if we own the interface, else look up intf in the list */
static struct wdm_device *wdm_find_device(struct usb_interface *intf)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf == intf)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
static struct wdm_device *wdm_find_device_by_minor(int minor)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf->minor == minor)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Microchip Joss Optical infrared touchboard device */
+ { USB_DEVICE(0x04d8, 0x000c), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
dev_err(dev, "missing IRQ\n");
return -ENODEV;
}
- dwc->xhci_resources[1] = *res;
+ dwc->xhci_resources[1].start = res->start;
+ dwc->xhci_resources[1].end = res->end;
+ dwc->xhci_resources[1].flags = res->flags;
+ dwc->xhci_resources[1].name = res->name;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
return -ENODEV;
}
- dwc->xhci_resources[0] = *res;
+ dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
+ dwc->xhci_resources[0].flags = res->flags;
+ dwc->xhci_resources[0].name = res->name;
/*
* Request memory region but exclude xHCI regs,
transferred = min_t(u32, ur->length,
transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
- dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
}
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+ if (dwc->ep0_bounced && dep->number == 0)
+ dwc->ep0_bounced = false;
+ else
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
req, dep->name, req->request.actual,
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
dep->name);
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
return;
}
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
int ret;
+ /*
+ * If xfernotready is already elapsed and it is a case
+ * of isoc transfer, then issue END TRANSFER, so that
+ * you can receive xfernotready again and can have
+ * notion of current microframe.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ dwc3_stop_active_transfer(dwc, dep->number);
+ return 0;
+ }
+
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
if (ret && ret != -EBUSY) {
struct dwc3 *dwc = dep->dwc;
unsigned long flags;
if (!_ep || !ep
- || !desc || ep->ep.desc
- || _ep->name == ep0name
+ || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| (maxpacket = usb_endpoint_maxp(desc)) == 0
|| maxpacket > ep->maxpacket) {
tmp |= AT91_UDP_EPEDS;
__raw_writel(tmp, ep->creg);
- ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
/*
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
udc->gadget.dev.of_node = udc->pdev->dev.of_node;
- dev_set_drvdata(&udc->gadget.dev, &driver->driver);
udc->enabled = 1;
udc->selfpowered = 1;
spin_unlock_irqrestore(&udc->lock, flags);
udc->gadget.dev.driver = NULL;
- dev_set_drvdata(&udc->gadget.dev, NULL);
udc->driver = NULL;
DBG("unbound from %s\n", driver->driver.name);
return retval;
}
+/* usb 3.0 root hub device descriptor */
+struct {
+ struct usb_bos_descriptor bos;
+ struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+ .bos = {
+ .bLength = USB_DT_BOS_SIZE,
+ .bDescriptorType = USB_DT_BOS,
+ .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
+ .bNumDeviceCaps = 1,
+ },
+ .ss_cap = {
+ .bLength = USB_DT_USB_SS_CAP_SIZE,
+ .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+ .bDevCapabilityType = USB_SS_CAP_TYPE,
+ .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
+ .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
+ },
+};
+
static inline void
ss_hub_descriptor(struct usb_hub_descriptor *desc)
{
else
hub_descriptor((struct usb_hub_descriptor *) buf);
break;
+
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ if ((wValue >> 8) != USB_DT_BOS)
+ goto error;
+
+ memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+ retval = sizeof(usb3_bos_desc);
+ break;
+
case GetHubStatus:
*(__le32 *) buf = cpu_to_le32(0);
break;
hs_hcd->has_tt = 1;
retval = usb_add_hcd(hs_hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd(hs_hcd);
- return retval;
- }
+ if (retval)
+ goto put_usb2_hcd;
if (mod_data.is_super_speed) {
ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
put_usb3_hcd:
usb_put_hcd(ss_hcd);
dealloc_usb2_hcd:
+ usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
usb_put_hcd(hs_hcd);
the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
/* Debugging ****************************************************************/
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
# define pr_vdebug pr_debug
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) \
print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
#else
+#ifndef pr_vdebug
# define pr_vdebug(...) do { } while (0)
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) do { } while (0)
#endif /* VERBOSE_DEBUG */
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
#include <mach/hardware.h>
#include "imx_udc.h"
IRQF_SHARED, driver_name, udc);
if (retval != 0) {
dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
- driver_name, IRQ_USB, retval);
+ driver_name, udc->irq, retval);
goto err_irq;
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (hsotg->num_of_eps == 0) {
dev_err(dev, "wrong number of EPs (zero)\n");
+ ret = -EINVAL;
goto err_supplies;
}
GFP_KERNEL);
if (!eps) {
dev_err(dev, "cannot get memory\n");
+ ret = -ENOMEM;
goto err_supplies;
}
GFP_KERNEL);
if (!hsotg->ctrl_req) {
dev_err(dev, "failed to allocate ctrl req\n");
+ ret = -ENOMEM;
goto err_ep_mem;
}
#include <mach/hardware.h>
#include <plat/regs-udc.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include "s3c2410_udc.h"
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
pr_debug(fmt, ##arg)
+#endif /* pr_vdebug */
#else
+#ifndef pr_vdebig
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
+#endif /* pr_vdebug */
#endif
/*-------------------------------------------------------------------------*/
for (i = 0; i < count; i++) {
struct device *tty_dev;
- tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+ tty_dev = tty_port_register_device(&ports[i].port->port,
+ gs_tty_driver, i, &g->dev);
if (IS_ERR(tty_dev))
pr_warning("%s: no classdev for port %d, err %ld\n",
__func__, i, PTR_ERR(tty_dev));
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
select USB_OTG_UTILS if ARCH_OMAP
- select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008
+ select USB_ISP1301 if ARCH_LPC32XX
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
#include <linux/clk.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
else {
qtd = list_entry (qh->qtd_list.next,
struct ehci_qtd, qtd_list);
- /* first qtd may already be partially processed */
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+ /*
+ * first qtd may already be partially processed.
+ * If we come here during unlink, the QH overlay region
+ * might have reference to the just unlinked qtd. The
+ * qtd is updated in qh_completions(). Update the QH
+ * overlay here.
+ */
+ if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
+ }
}
if (qtd)
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/of_gpio.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/usb-phy.h>
#define EHCI_INSNREG00(base) (base + 0x90)
#ifndef __LINUX_IMX21_HCD_H__
#define __LINUX_IMX21_HCD_H__
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
#define NUM_ISO_ETDS 2
#define USB_NUM_ETD 32
if (pdata) {
at91_for_each_port(i) {
+ /*
+ * do not configure PIO if not in relation with
+ * real USB port on board
+ */
+ if (i >= pdata->ports) {
+ pdata->vbus_pin[i] = -EINVAL;
+ pdata->overcurrent_pin[i] = -EINVAL;
+ break;
+ }
+
if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
gpio = pdata->vbus_pin[i];
#include <linux/clk.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#ifndef CONFIG_ARCH_DAVINCI_DA8XX
#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
#define PLATFORM_DRIVER ohci_hcd_at91_driver
#endif
-#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
+#ifdef CONFIG_ARCH_LPC32XX
#include "ohci-nxp.c"
#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif
* driver for NXP USB Host devices
*
* Currently supported OHCI host devices:
- * - Philips PNX4008
* - NXP LPC32xx
*
* Authors: Dmitry Chigirev <source@mvista.com>
static struct clk *usb_dev_clk;
static struct clk *usb_otg_clk;
-static void isp1301_configure_pnx4008(void)
-{
- /* PNX4008 only supports DAT_SE0 USB mode */
- /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
- /* Power up externel charge-pump */
-
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC1_DAT_SE0 | MC1_SPEED_REG));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2,
- MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
-}
-
static void isp1301_configure_lpc32xx(void)
{
/* LPC32XX only supports DAT_SE0 USB mode */
static void isp1301_configure(void)
{
- if (machine_is_pnx4008())
- isp1301_configure_pnx4008();
- else
- isp1301_configure_lpc32xx();
+ isp1301_configure_lpc32xx();
}
static inline void isp1301_vbus_on(void)
.start_port_reset = ohci_start_port_reset,
};
-static void nxp_set_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
- start_int_ack(SE_USB_OTG_ATX_INT_N);
- start_int_umask(SE_USB_OTG_ATX_INT_N);
-
- start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
- start_int_ack(SE_USB_OTG_TIMER_INT);
- start_int_umask(SE_USB_OTG_TIMER_INT);
-
- start_int_set_rising_edge(SE_USB_I2C_INT);
- start_int_ack(SE_USB_I2C_INT);
- start_int_umask(SE_USB_I2C_INT);
-
- start_int_set_rising_edge(SE_USB_INT);
- start_int_ack(SE_USB_INT);
- start_int_umask(SE_USB_INT);
-
- start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
- start_int_ack(SE_USB_NEED_CLK_INT);
- start_int_umask(SE_USB_NEED_CLK_INT);
-
- start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
- start_int_ack(SE_USB_AHB_NEED_CLK_INT);
- start_int_umask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
-static void nxp_unset_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_mask(SE_USB_OTG_ATX_INT_N);
- start_int_mask(SE_USB_OTG_TIMER_INT);
- start_int_mask(SE_USB_I2C_INT);
- start_int_mask(SE_USB_INT);
- start_int_mask(SE_USB_NEED_CLK_INT);
- start_int_mask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
goto out8;
}
- /* Set all USB bits in the Start Enable register */
- nxp_set_usb_bits();
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get MEM resource\n");
nxp_stop_hc();
out8:
- nxp_unset_usb_bits();
usb_put_hcd(hcd);
out7:
clk_disable(usb_otg_clk);
nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- nxp_unset_usb_bits();
clk_disable(usb_pll_clk);
clk_put(usb_pll_clk);
clk_disable(usb_dev_clk);
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <mach/hardware.h>
-#include <mach/ohci.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
/*
* UHC: USB Host Controller (OHCI-like) register definitions
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
#define NB_PIF0_PWRDOWN_1 0x01100013
#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
static struct amd_chipset_info {
struct pci_dev *nb_dev;
return;
}
- ports_available = 0xffffffff;
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);
- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
void __iomem *op_reg_base;
u32 val;
int timeout;
+ int len = pci_resource_len(pdev, 0);
if (!mmio_resource_enabled(pdev, 0))
return;
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ base = ioremap_nocache(pci_resource_start(pdev, 0), len);
if (base == NULL)
return;
*/
ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
do {
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev,
+ "xHCI controller failing to respond");
+ return;
+ }
+
if (!ext_cap_offset)
/* We've reached the end of the extended capabilities */
goto hc_init;
+
val = readl(base + ext_cap_offset);
if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
break;
/* Disable any BIOS SMIs and clear all SMI events*/
writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+hc_init:
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
-hc_init:
+
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* Wait for the host controller to be ready before writing any
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
goto put_hcd;
}
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include "xhci.h"
#endif
+static void compliance_mode_recovery(unsigned long arg)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ u32 temp;
+ int i;
+
+ xhci = (struct xhci_hcd *)arg;
+
+ for (i = 0; i < xhci->num_usb3_ports; i++) {
+ temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /*
+ * Compliance Mode Detected. Letting USB Core
+ * handle the Warm Reset
+ */
+ xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+ i + 1);
+ xhci_dbg(xhci, "Attempting Recovery routine!\n");
+ hcd = xhci->shared_hcd;
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+ mod_timer(&xhci->comp_mode_recovery_timer,
+ jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ init_timer(&xhci->comp_mode_recovery_timer);
+
+ xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+ xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ xhci->comp_mode_recovery_timer.expires = jiffies +
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+ set_timer_slack(&xhci->comp_mode_recovery_timer,
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+ if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+ return false;
+
+ if (strstr(dmi_product_name, "Z420") ||
+ strstr(dmi_product_name, "Z620") ||
+ strstr(dmi_product_name, "Z820"))
+ return true;
+
+ return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+ return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
return retval;
}
del_timer_sync(&xhci->event_ring_timer);
#endif
+ /* Deleting Compliance Mode Recovery Timer */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci))))
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_dev_put();
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+ if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
spin_lock_irq(&xhci->lock);
}
spin_unlock_irq(&xhci->lock);
+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+ }
+
/* step 5: remove core well power */
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
}
+
+ /*
+ * If system is subject to the Quirk, Compliance Mode Timer needs to
+ * be re-initialized Always after a system resume. Ports are subject
+ * to suffer the Compliance Mode issue again. It doesn't matter if
+ * ports have entered previously to U0 before system's suspension.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ compliance_mode_recovery_timer_init(xhci);
+
return retval;
}
#endif /* CONFIG_PM */
#define XHCI_LPM_SUPPORT (1 << 11)
#define XHCI_INTEL_HOST (1 << 12)
#define XHCI_SPURIOUS_REBOOT (1 << 13)
+#define XHCI_COMP_MODE_QUIRK (1 << 14)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
#include <linux/dma-mapping.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#include "musb_core.h"
* we only have work to do in the former case.
*/
spin_lock_irqsave(&musb->lock, flags);
- if (hep->hcpriv) {
+ if (hep->hcpriv || !next_urb(qh)) {
/* some concurrent activity submitted another urb to hep...
* odd, rare, error prone, but legal.
*/
struct platform_device *pdev = to_platform_device(dev);
int irq = platform_get_irq_byname(pdev, "dma");
- if (irq == 0) {
+ if (irq <= 0) {
dev_err(dev, "No DMA interrupt line!\n");
return NULL;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err1;
+ goto err2;
}
return 0;
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include "musb_core.h"
#include "tusb6010.h"
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/pfn.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
struct ux500_dma_channel {
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
usbhs_pipe_is_dcp(pipe))
goto usbhsf_pio_prepare_push;
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_push;
if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
/* use PIO if packet is less than pio_dma_border */
len = usbhsf_fifo_rcv_len(priv, fifo);
len = min(pkt->length - pkt->actual, len);
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_pop_unselect;
if (len < usbhs_get_dparam(priv, pio_dma_border))
static void ark3116_init_termios(struct tty_struct *tty)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
*termios = tty_std_termios;
termios->c_cflag = B9600 | CS8
| CREAD | HUPCL | CLOCAL;
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
int bps = tty_get_baud_rate(tty);
int quot;
unsigned long control_state;
int bad_flow_control;
speed_t baud;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
iflag = termios->c_iflag;
cflag = termios->c_cflag;
}
if (serial->type->set_termios) {
- tty->termios->c_cflag = cflag;
- tty_termios_encode_baud_rate(tty->termios, baud, baud);
+ tty->termios.c_cflag = cflag;
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
memset(&dummy, 0, sizeof(struct ktermios));
serial->type->set_termios(tty, port, &dummy);
if (tty) {
cp210x_get_termios_port(tty->driver_data,
- &tty->termios->c_cflag, &baud);
+ &tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
}
{
u32 baud;
- baud = tty->termios->c_ospeed;
+ baud = tty->termios.c_ospeed;
/* This maps the requested rate to a rate valid on cp2102 or cp2103,
* or to an arbitrary rate in [1M,2M].
if (!tty)
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
old_cflag = old_termios->c_cflag;
- if (tty->termios->c_ospeed != old_termios->c_ospeed)
+ if (tty->termios.c_ospeed != old_termios->c_ospeed)
cp210x_change_speed(tty, port, old_termios);
/* If the number of data bits is to be updated */
early enough */
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 4800;
- tty->termios->c_ospeed = 4800;
+ tty->termios.c_ispeed = 4800;
+ tty->termios.c_ospeed = 4800;
} else if (priv->chiptype == CT_CYPHIDCOM) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
} else if (priv->chiptype == CT_CA42V2) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
}
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* Unsupported features need clearing */
- tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
+ tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* check if there are new settings */
if (old_termios) {
spin_lock_irqsave(&priv->lock, flags);
- priv->tmp_termios = *(tty->termios);
+ priv->tmp_termios = tty->termios;
spin_unlock_irqrestore(&priv->lock, flags);
}
"4800bps.");
/* define custom termios settings for NMEA protocol */
- tty->termios->c_iflag /* input modes - */
+ tty->termios.c_iflag /* input modes - */
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
| ICRNL /* disable translate CR to NL */
| IXON); /* disable enable XON/XOFF flow control */
- tty->termios->c_oflag /* output modes */
+ tty->termios.c_oflag /* output modes */
&= ~OPOST; /* disable postprocess output char */
- tty->termios->c_lflag /* line discipline modes */
+ tty->termios.c_lflag /* line discipline modes */
&= ~(ECHO /* disable echo input characters */
| ECHONL /* disable echo new line */
| ICANON /* disable erase, kill, werase, and rprnt
/* hangup, as defined in acm.c... this might be a bad place for it
* though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ if (tty && !(tty->termios.c_cflag & CLOCAL) &&
!(priv->current_status & UART_CD)) {
dbg("%s - calling hangup", __func__);
tty_hangup(tty);
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct digi_port *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int iflag = tty->termios.c_iflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_iflag = old_termios->c_iflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned char buf[32];
/* don't set RTS if using hardware flow control */
/* and throttling input */
modem_signals = TIOCM_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags))
modem_signals |= TIOCM_RTS;
digi_set_modem_signals(port, modem_signals, 1);
}
}
/* set parity */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
if (cflag&PARENB) {
/* set termios settings */
if (tty) {
- not_termios.c_cflag = ~tty->termios->c_cflag;
- not_termios.c_iflag = ~tty->termios->c_iflag;
+ not_termios.c_cflag = ~tty->termios.c_cflag;
+ not_termios.c_iflag = ~tty->termios.c_iflag;
digi_set_termios(tty, port, ¬_termios);
}
return 0;
rts = 0;
if (tty)
- rts = tty->termios->c_cflag & CRTSCTS;
+ rts = tty->termios.c_cflag & CRTSCTS;
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
static void empeg_init_termios(struct tty_struct *tty)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
/*
* The empeg-car player wants these particular tty settings.
/* FIXME - Stubbed out for now */
/* Don't change anything if nothing has changed */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
/* Do the real work here... */
+ tty_termios_copy_hw(&tty->termios, old_termios);
}
static int f81232_tiocmget(struct tty_struct *tty)
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0x00) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+ { USB_DEVICE(PI_VID, PI_C866_PID) },
+ { USB_DEVICE(PI_VID, PI_C663_PID) },
+ { USB_DEVICE(PI_VID, PI_C725_PID) },
+ { USB_DEVICE(PI_VID, PI_E517_PID) },
+ { USB_DEVICE(PI_VID, PI_C863_PID) },
{ USB_DEVICE(PI_VID, PI_E861_PID) },
+ { USB_DEVICE(PI_VID, PI_C867_PID) },
+ { USB_DEVICE(PI_VID, PI_E609_PID) },
+ { USB_DEVICE(PI_VID, PI_E709_PID) },
+ { USB_DEVICE(PI_VID, PI_100F_PID) },
+ { USB_DEVICE(PI_VID, PI_1011_PID) },
+ { USB_DEVICE(PI_VID, PI_1012_PID) },
+ { USB_DEVICE(PI_VID, PI_1013_PID) },
+ { USB_DEVICE(PI_VID, PI_1014_PID) },
+ { USB_DEVICE(PI_VID, PI_1015_PID) },
+ { USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
{
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
#define FTDI_OPENDCC_GBM_PID 0xBFDC
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
+
/*
* RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
*/
/*
* Microchip Technology, Inc.
*
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications. The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
* Hornby Elite - Digital Command Control Console
* http://www.hornby.com/hornby-dcc/controllers/
*/
* Physik Instrumente
* http://www.physikinstrumente.com/en/products/
*/
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */
+
#define PI_VID 0x1a72 /* Vendor ID */
-#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */
+#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
+#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID 0x1007 /* PI C-863 */
+#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */
+#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */
+#define PI_1012_PID 0x1012 /* PI Motion Controller */
+#define PI_1013_PID 0x1013 /* PI Motion Controller */
+#define PI_1014_PID 0x1014 /* PI Device */
+#define PI_1015_PID 0x1015 /* PI Device */
+#define PI_1016_PID 0x1016 /* PI Digital Servo Module */
/*
* Kondo Kagaku Co.Ltd.
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
edge_port->shadowMCR &= ~MCR_RTS;
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
edge_port->shadowMCR |= MCR_RTS;
send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
+ tty->termios.c_cflag, tty->termios.c_iflag);
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
tty = tty_port_tty_get(&edge_port->port->port);
if (tty) {
change_port_settings(tty,
- edge_port, tty->termios);
+ edge_port, &tty->termios);
tty_kref_put(tty);
}
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
switch (cflag & CSIZE) {
case CS5:
/* set up the port settings */
if (tty)
- edge_set_termios(tty, port, tty->termios);
+ edge_set_termios(tty, port, &tty->termios);
/* open up the port */
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- *tty->termios = *old_termios;
+ tty->termios = *old_termios;
dev_err(&edge_port->port->dev, "%s - out of memory\n",
__func__);
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
config->wFlags = 0;
} else
dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
/* Round the baud rate */
baud = tty_get_baud_rate(tty);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
+ tty->termios.c_cflag, tty->termios.c_iflag);
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
dbg("%s - port %d", __func__, port->number);
ir_xbof = ir_xbof_change(xbof) ;
/* Only speed changes are supported */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
tty_encode_baud_rate(tty, baud, baud);
/*
{
const u32 supported_mask = CMSPAR|PARENB|PARODD;
struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
int status;
u32 actual;
u32 parity;
u32 newval = cflag & supported_mask;
/* Just use the ospeed. ispeed should be the same. */
- baud = tty->termios->c_ospeed;
+ baud = tty->termios.c_ospeed;
dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
* settings back over and then adjust them
*/
if (old_termios)
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
if (status != 0) /* Set failed - return old bits */
return;
/* Re-encode speed, parity and csize */
tty_encode_baud_rate(tty, baud, baud);
- tty->termios->c_cflag &= ~(supported_mask|CSIZE);
- tty->termios->c_cflag |= newval | csize;
+ tty->termios.c_cflag &= ~(supported_mask|CSIZE);
+ tty->termios.c_cflag |= newval | csize;
}
static void iuu_close(struct usb_serial_port *port)
static void iuu_init_termios(struct tty_struct *tty)
{
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600
| TIOCM_CTS | CSTOPB | PARENB;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- tty->termios->c_lflag = 0;
- tty->termios->c_oflag = 0;
- tty->termios->c_iflag = 0;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
+ tty->termios.c_lflag = 0;
+ tty->termios.c_oflag = 0;
+ tty->termios.c_iflag = 0;
}
static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
u32 actual;
struct iuu_private *priv = usb_get_serial_port_data(port);
- baud = tty->termios->c_ospeed;
- tty->termios->c_ispeed = baud;
+ baud = tty->termios.c_ospeed;
+ tty->termios.c_ispeed = baud;
/* Re-encode speed */
tty_encode_baud_rate(tty, baud, baud);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
device_port = port->number - port->serial->minor;
/* Baud rate calculation takes baud rate as an integer
p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
/* Mark/Space not supported */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
keyspan_send_setup(port, 0);
}
device_port = port->number - port->serial->minor;
if (tty) {
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Baud rate calculation takes baud rate as an integer
so other rates can be generated if desired. */
baud_rate = tty_get_baud_rate(tty);
7[EOMS]1: 10 bit, b0/b7 is parity
7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
- HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
+ HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
bit.
For now, just do baud. */
}
/* Only speed can change so copy the old h/w parameters
then encode the new speed */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
tty_encode_baud_rate(tty, speed, speed);
}
/* set up termios structure */
spin_lock_irqsave(&priv->lock, flags);
- priv->termios.c_iflag = tty->termios->c_iflag;
- priv->termios.c_oflag = tty->termios->c_oflag;
- priv->termios.c_cflag = tty->termios->c_cflag;
- priv->termios.c_lflag = tty->termios->c_lflag;
+ priv->termios.c_iflag = tty->termios.c_iflag;
+ priv->termios.c_oflag = tty->termios.c_oflag;
+ priv->termios.c_cflag = tty->termios.c_cflag;
+ priv->termios.c_lflag = tty->termios.c_lflag;
for (i = 0; i < NCCS; i++)
- priv->termios.c_cc[i] = tty->termios->c_cc[i];
+ priv->termios.c_cc[i] = tty->termios.c_cc[i];
priv->cfg.pktlen = cfg->pktlen;
priv->cfg.baudrate = cfg->baudrate;
priv->cfg.databits = cfg->databits;
struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
+ unsigned int iflag = tty->termios.c_iflag;
unsigned int old_iflag = old_termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
struct klsi_105_port_settings *cfg;
unsigned long flags;
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
|| (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
/* Not currently supported */
- tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
+ tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
#if 0
priv->last_lcr = 0;
|| (iflag & IXON) != (old_iflag & IXON)
|| (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
/* Not currently supported */
- tty->termios->c_cflag &= ~CRTSCTS;
+ tty->termios.c_cflag &= ~CRTSCTS;
/* Drop DTR/RTS if no flow control otherwise assert */
#if 0
if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
static void kobil_init_termios(struct tty_struct *tty)
{
/* Default to echo off and other sane device settings */
- tty->termios->c_lflag = 0;
- tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
- tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+ tty->termios.c_lflag = 0;
+ tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+ tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF;
/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
- tty->termios->c_oflag &= ~ONLCR;
+ tty->termios.c_oflag &= ~ONLCR;
}
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
struct kobil_private *priv;
int result;
unsigned short urb_val = 0;
- int c_cflag = tty->termios->c_cflag;
+ int c_cflag = tty->termios.c_cflag;
speed_t speed;
priv = usb_get_serial_port_data(port);
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
/* This device doesn't support ioctl calls */
- *tty->termios = *old;
+ tty_termios_copy_hw(&tty->termios, old);
return;
}
urb_val |= SUSBCR_SPASB_EvenParity;
} else
urb_val |= SUSBCR_SPASB_NoParity;
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
tty_encode_baud_rate(tty, speed, speed);
result = usb_control_msg(port->serial->dev,
* either.
*/
spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios->c_cflag & CBAUD))
+ if (tty && (tty->termios.c_cflag & CBAUD))
priv->control_state = TIOCM_DTR | TIOCM_RTS;
else
priv->control_state = 0;
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
/* Set the data read from the usb port into the serial port buffer. */
tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dev_err(&port->dev, "%s - bad tty pointer - exiting\n",
- __func__);
- return;
- }
-
if (tty && urb->actual_length) {
/* Loop through the data copying each byte to the tty layer. */
tty_insert_flip_string(tty, data, urb->actual_length);
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
write_mos_reg(port->serial, port->number - port->serial->minor,
MCR, mos7720_port->shadowMCR);
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
write_mos_reg(port->serial, port->number - port->serial->minor,
MCR, mos7720_port->shadowMCR);
lStop = 0x00; /* 1 stop bit */
lParity = 0x00; /* No parity */
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* Change the number of bits */
switch (cflag & CSIZE) {
dbg("%s\n", "setting termios - ASPIRE");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - cflag %08x iflag %08x", __func__,
- tty->termios->c_cflag,
- RELEVANT_IFLAG(tty->termios->c_iflag));
+ tty->termios.c_cflag,
+ RELEVANT_IFLAG(tty->termios.c_iflag));
dbg("%s - old cflag %08x old iflag %08x", __func__,
old_termios->c_cflag,
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7840_port->shadowMCR &= ~MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7840_port->shadowMCR |= MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
lStop = LCR_STOP_1;
lParity = LCR_PAR_NONE;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* Change the number of bits */
if (cflag & CSIZE) {
dbg("%s", "setting termios - ");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
+ tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
dbg("%s - port %d", __func__, port->number);
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
.driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
static void oti6858_init_termios(struct tty_struct *tty)
{
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 38400;
- tty->termios->c_ospeed = 38400;
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios.c_ispeed = 38400;
+ tty->termios.c_ospeed = 38400;
}
static void oti6858_set_termios(struct tty_struct *tty,
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
spin_lock_irqsave(&priv->lock, flags);
divisor = priv->pending_setup.divisor;
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
- *tty->termios = *old_termios;
+ tty->termios = *old_termios;
return;
}
{
struct usb_device *dev = port->serial->dev;
struct qt2_port_private *port_priv;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
u16 baud;
unsigned int cflag = termios->c_cflag;
u16 new_lcr = 0;
port_priv->device_port = (u8) device_port;
if (tty)
- qt2_set_termios(tty, port, tty->termios);
+ qt2_set_termios(tty, port, &tty->termios);
return 0;
static void sierra_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
sierra_send_setup(port);
}
static void spcp8x5_init_termios(struct tty_struct *tty)
{
/* for the 1st time call this function */
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 115200;
- tty->termios->c_ospeed = 115200;
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios.c_ispeed = 115200;
+ tty->termios.c_ospeed = 115200;
}
/* set the serial param for transfer. we should check if we really need to
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned short uartdata;
unsigned char buf[2] = {0, 0};
/* check that they really want us to change something */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
/* set DTR/RTS active */
struct ktermios *old_termios)
{
struct usb_device *dev = port->serial->dev;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
u16 baud, divisor, remainder;
unsigned int cflag = termios->c_cflag;
u16 urb_value = 0; /* will hold the new flags */
dbg("%s - set uart failed", __func__);
if (tty)
- ssu100_set_termios(tty, port, tty->termios);
+ ssu100_set_termios(tty, port, &tty->termios);
return usb_serial_generic_open(tty, port);
}
}
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
dbg("%s - sending TI_OPEN_PORT", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
usb_clear_halt(dev, port->read_urb->pipe);
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
dbg("%s - sending TI_OPEN_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
int port_number = port->number - port->serial->minor;
unsigned int mcr;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
dbg("%s - old clfag %08x, old iflag %08x", __func__,
}
/* CMSPAR isn't supported by this driver */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
if (cflag & PARENB) {
if (cflag & PARODD) {
if (retval)
goto error_get_interface;
- retval = tty_standard_install(driver, tty);
+ retval = tty_port_install(&port->port, driver, tty);
if (retval)
goto error_init_termios;
* Do the resource freeing and refcount dropping for the port.
* Avoid freeing the console.
*
- * Called asynchronously after the last tty kref is dropped,
- * and the tty layer has already done the tty_shutdown(tty);
+ * Called asynchronously after the last tty kref is dropped.
*/
static void serial_cleanup(struct tty_struct *tty)
{
if (port->serial->type->set_termios)
port->serial->type->set_termios(tty, port, old);
else
- tty_termios_copy_hw(tty->termios, old);
+ tty_termios_copy_hw(&tty->termios, old);
}
static int serial_break(struct tty_struct *tty, int break_state)
struct usb_wwan_intf_private *intfdata = port->serial->private;
/* Doesn't support option setting */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
if (intfdata->send_setup)
intfdata->send_setup(port);
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
port_settings.port = port->number + 1;
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/slab.h>
+#include <linux/platform_data/omap1_bl.h>
#include <mach/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
#define UPPER_MARGIN 32
#define LOWER_MARGIN 32
-static resource_size_t da8xx_fb_reg_base;
+static void __iomem *da8xx_fb_reg_base;
static struct resource *lcdc_regs;
static unsigned int lcd_revision;
static irq_handler_t lcdc_irq_handler;
clk_disable(par->lcdc_clk);
clk_put(par->lcdc_clk);
framebuffer_release(info);
- iounmap((void __iomem *)da8xx_fb_reg_base);
+ iounmap(da8xx_fb_reg_base);
release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
}
if (!lcdc_regs)
return -EBUSY;
- da8xx_fb_reg_base = (resource_size_t)ioremap(lcdc_regs->start, len);
+ da8xx_fb_reg_base = ioremap(lcdc_regs->start, len);
if (!da8xx_fb_reg_base) {
ret = -EBUSY;
goto err_request_mem;
clk_put(fb_clk);
err_ioremap:
- iounmap((void __iomem *)da8xx_fb_reg_base);
+ iounmap(da8xx_fb_reg_base);
err_request_mem:
release_mem_region(lcdc_regs->start, len);
#include <linux/clk.h>
#include <linux/fb.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
/* Vertical Frame Timing Registers */
#define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */
#include <linux/io.h>
#include <linux/math64.h>
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
#include <mach/hardware.h>
/*
#include <mach/msm_iomap.h>
#include <mach/irqs.h>
#include <mach/board.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include "mddi_hw.h"
#define FLAG_DISABLE_HIBERNATION 0x0001
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
struct panel_info {
struct platform_device pdev;
#include <linux/sched.h>
#include <linux/gpio.h>
#include <linux/slab.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
static DECLARE_WAIT_QUEUE_HEAD(nt35399_vsync_wait);
#include <linux/gpio.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#define LCD_CONTROL_BLOCK_BASE 0x110000
#include <linux/slab.h>
#include <mach/msm_iomap.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <linux/platform_device.h>
#include <linux/export.h>
#define _MDP_HW_H_
#include <mach/msm_iomap.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
struct mdp_info {
struct mdp_device mdp_dev;
#include <linux/file.h>
#include <linux/delay.h>
#include <linux/msm_mdp.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include "mdp_hw.h"
#include "mdp_scale_tables.h"
#include <linux/msm_mdp.h>
#include <linux/io.h>
#include <linux/uaccess.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <mach/board.h>
#include <linux/workqueue.h>
#include <linux/clk.h>
#include <linux/clk.h>
#include <linux/mutex.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include <mach/ipu.h>
-#include <mach/mx3fb.h>
+#include <linux/platform_data/video-mx3fb.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-ldm.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include "nuc900fb.h"
#define __NUC900FB_H
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
enum nuc900_lcddrv_type {
LCDDRV_NUC910,
#include <linux/lcd.h>
#include <linux/gpio.h>
-#include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
+#include <mach/board-ams-delta.h>
#include "omapfb.h"
#include <linux/spi/spi.h>
#include <linux/module.h>
-#include <plat/lcd_mipid.h>
+#include <linux/platform_data/lcd-mipid.h>
#include "omapfb.h"
#include <linux/platform_device.h>
#include <asm/gpio.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <plat/cpu.h>
#include <plat/clock.h>
#include <video/omapdss.h>
#include <linux/omapfb.h>
#include <video/omapdss.h>
+#include <plat/cpu.h>
#include <plat/vram.h>
#include <plat/vrfb.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <mach/bitfield.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
/*
* Complain if VAR is out of range.
#include <linux/platform_device.h>
#include <linux/wait.h>
-#include <mach/vt8500fb.h>
+#include <linux/platform_data/video-vt8500lcdfb.h>
#include "vt8500lcdfb.h"
#include "wmt_ge_rops.h"
#include <linux/platform_device.h>
#include <linux/wait.h>
-#include <mach/vt8500fb.h>
+#include <linux/platform_data/video-vt8500lcdfb.h>
#include "wm8505fb_regs.h"
#include "wmt_ge_rops.h"
#include <linux/pm_runtime.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include "../w1.h"
#include "../w1_int.h"
/* remove module dependency */
pm_runtime_disable(&pdev->dev);
- free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+ free_irq(platform_get_irq(pdev, 0), hdq_data);
platform_set_drvdata(pdev, NULL);
iounmap(hdq_data->hdq_base);
kfree(hdq_data);
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
config PNX4008_WATCHDOG
- tristate "PNX4008 and LPC32XX Watchdog"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ tristate "LPC32XX Watchdog"
+ depends on ARCH_LPC32XX
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the PNX4008 or LPC32XX processor.
+ in the LPC32XX processor.
This driver can be built as a module by choosing M. The module
will be called pnx4008_wdt.
#include <linux/io.h>
#include <linux/uaccess.h>
#include <mach/hardware.h>
-#include <mach/regs-timer.h>
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 171 /* seconds */
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
+#include <plat/cpu.h>
#include <plat/prcm.h>
#include "omap_wdt.h"
case WDIOC_GETSTATUS:
return put_user(0, (int __user *)arg);
case WDIOC_GETBOOTSTATUS:
+#ifdef CONFIG_ARCH_OMAP1
if (cpu_is_omap16xx())
return put_user(__raw_readw(ARM_SYSST),
(int __user *)arg);
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
if (cpu_is_omap24xx())
return put_user(omap_prcm_get_reset_sources(),
(int __user *)arg);
+#endif
return put_user(0, (int __user *)arg);
case WDIOC_KEEPALIVE:
spin_lock(&wdt_lock);
bnx2/bnx2-mips-06-6.2.1.fw \
bnx2/bnx2-rv2p-06-6.0.15.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
-fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.10.0.bin \
+++ /dev/null
-:100000003C4237180201030000000000000000001D
-:10001000576564204465632030312031323A3234F0
-:100020003A33302031393939000000000000000037
-:10003000E96C0F426547694E6E496E47206F462056
-:10004000634F6445CC135A15E8167618041A921BB0
-:10005000201DAE1E3C20CA215823E6247426022807
-:1000600090291E2BAC2C3A2EC82F5631E432723414
-:1000700000368E371C39AA3A383CC63D543FE24020
-:100080007042FE438C451A47A848364AC44B524D2D
-:10009000E04E6E50FC518A531855A6563458C2593A
-:1000A000505BDE5C6C5EFA5F88611663A464326646
-:1000B000C0674E69DC6A6A6CF86D866F1471A27253
-:1000C0003074BE754C776C778C77AC7733DB8ADC19
-:1000D0005333DB250700750A8A1E080183E30CEB06
-:1000E00020903C01750A8A1E080180E3C0EB129043
-:1000F0008A1E0D013C02750680E30CEB049080E340
-:10010000C053508B1EBA138EDBE86A65558BEC53D7
-:100110001E2BC08ED88B5E04C1E304035E06D1E3C0
-:100120002E8B9F44008D472A1E5A1F5B5DC3558B43
-:10013000EC531E2BC08ED88B5E04C1E304035E0615
-:10014000D1E32E8B9F44008D47341E5A1F5B5DC345
-:10015000FB558BEC53515256571E061E0733C08E6B
-:10016000D88B5E04268A47592503008BF0D1E62EF2
-:100170008BB4C400C1E0042602471AD1E08BE82EFC
-:100180008BAE4400892C268A471C88440F268A4758
-:100190001D884410268A471E884411268A471F88D6
-:1001A0004412268A4720884413268A472388441409
-:1001B000268A4724884415268A475A88440E33C025
-:1001C00089440689440888440B88440AB021B464F1
-:1001D000894404894402B05588440D88440CE86A77
-:1001E00000725BE8C900E8C110894408807C0F01F7
-:1001F0007429E82B02E87F02807C0F03741DE8A9B4
-:10020000108BF82B44083DA00F7210897C0833C076
-:1002100087440685C07504C6440AFF8A440A84C020
-:10022000750BB80800E86A4AE8A90173BFE84F01F6
-:100230008166487FFF83667ABFB002E8040E8A4475
-:100240000A98071F5F5E5A595B5DC3814E48800064
-:10025000B040E83D4AE88940732AE84D108BD8B099
-:1002600005E82E4AF6462702751AE83D102BC33DD5
-:10027000581B72EB8166487FFFB002E8C40DC6448C
-:100280000A01F9C3834E7A40F8C3FBB001E8024A81
-:10029000FAE8991EE40A84C075F0B04EE60AFBB095
-:1002A00001E8EE49FAE8851EE40A84C075F0C3FA55
-:1002B000E87A1EE4EC884416E4E4884417E4F888FD
-:1002C0004418E4F0884419E41088441AE41288447D
-:1002D0001BE41488441CE43488441DE43688441E1E
-:1002E000E4D824018AE0E4DA24020AC488441F8A9C
-:1002F0004410E8CD1F8A4411E835218A4412E88968
-:10030000218A4413E84321C686A10000E414241086
-:10031000E614E412243DE6128A44153C01721E776D
-:1003200016B011E634B013E636E4140C10E614E40B
-:10033000120C40E612EB06E4120C02E6128A440F9D
-:100340003C0174063C02740AEB0EE4120C08E6123F
-:10035000EB06E4120C10E612E82FFF8A44143C026C
-:100360007508B05588440C88440DB021B4648944A4
-:1003700004894402E40C0C10E60CE8ED39FBC3E8F8
-:100380005F3F7308FBB00AE80849EBF3FAE89D1DEC
-:100390008A64168A441789869400E6E48AC4E6ECE7
-:1003A0008A64188A441989869600E6F08AC4E6F8B9
-:1003B0008A441AE6108A441BE6128A441CE6148A10
-:1003C000441DE6348A441EE6368A441FE6D8E6DA3F
-:1003D000E9B7FE90FA8A440EE6FEE402A80175052C
-:1003E00033C0FBF8C333C0E400FBF9C38A64148054
-:1003F000FC02742BFEC0FEC780FF4E721C74098085
-:10040000FF507308B00AEB17B00DEB1302DC32FF9C
-:1004100080FB7F7C02B3218AC33C7F7C02B021C376
-:10042000FA807C0B047602FBC38B46243D080072E5
-:10043000F68E46028B7E228A440C8B5C02AAE8ABC5
-:10044000FFAAE8A7FFAAE8A3FFAAE89FFF88440C39
-:10045000895C0280440B04897E22836E24048346D7
-:100460001A04807E26027406806626FDFBC360B0F7
-:10047000FDE8023F61FBC3FA807C0F037509C644A7
-:100480000B00E8E538FBC3C47E148B4E3A85C97572
-:1004900035268B0D4747E3EA3B7E047622B80200FF
-:1004A00039462E7707C7462E0000EB138B5E2C894A
-:1004B0005E0426C70700004343895E2C29462E852B
-:1004C000C978CE894E3A8A440D8B5C04268A25472A
-:1004D0003AC47516FE4C0BFF4406E80FFFE2ED88A8
-:1004E000440D895C04894E3AEBA7C6440AFEE879BC
-:1004F00038FBC390E8B30D8AE88A0ECB13B3078AA2
-:10050000C1EEEB00EC3AC1750902CDFECB75F0EB04
-:100510000C90880ECB138AE8BBFFFFF9C3880ECB83
-:1005200013F8C390BB3F3F8A8E9E00BAFE00EC8A50
-:10053000E832C122C37502F8C3F9C390E8E5FF733E
-:1005400001C3BAD000BB03038A8E9F00EC8AE83255
-:10055000C122C37502F8C3F9C39033C08ED88EC0D0
-:10056000803EC813007507B00AE82647EBF2FB335C
-:10057000DB8A1EC913434383FB7E760733DBB0025D
-:10058000E80F472E8BAF4400837E080074E7881E77
-:10059000C913B002E8FB46FAF7463840007414E885
-:1005A000961BE87FFF721C33D28A969F0083C20E8F
-:1005B000EB0C90E8771BE883FF7208BA4800E83339
-:1005C000FF73AB23CB898E9A0089969C00FE86B57B
-:1005D00000C606C81300B00AE8670AFBEB891018CA
-:1005E000082833C0A005018AC824407524C7067CAA
-:1005F000128E45C70642120100C606541202B00808
-:10060000F6C1017402B004A34612A24C12A29412C5
-:10061000C3C7067C12B645A00F0184C0750E6A00E0
-:100620001FC60693121E9C0EE8B10C90C70644121A
-:100630000100A342128BD8C1E304881E9412BEE2CB
-:10064000052BF08BC833DB8BFB2EAC888548128AD8
-:10065000D80C05E6FE8AE0EB00E4FE32C4A83F7445
-:1006600003E99E00E400888550128AE02430BA1025
-:10067000FF3C30741280FC04740ABA0403F60608C6
-:1006800001FE7403BA080F88954C1202FA32C0F6C4
-:10069000C4087402B001888558128AC43C35745B62
-:1006A0003C3674573C3474533C04744F3C14744BC4
-:1006B0003C157447A8407425C685541204D1E7B48C
-:1006C000038AC389855C128AC38AE380CC01898549
-:1006D0006412D1EF47E203EB1A90E96CFFC6855430
-:1006E0001202D1E78AE68AC30C0489855C12D1EF35
-:1006F00047E2E733C08AC7A34612C3C68554120631
-:10070000EBBBC68554120033C08885501288854CD7
-:100710001288855812EBA6C7462602128B461E8900
-:1007200046008946228B4620894624C7461A000087
-:10073000C3C7463C8000C7463801001E568B763042
-:100740008976048976148E5E0633C089044646890C
-:10075000762C89463A8B4632484889462E5E1FC31E
-:1007600033C089464889464AC74646AE0189464E47
-:100770008B46448946508B4642894640894608C389
-:1007800033C0894676894678C7467A1000561E8B54
-:10079000767089761089760C8E5E12C70400008B05
-:1007A00046728946741F5EC3895618895602895657
-:1007B0000689560A89560E8956128956168BD84BC9
-:1007C0004BC1E302BF0200897E1E03FB897E30031A
-:1007D000FB897E4203FB897E7083EB08895E20895A
-:1007E0005E32895E44895E7250E82BFFE871FFE853
-:1007F0003FFFE88BFF58C3B83075C1E8040E5B03B8
-:10080000C3A3BA13833E4212007407803E941200C1
-:10081000750E6A001FC60693121E9C0EE8BD0A9054
-:10082000B8307AC1E80440A3C0132B061201F7D8F0
-:1008300033D28BCA8A0E9412F7F13D8000770E6A8C
-:10084000001FC6069312259C0EE8900A90483DFFB3
-:10085000077203B8FF07A3C21333C98A0E94123379
-:10086000F6B800092E8BAC440089464C404646E25F
-:10087000F38A0E941233F68B16C013A1C2132E8B7B
-:10088000AC4400E822FF03D04646E2F2C333C02E58
-:100890008BAD44008946084747E2F4C35133C00A90
-:1008A000C22E8BAD440089869E00814E38002047C1
-:1008B00047FEC480FC04720432E4FEC0E2E35983C4
-:1008C000E9107405F7D9E8C4FFC35133C00AC22E3A
-:1008D0008BAD440089869E00834E3840474780C4D4
-:1008E00010790432E4FEC0E2E65983E9107405F79A
-:1008F000D9E899FFC3E8D2FFC38D089C08CA08F560
-:10090000088B0E421233F6515633DB8BCB8A944858
-:10091000128A8C4C128A9C54128BFEC1E70585DB2F
-:100920007502B1102EFF97F9085E5946E2D9C3014E
-:10093000CC03D000E802D000E801D000E800D000ED
-:10094000E804D0A8DA00DC00DE01D803CC03CC0335
-:10095000CC04D0A8DA20DC00DE03CC03CC03CC002E
-:10096000D803CC03CC03CC03CC03CC03CC03CC0303
-:10097000CC03CC03CC03CC03CC03CC03CC03CC03FF
-:10098000CC04D000DA20DC03DE01D803CC03CC0396
-:10099000CC03CC00D800CC00D0000056521E0E1F55
-:1009A000BE2F0933D2FCAD85C0740D8AD4EEAD855F
-:1009B000C074058AD4EEEBEE1F5A5EC3E48084C097
-:1009C00074167814B027E6FCB011E634E4FC3C273A
-:1009D0007506E4117502F8C3F9C383C206B0BFEE11
-:1009E00083EA02B010EE8886AF00B01183C204EE35
-:1009F00083C202EEB01383C202EE83C202EE2EA1C6
-:100A00004C2D8986940083EA0EEE83C2028AC4EEDE
-:100A100083C204B003EE8886A80083EA0432C0EEE5
-:100A200083C202B089EE8886A6000C06EEB040B400
-:100A30003889461CC74636380083C20432C0EE8867
-:100A400086A700C383C206B0BFEE83EA02EC3A86F3
-:100A5000AF00752483C204EC3C11751C83C206EC04
-:100A60003C13751483EA088A86A800EE83EA02EC38
-:100A700024C03CC07502F8C3F9C333C98BD18BF1D4
-:100A80008A0E9412C1E9022E8BAC4400F74638005E
-:100A900020740E8A869E00E6FE32C0E68042E8FAA6
-:100AA000FE83C608E2E185D27403E80508C333C9B2
-:100AB0008BF18A0E94122E8BAC4400F7463840001E
-:100AC0007406E87316E812FF4646E2EAC333C98BA0
-:100AD000F18A0E9412C1E9022E8BAC4400F746381D
-:100AE00000207416E84616E8D2FE730E6A001FC690
-:100AF0000693121C9C0EE8E3079083C608E2D9C354
-:100B000033C98BF18A0E94122E8BAC4400F7463811
-:100B100040007416E82116E82AFF730E6A001FC60B
-:100B20000693121C9C0EE8B307904646E2DAC30C0B
-:100B300000001000131200001400283C001B3E00AF
-:100B4000002A00002C0000420014D80000DA000047
-:100B50003400113600133800113A001300005650CB
-:100B600052BE2F0B2EAD85C07406922EACEEEBF468
-:100B70005A585EC3532EA16022E6E4E6F08AC4E62A
-:100B8000ECE6F8E8D8FFB04BE610B050E612B0380B
-:100B9000E614E8AE15B046E60AE8A715B01AE60A6C
-:100BA000E8A015B022E60AE89915E8FD068BD8E41E
-:100BB00016A8047518E8F2062BC33D320072F06ADD
-:100BC000001FC6069312239C0EE8100790E8DA0671
-:100BD0002BC33D2400771BB031E6FC565155B910AC
-:100BE000002E8BAC4400814E3880004646E2F25D18
-:100BF000595EE869FFE84B15B046E60AE844155B24
-:100C0000C333F68B0E42122E8BAC4400F7463800ED
-:100C1000207406E81715E85BFF83C620E2E9C38B62
-:100C2000C20504008946282EA14C2D89868E008994
-:100C300086900089869200C686A3000AC686C300F5
-:100C4000035283C2048A86A6000C06EE5A83C202AF
-:100C5000B005EE8886A500C3E803FFE8E514B042BE
-:100C6000E60AF74638800074062EA19C22EB042E7B
-:100C7000A16C22C7461C0C008986940089869600C8
-:100C800089868E008986900089869200E6F0E6E4E7
-:100C90008AC4E6F8E6ECC686C30003E8A514B01AD9
-:100CA000E60AB0108886A500E60CC333C98BF18A2A
-:100CB0000E94122E8BAC4400F7463840007406E8C0
-:100CC0007614E85AFF4646E2EAC333C98BF18A0E2E
-:100CD00094122E8BAC4400F7463800207406E84C82
-:100CE00014E874FF4646E2EAC390833E441200755E
-:100CF00014B001BA0601EE2AC0EEB002EEB004EE66
-:100D0000B80002EB0FBA0601B040EEB801008A0E3F
-:100D10000E01D3E0A38812C3A18812A384122D2050
-:100D200000A38A122D2000A38212C706861220007B
-:100D3000C70680123200C3833E44120074768B0EC5
-:100D4000421233F68AA4541284E4745F8A844812EF
-:100D50000C04E6FEF6C4047425B01BBA0000EEEBEA
-:100D6000002AC0BA0200EEEB00B003EEEB0032C086
-:100D7000BA0200EEEB00BA0000B000EEEB2DB01F9F
-:100D8000BA0000EEEB002AC0BA0200EEEB00B0039E
-:100D9000EEEB00D1E68A845D12D1EEF6D0BA020005
-:100DA000EEEB00BA0000B00AEEEB00E404EB00E466
-:100DB0000446E290C390B81400BA3EFFEFB80600B4
-:100DC000BA32FFEFB80F00BA34FFEFBA36FFEF8345
-:100DD0003E4412007516B81100BA38FFEFB8120081
-:100DE000BA3AFFEFB81B00BA3CFFEFC3B81100BA24
-:100DF00038FFEFB81200BA3AFFEFB81B00BA3CFF59
-:100E0000EFC3B8FC00BA28FFEFFB833E4412007426
-:100E100007B8CC00BA28FFEFC300FFFF202428FF4B
-:100E20002CFFFF303438FFFF3C903C0F770EBB198E
-:100E30000E2ED73CFF74058AD8F8C3902ADBF9C37D
-:100E4000833E4412007427A00601802606013080EC
-:100E50003E0601307518B90200BFC413BA0601EC92
-:100E6000A82075F8BA0401EDABE2F1EB1690B904D5
-:100E700000BFC413BA0601ECA82075F8BA0401EC4F
-:100E8000AAE2F1FA90BEC413AD80E43F80FC027484
-:100E90000E6A001FC60693120A9C0EE83E0490AD2F
-:100EA0003C0F75ED8AC4E881FF72E6881E1A01C600
-:100EB000068E1200B0000A061A01BA0001EEC6063C
-:100EC0008F1240833E4412007506B80C00EB04906C
-:100ED000B84C00BA28FFEFC3833E4412007501C32B
-:100EE000A150120B0652120AC4A80874F2A00F01F6
-:100EF0002AE450FF36BA131FE8505683C4026A0032
-:100F00001F33C0A3BC13A00F01A3BE138B1EBC13C1
-:100F10008A875012F687501208740D24078AE0BEA3
-:100F2000CC00A0BC13E8943DFF06BC13FF0EBE131B
-:100F300075DAC3901E33C08ED8B001E8543D1FC38C
-:100F400033C98BF18A0E94122E8BAC4400C74662D3
-:100F50003844C7467CFC3BC7467EE23BC7868000E0
-:100F6000EC3CE8AB16C686C00011837E080074070F
-:100F70005156E833335E594646E2CDC333C98BF14F
-:100F80008BF98A0E9412C1E902E3132E8BAC440054
-:100F90008A869E0088856C1283C60847E2EDC3FAF4
-:100FA000FCB0C0BA0001EE33C08ED88EC08ED0BF68
-:100FB0001601B9CC772BCFD1E9F3ABBC4012E8D9FD
-:100FC00002E8703CBECC0FE8F23CF49033C08ED8FF
-:100FD0008EC08ED0F6060A0180740BBE3555E8DB54
-:100FE0003CB001E8AC3CE8B300E8F6F5E808F8E806
-:100FF0000FF9E885FAE8B6FAE8EFFCE8C210E80372
-:101000003CE8B2FDE830FDE85402C6068F12C0E8A5
-:10101000BBFAE8EBFAE8E9FBE8AFFCE88DFCE81F77
-:10102000FFE858FFE8DBFDE816FE33C0BE5A05E8CE
-:101030008A3CE8A3FEE8E0FCFBBEA444E87D3CE972
-:10104000CA2D56988BF08B425285C07527C74252E5
-:10105000010053368B9C2C01F6C301750C36896850
-:10106000523689AC2C015B5EC33689AC2C013689C3
-:10107000AC1C015B5EC356988BF033ED368B841C41
-:1010800001A80175158BE833C08742523689841C4C
-:1010900001A80174053689842C015EC3565133F6CC
-:1010A000B80100B9080089841C0189842C014646D6
-:1010B000E2F4595EC390BB01008BE8FF4E6E740AE8
-:1010C0008BDD8B4658A80174F0C38B4648A90800F5
-:1010D0007445F7463840007427E85C1080C2068AE1
-:1010E00086A80024BF8886A800EE60B0FEE886329D
-:1010F00061B002E84CFF8B464824F7894648EB175D
-:10110000E82A10814E2600408A86A5000C028886B7
-:10111000A500E60C8B4648A904007414B002E8212F
-:10112000FF8B464824FB89464860B0DFE8473261C0
-:1011300033C0874658F6C301750B36894758A80156
-:10114000750DE974FFA32201A8017503E96AFF89FF
-:101150001E3201C3BB01008BE8F74638400074150E
-:10116000E8D50F80C20AECA840750A8BDD8B465685
-:10117000A80174E3C38B462680E4FE80CC02894636
-:1011800026B002E8BCFE33C0874656F6C301750A96
-:1011900036894756A801750BEBBDA32001A8017540
-:1011A00002EBB4891E3001C3601E062BC08ED8A08E
-:1011B000901284C07549A12201A8017503E8F6FECA
-:1011C000A12001A8017503E88AFFA1AC13487805A6
-:1011D0007445A3AC13A1AE134878057451A3AE13A4
-:1011E000A1B0134878057463A3B013A17E124078B0
-:1011F00003A37E12B80080BA22FFEF071F61CFA0C1
-:101200009112403C02720B33C0A29112FF167C1265
-:10121000EBA4A29112EB9FA08E1232068F12A28E27
-:10122000120A061A01BA0001EEB82C01EBA4833EA3
-:101230008412107211BA28FFED0C81EFE85337BA0F
-:1012400028FFED247EEFB80400EB92C6068D120154
-:10125000E83F37C6068D1200A1B213EB8B908A1EB1
-:101260000B012AFF6BC319BA62FFEFB80A00BA601C
-:10127000FFEFB801E0BA66FFEFB8FFFFBA52FFEF29
-:10128000B809C0BA56FFEFC706AC132C01C706AEAB
-:10129000130400C606911200C3908A1E0B012AFF98
-:1012A0006BC305D1E8A31801C39052BA50FFED5AA1
-:1012B000C39053518B1E1801B9320590E2FE4B7555
-:1012C000F7595BC3B080BA00010A061A01EEC39059
-:1012D000B040EBF2B0C0EBEEB000EBEAFA60061EF5
-:1012E000162BDB8EDB2EA1BA4C2EA3924CA09312B0
-:1012F000988BE889262D7A803ECA13007403E96B27
-:1013000042E8C0FFE8ABFFE8A8FFB020C606901295
-:1013100000FF167C128BFD83FF0A7211E8B9FFE80B
-:1013200090FFE8ABFFE88AFF83EF0AEBEA0BFF745C
-:101330000FE8A4FFE87BFFE89AFFE875FF4F75F11F
-:10134000E895FFE86CFFEBB98A86A50024FDEE88DE
-:1013500086A500C38A86A6000C02EEC38B7638F7FA
-:10136000C6010074EF8B4E368B462E3BC173028B49
-:10137000C82BC189462E014E34C47E0426010D8B34
-:101380007E2C83EA04F36C8EC1897E2C3B463C7232
-:1013900012F7C62000750B83CE20897638B000E89E
-:1013A000A0FCC3F7C60400741B8BD883CE108976CB
-:1013B000388A86A70024FE8886A70083C208EE83A9
-:1013C000EA088BC33D40007201C3814E380004839C
-:1013D000C2028A86A50024FA8886A500EEC38A8602
-:1013E000A6000C02EEC3F74638010074F18B4E2EB6
-:1013F00032DB8ABEA30083C206C476048B7E2C83B4
-:10140000F908722CECA80174168AE083EA0AEC83CE
-:10141000C20A84E77551AAFEC34983F90873E5320D
-:10142000FF26011C015E34897604894E2E897E2CAC
-:101430003B4E3C7211F64638207401C3834E38206F
-:10144000B000E8FDFBC3F64638047415834E38102F
-:101450008A86A70024FE8886A70083EA02EE83C25C
-:10146000023D4000725DC332FF26031C85DB740918
-:1014700026891C8BF74747494980E41E80CCC0264B
-:101480008904F6C41074278B7638F7C60010740BE5
-:1014900050FE86B200B00AE8A8FB58F7C6000174F7
-:1014A0000DE882268B76388B4E2E8B7E04AB8BF725
-:1014B00033C0AB32DB8ABEA300494983F9087217F7
-:1014C000E941FF814E38000483C2F88A86A50024D2
-:1014D000FA8886A500EEC3E945FF83C208EC88863A
-:1014E000AA00C0E8048AE08AC88686A90032E08B98
-:1014F0005E3E84E3744F8AC18B4E26F6C504740C9D
-:10150000A808740580E1BFEB0380C940F6C50874E4
-:101510000CA802740580E17FEB0380C980884E2609
-:101520008BF08A86A50084C97408A802741524FD6E
-:10153000EB06A802750D0C028886A50083EA0AEE68
-:1015400083C20A8BC684E77501C3C686BA0001B0A0
-:101550000EE8EEFAF74638000274EE837E2E06722D
-:10156000E88AA6AA00C45E048B7E2CB0FFAAB00253
-:10157000AB26830703836E2E03897E2CF646382024
-:101580007401C3834E3820B000E8B6FAC39083EAF2
-:1015900008E9B4FD83C2068B5E26F6C3C075EF8BE7
-:1015A0004E1CEC8886A40083EA0AA82075028ACD26
-:1015B00032ED8B461A3BC87318014E2A2BC189465F
-:1015C0001AC57600F36E8ED98976003D2000723000
-:1015D000C385C074318BC801462AC57600F36E8E70
-:1015E000D980CB02895E26E832F1F6C701751683F1
-:1015F000C202E853FDF6C710750BB002E843FAC308
-:10160000F6C70174F0C380CB02895E26F6C7017469
-:10161000DE83C202E831FDF686A40040740B80E749
-:10162000FE80CF02895E26EBCCB004E814FAC3C07A
-:10163000C2C8CAC4C6CCCED0D2D8DAD4D6DCDE90EA
-:10164000E90E01E4C48AE0E4C48BD083F90872F0A7
-:1016500026833F0074048BDF49498BFB8ADE83E3DA
-:101660000F2E8AA72F16ABF6C4107424F7C60010ED
-:10167000740B50FE86B200B00AE8C6F958F7C600EF
-:1016800001740DE8A0248B76388B4E2E8B7E04AB34
-:10169000897E0433C0AB4949894E2E897E2C8BC18B
-:1016A000EB4E90EB9E90E4D684C07963E6D08AC876
-:1016B00025030003D8D1E32E8BAF4400888EAE0003
-:1016C0008B4E2EC45E048B7E2C8B7638E4862407EA
-:1016D0003C0375CFE41C913BC173028BC82BC189BD
-:1016E000462E014E3426010FBAC400F36C897E2CBD
-:1016F0003B463C721CF7C62000750B83CE208976D2
-:1017000038B000E83CF98A86AE00243FE6D6C3F93B
-:10171000C3F7C60A007435F7C61000752F83CE10C4
-:10172000897638F7C60200740E50E4D824FEE6D855
-:1017300058F7C6080074155051B9E803E40A84C08C
-:10174000E0FA84C07504B024E60A59583D4000739D
-:10175000B58A86A50024EF8886A500E60C81CE1008
-:1017600004897638EBA00008040C0109050D020A73
-:10177000060E030B070F004080C02060A0E0105051
-:1017800090D03070B0F0E4D2E6D08AC825030003D0
-:10179000D8D1E32E8BAF4400888EAE00E4D8C0E8E9
-:1017A000048BD82E8A8766178AE08AC88686A900A5
-:1017B00032E0E4988B5E3E84E374548AC18B4E26FB
-:1017C000F6C504740CA808740580E1BFEB0380C95A
-:1017D00040F6C508740CA802740580E17FEB038015
-:1017E000C980884E268BF08A86A500F6C1FD740854
-:1017F000A806741924F9EB0FA8067511F6C5017532
-:10180000040C04EB020C028886A500E60C8BC6844F
-:10181000E775098A86AE00243FE6D2C3C686BA00C1
-:1018200001B00EE81CF8F74638000274E6837E2EFD
-:101830000672E08A86A9008AE08686AA008AC832F3
-:10184000C480C90B22C1C0E4040AE0C45E048B7EDC
-:101850002CB0FFAAB002AB26830703836E2E038948
-:101860007E2CF646382075AB834E3820B000E8D188
-:10187000F7EBA090E41224DFE61281E3FE9F895E7D
-:1018800026836648F7EB7390F6C72075E7E4120CE1
-:1018900020E61232C0E6C6B083E6C680CF20895E5D
-:1018A000268A86A5000C028886A500E60CEB7490BB
-:1018B000F6C74075D3E4120C20E61232C0E6C6B07B
-:1018C00081E6C680E7DF80CB01895E26B006E8713D
-:1018D000F7908A86A50024F9E60C8886A500EB43DC
-:1018E000E4D4E6D08BF825030003D8D1E32E8BAFE8
-:1018F00044008B5E26F6C76075B6F6C3C075D3BAD2
-:10190000C6008B4E1C8B461A3BC8731E014E2A2BF9
-:10191000C189461AC57600F36E8ED98976003D20BE
-:1019200000723D8BC7243FE6D4C385C074398BC891
-:1019300001462AC57600F36E8ED983CB02895E26D6
-:10194000E8D9EDF6C70175398A86A50024F9E60CB9
-:101950008886A500F6C71075CAB002E8E4F6EBC3A6
-:10196000F6C70174EFEBBCF6C70174DC8A86A500EC
-:10197000A802741181E3FFFE81CB0002895E26EB91
-:10198000C78A86A50024FB0C02E60C8886A500EB1E
-:101990009290FDF7DF7FFEFBEFBF0004000405041B
-:1019A00005040104000405040504060406040504F6
-:1019B00005040604060405040504020400040504E5
-:1019C00005040104000405040504060406040504D6
-:1019D00005040604060405040504070407040504B9
-:1019E00005040704070405040504060406040504A9
-:1019F0000504060406040504050407040704050499
-:101A00000504070407040504050406040604050488
-:101A10000504060406040504050403040004050483
-:101A20000504010400040504050406040604050475
-:101A30000504060406040504050402040004050464
-:101A40000504010400040504050406040604050455
-:101A50000504060406040504050407040704050438
-:101A60000504070407040504050406040604050428
-:101A70000504060406040504050407040704050418
-:101A80000504070407040504050406040604050408
-:101A90000504060406040504050433DB8AD88A8796
-:101AA0006C12E6FEC1E302E4CEA8047509A8027434
-:101AB00003E92CFEF9C35053E8CBFC5B58A8027431
-:101AC00003E91CFEF8C333DB8AD88A876C12E6FE72
-:101AD000C1E302E9D0FB9A1AC61A00000200040012
-:101AE00002000600020004000200080002000400D8
-:101AF000020006000200040002000A0002000400C6
-:101B000002000600020004000200080002000400B7
-:101B1000020006000200040002000C0002000400A3
-:101B20000200060002000400020008000200040097
-:101B3000020006000200040002000A000200040085
-:101B40000200060002000400020008000200040077
-:101B5000020006000200040002000E000200040061
-:101B60000200060002000400020008000200040057
-:101B7000020006000200040002000A000200040045
-:101B80000200060002000400020008000200040037
-:101B9000020006000200040002000C000200040023
-:101BA0000200060002000400020008000200040017
-:101BB000020006000200040002000A000200040005
-:101BC00002000600020004000200080002000400F7
-:101BD00002000600020004000200C390DA1494150B
-:101BE0005C13E613DA1BDA1BE613DA1B8B94641220
-:101BF000C1E604A80174355033C08AC2E6FEE4A0F1
-:101C000085C074278BD82E8A9FDA1A52562E8BA83D
-:101C100044008B5628ECA801750D8886AD00240E73
-:101C20008AD82EFF97DC1B5E5AEBCD58A80274367B
-:101C300083C61033C08AC6E6FEE4A085C074278B35
-:101C4000D82E8A9FDA1A52562E8BA844008B56281B
-:101C5000ECA801750D8886AD00240E8AD82EFF975A
-:101C6000DC1B5E5AEBCDC39032E48BD88BD02E8A2E
-:101C70009F9A192E2297921956528AC3240303C69B
-:101C800080E304D0EB2EFF97D61A585EA955007555
-:101C9000D9C3601E062BC08ED8A15C12E6FEE400FC
-:101CA00022C4740833F6E8BFFFEBEE90E40407E4C7
-:101CB000041FB80080BA22FFEF61CF90601E062B90
-:101CC000C08ED8A15E12E6FEE40022C47408BE04F1
-:101CD00000E894FFEBEDE40407E4041FB80080BAC9
-:101CE00022FFEF61CF90601E062BC08ED8A15C1240
-:101CF000E6FEE40022C4741833F6E86BFFA160121C
-:101D0000E6FEE40022C474E5BE0800E85AFFEBDDFD
-:101D1000A16012E6FEE40022C475EDE40407E404C9
-:101D2000A15C12E6FEE4041FE404B80080BA22FFBE
-:101D3000EF61CF90601E062BC08ED8A15E12E6FE2A
-:101D4000E40022C47419BE0400E81CFFA16212E67C
-:101D5000FEE40022C474E4BE0C00E80BFFEBDCA13F
-:101D60006212E6FEE40022C475EDE40407E404A177
-:101D70005E12E6FEE4041FE404B80080BA22FFEF1E
-:101D800061CF601E062BC08ED8A15C12E6FEE480F7
-:101D900084C4740833F6E853FEEBEE90B80080BAC2
-:101DA00022FFEF071F61CF90601E062BC08ED8A1C7
-:101DB0005E12E6FEE48084C47408BE0200E82CFED5
-:101DC000EBEDB80080BA22FFEF071F61CF90601ED5
-:101DD000062BC08ED8A16012E6FEE48084C474088D
-:101DE000BE0400E806FEEBEDB80080BA22FFEF0764
-:101DF0001F61CF90601E062BC08ED8A16212E6FE36
-:101E0000E48084C47408BE0600E8E0FDEBEDB80091
-:101E100080BA22FFEF071F61CF90601E062BC08E95
-:101E2000D8A15C12E6FEE40022C4741833F6E83749
-:101E3000FEA16012E6FEE48084C474E5BE0400E8FE
-:101E4000AAFDEBDDA16012E6FEE48084C475EDA17D
-:101E50005C12E6FEE40407E4041FB80080BA22FF27
-:101E6000EF61CF90601E062BC08ED8A15E12E6FEF9
-:101E7000E40022C47419BE0400E8ECFDA16212E67D
-:101E8000FEE48084C474E4BE0600E85FFDEBDCA1E0
-:101E90006212E6FEE48084C475EDA15E12E6FEE403
-:101EA0000407E4041FB80080BA22FFEF61CF601E70
-:101EB000062BC08ED8A15C12E6FEE48084C47418A0
-:101EC00033F6E827FDA16012E6FEE40022C474E5C3
-:101ED000BE0800E892FDEBDDA16012E6FEE4002200
-:101EE000C475EDE40407E4041FB80080BA22FFEFD4
-:101EF00061CF601E062BC08ED8A15E12E6FEE48084
-:101F000084C47419BE0200E8E2FCA16212E6FEE499
-:101F10000022C474E4BE0C00E84DFDEBDCA16212AB
-:101F2000E6FEE40022C475EDE40407E4041FB800F3
-:101F300080BA22FFEF61CF90601E062BC08ED8A121
-:101F40005C12E6FEE48084C4741833F6E89DFCA1BC
-:101F50006012E6FEE48084C474E5BE0400E88CFCF4
-:101F6000EBDDA16012E6FEE48084C475ED071FB8C6
-:101F70000080BA22FFEF61CF601E062BC08ED8A171
-:101F80005E12E6FEE48084C47419BE0200E85CFCC4
-:101F9000A16212E6FEE48084C474E4BE0600E84B4D
-:101FA000FCEBDCA16212E6FEE48084C475ED071F41
-:101FB000B80080BA22FFEF61CF90601E062BC08E62
-:101FC000D8902AC0E6FEE4CEA801741433DBE8D52D
-:101FD000F6EBEF90B80080BA22FFEF071F61CF90B9
-:101FE000F60605010175EDB001E6FEE4CEA8017428
-:101FF000E3BB0400E8AFF6EBC990601E062BC08E71
-:10200000D890FB90FA2AC0E6FEE4CEA802741333FF
-:10201000DBE8CCF8EBECB80080BA22FFEF071F61D9
-:10202000CF90A80474F033DBE85BF7EBD590601E2B
-:10203000062BC08ED890FB90FAB001E6FEE4CEA845
-:10204000027415BB0400E897F8EBEB90B80080BA77
-:1020500022FFEF071F61CF90A80474F0BB0400E8D3
-:1020600024F7EBD26A001FC6069312099C0EE86B98
-:10207000F2906A001FC6069312299C0EE85DF2904A
-:10208000722072207220CE1D921CE61C1A1E722035
-:10209000821DAE1E381F7220821D72207220381FD2
-:1020A000722072207220F41DBC1C341D641E72202C
-:1020B000A81DF21E781F7220A81D72207220781FA2
-:1020C000FCB940008CCBB864202BFFAB93AB93E200
-:1020D000FAC7064C00A811833E4412007520C706BB
-:1020E0003C00084BC7063000BA1FC7063400FA1F71
-:1020F000F6060501017506C70638002E20C3C7067F
-:102100003C00564B33DB8A1E5412C1E302021E56BA
-:10211000122E8B878020A330008A1E5512C1E30245
-:10212000021E57122E8B87A020A33400C38B869EDD
-:1021300000E6FE86C4E6D0C38B869E00E6FE33D260
-:102140008AD4C351B91027E40A909084C07405E280
-:10215000F659F9C359F8C384C0781E518AE88AC871
-:10216000B80100D3E0098698003AAEA00059751076
-:10217000E8A9E5834E2602F9C39889869800EBF01A
-:10218000F8C384C07812518AE08AC8B80100D3E04D
-:1021900059F7D021869800C3C78698000000C383F2
-:1021A000C2048A86A6000C04EE83EA04C3E893FF07
-:1021B0007204B082E60AC38B4626A8FD74118A8693
-:1021C000A500A806740824F98886A500E60CC3F6C5
-:1021D000C401740A8A86A50024FB0C02EB0CA80239
-:1021E000750F8A86A50024FD0C043A86A50075D8D3
-:1021F000C38A86A500EBCFE4D833DB8AD8C0EB04D2
-:102200002E8A9F6617889EA9008B5E2680E33FF684
-:10221000C7047407A810750380CB40F6C70874077D
-:10222000A880750380CB40885E268A86A500F6C309
-:10223000FD740DA806740824F98886A500E60CC371
-:10224000F6C70174040C02EBF0F6C30275E90C0446
-:10225000EBE7C404C4048504590448044104C303DF
-:10226000820341038202570241028201410182003E
-:1022700041004E02AD0157012D002B002700210027
-:102280001600F404F404A3046F045B045104F40383
-:10229000A3035103A3026D025102A3015101A30044
-:1022A00051006202D9016D01380036003100290069
-:1022B0001B005157BF0200EB0F905156BF0100EBBE
-:1022C00007905156BF0300903C197602B017988BC7
-:1022D000F08A82C4002AE48BF083FE187346D1E6AC
-:1022E0002E8B8C5222F74638800074052E8B8C8200
-:1022F00022F7C7020074123B8E9400740C898E94EE
-:10230000008AC5E6EC8AC1E6E4F7C7010074123B17
-:102310008E9600740C898E96008AC5E6F88AC1E60E
-:10232000F05E59C377068B8E8E00EBC58B8E9000C6
-:10233000EBBFD503F6003E0010000400CA043301D1
-:102340004D00140005000103050709000102030404
-:1023500080841E00A02526000000608BF033FF2E35
-:10236000A150232E8B165223BB3223F74638800010
-:10237000740C2EA154232E8B165623BB3C23B90577
-:10238000002E3B31730A4747E2F7B8FFFFEB1D9081
-:10239000D1EF2E8A8D46232AEDD1EAD1D8E2FAF781
-:1023A000F6050200C1E8022E8AA54B232EA358236E
-:1023B000612EA15823C3080020008000000260099C
-:1023C0000800200080000002000800000100020058
-:1023D0000300040052565785C074053D0109760379
-:1023E000B80109BF5B01F7463880007403BFB20132
-:1023F00033F62E3B84B62376044646EBF5F7E72EFC
-:102400008BBCC02303C783D200D1E7F7F72E8AA481
-:10241000CA235F5E5AC3E43E80BEC30003750CF757
-:10242000467A200074050C80E63EC3247FE63EC356
-:1024300024038886C3008AE0E41024FC0AC4E61062
-:10244000808EA10042E8CEFFC390568BF083E60752
-:10245000D1E62EFFA458249068246C2470247424A0
-:102460007824872487248724B400EB0EB4C0EB0AB9
-:10247000B440EB06B420EB02B4A0E410241F0AC45D
-:10248000E610808EA100425EC3903C0277128AE083
-:10249000E41024F3C0E4020AC4E610808EA10042D6
-:1024A000C3908B5E3884C0741F3C02742083CB08B9
-:1024B0008B462E3B463C770CE888FC7207B024E63E
-:1024C0000A83CB10895E38C383E3F7EBF7F7C310B9
-:1024D0000074F5E86DFC72EC8A86C000E638B02323
-:1024E000E60AEBE08B5E388B462E3B463CE4D87721
-:1024F0000B24FE80CB12E6D8895E38C30C0180CB5A
-:1025000002EBF35033DBC1E804250F0F8AD82E8A83
-:102510008766178ADC2E8AA7661709463E58C3507D
-:1025200033DBC1E804250F0F8AD82E8A8766178A05
-:10253000DC2E8AA76617F7D021463E58C38B463E4D
-:1025400033DB8AD80ADC2E8A877617E62C8AE0E409
-:102550002A240F0AC4E62A8A86A50084E4750DA8F9
-:10256000807411247F8886A500E60CC3A8807504BA
-:102570000C80EBF1C31E6033C933D233F68ED98D94
-:10258000BEFD00578B0584C074168BD1428BFE4F65
-:10259000780938A3E40074084F79F788A2E400466C
-:1025A0005F83C7094183F91072D989B6860089967D
-:1025B0008400611FC353C7466600008B4664A94070
-:1025C00000740DB300A980007402B37F889EC1001F
-:1025D00032DBA90200740380CB40A9004074038061
-:1025E000CB02A90080740380CB01A9301E74038044
-:1025F000CBBCA90020740380CB08A904017403801C
-:10260000CB10A90800740380CB20889EC2005BC356
-:102610000651575016078DBEC400B91F0033C0AA1B
-:1026200040E2FC8B86920089868E00898690005855
-:102630005F5907C3E4D8C0E80453250F008BD82E98
-:102640008A8766178886A9005AC30886AC00C686A2
-:10265000BA0001B00EE8EAE9C3AD36A3B413AD3653
-:10266000A3B613AD36A3B81383E90636F706B6133F
-:102670000F00C38A4626F74648800074020C108873
-:1026800086BD0032C0837E1A00750E8B5E4043808B
-:10269000E3FE3B5E0875020C01837E3A00750D1E59
-:1026A000C55E148B1F1F85DB75020C02F7463810C0
-:1026B0000074020C048B5E7AF7C3020074020C08EB
-:1026C000F7C3040074020C10F7C3080074020C2056
-:1026D000F7C3400074020C408886BF00C3906A00B4
-:1026E0001FC60693120D9C0EE8F1EB90B002E6DADD
-:1026F000F8C333C0E6DAF8C3B001E6D8F8C333C094
-:10270000E6D8F8C3B0FFE84EFAE8A1FAF8C3AC493E
-:10271000E8AFFBF8C390AC49E815FDF8C390AC49AD
-:10272000E867FDF8C390AC49E81FFDF8C390AC49D9
-:10273000E634F8C3AC49E636F8C3AC493C02771F2F
-:1027400084C0751DE41424EFE614E412243FE6125D
-:10275000E416A8047409E8EAF97204B018E60AF865
-:10276000C38AE0E4140C10E614E4120CC0F6C401B1
-:102770007402247FE612F8C3AC49E825FDF8C39043
-:10278000B80040E87DFDE8B4FDE8A8FEB001E8B976
-:10279000FEF8C390B80040E885FDE8A0FDF8C390BE
-:1027A000B80010E85DFDE894FDE888FEB008E899FF
-:1027B000FEF8C390B80010E865FDE880FDF8C3900E
-:1027C000B80080E83DFDE874FDE868FEB002E879F5
-:1027D000FEF8C390B80080E845FDE860FDF8C390BE
-:1027E000B80020E81DFDE854FDE848FEB004E859B3
-:1027F000FEF8C390B80020E825FDE840FDF8C3903E
-:10280000AC49E84814E43C24E70AC4E63CF8C39029
-:10281000B8FC3B89467CE43C0C18E63CF8C3E41267
-:102820000C02E612F8C3E41224FDEBF6E8B5FCF85E
-:10283000C390836638FDF8C3AC49A8017406834E83
-:102840007A20EB0483667ADFE8CBFBF8C3908A86B4
-:10285000A5000C0224FB8886A500E60C814E26010B
-:1028600020AC4932E489466E834E48084946F9C394
-:102870008A86A5000C0224FB8886A500E60C814E02
-:10288000260120ACB40AF6E4EBD8E8FA13E43C24C1
-:10289000F80AC4E63CF8C390AD4949894664A901E9
-:1028A00000741B8BD883E3FA751AA90400740FE433
-:1028B0003E0C02E63EB83844894662F8C390E43ED6
-:1028C00024FCEBEFE43E24FCE63EE8E8FCB8AA403A
-:1028D000EBE6E86EF87205B018E60AF8C390AC496A
-:1028E000E8CFF9F8C390AC49E8CFF9F8C390E868AD
-:1028F000FD750632C0E6DAF8C3B002E6DA36A0B4F7
-:102900001324103410E8160136A1B413A901007481
-:1029100005E8FCFEEB0EA90200740432C0EB02B025
-:1029200001E8DEFE36A1B413E8B513E43C24F80A4E
-:10293000C4E63C36A1B413C1E805250100E8FAFE5F
-:1029400036A0B5132410E859FB32C0368A26B513D9
-:10295000F6C4047409FEC0F6C4087402FEC0E8DBC5
-:10296000FD36A1B613250F00E857F936A1B613C1FD
-:10297000E804250300E8B8FA36A1B613C1E8052536
-:102980000200E805FB36A1B613F6C401750432C097
-:10299000EB0980E402D0ECB0022AC4E8ACFA36F6C7
-:1029A00006B713407405E883FEEB03E884FE36F6B1
-:1029B00006B713207405E865FEEB03E868FEF8C36C
-:1029C000E4120C01E612F8C3E41224FEEBF6E41460
-:1029D00024F00C05E614E42A24F00C06E62AF8C3D9
-:1029E000E42A24F0E62AE41424F00C07E614F8C3E1
-:1029F000AD4949E864F989868E00F8C3AD4949E8D4
-:102A000058F989869000F8C3834E2604E8A8F7F8A1
-:102A1000C390836626FBE89EF7F8C390AC4984C058
-:102A2000750DE41024EFE610808EA10042F8C3E497
-:102A3000100C10EBF190AC493C02760232C0C0E0C1
-:102A400004A82074020C0824188AE0E41224E70A7F
-:102A5000C4E612808EA10044F8C3AC498886C00049
-:102A6000F8C3AC49E63AF8C3AC4984C07408E41230
-:102A70000C04E612F8C3E41224FBEBF6AC49E8D6EA
-:102A8000F67303E827F7F8C3E412A802740424FDE0
-:102A9000E612B8F000E887FA816626FFF3E857F7F8
-:102AA000E89AFAF8C390B88000E857FA804E2708F1
-:102AB000E844F7E887FAF8C3B88000E861FA81666D
-:102AC00026FFF7E831F7E874FAF8C390B81000E889
-:102AD00031FA804E2704E81EF7E861FAF8C3B8100F
-:102AE00000E83BFA816626FFFBE80BF7E84EFAF8B0
-:102AF000C39033C0AC493C017304B001EB063C0CFD
-:102B00007602B00C89461CF8C390814E2600208ABC
-:102B100086A5000C0224FB8886A500E60C834E26C1
-:102B200001F8C390814E2600408A86A5000C0288D9
-:102B300086A500E60CF8C390AC4950E805F658723B
-:102B400008E638B023E60AF8C3F9C390AC50ADE804
-:102B500082F85AF6C201741239869600740C89867E
-:102B60009600E6F086E0E6F886E0F6C202741039D8
-:102B7000869400740A89869400E6E486E0E6EC8395
-:102B8000E903C390E4168886BC00E8E6FA33DBE488
-:102B90000CA806740380CB01A810740380CB02A894
-:102BA00080740380CB04E4128AE024180AD8E4DAA3
-:102BB000F6C4027407A840750380CB20A8027509EB
-:102BC000E42AA80F740380CB40F74638020074094A
-:102BD000E4D8A801750380CB80889EBE00FE86B431
-:102BE00000B00AE85CE4F8C3AC493C027441771FCA
-:102BF00050E84FF558720C84C0740AB012E60A808F
-:102C00004E3801F8C3B011E60A806638FEF8C38B6F
-:102C1000463825FFF7894638A9000475E68A86A557
-:102C200000A81075DE0C108886A500E60CF8C3819C
-:102C30004E3800088A86A500A81074C724EFEBE779
-:102C4000AD49493C0172113C0C770D508AE0E41407
-:102C500025F00F0AC4E614588AC484C07402E64200
-:102C6000F8C3E8CFF9FE86B900B00EE8D4E3F8C3A4
-:102C70003A86AF00741F8886AF008AE080C206B033
-:102C8000BFEE80EA028AC4EE8A86A80080C202EE05
-:102C900080EA068AC4C38B463E85C08A86A5007436
-:102CA00012A808750D0C088886A50080C202EE8067
-:102CB000EA02C3A80874FB24F7EBEC8B462684C019
-:102CC00074168A86A500A802740D24FD8886A500C6
-:102CD00083C202EE83EA02C38A86A500A80275F7C2
-:102CE0000C02EBE85283C20CECC0E8048886A90011
-:102CF0008B5E2680E33FF6C7047407A8087503803F
-:102D0000CB40F6C7087407A802750380CB80885EA5
-:102D1000268A86A50084DB7410A802740A24FD8824
-:102D200086A50083EA0AEE5AC3A80275FA0C02EBE4
-:102D3000EE90FFFF00480030BA20C41A00180012BD
-:102D4000000C0006000300028001C000600030009B
-:102D50001800CD0100018000100010000E000C00D2
-:102D6000080000000000060004000300020001004B
-:102D70005251563C1E7747988BF08A82C40032E449
-:102D800083FE18743D83FE19743E83FE1E772FD197
-:102D9000E62E8B8C322D3B8E94007422898E94000B
-:102DA00083C2068A86A8008AE00C80EE83EA068A3F
-:102DB000C1EE83C2028AC5EE83C2048AC4EE5E59A4
-:102DC0005AC38B8E8E00EBCE8B8E9000EBC8525187
-:102DD0003D05007703B805008BC8BA0200B800D0E3
-:102DE000F7F1050100D1E8595AC38B467AA820743F
-:102DF0000B80BEC3000375040C01EB0224FE894660
-:102E00007AC324038886C3008AA6A8008ADC80E4EB
-:102E1000FC0AC43AC3740B8886A80083C206EE83FA
-:102E2000EA06E8C5FFC30008183828903C04772359
-:102E300032E48BD82E8A87262E8AA6A8008ADC80C8
-:102E4000E4C70AC43AC3740B8886A80083C206EE9E
-:102E500083EA06C384C07402B0048AA6A8008ADC90
-:102E600080E4FB0AC43AC3740B8886A80083C206B8
-:102E7000EE83EA06C3908B5E3884C074343C0274DF
-:102E80003B8A86AF000C04E8E6FD8B462E3B463CB1
-:102E9000771BF7C30004751581CB000483C2028A37
-:102EA00086A50024FA8886A500EE83EA02895E38AA
-:102EB000C38A86AF0024FBE8B6FDEBF1F7C3100030
-:102EC00074EFEBED83C20CEC83EA0CC0E804888657
-:102ED000A900C3908A86A7000C018886A7008BDA18
-:102EE00080C208EE8BD3F8C38A86A70024FEEBEAE3
-:102EF0008A86A7000C02EBE28A86A70024FDEBDAA3
-:102F0000B0FFE852F2E897F2F8C3AC49E861FEF886
-:102F1000C390AC49E8EBFEF8C390AC49E835FFF844
-:102F2000C390AC49E805FFF8C3905283C206B0BF16
-:102F3000EE5283C202AC49EE5A8A86A800EE5AF8D5
-:102F4000C3905283C206B0BFEE5283C206EBE69036
-:102F5000AC493C02770D84C0750B8A86AF0024FD16
-:102F6000E80DFDF8C3508A86AF000C02E801FD5B56
-:102F700083C2088A86A700F6C301740C24DF888602
-:102F8000A700EE83EA08F8C30C20EBF2AC49E8E5B1
-:102F9000FEF8C390B80040E869F5E8F9FCE824FFC2
-:102FA000B001E8A5F6F8C390B80040E871F5E8E58F
-:102FB000FCF8C390B80010E849F5E8D9FCE804FF34
-:102FC000B008E885F6F8C390B80010E851F5E8C5F8
-:102FD000FCF8C390B80080E829F5E8B9FCE8E4FE05
-:102FE000B002E865F6F8C390B80080E831F5E8A5CE
-:102FF000FCF8C390B80020E809F5E899FCE8C4FEA5
-:10300000B004E845F6F8C390B80020E811F5E8856B
-:10301000FCF8C390AC49E8340CF8C390B8FC3B8989
-:10302000467CF8C38A86AF000C80E843FCF8C39066
-:103030008A86AF00247FEBF28A86AF000C40E82F2F
-:10304000FCF8C3908A86AF0024BFEBF2AC49A8011C
-:103050007407834E7A20EB059083667ADFE88AFD59
-:10306000F8C383C2068A86A8000C408886A800EEB2
-:1030700083EA06AC4932E489466E834E2601834ECC
-:103080004808B006E8BBDF4946F9C39083C2068A08
-:1030900086A8000C408886A800EE83EA06ACB40A35
-:1030A000F6E4EBD0E8E00BF8C390AD4949894664FB
-:1030B000A9010074198BD883E3FA750AA904007476
-:1030C0000DB8E23FEB0BE8ECF4B8AA40EB03B838DC
-:1030D00044894662F8C38A86AF00A802740A24FDB8
-:1030E000E88DFB0C02E888FBF8C3AC49E881FCF8EA
-:1030F000C390AC49E879FCF8C390E85CF57505E845
-:10310000E6FDF8C3E8CDFD36A0B41324103410E872
-:10311000260136A1B413A901007405E8FEFEEB0EEA
-:10312000A90200740432C0EB02B001E8E8FE36A147
-:10313000B413E8AB0B36A1B413C1E805250100E8D0
-:103140000CFF36A0B5132410E82BFD32C0368A26BA
-:10315000B513F6C4047409FEC0F6C4087402FEC0B8
-:10316000E8EFFD36A1B613250F00E803FC36A1B643
-:1031700013C1E804250300E888FC36A1B613C1E8B2
-:1031800005250200E8CDFC36A1B613F6C40175048E
-:1031900032C0EB0980E402D0ECB0022AC4E88CFC17
-:1031A00036F606B713407405E88DFEEB03E894FE8F
-:1031B00036F606B713207405E869FEEB03E870FEE7
-:1031C000F8C3F8C38B4638A9040075230D040089A1
-:1031D000463883C2088B462E3B463C7314834E38D8
-:1031E000108A86A70024FE8886A700EE83EA08F8E6
-:1031F000C38A86A7000C01EBEE908B4638A9040029
-:10320000740625FBFF894638F8C3AD4949E8BEFB83
-:1032100089868E00F8C3AD4949E8B2FB89869000E3
-:10322000F8C3834E2604E892FAF8C390836626FB1F
-:10323000E888FAF8C390AC4984C07507808EA30073
-:1032400004F8C380A6A300FBF8C3AC4983C2083CC2
-:1032500002760232C03C017412770B8A86A70024E2
-:10326000EF8886A700EE83EA08F8C38A86A7000CD9
-:1032700010EBEE905283C206B0BFEE5283C204AC94
-:1032800049EE5A8A86A800EE5AF8C3905283C206C5
-:10329000B0BFEE5283C208EBE690AC49F8C3AC492C
-:1032A000E8B4EE7303E8F7EEF8C38A86AF00247F34
-:1032B000E8BDF9B8F000E866F2816626FFF3E8237E
-:1032C000FAE8D2F9F8C3B88000E837F2804E270850
-:1032D000E811FAE8C0F9F8C3B88000E841F2816665
-:1032E00026FFF7E8FEF9E8ADF9F8C390B81000E85A
-:1032F00011F2804E2704E8EBF9E89AF9F8C3B81008
-:1033000000E8FFF1816626FFFBE8D8F9F8C3AC4975
-:10331000F8C383C2068A86A8000C408886A800EEFF
-:1033200083EA06F8C39083C2068A86A80024BFEB0E
-:10333000EA90AC498AE080C20AEC80EA0AA82074CC
-:10334000058AC4EEF8C30651578B4E24E3344989ED
-:103350004E24FF461A8E46028B7E228AC4AA897E9C
-:10336000228B462624FD89462675298A86A500A833
-:1033700002752180C2020C028886A500EE80EA0256
-:10338000EB12C47E003B7E1E760A4F268825897E7E
-:1033900000FF461A5F5907F8C390ACAD83E9038577
-:1033A000C074053D00207205B8FFFFEB03C1E003C8
-:1033B0003B8694007426898694008BD85283C2067B
-:1033C0008A86A8008AE00C80EE83EA068AC3EE8330
-:1033D000C2028AC7EE83C2048AC4EE5AF8C3B08818
-:1033E0008886BC00E88CF233DB8A86A500A80274CC
-:1033F0000380CB01A805740380CB02A80874038066
-:10340000CB04F686A70010740380CB108A86A9002F
-:10341000F6C304750A83C20CEC83EA0CC0E8048A84
-:10342000E08A86AF00A8807408F6C401750380CBDB
-:1034300020F686A70002750AF74638040074038058
-:10344000CB40889EBE00FE86B400B00AE8F3DBF8ED
-:10345000C3FE86B400B00AE8E8DBF8C3AC493C021E
-:103460007437771084C07406804E3801F8C38066C4
-:1034700038FEF8C38B463825FFF7894638A9000483
-:1034800075EA8A86A500A80175E20C0583C2028848
-:1034900086A500EE83EA02F8C3814E3800088A86CA
-:1034A000A500A80174C624FAEBE2AD4949F8C3901F
-:1034B000E811FAFE86B900B00EE886DBF8C3B0FF6B
-:1034C000E8BFECF8C39083667AFBB000E873DBF8E2
-:1034D000C390AC49E853D9721136881E1A0136A040
-:1034E0008E120AC352BA0001EE5AF8C3AC4932E454
-:1034F00036A38612050600368B1E88122BD8368915
-:103500001E8A12F8C390AD8BD8AD83E90403C32B98
-:103510004676894678F7467A0200740A83667AFD11
-:10352000B80000E81CDBF8C3061607AC49250F00FD
-:103530006BC0098DBEFD0003F8AC49250F00AA85BC
-:10354000C074082BC8518BC8F3A459E827F0E8448D
-:103550000307F8C333C0AC4936A3B21336A3B01384
-:10356000F8C383667AEFE82C03F8C390834E7A1091
-:10357000EBF4E89BF0F8C390AD3C19770E3C19775B
-:103580000A8BF881E7FF0088A6C400F8C390834E39
-:103590002620AC4932E4D1E08BD8C1E30203C389D1
-:1035A000466E834E4804B006E897DA4946F9C39060
-:1035B000FE86B300B00AE889DAF8C39033C0AC499C
-:1035C0006BC00A89868A00F8C390AC4932E43D0A90
-:1035D000007705B80A00EB083D5A007203B85A009C
-:1035E00051F7D80564008BC88B4644F7E1B96400F5
-:1035F000F7F189464659F8C3AC49E885EBF8C39022
-:10360000AC4984C07507816638FFFDF8C3814E3828
-:103610000002F74638400075088A86A9008886AA05
-:1036200000F8C3905156E87F0C5E59F8C390FE86AF
-:10363000B600B00AE80BDAF8C390FE86B700B00A0D
-:10364000E8FFD9F8C390FE86B800B00AE8F3D9F8CD
-:10365000C39000905155AC2EA2523633C9AD8BF9B0
-:10366000C1E705A9010074232E8BAD4400837E08B9
-:103670000074182E803E523601740960B004E8BB15
-:103680000C61EB0760B0FBE8EC0C614747D1E875D3
-:10369000D24183F90472C65D5983E905F746384083
-:1036A000007405E887EAF8C3E88DEAF8C39036C6E7
-:1036B00006C81301F8C333C0AC4936A38012AC4925
-:1036C000362B068812F7D836A38212F8C390DE266E
-:1036D000DE26EC26F226F826FE2604270E271627DD
-:1036E0001E2726272E273427BE34C634D2343A2745
-:1036F000782780279427A027B427C027D427E0273E
-:10370000F42700281028EC34DE261E2826282C2832
-:10371000322838284E288A28063528359828BE2889
-:10372000D228DE28E628543562356C35EE28C029CB
-:10373000C829CE29E02972357835F029FC298E3543
-:10374000082A122A1C2AB035362ABC355A2A622A7F
-:10375000682ACA357C2AF835882AA62AB82ACC2AAB
-:10376000DE2AF22A00360A2B242B2436382B4C2B47
-:10377000842B2E363A3646365436E82BAE36402C5D
-:10378000622CB6367028DE26DE26D42EE82EF02EE9
-:10379000F82E002F0A2F122F1A2F222F2A2F422FF6
-:1037A000BE34C634D234502F8C2F942FA82FB42F70
-:1037B000C82FD42FE82FF42F083014301C30EC34ED
-:1037C000DE2624303030383044304C306230A43083
-:1037D00006352835AA30CE30D630EA30F2305435AE
-:1037E00062356C35FA30C231C231C431FA317235CA
-:1037F00078350A3216328E3522322C323632B035D6
-:103800004A32BC3574328C329A32CA359E32F8351F
-:10381000AA32C632D832EC32FE320E3300361233C0
-:103820002633243632339A33DE332E363A36463652
-:1038300054365C34AE36AA34B034B6368C30E32815
-:10384000F7463840007532E8E3E833C0AC493D5BE9
-:103850000077198BD8D1E32EFF97CE36720B85C92E
-:1038600075E88B4648E81A0CC34E41C36A001FC670
-:103870000693120C9C0EE863DAE8BCE833C0AC494E
-:103880003D5B0077E78BD8D1E32EFF97863772D95F
-:1038900085C975E8C3F7467A1000750F83BE8400AA
-:1038A000007408B8483A89868000C381BE8000EC65
-:1038B0003C74F783BE8800007505B8EC3CEBE7F775
-:1038C000467A080075401E608B8E88003B4E7477E8
-:1038D000333B4E78772EC47E108BDF26033D47475F
-:1038E00033C08ED88DB6F4008BC1F7467A010075CF
-:1038F0001DF3A4260107294678014676294674B0AF
-:103900000CE83ED7611FC78688000000EBACE3E3FC
-:103910005090AC247FAAE2FA58EBD8908B8E8800A6
-:10392000E3468B9E8A0085DB743EBA50FFED2B8602
-:1039300082003BC372378DB6F400C47E108BDF2645
-:10394000033D47478BC1161FF7467A01007524F3E4
-:10395000A4260107294678014676294674C7868839
-:10396000000000B00CE8DAD683667AF7C3B000E84E
-:10397000D0D6C3E3DC50AC247FAAE2FA58EBD29055
-:103980001E6033C08ED88DB6FD008B8688008B9666
-:1039900084003A0475108BDE468BC88DBEF400F3AC
-:1039A000A674668BF39083C6094A75E68DB6FD0052
-:1039B0008B9684003A0473108BDE468BC88DBEF460
-:1039C00000F3A674768BF39083C6094A75E68DB62C
-:1039D000F400ACF7467A01007402247F1EC55E1025
-:1039E0008B37884002468937FF4E78FF4676FF4E78
-:1039F000741F8B8E880049898E8800E3438DB6F44E
-:103A0000008BFE46F3A4E97DFFC576108B1C85DB99
-:103A1000740803F383C60383E6FE8B8684002BC2FF
-:103A2000B48089044646C7040000897610834E7A24
-:103A300004C78688000000611FF9C333C0611FC33B
-:103A4000B08084C0611FC3908B4E782B8E88007627
-:103A50002789B68C008B5E743BCB72028BCB3BC844
-:103A600072028BC88BC1E34433D28EC28BD183BE2A
-:103A70008800007406E98E0033C0C38B5E10031FFC
-:103A8000434352F7467A0100752AAC8DBEE4008BA1
-:103A90008E8600F2AE74348807434A75ED588B5E0B
-:103AA0001001072946780146762946748BC62B8675
-:103AB0008C00C390AC8DBEE4008B8E8600F2AE7499
-:103AC0000A247F8807434A75EBEBD28886F400C747
-:103AD0008688000100582BC2740E8B5E10010729E6
-:103AE000467801467629467440E894FE72BE4A75CF
-:103AF0001583BE8A000074B4BA50FFED8986820037
-:103B0000834E7A08EBA68DBEF40003BE8800A4FFA6
-:103B1000868800E86AFE729479064A748FE95BFF32
-:103B20004A74CEEBE19050E811CC8B467439467262
-:103B300074271E565133C9C5760CAD74107809032D
-:103B4000C805010024FE03F03B761076ED294E7681
-:103B5000014E78E837CC595E1F58C390C47E1026BA
-:103B60008B1D83C30326891D4B03FBAB91AAB803AE
-:103B700000294678014676294674C390C47E1026F3
-:103B80008B1D4326891D4303FBAAFF4E78FF467613
-:103B9000FF4E74C3E8E5FFC38081848582838687F6
-:103BA00050538ADC83E30ED1EB2E8A87983B08863C
-:103BB000B000FE86B100B00AE887D45B58C3508AD3
-:103BC000C8B8FF00E895FF58C3908A86BB00E8ABF1
-:103BD000FFC3E8CBFFE8F2FFC390E8C3FFE8B4FF00
-:103BE000C39033C0E895FFC3B8FF0033C9E86CFF4A
-:103BF000C390B8FF01B110E862FFC390C3FC3BE281
-:103C00003BF23BF23BFC3BE23BE83BE83BFC3BE26C
-:103C10003BE83BE83BFC3BE23BE23BE23B00100085
-:103C20000000100000001000000010000000100054
-:103C3000000010000000100000001000000008004C
-:103C40000000080000000800000008000051538B2D
-:103C50004E3881E1FFEEA804740481C900018AE0B6
-:103C600080E4032418D0E40AC433DB8AD82E8B877F
-:103C7000FD3B89467C2E0B8F1D3C894E38D1EB2EA7
-:103C80008AA73D3C5B59C3AC493C01721D74203C82
-:103C900003722374283C08722B74303C20723774F2
-:103CA0003ABBDA3B32E4895E7EC3BBA03BEBF5BB9B
-:103CB000943BB401EBF0BBFC3BB402EBE9BBE23B51
-:103CC000B403EBE2BBBE3BB404EBDBBBCA3BAC4989
-:103CD0008886BB00EBCEBBD23BEBF3BBFC3BEBC41B
-:103CE000A9040075D1A9080075DAEBD18B5E748B3D
-:103CF0004E783BCB72028BCB3BC872028BC88BC118
-:103D0000E32CC47E108BDF26033D4747F7467A013C
-:103D100000751CF7C70100740249A4D1E9F3A5732B
-:103D200001A4260107294678014676294674C35026
-:103D300053BB7F7FF7C70100740549AC22C3AAD1EA
-:103D4000E9E31D9CAD23C3AB497414AD23C3AB4958
-:103D5000740DAD23C3AB497406AD23C3ABE2E59D3F
-:103D60007304AC22C3AB5B58EBB8E8CEC98B5E38AA
-:103D7000F7C310047501C3F7C340007405E8B8E346
-:103D8000EB03E8A8E3816638EFFBF6C310743CF65A
-:103D9000C3027406E4D80C01E6D8F6C30474118398
-:103DA000C2088A86A7000C01EE8886A70083EA086D
-:103DB000F6C308740FE88BE3720A8A86C000E638FF
-:103DC000B023E60AF7C300047501C3F7C300087502
-:103DD000F98A86A500F6C340750DA81075EC0C1085
-:103DE0008886A500E60CC3A80175DF83C2020C0516
-:103DF000EE8886A500C3B000E847D2EB0FB002E81A
-:103E0000900EEB08836638DF834E7A0233C08ED87B
-:103E1000FAA0921240A292123C05721EC60692129D
-:103E200000FBB001E86B0EFAA1260123062A01A8C7
-:103E3000017507E8E207E8610990B000E837D2FBB6
-:103E400085ED74B9FAF7467A460075C08B46783D21
-:103E50000A0072B08B4E7483F950729A836638DF11
-:103E6000C576148B463A85C07558AD85C0750FE888
-:103E7000F8FEF7467A08007493E8A0FAEB8E3B76DA
-:103E8000047621B90200394E2E7705C7462E000070
-:103E9000568B762C897604C7040000464689762C1A
-:103EA000294E2E5E85C07917F6C4107405FF567C26
-:103EB000EB03FF567E897614B00CE885D1EB86893A
-:103EC000463AFF96800029463A897614B00CE8718C
-:103ED000D1E971FF0000000000000000080410029A
-:103EE00001200000000000000000000000000000B1
-:103EF00000000000808080808080808080808080C2
-:103F000080808080808080808080808080808080B1
-:103F100080808080808080808080808080808080A1
-:103F20008080808080808080808080808080808091
-:103F30008080808080C0C0C0C0C0C0C0C0C0C0C0C1
-:103F4000C0C0C0C0C0C0C0C0C0C0C0C0C0C0C080B1
-:103F500080808000808080808080808080808080E1
-:103F60008080808080808080808080808080808051
-:103F70008080808080808080808080808080808041
-:103F80008080808080808080808080808080808031
-:103F90008080808080808080808080808080808021
-:103FA0008080808080808080808080808080808011
-:103FB0008080808080808080808080808080808001
-:103FC00080808080808080808080808080808080F1
-:103FD000808080804E417841D041F44106421842B1
-:103FE000C3908E46028B7E22897E6C806627FD8B75
-:103FF000562483FA0472E983EA028BD93BCA76021B
-:104000008BCAB00A57518BFEF2AE8BC1595F751E39
-:1040100050402BC874062BD12BD9F3A4594B4A4AD4
-:10402000B00DAAA43BCA76028BCAE313EBD42BD9FA
-:10403000F7C601007402A449D1E9F3A57301A4896C
-:104040007E222B7E6C297E24017E1A8BCB807E26DD
-:10405000027405806626FDC360B0FDE8180361C3E5
-:10406000C390E87C0272F990834E26208B466A89C1
-:10407000466E8B46480D040025BFFF894648B006B2
-:10408000E8BFCFC3897E222B7E6C017E1A297E2455
-:10409000807E26027405836626FDC360B0FDE8D5E8
-:1040A0000261C3908ABEC200EB24F7464840007507
-:1040B000B18E46028B7E22897E6C8B562483EA0A5F
-:1040C000789E03D7806627FD33C08ABEC200E3B462
-:1040D0003BFA77B0AC49932E8A87D43E9322DF75A2
-:1040E00017AAE3A03BFA779CAC49932E8A87D43E6B
-:1040F0009322DF7503AAEBD6F6C37F7505FF4666EC
-:10410000EBDFF6C340750C8BD883EB08D1E32EFFB1
-:10411000A7D43FFF46662C20EBC785C0742C894688
-:104120006A834E4840897E222B7E6C017E1A297E4E
-:1041300024807E26027408836626FDE8A301C360FE
-:10414000B0FDE8310261E89801C3E957FF908B5E4A
-:10415000664B7803895E66AA8B5E64F7C3002075A0
-:1041600003E940FFF7C3400074088A86C100AAE94A
-:1041700032FFB83200EBA3908B5E66895E6883C322
-:104180000880E3F8895E668B5E6481E3001881FB3A
-:104190000018742DAA85DB7425F746644000751855
-:1041A00081FB0010740C8B46662B4668C1E004E965
-:1041B00068FFB86400E962FF8A86C100AAAAE9E341
-:1041C000FE518B4E662B4E68B020F3AA59E9D4FEFF
-:1041D0008B5E66895E688B5E64F7C324007410C7CB
-:1041E00046660000F7C304007405B00DAAB00AAA21
-:1041F000EB489090AAF7466400407406B8D007E9EF
-:1042000018FFE99FFE90AAF7466400807406B8D0B4
-:1042100007E906FFE98DFE908B5E66895E6885DBA7
-:10422000750C8B5E64F7C310007406E976FE8B5E36
-:1042300064F7C308007427B00AAAF7C32000751FEB
-:10424000F7C300017503E95BFEF7C340007506B8CC
-:104250006400E9C5FE8A86C100AAAAE946FEAAC78B
-:1042600046660000F7C3000674F1F7C340007419F6
-:104270008A86C10081E3000681FB00047206760293
-:10428000AAAAAAAAAAAAE91BFE81E3000681FB004A
-:1042900004720E7606B89600E97FFEB86400E979EC
-:1042A000FE8B4668E973FE90368B0EDA1283F93284
-:1042B000731D1E0633C08ED88EC08D764CBFDC12A7
-:1042C00003F9A5A5A583C106890EDA12071FC3B09D
-:1042D00008E86ECDC390836648FEE893C4E8C8FF43
-:1042E000C3F6462702750F9CFA837E1A0074098074
-:1042F0004E27019DF9C3F8C35052F7463840007469
-:104300001DE834DE83C20AECA840752783EA088AD8
-:1043100086A5000C028886A500EE5A58EBD1E80C61
-:10432000DE8A86A50024FB0C028886A500E60C5ACE
-:1043300058EBBC804E27025A589DF8C30846269C6D
-:10434000FA8A8EA500F7463840007514F6C1067447
-:1043500023E8D9DD8AC124F98886A500E60C9DC32F
-:10436000F6C102740FE8D0DD83C2028AC124FD8841
-:1043700086A500EE9DC38B5E2622C3884626740167
-:10438000C3806627FD9CFA8A8EA500F74638400058
-:104390007516F6C104750FE893DD8AC124FD0C047F
-:1043A0008886A500E60C9DC3F6C10275F9E888DD94
-:1043B00083C20AECA820750E83EA088AC10C028821
-:1043C00086A500EE9DC383EA0A33C98A4E1C8B463C
-:1043D0001A3BC8731B014E2A2BC189461A1EC5768B
-:1043E00000F36E1F89760083C2028A86A500EBCD9A
-:1043F00085C0741201462A8BC81EC57600F36E1F55
-:10440000897600894E1AF6C701752380CB02895E32
-:1044100026E808C383C2028A86A50024FDEE8886AA
-:10442000A500F6C7107505B002E816CC9DC383C27F
-:10443000028A86A500EB86908BD18B46243BC876FA
-:10444000028BC82BD12BC18BD9E322806627FD8E2E
-:1044500046028B7E22F7C601007402A449D1E9F31B
-:10446000A57301A4897E22894624015E1A8BCA8025
-:104470007E26027405806626FDC360B0FDE8F6FE68
-:1044800061C350E40A84C0750A8686A10084C074A2
-:104490000AE60A580C20894648F9C35824DF8946A1
-:1044A00048F8C390FBB002E8E807FAE82E01FBB039
-:1044B00001E8DE07FAB002E8BCCBFB85ED74E5FA53
-:1044C0008E5E0AFB90FA8B46488B7640A88C75DE90
-:1044D000A820741A50E855DC58E8A6FF7310B00203
-:1044E000E85FCBEBC99025FF008BC8EB3690A801A5
-:1044F00075224683E6FE3B76087479AD8AFCB3F0FC
-:1045000022FB3AFB74E03ABEA000742EE8D2FD73A1
-:1045100077EB9B908AE024FC8846488B4E4AF6C491
-:1045200002741DE8BBFD7286E813F3897640E393BD
-:10453000834E4803894E4AE974FF25FF0F8BC890CC
-:104540008B86980085C0741A518A8EA000C0E90439
-:10455000BA0100D3E25923C2740803F1897640E915
-:1045600061FFFF5662E3F5834E4801894E4A897622
-:1045700040E93AFF814E2600108B46503B46467775
-:1045800003E852FDE927FF9088BEA000EBAC0A06C5
-:1045900090128AE0BA0601B004EEEC84C07512B045
-:1045A00004EE8AC4EE32E4A8807406C706841200C2
-:1045B0000088269012C30A0690128AE0BA0601EC1F
-:1045C000A80175EDBA08018AC4EE32E4A88074E14E
-:1045D000C7068412000088269012C39036F706247E
-:1045E0000101007530368B0EDA1280F936732633EE
-:1045F000C08EC08ED8BFDC1203F9B008E877CA8538
-:10460000ED740E8D764CA5A5A580C10680F9367295
-:10461000E9890EDA12C3C390F7062601010075F688
-:104620008B0E201385C975EE33C08EC08ED8BF2483
-:1046300013B93600B00AE83DCA85ED7506E91201E6
-:10464000E90A0133DB8A464C8AA6B300FECC780E19
-:1046500088A6B3000ADCB40AAB83E90276E28AA634
-:10466000B200FECC780E88A6B2000ADCB408AB8398
-:10467000E90276CC8AA6B100FECC78188ABEB000DA
-:10468000750488A6B00088A6B1000ADC8AE7AB836F
-:10469000E90276AC8AA6B400FECC781F88A6B400E6
-:1046A0000ADCB40BAB8A86BC008AA6BD00AB8B8645
-:1046B000BE00AB83E90676888A464C8AA6B600FE21
-:1046C000CC781988A6B6000ADCB40CABE8DBCBAB1F
-:1046D0008B462AAB83E90676748A464C8AA6B700D5
-:1046E000FECC781988A6B7000ADCB40DABE8BACBCB
-:1046F000AB8B4634AB83E90676538A464C8AA6B820
-:1047000000FECC781988A6B8000ADCB40EABA15024
-:1047100012ABA15212AB83E90676328A464C8AA6C6
-:10472000B500FECC781888A6B5000ADCB40FAB8BB8
-:10473000869A00AB8B869C00AB83E906760F84DB00
-:104740007503E9EFFEB00AE8F8C8E9E7FEB00AE849
-:10475000F0C8F7D983C1368BC10D800086C4A3226F
-:10476000134141890E2013C3A184122BC17211A3DE
-:104770008412BE2213D1E9F36F90890E2013F8C37F
-:10478000F9C3C381EF6A1374F98BC70D800086C427
-:10479000A368134747893E6613C3F7062A01010041
-:1047A00075E08B0E6613E30780F92077D54949330E
-:1047B000C08EC08ED8BF6A138BF703F983C6343B13
-:1047C000FE77C0B00EE8AEC885ED74B78A464C8A55
-:1047D000B6B900FECE781588B6B9008AA6A90080C1
-:1047E000CCC0AB84F67405B00EE856C88AB6BA00E1
-:1047F000FECE78CB8A9EA9008ABEAB008A563F8A3D
-:10480000F332F70AB6AC00C686AC000022F2744B55
-:10481000F6C608740FB402F6C3087502B403AB8081
-:10482000E6F77437F6C601740FB400F6C3017502DB
-:10483000B401AB80E6FE7423F6C602740FB404F62E
-:10484000C3027502B405AB80E6FD740FF6C60474AE
-:104850000AB406F6C3047502B407ABC686BA0000F4
-:10486000889EAB00E958FF90A184122BC17211A35E
-:104870008412BE6813D1E9F36F90890E6613F8C3F2
-:10488000F9C3A1841241412BC17223A384128BC1AD
-:10489000484832E40C8086C4EF9090909090BEDC43
-:1048A000124949D1E9F36F90890EDA12F8C3F9C3BE
-:1048B0008AC88A464CB40183EB06EF9090909090A2
-:1048C000B80100EF90909090908AC1EF90909090F6
-:1048D00090E99700E9AC0033C08ED8891E8412C3DA
-:1048E000368B1E8412FB90FAB00CE889C785ED74F4
-:1048F000E6C5760C83FB1472DBFB90FAAD85C078BD
-:10490000AF74E28BFE03F8368B0E86123BC1770242
-:104910008BC883EB043BD977028BCB33C08A464CE0
-:10492000EF90909090908BC1EF90909090904180FC
-:10493000E1FE2BD951D1E9F36F90598BC74024FE8A
-:104940003BC674272BFE4E4E538B5E103BF3721307
-:10495000031F83C30380E3FEC7070000836E740256
-:10496000895E105B893C89760CEB8989760C3976F7
-:104970001077817208833C007403E977FFE80DBE6D
-:10498000E962FF36891E8412B00CE8B5C633C08ECA
-:10499000D8C3A184123D10007277BA04013B068887
-:1049A000127506C7067E1200008B0EDA12E30BE8C2
-:1049B000D0FE7257C7067E12FF7F8B0E2013E30BCB
-:1049C000E8A5FD7246C7067E12FF7F8B0E6613E3D5
-:1049D0000BE894FE7235C7067E12FF7FA12801A95D
-:1049E00001007503E8F9FE803E8D1200751DA1845B
-:1049F000123D200076153B0682127609A17E123BFD
-:104A0000068012720C800E901280C3B080FF167C5C
-:104A100012C3800E901240C36A001FC6069312177D
-:104A20009C0EE8B7C86A001FC6069312209C0EE8C9
-:104A3000AAC86A001FC6069312169C0EE89DC8906D
-:104A4000BA0601ECA82075CAFB90FABA0401ED90F1
-:104A5000909090903A06941277BE33DB8AD8D1E3D7
-:104A60002E8BAF4400C47E0885FF74B9F6C4C075B0
-:104A70005532C0C1E00280E4F08BF0ED9090909050
-:104A80009085C074BB8BC84180E1FE0BC68B5E5025
-:104A90004B4B2BD9789CAB8BC1404001464ED1E9A2
-:104AA000F36D90895E50897E088B462680E4EF89FD
-:104AB0004626F6C401750CF746480C007505B00291
-:104AC000E87FC5E97AFF86C48BC883E13F4180E176
-:104AD000FEE30A3C807209243FB4F0EBB0E960FFCA
-:104AE000253F0033FF8EC7BF96128BF7D1E9F36DD8
-:104AF000908BC8E848EDE947FF906A001FC606930F
-:104B0000121B9C0EE8D5C790601E0633C08ED88E4F
-:104B1000C0BA0601ECA80474E1B006EEECA28C1257
-:104B2000A8407411A18812A38412C6068D1200E851
-:104B300060FEA08C12A8807403E804FFB80080BA5D
-:104B400022FFEF071F61CF906A001FC60693121B5A
-:104B50009C0EE887C790601E0633C08ED88EC0BA00
-:104B60000601ECA80474E1BA0801ECA28C12A8407A
-:104B70007411A18812A38412C6068D1200E812FED9
-:104B8000A08C12A8807403E8B6FEB80080BA22FF99
-:104B9000EF071F61CF90EE86E0EE86E0EC86E0EC5A
-:104BA00086E080E1FEF36C9080E1FEF36E900500FC
-:104BB0007547A84B05007548A84B0500A348A84BAE
-:104BC00005003549A84B06009848964B0600BA48A0
-:104BD000964B0600C348964B0600CB48964B060002
-:104BE0002049964B06002849964B06004E4A9C4B9E
-:104BF00006007B4A9C4B05009E4AA24B0500EC4AEE
-:104C0000A24B00001E06833E4412007409A0060158
-:104C100024303C30741A8CC88ED88EC0BBAE4B8BFF
-:104C20000FE30D8B7F028B7704F3A483C306EBEFB6
-:104C3000071FC39033C0A33E01B90C01BE40018BD6
-:104C4000FE81C6B40F89048BC62BF13BC777F6A350
-:104C50003C01C3901E0660368B2E3E018B5E003BEE
-:104C6000EB742B8B7602891C89770236A13C018973
-:104C7000460036892E3C018BEBFF4E0674088B6E86
-:104C800000FF4E0675F836892E3E018B66046107DB
-:104C90001FC31E0660368B2E3E0198894606896624
-:104CA000043B6E0074108B6E00FF4E0675F836895B
-:104CB0002E3E018B660461071FC3C3901E06609CD5
-:104CC000FA33ED8EDD8B2E3C0185ED743D8B4E006D
-:104CD000890E3C018BCC8DA60A01561E06608966A2
-:104CE00004C746080F1AC7460601008B1E3E018501
-:104CF000DB741D8BC58707894600895E028BD889C6
-:104D00006F028BE19D61071FF8C39D61071FF9C307
-:104D1000892E3E01896E00896E0287E19D8BE1EB51
-:104D2000E4000D0A5465726D696E616C73207375D1
-:104D300070706F727465643A0D0A312920414E53C8
-:104D40004920636F6D70617469626C650D0A322968
-:104D500020577973652033300D0A506C6561736597
-:104D60002073656C6563743A20000D0A636F646597
-:104D7000207365676D656E743D000D0A4D6F6E6939
-:104D8000746F722076322E350A0D0A3E000D0A50DD
-:104D90006172646F6E3F000D0A4E6F206164647231
-:104DA00065737320737065636966696564000D0AD5
-:104DB0003A000D0A004C6F633D000D0A4641544114
-:104DC0004C204552524F523D000D0A4D6F6E697492
-:104DD0006F7220636F6D6D616E64733A2D0D0A20E2
-:104DE0002020442C645B5B787878783A5D7878781A
-:104DF000785D202D2064756D70206D656D6F727902
-:104E00000D0A2020204C2C6C5B5B787878783A5D1A
-:104E1000787878785D202D2064756D702073696EC8
-:104E2000676C65206C696E650D0A202020452C6535
-:104E30005B5B787878783A5D787878785D202D209B
-:104E400065646974206D656D6F72790D0A2020208C
-:104E5000462C665B5B78787878205D787878785D2A
-:104E6000202D2066696C6C206D656D6F72792070E5
-:104E70006172616772617068730D0A202020495B5E
-:104E8000787878785D202020202020202020202D78
-:104E900020776F726420696E7075742066726F6D12
-:104EA00020706F72740D0A202020695B7878787802
-:104EB0005D202020202020202020202D20627974B9
-:104EC0006520696E7075742066726F6D20706F72E8
-:104ED000740D0A2020204F78787878207878202068
-:104EE000202020202020202D206F757470757420C4
-:104EF000776F726420746F20706F72740D0A2020B7
-:104F0000206F787878782078782020202020202042
-:104F100020202D206F75747075742062797465205F
-:104F2000746F20706F72740D0A202020475B5B78CD
-:104F30007878783A5D787878785D2020202D206721
-:104F40006F746F20616464726573730D0A20202092
-:104F5000575B5B787878783A5D787878785D202050
-:104F6000202D207761746368206120776F72640D53
-:104F70000A20202043202020202020202020202024
-:104F800020202020202D20696E7465727275707447
-:104F900073206F66660D0A202020532020202020D9
-:104FA00020202020202020202020202D20696E7409
-:104FB00065727275707473206F6E0D0A20202073F5
-:104FC00020202020202020202020202020202020E1
-:104FD0002D2073696E676C6520737465700D0A20EF
-:104FE000202042787878782020202020202020203F
-:104FF0002020202D20627265616B706F696E7420B5
-:105000007365740D0A20202062202020202020209B
-:105010002020202020202020202D20627265616B1E
-:10502000706F696E7420636C6561720D0A202020B8
-:10503000522020202020202020202020202020203E
-:10504000202D207265737461727420627265616BC9
-:10505000706F696E740D0A2020207220202020209D
-:1050600020202020202020202020202D2072656755
-:105070006973746572732061742062726B70740D51
-:105080000A202020582C78206E202020202020204C
-:1050900020202020202D206578616D696E652063B9
-:1050A00068616E6E656C206E0D0A202020482C3FD2
-:1050B00020202020202020202020202020202D20E3
-:1050C00074686973206D657373616765001B5B327B
-:1050D0004A1B5B313B3148414E5349205465726D48
-:1050E000696E616C0D0A0A001B5B4B001B5B4A007A
-:1050F0001B5B324A1B5B313B3148001B5B44201B6E
-:105100005B44001B5B313B373248001B5B003B00BC
-:1051100048001B5B73001B5B75001B7A2B0B7F1B0E
-:105120007A2E0C7F1B7A2D087F1B7A2C0A7F1B7A24
-:1051300022087F1A57797365203330205465726DC9
-:10514000696E616C0D0A001B54001B59001A001E89
-:105150000008200800001B3D0000001B46000D0059
-:105160003F4464456546664767486849694F6F43F1
-:1051700063537342625272577758784C6C3C60D4D8
-:1051800057D45750585058D659D659B459B4593C99
-:10519000603C606C57485726570657905790579871
-:1051A00057485F0C5F585F335F405FA057A057FEC2
-:1051B00059FE59DC57DC5788619861C061CC61D8D1
-:1051C00061F66102622262F8564A625862605920B2
-:1051D00020666C6167733D00202061783D002020CF
-:1051E00062783D00202063783D00202064783D00F7
-:1051F000202063733D00202064733D0020206573F0
-:105200003D00202073733D00202064693D00202074
-:1052100073693D00202062703D00202073703D00C6
-:10522000202069703D00206368616E656C3D002040
-:105230002020207365673D002074695F7374723DA0
-:10524000002074695F746F733D002074695F6D6145
-:10525000783D002074695F6261733D002074695F6E
-:1052600073697A3D002074695F7374663D00207431
-:10527000695F726F6F3D002074695F666C673D0007
-:105280002074695F746F743D002072695F70636E93
-:105290003D002072695F7374723D002072695F7314
-:1052A00074663D002072695F726F6F3D0020726905
-:1052B0005F6261733D002072695F73697A3D00200F
-:1052C00072695F746F743D002072695F6D696E3D35
-:1052D000002072695F666C673D002072695F746FC1
-:1052E000733D002072695F7468723D002074685FCE
-:1052F0007374663D002074685F7374723D0020749F
-:10530000685F6261733D002074685F73697A3D0075
-:105310002074685F7472673D002074685F666C6714
-:105320003D002074685F636E743D002072685F7397
-:1053300074723D002072685F7374663D002072686D
-:105340005F6261733D002072685F73697A3D00207F
-:1053500072685F7370613D002072685F61736F3DBA
-:10536000002072685F726F6F3D002072685F666C2C
-:10537000673D00206D5F636172653D002070745F62
-:10538000666C6F3D002061735F666C6F3D0020723C
-:105390006D5F666C6F3D00202020715F696E3D007F
-:1053A0002020715F6F75743D0020715F6472616EC3
-:1053B0003D002020715F74696D3D00202020715FE9
-:1053C00066633D0020715F737461743D0020715FFE
-:1053D000646174613D0020715F6D6F646D3D0020FC
-:1053E00068616E645F6F3D002068616E645F623D5E
-:1053F000002068616E645F653D002068616E645FD7
-:10540000693D0020206F706F73743D002020746927
-:105410006D656F3D0020637573746D313D002063D1
-:105420007573746D323D0020637573746D643D0057
-:10543000207478726174653D0020727872617465C1
-:105440003D002020635F6D61703D0020635F6164FB
-:1054500064723D0020635F616973723D0020635F89
-:10546000787461673D0020635F646566723D00206B
-:10547000635F666C73683D002074786D6178733D7E
-:10548000002072695F656D733D002020635F6C735F
-:10549000723D002020635F6965723D002020635FDC
-:1054A0006663723D002020635F6D63723D002020C3
-:1054B000635F6C63723D002020635F6473733D0023
-:1054C00020635F647373693D0020635F647373726C
-:1054D0003D002020635F6973723D002020635F639D
-:1054E00061723D002020635F6566723D0020635F4E
-:1054F000657273743D0020635F65636E743D0020C8
-:10550000635F62726B633D0020635F626F6B633D3C
-:105510000020635F7265706C3D0020635F6363739E
-:10552000723D0020635F737474313D0020635F73CC
-:105530007474323D002BC08ED88EC0E8C200E8E5FE
-:1055400000FABF8400C705DC568C4D02BF0C00C7B3
-:10555000056E5E8C4D02BF0400C705BA5E8C4D021D
-:10556000E8F10090E84901E81600F490E8E500BE93
-:10557000BA4DE8090CA09312E85D0CE8C209EBE40F
-:10558000E8D50CE8C40C0AC074F68B1EF8793C0D03
-:10559000742E3C0874173C7F741383FB207FE188D2
-:1055A00087D67943891EF879E8770CEBD30BDB7447
-:1055B000CF4B891EF8798B36167AE8C10BEBC19078
-:1055C000E80200EBBBC687D679000BDB741EA0D6C1
-:1055D00079BF6051B91D008BD9060E07F2AE077571
-:1055E00017412BD9D1E32EFF977D519033C0A3F8FB
-:1055F00079BE894DE8870BC3BE8D4DE8800BEBEC7F
-:10560000BA0002B093EEB055EEBA1002B093EEB00D
-:10561000AAEEBA0002EC3C557508BA1002EC3CAA9E
-:105620007403E82FF6C3BA0402B01AEEB020EEB04D
-:1056300030EEB040EEB080EEBA0002B013EEB0072C
-:10564000EEBA0802B080EEBA0202B0BBEEBA0402B3
-:10565000B005EEC3C606CA1301C706F8790000C636
-:1056600006F67901C706D0790000C706D279000096
-:10567000C706D4790000C706FA790000C706FC798E
-:105680000000C706FE790000C706007A0000C706C2
-:10569000027ACE598C0E047AC706067A0000C70635
-:1056A000277A0000C606297A00C6062A7A00C39027
-:1056B000BE224DE8C80AE83F002C313C0177F7E8EC
-:1056C00081098B360C7AE8B50ABE6A4DE8AF0A0E3E
-:1056D00058E8F80ABE7A4DE8A40AC39060D1E38383
-:1056E000FB1873111EBA00008EDA2EFF97B7518B8C
-:1056F000EC8946101F61CF90E84F0B0AC07505E892
-:10570000560BEBF4C390833EF879017416BED7793B
-:10571000E8310A8BD0AC3C2C74043C207505E8239E
-:105720000AEEC3E9D2FE833EF8790174F6BED7795A
-:10573000E8110A8BD0AC3C2C74083C207404E9B707
-:10574000FE90E8FF09EFC3908B16067A833EF87946
-:1057500001740BBED779E8EB098BD0A3067AB02091
-:10576000E8570B8B16067AECE86F0BC38B16067A9C
-:10577000833EF87901740BBED779E8C7098BD0A3B3
-:10578000067AB020E8330B8B16067AEDE8670BC378
-:10579000FAC606F67900C390C606F67901FBC390F7
-:1057A00006E85809B020E8110B268B05E8470BB036
-:1057B00008E8060BE8030BE8000BE8FD0AB8010057
-:1057C000E8CFF4BA0202EC24017502EBDCBA06025F
-:1057D000EC07C390C706087A1000EB06C706087AE4
-:1057E0000100068E06FC798B3EFA79E80E09E80B7B
-:1057F00000893EFA798C06FC7907C390BEB24DE869
-:105800007C098B16087A52E82A09E80F0AE80C0A84
-:1058100033DBB9100090268A01E8BC09E8FD094392
-:10582000E2F4E8F709E8F40933DBB9100090268ABE
-:10583000013C2072053C7E760390B02EE8E30943DC
-:10584000E2ECBEB24DE8360983C7105A4A75B7C3B9
-:10585000068E06007A8B3EFE79E8A008893EFE7926
-:105860008C06007A578B360E7AE81209C706087A3A
-:105870001000BA0002E8E800E881FF5FBA0000E823
-:10588000DE00BEB54DE8F6088CC0E83F09B03AE846
-:1058900090098BC7E83509E87E08E8C30090E8B7AF
-:1058A00009E8A6090AC074F63C0B750683EF10EBF5
-:1058B00019903C0A750683C710EB0F903C0C7504D9
-:1058C00047EB07903C0875244F908B36FE798BC7C9
-:1058D0002BC63D000172A53D1001720483EE20909D
-:1058E00083C6108936FE79578BFEEB803C2E7508F7
-:1058F000BA0113E86A0007C3C6060A7A0232C990E1
-:105900003C30724C3C39760C245F3C4172423C4640
-:10591000773E2C072C3050E8CC085802C8FE0E0AFF
-:105920007A740FC0E104E82F09E81E090AC074F672
-:10593000EBCE26880DE8E0078AD0E823008AC13C38
-:105940002072053C7E760390B02EE8D508E970FF02
-:10595000E8C507E80A00268A05E87C08E91DFF90EB
-:10596000F606267A02750286F2528B361A7AE80D0E
-:10597000085A528AC60206247AF606267A01750665
-:10598000E89F08EB0D9032E4E80D088B361C7AE8AE
-:10599000EC075A8AC20206257AF606267A017506AF
-:1059A000E87F08EB069032E4E8ED078B361E7AE8D4
-:1059B000CC07C390068E06047A8B3E027AE83C0739
-:1059C000893E027A8C06047A07FF1E027AC3BE97CC
-:1059D0004DE8AA07CB900657BED779E866078BD863
-:1059E000E861078BC82BCB78118EC3BF0000B8FFCE
-:1059F000FF51B90800F3AB59E2F75F07C39006BE49
-:105A0000D779E83F078BD8D1E32E8B9F4400BE2681
-:105A100052E8F1088BC3E8DD08B80100E873F2E84A
-:105A2000E008BE2F52E8DD088B4718E8C808BE77AB
-:105A300052E8D1088B4726E8BC08BE5352E8C50897
-:105A40008B471EE8B008BE5C52E8B9088B4720E8D7
-:105A5000A408BE6E52E8AD088B4724E89808BE80C3
-:105A600052E8A1088B472AE88C08E89508BE38520E
-:105A7000E892088B07E87E08BE4152E887088B470A
-:105A80001AE87208BE4A52E87B088B471CE8660891
-:105A9000BE6552E86F088B4722E85A08E86308BEE3
-:105AA000D152E860088B4738E84B08BEAD52E85445
-:105AB000088B4730E83F08BEB652E848088B4732AB
-:105AC000E83308BEA452E83C088B472EE82708BEFE
-:105AD000BF52E830088B4734E81B08E82408BE8929
-:105AE00052E821088B4704E80C08BE9252E81508DA
-:105AF0008B4714E80008BE9B52E809088B472CE846
-:105B0000F407BEC852E8FD078B4736E8E807BEDA5F
-:105B100052E8F1078B473AE8DC07BEE352E8E507B5
-:105B20008B473CE8D007E8D907BE1953E8D6078B66
-:105B30004748E8C107BEFE52E8CA078B4742E8B5AE
-:105B400007BE0753E8BE078B4744E8A907BE7C534E
-:105B5000E8B2078B474CE89D07BE8553E8A6078B44
-:105B6000474EE89107BE8E53E89A078B4750E88569
-:105B700007E88E07BE2253E88B078B474AE8760773
-:105B8000BEEC52E87F078B4708E86A07BEF552E88B
-:105B900073078B4740E85E07BE1053E867078B47E3
-:105BA00046E85207E85B07BE6A53E858078B477A16
-:105BB000E84307BE3D53E84C078B4770E83707BE04
-:105BC0004653E840078B4772E82B07BE4F53E83433
-:105BD000078B4774E81F07E82807BE2B53E8250703
-:105BE0008B470CE81007BE3453E819078B4710E8C1
-:105BF0000407BE5853E80D078B4776E8F806BE61E8
-:105C000053E801078B4778E8EC06BE7353E8F506C6
-:105C10008B473EE8E006E8E906BE9753E8E6068BC8
-:105C20004752E8D106BEA053E8DA068B4754E8C5D0
-:105C300006BEA953E8CE068B4756E8B906BEB25356
-:105C4000E8C2068B4758E8AD06BEBB53E8B6068BE4
-:105C5000475AE8A106BEC453E8AA068B475CE895FC
-:105C600006E89E06BECD53E89B068B475EE8860697
-:105C7000BED653E88F068B4760E87A06BEDF53E84E
-:105C800083068B4762E86E06BEE853E877068B47CB
-:105C90007CE86206BEF153E86B068B477EE8560649
-:105CA000BEFA53E85F068B878000E84906E8520693
-:105CB000BE4254E84F068B879E00E83906BE035467
-:105CC000E842068B4764E82D06BE0C54E836068B86
-:105CD000476EE82106BE1554E82A068B878E00E839
-:105CE0001406BE1E54E81D068B879000E80706BE0A
-:105CF0002754E810068B879200E8FA05E80306BEF1
-:105D00003054E800068B879400E8EA05BE3954E871
-:105D1000F3058B879600E8DD05BE6F54E8E6058B3A
-:105D2000879800E8D005BE5D54E8D9058A87A000B1
-:105D3000E8A705BE5454E8CC058A4728E89B05BE71
-:105D40006654E8C0058A87A100E88E05E8B305BE61
-:105D50007854E8B0058A87A200E87E05BE8154E841
-:105D6000A3058A87A300E87105BE8A54E896058AD0
-:105D700087A400E86405BE9354E889058A87A500D6
-:105D8000E85705BE9C54E87C058A87A600E84A05CA
-:105D9000BEA554E86F058A87A700E83D05BEAE544E
-:105DA000E862058A87A800E83005E85505BEB754C3
-:105DB000E852058A87A900E82005BEC054E84505D9
-:105DC0008A87AA00E81305BEC954E838058A87AB5C
-:105DD00000E80605BED254E82B058A87AD00E8F935
-:105DE00004BEDB54E81E058A87AE00E8EC04BEE47E
-:105DF00054E811058A87AF00E8DF04BEED54E804DB
-:105E0000058A87B000E8D204E8F704BEF654E8F447
-:105E1000048A87B100E8C204BEFF54E8E7048A8719
-:105E2000B200E8B504BE0855E8DA048A87B300E892
-:105E3000A804BE1155E8CD048A87BB00E89B04E89E
-:105E4000C004BE1A55E8BD048A87BC00E88B04BEB6
-:105E50002355E8B0048A87BE00E87E04BE2C55E8CE
-:105E6000A3048A87BF00E87104E8960407C36006AC
-:105E70001E168BECFF4E16F7461A00027401FBB893
-:105E800000008ED88EC0892E2D7AE8CB0081661A4C
-:105E9000FFFEC6062A7A00E8D800B8005FA32B7A76
-:105EA000E85D00803E2A7A00740A814E1A0001C61D
-:105EB000062A7A00171F0761CF9060061E168BEC2A
-:105EC000F7461A00027401FBB800008ED88EC08914
-:105ED0002E2D7A81661AFFFEC6062A7A00E8920005
-:105EE000B8005FA32B7AE81700803E2A7A00740A74
-:105EF000814E1A0001C6062A7A00171F0761CF904B
-:105F0000B8F000E88CEDFF262B7AC390065356803C
-:105F10003E297A007403E83F00BED779E825028B5A
-:105F2000D8A3277A2E8A07A2297AB0CC2E88075EBA
-:105F30005B07C3C6062A7A00B80A5FA32B7AC39010
-:105F40008B2E2D7AE82B00C3C6062A7A01E80800BA
-:105F5000B80A5FA32B7AC39057803E297A00740F4A
-:105F60008B3E277AA0297A2E8805C606297A005FFB
-:105F7000C390BEB24DE80602BED851E80002FF76DB
-:105F80001458E84702BEDE51E8F301FF760E58E8E8
-:105F90003A02BEE451E8E601FF761258E82D02BE4F
-:105FA000EA51E8D901FF761058E82002BE1452E801
-:105FB000CC01FF760A58E81302BE1A52E8BF01FF6F
-:105FC000760C58E80602BECF51E8B201FF761A58A7
-:105FD000E8F901BEB24DE8A501BEF051E89F01FF0E
-:105FE000761858E8E601BEF651E89201FF760258AD
-:105FF000E8D901BEFC51E88501FF760458E8CC01E0
-:10600000BE0252E87801FF760058E8BF01BE085290
-:10601000E86B01FF760658E8B201BE0E52E85E0159
-:10602000FF760858E8A501BE2052E85101FF761618
-:1060300058E89801BE894DE84401C390BEC94DE8B7
-:106040003C01C33C0074053C017459C3C7060C7A7B
-:10605000CD50C7060E7AF050C706107AE850C70632
-:10606000127AEC50C706147AF450C706167AFB5021
-:10607000C706187A0351C7061A7A0B51C7061C7A4D
-:106080000E51C7061E7A1051C706207A1251C70654
-:10609000227A1651C606247A01C606257A01C6065A
-:1060A000267A03C3C7060C7A1A51C7060E7A4D51D9
-:1060B000C706107A4751C706127A4A51C706147AA2
-:1060C0004F51C706167A5151C706187A5551C7065F
-:1060D0001A7A5651C7061C7A5951C7061E7A5A5168
-:1060E000C706207A5B51C706227A5E51C606247A1B
-:1060F00020C606257A20C606267A02C3A1F879486A
-:106100007414BED779E83C008BF8AC3C3A75078E26
-:10611000C7E830008BF8C3908BC72B06FE798AF056
-:10612000240F8AD002D002D080C20BC0EE0480C6F9
-:1061300003043DC38CC0E89300B03AE8E4008BC789
-:10614000E88900C35133C990AC3C2074FB900AC06D
-:1061500074262C3072223C0976143C11721A2C07DA
-:106160003C0F760A3C2A72102C203C0F770A98C10B
-:10617000E10403C8ACEBD7904E8BC159C390068C99
-:10618000C88EC0E8020007C3268A04460AC0740607
-:10619000E88F00EBF390C3900BC0747A5133D2B9FF
-:1061A000E803F7F18BCAE803008BC159BA6400F623
-:1061B000F2E80C008AC498B20AF6F2E802008AC437
-:1061C000500AF074050430E8580058C386C4E80744
-:1061D0000086C4E80200C390C1C804E80800C1C03A
-:1061E00004E80200C3905350240FBBCA622ED7E8C4
-:1061F0003000585BC39086C4E8070086C4E80200FC
-:10620000C39050B908008AE032C0D1C00430E81110
-:1062100000E2F558C390B030E80700C3B020E801B1
-:1062200000C3568B36D0798884D0774681E6FF014B
-:10623000FF06D4798936D079813ED479FE0175087C
-:1062400056E814005EEBF1905EC3BA0202EC240142
-:106250007404BA0602ECC390803EF67900740960BB
-:10626000B80100E82CEA6190BA0202ECA804742894
-:106270008B36D279833ED47900741D8A84D07746D8
-:1062800081E6FF018936D279FF0ED479BA0602EE93
-:10629000BA0202ECA80475DCA1D479C352BA060292
-:1062A000EE5AC3905250BA0202ECA8047408585A2D
-:1062B000E8E9FFF9C390585AF8C35250BA0202EC09
-:1062C000A80474FB585AE8D3FFC330313233343555
-:1062D0003637383941424344454653508AE080E4DA
-:1062E0000FBBCA62C0E8042ED7E8CEFF8AC42ED7FF
-:1062F000E8C7FF585BC386E0E8DFFF86E0E8DAFF27
-:10630000C390BEB24D502EAC3C007405E8ABFFEB21
-:10631000F558C390C808000056578B7604BF040098
-:10632000C746FC0000C746FA0000C746F8000083D5
-:106330007E0600750E56E8B60E590BC075058BC764
-:10634000E95B018B46FC8946FE0BFF7505B8010031
-:10635000EB0233C05056E8A40D5959B4008946FCED
-:106360008B5EFC83FB087603E92B01D1E32EFFA7AC
-:10637000B264B80300E92601837EFA007414C746AC
-:10638000FA00008A445898508A44599850E8C20F3D
-:106390005959837EF800740AC746F8000056E89BF6
-:1063A0000859837E060075058BC7E9F10083FF0459
-:1063B0007503E9E6008BC7E9E400837EFE00750300
-:1063C000BF0200E9D500837EFE007503BF0100E92E
-:1063D000C9008B5EFE83FB077603E98600D1E32EBE
-:1063E000FFA7A26433FFE97F00BF0400807C580F41
-:1063F0007422837EF800751CFE44586A0856E87EB5
-:106400000C59598A445804805056E8720C5959C79F
-:1064100046FA0100837EF800740AC746F800005669
-:10642000E8190859EB42BF0400807C5800742283AD
-:106430007EF800751CFE4C586A0856E8410C595904
-:106440008A445804805056E8350C5959C746FA0119
-:1064500000837EF800740AC746F8000056E8DC079F
-:1064600059EB05BF0400EB00EB31BF0400EB2CC778
-:1064700046F801006A0856E8050C5959807C58090D
-:106480007D04B00FEB02B00004805056E8F00B59C9
-:1064900059BF0400EB05BF0400EB00E9A5FE5F5EF9
-:1064A000C9C3E4636364636463646364E963266427
-:1064B00051647863BA63C6639664D2636A646A643B
-:1064C0006F647263C808000056578B76048B7E0891
-:1064D0006A0156E8A90B59598A4606C0E0060480AD
-:1064E0005056E89A0B5959C746FE0000897EF8EBD2
-:1064F00003FF46FE8B5EF8FF46F8803F0075F2838F
-:106500007EFE107D25B810002B46FED1F88946FC92
-:10651000C746FA0000EB0B6A2056E8620B5959FF98
-:1065200046FA8B46FA3B46FC7CEDEB0C8BDF478A48
-:10653000075056E8490B5959803D0075EF6A0256DD
-:10654000E83C0B5959EB005F5EC9C3C80400005614
-:10655000578B7E04C746FE0000BE1400E909018B7C
-:106560005EFE83C3042BDF8A87AC0B88445AC64483
-:1065700058088A46FE884459C744060000C6441994
-:1065800000C6441A00C6441B00C6441D0DC6441E66
-:1065900003C6441F00C6442000C6442100C6445B15
-:1065A00000C6445D00C6445E00C6445F00C6446049
-:1065B00000C746FC0000EB0D8B5EFCD1E3C740300A
-:1065C0000000FF46FC837EFC107CEDC746FC00000B
-:1065D000EB0A8B5EFCC6405000FF46FC837EFC0449
-:1065E0007CF0C744540000C7445600008A445A98BF
-:1065F000BAF80023D0B805000BC28946FC9CFA8A81
-:1066000046FCBAFE00EEBA0000EC9D24088846FC69
-:10661000837EFC007502EB4AFF76FEE87A0C59682F
-:10662000350256E8320A59590BC07534683802569B
-:10663000E8250A59590BC0752768420256E8180A1E
-:1066400059590BC0751A684C0256E80B0A59590B78
-:10665000C0750D68560256E8FE0959590BC0740200
-:10666000EB00FF46FE83C662397EFE7D03E9EFFE46
-:10667000EB005F5EC9C3C808000056578B4604BADA
-:106680006200F7EA0514008BF0837E06007405B8FB
-:106690001000EB03B808008944048A460888445C6B
-:1066A00056E85904598BF88BC78944568944548A53
-:1066B000445D88442F0BFF751D68C20F6A0156E8C0
-:1066C00002FE83C406EB006A0156E847FC59590BE9
-:1066D000C075F4BF0100897EFAB90500BBE96A2ED6
-:1066E0008B073B46FA74074343E2F4E9A4032EFF09
-:1066F000670AC744060200C74408F4088B5E04D149
-:10670000E38B87FC0889440A33C08BF8894454E939
-:10671000800356E8BB0559BF01008A445D88446088
-:10672000E96F03837C04087530807C5C0175158AF1
-:10673000445DB400D1E08BD8FFB7E40856E8F70811
-:106740005959EB138A445DB400D1E08BD8FFB7C42C
-:106750000856E8E2085959EB2E807C5C0175158AD1
-:10676000445DB400D1E08BD8FFB7D40856E8C70821
-:106770005959EB138A445DB400D1E08BD8FFB7B40C
-:106780000856E8B20859596A0156E887FB59598BEF
-:10679000D883FB03772AD1E32EFFA7E16ABF01006C
-:1067A0008A445D88445EEB188A445D04FF240788B0
-:1067B000445DEB0C8A445DFEC0240788445DEB0019
-:1067C000E9CF028A445DB400D1E08BD8FFB7FD0267
-:1067D00056E863085959681D0356E85A0859596A1A
-:1067E0000156E82FFB59598BD883FB037736D1E349
-:1067F0002EFFA7D96ABF01008A445D88445FEB245D
-:106800008A445D04FF8A540480C2FF22C288445D2A
-:10681000EB128A445DFEC08A540480C2FF22C28803
-:10682000445DEB00E96B028B5C0683C3FED1E38B16
-:10683000400889048B1CFF77066A0056E885FC83B4
-:10684000C4068B5C064BD1E38B40088944028B5C09
-:1068500002FF77066A0156E86AFC83C4066A01569D
-:10686000E8B1FA59598BD883FB037603E91F02D1AB
-:10687000E32EFFA7D16A8B5C028B47048944028B0D
-:106880005C02803F44750D8B5C028A4701B4003B7B
-:1068900044047DE28B4604D1E08B1C03D88B440278
-:1068A0008947088B5C064BD1E38B4402894008E999
-:1068B000DE018B5C028B47028944028B5C02803FC5
-:1068C00044750D8B5C028A4701B4003B44047DE2B1
-:1068D0008B4604D1E08B1C03D88B44028947088B7C
-:1068E0005C064BD1E38B4402894008E9A201BF0159
-:1068F00000E99C018B5C028A07B4008946F8B90C58
-:1069000000BBA16A2E8B073B46F874074343E2F4B1
-:10691000E977012EFF67188B4604D1E08B5C0203F8
-:10692000D88B47088B5C06FF4406D1E38940088B6F
-:106930001C807F010074128B5C028A47018B1C8AC9
-:106940005701B6008BDA884018E94001FF4C06E990
-:106950003A018B5C028A47018B1C8A5701B6008B77
-:10696000DA884018E925018B5C028A47018B1C8A72
-:106970005701B6008BDA884018FF4C06E90D018BF1
-:106980005C028A47018B1C8A5701B6008BDA3040C3
-:1069900018E9F800B8F0108BF88944548A445F88ED
-:1069A000445DE9E7008A441C983D020074073D03FA
-:1069B000007402EB07C746FE0000EB2B8A441C98CC
-:1069C000D1E08BD8FFB7690256E86B0659596A01C6
-:1069D00056E840F959598946FE837EFE00740683C5
-:1069E0007EFE0375E9EB00837EFE0374628A441C1D
-:1069F00098D1E08BD8FFB76D0256E83A0659595640
-:106A0000E84D97598946FC8B5EFC83EBFE83FB03C4
-:106A10007733D1E32EFFA7996A68AC0256E81706D0
-:106A20005959EB23688F0256E80C065959EB186840
-:106A3000750256E801065959EB0D68C60256E8F68C
-:106A4000055959EB02EB006A0156E8C7F85959BFDE
-:106A50000100EB3868DD0256E8DC0559596A015639
-:106A6000E8B1F85959BF0100EB22B8D0308BF88952
-:106A700044548A446088445DEB12B8E0208BF88966
-:106A800044548A445E88445DEB02EB00EB02EB0069
-:106A9000EB00E941FC5F5EC9C3196A246A2F6A3AB8
-:106AA0006A0000010002000400410042004300446B
-:106AB00000800081008200FF001769546A7A6AA58D
-:106AC00069526994696A6A676952697F6967694C42
-:106AD00069F4687668B268EE68F56700681268F570
-:106AE000679D67A867B4679D6700000100F010E02C
-:106AF00020D0302768F266C36723671267C8040096
-:106B00000056578B76048A4459988946FC6A098B4B
-:106B100046FC05840150E8930859598BF88BC7252A
-:106B200000F03D001075558BC725F0003DF0007555
-:106B30004B8BC725000FC1F8088946FE8B44043BE8
-:106B400046FE7D0533C0E9EF008BC7250F00BA0F65
-:106B5000002BD03B56FE740533C0E9DB00C744026E
-:106B600004098A46FE88445F88445D8B5EFCD1E35D
-:106B7000C787FC080409B8F010E9BC008BC72500E2
-:106B8000F03D002075528BC725F0003DE0007548B0
-:106B90008BC725000FC1F8088946FE837EFE087E5C
-:106BA0000533C0E992008BC7250F00BA0F002BD028
-:106BB0003B56FE740533C0EB7F90C744020C098A34
-:106BC00046FE88445E88445D8B5EFCD1E3C787FC4B
-:106BD000080C09B8E020EB608BC72500F03D0030C1
-:106BE00075528BC725F0003DD00075488BC7250036
-:106BF0000FC1F8088946FE8B44043B46FE7D0433F2
-:106C0000C0EB358BC7250F00BA0F002BD03B56FECB
-:106C1000740433C0EB22C7440214098A46FE884438
-:106C20006088445D8B5EFCD1E3C787FC081409B81B
-:106C3000D030EB0433C0EB005F5EC9C3C806000070
-:106C4000568B76046A0856E8350459598A44580424
-:106C5000805056E8290459598B44543B4456750AD0
-:106C60008A445D3A442F7502EB648B445489445640
-:106C70008B5C028A470188442F8A445DB400C1E0DE
-:106C8000088B54540BD08A445DB400BB0F002BD842
-:106C90000BD38956FE6A108A445998050400990559
-:106CA000400183D2005250E8540883C4068956FC40
-:106CB0008946FA8B46FE0946FA834EFC006A19FFA4
-:106CC00076FCFF76FAE8730783C406E8FE075EC920
-:106CD000C3C81C000056578B5E048A4759988BF036
-:106CE0008B5E048A475DB4008946E6837EE6007DBC
-:106CF0000A8B5E048B4704488946E68B5E048B470B
-:106D0000043B46E67F05C746E600008B5E048A46E4
-:106D1000E688475D8BDED1E38B9F5902C647022090
-:106D20008BDED1E38B9F5902C64703308BDED1E364
-:106D30008B9F6102C64702208BDED1E38B9F6102ED
-:106D4000C64703308B46E68946FA837EFA007418FC
-:106D50008B46FABB0A0033D2F7F380C2308BDED108
-:106D6000E38B9F5902885703BB0A008B46FA33D244
-:106D7000F7F38946FA837EFA0074188B46FABB0A49
-:106D80000033D2F7F380C2308BDED1E38B9F590200
-:106D90008857028B46E68946FA837EFA0074188B80
-:106DA00046FABB0A0033D2F7F380C2308BDED1E360
-:106DB0008B9F6102885703BB0A008B46FA33D2F7D8
-:106DC000F38946FA837EFA0074188B46FABB0A00F0
-:106DD00033D2F7F380C2308BDED1E38B9F61028820
-:106DE00057028B5EE6D1E3FFB712026A00FF76041A
-:106DF000E8D1F683C40668D30F6A01FF7604E8C3BE
-:106E0000F683C406FF76E656E8019359598956F28F
-:106E10008946F0FF76E656E8149359598956EE896B
-:106E200046EC9CFAC45EF0268B078946EAC45EEC09
-:106E3000268B078946E8BA50FFED8946FE9DC74676
-:106E4000E40100E8EEA0BA50FFED8946FC8B46FC59
-:106E50002B46FE3DE8037303E980019CFABA50FF1C
-:106E6000ED8946FC8B46FC2B46FE8946F8C45EF055
-:106E7000268B072B46EA8946F6C45EF0268B0789E7
-:106E800046EAC45EEC268B072B46E88946F4C45ECE
-:106E9000EC268B078946E8BA50FFED8946FE9D81B6
-:106EA0007EF8E803761CFF76F8FF76F6E87601595F
-:106EB000598946F6FF76F8FF76F4E8680159598952
-:106EC00046F4BF0E00EB178BDED1E38B9F5902C651
-:106ED00001208BDED1E38B9F6102C601204783FF37
-:106EE0001176E48BDED1E38B9F5902C6470D308BC0
-:106EF000DED1E38B9F6102C6470D30837EF60977B2
-:106F000005B80D00EB26837EF6637705B80E00EB1F
-:106F10001B817EF6E7037705B80F00EB0F817EF645
-:106F20000F277705B81000EB03B811008BF8EB259D
-:106F30008B46F6BB0A0033D2F7F380C2308BDED12A
-:106F4000E38B9F590288114FBB0A008B46F633D260
-:106F5000F7F38946F6837EF60075D5837EF40977CC
-:106F600005B80D00EB26837EF4637705B80E00EBC1
-:106F70001B817EF4E7037705B80F00EB0F817EF4E9
-:106F80000F277705B81000EB03B811008BF8EB253D
-:106F90008B46F4BB0A0033D2F7F380C2308BDED1CC
-:106FA000E38B9F610288114FBB0A008B46F433D2FA
-:106FB000F7F38946F4837EF40075D58BDED1E3FFC9
-:106FC000B75902FF7604E86E0059598BDED1E3FF12
-:106FD000B76102FF7604E85E0059596A00FF760443
-:106FE000E831F359598BD883FB04771FD1E32EFF87
-:106FF000A71B70EB22C746E40000FF4EE6EB0CC770
-:1070000046E40000FF46E6EB02EB00837EE40074FA
-:1070100003E92AFEE9D4FC5F5EC9C3F36FF56FFF95
-:107020006FF36F0970558BEC8B4604B9E803F7E1F9
-:107030008B4E06F7F15DC3558BEC568B7606EB0E47
-:107040008BDE468A0750FF7604E833005959803CAE
-:107050000075EDEB005E5DC3558BEC568B7606EB51
-:10706000148BDE468A0750FF7604E8450059590B19
-:10707000C07402EB07803C0075E7EB005E5DC3C89F
-:10708000020000568B76048A445A988946FE9CFA80
-:107090008A46FEBAFE00EEBA0200ECA80274069D13
-:1070A000E8919EEBE9BA00008A4606EE9DEB005E91
-:1070B000C9C3C8040000568B76048A445A9889468E
-:1070C000FEE8E6A18946FCE8E0A12B46FC3DB80BB2
-:1070D0007605B80100EB239CFA8A46FEBAFE00EE64
-:1070E000BA0200ECA80274069DE8489EEBD9BA00EB
-:1070F000008A4606EE9D33C0EB005EC9C3C804009B
-:107100000056578B7604837E0600740756E8030109
-:1071100059EB0556E8A200598846FF807EFF0877A4
-:10712000068A46FFE98400807EFF0F7603EB7990A4
-:107130008A46FFB4002D0A008BD883FB047767D101
-:10714000E32EFFA7AF71B000EB6156E86B0059B4B6
-:1071500000250F008946FC56E85E0059B4008BF804
-:1071600056E8550059B400C1E0088BD703D08BFA1C
-:107170008B5EFCD1E3897830EB2E56E83B005988D2
-:10718000445BEB2456E831005988445056E8290006
-:107190005988445156E821005988445256E819004C
-:1071A00059884453EB02EB00E95BFF5F5EC9C346BD
-:1071B00071A6714A717A718471C8040000568B7689
-:1071C000048A445A988946FE9CFA8A46FEBAFE0012
-:1071D000EEBA0200ECA80175069DE8579DEBE9BAEE
-:1071E0000000EC8846FD9D8A46FDEB005EC9C3C8E1
-:1071F000020000568B76048A445A988946FE9CFA0F
-:107200008A46FEBAFE00EEBA0200EC32E424019D8A
-:107210005EC9C3C8060000568B76048A445A988912
-:1072200046FEE885A08946FAE87FA02B46FA3DB8DD
-:107230000B7604B008EB249CFA8A46FEBAFE00EEF8
-:10724000BA0200ECA80175069DE8E89CEBDABA00EA
-:1072500000EC8846FD9D8A46FDEB005EC9C3558B58
-:10726000EC568B56048A4606EE33F6EB035058462E
-:1072700083FE147CF85E5DC3C8020000568B560482
-:10728000EC8846FF33F6EB0350584683FE147CF837
-:107290008A46FFEB005EC9C3C802000056578B76D2
-:1072A00004833EB00B00751FBA8801B000EEBA86A9
-:1072B00001B000EE6A096A00683001E87D0183C40C
-:1072C00006C706B00B01006A098BC605800150E8AD
-:1072D000DA0059598BF88BC7C1E80C250F00894695
-:1072E000FE8BC7C1E808250F008B56FE83F20C3BCE
-:1072F000C275218BC7C1E804250F008B56FE83F2AF
-:10730000063BC2750F8BC7250F008B56FE83F20913
-:107310003BC2740D6A0756E838005959C746FE0744
-:10732000008A46FE0480A233028BC6BA6200F7EAE6
-:107330008A56FE8BD888976C006832028BC6BA6278
-:1073400000F7EA05140050E80EFD5959EB005F5EA6
-:10735000C9C3C8020000568B760683E60F8BC6C1F0
-:10736000E00C8BD683F20CC1E2080BC28BD683F201
-:1073700006C1E2040BC28BD683F2090BC28946FE1A
-:107380006A196A108B46049905400183D200525055
-:10739000E86B0183C4060B46FE83CA005250E89A8C
-:1073A0000083C406E82501EB005EC9C3558BEC568B
-:1073B0005733FF6A01688601E8A3FE5959B1102AC4
-:1073C0004E06D3660433F6EB2E817E0400807204F1
-:1073D000B001EB02B00050688801E881FE59596A9B
-:1073E00003688601E877FE59596A01688601E86DED
-:1073F000FE5959D16604463B76067CCD33F6EB2424
-:10740000D1E76A03688601E854FE59596A01688623
-:1074100001E84AFE5959688801E85CFE599825013F
-:10742000000BF84683FE107CD76A00688601E82DC1
-:10743000FE59598BC7EB005F5E5DC3558BEC565709
-:107440008B7E086A01688601E813FE5959B820004E
-:107450002BC750FF7606FF7604E8A20083C4068996
-:10746000560689460433F6EB47817E060080720C8F
-:107470007506837E04007204B001EB02B000506810
-:107480008801E8D9FD59596A03688601E8CFFD599A
-:10749000596A01688601E8C5FD59596A01FF7606F7
-:1074A000FF7604E8580083C40689560689460446D8
-:1074B0003BF77CB56A00688601E8A2FD59596A006D
-:1074C000688601E898FD59595F5E5DC3558BEC569F
-:1074D0006A01688601E886FD595933F6EB00688831
-:1074E00001E894FD59A80175088BC6463D64007CEF
-:1074F000ED6A00688601E865FD59595E5DC3C80400
-:1075000000008B46048B56068B4E08E306D1E0D173
-:10751000D2E2FA8946FC8956FE8B56FE8B46FCEB7E
-:1075200000C9C300000000000000000000000000CF
-:1075300050726576696F7573204D656E7500426592
-:1075400067696E00000000000000000000000000FD
-:10755000000000000000000000000000000000002B
-:10756000000000000000000000000000000000001B
-:10757000000000000000000000000000000000000B
-:1075800000000000000000000000000000000000FB
-:1075900000000000000000000000000000000000EB
-:1075A00000000000000000000000000000000000DB
-:1075B00000000000000000000000000000000000CB
-:1075C00000000000000000000000000000000000BB
-:1075D00000000000000000000000000000000000AB
-:1075E000000000000000000000000000000000009B
-:1075F000000000000000000000000000000000008B
-:10760000000000000000000000000000000000007A
-:10761000000000000000000000000000000000006A
-:10762000000000000000000000000000000000005A
-:10763000000000000000000000000000000000004A
-:10764000000000000000000000000000000000003A
-:10765000000000000000000000000000000000002A
-:10766000000000000000000000000000000000001A
-:10767000000000000000000000000000000000000A
-:1076800000000000000000000000000000000000FA
-:1076900000000000000000000000000000000000EA
-:1076A00000000000000000000000000000000000DA
-:1076B00000000000000000000000000000000000CA
-:1076C000000000000000000000000000506F727415
-:1076D000203000506F7274203100506F727420326D
-:1076E00000506F7274203300506F72742034005059
-:1076F0006F7274203500506F7274203600506F72B4
-:1077000074203700506F7274203800506F727420EC
-:107710003900506F727420313000506F7274203114
-:107720003100506F727420313200506F727420310A
-:107730003300506F727420313400506F72742031F6
-:1077400035009C01A301AA01B101B801BF01C60126
-:10775000CD01D401DB01E201EA01F201FA010202EA
-:107760000A02080000078100038080809F919591A4
-:107770009F000381848E95848484840003828484A2
-:107780008484958E8400048800B20BC60BDA0BEE5D
-:107790000B020C160C2A0C3E0C520C770C9C0CBEE7
-:1077A0000CE00C020D01802054657374205061734D
-:1077B000736564201F20507265737320800200017E
-:1077C00080204D697373696E67205278204461741C
-:1077D000611F205072657373208002000180204277
-:1077E00061642052782044617461201F20507265CA
-:1077F000737320800200018020586D7472204275DE
-:1078000073791F20507265737320800200018020FD
-:107810006E6F742063757272656E746C791F2020B0
-:10782000696D706C656D656E7465640200240D2F62
-:107830000D3A0D450D500D5B0D660D710D7C0D87DC
-:107840000D920D9D0DA80DB30DBE0DC90D53802CCD
-:107850003254442053862C334454522053822C33C8
-:10786000525453201F53812C3252442053852C32C2
-:1078700043442053832C334354532053842C3344A8
-:1078800053522053872C3252492702000180202076
-:10789000444344202D2070696E2032301F275385C9
-:1078A0002E31818263908081828384858687888956
-:1078B0008A8B8C8D8E8F27020001802020445352AA
-:1078C000202D2070696E2031311F2753842E318185
-:1078D000826390808182838485868788898A8B8C65
-:1078E0008D8E8F27020001802020435453202D20AD
-:1078F00070696E20341F2753832E318182639080FC
-:107900008182838485868788898A8B8C8D8E8F2758
-:107910000200018020205249202D2070696E203203
-:10792000321F2753872E3181826390808182838426
-:1079300085868788898A8B8C8D8E8F2702000180AF
-:107940002020445452202D2070696E20362F381F7D
-:107950002753862E3181826390808182838485863D
-:107960008788898A8B8C8D8E8F270200018020204A
-:10797000525453202D2070696E20351F2753822EBC
-:107980003181826390808182838485868788898A19
-:107990008B8C8D8E8F27020001802020527844200E
-:1079A0002D2070696E20321F2753812E30534D8158
-:1079B000826390808182838485868788898A8B8C84
-:1079C0008D8E8F27020001802020547844202D20A6
-:1079D00070696E20331F2753802E30534D81826390
-:1079E00090808182838485868788898A8B8C8D8E1E
-:1079F0008F27020001802020444344202D207069FD
-:107A00006E20351F2753852E3181826390808182BD
-:107A1000838485868788898A8B8C8D8E8F27020048
-:107A200001802020445352202D2070696E20351F84
-:107A30002753842E3181826390808182838485865E
-:107A40008788898A8B8C8D8E8F2702000180202069
-:107A5000435453202D2070696E20311F2753832EED
-:107A60003181826390808182838485868788898A38
-:107A70008B8C8D8E8F270200018020205249202D73
-:107A800020286E2E632E291F2753872E3181826373
-:107A900090808182838485868788898A8B8C8D8E6D
-:107AA0008F27020001802020445452202D2070692D
-:107AB0006E20321F2753862E31818263908081820F
-:107AC000838485868788898A8B8C8D8E8F27020098
-:107AD00001802020525453202D2070696E20371FC2
-:107AE0002753822E318182639080818283848586B0
-:107AF0008788898A8B8C8D8E8F27020001802020B9
-:107B0000527844202D2070696E20361F2753812E15
-:107B100030534D81826390808182838485868788FB
-:107B2000898A8B8C8D8E8F270200018020205478CB
-:107B300044202D2070696E20331F2753802E305330
-:107B40004D81826390808182838485868788898A3B
-:107B50008B8C8D8E8F27020001802020444344208F
-:107B60002D2070696E20351F202020202753852E60
-:107B700031818263888081828384858687270200A1
-:107B800001802020445352202D2070696E20351F23
-:107B9000202020202753842E318182638880818297
-:107BA0008384858687270200018020204354532048
-:107BB0002D2070696E20311F202020202753832E16
-:107BC0003181826388808182838485868727020051
-:107BD000018020205249202D20286E2E632E291F3F
-:107BE000202020202753872E318182638880818244
-:107BF00083848586872702000180202044545220F8
-:107C00002D2070696E20321F202020202753862EC1
-:107C10003181826388808182838485868727020000
-:107C200001802020525453202D2070696E20371F70
-:107C3000202020202753822E3181826388808182F8
-:107C40008384858687270200018020205278442083
-:107C50002D2070696E20361F202020202753812E72
-:107C600030534D8182638880818283848586872713
-:107C7000020001802020547844202D2070696E205D
-:107C8000331F202020202753802E30534D818263C4
-:107C90008880818283848586872702000180202056
-:107CA000444344202D2070696E2032301F20202054
-:107CB000202753852E318182638880818283848549
-:107CC000868727020001802020445352202D2070F7
-:107CD000696E2031311F202020202753842E3181CE
-:107CE0008263888081828384858687270200018061
-:107CF0002020435453202D2070696E20341F2020F3
-:107D000020202753832E318182638880818283845F
-:107D1000858687270200018020205249202D20706F
-:107D2000696E2032321F202020202753872E318178
-:107D30008263888081828384858687270200018010
-:107D40002020445452202D2070696E20362F381F79
-:107D5000202020202753862E3181826388808182D3
-:107D60008384858687270200018020205254532077
-:107D70002D2070696E20351F202020202753822E51
-:107D8000318182638880818283848586872702008F
-:107D900001802020527844202D2070696E20321FEF
-:107DA000202020202753812E30534D8182638880EC
-:107DB0008182838485868727020001802020547871
-:107DC00044202D2070696E20331F2020202027534F
-:107DD000802E30534D8182638880818283848586A2
-:107DE0008727020068049604B6033C040E04890346
-:107DF0005C03E20360088A08BE0738080E0895078E
-:107E00006C07E6071C057405FA05C404F004CC05EC
-:107E1000A00548057806C806420728065006180738
-:107E2000F006A0060000F408F408D40D04090409C3
-:107E30000409040942000C091C09E50D020014099B
-:107E40000409F40D43001C090C09050E0004040983
-:107E50001409120E2C092C092C092C0900003C09CC
-:107E60006C091E0E740974097409740900014C0927
-:107E70002C092D0E740974097409740900025C0937
-:107E80003C093D0E740974097409740900036C09F6
-:107E90004C094D0E7409740974097409FF002C090A
-:107EA0005C09000000058409EC095E0EF409F40980
-:107EB000F409F409000694097409680EAC0AAC0AC6
-:107EC000AC0AAC0A0007A4098409720EBC0ABC0AF9
-:107ED000BC0ABC0A0008B40994097C0ED40AD40A6E
-:107EE000D40AD40A000BC409A409830EFC0AFC0AB4
-:107EF000FC0AFC0A000CD409B409900E140B140BF4
-:107F0000140B140B0002E409C409A00E2C0B2C0B5B
-:107F10002C0B2C0B0400EC09D4090E00FF00740993
-:107F2000E40900008201FC09A40AAC0E8202040AE2
-:107F3000F409AF0E82030C0AFC09B20E8204140A83
-:107F4000040AB60E82051C0A0C0ABC0E8206240A1C
-:107F5000140AC00E82072C0A1C0AC40E8208340AB6
-:107F6000240AC80E82093C0A2C0ACC0E820A440A52
-:107F7000340AD10E82104C0A3C0AD60E820B540AE7
-:107F8000440ADB0E82115C0A4C0AE00E820C640A81
-:107F9000540AE50E82126C0A5C0AEA0E820D740A1B
-:107FA000640AEF0E820E7C0A6C0AF40E820F840AB9
-:107FB000740AFB0E82138C0A7C0A020F8214940A44
-:107FC000840A090F82159C0A8C0A100F8216A40AD3
-:107FD000940A170F8217F4099C0A1E0F8202B40A32
-:107FE000B40A260F8203AC0AAC0A2D0F8200C40A21
-:107FF000CC0A340F8201CC0ABC0A3F0F8202BC0AB1
-:10800000C40A4D0F8200DC0AF40A590F8201E40A07
-:10801000D40A630F8202EC0ADC0A6E0F8203F40AB0
-:10802000E40A7A0F8204D40AEC0A870F8200040B58
-:108030000C0B930F82010C0BFC0A9B0F8202FC0AB3
-:10804000040BA70F82001C0B240BB00F8201240B22
-:10805000140BB50F8202140B1C0BBE0F4400340B23
-:10806000A40B9C0144013C0B2C0BA3014402440BC8
-:10807000340BAA0144034C0B3C0BB1014404540BD8
-:10808000440BB80144055C0B4C0BBF014406640B68
-:10809000540BC60144076C0B5C0BCD014408740BF8
-:1080A000640BD40144097C0B6C0BDB01440A840B88
-:1080B000740BE201440B8C0B7C0BEA01440C940B17
-:1080C000840BF201440D9C0B8C0BFA01440EA40BA3
-:1080D000940B0202440F2C0B9C0B0A02171F0F2F4C
-:1080E0000000018078783A20747820637073202A29
-:1080F0002A2A2A2A0200018078783A20747820639C
-:108100007073202A2A2A2A2A0200018078783A20CD
-:10811000747820637073202A2A2A2A2A0200018098
-:1081200078783A20747820637073202A2A2A2A2AC1
-:10813000020001C078783A20726320637073202AAD
-:108140002A2A2A2A020001C078783A207263206322
-:108150007073202A2A2A2A2A020001C078783A203D
-:10816000726320637073202A2A2A2A2A020001C01F
-:1081700078783A20726320637073202A2A2A2A2A88
-:1081800002000180496E7374616C6C204C6F6F70DB
-:108190006261636B1F5072657373208020746F205F
-:1081A000737461727402000180204361626C652007
-:1081B000746F2052656D6F74651F50726573732004
-:1081C0008020746F20737461727402000180204CEF
-:1081D0006F63616C204C6F6F706261636B201F2056
-:1081E0002052756E6E696E67202E2E2E0200018061
-:1081F00052656D6F7465204C6F6F706261636B20A8
-:108200001F202052756E6E696E67202E2E2E020082
-:10821000018020496E74726E6C204C6F6F706261C9
-:10822000636B1F202052756E6E696E67202E2E2E96
-:10823000020001805472616E736D69742050617424
-:108240007465726E1F202052756E6E696E67202EE7
-:108250002E2E020001802020303A2027438000018A
-:10826000802020313A202743810001802020323AAB
-:10827000202743820001802020333A2027438300B7
-:1082800001802020343A20274384000180202035BB
-:108290003A202743850001802020363A2027438654
-:1082A0000001802020373A202743870001802020CA
-:1082B000383A202743880001802020393A2027437C
-:1082C000890001802031303A2027438A0001802034
-:1082D00031313A2027438B0001802031323A202768
-:1082E000438C0001802031333A2027438D000180E8
-:1082F0002031343A2027438E0001802031353A2046
-:1083000027438F002A2A204D61696E20204D656E1B
-:1083100075202A2A004D6F6E69746F72206120509B
-:108320006F7274004D6F6E69746F722061205369B3
-:10833000676E616C00457374696D617465204350AC
-:108340005300446961676E6F7374696373004C6FA7
-:1083500063616C204C6F6F706261636B0052656D7E
-:108360006F7465204C6F6F706261636B00496E744F
-:10837000726E6C204C6F6F706261636B005472613F
-:108380006E736D6974205061747465726E00426121
-:10839000756420526174650044617461204269749F
-:1083A000730053746F702042697473005061726976
-:1083B00074790044617461205061747465726E0058
-:1083C000547820466C6F7720436F6E74726F6C0028
-:1083D000506F7274204E756D6265720035300037D3
-:1083E0003500313130003133342E35003135300035
-:1083F00032303000333030003630300031323030FF
-:10840000003138303000323030300032343030001B
-:1084100033363030003438303000373230300039C5
-:108420003630300031392C3230300033382C343093
-:10843000300035362C3030300035372C36303000B7
-:1084400036342C3030300037362C38303000313173
-:10845000352C323030003720626974730038206266
-:1084600069747300312073746F7020626974003115
-:108470002E352073746F702062697473003220731C
-:10848000746F702062697473006E6F20706172691E
-:108490007479006F64642070617269747900657624
-:1084A000656E207061726974790073706163652014
-:1084B000706172697479006D61726B2070617269AC
-:1084C000747900436F6C756D6E7300426172626502
-:1084D0007220506F6C650055555555552E2E2E0047
-:1084E0004E6F6E6500586F6E2F586F66660043546E
-:1084F00053005072657373208020666F72206D6523
-:108500006E750028636F756E74696E672E2E2E2946
-:108510000000654E64204F6620436F4465000000F4
-:10852000000000000000000000000000000000004B
-:10853000000000000000000000000000000000003B
-:10854000000000000000000000000000000000002B
-:10855000000000000000000000000000000000001B
-:10856000000000000000000000000000000000000B
-:1085700000000000000000000000000000000000FB
-:1085800000000000000000000000000000000000EB
-:1085900000000000000000000000000000000000DB
-:1085A00000000000000000000000000000000000CB
-:1085B00000000000000000000000000000000000BB
-:1085C00000000000000000000000000000000000AB
-:1085D000000000000000000000000000000000009B
-:1085E000000000000000000000000000000000008B
-:1085F000000000000000000000000000000000007B
-:00000001FF
-/* Intelliport II loadware */
-/* -31232 bytes read from ff.lod */
if (srcid) {
srcgroup = find_qgroup_rb(fs_info, srcid);
- if (!srcgroup) {
- ret = -EINVAL;
+ if (!srcgroup)
goto unlock;
- }
dstgroup->rfer = srcgroup->rfer - level_size;
dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size;
srcgroup->excl = level_size;
qgroup_dirty(fs_info, srcgroup);
}
- if (!inherit) {
- ret = -EINVAL;
+ if (!inherit)
goto unlock;
- }
i_qgroups = (u64 *)(inherit + 1);
for (i = 0; i < inherit->num_qgroups; ++i) {
if (!buf) {
mutex_unlock(&cinode->lock_mutex);
free_xid(xid);
- return rc;
+ return -ENOMEM;
}
for (i = 0; i < 2; i++) {
*
*/
-#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64)
+#define SMB2_HEADER_STRUCTURE_SIZE __constant_cpu_to_le16(64)
struct smb2_hdr {
__be32 smb2_buf_length; /* big endian on wire */
*
*/
-#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9)
+#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_cpu_to_le16(9)
struct smb2_err_rsp {
struct smb2_hdr hdr;
static int ecryptfs_flush(struct file *file, fl_owner_t td)
{
- return file->f_mode & FMODE_WRITE
- ? filemap_write_and_wait(file->f_mapping) : 0;
+ struct file *lower_file = ecryptfs_file_to_lower(file);
+
+ if (lower_file->f_op && lower_file->f_op->flush) {
+ filemap_write_and_wait(file->f_mapping);
+ return lower_file->f_op->flush(lower_file, td);
+ }
+
+ return 0;
}
static int ecryptfs_release(struct inode *inode, struct file *file)
struct dentry *lower_old_dir_dentry;
struct dentry *lower_new_dir_dentry;
struct dentry *trap = NULL;
+ struct inode *target_inode;
lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
dget(lower_new_dentry);
lower_old_dir_dentry = dget_parent(lower_old_dentry);
lower_new_dir_dentry = dget_parent(lower_new_dentry);
+ target_inode = new_dentry->d_inode;
trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
/* source should not be ancestor of target */
if (trap == lower_old_dentry) {
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
goto out_lock;
+ if (target_inode)
+ fsstack_copy_attr_all(target_inode,
+ ecryptfs_inode_to_lower(target_inode));
fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
if (new_dir != old_dir)
fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
inode_info = ecryptfs_inode_to_private(inode);
if (atomic_dec_and_mutex_lock(&inode_info->lower_file_count,
&inode_info->lower_file_mutex)) {
+ filemap_write_and_wait(inode->i_mapping);
fput(inode_info->lower_file);
inode_info->lower_file = NULL;
mutex_unlock(&inode_info->lower_file_mutex);
struct ext3_inode_info *ei = EXT3_I(inode);
struct buffer_head *bh = iloc->bh;
int err = 0, rc, block;
+ int need_datasync = 0;
+ __le32 disksize;
uid_t i_uid;
gid_t i_gid;
raw_inode->i_gid_high = 0;
}
raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
- raw_inode->i_size = cpu_to_le32(ei->i_disksize);
+ disksize = cpu_to_le32(ei->i_disksize);
+ if (disksize != raw_inode->i_size) {
+ need_datasync = 1;
+ raw_inode->i_size = disksize;
+ }
raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
if (!S_ISREG(inode->i_mode)) {
raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
} else {
- raw_inode->i_size_high =
- cpu_to_le32(ei->i_disksize >> 32);
+ disksize = cpu_to_le32(ei->i_disksize >> 32);
+ if (disksize != raw_inode->i_size_high) {
+ raw_inode->i_size_high = disksize;
+ need_datasync = 1;
+ }
if (ei->i_disksize > 0x7fffffffULL) {
struct super_block *sb = inode->i_sb;
if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
ext3_clear_inode_state(inode, EXT3_STATE_NEW);
atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
+ if (need_datasync)
+ atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
out_brelse:
brelse (bh);
ext3_std_error(inode->i_sb, err);
const char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned val;
+ unsigned uninitialized_var(val);
ssize_t ret;
ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
const char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned val;
+ unsigned uninitialized_var(val);
ssize_t ret;
ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
err_region:
unregister_chrdev_region(devt, 1);
err:
- fc->conn_error = 1;
+ fuse_conn_kill(fc);
goto out;
}
cdev_del(cc->cdev);
}
- /* kill connection and shutdown channel */
- fuse_conn_kill(&cc->fc);
rc = fuse_dev_release(inode, file); /* puts the base reference */
return rc;
req->pages[req->num_pages] = page;
req->num_pages++;
+ offset = 0;
num -= this_num;
total_len += this_num;
index++;
wake_up_all(&fc->waitq);
wake_up_all(&fc->blocked_waitq);
wake_up_all(&fc->reserved_req_waitq);
- mutex_lock(&fuse_mutex);
- list_del(&fc->entry);
- fuse_ctl_remove_conn(fc);
- mutex_unlock(&fuse_mutex);
- fuse_bdi_destroy(fc);
}
EXPORT_SYMBOL_GPL(fuse_conn_kill);
struct fuse_conn *fc = get_fuse_conn_super(sb);
fuse_send_destroy(fc);
+
fuse_conn_kill(fc);
+ mutex_lock(&fuse_mutex);
+ list_del(&fc->entry);
+ fuse_ctl_remove_conn(fc);
+ mutex_unlock(&fuse_mutex);
+ fuse_bdi_destroy(fc);
+
fuse_conn_put(fc);
}
return -ENOTTY;
}
+/**
+ * gfs2_size_hint - Give a hint to the size of a write request
+ * @file: The struct file
+ * @offset: The file offset of the write
+ * @size: The length of the write
+ *
+ * When we are about to do a write, this function records the total
+ * write size in order to provide a suitable hint to the lower layers
+ * about how many blocks will be required.
+ *
+ */
+
+static void gfs2_size_hint(struct file *filep, loff_t offset, size_t size)
+{
+ struct inode *inode = filep->f_dentry->d_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+ size_t blks = (size + sdp->sd_sb.sb_bsize - 1) >> sdp->sd_sb.sb_bsize_shift;
+ int hint = min_t(size_t, INT_MAX, blks);
+
+ atomic_set(&ip->i_res->rs_sizehint, hint);
+}
+
/**
* gfs2_allocate_page_backing - Use bmap to allocate blocks
* @page: The (locked) page to allocate backing for
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint,
- PAGE_CACHE_SIZE >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint, writesize >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, pos, writesize);
+
if (file->f_flags & O_APPEND) {
struct gfs2_holder gh;
if (unlikely(error))
goto out_uninit;
- atomic_set(&ip->i_res->rs_sizehint, len >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, offset, len);
while (len > 0) {
if (len < bytes)
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_setxattr(dentry, name, data, size, flags);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_setxattr(dentry, name, data, size, flags);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_removexattr(dentry, name);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_removexattr(dentry, name);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
* @dinode: 1 if this block is a dinode block, otherwise data block
* @nblocks: desired extent length
*
- * Lay claim to previously allocated block reservation blocks.
+ * Lay claim to previously reserved blocks.
* Returns: Starting block number of the blocks claimed.
* Sets *nblocks to the actual extent length allocated.
*/
{
struct gfs2_blkreserv *rs = ip->i_res;
struct gfs2_rgrpd *rgd = rs->rs_rgd;
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_bitmap *bi;
u64 start_block = gfs2_rs_startblk(rs);
const unsigned int elen = *nblocks;
- /*BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));*/
- gfs2_assert_withdraw(sdp, rgd);
- /*BUG_ON(!gfs2_glock_is_locked_by_me(rgd->rd_gl));*/
bi = rs->rs_bi;
gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
for (*nblocks = 0; *nblocks < elen && rs->rs_free; (*nblocks)++) {
- /* Make sure the bitmap hasn't changed */
+ if (gfs2_testbit(rgd, bi->bi_bh->b_data + bi->bi_offset,
+ bi->bi_len, rs->rs_biblk) != GFS2_BLKST_FREE)
+ break;
gfs2_setbit(rgd, bi->bi_clone, bi, rs->rs_biblk,
dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
rs->rs_biblk++;
BUG_ON(!rgd->rd_reserved);
rgd->rd_reserved--;
dinode = false;
- trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
}
- if (!rs->rs_free) {
- struct gfs2_rgrpd *rgd = ip->i_res->rs_rgd;
-
+ trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
+ if (!rs->rs_free || *nblocks != elen)
gfs2_rs_deltree(rs);
- /* -nblocks because we haven't returned to do the math yet.
- I'm doing the math backwards to prevent negative numbers,
- but think of it as:
- if (unclaimed_blocks(rgd) - *nblocks >= RGRP_RSRV_MINBLKS */
- if (unclaimed_blocks(rgd) >= RGRP_RSRV_MINBLKS + *nblocks)
- rg_mblk_search(rgd, ip);
- }
+
return start_block;
}
if (ip->i_res->rs_requested == 0)
return -ECANCELED;
- /* Check if we have a multi-block reservation, and if so, claim the
- next free block from it. */
+ /* If we have a reservation, claim blocks from it. */
if (gfs2_rs_active(ip->i_res)) {
BUG_ON(!ip->i_res->rs_free);
rgd = ip->i_res->rs_rgd;
block = claim_reserved_blks(ip, dinode, nblocks);
- } else {
- rgd = ip->i_rgd;
+ if (*nblocks)
+ goto found_blocks;
+ }
- if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
- goal = ip->i_goal - rgd->rd_data0;
- else
- goal = rgd->rd_last_alloc;
-
- blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
-
- /* Since all blocks are reserved in advance, this shouldn't
- happen */
- if (blk == BFITNOENT) {
- printk(KERN_WARNING "BFITNOENT, nblocks=%u\n",
- *nblocks);
- printk(KERN_WARNING "FULL=%d\n",
- test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
- goto rgrp_error;
- }
+ rgd = ip->i_rgd;
- block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+ if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
+ goal = ip->i_goal - rgd->rd_data0;
+ else
+ goal = rgd->rd_last_alloc;
+
+ blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
+
+ /* Since all blocks are reserved in advance, this shouldn't happen */
+ if (blk == BFITNOENT) {
+ printk(KERN_WARNING "BFITNOENT, nblocks=%u\n", *nblocks);
+ printk(KERN_WARNING "FULL=%d\n",
+ test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
+ goto rgrp_error;
}
+
+ block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+found_blocks:
ndata = *nblocks;
if (dinode)
ndata--;
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
nfsi->attrtimeo_timestamp = jiffies;
- memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
+ memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf));
if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
else
u64 cookie, struct page **pages, unsigned int count, int plus)
{
struct inode *dir = dentry->d_inode;
- __be32 *verf = NFS_COOKIEVERF(dir);
+ __be32 *verf = NFS_I(dir)->cookieverf;
struct nfs3_readdirargs arg = {
.fh = NFS_FH(dir),
.cookie = cookie,
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
if (!ret && !datasync)
/* application has asked for meta-data sync */
ret = pnfs_layoutcommit_inode(inode, true);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
dentry->d_parent->d_name.name,
dentry->d_name.name,
(unsigned long long)cookie);
- nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
+ nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
res.pgbase = args.pgbase;
status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
if (status >= 0) {
- memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+ memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
status += args.pgbase;
}
&& (server->acl_bitmask & ACL4_SUPPORT_DENY_ACL);
}
-/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_CACHE_SIZE, and that
- * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_CACHE_SIZE) bytes on
+/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_SIZE, and that
+ * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_SIZE) bytes on
* the stack.
*/
-#define NFS4ACL_MAXPAGES (XATTR_SIZE_MAX >> PAGE_CACHE_SHIFT)
+#define NFS4ACL_MAXPAGES DIV_ROUND_UP(XATTR_SIZE_MAX, PAGE_SIZE)
static int buf_to_pages_noslab(const void *buf, size_t buflen,
struct page **pages, unsigned int *pgbase)
spages = pages;
do {
- len = min_t(size_t, PAGE_CACHE_SIZE, buflen);
+ len = min_t(size_t, PAGE_SIZE, buflen);
newpage = alloc_page(GFP_KERNEL);
if (newpage == NULL)
struct nfs4_cached_acl *acl;
size_t buflen = sizeof(*acl) + acl_len;
- if (pages && buflen <= PAGE_SIZE) {
+ if (buflen <= PAGE_SIZE) {
acl = kmalloc(buflen, GFP_KERNEL);
if (acl == NULL)
goto out;
.rpc_argp = &args,
.rpc_resp = &res,
};
- int ret = -ENOMEM, npages, i;
- size_t acl_len = 0;
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
+ int ret = -ENOMEM, i;
- npages = (buflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
/* As long as we're doing a round trip to the server anyway,
* let's be prepared for a page of acl data. */
if (npages == 0)
npages = 1;
-
- /* Add an extra page to handle the bitmap returned */
- npages++;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
for (i = 0; i < npages; i++) {
pages[i] = alloc_page(GFP_KERNEL);
args.acl_len = npages * PAGE_SIZE;
args.acl_pgbase = 0;
- /* Let decode_getfacl know not to fail if the ACL data is larger than
- * the page we send as a guess */
- if (buf == NULL)
- res.acl_flags |= NFS4_ACL_LEN_REQUEST;
-
dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n",
__func__, buf, buflen, npages, args.acl_len);
ret = nfs4_call_sync(NFS_SERVER(inode)->client, NFS_SERVER(inode),
if (ret)
goto out_free;
- acl_len = res.acl_len;
- if (acl_len > args.acl_len)
- nfs4_write_cached_acl(inode, NULL, 0, acl_len);
- else
- nfs4_write_cached_acl(inode, pages, res.acl_data_offset,
- acl_len);
- if (buf) {
+ /* Handle the case where the passed-in buffer is too short */
+ if (res.acl_flags & NFS4_ACL_TRUNC) {
+ /* Did the user only issue a request for the acl length? */
+ if (buf == NULL)
+ goto out_ok;
ret = -ERANGE;
- if (acl_len > buflen)
- goto out_free;
- _copy_from_pages(buf, pages, res.acl_data_offset,
- acl_len);
+ goto out_free;
}
- ret = acl_len;
+ nfs4_write_cached_acl(inode, pages, res.acl_data_offset, res.acl_len);
+ if (buf)
+ _copy_from_pages(buf, pages, res.acl_data_offset, res.acl_len);
+out_ok:
+ ret = res.acl_len;
out_free:
for (i = 0; i < npages; i++)
if (pages[i])
.rpc_argp = &arg,
.rpc_resp = &res,
};
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
int ret, i;
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
if (i < 0)
return i;
* are stored with the acl data to handle the problem of
* variable length bitmaps.*/
res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset;
-
- /* We ignore &savep and don't do consistency checks on
- * the attr length. Let userspace figure it out.... */
res->acl_len = attrlen;
- if (attrlen > (xdr->nwords << 2)) {
- if (res->acl_flags & NFS4_ACL_LEN_REQUEST) {
- /* getxattr interface called with a NULL buf */
- goto out;
- }
+
+ /* Check for receive buffer overflow */
+ if (res->acl_len > (xdr->nwords << 2) ||
+ res->acl_len + res->acl_data_offset > xdr->buf->page_len) {
+ res->acl_flags |= NFS4_ACL_TRUNC;
dprintk("NFS: acl reply: attrlen %u > page_len %u\n",
attrlen, xdr->nwords << 2);
- return -EINVAL;
}
} else
status = -EOPNOTSUPP;
status = decode_open(xdr, res);
if (status)
goto out;
- if (decode_getfh(xdr, &res->fh) != 0)
+ status = decode_getfh(xdr, &res->fh);
+ if (status)
goto out;
decode_getfattr(xdr, res->f_attr, res->server);
out:
memcpy(sap, &data->addr, sizeof(data->addr));
args->nfs_server.addrlen = sizeof(data->addr);
+ args->nfs_server.port = ntohs(data->addr.sin_port);
if (!nfs_verify_server_address(sap))
goto out_no_address;
return -EFAULT;
if (!nfs_verify_server_address(sap))
goto out_no_address;
+ args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port);
if (data->auth_flavourlen) {
if (data->auth_flavourlen > 1)
int vfs_fstat(unsigned int fd, struct kstat *stat)
{
int fput_needed;
- struct file *f = fget_light(fd, &fput_needed);
+ struct file *f = fget_raw_light(fd, &fput_needed);
int error = -EBADF;
if (f) {
#include "udf_i.h"
#include "udf_sb.h"
-static int udf_adinicb_readpage(struct file *file, struct page *page)
+static void __udf_adinicb_readpage(struct page *page)
{
struct inode *inode = page->mapping->host;
char *kaddr;
struct udf_inode_info *iinfo = UDF_I(inode);
- BUG_ON(!PageLocked(page));
-
kaddr = kmap(page);
- memset(kaddr, 0, PAGE_CACHE_SIZE);
memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
+ memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size);
flush_dcache_page(page);
SetPageUptodate(page);
kunmap(page);
+}
+
+static int udf_adinicb_readpage(struct file *file, struct page *page)
+{
+ BUG_ON(!PageLocked(page));
+ __udf_adinicb_readpage(page);
unlock_page(page);
return 0;
return 0;
}
+static int udf_adinicb_write_begin(struct file *file,
+ struct address_space *mapping, loff_t pos,
+ unsigned len, unsigned flags, struct page **pagep,
+ void **fsdata)
+{
+ struct page *page;
+
+ if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE))
+ return -EIO;
+ page = grab_cache_page_write_begin(mapping, 0, flags);
+ if (!page)
+ return -ENOMEM;
+ *pagep = page;
+
+ if (!PageUptodate(page) && len != PAGE_CACHE_SIZE)
+ __udf_adinicb_readpage(page);
+ return 0;
+}
+
static int udf_adinicb_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
const struct address_space_operations udf_adinicb_aops = {
.readpage = udf_adinicb_readpage,
.writepage = udf_adinicb_writepage,
- .write_begin = simple_write_begin,
- .write_end = udf_adinicb_write_end,
+ .write_begin = udf_adinicb_write_begin,
+ .write_end = udf_adinicb_write_end,
};
static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
#define DRM_FORMAT_NV16 fourcc_code('N', 'V', '1', '6') /* 2x1 subsampled Cr:Cb plane */
#define DRM_FORMAT_NV61 fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */
-/* 2 non contiguous plane YCbCr */
-#define DRM_FORMAT_NV12M fourcc_code('N', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane */
+/* special NV12 tiled format */
#define DRM_FORMAT_NV12MT fourcc_code('T', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane 64x32 macroblocks */
/*
#define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */
#define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */
-/* 3 non contiguous plane YCbCr */
-#define DRM_FORMAT_YUV420M fourcc_code('Y', 'M', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */
-
#endif /* DRM_FOURCC_H */
header-y += capi.h
header-y += cciss_defs.h
header-y += cciss_ioctl.h
-header-y += cdk.h
header-y += cdrom.h
header-y += cgroupstats.h
header-y += chio.h
header-y += coda.h
header-y += coda_psdev.h
header-y += coff.h
-header-y += comstats.h
header-y += connector.h
header-y += const.h
header-y += cramfs_fs.h
header-y += futex.h
header-y += gameport.h
header-y += gen_stats.h
-header-y += generic_serial.h
header-y += genetlink.h
header-y += gfs2_ondisk.h
header-y += gigaset_dev.h
header-y += tipc_config.h
header-y += toshiba.h
header-y += tty.h
+header-y += tty_flags.h
header-y += types.h
header-y += udf_fs_i.h
header-y += udp.h
void *dma_tx_param;
void (*init) (void);
void (*exit) (void);
- void (*reset) (void);
};
#endif
#include <linux/platform_device.h>
#include <linux/list.h>
+#include <linux/io.h>
struct ssc_device {
struct list_head list;
--- /dev/null
+/*
+ * Copyright 2012 Simon Arlott
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BCM2835_TIMER_H
+#define __BCM2835_TIMER_H
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer bcm2835_timer;
+
+#endif
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * cd1400.h -- cd1400 UART hardware info.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CD1400_H
-#define _CD1400_H
-/*****************************************************************************/
-
-/*
- * Define the number of async ports per cd1400 uart chip.
- */
-#define CD1400_PORTS 4
-
-/*
- * Define the cd1400 uarts internal FIFO sizes.
- */
-#define CD1400_TXFIFOSIZE 12
-#define CD1400_RXFIFOSIZE 12
-
-/*
- * Local RX FIFO thresh hold level. Also define the RTS thresh hold
- * based on the RX thresh hold.
- */
-#define FIFO_RXTHRESHOLD 6
-#define FIFO_RTSTHRESHOLD 7
-
-/*****************************************************************************/
-
-/*
- * Define the cd1400 register addresses. These are all the valid
- * registers with the cd1400. Some are global, some virtual, some
- * per port.
- */
-#define GFRCR 0x40
-#define CAR 0x68
-#define GCR 0x4b
-#define SVRR 0x67
-#define RICR 0x44
-#define TICR 0x45
-#define MICR 0x46
-#define RIR 0x6b
-#define TIR 0x6a
-#define MIR 0x69
-#define PPR 0x7e
-
-#define RIVR 0x43
-#define TIVR 0x42
-#define MIVR 0x41
-#define TDR 0x63
-#define RDSR 0x62
-#define MISR 0x4c
-#define EOSRR 0x60
-
-#define LIVR 0x18
-#define CCR 0x05
-#define SRER 0x06
-#define COR1 0x08
-#define COR2 0x09
-#define COR3 0x0a
-#define COR4 0x1e
-#define COR5 0x1f
-#define CCSR 0x0b
-#define RDCR 0x0e
-#define SCHR1 0x1a
-#define SCHR2 0x1b
-#define SCHR3 0x1c
-#define SCHR4 0x1d
-#define SCRL 0x22
-#define SCRH 0x23
-#define LNC 0x24
-#define MCOR1 0x15
-#define MCOR2 0x16
-#define RTPR 0x21
-#define MSVR1 0x6c
-#define MSVR2 0x6d
-#define PSVR 0x6f
-#define RBPR 0x78
-#define RCOR 0x7c
-#define TBPR 0x72
-#define TCOR 0x76
-
-/*****************************************************************************/
-
-/*
- * Define the set of baud rate clock divisors.
- */
-#define CD1400_CLK0 8
-#define CD1400_CLK1 32
-#define CD1400_CLK2 128
-#define CD1400_CLK3 512
-#define CD1400_CLK4 2048
-
-#define CD1400_NUMCLKS 5
-
-/*****************************************************************************/
-
-/*
- * Define the clock pre-scalar value to be a 5 ms clock. This should be
- * OK for now. It would probably be better to make it 10 ms, but we
- * can't fit that divisor into 8 bits!
- */
-#define PPR_SCALAR 244
-
-/*****************************************************************************/
-
-/*
- * Define values used to set character size options.
- */
-#define COR1_CHL5 0x00
-#define COR1_CHL6 0x01
-#define COR1_CHL7 0x02
-#define COR1_CHL8 0x03
-
-/*
- * Define values used to set the number of stop bits.
- */
-#define COR1_STOP1 0x00
-#define COR1_STOP15 0x04
-#define COR1_STOP2 0x08
-
-/*
- * Define values used to set the parity scheme in use.
- */
-#define COR1_PARNONE 0x00
-#define COR1_PARFORCE 0x20
-#define COR1_PARENB 0x40
-#define COR1_PARIGNORE 0x10
-
-#define COR1_PARODD 0x80
-#define COR1_PAREVEN 0x00
-
-#define COR2_IXM 0x80
-#define COR2_TXIBE 0x40
-#define COR2_ETC 0x20
-#define COR2_LLM 0x10
-#define COR2_RLM 0x08
-#define COR2_RTSAO 0x04
-#define COR2_CTSAE 0x02
-
-#define COR3_SCDRNG 0x80
-#define COR3_SCD34 0x40
-#define COR3_FCT 0x20
-#define COR3_SCD12 0x10
-
-/*
- * Define values used by COR4.
- */
-#define COR4_BRKINT 0x08
-#define COR4_IGNBRK 0x18
-
-/*****************************************************************************/
-
-/*
- * Define the modem control register values.
- * Note that the actual hardware is a little different to the conventional
- * pin names on the cd1400.
- */
-#define MSVR1_DTR 0x01
-#define MSVR1_DSR 0x10
-#define MSVR1_RI 0x20
-#define MSVR1_CTS 0x40
-#define MSVR1_DCD 0x80
-
-#define MSVR2_RTS 0x02
-#define MSVR2_DSR 0x10
-#define MSVR2_RI 0x20
-#define MSVR2_CTS 0x40
-#define MSVR2_DCD 0x80
-
-#define MCOR1_DCD 0x80
-#define MCOR1_CTS 0x40
-#define MCOR1_RI 0x20
-#define MCOR1_DSR 0x10
-
-#define MCOR2_DCD 0x80
-#define MCOR2_CTS 0x40
-#define MCOR2_RI 0x20
-#define MCOR2_DSR 0x10
-
-/*****************************************************************************/
-
-/*
- * Define the bits used with the service (interrupt) enable register.
- */
-#define SRER_NNDT 0x01
-#define SRER_TXEMPTY 0x02
-#define SRER_TXDATA 0x04
-#define SRER_RXDATA 0x10
-#define SRER_MODEM 0x80
-
-/*****************************************************************************/
-
-/*
- * Define operational commands for the command register.
- */
-#define CCR_RESET 0x80
-#define CCR_CORCHANGE 0x4e
-#define CCR_SENDCH 0x20
-#define CCR_CHANCTRL 0x10
-
-#define CCR_TXENABLE (CCR_CHANCTRL | 0x08)
-#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04)
-#define CCR_RXENABLE (CCR_CHANCTRL | 0x02)
-#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01)
-
-#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01)
-#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02)
-#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03)
-#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04)
-
-#define CCR_RESETCHAN (CCR_RESET | 0x00)
-#define CCR_RESETFULL (CCR_RESET | 0x01)
-#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
-
-#define CCR_MAXWAIT 10000
-
-/*****************************************************************************/
-
-/*
- * Define the valid acknowledgement types (for hw ack cycle).
- */
-#define ACK_TYPMASK 0x07
-#define ACK_TYPTX 0x02
-#define ACK_TYPMDM 0x01
-#define ACK_TYPRXGOOD 0x03
-#define ACK_TYPRXBAD 0x07
-
-#define SVRR_RX 0x01
-#define SVRR_TX 0x02
-#define SVRR_MDM 0x04
-
-#define ST_OVERRUN 0x01
-#define ST_FRAMING 0x02
-#define ST_PARITY 0x04
-#define ST_BREAK 0x08
-#define ST_SCHAR1 0x10
-#define ST_SCHAR2 0x20
-#define ST_SCHAR3 0x30
-#define ST_SCHAR4 0x40
-#define ST_RANGE 0x70
-#define ST_SCHARMASK 0x70
-#define ST_TIMEOUT 0x80
-
-#define MISR_DCD 0x80
-#define MISR_CTS 0x40
-#define MISR_RI 0x20
-#define MISR_DSR 0x10
-
-/*****************************************************************************/
-
-/*
- * Defines for the CCSR status register.
- */
-#define CCSR_RXENABLED 0x80
-#define CCSR_RXFLOWON 0x40
-#define CCSR_RXFLOWOFF 0x20
-#define CCSR_TXENABLED 0x08
-#define CCSR_TXFLOWON 0x04
-#define CCSR_TXFLOWOFF 0x02
-
-/*****************************************************************************/
-
-/*
- * Define the embedded commands.
- */
-#define ETC_CMD 0x00
-#define ETC_STARTBREAK 0x81
-#define ETC_DELAY 0x82
-#define ETC_STOPBREAK 0x83
-
-/*****************************************************************************/
-#endif
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * cdk.h -- CDK interface definitions.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CDK_H
-#define _CDK_H
-/*****************************************************************************/
-
-#pragma pack(2)
-
-/*
- * The following set of definitions is used to communicate with the
- * shared memory interface of the Stallion intelligent multiport serial
- * boards. The definitions in this file are taken directly from the
- * document titled "Generic Stackable Interface, Downloader and
- * Communications Development Kit".
- */
-
-/*
- * Define the set of important shared memory addresses. These are
- * required to initialize the board and get things started. All of these
- * addresses are relative to the start of the shared memory.
- */
-#define CDK_SIGADDR 0x200
-#define CDK_FEATADDR 0x280
-#define CDK_CDKADDR 0x300
-#define CDK_RDYADDR 0x262
-
-#define CDK_ALIVEMARKER 13
-
-/*
- * On hardware power up the ROMs located on the EasyConnection 8/64 will
- * fill out the following signature information into shared memory. This
- * way the host system can quickly determine that the board is present
- * and is operational.
- */
-typedef struct cdkecpsig {
- unsigned long magic;
- unsigned short romver;
- unsigned short cputype;
- unsigned char panelid[8];
-} cdkecpsig_t;
-
-#define ECP_MAGIC 0x21504345
-
-/*
- * On hardware power up the ROMs located on the ONboard, Stallion and
- * Brumbys will fill out the following signature information into shared
- * memory. This way the host system can quickly determine that the board
- * is present and is operational.
- */
-typedef struct cdkonbsig {
- unsigned short magic0;
- unsigned short magic1;
- unsigned short magic2;
- unsigned short magic3;
- unsigned short romver;
- unsigned short memoff;
- unsigned short memseg;
- unsigned short amask0;
- unsigned short pic;
- unsigned short status;
- unsigned short btype;
- unsigned short clkticks;
- unsigned short clkspeed;
- unsigned short amask1;
- unsigned short amask2;
-} cdkonbsig_t;
-
-#define ONB_MAGIC0 0xf2a7
-#define ONB_MAGIC1 0xa149
-#define ONB_MAGIC2 0x6352
-#define ONB_MAGIC3 0xf121
-
-/*
- * Define the feature area structure. The feature area is the set of
- * startup parameters used by the slave image when it starts executing.
- * They allow for the specification of buffer sizes, debug trace, etc.
- */
-typedef struct cdkfeature {
- unsigned long debug;
- unsigned long banner;
- unsigned long etype;
- unsigned long nrdevs;
- unsigned long brdspec;
- unsigned long txrqsize;
- unsigned long rxrqsize;
- unsigned long flags;
-} cdkfeature_t;
-
-#define ETYP_DDK 0
-#define ETYP_CDK 1
-
-/*
- * Define the CDK header structure. This is the info that the slave
- * environment sets up after it has been downloaded and started. It
- * essentially provides a memory map for the shared memory interface.
- */
-typedef struct cdkhdr {
- unsigned short command;
- unsigned short status;
- unsigned short port;
- unsigned short mode;
- unsigned long cmd_buf[14];
- unsigned short alive_cnt;
- unsigned short intrpt_mode;
- unsigned char intrpt_id[8];
- unsigned char ver_release;
- unsigned char ver_modification;
- unsigned char ver_fix;
- unsigned char deadman_restart;
- unsigned short deadman;
- unsigned short nrdevs;
- unsigned long memp;
- unsigned long hostp;
- unsigned long slavep;
- unsigned char hostreq;
- unsigned char slavereq;
- unsigned char cmd_reserved[30];
-} cdkhdr_t;
-
-#define MODE_DDK 0
-#define MODE_CDK 1
-
-#define IMD_INTR 0x0
-#define IMD_PPINTR 0x1
-#define IMD_POLL 0xff
-
-/*
- * Define the memory mapping structure. This structure is pointed to by
- * the memp field in the stlcdkhdr struct. As many as these structures
- * as required are laid out in shared memory to define how the rest of
- * shared memory is divided up. There will be one for each port.
- */
-typedef struct cdkmem {
- unsigned short dtype;
- unsigned long offset;
-} cdkmem_t;
-
-#define TYP_UNDEFINED 0x0
-#define TYP_ASYNCTRL 0x1
-#define TYP_ASYNC 0x20
-#define TYP_PARALLEL 0x40
-#define TYP_SYNCX21 0x60
-
-/*****************************************************************************/
-
-/*
- * Following is a set of defines and structures used to actually deal
- * with the serial ports on the board. Firstly is the set of commands
- * that can be applied to ports.
- */
-#define ASYCMD (((unsigned long) 'a') << 8)
-
-#define A_NULL (ASYCMD | 0)
-#define A_FLUSH (ASYCMD | 1)
-#define A_BREAK (ASYCMD | 2)
-#define A_GETPORT (ASYCMD | 3)
-#define A_SETPORT (ASYCMD | 4)
-#define A_SETPORTF (ASYCMD | 5)
-#define A_SETPORTFTX (ASYCMD | 6)
-#define A_SETPORTFRX (ASYCMD | 7)
-#define A_GETSIGNALS (ASYCMD | 8)
-#define A_SETSIGNALS (ASYCMD | 9)
-#define A_SETSIGNALSF (ASYCMD | 10)
-#define A_SETSIGNALSFTX (ASYCMD | 11)
-#define A_SETSIGNALSFRX (ASYCMD | 12)
-#define A_GETNOTIFY (ASYCMD | 13)
-#define A_SETNOTIFY (ASYCMD | 14)
-#define A_NOTIFY (ASYCMD | 15)
-#define A_PORTCTRL (ASYCMD | 16)
-#define A_GETSTATS (ASYCMD | 17)
-#define A_RQSTATE (ASYCMD | 18)
-#define A_FLOWSTATE (ASYCMD | 19)
-#define A_CLEARSTATS (ASYCMD | 20)
-
-/*
- * Define those arguments used for simple commands.
- */
-#define FLUSHRX 0x1
-#define FLUSHTX 0x2
-
-#define BREAKON -1
-#define BREAKOFF -2
-
-/*
- * Define the port setting structure, and all those defines that go along
- * with it. Basically this structure defines the characteristics of this
- * port: baud rate, chars, parity, input/output char cooking etc.
- */
-typedef struct asyport {
- unsigned long baudout;
- unsigned long baudin;
- unsigned long iflag;
- unsigned long oflag;
- unsigned long lflag;
- unsigned long pflag;
- unsigned long flow;
- unsigned long spare1;
- unsigned short vtime;
- unsigned short vmin;
- unsigned short txlo;
- unsigned short txhi;
- unsigned short rxlo;
- unsigned short rxhi;
- unsigned short rxhog;
- unsigned short spare2;
- unsigned char csize;
- unsigned char stopbs;
- unsigned char parity;
- unsigned char stopin;
- unsigned char startin;
- unsigned char stopout;
- unsigned char startout;
- unsigned char parmark;
- unsigned char brkmark;
- unsigned char cc[11];
-} asyport_t;
-
-#define PT_STOP1 0x0
-#define PT_STOP15 0x1
-#define PT_STOP2 0x2
-
-#define PT_NOPARITY 0x0
-#define PT_ODDPARITY 0x1
-#define PT_EVENPARITY 0x2
-#define PT_MARKPARITY 0x3
-#define PT_SPACEPARITY 0x4
-
-#define F_NONE 0x0
-#define F_IXON 0x1
-#define F_IXOFF 0x2
-#define F_IXANY 0x4
-#define F_IOXANY 0x8
-#define F_RTSFLOW 0x10
-#define F_CTSFLOW 0x20
-#define F_DTRFLOW 0x40
-#define F_DCDFLOW 0x80
-#define F_DSROFLOW 0x100
-#define F_DSRIFLOW 0x200
-
-#define FI_NORX 0x1
-#define FI_RAW 0x2
-#define FI_ISTRIP 0x4
-#define FI_UCLC 0x8
-#define FI_INLCR 0x10
-#define FI_ICRNL 0x20
-#define FI_IGNCR 0x40
-#define FI_IGNBREAK 0x80
-#define FI_DSCRDBREAK 0x100
-#define FI_1MARKBREAK 0x200
-#define FI_2MARKBREAK 0x400
-#define FI_XCHNGBREAK 0x800
-#define FI_IGNRXERRS 0x1000
-#define FI_DSCDRXERRS 0x2000
-#define FI_1MARKRXERRS 0x4000
-#define FI_2MARKRXERRS 0x8000
-#define FI_XCHNGRXERRS 0x10000
-#define FI_DSCRDNULL 0x20000
-
-#define FO_OLCUC 0x1
-#define FO_ONLCR 0x2
-#define FO_OOCRNL 0x4
-#define FO_ONOCR 0x8
-#define FO_ONLRET 0x10
-#define FO_ONL 0x20
-#define FO_OBS 0x40
-#define FO_OVT 0x80
-#define FO_OFF 0x100
-#define FO_OTAB1 0x200
-#define FO_OTAB2 0x400
-#define FO_OTAB3 0x800
-#define FO_OCR1 0x1000
-#define FO_OCR2 0x2000
-#define FO_OCR3 0x4000
-#define FO_OFILL 0x8000
-#define FO_ODELL 0x10000
-
-#define P_RTSLOCK 0x1
-#define P_CTSLOCK 0x2
-#define P_MAPRTS 0x4
-#define P_MAPCTS 0x8
-#define P_LOOPBACK 0x10
-#define P_DTRFOLLOW 0x20
-#define P_FAKEDCD 0x40
-
-#define P_RXIMIN 0x10000
-#define P_RXITIME 0x20000
-#define P_RXTHOLD 0x40000
-
-/*
- * Define a structure to communicate serial port signal and data state
- * information.
- */
-typedef struct asysigs {
- unsigned long data;
- unsigned long signal;
- unsigned long sigvalue;
-} asysigs_t;
-
-#define DT_TXBUSY 0x1
-#define DT_TXEMPTY 0x2
-#define DT_TXLOW 0x4
-#define DT_TXHIGH 0x8
-#define DT_TXFULL 0x10
-#define DT_TXHOG 0x20
-#define DT_TXFLOWED 0x40
-#define DT_TXBREAK 0x80
-
-#define DT_RXBUSY 0x100
-#define DT_RXEMPTY 0x200
-#define DT_RXLOW 0x400
-#define DT_RXHIGH 0x800
-#define DT_RXFULL 0x1000
-#define DT_RXHOG 0x2000
-#define DT_RXFLOWED 0x4000
-#define DT_RXBREAK 0x8000
-
-#define SG_DTR 0x1
-#define SG_DCD 0x2
-#define SG_RTS 0x4
-#define SG_CTS 0x8
-#define SG_DSR 0x10
-#define SG_RI 0x20
-
-/*
- * Define the notification setting structure. This is used to tell the
- * port what events we want to be informed about. Fields here use the
- * same defines as for the asysigs structure above.
- */
-typedef struct asynotify {
- unsigned long ctrl;
- unsigned long data;
- unsigned long signal;
- unsigned long sigvalue;
-} asynotify_t;
-
-/*
- * Define the port control structure. It is used to do fine grain
- * control operations on the port.
- */
-typedef struct {
- unsigned long rxctrl;
- unsigned long txctrl;
- char rximdch;
- char tximdch;
- char spare1;
- char spare2;
-} asyctrl_t;
-
-#define CT_ENABLE 0x1
-#define CT_DISABLE 0x2
-#define CT_STOP 0x4
-#define CT_START 0x8
-#define CT_STARTFLOW 0x10
-#define CT_STOPFLOW 0x20
-#define CT_SENDCHR 0x40
-
-/*
- * Define the stats structure kept for each port. This is a useful set
- * of data collected for each port on the slave. The A_GETSTATS command
- * is used to retrieve this data from the slave.
- */
-typedef struct asystats {
- unsigned long opens;
- unsigned long txchars;
- unsigned long rxchars;
- unsigned long txringq;
- unsigned long rxringq;
- unsigned long txmsgs;
- unsigned long rxmsgs;
- unsigned long txflushes;
- unsigned long rxflushes;
- unsigned long overruns;
- unsigned long framing;
- unsigned long parity;
- unsigned long ringover;
- unsigned long lost;
- unsigned long rxstart;
- unsigned long rxstop;
- unsigned long txstart;
- unsigned long txstop;
- unsigned long dcdcnt;
- unsigned long dtrcnt;
- unsigned long ctscnt;
- unsigned long rtscnt;
- unsigned long dsrcnt;
- unsigned long ricnt;
- unsigned long txbreaks;
- unsigned long rxbreaks;
- unsigned long signals;
- unsigned long state;
- unsigned long hwid;
-} asystats_t;
-
-/*****************************************************************************/
-
-/*
- * All command and control communication with a device on the slave is
- * via a control block in shared memory. Each device has its own control
- * block, defined by the following structure. The control block allows
- * the host to open, close and control the device on the slave.
- */
-typedef struct cdkctrl {
- unsigned char open;
- unsigned char close;
- unsigned long openarg;
- unsigned long closearg;
- unsigned long cmd;
- unsigned long status;
- unsigned long args[32];
-} cdkctrl_t;
-
-/*
- * Each device on the slave passes data to and from the host via a ring
- * queue in shared memory. Define a ring queue structure to hold the
- * vital information about each ring queue. Two ring queues will be
- * allocated for each port, one for receive data and one for transmit
- * data.
- */
-typedef struct cdkasyrq {
- unsigned long offset;
- unsigned short size;
- unsigned short head;
- unsigned short tail;
-} cdkasyrq_t;
-
-/*
- * Each asynchronous port is defined in shared memory by the following
- * structure. It contains a control block to command a device, and also
- * the necessary data channel information as well.
- */
-typedef struct cdkasy {
- cdkctrl_t ctrl;
- unsigned short notify;
- asynotify_t changed;
- unsigned short receive;
- cdkasyrq_t rxq;
- unsigned short transmit;
- cdkasyrq_t txq;
-} cdkasy_t;
-
-#pragma pack()
-
-/*****************************************************************************/
-
-/*
- * Define the set of ioctls used by the driver to do special things
- * to the board. These include interrupting it, and initializing
- * the driver after board startup and shutdown.
- */
-#include <linux/ioctl.h>
-
-#define STL_BINTR _IO('s',20)
-#define STL_BSTART _IO('s',21)
-#define STL_BSTOP _IO('s',22)
-#define STL_BRESET _IO('s',23)
-
-/*
- * Define a set of ioctl extensions, used to get at special stuff.
- */
-#define STL_GETPFLAG _IO('s',80)
-#define STL_SETPFLAG _IO('s',81)
-
-/*****************************************************************************/
-#endif
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
struct clk_hw;
void of_clk_del_provider(struct device_node *np);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
void *data);
+struct clk_onecell_data {
+ struct clk **clks;
+ unsigned int clk_num;
+};
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
const char *of_clk_get_parent_name(struct device_node *np, int index);
void of_clk_init(const struct of_device_id *matches);
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_CLK_BCM2835_H_
+#define __LINUX_CLK_BCM2835_H_
+
+void __init bcm2835_init_clocks(void);
+
+#endif
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * comstats.h -- Serial Port Stats.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _COMSTATS_H
-#define _COMSTATS_H
-/*****************************************************************************/
-
-/*
- * Serial port stats structure. The structure itself is UART
- * independent, but some fields may be UART/driver specific (for
- * example state).
- */
-
-typedef struct {
- unsigned long brd;
- unsigned long panel;
- unsigned long port;
- unsigned long hwid;
- unsigned long type;
- unsigned long txtotal;
- unsigned long rxtotal;
- unsigned long txbuffered;
- unsigned long rxbuffered;
- unsigned long rxoverrun;
- unsigned long rxparity;
- unsigned long rxframing;
- unsigned long rxlost;
- unsigned long txbreaks;
- unsigned long rxbreaks;
- unsigned long txxon;
- unsigned long txxoff;
- unsigned long rxxon;
- unsigned long rxxoff;
- unsigned long txctson;
- unsigned long txctsoff;
- unsigned long rxrtson;
- unsigned long rxrtsoff;
- unsigned long modem;
- unsigned long state;
- unsigned long flags;
- unsigned long ttystate;
- unsigned long cflags;
- unsigned long iflags;
- unsigned long oflags;
- unsigned long lflags;
- unsigned long signals;
-} comstats_t;
-
-
-/*
- * Board stats structure. Returns useful info about the board.
- */
-
-#define COM_MAXPANELS 8
-
-typedef struct {
- unsigned long panel;
- unsigned long type;
- unsigned long hwid;
- unsigned long nrports;
-} companel_t;
-
-typedef struct {
- unsigned long brd;
- unsigned long type;
- unsigned long hwid;
- unsigned long state;
- unsigned long ioaddr;
- unsigned long ioaddr2;
- unsigned long memaddr;
- unsigned long irq;
- unsigned long nrpanels;
- unsigned long nrports;
- companel_t panels[COM_MAXPANELS];
-} combrd_t;
-
-
-/*
- * Define the ioctl operations for stats stuff.
- */
-#include <linux/ioctl.h>
-
-#define COM_GETPORTSTATS _IO('c',30)
-#define COM_CLRPORTSTATS _IO('c',31)
-#define COM_GETBRDSTATS _IO('c',32)
-
-
-/*
- * Define the set of ioctls that give user level access to the
- * private port, panel and board structures. The argument required
- * will be driver dependent!
- */
-#define COM_READPORT _IO('c',40)
-#define COM_READBOARD _IO('c',41)
-#define COM_READPANEL _IO('c',42)
-
-/*****************************************************************************/
-#endif
+++ /dev/null
-/*
- * generic_serial.h
- *
- * Copyright (C) 1998 R.E.Wolff@BitWizard.nl
- *
- * written for the SX serial driver.
- *
- * Version 0.1 -- December, 1998.
- */
-
-#ifndef GENERIC_SERIAL_H
-#define GENERIC_SERIAL_H
-
-#warning Use of this header is deprecated.
-#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
-
-/* Flags */
-/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
- used in serial.c, but they are also used in all other serial drivers.
- Make sure they don't clash with these here... */
-#define GS_TX_INTEN 0x00800000
-#define GS_RX_INTEN 0x00400000
-#define GS_ACTIVE 0x00200000
-
-#define GS_TYPE_NORMAL 1
-
-#define GS_DEBUG_FLUSH 0x00000001
-#define GS_DEBUG_BTR 0x00000002
-#define GS_DEBUG_TERMIOS 0x00000004
-#define GS_DEBUG_STUFF 0x00000008
-#define GS_DEBUG_CLOSE 0x00000010
-#define GS_DEBUG_FLOW 0x00000020
-#define GS_DEBUG_WRITE 0x00000040
-
-#endif
struct timer_list timer; /* Timeout */
u8 * buf; /* Data buffer */
int len; /* Length of data buffer */
+ int order; /* RX Bytes to order via TX */
};
struct i2c_pnx_algo_data {
/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
struct twl4030_gpio_platform_data {
- int gpio_base;
- unsigned irq_base, irq_end;
-
/* package the two LED signals as output-only GPIOs? */
bool use_leds;
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_IRQCHIP_BCM2835_H_
+#define __LINUX_IRQCHIP_BCM2835_H_
+
+#include <asm/exception.h>
+
+extern void bcm2835_init_irq(void);
+
+extern asmlinkage void __exception_irq_entry bcm2835_handle_irq(
+ struct pt_regs *regs);
+
+#endif
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * istallion.h -- stallion intelligent multiport serial driver.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _ISTALLION_H
-#define _ISTALLION_H
-/*****************************************************************************/
-
-/*
- * Define important driver constants here.
- */
-#define STL_MAXBRDS 4
-#define STL_MAXPANELS 4
-#define STL_MAXPORTS 64
-#define STL_MAXCHANS (STL_MAXPORTS + 1)
-#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- * Define a set of structures to hold all the board/panel/port info
- * for our ports. These will be dynamically allocated as required at
- * driver initialization time.
- */
-
-/*
- * Port and board structures to hold status info about each object.
- * The board structure contains pointers to structures for each port
- * connected to it. Panels are not distinguished here, since
- * communication with the slave board will always be on a per port
- * basis.
- */
-struct stliport {
- unsigned long magic;
- struct tty_port port;
- unsigned int portnr;
- unsigned int panelnr;
- unsigned int brdnr;
- unsigned long state;
- unsigned int devnr;
- int baud_base;
- int custom_divisor;
- int closing_wait;
- int rc;
- int argsize;
- void *argp;
- unsigned int rxmarkmsk;
- wait_queue_head_t raw_wait;
- struct asysigs asig;
- unsigned long addr;
- unsigned long rxoffset;
- unsigned long txoffset;
- unsigned long sigs;
- unsigned long pflag;
- unsigned int rxsize;
- unsigned int txsize;
- unsigned char reqbit;
- unsigned char portidx;
- unsigned char portbit;
-};
-
-/*
- * Use a structure of function pointers to do board level operations.
- * These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
- unsigned long magic;
- unsigned int brdnr;
- unsigned int brdtype;
- unsigned long state;
- unsigned int nrpanels;
- unsigned int nrports;
- unsigned int nrdevs;
- unsigned int iobase;
- int iosize;
- unsigned long memaddr;
- void __iomem *membase;
- unsigned long memsize;
- int pagesize;
- int hostoffset;
- int slaveoffset;
- int bitsize;
- int enabval;
- unsigned int panels[STL_MAXPANELS];
- int panelids[STL_MAXPANELS];
- void (*init)(struct stlibrd *brdp);
- void (*enable)(struct stlibrd *brdp);
- void (*reenable)(struct stlibrd *brdp);
- void (*disable)(struct stlibrd *brdp);
- void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
- void (*intr)(struct stlibrd *brdp);
- void (*reset)(struct stlibrd *brdp);
- struct stliport *ports[STL_MAXPORTS];
-};
-
-
-/*
- * Define MAGIC numbers used for above structures.
- */
-#define STLI_PORTMAGIC 0xe671c7a1
-#define STLI_BOARDMAGIC 0x4bc6c825
-
-/*****************************************************************************/
-#endif
extern int kbd_init(void);
-extern unsigned char getledstate(void);
extern void setledstate(struct kbd_struct *kbd, unsigned int led);
extern int do_poke_blanked_console;
extern unsigned int keymap_count;
-/* console.c */
-
-static inline void con_schedule_flip(struct tty_struct *t)
-{
- unsigned long flags;
- spin_lock_irqsave(&t->buf.lock, flags);
- if (t->buf.tail != NULL)
- t->buf.tail->commit = t->buf.tail->used;
- spin_unlock_irqrestore(&t->buf.lock, flags);
- schedule_work(&t->buf.work);
-}
-
#endif
static inline __printf(2, 3)
int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
+{ return -ENOMEM; }
static inline int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type)
unsigned short);
extern int mISDN_freedchannel(struct dchannel *);
extern void mISDN_clear_bchannel(struct bchannel *);
-extern int mISDN_freebchannel(struct bchannel *);
+extern void mISDN_freebchannel(struct bchannel *);
extern int mISDN_ctrl_bchannel(struct bchannel *, struct mISDN_ctrl_req *);
extern void queue_ch_frame(struct mISDNchannel *, u_int,
int, struct sk_buff *);
#include <linux/platform_device.h>
+struct irq_domain;
+
/*
* This struct describes the MFD part ("cell").
* After registration the copy of this structure will become the platform data
extern int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base);
+ int irq_base, struct irq_domain *irq_domain);
extern void mfd_remove_devices(struct device *parent);
PRCMU_TIMCLK,
PRCMU_PLLSOC0,
PRCMU_PLLSOC1,
+ PRCMU_ARMSS,
PRCMU_PLLDDR,
PRCMU_PLLDSI,
PRCMU_DSI0CLK,
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+/* TPS chip id list */
+#define TPS65217 0xF0
+
/* I2C ID for TPS65217 part */
#define TPS65217_I2C_ID 0x24
struct tps65217 {
struct device *dev;
struct tps65217_board *pdata;
+ unsigned int id;
struct regulator_desc desc[TPS65217_NUM_REGULATOR];
struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
struct tps_info *info[TPS65217_NUM_REGULATOR];
struct regmap *regmap;
-
- /* Client devices */
- struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
};
static inline struct tps65217 *dev_to_tps65217(struct device *dev)
return dev_get_drvdata(dev);
}
+static inline int tps65217_chip_id(struct tps65217 *tps65217)
+{
+ return tps65217->id;
+}
+
int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
unsigned int *val);
int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
#define TPS6586X_SLEW_RATE_MASK 0x07
enum {
+ TPS6586X_ID_SYS,
TPS6586X_ID_SM_0,
TPS6586X_ID_SM_1,
TPS6586X_ID_SM_2,
struct twl6040_platform_data {
int audpwron_gpio; /* audio power-on gpio */
- unsigned int irq_base;
struct twl6040_codec_data *codec;
struct twl6040_vibra_data *vibra;
MLX4_NET_TRANS_RULE_NUM, /* should be last */
};
+extern const u16 __sw_id_hw[];
+
+static inline int map_hw_to_sw_id(u16 header_id)
+{
+
+ int i;
+ for (i = 0; i < MLX4_NET_TRANS_RULE_NUM; i++) {
+ if (header_id == __sw_id_hw[i])
+ return i;
+ }
+ return -EINVAL;
+}
+
enum mlx4_net_trans_promisc_mode {
MLX4_FS_PROMISC_NONE = 0,
MLX4_FS_PROMISC_UPLINK,
return NFS_SERVER(inode)->nfs_client->rpc_ops;
}
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
- return NFS_I(inode)->cookieverf;
-}
-
static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
{
struct nfs_server *nfss = NFS_SERVER(inode);
};
/* getxattr ACL interface flags */
-#define NFS4_ACL_LEN_REQUEST 0x0001 /* zero length getxattr buffer */
+#define NFS4_ACL_TRUNC 0x0001 /* ACL was truncated */
struct nfs_getaclres {
size_t acl_len;
size_t acl_data_offset;
#ifdef __KERNEL__
-#include <plat/board.h>
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
struct omapfb_platform_data {
struct omap_lcd_config lcd;
struct hw_perf_event hw;
struct perf_event_context *ctx;
- struct file *filp;
+ atomic_long_t refcount;
/*
* These accumulate total time (in nanoseconds) that children
extern void perf_swevent_put_recursion_context(int rctx);
extern void perf_event_enable(struct perf_event *event);
extern void perf_event_disable(struct perf_event *event);
+extern int __perf_event_disable(void *info);
extern void perf_event_task_tick(void);
#else
static inline void
static inline void perf_swevent_put_recursion_context(int rctx) { }
static inline void perf_event_enable(struct perf_event *event) { }
static inline void perf_event_disable(struct perf_event *event) { }
+static inline int __perf_event_disable(void *info) { return -1; }
static inline void perf_event_task_tick(void) { }
#endif
--- /dev/null
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+ unsigned int flags;
+#define IMX_SSI_DMA (1 << 0)
+#define IMX_SSI_USE_AC97 (1 << 1)
+#define IMX_SSI_NET (1 << 2)
+#define IMX_SSI_SYN (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE (1 << 4)
+ void (*ac97_reset) (struct snd_ac97 *ac97);
+ void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
--- /dev/null
+#ifndef __PLAT_AUDIO_H
+#define __PLAT_AUDIO_H
+
+struct kirkwood_asoc_platform_data {
+ int burst;
+};
+#endif
--- /dev/null
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+
+struct palm27x_asoc_info {
+ int jack_gpio;
+};
+
+#endif
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/audio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD 0
+#define S3C64XX_AC97_GPE 1
+extern void s3c64xx_ac97_setup_gpio(int);
+
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD 0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN (1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI (1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR (1 << 2)
+#define QUIRK_NEED_RSTCLR (1 << 3)
+ /* Quirks of the I2S controller */
+ u32 quirks;
+
+ /*
+ * Array of clock names that can be used to generate I2S signals.
+ * Also corresponds to clocks of I2SMOD[10]
+ */
+ const char **src_clk;
+ dma_addr_t idma_addr;
+};
+
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+ int (*cfg_gpio)(struct platform_device *);
+ union {
+ struct samsung_i2s i2s;
+ } type;
+};
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+ unsigned int use_mpllin:1;
+ unsigned int output_cdclk:1;
+
+ unsigned int have_mic:1;
+ unsigned int have_lout:1;
+
+ int amp_gpio;
+ int amp_gain[2];
+
+ void (*startup)(void);
+};
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+
+#define MCBSP_CONFIG_TYPE2 0x2
+#define MCBSP_CONFIG_TYPE3 0x3
+#define MCBSP_CONFIG_TYPE4 0x4
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ struct omap_mcbsp_ops *ops;
+ u16 buffer_size;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
+};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+ const char *sidetone;
+};
+
+#endif
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+ /* PXA DMA DREQ<0:2> pin */
+ uint32_t dma_dreq;
+ /* Register shift */
+ uint32_t reg_shift;
+ /* IRQ flags */
+ uint32_t irq_flags;
+};
+
+#endif /* __MACH_PATA_PXA_H__ */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+ void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
#ifndef __LINUX_ATMEL_AES_H
#define __LINUX_ATMEL_AES_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
/**
* struct aes_dma_data - DMA data for AES
--- /dev/null
+/*
+ * mx1_camera.h - i.MX1/i.MXL camera driver header file
+ *
+ * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * Based on PXA camera.h file:
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define MX1_CAMERA_DATA_HIGH 1
+#define MX1_CAMERA_PCLK_RISING 2
+#define MX1_CAMERA_VSYNC_HIGH 4
+
+extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
+
+/**
+ * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
+ * @mclk_10khz: master clock frequency in 10kHz units
+ * @flags: MX1 camera platform flags
+ */
+struct mx1_camera_pdata {
+ unsigned long mclk_10khz;
+ unsigned long flags;
+};
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
--- /dev/null
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_EXT_VSYNC (1 << 1)
+#define MX2_CAMERA_CCIR (1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH (1 << 4)
+#define MX2_CAMERA_GATED_CLOCK (1 << 5)
+#define MX2_CAMERA_INV_DATA (1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+ unsigned long flags;
+ unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
--- /dev/null
+/*
+ * mx3_camera.h - i.MX3x camera driver header file
+ *
+ * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MX3_CAMERA_H_
+#define _MX3_CAMERA_H_
+
+#include <linux/device.h>
+
+#define MX3_CAMERA_CLK_SRC 1
+#define MX3_CAMERA_EXT_VSYNC 2
+#define MX3_CAMERA_DP 4
+#define MX3_CAMERA_PCP 8
+#define MX3_CAMERA_HSP 0x10
+#define MX3_CAMERA_VSP 0x20
+#define MX3_CAMERA_DATAWIDTH_4 0x40
+#define MX3_CAMERA_DATAWIDTH_8 0x80
+#define MX3_CAMERA_DATAWIDTH_10 0x100
+#define MX3_CAMERA_DATAWIDTH_15 0x200
+
+#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
+ MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
+
+/**
+ * struct mx3_camera_pdata - i.MX3x camera platform data
+ * @flags: MX3_CAMERA_* flags
+ * @mclk_10khz: master clock frequency in 10kHz units
+ * @dma_dev: IPU DMA device to match against in channel allocation
+ */
+struct mx3_camera_pdata {
+ unsigned long flags;
+ unsigned long mclk_10khz;
+ struct device *dma_dev;
+};
+
+#endif
--- /dev/null
+/*
+ camera.h - PXA camera driver header file
+
+ Copyright (C) 2003, Intel Corporation
+ Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER 1
+#define PXA_CAMERA_DATAWIDTH_4 2
+#define PXA_CAMERA_DATAWIDTH_5 4
+#define PXA_CAMERA_DATAWIDTH_8 8
+#define PXA_CAMERA_DATAWIDTH_9 0x10
+#define PXA_CAMERA_DATAWIDTH_10 0x20
+#define PXA_CAMERA_PCLK_EN 0x40
+#define PXA_CAMERA_MCLK_EN 0x80
+#define PXA_CAMERA_PCP 0x100
+#define PXA_CAMERA_HSP 0x200
+#define PXA_CAMERA_VSP 0x400
+
+struct pxacamera_platform_data {
+ unsigned long flags;
+ unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
--- /dev/null
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
--- /dev/null
+/*
+ * Clock definitions for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __CLK_UX500_H
+#define __CLK_UX500_H
+
+void u8500_clk_init(void);
+void u9540_clk_init(void);
+void u8540_clk_init(void);
+
+#endif /* __CLK_UX500_H */
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _CRYPTO_UX500_H
+#define _CRYPTO_UX500_H
+#include <linux/dmaengine.h>
+#include <plat/ste_dma40.h>
+
+struct hash_platform_data {
+ void *mem_to_engine;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+struct cryp_platform_data {
+ struct stedma40_chan_cfg mem_to_engine;
+ struct stedma40_chan_cfg engine_to_mem;
+};
+
+#endif
--- /dev/null
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+ unsigned int nr_channels;
+ dma_cap_mask_t cap_mask;
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @cfg: Platform-specific initializer for the CFG register
+ */
+struct at_dma_slave {
+ struct device *dma_dev;
+ u32 cfg;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
+#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
+#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
+#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
+#define ATC_SRC_H2SEL_SW (0x0 << 9)
+#define ATC_SRC_H2SEL_HW (0x1 << 9)
+#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
+#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
+#define ATC_DST_H2SEL_SW (0x0 << 13)
+#define ATC_DST_H2SEL_HW (0x1 << 13)
+#define ATC_SOD (0x1 << 16) /* Stop On Done */
+#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
+#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
+#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
+#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
+#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
+#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
+#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
+#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
+#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
+#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
+
+
+#endif /* AT_HDMAC_H */
--- /dev/null
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
+/*
+ * M2P channels.
+ *
+ * Note that these values are also directly used for setting the PPALLOC
+ * register.
+ */
+#define EP93XX_DMA_I2S1 0
+#define EP93XX_DMA_I2S2 1
+#define EP93XX_DMA_AAC1 2
+#define EP93XX_DMA_AAC2 3
+#define EP93XX_DMA_AAC3 4
+#define EP93XX_DMA_I2S3 5
+#define EP93XX_DMA_UART1 6
+#define EP93XX_DMA_UART2 7
+#define EP93XX_DMA_UART3 8
+#define EP93XX_DMA_IRDA 9
+/* M2M channels */
+#define EP93XX_DMA_SSP 10
+#define EP93XX_DMA_IDE 11
+
+/**
+ * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
+ * @port: peripheral which is requesting the channel
+ * @direction: TX/RX channel
+ * @name: optional name for the channel, this is displayed in /proc/interrupts
+ *
+ * This information is passed as private channel parameter in a filter
+ * function. Note that this is only needed for slave/cyclic channels. For
+ * memcpy channels %NULL data should be passed.
+ */
+struct ep93xx_dma_data {
+ int port;
+ enum dma_transfer_direction direction;
+ const char *name;
+};
+
+/**
+ * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
+ * @name: name of the channel, used for getting the right clock for the channel
+ * @base: mapped registers
+ * @irq: interrupt number used by this channel
+ */
+struct ep93xx_dma_chan_data {
+ const char *name;
+ void __iomem *base;
+ int irq;
+};
+
+/**
+ * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
+ * @channels: array of channels which are passed to the driver
+ * @num_channels: number of channels in the array
+ *
+ * This structure is passed to the DMA engine driver via platform data. For
+ * M2P channels, contract is that even channels are for TX and odd for RX.
+ * There is no requirement for the M2M channels.
+ */
+struct ep93xx_dma_platform_data {
+ struct ep93xx_dma_chan_data *channels;
+ size_t num_channels;
+};
+
+static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
+{
+ return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
+}
+
+/**
+ * ep93xx_dma_chan_direction - returns direction the channel can be used
+ * @chan: channel
+ *
+ * This function can be used in filter functions to find out whether the
+ * channel supports given DMA direction. Only M2P channels have such
+ * limitation, for M2M channels the direction is configurable.
+ */
+static inline enum dma_transfer_direction
+ep93xx_dma_chan_direction(struct dma_chan *chan)
+{
+ if (!ep93xx_dma_chan_is_m2p(chan))
+ return DMA_NONE;
+
+ /* even channels are for TX, odd for RX */
+ return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+}
+
+#endif /* __ASM_ARCH_DMA_H */
--- /dev/null
+#ifndef __MACH_MXC_SDMA_H__
+#define __MACH_MXC_SDMA_H__
+
+/**
+ * struct sdma_script_start_addrs - SDMA script start pointers
+ *
+ * start addresses of the different functions in the physical
+ * address space of the SDMA engine.
+ */
+struct sdma_script_start_addrs {
+ s32 ap_2_ap_addr;
+ s32 ap_2_bp_addr;
+ s32 ap_2_ap_fixed_addr;
+ s32 bp_2_ap_addr;
+ s32 loopback_on_dsp_side_addr;
+ s32 mcu_interrupt_only_addr;
+ s32 firi_2_per_addr;
+ s32 firi_2_mcu_addr;
+ s32 per_2_firi_addr;
+ s32 mcu_2_firi_addr;
+ s32 uart_2_per_addr;
+ s32 uart_2_mcu_addr;
+ s32 per_2_app_addr;
+ s32 mcu_2_app_addr;
+ s32 per_2_per_addr;
+ s32 uartsh_2_per_addr;
+ s32 uartsh_2_mcu_addr;
+ s32 per_2_shp_addr;
+ s32 mcu_2_shp_addr;
+ s32 ata_2_mcu_addr;
+ s32 mcu_2_ata_addr;
+ s32 app_2_per_addr;
+ s32 app_2_mcu_addr;
+ s32 shp_2_per_addr;
+ s32 shp_2_mcu_addr;
+ s32 mshc_2_mcu_addr;
+ s32 mcu_2_mshc_addr;
+ s32 spdif_2_mcu_addr;
+ s32 mcu_2_spdif_addr;
+ s32 asrc_2_mcu_addr;
+ s32 ext_mem_2_ipu_addr;
+ s32 descrambler_addr;
+ s32 dptc_dvfs_addr;
+ s32 utra_addr;
+ s32 ram_code_start_addr;
+};
+
+/**
+ * struct sdma_platform_data - platform specific data for SDMA engine
+ *
+ * @fw_name The firmware name
+ * @script_addrs SDMA scripts addresses in SDMA ROM
+ */
+struct sdma_platform_data {
+ char *fw_name;
+ struct sdma_script_start_addrs *script_addrs;
+};
+
+#endif /* __MACH_MXC_SDMA_H__ */
--- /dev/null
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+/*
+ * This enumerates peripheral types. Used for SDMA.
+ */
+enum sdma_peripheral_type {
+ IMX_DMATYPE_SSI, /* MCU domain SSI */
+ IMX_DMATYPE_SSI_SP, /* Shared SSI */
+ IMX_DMATYPE_MMC, /* MMC */
+ IMX_DMATYPE_SDHC, /* SDHC */
+ IMX_DMATYPE_UART, /* MCU domain UART */
+ IMX_DMATYPE_UART_SP, /* Shared UART */
+ IMX_DMATYPE_FIRI, /* FIRI */
+ IMX_DMATYPE_CSPI, /* MCU domain CSPI */
+ IMX_DMATYPE_CSPI_SP, /* Shared CSPI */
+ IMX_DMATYPE_SIM, /* SIM */
+ IMX_DMATYPE_ATA, /* ATA */
+ IMX_DMATYPE_CCM, /* CCM */
+ IMX_DMATYPE_EXT, /* External peripheral */
+ IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */
+ IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */
+ IMX_DMATYPE_DSP, /* DSP */
+ IMX_DMATYPE_MEMORY, /* Memory */
+ IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
+ IMX_DMATYPE_SPDIF, /* SPDIF */
+ IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */
+ IMX_DMATYPE_ASRC, /* ASRC */
+ IMX_DMATYPE_ESAI, /* ESAI */
+};
+
+enum imx_dma_prio {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+};
+
+struct imx_dma_data {
+ int dma_request; /* DMA request line */
+ enum sdma_peripheral_type peripheral_type;
+ int priority;
+};
+
+static inline int imx_dma_is_ipu(struct dma_chan *chan)
+{
+ return !strcmp(dev_name(chan->device->dev), "ipu-core");
+}
+
+static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
+{
+ return strstr(dev_name(chan->device->dev), "sdma") ||
+ !strcmp(dev_name(chan->device->dev), "imx-dma");
+}
+
+#endif
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ * SRAM Memory Management
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+enum sram_type {
+ MMP_SRAM_UNDEFINED = 0,
+ MMP_ASRAM,
+ MMP_ISRAM,
+};
+
+struct sram_platdata {
+ char *pool_name;
+ int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
+ * Marvell XOR platform device data definition file.
+ */
+
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
+
+#include <linux/dmaengine.h>
+#include <linux/mbus.h>
+
+#define MV_XOR_SHARED_NAME "mv_xor_shared"
+#define MV_XOR_NAME "mv_xor"
+
+struct mv_xor_platform_data {
+ struct platform_device *shared;
+ int hw_id;
+ dma_cap_mask_t cap_mask;
+ size_t pool_size;
+};
+
+
+#endif
--- /dev/null
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+ void (*dsp_set_min_opp) (u8 opp_id);
+ u8 (*dsp_get_opp) (void);
+ void (*cpu_set_freq) (unsigned long f);
+ unsigned long (*cpu_get_freq) (void);
+ unsigned long mpu_speed[6];
+
+ /* functions to write and read PRCM registers */
+ void (*dsp_prm_write)(u32, s16 , u16);
+ u32 (*dsp_prm_read)(s16 , u16);
+ u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+ void (*dsp_cm_write)(u32, s16 , u16);
+ u32 (*dsp_cm_read)(s16 , u16);
+ u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+ void (*set_bootaddr)(u32);
+ void (*set_bootmode)(u8);
+
+ phys_addr_t phys_mempool_base;
+ phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+ unsigned int xcno; /* number of xmac/xpec engine this eth uses */
+};
+
+#endif
--- /dev/null
+/*
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+
+#define OMAP1_MPUIO_BASE 0xfffb5000
+
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
+#define OMAP_MPUIO_INPUT_LATCH 0x00
+#define OMAP_MPUIO_OUTPUT 0x04
+#define OMAP_MPUIO_IO_CNTL 0x08
+#define OMAP_MPUIO_KBR_LATCH 0x10
+#define OMAP_MPUIO_KBC 0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
+#define OMAP_MPUIO_KBD_INT 0x20
+#define OMAP_MPUIO_GPIO_INT 0x24
+#define OMAP_MPUIO_KBD_MASKIT 0x28
+#define OMAP_MPUIO_GPIO_MASKIT 0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
+#define OMAP_MPUIO_LATCH 0x34
+
+#define OMAP34XX_NR_GPIOS 6
+
+/*
+ * OMAP1510 GPIO registers
+ */
+#define OMAP1510_GPIO_DATA_INPUT 0x00
+#define OMAP1510_GPIO_DATA_OUTPUT 0x04
+#define OMAP1510_GPIO_DIR_CONTROL 0x08
+#define OMAP1510_GPIO_INT_CONTROL 0x0c
+#define OMAP1510_GPIO_INT_MASK 0x10
+#define OMAP1510_GPIO_INT_STATUS 0x14
+#define OMAP1510_GPIO_PIN_CONTROL 0x18
+
+#define OMAP1510_IH_GPIO_BASE 64
+
+/*
+ * OMAP1610 specific GPIO registers
+ */
+#define OMAP1610_GPIO_REVISION 0x0000
+#define OMAP1610_GPIO_SYSCONFIG 0x0010
+#define OMAP1610_GPIO_SYSSTATUS 0x0014
+#define OMAP1610_GPIO_IRQSTATUS1 0x0018
+#define OMAP1610_GPIO_IRQENABLE1 0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
+#define OMAP1610_GPIO_DATAIN 0x002c
+#define OMAP1610_GPIO_DATAOUT 0x0030
+#define OMAP1610_GPIO_DIRECTION 0x0034
+#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
+#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
+#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
+#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
+#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
+#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
+
+/*
+ * OMAP7XX specific GPIO registers
+ */
+#define OMAP7XX_GPIO_DATA_INPUT 0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
+#define OMAP7XX_GPIO_DIR_CONTROL 0x08
+#define OMAP7XX_GPIO_INT_CONTROL 0x0c
+#define OMAP7XX_GPIO_INT_MASK 0x10
+#define OMAP7XX_GPIO_INT_STATUS 0x14
+
+/*
+ * omap2+ specific GPIO registers
+ */
+#define OMAP24XX_GPIO_REVISION 0x0000
+#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
+#define OMAP24XX_GPIO_IRQENABLE2 0x002c
+#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
+#define OMAP24XX_GPIO_CTRL 0x0030
+#define OMAP24XX_GPIO_OE 0x0034
+#define OMAP24XX_GPIO_DATAIN 0x0038
+#define OMAP24XX_GPIO_DATAOUT 0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
+#define OMAP24XX_GPIO_RISINGDETECT 0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
+#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
+#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
+#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
+#define OMAP24XX_GPIO_SETWKUENA 0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
+#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+
+#define OMAP4_GPIO_REVISION 0x0000
+#define OMAP4_GPIO_EOI 0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
+#define OMAP4_GPIO_IRQSTATUS0 0x002c
+#define OMAP4_GPIO_IRQSTATUS1 0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
+#define OMAP4_GPIO_IRQWAKEN0 0x0044
+#define OMAP4_GPIO_IRQWAKEN1 0x0048
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
+#define OMAP4_GPIO_CTRL 0x0130
+#define OMAP4_GPIO_OE 0x0134
+#define OMAP4_GPIO_DATAIN 0x0138
+#define OMAP4_GPIO_DATAOUT 0x013c
+#define OMAP4_GPIO_LEVELDETECT0 0x0140
+#define OMAP4_GPIO_LEVELDETECT1 0x0144
+#define OMAP4_GPIO_RISINGDETECT 0x0148
+#define OMAP4_GPIO_FALLINGDETECT 0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
+#define OMAP4_GPIO_SETDATAOUT 0x0194
+
+#define OMAP_MAX_GPIO_LINES 192
+
+#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
+
+struct omap_gpio_dev_attr {
+ int bank_width; /* GPIO bank width */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_reg_offs {
+ u16 revision;
+ u16 direction;
+ u16 datain;
+ u16 dataout;
+ u16 set_dataout;
+ u16 clr_dataout;
+ u16 irqstatus;
+ u16 irqstatus2;
+ u16 irqstatus_raw0;
+ u16 irqstatus_raw1;
+ u16 irqenable;
+ u16 irqenable2;
+ u16 set_irqenable;
+ u16 clr_irqenable;
+ u16 debounce;
+ u16 debounce_en;
+ u16 ctrl;
+ u16 wkup_en;
+ u16 leveldetect0;
+ u16 leveldetect1;
+ u16 risingdetect;
+ u16 fallingdetect;
+ u16 irqctrl;
+ u16 edgectrl1;
+ u16 edgectrl2;
+ u16 pinctrl;
+
+ bool irqenable_inv;
+};
+
+struct omap_gpio_platform_data {
+ int bank_type;
+ int bank_width; /* GPIO bank width */
+ int bank_stride; /* Only needed for omap1 MPUIO */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+ bool loses_context; /* whether the bank would ever lose context */
+ bool is_mpuio; /* whether the bank is of type MPUIO */
+ u32 non_wakeup_gpios;
+
+ struct omap_gpio_reg_offs *regs;
+
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
+};
+
+extern void omap2_gpio_prepare_for_idle(int off_mode);
+extern void omap2_gpio_resume_after_idle(void);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+#endif
--- /dev/null
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+ const char *name;
+ unsigned int mult;
+ unsigned int div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+ struct s3c_hwmon_chcfg *in[8];
+};
+
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
--- /dev/null
+/*
+ * DaVinci I2C controller platform_device info
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+*/
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+/* All frequencies are expressed in kHz */
+struct davinci_i2c_platform_data {
+ unsigned int bus_freq; /* standard bus frequency (kHz) */
+ unsigned int bus_delay; /* post-transaction delay (usec) */
+ unsigned int sda_pin; /* GPIO pin ID to use for SDA */
+ unsigned int scl_pin; /* GPIO pin ID to use for SCL */
+};
+
+/* for board setup code */
+void davinci_init_i2c(struct davinci_i2c_platform_data *);
+
+#endif /* __ASM_ARCH_I2C_H */
--- /dev/null
+/*
+ * i2c.h - i.MX I2C driver header file
+ *
+ * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __ASM_ARCH_I2C_H_
+#define __ASM_ARCH_I2C_H_
+
+/**
+ * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
+ * @bitrate: Bus speed measured in Hz
+ *
+ **/
+struct imxi2c_platform_data {
+ u32 bitrate;
+};
+
+#endif /* __ASM_ARCH_I2C_H_ */
--- /dev/null
+#ifndef __ASM_ARCH_NUC900_I2C_H
+#define __ASM_ARCH_NUC900_I2C_H
+
+struct nuc900_platform_i2c {
+ int bus_num;
+ unsigned long bus_freq;
+};
+
+#endif /* __ASM_ARCH_NUC900_I2C_H */
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/iic.h
+ *
+ * Copyright 2004-2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
+
+/**
+ * struct s3c2410_platform_i2c - Platform data for s3c I2C.
+ * @bus_num: The bus number to use (if possible).
+ * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
+ * @slave_addr: The I2C address for the slave device (if enabled).
+ * @frequency: The desired frequency in Hz of the bus. This is
+ * guaranteed to not be exceeded. If the caller does
+ * not care, use zero and the driver will select a
+ * useful default.
+ * @sda_delay: The delay (in ns) applied to SDA edges.
+ * @cfg_gpio: A callback to configure the pins for I2C operation.
+ */
+struct s3c2410_platform_i2c {
+ int bus_num;
+ unsigned int flags;
+ unsigned int slave_addr;
+ unsigned long frequency;
+ unsigned int sda_delay;
+
+ void (*cfg_gpio)(struct platform_device *dev);
+};
+
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c2410_platform_i2c default_i2c_data;
+
+#endif /* __ASM_ARCH_IIC_H */
--- /dev/null
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF 1
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+
+struct pxaficp_platform_data {
+ int transceiver_cap;
+ void (*transceiver_mode)(struct device *dev, int mode);
+ int (*startup)(struct device *dev);
+ void (*shutdown)(struct device *dev);
+ int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
+ bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
--- /dev/null
+#ifndef __ASM_ARCH_PXA930_ROTARY_H
+#define __ASM_ARCH_PXA930_ROTARY_H
+
+/* NOTE:
+ *
+ * rotary can be either interpreted as a ralative input event (e.g.
+ * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
+ * or LEFT/RIGHT), depending on if up_key & down_key are assigned
+ * or rel_code is assigned a non-zero value. When all are non-zero,
+ * up_key and down_key will be preferred.
+ */
+struct pxa930_rotary_platform_data {
+ int up_key;
+ int down_key;
+ int rel_code;
+};
+
+void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA930_ROTARY_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_KEYBOARD_H
+#define __PLAT_KEYBOARD_H
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/types.h>
+
+#define DECLARE_9x9_KEYMAP(_name) \
+int _name[] = { \
+ KEY(0, 0, KEY_ESC), \
+ KEY(0, 1, KEY_1), \
+ KEY(0, 2, KEY_2), \
+ KEY(0, 3, KEY_3), \
+ KEY(0, 4, KEY_4), \
+ KEY(0, 5, KEY_5), \
+ KEY(0, 6, KEY_6), \
+ KEY(0, 7, KEY_7), \
+ KEY(0, 8, KEY_8), \
+ KEY(1, 0, KEY_9), \
+ KEY(1, 1, KEY_MINUS), \
+ KEY(1, 2, KEY_EQUAL), \
+ KEY(1, 3, KEY_BACKSPACE), \
+ KEY(1, 4, KEY_TAB), \
+ KEY(1, 5, KEY_Q), \
+ KEY(1, 6, KEY_W), \
+ KEY(1, 7, KEY_E), \
+ KEY(1, 8, KEY_R), \
+ KEY(2, 0, KEY_T), \
+ KEY(2, 1, KEY_Y), \
+ KEY(2, 2, KEY_U), \
+ KEY(2, 3, KEY_I), \
+ KEY(2, 4, KEY_O), \
+ KEY(2, 5, KEY_P), \
+ KEY(2, 6, KEY_LEFTBRACE), \
+ KEY(2, 7, KEY_RIGHTBRACE), \
+ KEY(2, 8, KEY_ENTER), \
+ KEY(3, 0, KEY_LEFTCTRL), \
+ KEY(3, 1, KEY_A), \
+ KEY(3, 2, KEY_S), \
+ KEY(3, 3, KEY_D), \
+ KEY(3, 4, KEY_F), \
+ KEY(3, 5, KEY_G), \
+ KEY(3, 6, KEY_H), \
+ KEY(3, 7, KEY_J), \
+ KEY(3, 8, KEY_K), \
+ KEY(4, 0, KEY_L), \
+ KEY(4, 1, KEY_SEMICOLON), \
+ KEY(4, 2, KEY_APOSTROPHE), \
+ KEY(4, 3, KEY_GRAVE), \
+ KEY(4, 4, KEY_LEFTSHIFT), \
+ KEY(4, 5, KEY_BACKSLASH), \
+ KEY(4, 6, KEY_Z), \
+ KEY(4, 7, KEY_X), \
+ KEY(4, 8, KEY_C), \
+ KEY(5, 0, KEY_V), \
+ KEY(5, 1, KEY_B), \
+ KEY(5, 2, KEY_N), \
+ KEY(5, 3, KEY_M), \
+ KEY(5, 4, KEY_COMMA), \
+ KEY(5, 5, KEY_DOT), \
+ KEY(5, 6, KEY_SLASH), \
+ KEY(5, 7, KEY_RIGHTSHIFT), \
+ KEY(5, 8, KEY_KPASTERISK), \
+ KEY(6, 0, KEY_LEFTALT), \
+ KEY(6, 1, KEY_SPACE), \
+ KEY(6, 2, KEY_CAPSLOCK), \
+ KEY(6, 3, KEY_F1), \
+ KEY(6, 4, KEY_F2), \
+ KEY(6, 5, KEY_F3), \
+ KEY(6, 6, KEY_F4), \
+ KEY(6, 7, KEY_F5), \
+ KEY(6, 8, KEY_F6), \
+ KEY(7, 0, KEY_F7), \
+ KEY(7, 1, KEY_F8), \
+ KEY(7, 2, KEY_F9), \
+ KEY(7, 3, KEY_F10), \
+ KEY(7, 4, KEY_NUMLOCK), \
+ KEY(7, 5, KEY_SCROLLLOCK), \
+ KEY(7, 6, KEY_KP7), \
+ KEY(7, 7, KEY_KP8), \
+ KEY(7, 8, KEY_KP9), \
+ KEY(8, 0, KEY_KPMINUS), \
+ KEY(8, 1, KEY_KP4), \
+ KEY(8, 2, KEY_KP5), \
+ KEY(8, 3, KEY_KP6), \
+ KEY(8, 4, KEY_KPPLUS), \
+ KEY(8, 5, KEY_KP1), \
+ KEY(8, 6, KEY_KP2), \
+ KEY(8, 7, KEY_KP3), \
+ KEY(8, 8, KEY_KP0), \
+}
+
+#define DECLARE_6x6_KEYMAP(_name) \
+int _name[] = { \
+ KEY(0, 0, KEY_RESERVED), \
+ KEY(0, 1, KEY_1), \
+ KEY(0, 2, KEY_2), \
+ KEY(0, 3, KEY_3), \
+ KEY(0, 4, KEY_4), \
+ KEY(0, 5, KEY_5), \
+ KEY(1, 0, KEY_Q), \
+ KEY(1, 1, KEY_W), \
+ KEY(1, 2, KEY_E), \
+ KEY(1, 3, KEY_R), \
+ KEY(1, 4, KEY_T), \
+ KEY(1, 5, KEY_Y), \
+ KEY(2, 0, KEY_D), \
+ KEY(2, 1, KEY_F), \
+ KEY(2, 2, KEY_G), \
+ KEY(2, 3, KEY_H), \
+ KEY(2, 4, KEY_J), \
+ KEY(2, 5, KEY_K), \
+ KEY(3, 0, KEY_B), \
+ KEY(3, 1, KEY_N), \
+ KEY(3, 2, KEY_M), \
+ KEY(3, 3, KEY_COMMA), \
+ KEY(3, 4, KEY_DOT), \
+ KEY(3, 5, KEY_SLASH), \
+ KEY(4, 0, KEY_F6), \
+ KEY(4, 1, KEY_F7), \
+ KEY(4, 2, KEY_F8), \
+ KEY(4, 3, KEY_F9), \
+ KEY(4, 4, KEY_F10), \
+ KEY(4, 5, KEY_NUMLOCK), \
+ KEY(5, 0, KEY_KP2), \
+ KEY(5, 1, KEY_KP3), \
+ KEY(5, 2, KEY_KP0), \
+ KEY(5, 3, KEY_KPDOT), \
+ KEY(5, 4, KEY_RO), \
+ KEY(5, 5, KEY_ZENKAKUHANKAKU), \
+}
+
+#define KEYPAD_9x9 0
+#define KEYPAD_6x6 1
+#define KEYPAD_2x2 2
+
+/**
+ * struct kbd_platform_data - spear keyboard platform data
+ * keymap: pointer to keymap data (table and size)
+ * rep: enables key autorepeat
+ * mode: choose keyboard support(9x9, 6x6, 2x2)
+ * suspended_rate: rate at which keyboard would operate in suspended mode
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement keyboards.
+ */
+struct kbd_platform_data {
+ const struct matrix_keymap_data *keymap;
+ bool rep;
+ unsigned int mode;
+ unsigned int suspended_rate;
+};
+
+#endif /* __PLAT_KEYBOARD_H */
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
+#define __ASM_ARCH_EP93XX_KEYPAD_H
+
+struct matrix_keymap_data;
+
+/* flags for the ep93xx_keypad driver */
+#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
+#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
+#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
+#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
+#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */
+#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */
+
+/**
+ * struct ep93xx_keypad_platform_data - platform specific device structure
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @debounce: debounce start count; terminal count is 0xff
+ * @prescale: row/column counter pre-scaler load value
+ * @flags: see above
+ */
+struct ep93xx_keypad_platform_data {
+ struct matrix_keymap_data *keymap_data;
+ unsigned int debounce;
+ unsigned int prescale;
+ unsigned int flags;
+};
+
+#define EP93XX_MATRIX_ROWS (8)
+#define EP93XX_MATRIX_COLS (8)
+
+#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
+ *
+ * ux500 Scroll key and Keypad Encoder (SKE) header
+ */
+
+#ifndef __SKE_H
+#define __SKE_H
+
+#include <linux/input/matrix_keypad.h>
+
+/* register definitions for SKE peripheral */
+#define SKE_CR 0x00
+#define SKE_VAL0 0x04
+#define SKE_VAL1 0x08
+#define SKE_DBCR 0x0C
+#define SKE_IMSC 0x10
+#define SKE_RIS 0x14
+#define SKE_MIS 0x18
+#define SKE_ICR 0x1C
+
+/*
+ * Keypad module
+ */
+
+/**
+ * struct keypad_platform_data - structure for platform specific data
+ * @init: pointer to keypad init function
+ * @exit: pointer to keypad deinitialisation function
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow: maximum number of rows
+ * @kcol: maximum number of columns
+ * @debounce_ms: platform specific debounce time
+ * @no_autorepeat: flag for auto repetition
+ * @wakeup_enable: allow waking up the system
+ */
+struct ske_keypad_platform_data {
+ int (*init)(void);
+ int (*exit)(void);
+ const struct matrix_keymap_data *keymap_data;
+ u8 krow;
+ u8 kcol;
+ u8 debounce_ms;
+ bool no_autorepeat;
+ bool wakeup_enable;
+};
+#endif /*__SKE_KPD_H*/
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/keypad.h
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg) 0
+#define omap_writew(val, reg) do {} while (0)
+#endif
+#include <linux/input/matrix_keypad.h>
+
+struct omap_kp_platform_data {
+ int rows;
+ int cols;
+ const struct matrix_keymap_data *keymap_data;
+ bool rep;
+ unsigned long delay;
+ bool dbounce;
+ /* specific to OMAP242x*/
+ unsigned int *row_gpios;
+ unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT 14
+#define GROUP_0 (0 << GROUP_SHIFT)
+#define GROUP_1 (1 << GROUP_SHIFT)
+#define GROUP_2 (2 << GROUP_SHIFT)
+#define GROUP_3 (3 << GROUP_SHIFT)
+#define GROUP_MASK GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
+
+
+#endif
+
--- /dev/null
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX_MATRIX_KEY_ROWS (8)
+#define MAX_MATRIX_KEY_COLS (8)
+#define MATRIX_ROW_SHIFT (3)
+#define MAX_DIRECT_KEY_NUM (8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ * _plus_ the number of rotary-encoder sensor inputs, this can be
+ * left as 0 if only rotary encoders are enabled, the driver will
+ * automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ * encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ * default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
+ */
+struct pxa27x_keypad_platform_data {
+
+ /* code map for the matrix keys */
+ unsigned int matrix_key_rows;
+ unsigned int matrix_key_cols;
+ unsigned int *matrix_key_map;
+ int matrix_key_map_size;
+
+ /* direct keys */
+ int direct_key_num;
+ unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
+ /* the key output may be low active */
+ int direct_key_low_active;
+ /* give board a chance to choose the start direct key */
+ unsigned int direct_key_mask;
+
+ /* rotary encoders 0 */
+ int enable_rotary0;
+ int rotary0_rel_code;
+ int rotary0_up_key;
+ int rotary0_down_key;
+
+ /* rotary encoders 1 */
+ int enable_rotary1;
+ int rotary1_rel_code;
+ int rotary1_up_key;
+ int rotary1_down_key;
+
+ /* key debounce interval */
+ unsigned int debounce_interval;
+
+ /* clear wakeup event requirement for pxa168 */
+ void (*clear_wakeup_event)(void);
+};
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
--- /dev/null
+#ifndef __ASM_ARCH_W90P910_KEYPAD_H
+#define __ASM_ARCH_W90P910_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+extern void mfp_set_groupi(struct device *dev);
+
+struct w90p910_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+
+ unsigned int prescale;
+ unsigned int debounce;
+};
+
+#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+ DAVINCI_KEYSCAN_MATRIX_4X4,
+ DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+ int (*device_enable)(struct device *dev);
+ unsigned short *keymap;
+ u32 keymapsize;
+ u8 rep:1;
+ u8 strobe;
+ u8 interval;
+ u8 matrix_type;
+};
+
+#endif
+
--- /dev/null
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+ MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+ MIPID_TEST_SUCCESS,
+ MIPID_TEST_INVALID,
+ MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+ int nreset_gpio;
+ int data_lines;
+
+ void (*shutdown)(struct mipid_platform_data *pdata);
+ void (*set_bklight_level)(struct mipid_platform_data *pdata,
+ int level);
+ int (*get_bklight_level)(struct mipid_platform_data *pdata);
+ int (*get_bklight_max)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+ unsigned *addr;
+ int num_addr;
+ unsigned *data;
+ int num_data;
+ unsigned enable;
+};
+
+enum netxbig_led_mode {
+ NETXBIG_LED_OFF,
+ NETXBIG_LED_ON,
+ NETXBIG_LED_SATA,
+ NETXBIG_LED_TIMER1,
+ NETXBIG_LED_TIMER2,
+ NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+ unsigned long delay_on;
+ unsigned long delay_off;
+ enum netxbig_led_mode mode;
+};
+
+struct netxbig_led {
+ const char *name;
+ const char *default_trigger;
+ int mode_addr;
+ int *mode_val;
+ int bright_addr;
+};
+
+struct netxbig_led_platform_data {
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timer;
+ int num_timer;
+ struct netxbig_led *leds;
+ int num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+ *
+ * Platform data structure for Network Space v2 LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NS2_H
+#define __MACH_LEDS_NS2_H
+
+struct ns2_led {
+ const char *name;
+ const char *default_trigger;
+ unsigned cmd;
+ unsigned slow;
+};
+
+struct ns2_led_platform_data {
+ int num_leds;
+ struct ns2_led *leds;
+};
+
+#endif /* __MACH_LEDS_NS2_H */
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+ unsigned int gpio;
+ unsigned int flags;
+
+ char *name;
+ char *def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
--- /dev/null
+/*
+ * Maxim (Dallas) MAX3107/8 serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ * Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ * Based on max3107.c, by Aavamobile
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _MAX310X_H_
+#define _MAX310X_H_
+
+/*
+ * Example board initialization data:
+ *
+ * static struct max310x_pdata max3107_pdata = {
+ * .driver_flags = MAX310X_EXT_CLK,
+ * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
+ * .frequency = 3686400,
+ * .gpio_base = -1,
+ * };
+ *
+ * static struct spi_board_info spi_device_max3107[] = {
+ * {
+ * .modalias = "max3107",
+ * .irq = IRQ_EINT3,
+ * .bus_num = 1,
+ * .chip_select = 1,
+ * .platform_data = &max3107_pdata,
+ * },
+ * };
+ */
+
+#define MAX310X_MAX_UARTS 1
+
+/* MAX310X platform data structure */
+struct max310x_pdata {
+ /* Flags global to driver */
+ const u8 driver_flags:2;
+#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */
+#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */
+ /* Flags global to UART port */
+ const u8 uart_flags[MAX310X_MAX_UARTS];
+#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */
+#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */
+#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction
+ * control (RS-485)
+ */
+ /* Frequency (extrenal clock or crystal) */
+ const int frequency;
+ /* GPIO base number (can be negative) */
+ const int gpio_base;
+ /* Called during startup */
+ void (*init)(void);
+ /* Called before finish */
+ void (*exit)(void);
+ /* Suspend callback */
+ void (*suspend)(int do_suspend);
+};
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ * Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+ u32 mccr0;
+ u32 mccr1;
+ unsigned int sclk_rate;
+ void *codec_pdata;
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ * driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+ unsigned long clk_rate;
+ u8 lanes;
+ u8 alignment;
+ u8 hs_settle;
+ bool fixed_phy_vdd;
+ int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ * false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
--- /dev/null
+/*
+ * Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+ /* get_cd()/get_wp() may sleep */
+ int (*get_cd)(int module);
+ int (*get_ro)(int module);
+
+ void (*set_power)(int module, bool on);
+
+ /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+ u8 wires;
+
+ u32 max_freq;
+
+ /* any additional host capabilities: OR'd in to mmc->f_caps */
+ u32 caps;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+
+ /* Number of sg segments */
+ u8 nr_sg;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+ MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+ MMC_CTLR_VERSION_2, /* DA830 */
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+enum wp_types {
+ ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
+ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
+ ESDHC_WP_GPIO, /* external gpio pin for WP */
+};
+
+enum cd_types {
+ ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
+ ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
+ ESDHC_CD_GPIO, /* external gpio pin for CD */
+ ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
+};
+
+/**
+ * struct esdhc_platform_data - platform data for esdhc on i.MX
+ *
+ * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
+ *
+ * @wp_gpio: gpio for write_protect
+ * @cd_gpio: gpio for card_detect interrupt
+ * @wp_type: type of write_protect method (see wp_types enum above)
+ * @cd_type: type of card_detect method (see cd_types enum above)
+ */
+
+struct esdhc_platform_data {
+ unsigned int wp_gpio;
+ unsigned int cd_gpio;
+ enum wp_types wp_type;
+ enum cd_types cd_type;
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
--- /dev/null
+/*
+ * arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+struct msm_mmc_gpio {
+ unsigned no;
+ const char *name;
+};
+
+struct msm_mmc_gpio_data {
+ struct msm_mmc_gpio *gpio;
+ u8 size;
+};
+
+struct msm_mmc_platform_data {
+ unsigned int ocr_mask; /* available voltages */
+ u32 (*translate_vdd)(struct device *, unsigned int);
+ unsigned int (*status)(struct device *);
+ int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+ struct msm_mmc_gpio_data *gpio_data;
+ void (*init_card)(struct mmc_card *card);
+};
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+ unsigned int clock;
+ int gpio_card_detect;
+ int gpio_write_protect;
+};
+
+#endif
--- /dev/null
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+/* board specific SDHC data, optional.
+ * If not present, a writable card with 3,3V is assumed.
+ */
+struct imxmmc_platform_data {
+ /* Return values for the get_ro callback should be:
+ * 0 for a read/write card
+ * 1 for a read-only card
+ * -ENOSYS when not supported (equal to NULL callback)
+ * or a negative errno value when something bad happened
+ */
+ int (*get_ro)(struct device *);
+
+ /* board specific hook to (de)initialize the SD slot.
+ * The board code can call 'handler' on a card detection
+ * change giving data as argument.
+ */
+ int (*init)(struct device *dev, irq_handler_t handler, void *data);
+ void (*exit)(struct device *dev, void *data);
+
+ /* available voltages. If not given, assume
+ * MMC_VDD_32_33 | MMC_VDD_33_34
+ */
+ unsigned int ocr_avail;
+
+ /* adjust slot voltage */
+ void (*setpower)(struct device *, unsigned int vdd);
+
+ /* enable card detect using DAT3 */
+ int dat3_card_detect;
+};
+
+#endif
--- /dev/null
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+ unsigned int ocr_mask; /* available voltages */
+ unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
+ int (*init)(struct device *, irq_handler_t , void *);
+ int (*get_ro)(struct device *);
+ void (*setpower)(struct device *, unsigned int);
+ void (*exit)(struct device *, void *);
+ int gpio_card_detect; /* gpio detecting card insertion */
+ int gpio_card_ro; /* gpio detecting read only toggle */
+ bool gpio_card_ro_invert; /* gpio ro is inverted */
+ int gpio_power; /* gpio powering up MMC bus */
+ bool gpio_power_invert; /* gpio power is inverted */
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
--- /dev/null
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+ unsigned int no_wprotect:1;
+ unsigned int no_detect:1;
+ unsigned int wprotect_invert:1;
+ unsigned int detect_invert:1; /* set => detect active high */
+ unsigned int use_dma:1;
+
+ unsigned int gpio_detect;
+ unsigned int gpio_wprotect;
+ unsigned long ocr_avail;
+ void (*set_power)(unsigned char power_mode,
+ unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Palm, Inc.
+ * Author: Yvonne Yip <y@palm.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H
+#define __PLATFORM_DATA_TEGRA_SDHCI_H
+
+#include <linux/mmc/host.h>
+
+struct tegra_sdhci_platform_data {
+ int cd_gpio;
+ int wp_gpio;
+ int power_gpio;
+ int is_8bit;
+ int pm_flags;
+};
+
+#endif
--- /dev/null
+#ifndef __ASM_ARCH_PXA930_TRKBALL_H
+#define __ASM_ARCH_PXA930_TRKBALL_H
+
+struct pxa930_trkball_platform_data {
+ int x_filter;
+ int y_filter;
+};
+
+#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
+
--- /dev/null
+/*
+ * TI DaVinci AEMIF support
+ *
+ * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_AEMIF_H
+#define _MACH_DAVINCI_AEMIF_H
+
+#define NRCSR_OFFSET 0x00
+#define AWCCR_OFFSET 0x04
+#define A1CR_OFFSET 0x10
+
+#define ACR_ASIZE_MASK 0x3
+#define ACR_EW_MASK BIT(30)
+#define ACR_SS_MASK BIT(31)
+
+/* All timings in nanoseconds */
+struct davinci_aemif_timing {
+ u8 wsetup;
+ u8 wstrobe;
+ u8 whold;
+
+ u8 rsetup;
+ u8 rstrobe;
+ u8 rhold;
+
+ u8 ta;
+};
+
+int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+ void __iomem *base, unsigned cs);
+#endif
--- /dev/null
+/*
+ * mach-davinci/nand.h
+ *
+ * Copyright © 2006 Texas Instruments.
+ *
+ * Ported to 2.6.23 Copyright © 2008 by
+ * Sander Huijsen <Shuijsen@optelecom-nkf.com>
+ * Troy Kisky <troy.kisky@boundarydevices.com>
+ * Dirk Behme <Dirk.Behme@gmail.com>
+ *
+ * --------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_NAND_H
+#define __ARCH_ARM_DAVINCI_NAND_H
+
+#include <linux/mtd/nand.h>
+
+#define NANDFCR_OFFSET 0x60
+#define NANDFSR_OFFSET 0x64
+#define NANDF1ECC_OFFSET 0x70
+
+/* 4-bit ECC syndrome registers */
+#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc
+#define NAND_4BIT_ECC1_OFFSET 0xc0
+#define NAND_4BIT_ECC2_OFFSET 0xc4
+#define NAND_4BIT_ECC3_OFFSET 0xc8
+#define NAND_4BIT_ECC4_OFFSET 0xcc
+#define NAND_ERR_ADD1_OFFSET 0xd0
+#define NAND_ERR_ADD2_OFFSET 0xd4
+#define NAND_ERR_ERRVAL1_OFFSET 0xd8
+#define NAND_ERR_ERRVAL2_OFFSET 0xdc
+
+/* NOTE: boards don't need to use these address bits
+ * for ALE/CLE unless they support booting from NAND.
+ * They're used unless platform data overrides them.
+ */
+#define MASK_ALE 0x08
+#define MASK_CLE 0x10
+
+struct davinci_nand_pdata { /* platform_data */
+ uint32_t mask_ale;
+ uint32_t mask_cle;
+
+ /* for packages using two chipselects */
+ uint32_t mask_chipsel;
+
+ /* board's default static partition info */
+ struct mtd_partition *parts;
+ unsigned nr_parts;
+
+ /* none == NAND_ECC_NONE (strongly *not* advised!!)
+ * soft == NAND_ECC_SOFT
+ * else == NAND_ECC_HW, according to ecc_bits
+ *
+ * All DaVinci-family chips support 1-bit hardware ECC.
+ * Newer ones also support 4-bit ECC, but are awkward
+ * using it with large page chips.
+ */
+ nand_ecc_modes_t ecc_mode;
+ u8 ecc_bits;
+
+ /* e.g. NAND_BUSWIDTH_16 */
+ unsigned options;
+ /* e.g. NAND_BBT_USE_FLASH */
+ unsigned bbt_options;
+
+ /* Main and mirror bbt descriptor overrides */
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
+
+ /* Access timings */
+ struct davinci_aemif_timing *timing;
+};
+
+#endif /* __ARCH_ARM_DAVINCI_NAND_H */
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+#include <linux/mtd/partitions.h>
+
+struct mxc_nand_platform_data {
+ unsigned int width; /* data bus width in bytes */
+ unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */
+ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+ struct mtd_partition *parts; /* partition table */
+ int nr_parts; /* size of parts */
+};
+#endif /* __ASM_ARCH_NAND_H */
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/gpmc.h>
+#include <linux/mtd/partitions.h>
+
+enum nand_io {
+ NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
+ NAND_OMAP_POLLED, /* polled mode, without prefetch */
+ NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
+ NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
+};
+
+struct omap_nand_platform_data {
+ int cs;
+ struct mtd_partition *parts;
+ struct gpmc_timings *gpmc_t;
+ int nr_parts;
+ bool dev_ready;
+ enum nand_io xfer_type;
+ int devsize;
+ enum omap_ecc ecc_opt;
+ struct gpmc_nand_regs reg;
+};
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
--- /dev/null
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_timing {
+ unsigned int tCH; /* Enable signal hold time */
+ unsigned int tCS; /* Enable signal setup time */
+ unsigned int tWH; /* ND_nWE high duration */
+ unsigned int tWP; /* ND_nWE pulse time */
+ unsigned int tRH; /* ND_nRE high duration */
+ unsigned int tRP; /* ND_nRE pulse width */
+ unsigned int tR; /* ND_nWE high to ND_nRE low for read */
+ unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
+ unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_cmdset {
+ uint16_t read1;
+ uint16_t read2;
+ uint16_t program;
+ uint16_t read_status;
+ uint16_t read_id;
+ uint16_t erase;
+ uint16_t reset;
+ uint16_t lock;
+ uint16_t unlock;
+ uint16_t lock_status;
+};
+
+struct pxa3xx_nand_flash {
+ char *name;
+ uint32_t chip_id;
+ unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
+ unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
+ unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
+ unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
+ unsigned int num_blocks; /* Number of physical blocks in Flash */
+
+ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+};
+
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
+struct pxa3xx_nand_platform_data {
+
+ /* the data flash bus is shared between the Static Memory
+ * Controller and the Data Flash Controller, the arbiter
+ * controls the ownership of the bus
+ */
+ int enable_arbiter;
+
+ /* allow platform code to keep OBM/bootloader defined NFC config */
+ int keep_config;
+
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
+
+ const struct pxa3xx_nand_flash * flash;
+ size_t num_flash;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc: Entirely disable ECC - Dangerous
+ * @flash_bbt: Openmoko u-boot can create a Bad Block Table
+ * Setting this flag will allow the kernel to
+ * look for it at boot time and also skip the NAND
+ * scan.
+ * @options: Default value to set into 'struct nand_chip' options.
+ * @nr_chips: Number of chips in this set
+ * @nr_partitions: Number of partitions pointed to by @partitions
+ * @name: Name of set (optional)
+ * @nr_map: Map for low-layer logical to physical chip numbers (option)
+ * @partitions: The mtd partition list
+ *
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
+struct s3c2410_nand_set {
+ unsigned int disable_ecc:1;
+ unsigned int flash_bbt:1;
+
+ unsigned int options;
+ int nr_chips;
+ int nr_partitions;
+ char *name;
+ int *nr_map;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecc_layout;
+};
+
+struct s3c2410_platform_nand {
+ /* timing information for controller, all times in nanoseconds */
+
+ int tacls; /* time for active CLE/ALE to nWE/nOE */
+ int twrph0; /* active time for nWE/nOE */
+ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
+
+ unsigned int ignore_unset_ecc:1;
+
+ int nr_sets;
+ struct s3c2410_nand_set *sets;
+
+ void (*select_chip)(struct s3c2410_nand_set *,
+ int chip);
+};
+
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
--- /dev/null
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+ struct mtd_partition *parts;
+ int nparts;
+ int options;
+ int (*init) (void);
+ int (*exit) (void);
+};
+
+#define NAND_IO_DATA 0x40000000
+#define NAND_IO_CMD 0x40800000
+#define NAND_IO_ADDR 0x41000000
+
+#endif /* __ASM_ARCH_NAND_H */
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
+struct onenand_freq_info {
+ u16 maf_id;
+ u16 dev_id;
+ u16 ver_id;
+};
+
+struct omap_onenand_platform_data {
+ int cs;
+ int gpio_irq;
+ struct mtd_partition *parts;
+ int nr_parts;
+ int (*onenand_setup)(void __iomem *, int *freq_ptr);
+ int (*get_freq)(const struct onenand_freq_info *freq_info,
+ bool *clk_dep);
+ int dma_channel;
+ u8 flags;
+ u8 regulator_can_sleep;
+ u8 skip_initial_unlocking;
+};
+
+#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/orion_nand.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
+
+/*
+ * Device bus NAND private data
+ */
+struct orion_nand_data {
+ struct mtd_partition *parts;
+ int (*dev_ready)(struct mtd_info *mtd);
+ u32 nr_parts;
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 width; /* buswidth */
+ u8 chip_delay;
+};
+
+
+#endif
--- /dev/null
+#ifndef __OMAP1_BL_H__
+#define __OMAP1_BL_H__
+
+#include <linux/device.h>
+
+struct omap_backlight_config {
+ int default_intensity;
+ int (*set_power)(struct device *dev, int state);
+};
+
+#endif
--- /dev/null
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+ int cd_gpio;
+ int rdy_gpio;
+ int pwr_gpio;
+ void (*reset)(int state);
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ * @pinctrl_device: pin control device to spawn as child
+ */
+struct u300_gpio_platform {
+ u8 ports;
+ int gpio_base;
+ int gpio_irq_base;
+ struct platform_device *pinctrl_device;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
--- /dev/null
+/*
+ * Remote Processor - omap-specific bits
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_REMOTEPROC_H
+#define _PLAT_REMOTEPROC_H
+
+struct rproc_ops;
+struct platform_device;
+
+/*
+ * struct omap_rproc_pdata - omap remoteproc's platform data
+ * @name: the remoteproc's name
+ * @oh_name: omap hwmod device
+ * @oh_name_opt: optional, secondary omap hwmod device
+ * @firmware: name of firmware file to load
+ * @mbox_name: name of omap mailbox device to use with this rproc
+ * @ops: start/stop rproc handlers
+ * @device_enable: omap-specific handler for enabling a device
+ * @device_shutdown: omap-specific handler for shutting down a device
+ */
+struct omap_rproc_pdata {
+ const char *name;
+ const char *oh_name;
+ const char *oh_name_opt;
+ const char *firmware;
+ const char *mbox_name;
+ const struct rproc_ops *ops;
+ int (*device_enable) (struct platform_device *pdev);
+ int (*device_shutdown) (struct platform_device *pdev);
+};
+
+#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
+
+void __init omap_rproc_reserve_cma(void);
+
+#else
+
+void __init omap_rproc_reserve_cma(void)
+{
+}
+
+#endif
+
+#endif /* _PLAT_REMOTEPROC_H */
--- /dev/null
+/*
+ * NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __SCCNXP_H
+#define __SCCNXP_H
+
+#define SCCNXP_MAX_UARTS 2
+
+/* Output lines */
+#define LINE_OP0 1
+#define LINE_OP1 2
+#define LINE_OP2 3
+#define LINE_OP3 4
+#define LINE_OP4 5
+#define LINE_OP5 6
+#define LINE_OP6 7
+#define LINE_OP7 8
+
+/* Input lines */
+#define LINE_IP0 9
+#define LINE_IP1 10
+#define LINE_IP2 11
+#define LINE_IP3 12
+#define LINE_IP4 13
+#define LINE_IP5 14
+#define LINE_IP6 15
+
+/* Signals */
+#define DTR_OP 0 /* DTR */
+#define RTS_OP 4 /* RTS */
+#define DSR_IP 8 /* DSR */
+#define CTS_IP 12 /* CTS */
+#define DCD_IP 16 /* DCD */
+#define RNG_IP 20 /* RNG */
+
+#define DIR_OP 24 /* Special signal for control RS-485.
+ * Goes high when transmit,
+ * then goes low.
+ */
+
+/* Routing control signal 'sig' to line 'line' */
+#define MCTRL_SIG(sig, line) ((line) << (sig))
+
+/*
+ * Example board initialization data:
+ *
+ * static struct resource sc2892_resources[] = {
+ * DEFINE_RES_MEM(UART_PHYS_START, 0x10),
+ * DEFINE_RES_IRQ(IRQ_EXT2),
+ * };
+ *
+ * static struct sccnxp_pdata sc2892_info = {
+ * .frequency = 3686400,
+ * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0),
+ * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1),
+ * };
+ *
+ * static struct platform_device sc2892 = {
+ * .name = "sc2892",
+ * .id = -1,
+ * .resource = sc2892_resources,
+ * .num_resources = ARRAY_SIZE(sc2892_resources),
+ * .dev = {
+ * .platform_data = &sc2892_info,
+ * },
+ * };
+ */
+
+/* SCCNXP platform data structure */
+struct sccnxp_pdata {
+ /* Frequency (extrenal clock or crystal) */
+ int frequency;
+ /* Shift for A0 line */
+ const u8 reg_shift;
+ /* Modem control lines configuration */
+ const u32 mctrl_cfg[SCCNXP_MAX_UARTS];
+ /* Called during startup */
+ void (*init)(void);
+ /* Called before finish */
+ void (*exit)(void);
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA (1<<1)
+
+struct imxuart_platform_data {
+ int (*init)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
+ unsigned int flags;
+ void (*irda_enable)(int enable);
+ unsigned int irda_inv_rx:1;
+ unsigned int irda_inv_tx:1;
+ unsigned short transceiver_delay;
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_SPI_H
+#define __ARCH_ARM_DAVINCI_SPI_H
+
+#include <mach/edma.h>
+
+#define SPI_INTERN_CS 0xFF
+
+enum {
+ SPI_VERSION_1, /* For DM355/DM365/DM6467 */
+ SPI_VERSION_2, /* For DA8xx */
+};
+
+/**
+ * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
+ *
+ * @version: version of the SPI IP. Different DaVinci devices have slightly
+ * varying versions of the same IP.
+ * @num_chipselect: number of chipselects supported by this SPI master
+ * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
+ * controller withn the SoC. Possible values are 0 and 1.
+ * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
+ * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
+ * to populate if all chip-selects are internal.
+ * @cshold_bug: set this to true if the SPI controller on your chip requires
+ * a write to CSHOLD bit in between transfers (like in DM355).
+ * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
+ * device on the bus.
+ */
+struct davinci_spi_platform_data {
+ u8 version;
+ u8 num_chipselect;
+ u8 intr_line;
+ u8 *chip_sel;
+ bool cshold_bug;
+ enum dma_event_q dma_event_q;
+};
+
+/**
+ * davinci_spi_config - Per-chip-select configuration for SPI slave devices
+ *
+ * @wdelay: amount of delay between transmissions. Measured in number of
+ * SPI module clocks.
+ * @odd_parity: polarity of parity flag at the end of transmit data stream.
+ * 0 - odd parity, 1 - even parity.
+ * @parity_enable: enable transmission of parity at end of each transmit
+ * data stream.
+ * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
+ * @timer_disable: disable chip-select timers (setup and hold)
+ * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
+ * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
+ * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
+ * in number of SPI clocks.
+ * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
+ * number of SPI clocks.
+ */
+struct davinci_spi_config {
+ u8 wdelay;
+ u8 odd_parity;
+ u8 parity_enable;
+#define SPI_IO_TYPE_INTR 0
+#define SPI_IO_TYPE_POLL 1
+#define SPI_IO_TYPE_DMA 2
+ u8 io_type;
+ u8 timer_disable;
+ u8 c2tdelay;
+ u8 t2cdelay;
+ u8 t2edelay;
+ u8 c2edelay;
+};
+
+#endif /* __ARCH_ARM_DAVINCI_SPI_H */
--- /dev/null
+#ifndef __ASM_MACH_EP93XX_SPI_H
+#define __ASM_MACH_EP93XX_SPI_H
+
+struct spi_device;
+
+/**
+ * struct ep93xx_spi_info - EP93xx specific SPI descriptor
+ * @num_chipselect: number of chip selects on this board, must be
+ * at least one
+ * @use_dma: use DMA for the transfers
+ */
+struct ep93xx_spi_info {
+ int num_chipselect;
+ bool use_dma;
+};
+
+/**
+ * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
+ * @setup: setup the chip select mechanism
+ * @cleanup: cleanup the chip select mechanism
+ * @cs_control: control the device chip select
+ */
+struct ep93xx_spi_chip_ops {
+ int (*setup)(struct spi_device *spi);
+ void (*cleanup)(struct spi_device *spi);
+ void (*cs_control)(struct spi_device *spi, int value);
+};
+
+#endif /* __ASM_MACH_EP93XX_SPI_H */
--- /dev/null
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ * pins, numbers < 0 mean internal CSPI chipselects according
+ * to MXC_SPI_CS(). Normally you want to use gpio based chip
+ * selects as the CSPI module tries to be intelligent about
+ * when to assert the chipselect: The CSPI module deasserts the
+ * chipselect once it runs out of input data. The other problem
+ * is that it is not possible to mix between high active and low
+ * active chipselects on one single bus using the internal
+ * chipselects. Unfortunately Freescale decided to put some
+ * chipselects on dedicated pins which are not usable as gpios,
+ * so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+ int *chipselect;
+ int num_chipselect;
+};
+
+#define MXC_SPI_CS(no) ((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H
+
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+
+struct nuc900_spi_info {
+ unsigned int num_cs;
+ unsigned int lsb;
+ unsigned int txneg;
+ unsigned int rxneg;
+ unsigned int divider;
+ unsigned int sleep;
+ unsigned int txnum;
+ unsigned int txbitlen;
+ int bus_num;
+};
+
+struct nuc900_spi_chip {
+ unsigned char bits_per_word;
+};
+
+#endif /* __ASM_ARCH_SPI_H */
--- /dev/null
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+struct omap2_mcspi_platform_config {
+ unsigned short num_cs;
+ unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+ unsigned short num_chipselect;
+};
+
+struct omap2_mcspi_device_config {
+ unsigned turbo_mode:1;
+};
+
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+struct platform_device;
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ * Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+ u8 fb_delay;
+ unsigned line;
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ */
+struct s3c64xx_spi_info {
+ int src_clk_nr;
+ int num_cs;
+ int (*cfg_gpio)(void);
+};
+
+/**
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
+ * initialization code.
+ * @cfg_gpio: Pointer to gpio setup function.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
+extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
+extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
+
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(void);
+extern int s3c64xx_spi1_cfg_gpio(void);
+extern int s3c64xx_spi2_cfg_gpio(void);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
+#endif /* __S3C64XX_PLAT_SPI_H */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+ int delay;
+ int presc;
+ int oversampling_shift;
+ void (*cfg_gpio)(struct platform_device *dev);
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARM_TS_H */
--- /dev/null
+/*
+ * USB related definitions
+ *
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD (1 << 17)
+#define CFGCHIP2_VBUSSENSE (1 << 16)
+#define CFGCHIP2_RESET (1 << 15)
+#define CFGCHIP2_OTGMODE (3 << 13)
+#define CFGCHIP2_NO_OVERRIDE (0 << 13)
+#define CFGCHIP2_FORCE_HOST (1 << 13)
+#define CFGCHIP2_FORCE_DEVICE (2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
+#define CFGCHIP2_PHYPWRDN (1 << 10)
+#define CFGCHIP2_OTGPWRDN (1 << 9)
+#define CFGCHIP2_DATPOL (1 << 8)
+#define CFGCHIP2_USB1SUSPENDM (1 << 7)
+#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
+#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
+#define CFGCHIP2_REFFREQ (0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
+
+struct da8xx_ohci_root_hub;
+
+typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
+ unsigned port);
+
+/* Passed as the platform data to the OHCI driver */
+struct da8xx_ohci_root_hub {
+ /* Switch the port power on/off */
+ int (*set_power)(unsigned port, int on);
+ /* Read the port power status */
+ int (*get_power)(unsigned port);
+ /* Read the port over-current indicator */
+ int (*get_oci)(unsigned port);
+ /* Over-current indicator change notification (pass NULL to disable) */
+ int (*ocic_notify)(da8xx_ocic_handler_t handler);
+
+ /* Time from power on to power good (in 2 ms units) */
+ u8 potpgt;
+};
+
+void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+
+#endif /* ifndef __ASM_ARCH_USB_H */
--- /dev/null
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
+
+#define MXC_USBCTRL_OFFSET 0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
+
+#define MX5_USBOTHER_REGS_OFFSET 0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
+
+struct mxc_usbh_platform_data {
+ int (*init)(struct platform_device *pdev);
+ int (*exit)(struct platform_device *pdev);
+
+ unsigned int portsc;
+ struct usb_phy *otg;
+};
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
+
+#include <linux/mbus.h>
+
+enum orion_ehci_phy_ver {
+ EHCI_PHY_ORION,
+ EHCI_PHY_DD,
+ EHCI_PHY_KW,
+ EHCI_PHY_NA,
+};
+
+struct orion_ehci_data {
+ enum orion_ehci_phy_ver phy_version;
+};
+
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MXC_USB
+#define __ASM_ARCH_MXC_USB
+
+struct imxusb_platform_data {
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+};
+
+#endif /* __ASM_ARCH_MXC_USB */
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+#include <linux/dmaengine.h>
+
+#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+
+struct ux500_musb_board_data {
+ void **dma_rx_param_array;
+ void **dma_tx_param_array;
+ u32 num_rx_channels;
+ u32 num_tx_channels;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+void ux500_add_usb(struct device *parent, resource_size_t base,
+ int irq, int *dma_rx_cfg, int *dma_tx_cfg);
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MX21_USBH
+#define __ASM_ARCH_MX21_USBH
+
+enum mx21_usbh_xcvr {
+ /* Values below as used by hardware (HWMODE register) */
+ MX21_USBXCVR_TXDIF_RXDIF = 0,
+ MX21_USBXCVR_TXDIF_RXSE = 1,
+ MX21_USBXCVR_TXSE_RXDIF = 2,
+ MX21_USBXCVR_TXSE_RXSE = 3,
+};
+
+struct mx21_usbh_platform_data {
+ enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
+ enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+ u16 enable_host1:1,
+ enable_host2:1,
+ enable_otg_host:1, /* enable "OTG" port (as host) */
+ host1_xcverless:1, /* traceiverless host1 port */
+ host1_txenoe:1, /* output enable host1 transmit enable */
+ otg_ext_xcvr:1, /* external tranceiver for OTG port */
+ unused:10;
+};
+
+#endif /* __ASM_ARCH_MX21_USBH */
--- /dev/null
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+
+ unsigned long flags;
+#define ENABLE_PORT1 (1 << 0)
+#define ENABLE_PORT2 (1 << 1)
+#define ENABLE_PORT3 (1 << 2)
+#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW (1 << 3)
+#define POWER_CONTROL_LOW (1 << 4)
+#define NO_OC_PROTECTION (1 << 5)
+#define OC_MODE_GLOBAL (0 << 6)
+#define OC_MODE_PERPORT (1 << 6)
+
+ int power_on_delay; /* Power On to Power Good time - in ms
+ * HCD must wait for this duration before
+ * accessing a powered on port
+ */
+ int port_mode;
+#define PMM_NPS_MODE 1
+#define PMM_GLOBAL_MODE 2
+#define PMM_PERPORT_MODE 3
+
+ int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB host port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H
+
+#define S3C_HCDFLG_USED (1)
+
+struct s3c2410_hcd_port {
+ unsigned char flags;
+ unsigned char power;
+ unsigned char oc_status;
+ unsigned char oc_changed;
+};
+
+struct s3c2410_hcd_info {
+ struct usb_hcd *hcd;
+ struct s3c2410_hcd_port port[2];
+
+ void (*power_control)(int port, int to);
+ void (*enable_oc)(struct s3c2410_hcd_info *, int on);
+ void (*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+ if (info->report_oc != NULL) {
+ (info->report_oc)(info, ports);
+ }
+}
+
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
--- /dev/null
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN (1 << 0)
+#define ULPI_SER_3PIN (1 << 1)
+ unsigned int ulpi_mode;
+
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Changelog:
+ * 14-Mar-2005 RTP Created file
+ * 02-Aug-2005 RTP File rename
+ * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
+ * 18-Jan-2007 HMW Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+ S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
+ S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
+ S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+ void (*udc_command)(enum s3c2410_udc_cmd_e);
+ void (*vbus_draw)(unsigned int ma);
+
+ unsigned int pullup_pin;
+ unsigned int pullup_pin_inverted;
+
+ unsigned int vbus_pin;
+ unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+struct s3c24xx_hsudc_platdata;
+
+extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB 0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1)
+#define EP93XXFB_VSYNC_ENABLE (1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC (1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH (1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7)
+#define EP93XXFB_PCLK_FALLING (1 << 8)
+#define EP93XXFB_ENABLE_AC (1 << 9)
+#define EP93XXFB_ENABLE_LCD (1 << 10)
+#define EP93XXFB_ENABLE_CCIR (1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT (1 << 14)
+#define EP93XXFB_USB_INTERLACE (1 << 16)
+#define EP93XXFB_USE_EQUALIZATION (1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT (1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL (1 << 20)
+#define EP93XXFB_USE_SDCSN0 (0 << 21)
+#define EP93XXFB_USE_SDCSN1 (1 << 21)
+#define EP93XXFB_USE_SDCSN2 (2 << 21)
+#define EP93XXFB_USE_SDCSN3 (3 << 21)
+
+#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \
+ EP93XXFB_PIXEL_CLOCK_ENABLE | \
+ EP93XXFB_VSYNC_ENABLE | \
+ EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+ unsigned int num_modes;
+ const struct fb_videomode *modes;
+ const struct fb_videomode *default_mode;
+ int bpp;
+ unsigned int flags;
+
+ int (*setup)(struct platform_device *pdev);
+ void (*teardown)(struct platform_device *pdev);
+ void (*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */
--- /dev/null
+/*
+ * This structure describes the machine which we are running on.
+ */
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
+
+#include <linux/fb.h>
+
+#define PCR_TFT (1 << 31)
+#define PCR_COLOR (1 << 30)
+#define PCR_PBSIZ_1 (0 << 28)
+#define PCR_PBSIZ_2 (1 << 28)
+#define PCR_PBSIZ_4 (2 << 28)
+#define PCR_PBSIZ_8 (3 << 28)
+#define PCR_BPIX_1 (0 << 25)
+#define PCR_BPIX_2 (1 << 25)
+#define PCR_BPIX_4 (2 << 25)
+#define PCR_BPIX_8 (3 << 25)
+#define PCR_BPIX_12 (4 << 25)
+#define PCR_BPIX_16 (5 << 25)
+#define PCR_BPIX_18 (6 << 25)
+#define PCR_PIXPOL (1 << 24)
+#define PCR_FLMPOL (1 << 23)
+#define PCR_LPPOL (1 << 22)
+#define PCR_CLKPOL (1 << 21)
+#define PCR_OEPOL (1 << 20)
+#define PCR_SCLKIDLE (1 << 19)
+#define PCR_END_SEL (1 << 18)
+#define PCR_END_BYTE_SWAP (1 << 17)
+#define PCR_REV_VS (1 << 16)
+#define PCR_ACD_SEL (1 << 15)
+#define PCR_ACD(x) (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL (1 << 7)
+#define PCR_SHARP (1 << 6)
+#define PCR_PCD(x) ((x) & 0x3f)
+
+#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK (1 << 15)
+#define PWMR_SCR1 (1 << 10)
+#define PWMR_SCR0 (1 << 9)
+#define PWMR_CC_EN (1 << 8)
+#define PWMR_PW(x) ((x) & 0xff)
+
+#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x) (((x) & 0xf))
+
+#define DMACR_BURST (1 << 31)
+#define DMACR_HM(x) (((x) & 0xf) << 16)
+#define DMACR_TM(x) ((x) & 0xf)
+
+struct imx_fb_videomode {
+ struct fb_videomode mode;
+ u32 pcr;
+ unsigned char bpp;
+};
+
+struct imx_fb_platform_data {
+ struct imx_fb_videomode *mode;
+ int num_modes;
+
+ u_int cmap_greyscale:1,
+ cmap_inverse:1,
+ cmap_static:1,
+ unused:29;
+
+ u_int pwmr;
+ u_int lscr1;
+ u_int dmacr;
+
+ u_char * fixed_screen_cpu;
+ dma_addr_t fixed_screen_dma;
+
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+
+ void (*lcd_power)(int);
+ void (*backlight_power)(int);
+};
+
+void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */
--- /dev/null
+/* arch/arm/mach-msm/include/mach/msm_fb.h
+ *
+ * Internal shared definitions for various MSM framebuffer parts.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MSM_FB_H_
+#define _MSM_FB_H_
+
+#include <linux/device.h>
+
+struct mddi_info;
+
+struct msm_fb_data {
+ int xres; /* x resolution in pixels */
+ int yres; /* y resolution in pixels */
+ int width; /* disply width in mm */
+ int height; /* display height in mm */
+ unsigned output_format;
+};
+
+struct msmfb_callback {
+ void (*func)(struct msmfb_callback *);
+};
+
+enum {
+ MSM_MDDI_PMDH_INTERFACE,
+ MSM_MDDI_EMDH_INTERFACE,
+ MSM_EBI2_INTERFACE,
+};
+
+#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0)
+
+struct msm_panel_data {
+ /* turns off the fb memory */
+ int (*suspend)(struct msm_panel_data *);
+ /* turns on the fb memory */
+ int (*resume)(struct msm_panel_data *);
+ /* turns off the panel */
+ int (*blank)(struct msm_panel_data *);
+ /* turns on the panel */
+ int (*unblank)(struct msm_panel_data *);
+ void (*wait_vsync)(struct msm_panel_data *);
+ void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
+ void (*clear_vsync)(struct msm_panel_data *);
+ /* from the enum above */
+ unsigned interface_type;
+ /* data to be passed to the fb driver */
+ struct msm_fb_data *fb_data;
+
+ /* capabilities supported by the panel */
+ uint32_t caps;
+};
+
+struct msm_mddi_client_data {
+ void (*suspend)(struct msm_mddi_client_data *);
+ void (*resume)(struct msm_mddi_client_data *);
+ void (*activate_link)(struct msm_mddi_client_data *);
+ void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
+ uint32_t reg);
+ uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
+ void (*auto_hibernate)(struct msm_mddi_client_data *, int);
+ /* custom data that needs to be passed from the board file to a
+ * particular client */
+ void *private_client_data;
+ struct resource *fb_resource;
+ /* from the list above */
+ unsigned interface_type;
+};
+
+struct msm_mddi_platform_data {
+ unsigned int clk_rate;
+ void (*power_client)(struct msm_mddi_client_data *, int on);
+
+ /* fixup the mfr name, product id */
+ void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
+
+ struct resource *fb_resource; /*optional*/
+ /* number of clients in the list that follows */
+ int num_clients;
+ /* array of client information of clients */
+ struct {
+ unsigned product_id; /* mfr id in top 16 bits, product id
+ * in lower 16 bits
+ */
+ char *name; /* the device name will be the platform
+ * device name registered for the client,
+ * it should match the name of the associated
+ * driver
+ */
+ unsigned id; /* id for mddi client device node, will also
+ * be used as device id of panel devices, if
+ * the client device will have multiple panels
+ * space must be left here for them
+ */
+ void *client_data; /* required private client data */
+ unsigned int clk_rate; /* optional: if the client requires a
+ * different mddi clk rate
+ */
+ } client_platform_data[];
+};
+
+struct mdp_blit_req;
+struct fb_info;
+struct mdp_device {
+ struct device dev;
+ void (*dma)(struct mdp_device *mpd, uint32_t addr,
+ uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
+ uint32_t y, struct msmfb_callback *callback, int interface);
+ void (*dma_wait)(struct mdp_device *mdp);
+ int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
+ struct mdp_blit_req *req);
+ void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
+};
+
+struct class_interface;
+int register_mdp_client(struct class_interface *class_intf);
+
+/**** private client data structs go below this line ***/
+
+struct msm_mddi_bridge_platform_data {
+ /* from board file */
+ int (*init)(struct msm_mddi_bridge_platform_data *,
+ struct msm_mddi_client_data *);
+ int (*uninit)(struct msm_mddi_bridge_platform_data *,
+ struct msm_mddi_client_data *);
+ /* passed to panel for use by the fb driver */
+ int (*blank)(struct msm_mddi_bridge_platform_data *,
+ struct msm_mddi_client_data *);
+ int (*unblank)(struct msm_mddi_bridge_platform_data *,
+ struct msm_mddi_client_data *);
+ struct msm_fb_data fb_data;
+};
+
+
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH 0x80000000
+#define FB_SYNC_CLK_INVERT 0x40000000
+#define FB_SYNC_DATA_INVERT 0x20000000
+#define FB_SYNC_CLK_IDLE_EN 0x10000000
+#define FB_SYNC_SHARP_MODE 0x08000000
+#define FB_SYNC_SWAP_RGB 0x04000000
+#define FB_SYNC_CLK_SEL_EN 0x02000000
+
+/*
+ * Specify the way your display is connected. The IPU can arbitrarily
+ * map the internal colors to the external data lines. We only support
+ * the following mappings at the moment.
+ */
+enum disp_data_mapping {
+ /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
+ IPU_DISP_DATA_MAPPING_RGB666,
+ /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
+ IPU_DISP_DATA_MAPPING_RGB565,
+ /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
+ IPU_DISP_DATA_MAPPING_RGB888,
+};
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev: pointer to the dma-device, used for dma-slave connection
+ * @mode: pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+ struct device *dma_dev;
+ const char *name;
+ const struct fb_videomode *mode;
+ int num_modes;
+ enum disp_data_mapping disp_data_fmt;
+};
+
+#endif
--- /dev/null
+/* linux/include/asm/arch-nuc900/fb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Changelog:
+ *
+ * 2008/08/26 vincen.zswan modify this file for LCD.
+ */
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+
+
+/* LCD Controller Hardware Desc */
+struct nuc900fb_hw {
+ unsigned int lcd_dccs;
+ unsigned int lcd_device_ctrl;
+ unsigned int lcd_mpulcd_cmd;
+ unsigned int lcd_int_cs;
+ unsigned int lcd_crtc_size;
+ unsigned int lcd_crtc_dend;
+ unsigned int lcd_crtc_hr;
+ unsigned int lcd_crtc_hsync;
+ unsigned int lcd_crtc_vr;
+ unsigned int lcd_va_baddr0;
+ unsigned int lcd_va_baddr1;
+ unsigned int lcd_va_fbctrl;
+ unsigned int lcd_va_scale;
+ unsigned int lcd_va_test;
+ unsigned int lcd_va_win;
+ unsigned int lcd_va_stuff;
+};
+
+/* LCD Display Description */
+struct nuc900fb_display {
+ /* LCD Image type */
+ unsigned type;
+
+ /* LCD Screen Size */
+ unsigned short width;
+ unsigned short height;
+
+ /* LCD Screen Info */
+ unsigned short xres;
+ unsigned short yres;
+ unsigned short bpp;
+
+ unsigned long pixclock;
+ unsigned short left_margin;
+ unsigned short right_margin;
+ unsigned short hsync_len;
+ unsigned short upper_margin;
+ unsigned short lower_margin;
+ unsigned short vsync_len;
+
+ /* hardware special register value */
+ unsigned int dccs;
+ unsigned int devctl;
+ unsigned int fbctrl;
+ unsigned int scale;
+};
+
+struct nuc900fb_mach_info {
+ struct nuc900fb_display *displays;
+ unsigned num_displays;
+ unsigned default_display;
+ /* GPIO Setting Info */
+ unsigned gpio_dir;
+ unsigned gpio_dir_mask;
+ unsigned gpio_data;
+ unsigned gpio_data_mask;
+};
+
+extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
--- /dev/null
+/*
+ * arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ * Support for the xscale frame buffer.
+ *
+ * Author: Jean-Frederic Clere
+ * Created: Sep 22, 2003
+ * Copyright: jfclere@sinix.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ * STN - for passive matrix
+ * DSTN - for dual scan passive matrix
+ * TFT - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit 18 : for output enable polarity
+ * bit 19 : for pixel clock edge
+ * bit 20 : for output pixel format when base is RGBT16
+ */
+#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_MASK 0xf
+#define LCD_TYPE_UNKNOWN 0
+#define LCD_TYPE_MONO_STN 1
+#define LCD_TYPE_MONO_DSTN 2
+#define LCD_TYPE_COLOR_STN 3
+#define LCD_TYPE_COLOR_DSTN 4
+#define LCD_TYPE_COLOR_TFT 5
+#define LCD_TYPE_SMART_PANEL 6
+#define LCD_TYPE_MAX 7
+
+#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
+#define LCD_BIAS_ACTIVE_LOW (1 << 18)
+#define LCD_PCLK_EDGE_RISE (0 << 19)
+#define LCD_PCLK_EDGE_FALL (1 << 19)
+#define LCD_ALTERNATE_MAPPING (1 << 20)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+ u_long pixclock;
+
+ u_short xres;
+ u_short yres;
+
+ u_char bpp;
+ u_int cmap_greyscale:1,
+ depth:8,
+ transparency:1,
+ unused:22;
+
+ /* Parallel Mode Timing */
+ u_char hsync_len;
+ u_char left_margin;
+ u_char right_margin;
+
+ u_char vsync_len;
+ u_char upper_margin;
+ u_char lower_margin;
+ u_char sync;
+
+ /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+ * Note:
+ * 1. all parameters in nanosecond (ns)
+ * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+ * in pxa27x and pxa3xx, initialize them to the same value or
+ * the larger one will be used
+ * 3. same to {rd,wr}_pulse_width
+ *
+ * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
+ * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
+ * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
+ */
+ unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+ unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+ unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
+ unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
+ unsigned cmd_inh_time; /* Command Inhibit time between two writes */
+ unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+ struct pxafb_mode_info *modes;
+ unsigned int num_modes;
+
+ unsigned int lcd_conn;
+ unsigned long video_mem_size;
+
+ u_int fixed_modes:1,
+ cmap_inverse:1,
+ cmap_static:1,
+ acceleration_enabled:1,
+ unused:28;
+
+ /* The following should be defined in LCCR0
+ * LCCR0_Act or LCCR0_Pas Active or Passive
+ * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
+ * LCCR0_Mono or LCCR0_Color Mono/Color
+ * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+ * LCCR0_DMADel(Tcpu) (optional) DMA request delay
+ *
+ * The following should not be defined in LCCR0:
+ * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+ * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+ */
+ u_int lccr0;
+ /* The following should be defined in LCCR3
+ * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
+ * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+ * LCCR3_Acb(X) AB Bias pin frequency
+ * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
+ *
+ * The following should not be defined in LCCR3
+ * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+ */
+ u_int lccr3;
+ /* The following should be defined in LCCR4
+ * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+ *
+ * All other bits in LCCR4 should be left alone.
+ */
+ u_int lccr4;
+ void (*pxafb_backlight_power)(int);
+ void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+ void (*smart_update)(struct fb_info *);
+};
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+ uint16_t *cmds, int n)
+{
+ return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+ struct fb_videomode mode;
+ u32 xres_virtual;
+ u32 yres_virtual;
+ u32 bpp;
+ unsigned long video_mem_phys;
+ void *video_mem_virt;
+ unsigned long video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
--- /dev/null
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
+#endif
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * sc26198.h -- SC26198 UART hardware info.
- *
- * Copyright (C) 1995-1998 Stallion Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _SC26198_H
-#define _SC26198_H
-/*****************************************************************************/
-
-/*
- * Define the number of async ports per sc26198 uart device.
- */
-#define SC26198_PORTS 8
-
-/*
- * Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
- */
-#define SC26198_MASTERCLOCK 14745600L
-#define SC26198_DCLK (SC26198_MASTERCLOCK)
-#define SC26198_CCLK (SC26198_MASTERCLOCK / 2)
-#define SC26198_BCLK (SC26198_MASTERCLOCK / 4)
-
-/*
- * Define internal FIFO sizes for the 26198 ports.
- */
-#define SC26198_TXFIFOSIZE 16
-#define SC26198_RXFIFOSIZE 16
-
-/*****************************************************************************/
-
-/*
- * Global register definitions. These registers are global to each 26198
- * device, not specific ports on it.
- */
-#define TSTR 0x0d
-#define GCCR 0x0f
-#define ICR 0x1b
-#define WDTRCR 0x1d
-#define IVR 0x1f
-#define BRGTRUA 0x84
-#define GPOSR 0x87
-#define GPOC 0x8b
-#define UCIR 0x8c
-#define CIR 0x8c
-#define BRGTRUB 0x8d
-#define GRXFIFO 0x8e
-#define GTXFIFO 0x8e
-#define GCCR2 0x8f
-#define BRGTRLA 0x94
-#define GPOR 0x97
-#define GPOD 0x9b
-#define BRGTCR 0x9c
-#define GICR 0x9c
-#define BRGTRLB 0x9d
-#define GIBCR 0x9d
-#define GITR 0x9f
-
-/*
- * Per port channel registers. These are the register offsets within
- * the port address space, so need to have the port address (0 to 7)
- * inserted in bit positions 4:6.
- */
-#define MR0 0x00
-#define MR1 0x01
-#define IOPCR 0x02
-#define BCRBRK 0x03
-#define BCRCOS 0x04
-#define BCRX 0x06
-#define BCRA 0x07
-#define XONCR 0x08
-#define XOFFCR 0x09
-#define ARCR 0x0a
-#define RXCSR 0x0c
-#define TXCSR 0x0e
-#define MR2 0x80
-#define SR 0x81
-#define SCCR 0x81
-#define ISR 0x82
-#define IMR 0x82
-#define TXFIFO 0x83
-#define RXFIFO 0x83
-#define IPR 0x84
-#define IOPIOR 0x85
-#define XISR 0x86
-
-/*
- * For any given port calculate the address to use to access a specified
- * register. This is only used for unusual access, mostly this is done
- * through the assembler access routines.
- */
-#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg))
-
-/*****************************************************************************/
-
-/*
- * Global configuration control register bit definitions.
- */
-#define GCCR_NOACK 0x00
-#define GCCR_IVRACK 0x02
-#define GCCR_IVRCHANACK 0x04
-#define GCCR_IVRTYPCHANACK 0x06
-#define GCCR_ASYNCCYCLE 0x00
-#define GCCR_SYNCCYCLE 0x40
-
-/*****************************************************************************/
-
-/*
- * Mode register 0 bit definitions.
- */
-#define MR0_ADDRNONE 0x00
-#define MR0_AUTOWAKE 0x01
-#define MR0_AUTODOZE 0x02
-#define MR0_AUTOWAKEDOZE 0x03
-#define MR0_SWFNONE 0x00
-#define MR0_SWFTX 0x04
-#define MR0_SWFRX 0x08
-#define MR0_SWFRXTX 0x0c
-#define MR0_TXMASK 0x30
-#define MR0_TXEMPTY 0x00
-#define MR0_TXHIGH 0x10
-#define MR0_TXHALF 0x20
-#define MR0_TXRDY 0x00
-#define MR0_ADDRNT 0x00
-#define MR0_ADDRT 0x40
-#define MR0_SWFNT 0x00
-#define MR0_SWFT 0x80
-
-/*
- * Mode register 1 bit definitions.
- */
-#define MR1_CS5 0x00
-#define MR1_CS6 0x01
-#define MR1_CS7 0x02
-#define MR1_CS8 0x03
-#define MR1_PAREVEN 0x00
-#define MR1_PARODD 0x04
-#define MR1_PARENB 0x00
-#define MR1_PARFORCE 0x08
-#define MR1_PARNONE 0x10
-#define MR1_PARSPECIAL 0x18
-#define MR1_ERRCHAR 0x00
-#define MR1_ERRBLOCK 0x20
-#define MR1_ISRUNMASKED 0x00
-#define MR1_ISRMASKED 0x40
-#define MR1_AUTORTS 0x80
-
-/*
- * Mode register 2 bit definitions.
- */
-#define MR2_STOP1 0x00
-#define MR2_STOP15 0x01
-#define MR2_STOP2 0x02
-#define MR2_STOP916 0x03
-#define MR2_RXFIFORDY 0x00
-#define MR2_RXFIFOHALF 0x04
-#define MR2_RXFIFOHIGH 0x08
-#define MR2_RXFIFOFULL 0x0c
-#define MR2_AUTOCTS 0x10
-#define MR2_TXRTS 0x20
-#define MR2_MODENORM 0x00
-#define MR2_MODEAUTOECHO 0x40
-#define MR2_MODELOOP 0x80
-#define MR2_MODEREMECHO 0xc0
-
-/*****************************************************************************/
-
-/*
- * Baud Rate Generator (BRG) selector values.
- */
-#define BRG_50 0x00
-#define BRG_75 0x01
-#define BRG_150 0x02
-#define BRG_200 0x03
-#define BRG_300 0x04
-#define BRG_450 0x05
-#define BRG_600 0x06
-#define BRG_900 0x07
-#define BRG_1200 0x08
-#define BRG_1800 0x09
-#define BRG_2400 0x0a
-#define BRG_3600 0x0b
-#define BRG_4800 0x0c
-#define BRG_7200 0x0d
-#define BRG_9600 0x0e
-#define BRG_14400 0x0f
-#define BRG_19200 0x10
-#define BRG_28200 0x11
-#define BRG_38400 0x12
-#define BRG_57600 0x13
-#define BRG_115200 0x14
-#define BRG_230400 0x15
-#define BRG_GIN0 0x16
-#define BRG_GIN1 0x17
-#define BRG_CT0 0x18
-#define BRG_CT1 0x19
-#define BRG_RX2TX316 0x1b
-#define BRG_RX2TX31 0x1c
-
-#define SC26198_MAXBAUD 921600
-
-/*****************************************************************************/
-
-/*
- * Command register command definitions.
- */
-#define CR_NULL 0x04
-#define CR_ADDRNORMAL 0x0c
-#define CR_RXRESET 0x14
-#define CR_TXRESET 0x1c
-#define CR_CLEARRXERR 0x24
-#define CR_BREAKRESET 0x2c
-#define CR_TXSTARTBREAK 0x34
-#define CR_TXSTOPBREAK 0x3c
-#define CR_RTSON 0x44
-#define CR_RTSOFF 0x4c
-#define CR_ADDRINIT 0x5c
-#define CR_RXERRBLOCK 0x6c
-#define CR_TXSENDXON 0x84
-#define CR_TXSENDXOFF 0x8c
-#define CR_GANGXONSET 0x94
-#define CR_GANGXOFFSET 0x9c
-#define CR_GANGXONINIT 0xa4
-#define CR_GANGXOFFINIT 0xac
-#define CR_HOSTXON 0xb4
-#define CR_HOSTXOFF 0xbc
-#define CR_CANCELXOFF 0xc4
-#define CR_ADDRRESET 0xdc
-#define CR_RESETALLPORTS 0xf4
-#define CR_RESETALL 0xfc
-
-#define CR_RXENABLE 0x01
-#define CR_TXENABLE 0x02
-
-/*****************************************************************************/
-
-/*
- * Channel status register.
- */
-#define SR_RXRDY 0x01
-#define SR_RXFULL 0x02
-#define SR_TXRDY 0x04
-#define SR_TXEMPTY 0x08
-#define SR_RXOVERRUN 0x10
-#define SR_RXPARITY 0x20
-#define SR_RXFRAMING 0x40
-#define SR_RXBREAK 0x80
-
-#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
-
-/*****************************************************************************/
-
-/*
- * Interrupt status register and interrupt mask register bit definitions.
- */
-#define IR_TXRDY 0x01
-#define IR_RXRDY 0x02
-#define IR_RXBREAK 0x04
-#define IR_XONXOFF 0x10
-#define IR_ADDRRECOG 0x20
-#define IR_RXWATCHDOG 0x40
-#define IR_IOPORT 0x80
-
-/*****************************************************************************/
-
-/*
- * Interrupt vector register field definitions.
- */
-#define IVR_CHANMASK 0x07
-#define IVR_TYPEMASK 0x18
-#define IVR_CONSTMASK 0xc0
-
-#define IVR_RXDATA 0x10
-#define IVR_RXBADDATA 0x18
-#define IVR_TXDATA 0x08
-#define IVR_OTHER 0x00
-
-/*****************************************************************************/
-
-/*
- * BRG timer control register bit definitions.
- */
-#define BRGCTCR_DISABCLK0 0x00
-#define BRGCTCR_ENABCLK0 0x08
-#define BRGCTCR_DISABCLK1 0x00
-#define BRGCTCR_ENABCLK1 0x80
-
-#define BRGCTCR_0SCLK16 0x00
-#define BRGCTCR_0SCLK32 0x01
-#define BRGCTCR_0SCLK64 0x02
-#define BRGCTCR_0SCLK128 0x03
-#define BRGCTCR_0X1 0x04
-#define BRGCTCR_0X12 0x05
-#define BRGCTCR_0IO1A 0x06
-#define BRGCTCR_0GIN0 0x07
-
-#define BRGCTCR_1SCLK16 0x00
-#define BRGCTCR_1SCLK32 0x10
-#define BRGCTCR_1SCLK64 0x20
-#define BRGCTCR_1SCLK128 0x30
-#define BRGCTCR_1X1 0x40
-#define BRGCTCR_1X12 0x50
-#define BRGCTCR_1IO1B 0x60
-#define BRGCTCR_1GIN1 0x70
-
-/*****************************************************************************/
-
-/*
- * Watch dog timer enable register.
- */
-#define WDTRCR_ENABALL 0xff
-
-/*****************************************************************************/
-
-/*
- * XON/XOFF interrupt status register.
- */
-#define XISR_TXCHARMASK 0x03
-#define XISR_TXCHARNORMAL 0x00
-#define XISR_TXWAIT 0x01
-#define XISR_TXXOFFPEND 0x02
-#define XISR_TXXONPEND 0x03
-
-#define XISR_TXFLOWMASK 0x0c
-#define XISR_TXNORMAL 0x00
-#define XISR_TXSTOPPEND 0x04
-#define XISR_TXSTARTED 0x08
-#define XISR_TXSTOPPED 0x0c
-
-#define XISR_RXFLOWMASK 0x30
-#define XISR_RXFLOWNONE 0x00
-#define XISR_RXXONSENT 0x10
-#define XISR_RXXOFFSENT 0x20
-
-#define XISR_RXXONGOT 0x40
-#define XISR_RXXOFFGOT 0x80
-
-/*****************************************************************************/
-
-/*
- * Current interrupt register.
- */
-#define CIR_TYPEMASK 0xc0
-#define CIR_TYPEOTHER 0x00
-#define CIR_TYPETX 0x40
-#define CIR_TYPERXGOOD 0x80
-#define CIR_TYPERXBAD 0xc0
-
-#define CIR_RXDATA 0x80
-#define CIR_RXBADDATA 0x40
-#define CIR_TXDATA 0x40
-
-#define CIR_CHANMASK 0x07
-#define CIR_CNTMASK 0x38
-
-#define CIR_SUBTYPEMASK 0x38
-#define CIR_SUBNONE 0x00
-#define CIR_SUBCOS 0x08
-#define CIR_SUBADDR 0x10
-#define CIR_SUBXONXOFF 0x18
-#define CIR_SUBBREAK 0x28
-
-/*****************************************************************************/
-
-/*
- * Global interrupting channel register.
- */
-#define GICR_CHANMASK 0x07
-
-/*****************************************************************************/
-
-/*
- * Global interrupting byte count register.
- */
-#define GICR_COUNTMASK 0x0f
-
-/*****************************************************************************/
-
-/*
- * Global interrupting type register.
- */
-#define GITR_RXMASK 0xc0
-#define GITR_RXNONE 0x00
-#define GITR_RXBADDATA 0x80
-#define GITR_RXGOODDATA 0xc0
-#define GITR_TXDATA 0x20
-
-#define GITR_SUBTYPEMASK 0x07
-#define GITR_SUBNONE 0x00
-#define GITR_SUBCOS 0x01
-#define GITR_SUBADDR 0x02
-#define GITR_SUBXONXOFF 0x03
-#define GITR_SUBBREAK 0x05
-
-/*****************************************************************************/
-
-/*
- * Input port change register.
- */
-#define IPR_CTS 0x01
-#define IPR_DTR 0x02
-#define IPR_RTS 0x04
-#define IPR_DCD 0x08
-#define IPR_CTSCHANGE 0x10
-#define IPR_DTRCHANGE 0x20
-#define IPR_RTSCHANGE 0x40
-#define IPR_DCDCHANGE 0x80
-
-#define IPR_CHANGEMASK 0xf0
-
-/*****************************************************************************/
-
-/*
- * IO port interrupt and output register.
- */
-#define IOPR_CTS 0x01
-#define IOPR_DTR 0x02
-#define IOPR_RTS 0x04
-#define IOPR_DCD 0x08
-#define IOPR_CTSCOS 0x10
-#define IOPR_DTRCOS 0x20
-#define IOPR_RTSCOS 0x40
-#define IOPR_DCDCOS 0x80
-
-/*****************************************************************************/
-
-/*
- * IO port configuration register.
- */
-#define IOPCR_SETCTS 0x00
-#define IOPCR_SETDTR 0x04
-#define IOPCR_SETRTS 0x10
-#define IOPCR_SETDCD 0x00
-
-#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
-
-/*****************************************************************************/
-
-/*
- * General purpose output select register.
- */
-#define GPORS_TXC1XA 0x08
-#define GPORS_TXC16XA 0x09
-#define GPORS_RXC16XA 0x0a
-#define GPORS_TXC16XB 0x0b
-#define GPORS_GPOR3 0x0c
-#define GPORS_GPOR2 0x0d
-#define GPORS_GPOR1 0x0e
-#define GPORS_GPOR0 0x0f
-
-/*****************************************************************************/
-
-/*
- * General purpose output register.
- */
-#define GPOR_0 0x01
-#define GPOR_1 0x02
-#define GPOR_2 0x04
-#define GPOR_3 0x08
-
-/*****************************************************************************/
-
-/*
- * General purpose output clock register.
- */
-#define GPORC_0NONE 0x00
-#define GPORC_0GIN0 0x01
-#define GPORC_0GIN1 0x02
-#define GPORC_0IO3A 0x02
-
-#define GPORC_1NONE 0x00
-#define GPORC_1GIN0 0x04
-#define GPORC_1GIN1 0x08
-#define GPORC_1IO3C 0x0c
-
-#define GPORC_2NONE 0x00
-#define GPORC_2GIN0 0x10
-#define GPORC_2GIN1 0x20
-#define GPORC_2IO3E 0x20
-
-#define GPORC_3NONE 0x00
-#define GPORC_3GIN0 0x40
-#define GPORC_3GIN1 0x80
-#define GPORC_3IO3G 0xc0
-
-/*****************************************************************************/
-
-/*
- * General purpose output data register.
- */
-#define GPOD_0MASK 0x03
-#define GPOD_0SET1 0x00
-#define GPOD_0SET0 0x01
-#define GPOD_0SETR0 0x02
-#define GPOD_0SETIO3B 0x03
-
-#define GPOD_1MASK 0x0c
-#define GPOD_1SET1 0x00
-#define GPOD_1SET0 0x04
-#define GPOD_1SETR0 0x08
-#define GPOD_1SETIO3D 0x0c
-
-#define GPOD_2MASK 0x30
-#define GPOD_2SET1 0x00
-#define GPOD_2SET0 0x10
-#define GPOD_2SETR0 0x20
-#define GPOD_2SETIO3F 0x30
-
-#define GPOD_3MASK 0xc0
-#define GPOD_3SET1 0x00
-#define GPOD_3SET0 0x40
-#define GPOD_3SETR0 0x80
-#define GPOD_3SETIO3H 0xc0
-
-/*****************************************************************************/
-#endif
unsigned int smt_gain;
int flags; /* See SD_* */
int level;
- int idle_buddy; /* cpu assigned to select_idle_sibling() */
/* Runtime fields. */
unsigned long last_balance; /* init to jiffies. units in jiffies */
#include <linux/types.h>
+#include <linux/tty_flags.h>
+
#ifdef __KERNEL__
#include <asm/page.h>
+
/*
* Counters of the input lines (CTS, DSR, RI, CD) interrupts
*/
#define SERIAL_IO_HUB6 1
#define SERIAL_IO_MEM 2
-struct serial_uart_config {
- char *name;
- int dfl_xmit_fifo_size;
- int flags;
-};
-
#define UART_CLEAR_FIFO 0x01
#define UART_USE_FIFO 0x02
#define UART_STARTECH 0x04
#define UART_NATSEMI 0x08
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
- * on the callout port */
-#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
- * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
-#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
- * checks. Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER 15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING 27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW 23 /* flow control for console */
-#define ASYNCB_FIRST_KERNEL 22
-
-#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK (1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
- ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
/*
* Multiport serial configuration structure --- external structure
+++ /dev/null
-/*
- * serial167.h
- *
- * Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on cyclades.h
- */
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
- int magic;
- int type;
- int card;
- int line;
- int flags; /* defined in tty.h */
- struct tty_struct *tty;
- int read_status_mask;
- int timeout;
- int xmit_fifo_size;
- int cor1,cor2,cor3,cor4,cor5,cor6,cor7;
- int tbpr,tco,rbpr,rco;
- int ignore_status_mask;
- int close_delay;
- int IER; /* Interrupt Enable Register */
- unsigned long last_active;
- int count; /* # of fd on device */
- int x_char; /* to be pushed out ASAP */
- int x_break;
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- int default_threshold;
- int default_timeout;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct cyclades_monitor mon;
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-
-#define CyMaxChipsPerCard 1
-
-/**** cd2401 registers ****/
-
-#define CyGFRCR (0x81)
-#define CyCCR (0x13)
-#define CyCLR_CHAN (0x40)
-#define CyINIT_CHAN (0x20)
-#define CyCHIP_RESET (0x10)
-#define CyENB_XMTR (0x08)
-#define CyDIS_XMTR (0x04)
-#define CyENB_RCVR (0x02)
-#define CyDIS_RCVR (0x01)
-#define CyCAR (0xee)
-#define CyIER (0x11)
-#define CyMdmCh (0x80)
-#define CyRxExc (0x20)
-#define CyRxData (0x08)
-#define CyTxMpty (0x02)
-#define CyTxRdy (0x01)
-#define CyLICR (0x26)
-#define CyRISR (0x89)
-#define CyTIMEOUT (0x80)
-#define CySPECHAR (0x70)
-#define CyOVERRUN (0x08)
-#define CyPARITY (0x04)
-#define CyFRAME (0x02)
-#define CyBREAK (0x01)
-#define CyREOIR (0x84)
-#define CyTEOIR (0x85)
-#define CyMEOIR (0x86)
-#define CyNOTRANS (0x08)
-#define CyRFOC (0x30)
-#define CyRDR (0xf8)
-#define CyTDR (0xf8)
-#define CyMISR (0x8b)
-#define CyRISR (0x89)
-#define CyTISR (0x8a)
-#define CyMSVR1 (0xde)
-#define CyMSVR2 (0xdf)
-#define CyDSR (0x80)
-#define CyDCD (0x40)
-#define CyCTS (0x20)
-#define CyDTR (0x02)
-#define CyRTS (0x01)
-#define CyRTPRL (0x25)
-#define CyRTPRH (0x24)
-#define CyCOR1 (0x10)
-#define CyPARITY_NONE (0x00)
-#define CyPARITY_E (0x40)
-#define CyPARITY_O (0xC0)
-#define Cy_5_BITS (0x04)
-#define Cy_6_BITS (0x05)
-#define Cy_7_BITS (0x06)
-#define Cy_8_BITS (0x07)
-#define CyCOR2 (0x17)
-#define CyETC (0x20)
-#define CyCtsAE (0x02)
-#define CyCOR3 (0x16)
-#define Cy_1_STOP (0x02)
-#define Cy_2_STOP (0x04)
-#define CyCOR4 (0x15)
-#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
-#define CyCOR5 (0x14)
-#define CyCOR6 (0x18)
-#define CyCOR7 (0x07)
-#define CyRBPR (0xcb)
-#define CyRCOR (0xc8)
-#define CyTBPR (0xc3)
-#define CyTCOR (0xc0)
-#define CySCHR1 (0x1f)
-#define CySCHR2 (0x1e)
-#define CyTPR (0xda)
-#define CyPILR1 (0xe3)
-#define CyPILR2 (0xe0)
-#define CyPILR3 (0xe1)
-#define CyCMR (0x1b)
-#define CyASYNC (0x02)
-#define CyLICR (0x26)
-#define CyLIVR (0x09)
-#define CySCRL (0x23)
-#define CySCRH (0x22)
-#define CyTFTC (0x80)
-
-
-/* max number of chars in the FIFO */
-
-#define CyMAX_CHAR_FIFO 12
-
-/***************************************************************************/
* platform device. Using these will make your driver
* dependent on the 8250 driver.
*/
-struct uart_port;
-struct uart_8250_port;
+
+struct uart_8250_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
+
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+ unsigned char lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
+
+ /* 8250 specific callbacks */
+ int (*dl_read)(struct uart_8250_port *);
+ void (*dl_write)(struct uart_8250_port *, int);
+};
int serial8250_register_8250_port(struct uart_8250_port *);
-int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);
/* SH-SCI */
#define PORT_SCIFB 93
-/* MAX3107 */
-#define PORT_MAX3107 94
+/* MAX310X */
+#define PORT_MAX310X 94
/* High Speed UART for Medfield */
#define PORT_MFD 95
#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
+#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
+
#define UART_FCR 2 /* Out: FIFO Control Register */
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * stallion.h -- stallion multiport serial driver.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _STALLION_H
-#define _STALLION_H
-/*****************************************************************************/
-
-/*
- * Define important driver constants here.
- */
-#define STL_MAXBRDS 4
-#define STL_MAXPANELS 4
-#define STL_MAXBANKS 8
-#define STL_PORTSPERPANEL 16
-#define STL_MAXPORTS 64
-#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- * Define a set of structures to hold all the board/panel/port info
- * for our ports. These will be dynamically allocated as required.
- */
-
-/*
- * Define a ring queue structure for each port. This will hold the
- * TX data waiting to be output. Characters are fed into this buffer
- * from the line discipline (or even direct from user space!) and
- * then fed into the UARTs during interrupts. Will use a classic ring
- * queue here for this. The good thing about this type of ring queue
- * is that the head and tail pointers can be updated without interrupt
- * protection - since "write" code only needs to change the head, and
- * interrupt code only needs to change the tail.
- */
-struct stlrq {
- char *buf;
- char *head;
- char *tail;
-};
-
-/*
- * Port, panel and board structures to hold status info about each.
- * The board structure contains pointers to structures for each panel
- * connected to it, and in turn each panel structure contains pointers
- * for each port structure for each port on that panel. Note that
- * the port structure also contains the board and panel number that it
- * is associated with, this makes it (fairly) easy to get back to the
- * board/panel info for a port.
- */
-struct stlport {
- unsigned long magic;
- struct tty_port port;
- unsigned int portnr;
- unsigned int panelnr;
- unsigned int brdnr;
- int ioaddr;
- int uartaddr;
- unsigned int pagenr;
- unsigned long istate;
- int baud_base;
- int custom_divisor;
- int close_delay;
- int closing_wait;
- int openwaitcnt;
- int brklen;
- unsigned int sigs;
- unsigned int rxignoremsk;
- unsigned int rxmarkmsk;
- unsigned int imr;
- unsigned int crenable;
- unsigned long clk;
- unsigned long hwid;
- void *uartp;
- comstats_t stats;
- struct stlrq tx;
-};
-
-struct stlpanel {
- unsigned long magic;
- unsigned int panelnr;
- unsigned int brdnr;
- unsigned int pagenr;
- unsigned int nrports;
- int iobase;
- void *uartp;
- void (*isr)(struct stlpanel *panelp, unsigned int iobase);
- unsigned int hwid;
- unsigned int ackmask;
- struct stlport *ports[STL_PORTSPERPANEL];
-};
-
-struct stlbrd {
- unsigned long magic;
- unsigned int brdnr;
- unsigned int brdtype;
- unsigned int state;
- unsigned int nrpanels;
- unsigned int nrports;
- unsigned int nrbnks;
- int irq;
- int irqtype;
- int (*isr)(struct stlbrd *brdp);
- unsigned int ioaddr1;
- unsigned int ioaddr2;
- unsigned int iosize1;
- unsigned int iosize2;
- unsigned int iostatus;
- unsigned int ioctrl;
- unsigned int ioctrlval;
- unsigned int hwid;
- unsigned long clk;
- unsigned int bnkpageaddr[STL_MAXBANKS];
- unsigned int bnkstataddr[STL_MAXBANKS];
- struct stlpanel *bnk2panel[STL_MAXBANKS];
- struct stlpanel *panels[STL_MAXPANELS];
-};
-
-
-/*
- * Define MAGIC numbers used for above structures.
- */
-#define STL_PORTMAGIC 0x5a7182c9
-#define STL_PANELMAGIC 0x7ef621a1
-#define STL_BOARDMAGIC 0xa2267f52
-
-/*****************************************************************************/
-#endif
void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
int (*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+ void (*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*rpcbind)(struct rpc_task *task);
void (*set_port)(struct rpc_xprt *xprt, unsigned short port);
void (*connect)(struct rpc_task *task);
void xprt_reserve(struct rpc_task *task);
int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_prepare_transmit(struct rpc_task *task);
void xprt_transmit(struct rpc_task *task);
void xprt_end_transmit(struct rpc_task *task);
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
+#include <linux/tty_flags.h>
#define TTY_PARITY 3
#define TTY_OVERRUN 4
-#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
-#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
-#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
-#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
-#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
-#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
-#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
-#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
-#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
-#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
-#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
-#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
-#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
-#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
-#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
-#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
-#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-
-#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f))
+#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
+#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
+
+#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
+#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
+#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
+#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
- struct ktermios *termios, *termios_locked;
+ struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
extern int tty_unregister_driver(struct tty_driver *driver);
extern struct device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *dev);
+extern struct device *tty_register_device_attr(struct tty_driver *driver,
+ unsigned index, struct device *device,
+ void *drvdata,
+ const struct attribute_group **attr_grp);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
int buflen);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
extern void tty_driver_remove_tty(struct tty_driver *driver,
struct tty_struct *tty);
-extern void tty_shutdown(struct tty_struct *tty);
extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
extern void tty_port_init(struct tty_port *port);
+extern void tty_port_link_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index);
+extern struct device *tty_port_register_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device);
+extern struct device *tty_port_register_device_attr(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
return port;
}
+/* If the cts flow control is enabled, return true. */
+static inline bool tty_port_cts_enabled(struct tty_port *port)
+{
+ return port->flags & ASYNC_CTS_FLOW;
+}
+
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
+extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+ struct tty_struct *tty);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
static inline int tty_port_users(struct tty_port *port)
/* tty_mutex.c */
/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
/*
* this shall be called only from where BTM is held (like close)
static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
long timeout)
{
- tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+ tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
tty_wait_until_sent(tty, timeout);
- tty_lock();
+ tty_lock(tty);
}
/*
*
* Do not use in new code.
*/
-#define wait_event_interruptible_tty(wq, condition) \
+#define wait_event_interruptible_tty(tty, wq, condition) \
({ \
int __ret = 0; \
if (!(condition)) { \
- __wait_event_interruptible_tty(wq, condition, __ret); \
+ __wait_event_interruptible_tty(tty, wq, condition, __ret); \
} \
__ret; \
})
-#define __wait_event_interruptible_tty(wq, condition, ret) \
+#define __wait_event_interruptible_tty(tty, wq, condition, ret) \
do { \
DEFINE_WAIT(__wait); \
\
if (condition) \
break; \
if (!signal_pending(current)) { \
- tty_unlock(); \
+ tty_unlock(tty); \
schedule(); \
- tty_lock(); \
+ tty_lock(tty); \
continue; \
} \
ret = -ERESTARTSYS; \
*
* void (*shutdown)(struct tty_struct * tty);
*
- * This routine is called synchronously when a particular tty device
- * is closed for the last time freeing up the resources.
- * Note that tty_shutdown() is not called if ops->shutdown is defined.
- * This means one is responsible to take care of calling ops->remove (e.g.
- * via tty_driver_remove_tty) and releasing tty->termios.
- * Note that this hook may be called from *all* the contexts where one
- * uses tty refcounting (e.g. tty_port_tty_get).
- *
+ * This routine is called under the tty lock when a particular tty device
+ * is closed for the last time. It executes before the tty resources
+ * are freed so may execute while another function holds a tty kref.
*
* void (*cleanup)(struct tty_struct * tty);
*
struct tty_driver {
int magic; /* magic number for this structure */
struct kref kref; /* Reference management */
- struct cdev cdev;
+ struct cdev *cdevs;
struct module *owner;
const char *driver_name;
const char *name;
int name_base; /* offset of printed name */
int major; /* major device number */
int minor_start; /* start of minor device number */
- int num; /* number of devices allocated */
+ unsigned int num; /* number of devices allocated */
short type; /* type of tty driver */
short subtype; /* subtype of tty driver */
struct ktermios init_termios; /* Initial termios */
- int flags; /* tty driver flags */
+ unsigned long flags; /* tty driver flags */
struct proc_dir_entry *proc_entry; /* /proc fs entry */
struct tty_driver *other; /* only used for the PTY driver */
* Pointer to the tty data structures
*/
struct tty_struct **ttys;
+ struct tty_port **ports;
struct ktermios **termios;
void *driver_state;
extern struct list_head tty_drivers;
-extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
+extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
+ struct module *owner, unsigned long flags);
extern void put_tty_driver(struct tty_driver *driver);
extern void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op);
extern void tty_driver_kref_put(struct tty_driver *driver);
-#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+/* Use TTY_DRIVER_* flags below */
+#define tty_alloc_driver(lines, flags) \
+ __tty_alloc_driver(lines, THIS_MODULE, flags)
+
+/*
+ * DEPRECATED Do not use this in new code, use tty_alloc_driver instead.
+ * (And change the return value checks.)
+ */
+static inline struct tty_driver *alloc_tty_driver(unsigned int lines)
+{
+ struct tty_driver *ret = tty_alloc_driver(lines, 0);
+ if (IS_ERR(ret))
+ return NULL;
+ return ret;
+}
static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
{
* the requested timeout to the caller instead of using a simple
* on/off interface.
*
+ * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are
+ * needed per line for this driver as it would waste memory.
+ * The driver will take care.
+ *
+ * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In
+ * other words create /dev/ttyprintk and not /dev/ttyprintk0.
+ * Applicable only when a driver for a single tty device is
+ * being allocated.
*/
#define TTY_DRIVER_INSTALLED 0x0001
#define TTY_DRIVER_RESET_TERMIOS 0x0002
#define TTY_DRIVER_DYNAMIC_DEV 0x0008
#define TTY_DRIVER_DEVPTS_MEM 0x0010
#define TTY_DRIVER_HARDWARE_BREAK 0x0020
+#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040
+#define TTY_DRIVER_UNNUMBERED_NODE 0x0080
/* tty driver types */
#define TTY_DRIVER_TYPE_SYSTEM 0x0001
--- /dev/null
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
+ * on the callout port */
+#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
+ * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
+#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
+ * checks. Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER 15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING 27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW 23 /* flow control for console */
+#define ASYNCB_FIRST_KERNEL 22
+
+#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+ ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
};
/* SMP Commands */
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
int smp_user_confirm_reply(struct hci_conn *conn, u16 mgmt_op, __le32 passkey);
/* Same for payload size. See qos.c for the smallest max data size */
#define IRCOMM_TTY_DATA_UNINITIALISED (64 - IRCOMM_TTY_HDR_UNINITIALISED)
-/* Those are really defined in include/linux/serial.h - Jean II */
-#define ASYNC_B_INITIALIZED 31 /* Serial port was initialized */
-#define ASYNC_B_NORMAL_ACTIVE 29 /* Normal device is active */
-#define ASYNC_B_CLOSING 27 /* Serial port is closing */
-
/*
* IrCOMM TTY driver state
*/
struct ircomm_tty_cb {
irda_queue_t queue; /* Must be first */
+ struct tty_port port;
magic_t magic;
int state; /* Connect state */
- struct tty_struct *tty;
struct ircomm_cb *ircomm; /* IrCOMM layer instance */
struct sk_buff *tx_skb; /* Transmit buffer */
LOCAL_FLOW flow; /* IrTTP flow status */
int line;
- unsigned long flags;
__u8 dlsap_sel;
__u8 slsap_sel;
void *skey;
void *ckey;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
struct timer_list watchdog_timer;
struct work_struct tqueue;
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
-
- int open_count;
- int blocked_open; /* # of blocked opens */
-
/* Protect concurent access to :
- * o self->open_count
* o self->ctrl_skb
* o self->tx_skb
* Maybe other things may gain to be protected as well...
int (*check)(struct xfrm_state *x,
struct sk_buff *skb,
__be32 net_seq);
+ int (*recheck)(struct xfrm_state *x,
+ struct sk_buff *skb,
+ __be32 net_seq);
void (*notify)(struct xfrm_state *x, int event);
int (*overflow)(struct xfrm_state *x, struct sk_buff *skb);
};
struct se_device *(*create_virtdevice)(struct se_hba *,
struct se_subsystem_dev *, void *);
void (*free_device)(void *);
- int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *);
+ void (*transport_complete)(struct se_cmd *cmd,
+ struct scatterlist *,
+ unsigned char *);
int (*parse_cdb)(struct se_cmd *cmd);
ssize_t (*check_configfs_dev_params)(struct se_hba *,
#define SE_INQUIRY_BUF 512
#define SE_MODE_PAGE_BUF 512
+#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
/*
* Cross CPU call to disable a performance event
*/
-static int __perf_event_disable(void *info)
+int __perf_event_disable(void *info)
{
struct perf_event *event = info;
struct perf_event_context *ctx = event->ctx;
/*
* Called when the last reference to the file is gone.
*/
-static int perf_release(struct inode *inode, struct file *file)
+static void put_event(struct perf_event *event)
{
- struct perf_event *event = file->private_data;
struct task_struct *owner;
- file->private_data = NULL;
+ if (!atomic_long_dec_and_test(&event->refcount))
+ return;
rcu_read_lock();
owner = ACCESS_ONCE(event->owner);
put_task_struct(owner);
}
- return perf_event_release_kernel(event);
+ perf_event_release_kernel(event);
+}
+
+static int perf_release(struct inode *inode, struct file *file)
+{
+ put_event(file->private_data);
+ return 0;
}
u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
static const struct file_operations perf_fops;
-static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+static struct file *perf_fget_light(int fd, int *fput_needed)
{
struct file *file;
return ERR_PTR(-EBADF);
}
- return file->private_data;
+ return file;
}
static int perf_event_set_output(struct perf_event *event,
case PERF_EVENT_IOC_SET_OUTPUT:
{
+ struct file *output_file = NULL;
struct perf_event *output_event = NULL;
int fput_needed = 0;
int ret;
if (arg != -1) {
- output_event = perf_fget_light(arg, &fput_needed);
- if (IS_ERR(output_event))
- return PTR_ERR(output_event);
+ output_file = perf_fget_light(arg, &fput_needed);
+ if (IS_ERR(output_file))
+ return PTR_ERR(output_file);
+ output_event = output_file->private_data;
}
ret = perf_event_set_output(event, output_event);
if (output_event)
- fput_light(output_event->filp, fput_needed);
+ fput_light(output_file, fput_needed);
return ret;
}
mutex_init(&event->mmap_mutex);
+ atomic_long_set(&event->refcount, 1);
event->cpu = cpu;
event->attr = *attr;
event->group_leader = group_leader;
return event_fd;
if (group_fd != -1) {
- group_leader = perf_fget_light(group_fd, &fput_needed);
- if (IS_ERR(group_leader)) {
- err = PTR_ERR(group_leader);
+ group_file = perf_fget_light(group_fd, &fput_needed);
+ if (IS_ERR(group_file)) {
+ err = PTR_ERR(group_file);
goto err_fd;
}
- group_file = group_leader->filp;
+ group_leader = group_file->private_data;
if (flags & PERF_FLAG_FD_OUTPUT)
output_event = group_leader;
if (flags & PERF_FLAG_FD_NO_GROUP)
put_ctx(gctx);
}
- event->filp = event_file;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
goto err_free;
}
- event->filp = NULL;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
perf_install_in_context(ctx, event, cpu);
* Release the parent event, if this was the last
* reference to it.
*/
- fput(parent_event->filp);
+ put_event(parent_event);
}
static void
*
* __perf_event_exit_task()
* sync_child_event()
- * fput(parent_event->filp)
- * perf_release()
- * mutex_lock(&ctx->mutex)
+ * put_event()
+ * mutex_lock(&ctx->mutex)
*
* But since its the parent context it won't be the same instance.
*/
list_del_init(&event->child_list);
mutex_unlock(&parent->child_mutex);
- fput(parent->filp);
+ put_event(parent);
perf_group_detach(event);
list_del_event(event, ctx);
NULL, NULL);
if (IS_ERR(child_event))
return child_event;
+
+ if (!atomic_long_inc_not_zero(&parent_event->refcount)) {
+ free_event(child_event);
+ return NULL;
+ }
+
get_ctx(child_ctx);
/*
add_event_to_ctx(child_event, child_ctx);
raw_spin_unlock_irqrestore(&child_ctx->lock, flags);
- /*
- * Get a reference to the parent filp - we will fput it
- * when the child event exits. This is safe to do because
- * we are in the parent and we know that the filp still
- * exists and has a nonzero count:
- */
- atomic_long_inc(&parent_event->filp->f_count);
-
/*
* Link this into the parent event's child list
*/
int old_type = bp->attr.bp_type;
int err = 0;
- perf_event_disable(bp);
+ /*
+ * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it
+ * will not be possible to raise IPIs that invoke __perf_event_disable.
+ * So call the function directly after making sure we are targeting the
+ * current task.
+ */
+ if (irqs_disabled() && bp->ctx && bp->ctx->task == current)
+ __perf_event_disable(bp);
+ else
+ perf_event_disable(bp);
bp->attr.bp_addr = attr->bp_addr;
bp->attr.bp_type = attr->bp_type;
}
/*
- * While a dead CPU has no uninterruptible tasks queued at this point,
- * it might still have a nonzero ->nr_uninterruptible counter, because
- * for performance reasons the counter is not stricly tracking tasks to
- * their home CPUs. So we just add the counter to another CPU's counter,
- * to keep the global sum constant after CPU-down:
- */
-static void migrate_nr_uninterruptible(struct rq *rq_src)
-{
- struct rq *rq_dest = cpu_rq(cpumask_any(cpu_active_mask));
-
- rq_dest->nr_uninterruptible += rq_src->nr_uninterruptible;
- rq_src->nr_uninterruptible = 0;
-}
-
-/*
- * remove the tasks which were accounted by rq from calc_load_tasks.
+ * Since this CPU is going 'away' for a while, fold any nr_active delta
+ * we might have. Assumes we're called after migrate_tasks() so that the
+ * nr_active count is stable.
+ *
+ * Also see the comment "Global load-average calculations".
*/
-static void calc_global_load_remove(struct rq *rq)
+static void calc_load_migrate(struct rq *rq)
{
- atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
- rq->calc_load_active = 0;
+ long delta = calc_load_fold_active(rq);
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
}
/*
*/
rq->stop = NULL;
- /* Ensure any throttled groups are reachable by pick_next_task */
- unthrottle_offline_cfs_rqs(rq);
-
for ( ; ; ) {
/*
* There's this thread running, bail when that's the only
BUG_ON(rq->nr_running != 1); /* the migration thread */
raw_spin_unlock_irqrestore(&rq->lock, flags);
- migrate_nr_uninterruptible(rq);
- calc_global_load_remove(rq);
+ calc_load_migrate(rq);
break;
#endif
}
* SD_SHARE_PKG_RESOURCE set (Last Level Cache Domain) for this
* allows us to avoid some pointer chasing select_idle_sibling().
*
- * Iterate domains and sched_groups downward, assigning CPUs to be
- * select_idle_sibling() hw buddy. Cross-wiring hw makes bouncing
- * due to random perturbation self canceling, ie sw buddies pull
- * their counterpart to their CPU's hw counterpart.
- *
* Also keep a unique ID per domain (we use the first cpu number in
* the cpumask of the domain), this allows us to quickly tell if
* two cpus are in the same cache domain, see cpus_share_cache().
int id = cpu;
sd = highest_flag_domain(cpu, SD_SHARE_PKG_RESOURCES);
- if (sd) {
- struct sched_domain *tmp = sd;
- struct sched_group *sg, *prev;
- bool right;
-
- /*
- * Traverse to first CPU in group, and count hops
- * to cpu from there, switching direction on each
- * hop, never ever pointing the last CPU rightward.
- */
- do {
- id = cpumask_first(sched_domain_span(tmp));
- prev = sg = tmp->groups;
- right = 1;
-
- while (cpumask_first(sched_group_cpus(sg)) != id)
- sg = sg->next;
-
- while (!cpumask_test_cpu(cpu, sched_group_cpus(sg))) {
- prev = sg;
- sg = sg->next;
- right = !right;
- }
-
- /* A CPU went down, never point back to domain start. */
- if (right && cpumask_first(sched_group_cpus(sg->next)) == id)
- right = false;
-
- sg = right ? sg->next : prev;
- tmp->idle_buddy = cpumask_first(sched_group_cpus(sg));
- } while ((tmp = tmp->child));
-
+ if (sd)
id = cpumask_first(sched_domain_span(sd));
- }
rcu_assign_pointer(per_cpu(sd_llc, cpu), sd);
per_cpu(sd_llc_id, cpu) = id;
hrtimer_cancel(&cfs_b->slack_timer);
}
-void unthrottle_offline_cfs_rqs(struct rq *rq)
+static void unthrottle_offline_cfs_rqs(struct rq *rq)
{
struct cfs_rq *cfs_rq;
return NULL;
}
static inline void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) {}
-void unthrottle_offline_cfs_rqs(struct rq *rq) {}
+static inline void unthrottle_offline_cfs_rqs(struct rq *rq) {}
#endif /* CONFIG_CFS_BANDWIDTH */
int cpu = smp_processor_id();
int prev_cpu = task_cpu(p);
struct sched_domain *sd;
+ struct sched_group *sg;
+ int i;
/*
* If the task is going to be woken-up on this cpu and if it is
return prev_cpu;
/*
- * Otherwise, check assigned siblings to find an elegible idle cpu.
+ * Otherwise, iterate the domains and find an elegible idle cpu.
*/
sd = rcu_dereference(per_cpu(sd_llc, target));
-
for_each_lower_domain(sd) {
- if (!cpumask_test_cpu(sd->idle_buddy, tsk_cpus_allowed(p)))
- continue;
- if (idle_cpu(sd->idle_buddy))
- return sd->idle_buddy;
- }
+ sg = sd->groups;
+ do {
+ if (!cpumask_intersects(sched_group_cpus(sg),
+ tsk_cpus_allowed(p)))
+ goto next;
+ for_each_cpu(i, sched_group_cpus(sg)) {
+ if (!idle_cpu(i))
+ goto next;
+ }
+
+ target = cpumask_first_and(sched_group_cpus(sg),
+ tsk_cpus_allowed(p));
+ goto done;
+next:
+ sg = sg->next;
+ } while (sg != sd->groups);
+ }
+done:
return target;
}
* @group: sched_group whose statistics are to be updated.
* @load_idx: Load index of sched_domain of this_cpu for load calc.
* @local_group: Does group contain this_cpu.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sgs: variable to hold the statistics for this group.
*/
/**
* update_sd_lb_stats - Update sched_domain's statistics for load balancing.
* @env: The load balancing environment.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sds: variable to hold the statistics for this sched_domain.
*/
static void rq_offline_fair(struct rq *rq)
{
update_sysctl();
+
+ /* Ensure any throttled groups are reachable by pick_next_task */
+ unthrottle_offline_cfs_rqs(rq);
}
#endif /* CONFIG_SMP */
* runtime - in which case borrowing doesn't make sense.
*/
rt_rq->rt_runtime = RUNTIME_INF;
+ rt_rq->rt_throttled = 0;
raw_spin_unlock(&rt_rq->rt_runtime_lock);
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
-extern void unthrottle_offline_cfs_rqs(struct rq *rq);
extern void account_cfs_bandwidth_used(int enabled, int was_enabled);
tick_do_update_jiffies64(now);
update_cpu_load_nohz();
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
/* pool flags */
POOL_MANAGE_WORKERS = 1 << 0, /* need to manage workers */
+ POOL_MANAGING_WORKERS = 1 << 1, /* managing workers */
/* worker flags */
WORKER_STARTED = 1 << 0, /* started */
/* Do we have too many workers and should some go away? */
static bool too_many_workers(struct worker_pool *pool)
{
- bool managing = mutex_is_locked(&pool->manager_mutex);
+ bool managing = pool->flags & POOL_MANAGING_WORKERS;
int nr_idle = pool->nr_idle + managing; /* manager is considered idle */
int nr_busy = pool->nr_workers - nr_idle;
/* we did our part, wait for rebind_workers() to finish up */
wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND));
+
+ /*
+ * rebind_workers() shouldn't finish until all workers passed the
+ * above WORKER_REBIND wait. Tell it when done.
+ */
+ spin_lock_irq(&worker->pool->gcwq->lock);
+ if (!--worker->idle_rebind->cnt)
+ complete(&worker->idle_rebind->done);
+ spin_unlock_irq(&worker->pool->gcwq->lock);
}
/*
/* set REBIND and kick idle ones, we'll wait for these later */
for_each_worker_pool(pool, gcwq) {
list_for_each_entry(worker, &pool->idle_list, entry) {
+ unsigned long worker_flags = worker->flags;
+
if (worker->flags & WORKER_REBIND)
continue;
- /* morph UNBOUND to REBIND */
- worker->flags &= ~WORKER_UNBOUND;
- worker->flags |= WORKER_REBIND;
+ /* morph UNBOUND to REBIND atomically */
+ worker_flags &= ~WORKER_UNBOUND;
+ worker_flags |= WORKER_REBIND;
+ ACCESS_ONCE(worker->flags) = worker_flags;
idle_rebind.cnt++;
worker->idle_rebind = &idle_rebind;
goto retry;
}
- /*
- * All idle workers are rebound and waiting for %WORKER_REBIND to
- * be cleared inside idle_worker_rebind(). Clear and release.
- * Clearing %WORKER_REBIND from this foreign context is safe
- * because these workers are still guaranteed to be idle.
- */
- for_each_worker_pool(pool, gcwq)
- list_for_each_entry(worker, &pool->idle_list, entry)
- worker->flags &= ~WORKER_REBIND;
-
- wake_up_all(&gcwq->rebind_hold);
-
- /* rebind busy workers */
+ /* all idle workers are rebound, rebind busy workers */
for_each_busy_worker(worker, i, pos, gcwq) {
struct work_struct *rebind_work = &worker->rebind_work;
+ unsigned long worker_flags = worker->flags;
- /* morph UNBOUND to REBIND */
- worker->flags &= ~WORKER_UNBOUND;
- worker->flags |= WORKER_REBIND;
+ /* morph UNBOUND to REBIND atomically */
+ worker_flags &= ~WORKER_UNBOUND;
+ worker_flags |= WORKER_REBIND;
+ ACCESS_ONCE(worker->flags) = worker_flags;
if (test_and_set_bit(WORK_STRUCT_PENDING_BIT,
work_data_bits(rebind_work)))
worker->scheduled.next,
work_color_to_flags(WORK_NO_COLOR));
}
+
+ /*
+ * All idle workers are rebound and waiting for %WORKER_REBIND to
+ * be cleared inside idle_worker_rebind(). Clear and release.
+ * Clearing %WORKER_REBIND from this foreign context is safe
+ * because these workers are still guaranteed to be idle.
+ *
+ * We need to make sure all idle workers passed WORKER_REBIND wait
+ * in idle_worker_rebind() before returning; otherwise, workers can
+ * get stuck at the wait if hotplug cycle repeats.
+ */
+ idle_rebind.cnt = 1;
+ INIT_COMPLETION(idle_rebind.done);
+
+ for_each_worker_pool(pool, gcwq) {
+ list_for_each_entry(worker, &pool->idle_list, entry) {
+ worker->flags &= ~WORKER_REBIND;
+ idle_rebind.cnt++;
+ }
+ }
+
+ wake_up_all(&gcwq->rebind_hold);
+
+ if (--idle_rebind.cnt) {
+ spin_unlock_irq(&gcwq->lock);
+ wait_for_completion(&idle_rebind.done);
+ spin_lock_irq(&gcwq->lock);
+ }
}
static struct worker *alloc_worker(void)
struct worker_pool *pool = worker->pool;
bool ret = false;
- if (!mutex_trylock(&pool->manager_mutex))
+ if (pool->flags & POOL_MANAGING_WORKERS)
return ret;
+ pool->flags |= POOL_MANAGING_WORKERS;
+
+ /*
+ * To simplify both worker management and CPU hotplug, hold off
+ * management while hotplug is in progress. CPU hotplug path can't
+ * grab %POOL_MANAGING_WORKERS to achieve this because that can
+ * lead to idle worker depletion (all become busy thinking someone
+ * else is managing) which in turn can result in deadlock under
+ * extreme circumstances. Use @pool->manager_mutex to synchronize
+ * manager against CPU hotplug.
+ *
+ * manager_mutex would always be free unless CPU hotplug is in
+ * progress. trylock first without dropping @gcwq->lock.
+ */
+ if (unlikely(!mutex_trylock(&pool->manager_mutex))) {
+ spin_unlock_irq(&pool->gcwq->lock);
+ mutex_lock(&pool->manager_mutex);
+ /*
+ * CPU hotplug could have happened while we were waiting
+ * for manager_mutex. Hotplug itself can't handle us
+ * because manager isn't either on idle or busy list, and
+ * @gcwq's state and ours could have deviated.
+ *
+ * As hotplug is now excluded via manager_mutex, we can
+ * simply try to bind. It will succeed or fail depending
+ * on @gcwq's current state. Try it and adjust
+ * %WORKER_UNBOUND accordingly.
+ */
+ if (worker_maybe_bind_and_lock(worker))
+ worker->flags &= ~WORKER_UNBOUND;
+ else
+ worker->flags |= WORKER_UNBOUND;
+
+ ret = true;
+ }
+
pool->flags &= ~POOL_MANAGE_WORKERS;
/*
ret |= maybe_destroy_workers(pool);
ret |= maybe_create_worker(pool);
+ pool->flags &= ~POOL_MANAGING_WORKERS;
mutex_unlock(&pool->manager_mutex);
return ret;
}
memcpy(out1 + head, p, l);
err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len);
+ if (err)
+ goto err;
- if (!err && len == hlen)
- err = memcmp(out2, h, hlen);
+ if (len != hlen || memcmp(out2, h, hlen))
+ err = -EINVAL;
err:
mpi_free(in);
min(new_area_start, memblock.current_limit),
new_alloc_size, PAGE_SIZE);
- new_array = addr ? __va(addr) : 0;
+ new_array = addr ? __va(addr) : NULL;
}
if (!addr) {
pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/a2mp.h>
+#include <net/bluetooth/smp.h>
static void hci_le_connect(struct hci_conn *conn)
{
{
BT_DBG("hcon %p", conn);
+ if (conn->type == LE_LINK)
+ return smp_conn_security(conn, sec_level);
+
/* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
+ struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
- if (!conn->hcon->out && conn->hcon->type == LE_LINK)
+ if (!hcon->out && hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- if (conn->hcon->out && conn->hcon->type == LE_LINK)
- smp_conn_security(conn, conn->hcon->pending_sec_level);
+ if (hcon->out && hcon->type == LE_LINK)
+ smp_conn_security(hcon, hcon->pending_sec_level);
mutex_lock(&conn->chan_lock);
continue;
}
- if (conn->hcon->type == LE_LINK) {
- if (smp_conn_security(conn, chan->sec_level))
+ if (hcon->type == LE_LINK) {
+ if (smp_conn_security(hcon, chan->sec_level))
l2cap_chan_ready(chan);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
break;
}
- if (smp_conn_security(conn, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level))
break;
sk->sk_state = BT_CONFIG;
chan->state = BT_CONFIG;
if (err < 0)
goto free;
- dev->tty_dev = tty_register_device(rfcomm_tty_driver, dev->id, NULL);
-
+ dev->tty_dev = tty_port_register_device(&dev->port, rfcomm_tty_driver,
+ dev->id, NULL);
if (IS_ERR(dev->tty_dev)) {
err = PTR_ERR(dev->tty_dev);
list_del(&dev->list);
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->wait, &wait);
static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- struct ktermios *new = tty->termios;
+ struct ktermios *new = &tty->termios;
int old_baud_rate = tty_termios_baud_rate(old);
int new_baud_rate = tty_termios_baud_rate(new);
mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
hcon->dst_type, reason);
- if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
- cancel_delayed_work_sync(&conn->security_timer);
+ cancel_delayed_work_sync(&conn->security_timer);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags))
smp_chan_destroy(conn);
- }
}
#define JUST_WORKS 0x00
return 0;
}
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
{
- struct hci_conn *hcon = conn->hcon;
+ struct l2cap_conn *conn = hcon->l2cap_data;
struct smp_chan *smp = conn->smp_chan;
__u8 authreq;
unsigned int bitmask;
spin_lock_bh(&ebt_log_lock);
- printk("<%c>%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
+ printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
'0' + loginfo->u.log.level, prefix,
in ? in->name : "", out ? out->name : "",
eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
void (*put)(struct cflayer *lyr))
{
struct cfsrvl *service;
- service = container_of(adapt_layer->dn, struct cfsrvl, layer);
- WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL);
+ if (WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL))
+ return;
+ service = container_of(adapt_layer->dn, struct cfsrvl, layer);
service->hold = hold;
service->put = put;
}
if (!skb_flow_dissect(skb, &keys))
return;
- if (keys.ports) {
- if ((__force u16)keys.port16[1] < (__force u16)keys.port16[0])
- swap(keys.port16[0], keys.port16[1]);
+ if (keys.ports)
skb->l4_rxhash = 1;
- }
/* get a consistent hash (same value on both flow directions) */
- if ((__force u32)keys.dst < (__force u32)keys.src)
+ if (((__force u32)keys.dst < (__force u32)keys.src) ||
+ (((__force u32)keys.dst == (__force u32)keys.src) &&
+ ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) {
swap(keys.dst, keys.src);
+ swap(keys.port16[0], keys.port16[1]);
+ }
hash = jhash_3words((__force u32)keys.dst,
(__force u32)keys.src,
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 -
pkt_dev->pkt_overhead;
- if (datalen < sizeof(struct pktgen_hdr))
+ if (datalen < 0 || datalen < sizeof(struct pktgen_hdr))
datalen = sizeof(struct pktgen_hdr);
udph->source = htons(pkt_dev->cur_udp_src);
void sock_edemux(struct sk_buff *skb)
{
- sock_put(skb->sk);
+ struct sock *sk = skb->sk;
+
+#ifdef CONFIG_INET
+ if (sk->sk_state == TCP_TIME_WAIT)
+ inet_twsk_put(inet_twsk(sk));
+ else
+#endif
+ sock_put(sk);
}
EXPORT_SYMBOL(sock_edemux);
if (unlikely(err)) {
trace_kfree_skb(skb, udp_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS, is_udplite);
+ }
goto out_free;
}
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
- else
- set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags);
+ else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
+ &tp->tsq_flags))
+ sock_hold(sk);
goto out;
}
}
if (unlikely(err)) {
trace_kfree_skb(skb, udpv6_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ if (is_udp4)
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ }
goto out_free;
}
if (!peeked) {
*/
int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
{
- struct tty_struct *tty;
unsigned long flags;
struct sk_buff *skb;
int count;
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
- tty = self->tty;
- if (!tty)
- return 0;
-
/* Make sure we don't send parameters for raw mode */
if (self->service_type == IRCOMM_3_WIRE_RAW)
return 0;
#include <net/irda/ircomm_tty_attach.h>
#include <net/irda/ircomm_tty.h>
+static int ircomm_tty_install(struct tty_driver *driver,
+ struct tty_struct *tty);
static int ircomm_tty_open(struct tty_struct *tty, struct file *filp);
static void ircomm_tty_close(struct tty_struct * tty, struct file *filp);
static int ircomm_tty_write(struct tty_struct * tty,
static hashbin_t *ircomm_tty = NULL;
static const struct tty_operations ops = {
+ .install = ircomm_tty_install,
.open = ircomm_tty_open,
.close = ircomm_tty_close,
.write = ircomm_tty_write,
#endif /* CONFIG_PROC_FS */
};
+static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ /*
+ * Here, we use to lock those two guys, but as ircomm_param_request()
+ * does it itself, I don't see the point (and I see the deadlock).
+ * Jean II
+ */
+ if (raise)
+ self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR;
+ else
+ self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR);
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+}
+
+static int ircomm_port_carrier_raised(struct tty_port *port)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ return self->settings.dce & IRCOMM_CD;
+}
+
+static const struct tty_port_operations ircomm_port_ops = {
+ .dtr_rts = ircomm_port_raise_dtr_rts,
+ .carrier_raised = ircomm_port_carrier_raised,
+};
+
/*
* Function ircomm_tty_init()
*
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
/* Check if already open */
- if (test_and_set_bit(ASYNC_B_INITIALIZED, &self->flags)) {
+ if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) {
IRDA_DEBUG(2, "%s(), already open so break out!\n", __func__ );
return 0;
}
return 0;
err:
- clear_bit(ASYNC_B_INITIALIZED, &self->flags);
+ clear_bit(ASYNCB_INITIALIZED, &self->port.flags);
return ret;
}
*
*/
static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
- struct file *filp)
+ struct tty_struct *tty, struct file *filp)
{
+ struct tty_port *port = &self->port;
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0, extra_count = 0;
unsigned long flags;
- struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
- tty = self->tty;
-
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- self->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ );
return 0;
}
- if (tty->termios->c_cflag & CLOCAL) {
+ if (tty->termios.c_cflag & CLOCAL) {
IRDA_DEBUG(1, "%s(), doing CLOCAL!\n", __func__ );
do_clocal = 1;
}
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, self->open_count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&self->open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count );
+ __FILE__, __LINE__, tty->driver->name, port->count);
- /* As far as I can see, we protect open_count - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = 1;
- self->open_count--;
+ port->count--;
}
- spin_unlock_irqrestore(&self->spinlock, flags);
- self->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
+ port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD) {
- /* Here, we use to lock those two guys, but
- * as ircomm_param_request() does it itself,
- * I don't see the point (and I see the deadlock).
- * Jean II */
- self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR;
-
- ircomm_param_request(self, IRCOMM_DTE, TRUE);
- }
+ if (tty->termios.c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
- !test_bit(ASYNC_B_INITIALIZED, &self->flags)) {
- retval = (self->flags & ASYNC_HUP_NOTIFY) ?
+ !test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
* specified, we cannot return before the IrCOMM link is
* ready
*/
- if (!test_bit(ASYNC_B_CLOSING, &self->flags) &&
- (do_clocal || (self->settings.dce & IRCOMM_CD)) &&
+ if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
+ (do_clocal || tty_port_carrier_raised(port)) &&
self->state == IRCOMM_TTY_READY)
{
break;
}
IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count );
+ __FILE__, __LINE__, tty->driver->name, port->count);
schedule();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&self->open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count) {
/* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->open_count++;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->count++;
+ spin_unlock_irqrestore(&port->lock, flags);
}
- self->blocked_open--;
+ port->blocked_open--;
IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count);
+ __FILE__, __LINE__, tty->driver->name, port->count);
if (!retval)
- self->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return retval;
}
-/*
- * Function ircomm_tty_open (tty, filp)
- *
- * This routine is called when a particular tty device is opened. This
- * routine is mandatory; if this routine is not filled in, the attempted
- * open will fail with ENODEV.
- */
-static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+
+static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct ircomm_tty_cb *self;
unsigned int line = tty->index;
- unsigned long flags;
- int ret;
-
- IRDA_DEBUG(2, "%s()\n", __func__ );
/* Check if instance already exists */
self = hashbin_lock_find(ircomm_tty, line, NULL);
return -ENOMEM;
}
+ tty_port_init(&self->port);
+ self->port.ops = &ircomm_port_ops;
self->magic = IRCOMM_TTY_MAGIC;
self->flow = FLOW_STOP;
INIT_WORK(&self->tqueue, ircomm_tty_do_softint);
self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED;
self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED;
- self->close_delay = 5*HZ/10;
- self->closing_wait = 30*HZ;
/* Init some important stuff */
init_timer(&self->watchdog_timer);
- init_waitqueue_head(&self->open_wait);
- init_waitqueue_head(&self->close_wait);
spin_lock_init(&self->spinlock);
/*
*
* Note this is completely usafe and doesn't work properly
*/
- tty->termios->c_iflag = 0;
- tty->termios->c_oflag = 0;
+ tty->termios.c_iflag = 0;
+ tty->termios.c_oflag = 0;
/* Insert into hash */
hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
}
- /* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->open_count++;
- tty->driver_data = self;
- self->tty = tty;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ return tty_port_install(&self->port, driver, tty);
+}
+
+/*
+ * Function ircomm_tty_open (tty, filp)
+ *
+ * This routine is called when a particular tty device is opened. This
+ * routine is mandatory; if this routine is not filled in, the attempted
+ * open will fail with ENODEV.
+ */
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct ircomm_tty_cb *self = tty->driver_data;
+ unsigned long flags;
+ int ret;
+
+ IRDA_DEBUG(2, "%s()\n", __func__ );
+
+ /* ++ is not atomic, so this should be protected - Jean II */
+ spin_lock_irqsave(&self->port.lock, flags);
+ self->port.count++;
+ spin_unlock_irqrestore(&self->port.lock, flags);
+ tty_port_tty_set(&self->port, tty);
IRDA_DEBUG(1, "%s(), %s%d, count = %d\n", __func__ , tty->driver->name,
- self->line, self->open_count);
+ self->line, self->port.count);
/* Not really used by us, but lets do it anyway */
- self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
/*
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
- test_bit(ASYNC_B_CLOSING, &self->flags)) {
+ test_bit(ASYNCB_CLOSING, &self->port.flags)) {
/* Hm, why are we blocking on ASYNC_CLOSING if we
* do return -EAGAIN/-ERESTARTSYS below anyway?
* probably better sleep uninterruptible?
*/
- if (wait_event_interruptible(self->close_wait, !test_bit(ASYNC_B_CLOSING, &self->flags))) {
+ if (wait_event_interruptible(self->port.close_wait,
+ !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
IRDA_WARNING("%s - got signal while blocking on ASYNC_CLOSING!\n",
__func__);
return -ERESTARTSYS;
}
#ifdef SERIAL_DO_RESTART
- return (self->flags & ASYNC_HUP_NOTIFY) ?
+ return (self->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
#else
return -EAGAIN;
}
/* Check if this is a "normal" ircomm device, or an irlpt device */
- if (line < 0x10) {
+ if (self->line < 0x10) {
self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */
/* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */
if (ret)
return ret;
- ret = ircomm_tty_block_til_ready(self, filp);
+ ret = ircomm_tty_block_til_ready(self, tty, filp);
if (ret) {
IRDA_DEBUG(2,
"%s(), returning after block_til_ready with %d\n", __func__ ,
static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
- unsigned long flags;
+ struct tty_port *port = &self->port;
IRDA_DEBUG(0, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- spin_lock_irqsave(&self->spinlock, flags);
-
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- IRDA_DEBUG(0, "%s(), returning 1\n", __func__ );
- return;
- }
-
- if ((tty->count == 1) && (self->open_count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. state->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- IRDA_DEBUG(0, "%s(), bad serial port count; "
- "tty->count is 1, state->count is %d\n", __func__ ,
- self->open_count);
- self->open_count = 1;
- }
-
- if (--self->open_count < 0) {
- IRDA_ERROR("%s(), bad serial port count for ttys%d: %d\n",
- __func__, self->line, self->open_count);
- self->open_count = 0;
- }
- if (self->open_count) {
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- IRDA_DEBUG(0, "%s(), open count > 0\n", __func__ );
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
-
- /* Hum... Should be test_and_set_bit ??? - Jean II */
- set_bit(ASYNC_B_CLOSING, &self->flags);
-
- /* We need to unlock here (we were unlocking at the end of this
- * function), because tty_wait_until_sent() may schedule.
- * I don't know if the rest should be protected somehow,
- * so someone should check. - Jean II */
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent_from_close(tty, self->closing_wait);
ircomm_tty_shutdown(self);
tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- self->tty = NULL;
- if (self->blocked_open) {
- if (self->close_delay)
- schedule_timeout_interruptible(self->close_delay);
- wake_up_interruptible(&self->open_wait);
- }
-
- self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&self->close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*
if (!self || self->magic != IRCOMM_TTY_MAGIC)
return;
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
if (!tty)
return;
}
if (tty->hw_stopped)
- return;
+ goto put;
/* Unlink transmit buffer */
spin_lock_irqsave(&self->spinlock, flags);
/* Check if user (still) wants to be waken up */
tty_wakeup(tty);
+put:
+ tty_kref_put(tty);
}
/*
ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
/* Hardware flow control? */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
self->settings.dte &= ~IRCOMM_RTS;
self->settings.dte |= IRCOMM_DELTA_RTS;
}
/* Using hardware flow control? */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
ircomm_param_request(self, IRCOMM_DTE, TRUE);
IRDA_DEBUG(0, "%s()\n", __func__ );
- if (!test_and_clear_bit(ASYNC_B_INITIALIZED, &self->flags))
+ if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags))
return;
ircomm_tty_detach_cable(self);
static void ircomm_tty_hangup(struct tty_struct *tty)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ struct tty_port *port = &self->port;
unsigned long flags;
IRDA_DEBUG(0, "%s()\n", __func__ );
/* ircomm_tty_flush_buffer(tty); */
ircomm_tty_shutdown(self);
- /* I guess we need to lock here - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->flags &= ~ASYNC_NORMAL_ACTIVE;
- self->tty = NULL;
- self->open_count = 0;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
+ if (port->tty) {
+ set_bit(TTY_IO_ERROR, &port->tty->flags);
+ tty_kref_put(port->tty);
+ }
+ port->tty = NULL;
+ port->count = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&port->open_wait);
}
/*
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
status = self->settings.dce;
if (status & IRCOMM_DCE_DELTA_ANY) {
/*wake_up_interruptible(&self->delta_msr_wait);*/
}
- if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
+ if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
IRDA_DEBUG(2,
"%s(), ircomm%d CD now %s...\n", __func__ , self->line,
(status & IRCOMM_CD) ? "on" : "off");
if (status & IRCOMM_CD) {
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
} else {
IRDA_DEBUG(2,
"%s(), Doing serial hangup..\n", __func__ );
tty_hangup(tty);
/* Hangup will remote the tty, so better break out */
- return;
+ goto put;
}
}
- if (self->flags & ASYNC_CTS_FLOW) {
+ if (tty && tty_port_cts_enabled(&self->port)) {
if (tty->hw_stopped) {
if (status & IRCOMM_CTS) {
IRDA_DEBUG(2,
tty->hw_stopped = 0;
/* Wake up processes blocked on open */
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
schedule_work(&self->tqueue);
- return;
+ goto put;
}
} else {
if (!(status & IRCOMM_CTS)) {
}
}
}
+put:
+ tty_kref_put(tty);
}
/*
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
IRDA_ASSERT(skb != NULL, return -1;);
- if (!self->tty) {
+ tty = tty_port_tty_get(&self->port);
+ if (!tty) {
IRDA_DEBUG(0, "%s(), no tty!\n", __func__ );
return 0;
}
* Devices like WinCE can do this, and since they don't send any
* params, we can just as well declare the hardware for running.
*/
- if (self->tty->hw_stopped && (self->flow == FLOW_START)) {
+ if (tty->hw_stopped && (self->flow == FLOW_START)) {
IRDA_DEBUG(0, "%s(), polling for line settings!\n", __func__ );
ircomm_param_request(self, IRCOMM_POLL, TRUE);
* Use flip buffer functions since the code may be called from interrupt
* context
*/
- tty_insert_flip_string(self->tty, skb->data, skb->len);
- tty_flip_buffer_push(self->tty);
+ tty_insert_flip_string(tty, skb->data, skb->len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
/* No need to kfree_skb - see ircomm_ttp_data_indication() */
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
switch (cmd) {
case FLOW_START:
IRDA_DEBUG(2, "%s(), hw start!\n", __func__ );
- tty->hw_stopped = 0;
+ if (tty)
+ tty->hw_stopped = 0;
/* ircomm_tty_do_softint will take care of the rest */
schedule_work(&self->tqueue);
default: /* If we get here, something is very wrong, better stop */
case FLOW_STOP:
IRDA_DEBUG(2, "%s(), hw stopped!\n", __func__ );
- tty->hw_stopped = 1;
+ if (tty)
+ tty->hw_stopped = 1;
break;
}
+
+ tty_kref_put(tty);
self->flow = cmd;
}
#ifdef CONFIG_PROC_FS
static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
{
+ struct tty_struct *tty;
char sep;
seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]);
seq_puts(m, "Flags:");
sep = ' ';
- if (self->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&self->port)) {
seq_printf(m, "%cASYNC_CTS_FLOW", sep);
sep = '|';
}
- if (self->flags & ASYNC_CHECK_CD) {
+ if (self->port.flags & ASYNC_CHECK_CD) {
seq_printf(m, "%cASYNC_CHECK_CD", sep);
sep = '|';
}
- if (self->flags & ASYNC_INITIALIZED) {
+ if (self->port.flags & ASYNC_INITIALIZED) {
seq_printf(m, "%cASYNC_INITIALIZED", sep);
sep = '|';
}
- if (self->flags & ASYNC_LOW_LATENCY) {
+ if (self->port.flags & ASYNC_LOW_LATENCY) {
seq_printf(m, "%cASYNC_LOW_LATENCY", sep);
sep = '|';
}
- if (self->flags & ASYNC_CLOSING) {
+ if (self->port.flags & ASYNC_CLOSING) {
seq_printf(m, "%cASYNC_CLOSING", sep);
sep = '|';
}
- if (self->flags & ASYNC_NORMAL_ACTIVE) {
+ if (self->port.flags & ASYNC_NORMAL_ACTIVE) {
seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep);
sep = '|';
}
seq_putc(m, '\n');
seq_printf(m, "Role: %s\n", self->client ? "client" : "server");
- seq_printf(m, "Open count: %d\n", self->open_count);
+ seq_printf(m, "Open count: %d\n", self->port.count);
seq_printf(m, "Max data size: %d\n", self->max_data_size);
seq_printf(m, "Max header size: %d\n", self->max_header_size);
- if (self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
seq_printf(m, "Hardware: %s\n",
- self->tty->hw_stopped ? "Stopped" : "Running");
+ tty->hw_stopped ? "Stopped" : "Running");
+ tty_kref_put(tty);
+ }
}
static int ircomm_tty_proc_show(struct seq_file *m, void *v)
*/
int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
{
+ struct tty_struct *tty;
+
IRDA_DEBUG(0, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return -1;);
}
/* Make sure nobody tries to write before the link is up */
- self->tty->hw_stopped = 1;
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
+ tty->hw_stopped = 1;
+ tty_kref_put(tty);
+ }
ircomm_tty_ias_register(self);
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- if (!self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
return;
/* This will stop control data transfers */
self->flow = FLOW_STOP;
/* Stop data transfers */
- self->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL,
NULL);
+ tty_kref_put(tty);
}
/*
*/
void ircomm_tty_link_established(struct ircomm_tty_cb *self)
{
+ struct tty_struct *tty;
+
IRDA_DEBUG(2, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- if (!self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
return;
del_timer(&self->watchdog_timer);
* will have to wait for the peer device (DCE) to raise the CTS
* line.
*/
- if ((self->flags & ASYNC_CTS_FLOW) && ((self->settings.dce & IRCOMM_CTS) == 0)) {
+ if (tty_port_cts_enabled(&self->port) &&
+ ((self->settings.dce & IRCOMM_CTS) == 0)) {
IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __func__ );
- return;
+ goto put;
} else {
IRDA_DEBUG(1, "%s(), starting hardware!\n", __func__ );
- self->tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
/* Wake up processes blocked on open */
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
}
schedule_work(&self->tqueue);
+put:
+ tty_kref_put(tty);
}
/*
ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
ircomm_tty_start_watchdog_timer(self, 3*HZ);
- if (self->flags & ASYNC_CHECK_CD) {
+ if (self->port.flags & ASYNC_CHECK_CD) {
/* Drop carrier */
self->settings.dce = IRCOMM_DELTA_CD;
ircomm_tty_check_modem_status(self);
} else {
+ struct tty_struct *tty = tty_port_tty_get(&self->port);
IRDA_DEBUG(0, "%s(), hanging up!\n", __func__ );
- if (self->tty)
- tty_hangup(self->tty);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
}
break;
default:
* Change speed of the driver. If the remote device is a DCE, then this
* should make it change the speed of its serial port
*/
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+ struct tty_struct *tty)
{
unsigned int cflag, cval;
int baud;
IRDA_DEBUG(2, "%s()\n", __func__ );
- if (!self->tty || !self->tty->termios || !self->ircomm)
+ if (!self->ircomm)
return;
- cflag = self->tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* byte size and parity */
switch (cflag & CSIZE) {
cval |= IRCOMM_PARITY_EVEN;
/* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(self->tty);
+ baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600; /* B0 transition handled in rs_set_termios */
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
- self->flags |= ASYNC_CTS_FLOW;
+ self->port.flags |= ASYNC_CTS_FLOW;
self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
/* This got me. Bummer. Jean II */
if (self->service_type == IRCOMM_3_WIRE_RAW)
IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
} else {
- self->flags &= ~ASYNC_CTS_FLOW;
+ self->port.flags &= ~ASYNC_CTS_FLOW;
self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
}
if (cflag & CLOCAL)
- self->flags &= ~ASYNC_CHECK_CD;
+ self->port.flags &= ~ASYNC_CHECK_CD;
else
- self->flags |= ASYNC_CHECK_CD;
+ self->port.flags |= ASYNC_CHECK_CD;
#if 0
/*
* Set up parity check flag
struct ktermios *old_termios)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
IRDA_DEBUG(2, "%s()\n", __func__ );
if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+ (RELEVANT_IFLAG(tty->termios.c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag)))
{
return;
}
- ircomm_tty_change_speed(self);
+ ircomm_tty_change_speed(self, tty);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
self->settings.dte |= IRCOMM_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
self->settings.dte |= IRCOMM_RTS;
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
+ !(tty->termios.c_cflag & CRTSCTS))
{
tty->hw_stopped = 0;
ircomm_tty_start(tty);
memset(&info, 0, sizeof(info));
info.line = self->line;
- info.flags = self->flags;
+ info.flags = self->port.flags;
info.baud_base = self->settings.data_rate;
- info.close_delay = self->close_delay;
- info.closing_wait = self->closing_wait;
+ info.close_delay = self->port.close_delay;
+ info.closing_wait = self->port.closing_wait;
/* For compatibility */
info.type = PORT_16550A;
return err;
}
+static struct lock_class_key l2tp_socket_class;
+
int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp)
{
struct l2tp_tunnel *tunnel = NULL;
tunnel->old_sk_destruct = sk->sk_destruct;
sk->sk_destruct = &l2tp_tunnel_destruct;
tunnel->sock = sk;
+ lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock");
+
sk->sk_allocation = GFP_ATOMIC;
/* Add tunnel to our list */
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
- if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
+ if (!pskb_may_pull(skb, ETH_HLEN))
goto error;
secpath_reset(skb);
else
memset(next_hop, 0, ETH_ALEN);
+ memset(pinfo, 0, sizeof(*pinfo));
+
pinfo->generation = mesh_paths_generation;
pinfo->filled = MPATH_INFO_FRAME_QLEN |
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
- pinfo->flags = 0;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
- if (mpath->flags & MESH_PATH_RESOLVING)
- pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
-
- pinfo->flags = mpath->flags;
+ if (mpath->flags & MESH_PATH_RESOLVED)
+ pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
goto out_unlock;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->auth_data = NULL;
err_free:
kfree(auth_data);
err = 0;
goto out;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->assoc_data = NULL;
err_free:
kfree(assoc_data);
* sCL -> sSS
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
-/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
+/*synack*/ { sIV, sIV, sSR, sIV, sIV, sIV, sIV, sIV, sIV, sSR },
/*
* sNO -> sIV Too late and no reason to do anything
* sSS -> sIV Client can't send SYN and then SYN/ACK
* sS2 -> sSR SYN/ACK sent to SYN2 in simultaneous open
- * sSR -> sIG
- * sES -> sIG Error: SYNs in window outside the SYN_SENT state
- * are errors. Receiver will reply with RST
- * and close the connection.
- * Or we are not in sync and hold a dead connection.
- * sFW -> sIG
- * sCW -> sIG
- * sLA -> sIG
- * sTW -> sIG
- * sCL -> sIG
+ * sSR -> sSR Late retransmitted SYN/ACK in simultaneous open
+ * sES -> sIV Invalid SYN/ACK packets sent by the client
+ * sFW -> sIV
+ * sCW -> sIV
+ * sLA -> sIV
+ * sTW -> sIV
+ * sCL -> sIV
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
/*fin*/ { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
ack = sack = receiver->td_end;
}
- if (seq == end
- && (!tcph->rst
- || (seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)))
+ if (tcph->rst && seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)
/*
- * Packets contains no data: we assume it is valid
- * and check the ack value only.
- * However RST segments are always validated by their
- * SEQ number, except when seq == 0 (reset sent answering
- * SYN.
+ * RST sent answering SYN.
*/
seq = end = sender->td_end;
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
sk_buff_data_t old_tail = inst->skb->tail;
+ struct sock *sk;
nlh = nlmsg_put(inst->skb, 0, 0,
NFNL_SUBSYS_ULOG << 8 | NFULNL_MSG_PACKET,
}
/* UID */
- if (skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file) {
- struct file *file = skb->sk->sk_socket->file;
+ sk = skb->sk;
+ if (sk && sk->sk_state != TCP_TIME_WAIT) {
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file) {
+ struct file *file = sk->sk_socket->file;
__be32 uid = htonl(file->f_cred->fsuid);
__be32 gid = htonl(file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
if (nla_put_be32(inst->skb, NFULA_UID, uid) ||
nla_put_be32(inst->skb, NFULA_GID, gid))
goto nla_put_failure;
} else
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/* local sequence number */
return 0;
}
+static void dump_sk_uid_gid(struct sbuff *m, struct sock *sk)
+{
+ if (!sk || sk->sk_state == TCP_TIME_WAIT)
+ return;
+
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file)
+ sb_add(m, "UID=%u GID=%u ",
+ sk->sk_socket->file->f_cred->fsuid,
+ sk->sk_socket->file->f_cred->fsgid);
+ read_unlock_bh(&sk->sk_callback_lock);
+}
+
/* One level of recursion won't kill us */
static void dump_ipv4_packet(struct sbuff *m,
const struct nf_loginfo *info,
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && !iphoff && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && !iphoff)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!iphoff && skb->mark)
const struct nf_loginfo *loginfo,
const char *prefix)
{
- sb_add(m, "<%d>%sIN=%s OUT=%s ", loginfo->u.log.level,
- prefix,
+ sb_add(m, KERN_SOH "%c%sIN=%s OUT=%s ",
+ '0' + loginfo->u.log.level, prefix,
in ? in->name : "",
out ? out->name : "");
#ifdef CONFIG_BRIDGE_NETFILTER
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && recurse && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && recurse)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!recurse && skb->mark)
msg->msg_flags |= MSG_TRUNC;
}
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (er < 0) {
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+ return er;
+ }
if (sax != NULL) {
sax->sax25_family = AF_NETROM;
return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
}
-/* remove VLAN header from packet and update csum accrodingly. */
+/* remove VLAN header from packet and update csum accordingly. */
static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
{
struct vlan_hdr *vhdr;
static int validate_tp_port(const struct sw_flow_key *flow_key)
{
if (flow_key->eth.type == htons(ETH_P_IP)) {
- if (flow_key->ipv4.tp.src && flow_key->ipv4.tp.dst)
+ if (flow_key->ipv4.tp.src || flow_key->ipv4.tp.dst)
return 0;
} else if (flow_key->eth.type == htons(ETH_P_IPV6)) {
- if (flow_key->ipv6.tp.src && flow_key->ipv6.tp.dst)
+ if (flow_key->ipv6.tp.src || flow_key->ipv6.tp.dst)
return 0;
}
if (flow_key->eth.type != htons(ETH_P_IP))
return -EINVAL;
- if (!flow_key->ipv4.addr.src || !flow_key->ipv4.addr.dst)
+ if (!flow_key->ip.proto)
return -EINVAL;
ipv4_key = nla_data(ovs_key);
* OVS_KEY_ATTR_PRIORITY 4 -- 4 8
* OVS_KEY_ATTR_IN_PORT 4 -- 4 8
* OVS_KEY_ATTR_ETHERNET 12 -- 4 16
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (outer VLAN ethertype)
* OVS_KEY_ATTR_8021Q 4 -- 4 8
- * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8
+ * OVS_KEY_ATTR_ENCAP 0 -- 4 4 (VLAN encapsulation)
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (inner VLAN ethertype)
* OVS_KEY_ATTR_IPV6 40 -- 4 44
* OVS_KEY_ATTR_ICMPV6 2 2 4 8
* OVS_KEY_ATTR_ND 28 -- 4 32
* -------------------------------------------------
- * total 132
+ * total 144
*/
-#define FLOW_BUFSIZE 132
+#define FLOW_BUFSIZE 144
int ovs_flow_to_nlattrs(const struct sw_flow_key *, struct sk_buff *);
int ovs_flow_from_nlattrs(struct sw_flow_key *swkey, int *key_lenp,
else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
cl = defmap[TC_PRIO_BESTEFFORT];
- if (cl == NULL || cl->level >= head->level)
+ if (cl == NULL)
goto fallback;
}
-
+ if (cl->level >= head->level)
+ goto fallback;
#ifdef CONFIG_NET_CLS_ACT
switch (result) {
case TC_ACT_QUEUED:
if (list_empty(&flow->flowchain)) {
list_add_tail(&flow->flowchain, &q->new_flows);
- codel_vars_init(&flow->cvars);
q->new_flow_count++;
flow->deficit = q->quantum;
flow->dropped = 0;
struct fq_codel_flow *flow = q->flows + i;
INIT_LIST_HEAD(&flow->flowchain);
+ codel_vars_init(&flow->cvars);
}
}
if (sch->limit >= 1)
if (q == NULL)
continue;
- for (n = 0; n < table->DPs; n++)
- if (table->tab[n] && table->tab[n] != q &&
- table->tab[n]->prio == q->prio)
+ for (n = i + 1; n < table->DPs; n++)
+ if (table->tab[n] && table->tab[n]->prio == q->prio)
return 1;
}
struct gred_sched_data *q)
{
table->wred_set.qavg = q->vars.qavg;
+ table->wred_set.qidlestart = q->vars.qidlestart;
}
static inline int gred_use_ecn(struct gred_sched *t)
skb->tc_index = (skb->tc_index & ~GRED_VQ_MASK) | dp;
}
- /* sum up all the qaves of prios <= to ours to get the new qave */
+ /* sum up all the qaves of prios < ours to get the new qave */
if (!gred_wred_mode(t) && gred_rio_mode(t)) {
int i;
} else {
q->backlog -= qdisc_pkt_len(skb);
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
return skb;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return NULL;
}
q->backlog -= len;
q->stats.other++;
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
qdisc_drop(skb, sch);
return len;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return 0;
-
}
static void gred_reset(struct Qdisc *sch)
for (i = 0; i < MAX_DPs; i++) {
struct gred_sched_data *q = table->tab[i];
struct tc_gred_qopt opt;
+ unsigned long qavg;
memset(&opt, 0, sizeof(opt));
if (gred_wred_mode(table))
gred_load_wred_set(table, q);
- opt.qave = red_calc_qavg(&q->parms, &q->vars, q->vars.qavg);
+ qavg = red_calc_qavg(&q->parms, &q->vars,
+ q->vars.qavg >> q->parms.Wlog);
+ opt.qave = qavg >> q->parms.Wlog;
append_opt:
if (nla_append(skb, sizeof(opt), &opt) < 0)
return retval;
}
+static void sctp_packet_release_owner(struct sk_buff *skb)
+{
+ sk_free(skb->sk);
+}
+
+static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sctp_packet_release_owner;
+
+ /*
+ * The data chunks have already been accounted for in sctp_sendmsg(),
+ * therefore only reserve a single byte to keep socket around until
+ * the packet has been transmitted.
+ */
+ atomic_inc(&sk->sk_wmem_alloc);
+}
+
/* All packets are sent to the network through this function from
* sctp_outq_tail().
*
/* Set the owning socket so that we know where to get the
* destination IP address.
*/
- skb_set_owner_w(nskb, sk);
+ sctp_packet_set_owner_w(nskb, sk);
if (!sctp_transport_dst_check(tp)) {
sctp_transport_route(tp, NULL, sctp_sk(sk));
return false;
}
-static void xprt_alloc_slot(struct rpc_task *task)
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
{
- struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req;
+ spin_lock(&xprt->reserve_lock);
if (!list_empty(&xprt->free)) {
req = list_entry(xprt->free.next, struct rpc_rqst, rq_list);
list_del(&req->rq_list);
default:
task->tk_status = -EAGAIN;
}
+ spin_unlock(&xprt->reserve_lock);
return;
out_init_req:
task->tk_status = 0;
task->tk_rqstp = req;
xprt_request_init(task, xprt);
+ spin_unlock(&xprt->reserve_lock);
+}
+EXPORT_SYMBOL_GPL(xprt_alloc_slot);
+
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
+{
+ /* Note: grabbing the xprt_lock_write() ensures that we throttle
+ * new slot allocation if the transport is congested (i.e. when
+ * reconnecting a stream transport or when out of socket write
+ * buffer space).
+ */
+ if (xprt_lock_write(xprt, task)) {
+ xprt_alloc_slot(xprt, task);
+ xprt_release_write(xprt, task);
+ }
}
+EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot);
static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
if (task->tk_rqstp != NULL)
return;
- /* Note: grabbing the xprt_lock_write() here is not strictly needed,
- * but ensures that we throttle new slot allocation if the transport
- * is congested (e.g. if reconnecting or if we're out of socket
- * write buffer space).
- */
task->tk_timeout = 0;
task->tk_status = -EAGAIN;
- if (!xprt_lock_write(xprt, task))
- return;
-
- spin_lock(&xprt->reserve_lock);
- xprt_alloc_slot(task);
- spin_unlock(&xprt->reserve_lock);
- xprt_release_write(xprt, task);
+ xprt->ops->alloc_slot(xprt, task);
}
static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt)
static struct rpc_xprt_ops xprt_rdma_procs = {
.reserve_xprt = xprt_rdma_reserve_xprt,
.release_xprt = xprt_release_xprt_cong, /* sunrpc/xprt.c */
+ .alloc_slot = xprt_alloc_slot,
.release_request = xprt_release_rqst_cong, /* ditto */
.set_retrans_timeout = xprt_set_retrans_timeout_def, /* ditto */
.rpcbind = rpcb_getport_async, /* sunrpc/rpcb_clnt.c */
static struct rpc_xprt_ops xs_local_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = xs_local_rpcbind,
.set_port = xs_local_set_port,
.connect = xs_connect,
.set_buffer_size = xs_udp_set_buffer_size,
.reserve_xprt = xprt_reserve_xprt_cong,
.release_xprt = xprt_release_xprt_cong,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
static struct rpc_xprt_ops xs_tcp_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_lock_and_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
sizeof(connect.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
- if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
+ if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) {
+ kfree(connkeys);
return -EINVAL;
+ }
memcpy(&connect.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(connect.ht_capa));
/* only the first xfrm gets the encap type */
encap_type = 0;
- if (async && x->repl->check(x, skb, seq)) {
+ if (async && x->repl->recheck(x, skb, seq)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
goto drop_unlock;
}
return -EINVAL;
}
+static int xfrm_replay_recheck_esn(struct xfrm_state *x,
+ struct sk_buff *skb, __be32 net_seq)
+{
+ if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi !=
+ htonl(xfrm_replay_seqhi(x, net_seq)))) {
+ x->stats.replay_window++;
+ return -EINVAL;
+ }
+
+ return xfrm_replay_check_esn(x, skb, net_seq);
+}
+
static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
{
unsigned int bitnr, nr, i;
static struct xfrm_replay xfrm_replay_legacy = {
.advance = xfrm_replay_advance,
.check = xfrm_replay_check,
+ .recheck = xfrm_replay_check,
.notify = xfrm_replay_notify,
.overflow = xfrm_replay_overflow,
};
static struct xfrm_replay xfrm_replay_bmp = {
.advance = xfrm_replay_advance_bmp,
.check = xfrm_replay_check_bmp,
+ .recheck = xfrm_replay_check_bmp,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_bmp,
};
static struct xfrm_replay xfrm_replay_esn = {
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
+ .recheck = xfrm_replay_recheck_esn,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_esn,
};
info KSYM ${2}
local kallsymopt;
+ if [ -n "${CONFIG_SYMBOL_PREFIX}" ]; then
+ kallsymopt="${kallsymopt} \
+ --symbol-prefix=${CONFIG_SYMBOL_PREFIX}"
+ fi
+
if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
- kallsymopt=--all-symbols
+ kallsymopt="${kallsymopt} --all-symbols"
fi
local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
int maj = imajor(inode);
int ret;
- if (f->f_flags & O_WRONLY)
+ if ((f->f_flags & O_ACCMODE) == O_WRONLY)
dirn = SND_COMPRESS_PLAYBACK;
- else if (f->f_flags & O_RDONLY)
+ else if ((f->f_flags & O_ACCMODE) == O_RDONLY)
dirn = SND_COMPRESS_CAPTURE;
- else {
- pr_err("invalid direction\n");
+ else
return -EINVAL;
- }
if (maj == snd_major)
compr = snd_lookup_minor_data(iminor(inode),
}
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
+ memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
snd_hda_jack_tbl_clear(codec);
codec->proc_widget_hook = NULL;
codec->spec = NULL;
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
- memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
codec->slave_dig_outs = NULL;
codec->spdif_status_reset = 0;
module_put(codec->owner);
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF),
+ SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
static const char * const slave_pfxs[] = {
"Front", "Surround", "Center", "LFE", "Side",
- "Headphone", "Speaker", "IEC958",
+ "Headphone", "Speaker", "IEC958", "PCM",
NULL
};
}
static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
{
.info = ak4396_dac_vol_info,
.get = ak4396_dac_vol_get,
.put = ak4396_dac_vol_put,
- .tlv = { .p = db_scale_wm_dac },
+ .tlv = { .p = ak4396_db_scale },
},
};
940800,
1411200,
1881600,
- 2882400,
+ 2822400,
3763200,
5644800,
7526400,
.id = MC13783_ID_STEREO_DAC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
.id = MC13783_ID_STEREO_CODEC,
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
.id = MC13783_ID_SYNC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
},
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
{ 14, 0x0000 }, /* R14 - Power Management 2 */
{ 15, 0x0000 }, /* R15 - Power Management 3 */
{ 18, 0x0000 }, /* R18 - Power Management 6 */
- { 19, 0x945E }, /* R20 - Clock Rates 0 */
+ { 20, 0x945E }, /* R20 - Clock Rates 0 */
{ 21, 0x0C05 }, /* R21 - Clock Rates 1 */
{ 22, 0x0006 }, /* R22 - Clock Rates 2 */
{ 24, 0x0050 }, /* R24 - Audio Interface 0 */
#include <sound/ac97_codec.h>
#include <sound/soc.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "ep93xx-pcm.h"
/*
#include <mach/hardware.h>
#include <mach/ep93xx-regs.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "ep93xx-pcm.h"
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include <mach/ep93xx-regs.h>
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include "imx-pcm.h"
#include <asm/fiq.h>
#include <mach/irqs.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
dev_err(&pdev->dev, "audmux internal port setup failed\n");
return ret;
}
- imx_audmux_v2_configure_port(ext_port,
+ ret = imx_audmux_v2_configure_port(ext_port,
IMX_AUDMUX_V2_PTCR_SYN,
IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
if (ret) {
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include <mach/hardware.h>
#include "imx-ssi.h"
#define DRV_NAME "imx-ssi"
#include <linux/dmaengine.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include "imx-pcm.h"
struct imx_ssi {
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include "kirkwood.h"
#define DRV_NAME "kirkwood-i2s"
#include <linux/slab.h>
#include <sound/soc.h>
#include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <asm/mach-types.h>
#include "../codecs/cs42l51.h"
#include <linux/slab.h>
#include <sound/soc.h>
#include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <asm/mach-types.h>
#include "../codecs/alc5623.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
return ret;
}
- snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
+ ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n");
#include <asm/mach-types.h>
-#include <plat/board-ams-delta.h>
-#include <plat/mcbsp.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <linux/io.h>
#include <linux/slab.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+
+#include <plat/cpu.h>
#include "mcbsp.h"
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <sound/soc.h>
#include <sound/jack.h>
-#include <asm/mach-types.h>
-#include <plat/hardware.h>
-#include <plat/mux.h>
-
#include "omap-dmic.h"
#include "omap-mcpdm.h"
#include "omap-pcm.h"
#include <sound/initval.h>
#include <sound/soc.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "mcbsp.h"
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include "omap-mcpdm.h"
#include "omap-pcm.h"
+#define OMAP44XX_MCPDM_L3_BASE 0x49032000
+
struct omap_mcpdm {
struct device *dev;
unsigned long phys_base;
#include <sound/pcm_params.h>
#include <sound/soc.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include "omap-pcm.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/soc.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "../codecs/tpa6130a2.h"
#include <asm/mach-types.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/board-zoom.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
#include <asm/mach-types.h>
#include <mach/audio.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-ac97.h"
#include <mach/dma.h>
#include <plat/regs-ac97.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include "dma.h"
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_U16_LE |
SNDRV_PCM_FMTBIT_U8 |
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
prtd->params->ops->stop(prtd->params->ch);
break;
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include "dma.h"
#include "idma.h"
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/dma.h>
#include "dma.h"
#include <sound/soc.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "s3c24xx-i2s.h"
#include "s3c24xx_simtec.h"
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/dma.h>
#include "dma.h"
if (dapm->codec->driver->set_bias_level)
ret = dapm->codec->driver->set_bias_level(dapm->codec,
level);
- } else
+ else
+ dapm->bias_level = level;
+ } else if (!card || dapm != &card->dapm) {
dapm->bias_level = level;
+ }
if (ret != 0)
goto out;
continue;
buf = &substream->dma_buffer;
- if (!buf && !buf->area)
+ if (!buf || !buf->area)
continue;
dma_free_writecombine(pcm->card->dev, buf->bytes,
config SND_SOC_TEGRA
tristate "SoC Audio for the Tegra System-on-Chip"
- depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
+ depends on ARCH_TEGRA && TEGRA20_APB_DMA
select REGMAP_MMIO
select SND_SOC_DMAENGINE_PCM if TEGRA20_APB_DMA
help
.name = "Headset detection",
.report = SND_JACK_HEADSET,
.debounce_time = 150,
- .invert = 1,
};
static const struct snd_soc_dapm_widget tegra_alc5632_dapm_widgets[] = {
.fifo_size = 4,
};
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static void tegra_pcm_queue_dma(struct tegra_runtime_data *prtd)
-{
- struct snd_pcm_substream *substream = prtd->substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- struct tegra_dma_req *dma_req;
- unsigned long addr;
-
- dma_req = &prtd->dma_req[prtd->dma_req_idx];
- prtd->dma_req_idx = 1 - prtd->dma_req_idx;
-
- addr = buf->addr + prtd->dma_pos;
- prtd->dma_pos += dma_req->size;
- if (prtd->dma_pos >= prtd->dma_pos_end)
- prtd->dma_pos = 0;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dma_req->source_addr = addr;
- else
- dma_req->dest_addr = addr;
-
- tegra_dma_enqueue_req(prtd->dma_chan, dma_req);
-}
-
-static void dma_complete_callback(struct tegra_dma_req *req)
-{
- struct tegra_runtime_data *prtd = (struct tegra_runtime_data *)req->dev;
- struct snd_pcm_substream *substream = prtd->substream;
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- spin_lock(&prtd->lock);
-
- if (!prtd->running) {
- spin_unlock(&prtd->lock);
- return;
- }
-
- if (++prtd->period_index >= runtime->periods)
- prtd->period_index = 0;
-
- tegra_pcm_queue_dma(prtd);
-
- spin_unlock(&prtd->lock);
-
- snd_pcm_period_elapsed(substream);
-}
-
-static void setup_dma_tx_request(struct tegra_dma_req *req,
- struct tegra_pcm_dma_params * dmap)
-{
- req->complete = dma_complete_callback;
- req->to_memory = false;
- req->dest_addr = dmap->addr;
- req->dest_wrap = dmap->wrap;
- req->source_bus_width = 32;
- req->source_wrap = 0;
- req->dest_bus_width = dmap->width;
- req->req_sel = dmap->req_sel;
-}
-
-static void setup_dma_rx_request(struct tegra_dma_req *req,
- struct tegra_pcm_dma_params * dmap)
-{
- req->complete = dma_complete_callback;
- req->to_memory = true;
- req->source_addr = dmap->addr;
- req->dest_wrap = 0;
- req->source_bus_width = dmap->width;
- req->source_wrap = dmap->wrap;
- req->dest_bus_width = 32;
- req->req_sel = dmap->req_sel;
-}
-
-static int tegra_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct tegra_pcm_dma_params * dmap;
- int ret = 0;
-
- prtd = kzalloc(sizeof(struct tegra_runtime_data), GFP_KERNEL);
- if (prtd == NULL)
- return -ENOMEM;
-
- runtime->private_data = prtd;
- prtd->substream = substream;
-
- spin_lock_init(&prtd->lock);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- dmap = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- setup_dma_tx_request(&prtd->dma_req[0], dmap);
- setup_dma_tx_request(&prtd->dma_req[1], dmap);
- } else {
- dmap = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- setup_dma_rx_request(&prtd->dma_req[0], dmap);
- setup_dma_rx_request(&prtd->dma_req[1], dmap);
- }
-
- prtd->dma_req[0].dev = prtd;
- prtd->dma_req[1].dev = prtd;
-
- prtd->dma_chan = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
- if (prtd->dma_chan == NULL) {
- ret = -ENOMEM;
- goto err;
- }
-
- /* Set HW params now that initialization is complete */
- snd_soc_set_runtime_hwparams(substream, &tegra_pcm_hardware);
-
- /* Ensure that buffer size is a multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto err;
-
- return 0;
-
-err:
- if (prtd->dma_chan) {
- tegra_dma_free_channel(prtd->dma_chan);
- }
-
- kfree(prtd);
-
- return ret;
-}
-
-static int tegra_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- tegra_dma_free_channel(prtd->dma_chan);
-
- kfree(prtd);
-
- return 0;
-}
-
-static int tegra_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
- prtd->dma_req[0].size = params_period_bytes(params);
- prtd->dma_req[1].size = prtd->dma_req[0].size;
-
- return 0;
-}
-
-static int tegra_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- snd_pcm_set_runtime_buffer(substream, NULL);
-
- return 0;
-}
-
-static int tegra_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->dma_pos = 0;
- prtd->dma_pos_end = frames_to_bytes(runtime, runtime->periods * runtime->period_size);
- prtd->period_index = 0;
- prtd->dma_req_idx = 0;
- /* Fall-through */
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- spin_lock_irqsave(&prtd->lock, flags);
- prtd->running = 1;
- spin_unlock_irqrestore(&prtd->lock, flags);
- tegra_pcm_queue_dma(prtd);
- tegra_pcm_queue_dma(prtd);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- spin_lock_irqsave(&prtd->lock, flags);
- prtd->running = 0;
- spin_unlock_irqrestore(&prtd->lock, flags);
- tegra_dma_dequeue_req(prtd->dma_chan, &prtd->dma_req[0]);
- tegra_dma_dequeue_req(prtd->dma_chan, &prtd->dma_req[1]);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t tegra_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- return prtd->period_index * runtime->period_size;
-}
-
-
-static int tegra_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops tegra_pcm_ops = {
- .open = tegra_pcm_open,
- .close = tegra_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = tegra_pcm_hw_params,
- .hw_free = tegra_pcm_hw_free,
- .trigger = tegra_pcm_trigger,
- .pointer = tegra_pcm_pointer,
- .mmap = tegra_pcm_mmap,
-};
-#else
static int tegra_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.dst_addr = dmap->addr;
- slave_config.src_maxburst = 0;
+ slave_config.dst_maxburst = 4;
} else {
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.src_addr = dmap->addr;
- slave_config.dst_maxburst = 0;
+ slave_config.src_maxburst = 4;
}
slave_config.slave_id = dmap->req_sel;
.pointer = snd_dmaengine_pcm_pointer,
.mmap = tegra_pcm_mmap,
};
-#endif
static int tegra_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
{
unsigned long req_sel;
};
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-struct tegra_runtime_data {
- struct snd_pcm_substream *substream;
- spinlock_t lock;
- int running;
- int dma_pos;
- int dma_pos_end;
- int period_index;
- int dma_req_idx;
- struct tegra_dma_req dma_req[2];
- struct tegra_dma_channel *dma_chan;
-};
-#endif
-
int tegra_pcm_platform_register(struct device *dev);
void tegra_pcm_platform_unregister(struct device *dev);
struct ux500_msp **msp_p,
struct msp_i2s_platform_data *platform_data)
{
- int ret = 0;
struct resource *res = NULL;
struct i2s_controller *i2s_cont;
struct ux500_msp *msp;
if (res == NULL) {
dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n",
__func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
- msp->registers = ioremap(res->start, (res->end - res->start + 1));
+ msp->registers = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
if (msp->registers == NULL) {
dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
msp->msp_state = MSP_STATE_IDLE;
dev_err(&pdev->dev,
"%s: ERROR: Failed to allocate I2S-controller!\n",
__func__);
- goto err_i2s_cont;
+ return -ENOMEM;
}
i2s_cont->dev.parent = &pdev->dev;
i2s_cont->data = (void *)msp;
msp->i2s_cont = i2s_cont;
return 0;
-
-err_i2s_cont:
- iounmap(msp->registers);
-
-err_res:
- devm_kfree(&pdev->dev, msp);
-
- return ret;
}
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id);
device_unregister(&msp->i2s_cont->dev);
- devm_kfree(&pdev->dev, msp->i2s_cont);
-
- iounmap(msp->registers);
-
- devm_kfree(&pdev->dev, msp);
}
MODULE_LICENSE("GPL v2");
int processed = urb->transfer_buffer_length / stride;
int est_delay;
+ /* ignore the delay accounting when procssed=0 is given, i.e.
+ * silent payloads are procssed before handling the actual data
+ */
+ if (!processed)
+ return;
+
spin_lock_irqsave(&subs->lock, flags);
est_delay = snd_usb_pcm_delay(subs, runtime->rate);
/* update delay with exact number of samples played */
projects / deliverable / linux.git / commitdiff
